Beruflich Dokumente
Kultur Dokumente
and PSpice
Phalguna P.
Dept. of EE,
IIT Bombay.
24 July 2016
Agenda
Build a resistive divider
Time domain analysis
Fourier analysis
Build an inverting amplifier
Time domain analysis
Build an active Low Pass Filter
Frequency domain analysis.
Bode Magnitude and phase plots.
Parametric sweep analysis
24 July 2016
24 July 2016
24 July 2016
Parameters of VPULSE
24 July 2016
24 July 2016
24 July 2016
24 July 2016
10
24 July 2016
11
24 July 2016
12
Fourier Analysis
Click on the Fourier button in the simulation window.
24 July 2016
13
Inverting amplifier
Add the following components:
uA741 OPAMP from EVAL library
Two VSRC from SOURCE library
Replace VPULSE with VSIN from the SOURCE library
Set the following component values:
R2 = 2K ohm.
VSIN: VOFF=0V, VAMP=5V, FREQ=1Hz, VAC=0V.
VSRC: VDC=12V, VAC=0V, TRAN=0V.
Add two ground points for VSRCs.
24 July 2016
14
15
Legends:
--- Vin
--- Vout
24 July 2016
16
24 July 2016
17
Frequency Analysis
Edit the simulation profile by clicking the edit button
as shown here:
24 July 2016
18
24 July 2016
19
24 July 2016
20
21
22
24 July 2016
23
Vin
R1
R1
1 jwR 2C
R2 / R1
1 ( wR2C )
24
Parametric Analysis
24 July 2016
25
Parametric Analysis
Edit the simulation profile.
Under the settings of AC sweep, click on Parametic
sweep, and make the following changes.
24 July 2016
26
Legends:
--- cap = 0.5 uF
--- cap = 1 uF
--- cap = 1.5 uF
---cap = 2 uF
24 July 2016
27
Thank you
24 July 2016
28