Beruflich Dokumente
Kultur Dokumente
(2)
-3-
ROI-S06907
(3)
Click the Phone and Modem Options icon in the Control Panel window to start
configuring the modem.
(4)
If Location Information window will appear, enter your country and area code and then
click [OK].
-4-
ROI-S06907
(5)
(6)
Select the Modem tab. Click [Add] to continue with adding the new modem for the PNMT.
-5-
ROI-S06907
(7)
(8)
Select Standard Modem Types from the list of Manufacturers and Standard 19200bps
Modem from the Models. Click [Next] to continue.
-6-
ROI-S06907
(9)
-7-
ROI-S06907
(11) Verify that Standard 19200 bps Modem and COM1 are displayed. Click [OK].
-8-
ROI-S06907
(2)
-9-
ROI-S06907
(3)
(4)
Insert the USB driver CD-ROM in the computers disk drive and set Search for driver
software in this location and click [Next].
- 10 -
ROI-S06907
(5)
(6)
- 11 -
ROI-S06907
(7)
NOTE
There is a possibility that the USB connection is dropped
during a long-duration operation depending on the device type of
computer. In the case of a connection failure, please
reestablish the dial-up connection.
- 12 -
ROI-S06907
4. Dial-up Setting
(1)
Click Start | Control Panel and the Network and Sharing Center icon to start configuring
the Dialup setting.
(2)
The Network and Sharing Center window appears. Click Setup a connection or network in
the Tasks area.
- 13 -
ROI-S06907
(3)
The Set up a connection or network window appears. Select [Connect to a workplace] and
click [Next].
- 14 -
ROI-S06907
- 15 -
ROI-S06907
(5)
In the New Connection Wizard window, input connection name and Dial-up phone
number field.
Check Dont connect now... and click [Next].
In case of connecting with RS232C-Type [PNMT(RS232C)]
- 16 -
ROI-S06907
(6)
(7)
- 17 -
ROI-S06907
(8)
The Network and Sharing Center window appears. Click [Manage network connections ]
in the Connect Dial-up Connection window
(9)
Select Connection and Right Click , Appear context menu and select Connections
properties.
- 18 -
ROI-S06907
(10) In the Properties Window click on the General tab. Click [Configure].
RS232C setting
USB setting
RS232C setting
USB setting
- 19 -
ROI-S06907
(12) Retain the default setting on the Options tab and click the PPP Setting.
RS232C setting
(13)
USB setting
In the PPP Setting window, uncheck all the boxes. Click [OK] to go back to the previous
window. And click the Security tab.
- 20 -
ROI-S06
(14) Retain the default setting on the Security tab and click the Networking tab.
RS232C setting
(15)
USB setting
On the Networking tab, uncheck File and Printer ... and Client for Microsoft... and Internet
Protocol Version 6(TCP/IPv6)
RS232C setting
USB setting
- 21 -
ROI-S06907
Verify that both Obtain an IP address automatically and Obtain DNS server address
automatically are selected.
In the Advanced TCP/IP Settings window, uncheck Use IP header compression for the
PPP link. Click [OK].
- 22 -