Beruflich Dokumente
Kultur Dokumente
ACTUATORS
3
5
6
3
ACT-2
www.norgren.com/info/US-ACT-2
Series A Cylinders are constructed with the finest materials for each component!
5 Ultra Cushion Seals: Advanced design
5
4
3
ACTUATORS
1
2
11
9
10 Wiper Seal: Lip-type urethane
wiper seal keeps contaminates
from getting into cylinder by
aggressively wiping foreign materials from the
piston rod, enhancing the
rod seal life.
Application Information
Series A NFPA interchangeable aluminum air cylinders
are offered with a variety of accessories, standard and
optional equipment to meet your application needs.
12
12
10
13
12 Piston Seals: Long-wearing
nitrile seals.
13 Wear Ring: Reinforced Teflon
compounded with polyphenylene sulfide provides
supreme wear and excellent bearing support.
ACT-3
Series EA Ecology Cylinders are constructed with the finest materials for
each component!
1
2
ACTUATORS
9
8
4
10
12
11
13
8
ACT-4
www.norgren.com/info/US-ACT-4
The piston rod is self-lubricated by the oilimpregnated rod bearing during operation.
Lubrication between piston and cylinder barrel is
derived from the polishing qualities of the
reinforced Teflon wear ring.
The low friction surfaces extend the life of the
seals beyond normal expectations, permitting
Norgren to unconditionally guarantee
non-lubricated operation for one full year.
Series EA cylinders are NFPA interchangeable
and are available in many different mounting
styles.
Energy Absorption
Capacity of the Impact
Dampening Seals
Operates Quietly
to Meet
OSHA Specifications.
Cylinder Model
EA155B3 A1133A3
5" x 6"
2" x 6"
A133B3
5" x 6"
End++
108
73
110
Side++
112
84
110
81
End++
108
73
113
74
Side++
113
85
110
81
This chart features the energy absorption capacity of the impact dampening piston seals with Non-Adjustable
cushions. For higher loads and velocities please refer to the Decel-Air Cushion Option on ACT-1-9.
In/Sec
11/2
155.6
38.4
16.7
9.2
5.6
3.7
2.6
1.8
1.3
1.0
21/2
499.8
123.4
53.7
29.4
18.1
11.9
8.2
5.8
4.2
3.0
31/4
969.3
239.7
104.6
57.3
35.4
23.5
16.3
11.7
8.5
6.2
Cylinder Bore
4
1505.4
372.6
162.8
89.4
55.4
37.0
25.8
18.6
13.6
10.1
6
4159.8
1030.2
450.6
247.8
153.9
102.9
72.2
52.2
38.5
28.7
7
5794.2
1435.8
628.7
346.2
215.4
144.4
101.6
73.8
54.7
41.1
8
8067.6
2000.4
876.8
483.6
301.6
202.7
143.1
104.4
77.9
58.9
Series EA cylinders have a impact dampening Note: The use of Viton Seals limits the absorption of the impact dampening seals by 50%.
piston seal that accomplishes 80% of the
Energy absorption capacity of the impact dampening piston seals
actual load stopping. The air cushion accounts
with an adjustable cushion.
for only 20%. (A conventional air cushioning
Cylinder Bore
cylinder depends 100% on the compressibility
In/Sec
11/2
2
21/2
31/4
4
5
6
of air to do the stopping.) The EA seal absorbs
6
279
495
899
1,744
2,709
4,685
7,486
high impact loads allowing the effect of the air
12
68
122
221
430
699
1,159
1,854
18
30
53
95
187
291
507
810
cushion to be reduced by using a larger air
24
16
29
52
102
160
279
444
cushion bleed orifice. As a result the piston can
30
10
18
32
63
99
172
275
move at a faster speed for a longer period of
36
6.7
12
21.6
42
66
116
183
42
4.7
8.3
14.7
29
46
81
129
time before the EA seal does the final stopping.
48
3.4
5.7
10.4
21
33
59
93
See illustration at top of ACT-4 for cushion
54
2.3
4.3
7.6
15.3
24
43
68
operation.
60
1.8
3.2
5.4
11
18
33
52
7
10,429
2,583
1,130
622
387
259
181
131
97
74
8
4,520
3,800
1,576
869
541
363
257
187
138
106
6
12
18
24
30
36
42
48
54
60
2
275.5
68.1
29.7
16.3
10.0
6.7
4.6
3.2
2.4
1.8
5
2603.2
644.8
282.1
155.2
96.4
64.5
45.3
32.8
24.2
18.1
*The weight of the cylinder piston has been deducted from the figures shown above.
11/2
.14
.10
.07
.04
.02
0
2
.15
.10
.07
.04
.02
0
21/2
.17
.12
.08
.05
.02
0
31/4
.19
.14
.09
.05
.02
0
Cylinder Bore
4
.22
.16
.10
.06
.03
0
5
.25
.18
.12
.07
.03
0
6
.28
.20
.13
.07
.03
0
7
.32
.22
.14
.08
.04
0
8
.32
.22
.14
.08
.04
0
Note: These figures are for new cylinders. The impact dampening seals will take some compression set during operation
of the cylinder and the stroke loss will decrease. Also, the pressure at zero stroke loss will decrease to about 80 psi.
At pressures above those of zero stroke loss, a slight clicking sound may be produced during impact.
To determine the stroke loss for either the head or cap end, divide the value shown by 2.
ACT-5
ACTUATORS
Norgren Guarantees
Non-lubricated Operation
for a Full Year!
As the piston continues its travel to the point of impact with the
end caps, the compressive qualities of the EJ seal provide the
final decelerating force. This action compresses the EJ seal and
absorbs the remaining kinetic shock vibration and noise
created by the impact.
Operating Temperatures:
Lubrication:
Side Loading:
Series EA
None required
Norgren Air Cylinders are rated for no lube
added service. All internal components are
lubricated at time of assembly with a Teflon
based grease.
-20F to 200F
(-29C to 107C)
-20F to 400F
(-29C to 204C)
Operating Pressure:
ACTUATORS
Supply:
Filtered compressed air to 250 PSI
Materials:
Head and End Caps: black anodized
6061-T6 aluminum
Tube: 6063-T832 aluminum, clear
anodized O.D., hardcoat anodized I.D.
Rod: hard chrome plated steel
Piston: machined high-strength
aluminum alloy
Rod Bearing: oil impregnated sintered iron
Seals: nitrile rod seal, urethane rod wiper,
nitrile piston seals, nitrile tube end seals
Tie Rods: high-tensile strength steel
an average application and will help you in
selecting the proper cylinder model and size for
your particular application.
Note: 1-1/2", 2", 2-1/2", 3-1/4", 4" and 5" bore
cylinders with 1/2" to 2" strokes will be furnished
with a short head cushion sleeve and short cap
cushion spear.
Only available on 5/8" and 1" rods.
Ultra Cushion
A Major Design and Performance
Breakthrough in Air Cylinder Cushioning
Systems!
Norgrens advanced cushion design features a unique,
one-piece, nitrile compound seal that is captured within
a precision machined groove. This allows both linear and
radial float of the cushion seal which virtually
eliminates problems associated with misalignment.
Integral flow paths molded in the periphery of the seal
provide exceptionally fast out of cushion stroke
reversal without the use of ball checks.
ACT-6
Figure 1
www.norgren.com/info/US-ACT-6
Tie
7 Rods: High-strength steel maintains uniform
compression on tube end seals.
6
7
5
4
3
ACTUATORS
1
2
10
11
12 13
12
9
10 Wiper Seal: Lip-type urethane wiper seal
keeps contaminates from getting into cylinder
by aggressively wiping foreign materials from
the piston rod, enhancing the rod seal life.
Application Information
ACT-7
Series EJ Ecology Cylinders are constructed with the finest materials for
each component!
1 Ultra Cushion Seals: Advanced design
features a unique, one-piece, compound seal of
nitrile* captured within a precision machined
groove. Linear and radial float of the cushion
seals eliminates misalignment. Ultra Cushions
provide exceptionally fast out of cushion
stroke reversal. (Head and Cap Cushions are
optional.)
*Nitrile seals on the 5/8" & 1" rod diameter.
For rod sizes 1-3/8" and larger, urethane seals are standard.
1
2
3
ACTUATORS
9
8
4
10
12
11
ACT-8
13
8
12 Rod Seal: Nitrile lip-type seal is pressure
energized and wear compensating for durability
and long life.
www.norgren.com/info/US-ACT-8
The piston rod is self-lubricated by the oilimpregnated rod bearing during operation.
Lubrication between piston and cylinder barrel is
derived from the polishing qualities of the
reinforced Teflon wear ring.
The low friction surfaces extend the life of the
seals beyond normal expectations, permitting
Norgren to unconditionally guarantee nonlubricated operation for one full year.
Series EJ cylinders are NFPA interchangeable
and are available in many different mounting
styles.
Energy Absorption
Capacity of the Impact
Dampening Seals
Operates Quietly
to Meet
OSHA Specifications.
J133B3
5" x 6"
Cylinder Model
EJ155B3 J1133A3
5" x 6"
2" x 6"
End++
108
73
110
Side++
112
84
110
81
End++
108
73
113
74
Side++
113
85
110
81
This chart features the energy absorption capacity of the impact dampening piston seals
with a Non-Adjustable cushions. For higher loads and velocities please refer to the Decel- Air Cushion.
In/Sec
6
12
18
24
30
36
42
48
54
60
11/2
155.6
38.4
16.7
9.2
5.6
3.7
2.6
1.8
1.3
1.0
2
275.5
68.1
29.7
16.3
10.0
6.7
4.6
3.2
2.4
1.8
21/2
499.8
123.4
53.7
29.4
18.1
11.9
8.2
5.8
4.2
3.0
31/4
969.3
239.7
104.6
57.3
35.4
23.5
16.3
11.7
8.5
6.2
4
1505.4
372.6
162.8
89.4
55.4
37.0
25.8
18.6
13.6
10.1
Cylinder Bore
5
2603.2
644.8
282.1
155.2
96.4
64.5
45.3
32.8
24.2
18.1
6
4159.8
1030.2
450.6
247.8
153.9
102.9
72.2
52.2
38.5
28.7
7
5794.2
1435.8
628.7
346.2
215.4
144.4
101.6
73.8
54.7
41.1
8
8067.6
2000.4
876.8
483.6
301.6
202.7
143.1
104.4
77.9
58.9
10
12,242
3026
1319.3
722
445.5
295.3
204.8
146
105.7
76.9
12
20,139
4971
2162.1
1179
724
476.8
327.7
231
164.7
117.2
*The weight of the cylinder piston has been deducted from the figures shown above.
Note: The use of Viton Seals limits the absorption of the impact dampening seals by 50%.
11/2
279
68
30
16
10
6.7
4.7
3.4
2.3
1.8
6
12
18
24
30
36
42
48
54
60
2
495
122
53
29
18
12
8.3
5.7
4.3
3.2
21/2
899
221
95
52
32
21.6
14.7
10.4
7.6
5.4
31/4
1,744
430
187
102
63
42
29
21
15.3
11
Cylinder Bore
4
2,709
699
291
160
99
66
46
33
24
18
5
4,685
1,159
507
279
172
116
81
59
43
33
6
7,486
1,854
810
444
275
183
129
93
68
52
7
10,429
2,583
1,130
622
387
259
181
131
97
74
8
4,520
3,800
1,576
869
541
363
257
187
138
106
10
22,035
5,446
2,374
1,299
801
531
367
262
189
138
12
36,250
8,947
3,891
1,414
1,303
856
588
415
295
211
10
.36
.24
.15
.09
.04
0
12
.40
.26
.16
.10
.04
0
PSI
0
20
40
60
80
100
11/2
.14
.10
.07
.04
.02
0
2
.15
.10
.07
.04
.02
0
21/2
.17
.12
.08
.05
.02
0
31/4
.19
.14
.09
.05
.02
0
4
.22
.16
.10
.06
.03
0
Cylinder Bore
5
.25
.18
.12
.07
.03
0
6
.28
.20
.13
.07
.03
0
7
.32
.22
.14
.08
.04
0
8
.32
.22
.14
.08
.04
0
Note: These figures are for new cylinders. The impact dampening seals will take some compression set during operation
of the cylinder and the stroke loss will decrease. Also, the pressure at zero stroke loss will decrease to about 80 psi.
At pressures above those of zero stroke loss, a slight clicking sound may be produced during impact.
To determine the stroke loss for either the head or cap end, divide the value shown by 2.
ACT-9
ACTUATORS
Norgren Guarantees
Non-lubricated Operation
for a Full Year!
As the piston continues its travel to the point of impact with the
end caps, the compressive qualities of the EJ seal provide the
final decelerating force. This action compresses the EJ seal and
absorbs the remaining kinetic shock vibration and noise
created by the impact.
Operating Temperatures:
Lubrication:
Side Loading:
Series J
None required
Norgren Air Cylinders are rated for no lube
added service. All internal components are
lubricated at time of assembly with a Teflon
based grease.
-20F to 200F
(-29C to 107C)
-20F to 400F
(-29C to 204C)
Operating Pressure:
ACTUATORS
Supply:
Filtered compressed air to 250 PSI Petroleum
based hydraulic fluid to 400 PSI
Materials:
Head and End Caps: precision
machined steel
Tube: 6063-T832 aluminum, clear
anodized O.D., hard coat anodized I.D.
Rod: hard chrome plated steel
Piston: machined high-strength
aluminum alloy
Rod Bearing: oil impregnated sintered iron
Seals: nitrile rod seal, urethane rod wiper,
nitrile piston seals, nitrile tube
end seals
Tie Rods: high-tensile strength steel
an average application and will help you in
selecting the proper cylinder model and size for
your particular application.
Ultra Cushion
A Major Design and Performance Breakthrough
in Air Cylinder Cushioning Systems!
Norgrens advanced cushion design features a unique, onepiece, nitrile compound seal that is captured within a
precision machined groove. This allows both linear and radial
float of the cushion seal which virtually eliminates problems
associated with misalignment. Integral flow paths molded in
the periphery of the seal provide exceptionally fast out of
cushion stroke reversal without the use of ball checks.
ACT-10
Figure 1
www.norgren.com/info/US-ACT-10
COMPETITIVE CYLINDERS
with Adjustable Cushions
Acceleration: 1
div. = 10 Gs
X Axis: 1 div. =
.03 seconds
Acceleration: 1
div. = 10 Gs
X Axis: 1 div. =
.03 seconds
Acceleration: 1
div. = 10 Gs
X Axis: 1 div. =
.03 seconds
Velocity: 1 div.
= 20 in/sec.
14.5 lbs. added
to rod
Velocity: 1 div.
= 20 in/sec.
2.5 lbs.
added to rod
Velocity: 1 div.
= 20 in/sec.
14.5 lbs. added
to rod
Acceleration: 1
div. = 10 Gs
X Axis: 1 div. =
.03 seconds
Acceleration: 1
div. = 10 Gs
X Axis: 1 div. =
.03 seconds
Acceleration:
1 div. = 10 Gs
X Axis: 1 div. =
.02 seconds
Velocity: 1 div.
= 20 in/sec.
14.5 lbs.
added to rod
Velocity: 1 div.
= 20 in/sec.
2.5 lbs. added
to rod
Velocity: 1 div.
= 20 in/sec.
14.5 lbs. added
to rod
Figures shown are average and not the result of each individual test. Piston velocity was
regulated at 45 in/sec.
Figures shown are average and not the result of each individual test. Piston velocity was
regulated at 25 in/sec.
Cylinders with
Cushions
Norgren Ecology
Adjustable
8.5
14.50
25.00
Cylinders with
Cushions
1.00
Norgren Ecology
Adjustable
54
5.25
40.00
3.25
54
12.00
28.75
2.75
Norgren Ecology
Non-Adjustable
8.5
17.50
26.25
1.75
Norgren Ecology
Non-Adjustable
Competitor A
Adjustable
8.5
48.00
107.50
7.25
Competitor A
Adjustable
54
11.50
92.50
6.75
54
8.00
77.50
5.25
54
6.50
67.50
6.25
Competitor B
Adjustable
8.5
32.75
102.50
6.50
Competitor B
Adjustable
Competitor C
Adjustable
8.5
50.50
81.25
9.25
Competitor C
Adjustable
*Measured in Gs of deceleration force created. All cylinders tested were NFPA types, front
flange mounting, 6" stroke with standard diameter piston rods.
*Measured in Gs of deceleration force created. All cylinders tested were NFPA types, front
flange mounting, 6" stroke with standard diameter piston rods.
ACT-11
ACTUATORS
Impact Dampening
Ecology Piston Seals
absorb final impact and
provide end of stroke
cushioning assistance.
ACTUATORS
ACT-12
www.norgren.com/info/US-ACT-12
2
990
244
106
58
36
24
16.6
11.4
8.6
2-1/2
1.798
442
190
104
64
43
29
20.8
10.8
3-1/4
3.488
860
374
204
126
84
58
42
30
Cylinder Bore
4
5
6
5.418 9.370 14.972
1.338 2.318 3.708
582
1.014 1.620
320
558
888
198
344
550
132
232
366
92
162
258
66
118
186
48
86
136
7
20.040
5.166
2.260
1.244
774
518
362
262
194
8
20.858
7.600
3.152
1.738
1.082
726
514
374
276
10
12
44.070 72.500
10.892 17.894
4.748 7.782
2.598 2.828
1.602 2.606
1.062 1.712
734
1.176
524
830
378
590
ACTUATORS
In/
Sec
6
12
18
24
30
36
42
48
54
MB + Stroke
NOTE:
All dimensions not shown are per STD NFPA dimensions
For cylinders with (1) Decel Cushion AOL dimension wil be MB-J.
Cyl.
Bore
1-1/2
2
2-1/2
3-1/4
4
5
6
7
8
G
1-1/2
1-1/2
1-1/2
1-3/4
1-3/4
1-3/4
2
2
2
J
1
1
1
1-1/4
1-1/4
1-1/4
1-1/2
1-1/2
1-1/2
Add Stroke
MB
5-5/8
5-5/8
5-3/4
6-3/4
6-3/4
7
8
8-1/8
8-1/8
ACT-13
EJ 01
ACTUATORS
Series
Series A Cylinder (Aluminum)
Series A Double Rod End Cylinder
Series EA Cylinder
Series EA Double Rod End Cylinder
Series J Cylinder (Steel)
Series J Double Rod End Cylinder
Series EJ Cylinder
Series EJ Double Rod End Cylinder
A
DA
EA
EDA
J
DJ
EJ
EDJ
Mounting Options
Side Tapped (MS4)
Head Rectangular Flange (MF1)
Head Square (ME3) 7" & 8" Bores
Cap Rectangular Flange (MF2)
Cap Square (ME4) 7" & 8" Bores
Basic Cylinder No Mounting (MX0
Both Ends (4) Tie Rods Ext. (MX1)
Both Ends (2) Tie Rods Ext. (MX4)
Cap Tie Rods Ext. (MX2)
Head Tie Rods Ext. (MX3)
Removable Head Trunnion (MT1) - A & EA
Head Trunnion (MT1) - J & EJ
Removable Cap Trunnion (MT2) - A & EA
Cap Trunnion (MT2) - J & EJ
Side Lugs (MS2)
Center Trunnion (MT4)
Side End Angles (MS1)
Cap Fixed Clevis (MP1)
Side End Lugs (MS7)
Sleeve Nut Construction (Universal)
Head Square Flange (MF5)
Cap Square Flange (MF6)
Detachable Cap Clevis (MP2)
Cap Fixed Eye (MP3)
Detachable Cap Eye (MP4)
Spherical Bearing
Base Bar (Not NFPA A & EA Only)
01
03
03
04
04
05
06
6B
6C
6R
7R
07
8R
08
09
10
11
12
15
16
20
21
22
32
42
52
60
Cushion in Head
None
Non-Adjustable Cushion
Adjustable Cushion (Position 2)
Decel Cushion
3
5
7
9
2-1/2
3-1/4
3
5
7
9
rod
ltr.
A
B+
A
B
C+
A
B
C
D+
B
C
D
E
B
C
D
E
F
B
C
D
E
F
rod dia.
(mm)
5/8
1
5/8
1
1-3/8
5/8
1
1-3/8
1-3/4
1
1-3/8
1-3/4
2
1
1-3/8
1-3/4
2
2-1/2
1
1-3/8
1-3/4
2
2-1/2
Type
1
2
3
6
7
N(_ _)
*P(_)
PS
RS
RX
S
SS
SB
ST(_R)
T
TX
V
Cyl
bore
6
10
12
rod
ltr.
C
D
E
F
C
D
E
F
C
D
E
F
D
E
F
E
F
Dim ref
KK
CC
KK
FF
rod dia.
(mm)
1-3/8
1-3/4
2
2-1/2
1-3/8
1-3/4
2
2-1/2
1-3/8
1-3/4
2
2-1/2
1-3/4
2
2-1/2
2
2-1/2
Notes
+ Head cushion not availale on these bore and piston rod
combinations.
Additional rod sizes available upon request.
Dimensions for thread sizes available on following pages.
ACT-14
L(_ _)
LE
LF
A
MS
* 1-1/2", 2", 2-1/2" bore cylinders have 3/8" NPT Standard, 1/2" NPT oversize.
3-1/4", 4", 5" bore cylinders have 1/2" NPT Standard, 3/4" NPT oversize.
Cushion in Cap
None
Non-Adjustable Cushion
Adjustable Cushion (Position 2)
Decel Cushion
HR
www.norgren.com/info/US-ACT-14
ACTUATORS
Option
Code
A()
AA()
AN
AP
BL
EN**
EV( )
FG
H
HR
L( )
LD
LE
LF
MS
N( )
P()
PP
PN
PS
RS
RX()
S
SB
SC
SL
SR
SS
ST(C)
ST(R)
SV( )
T()
TF()
TS
TX()
UB*
UC*
UH*
V
XI()
Standard available for 11/2", 2", 2-1/2" bores, 12" max stroke. (Stroke length doubles 24" max); 12 lbs. force preload, 30 lbs. force compressed.
Cushions not available on spring end. For other spring forces, bore sizes or longer strokes, consult factory.
*UA Unit Air Assembly
** When ordering EN option specify S, SS, TS, and SB options.
Description
Airsaver stroke adjustment
Cylinders mounted back to back
Close tolerance on cylinder stroke
Low friction cylinder (Pak-LapTM style seals)
Nituff coated cylinder
No silicone used in cylinder assembly
Zero stroke/pneulectric stroke signal valve(s)
Zero stroke/stroke signal valve(s)
Rod boot over piston rod
Nituff coated cylinder tubing
Thrust key plate mounting [01 (MS4), 09 (MS2), and 15 (MS7)
Valve mounting only
ACT-15
EE NPT (2)
P + Stroke
B Bushing
MM
KK
Thds
A
D
(Flats)
R
E Sq.
B
CC
Thds.
MM
ACTUATORS
D
Across
Flats
Bore
Rod Std.
MM O.S.
Std.
A
O.S.
B +.000 Std.
-.002 O.S.
C
Std.
O.S.
CC
Std.
O.S.
D
Std.
O.S.
E
EE
FF
Std.
O.S.
G
J
K
KK
Std.
O.S.
LB
P
R
VF
Std.
O.S.
Y
Std.
O.S.
ZB
Std.
O.S.
1-1/2"
5/8"
1"
.750
1.125
1.124
1.499
.375
.500
1/2 20
7/8 14
.500
.813
2.000
.375
5/8-18
1 14
1.500
1.000
.250
7/16 20
3/4 16
3.625
2.340
1.428
.625
.875
1.840
2.220
4.875
5.250
C
VF
B
KK
Thds.
A Deep
MM
A
B
FF
Thds.
MM
MM
MM
A
A
C
VF
ZB + Stroke
B
CC
Thds.
MM
A
J
LB + Stroke
VF
B
KK
Thds.
B
KK
Thds.
C
VF
C
VF
C
VF
VF
Type 1 Solid
Type 1 Studded
Type 2 Studded
Type 2 Solid
Type 3 Female
Type 6 Solid
(Small Male)
(Intermediate Thread
Male Optional)
(Intermediate Thread
Male Optional)
(Optional)
(Full Thread
Male Optional)
2"
5/8"
1"
.750
1.125
1.124
1.499
.375
.500
1/2 20
7/8 14
.500
.813
2.500
.375
5/8-18
1 14
1.500
1.000
.313
7/16 20
3/4 16
3.625
2.340
1.838
.625
.875
1.840
2.220
4.938
5.313
2-1/2"
5/8"
1"
.750
1.125
1.124
1.499
.375
.500
1/2 20
7/8 14
.500
.813
3.000
.375
5/8-18
1 14
1.500
1.000
.313
7/16 20
3/4 16
3.750
2.470
2.192
.625
.875
1.840
2.220
5.063
5.438
3-1/4"
1"
1-3/8"
1.125
1.625
1.499
1.999
.500
.625
7/8 14
1-1/4-12
.813
1.125
3.750
.500
1 14
1-3/8-12
1.750
1.250
.375
3/4 16
1 14
4.250
2.690
2.758
.875
1.000
2.380
2.630
6.000
6.250
4"
1"
1-3/8"
1.125
1.625
1.499
V 1.999
.500
.625
7/8 14
1-1/4-12
.813
1.125
4.500
.500
1 14
1-3/8-12
1.750
1.250
.375
3/4 16
1 14
4.250
2.690
3.323
.875
1.000
2.380
2.630
6.000
6.250
5"
1"
1-3/8"
1.125
1.625
1.499
1.999
.500
.625
7/8 14
1-1/4-12
.813
1.125
5.500
.500
1 14
1-3/8-12
1.750
1.250
.438
3/4 16
1 14
4.500
2.940
4.101
.875
1.000
2.380
2.630
6.313
6.563
6"
1-3/8"
1-3/4"
1.625
2.000
1.999
2.374
.625
.750
1-1/4-12
1-1/2-12
1.125
1.500
6.500
.750
1-3/8-12
1-3/4-12
2.000
1.500
.438
1 14
1-1/4 12
5.000
3.125
4.87
1.000
1.125
2.813
3.063
7.063
7.313
7"
1-3/8"
1-3/4"
1.625
2.000
1.999
2.374
.625
.750
1-1/4-12
1-1/2-12
1.125
1.500
7.500
.750
1-3/8-12
1-3/4-12
2.000
1.500
.563
1 14
1-1/4 12
5.125
3.250
5.730
1.000
1.125
2.813
3.063
7.313
7.563
8"
1-3/8"
1-3/4"
1.625
2.000
1.999
2.374
.625
.750
1-1/4-12
1-1/2-12
1.125
1.500
8.500
.750
1-3/8-12
1-3/4-12
2.000
1.500
.563
1 14
1-1/4 12
5.125
3.250
6.442
1.000
1.125
2.813
3.063
7.313
7.563
10"
1-3/4"
2"
2.000
2.250
2.374
2.624
.750
.875
1-1/2-12
1-3/4-12
1.500
1.688
10.625
1.000
1-3/4-12
2-12
2.250
2.000
.688
1-1/4 12
1-1/2 12
6.375
4.125
8.004
1.125
1.125
3.125
3.250
8.938
9.063
12"
2"
2-1/2"
2.250
3.000
2.624
3.124
.875
1.000
1-3/4-12
2-1/4-12
1.688
2.063
12.750
1.000
2-12
2-1/2-12
2.250
2.000
.688
1-1/2 12
1-7/8 12
6.875
4.625
9.4069
1.125
1.250
3.250
3.500
9.563
9.813
10"
1.500
18
4.125
5.500
3.125
3.250
12"
1.500
18
4.625
7.250
3.250
3.500
TN
Bore
ND
NT
SN
TN
XT
Std.
O.S.
1-1/2"
.375
1/4 20
2.250
.625
1.938
2.313
2"
.375
5/16 18
2.250
.875
1.938
2.313
2-1/2"
.500
3/8 16
2.375
1.250
1.938
2.313
3-1/4"
.750
1/2 13
2.625
1.500
2.438
2.688
4"
.750
1/2 13
2.625
2.063
2.438
2.688
NT Tap
ND Deep
5"
.938
5/8 11
2.875
2.688
2.438
2.688
SN + Stroke
XT
6"
1.125
3/4 10
3.125
3.250
2.813
3.063
7"
1.125
3/4 10
3.250
3.500
2.813
3.063
8"
1.125
3/4 10
3.250
4.500
2.813
3.063
ACT-16
www.norgren.com/info/US-ACT-16
FB Holes (4)
FB Holes (4)
E R
E R
TF
F
ZF + Stroke
UF
Bore
E
F
FB
R
TF
UF
W Std.
O.S.
1-1/2"
2.000
.375
.313
1.428
2.750
3.375
.625
1.000
2"
2.500
.375
.375
1.838
3.375
4.125
.625
1.000
2-1/2"
3.000
.375
.375
2.192
3.875
4.625
.625
1.000
3-1/4"
3.750
.625
.438
2.758
4.688
5.500
.750
1.000
4"
4.500
.625
.438
3.323
5.438
6.250
.750
1.000
5"
5.500
.625
.563
4.101
6.625
7.625
.750
1.000
6"
6.500
.750
.563
4.879
7.625
8.625
.875
1.125
Bore
E
F
R
TF
UF
ZF Std.
O.S.
1-1/2"
2.000
.375
1.428
2.750
3.375
5.000
5.375
2"
2.500
.375
1.838
3.375
4.125
5.000
5.375
2-1/2"
3.000
.375
2.192
3.875
4.625
5.125
5.500
TF
UF
3-1/4"
3.750
.625
2.758
4.687
5.500
6.250
6.500
4"
4.500
.625
3.323
5.438
6.250
6.250
6.500
5"
5.500
.625
4.101
6.625
7.625
6.500
6.750
6"
6.500
.750
4.879
7.625
8.625
7.375
7.625
EB Holes (4)
TE sq.
R sq.
Bore
E
EB
R
TE
7"
7.500
.563
5.730
6.750
8"
8.500
.688
6.442
7.570
10"
10.625
.813
8.004
9.406
E sq.
12"
12.750
.813
9.406
11.109
Bore
E
EB
R
TE
7"
7.500
.563
5.730
6.750
8"
8.500
.688
6.442
7.570
10"
10.625
.813
8.004
9.406
DD
Thds
06 (MX1)
F
AA
VF
ZB + Stroke
BB
6R (MX3)
BB
ZB + Stroke
DD
F
K
R
VF
ZB
Std.
O.S.
Std.
O.S.
Std.
O.S.
2"
2.600
1.125
.375
.500
5/16 24
.375
.313
1.838
.625
.875
4.938
5.313
2-1/2"
3.100
1.125
.375
.500
5/16 24
.375
.313
2.192
.625
.875
5.063
5.438
3-1/4"
3.900
1.375
.500
.625
3/8 24
.625
.375
2.758
.875
1.000
6.000
6.250
4"
4.700
1.375
.500
.625
3/8 24
.625
.375
3.323
.875
1.000
6.000
6.250
BB
6C (MX2)
1-1/2"
2.020
1.000
.375
.500
1/4 28
.375
.250
1.428
.625
.875
4.875
5.250
12"
12.750
.813
9.406
11.109
Bore
AA
BB
C
ACTUATORS
R sq.
E sq.
6B (MX4)
BB
DD
Thds.
5"
5.800
1.813
.500
.625
1/2 20
.625
.438
4.101
.875
1.000
6.313
6.563
DD
Thds.
6"
6.900
1.813
.625
.750
1/2 20
.750
.438
4.879
1.000
1.125
7.063
7.313
ZB + Stroke
7"
8.100
2.313
.625
.625
5/8 18
.563
5.730
1.000
1.125
7.313
7.563
DD
Thds.
8"
9.100
2.313
.625
.750
5/8 18
.563
6.442
1.000
1.125
7.313
7.563
ZB + Stroke
10"
11.313
2.688
.750
.875
3/4 16
.688
8.004
1.125
1.125
8.938
9.063
BB
12"
13.313
2.688
.875
1.000
3/4 16
.688
9.406
1.125
1.250
9.563
9.813
ACT-17
TL
TL
XG
UT
Bore
TD +.000 -.001
TL
UT
XG
Std.
O.S.
1-1/2"
1.000
1.000
4.000
1.750
2.125
2"
1.000
1.000
4.500
1.750
2.125
2-1/2"
1.000
1.000
5.000
1.750
2.125
3-1/4"
1.000
1.000
5.750
2.250
2.500
4"
1.000
1.000
6.500
2.250
2.500
5"
1.000
1.000
7.500
2.250
2.500
6"
1.375
1.375
9.250
2.625
2.875
7"
1.375
1.375
10.250
2.625
2.875
8"
1.375
1.375
11.250
2.625
2.875
10"
1.750
1.750
14.125
3.000
3.125
12"
1.750
1.750
16.250
3.125
3.375
TL
ACTUATORS
Bore
TD +.000 -.001
TL
UT
XJ
Std.
O.S.
1-1/2"
1.000
1.000
4.000
4.125
4.500
2"
1.000
1.000
4.500
4.125
4.500
2-1/2"
1.000
1.000
5.000
4.250
4.625
3-1/4"
1.000
1.000
5.750
5.000
5.250
4"
1.000
1.000
6.500
5.000
5.250
5"
1.000
1.000
7.500
5.250
5.500
6"
1.375
1.375
9.250
5.875
6.125
TL
UT
XJ + Stroke
7"
1.375
1.375
10.250
6.000
6.250
8"
1.375
1.375
11.250
6.000
6.250
10"
1.750
1.750
14.125
7.250
7.375
12"
1.750
1.750
16.250
7.875
8.125
Bore
G
J
SB
SH
SJ
SS
ST
SU
SW
TS
US
XS
Std.
O.S.
1-1/2"
1.500
1.000
.438
1.000
.625
2.875
.500
1.125
.375
2.750
3.500
1.375
1.750
2"
1.500
1.000
.438
1.250
.625
2.875
.500
1.125
.375
3.250
4.000
1.375
1.750
2-1/2"
1.500
1.000
.438
1.500
.625
3.000
.500
1.125
.375
3.750
4.500
1.375
1.750
3-1/4"
1.750
1.250
.563
1.875
.750
3.250
.750
1.250
.500
4.750
5.750
1.875
2.125
4"
1.750
1.250
.563
2.250
.750
3.250
.750
1.250
.500
5.500
6.500
1.875
2.125
5"
1.750
1.250
.813
2.750
.813
3.125
1.000
1.063
.688
6.875
8.250
2.062
2.313
SW
J
SJ
SU
6"
2.000
1.500
.813
3.250A
.813
3.625
1.000
1.313
.688
7.875
9.250
2.313
2.562
7"
2.000
1.500
.813
3.750
.813
3.750
1.000
1.563
.688
8.875
10.250
2.313
2.563
8"
2.000
1.500
.813
4.250
.813
3.750
1.000
1.563
.688
9.875
11.250
2.313
2.563
10"
2.250
2.000
1.063
5.313
2.000
4.625
1.250
2.000
.875
12.375
14.125
2.750
2.875
ACT-18
SW
SS + Stroke
XS
www.norgren.com/info/US-ACT-18
12"
2.250
2.000
1.063
6.375
2.000
5.125
1.250
2.000
.875
14.500
16.250
2.875
3.125
TL
Customer
Must Specify
XI
TL
TM
UM
Bore
BD
TD +.000
TL
TM
UM
UV
XI min.
-.001
Std.
O.S.
1-1/2"
1.250
1.000
1.000
2.500
4.500
2.500
3.125
3.500
2"
1.500
1.000
1.000
3.000
5.000
3.000
3.250
3.625
2-1/2"
1.500
1.000
1.000
3.500
5.500
3.500
3.250
3.625
3-1/4"
2.000
1.000
1.000
4.500
6.500
4.250
4.125
4.375
4"
2.000
1.000
1.000
5.250
7.250
5.000
4.125
4.375
5"
2.000
1.000
1.000
6.250
8.250
6.000
4.125
4.375
6"
2.500
1.375
1.375
7.625
10.375
7.000
4.625
4.875
BD
XI (Min.)
7"
2.500
1.375
1.375
8.750
11.500
8.500
4.875
5.125
8"
2.500
1.375
1.375
9.750
12.500
9.500
4.875
5.125
10"
3.000
1.750
1.750
12.000
15.500
11.750
5.625
5.750
12"
3.000
1.750
1.750
14.000
17.500
13.750
5.750
6.000
AH
AT
AB
AL
LB + Stroke
NF
AO
SA + Stroke
Bore
AB
AH
AL
AO
AT
LB
NF
S
SA
WF
STD.
O.S.
1-1/2"
.438
1.188
1.000
.375
.125
3.625
1.375
1.250
6.000
1.000
1.375
2"
.438
1.438
1.000
.375
.125
3.625
1.375
1.750
6.000
1.000
1.375
2-1/2"
.438
1.625
1.000
.375
.125
3.750
1.375
2.250
6.125
1.000
1.375
3-1/4"
.563
1.938
1.250
.500
.125
4.250
1.875
2.750
7.375
1.375
1.625
4"
.563
2.250
1.250
.500
.125
4.250
1.875
3.500
7.375
1.375
1.625
5"
.688
2.750
1.375
.625
.187
4.500
2.000
4.250
7.875
1.375
1.625
6"
.813
3.250
1.375
.625
.187
5.000
2.125
5.250
8.500
1.625
1.875
7"
.813
3.750
1.813
.688
.250
5.125
1.813
6.125
8.750
1.625
1.875
8"
.813
4.250
1.813
.688
.250
5.125
1.813
7.125
8.750
1.625
1.875
10"
1.063
5.313
2.125
.875
.250
6.375
1.813
8.875
10.625
1.875
2.000
12"
1.063
6.375
2.125
.875
.250
6.875
1.813
11.000
11.125
2.000
2.250
LR
Standard pin
included
CD
MR
LB + Stroke
CB
CW
CW
XC + Stroke
Bore
CB
CD
CW
L
LB
LR
MR
XC
Std.
O.S.
1-1/2"
.750
.500
.500
.750
3.625
.750
.625
5.375
5.750
2"
.750
.500
.500
.750
3.625
.750
.625
5.375
5.750
2-1/2"
.750
.500
.500
.750
3.750
.750
.625
5.500
5.875
3-1/4"
1.250
.750
.625
1.250
4.250
1.250
.938
6.875
7.125
4"
1.250
.750
.625
1.250
4.250
1.250
.938
6.875
7.125
5"
1.250
.750
.625
1.250
4.500
1.250
.938
7.125
7.375
6"
1.500
1.000
.750
1.500
5.000
1.500
1.188
8.125
8.375
7"
1.500
1.000
.750
1.500
5.125
1.500
1.188
8.250
8.500
8"
1.500
1.000
.750
1.500
5.125
1.500
1.188
8.250
8.500
10"
2.000
1.375
1.000
2.125
6.375
1.875
1.625
10.375
10.500
12"
2.500
1.750
1.250
2.250
6.875
2.125
2.125
11.125
11.375
ACT-19
ACTUATORS
WF
EB Hole (4)
ET
EO
EF
EL
ZE + Stroke
EO
TN
SE + Stroke
Bore
EB
EF
EL
EO
ET
R
SE
ZE Std.
O.S.
1-1/2"
.313
1.125
.750
.250
.500
1.428
5.500
5.625
6.000
2"
.375
1.313
.938
.313
.750
1.838
5.875
5.875
6.250
2-1/2"
.375
1.438
1.063
.313
.750
2.192
6.250
6.125
6.500
3-1/4"
.438
1.500
.875
.375
1.000
2.758
6.625
6.875
7.125
4"
.438
1.625
1.000
.375
1.250
3.323
6.875
7.000
7.250
5"
.563
1.688
1.063
.500
1.500
4.101
7.250
7.438
7.688
6"
.563
1.750
1.000
.500
1.500
4.879
7.750
8.125
8.375
7"
.688
1.750
1.125
.625
1.750
5.730
7.375
8.500
8.750
8"
.688
1.750
1.125
.625
2.063
6.442
7.375
8.500
8.750
ACTUATORS
Bore
DD
NT
ND
SN
TN
XT Std.
O.S.
1-1/2"
1/4-28
1/4 20
.375
2.250
.625
1.938
2.313
SN + Stroke
XT
NT Tap
ND Depth
2"
5/16-24
5/16 18
.375
2.250
.875
1.938
2.313
2-1/2"
5/16-24
3/8 16
.500
2.375
1.250
1.938
2.313
3-1/4"
3/8-24
1/2 13
.750
2.625
1.500
2.438
2.688
4"
3/8-24
1/2 13
.750
2.625
2.063
2.438
2.688
FB Holes (8)
Bore
F
FB
G
R
TF
UF
V Std.
O.S.
W Std.
O.S.
WF Std.
O.S.
1-1/2"
.375
.313
1.500
1.428
2.750
3.375
.250
.500
.625
1.000
1.000
1.375
2"
.375
.375
1.500
1.838
3.375
4.125
.250
.500
.625
1.000
1.000
1.375
2-1/2"
.375
.375
1.500
2.192
3.875
4.625
.250
.500
.625
1.000
1.000
1.375
UF TF
V
W F
WF
3-1/4"
.625
.438
1.750
2.758
4.688
5.500
.250
.375
.750
1.000
1.375
1.625
LB + Stroke
XF + Stroke
ZF + Stroke
4"
.625
.438
1.750
3.323
5.438
6.250
.250
.375
.750
1.000
1.375
1.625
5"
.625
.563
1.750
4.101
6.625
7.625
.250
.375
.750
1.000
1.375
1.625
Bore
F
FB
J
LB
R
TF
UF
XF Std.
O.S.
ZF Std.
O.S.
6"
.750
.563
2.000
4.879
7.625
8.625
.250
.375
.875
1.125
1.625
1.875
1-1/2"
.375
.313
1.000
3.625
1.428
2.750
3.375
4.625
5.000
5.000
5.375
2"
.375
.375
1.000
3.625
1.838
3.375
4.125
4.625
5.000
5.000
5.375
FB Holes (8)
2-1/2"
.375
.375
1.000
3.750
2.192
3.875
4.625
4.750
5.125
5.125
5.500
3-1/4"
.625
.438
1.250
A
4.250
2.758
4.688
5.500
5.625
5.875
6.250
6.500
4"
.625
.438
1.250
4.250
3.323
5.438
6.250
5.625
5.875
6.250
6.500
MR
FL
XD + Stroke
2-1/2"
.750
.500
.500
1.125
.750
.750
.500
.625
5.875
6.250
ACT-20
3-1/4"
1.250
.750
.625
1.875
1.250
1.250
.750
.938
7.500
7.750
4"
1.250
.750
.625
1.875
1.250
1.250
.750
.938
7.500
7.750
6"
.750
.563
1.500
5.000
4.879
7.625
8.625
6.625
6.875
7.375
7.625
CD
MR
2"
.750
.500
.500
1.125
.750
.750
.500
.625
5.750
6.125
5"
.625
.563
1.250
4.500
4.101
6.625
7.625
5.875
6.125
6.500
6.750
LR
CD
1-1/2"
.750
.500
.500
1.125
.750
.750
.500
.625
5.750
6.125
Bore
CB
CD
CW
FL
L
LR
M
MR
XD Std.
O.S.
6"
1/2-20
3/4 10
1.125
3.125
3.250
2.813
3.063
TF UF
5"
1/2-20
5/8 11
.938
2.875
2.688
2.438
2.688
5"
1.250
.750
.625
1.875
1.250
1.250
.750
.938
7.750
8.000
L
M
CW
6"
1.500
1.000
.750
2.250
1.500
1.500
1.000
1.188
8.875
9.125
CB
7"
1.500
1.000
.750
2.250
1.500
1.500
1.000
1.188
9.000
9.250
FL
CW
8"
1.500
1.000
.750
2.250
1.500
1.500
1.000
1.188
9.000
9.250
CB
XD + Stroke
Bore
CB
CD
FL
L
LR
M
MR
XD Std.
O.S.
1-1/2"
.750
.500
1.125
.750
.750
.500
.625
5.750
6.125
2"
.750
.500
1.125
.750
.750
.500
.625
5.750
6.125
2-1/2"
.750
.500
1.125
.750
.750
.500
.625
5.875
6.250
3-1/4"
1.250
.750
1.875
1.250
1.250
.750
.938
7.500
7.750
4"
1.250
.750
1.875
1.250
1.250
.750
.938
7.500
7.750
5"
1.250
.750
1.875
1.250
1.250
.750
.938
7.750
8.000
6"
1.500
1.000
2.250
1.500
1.500
1.000
1.188
8.875
9.125
7"
1.500
1.000
2.250
1.500
1.500
1.000
1.188
9.000
9.250
www.norgren.com/info/US-ACT-20
8"
1.500
1.000
2.250
1.500
1.500
1.000
1.188
9.000
9.250
LR
CD
MR
CB
XC + Stroke
Bore
CB
CD
L
LR
M
MR
XC
Std.
O.S.
1-1/2"
.750
.500
.750
.750
.500
.625
5.375
5.750
2"
.750
.500
.750
.750
.500
.625
5.375
5.750
2-1/2"
.750
.500
.750
.750
.500
.625
5.500
5.875
3-1/4"
1.250
.750
1.250
1.250
.750
.938
6.875
7.125
4"
1.250
.750
1.250
1.250
.750
.938
6.875
7.125
5"
1.250
.750
1.250
1.250
.750
.938
7.125
7.375
6"
1.500
1.000
1.500
1.500
1.000
1.188
8.125
8.375
7"
1.500
1.000
1.500
1.500
1.000
1.188
8.250
8.500
8"
1.500
1.000
1.500
1.500
1.000
1.188
8.250
8.500
10"
2.000
1.375
2.125
1.875
1.375
1.625
10.375
10.500
12"
2.500
1.750
2.250
2.125
1.750
2.125
11.125
11.375
ST
AM
XC + Stroke
Bore
AM
BI
DC
FT
KL
XC Std.
O.S.
1-1/2"
.750
.438
.500
.625
.969
5.375
5.750
2"
.750
.438
.500
.625
.969
5.375
5.750
2-1/2"
.750
.438
.500
.625
.969
5.500
5.875
3-1/4"
1.000
.656
.750
1.000
1.406
6.875
7.125
4"
1.000
.656
.750
1.000
1.406
6.875
7.125
5"
1.000
.656
.750
1.000
1.406
7.125
7.375
BI
6"
1.250
.875
1.000
1.250
1.719
8.125
8.375
7"
1.250
.875
1.000
1.250
1.719
8.250
8.500
TS
US
SW
8"
1.250
.875
1.000
1.250
1.719
8.250
8.500
Bore
G
SH
SS
ST
SU
SW
TS
US
XS Std.
O.S.
1-1/2"
1.500
1.250
2.875
.250
1.125
.375
2.750
3.500
1.375
1.750
XS
2"
1.500
1.500
2.875
.250
1.125
.375
3.250
4.000
1.375
1.750
2-1/2"
1.500
1.875
3.000
.375
1.125
.375
3.750
4.500
1.375
1.750
3-1/4"
1.750
2.375
3.250
.500
1.250
.500
4.750
5.750
1.875
2.125
G
SU
SS + Stroke
4"
1.750
2.750
3.250
.500
1.250
.500
5.500
6.500
1.875
2.125
5"
1.750
3.500
3.125
.750
1.063
.688
6.875
8.250
2.063
2.313
6"
2.000
4.000
3.625
.750
1.313
.688
7.875
9.250
2.313
2.563
WF
LD + Stroke
ZL + Stroke
ZM + 2x Stroke
Bore
LD
WF
ZL
ZM
Std.
O.S.
Std.
O.S.
Std.
O.S.
1-1/2"
4.125
1.000
1.375
5.375
5.750
6.125
6.875
2"
4.125
1.000
1.375
5.438
5.813
6.125
6.875
2-1/2"
4.250
1.000
1.375
5.563
5.938
6.250
7.000
3-1/4"
4.750
1.375
1.625
6.500
6.750
7.500
8.000
4"
4.750
1.375
1.625
6.500
6.750
7.500
8.000
5"
5.000
1.375
1.625
6.813 D
7.063
7.750
8.250
6"
5.500
1.625
1.875
7.563
7.813
8.750
9.250
7"
5.625
1.625
1.875
7.813
8.125
8.875
9.375
8"
5.625
1.625
1.875
7.813
8.125
8.875
9.375
10"
6.625
1.875
2.000
10.375
10.625
9.250
9.375
12"
7.125
2.000
2.250
11.125
11.625
9.675
10.375
ACT-21
ACTUATORS
SH
KL
CB
ER Radius
CW
CW
W
H
CD
CE
a Clevis
Mounted
L
A
KK Thds.
CB
.750
.750
.750
1.250
1.250
1.500
2.000
2.000
2.500
2.500
2.500
2.500
3.000
3.000
CD
.500
.500
.500
.750
.750
1.000
1.375
1.375
1.750
1.750
2.000
2.000
2.500
3.000
CE
1.500
1.500
1.500
2.375
2.375
3.125
4.125
4.125
4.500
4.500
5.500
5.500
6.500
6.750
Zerk
Fitting
CH
1.000
1.000
1.000
1.250
1.250
1.500
2.000
2.000
2.375
2.375
2.937
2.937
3.500
3.875
CW
.500
.500
.500
.625
.625
.750
1.000
1.000
1.250
1.250
1.250
1.250
1.500
1.500
ER
.500
.500
.500
.750
.750
1.000
1.375
1.000
1.750
1.750
2.000
2.000
2.750
2.750
CW
CB
L
.750
.750
.750
1.250
1.250
1.500
2.125
2.125
2.250
2.250
2.500
2.500
3.000
3.250
CW
C
KK Thds.
KK
a
A
B
C
D
H
J
K
W
49220
49220A
1-1/2, 2 & 2-1/2
1/2 20
12
2.125
.500
1.063
1.313
.453
.750
.875
.625
49221
49221A
3-1/4, 4 & 5
3/4 16
14
2.875
.750
1.563
1.750
.593
1.000
1.125
.875
49222
49222A
6&8
1 14
14
4.125
1.000
2.125
2.750
1.000
1.500
1.625
1.375
DD
4 Places
CD
CD
L
E BA
ACTUATORS
CE
M Radius
CH
KK Thds.
CB
.500
.750
CD
.500
.750
CE
CH
CW
1.375 1.000 .250
1.750 1.500 .375
L
N
.750 .375
1.000 .500
KK Thds.
AF
KK
AF
H
KK
AF
H
52025
7/16 20
.688
.250
52092
1-3/8 12
2.063
.781
52026
1/2 20
.750
.313
52068
1-1/2 12
2.250
.844
52027
5/8 18
.938
.375
52082
1-3/4 12
2.625
.969
52010
3/4 16
1.125
.422
52070
1-7/8 12
2.938
1.031
CD
52029
7/8 14
1.313
.484
52093
2 12
3.125
1.094
CD
ER Radius
CD
52030
1 14
1.500
.547
52083
2-1/4 12
3.500
1.203
52085
1-1/4 12
1.875
.719
52075
2-1/2 12
3.875
1.453
CB
BA
E
F
FL
49021
49021A
1.625
.750
.500
.406
2.500
.375
1.125
.750
.500
49020
49020A
2.563
1.250
.750
.531
3.500
.625
1.875
1.250
.750
49019
49019A
3.250
1.500
1.000
.656
4.500
.750
2.250
1.500
1.000
ACT-22
KK
7/16 20
1/2 20
5/8 18
3/4 16
7/8 14
1 14
1-1/4 12
1-3/8 12
1-1/2 12
1-3/4 12
1-7/8 12
2 12
2-1/4 12
2-1/2 12
49017
49017A
4.937
2.500
1.750
.906
6.500
.875
3.125
2.250
1.750
CB
49018
49018A
5.750
2.500
2.000
1.026
7.500
1.000
3.500
2.500
2.000
DD
4 Places
LR Radius
CD
CD
E BA
CE
A
M
Radius
KK Thds.
Rod Eye
49015
49014
49091
49013
49092
49011
49010
49093
49009
49094
49007
49095
49062
49096
49016
49016A
3.813
2.000
1.375
.656
5.000
.875
3.000
2.125
1.375
A
.750
.750
.750
1.125
1.125
1.625
2.000
1.625
2.250
2.250
3.000
2.250
3.000
3.000
CB
.750
.750
1.250
1.250
1.250
1.500
2.000
2.000
2.500
2.500
2.500
2.500
3.000
3.000
CD
.500
.500
.750
.750
.750
1.000
1.375
1.375
1.750
1.750
2.000
2.000
2.500
3.000
CE
1.500
1.500
2.063
2.063
2.063
2.813
3.438
3.438
4.000
4.000
5.000
5.000
5.813
6.125
ER
.563
.563
.500
.938
.750
1.125
1.563
1.375
2.500
2.500
2.875
2.875
3.250
3.250
CB
BA
E
F
FL
49243
49244
49019
49016
49017 49018
49240A 49241A
1.438 1.844
.750
.750
.500
.500
.281
.344
2.000 2.500
.375
.375
1.125 1.125
.563
.563
.625
.625
49243A
2.938
1.250
.750
.469
3.750
.500
1.750
1.000
.875
49244A
3.563
1.250
.750
.469
4.500
.500
1.750
1.000
.875
49019A
3.250
1.500
1.000
.656
4.500
.750
2.250
1.500
1.000
49016A
3.813
2.000
1.375
.656
5.000
.875
3.000
2.125
1.375
49017A
4.950
2.500
1.750
.906
6.500
.875
3.125
2.250
1.750
49242A
2.188
.750
.500
.344
3.000
.375
1.125
.563
.625
www.norgren.com/info/US-ACT-22
49018A
5.730
2.500
2.000
1.062
7.500
1.000
3.500
2.500
2.000
MR
Radius
LR Radius
LR
Radius
CD
M
FL
E BA
CW
FL
49251
49251A
2.563
1.250
.750
.625
1/2 20
3.500
.625
1.875
1.250
.813
BA
E
CW
49252
49252A
3.250
1.500
1.000
.750
5/8 18
4.500
.750
2.250
1.500
1.000
R
E
DD
4 Places
CB
F
49250
49250A
1.625
.750
.500
.500
3/8 24
2.500
.375
1.125
.750
.500
CW
Pin Dia.
M Radius
CB
CW
CD
+ .001
49022
49022A
.750
.500
.500
.406
3.500
.500
1.500
.750
.500
.625
2.547
49023
49023A
1.250
.750
.625
.531
5.000
.625
1.875
1.188
.750
.906
3.828
49024
49024A
1.500
1.000
.750
.656
6.500
.750
2.250
1.500
1.000
1.250
4.953
49027
49027A
2.000
1.375
1.000
.656
8.000
.875
3.000
2.000
1.375
1.656
5.734
49025
49025A
2.500
1.750
1.250
.906
10.000
.875
3.625
2.750
1.750
2.219
7.500
49026
49026A
2.500
2.000
1.500
1.026
12.000
1.000
4.520
3.188
2.250
2.781
9.938
NFPA Pin
HP
Standard Pin
CD
NFPA Pin
CD.
LH
LP
D
49006-R
500
2.219
1.875
49005-R
.750
3.125
2.750
49004-R
1.000
3.750
3.250
49003
1.375
4.750
4.250
.173
49002
1.750
5.812
5.250
.173
49001
2.000
5.812
5.281
.204
49000
2.000
6.312
5.770
.204
LP
LH
49126
2.500
6.875
6.312
.219
49127
3.000
6.875
6.344
.250
Std. Pin
CD
HP
LH
LP
49207*
.500
.156
1.421
1.266
49208*
.750
.156
2.000
1.843
49206
.500
.156
2.250
2.093
49205
.750
.156
3.000
2.843
49204
1.000
.203
3.500
3.297
49203
1.375
.250
5.000
4.500
49202
1.750
.250
6.000
5.500
49201
2.000
.250
6.000
5.500
F Shank
G Across Flats
A Thds.
A Thds.
.062
Radial Float
2 Spherical
Motion
E
H Across
Flats
E
D
C
CC-1-07
7/16 20
1.250 (31.75)
2.000 (50.80)
.500 (12.70)
.750 (19.05)
.625 (28.58)
.500 (12.70)
1.125 (28.58)
10,000
CC-1-08
1/2 20
1.250 (31.75)
2.000 (50.80)
.500 (12.70)
.750 (19.05)
.625 (28.58)
.500 (12.70)
1.125 (28.58)
14,000
CC-1-10
5/8 18
1.250 (31.75)
2.000 (50.80)
.500 (12.70)
.750 (19.05)
.625 (28.58)
.500 (12.70)
1.125 (28.58)
19,000
CC-1-12
3/4 16
1.750 (44.45)
2.312 (58.72)
.500 (12.70)
1.125 (28.58)
.969 (24.61)
.812 (20.62)
1.500 (38.10)
34,000
CC-1-14
7/8 14
1.750 (44.45)
2.312 (58.72)
.500 (12.70)
1.125 (28.58)
.969 (24.61)
.812 (20.62)
1.500 (38.10)
39,000
CC-1-16
1 14
2.500 (63.50)
2.937 (74.60)
.500 (12.70)
1.625 (41.28)
1.375 (34.93)
1.156 (29.36)
2.250 (57.15)
64,000
CC-1-20
11/4 12
2.500 (63.50)
2.937 (74.60)
.500 (12.70)
1.625 (41.28)
1.375 (34.93)
1.156 (29.36)
2.250 (57.15)
78,000
CC-1-24
11/2 12
3.250 (82.50)
4.375 (111.13)
.812 (20.62)
2.250 (57.15)
1.750 (44.45)
1.500 (38.10)
3.000 (76.20)
134,000
CC-1-28
13/4 12
3.250 (82.50)
4.375 (111.13)
.812 (20.62)
2.250 (57.15)
1.750 (44.45)
1.500 (38.10)
3.000 (76.20)
134,000
ACT-23
ACTUATORS
CD
LP
LH
G
H
L NPT
Fill Port
J (4)
L NPT
Fill
Port
K NPT
Port
K NPT
Port
*C *B
*B *C *D
D
A
*plus internal length
A
B
C
D
E
F
G
H
J
K
L
1-1/8"
AOT-225
1.500 (38.10)
1.250 (31.75)
.750 (19.05)
.750 (19.05)
.125
.125
2"
AOT-04
2.687 (68.25)
2.000 (50.80)
4.000 (101.60)
4.750 (120.65)
.375
(9.53)
.125
(3.18)
2.500 (63.50)
1.750 (44.45)
.437 (11.10)
(3.18) .375
(9.53)
(3.18) .250
(6.35)
3-1/4"
AOT-065
4.000 (101.60)
2.500 (63.50)
5.000 (127.00)
6.000 (152.40)
.500 (12.70)
.187
(4.75)
3.750 (95.25)
2.750 (69.85)
.562 (14.27)
.500 (12.70)
.375
(9.53)
5"
AOT-10
5.625 (142.88)
2.500 (63.50)
5.250 (127.00)
6.500 (152.40)
.500 (12.70)
.187
(4.75)
5.500 (139.70)
4.25 (107.95)
.690 (17.53)
.500 (12.70)
.375
(9.53)
8
AOT-16
8.625 (219.08)
3.000 (76.20)
6.625 (168.28)
8.000 (203.20)
.687 (17.45)
.250
(6.35)
8.500 (215.90)
7.125 (180.98)
.812 (20.62)
.750 (19.05)
.500 (12.70)
ACTUATORS
Bore
Bore
Area
6"
8"
10"
12"
14"
16"
18"
20"
1-1/8"
.995 sq."
5.9
7.9
9.9
11.9
13.9
15.9
17.9
19.9
2"
3.14 sq."
18.6
25.1
31.4
37.6
43.9
50.2
56.5
62.8
3-1/4"
8.30 sq."
49.8
66.4
83.0
99.6
116.2
132.8
149.4
166.0
5"
19.64 sq."
117.8
157.1
196.4
235.6
274.9
314.2
353.5
392.8
8"
50.26 sq."
301.5
402.0
502.6
603.1
703.6
804.1
904.5
1005.2
How to Order: Specify air-oil tank part number and internal length.
Example: 2" bore with 6" internal length = AOT-04 x 6
Piston
Area
1.77
3.14
4.91
8.30
12.57
19.64
28.27
38.49
50.26
78.54
113.10
40
(11.40)
(20.27)
(31.67)
(53.32)
(81.07)
(126.71)
(182.39)
(247.91)
(324.26)
(506.74)
(729.72)
71
126
196
332
503
785
1130
1540
2010
3141
4524
(3)
60
(4)
80
(315)
(559)
(874)
(1477)
(2237)
(3491)
(5026)
(6831)
(8940)
(13974)
(20123)
106
189
295
498
754
1178
1696
2309
3015
4712
6786
(472)
(839)
(1311)
(2215)
(3355)
(5240)
(7544)
(10242)
(13411)
(20961)
(30184)
142
251
393
664
1005
1571
2262
3079
4020
6283
9048
PSI (bar)
(6)
(629)
(1119)
(1748)
(2953)
(4473)
(6988)
(10061)
(13658)
(17881)
(27948)
(40246)
100
(7)
150
(10)
177
314
491
830
1257
1964
2827
3849
5026
7854
11310
(786)
(1398)
(2185)
(3692)
(5592)
(8736)
(12574)
(17074)
(22356)
(34935)
(50307)
266
471
737
1245
1886
2946
4240
5774
7539
11781
16965
(1179)
(2097)
(3277)
(5538)
(8388)
(13104)
(18860)
(25613)
(33533)
(52402)
(75460)
200
353
628
982
1659
2513
3928
5654
7698
10052
15700
22620
(14)
(1570)
(2793)
(4368)
(7379)
(11178)
(17472)
(25149)
(34148)
(44711)
(69834)
(100614)
Volume
Cu Ft (cm3)
Displacement
Per Inch
.00102
.00182
.00284
.00480
.00727
.01137
.01636
.02227
.02909
.04545
.06545
(29)
(52)
(80)
(136)
(206)
(322)
(463)
(631)
(829)
(1282)
(1852)
Rod
5/8"
1"
1-3/8"
1-3/4"
2"
2-1/2"
Rod
Area
.307 (1.98)
.785 (5.06)
1.485 (9.58)
2.404 (15.51)
3.142 (20.16)
4.909 (31.67)
ACT-24
40
(3)
60
(4)
80
12
31
59
96
126
196
(53)
(138)
(262)
(423)
(559)
(873)
18
47
89
144
189
295
(80)
(209)
(396)
(641)
(839)
(1310)
25
63
119
192
251
393
(6)
PSI (bar)
100
(111)
(280)
(529)
(854)
(1118)
(1747)
31
78
149
240
314
491
(7)
150
(10)
(138)
(351)
(663)
(1068)
(1398)
(2184)
46
118
222
360
471
736
(205)
(525)
(997)
(1601)
(2096)
(3275)
200
61
157
297
480
628
981
(14)
(271)
(698)
(1321)
(2135)
(2795)
(4367)
Volume
Cu Ft (cm3)
Displacement
Per Inch
.00018
.00045
.00086
.00139
.00182
.00284
www.norgren.com/info/US-ACT-24
(5)
(13)
(24)
(39)
(52)
(80)
Stop Tube
Bore
J
1-1/2"
1
(38.10)
(25.40)
2"
1
(50.80)
(25.40)
ST(C)
ST(R)
Cap Stop Tube
ST(R)
Head Stop Tube
consisting of Spacer
Tube and Block
J
Stop Tube Length
2-1/2"
1
(63.50)
(25.40)
3-1/4" (82.55)
1.250 (31.75)
4" (101.60)
1.250 (31.75)
5"
(127.00)
1.250 (31.75)
6" (152.40)
1.500 (38.10)
7" (177.80)
1.500 (38.10)
8"
(203.20)
1.500 (38.10)
5/8"
95
65
50
43
34
25
20
17
13
11
9
7
170
135
260
115
220
93
180
300
70
135
250
56
110
185
250
48
94
160
220
38
80
130
170
33
64
110
140
26
51
90
115
22
44
75
100
20
39
66
88
18
35
60
79
15
30
52
68
12
26
46
60
10
22
41
52
19
37
48
14
29
41
2-1/2"
260
225
180
155
140
125
110
95
86
79
68
Note: In some cases it may be necessary to use a larger bore cylinder than is required for force in order to obtain an adequate rod diameter.
ACT-25
ACTUATORS
Rod End
Connection
Fixed and
Rigidly Guided
.50
Pivoted and
Rigidly Guided
.70
Supported but
not Rigidly Guided
2.00
None
5.00
Head Trunnion
Pivoted and
Rigidly Guided
1.00
Center Trunnion
Pivoted and
Rigidly Guided
1.50
Cap Trunnion
or Clevis
Pivoted and
Rigidly Guided
ACTUATORS
Mounting
Style
Stroke
Factor
2.00
60
1
ACT-26
75
1
1
135
3
2
1
1
1
Standard
Steel Tie Rods
6.6 ft. lbs.
11 ft. lbs.
13 ft. lbs.
20 ft. lbs.
24 ft. lbs.
40 ft. lbs.
48 ft. lbs.
100 ft. lbs.
150 ft. lbs.
175 ft. lbs.
Stainless Steel
Tie Rods
3.75 ft. lbs.
7.5 ft. lbs.
7.5 ft. lbs.
13-14 ft. lbs.
13-14 ft. lbs.
33 ft. lbs.
33 ft. lbs.
65 ft. lbs.
75 ft. lbs.
87.5 ft. lbs.
www.norgren.com/info/US-ACT-26
(50.80)
2-1/2" (63.50)
3-1/4" (82.55)
4"
(101.60)
5"
(127.00)
6"
(152.40)
7"
(177.80)
8"
(203.20)
Rod
Inch (mm)
5/8" (15.88)
5/8" (15.88)
1"
(25.40)
5/8" (15.88)
1"
(25.40)
1"
(25.40)
1-3/8" (34.93)
1"
(25.40)
1-3/8" (34.93)
1"
(25.40)
1-3/8" (34.93)
1-3/8" (34.93)
1-3/4" (44.45)
1-3/8" (34.93)
1-3/4" (44.45)
1-3/8" (34.93)
1-3/4" (44.45)
01, 05, 16
1.9
(.86)
2.8 (1.27)
3.4 (1.54)
3.9 (1.77)
4.5 (2.04)
7.3 (3.31)
8.2 (3.72)
9.8 (4.45)
10.8 (4.90)
15.1 (6.85)
16.2 (7.35)
23.5 (16.19)
24.8 (11.27)
32.1 (14.56)
33.4 (15.18)
40.0 (18.14)
47.3 (21.50)
03
2.6 (1.18)
3.9 (.77)
4.4 (2.00)
5.3 (2.40)
5.9 (2.68)
10.8 (4.90)
11.5 (5.22)
14.8 (6.71)
15.5 (7.03)
22.7 (10.30)
23.5 (10.66)
35.6 (16.15)
36.9 (16.77)
32.1 (14.56)
33.4 (15.18)
40.0 (18.14)
41.3 (18.77)
04
2.7
4.0
4.6
5.5
6.1
11.1
12.1
15.1
16.1
23.1
24.1
36.3
37.6
32.1
33.4
40.0
41.3
(.23)
(1.81)
(2.09)
(2.49)
(2.77)
(5.03)
(5.49)
(6.85)
(7.30)
(10.48)
(10.93)
(16.47)
(17.09)
(14.56)
(15.18)
(18.14)
(18.77)
2.1
3.1
3.7
4.1
4.7
7.7
8.7
10.2
11.2
16.1
17.2
24.5
25.8
33.4
34.7
41.3
42.6
06
(.95)
(1.41)
(1.68)
1.86)
(2.13)
(3.49)
(3.95)
(4.63)
(5.08)
(7.30)
(7.80)
(11.11)
(11.73)
(15.15)
(15.77)
(18.73)
(19.36)
Mounting Code
7R, 8R, 09, 60
2.5 (1.13)
3.5 (1.59)
4.1 (1.86)
4.6 (2.09)
5.2 (2.36)
8.9 (4.04)
9.9 (4.50)
11.5 (5.22)
12.5 (5.67)
18.7 (8.48)
19.7 (8.94)
27.3 (12.38)
28.3 (12.86)
33.5 (15.20)
34.8 (15.82)
41.4 (18.78)
42.7 (19.41)
11
2.3
3.3
3.9
4.4
5.1
8.2
9.2
10.9
11.9
17.6
18.6
26.6
27.9
36.8
38.1
45.7
47.0
(1.04)
(1.50)
(1.77)
(2.00)
(2.31)
(3.72)
(4.17)
(4.94)
(5.40)
(7.98)
(8.44)
(12.07)
(12.68)
(16.69)
(17.32)
(20.73)
(21.36)
12
2.8 (1.27)
4.0 (1.81)
4.6 (2.09)
5.3 (2.40)
5.9 (2.68)
11.1 (5.03)
12.1 (5.49)
14.8 (6.71)
15.8 (7.17)
22.2 (10.07)
23.2 (10.52)
35.7 (10.66)
37.0 (16.82)
35.2 (15.97)
36.5 (16.59)
43.0 (19.50)
44.3 (20.14)
15
2.5 (1.13)
3.8 (1.72)
4.4 (2.00)
5.3 (2.40)
6.0 (2.72)
9.7 (4.40)
10.7 (4.85)
13.3 (6.03)
14.3 (6.49)
20.8 (9.43)
21.9 (9.93)
32.1 (14.56)
33.4 (15.18)
32.1 (14.56)
33.4 (15.18)
40.0 (18.14)
41.3 (18.77)
Bore
Inch (mm)
1-1/2" (38.10)
2"
(50.80)
2-1/2" (63.50)
3-1/4" (82.55)
4"
(101.60)
5"
(127.00)
6"
(152.40)
7"
(177.80)
8"
(203.20)
10" (254.00)
12" (304.80)
Rod
Inch (mm)
5/8" (15.88)
5/8" (15.88)
1"
(25.40)
5/8" (15.88)
1"
(25.40)
1"
(25.40)
1-3/8" (34.93)
1"
(25.40)
1-3/8" (34.93)
1"
(25.40)
1-3/8" (34.93)
1-3/8" (34.93)
1-3/4" (44.45)
1-3/8" (34.93)
1-3/4" (44.45)
1-3/8" (34.93)
1-3/4" (44.45)
1-3/4" (44.45)
2"
(50.80)
2"
(50.80)
2-1/2" (63.50)
01, 05, 16
3.1 (1.42)
5.0 (2.27)
5.1 (2.33)
7.2 (3.26)
7.3 (3.32)
11.1 (5.02)
11.3 (5.11)
20.3 (9.22)
20.5 (9.31)
34.6 (15.72)
34.8 (15.81)
53.1 (24.09)
53.3 (24.21)
73.0 (33.14)
73.3 (33.26)
92.3 (41.88)
92.5 (42.00)
179.9 (81.66)
180.0 (81.72)
288.0 (130.75)
288.5 (130.98)
03
04
3.7 (1.67) 3.7 (1.67)
5.9 (2.67) 5.9 (2.67)
6.0 (2.73) 6.0 (2.73)
8.1 (3.68) 8.1 (3.68)
8.3 (3.75) 8.3 (3.75)
14.3 (6.50) 14.3 (6.50)
14.5 (6.59) 14.5 (6.59)
24.9 (11.29) 24.9 (11.29)
25.1 (11.38) 25.1 (11.38)
40.4 (18.33) 40.4 (18.33)
40.6 (18.42) 40.5 (18.42)
63.9 (29.02) 63.9 (29.02)
64.2 (31.41) 64.2 (31.41)
73.0 (33.14) 73.0 (33.14)
73.3 (33.26) 73.3 (33.26)
92.3 (41.88) 92.3 (41.88)
92.5 (42.00) 92.5 (42.00)
179.9 (81.66) 179.9 (81.66)
180.1 (81.76) 180.1 (81.76)
288.0 (130.75) 288.0 (130.75)
288.5 (130.98) 288.5 (130.98)
06
3.2 (1.48)
5.2 (2.35)
5.3 (2.42)
7.4 (3.35)
7.5 (3.41)
11.4 (5.16)
11.6 (5.25)
20.6 (9.36)
20.8 (9.45)
35.2 (15.97)
35.4 (16.06)
54.3 (24.66)
54.6 (24.78)
74.0 (33.60)
74.3 (33.71)
93.6 (42.50)
93.9 (42.62)
181.6 (82.46)
181.8 (82.55)
289.0 (131.21)
289.5 (131.43)
Mounting Code
07, 08, 09
11
12
3.8 (1.73) 4.9 (2.24) 3.9 (1.76)
5.7 (2.58) 7.6 (3.46) 5.8 (2.61)
5.8 (2.64) 7.8 (3.52) 5.9 (2.67)
7.9 (3.57) 10.3 (4.68) 7.9 (3.60)
8.0 (3.64) 10.5 (4.74) 8.1 (3.66)
11.7 (5.30) 16.8 (7.63) 12.6 (5.70)
11.9 (5.39) 17.0 (7.72) 12.8 (5.79)
20.8 (9.45) 27.4 (12.43) 21.8 (9.90)
21.0 (9.54) 27.6 (12.52) 22.0 (9.99)
38.0 (17.25) 43.2 (19.60) 36.3 (16.49)
38.2 (17.34) 43.4 (19.69) 36.5 (16.58)
56.4 (25.59) 65.3 (29.65) 57.1 (25.93)
56.7 (25.72) 65.6 (29.77) 57.4 (26.05)
76.5 (34.73) 96.0 (43.58) 85.0 (38.59)
76.8 (34.85) 96.3 (43.70) 85.3 (38.71)
95.8 (43.47) 120.0 (54.48) 97.8 (44.41)
96.0 (43.59) 120.3 (54.60) 98.1 (44.52)
184.3 (83.65) 228.0 (103.51) 186.1 (84.50)
184.5 (83.74) 228.2 (103.61) 186.3 (84.59)
293.0 (133.02) 380.0 (172.52) 297.0 (134.84)
293.5 (133.25) 380.5 (172.75) 297.5 (135.20)
73.3 (33.26)
96.3 (43.70) 2.01 (.91)
92.3 (41.88)
120.0 (54.48) 2.18 (.99)
92.5 (42.00)
120.3 (54.60) 2.44 (1.11)
179.9 (81.66)
228.0 (103.51) 3.43 (1.56)
180.1 (81.76)
228.2 (103.61) 3.64 (1.65)
288.0 (130.75)
380.0 (172.52) 4.12 (1.87)
288.5 (130.98)
380.5 (172.75) 4.62 (2.10)
Series J
Extend Retract
3-1/4", 4"
10"
12"
ACT-27
ACTUATORS
Unit-Air Assembly
ACTUATORS
Position-Air
Multi-Position Back-to-Back
ACT-28
www.norgren.com/info/US-ACT-28
11
1
9
8
10
NFPA MF1
NFPA MF2
NFPA MP1
NFPA MP2
ACT-29
ACTUATORS
Technical data
Medium:
Filtered compressed air
Operating temperature:
-25F to 140F (-5C to 60C)
With Viton Seals: -23F to 300F
(-5C to 150C)
Operating Pressure:
Minimum 7 psi (.5 bar)
Maximum 140 psi (9.7 bar)
Bore Sizes: 1-1/2", 2", 2-1/2",
3-1/4", 4"
Rod Diameter: 5/8" diameter
piston rod in 1-1/2", 2", 2-1/2"
bore
1" diameter piston rod in 3-1/4"
and 4" bore
Lubrication: None required
Norgren Air Cylinders are rated for
no lube added service.
Materials
Head and End Caps:
Die cast aluminum painted for
corrosion protection.
Tube: Aluminum alloy, hard coat
anodized
Piston: machined high-strength
aluminum casting.
Rod Bearing: clean metal teflon
composite
Seals: nitrile rod seal/wiper, nitrile
piston seals, nitrile tube end seals
Tie Rods: Nickel plated high-tensile
strength steel.
NEN
C x 4
E MP1 V
Series
NEN
Piston Rod Threads
Small Male (Solid) (std)
Intermediate Thread Male (Solid)
Female
Bore
1-1/2"
2.0"
2-1/2"
3-1/4"
4.0"
Additional Options
Viton Seals
Rod Extension
Non-standard piston rod thread
Piston Rod thread extension
Stainless steel piston rod
Stainless steel tie rods
1
2
3
Single rod
C
D
E
F
G
Mounting Options**
MS4 (standard)
Head Rectangular Flange
Cap Rectangular Flange
Detachable Cap Clevis
Cap Fixed Clevis
Tie Rod Extended both ends
Tie Rod Extended Cap
Tie Rod Extended Head
Side Lug Mount
48" max.*
ACTUATORS
V
RX
T
TX
S
SS
blank
MF1
MF2
MP2
MP1
MX1
MX2
MX3
MS2
Blank
C
E
G
J
M
P
S
1-1/2" Bore
Cylinder Stroke
Bore
1-1/2
1.00
1-1/2
2.00
1-1/2
3.00
1-1/2
4.00
1-1/2
5.00
1-1/2
6.00
1-1/2
8.00
1-1/2
10.00
1-1/2
12.00
1-1/2
14.00
1-1/2
16.00
1-1/2
18.00
1-1/2
20.00
24.00
2.0" Bore
Cylinder Stroke
Bore
2
1.00
2
2.00
2
3.00
2
4.00
2
5.00
2
6.00
2
8.00
2
10.00
2
12.00
2
14.00
2
16.00
2
18.00
2
20.00
2
24.00
Model
Number
NEN1D x 1
NEN1D x 2
NEN1D x 3
NEN1D x 4
NEN1D x 5
NEN1D x 6
NEN1D x 8
NEN1D x 10
NEN1D x 12
NEN1D x 14
NEN1D x 16
NEN1D x 18
NEN1D x 20
NEN1D x 24
Model
Number
NEN1E x 1
NEN1E x 2
NEN1E x 3
NEN1E x 4
NEN1E x 5
NEN1E x 6
NEN1E x 8
NEN1E x 10
NEN1E x 12
NEN1E x 14
NEN1E x 16
NEN1E x 18
NEN1E x 20
NEN1E x 24
2-1/2" Bore
Cylinder
Bore
2-1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
2 1/2
Stroke
1.00
2.00
3.00
4.00
5.00
6.00
8.00
10.00
12.00
14.00
16.00
18.00
20.00
24.00
Model
Number
NEN1F x 1
NEN1F x 2
NEN1F x 3
NEN1F x 4
NEN1F x 5
NEN1F x 6
NEN1F x 8
NEN1F x 10
NEN1F x 12
NEN1F x 14
NEN1F x 16
NEN1F x 18
NEN1F x 20
NEN1F x 24
3-1/4" Bore
Cylinder
Bore
3-1/4
3-1/4
3-1/4
3-1/4
3-1/4
3-1/4
3-1/4
3-1/4
3-1/4
3-1/4
3-1/4
3-1/4
3-1/4
3-1/4
Stroke
Model
Number
NEN1G x 1
NEN1G x 2
NEN1G x 3
NEN1G x 4
NEN1G x 5
NEN1G x 6
NEN1G x 8
NEN1G x 10
NEN1G x 12
NEN1G x 14
NEN1G x 16
NEN1G x 18
NEN1G x 20
NEN1G x 24
1.00
2.00
3.00
4.00
5.00
6.00
8.00
10.00
12.00
14.00
16.00
18.00
20.00
24.00
FB Holes (4)
E R
E R
TF
1-1/2"
2.000
.375
.313
1.428
2.750
3.375
.625
2"
2.500
.375
.375
1.838
3.375
4.125
.625
2-1/2"
3.000
.375
.375
2.192
3.875
4.625
.625
ACT-30
3-1/4"
3.750
.625
.438
2.758
4.688
5.500
.750
4"
4.500
.625
.438
3.323
5.438
6.250
.750
Bore
E
F
FB
R
TF
UF
ZF
1-1/2"
2.000
.375
.313
1.428
2.750
3.375
5.000
2"
2.500
.375
.375
1.838
3.375
4.125
5.000
TF
ZF + Stroke
UF
Bore
E
F
FB
R
TF
UF
W
4.0" Bore
Cylinder
Bore
4
4
4
4
4
4
4
4
4
4
4
4
4
4
UF
2-1/2"
3-1/4"
3.000
3.750
.375
.625
AC-04_MF2_CRF.eps
.375
.438
2.192
2.758
3.875
4.687
4.625
5.500
5.125
6.250
4"
4.500
.625
.438
3.323
5.438
6.250
6.250
www.norgren.com/info/US-ACT-30
Stroke
1.00
2.00
3.00
4.00
5.00
6.00
8.00
10.00
12.00
14.00
16.00
18.00
20.00
24.00
P + Stroke
WF
EE NPT (2)
B Bushing
MM
AA
DD Thds.
4 Places
Both Ends
KK
Thds
C
A
D
(Flats)
NT Tap
ND Depth
VF
TN
LB + Stroke
SN + Stroke
XT
R
E Sq.
ZJ + Stroke
B
CC
Thds.
MM
D
Across
Flats
Bore
Rod
A
AA
B
BA
C
CC
D
DD
E
EE
G
J
KK
LB
MM
NT
ND
P
R
SN
TN
VF
WF
XT
Y
ZJ
B
KK
Thds.
A Deep
MM
MM
A
C
Type 1 Solid
Type 2 Solid
Type 3 Female
(Small Male)
(Intermediate Thread
Male Optional)
(Optional)
1-1/2"
5/8"
0.750
2.020
1.124
1.125 (28.58)
0.375 (9.53)
1/2-20
0.562 (14.27)
1/4-28
2.000 (50.80)
3/8
1.260 (32.00)
1.010 (25.65)
7/16-20
3.625 (92.08)
0.625 (15.88)
1/4-20
0.281 (7.14)
2.360 (59.94)
1.430 (36.32)
2.250 (57.15)
0.625 (15.88)
0.625 (15.88)
1.000 (25.40)
1.938 (49.23)
1.710 (43.43)
4.750 (120.65)
2"
5/8"
0.750 (19.05)
2.600 (66.04)
1.124 (28.55)
1.125 (28.58)
0.375 (9.53)
1/2-20
0.562 (14.27)
5/16-24
2.500 (63.50)
3/8
1.260 (32.00)
1.060 (26.92)
7/16-20
3.625 (92.08)
0.625 (15.88)
5/16-18
0.438 (11.13)
2.400 (60.96)
1.840 (46.74)
2.250 (57.15)
0.875 (22.23)
0.625 (15.88)
1.000 (25.40)
1.938 (49.23)
1.710 (43.43)
4.750 (120.65)
2-1/2"
5/8"
0.750 (19.05)
3.100 (78.74)
1.124 (28.55)
1.125 (28.58)
0.375 (9.53)
1/2-20
0.562 (14.27)
5/16-24
3.000 (76.20)
3/8
1.300 (33.02)
1.060 (26.92)
7/16-20
3.750 (95.25)
0.625 (15.88)
3/8-16
0.593 (15.06)
2.480 (62.99)
2.190 (55.63)
2.375 (60.33)
1.250 (31.75)
0.625 (15.88)
1.000 (25.40)
1.938 (49.23)
1.750 (44.45)
4.870 (123.95)
3-1/4"
1"
1.125 (28.58)
3.900 (99.06)
1.500 (38.07)
1.250 (28.58)
0.500 (12.70)
7/8-14
0.875 (22.23)
3/8-24
3.750 (95.25)
1/2
1.570 (39.88)
1.180 (29.97)
3/4-16
4.250 (107.95)
1.000 (25.40)
1/2-13
0.625 (15.88)
2.720 (69.09)
2.760 (70.10)
2.625 (66.68)
1.500 (38.10)
0.875 (22.23)
1.375 (34.93)
2.438 (61.93)
2.340 (59.44)
5.820 (147.83)
4"
1"
1.125 (28.58)
4.700 (119.38)
1.499 (38.07)
1.250 (28.58)
0.500 (12.70)
7/8-14
0.875 (22.23)
3/8-24
4.500 (114.30)
1/2
1.570 (39.88)
1.180 (29.97)
3/4-16
4.250 (107.95)
1.000 (25.40)
1/2-13
0.625 (15.88)
2.720 (69.09)
3.320 (84.33)
2.625 (66.68)
2.063 (52.40)
0.875 (22.23)
1.375 (34.93)
2.438 (61.93)
2.340 (59.44)
5.820 (147.83)
ACT-31
ACTUATORS
B
KK
Thds.
22 (MP2)
MP1 Mount
LR
CD
MR
LB + Stroke
CB
CW
CW
XC + Stroke
22
Bore
CB
(MP2)
CD
CW
L
LB
LR
MR
XC
1-1/2"
0.750
0.500
0.500
0.750
3.625
0.625
0.625
5.375
2"
0.750
0.500
0.500
0.750
3.625
0.625
0.625
5.375
2-1/2"
0.750
0.500
0.500
0.750
3.750
0.625
0.625
5.500
3-1/4"
1.250
0.750
0.625
1.250
4.250
0.875
0.875
6.875
MP2 Mount
4"
1.250
0.750
0.625
1.250
4.250
0.875
0.875
6.875
Supplied with
Standard Pin
LR
ACTUATORS
CD
MR
L
FL
XD + Stroke
Bore
CB
CD
CW
FL
L
LR
M
MR
XD
1-1/2"
0.750
0.500
0.500
1.125
0.750
0.750
0.500
0.625
5.750
2"
0.750
0.500
0.500
1.125
0.750
0.750
0.500
0.625
5.750
2-1/2"
0.750
0.500
0.500
1.125
0.750
0.750
0.500
0.625
5.875
3-1/4"
1.250
0.750
0.625
1.875
1.250
1.250
0.875
0.875
7.500
CB
CW
CW
4"
1.250
0.750
0.625
1.875
1.250
1.250
0.750
0.875
7.500
AA
C
R
VF
BB
Bore
AA
BB
C
DD
K
R
VF
ZB
1-1/2"
2.020
1.000
0.375
1/4 28
0.250
1.428
0.625
4.875
ZB + Stroke
2"
2.600
1.125
0.375
5/16 24
0.313
1.838
0.625
4.938
2-1/2"
3.100
1.125
0.375
5/16 24
0.313
2.192
0.625
5.063
BB
3-1/4"
3.900
1.375
0.500
3/8 24
0.375
2.758
0.875
6.000
4"
4.700
1.375
0.500
3/8 24
0.375
3.323
0.875
6.000
ACT-32
www.norgren.com/info/US-ACT-32
MS2 Mount
SB thru Dia.
SC - C Bore
SD Deep
SH
ST
SU
SU
TS
US
SY
SL
SS + Stroke
XS
ZB + Stroke
1-1/2"
0.438
0.690
0.030
1.000
1.875
0.940
2.875
0.620
0.940
2.750
3.500
1.375
5.190
2"
0.438
0.690
0.030
1.250
1.875
0.940
2.875
0.620
0.940
3.250
4.000
1.375
5.190
2-1/2"
0.438
0.690
0.030
1.500
1.875
0.940
3.000
0.750
0.940
3.750
4.500
1.375
5.310
3-1/4"
0.563
0.800
0.030
1.875
2.500
1.250
3.250
1.000
1.250
4.750
5.750
1.875
6.380
4"
0.563
0.800
0.030
2.250
2.500
1.250
3.250
1.000
1.250
5.500
6.500
1.875
6.380
ACTUATORS
Bore
SB
SC
SD
SH
SL
SY
SS
ST
SU
TS
US
XS
ZB
CD
CD
ER Radius
CW
CB
ER Radius
CB
CW
CD
CD
CD
L
CE
CE
A
KK Thds.
Kit number
NENC-RC
NENF-RC
KK Thds.
CH Across
Hex Flats
KK
7/16-20
3/4-16
CB
0.750
1.250
CD.
0.500
0.750
CE
CH
1.500 1.000
2.375 1.250
CW
0.500
0.625
ER
0.500
0.750
L
0.750
1.250
Kit number
NENC-RE
NENF-RE
KK
7/16-20
3/4-16
A
0.750
1.125
CB
0.750
1.250
CD
CE
0.500 1.500
0.750 2.063
ER
0.563
0.875
RC and RE rod accessories come complete with pivot pin and retaining clips.
FB Holes (4)
E R
SL
ST
SU
SY
Kit number
MK-NENC-MS2
MK-NEND-MS2
MK-NENE-MS2
MK-NENF-MS2
MK-NENG-MS2
TF
TS
US
SB
0.41
0.41
0.41
0.52
0.52
SC
0.69
0.69
0.69
0.80
0.80
SD
0.03
0.03
0.03
0.03
0.03
SY
0.94
0.94
0.94
1.25
1.25
ST
0.62
0.62
0.75
1.00
1.00
UF
SU
0.94
0.94
0.94
1.25
1.25
TS
2.75
3.25
3.75
4.75
5.50
US
3.50
4.00
4.50
5.75
6.50
Kit number
MK-NENC-MF1
MK-NEND-MF1
MK-NENE-MF1
MK-NENF-MF1
MK-NENG-MF1
UF
3-3/8
4-1/8
4-5/8
5-1/2
6-1/4
TF
2-3/4
3-3/8
3-7/8
4-11/16
5-7/16
FB
5/16
3/8
3/8
7/16
7/16
E
2.00
2-1/2
3.00
3-3/4
4-1/2
R
1.43
1.84
2.19
2.76
3.32
F
3/8
3/8
3/8
5/8
5/8
ACT-33
EB (eye bracket)
DD
4 Places
D
G
LR Radius
CD
DD
LR
E BA
CD
M Radius
MR
CB
BA
FL
FL
NENC-EB
1.625
0.750
0.500
0.406
2.500
0.375
1.125
0.750
0.500
NENF-EB
2.563
1.250
0.750
0.531
3.500
0.625
1.875
1.250
0.750
Kit number
MK-NENC-MP1
MK-NEND-MP1
MK-NENE-MP1
MK-NENF-MP1
MK-NENG-MP1
CD
0.502
0.502
0.502
0.752
0.752
FL
0.75
0.75
0.75
1.25
1.25
CB
CW
F
0.38
0.38
0.38
0.63
0.63
B
0.76
0.76
0.76
1.26
1.26
CW
0.50
0.50
0.50
0.62
0.62
CW
D
2.00
2.50
3.00
3.75
4.50
MR
0.62
0.62
0.62
0.87
0.87
G
1.43
1.84
2.19
2.77
3.32
LR
0.62
0.62
0.62
0.87
0.87
MP1 and MP2 kits come complete with mounting hardware, pivot pin and retaining clips.
ACTUATORS
DD
DD
LR
CD
A
ER
F
FL
CB
CW
Kit number
MK-NENC-MP2
MK-NEND-MP2
MK-NENE-MP2
MK-NENF-MP2
MK-NENG-MP2
CD
0.502
0.502
0.502
0.752
0.752
FL
1.13
1.13
1.13
1.88
1.88
F
0.38
0.38
0.38
0.63
0.63
P (pin)
CW
B
0.76
0.76
0.76
1.26
1.26
CW
0.50
0.50
0.50
0.62
0.62
D
2.00
2.50
3.00
3.75
4.50
ER
0.62
0.62
0.62
0.87
0.87
G
1.43
1.84
2.19
2.77
3.32
DD
0.28
0.34
0.34
0.41
0.41
Kit number
MK-NENC-MX1
MK-NEND-MX1
MK-NENE-MX1
MK-NENF-MX1
MK-NENG-MX1
Kit number
MK-NENC-MX2
MK-NEND-MX2
MK-NENE-MX2
MK-NENF-MX2
MK-NENG-MX2
E
CD
LP
LH
NFPA Pin
CD
E
LH
LP
NEN-5
0.500
0.109
2.094
1.875
NEN-7
0.750
0.125
2.875
2.625
ACT-34
Kit number
MK-NENC-MX3
MK-NEND-MX3
MK-NENE-MX3
MK-NENF-MX3
MK-NENG-MX3
B
1.375
1.500
1.500
1.937
1.937
B
1.375
1.500
1.500
1.937
1.937
B
N/A
N/A
N/A
N/A
N/A
www.norgren.com/info/US-ACT-34
DD
0.28
0.34
0.34
0.41
0.41
Notes
If personal safety is required, an unrelated, redundant
safety system should be used.
Rod locks require clean, dry, pressure regulated air,
lubrication is not required.
The rod must be kept clean and dry to maintain optimum
holding forces.
Rod rotation is not allowed when rod lock is engaged
(not intended for torsional braking).
Bore
Size
1.500 in
2.000 in
2.500 in
3.250 in
4.000 in
5.000 in
6.000 in
Holding*
Force
180 lbs
314 lbs
491 lbs
830 lbs
1257 lbs
1960 lbs
2825 lbs
ACTUATORS
Rod
Diameter
0.625 in
0.625 in
0.625 in
1.000 in
1.000 in
1.000 in
1.375 in
(Dimensions in inches)
LE Option
LD Option
1/8-27 NPT
vent/breather
45
K c bore dia.
x
L depth
1/8 NPT
inlet port
A M
45
Manual release
5/16 torque screw
turn clockwise
A M
BC
BC
WF
VF
GG
F
K c bore dia.
x
L depth
VF
GG
F
LE Option
Bore
Dia.
1.50
2.00
2.50
3.25
4.00
5.00
6.00
BC
GG
VF
0.625
0.625
0.625
1.000
1.000
1.000
1.375
2.022
2.602
3.097
3.903
4.695
5.798
6.901
2.00
2.50
3.00
3.75
4.50
5.50
6.50
1.95
2.08
2.13
2.99
2.99
2.99
3.54
2.937
2.422
2.540
3.976
3.976
4.443
4.740
2.77
2.80
2.91
4.48
4.48
4.69
5.36
0.375
0.375
0.375
0.500
0.500
0.500
0.625
0.91
1.02
1.02
1.56
1.56
1.56
1.68
0.281
0.344
0.344
0.406
0.406
0.531
0.531
0.438
0.516
0.516
0.719
0.719
0.844
0.844
0.909
1.03
1.03
1.28
1.28
1.50
1.50
BC
GG
VF
0.625
0.625
0.625
1.000
1.000
1.000
1.375
2.022
2.602
3.097
3.903
4.695
5.798
6.901
2.00
2.50
3.00
3.75
4.50
5.50
6.50
1.01
1.00
1.04
1.37
1.69
1.50
1.87
2.625
2.875
2.875
4.500
4.875
5.375
6.375
3.00
3.25
3.38
5.00
5.37
5.87
7.13
0.375
0.375
0.500
0.500
0.500
0.500
0.750
1.91
1.980
2.12
2.99
3.15
3.38
3.67
0.281
0.344
0.344
0.406
0.406
0.531
0.531
0.438
0.516
0.516
0.719
0.719
0.844
0.844
0.909
1.03
1.03
1.28
1.28
1.50
1.50
WF
1.125
1.125
1.125
1.500
1.500
1.500
2.000
1.00
1.00
1.00
1.375
1.375
1.375
1.625
WF
1.125
1.125
1.125
1.500
1.500
1.500
2.000
2.405
2.535
2.529
3.869
4.25
4.655
5.21
1.00
1.00
1.00
1.375
1.375
1.375
1.625
-.001
-.003
LD Option
Bore
Dia.
1.5
2.0
2.5
3.25
4.0
5.0
6.0
-.001
-.003
ACT-35
Technical data
NFPA tie rod cylinder
Bore sizes: 1-1/2" and 2"
Operating pressure: 250 psi max.
Temperature range: -20F to 200F (-29C to 107C)
Porting: 3/8 NPT
Ecology piston seals available (fixed cushion, adjustable or extra
long Decel-Air" cushions)
Universal mounting (sleeve nut construction): Ease of cylinder
removal (modular)
ACTUATORS
Decel-Air" Cushions
Norgren's Decel cushioned cylinder was designed for
applications where high velocity, low mass, material function or
machine function is required, and where the kinetic energy to
be absorbed during cushioning exceeds the parameters of
standard cylinders equipped with Ecology piston seals and
fixed or adjustable cushions. Decel cushions employ longerthan-standard air cushions to assist our Impact Dampening
Piston Seal.
Velocity
In./Sec
6
12
18
24
30
1-1/2" Bore
Load (LBS.)
Load (LBS.)
Short Body
Long Body
Standard
Oversize
Standard
Oversize
Guide Shaft
Guide Shaft
Guide Shaft
Guide Shaft
151.3
149.1
150.8
148.2
34.1
31.9
33.6
31.0
12.4
10.2
11.9
9.3
4.9
2.7
4.44
1.8
1.3
0
0
0
2.0" Bore
Load (LBS.)
Load (LBS.)
Short Body
Long Body
Standard
Oversize
Standard
Oversize
Guide Shaft
Guide Shaft
Guide Shaft
Guide Shaft
267.0
261.9
265.7
259.4
59.6
54.5
58.3
52.0
7.8
16.1
20.0
13.6
7.8
2.7
6.5
0.2
1.5
0
0.2
0.0
*The weight of the cylinder piston has been deducted from the figures shown above.
Note: The use of Viton Seals limits the absorption of the impact dampening seals by 50%.
** Series J & EJ only
NOTE: The weight of a tooling plate, guide rods, and 1 extend and 1 retract stop collar has been added.
(Guide rod weight is basd on a 6.0" stroke cylinder.)
ACT-36
www.norgren.com/info/US-ACT-36
X
V
W
E
GG
A
F
C + stroke
D + stoke
N
M.001
HH
Y .001
P
S
L
Q
EE
WW
FF
F
HH
.125
G
J
K
JJ
TM4*
TM3*
TM1*
TM2*
*Dimensions apply to
TM option only
LS 3 A 3 3
S S C
6 7 8
2 3 4 5
1 - Product
LS
Linear slide unit
2 - Size
3
1-1/2"
4
2"
3 - Cylinder Type
A
aluminum (NFPA tie rod)
EA
aluminum (NFPA tie rod Ecology Seal
J
steel (NFPA tie rod)
EJ
steel (NFPA tie rod Ecology Seal
4- Cushions - Extend Stroke
3
non-cushioned*
5
fixed cushions
7
adjustable cushions**
9
decel adjustable cushions**
5 - Cushions - Retract Stroke
3
non-cushioned*
5
fixed cushions
7
adjustable cushions**
9
decel adjustable cushions**
A
AA
B
BD
C
BC
D
E
EE
F
FF
G
GG
H
HH
J
JJ
K
L
M
N (Standard)
N (Oversize)
P
Q
R
S
T
TM1*
TM2*
TM3*
TM4*
V
W
WW
X
Y
Z
ZZ
- Stroke - Options
Maximum Stroke
size 3 (1-1/2" bore) size 4 (2" bore)
short body
18"
22"
long body
24"
28"
Options
AE = stroke adjustment (collar & bumper) - extend stroke
AR = stroke adjustment (collar & bumper) - retract stroke
9 - Guide Rod Diameter
CR = corrosion resistance (includes linear slide and cylinder)
S
standard
GL = guide rod lubrication (includes oiler cups installed)
O
oversize
GM = guide rod lubrication modification for oiler cups
L() = non-standard port location
8 - Guide Rod Bearing Type
ME = shock absorber mounting block - extend stroke
C
composite
MR = shock absorber mounting block- retract stroke
R
Roller +, ++
N() = non-standard adjustable cushion needle location
P() = non-standard port size
7 - Slide Body Length
(down one size = 1/4 NPT, up one size = 1/2 NPT)
S
short
PS = magnetic piston (cylinder)
L
long
PX() = tooling plate extension
TM = side tapped mounting
6 - Slide Body Width
WC = linear thruster assembly without cylinder
S
standard
WS = replacement cylinder without slide
V = high temperature viton seals
* Non-cushioned cylinders will have U-cup seals as standard.
Ecology seals are not available as non-cushioned.
** Standard cushion adjustment location is side 1 and adds 1" to the
overall length of the cylinder per end with standard port sizes.
+ Roller bearings are not available with oversized guide rods.
++ Roller bearing not available with CR (corrosion resistance) option.
ACT-37
ACTUATORS
Dimensional data
ACTUATORS
1-1/2" bore, 3/4 inch guide rod, short body, roller bearing
ACT-38
www.norgren.com/info/US-ACT-38
ACTUATORS
1-1/2" bore, 3/4 inch guide rod, long body, composite bearing
ACT-39
ACTUATORS
2.0" bore, 1-3/8 inch guide rod, long body, composite bearing
ACT-40
www.norgren.com/info/US-ACT-40
ACTUATORS
2.0" bore, 1-3/8 inch guide rod, short body, composite bearing
ACT-41