Beruflich Dokumente
Kultur Dokumente
How to Guide
MyDLP Exchange Configuration
1. Content
This document contains information for configuration existing email server with Comodo
MyDLP
Putty (http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html)
WinSCP (http://winscp.net/eng/download.php)
3. Requirements
This article already assumes that you have installed MyDLP and DLP functions
working properly.
It is required to ensure that DNS addresses at /etc/resolve.conf of MyDLP server had
been properly configured. This is crucial because all email will be re-routed after DLP
inspection according to information gathered from these DNS servers.
This article already assumes that your Exchange Server is able to send emails
externally, and so it must have a Send Connector properly set up and configured
correctly on the Hub Transport Server. And so we only need to configure the settings
on that Send Connector.
10. Save and exit exit from the configuration file (main.cf) with CTRL+X key
combination
11. Restart the postfix service to make changes effective using following command
root@mydlp01:~# /etc/init.d/postfix restart
7. Select Route mail through the following smart host then click Add
8. Choose radio button labelled IP Address then enter IP address of your MyDLP Serve
9. Click OK*