Beruflich Dokumente
Kultur Dokumente
UdelP-1700
polysulfone
General
Material Status
Commercial: Active
Availability
Asia Pacific
Europe
Features
Acid Resistant
Alcohol Resistant
Alkali Resistant
Autoclave Sterilizable
Biocompatible
Chemical Resistant
Detergent Resistant
E-beam Sterilizable
Appliance Components
Appliances
Automotive Electronics
Dental Applications
Electrical Parts
Electrical/Electronic
Applications
Uses
Latin America
North America
Ethylene Oxide Sterilizable
Hydrocarbon Resistant
Food Contact Acceptable
Hydrolytically Stable
Good Dimensional
Radiation (Gamma)
Stability
Good Sterilizability
Good Surface Finish
Good Toughness
Heat Sterilizable
High Heat Resistance
Industrial Parts
Medical Devices
Medical/Healthcare
Applications
Microwave Cookware
RoHS Compliance
RoHS Compliant
Automotive Specifications
BMW GS 93016
Appearance
Colors Available
Forms
Pellets
Processing Method
Revised: 10/22/2014
Resistant
Radiation Sterilizable
Radiotranslucent
Steam Resistant
Steam Sterilizable
Piping
Plumbing Parts
Surgical Instruments
Valves/Valve Parts
NSF STD-511
NSF STD-612
Agency Ratings
Extrusion
Extrusion Blow Molding
Film Extrusion
Injection Blow Molding
Injection Molding
Machining
Pipe Extrusion
Profile Extrusion
Sheet Extrusion
Thermoforming
Page: 1 of 3
UdelP-1700
polysulfone
Physical
Specific Gravity
1.24
Test method
ASTM D792
ASTM D1238
0.70 %
ASTM D955
0.30 %
ASTM D570
Mechanical
Test method
2480 MPa
ASTM D638
70.3 MPa
ASTM D638
Tensile Modulus
Tensile Strength
Tensile Elongation (Break)
50 to 100 %
ASTM D638
Flexural Modulus
2690 MPa
ASTM D790
Flexural Strength
106 MPa
ASTM D790
Test method
69 J/m
ASTM D256
420 kJ/m
ASTM D1822
Impact
ASTM D648
174 C
CLTE - Flow
Electrical
5.6E-5 cm/cm/C
Typical Value Unit
Volume Resistivity
3.0E+16 ohmscm
Dielectric Strength
17 kV/mm
Dielectric Constant
60 Hz
1 kHz
1 MHz
850 C
960 C
875 C
850 C
Test method
UL 94
IEC 60695-2-12
IEC 60695-2-13
135 to 163 C
Drying Time
3.5 hr
50 to 75 %
329 to 385 C
Revised: 10/22/2014
ASTM D149
7.0E-4
1.0E-3
6.0E-3
ASTM D257
ASTM D150
HB
V-0
Drying Temperature
Test method
3.03
3.04
3.02
Flame Rating
1.5 mm, ALL
4.5 mm, NC
Injection
ASTM D696
ASTM D150
Dissipation Factor
60 Hz
1 kHz
1 MHz
Flammability
Test method
Page: 2 of 3
UdelP-1700
polysulfone
Injection
Mold Temperature
121 to 163 C
Notes
Only Udel P-1700 NT 06 and Udel P-1700 NT 11 are NSF 51 listed. Maximum Temperature of Use: 149C (300F)
Only Udel P-1700 NT 11, Udel P-1700 BK 937, Udel P-1700 WH 6417 and Udel P-1700 WH 7407 are NSF 61 listed.
Tested at 82 C (180 F) (Commercial Hot)
SpecialtyPolymers.EMEA@solvay.com
SpecialtyPolymers.Americas@solvay.com
SpecialtyPolymers.Asia@solvay.com
Safety Data Sheets (SDS) are available by emailing us or contacting your sales representative. Always consult the appropriate SDS before using any of
our products.
Neither Solvay Specialty Polymers nor any of its affiliates makes any warranty, express or implied, including merchantability or fitness for use, or accepts
any liability in connection with this product, related information or its use. Some applications of which Solvays products may be proposed to be used
are regulated or restricted by applicable laws and regulations or by national or international standards and in some cases by Solvays recommendation,
including applications of food/feed, water treatment, medical, pharmaceuticals, and personal care. Only products designated as part of the Solviva
family of biomaterials may be considered as candidates for use in implantable medical devices. The user alone must finally determine suitability of any
information or products for any contemplated use in compliance with applicable law, the manner of use and whether any patents are infringed. The
information and the products are for use by technically skilled persons at their own discretion and risk and does not relate to the use of this product in
combination with any other substance or any other process. This is not a license under any patent or other proprietary right.
All trademarks and registered trademarks are property of the companies that comprise the Solvay Group or their respective owners.
2016 Solvay Specialty Polymers. All rights reserved.