All MP2-5 mountings need to be inspected according to the test protocols below.
Quality Protocol Supplier:
1. Measurement report of mountings confirming product is according drawing: S01-0MP2-002* S01-0MP3-002* S01-0MP4-002* S01-0MP5-002* 2. Static stiffness test (according to Static measurements MP2-5 file), maximum deviations +-10%* 3. Dynamic test (according to Dynamic measurements MP2-5 file), maximum deviations +-10%** 4. Visual inspection of elements (confirming no air inclusion/cracks in rubber)* 5. Chemical laboratory test report of rubber compound (confirming the compound characteristics) All the certificates / tests have to be signed by Manufacturer. Certificates / test results have to be send by E-mail to Rubber Design. Rubber Design needs to approve the test results before parts can be shipped.
* Random sample size as given in Table 1
** Random sample size as given in Table 2 Printed : 15 mei 2014
Owner : R&D
QUALITY PROTOCOL : Q01-0MP5-024
Created : 30-10-2013
Random sample size at given batch size:
Batch size : 2 up to and including 8 pieces 9 up to and including 15 pieces 16 up to and including 25 pieces 26 up to and including 50 pieces 51 up to and including 90 pieces 91 up to and including 150 pieces 151 up to and including 280 pieces 281 up to and including 500 pieces 501 up to and including 1200 pieces 1201 up to and including 3000 pieces 3001 and up pieces
1 piece is out of tolerance 1 piece is out of tolerance 1 piece is out of tolerance 1 piece is out of tolerance 1 piece is out of tolerance 1 piece is out of tolerance 2 pieces are out of tolerance 2 pieces are out of tolerance 3 pieces are out of tolerance 4 pieces are out of tolerance 6 pieces are out of tolerance
Table 1, random sample size
Random sample size for dynamic testing at given batch size:
Batch size : 2 up to and including 100 pieces 101 up to and including 500 pieces 501 up to and including 1000 pieces 1001 up to and including 3000 pieces 3001 and up pieces
Random sample size:
2 pieces 3 pieces 4 pieces 6 pieces 8 pieces
Reject batch if:
1 piece is out of tolerance 1 piece is out of tolerance 1 piece is out of tolerance 1 piece is out of tolerance 1 piece is out of tolerance