Beruflich Dokumente
Kultur Dokumente
O01 DT 3/5
3/17/03
8:14 AM
Page 1
412031.O01 DT 3/5
3/17/03
8:14 AM
Page 2
T&B offers a solution for a highly reliable connection method for magnet wire. It
eliminates welding, no longer requires removal of insulation, and it
can be installed in seconds. No special operator skills are needed.
The connector and matching tooling do the entire job. To meet the
essential requirements of magnet wire
Dragon Tooth
connectors
connections, T&B offers the insulation piercing
proudly earn
DRAGON TOOTH compression connector.
the title
Fierce
Pierce."
Typical Applications
Termination
Parallel Splice
Splices and fork terminals accommodate wire sizes 24 AWG to 12 AWG in a variety
of combinations, including combining magnet wire with stripped wire lead. For
solid or stranded wire #20 to #4/0 AWG.
Dragon Tooth
Larger connectors accommodate circular mil range from 50,000 to 460,000 cm.
Tap
Teeth on the transition washers penetrate aluminum and copper oxides, enabling
copper to aluminum connections to be made in a bolted joint without the use of
inhibiting compounds. Transition washers also accommodate the difference in
thermal expansion between copper and aluminum, and enhance the efficiency of
bolted grounding connections.
Connector and matching tooling do the entire job.
O2
2002 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412031.O01 DT 3/5
3/17/03
8:14 AM
Page 3
www.tnb.com
O3
Dragon Tooth
2002 Thomas & Betts Corporation. Specifications are subject to change without notice.
O
These connectors are
made of copper alloy,
tin plated, with a
number of teeth on the
inner surface. When the
connector is compressed onto
an insulated magnet wire, the sharp,
hardened teeth penetrate the insulation
and the oxide and bite into the conductor. An
electrically sound, low-resistance connection is
established as a result of the combination of
high pressures at the tip and edges of the teeth,
and the sliding action between the teeth and the
conductor.
412031.O01 DT 3/5
3/17/03
8:14 AM
Page 4
Splices
Rectangular
Wire Range, Inches
Circular
Mil Area
Round Wire
Range, AWG
Min Max
Thickness
Width
.22
21 (4) - 12 (2)
1000
.03
.09
.09
.09
468 - 1,724
1,277 - 4,205
2,985 - 6,687
5,162 - 12,330
32 - 24**
26 - 17**
24 - 14**
16 - 12
.02 - .04
.02 - .05
.05 - .08
.02 - .09
.02 - .10
.05 - .16
8400
3000
3000
2500
.11
.16
.25
.25
.50
.55
.03
.10
.10
.13
.12
.20
128 - 2,028
808 - 5,162
2,048 - 9,110
2,580 - 12,330
12,960 - 30,550
36,120 - 86,000
32 - 24**
26 - 17**
24 - 15**
16 - 12
18 - 14
16 - 5
.02 - .04
.02 - .05
.05 - .08
.04 - .06
.08 - .18
.02 - .10
.02 - .11
.05 - .16
.06 - .38
.08 - .38
1000
1000
1000
1000
100
100
.63
.69
.38
.53
.17
.25
4,110 - 20,760
10,380 - 52,480
14(a) - 10
12(b) - 2(e)
.08 - .09
.10 - .16
.08 - .18
.10 - .26
250
100
204210SH
22L009H
.69
.70
.53
.55
.47
.38
20,760 - 104,960
72,000 - 132,000
12(c) - 2(d)
16 - 5
.10 - .16
.08 - .18
.10 - .26
.08 - .38
100
100
220015
220019
220023
1.50
1.50
1.75
.88
.88
.88
(e)
(e)
(e)
50,000 - 115,000
110,000 - 175,000
110,000 - 230,000
.100 - .175
.175 - .325
.175 - .325
.300 - .625
.300 - .625
.300 - .625
50
25
25
314118S
.63
.38
.13
3,260 - 12,330
15 - 13
.05 - .06
.05 - .18
250
220016
220020
220024
3.13
3.13
3\.63
.88
.88
.88
(e)
(e)
(e)
100,000 - 230,000
220,000 - 350,000
220,000 - 460,000
.100 - .175
.175 - .325
.175 - .325
.300 - .625
.300 - .625
.300 - .625
25
25
25
Dimensions
Catalog
Number
C*
214420
.43
.25
220004
220001
220002-TB
220006
.17
.34
.34
.47
.11
.17
.25
.25
22L004
22L001
22L002
22L006
22L008
22L009
22L010
.15
.32
.32
.45
.70
.70
210214S
204210S
E
F
Pkg.
Qty.
NOTE: Wire sizes and combinations shown have been tested to and meet or exceed Thomas & Betts specifications. Connectors may be suitable for
other wire sizes or combinations. Thomas & Betts sells these connectors with the understanding that the user will perform necessary tests to
determine their suitability for the intended purpose.
Dragon Tooth
O
I
A
B
O4
2002 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412031.O01 DT 3/5
3/17/03
8:14 AM
Page 5
Catalog
Number
Dimensions, Inches
Rectangular
Round Wire
Wire Range, Inches
Range,
AWG
Thickness
Width
Stud
Size
Circular
Mil Area
20,000 - 105,000
5 - 13
Lower Half
.08 - .15
.08 - .49
Upper Half
.25 max
.75 max.
250
5 - 13
5 - 13
For Conn
210214MT
25
25
210214MT
.63
.63
.75
.25
.19
210MT14
210MT38
1/4
3/8
1.00
1.00
1.44
1.44
.82
.82
.09
.09
204210MT
.69
.94
1.03
.25
.25
204MT14
204MT38
1.00
1.00
1.44
1.44
.91
.91
.12
.12
1/4
3/8
90,000 - 215,000
Pkg.
Qty.
3 - 10
3 - 10
3 - 10
Lower Half
.10 - .25
.10 - .92
Upper Half
.25 max
1.03 max.
For Conn
204210MT
100
25
25
(a) This space may be used for terminal tongue insert, stripped stranded copper wire, stripped copper magnet wire, or left empty.
NOTE: Wire sizes and combinations shown have been tested to and meet or exceed Thomas & Betts specifications. Connectors may be suitable for
other wire sizes or combinations. Thomas & Betts sells these connectors with the understanding that the user will perform necessary tests to
determine their suitability for the intended purpose.
E
A
D
E
O
Dragon Tooth
2002 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
O5
412031.O01 DT 3/5
3/17/03
8:14 AM
Page 6
*E*
Circular
Mil Area
314125
314123
10
1/4
.38
.38
.31
.31
.56
.56
.04
.04
.27
.27
3,260 - 12,330
3,260 - 12,330
15 - 13
15 - 13
.05 - .06
.05 - .06
.05 - .18
.05 - .18
250
250
210219
210217
210216
8
10
1/4
.38
.38
.38
.56
.56
.56
1.22
1.22
1.41
.41
.41
.41
.17
.17
.17
4,110 - 20,760
4,110 - 20,760
4,110 - 20,760
14(a) - 10
14(a) - 10
14(a) - 10
.08 - .09
.08 - .09
.08 - .09
.08 - .18
.08 - .18
.08 - .18
250
250
250
204217
204212
10
1/4
.53
.53
.61
.61
1.58
1.58
.50
.50
.25
.25
10,380 - 52,480
10,380 - 52,480
12(b) - 2(c)
12(b) - 2(c)
.10 - .16
.10 - .16
.10 - .26
.10 - .26
100
100
210214-1
210214-2
210214-3
1/4
5/16
3/8
.38
.38
.38
.56
.56
.56
1.41
1.41
1.41
.69
.69
.69
.17
.17
.17
4,110 - 20,760
4,110 - 20,760
4,110 - 20,760
14(a) - 10
14(a) - 10
14(a) - 10
.08 - .09
.08 - .09
.08 - .09
.08 - .18
.08 - .18
.08 - .18
250
250
250
204210-1
204210-2
204210-3
204210-5
1/4
5/16
3/8
1/2
.53
.53
.53
.53
.61
.61
.61
.61
1.58
1.58
1.58
1.58
.81
.81
.81
.81
.25
.25
.25
.25
10,380 - 52,480
10,380 - 52,480
10,380 - 52,480
10,380 - 52,480
12(b) - 2(c)
12(b) - 2(c)
12(b) - 2(c)
12(b) - 2(c)
.10 - .16
.10 - .16
.10 - .16
.10 - .16
.10 - .26
.10 - .26
.10 - .26
.10 - .26
100
100
100
100
204210-1H
204210-3H
1/4
3/8
.53
.53
.61
.61
1.58
1.58
.81
.81
.47
.47
20,760 - 104,960
20,760 - 104,960
12(b) - 2(c)
12(b) - 2(c)
.10 - .16
.10 - .16
.10 - .26
.10 - .26
100
100
220017
220018
220021
220022
220025
220026
3/8
1/2
3/8
1/2
3/8
1/2
.88
.88
.88
.88
.88
.88
1.50
1.50
1.50
1.50
1.50
1.50
2.76
2.76
2.76
2.76
2.76
2.76
1.06
1.06
1.06
1.06
1.06
1.06
(d)
(d)
(d)
(d)
(d)
(d)
50,000 - 115,000
50,000 - 115,000
110,000 - 175,000
110,000 - 175,000
110,000 - 230,000
110,000 - 230,000
.100 - .175
.100 - .175
.175 - .250
.175 - .250
.175 - .325
.175 - .325
.300 - .625
.300 - .625
.300 - .625
.300 - .625
.300 - .625
.300 - .625
25
25
25
25
25
25
22R061**
22R081**
22R101**
6
8
10
.16
.16
.16
.32
.32
.32
.78
.78
.78
.30
.30
.30
.10
.10
.10
404 - 4100
404 - 4100
404 - 4100
15 - 24
15 - 24
15 - 24
.02 - .05
.02 - .05
.02 - .05
.02 - .10
.02 - .10
.02 - .10
1000
1000
1000
22R086
22R106
8
10
.25
.25
.45
.45
.91
.91
.30
.30
.13
.13
2,580 - 12,330
2,580 - 12,330
12 - 16
12 - 16
.05 - .08
.05 - .08
.05 - .16
.05 - .16
1000
1000
22R146
1/4"
.25
.45
.95
.42
.13
2,580 - 12,330
12 - 16
.05 - .08
.05 - .16
1000
E
F
F
Rectangular
Round Wire
Wire Range, Inches
Range,
AWG
Thickness
Width
Stud
Size
Dimensions, Inches
Catalog
Number
Pkg.
Qty.
22L010*
*Reference dimension. See installing die illustration for gauging. (a) Four wires max. (b) Six wires max. (c) Conductors heavier than 6 AWG require
special dies. Contact Thomas & Betts for assistance. (d) Crimping dies may not bottom. Connector height will depend on number and size of wires in
barrel. Pump must deliver 9800 p.s.i. minimum.
NOTE: Wire sizes and combinations shown have been tested to and meet or exceed Thomas & Betts specifications. Connectors may be suitable for
other wire sizes or combinations. Thomas & Betts sells these connectors with the understanding that the user will perform necessary tests to
determine their suitability for the intended purpose.
**22 - 24 AWG and equivalent rectangular c.m.a., copper only.
O
D
Dragon Tooth
B
E
C
A
O6
2002 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412031.O01 DT 3/5
3/17/03
8:14 AM
Page 7
Dimensions, Inches
Rectangular
Round Wire
Wire Range, Inches
Range,
AWG
Thickness
Width
Stud
Size
*E*
Circular
Mil Area
22F061**
22F081**
22F101**
6
8
10
.16
.16
.16
.32
.32
.32
.78
.78
.78
.30
.30
.30
.10
.10
.10
404 - 4100
404 - 4100
404 - 4100
15 - 24
15 - 24
15 - 24
.02 - .05
.02 - .05
.02 - .05
.02 - .10
.02 - .10
.02 - .10
1000
1000
1000
22F066
22F086
22F106
6
8
10
.25
.25
.25
.45
.45
.45
.91
.91
.91
.30
.30
.30
.13
.13
.13
2,580 - 12,330
2,580 - 12,330
2,580 - 12,330
12 - 16
12 - 16
12 - 16
.05 - .08
.05 - .08
.05 - .08
.05 - .16
.05 - .16
.05 - .16
1000
1000
1000
210219F
210217F
210216F
6
8
10
.25
.25
.25
.45
.45
.45
.91
.91
.91
.30
.30
.30
.13
.13
.13
2,580 - 12,330
2,580 - 12,330
2,580 - 12,330
12 - 16
12 - 16
12 - 16
.05 - .08
.05 - .08
.05 - .08
.05 - .16
.05 - .16
.05 - .16
1000
1000
1000
Pkg.
Qty.
Disconnects
A
Catalog
Number
Tab
Size
Dimensions, Inches
Rectangular
Round Wire
Wire Range, Inches
Range,
AWG
Thickness
Width
*E*
Circular
Mil Area
Pkg.
Qty.
.32
.45
.76
.91
.25
.25
.10
.13
404 - 4100
2,580 - 12,330
15 - 24
12 - 16
.02 - .05
.05 - .08
.02 - .10
.05 - .16
1000
1000
.32
.45
.79
.91
.25
.25
.10
.13
404 - 4100
2,580 - 12,330
15 - 24
12 - 16
.02 - .05
.05 - .08
.02 - .10
.05 - .16
1000
1000
B
*Reference dimension. See installing die illustration for gauging. (a) Four wires max. (b) Six wires max. (c) Conductors heavier than 6 AWG require
special dies. Contact Thomas & Betts for assistance. (d) Crimping dies may not bottom. Connector height will depend on number and size of wires in
barrel.
NOTE: Wire sizes and combinations shown have been tested to and meet or exceed Thomas & Betts specifications. Connectors may be suitable for
other wire sizes or combinations. Thomas & Betts sells these connectors with the understanding that the user will perform necessary tests to
determine their suitability for the intended purpose.
**22-24 AWG and equivalent rectangular c.m.a., copper only.
C
A
O
Dragon Tooth
2002 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
O7
412031.O01 DT 3/5
3/17/03
8:14 AM
Page 8
Catalog
Number
Stud
Size
*E*
Circular
Mil Area
204T14
204T38
1/4
3/8
1.62
1.62
1.22
1.22
.70
.70
.50
.50
.22
.22
10,310 - 52,480
10,310 - 52,480
Rectangular
Round Wire
Wire Range, Inches
Range,
AWG
Thickness
Width
.090 - .114
.090 - .114
.090 - .320
.090 - .320
Pkg.
Qty.
100
100
Conductors
B
Crimped Height
D
Washers
Catalog
Number
FPW14
FPW516
FPW38
FPW12
FPW58
Recommended
Installing
Torque In-Lbs.
Pkg.
Qty.
.68
1.00
1.00
1.25
1.40
50 - 80
125 - 160
160 - 240
390 - 540
540 - 730
250
250
250
250
250
Dimensions, Inches
Bolt Size,
Inches
1/4
5/16
3/8
1/2
5/8
.27
.34
.43
.56
.68
NOTE: Wire sizes and combinations shown have been tested to and meet or exceed Thomas & Betts specifications. Connectors may be suitable for
other wire sizes or combinations. Thomas & Betts sells these connectors with the understanding that the user will perform necessary tests to
determine their suitability for the intended purpose.
Dragon Tooth
O8
2002 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412031.O01 DT 3/5
3/17/03
8:14 AM
Page 9
MM
Circular
Mils
Wire
Size
AWG
Inches
Inches
MM
Circular
Mils
4/0
3/0
2/0
1/0
.4600
.4096
.3648
.3249
11.68
11.40
9.266
8.52
211600
167800
133100
105600
11
12
13
14
.0907
.0808
.0720
.0641
2.30
2.05
1.83
1.63
8230
6530
5180
4110
1
2
3
4
.2893
.2576
.2294
.2043
7.348
6.543
5.827
5.189
83690
66360
52620
41740
15
16
17
18
.0571
.0508
.0453
.0403
1.45
1.29
1.15
1.02
3260
2580
2050
1620
5
6
7
8
.1819
.1620
.1443
.1285
4.620
4.115
3.665
3.264
33090
26240
20820
16510
19
20
21
22
.0359
.032
.0285
.0253
0.912
.813
.724
.643
1290
1020
812
640
9
10
.1144
.1019
2.906
2.588
13090
10380
23
24
.0226
.0201
.574
.511
511
404
Wire
Size
AWG
Inches
MM
Circular
Mils
Nom. Diameter
Nom. Diameter
Decimal Equivalents
Wire
Size
AWG
Inches
MM
Circular
Mils
1/64
1/32
3/64
.0156
.0312
.0469
3/16
13/64
7/32
.1875
.2031
.2188
11/32
23/64
3/8
.3438
.3594
.375
33/64
17/32
35/64
.5156
.5312
.5469
1/16
5/64
3/32
.0625
.0784
.0938
15/64
1/4
.2344
.25
25/64
13/32
27/64
.3906
.4062
.4219
9/16
37/64
19/32
.5625
.5781
.5938
7/64
1/8
9/64
.1094
.125
.1406
17/64
9/32
19/64
.2656
.2812
.2969
7/16
29/64
15.32
.4375
.4531
.4688
39/64
5/8
41/64
.6094
.625
.6406
5/32
11/64
.1562
.1719
5/16
211/64
.3125
.3281
31/64
1/2
.4844
.5
21/32
43/64
.6562
.6719
Nom. Diameter
Nom. Diameter
Stud Size
#6
#8
#10
1/4"
5/16"
3/8"
1/2"
Hole Dia.
.143
.169
.196
.260
.323
.386
.516
2002 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
Dragon Tooth
O9
412031.O01 DT 3/5
3/17/03
8:14 AM
Page 10
ERG1806
Features:
Incorporates the ergonomically designed
Comfort Crimp tool handles which
distribute the force more evenly across the
hand.
Shure-Stake mechanism ensures a
complete crimp cycle before the tool
releases.
Rubberized thermoplastic handles combine
maximum friction with a soft, comfortable
feel that reduces muscle tension.
Two-piece movable die nest provides easy
connector removal.
Description
ERG1801
ERG1802
ERG1804
ERG1806
Tool
Gauging
Connector
.069 max.
.076 max.
.034 max.
.095 max.
Contact Customer Services for availability and most recent additions to the ergonomic tool series.
\
Cat. No.
Description
ERG811
Ergonomic Comfort Crimp Hand operated crimp tool with single die
for installing T&B insulation piercing connectors on magnet wire.
Hand operated crimping tool with single die for installing T&B insulation
piercing connectors on magnet wire.
WT811
ERG811
Specifications:
Weight: 1 Lb.
Material: High Strength Steel
Connector
214420
214420
Maintenance:
1. Occasional light oiling.
Dragon Tooth
WT811
Features:
Incorporates a Shure-Stake mechanism
which will not allow the dies to open until
preset crimping is reached.
Single die nest for 214420 connector only.
O10
2002 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412031.O01 DT 3/5
3/17/03
8:14 AM
Page 11
Standard Components
Description
ERG-3001*
ERG-3002*
ERG-3003
ERG-3004
ERG-3005
ERG-3006
ERG-3007
ERG-3008
ERG-3000
Base Unit
Hose & Tool Head Assembly
NiCd Battery
15 min. Battery Charge
Carrying Case
AC Adapter
Benchmount
Foot Switch
Complete Kit (see note below)
Wt. (lb.)
11.0
3.5
1.3
3.0
6.3
7.0
1.0
2.5
26.4
Die Gauging
Battery
Type
NiCd 12 V, rechargeable
Recharging time
15 min.
Number of recharges 1000
2002 Thomas & Betts Corporation. Specifications are subject to change without notice.
Cat. No.
Cat. No.
Connector
ERG202
ERG206
22XXX2 Series
22XXX6 Series
Max.
Min.
.072
.090
.068
.086
ERG3000 also accepts dies for T&B Sta-Kon 22-8AWG, insulated and non-insulated terminals. Please
contact your sales representative for a complete catalog of quality Sta-Kon termination products.
*Check with customer service for availability of dies.
www.tnb.com
O
Dragon Tooth
O11
412031.O01 DT 3/5
3/17/03
8:14 AM
Page 12
11903A
Description
Open C yoke; hand actuated
Open C yoke; foot actuated
Airhose, 8' long with fittings
Foot valve for 11904A
Cat. No. 11904A also requires two (2) Cat. No. 11913 air hoses and one (1) Cat. No. 11930 foot valve.
Overall length 10-7/8"
Diameter 2-1/4"
Operating Pressure 90-100 PSI
Weight 3 lbs.
13500
Std.
Pkg.
Description
Heavy duty, high speed production tool installs a wide range of Dragon Tooth connectors.
Equipped with Shure-Stake mechanism ensuring full crimp cycle before release.
All metallic construction. Supplied with foot pedal, air hose-air/lubricator.
Height 12"
Base 8" Square
Weight 17 Lbs.
Operating Pressure 85-90 PSI.
Includes hoses, foot pedal and air treatment system.
Connector
13201
13202
13206
22XXX1 Series
22XXX2 Series
22XXX6 Series
Max.
Min.
.066
.072
.090
.062
.068
.086
11903A, 11904A, and 13500 also accepts dies for T&B Sta-Kon 22-10AWG, insulated and noninsulated terminals. Please contact your sales representative for a complete catalog of quality Sta-Kon
termination products.
O
Dragon Tooth
Features:
Operates on 85 min. PSI air supply.
Foot pedal contains T&B Shure-Stake control
mechanism which ensures a full compression
each time.
Insulation piercing connectors are fed on a
continuous reel mounted strip.
Dies are self-contained. Includes foot valve,
hoses and air treatment system.
O12
Tool
Cat. No.
13676A
13678
13679
13696
Tool Size
Connector
Cat. No.
Quantity
Per Reel
Tool
Weight
WD
DP
Ht
220004
220001
220002
220006
9000
3000
3000
2500
19 lbs.
28 lbs.
28 lbs.
32 lbs.
5"
6"
6"
6"
14"
18"
18"
18"
11"
14"
14"
16"
2002 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412031.O01 DT 3/5
3/17/03
8:14 AM
Page 13
Description
Remote 14 ton hydraulic head. Dies ordered separately.
13100A
Output
Hydraulic Operating Pressure
Length (with coupling)
Width
Height
Piston Dia.
Piston Stroke
Weight (without dies)
14 tons (nominal)
10,000 psi (max.)
1112 in.
212 in.
414 in.
1.812 in.
1.5 in. max.
10 lbs.
Retainer Pin
See die chart on page FO15 for complete listing of dies and connectors used with 13100A.
Description
Std.
Pkg.
13400
Output
Hydraulic Operating Pressure
Length (with coupling)
Width
Weight (without dies)
12 tons (nominal)
10,000 psi (max.)
1412 in.
314 in.
15 lbs.
FORGED
STEEL
13400
See die chart on page O15 for complete listing of dies and connectors used with 13400.
Description
15 ton hydraulic tool; carrying case included.
TBM15
15 tons nominal
10,000 psi nominal
2 in. dia.
1512 lbs. (without dies)
8 AWG - 1000 MCM Copper
10 AWG - 1000 MCM Aluminum
15500-TB
Adapter
13713
See die chart on page O15 for complete listing of dies and connectors used with TBM15.
2002 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
O13
Dragon Tooth
Features:
New longer, slimmer profile allows easier
access into tight spaces.
Wider jaw opening eases crimping of larger
connectors.
Available with an insulated head and runs off
of existing 10,000 PSI hydraulic pumps.
Includes steel carrying case. Tool weight is
14 pounds.
Output Force:
Operating Pressure:
Cylinder:
Tool Weight:
Installs
412031.O01 DT 3/5
3/17/03
8:15 AM
Page 14
Lightweight design
Weighs less than 7 lbs. including dies.
Includes steel carrying case.
Description
The TBM6H Remote Hydraulic Crimping Head is a lightweight but powerful compression tool. The TBM6H
operates from any 10,000 psi hydraulic pump.
Output Force
Operating Pressure:
Tool weight:
Tool dimensions:
Tool carrying case included
Dies are ordered as a set (2 pieces)
Upper & lower dies are identical
6 tons nominal
10,000 PSI Nominal (Safety By-Pass on pump set at 9800 PSI)
6-1/2 lbs. (without dies)
13-1/2 in. long, 3-1/2 in. wide
See die chart on page O15 for complete listing of dies and connectors used with TBM6H.
13611
13612
13613
13614
13619
13600
13810
13620
13589A
13619
13618
Description
Electric hydraulic pump, 10000 psi with Shure-Stake mechanism feature;
this is a heavy duty OEM pump with high flow rate; 115V, 60Hz, 112 HP,
23 Amps; requires hand or foot control.
Hand Switch for 13810
Foot Switch for 13810
High Pressure, steel reinforced hydraulic hose; 6 ft.
High Pressure, steel reinforced hydraulic hose; 10 ft.
High Pressure, plastic hydraulic hose; 10 ft.
This electric hydraulic pump is for use with all T&B hydraulic heads
consists of pump with pressure gage and Pioneer type male coupler;
add suffix WG to eliminate gauge; output pressure 9800 PSI; order
switch and hose separately.
Hand Switch10 ft
Foot Switch10 ft
10 ft. Non Metallic Hose
20 ft. Non Metallic Hose
A remote control switch is required. Order Cat. No. 13620 for hand operation or Cat. No. 13589A for foot operation.
All pumps are supplied with a metal carrying case.
13610A
13611
13612
13797
Dragon Tooth
A remote control switch is required to operate this unit. Use either a #13611 (hand) or #13612 (foot) switch.
13610A
O14
2002 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
412031.O01 DT 3/5
3/17/03
8:15 AM
Page 15
ERG-3000
11903A
11904-A
13500
Strip
Connector
13100A
13400
TBM15
ERG811/WT811
ERG1801
ERG1806
ERG1801
ERG1806
ERG1801
ERG1806
ERG1801
ERG1802
ERG1804
ERG1806
ERG1801
ERG1806
ERG1801
ERG1806
ERG1801
ERG1806
ERG1806
ERG206
ERG206
ERG206
ERG202
ERG206
ERG206
ERG206
ERG206
ERG206
13671B
13673B
13671B
13673B
13671B
13671B
13673B
13671B
13671B
13671B
13689B
13689B
13681B
13670B
13670B
13670B
13670B
13682
13671A
13673
13671A
13673
13671A
13671A
13673
13671A
13671
13671A
13681
13670A
13670A
13670A
13670A
13670B
13670A
13670B
13670A
11956
13201
13206
13201
13206
13201
13206
13201
13202
13206
13201
13206
13201
13206
13201
13206
13206
13678
13679
13676A
13690
13696
6TON-MW-08
6TON-MW-09
13713
13713
13713
13713
13713
13713
13713
13713
13713
13713
13713
13713
13683B
13684B
13686B
13685B
13685B
13685B
13683
13684
13686
13685
13685
13685
13713
13713
13713
13713
13713
13713
13713
13713
13713
13713
13713
13713
Note: Dies that fit 13100A also work in TBM15 with use of adapter 15500TB.
2002 Thomas & Betts Corporation. Specifications are subject to change without notice.
www.tnb.com
O15
O
Dragon Tooth
204210MT
204210S
204210SH
204210-1
204210-1H
204210-2
204210-3
204210-3H
204210-5
204212
204217
204MT14
204MT38
204T14
204T38
210214MT
210214S
210214-2
210214-3
210216
210216F
210217
210217F
210219
210219F
210MT14
210MT38
214420
220001
220002-TB
220004
220005
220006
220015
220016
220017
220018
220019
220020
220021
220022
220023
220024
220025
220026
22F061
22F066
22F081
22F086
22F101
22F106
22L001
22L002
22L004
22L006
22L008
22L009
22L009H
22LF01
22LF06
22LM01
22LM06
22R061
22R106
22R146
314118S
314123
314125
TBM6H
Dies