Beruflich Dokumente
Kultur Dokumente
of
Philippine
Standards
Volume 6, Issue 2
April-June 2016
Standards Bulletin
DTI adopts International Standard to apply ISO 9001
to Computer Software
The Department of Trade and Industry- Bureau of Philippine Standards (DTI-BPS) has adopted
Contents
the International Standard on guidelines to apply ISO 9001 to computer software as Philippine National
Standard (PNS) the International Organization for Standardization-International Electrotechnical Commis-
Featured Standard I
PNS ISO/TS 22002-2:2013
PNS ASTM
PNS IEC
PNS IEC/TS
PNS ISO
PNS ISO/IEC
PNS UNR
Featured Standard II
PNS/IEC 60335-2-35:2016
ACRONYMS
ASTMAmerican Society
for Testing and Materials
IECInternational
Electrotechnical
Commission
ISO International
Organization of
Standardization
The DTI-BPS is the National Standards Body of the Philippines. It is the Philippines member to
the International Organization for Standardization (ISO) and International Electrotechnical Commission
(IEC).
A copy of the standard may be availed for a minimal fee from the Standards Data Centre at
751.4736 and standardsdatacenter@bps.dti.gov.ph.
TSTechnical Specification
UNRUnited Nation
Regulations
PNSASTMD2559:2016
Standard Specifica on for Adhesives for Bonded Structural
Wood Products for Use Under
Exterior Exposure Condi ons
(ASTM published 2012)
ICS 79.060.10
PNSASTMD4688:2016
Standard Test Method for Evalua ng Structural Adhesives for
Finger Join ng Lumber
(ASTM published 2014)
ICS 83.180
PNSASTMD4688:2016
Standard Test Method for Evalua ng Structural Adhesives for
Finger Join ng Lumber
(ASTM published 2014)
ICS 83.180
PNS IEC
PNSIEC6033524:2016
Household and similar electrical
appliances - Safety - Part 2-4:
Par cular requirements for spin
extractors
(IEC published 2012)
ICS 13.120, 97.060
Page 2
PNSIEC600343:2016
Rota ng electrical machines - Part 3:
Specific requirements for synchronous
generators driven by steam turbines or
combus on gas turbines
(IEC published 2007)
ICS 29.160
PNSIEC6033527:2016
Household and similar electrical appliances - Safety - Part 2-7: Par cular requirements for washing machines
(IEC published 2012)
ICS 13.120, 97.060
PNSIEC6033529:2016
Household and similar electrical appliances - Safety - Part 2-9: Par cular requirements for grills, toasters and similar portable cooking appliances
(IEC published 2012)
ICS 13.120, 97.040.50
PNSIEC60335214:2016
Household and similar electrical appliances - Safety - Part 2-14: Par cular
requirements for kitchen machines
(IEC published 2012)
ICS 13.120, 97.040.50
PNSIEC60335215:2016
Household and similar electrical appliances - Safety - Part 2-15: Par cular
requirements for appliances for hea ng
liquids
(IEC published 2012)
ICS 13.120, 97.040.50
PNSIEC60335235:2016
Household and similar electrical appliances - Safety - Part 2-35: Par cular
requirements for instantaneous water
heaters
(IEC published 2012)
ICS 13.120, 97.040.50
PNSIEC60335274:2016
Household and similar electrical appliances - Safety - Part 2-74: Par cular
requirements for portable immersion
heaters
(IEC published 2009)
ICS 13.120, 97.040.50
PNSIEC60335280:2016
Household and similar electrical appliances - Safety - Part 2-80: Par cular
requirements for fans.
(IEC published 2015)
ICS 23.120
PNSIEC8852811:2016
Reciproca ng internal combus on engine driven alterna ng current genera ng sets -- Part 11: Rotary uninterrup ble power systems -- Performance requirements and test methods
PNS IEC/TS
PNSIECTS6003423:2016
Rota ng electrical machines - Part 2-3:
Specific test methods for determining
losses and eciency of
Converter-fed AC induc on motors
(IEC published 2013)
ICS 29.160
PNS ISO
PNSISO85283:2016
Reciproca ng internal combus on engine driven alterna ng current genera ng sets -- Part 3: Alterna ng current
generators for genera ng sets
(ISO published 2005)
ICS 27.020; 29.160.20; 29.160.40
PNSISO85284:2016
Reciproca ng internal combus on engine driven alterna ng current genera ng sets -- Part 4: Controlgear and
switchgear
(ISO published 2005)
ICS 27.020; 29.160.40
PNSISO85285:2016
Reciproca ng internal combus on engine driven alterna ng current genera ng sets -- Part 5: Genera ng sets
(ISO published 2013)
ICS 27.020; 29.160.40
PNSISO85286:2016
Reciproca ng internal combus on engine driven alterna ng current genera ng sets -- Part 6: Test methods
(ISO published 2005)
ICS 27.020; 29.160.40
PNSISO85287:2016
Reciproca ng internal combus on engine driven alterna ng current genera ng sets -- Part 7: Technical declaraons for specifica on and design
(ISO published 1994)
ICS 29.160.40
PNSISO85289:2016
Reciproca ng internal combus on engine driven alterna ng current genera ng sets -- Part 9: Measurement and
evalua on of mechanical vibra ons
(ISO published 1995)
PNSISO852810:2016
Reciproca ng internal combus on engine driven alterna ng current genera ng sets -- Part 10: Measurement of
airborne noise by the enveloping surface
method
(ISO published 1998)
ICS 17.140.20; 29.160.4
PNSISO852812:2016
Reciproca ng internal combus on engine driven alterna ng current genera ng sets -- Part 12: Emergency power
supply to safety services
(ISO published 1997)
ICS 29.160.40
PNSISO9202:2016
Jewellery -- Fineness of precious metal
alloys
(ISO published 2014)
PNSISO10364:2016
Structural adhesives -- Determina on of
the pot life (working life) of mul component adhesives
(ISO published 2015)
ICS 83.180
PNSISO11210:2016
Jewellery -- Determina on of pla num
in pla num jewellery alloys -- Gravimetric method a er precipita on of diammonium hexachloropla nate
(ISO published 2014)
ICS 39.060
PNSISO11426:2016
Jewellery -- Determina on of gold in
gold jewellery alloys -- Cupella on method (fire assay)
(ISO published 2014)
PNSISO11427:2016
Jewellery -- Determina on of silver in
silver jewellery alloys -- Volumetric
(poten ometric) method using potassium bromide
(ISO published 2014)
PNSISO11490:2016
Jewellery -- Determina on of palladium
in palladium jewellery alloys -- Gravimetric determina on with dimethylglyoxime
(ISO published 2015)
ICS 39.060
PNSISO11494:2016
Jewellery -- Determina on of pla num
in pla num jewellery alloys -- ICP-OES
method using y rium as internal standard element
(ISO published 2014)
ICS 39.060
PNSISO11495:2016
Jewellery -- Determina on of palladium
in palladium jewellery alloys -- ICP-OES
method using y rium as internal standard element
(ISO published 2014)
ICS 39.060
PNSISO13756:2016
Jewellery -- Determina on of silver in
Page 3
PNS ISO/IEC
PNSISO/IEC7064:2016
Informa on technology -- Security techniques -- Check character systems
(ISO/IEC published 2003)
ICS 35.040
PNSISO/IEC97972:2016
Informa on technology -- Security techniques -- Message Authen ca on Codes
(MACs) -- Part 2: Mechanisms using a
dedicated hash-func on
(ISO/IEC published 2011)
ICS 35.040
PNSISO/IEC97973:2016
Informa on technology -- Security techniques -- Message Authen ca on Codes
(MACs) -- Part 3: Mechanisms using a
universal hash-func on
(ISO/IEC published 2011)
ICS 35.040
PNSISO/IEC97986:2016
Informa on technology -- Security techniques -- En ty authen ca on -- Part 6:
Mechanisms using manual data transfer
(ISO/IEC published 2010)
ICS 35.040
PNSISO/IEC10116:2016
Informa on technology -- Security tech-
PNS UNR
PNSUNR84:2016
Uniform provisions concerning the approval of passenger cars equipped with
an internal combus on engine with regard to the measurement of fuel consump on
(UN published 1991)
ICS 43.060.40
PNSUNR89:2016
Uniform provisions concerning the approval of the following:
I. Vehicles with regard to limita on of
their maximum speed
II. Vehicles with regard to the installaon of a speed limita on device (SLD) of an approved type
III. Speed limita on devices (SLD)
(UN published 1993 with Amendment
1:2002, Corrigendum 1:2008 and
Amendment 2:2011)
ICS 43.060.30: 43.080
PNSUNR101:2016
Uniform provisions concerning the approval of passenger cars powered by an
internal combus on engine only, or
powered by a hybrid electric power train
with regard to the measurement of the
emission of carbon dioxide and fuel consump on and electric range, and of categories M1 and N1 vehicles powered by
an electric power train only with regard
to the measurement of electric energy
consump on and electric range
(UN published 2013 with Amendment
1:2013, Amendment 2:2014, Amendment 3:2015, and Amendment 4:2016)
ICS 43.120
Informaon Technology
Page 4
BPS Address :
3rd Floor DTI Bldg.
361 Senator Gil Puyat Avenue, Makati City, Philippines
Tel No. : 751.4736
Fax No. : 751.4748; 751.4735
Email Address:
bps@dti.gov.ph
standardsdatacenterbps@dti.gov.ph
Website:
www.bps.dti.gov.ph