Beruflich Dokumente
Kultur Dokumente
Performance
Energietechnik Essen GmbH is a top-ranking company in the field of highly specialised and safety-relevant high-tech products: retaining rings and nitrogen-alloyed
steels. Sophisticated remelting equipment (electroslag and pressurised electroslag
remelting) and our cold expanding press enable us to manufacture these unique
products.
Market
Our products provide safety. Retaining rings are used on the shaft ends of power
generators in order to prevent the copper wiring from being displaced by the centrifugal
forces that occur at high rotational speeds. HNS qualities are used as ball screws
for the adjustment of the pitch elevator in aviation, for example. Other important
areas of application include bearings, medical technology and high-quality machine
construction.
Quality
Products from Energietechnik Essen GmbH have to fulfil the highest quality
requirements. This is assured by means of an integrated quality management
system which is implemented meticulously throughout the entire process from
procurement via production to delivery of the finished goods.
Service
Customer service for our products is a top priority for us. It includes all-round
consultancy in matters relating to metallurgy, heat treatment and materials
engineering. A further significant aspect is damage assessment and materials
testing carried out at our own onsite laboratory.
Our Company
Energietechnik Essen GmbH is a young
company which, however, looks back
over a long tradition. It was founded in
1811 as a part of the Friedrich Krupp AG.
Following various restructuring
measures and a series of ownership
changes, Energietechnik Essen GmbH
was ultimately established in 2003.
For over 100 years now retaining rings
Retaining rings
The combination of different specifications, namely
melting
rod forging
ring pre-forging
remelting
rough turning
heat treatment
finish machining
test laboratory
cold expanding
non-destructive
testing
Our Markets
bearings
cutting instruments and knives
tension rods
fastenings and fixations
medical technology
Melting
PESR-remelting
rod steel, wire,
sheet metal etc.
deformation /
semi-finished material
if applicable,
heat treatment
if applicable,
non-destructive testing
Quality Assurance
Our integrated management system constitutes a close-knit trio comprising
quality management, health and safety at work and environmental protection
(including energy).
Under application of the Six Sigma strategy, we have established a modern
quality management system which has a holistic and all-encompassing
influence on our concepts as well as our actions.
m.kausler@energietechnik-essen.de
m.sobiella@energietechnik-essen.de
c.scholz@energietechnik-essen.de
m.hanke@energietechnik-essen.de
Head of Sales
Jrg Schulze
www.energietechnik-essen.de
j.schulze@energietechnik-essen.de
r.ritzenhoff@energietechnik-essen.de
FS 01-PB[Kappenringe];EN;1/07.10/XXXXXX
Services