Beruflich Dokumente
Kultur Dokumente
Form A
Form No
(for official use only)
1.
Engineering
3. Region (Regional Office area of jurisdiction: - Ajmer /Kota /Jodhpur /Bikaner /Udaipur),
tick the relevant
Udaipur
4.
Designation & Address of the Person, in whose name, Demand Draft/Bankers Cheque of
grant is to be sent. (Head of Institution/Director/Registrar/ Controller/ Principal/Dean)
Tick the relevant)
Dr.K.K. Chhabra
Name & Class/Year of the Students (indicate clearly the semester in case of
system):
Name
Abhijeet
Sharma
Course
B.Tech.
semester
Semester
VII
6.
Name
Abhijeet
Sharma
8.
Course
B.Tech
Semester
VII
Address
127,nr.Hanuman
mandir,tekri,u
daipur
E-mail ID
Abhijeet.sharma0910@gmail.co
m
E-mail ID:abhijeet.sharma0910@gmail.com
Mobile: 08384963773
C E R T I F I C AT E
The Institution shall provide the Infrastructural & other facilities required for the
project.
The amount sanctioned by Department of Science & Technology, Rajasthan, Jaipur
shall be provided to the concerned Student/Guide timely and funds be utilized for the
purpose for which it has been sanctioned.
The Bank Details of the Institution/College prescribe are mentioned as below :1. Name of the Bank: UCO Bank
2. A/C No:01260110003589
3. IFSC Code:UCBA0000126
4. Mobile number of Guide Teacher: 08947861435
Signature of the Head of Institution
Name and Designation with seal:
Project Summary:
As Water is very important resource therefore
there is a way to conserve it. this project the water supply will
be very efficient.There will not be any problem occur like wasting of water.There is a
way to avoid the problem of wasting of water.
The controller control the opening and closening of valve. Timer circuit will follow the
time given by user.The supply to particular area will be according to the timer and
display of LCD.The main advantage of this to remain active and inactive according
to the user choice.It will be fully automatic.There will not be chance of wasting of
water.Due to controller and LCD display there will be very easy to manage this
system. By municipal man work there is lot of water wastage.Full area depends on
one man for water supply and if that person delay the supply there is to chance of
facing all people.So the main problem is man work of munciplity and wasting of
water.sThe problem of excessive supply and some times very less suplly of water by
worker will be removed. So here it is a project which will remove all of these problems and
in addition with it, this project will remove need of manual work. All the functions will be
operated by microcontroller.
o Methodology:
Block Diagram
WORKING:
Required timing of switching of the valve is set on timer. Programming of the
microcontroller is done in such a way the time in the LCD digital clock matches with
the preset time valves of the water tank will automatically opened. And it remains
open until again the preset time matches with time in LCD digital clock. As this time
again matches with preset time valves will become off.
Preset times are defined on ports of microcontroller. Flow of the
whole working is that firstly time in LCD digital clock is compared with preset time
and when these two becomes equal, a pin of get activated. Thus microcontroller get to
know that it is time to switch the valve. Then microcontroller gives signal to relay and
relay switches the valve.
Time schedule: I started thinking about this project in the month of July
during our summer training. I completed my summer training on 15th July. Up
to 18th July I collected required data and made flow chart.
Now college has been started so I have less time for project. I decided to work
1 hour daily on it. Up to 7th August I made circuit diagram. Now I will stop it
for few days due to assignment work and preparation of midterm examination.
I will start it in September last. That time I will fabricate this circuit on PCB
and like this I will complete this project in the month of January.
1
2
3
4
5
6
7
8
Components used
Quantity
Atmel Ic 8051
2
IC 555 TIMER (8
3
pin)
Transistor
4
Zener diode
4
Battery
2
LED
Capacitors
S.no.
Consumable Component
Resistors
Price Per
Unit
400
200
Total
15
10
300
60
40
600
800
600
C
o
ns
u
m
ab
le:
Total Price
1.
2.
3.
4.
5.
7.
Flux
Desoldered Wire
Circuit Layout Printing
Fecl3
PCB Fabrication
Cyber caf
100/200/600/500/1400/800/-
Total
3600/-
Report Writing
1000 /-
Report writing:
Contingency & other costs:
Contingency & Other Costs
2000