Beruflich Dokumente
Kultur Dokumente
Copyright 2014
InfoVista S.A. All rights reserved.
Notice
This document contains confidential and proprietary information of InfoVista S.A. and may
not be copied, transmitted, stored in a retrieval system, or reproduced in any format or
media, in whole or in part, without the prior written consent of InfoVista S.A. Information
contained in this document supersedes that found in any previous manuals, guides,
specifications data sheets, or other information that may have been provided or made
available to the user. This document is provided for informational purposes only, and
InfoVista S.A. does not warrant or guarantee the accuracy, adequacy, quality, validity,
completeness or suitability for any purpose the information contained in this document.
InfoVista S.A. may update, improve, and enhance this document and the products to which
it relates at any time without prior notice to the user. INFOVISTA S.A. MAKES NO
WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, THOSE OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, WITH RESPECT TO THIS
DOCUMENT OR THE INFORMATION CONTAINED HEREIN.
Trademark Acknowledgement
Mentum, Mentum Planet, Mentum Ellipse, Mentum Fusion, Mentum CellPlanner, and
Mentum LinkPlanner are registered trademarks owned by InfoVista S.A. MapInfo
Professional and the Spectrum Suite are registered trademarks of Pitney Bowes Software
Inc. Map data copyright OpenStreetMap contributors, CC BY- SA. iBwave Design is a
trademark owned by iBwave. This document may contain other trademarks, trade names,
or service marks of other organizations, each of which is the property of its respective
owner.
Project Explorerprovides quick and easy access to Mentum Planet functionality from
a central location. By default, it is docked to the left but you can customize the location
of the Project Explorer to suit your needs.
Mentum Planet menusprovide an alternate way of accessing Mentum Planet
functionality.
Toolbarsprovide an alternate way of accessing Mentum Planet functionality.
Commonly used toolbars include the Main toolbar, the Site toolbar, the Analysis
toolbar, and the Network toolbar.
A Mentum Planet project contains all of the information pertaining to a particular wireless
network. It consists of a collection of files and folders. Each project has a project (.planet)
file that defines the project structure and references the associated data (planet.dat) file. To
begin the walkthrough, you must first download the dataset.
Note: In order to complete the walthrough, you require a valid license for the
technology you are using. A walkthrough is available for LTE, WiMAX, and WCDMA. If you
do not have the appropriate license, contact Customer Support to obtain a temporary
license.
Procedure
To download and unzip the pre-configured project
1. Use your Product ID to log in to the Customer Support section of the web site at
http://www.infovista.com/services/customer-support/wireless-products.
2. From the left-hand menu, choose Product Downloads.
3. In the Password box next to the version of Mentum Planet you use, type the
password supplied by Customer Support, and click Submit.
4. Scroll down to the dataset section of the download page, right-click the file in the
Single column and save the compressed file to a location on your computer.
5. Unzip or extract the files.
A folder is created containing all project files.
6. Double-click the Mentum Planet (.planet) project file to open the project in Mentum
Planet.
The project opens in the Map window.
Procedure
To associate a workspace with the project
1. With theLTE FDD project open in Mentum Planet, do one of the following:
n
2. On the General tab, in the Workspace section, click Browse, navigate to the
ProjectOpening.wor file saved in theproject folder, and click Open.
The Workspace label is now blue to indicate that a change has been made but not
applied to the project.
3. Enable the Workspace Autosave check box.
Using the workspace autosave feature ensures that the next time the project is
opened, it will look exactly as it did when it was last closed.
4. Click the Coordinate System tab.
This is where you can change the coordinate system used for site data.
5. To define a custom attribute that will enable you to specify the street address for
each site, do the following:
n
In the tree view, choose Site and click the Text tab.
Click Add.
6. Click OK.
7. Choose File >Close Project to close the project or press CTRL+F3.
8. In the Planet confirmation dialog box, click Yes.
9. When prompted to save your changes, click Yes.
Procedures
To customize your workspace
1. To open the project, in Mentum Planet, choose File >Recent Projects >LTE FDD.
The entire project path is displayed in the information bar at the bottom of the Mentum
Planet window.
2. On the Main toolbar, click the Layer Control
button.
button.
5. In the Layer Properties dialog box, in the Display Mode section, enable the Style
Override check box.
6. Click the style override
button.
7. In the Adjust Image Styles dialog box, in the Conversions section, choose Grayscale
and click OK.
8. In the Layer Properties dialog box, click OK.
9. In the Layer Control window, select the Toronto30m_clutter_trim file and click the
Layer Properties button.
10. In the Enhanced Rendering section, type a translucency value of 60%, and click OK.
11. In the Layer Control window, select the clutter file and drag it above the heights file.
The clutter file displays on top of the heights file.
12. Close the Layer Control window.
13. In the Project Explorer, from the Category list, choose Project Data.
14. Expand the Geodata folder and then expand the Custom folder.
15. Right-click the toronto_highway.tab file and choose View.
16. On the Main toolbar, click the Zoom In
17. To remove the vector file, right-click the toronto_highway.tab file and choose View
again.
The checkmark next to the View command is no longer displayed to indicate that the
highways are no longer shown in the Map window.
If you want to proceed to the next walkthrough, leave the Map window open.
If you want to stop here, choose File >Close Project, click Yes to confirm you
want to close the project and Yes to confirm you want to save the project.
Basicthe tool generates hexagons based on the criteria you define and places a site
at the center of each hexagon using either the default site configuration or the site
template you specify. If you are using a clutter file, you can exclude clutter classes
such that no sites will be placed within them.
Advanced the tool generates complex shapes based on the planning strategy you
choose and the criteria you define (including clutter-specific criteria) and places a site
at the center of the shape using the site template you specify. Each site is given a level
of priority that determines whether it becomes a possible site candidate. In Advanced
mode, you can use a traffic map in order to generate more accurate shapes. In
addition, you can use existing and candidate sites in the site placement process.
In this walkthrough, you will use the Advanced ASPT option to place sites automatically.
Note: Before beginning the walkthrough, download the dataset. See "Mentum Planet
Walkthrough topics" on page 3 It is best to complete walkthrough topics in the order they
are presented.
Note: To use the Advanced ASPT option requires a license. Contact Customer Support
for a temporary license.
Procedures
To place sites using the Basic option
1. Open the LTE FDD project if it is not already open.
2. Choose Optimization >Automatic Site Placement.
3. In the Automatic Site Placement dialog box, on the General tab, do the following:
n
In the Region section, choose the Area option and ensure TO_Core is selected.
3. Click Generate.
Eleven new sites are proposed.
If you want to proceed to the next walkthrough, leave the Map window open.
If you want to stop here, choose File >Close Project, click Yes to confirm you
want to close the project and Yes to confirm you want to save the project.
In the Region section, choose the Area option and ensure TO_Core is selected.
10
If you want to proceed to the next lesson, leave the Map window open.
If you want to stop here, choose File >Close Project, click Yes to confirm you
want to close the project and Yes to confirm you want to save the project.
Procedure
1. In the Project Explorer, in the Sites category, expand the Groups node, and expand the
Local node.
2. Right-click the Core group and open the Tabular Editor.
3. In the Tabular Editor, click the Sectors tab.
4. In the Propagation Model column, change the value for all rows from PGM_850_Not_
Tuned.pmf to PGM_850_Tuned.pmf.
5. Click OK to apply your changes.
6. To see how tuning the model affects predictions, right-click the LTE_700MHz_1 site in
the Core group and generate predictions.
7. In the Project Explorer, expand site LTE_700MHz_1, right-click the LTE FDD base
station, and choose View Sector Predictions > Modeled > Reference Signal Receive
Power to display prediction in the Map window.
8. Use the Zoom buttons on the Main toolbar to better view the prediction.
9. To remove the prediction from the Map window, choose View > Predictions.
10. Click the Displayed tab, click Close All Tables and then click Close.
11. Do one of the following:
11
n
n
12
If you want to proceed to the next walkthrough, leave the Map window open.
If you want to stop here, choose File >Close Project, click Yes to confirm you
want to close the project and Yes to confirm you want to save the project.
Procedures
To generate predictions
1. Open the LTE FDD project.
2. In the Project Explorer, from the Category list, choose Sites.
3. Expand the Sites node.
4. Double-click LTE_700MHz_1 to open the Site Editor.
5. Click the Site User Data button next to the site name.
6. Click in the Value field next to Street Address and type 54 Park Ave.
As you will see later in the tutorial, you can use the Tabular Editor to quickly and easily
define attributes for multiple sites.
7. Right-click the LTE_700MHz_1 site and choose Generate Predictions.
8. In the Prediction Generator, click Generate.
9. When prediction generation is complete, click Close.
13
3. Expand the LTE_700MHz_1 site, right-click the LTE FDD base station, and choose
View Sector Predictions > Modeled >Reference Signal Received Power.
You could also view the sector prediction by expanding the Sites node and then
expanding the LTE_700MHz_1 site, and right-clicking the LTE FDD base station.
4. On the Main toolbar, click the Zoom In button
until you can view the prediction area.
The prediction layer shows the best server RSRP for the best carrier at each bin.
5. Choose View > Grid Legend.
6. In the Grid Legend dialog box, from the Grids list at the bottom of the dialog box,
choose CBs_LTE_700MHz_1_2_3_Reference Signal Received Power.grd.
7. Review the legend and close the window.
8. On the Grid Analysis toolbar, click the Grid Info
window.
The Grid Info dialog box opens. You can resize columns by clicking the heading
divider.
9. In the Map window, click anywhere on the displayed prediction layer to view
prediction values.
10. When you have finished, close the Grid Info dialog box.
14
If you want to proceed to the next walkthrough, leave the Map window open.
If you want to stop here, choose File >Close Project, click Yes to confirm you
want to close the project and Yes to confirm you want to save the project.
Procedure
1. With the LTE FDD project open in Mentum Planet, in the Project Explorer, in the Sites
category, expand the Sites node.
2. Double-click the LTE_700MHz_1 site.
3. In the tree view, choose sector 1.
4. On the General tab, in the Flags section, choose the On_Air condition for the Status
flag.
5. Repeat Step 4 for sectors 2 and 3.
6. Click OK.
When you click OK, your changes are applied and the dialog box is closed. When you
click Apply, your changes are applied but the dialog box remains open so that you can
make further changes.
All sectors at the site are now tagged as being On_Air. To change the status of all the
sites in the Core group in a similar fashion would be very time consuming. Using the
Tabular Editor, you can apply flags and conditions quickly to a group of sites.
7. Expand the Groups node, and then expand the Local node.
The numbers displayed after the Core group name (39/39/117/0) indicate the number
of sites, base stations, sectors, and repeaters in the group.
15
12. Click the Flag: Status column heading to select all rows.
13. Click the Paste From Clipboard button
16
If you want to proceed to the next walkthrough, leave the Map window open.
If you want to stop here, choose File >Close Project, click Yes to confirm you
want to close the project and Yes to confirm you want to save the project.
Procedure
To import network data
1. In the Project Explorer, in the Operational Data category, right-click the Network Data
node and choose New.
The Network Data Import Wizard opens.
2. Read the introduction and click Next.
3. Choose the Microsoft Excel option, browse to the Attachments\Local folder within the
dataset, select the Traffic.xls file, and then click Open.
4. In the Wizard, click Next.
5. To bind the network data to the Mentum Planet project, do the following:
n
n
button.
9. In the New Sector Display Scheme dialog box, type TrafficCounts and click OK.
10. In the Sector Display Scheme dialog box, click the Color tab.
17
11. Click Add and, in the Add Value dialog box, type 1000 and click OK.
12. Repeat Step 11 twice using the following values: 50 and 500.
13. Click the color swatch next to a value so that each value uses a unique color.
14. Click Apply to display sector symbols using color to identify traffic values.
15. Click OK and then, in the Report Preview dialog box, click Close.
16. To remove the sector display scheme, in the Project Data category, expand the
Sector Display Schemes node, right-click Default and choose Apply.
17. Click OK.
18. Do one of the following:
n
n
If you want to proceed to the next lesson, leave the Map window open.
If you want to stop here, choose File >Close Project, click Yes to confirm you
want to close the project and Yes to confirm you want to save the project.
n
18
Procedure
1. With the LTE FDD project open in Mentum Planet, in the Project Explorer, in the Project
Data category, right-click the Traffic Maps node and choose New.
2. In the Name box, type TO_Traffic_FromND.
3. In the Data Source section, choose the Network Data option.
4. In the Weighting section, choose None.
5. In the Unit section, change the Input Data Unit to Subscribers and the Output Data Unit
to Subscribers/km2.
6. Click Next.
The Traffic Data page displays with the Network Data selections already made.
7. In the Traffic Spreading Algorithm section, choose the Sector Service Probabilities
option.
8. Click Next.
9. On the Traffic Spreading Algorithm page, in the Selection Options section, choose
Group Selection and ensure the Core group is selected.
10. For all other values, accept the defaults, and click Finish.
11. When traffic map generation is complete, click Close.
The new traffic map is added beneath the Traffic Maps node.
19
12. To display the traffic map, in the Project Data category, expand the Traffic Maps
node and double-click the TO_Traffic_FromND file.
When you double-click an item in the Project Explorer, the default action is carried
out. A default action is displayed in bold on the Project Explorer shortcut menu. In
this case, the default action is View and so the traffic map displays in the Map
window. Use the Grid Legend command from the View menu to display the map
legend.
13. Choose GIS >Close Table to remove the traffic map layer from the Map window.
14. Do one of the following:
n
n
20
If you want to proceed to the next walkthrough, leave the Map window open.
If you want to stop here, choose File >Close Project, click Yes to confirm you
want to close the project and Yes to confirm you want to save the project.
Editing subscribers
The characteristics of subscribers are defined using the nodes in the Subscriber Settings
dialog box. The nodes within the Subscriber Settings dialog box represent building blocks for
subscriber types: Equipment Types, Services, and Subscriber Types. You can create a
diverse mix of subscribers by defining different services, quality types, and user equipment
types and assigning them to subscriber types.
Subscriber types are used with Monte Carlo simulations. Nominal analyses only require the
definition of equipment types.
In this walkthrough, you will modify subscriber settings to use the traffic map you created in
the previous walkthrough.
Note: Before beginning the walkthrough, download the dataset. See "Mentum Planet
Walkthrough topics" on page 3
Procedure
1. In Mentum Planet, do one of the following:
n
on the toolbar.
2. In the Subscriber Settings dialog box, expand the Equipment Types node, and choose
LTE UE.
3. On the Description tab, from the Technology list, choose Release 11.
Release 11 supports carrier aggregation and a new tab in support of this displays.
4. Click the Hardware tab and, in the Maximum PA Power box, type 22 dBm.
5. Expand the Subscriber Types node and choose LTE Subscriber Type.
6. Click the Configuration tab and from the Traffic Map list, choose TO_Traffic_FromND.
7. Click OK.
8. Do one of the following:
n
n
If you want to proceed to the next lesson, leave the Map window open.
If you want to stop here, choose File >Close Project, click Yes to confirm you
want to close the project and Yes to confirm you want to save the project.
21
22
Procedures
To generate a network analysis
1. With the LTE FDD project open in Mentum Planet, in the Project Explorer, in the
Network Analyses category, right-click the LTE FDD Analyses node, and choose
Default Layers.
By defining default layers, you can save time if you always generate the same layers.
2. In the LTE FDD Analysis Layers dialog box, click the Common node to clear all check
boxes.
3. Expand the node, enable the following check boxes and click OK.
n
Best Server
RSRP
Uplink C/(N+I)
23
Using an area grid you can focus an analysis on a specific area. In this way, you can
reduce the time required to generate outputs.
9. Click Next until the Final Step page of the Wizard displays.
10. On the last page of the Wizard, ensure the Save Settings and Generate Output option
is selected and click Finish.
11. When layer generation is complete, click Close.
button.
button.
3. In the Project Explorer, in the Network Analysis category, expand the LTE FDD
Analyses node, expand the Core node, expand the Common node, and right-click the
RSRP layer and choose View.
4. Click the second Map window to make it active and view the Uplink C/(N+I) layer.
5. On the Main toolbar, use any of the following tools to examine the layers:
n
Zoom In
Zoom Out
Grabber
6. After you have examined both layers, in the Project Explorer, in the Network
Analyses category, right-click the RSRP layer and choose Close.
7. Close the Uplink C/(N+I)layer.
8. Close the second Map window.
9. Do one of the following:
n
n
24
If you want to proceed to the next walkthrough, leave the Map window open.
If you want to stop here, choose File >Close Project, click Yes to confirm you
want to close the project and Yes to confirm you want to save the project.
Tip: When working with Mentum Planet, press F1 from any dialog box to open the online
Help.
Procedure
1. With the LTE FDD project open in Mentum Planet, in the Project Explorer, in the Monte
Carlo Simulations category, expand the LTE FDD Simulations node.
2. Right-click Toronto_Core and choose View Settings to examine defined parameters.
3. Close the dialog box.
4. Right-click Toronto_Core and choose Generate.
The Convergence Evolution window displays where you can view the progress of the
convergence.
1. When the simulation is complete, click Close.
2. Close the Convergence Evolution window.
3. Right-click the Toronto_Core simulation and choose Generate Reports
>Sector/Carrier.
4. Review report details and click Close.
5. Do one of the following:
25
n
n
26
If you want to proceed to the next walkthrough, leave the Map window open.
If you want to stop here, choose File >Close Project, click Yes to confirm you
want to close the project and Yes to confirm you want to save the project.
Procedure
1. With the LTE FDD project open in Mentum Planet, in the Project Explorer, in the
Network Analyses category, expand the LTE FDD Analyses node, the Core node, the
Common node, right-click the Best Server layer and choose Statistics.
2. In the Layer Statistics dialog box, on the Analysis Settings pane, from the Analysis
Area list, choose TO_Core.
3. Click Calculate Statistics.
The Report Preview dialog box opens where you can review layer statistics.
4. CTRL+Click the following column headings to select them:
n
Sector
button.
The Graph window opens with information displayed in a bar chart. You can change the
chart type to Lines or Points.
6. To narrow the focus of the graph, in the Show Top Elements box, type 5.
7. Close the Graph, Report Preview, and Layer Statistics dialog boxes.
8. Do one of the following:
n
n
If you want to proceed to the next walkthrough, leave the Map window open.
If you want to stop here, choose File > Close Project, click Yes to confirm you
want to close the project and Yes to confirm you want to save the project.
27
Procedure
1. With the LTE FDD project open in Mentum Planet, in the RFTools category, right-click
the Neighbor Plans node and choose New.
2. On the Name, Description, and Sectors page, in the Name box, type TorontoCore.
3. In the Sector Selection section, choose the Group Selection option and ensure the list
displays the Core group.
4. Click Next.
5. On the Neighbor Plan Type and Algorithm page, in the Algorithm section, choose the
Best Server option, click Next.
6. On the Carrier Selection page, click Next.
7. On the Algorithm Parameters page, from the Best Serving Sector Layer list, choose
Core_BestServer, and click Finish.
8. When the neighbor planning process is complete, click Close.
The new neighbor plan is added to the Neighbor Plans node in the Project Explorer.
9. To apply the new neighbor plan to sites in the Core group, in the RF Tools category,
right-click the neighbor plan you just created, and choose Apply > Replace.
10. Close the Message window.
11. In the Sites category, double-click site LTE_700MHz_1 to open the Site Editor.
28
12. In the tree view, choose sector 1 and click the Neighbor List tab to view neighbors.
13. Ctrl+Click or drag the cursor to select all sectors listed on the tab and click the View in
Map button to display neighbor relationships in the Map window.
14. Close the Site Editor.
15. To remove the neighbor list display, in the Windows category of the Project Explorer,
expand all nodes, right-click the NeighborList_SectorRelations layer and choose
Remove.
16. Do one of the following:
n
n
If you want to proceed to the next walkthrough, leave the Map window open.
If you want to stop here, choose File >Close Project, click Yes to confirm you
want to close the project and Yes to confirm you want to save the project.
29
Procedure
1. With the LTE FDD project open in Mentum Planet, in the Project Explorer, in the RF
Tools category, right-click the Interference Matrices node and choose New
>Downlink.
2. In the Sector Selection dialog box, choose the Core group, and click OK.
3. In the Generate a Downlink Histogram Interference Matrix dialog box, in the tree
view, choose Calculation.
4. In the Name box, type CoreIM.
5. In the Traffic section, enable the Use a Traffic Map, and choose TO_Traffic_FromND.
6. Click Generate, and once generation is complete, close the dialog box.
7. In the Project Explorer RF Tools category, expand the Interference Matrices node.
8. Right-click the CoreIM and choose View.
9. Review histogram interference matrix details and when you are finished, click Close.
10. Do one of the following:
n
n
30
If you want to proceed to the next walkthrough, leave the Map window open.
If you want to stop here, choose File >Close Project, click Yes to confirm you
want to close the project and Yes to confirm you want to save the project.
Procedures
To generate a physical cell IDplan
1. With the LTE FDD project open in Mentum Planet, in the RF Tools category, right-click
LTEFDD Frequency and Parameter Plans, and choose New.
2. In the LTE FDDAutomatic Frequency and Physical Cell ID Planning dialog box, in the
Plan Name box, type LTEFDD_Core.
3. From the Group to Plan list, choose Core.
4. From the Interference Matrix list, choose CoreIM.
5. In the Plan Generation Option section, choose Physical Cell ID Plan.
6. Click the Physical Cell ID tab and, from the Neighbor Plan list, choose TorontoCore.
7. In the Algorithm Ending section, do the following:
n
8. Use the default values for the remaining parameters and click Generate.
9. When plan generation is complete, review the details, and click Close.
Because no physical cell IDs have been applied to sectors, a message displays
indicating that the initial plan cost cannot be calculated. This message can be ignored
for the purpose of the walkthrough.
10. When prompted to save the plan, click Yes.
The new plan is added to the Project Explorer.
31
Enable the check boxes next to the 102, 103, and 104 Physical Cell IDs
5. ClickView.
The sectors using these PCIDs are displayed in red.
6. Click Close.
7. Do one of the following:
n
n
32
If you want to proceed to the next walkthrough, leave the Map window open.
If you want to stop here, choose File >Close Project, click Yes to confirm you
want to close the project and Yes to confirm you want to save the project.
Procedure
1. With the LTE FDD project open in Mentum Planet, in the Fixed Subscribers category,
expand the LTEFDD node, right-click the Downtown_Fixed_Subs table and choose
Analyze.
2. In the Sector Selection dialog box, choose the Downtown group, and click Next.
3. On the Analysis page, accept the defaults, and click Finish.
4. In Warning dialog box, click Yes to confirm that the analysis will use a mobile speed of
3 km/h.
5. When the analysis is complete, click Close.
6. To view analysis results, right-click the Downtown_Fixed_Subs table, and choose Edit
in Excel.
7. Do one of the following:
33
n
n
34
If you want to proceed to the next walkthrough, leave the Map window open.
If you want to stop here, choose File >Close Project, click Yes to confirm you
want to close the project and Yes to confirm you want to save the project.
Procedure
1. With the LTE FDD project open in Mentum Planet, in the Project Explorer, in the
Optimization category, expand the Optimization Profiles node, and double-click RSRP
and DL_CINR.
2. Expand the Goals node and, in turn, select the individual goals assigning a weight of 1
to the first goal and 2 to the second goal.
3. In the tree view, expand the Combined Goals node, and choose the RSRP_and_DL_
CINR combined goal to review goal settings.
4. Press F1 to view the online Help.
5. Click OK.
6. Expand the Optimizations node and then expand the Toronto_Site_Selection node.
7. Double-click the RSRP_and_DL_CINR_Outdoor optimization to regenerate the
optimization.
The Optimization window opens where you can view the progress of the optimization.
Information displayed includes:
n
Quality (%) versus Time graphthis graph displays the quality of the network
against each of the optimization goals that are part of the scenario. For example,
with a RSRP optimization goal, the graph displays the percentage of the
optimization area where the RSRP is above the threshold.
Convergence versus Timethis line displays the progress of the optimization and
the rate at which the network quality is improving.
35
8. When the optimization is complete and you have reviewed the information, click
Close.
9. Do one of the following:
n
n
36
If you want to proceed to the next walkthrough, leave the Map window open.
If you want to stop here, choose File >Close Project, click Yes to confirm you
want to close the project and Yes to confirm you want to save the project.
Procedure
1. With the LTE FDD project open in Mentum Planet, in the Project Explorer, in the Sites
category, expand the Sites node.
2. Click the Sites node.
A filter box is displayed.
3. In the box, type Site.
Only the newly generated sites are displayed.
4. Expand the Site_1 site.
5. Right-click the LTE FDD base station and choose Optimize.
6. In the Sector Selection, accept the default values, and click Select.
7. In the Site Optimization Tool dialog box, on the General tab, enable the Use a Traffic
Map check box and, from the associated list, choose TO_Traffic_From ND.
8. Click the Optimization tab.
9. Choose the Use Generic Goals option.
10. Clear the Optimize RSRP Coverage check box.
11. Enable the Optimize Interference check box and choose the Optimize RSRQ option.
12. In the RSRQ threshold box, type -18 dB.
13. Click Optimize.
37
14. When the optimization is complete, click Apply and then click Close.
15. In the Sites category, open Site_1 in the Site Editor.
16. In the tree view, select sector 2.
17. Click the Link tab and click Edit next to the Antenna list.
The General tab displays with an updated azimuth value.
18. Close the Site Editor.
38