Beruflich Dokumente
Kultur Dokumente
b) m
c) kg/m
d) m
2. The slope on the road surface generally provided on the curves is known as
a) Angle of friction
b) Angle of repose
c) Angle of banking
d) None of these
4.
The centre of gravity of an isosceles triangle with base (p) and sides (q) from its base is
a) [(4p - q)]/6
b) (4p - q)/6
c) (p - q)/4
d) (p + q)/4
5. On a ladder resting on smooth ground and leaning against vertical wall, the force of
friction will be
a) Towards the wall at its upper end b) Away from the wall at its upper end
c) Upwards at its upper end
b) (gh)
c) (2gh)
d) 2g.h
b) bh3/8
c) bh3/12
d) bh3/36
13. A flywheel on a motor goes from rest to 1000 rpm in 6 sec. The number of revolutions made
is nearly equal to
a) 50
b) 100
c) 250
d) 25
17. The angular velocity (in rad/s) of a body rotating at N revolutions per minute is
a) N/60
b) N/180
c) 2N/60
d) 2N/180
18. In determining stresses in frames by methods of sections, the frame is divided into two
parts by an imaginary section drawn in such a way as not to cut more than
a) Two members with unknown forces of the frame
b) Three members with unknown forces of the frame
c) Four members with unknown forces of the frame
d) Three members with known forces of the frame
19. A machine having an efficiency greater than 50%, is known as
a) Reversible machine
b) Non-reversible machine
d) Ideal machine
20. The algebraic sum of moments of the forces forming couple about any point in their plane
is
a) Equal to the moment of the couple
b) Constant
21. In the lever of third order, load W, effort P and fulcrum F are oriented as follows
a) W between P and F
b) F between W and P
c) P between W and F
24. The skidding away of the vehicle on a level circular path can be avoided if the force of
friction between the wheels and the ground is __________ the centrifugal force.
a) Less than
b) Greater than
c) Equal to
d) None of these
26. .The time of flight (t) of a projectile on an upward inclined plane is(where u = Velocity of
projection, = Angle of projection, and = Inclination of the plane with the horizontal.)
27. The resultant of two forces P and Q (such that P > Q) acting along the same straight line,
but in opposite direction, is given by
a) P + Q
b) P Q
c) P / Q
d) Q / P
28. The periodic time (T) is given by (where, = Angular velocity of particle in rad/s.)
a) /2
b) 2/
c) 2
d) /
29. A weight of 1000 N can be lifted by an effort of 80 N. If the velocity ratio is 20, the machine
is
a) Reversible
b) Non-reversible
c) Ideal
d) None of these
30. Centre of gravity of a solid cone lies on the axis at the height
a) One fourth of the total height above base
b) One third of the total height above base
c) One-half of the total height above base
d) Three eighth of the total height above the base
31. If three forces acting in one plane upon a rigid body, keep it in equilibrium, then they must
either
a) Meet in a point
b) Be all parallel
d) All the
b) Doubled
c) Quadrupled
34.
35.
36.
37.
38.