Beruflich Dokumente
Kultur Dokumente
STYLISTIC Slate PC
Getting Started Guide
Warranty
Removable Battery
AC Adapter
o
o
o
o
o
AC Cable
Pen Kit
Pen-tether
Cleaning Cloth
Associated Optical Media
Controls, Connectors,
and Access Points
Display
Front Web Camera
Power/Suspend/Resume Switch
BACK PANEL
Built-in Microphone
USB 2.0 Port
SmartCard Slot
Line Out/Headphone Jack
HDMI Port
Removable Battery
Built-in Microphone
Initial Start Up
Push one end of the tether under the slot on the top of the pen,
and then thread the opposite end of the tether through the loop.
Insert the other end of the pen tether through the attachment
point on the STYLISTIC Slate PC, and feed the pen through
the large loop in the tether.
THE LITHIUM POLYMER BATTERY IS NOT CHARGED UPON
PURCHASE. YOU WILL NEED TO CONNECT THE AC ADAPTER
TO CHARGE YOUR BATTERY OR USE YOUR STYLISTIC SLATE PC.
IT WILL TAKE APPROXIMATELY 5 HOURS TO INITIALLY CHARGE
THE BATTERY.
There is an indicator on the battery. The indicator color means:
Green: 50% - 100% charge
Orange: 49% - 10% charge
Red: under 10% charge
2. Connect AC Power
Be sure that you have the battery installed.
Plug the AC cord into the AC Adapter.
Plug the DC output cable into the DC power jack of your Slate PC.
Plug the AC adapter into an AC electrical outlet.
AC Adaptor
3. Turn on Power
DC Power Jack
Slide the Wireless Device Switch to On. This will allow you to
configure WLAN and Bluetooth. Check to be sure your slate is
NOT connected to the network or the Internet.
Ensure that the AC adapter is connected and supplying power to
your slate before activating Click Me! It will take 25 to 30 minutes
for Click Me! to install and configure your drivers and utilities.
(For
In addition to an icon on the desktop, a dialog box
Additional
Applications
will automatically open that prompts you to run
and Utilities)
Click Me!. If you choose not to run Click Me! at
this time, the Click Me! icon will appear on your
desktop. When you click the Click Me! icon, your
system will automatically build the icon tray in the Click Me!
bottom right of the screen. These icons provide
links to utilities that you will frequently access.
7. Users Guide
Your electronic Users Guide contains important detailed information about your new computer.
You can access your Users Guide by selecting its icon from the screen desktop.
The Users Guide will be copied to your hard drive in the C:\Fujitsu\Manual directory.
Shortcuts to the Users Guide will be placed on your desktop and in the Start menu.
THERE WILL BE OTHER APPLICATIONS THAT DO NOT GET
INSTALLED USING THE CLICK ME! UTILITY. THEY CAN BE
FOUND IN AN APPS. FOLDER ON YOUR DESKTOP.
Using the stylus or your finger (depending upon which type of input you are calibrating),
touch the screen directly on the (+) symbol. Lift your stylus/finger from the screen
and the target will move to a different location on the screen.
Repeat until you have selected all of the (+) symbols.
Once you have selected all the symbols, press the [Yes] button.
Touch your stylus/finger to various points on the screen to verify that the screen
is correctly calibrated. If you are not satisfied with the screens calibration,
press the [Calibrate]) button to begin again.
Application Buttons
The three Slate PC buttons are
located on the right-hand side of a
horizontally-oriented system. Two
of the buttons have secondary
functions. The secondary functions
are activated by pressing and
holding the button.
Ctl-Alt-Del is the only application
button that can be used while
the system is logging on or when
the system is locked (i.e., when
you have the logon or computer
locked windows showing on
your desktop).
Power Management
Your Fujitsu STYLISTIC Slate PC
has many options and features for
conserving battery power. Some
of these features are automatic
and need no user intervention.
However, others depend on the
parameters you set to best suit
your operating conditions, such
as those for the display brightness.
Internal power management for
your Slate PC may be controlled
from settings made in your operating
system, pre-bundled power
management application, or from
settings made in BIOS setup utility.
See your Users Guide to take full
advantage of these features.
As with all mobile, battery powered
computers, there is a trade-off
between performance and
power savings.
Drivers
To check for the latest drivers go
to us.fujitsu.com/computers.
Once FujitsuHL is launched you can access the Camera Tool by tapping the
icon in the lower
left corner of your display. The Camera tool allows you to take and view pictures and modify the
settings of the Web Camera(s).
Indicators
Status Display Icons
Shows status of system power and battery.
Mode/State
LED State
Icon
On State
Remarks
Idle Mode
Sleep
Blue, blinking
Power
Off State
Off The system has suspended and saved settings and data to
the hard disk drive.
Hibernate
On State
Orange
Idle Mode
Green AC adapter and battery are available and battery has
50% - 100% charge.
Charge/DC In
Sleep
Off State
Off
Application Buttons
Allow you to quickly launch pre-defined applications and utilities, rotate your screen, and perform Ctl-Alt-Del by pressing a button.
Button Icon
and
Name
Primary
Function
(Press)
Secondary
Function
(Press and Hold)
Press at
Splash
Screen*
In BIOS
Setup
Utility
Description
Keyboard
Launch
Launch
Boot
Enter
Button
Slate PC
FujitsuHL
Menu
SoftKeyboard
Input Panel
Rotate
Screen Rotate Enable/ Disable
BIOS Setup
Down
Button
Auto Rotate
Utility
* Press at Splash Screen refers to the action that occurs when you press the button when the Fujitsu logo appears
when you first start up the system.
Application Buttons
Notes:
When using your Slate PC, basic safety precautions should always be followed to reduce the risk of fire, electric shock and
injury to persons, including the following:
Do not use this product near water for example, near a bathtub, washbowl, kitchen sink or laundry tub,
in a wet basement or near a swimming pool.
Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire.
They may explode. Check with local codes for possible special disposal instructions.
CAUTION: HOT SURFACE: The bottom of this computer can become hot when used for long periods
of time. When using this device, take caution to limit long term or continuous use while resting it on
exposed skin, such as the lap.
FOR CONTINUED PROTECTION AGAINST RISK OF FIRE, REPLACE ONLY WITH THE SAME TYPE
AND RATING FUSE.
CAUTION
Fujitsu is very concerned with environmental protection, and has enlisted the services of the Rechargeable Battery
Recycling Corporation (RBRC)**, a non-profit public service organization dedicated to protecting our environment
by recycling old batteries at no cost to you. RBRC has drop-off points at tens of thousands of locations throughout
the United States and Canada. To find the location nearest you, go to www.RBRC.org or call 1-800-822-8837.
If there are no convenient RBRC locations near you, you can also go to the EIA Consumer Education Initiative
website (http://EIAE.org/) and search for a convenient disposal location. Remember protecting the
environment is a cooperative effort, and you should make every effort to protect it for current and future
generations.
* To order a new battery for your Fujitsu mobile computer, go to the Fujitsu shopping site
at www.shopfujitsu.com in the US or www.fujitsu.ca/products/notebooks in Canada.
** RBRC is an independent third party to which Fujitsu provides funding for battery recycling; RBRC is in
no way affiliated with Fujitsu.
Popular Accessories
Carrying Cases
Bump Case
Folio Case
Intermediary VESA Mount Plate
Hand Strap
Power Options
AC Adapter with US Cord
Additional Battery
Auto Airline Adapter
Battery Charger
Docking Options
Additional Accessories
Wireless Bluetooth Keyboard
Screen Protectors
Stylus Tether
Extra Stylus
External USB Optical Drive
USB to Ethernet Adapter Cable
Contenu de la bote
Assurez-vous que les articles suivants sont bien inclus
dans la bote:
o Cble secteur
o Kit stylo
o PC Ardoise STYLISTIC
o Cordon du stylo
o Guide dintroduction
o Lingette de nettoyage
o Garantie
o Lecteur optique associ
o Batterie amovible
o Adaptateur secteur
Commandes,
connecteurs et
points daccs
cran
Camra Web avant
Point dattache du
cordon du stylet
Interrupteur de dispositif sans fil
Boutons dapplication
Connecteur pour duplicateur de ports
Voyants dtat
Haut-parleur
Connecteur entre c. c.
Interrupteur dalimentation/veille/reprise
ARRIRE
Microphone intgr
Port USB 2,0
Fente pour carte SmartCard
Prise de sortie audio/couteurs
Port HDMI
Batterie amovible
10
Microphone intgr
Dmarrage initial
Installation du cordon
Adaptateur
secteur
3. Allumez lordinateur
Interrupteur de
dispositif sans fil
Interrupteur dalimentation/
veille/reprise
future. Lorsque vous cliquez sur licne Click Me!, votre systme configure automatiquement la barre
dicnes dans le coin infrieur droit de lcran. Ces icnes offrent des liaisons avec des utilitaires
susceptibles dtre utiliss frquemment.
7. Guide dutilisation
Votre guide dutilisation lectronique contient des informations importantes propos de votre nouvel
ordinateur. Pour y accder, slectionnez licne Guide dutilisation sur le bureau (lcran).
Le guide dutilisation sera alors copi sur votre disque dur, dans le rpertoire C:\Fujitsu\Manual
directory. Vous pourrez ensuite crer des raccourcis sur votre bureau et dans le menu Dmarrer pour
accder directement au guide dutilisation.
DAUTRES APPLICATIONS NE SONT PAS INSTALLEES AVEC
LUTILITAIRE CLICK ME ! VOUS POUVEZ Y ACCEDER
DANS LE DOSSIER APPS DU BUREAU WINDOWS.
8. talonnage de lcran
Pour assurer une correspondance prcise entre le curseur et le stylet, excutez lUtilitaire dtalonnage
de lcran tactile avant dutiliser lcran tactile pour la premire fois. Faites de mme si vous avez
modifi la rsolution de lcran et/ou lorientation. Pour excuter lutilitaire dtalonnage :
Allez Dmarrer -> Panneau de configuration.
Double-cliquez sur licne Paramtres PC Ardoise , puis slectionnez longlet Ecran.
Cliquez sur le bouton [Etalonner], puis slectionnez la fonction talonner : stylet ou tactile.
Rglez lcran de votre PC ardoise un angle confortable, puis reprez le symbole (+) dans le
coin suprieur gauche de lcran.
LORSQUE VOUS TAPOTEZ SUR LCRAN PENDANT
LTALONNAGE, NUTILISEZ PAS DE FORCE EXCESSIVE.
SI VOUS UTILISEZ UNE FORCE EXCESSIVE, VOUS RISQUEZ
DENDOMMAGER LCRAN DEL ET/OU LCRAN TACTILE.
A laide du stylet ou de votre doigt (selon la fonction que vous avez choisi dtalonner), touchez
fermement lcran directement sur le symbole (+). Soulevez le stylet de lcran et la cible se
dplacera vers une position diffrente sur lcran.
Rptez ltape 4 jusqu ce que vous ayez slectionn tous les symboles (+).
Une fois cette opration termine, appuyez sur le bouton [OK].
Touchez lcran avec le stylet en plusieurs endroits pour vrifier quil est bien talonn. Si vous ntes
pas satisfait de ltalonnage de lcran, appuyez sur le bouton [talonner] pour recommencer.
Boutons
dapplication
Les trois boutons du PC ardoise
sont situs sur le ct droit de
lordinateur lorsque celui-ci est
lhorizontale. Deux de ces boutons
ont une fonction secondaire. Pour
activer les fonctions secondaires,
appuyez sur le bouton correspondant et maintenez-le enfonc.
Le bouton Ctrl-Alt-Suppr est le
seul pouvoir tre utilis lorsquune
session dexploitation est en cours
de lancement ou lorsque lordinateur est bloqu (cest--dire lorsque
la fentre Ouverture de session
ou Ordinateur bloqu apparat
sur le bureau).
Gestion de lalimentation
Votre PC Ardoise Fujitsu STYLISTIC
possde plusieurs dispositifs permettant dconomiser lnergie des
batteries. Certains dentre eux sont
automatiques et ne ncessitent
donc aucune intervention. Cependant, dautres dpendent
de paramtres que vous pouvez
configurer en fonction de vos
conditions dutilisation, notamment
en ce qui concerne la luminosit de
lcran. Les paramtres de gestion
interne de lalimentation de votre
PC ardoise peuvent tre configurs
dans votre systme dexploitation,
dans une application intgre de
gestion de lalimentation ou dans
lutilitaire de configuration du BIOS.
Pour profiter pleinement de ces
fonctionnalits, consultez le guide
dutilisation.
linstar de tous les ordinateurs
portables aliments par batterie,
vous devez trouver le meilleur
compromis entre performance
et rendement nergtique.
Le PC Ardoise Q550 est dot dune camra Web lavant et larrire. Cela vous permet de prendre
des photos de vous-mme ou dobjets situs en face de vous, et de les envoyer sur Internet.
Pour utiliser cette(ces) camra(s), lancez dabord Fujitsu HL (Home Launcher). Deux options soffrent
vous :
Appuyez sur le bouton [Clavier] sur le PC pendant au moins deux secondes, ou
Allez [Dmarrer] > Tous les programmes > FujitsuHL, puis slectionnez FujitsuHL.
POUR UTILISER FUJITSUHL, REGLEZ LA RESOLUTION DE
LECRAN A 1280 X 800 DOTS.
12
Pilotes
Pour vrifier les pilotes les
plus rcents, visitez
us.fujitsu.com/computers.
Une fois que FujitsuHL est lanc, vous pouvez accder loutil Camra en tapotant sur licne
dans le coin infrieur gauche de lcran. Loutil Camra vous permet de prendre des photos et den
regarder, et de modifier les paramtres de la (des) camra(s) Web.
Bouton de la
visionneuse
de photos
Bouton de la camra
Bouton
Bouton de paramtrage
obturateur
Bouton Accueil
Zone daperu : Cette zone prsente laperu de la scne en cours de capture par la camra Web.
Bouton Accueil : En tapotant sur ce bouton, vous pouvez revenir au tout dernier cran utilis de
Launcher.
Bouton de la visionneuse de photos : En tapotant sur ce bouton, vous lancez la visionneuse qui vous
permet de regarder les photos. Si certaines photos ont dj t enregistres, ce bouton sera modifi et
associ la dernire photo.
Bouton de lobturateur : Tapotez sur ce bouton pour prendre une photo. Les photos seront enregistres
dans le dossier Camra, sous Photos (Pictures). Le nom de fichier contient la date laquelle la photo a
t prise.
Bouton de la camra : Tapotez sur ce bouton pour passer de la camra Web arrire la camra Web
avant, et vice versa.
Bouton de paramtrage : Tapotez sur ce bouton pour modifier les paramtres de luminosit, de
contraste et de nuance de couleur.
Noubliez pas de consulter les instructions compltes du guide dutilisation pour savoir
comment utiliser FujitsuHL et la (les) camra(s) Web.
13
Voyants
Icnes de la zone dtat
Affiche ltat de lalimentation et de la batterie.
Icne
Alimentation
Mode/tat
tat du voyant
Remarques
Bleu continu
Sommeil
Bleu clignotant
Le systme est en mode Veille, les paramtres actifs sont enregistrs dans
la mmoire vive.
teint
Sous tension
Orange
Mode dinactivit
Vert
Veille prolonge
Niveau de charge/
entre c.c.
Sommeil
Hors tension
Boutons dapplication
Ces boutons vous permettent de lancer rapidement des applications et utilitaires prdfinis, de tourner lcran et dinvoquer la
fonction Ctrl-Alt-Suppr en appuyant sur un bouton.
Icne et nom
des boutons
Fonction
principale
(Appuyer)
Appuyer et
maintenir
enfonc
Pression
lcran de
dmarrage
initial
Utilitaire de
configuration du BIOS
Description
Bouton du
Clavier logiciel
Lancement
du tableau
dentre PC
ardoise
Lancement
de FujitsuHL
Menu de la
procdure
damorage
Entre
Bouton de
rotation
Rotation de
lcran
Activation/
dsactivation de
la rotation
automatique
Utilitaire
de configuration du
BIOS
Bas
Bouton
Ctrl-Alt-Suppr
Ctrl + Alt +
Suppr
Aucune
Menu des
applications
Haut
* Laction Press at Splash Screen dsigne laction qui se produit quand vous appuyez sur le bouton lorsque le logo
Fujitsu apparat au premier dmarrage de lordinateur.
14
Icnes de la
zone dtat
Boutons
dapplication
ATTENTION
ATTENTION
Recyclage de la batterie
Avec le temps, lautonomie des batteries qui alimentent votre ordinateur portable finira par diminuer ; cest un phnomne
naturel pour toutes les batteries. Lorsque vous remarquerez cela, songez installer une batterie neuve*. Si vous remplacez
votre ancienne batterie, il est important que vous la jetiez comme il convient car, dans le cas contraire, les matriaux quelle
contient risquent de nuire lenvironnement.
Chez Fujitsu, nous portons une attention particulire la protection de lenvironnement et nous collaborons
donc avec la Rechargeable Battery Recycle Corporation (RBRC*), une organisation de service publique but
non lucratif qui sengage dans la protection de lenvironnement par le recyclage des batteries usages sans cot
pour vous. La RBRC dispose de dizaines de milliers de points de collecte aux tats-Unis et au Canada. Pour
trouver le lieu de collecte le plus proche de chez vous, visitez www.RBRC.org ou appelez au 1-800-822-8837.
Sil ny a aucun site RBRC facilement accessible prs de chez vous, vous pouvez galement aller sur le site
Web de sensibilisation des consommateurs de lEIA (http://EIAE.org/) et y rechercher un site vous convenant.
Rappelez-vous que la protection de lenvironnement est laffaire de tous, vous devriez donc faire tout votre
possible afin dy contribuer, pour la gnration actuelle et les gnrations suivantes.
* Pour commander une nouvelle batterie compatible avec votre ordinateur portable Fujitsu, visitez le site
www.shopfujitsu.com si vous rsidez aux tats-Unis ou www.fujitsu.ca/products/notebooks si vous rsidez
au Canada.
** La RBRC est une organisation indpendante dont Fujitsu finance une partie des activits de recyclage;
la RBRC nest en aucune faon affilie Fujitsu.
15
Options dalimentation
Adaptateur secteur avec cordon
dalimentation type Etats-Unis
Batterie supplmentaire
Adaptateur auto/avion
Chargeur de la pile
Options darrimage
Station darrimage avec adaptateur secteur
Accessoires supplmentaires
Clavier Bluetooth sans fil
Protecteurs dcran
Cordon de stylet
Stylet supplmentaire
Lecteur de disquette USB externe
Cble adaptateur USB > Ethernet
16