Beruflich Dokumente
Kultur Dokumente
~r.
It
ch
{.
AASHTO M 17-11 is identical to ASTM D 242/D 242M-09 except for the following provisions:
1. All references to the ASTM standards contained in ASTM D 242/D 242M-09, listed in the
following table, shall be replaced with the corresponding AASHTO standard:
ial
Referenced Standards
AASHTO
ASTM
c 183
T 127
D 546
T 37
D 4318
T90
TS-2c
2.
Add a new Section 4.3 after Section 4.2 that contains the following:
3.
"Fly ash used as a mineral filler shall have a maximum loss on ignition of 12 percent."
Add a new Section 5.5 after Section 5.4 that contains the following:
"Determine the loss on ignition of fly ash according to ASTM C 311."
M 17-1
AASHTO