Beruflich Dokumente
Kultur Dokumente
You get more ways to close a sack with MEYPACK, standard or customized to fit your
application:
Series S-CH/S...
Series PTS...
Series FTS...
Series S-CH...
MEYPACK supplies complete sack closing lines, beginning after the filling spout and
ending just before the palletizer. The program includes:
ASF Automatic stretcher/feeder
KGL Plastic open link conveyor
SB
PT 32-SOT
Series PT...
The PT...series sack closing machines from MEYPACK offer a
modular system for hermetically sealed closures on paper sacks
with plastic inner liners or coatings. The PT-closure is a triple
seal available in standard format or with an easy open feature.
With the traditional Standard closure (PT) the multi-layer
outer is stitched, a heat sealed tape is applied over the stitch
line and the PE inner liner is hermetically sealed. The tape prevents the ingress of insects and other forms of contamination.
With the easy open closure (PT-SOT, stitch over tape), the
inner liner is hermetically sealed by heat and a crepe tape is
applied over the sack top and stitched in position. The stitching
can easily be removed by hand without the use of tools and
without damage to the seal.
Features
rugged design for multi-shift operation
simple operating and maintenance interfaces with
easy accessibility
a minimum of change-over time is required for varying sack dimensions
manual or fully automatic sack feeding
compatible with any common open mouth sack
feeding system
high heat efficiency due to springloaded heater bars
swing needle sewing head minimises needle hole
sizes and reduces the risk of needle breakage
Method of operation
The PT... sack closing machines use a continuous process.
Heavy-duty carrier chains ensure that the flattened sack top is
perfectly aligned as it is passed through the various steps of the
closing operation. In addition the sack is supported by a
conveyor (additional equipment). Once in the chains the closing
sequence is fully automatic, although the functions may differ
in sequence, according to the closure specification.
SOT-closure
Machine Data
Type
Heating
section mm
Cooling
Bars max.
PT 24
3 x 200
PT 24 S
vmax.
m/min
Pdrive
kW
Pheating
kW
Length
mm
3 pairs
2,7
3200
4 x 200
2 pairs
4,5
3,6
PT 48
6 x 200
3 pairs
PT 72
9 x 200
6 pairs
10
PT 96
12 x 200
6 pairs
13,5
Width
mm
Height
mm
Mass
ca. kg
975
1910
600
3200
975
1910
600
5,4
3809
975
1910
700
1,6
8,1
5027
975
2070
900
1,6
10,8
5636
975
2070
1100
All dimensions are for the standard version. Further types and versions, e. g. with air cooling, are available.