Beruflich Dokumente
Kultur Dokumente
ShipViewer
Operator Manual
334967/A
June 2009
Document history
Document number: 334967
Rev. A
June 2009
First issue.
The reader
This Operator Manual describes how to use the FleetMaster ShipViewer controls and display facilities. It
is intended for system operators. He/she should be experienced in the operation of alarm and monitoring
systems and have basic knowledge of personal computers or should have attended a Kongsberg Maritime
training course.
Note
The information contained in this document remains the sole property of Kongsberg Maritime AS. No
part of this document may be copied or reproduced in any form or by any means, and the information
contained within it is not to be communicated to a third party, without the prior written consent of
Kongsberg Maritime AS.
Kongsberg Maritime AS endeavours to ensure that all information in this document is correct and fairly
stated, but does not accept liability for any errors or omissions.
Warning
The equipment to which this manual applies must only be used for the purpose for which it was
designed. Improper use or maintenance may cause damage to the equipment and/or injury to personnel.
The user must be familiar with the contents of the appropriate manuals before attempting to operate
or work on the equipment.
Kongsberg Maritime disclaims any responsibility for damage or injury caused by improper installation,
use or maintenance of the equipment.
Comments
To assist us in making improvements to the product and to this manual, we welcome comments and
constructive criticism.
e-mail: km.documentation@kongsberg.com
Operator Manual
Table of contents
1
INTRODUCTION ................................................................ 5
2
2.1
2.2
2.3
3
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
3.9
SHIPVIEWER DISPLAYS.................................................. 10
Alarm Group display ..............................................................................................10
Alarm Summary display......................................................................................... 11
Alarm History display ............................................................................................12
Counter display.......................................................................................................13
Distributed Processing Unit (DPU) display ..........................................................14
Deviation display....................................................................................................15
Selected Points display ...........................................................................................16
Selected Trend display ...........................................................................................18
Selected Bargraph display ......................................................................................19
4
4.1
4.2
4.3
334967/A
Kongsberg FleetMaster
334967/A
Introduction
1 INTRODUCTION
ShipViewer is a software package that runs on a standard personal
334967/A
Kongsberg FleetMaster
Fire system
Tank system
334967/A
User interface
2 USER INTERFACE
2.1 Menus
All ShipViewer functions are available through the menu bar.
File
Displays
334967/A
Kongsberg FleetMaster
Settings
Tiled view
Help
334967/A
User interface
Print preview
Alarm Summary
display
Save
Open
Counter display
Help
Distributed Processing
Unit (DPU) display
Previous window
Deviation display
Next window
334967/A
Kongsberg FleetMaster
3 SHIPVIEWER DISPLAYS
3.1 Alarm Group display
The Alarm Group display shows all measuring
points in the pre-defined alarm groups. These
groups were defined during commissioning of
the K-Chief 500 alarm and monitoring system.
When selecting the Alarm Group display, a
dialogue containing all alarm groups appears on
the screen. In this dialogue all alarm groups with
active alarms are indicated by a red dot.
Select an alarm group by clicking on its button.
To switch between the alarm group view and
group view, repeatedly click on the Alarm
Display/Group Display button (down to the left).
The alarm and group displays are sorted by tag
name.
10
334967/A
ShipViewer displays
334967/A
11
Kongsberg FleetMaster
12
334967/A
ShipViewer displays
334967/A
13
Kongsberg FleetMaster
14
334967/A
ShipViewer displays
334967/A
15
Kongsberg FleetMaster
1
2
16
334967/A
ShipViewer displays
334967/A
Mark a tag and click Add. Repeat for all tags requested.
17
Kongsberg FleetMaster
18
334967/A
ShipViewer displays
334967/A
19
Kongsberg FleetMaster
Background: White
20
334967/A
334967/A
Browse for the requested file and location, and click Open.
By default, the file will be displayed using MS Paint, but
other programs for viewing, editing or creating bitmap
images may also be used.
21
2009
Kongsberg Maritime