Beruflich Dokumente
Kultur Dokumente
Introducing the
3M Automotive
Detailing System
A Complete System that Includes Cleaners,
Dressings, Polishes, Waxes and more.
Long the standard of quality and the preferred paint
finishing system among automotive professionals, 3M offers
a Detailing System for expanded customer
satisfaction, increased worker safety, environmental
compliance and product value.
3M Detailing System
For the Life of Your Car
3Detailing System
Table of Contents
SAFETY STATEMENT
HEAVY CLEANING
EXTERIOR CLEANING
10
INTERIOR CLEANING
12
14
15
17
19
DILUTION RATIOS
21
23
PRODUCT INFORMATION
27
43
ORDERING INFORMATION
45
SAFETY STATEMENT
SAFETY STATEMENT
Aprons
Eye protection
WARNING
CAUTION
WARNING
Fire hazard.
CAUTION
Eye hazard.
Flying particles and dust.
Wear safety glasses with side shields when
drilling or hammering.
air blower to remove leaves from trunk jambs and engine cowlings. Check for loose or missing caps on power
1. ansteering,
power brakes, oil filler, etc.; tighten or replace if necessary. Remove all trash from interior including trunk,
ashtray, and seat folds. Inspect the interior carpet and fabric upholstery for any stains or heavily soiled areas that will
require pre-spotting.
any stained or heavily soiled interior carpet or fabric upholstery surfaces using 3M All Purpose Cleaner
2. Pre-spot
and Degreaser, diluted at 1:15 (1 part concentrate plus 15 parts water) and brush lightly. Pre-spotting and brushing
greatly enhances the effectiveness of the cleaner and reduces the time needed to remove the stains later in the process.
DO NOT use 3M Heavy Duty Wheel Cleaner on glass, engines, anodized wheels and/or wheels with no
coating or with coating cracked or in poor condition. Glass that is stained by the 3M Heavy Duty Wheel
Cleaner can not be repaired and will need to be replaced.
Note: 3M Heavy Duty Wheel Cleaner does not contain hydrofluoric or other strong acids.
4. Apply 3M All Purpose Cleaner and Degreaser, diluted at 1:15 (1 part concentrate plus 15 parts water), to the
engine and engine compartment (lightly), tires, wheels, wheel wells, rocker panels, door and trunk jams, etc. Let
stand for 1 to 2 minutes. Rinse or wipe down engine and engine compartment surfaces with towel.
Note: 3M Heavy Duty Wheel Cleaner works best on brake dust, while 3M All Purpose Cleaner and Degreaser
works best on other soils. For best results, use both products on wheels.
HEAVY CLEANING
rinse all of the exterior areas where 3M Heavy Duty Wheel Cleaner and/or 3M All Purpose Cleaner
2. Thoroughly
and Degreaser have been applied. Rinse or wipe down engine and engine compartment last.
HEAVY CLEANING
EXTERIOR CLEANING
the vehicle using 3M Car Wash Soap diluted at 1:100 (1 part concentrate plus 100 parts water) and a clean,
2. Wash
soft, sponge, towel, wash mitt or 3M Detail Cloth. Start at the top and work downward, scrubbing the areas with
bug spatters last.
Note: 3M Car Wash Soap cleans effectively at a 1 to 100 dilution ratio. Increasing the concentration will increase
the suds but will also be more difficult to rinse off.
EXTERIOR CLEANING
4. Rinse the entire vehicle thoroughly and dry using a chamois or a clean, soft, cotton terry cloth towel.
Optional step if needed or necessary: Remove any tree sap deposits on glass surfaces using 3M Glass Cleaner
and a terry cloth towel. Inspect vehicle after wash to identify any tree sap or similar deposits that were
5. undiluted
not removed by washing.
Least
05954 / 05955
05973 / 05974
38105
05928 / 05929
38116
38133
38111
39030 / 38112
Coarse
Finish
Most
Aggressiveness
Fine
Buffing Pad
Characteristics
Most
Least
05703
05719
05704
05705
05713
05723
05725
Coarse
Finish
Compound / Polish
Characteristics
Aggressiveness
Fine
10
3M Silicone Free
Tire Dressing
11
INTERIOR CLEANING
1:30 (1 part concentrate plus 30 parts water) and a towel or brush. Dry the surface using a clean, dry terry cloth
1. attowel.
Use an air blower with the towel for hard to reach places.
Note: For cleaning heavily soiled vinyl or leather upholstery, use 3M All Purpose Cleaner and Degreaser, diluted at 1:15
(1 part concentrate plus 15 parts water).
clean the vehicles carpet and upholstery using an extraction machine with 3M All Purpose Cleaner and
2. Thoroughly
Degreaser diluted at 1:100).
12
INTERIOR CLEANING
the vehicles windows using 3M Premium Glass Cleaner diluted at 1:14 (1 part concentrate plus 14 parts
4. Clean
water) and a clean, soft, dry cotton terry cloth towel.
CAUTION: DO NOT USE UNDILUTED 3M GLASS CLEANER ON INTERIOR VEHICLE SURFACES.THE
CONCENTRATED PRODUCT WILL STAIN VINYL AND LEATHER, AND MAY STAIN OTHER SURFACES.
Note: - In hot, humid weather conditions spray and clean one window at a time
- Use 3M Glass Cleaner concentrate undiluted for removing tree sap from exterior windows.
inspect the vehicle exterior. Use a 3M Perfect-It Detailing Cloth and/or 3M Perfect-It Gloss
5. Thoroughly
Enhancer for final detailing.
13
3M Customer Pre-Delivery
Detailing Checklist
Pre-Delivery Cleaning and Final Inspection:
Responsibility:
______________
______________
______________
______________
______________
______________
______________
______________
______________
______________
______________
______________
______________
______________
______________
______________
______________
______________
______________
______________
______________
14
1. Inspect vehicle
2. Pre-Spot heavily soiled interior spots with APC
STEP 2
HD Wheel Cleaner (Do not use on glass, engines, anodized wheels and/or
3. Apply
wheels with no coating or with coating cracked or in poor condition.)
- 3M Heavy Duty Wheel Cleaner (PN 38374/38375)
STEP 3
STEP 7
15
STEP 9
STEP 10
STEP 14
STEP 15
STEP 16
16
DRY
OR
4. Polishing Step
WET
3. Compounding Step
17
5. Waxing Step
3M Perfect-It
Foam Pad
CORRECT
3M Perfect-It
Foam Pad
INCORRECT
3M Superbuff
Buffing Pad
CORRECT
3M Superbuff
Buffing Pad
INCORRECT
18
Paint Condition
Diagnosis
Virtually no imperfections
Heavy Swirls
Fine Scratches
Mild Stains
Light Oxidation
Medium Scratches
Car Wash Scratches
Heavy Stains
Medium Oxidation
Coarse Scratches
Heavy Oxidation
Deep Scratches
Excessive Overspray
3M Trizact
Hookit II Foam Discs
02075
1
3M Hookit II
Finishing Film Discs
-or3M Imperial
Wetordry Paper
Sheets
00850
02021
2
19
Repair Procedure
Compounding
Polishing
Waxing
3M Detail Wax
-or3M Perfect-It Show
Car Paste Wax
-or3M Performance
Finish
-and3M Perfect-It
III Detailing Cloths
05725
3M Detail Polish #108
-and05751
3M Perfect-It Foam
Polishing Pad
-or3M Perfect-It 3000
Ultrafina SE
-and3M Perfect-It Ultrafina
Foam Polishing Pad
5
3M Detail Polish #208
-and3M Perfect-It Foam
Compounding Pad- 8 in.
38133
06068
05723 38116
3M Detail Wax
-or3M Perfect-It Show
Car Paste Wax
-or3M Performance
Finish
-and3M Perfect-It
III Detailing Cloths
3M Detail Wax
-or3M Perfect-It Show
Car Paste Wax
-or3M Performance Finish
-and3M Perfect-It III
Detailing Cloths
06016
06017
39526
38111
38112
06016
06017
39526
38111
38112
06016
06017
39526
38105
5
05719 38105
3M Detail Compound #308
05703
-and3M Perfect-It III Compounding Pad 05704
05723
-or3M Superbuff III Buffing Pad
3
-or3M Superbuff III 2 Plus 2
Buffing Pad
-or3M Perfect-It Foam Compounding Pad- 8 in.
5
3M Detail Wax
06016
-or06017
3M Perfect-It Show 39526
Car Paste Wax
-or3M Performance Finish
-and3M Perfect-It III
Detailing Cloths
05725 38133
3M Detail Polish #108
-and05751 06068
3M Perfect-It Foam
Polishing Pad
-or3M Perfect-It 3000
Ultrafina SE
-and3M Perfect-It Ultrafina
5
Foam Polishing Pad
05725 38133
3M Detail Polish #108
05751 06068
-and3M Perfect-It Foam
Polishing Pad
-or3M Perfect-It 3000
Ultrafina SE
-and3M Perfect-It Ultrafina
Foam Polishing Pad
5
38111
38112
05725 38133
3M Detail Polish #108
-and05751 06068
3M Perfect-It Foam
Polishing Pad
-or3M Perfect-It 3000
Ultrafina SE
-and3M Perfect-It Ultrafina
Foam Polishing Pad
5
05719 05704
05703 05723
38105
05725 38133
05751 06068
38111
38112
38111
38112
3M Detail Wax
-or3M Perfect-It Show
Car Paste Wax
-or3M Performance
Finish
-and3M Perfect-It
III Detailing Cloths
06016
06017
39526
3M Detail Wax
-or3M Perfect-It Show
Car Paste Wax
-or3M Performance
Finish
-and3M Perfect-It
III Detailing Cloths
06016 38111
06017 38112
39526
3M Detail Wax
06016 38111
-or06017 38112
3M Perfect-It Show 39526
Car Paste Wax
-or3M Performance
Finish
-and3M Perfect-It
III Detailing Cloths
4 For Dual Action Sander Application use Pad PN 05251 and Pad PN 05739 or PN 05732
5 Use with PN 05718 or PN 05717
20
DILUTION RATIOS
21
SPRAY BOTTLE
AUTOMATIC DILUTER
BULK CONCENTRATE
Label Mix
Diluter Pre-mix
Shop Mix
DILUTER USAGE
Description
Diluter tip kit (5 kits with 14 sizes)
synthetic rubber foot valve (blue color 5/kit)
PD104
PD105
PD106
PD107
PD108
PD109
PD110
PD111
Safety Information
WARNING
Before handling or using detailing chemicals, be sure to
read the Material Safety Data Sheet (MSDS) for health
hazard data, precautionary information, and suggested
first aid.
WARNING
Fire hazard.
Window Cleaner concentrate solution is flammable.
Keep away from open flame; no smoking nearby.
CAUTION
Eye irritation -- wear eye protection when dispensing
solutions and when replacing concentrate bottle solutions.
Skin irritation -- wear rubber gloves when dispensing
solutions and when replacing concentrate bottle solutions.
CAUTION
Eye hazard. Flying particles and dust.
Wear safety glasses with side shields
when drilling or hammering.
22
DILUTER USAGE
CAUTION
Eye hazard.
Flying particles and dust.
Wear safety glasses with side shields when drilling or hammering.
4. Drill holes for screws.
- Use a 5/16 drill bit to make holes for the 3 wall anchors. You may need to use a masonry drill bit for some types of wall.
5. Insert wall anchors.
- Hammer the anchors flush to the wall.
6. Insert top two screws
- Screw in the top two screws, but leave the heads out about 1/4 from the wall.
- Do not install the third screw yet.
7. Secure the backplate to the wall
- Do not over tighten the screws.
- Place the console backplate on the wall. The keyholes at the top should fit over the two screw heads in the wall and slip
down into the keyhole notches.
- Install the bottom screw and then tighten all three screws.
8. Attach the water supply.
- Thread the end of a standard garden hose to the connector on the right side of the control console (as you face the unit).
- Note: The cap on the connector on the left side (as you face the unit) should normally remain in place.
IMPORTANT
Inspect to be sure the tubes are attached securely. The tube for
supplying glass cleaner concentrate to the diluter is a special tube and
must be used for the glass cleaner concentrate. Do not switch tubes.
9. Snap the front cover into place.
- Press in on the two side tabs while pushing the cover on until it snaps into place.
10. Arrange concentrate containers below diluter so hoses are neatly arranged.
- Each supply tube has a label on it to identify the concentrate product it supplies.
- Insert each concentrate supply tube into its correct concentrate container and fasten the lid.
23
DILUTER USAGE
IMPORTANT
Make sure the supply tubes are inserted into their correct
concentrate product containers.
Using the Diluter
Dispense Heavy Duty Wheel Cleaner:
- Place a correctly labeled detailing spray bottle onto the corresponding product tube coming out the bottom of the
diluter console.
- Press and hold correct button until bottle is filled.
Dispense Glass Cleaner or All Purpose Cleaner & Degreaser:
- Place a correctly labeled detailing spray bottle onto the corresponding product tube coming out the bottom of the
diluter console.
- Press and hold correct button until bottle is filled.
Dispense Car Wash Soap:
- The long tube on the right bottom of the console is for dispensing soap into a bucket on the floor.
Place the end of the tube in a bucket.
- Press and hold the right button, labeled Car Wash Soap, until youve dispensed the amount you want.
The chart above shows the dilution ratios of water to various 3M detailing products. The eductor, labeled at the top,
can be brown, grey, or yellow. The eductor is the part in the assembly that the hoses attach to. Find your eductor color and look below it to find the product you are using. In the column below your product, you will
see various dilution ratios. Find your ratio and follow it left to determine which dilution tip color you
will use. Example: Brown eductor with a black dilution tip has a dilution ratio of 1:2 of 3M
Heavy Duty Wheel Cleaner to water.
Depending on your hose fitting size you may have a snap tip or a threaded tip. If you
are using a threaded dilution tip, it is important that you screw hand tight plus a
1/4 turn. If you are using a snap dilution tip, fully insert it into the barbed
fitting (be sure not to squeeze the tip).
**Requires 3M Diluter Conversion Kit for Glass Cleaner
(PD111) (Shopware 1-800-877-9344)
24
DILUTER USAGE
SOLUTION:
Ensure all fittings are very tight and secure. Replace foot valve
on the end of the hose. Ensure adequate water pressure
Replace foot valve on the end of the hose. Note: Use gray
foot valve for 3M Glass Cleaner and a blue foot valve for
all other products.
25
DILUTER USAGE
PROBLEM:
SOLUTION:
No discharge
No concentrate draw
a. Clean or replace.
b. Clean (descale)** or replace.
c. Minimum 20 PSI (with water running) required to operate
unit properly.
d. Push tube firmly onto eductor discharge hose barb; be
sure inner discharge tube is installed and has flooding ring.
e. Replace with full container.
f. Tighten, but do not overtighten.
g. Disconnect inlet water line and clean strainer.
26
PRODUCT INFORMATION
PAINT
SHOP
SAFE!
1 gallon bottle
5 gallon pail
55 gallon drum
27
PRODUCT INFORMATION
PAINT
SHOP
SAFE!
1 gallon bottle
5 gallon pail
55 gallon drum
28
PRODUCT INFORMATION
PAINT
SHOP
SAFE!
3M Glass Cleaner
A solvent based water dilutable cleaner concentrate.
- PN 38399 (38099)*
- PN 38300 (38100)*
- PN 38101
1 gallon can
5 gallon pail
55 gallon drum
(special order)
29
PRODUCT INFORMATION
PAINT
SHOP
SAFE!
1 gallon can
5 gallon pail
30
PRODUCT INFORMATION
PAINT
SHOP
SAFE!
1 gallon bottle
5 gallon pail
55 gallon drum
31
PRODUCT INFORMATION
PAINT
SHOP
SAFE!
3M Adhesive Remover*
A solvent based product that quickly removes adhesive residue.
- PN 38080
- PN 38081
- PN 38082
1 gallon can
5 gallon pail
55 gallon drum
3M Adhesive Remover is a ready-to-use blend of petroleum solvents designed to remove adhesive deposits from exterior vehicle
surfaces. To minimize the possibility of staining, do not apply in
direct sunlight or onto a hot surface.
Directions for Use:
1. Soak cloth with 3M Adhesive Remover and apply onto
the surface.
2. Rub thoroughly with a soft cloth and remove the excess
material with a clean, dry, soft cloth. Repeat as necessary.
3. For stubborn deposits, apply material, allow to soak for one
minute and scrub.
Tips:
- For difficult oil-based stains on fabric apply 3M Adhesive Remover, scrub, and clean using 3M All Purpose Cleaner
and Degreaser or 3M Multi-Purpose Cleaner.
- Use 3M Premium Glass Cleaner concentrate undiluted for removing tree sap from exterior windows.
Product Safety and Health Information Source:
Material Safety Data Sheet
(MSDS 08-4315-1) or
3M Automotive Aftermarket Division
3M Center, Bldg. 223-6N-01
St. Paul, MN 55144-1000
Telephone: 1-877-MMM-CARS (1-877-666-2277) or (651) 737-6501
*Not for sale in California. Suggested replacement: 3M General Purpose Adhesive Cleaner (PN 08984 or 08986 or 08987)
32
PRODUCT INFORMATION
3M Interior Dressing
A ready-to-use water based silicone dressing.
- PN 38086
- PN 38087
1 gallon bottle
5 gallon pail
33
PRODUCT INFORMA-
1 gallon bottle
5 gallon pail
55 gallon drum
34
PRODUCT INFORMATION
3M Tire Dressing
A solvent based ready-to-use silicone tire dressing.
- PN 38127
- PN 38128
- PN 38129
1 gallon can
5 gallon pail
55 gallon drum
35
PRODUCT INFORMATION
PAINT
SHOP
SAFE!
1 gallon can
5 gallon pail
36
PRODUCT INFORMATION
PAINT
SHOP
SAFE!
37
PRODUCT INFORMATION
1 gallon bottle
38
PRODUCT INFORMATION
1 gallon bottle
39
PRODUCT INFORMATION
1 gallon bottle
40
PRODUCT INFORMATION
3M Detail Wax
A carnauba wax based durable liquid wax. Contains silicones.
- PN 38111
1 gallon
1 gallon bottle
5 gallon pail
55 gallon drum (special order)
41
PRODUCT INFORMATION
3M Performance Finish
A reactive silicone paint protector. Contains silicones.
- PN 38112
- PN 39030
quart bottle
pint bottle
42
2.
3.
4.
5.
6.
43
b. Glass
c. Engines
d. All of the Above
The two recommended dilution ratios for 3M All Purpose Cleaner & Degreaser are:
a. 1:15 and 1:25
b. 1:12 and 1:25
c. 1:15 and 1:30
d. 1:10 and 1:20
e. 1:8 and 1:16
Which of the following is a concern or a potential problem when buffing with a foam pad?
a. Easy to use
b. Runs hotter
c. No lint
d. Minimal swirls
e. None of the above
What product would you use to remove a coffee stain from a carpeted floor mat?
a. 3M All Purpose Cleaner & Degreaser diluted 1:30
b. 3MAll Purpose Cleaner & Degreaser diluted 1:15
c. 3M Heavy Duty Wheel Cleaner
d. 3M Gloss Enhancer
e. None of the above
What product would you recommend for removing hard water spots from a painted or plastic surface?
a. 3M Heavy Duty Wheel Cleaner diluted 1:2 (Do not use on glass, engines, anodized wheels and/or
wheels with no coating or with coating cracked or in poor condition.)
b. 3M All Purpose Cleaner & Degreaser diluted 1:15
c. 3M Heavy Duty Wheel Cleaner undiluted (Do not use on glass, engines, anodized wheels and/or wheels
with no coating or with coating cracked or in poor condition.)
d. 3M All Purpose Cleaner & Degreaser diluted 1:30
e. None of the above
If a product is diluted 1:8 and costs $18 per gallon, what is the cost per diluted gallon?
a. $2.25
b. $2.00
c. $1.75
d. $1.50
e. None of the above
is diluted 1:15 and costs $24 per gallon, what is the cost per diluted gallon?
7. If a product
a. $2.25
8.
9.
10.
11.
12.
13.
14.
15.
b. $2.00
c. $1.75
d. $1.50
e. None of the above
Silicones are not recommended for use in a body shop environment:
q T
q F
3M Detail Polish 108 cuts more than 3M Detail Compound 308:
q T
q F
The recommended product for removing tar from a painted surface is:
a. 3M Heavy Duty Wheel Cleaner diluted 1:2 (Do not use on glass, engines, anodized wheels and/or
wheels with no coating or with coating cracked or in poor condition.)
b. 3M All Purpose Cleaner & Degreaser diluted 1:15
c. 3M Heavy Duty Wheel Cleaner undiluted (Do not use on glass, engines, anodized wheels and/or
wheels with no coating or with coating cracked or in poor condition.)
d. 3M All Purpose Cleaner & Degreaser diluted 1:30
e. None of the above
The recommended product for removing bug spatters is:
a. 3M Heavy Duty Wheel Cleaner diluted 1:2 (Do not use on glass, engines, anodized wheels and/or
wheels with no coating or with coating cracked or in poor condition.)
b. 3M All Purpose Cleaner & Degreaser diluted 1:15
c. 3M Heavy Duty Wheel Cleaner undiluted (Do not use on glass, engines, anodized wheels and/or
wheels with no coating or with coating cracked or in poor condition.)
d. 3M All Purpose Cleaner & Degreaser diluted 1:30
e. None of the above
When detailing a vehicle, it is recommended to begin washing it from the bottom because that is the dirtiest part:
q T
q F
The polishes and compounds can or may be used with wool pads:
q T
q F
There is no difference between 3M Heavy Duty Wheel Cleaner and competitive wheel cleaners:
q T
q F
Trizact Abrasive Discs must always be used damp:
q T
q F
44
ANSWERS: 1. d 2. c 3. b 4. b 5. a 6. b 7. d
8. T 9. F 10. e 11. b 12. F 13. T 14. F 15. T
ORDERING INFORMATION
Ordering Information
Exterior Cleaners
Part
No.
| Product
| Name
| Container
| Size
| Cont.
| Per Case
38350
38351
38052
38070
38374
38375
38076
38377
38378
38079
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Gallon
5-Gallon Pail
55-Gallon Drum
1 Jar
Gallon
5-Gallon Pail
55-Gallon Drum
Gallon
5-Gallon Pail
55-Gallon Drum
4
1
1
6
4
1
1
4
1
1
| Product
| Name
| Container
| Size
| Cont.
| Per Case
| Gallon
|
| 5-Gallon Pail
|
| 55-Gallon Drum |
4
1
1
Exterior Dressings
Part
No.
| Product
| Name
| Container
| Size
| Cont.
| Per Case
38124
38125
38126
38127
38128
38129
38327
38328
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
45
Gallon
5-Gallon Pail
55-Gallon Drum
Gallon
5-Gallon Pail
55-Gallon Drum
Gallon
5-Gallon Pail
4
1
1
4
1
1
4
1
ORDERING INFORMATION
Interior Cleaners
Part
No.
| Product
| Name
| Container
| Size
| Cont.
| Per Case
38350
38351
38052
38095
38399
38300
38101
38221
38222
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Gallon
5-Gallon Pail
55-Gallon Drum
Gallon
Gallon
5-Gallon Pail
55-Gallon Drum
Gallon
5-Gallon Pail
4
1
1
4
4
1
1
4
1
Interior Dressing
Part
No.
| Product
| Name
| Container
| Size
| Cont.
| Per Case
| Gallon
| 5-Gallon Pail
|
|
4
1
| Product
| Name
| Container
| Size
| Cont.
| Per Case
38105
38111
38113
38114
38115
38116
38133
38112
39030
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Gallon
Gallon
Gallon
5-Gallon Pail
55-Gallon Drum
Gallon
Gallon
Quart
Pint
4
4
4
1
1
4
4
6
6
Detailing Accessories
Part
No.
| Product
| Name
37721
37712
37716
37717
37718
37720
|
|
|
|
|
|
| Container
| Size
|
|
|
|
|
|
1 Diluter
1 Diluter
1 Bottle
1 Spray Head
1 Spray Head
1 Bottle & Top
| Cont.
| Per Case
|
|
|
|
|
|
1
1
24
24
24
24
46
ORDERING INFORMATION
Ordering Information
(CONTINUED)
Sanding
Part
No.
| Product
| Name
| Grade
|
| Sheets or | Quantity
| Pads/Box | Per Case
00850
00868
02023
02044
02045
02075
05274
05251
05291
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
P1500
P1200
Micro Fine 1500
Micro Fine 2000
Micro Fine 2500
P3000
Pad
Painters Pad
Pad
50
50
50
50
50
15
6 Pad
6 Pad
6 Pad
|
|
|
|
|
|
|
|
|
4
4
5
5
5
4
10
10
10
Compounding Pads
47
Part
No.
| Product
| Name
| Items
| Per Unit
| Quantity
| Per Case
05703
05704
05710
05717
05718
05719
05723
05737
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pad
Pad
adapter
Pad
Pad
Pad
2 Pads/Bag
1 Pad/Bag
6
6
10
1
1
24
12
6
ORDERING INFORMATION
Polishing Pads
Part
No.
| Product
| Name
05717
05718
05733
05751
05725
05729
05739
05732
05738
|
|
|
|
|
|
|
|
|
| Items
| Per Unit
| Quantity
| Per Case
|
|
|
|
|
|
|
|
|
1
1
6
6
6
12
12
12
6
Detail Cloths
Part
No.
| Product
| Name
| Items
| Per Unit
| Quantity
| Per Case
| 6 Cloths/Bag
| 50 Cloths/Bag
| 6 Cloths/Bag
|
|
|
6
1
6
48
ORDERING INFORMATION
Ordering Information
(CONTINUED)
| Product
| Name
60-4400-7328-0
60-4400-7329-8
60-4400-9926-9
60-4400-9925-1
60-4400-7339-7
60-4400-7576-4
60-4400-7346-2
60-4400-7341-3
60-4400-7331-4
60-4400-7343-9
60-4400-7340-5
60-4400-8404-8
60-4400-7344-7
60-4400-7332-2
60-4400-7614-3
60-4400-7345-4
60-4400-7342-1
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
49
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
50
3
Automotive Aftermarket Division
3M Center, Building 223-6N-01
St. Paul, MN 55144-1000
www.3M.com/automotive
3M is a trademark of 3M
3M 2007
All rights reserved
60-4400-9939-2