Beruflich Dokumente
Kultur Dokumente
1.
2.
3.
4.
5.
6.
7.
Part-A
Answer All Questions
7x2=14
Justify the need of flux in welding
List any four arc welding devices
Why the electrode is covered in SMAW?
State the principle of electro slag welding
Differentiate - Consumable and Non Consumable electrode
Mention the process parameters of resistance welding
Differentiate - Flash butt and Upset butt welding
ME6008 & Welding Technology - Mech - VII Sem- I Test
1.
2.
3.
4.
5.
6.
7.
Part-A
Answer All Questions
7x2=14
Justify the need of flux in welding
List any four arc welding devices
Why the electrode is covered in SMAW?
State the principle of electro slag welding
Differentiate - Consumable and Non Consumable electrode
Mention the process parameters of resistance welding
Differentiate - Flash butt and Upset butt welding
1.
2.
3.
4.
5.
6.
7.
Part-A
Answer All Questions
7x2=14
Justify the need of flux in welding
List any four arc welding devices
Why the electrode is covered in SMAW?
State the principle of electro slag welding
Differentiate - Consumable and Non Consumable electrode
Mention the process parameters of resistance welding
Differentiate - Flash butt and Upset butt welding
1.
2.
3.
4.
5.
6.
7.
Part-A
Answer All Questions
7x2=14
Justify the need of flux in welding
List any four arc welding devices
Why the electrode is covered in SMAW?
State the principle of electro slag welding
Differentiate - Consumable and Non Consumable electrode
Mention the process parameters of resistance welding
Differentiate - Flash butt and Upset butt welding
4.
5.
6.
7.
1.
2.
3.
4.
5.
6.
7.
1.
2.
3.
4.
5.
6.
7.
1.
2.
3.
4.
5.
6.
7.
1.
2.
3.
4.
5.
6.
7.
1.
2.
3.
4.
5.
6.
7.
1.
2.
3.
4.
5.
6.
7.
1.
2.
3.
4.
5.
6.
7.
Part-A
Answer All Questions
7x2=14
1. Justify the need of flux in welding
2. List any four arc welding devices
3. Why the electrode is covered in SMAW?
1.
2.
3.
4.
5.
6.
7.
Part-A
Answer All Questions
7x2=14
Justify the need of flux in welding
List any four arc welding devices
Why the electrode is covered in SMAW?
State the principle of electro slag welding
Differentiate - Consumable and Non Consumable electrode
Mention the process parameters of resistance welding
Differentiate - Flash butt and Upset butt welding
ME6008 & Welding Technology - Mech - VII Sem- I Test
1.
2.
3.
4.
5.
6.
7.
Part-A
Answer All Questions
7x2=14
Justify the need of flux in welding
List any four arc welding devices
Why the electrode is covered in SMAW?
State the principle of electro slag welding
Differentiate - Consumable and Non Consumable electrode
Mention the process parameters of resistance welding
Differentiate - Flash butt and Upset butt welding
1.
2.
3.
4.
5.
6.
7.
Part-A
Answer All Questions
7x2=14
Justify the need of flux in welding
List any four arc welding devices
Why the electrode is covered in SMAW?
State the principle of electro slag welding
Differentiate - Consumable and Non Consumable electrode
Mention the process parameters of resistance welding
Differentiate - Flash butt and Upset butt welding
1.
2.
3.
4.
5.
6.
Part-A
Answer All Questions
7x2=14
Justify the need of flux in welding
List any four arc welding devices
Why the electrode is covered in SMAW?
State the principle of electro slag welding
Differentiate - Consumable and Non Consumable electrode
Mention the process parameters of resistance welding
7.
Differentiate - Flash butt and Upset butt
welding
Part-A
Answer All Questions
7x2=14
Justify the need of flux in welding
List any four arc welding devices
Why the electrode is covered in SMAW?
State the principle of electro slag welding
Differentiate - Consumable and Non Consumable
electrode
Mention the process parameters of resistance welding
Differentiate - Flash butt and Upset butt welding
1.
2.
3.
4.
5.
6.
7.
Part-A
Answer All Questions
7x2=14
Justify the need of flux in welding
List any four arc welding devices
Why the electrode is covered in SMAW?
State the principle of electro slag welding
Differentiate - Consumable and Non Consumable electrode
Mention the process parameters of resistance welding
Differentiate - Flash butt and Upset butt welding
Part-A
Answer All Questions
7x2=14
Justify the need of flux in welding
List any four arc welding devices
Why the electrode is covered in SMAW?
State the principle of electro slag welding
Differentiate - Consumable and Non Consumable electrode
Mention the process parameters of resistance welding
Differentiate - Flash butt and Upset butt welding
Part-A
Answer All Questions
7x2=14
Justify the need of flux in welding
List any four arc welding devices
Why the electrode is covered in SMAW?
State the principle of electro slag welding
Differentiate - Consumable and Non Consumable
electrode
Mention the process parameters of resistance welding
Differentiate - Flash butt and Upset butt welding
Part-A
Answer All Questions
7x2=14
Justify the need of flux in welding
List any four arc welding devices
Why the electrode is covered in SMAW?
State the principle of electro slag welding
Differentiate - Consumable and Non Consumable electrode
Mention the process parameters of resistance welding
Differentiate - Flash butt and Upset butt welding
Part-A
Answer All Questions
7x2=14
Justify the need of flux in welding
List any four arc welding devices
Why the electrode is covered in SMAW?
State the principle of electro slag welding
Differentiate - Consumable and Non Consumable electrode
Mention the process parameters of resistance welding
Differentiate - Flash butt and Upset butt welding
Part-A
Answer All Questions
7x2=14
Justify the need of flux in welding
List any four arc welding devices
Why the electrode is covered in SMAW?
State the principle of electro slag welding
Differentiate - Consumable and Non Consumable electrode
Mention the process parameters of resistance welding
Differentiate - Flash butt and Upset butt welding
ME6008 & Welding Technology - Mech - VII Sem- I Test
Part-A
Answer All Questions
7x2=14
Justify the need of flux in welding
List any four arc welding devices
Why the electrode is covered in SMAW?
State the principle of electro slag welding
Differentiate - Consumable and Non Consumable electrode
Mention the process parameters of resistance welding
Differentiate - Flash butt and Upset butt welding
Part-A
Answer All Questions
7x2=14
Justify the need of flux in welding
List any four arc welding devices
Why the electrode is covered in SMAW?
State the principle of electro slag welding
Differentiate - Consumable and Non Consumable electrode
Mention the process parameters of resistance welding
Differentiate - Flash butt and Upset butt welding
1.
2.
3.
4.
5.
6.
7.
Part-A
Answer All Questions
7x2=14
Justify the need of flux in welding
List any four arc welding devices
Why the electrode is covered in SMAW?
State the principle of electro slag welding
Differentiate - Consumable and Non Consumable electrode
Mention the process parameters of resistance welding
Differentiate - Flash butt and Upset butt welding
1.
2.
3.
4.
5.
6.
7.
1.
2.
3.
4.
5.
6.
7.
Part-A
Answer All Questions
7x2=14
Justify the need of flux in welding
List any four arc welding devices
Why the electrode is covered in SMAW?
State the principle of electro slag welding
Differentiate - Consumable and Non Consumable electrode
Mention the process parameters of resistance welding
Differentiate - Flash butt and Upset butt welding
ME6008 & Welding Technology - Mech - VII Sem- I Test
1.
2.
3.
4.
5.
6.
Part-A
Answer All Questions
7x2=14
Justify the need of flux in welding
List any four arc welding devices
Why the electrode is covered in SMAW?
State the principle of electro slag welding
Differentiate - Consumable and Non Consumable electrode
Mention the process parameters of resistance welding
Part-B
Answer any Three Questions
3x12=36
1. Sketch the three types of flames in oxy acetylene welding
and state their characteristics
2. Differentiate
a.
TIG and MIG welding
b.
Transferred and Non Transferred plasma arc welding
3. Describe the sequence of resistance spot welding with neat
sketches.
4. Explain the working principle of high frequency resistance
welding with neat sketch
Part-B
Part-B
Answer any Three Questions
3x12=36
5. Sketch the three types of flames in oxy acetylene welding
and state their characteristics
6. Differentiate
a. TIG and MIG welding
b. Transferred and Non Transferred plasma arc welding
Part-B
Answer any Three Questions
3x12=36
1. Sketch the three types of flames in oxy acetylene welding
and state their characteristics
2. Differentiate
Part-B
Answer any Three Questions
3x12=36
5. Sketch the three types of flames in oxy acetylene welding
and state their characteristics
6. Differentiate
Part-B
Answer any Three Questions
3x12=36
9. Sketch the three types of flames in oxy acetylene welding
and state their characteristics
10. Differentiate
a. TIG and MIG welding
Part-B
Answer any Three Questions
3x12=36
9. Sketch the three types of flames in oxy acetylene welding
and state their characteristics
10. Differentiate
a. TIG and MIG welding
b. Transferred and Non Transferred plasma arc welding
Part-B
Answer any Three Questions
3x12=36
5. Sketch the three types of flames in oxy acetylene welding
and state their characteristics
6. Differentiate
Part-B
Answer any Three Questions
3x12=36
5. Sketch the three types of flames in oxy acetylene welding
and state their characteristics
6. Differentiate
c.
TIG and MIG welding
d.
Transferred and Non Transferred plasma arc welding
Part-B
Answer any Three Questions
3x12=36
9. Sketch the three types of flames in oxy acetylene welding
and state their characteristics
10. Differentiate
Part-B
Answer any Three Questions
3x12=36
9. Sketch the three types of flames in oxy acetylene welding
and state their characteristics
10. Differentiate
Part-B
Answer any Three Questions
3x12=36
9. Sketch the three types of flames in oxy acetylene welding
and state their characteristics
10. Differentiate
e.
TIG and MIG welding
f.
Transferred and Non Transferred plasma arc welding
11. Describe the sequence of resistance spot welding with neat
sketches.
12. Explain the working principle of high frequency resistance
welding with neat sketch
Part-B
Answer any Three Questions
3x12=36
9. Sketch the three types of flames in oxy acetylene welding
and state their characteristics
10. Differentiate
a. TIG and MIG welding
b. Transferred and Non Transferred plasma arc welding
11. Describe the sequence of resistance spot welding with neat
sketches.
12. Explain the working principle of high frequency resistance
welding with neat sketch