Beruflich Dokumente
Kultur Dokumente
aerospace
climate control
electromechanical
filtration
fluid & gas handling
hydraulics
pneumatics
process control
sealing & shielding
(Revised 5-19-2014)
Catalog 0700P-E
DISTRIBUTION NETWORK
At Parker, we have the largest global distribution
network in motion and control, with over 7,500
distributors serving more than 422,000 customers.
! WARNING
FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN
OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE.
This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide
product and/or system options for further investigation by users h aving technical expertise. It is important that you analyze all
aspects of your application including consequences of any failure, and review the information concerning the product or system
in the current product catalog. Due to the variety of operating conditions and applications for these products or systems, the
user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and
assuring that all performance, safety and warning requirements of the application are met.
The products described herein, including without limitation, product features, specifications, designs, availability and pricing,
are subject to change by Parker Hannifin Corporation and its subsidiaries at any time without notice.
Offer of Sale
The items described in this document are hereby offered for sale by Parker Hannifin Corporation, its subsidiaries or its
authorized distributors. This offer and its acceptance are governed by the provisions stated on the separate page of this
document entitled Offer of Sale.
Copyright 2010-2005 Parker Hannifin Corporation. All Rights Reserved
Catalog 0700P-E
Precision Regulators
www.parker.com/pneu/precreg
Proportional Regulators
LV / EZ Lockout Valves
(Lockout Valves)
www.parker.com/pneu/lockout
G
H
Integrated Fittings
www.parker.com/pneu/ball
Quick Couplings
Quick
Couplings
www.parker.com/pneu/accessories
Hose and
Fittings
Accessories
Global Air
Preparation
Systems
www.parker.com/pneu/ssfrls
Filters,
Regulators,
Lubricators
Stainless
Steel
FRLs
Precision
Regulators
www.parker.com/pneu/frl
Proportional
Regulators
LV / EZ
Lockout
Valves
Integrated
Fittings
www.parker.com/globalfrl
Accessories
Ball Valves /
Plug Valves
Introduction
Introduction
Index
P
1
Tubing and
Fittings
Model to
Page Number
Index
(Revised 5-19-2014)
Filters, Regulators,
Lubricators
Global Air Preparation System
Section B
Accessories
Lubricators
Filter /
Regulators
Regulators
Coalescers
Filters
Combos
www.parker.com/globalfrl
Introduction
Introduction......................................................... B2-B12
Combos............................................................ B14-B17
Filters................................................................ B18-B23
Coalescing & Adsorber Filters.......................... B24-B29
Regulators........................................................ B30-B39
Filter / Regulators............................................. B40-B45
Lubricators........................................................ B46-B51
Electronic Proportional Regulator.................... B52-B61
Combined Soft Start / Dump Valve.................. B62-B63
B1
Catalog 0700P-E
Global.
Modular.
Filters
Coalescers
Regulators
Filter /
Regulators
Lubricators
Accessories
B2
Catalog 0700P-E
Comprehensive Offering
Filters
Regulators
Filter / Regulators
Filter /
Regulators
Lubricators
Accessories
Regulators
Coalescers
1/4" ports
40mm body width
Filters
Combos
Introduction
Lubricators
Combinations
Accessories
Easily assembled
Manifold blocks
Shut-off valves (both slide
and ball type)
Repair kits, gauges, etc.
B3
Catalog 0700P-E
Fast cycle times, high product quality, and low downtime all require a clean, dry
pneumatic system to function properly. Parker has what it takes to make sure
pneumatic systems perform at their best.
Combos
Filters
Coalescers
Regulators
Filter /
Regulators
Stage
Lubricators
As air is compressed
to 7 bar (100 psig)
and higher, the relative
humidity quickly
reaches 100% RH and
air temperatures can
reach between
110C and 200C
(230F and 392F).
2
For every 11C (20F)
that the air cools
after leaving the heat
of the compressor,
50% of the moisture
condenses into liquid
into the system.
Accessories
3
Bulk liquid separators
remove condensed
liquids after the
aftercooler, receiver, or
anywhere within the
distribution system.
Bulk liquid separators
also help protect
downstream filters in
the system where
excess cooling takes
place.
Particulate
Oil
Water
Oil Vapor
Water Vapor
Key
B4
5
Coalescing filters are
designed to remove
water and oil aerosols
(not vapor) and
particulate from air
streams down to 0.01
micron in size.
Installed in pairs,
Particulate and
Coalescing filters
ensure a continuous
supply of high quality
air.
Catalog 0700P-E
Air Compressor
Bulk Liquid
Removal
Particulate
Filtration
Coalescing
Filtration
Application
All pneumatic
systems
Basic pneumatic
systems
Basic pneumatic
systems
Systems requiring
highest quality air.
Removes bulk
liquid contamination
and protects filters
where excess
cooling takes place
in the distribution
piping
Removes solid
particulates down to
5 micron, and
the separation of
bulk contaminants.
Removes liquid
aerosols and
submicron
particulates (not
vapor) down to
0.01 micron.
Removes water
vapor from air
stream. Dew point
reduced down to
4C (40F)
(refrigeration) or
-40C (-40F)
(desiccant).
Removal of odors
and trace vapors for
critical applications.
P3TF
Bulk Liquid
Separator
PDRD Refrigeration
Dryer
P3TJ
Regenerative
Desiccant Dryer
Description
Hydrocarbon
Removal
6
Refrigeration and
desiccant dryers lower
the air's dew point by
removing water vapor,
providing appropriately
dry air for the
downstream
application.
7
Hydrocarbon and oil
vapors are removed
using filters utilizing
activated carbon.
Airborne hydrocarbons
are often left over from
the compressor oils.
B5
Accessories
Clean
Dry Air
Lubricators
Filter /
Regulators
Customer
Parker
supplied
Global Air
Preparation
Solution
Air Dryers
Filters
Function
Combos
Coalescers
Regulators
1 2
Stages
Introduction
Catalog 0700P-E
A completely modular
air preparation system
B
Introduction
Combos
Filter /
Regulator
Ball Valve
Filters
Coalescers
Pressure
gauge
Regulators
Filter /
Regulators
Lubricators
Accessories
Padlock slide
Quick release
bayonet-type
integral bowl
and bowl guard
assembly
Bowl guard
with multiple
viewing slots
B6
Catalog 0700P-E
Introduction
Combos
Soft Start /
Dump Valve
B7
Aluminum
body
Accessories
Coalescing
Filter
NPT, BSPP or
BSPT porting
available
Lubricators
Filter /
Regulators
Regulators
Coalescers
Filters
2-piece Patented
modular body
connector US Patent
number 5,383,689
Catalog 0700P-E
Air Preparation
P31 Mini Series
B
Introduction
Combos
Filters
Coalescers
Regulators
Filter /
Regulators
Lubricators
Accessories
Catalog 0700P-E
Moduflex Size 1
Filters
Isys Micro
Combos
Introduction
P1A
Coalescers
P1D
Regulators
Isys HA / HB
P1D
OSP-P
Isys Size 1
Isys HA / HB
P1D
OSP-P
B9
Accessories
Lubricators
Isys Micro
Filter /
Regulators
OSP-P
Catalog 0700P-E
B
Introduction
P1
Combos
P1
P2
P3
Filters
Coalescers
Regulators
Filter /
Regulators
Electro-Pneumatic regulator
Integrated systems control
Accurate output pressure
Micro parameter settings
Selectable I/O parameters
Quick, full flow exhaust
LED display indicates output pressure
No air consumption in steady state
Multiple mounting options
Protection to IP65
Lubricators
Accessories
B10
P4
Catalog 0700P-E
Application Guide
FRL to Valve: The chart below contains recommendations for the correct selection of Global Air Preparation units to
suit the number and size of valves in a typical application.
P32 Compact Series
Introduction
10
11
12
13
14
15
16
Moduflex 1
Filters
Isys Micro
HB / Viking Xtreme
Actuator to FRL: The chart below contains recommendations for the correct selection of Global Air Preparation
units suitable for each cylinder size.If you have a tube length over 2 m, choose one tube size larger than the chart. The
table is based on a Maximum cylinder speed of 0.5m/s
Tube mm
Tube inches
10
(7/16)
16
(9/16)
20
(3/4)
25
(1)
4
(5/32)
4
(5/32)
4
(5/32)
6
(1/4)
6
(1/4)
28
32
40
45
(1-1/8) (1-1/4) (1-1/2) (1-3/4)
50
(2)
63
(2-1/2)
75
(3)
80
(3-1/4)
100
(4)
8
(5/16)
10
(3/8)
10
(3/8)
12
(1/2)
12
(1/2)
6
(1/4)
8
(5/16)
8
(5/16)
Accessories
1
2
Number of cylinders
actuating at once
Filter /
Regulators
Lubricators
HA / Global ISO
Regulators
Coalescers
Moduflex 2
Cyl mm
Cyl inches
Combos
3
4
5
6
7
8
9
10
P31 Mini Series
Note: Data listed above is simply a guideline for a typical application only. Proper sizing
and correct flow requirements must be taken into account.
B11
Catalog 0700P-E
Basic
Unit
Introduction
F
I
L
T
E
R
S
Combos
Filters
C
O
A
L
E
S
C
I
N
G
F
I
L
T
E
R
S
Coalescers
Basic
Unit
Regulators
S
T
A
N
D
A
R
D
Filter /
Regulators
Lubricators
R
E
G
U
L C
A O
T M
O M
R O
S N
P
I
L
O
T
Port Size
Series
Bowls
Accessories
R
E
G
U
L
A
T
O
R
F
I
L
T
E
R
L
U
B
R
I
C
A
T
O
R
S
Adsorber
Page
Std.
B18
Std.
B20
Std.
B22
Std.
Std.
Std.
B24
Std.
Std.
Std.
B26
Std.
Std.
Std.
B28
Poly with
Metal
Bowl Guard without SG
1/4
3/8
1/2
3/4
Metal SG
0.01
P31
P32
P33
P31
P32
P33
Port Size
Series
Adjustment Range
Page
1/4
3/8
1/2
3/4
30 psig 2 bar
60 psig 4 bar
P31
Std.
Std.
Std.
B30
P32
Std.
Std.
Std.
Std.
B34
P33
Std.
Std.
Std.
Std.
B38
P31
Std.
Std.
Std.
B32
P32
Std.
Std.
Std.
Std.
B36
Bowls
Elements
(Micron)
Poly with
Metal
Bowl
Metal SG
without SG
Guard
15
25
30
60
Port Size
Basic
Unit
Elements (Micron)
Series
Adjustment Range
Page
1/4
3/8
1/2
3/4
P31
Std.
Opt.
Opt.
Opt.
B40
P32
Std.
Opt.
Std.
B42
P33
Std.
Opt.
Opt.
B44
P31
B46
P32
B48
P33
B50
B12
Catalog 0700P-E
Accessories
Lubricators
Filter /
Regulators
Regulators
Coalescers
Filters
Combos
Introduction
B13
P31 Series
Combinations
Catalog 0700P-E
B
Introduction
Combos
Port
size
dm3/s
1/4"
13
Flow
(scfm)
Manual drain
Weight
Pulse drain
Weight
27
P31CB92GEMN5LNW
P31CB92GEBN5LNW
Filters
Coalescers
Regulators
Port
size
dm3/s
1/4"
14
Flow
(scfm)
Manual drain
Weight
Pulse drain
Weight
28
P31CA92GEMN5LNW
P31CA92GEBN5LNW
Filter /
Regulators
Lubricators
Filter coding
(use with combo codes:
B F G). For multiple filters,
repeat as needed
Regulator coding
(use with combo code: B)
Accessories
Lubricator coding
(use with combo
codes: A B)
Assembly
configuration
Lub type
Mounting
Oil mist
standard
L
sight dome
No bracket
Port blocks
C*
Port blocks
& wall brkt
D*
P31
Combination
Thread type
B/V + Combination Q
BSPP
5 Element
Combination + B/V
BSPT
Combination
NPT
0.01 Element C
Combination type*
Element
Port size
Relief / Adjustment
Non-rising knob
1 Element
Adsorber
Adjustment range
With round gauge
F/R+L
F+Fc+Fa
F+R+L
F/R+Fc
Drain type
F+Fc
F+Fc1+Fc
Manual drain
Pulse drain
* Combination type
F = 5
Fc1 = 1
Fc = .01
Fa = Adsorber
1/4
Bowl type
Poly bowl with bowl guard
2 bar; 30 psig;
0.2 MPa
4 bar; 60 psig;
0.4 MPa
Without gauge
B14
Drain type
Wall bracket W
No drain;
N
closed end
2 bar; 30 psig;
0.2 MPa
psig
bar
4 bar; 60 psig;
0.4 MPa
30* = 1
2* = V
60 = 3
4 = S
H 125 = 5
8 = T
P32 Series
Combinations
Catalog 0700P-E
Introduction
(scfm)
Manual drain
Weight
Auto drain
Weight
1/4"
20
42
P32CB92GEMNGLNW
P32CB92GEANGLNW
3/8"
32
68
P32CB93GEMNGLNW
P32CB93GEANGLNW
1/2"
40
85
P32CB94GEMNGLNW
P32CB94GEANGLNW
Filters
dm3/s
Combos
Flow
Port
size
Coalescers
Auto drain
Weight
45
P32CA92GEMNGLNW
P32CA92GEANGLNW
3/8"
33
70
P32CA93GEMNGLNW
P32CA93GEANGLNW
1/2"
43
90
P32CA94GEMNGLNW
P32CA94GEANGLNW
Regulator coding
(use with combo code: B)
Lubricator coding
(use with combo
codes: A B)
Assembly
configuration
P32
Thread type
Element
Relief / Adjustment
Lub type
Mounting
B/V + Combination
BSPP
0.01 Element C
BSPT
Port blocks
Combination
NPT
0.01 Element D*
with dpi
Oil mist
standard
L
sight dome
No bracket
Combination + B/V
Non-rising knob
relieving
Port blocks
& wall brkt
Combination
5 Element
F*
1 Element
1 Element
with dpi
Adsorber
F+Fc+Fa
1/4
F/R+Fc
3/8
F+Fc1+Fc
1/2
F/R+L
F+R+L
F+Fc
* Combination type
F = 5
Fc1 = 1
Fc = .01
Fa = Adsorber
Bowl type
Poly bowl with bowl guard
Adjustment range
5 Element
with dpi
Port size
Combination type*
Drain type
2 bar; 30 psig;
0.2 MPa
Q*
4 bar; 60 psig;
0.4 MPa
Without gauge
Drain type
Auto drain
Manual drain
B15
No drain;
N
closed end
2 bar; 30 psig;
0.2 MPa
psig
bar
4 bar; 60 psig;
0.4 MPa
30* = 1
2* = V
60 = 3
4 = S
125 = 5
8 = T
Wall bracket W
Filter /
Regulators
Manual drain
22
Lubricators
(scfm)
1/4"
Accessories
dm3/s
Regulators
Flow
Port
size
P33 Series
Combinations
Catalog 0700P-E
B
Introduction
Flow
Combos
Port
size
dm3/s
(scfm)
Manual drain
Weight
Auto drain
Weight
1/2"
43
90
P33CB94GEMNGLNW
P33CB94GEANGLNW
3/4"
52
110
P33CB96GEMNGLNW
P33CB96GEANGLNW
Filters
Coalescers
Regulators
Port
size
Flow
dm3/s
(scfm)
Manual drain
Weight
Auto drain
Weight
1/2"
52
110
P33CA94GEMNGLNW
P33CA94GEANGLNW
3/4"
71
150
P33CA96GEMNGLNW
P33CA96GEANGLNW
Filter /
Regulators
Lubricators
Filter coding
(use with combo codes:
B F G). For multiple filters,
repeat as needed
Regulator coding
(use with combo code: B)
Lubricator coding
(use with combo
codes: A B)
Assembly
configuration
P33
Accessories
Thread type
Combination
Element
Relief / Adjustment
Lub type
Mounting
B/V + Combination
BSPP
0.01 Element C
BSPT
Port blocks
Combination
NPT
0.01 Element D*
with dpi
Oil mist
standard
L
sight dome
No bracket
Combination + B/V
Non-rising knob
relieving
Port blocks
& wall brkt
Port size
Combination type*
5 Element
Adjustment range
Drain type
No drain;
N
closed end
F+Fc+Fa
1/2
5 Element
with dpi
F*
F/R+L
F+R+L
F/R+Fc
3/4
1 Element
F+Fc
F F+Fc1+Fc
Q
* Combination type
F = 5
Bowl type
Fc1 = 1
Fc = .01
Poly bowl with bowl guard
Fa = Adsorber
Metal bowl without sight gauge
1 Element
with dpi
Q*
Adsorber
G
M*
S
Wall bracket W
Drain type
Auto drain
Manual drain
B16
Catalog 0700P-E
40
(1.57)
96 Round
(3.78) Gauge
81 Square
(3.19) Gauge
39.7
(1.56)
120
(4.72)
40
(1.57)
40
(1.57)
35
(1.38)
35
(1.38)
4mm (5/32")
I.D. Tube
Barb fitting
4mm (5/32")
I.D. Tube
Barb fitting
33.3 Bowl
(1.31) Removal
Clearance
110.1 Round
(4.33) Gauge
98.1 Square
(3.86) Gauge
47.1
(1.85)
P32C
129
(5.08)
64.5
(2.54)
33 Bowl
(1.30) removal
clearance
110.1 Round
(4.33) Gauge
98.1 Square
(3.86) Gauge
47.1
(1.85)
198
(7.80)
69
(2.72)
Coalescers
64.5
(2.54)
159.7
(6.29)
Introduction
176.9
(6.96)
35
(1.38)
Combos
35
(1.38)
50
(1.97)
50
(1.97)
261.6
(10.30)
Regulators
100
(3.94)
4mm (5/32)
I.D. tube
barb fitting
Bowl
58 removal
(2.28) clearance.
(Manual and
Auto Drain.)
Filter /
Regulators
229.3
(9.03)
Bowl
58 removal
(2.28) clearance.
(Manual and
Auto Drain.)
Lubricators
100
(3.94)
120
(4.72)
47.1
(1.85)
237
(9.33)
77.5
(3.05)
77.5
(3.05)
50
(1.97)
120
(4.72)
82
(3.23)
47.1
(1.85)
50
(1.97)
100
(3.94)
100
(3.94)
291
(11.44)
4.8 mm (.19)
I.D. Tube
Barb fitting
Accessories
P33C
155
(6.10)
Bowl
removal
51 clearance.
(2.00) (Manual and
Auto Drain.)
238
(9.37)
4.8 mm (.19)
I.D. Tube
Barb fitting
B17
Filters
P31C
mm (inches)
96 Round
(3.78) Gauge
81 Square
(3.19) Gauge
39.7
(1.56)
Bowl
removal
51 clearance.
(2.00) (Manual and
Auto Drain.)
P31 Series
Mini Particulate Filters
Symbols
Catalog 0700P-E
Manual drain
Auto drain
Introduction
Combos
Filters
Options:
Coalescers
P31F
Regulators
Basic series
Engr level
Global modular
mini particulate filter
Current
P31F
9 2 E G M N
Thread type
BSPP
BSPT
NPT
Mounting
1
2
9
Drain type
M
B
Filter /
Regulators
Port size
1/4
Lubricators
Port
size
5 Element
Description
Manual drain
Pulse drain
Bowl type
Element
Bold items are most common.
No bracket
Order code
G
M
Flow
3
dm /s (scfm)
Max.
bar (psig)
Height
mm (inches)
Width
mm (inches)
Depth
mm (inches)
Accessories
1/4"
P31FA92EGMN
12 (25)
10 (150)
116.3 (4.58)
40 (1.58)
42.7 (1.68)
1/4"
P31FA92EGBN
12 (25)
10 (150)
116.3 (4.58)
40 (1.58)
42.7 (1.68)
1/4"
P31FA92EMMN
12 (25)
17 (250)
116.3 (4.58)
40 (1.58)
42.7 (1.68)
1/4"
P31FA92EMBN
12 (25)
17 (250)
116.3 (4.58)
40 (1.58)
42.7 (1.68)
Standard part numbers shown in bold. For other models refer to Options chart above.
Flow with 6.3 bar (91.3 psig) inlet pressure and 0.34 (4.9 psig) pressure drop.
B18
P31 Series
Mini Particulate Filters
Specifications
Flow Charts
Max. supply
pressure
Plastic bowl
Metal bowl
Standard filtration
5 micron
Useful retention
0.5
0.4
5
4
3
2
1
1/4
Weight
* Inlet pressure 6.3 bar (91.3 psig). Pressure drop 0.34 bar (4.9 psig).
Useful retention refers to volume below the quiet zone baffle.
1.6
23.2
4.0 6.3
58 91.4
10
145
0.3
0.2
0.1
0
10
Flow - dm3/s
10
20
Flow - (scfm)
15
30
20
40
Filters
Air quality:
Within ISO 8573-1: 1991 Class 3 (Particulates)
Within ISO 8573-1: 2001 Class 6 (Particulates)
ABS
Bowl
Polycarbonate
Bowl guard
Nylon
Element retainer
Acetal
Baffle
Acetal
Filter element
Sintered polyethylene
Seals
Nitrile
Dimensions mm (inches)
40
(1.58)
20
(.79)
40
(1.58)
21.4
(.84)
124.8
(4.91)
4mm (5/32)
I.D. tube
barb fitting
Manual Drain
Regulators
Body cap
Filter /
Regulators
Aluminum
Lubricators
Body
Coalescers
Material Specifications
P31KA00BGM
P31KA00BMM
P31KA00BGB
P31KA00BMB
P31KA00ESE
P31KA00MW
P31KA00MT
Body connector
P31KA00CB
Bowl
33 removal
(1.30) clearance
Pulse Drain
B19
Accessories
Port size
1/4 Filter
Introduction
Operating
temperature
1/4
Flow capacity*
Combos
Catalog 0700P-E
P32 Series
Compact Particulate Filters
Symbols
Catalog 0700P-E
Manual drain
Auto drain
Introduction
Combos
Filters
Options:
Coalescers
P32F
Regulators
Basic series
Engr level
Global modular
compact particulate filter
Current
P32F
9 2 E G M N
Thread type
BSPP
BSPT
NPT
Mounting
1
2
9
Drain type
M
A
Port size
Filter /
Regulators
1/4
3/8
1/2
2
3
4
Lubricators
5 Element
Accessories
Port
size
Description
Order code
Manual drain
Auto drain
Bowl type
G
M
S
Element
Bold items are most common.
No bracket
Flow
3
dm /s (scfm)
Max.
bar (psig)
Height
mm (inches)
Width
mm (inches)
Depth
mm (inches)
1/4"
P32FA92EGMN
18 (38)
10 (150)
188 (7.4)
60 (2.36)
60 (2.36)
1/4"
P32FA92EGAN
18 (38)
10 (150)
182 (7.2)
60 (2.36)
60 (2.36)
1/4"
P32FA92ESMN
18 (38)
17 (250)
188 (7.4)
60 (2.36)
60 (2.36)
1/4"
P32FA92ESAN
18 (38)
17 (250)
182 (7.2)
60 (2.36)
60 (2.36)
3/8"
P32FA93EGMN
30 (64)
10 (150)
188 (7.4)
60 (2.36)
60 (2.36)
3/8"
P32FA93EGAN
30 (64)
10 (150)
182 (7.2)
60 (2.36)
60 (2.36)
3/8"
P32FA93ESMN
30 (64)
17 (250)
188 (7.4)
60 (2.36)
60 (2.36)
3/8"
P32FA93ESAN
30 (64)
17 (250)
182 (7.2)
60 (2.36)
60 (2.36)
1/2"
P32FA94EGMN
38 (80)
10 (150)
188 (7.4)
60 (2.36)
60 (2.36)
1/2"
P32FA94EGAN
38 (80)
10 (150)
182 (7.2)
60 (2.36)
60 (2.36)
1/2"
P32FA94ESMN
38 (80)
17 (250)
188 (7.4)
60 (2.36)
60 (2.36)
1/2"
P32FA94ESAN
38 (80)
17 (250)
182 (7.2)
60 (2.36)
60 (2.36)
Standard part numbers shown in bold. For other models refer to Options chart above.
Flow with 6.3 bar (91.3 psig) inlet pressure and 0.34 (4.9 psig) pressure drop.
B20
P32 Series
Compact Particulate Filters
Specifications
Flow Charts
Port size
51
cm3
(1.7 US oz.)
* Inlet pressure 6.3 bar (91.3 psig). Pressure drop 0.34 bar (4.9 psig).
Useful retention refers to volume below the quiet zone baffle.
0.3
0.2
0.1
0
Weight
0
0
3/8 Filter
Air quality:
Within ISO 8573-1: 1991 Class 3 (Particulates)
Within ISO 8573-1: 2001 Class 6 (Particulates)
Material Specifications
0.5
0.4
5
4
3
2
1
Polycarbonate
Aluminum
Acetal
Filter element
Sintered polyethylene
Seals
Nitrile
Sight gauge
Metal bowl
Polycarbonate
0.5
0.4
5
4
3
2
1
0
26.3
(1.04)
190.3
(7.49)
4mm (5/32)
I.D. tube
barb fitting
Manual Drain
10
145
10
20
30
Flow - dm3/s
20
40
40
60
Flow - (scfm)
1.6
23.2
50
80
4.0
58
100
6.3
91.4
10
145
0.2
0.1
0
10
20
20
30
Flow - dm3/s
40
60
Flow - (scfm)
40
80
50
100
60
120
30
(1.18)
60
(2.36)
4.0 6.3
58 91.4
0.3
Dimensions mm (inches)
60
(2.36)
60
Filter /
Regulators
1/2 Filter
Polypropylene
Deflector
1.6
23.2
30
50
40
0.1
ABS
Nylon
30
Flow - (scfm)
0.2
Body cap
Bowl guard
20
Flow - dm3/s
20
0.3
Aluminum
Plastic bowl
Metal bowl
10
10
Body
Bowls
10
145
P32KA00BGM
P32KA00BSM
Auto drain
P32KA00DA
P32KA00ESE
P32KA00ML
P32KA00MB
P32KA00MT
Body connector
P32KA00CB
P32KA00RQ
Bowl
58 removal
(2.28) clearance
Automatic Drain
B21
Introduction
retention
Useful
5 micron
6.3
91.4
Filters
Standard filtration
4.0
58
Combos
0.4
1.6
23.2
Coalescers
Plastic bowl
Metal bowl
Regulators
Max. supply
pressure
0.5
Lubricators
7
Pressure Drop - bar
Operating
temperature
1/4 Filter
Accessories
Catalog 0700P-E
P33 Series
Standard Particulate Filters
Symbols
Catalog 0700P-E
Manual drain
Auto drain
Introduction
Combos
Filters
Options:
Coalescers
P33F A
Regulators
Basic series
Engr level
Global modular
standard particulate filter
Current
P33F
9 2 E G M N
Thread type
BSPP
BSPT
NPT
Mounting
1
2
9
Drain type
M
A
Port size
Filter /
Regulators
1/2
3/4
4
6
Lubricators
Accessories
Port
size
5 Element
Description
Order code
Manual drain
Auto drain
Bowl type
Element
Bold items are most common.
No bracket
G
M
S
Flow
3
dm /s (scfm)
Max.
bar (psig)
Height
mm (inches)
Width
mm (inches)
Depth
mm (inches)
1/2"
P33FA94EGMN
40 (85)
10 (150)
213 (8.4)
73 (2.9)
73 (2.9)
1/2"
P33FA94EGAN
40 (85)
10 (150)
207 (8.2)
73 (2.9)
73 (2.9)
1/2"
P33FA94ESMN
40 (85)
17 (250)
213 (8.4)
73 (2.9)
73 (2.9)
1/2"
P33FA94ESAN
40 (85)
17 (250)
207 (8.2)
73 (2.9)
73 (2.9)
3/4"
P33FA96EGMN
48 (102)
10 (150)
213 (8.4)
73 (2.9)
73 (2.9)
3/4"
P33FA96EGAN
48 (102)
10 (150)
207 (8.2)
73 (2.9)
73 (2.9)
3/4"
P33FA96ESMN
48 (102)
17 (250)
213 (8.4)
73 (2.9)
73 (2.9)
3/4"
P33FA96ESAN
48 (102)
17 (250)
207 (8.2)
73 (2.9)
73 (2.9)
Standard part numbers shown in bold. For other models refer to Options chart above.
Flow with 6.3 bar (91.3 psig) inlet pressure and 0.34 (4.9 psig) pressure drop.
B22
P33 Series
Standard Particulate Filters
Specifications
Flow Charts
5 micron
Useful retention
0.1
0
Aluminum
Body cap
ABS
20
Bowl guard
Nylon
Deflector
Polypropylene
Acetal
Filter element
Sintered polyethylene
0.5
0.4
5
4
3
2
1
Polycarbonate
Aluminum
Seals
20
30
40
Flow - dm3/s
40
60
80
Flow - (scfm)
1.6
23.2
50
100
4.0
58
60
70
120
140
10
145
6.3
91.4
0.3
0.2
0.1
10
20
20
40
30
40
50
Flow - dm3/s
60
80
100
Flow - (scfm)
70
60
120
140
80
160
Filter /
Regulators
Plastic bowl
Metal bowl
10
7
Pressure Drop - bar
Material Specifications
Body
3/4 Filter
Air quality:
Within ISO 8573-1: 1991 Class 3 (Particulates)
Within ISO 8573-1: 2001 Class 6 (Particulates)
Sight gauge
0.2
* Inlet pressure 6.3 bar (91.3 psig). Pressure drop 0.34 bar (4.9 psig).
Useful retention refers to volume below the quiet zone baffle.
0.3
1/2, 3/4
Weight
Bowls
Port size
10
145
Nitrile
Metal bowl
Polycarbonate
73
(2.87)
36
(1.42)
213
(8.39)
4mm (5/32)
I.D. tube
barb fitting
Manual Drain
Lubricators
Dimensions mm (inches)
73
(2.87)
Introduction
Standard filtration
6.3
91.4
Combos
0.4
4.0
58
Filters
Plastic bowl
Metal bowl
1.6
23.2
Coalescers
Max. supply
pressure
P33KA00BGM
P33KA00BSM
Auto drain
P32KA00DA
P33KA00ESE
P33KA00ML
P32KA00MB
P33KA00MT
Body connector
P32KA00CB
P32KA00RQ
Use 10mm
or 3/8 Flex
Tubing
Bowl removal
51 clearance
(2.00) (Manual &
Auto Drain)
Automatic Drain
B23
Accessories
0.5
Pressure Drop - bar
Operating
temperature
1/2 Filter
Regulators
Catalog 0700P-E
P31 Series
Mini Coalescing & Adsorber Filters
Symbol
Catalog 0700P-E
Introduction
Combos
Filters
Coalescers
Options:
P31F A
Regulators
Basic series
Engr level
Global modular
mini coalescing filter
Current
P31F
9 2 C G M N
Mounting
Thread type
A
Filter /
Regulators
BSPP
BSPT
NPT
1
2
9
Drain type
B
M
Port size
1/4
Lubricators
Accessories
Port
size
0.01 Element
0.01 Element with DPI
1 Element
1 Element with DPI
Adsorber
Description
Order code
Pulse drain)
Manual drain
Bowl type
Element
No bracket
C
D
9
Q
A
Flow
3
dm /s (scfm)
G
M
Max.
bar (psig)
Height
mm (inches)
Width
mm (inches)
Depth
mm (inches)
1/4"
P31FA92DGMN
2 (4.2)
10 (150)
116.3 (4.58)
40 (1.58)
42.7 (1.68)
1/4'
P31FA92DGBN
2 (4.2)
10 (150)
116.3 (4.58)
40 (1.58)
42.7 (1.68)
1/4"
P31FA92DMMN
2 (4.2)
17 (250)
116.3 (4.58)
40 (1.58)
42.7 (1.68)
1/4'
P31FA92DMBN
2 (4.2)
17 (250)
116.3 (4.58)
40 (1.58)
42.7 (1.68)
Standard part numbers shown in bold. For other models refer to Options chart above.
Flow with 6.3 bar (91.3 psig) inlet pressure and 0.2 (3 psig) pressure drop.
B24
P31 Series
Mini Coalescing & Adsorber Filters
Specifications
Flow Charts
Flow capacity
dm3/s scfm
1.0 micron coalescing
Energy efficient flow* 3.8
(8)
Maximum flow**
6
(13)
Plastic bowl
-10C to 52C (14F to 125F)
Metal bowl -10C to 65.5C (14F to 150F)
Max. supply
pressure
Plastic bowl
Metal bowl
4
3
2
1
0.2
** Inlet pressure 6.3 bar (91.3 psig), Pressure drop 0.4 bar (6 psig),
Saturated Element.
Useful retention refers to volume below the quiet zone baffle.
Material Specifications
Body
Aluminum
Body cap
ABS
10
Flow - (scfm)
7
15
0.5
0.4
5
4
3
2
1
0
Polycarbonate
Aluminum
4.0
58
6.3
91.4
0.3
0.2
Saturated
Element
Flow
0.1
2
3
Flow - dm3/s
5
Flow - (scfm)
5
10
Borosilicate cloth
Adsorber
Activated carbon
Seals
Nitrile
Lubricators
Filter element
4
5
Flow - dm3/s
* Inlet pressure 6.3 bar (91.3 psig), Pressure drop 0.2 bar (3 psig),
Saturated Element.
Plastic bowl
Metal bowl
1/4
Bowl
Weight
Filters
Port size
Useful retention
Saturated
Element
Flow
0.1
Adsorber
0.3
Coalescers
Standard filtration
0.4
Introduction
Operating
temperature
6.3
91.4
Combos
(13)
4.0
58
Dimensions mm (inches)
40
(1.58)
20
(.79)
40
(1.58)
124.8
(4.91)
4mm (5/32)
I.D. tube
barb fitting
Manual Drain
Bowl
33 removal
(1.30) clearance
Regulators
2.0
29
Filter /
Regulators
(4.2)
(8)
P31KA00BGM
P31KA00BMM
P31KA00BGB
P31KA00BMB
P31KA00ES9
P31KA00ESC
P31KA00ESA
P31KA00MW
P31KA00MT
Body connector
P31KA00CB
Pulse Drain
B25
Accessories
0.5
Pressure Drop - bar
Catalog 0700P-E
P32 Series
Compact Coalescing & Adsorber Filters
Symbol
Catalog 0700P-E
B
Introduction
Combos
Filters
Options:
Coalescers
P32F A
Regulators
Basic series
Engr level
Global modular
compact coalescing filter
Current
P32F
9 2 C G M N
Mounting
Thread type
A
BSPP
BSPT
NPT
1
2
9
Drain type
M
A
Port size
Filter /
Regulators
1/4
3/8
1/2
2
3
4
Lubricators
Accessories
0.01 Element
0.01 Element with DPI
1 Element
1 Element with DPI
Adsorber
Port
size
Description
Order code
Manual drain
Auto drain (P32, P33)
Bowl type
G
M
S
Element
No bracket
C
D
9
Q
A
Flow
3
dm /s (scfm)
Max.
bar (psig)
Height
mm (inches)
Width
mm (inches)
Depth
mm (inches)
P32FA92DGMN
11 (23)
10 (150)
209 (8.2)
60 (2.36)
60 (2.36)
1/4"
P32FA92DGAN
11 (23)
10 (150)
203 (8.0)
60 (2.36)
60 (2.36)
1/4"
P32FA92DSMN
11 (23)
17 (250)
209 (8.2)
60 (2.36)
60 (2.36)
1/4"
P32FA92DSAN
11 (23)
17 (250)
203 (8.0)
60 (2.36)
60 (2.36)
3/8"
P32FA93DGMN
11 (23)
10 (150)
209 (8.2)
60 (2.36)
60 (2.36)
3/8"
P32FA93DGAN
11 (23)
10 (150)
203 (8.0)
60 (2.36)
60 (2.36)
3/8"
P32FA93DSMN
11 (23)
17 (250)
209 (8.2)
60 (2.36)
60 (2.36)
1/4"
3/8'
P32FA93DSAN
11 (23)
17 (250)
203 (8.0)
60 (2.36)
60 (2.36)
1/2"
P32FA94DGMN
11 (23)
10 (150)
209 (8.2)
60 (2.36)
60 (2.36)
1/2"
P32FA94DGAN
11 (23)
10 (150)
203 (8.0)
60 (2.36)
60 (2.36)
1/2"
P32FA94DSMN
11 (23)
17 (250)
209 (8.2)
60 (2.36)
60 (2.36)
1/2"
P32FA94DSAN
11 (23)
17 (250)
203 (8.0)
60 (2.36)
60 (2.36)
Standard part numbers shown in bold. For other models refer to Options chart above.
Flow with 6.3 bar (91.3 psig) inlet pressure and 0.2 (3 psig) pressure drop.
B26
P32 Series
Compact Coalescing & Adsorber Filters
Specifications
Flow Charts
Max. supply
pressure
Plastic bowl
Metal bowl
0.3
0.2
Saturated
Element
Flow
0.1
0
10
10
15
20
Flow - dm3/s
20
30
40
Flow - (scfm)
Useful retention
Port size
* Inlet pressure 6.3 bar (91.3 psig), Pressure drop 0.2 bar (3 psig),
Saturated Element.
** Inlet pressure 6.3 bar (91.3 psig), Pressure drop 0.4 bar (6 psig),
Saturated Element.
Useful retention refers to volume below the quiet zone baffle.
0.5
0.4
5
4
3
2
1
50
60
35
70
Dimensions mm (inches)
2.0
29
4.0
58
6.3
91.4
0.3
0.2
Saturated
Element
Flow
0.1
10
10
15
Flow - dm3/s
20
30
Flow - (scfm)
20
40
25
50
Material Specifications
60
(2.36)
30
(1.18)
60
(2.36)
30
Weight
25
Adsorber
3
2
6.3
91.4
Filters
Standard filtration
4.0
58
48.3
(1.90)
Body
Aluminum
Body cap
ABS
Bowls
Plastic bowl
Metal bowl
Filter element
Borosilicate cloth
Polycarbonate
Aluminum
Adsorber
Activated carbon
Seals
Nitrile
Sight gauge
Metal bowl
Polycarbonate
4mm (5/32)
I.D. tube
barb fitting
Manual Drain
Bowl
58 removal
(2.28) clearance
Automatic Drain
Introduction
Operating
temperature
0.4
2.0
29
Combos
(57)
Coalescers
27
(23)
(38)
11
28
0.5
P32KA00BGM
P32KA00BSM
Auto drain
P32KA00DA
P32KA00ES9
P32KA00ESC
P32KA00ESA
P32KA00ML
P32KA00MB
P32KA00MT
Body connector
P32KA00CB
P32KA00RQ
B27
Regulators
Filter /
Regulators
Lubricators
dm3/s scfm
Energy efficient flow* 17
(36)
27
Maximum flow**
(57)
Flow capacity
1.0 micron coalescing
Accessories
(Revised 09-16-13)
Catalog 0700P-E
P33 Series
Standard Coalescing & Adsorber Filters
Symbol
Catalog 0700P-E
B
Introduction
Combos
Filters
Coalescers
Options:
P33F A
Regulators
Basic series
Engr level
Global modular
standard coalescing filter
Current
P33F
9 2 C G M N
Thread type
Filter /
Regulators
BSPP
BSPT
NPT
Mounting
1
2
9
Drain type
M
A
Port size
1/2
3/4
4
6
Lubricators
Accessories
0.01 Element
0.01 Element with DPI
1 Element
1 Element with DPI
Adsorber
Port
size
Description
Order code
Manual drain
Auto drain
Bowl type
Element
No bracket
C
D
9
Q
A
G
M
S
Flow
3
dm /s (scfm)
Max.
bar (psig)
Height
mm (inches)
Width
mm (inches)
Depth
mm (inches)
1/2"
P33FA94DGMN
20 (42)
10 (150)
235 (9.3)
73 (2.9)
73 (2.9)
1/2"
P33FA94DGAN
20 (42)
10 (150)
229 (9.0)
73 (2.9)
73 (2.9)
1/2"
P33FA94DSMN
20 (42)
17 (250)
235 (9.3)
73 (2.9)
73 (2.9)
1/2"
P33FA94DSAN
20 (42)
17 (250)
229 (9.0)
73 (2.9)
73 (2.9)
3/4"
P33FA96DGMN
20 (42)
10 (150)
235 (9.3)
73 (2.9)
73 (2.9)
3/4"
P33FA96DGAN
20 (42)
10 (150)
229 (9.0)
73 (2.9)
73 (2.9)
3/4"
P33FA96DSMN
20 (42)
17 (250)
235 (9.3)
73 (2.9)
73 (2.9)
3/4"
P33FA96DSAN
20 (42)
17 (250)
229 (9.0)
73 (2.9)
73 (2.9)
Standard part numbers shown in bold. For other models refer to Options chart above.
Flow with 6.3 bar (91.3 psig) inlet pressure and 0.2 (3 psig) pressure drop.
B28
P33 Series
Standard Coalescing & Adsorber Filters
Specifications
Flow Charts
0.2
Saturated
Element
Flow
0.1
0
0
0
10
20
30
Flow - dm3/s
20
40
Useful retention
Port size
Weight
1/2, 3/4
Pressure Drop - (psig)
* Inlet pressure 6.3 bar (91.3 psig), Pressure drop 0.2 bar (3 psig),
Saturated Element.
** Inlet pressure 6.3 bar (91.3 psig), Pressure drop 0.4 bar (6 psig),
Saturated Element.
Useful retention refers to volume below the quiet zone baffle.
Without pressure indicator (DPI) max. supply pressure for metal
0.5
0.4
5
4
3
2
1
100
2.0
29
4.0
58
6.3
91.4
0.3
0.2
Saturated
Element
Flow
0.1
0
10
20
Flow - dm3/s
40
Flow - (scfm)
20
30
60
40
80
Material Specifications
73
(2.87)
73
(2.87)
DPI
80
50
Dimensions mm (inches)
40
60
Flow - (scfm)
Adsorber
Standard filtration
3
2
0.3
Filters
Plastic bowl
Metal bowl
Coalescers
Max. supply
pressure
0.4
6.3
91.4
Introduction
(93)
Plastic bowl
-25C to 52C (-13F to 125F)
Metal bowl -25C to 65.5C (-13F to 150F)
4.0
58
36
(1.42)
26
(1.02)
Body
Aluminum
Body cap
ABS
Bowls
Plastic bowl
Metal bowl
Filter element
Polycarbonate
Aluminum
Borosilicate cloth
Adsorber
Activated carbon
Seals
Nitrile
Sight gauge
Metal bowl
Polycarbonate
4mm (5/32)
I.D. tube
barb fitting
Manual Drain
Use 10mm
or 3/8 Flex
Tubing
Bowl removal
51 clearance
(2.00) (Manual &
Auto Drain)
Automatic Drain
P33KA00BGM
P33KA00BSM
Auto drain
P32KA00DA
P33KA00ES9
P33KA00ESC
P33KA00ESA
P33KA00ML
P32KA00MB
P32KA00MT
Body connector
P32KA00CB
P32KA00RQ
B29
Regulators
44
Operating
temperature
2.0
29
Combos
(42)
(72)
Filter /
Regulators
20
34
0.5
Lubricators
scfm
(68)
(93)
Flow capacity
dm3/s
1.0 micron coalescing
Energy efficient elow* 32
Maximum flow**
44
Accessories
(Revised 09-16-13)
Catalog 0700P-E
P31 Series
Mini Regulator
Symbols
Catalog 0700P-E
3
1
Introduction
Combos
Non-rising knob
Options:
Coalescers
P31R A
Regulators
Basic series
Engr level
Global modular
mini regulator
Current
P31R
9 2 B N N P
Thread type
BSPP
BSPT
NPT
Mounting
1
2
9
Filter /
Regulators
psig
1 = 30*
3 = 60
5 = 125
Relief
Lubricators
Relieving
Non-relieving
Reverse flow-relieving
B
N
R
bar
V = 2*
S = 4
T = 8
Accessories
Description
Z
M
G
J
Without gauge
* Unit comes with 0-4 bar or 0-60 psig
gauge respectively.
Not available with poly bowl with bowl
guard.
Port
size
Adjustment range
With round gauge
Port size
1/4
Order code
Flow
3
dm /s (scfm)
Max.
bar (psig)
Height
mm (inches)
Width
mm (inches)
Depth
mm (inches)
1/4"
P31RA92BNNP
30 (64)
20 (300)
100.1 (3.94)
40 (1.58)
40 (1.58)
1/4"
P31RA92BN5P
30 (64)
20 (300)
100.1 (3.94)
40 (1.58)
64.3 (2.53)
Standard part numbers shown in bold. For other models refer to Options chart above.
Flow with 10 bar (145 psig) inlet pressure, 6.3 bar (91.3) psig) set pressure and 1 bar (14.5 psig) pressure drop.
B30
P31 Series
Mini Regulator
Specifications
Flow Charts
1/4 Regulator
1/4
1/8
Weight
80
60
40
20
0
8.0 bar
116 psig
7
6
4
3
2
10
10
20
15
20
Flow - dm3/s
30
25
40
50
Flow - (scfm)
* Inlet pressure 10 bar (145 psig). Secondary pressure 6.3 bar (91.3 psig).
** Non-gauge option only.
4.0 bar
58 psig
2.5 bar
36.3 psig
1
0
6.3 bar
91.4 psig
30
60
35
70
40
80
Material Specifications
Body
Aluminum
Adjustment knob
Acetal
Body cap
Bonnet
P31KA00RB
ABS
P31KA00RC
PBT
P31KA00MM
P31KA00MP
P31KA00MR
P31KA00MW
Diaphragm assembly
Brass / Nitrile
Bottom plug
Springs
Steel
P31KA00MT
Seals
Nitrile
Body connector
P31KA00CB
Panel nut
Acetal
40
(1.58)
Filter /
Regulators
Valve assembly
Gauges
Dimensions mm (inches)
76.3 Round
(3.00) Gauge
61.3 Square
(2.41) Gauge
40
(1.58)
20
(.79)
30.6
(1.20)
56.8
(2.24)
104.1
(4.10)
0-4 bar
K4511SCR04B
0-10 bar
K4511SCR11B
0-60 psig
K4511SCR060
0-150 psig
K4511SCR150
P6G-PR11040
0-10 bar
P6G-PR11100
0-60 psig
P6G-PR11P06
0-150 psig
P6G-PR11P15
! WARNING
Product rupture can cause serious injury.
Do not connect regulator to bottled gas.
Do not exceed Maximum primary pressure rating.
CAUTION:
REGULATOR PRESSURE ADJUSTMENT The working range of knob
adjustment is designed to permit outlet pressures within their full range.
Pressure adjustment beyond this range is also possible because the knob
is not a limiting device. This is a common characteristic of most industrial
regulators, and limiting devices may be obtained only by special design. For
best performance, regulated pressure should always be set by increasing
the pressure up to the desired setting.
K4510N18060
K4510N18160
K4515N18030
K4515N18060
K4515N18160
For best performance, regulated pressure should always be set by increasing the
pressure up to the desired setting.
B31
Introduction
100
Combos
Port size
120
Filters
10
Coalescers
140
Regulators
Lubricators
1/4
Accessories
Flow capacity*
Catalog 0700P-E
P31 Series
Mini Common Regulator
Symbols
Catalog 0700P-E
P2
P2
P2
P2
3
1
P1
P1
Introduction
Combos
Robust construction
Secondary pressure ranges 0-2 bar (0-30 psig), 0-4 bar,
(0-60 psig), 0-8 bar (0-125 psig), 0-17 bar (0-250 psig)
Filters
P1
Non-rising knob
Coalescers
P2
P2
P2
P2
Options:
Regulators
P31H A
Filter /
Regulators
Basic series
Engr level
Current
P31H
9 2 B N N P
Thread type
BSPP
BSPT
NPT
Mounting
1
2
9
Lubricators
1/4
psig
1 = 30*
3 = 60
5 = 125
Relief
Relieving
Non-relieving
B
N
Accessories
Bold items are most common.
1/4"
bar
V = 2*
S = 4
T = 8
Z
M
G
J
Without gauge
* Unit comes with 0-4 bar or 0-60 psig
gauge respectively.
Not available with poly bowl with bowl
guard.
Description
Adjustment range
With round gauge
Port size
Port
size
Order code
Flow
3
dm /s (scfm)
Max.
bar (psig)
Height
mm (inches)
Width
mm (inches)
Depth
mm (inches)
P31HA92BNNP
18 (38)
20 (300)
100.1 (3.94)
40 (1.58)
40 (1.58)
Standard part numbers shown in bold. For other models refer to Options chart above.
Flow with 10 bar (145 psig) inlet pressure, 6.3 bar (91.3) psig) set pressure and 1 bar (14.5 psig) pressure drop.
B32
P31 Series
Mini Common Regulator
Specifications
Flow Charts
1/4 Common Regulator
1/4
1/8
Weight
80
60
40
20
0
5
4
8.0 bar
116 psig
3
2
* Inlet pressure 10 bar (145 psig). Secondary pressure 6.3 bar (91.3 psig).
6.3 bar
91.4 psig
4.0 bar
58 psig
1
0
Introduction
100
Secondary Pressure - bar
2.5 bar
36.3 psig
0
10
10
20
15
20
Flow - dm3/s
30
25
40
50
Flow - (scfm)
30
60
35
70
40
80
Zinc
Adjustment knob
Acetal
Body cap
ABS
Bonnet
Diaphragm assembly
Brass / Nitrile
Bottom plug
Valve assembly
Brass / Nitrile
Dimensions mm (inches)
NOTE: 31.7 mm (1.25 in.) hole
required for panel nut mounting.
40
(1.58)
20
(.79)
40
(1.58)
Coalescers
Body
Filters
Materials of Construction
30.6
(1.20)
56.8
(2.24)
P31KA00RB
P31KA00RC
P31KA00MM
P31KA00MP
P31KA00MR
P31KA00MT
Body connector
P31KA00CB
Accessories
104.1
(4.10)
Gauges
1.00" Round 1/8" center back mount
0-60 psig / 0-4 bar
K4510N18060
K4510N18160
! WARNING
Product rupture can cause serious injury.
Do not connect regulator to bottled gas.
Do not exceed Maximum primary pressure rating.
CAUTION:
REGULATOR PRESSURE ADJUSTMENT The working range of knob
adjustment is designed to permit outlet pressures within their full range.
Pressure adjustment beyond this range is also possible because the knob
is not a limiting device. This is a common characteristic of most industrial
regulators, and limiting devices may be obtained only by special design. For
best performance, regulated pressure should always be set by increasing
the pressure up to the desired setting.
Combos
0-4 bar
P6G-PR11040
0-10 bar
P6G-PR11100
0-60 psig
P6G-PR11P06
0-150 psig
P6G-PR11P15
For best performance, regulated pressure should always be set by increasing the
pressure up to the desired setting.
B33
Regulators
1/4
Filter /
Regulators
Flow capacity*
Lubricators
Catalog 0700P-E
P32 Series
Compact Regulator
Symbols
Catalog 0700P-E
3
1
Introduction
Combos
Non-rising knob
Options:
Coalescers
P32R A
Regulators
Basic series
Engr level
Global modular
compact regulator
Current
P32R
9 2 B N N P
Thread type
BSPP
BSPT
NPT
Mounting
1
2
9
Filter /
Regulators
psig
1 = 30*
3 = 60
5 = 125
2
3
4
bar
V = 2*
S = 4
T = 8
Lubricators
Relieving
Non-relieving
Reverse flow-relieving
B
N
R
Accessories
Description
Z
M
G
J
Without gauge
Relief
Port
size
Adjustment range
With round gauge
Port size
1/4
3/8
1/2
Order code
Flow
3
dm /s (scfm)
Max.
bar (psig)
Height
mm (inches)
Width
mm (inches)
Depth
mm (inches)
1/4"
P32RA92BNNP
41 (81)
20 (300)
136 (5.4)
60 (2.36)
60 (2.36)
1/4"
P32RA92BNGP
41 (81)
20 (300)
136 (5.4)
60 (2.36)
60 (2.36)
3/8"
P32RA93BNNP
65 (138)
20 (300)
136 (5.4)
60 (2.36)
60 (2.36)
3/8"
P32RA93BNGP
65 (138)
20 (300)
136 (5.4)
60 (2.36)
60 (2.36)
1/2"
P32RA94BNNP
67 (142)
20 (300)
136 (5.4)
60 (2.36)
60 (2.36)
1/2"
P32RA94BNGP
67 (142)
20 (300)
136 (5.4)
60 (2.36)
60 (2.36)
Standard part numbers shown in bold. For other models refer to Options chart above.
Flow with 10 bar (145 psig) inlet pressure, 6.3 bar (91.3) psig) set pressure and 1 bar (14.5 psig) pressure drop.
CAUTION:
REGULATOR PRESSURE ADJUSTMENT The working range of knob
adjustment is designed to permit outlet pressures within their full range.
Pressure adjustment beyond this range is also possible because the knob
is not a limiting device. This is a common characteristic of most industrial
regulators, and limiting devices may be obtained only by special design. For
best performance, regulated pressure should always be set by increasing
the pressure up to the desired setting.
! WARNING
Product rupture can cause serious injury.
Do not connect regulator to bottled gas.
Do not exceed Maximum primary pressure rating.
B34
P32 Series
Compact Regulator
Specifications
Flow Charts
Flow capacity*
1/4
41 dm3/s (81 scfm)
3/8
65 dm3/s (138 scfm)
1/2
67 dm3/s (142 scfm)
Operating temperature -25C to 65.5C (-13F to 150F)
1/4 Regulator
20
100
80
60
40
20
10
20
20
30
40
Flow - dm3/s
40
60
80
Flow - (scfm)
50
60
100
70
120
140
Combos
10
9
8
7
8.0 bar
116 psig
6
6.3 bar
91.4 psig
5
4
4.0 bar
58 psig
3
2
2.5 bar
36.3 psig
1
0
10
20
20
30
40
60
40
50
Flow - dm3/s
80
60
100
120
70
80
140
160
60
40
20
Regulators
8
7
8.0 bar
116 psig
6.3 bar
91.4 psig
5
4
3
2
2.5 bar
36.3 psig
1
0
10
20
20
40
30
60
40
50
Flow - dm3/s
60
80
100
120
Flow - (scfm)
70
140
4.0 bar
58 psig
80
160
90
180
Gauges
50mm (2") Round 1/4" center back mount
0-30 psig / 0-2 bar
K4520N14030
0-60 psig / 0-4 bar
K4520N14060
0-160 psig / 0-11 bar
K4520N14160
0-300 psig / 0-20 bar
K4520N14300
Square flush mount gauge
0-4 bar
K4511SCR04B
0-10 bar
K4511SCR11B
0-60 psig
K4511SCR060
0-150 psig
K4511SCR150
Square with adapter kit
0-4 bar
P6G-PR11040
0-10 bar
P6G-PR11100
0-60 psig
P6G-PR11P06
0-150 psig
P6G-PR11P15
Digital 1.75" Round 1/8" center back mount
0-160 psig / 0-11 bar
K4517N14160D
For best performance, regulated pressure should always be set by increasing the
pressure up to the desired setting.
B35
Filter /
Regulators
80
Lubricators
120
10
Accessories
140
P32KA00RB
P32KA00RC
P32KA00MM
P32KA00MP
P32KA00MR
P32KA00MT
P32KA00MB
P32KA00CB
4.0 bar
58 psig
2.5 bar
36.3 psig
1/2 Regulator
93 Round
(3.66) Gauge
81 Square
(3.19) Gauge
60
(2.36)
30
(1.18)
Flow - (scfm)
Dimensions mm (inches)
136.1
(5.36)
6.3 bar
91.4 psig
100
73.8
(2.91)
Filters
120
38.5
(1.52)
140
Body
Aluminum
Acetal
Adjustment knob
ABS
Body cap
Bonnet
33% Glass-filled nylon
Diaphragm assembly
Nitrile / Zinc
33% Glass-filled nylon
Bottom plug
Brass / Nitrile
Valve assembly
Main regulating valve
Steel S.S.
Springs
Seals
Nitrile
Acetal
Panel nut
8.0 bar
116 psig
Introduction
40
3/8 Regulator
Material Specifications
60
(2.36)
60
* Inlet pressure 10 bar (145 psig). Secondary pressure 6.3 bar (91.3 psig).
80
Coalescers
100
9
Secondary Pressure - bar
120
10
140
Secondary Pressure - (psig)
(Revised 05-13-14)
Catalog 0700P-E
P32 Series
Compact Common Regulator
Symbols
Catalog 0700P-E
3
1
P2
P1
Introduction
P1
Combos
Robust construction
Secondary pressure ranges 0-2 bar (0-30 psig), 0-4 bar,
(0-60 psig), 0-8 bar (0-125 psig), 0-17 bar (0-250 psig)
Filters
P1
Non-rising knob
Coalescers
P2
P2
P2
P2
Options:
Regulators
P32H
Filter /
Regulators
Basic series
Engr level
Global modular
compact regulator
Current
P32H
9 2 B N N P
Thread type
BSPP
BSPT
NPT
Mounting
1
2
9
Port size
Lubricators
1/4
3/8
1/2
psig
1 = 30*
3 = 60
5 = 125
2
3
4
bar
V = 2*
S = 4
T = 8
Accessories
Relieving
Non-relieving
B
N
Description
Z
M
G
J
Without gauge
Relief
Port
size
Adjustment range
With round gauge
Order code
Flow
3
dm /s (scfm)
Max.
bar (psig)
Height
mm (inches)
Width
Depth
mm (inches) mm (inches)
1/4"
P32HA92BNNP
28 (59)
20 (300)
136 (5.4)
60 (2.36)
60 (2.36)
3/8"
P32HA93BNNP
28 (59)
20 (300)
136 (5.4)
60 (2.36)
60 (2.36)
1/2"
P32HA94BNNP
28 (59)
20 (300)
136 (5.4)
60 (2.36)
60 (2.36)
Standard part numbers shown in bold. For other models refer to Options chart above.
Flow with 10 bar (145 psig) inlet pressure, 6.3 bar (91.3) psig) set pressure and 1 bar (14.5 psig) pressure drop.
B36
P32 Series
Compact Common Regulator
Specifications
Flow Charts
Flow capacity*
1/4
28 dm3/s (59 scfm)
3/8
28 dm3/s (59 scfm)
1/2
28 dm3/s (59 scfm)
Operating temperature -25C to 65.5C (-13F to 150F)
60
40
20
0
5
4
3
8.0 bar
116 psig
6.3 bar
91.4 psig
2
1
0
4.0 bar
58 psig
2.5 bar
36.3 psig
0
10
20
20
30
Flow - dm3/s
40
40
60
80
Flow - (scfm)
* Inlet pressure 10 bar (145 psig). Secondary pressure 6.3 bar (91.3 psig).
50
100
Introduction
80
60
120
Combos
100
Secondary Pressure - (psig)
(Revised 05-13-14)
Catalog 0700P-E
Material Specifications
60
(2.36)
60
(2.36)
30
(1.18)
38.5
(1.52)
P32KA00MM
P32KA00MP
P32KA00MR
P32KA00MT
T-bracket
P32KA00MB
Body connector
P32KA00CB
Gauges
73.8
(2.91)
136.1
(5.36)
! WARNING
Product rupture can cause serious injury.
Do not connect regulator to bottled gas.
Do not exceed Maximum primary pressure rating.
CAUTION:
REGULATOR PRESSURE ADJUSTMENT The working range of knob
adjustment is designed to permit outlet pressures within their full range.
Pressure adjustment beyond this range is also possible because the knob
is not a limiting device. This is a common characteristic of most industrial
regulators, and limiting devices may be obtained only by special design. For
best performance, regulated pressure should always be set by increasing
the pressure up to the desired setting.
B37
Regulators
P32KA00RC
Lubricators
P32KA00RB
Accessories
Dimensions mm (inches)
Filter /
Regulators
Coalescers
Filters
Body
Zinc
Acetal
Adjustment knob
Body cap
ABS
Bonnet
33% Glass-filled nylon
Diaphragm assembly
Nitrile / Zinc
Bottom plug
33% Glass-filled nylon
Brass / Nitrile
Valve assembly
Springs
Main regulating valve
Steel S.S.
Seals
Nitrile
Panel nut
Acetal
P33 Series
Standard Regulator
Symbols
Catalog 0700P-E
3
1
Introduction
Combos
Non-rising knob
Options:
Coalescers
P33R A
Regulators
Basic series
Engr level
Global modular
standard regulator
Current
P33R
9 2 B N N P
Thread type
BSPP
BSPT
NPT
Mounting
1
2
9
Adjustment range
With round gauge
Port size
Filter /
Regulators
1/2
3/4
4
6
Relief
Lubricators
Relieving
Non-relieving
Reverse flow-relieving
B
N
R
Accessories
Port
size
Description
Z
M
G
J
Without gauge
L
Order code
Flow
3
dm /s (scfm)
Max.
bar (psig)
Height
mm (inches)
Width
mm (inches)
Depth
mm (inches)
1/2"
P33RA94BNNP
100 (212)
20 (300)
149 (5.9)
73 (2.9)
73 (2.9)
1/2"
P33RA94BNGP
100 (212)
20 (300)
149 (5.9)
73 (2.9)
73 (2.9)
3/4"
P33RA96BNNP
100 (212)
20 (300)
149 (5.9)
73 (2.9)
73 (2.9)
3/4"
P33RA96BNGP
100 (212)
20 (300)
149 (5.9)
73 (2.9)
73 (2.9)
Standard part numbers shown in bold. For other models refer to Options chart above.
Flow with 10 bar (145 psig) inlet pressure, 6.3 bar (91.3) psig) set pressure and 1 bar (14.5 psig) pressure drop.
B38
P33 Series
Standard Regulator
Specifications
Flow Charts
1/2 Regulator
Port size
1/2, 3/4
1/4
80
60
40
20
8
6
5
3
2
4.0 bar
58 psig
2.5 bar
36.3 psig
1
0
20
40
40
60
80
Flow - dm3/s
80
100
120
160
Flow - (scfm)
200
120
240
140
280
* Inlet pressure 10 bar (145 psig). Secondary pressure 6.3 bar (91.3 psig).
3/4 Regulator
100
80
60
40
20
0
8
8.0 bar
116 psig
7
6
5
6.3 bar
91.4 psig
4
3
2
0
4.0 bar
58 psig
2.5 bar
36.3 psig
1
0
20
40
40
80
60
80
100
Flow - dm3/s
120
120
160
200
240
Flow - (scfm)
140
280
160
300
340
Dimensions mm (inches)
108 Round
4.27) Gauge
37
(1.44)
73
(2.87)
120
9
Secondary Pressure - bar
Body
Aluminum
Acetal
Adjustment knob
Body cap
ABS
Bonnet
33% Glass-filled nylon
Diaphragm assembly
Nitrile / Zinc
Brass / Nitrile / Acetal
Valve assembly
Springs
Main regulating valve
Steel S.S.
Nitrile
Seals
Panel nut
Acetal
10
140
Coalescers
Material Specifications
73
(2.87)
44
(1.73)
83.8
(3.30)
149
(5.87)
P33KA00RB
P33KA00RC
P33KA00MM
P33KA00MP
P33KA00MR
P32KA00MT
T-bracket
P32KA00MB
Body connector
P32KA00CB
Gauges
50mm (2") Round 1/4" center back mount
0-30 psig / 0-2 bar
K4520N14030
0-60 psig / 0-4 bar
K4520N14060
0-160 psig / 0-11 bar
K4520N14160
0-300 psig / 0-20 bar
K4520N14300
Digital 1.75" Round 1/8" center back mount
0-160 psig / 0-11 bar
K4517N14160D
! WARNING
Product rupture can cause serious injury.
Do not connect regulator to bottled gas.
Do not exceed Maximum primary pressure rating.
For best performance, regulated pressure should always be set by increasing the
pressure up to the desired setting.
CAUTION:
REGULATOR PRESSURE ADJUSTMENT The working range of knob
adjustment is designed to permit outlet pressures within their full range.
Pressure adjustment beyond this range is also possible because the knob
is not a limiting device. This is a common characteristic of most industrial
regulators, and limiting devices may be obtained only by special design. For
best performance, regulated pressure should always be set by increasing
the pressure up to the desired setting.
B39
Weight
8.0 bar
116 psig
6.3 bar
91.4 psig
Introduction
100
Combos
120
Filters
Regulators
10
140
Filter /
Regulators
Lubricators
1/2
3/4
Accessories
Flow capacity*
(Revised 05-13-14)
Catalog 0700P-E
P31 Series
Mini Filter / Regulator
Symbols
Catalog 0700P-E
Introduction
Combos
Filters
Options:
Coalescers
P31E A
Regulators
Basic series
Engr level
Global modular
mini filter / regulator
Current
P31E
9 2 E G M B N 5 P
Thread type
Element
BSPP
BSPT
NPT
5 Element
1
2
9
B
N
Relief
Mounting
Relieving
Non-relieving
Plastic panel
P
mount nut
Drain type
Port size
Filter /
Regulators
1/4
B
M
Pulse drain
Manual drain
Bowl type
Adjustment range
With round gauge
Lubricators
psig
1 = 30*
3 = 60
5 = 125
bar
V = 2*
S = 4
T = 8
Z
M
G
J
Accessories
Without gauge
* Unit comes with 0-4 bar or
0-60 psig gauge respectively.
Not available with poly bowl
with bowl guard.
Port
size
Description
Order code
Flow
3
dm /s (scfm)
Max.
bar (psig)
Height
Width
Depth
mm (inches) mm (inches) mm (inches)
1/4"
P31EA92EGMBN5P
14 (30)
10 (150)
164.1 (6.46)
40 (1.58)
64 (2.53)
1/4"
P31EA92EGBBN5P
14 (30)
10 (150)
164.1 (6.46)
40 (1.58)
64 (2.53)
1/4"
P31EA92EMMBN5P
14 (30)
17 (250)
164.1 (6.46)
40 (1.58)
64 (2.53)
1/4"
P31EA92EMBBN5P
14 (30)
17 (250)
164.1 (6.46)
40 (1.58)
64 (2.53)
Standard part numbers shown in bold. For other models refer to Options chart above.
Flow with 10 bar (145 psig) inlet pressure, 6.3 bar (91.3) psig) set pressure and 1 bar (14.5 psig) pressure drop.
B40
P31 Series
Mini Filter / Regulator
Specifications
Flow Charts
* Inlet pressure 10 bar (145 psig). Secondary pressure 6.3 bar (91.3 psig).
** Non-gauge option only.
Air quality:
Within ISO 8573-1: 1991 Class 3 (Particulates)
Within ISO 8573-1: 2001 Class 6 (Particulates)
WARNING
6.3 bar
91.4 psig
4
3
2
4.0 bar
58 psig
2.5 bar
36.3 psig
1
0
5
0
10
10
20
15
20
Flow - dm3/s
30
40
Flow - (scfm)
25
50
30
60
35
70
Material Specifications
Body
Adjustment knob
Body cap
Bonnet
Bowl
Plastic bowl
Metal bowl
Bowl guard
Filter element
Seals
Springs
Valve assembly
Diaphragm assembly
Panel nut
Aluminum
Acetal
ABS
PBT
Polycarbonate
Aluminum
Nylon
Polyethylene
Nitrile
Steel
Brass / Nitrile
Brass / Nitrile
Acetal
74.3 Round
(2.93) Gauge
40
(1.58)
20
(.79)
73.5
(2.89)
176.9
(6.96)
P31KA00BGM
P31KA00BMM
P31KA00BGB
P31KA00BMB
P31KA00ESE
P31KA00RB
P31KA00RC
P31KA00MM
P31KA00MP
P31KA00MR
P31KA00MW
P31KA00MT
Body connector
P31KA00CB
Gauges
4mm (5/32)
I.D. tube
barb fitting
Manual Drain
61.3 Square
(2.41) Gauge
Pulse Drain
Note:
Flush-mounted gauge kits will not fit units originally purchased with threaded
gauge ports.
0-4 bar
K4511SCR04B
0-10 bar
K4511SCR11B
0-60 psig
K4511SCR060
0-150 psig
K4511SCR150
For best performance, regulated pressure should always be set by increasing the
pressure up to the desired setting.
B41
Introduction
20
Combos
40
8.0 bar
116 psig
For best performance, regulated pressure should always be set by increasing the
pressure up to the desired setting.
Dimensions mm (inches)
40
(1.58)
60
Filters
Port size
BSPP / BSPT / NPT
1/4
Gauge port (2 ea.)**
BSPP / BSPT / NPT
1/8
Weight
0.19 kg (0.42 lbs)
80
Coalescers
100
Regulators
120
10
Filter /
Regulators
140
Lubricators
Max. supply
Plastic bowl
pressure
Metal bowl
Standard filtration
Useful retention
Adjusting range pressure
Plastic bowl
-10C to 52C (14F to 125F)
Metal bowl -10C to 65.5C (14F to 150F)
Secondary Pressure - (psig)
Operating
temperature
Accessories
Catalog 0700P-E
P32 Series
Compact Filter / Regulator
Symbols
Catalog 0700P-E
Introduction
Combos
Options:
Filters
P32E
Coalescers
Basic series
Engr level
Global modular
mini filter / regulator
Current
P32E
9 2 E G M B N N P
Thread type
Element
BSPP
BSPT
NPT
5 Element
1
2
9
B
N
Relief
Mounting
Relieving
Non-relieving
Plastic panel
P
mount nut
Regulators
Drain type
M
A
Port size
Filter /
Regulators
1/4
3/8
1/2
2
3
4
Manual drain
Auto drain
Adjustment range
With round gauge
Bowl type
psig
1 = 30*
3 = 60
5 = 125
Lubricators
bar
V = 2*
S = 4
T = 8
Z
M
G
J
Without gauge
Accessories
Description
Order code
Flow
3
dm /s (scfm)
Max.
bar (psig)
Height
Width
Depth
mm (inches) mm (inches) mm (inches)
1/4"
P32EA92EGMBNGP
42 (89)
10 (150)
254 (10.0)
60 (2.36)
60 (2.36)
1/4"
P32EA92EGABNGP
42 (89)
10 (150)
248 (9.76)
60 (2.36)
60 (2.36)
1/4"
P32EA92ESMBNGP
42 (89)
17 (250)
245 (9.66)
60 (2.36)
60 (2.36)
1/4"
P32EA92ESABNGP
42 (89)
17 (250)
254 (10.0)
60 (2.36)
95 (3.74)
3/8"
P32EA93EGMBNGP
58 (123)
10 (150)
254 (10.0)
60 (2.36)
60 (2.36)
3/8"
P32EA93EGABNGP
58 (123)
10 (150)
248 (9.76)
60 (2.36)
60 (2.36)
3/8"
P32EA93ESMBNGP
58 (123)
17 (250)
245 (9.66)
60 (2.36)
60 (2.36)
3/8"
P32EA93ESABNGP
58 (123)
17 (250)
254 (10.0)
60 (2.36)
95 (3.74)
1/2"
P32EA94EGMBNGP
64 (136)
10 (150)
245 (9.66)
60 (2.36)
95 (3.74)
1/2"
P32EA94EGABNGP
64 (136)
10 (150)
248 (9.76)
60 (2.36)
95 (3.74)
1/2"
P32EA94ESMBNGP
64 (136)
17 (250)
245 (9.66)
60 (2.36)
60 (2.36)
1/2"
P32EA94ESABNGP
64 (136)
17 (250)
254 (10.0)
60 (2.36)
60 (2.36)
Standard part numbers shown in bold. For other models refer to Options chart above.
Flow with 10 bar (145 psig) inlet pressure, 6.3 bar (91.3) psig) set pressure and 1 bar (14.5 psig) pressure drop.
B42
P32 Series
Compact Filter / Regulator
Specifications
Flow Charts
40
20
8.0 bar
116 psig
6
5
4
2
2.5 bar
36.3 psig
6.3 bar
4.0 bar 91.4 psig
58 psig
10
20
20
30
40
Flow - dm3/s
40
60
50
80
Flow - (scfm)
60
100
70
120
140
10
140
Air quality:
Within ISO 8573-1: 1991 Class 3 (Particulates)
Within ISO 8573-1: 2001 Class 6 (Particulates)
80
60
40
20
0
Material Specifications
8.0 bar
116 psig
6
5
4.0 bar
58 psig
3
2
2.5 bar
36.3 psig
1
0
10
20
20
30
40
Flow - dm3/s
40
60
50
93 Round
(3.66) Gauge
60
(2.36)
30
(1.18)
97.6
(3.84)
261.6
(10.30)
60
100
80
Flow - (SCFM)
120
70
140
80
160
100
80
60
40
20
0
Regulators
120
10
9
Secondary Pressure - bar
140
8
7
8.0 bar
116 psig
6
5
6.3 bar
91.4 psig
4.0 bar
58 psig
3
2
2.5 bar
36.3 psig
1
0
10
20
20
40
30
60
40
50
Flow - dm3/s
80
100
120
Flow - (scfm)
60
70
140
80
160
90
180
Dimensions mm (inches)
6.3 bar
91.4 psig
1/2 Filter/Regulator
Secondary Pressure - (psig)
Body
Aluminum
Adjustment knob
Acetal
ABS
Body cap
Element retainer / Baffle
Acetal
Bowl
Plastic bowl
Polycarbonate
Metal bowl
Zinc
Bowl guard
Nylon
Sintered polyethylene
Filter element
Seals
Nitrile
Main regulating / valve
Steel / S.S.
Springs
Valve assembly
Brass / Nitrile
Diaphragm assembly
Nitrile / Zinc
Panel nut
Acetal
Metal bowl
Polycarbonate
Sight gauge
Filters
100
9
Secondary Pressure - bar
120
Combos
3/8 Filter/Regulator
P32KA00BGM
P32KA00BSM
P32KA00DA
P32KA00ESE
P32KB00RB
P32KB00RC
P32KA00MM
P32KA00MP
P32KB00MR
P32KA00MB
P32KA00MT
P32KA00CB
Gauges
4mm (5/32)
I.D. tube
barb fitting
81 Square
(3.19) Gauge
Bowl
58 removal
(2.28) clearance
Manual Drain
Automatic Drain
WARNING
B43
B
Introduction
60
Coalescers
80
Filter /
Regulators
100
Lubricators
120
* Inlet pressure 10 bar (145 psig). Secondary pressure 6.3 bar (91.3 psig).
Useful retention refers to volume below the quiet zone baffle.
60
(2.36)
10
140
Accessories
(Revised 05-13-14)
Catalog 0700P-E
P33 Series
Standard Filter / Regulator
Symbols
Catalog 0700P-E
Introduction
Combos
Filters
Options:
Coalescers
P33E A
Regulators
Basic series
Engr level
Global modular
P33E
standard filter / regulator
Current
9 2 E G M B N N P
Thread type
Element
BSPP
BSPT
NPT
5 Element
1
2
9
B
N
Relief
Mounting
Relieving
Non-relieving
Plastic panel
P
mount nut
Adjustment range
With round gauge
Drain type
M
A
Filter /
Regulators
Port size
1/2
3/4
4
6
Manual drain
Auto drain
Bowl type
Lubricators
Z
M
G
J
Without gauge
Accessories
guard.
Port
size
Description
Order code
Flow
3
dm /s (scfm)
Max.
bar (psig)
Height
Width
Depth
mm (inches) mm (inches) mm (inches)
1/2"
P33EA94EGMBNGP
90 (191)
10 (150)
291 (11.44)
73 (2.9)
73 (2.9)
1/2"
P33EA94EGABNGP
90 (191)
10 (150)
285 (11.22)
73 (2.9)
73 (2.9)
1/2"
P33EA94ESMBNGP
90 (191)
17 (250)
282 (11.0)
73 (2.9)
73 (2.9)
1/2"
P33EA94ESABNGP
90 (191)
17 (250)
291 (11.44)
73 (2.9)
108 (4.27)
3/4"
P33EA96EGMBNGP
98 (208)
10 (150)
282 (11.0)
73 (2.9)
108 (4.27)
3/4"
P33EA96EGABNGP
98 (208)
10 (150)
285 (11.22)
73 (2.9)
108 (4.27)
3/4"
P33EA96ESMBNGP
98 (208)
17 (250)
291 (11.44)
73 (2.9)
73 (2.9)
3/4"
P33EA96ESABNGP
98 (208)
17 (250)
282 (11.0)
73 (2.9)
73 (2.9)
Standard part numbers shown in bold. For other models refer to Options chart above.
Flow with 10 bar (145 psig) inlet pressure, 6.3 bar (91.3) psig) set pressure and 1 bar (14.5 psig) pressure drop.
B44
P33 Series
Standard Filter / Regulator
Specifications
Flow Charts
Dimensions mm (inches)
108 Round
(4.27) Gauge
73
(2.87)
73
(2.87)
37
(1.44)
104
(4.09)
291
(11.44)
6.5 bar
94.3 psig
4.0 bar
58 psig
3
2
2.5 bar
36.3 psig
1
0
10
20
20
30
40
40
60
50
100
80
60
70
Flow - dm3/s
80
90
180
100
200
220
110
120
240
130
260
3/4 Filter/Regulator
120
100
80
60
40
20
0
10
Filters
140
8
7
8.0 bar
116 psig
6.5 bar
94.3 psig
5
4
4.0 bar
58 psig
3
2
2.5 bar
36.3 psig
1
0
10
20
20
40
30
60
40
80
50
60
70
80 90
Flow - dm3/s
100
150
100 120 140 160 180 200 220 240 260 280 300
Flow - (scfm)
P33KA00BGM
P33KA00BSM
Auto drain
P32KA00DA
P33KA00ESE
P33KA00RB
P33KA00RC
P33KA00MM
P33KA00MP
P33KA00MR
P32KA00MB
P32KA00MT
Body connector
P32KA00CB
Gauges
50mm (2") Round 1/4" center back mount
Bowl
removal
51 clearance
(2.00) (Manual &
Auto Drain)
4mm (5/32)
I.D. tube
barb fitting
Use 10mm or
3/8" Flex Tubing
72
(2.83)
Manual Drain
Automatic Drain
WARNING
K4520N14030
K4520N14060
K4520N14160
K4520N14300
K4517N14160D
B45
Introduction
Combos
8.0 bar
116 psig
Coalescers
20
Regulators
40
60
Filter /
Regulators
Body
Aluminum
Adjustment knob
Acetal
ABS
Body cap
Element retainer / Baffle
Acetal
Bowls
Plastic bowl
Polycarbonate
Metal bowl
Aluminum
Filter element
Sintered Polyethylene
Seals
Nitrile
Main regulating / Valve
Steel / S.S.
Springs
Valve assembly
Brass / Nitrile
Diaphragm assembly
Nitrile / Zinc
Panel nut
Acetal
Metal bowl
Polycarbonate
Sight gauge
80
Lubricators
Material Specifications
100
Accessories
Air quality:
Within ISO 8573-1: 1991 Class 3 (Particulates)
Within ISO 8573-1: 2001 Class 6 (Particulates)
120
10
* Inlet pressure 10 bar (145 psig). Secondary pressure 6.3 bar (91.3 psig).
Useful retention refers to volume below the quiet zone baffle.
140
(Revised 05-13-14)
Catalog 0700P-E
P31 Series
Mini Lubricator
Symbol
Catalog 0700P-E
Lubricator
with drain
Introduction
Combos
Filters
Options:
Coalescers
P31L A
Regulators
Basic series
Engr level
Global modular
mini lubricator
Current
P31L
9 2 L G N N
Mounting
Thread type
A
BSPP
BSPT
NPT
1
2
9
Drain type
N
Port size
Filter /
Regulators
1/4
Bowl type
G
M
Lube type
Oil mist standard sight dome
Lubricators
Port
size
Description
Order code
No bracket
Flow
3
dm /s (scfm)
Max.
bar (psig)
Height
mm (inches)
Width
mm (inches)
Depth
mm (inches)
Accessories
1/4"
P31LA92LGNN
13 (28)
10 (150)
147.5 (5.80)
40 (1.58)
42.7 (1.68)
1/4"
P31LA92LMNN
13 (28)
17 (250)
147.5 (5.80)
40 (1.58)
42.7 (1.68)
Standard part numbers shown in bold. For other models refer to Options chart above.
Flow with 6.3 bar (91.3 psig) inlet pressure and 0.34 bar (4.9 psig) pressure drop.
B46
P31 Series
Mini Lubricator
Specifications
Flow Charts
Plastic bowl
-10C to 52C (14F to 125F)
Metal bowl -10C to 65.5C (14F to 150F)
Max. supply
pressure
Plastic bowl
Metal bowl
Useful retention
Port size
1/4 Lubricator
Weight
1/4
0.13 kg (0.29 lbs)
0.5
0.4
5
4
3
2
1
* Inlet pressure 6.3 bar (91.3 psig). Pressure drop 0.34 bar (4.9 psig).
1.6
23.2
4.0
58
6.3
91.4
10
145
0.3
0.2
0.1
0
10
10
15
Flow - dm3/s
20
30
Flow - (scfm)
20
40
25
50
Body
Aluminum
Body cap
ABS
Polycarbonate
Aluminum
Seals
Coalescers
Plastic bowl
Metal bowl
Nitrile
Polycarbonate
Suggested lubricant
Pick-up filter
Sintered bronze
40
(1.58)
20
(.79)
40
(1.58)
56.3
(2.22)
P31KA00BGN
P32KA00PG
Fill plug
P31KA00PL
P31KA00MW
P31KA00MT
Body connector
P31KA00CB
153.3
(6.04)
Bowl
33 removal
(1.30) clearance
B47
Accessories
Dimensions mm (inches)
Lubricators
Filter /
Regulators
Sight dome
Regulators
Bowl
Filters
Material Specifications
Introduction
Operating
temperature
Combos
Catalog 0700P-E
P32 Series
Compact Lubricator
Symbol
Catalog 0700P-E
Lubricator
with drain
Introduction
Combos
Filters
Options:
Coalescers
P32L
Regulators
Basic series
Engr level
Global modular
compact lubricator
Current
P32L
9 2 L G N N
Thread type
BSPP
BSPT
NPT
Mounting
1
2
9
Drain type
N
Port size
Filter /
Regulators
1/4
3/8
1/2
No bracket
Bowl type
2
3
4
G
M
S
Lubricators
Lube type
Oil mist standard sight dome
Accessories
Order code
Flow
3
dm /s (scfm)
Max.
bar (psig)
Height
mm (inches)
Width
mm (inches)
Depth
mm (inches)
P32LA92LGNN
18 (38)
10 (150)
211 (8.30)
60 (2.36)
60 (2.36)
1/4"
P32LA92LSNN
18 (38)
17 (250)
211 (8.30)
60 (2.36)
60 (2.36)
3/8"
P32LA93LGNN
32 (68)
10 (150)
211 (8.30)
60 (2.36)
60 (2.36)
3/8"
P32LA93LSNN
32 (68)
17 (250)
211 (8.30)
60 (2.36)
60 (2.36)
1/2"
P32LA94LGNN
47 (100)
10 (150)
211 (8.30)
60 (2.36)
60 (2.36)
1/2"
P32LA94LSNN
47 (100)
17 (250)
211 (8.30)
60 (2.36)
60 (2.36)
Port
size
Description
1/4"
Standard part numbers shown in bold. For other models refer to Options chart above.
Flow with 6.3 bar (91.3 psig) inlet pressure and 0.34 bar (4.9 psig) pressure drop.
B48
P32 Series
Compact Lubricator
Specifications
Flow Charts
Useful retention
BSPP / BSPT / NPT
(4.09 US oz.)
3
2
1
Weight
0.2
0.1
0
10
10
20
Flow - dm3/s
20
30
Flow - (scfm)
30
40
50
60
ABS
Plastic bowl
Metal bowl
Polycarbonate
Aluminum
0.4
5
4
3
2
10
145
0.2
Nitrile
Sight dome
Polycarbonate
Sight gauge
Polycarbonate
10
Suggested lubricant
20
Pick-up filter
Sintered bronze
0.1
0
20
30
40
Flow - dm3/s
40
60
80
Flow - (scfm)
50
60
100
120
70
140
1/2 Lubricator
60
(2.36)
30
(1.18)
0.5
0.4
5
4
3
2
1
0
62.3
(2.45)
1.6
23.2
10
30
20
4.0
58
6.3
91.4
10
145
0.3
Lubricators
Dimensions mm (inches)
7
Pressure Drop - bar
Metal bowl
4.0 6.3
58 91.4
0.3
Seals
1.6
23.2
Filters
Body cap
0.5
Regulators
Aluminum
7
Pressure Drop - bar
Body
3/8 Lubricator
Material Specifications
60
(2.36)
10
145
0.3
* Inlet pressure 6.3 bar (91.3 psig). Pressure drop 0.34 bar (4.9 psig).
Bowls
6.3
91.4
Filter /
Regulators
Port size
121
cm3
0.4
4.0
58
0.2
0.1
0
20
40
60
40
50
Flow - dm3/s
80
100
Flow - (scfm)
60
120
70
140
80
160
217.3
(8.56)
Bowl
58 removal
(2.28) clearance
P32KA00BGN
P32KA00PG
Fill plug
P32KA00PL
P32KA00ML
P32KA00MB
P32KA00MT
Body connector
P32KA00CB
B49
Introduction
Plastic bowl
Metal bowl
1.6
23.2
Combos
Max. supply
pressure
Coalescers
0.5
Accessories
Operating
temperature
1/4 Lubricator
Catalog 0700P-E
P33 Series
Standard Lubricator
Symbol
Catalog 0700P-E
Lubricator
with drain
Introduction
Combos
Filters
Options:
Coalescers
P33L
Regulators
Basic series
Engr level
Global modular
standard lubricator
Current
P33LA
9 2 L G N N
Thread type
BSPP
BSPT
NPT
Mounting
1
2
9
Drain type
N
Port size
Filter /
Regulators
1/2
3/4
Bowl type
4
6
G
M
S
Lube type
Lubricators
Port
size
Description
No bracket
Order code
Flow
3
dm /s (scfm)
Max.
bar (psig)
Height
mm (inches)
Width
mm (inches)
Depth
mm (inches)
Accessories
1/2"
P33LA94LGNN
48 (102)
10 (150)
234 (9.21)
73 (2.9)
73 (2.9)
1/2"
P33LA94LSNN
48 (102)
17 (250)
234 (9.21)
73 (2.9)
73 (2.9)
3/4"
P33LA96LGNN
68 (144)
10 (150)
234 (9.21)
73 (2.9)
73 (2.9)
3/4"
P33LA96LSNN
68 (144)
17 (250)
234 (9.21)
73 (2.9)
73 (2.9)
Standard part numbers shown in bold. For other models refer to Options chart above.
Flow with 6.3 bar (91.3 psig) inlet pressure and 0.34 bar (4.9 psig) pressure drop.
B50
P33 Series
Standard Lubricator
Specifications
Flow Charts
0.4
5
4
3
2
1
0.1
Sight gauge
Metal bowl
20
20
40
30
60
40
80
50
60
70
Flow - dm3/s
80
90
100
110
120
Nitrile
Polycarbonate
0.5
0.4
5
4
3
2
1
Polycarbonate
1.6
23.2
4.0
58
6.3
91.4
Filters
Polycarbonate
Aluminum
7
Pressure Drop - bar
ABS
Seals
Sight dome
10
0.3
Coalescers
Aluminum
Body cap
Plastic bowl
Metal bowl
3/4 Lubricator
Body
Bowls
0.2
* Inlet pressure 6.3 bar (91.3 psig). Pressure drop 0.34 bar (4.9 psig).
Material Specifications
10
145
0.3
6.3
91.4
0.2
0.1
0
Suggested lubricant
10
20
Pick-up filter
Sintered bronze
20
40
30
60
40
80
50
60
70
Flow - dm3/s
80
90
100
110
120
Filter /
Regulators
Weight
1/2, 3/4
4.0
58
Dimensions mm (inches)
Repair and Service Kits
73
(2.90)
36
(1.44)
73
(2.90)
51
(2.00)
P33KA00BGN
P32KA00PG
Fill plug
P32KA00PL
P33KA00ML
P32KA00MB
P32KA00MT
Body connector
P32KA00CB
234
(9.20)
51 Bowl
(2.00) removal
clearance
B51
Introduction
Useful retention
Port size
Combos
Plastic bowl
Metal bowl
0.5
Regulators
Max. supply
pressure
Lubricators
Accessories
Operating
temperature
1/2 Lubricator
Catalog 0700P-E
Catalog 0700P-E
Introduction
Combos
Protection to IP65
P31P Series
Bottom exhaust
P32P Series
Bottom exhaust
Options:
Filters
P31P A 9 2 A D 2
Coalescers
Regulators
Body size
Engr level
Global modular
mini (1/4")
Global modular
compact (1/2")
Current
P31P
Thread type
A
P32P
BSPP
BSPT
NPT
Power supply
1
2
9
Port size
D 1 A
0-10V
Filter /
Regulators
2
4
Lubricators
A
E
Accessories
M12 (4-pin)
Output signal
D
P
N
M
Digital, PNP
PNP or 0-10V
NPN or 0-10V
4-20mA fixed
Version
Bottom ported exhaust (NC)
Bottom ported forced exhaust (NO)
Input Connector
Control signal
24 volts
Pressure range
Z
D
Order Code
Description
Order Code
Description
P3HKA00ML
P3KKA00ML
P3HKA00MC
P3KKA00MC
L-Bracket
Foot Bracket
L-Bracket
Foot Bracket
Cables
Order Code
Description
CB-M12-4P-2M
B52
Catalog 0700P-E
Control signals
The electronic pressure regulator can be externally controlled
through an analogue control signal of either
0-10V or 4-20mA. (parameter 4).
Output signals
As soon as the output pressure is within the signal band a
signal is given of 24VDC, PNP Ri = 1 kOhm
Outside the signal band this connection is 0V.
Weights:
P31P = 0.291 kg (0.64 lbs)
P32P = 0.645 kg (1.42 lbs)
Pin No.
1
24 V
Supply
0 to 10 V
4 to 20mA
0 V (GND)
Supply
Blue
24 V
Black
Brown
White
Lubricators
Display
The regulator is provided with a digital display, indicating the
output pressure, either in bar or psig.
The factory setting is as indicated on the label, can be changed
through to software at all times (parameter 14)
Color
Filter /
Regulators
Air consumption
No consumption in stable regulated situation.
Function
Filters
Connections
(In case of output signal (Option D)
Central M12 connector 4-pole
The electrical connections are as follows:
B
Introduction
Power consumption
Max. 1.1W with unloaded signal outputs
Combos
Supply pressure
Max. Operating Pressure:
2 bar unit:............................ 3 bar (43.5 psig)
10 bar unit: . ......................... 10.5 bar (152 psig)
Min. Operating Pressure........ P2 Pressure + 0.5 bar (7.3 psig)
Coalescers
Supply voltage
24 VDC +/- 10%
Regulators
Working medium
Compressed air or inert gasses, filtered to 40.
Accessories
Schematic
B53
Technical information
Advanced functionality
Dead band
The dead band is preset at 1.3% of Full Scale*, adjustable via
parameter 13.
Accuracy
Linearity: = < 0.3% of Full Scale.*
Proportional band
The proportional band is preset at 10% of Full Scale.*
Fail safe operation
If the P31P / P32P unit has an 0 or A in the 12th digit of
the model number
When the supply voltage drops, the electronic control
reverts to the fail safe mode. The last known output
pressure is maintained at approximately the same
level depending upon air consumption. The digital
display indicates the last known pressure setting.
When the supply voltage is reinstated to the correct
level, the valve moves from the fail safe mode and the
output pressure immediately follows the control signal
requirement. The display indicates the actual output
pressure.
Note: In the event of loss of both power and inlet
pressure the unit will exhaust downstream pressure.
If the P31P / P32P unit has an E in the 12th digit of the
model number
When the supply voltage drops, the electronic control
reverts to Forced Exhaust Mode and will automatically
exhaust the downstream (regulated) pressure.
When the supply voltage is reinstated to the correct level
the unit will return to normal operation and follows the
control signal requirement. The display indicates the
actual pressure.
If the unit has been programmed in manual mode (not with
a control signal) the unit will EXHAUST and the regulator will
need to be reset when power is applied.
Full exhaust
Complete exhaust of the regulator is defined as
P2 1% Full Scale
* Full scale (F.S.)
For 2 bar (29 psig) versions this will be 2 bar (29 psig), for the
10 bar (145 psig) version full scale will be 10 bar (145 psig).
Degree of protection
IP65
EU conformity
CE: standard
EMC: according to directive 89/336/EEC
The new pressure regulator is in accordance with:
EN 61000-6-1:2001
EN 61000-6-2:2001
EN 61000-6-3:2001
EN 61000-6-4:2001
These standards ensure that this unit meets the highest level of
EMC protection.
Mounting position
Preferably vertical, with the cable gland on top.
Materials: P31P & P32P
Magnet Core ................................................................. Steel
Solenoid Valve Poppet ................................................... FPM
Solenoid Valve Housing ................................Techno Polymer
Regulator Body (P31P & P32P versions) ................Aluminium
Regulator Top Housing .................................................Nylon
Valve Head ....................................................... Brass & NBR
Remaining Seals ............................................................ NBR
Filters
Coalescers
Regulators
P32P
25 msecs
55 msecs
70 msecs
80 msecs
35 msecs
135 msecs
85 msecs
225 msecs
Filter /
Regulators
Lubricators
Settings
The regulator is pre-set at the factory. If required, adjustments
can be made.
Flow Charts
P31P Regulator 1/4 Ports
Accessories
120
100
80
60
40
20
10
140
9
Secondary Pressure - bar
Combos
P31P
2 to 4 bar
1 to 6 bar
4 to 2 bar
6 to 1 bar
8
7
6
5
4
3
2
1
10
10
20
15
20
Flow - dm3/s
30
40
Flow - (scfm)
25
50
30
60
35
70
B54
140
120
100
80
60
40
20
0
10
9
Secondary Pressure - bar
Introduction
Response time
Catalog 0700P-E
8
7
6
5
4
3
2
1
0
10
20
20
40
30
60
40
80
50
60
Flow - dm3/s
70
100
120
140
Flow - (scfm)
80
160
90
180
100
200
Catalog 0700P-E
B
Introduction
Combos
Pressing the Accept key acc for more than 3 seconds, will
activate parameter change mode. The user can then select
the parameters by pressing up or down key. (display will show
Pxx). When parameter number is correct, pressing accept
again will enter parameter number.(display will show parameter
value).
Pressing the up or down key will change the parameter itself.
(display will flash indicating parameter editing mode). Pressing
the accept key will accept the new parameter value. (all digits
will flash whilst being accepted).
After releasing all keys , the next parameter number will be
presented on the display. (you may step to the next parameter).
When no key is pressed, after 3 seconds the display will show
the actual output pressure.
Filters
Coalescers
Press
Regulators
or
3-6 seconds
Flashing Decimal
Flashing
Displays current
parameter value.
Edits parameter.
3 = standard
factory settings.
If other than 3,
use Up or Down
Arrow and
accept 3
Accepts and
saves new
parameter
setting.
Description
Accesses
changeable
parameters.
Accesses
parameter no. 0.
Lubricators
Flashing Decimal
Filter /
Regulators
Until Display
Reads
Sequences to
next parameter.
Press
or
or
3-6 seconds
Until Display
Reads
Flashing Decimal
Description
Accesses
changeable
parameters.
Accesses
parameter no. 4.
Displays current
parameter value.
1=V
0 = mA
B55
Flashing Decimal
Flashing
Edits parameter.
Accepts and
saves new
parameter
setting.
Sequences to
next parameter.
Accessories
or
Catalog 0700P-E
Introduction
Combos
Filters
Press
or
or
3-6 seconds
Coalescers
Until Display
Reads
Regulators
Flashing Decimal
Description
Filter /
Regulators
Accesses
changeable
parameters.
Accesses
parameter no. 6.
Flashing Decimal
(Value 0, 1 or 2)
Displays current
parameter value.
Edits parameter.
1 = m factory
0 = digital
(NPN or PNP)
default for P3H
with analog
1 = analog 0..10V
2 = analog 4..20 mA
options
Flashing
Accepts and
saves new
parameter
setting.
Sequences to
next parameter.
Lubricators
Accessories
Set value is a % of Full Analog range. As an example for a 0-10V output signal, the original factory setting of 100% will give you an
adjustment of 0-10V. If you reset Parameter 8 to 50%, the new output range would be 0-5V or 50% of the full range.
In the event that the output signal is to low, in a certain application, you can adjust it by increasing Parameter 8 to a maximum value of
130% of scale.
Note that all values are nominal and that an actual measurement may be required to ensure signal strength.
Press
or
or
3-6 seconds
Until Display
Reads
Flashing Decimal
(For 2 bar versions
value = 92)
Description
Accesses
changeable
parameters.
Accesses
parameter no. 8.
Displays current
parameter value.
B56
Flashing Decimal
(Value between
0 and 130)
Flashing
Edits parameter.
Sequences to
next parameter.
Catalog 0700P-E
If necessary, adjustments can be made to the digital display when using an external pressure sensor.
Press
or
Introduction
or
3-6 seconds
Combos
Until Display
Reads
Flashing Decimal
Flashing
Displays current
digital display
Use up or down
arrows and
accept to adjust
the display
value if using an
external pressure
sensor.
Accepts and
saves new
parameter
setting.
Description
Accesses
parameter no. 9.
Sequences to
next parameter.
Accessories
Lubricators
Filter /
Regulators
Regulators
Accesses
changeable
parameters.
Filters
Flashing Decimal
Coalescers
Step
Press
or
or
3-6 seconds
Until Display
Reads
Flashing Decimal
Description
Accesses
changeable
parameters.
Accesses
parameter no. 14.
Displays current
parameter value.
1 = psig
0 = bar
2 = MPA
B57
Flashing Decimal
Flashing
Edits parameter.
Accepts and
saves new
parameter
setting.
Sequences to
next parameter.
Catalog 0700P-E
If there is a need for a pre-set Minimum pressure, use parameter 18. (Note: preset pressure is affected by % P19.)
Step
Press
or
or
Introduction
3-6 seconds
Combos
Until Display
Reads
Flashing Decimal
Filters
Coalescers
Flashing
Edits parameter.
Accepts and
saves new
parameter
setting.
Displays current
parameter value.
Incremental
value is:
2 bar unit:
x 2 mbar x % P19
Description
Accesses
changeable
parameters.
Flashing Decimal
(value between
0 and 200)
10 bar unit:
Accesses
parameter no. 18. x 10 mbar x % P19
Sequences to
next parameter.
Regulators
Filter /
Regulators
Lubricators
Example: If F.S. is 10 bar, set parameter 19 to 50 for Maximum preset pressure of 5 bar.
Pressure correction also affects the Minimum preset pressure in parameter 18.
Example: If F.S. is 10 bar and parameter 18 is set to a value of 100 (1 bar), and parameter 19 is set to 50%, then the actual Minimum preset
pressure seen is 0.5 bar.
Accessories
Press
or
or
3-6 seconds
Until Display
Reads
Flashing Decimal
Description
Accesses
changeable
parameters.
Accesses
parameter no. 19.
Displays current
parameter value.
Incremental
value is:
% of F.S.
B58
Flashing Decimal
(value between
0 and 100)
Flashing
Edits parameter.
Accepts and
saves new
parameter
setting.
Sequences to
next parameter.
Catalog 0700P-E
The regulation speed of the pressure regulator can be modified by means of one parameter. (P 20)
The value in this parameter has a range from 0-5. A higher value indicates slower regulation speed, but will be more stable.
or
Introduction
Press
or
Combos
3-6 seconds
Displays current
parameter value.
Edits parameter
0 = custom set*
1 = fastest (narrow
proportional band)
2 = fast
3 = normal
4 = slow
5 = slowest
(proportional
band is broad)
Accepts and
saves new
parameter
setting.
Description
Accesses
changeable
parameters.
Accesses
parameter no. 20.
Coalescers
Flashing
Sequences to
next parameter.
Fine Settings
Set Proportional Band
Proportional band is used for setting the reaction sensitivity of the regulator. The displayed value is X 10 mbar and has a range between 50
(0.5 bar) and 250 (2.5 bar).
Press
or
or
3-6 seconds
Until Display
Reads
Flashing Decimal
Description
Accesses
changeable
parameters.
Accesses
parameter no. 12.
Displays current
parameter value.
Incremental
value is:
x 10 mbar
B59
Flashing Decimal
(value between
50 and 250)
Flashing
Edits parameter.
Accepts and
saves new
parameter
setting.
Sequences to
next parameter.
Accessories
Lubricators
Filter /
Regulators
* When the value 0 is entered, you are able to create your own custom settings true parameters 12, 13 and 21.
Regulators
Flashing Decimal
Flashing Decimal
(value between
0 and 5)
Filters
Until Display
Reads
Catalog 0700P-E
Deadband is the Minimum limit of accuracy at which the regulator is set for normal operation. The displayed value is X 10 mbar and has a range
between 4 (40 mbar) and 40 (400 mbar).
Step
Press
or
or
Introduction
3-6 seconds
Combos
Until Display
Reads
Flashing Decimal
Filters
Description
Accesses
changeable
parameters.
Accesses
parameter no. 13.
Displays current
parameter value.
Incremental
value is
x 10 mbar
Flashing Decimal
(value between
4 and 40)
Edits parameter.
Flashing
Coalescers
Proportional Effect
Regulators
Step
Press
or
or
Filter /
Regulators
3-6 seconds
Lubricators
Until Display
Reads
Accessories
Description
Accesses
changeable
parameters.
Accesses
parameter no. 21.
Flashing Decimal
Flashing Decimal
(value between
5 and 100)
Flashing
Displays current
parameter value.
Edits parameter.
5 = fastest
regulation
100 = slowest
regulation.
Accepts and
saves new
parameter
setting.
Sequences to
next parameter.
Press
or
3-6 seconds
Until Display
Reads
Flashing Decimal
Description
Accesses
changeable
parameters.
Accesses
parameter no. 39.
Displays current
parameter value.
XXX = current
software version
B60
P31P
P32P
Catalog 0700P-E
4 pin M12
Connector
14.3
(0.56)
4 pin M12
Connector
105.3
(4.16)
175.7
(6.94)
89
(3.51)
126.25
(4.99)
64.4
(2.54)
Introduction
Combos
14.3
(0.56)
20
(0.79)
40
(1.58)
28.5
(1.12)
28.6
(1.13)
75
(2.96)
57.2
(2.26)
37.5
(1.48)
20
(0.79)
Coalescers
57
(2.25)
Filters
37.25
(1.47)
Regulators
28.6
(1.13)
7
(0.28)
15
(0.59) 25
(0.98)
30
(1.18)
Filter /
Regulators
Lubricators
7
(0.28)
L-Bracket
15
(0.59) 25
(0.98)
7
(0.28)
30
(1.18)
30
(1.18)
36
(1.42)
15
(0.59)
36
(1.42)
45
(1.77)
15
(0.59)
Foot Bracket
Foot Bracket
12
(0.47)
26
(1.02)
52
(2.05)
56
(2.20)
56
(2.20)
12
(0.47)
26
(1.02)
52
(2.05)
7
(0.28)
4 holes
52 40
(2.05)(1.57)
10
(0.39)
52
40
(2.05) (1.57)
84
(3.31)
100
(3.94)
7
(0.28)
4 holes
84
(3.31)
100
(3.94)
B61
Accessories
L-Bracket
Symbol
Catalog 0700P-E
B
Introduction
Combos
Filters
Coalescers
Regulators
Options:
Filter /
Regulators
P31T
A 9 2 S G N
Lubricators
Accessories
Body size
Engr level
Soft start /
dump valve (1/4")
Soft start /
dump valve (1/2")
Current
P31T
P32T
Note:
P32 unit used for both
P32 & P33 series
Bold items are most common.
Port
size
Thread type
Pilot type
1
2
9
P
S
C
A
Port size
Description
Solenoid voltage
2CN 24VDC non locking manual overide
3GN 120VAC non locking manual overide
120VAC non locking manual override
1FN
(P31 series only)
Actuator interface
G 15mm solenoid (P31 only)
C
30mm solenoid
P
Threaded air pilot
BSPP
BSPT
NPT
C 2CN
Order code
Flow
dm3/s (scfm)
Max.
bar (psig)
Solenoid type
15mm (P31 series only)
30mm CNOMO coil (P32 only)
30mm CNOMO coil
(M12 connection) (P32 only)
Height
Width
Depth
mm (inches) mm (inches) mm (inches)
Weight
1/4"
P31TA92SGNC1FN
17 (36)
10 (150)
115.6 (4.5)
57 (2.2)
40 (1.5)
0.37kg (0.8lbs)
1/4"
P31TA92SGNC2CN
17 (36)
10 (150)
166 (6.5)
57 (2.2)
40 (1.5)
0.41kg (0.9lbs)
1/4"
P31TA92PPN
17 (36)
17 (250)
115.6 (4.5)
57 (2.2)
40 (1.5)
0.37kg (0.8lbs)
1/2"
P32TA94SCNA3GN
46 (97)
10 (150)
162.5
(6.3)
88 (3.4)
57.2 (2.2)
0.87kg (1.9lbs)
1/2"
P32TA94SCNA2CN
46 (97)
10 (150)
227.5 (8.9)
88 (3.4)
57.2 (2.2)
0.91kg (2.0lbs)
1/2"
P32TA94PPN
46 (97)
17 (250)
162.5 (6.3)
75 (2.9)
57.2 (2.2)
0.87kg (1.9lbs)
Includes exhaust silencer. Flow with 6.3 bar (91.3) psig) inlet and 1 bar (14.5 psig) pressure drop.
Standard part numbers shown in bold. For other models refer to Options chart above.
B62
Technical Information
Flow Charts
-10C to 50C
(14F to 122F)
-20C to 80C
(-4F to 176F)
1/8"
Exhaust port:
100
80
60
40
20
4.0 bar
58 psig
2.5 bar
36.3 psig
2
1
0
10
15
20
25
30
35
Flow - dm3/s
17 dm /s (36 scfm)
48 dm3/s (101 scfm)
* Air supply must be dry enough to avoid ice formation at temperatures below +2C
Snap pressure: Full flow when downstream pressure reaches 50% of the inlet pressure
Polyester
Nitrile NBR
Mounting Brackets
P3HKA00ML
P3HKA00MC
80
60
40
20
0
Order code
P31T
45
60
80
Flow - (scfm)
50
55
100
60
120
Filters
7
6
6.3 bar
91.4 psig
5
4
3
4.0 bar
58 psig
2.5 bar
36.3 psig
2
1
0
20
40
40
80
60
80
Flow - dm3/s
120
160
Flow - (scfm)
100
200
120 130
240
Filter /
Regulators
Description
100
Aluminum
Seals:
40
40
Material Specifications
Body cover:
20
Body:
6.3 bar
6.0 bar 91.4 psig
87 psig
8.0 bar
116 psig
Coalescers
P31T
P32T
Note:
For solenoid operators and cable plugs (connectors) see pages 68 to 69.
P31T
P32T
73
(2.87)
Accessories
174.5
(6.87)
136
(5.35)
166
(6.53)
37
(1.45)
Lubricators
Dimensions mm (inches)
Regulators
Introduction
Compressed air
10 bar (150 psig)
Fluid:
Max. pressure solenoid operated:
Combos
(Revised 09-16-13)
Catalog 0700P-E
227.3
(8.95)
84
(3.30)
109.5
(4.31)
64.5
(2.53)
30.5
(1.20)
53
(2.08)
4
40
(1.57)
(0.15)
57
(2.24)
6
(0.23)
57.2
(2.25)
24
(0.94)
1
2
3
B63
Start signal
Switching time delay
Gradual pressure build up
Operating pressure p2 (=p1)
75
(2.95)
26
(1.02)
Dump Valve
Symbol
Catalog 0700P-E
Introduction
Combos
Filters
Coalescers
Regulators
Options:
Solenoid type only
Filter /
Regulators
P31D
A 9 2 S G N
Lubricators
Body size
Engr level
Current
Pilot type
Accessories
Thread type
Note:
P32 unit used for both
P32 & P33 series
Bold items are most common.
Port
size
P
S
1
2
9
C
A
Port size
Description
Solenoid voltage
2CN 24VDC non locking manual overide
3GN 120VAC non locking manual overide
120VAC non locking manual override
1FN
(P31 series only)
Actuator interface
G 15mm solenoid (P31 only)
C
30mm solenoid
BSPP
BSPT
NPT
C 2CN
Order code
Flow
dm3/s (scfm)
Max.
bar (psig)
Solenoid type
15mm (P31 series only)
30mm CNOMO coil (P32 only)
30mm CNOMO coil
(M12 connection) (P32 only)
Height
Width
Depth
mm (inches) mm (inches) mm (inches)
Weight
1/4"
P31DA92SGNC1FN
17 (36)
10 (150)
115.6 (4.5)
57 (2.2)
40 (1.5)
0.37kg (0.8lbs)
1/4"
P31DA92SGNC2CN
17 (36)
10 (150)
166 (6.5)
57 (2.2)
40 (1.5)
0.41kg (0.9lbs)
1/4"
P31DA92PPN
17 (36)
17 (250)
115.6 (4.5)
57 (2.2)
40 (1.5)
0.37kg (0.8lbs)
1/2"
P32DA94SCNA3GN
51 (108)
10 (150)
162.5
(6.3)
75 (2.9)
57.2 (2.2)
0.69kg (1.5lbs)
1/2"
P32DA94SCNA2CN
51 (108)
10 (150)
227.5 (8.9)
75 (2.9)
57.2 (2.2)
0.91kg (2.0lbs)
P32DA94PPN
17 (250)
162.5 (6.3)
75 (2.9)
57.2 (2.2)
0.87kg (1.9lbs)
1/2"
51 (108)
B64
Technical Information
Flow Charts
-10C to 50C
(14F to 122F)
-20C to 80C
(-4F to 176F)
1/8"
Exhaust port:
40
20
4.0 bar
58 psig
2.5 bar
36.3 psig
2
1
0
17 dm /s (36 scfm)
51 dm3/s (108 scfm)
10
15
20
25
30
35
Flow - dm3/s
Aluminum
Body cover:
Polyester
Seals:
Nitrile NBR
Mounting Brackets
Order code
P31D
P3HKA00ML
P3HKA00MC
100
80
60
40
20
0
40
45
60
80
Flow - (scfm)
50
55
100
60
120
7
6
6.3 bar
91.4 psig
5
4
3
4.0 bar
58 psig
2.5 bar
36.3 psig
2
1
0
20
40
40
80
60
80
Flow - dm3/s
120
160
Flow - (scfm)
100
200
120 130
240
Filter /
Regulators
Description
L-bracket mounting kit
40
Body:
20
Material Specifications
6.3 bar
6.0 bar 91.4 psig
87 psig
* Air supply must be dry enough to avoid ice formation at temperatures below +2C
Snap pressure: Full flow when downstream pressure reaches 50% of the inlet pressure
60
8.0 bar
116 psig
P31D
P32D
80
100
Introduction
Combos
Filters
Coalescers
Compressed air
10 bar (150 psig)
Fluid:
Max. pressure solenoid operated:
Regulators
(Revised 09-16-13)
Catalog 0700P-E
Note:
For solenoid operators and cable plugs (connectors) see pages 68 to 69.
P32D
73
(2.87)
Accessories
P31D
Lubricators
Dimensions mm (inches)
136
166 (5.35)
(6.53)
84
(3.30)
174.5
(6.87)
37
(1.45)
227.3
(8.95)
109.5
(4.31)
64.5
(2.53)
30.5
(1.20)
4
40
(1.57)
(0.15)
57
(2.24)
53
(2.08)
24
(0.94)
6
(0.23)
57.2
(2.25)
75
(2.95)
B65
26
(1.02)
Symbol
Catalog 0700P-E
Introduction
Combos
High flow
Filters
Coalescers
Parker Global Series Soft Start Valves, provide for the safe
introduction of pressure to machines or systems. Soft Start
Valves, allow the pressure to gradually build to the set point
before fully opening to deliver full flow at line pressure.
Options:
Regulators
P31S
Filter /
Regulators
Engr level
Body size
Soft start (1/4")
Soft start (1/2")
A 9 2 S G N
P31S
P32S
Current
Lubricators
Thread type
Accessories
Note:
P32 unit used for both
P32 & P33 series
Bold items are most common.
Port
size
1
2
9
Port size
Global modular mini (1/4")
2
Global modular compact (1/2") 4
Description
Solenoid voltage
2CN 24VDC non locking manual overide
3GN 120VAC non locking manual overide
120VAC non locking manual override
1FN
(P31 series only)
Actuator interface
0
Internal Pilot
G 15mm solenoid (P31 only)
C
30mm solenoid
P*
Threaded air pilot
BSPP
BSPT
NPT
C 2CN
Pilot type
P
S
Y
C
A
Order code
Flow
dm3/s (scfm)
Max.
bar (psig)
Solenoid type
15mm (P31 series only)
30mm CNOMO coil (P32 only)
30mm CNOMO coil
(M12 connection) (P32 only)
Height
Width
Depth
mm (inches) mm (inches) mm (inches)
Weight
1/4"
P31SA92SGNC1FN
17 (36)
10 (150)
115.6 (4.5)
57 (2.2)
40 (1.5)
0.37kg (0.8lbs)
1/4"
P31SA92SGNC2CN
17 (36)
10 (150)
166.0 (6.5)
57 (2.2)
40 (1.5)
0.41kg (0.9lbs)
1/4"
P31SA92Y0N
17 (36)
17 (250)
115.6 (4.5)
57 (2.2)
40 (1.5)
0.37kg (0.8lbs)
1/4"
P31SA92PPN
17 (36)
17 (250)
115.6 (4.5)
57 (2.2)
40 (1.5)
0.37kg (0.8lbs)
1/2"
P32SA94SCNA3GN
48 (101)
10 (150)
162.5 (6.3)
88 (3.4)
57.2 (2.28)
0.87kg (1.5lbs)
1/2"
P32SA94SCNA2CN
48 (101)
10 (150)
227.5 (8.9)
88 (3.4)
57.2 (2.28)
0.90kg (2.0lbs)
1/2"
P32SA94Y0N
48 (101)
17 (250)
162.5 (6.3)
75 (2.9)
57.2 (2.28)
0.90kg (2.0lbs)
1/2"
P32SA94PPN
48 (101)
17 (250)
162.5 (6.3)
75 (2.9)
57.2 (2.28)
0.87kg (1.5lbs)
Standard part numbers shown in bold. For other models refer to Options chart above.
B66
Technical Information
Flow Charts
-10C to 50C
(14F to 122F)
-20C to 80C
(-4F to 176F)
1/8"
80
60
40
20
4.0 bar
58 psig
2.5 bar
36.3 psig
2
1
0
Polyester
Seals:
Nitrile NBR
Mounting Brackets
Order code
P31S
P3HKA00ML
P3HKA00MC
20
15
20
25
30
35
Flow - dm3/s
40
40
45
60
80
Flow - (scfm)
50
55
100
120
80
60
40
20
0
7
6
6.3 bar
91.4 psig
5
4
3
4.0 bar
58 psig
2.5 bar
36.3 psig
2
1
0
20
40
40
80
60
80
Flow - dm3/s
120
160
Flow - (scfm)
100
200
120 130
240
Note:
For solenoid operators and cable plugs (connectors) see pages 68 to 69.
Dimensions mm (inches)
P31S
P32S
5
88
(3.46)
Accessories
60
Filter /
Regulators
Description
L-bracket mounting kit
100
Aluminum
Body cover:
10
Material Specifications
Body:
* Air supply must be dry enough to avoid ice formation at temperatures below +2C
Snap pressure: Full flow when downstream pressure reaches 50% of the inlet pressure
6.3 bar
6.0 bar 91.4 psig
87 psig
8.0 bar
116 psig
Coalescers
P31S
P32S
100
Lubricators
Introduction
Combos
Filters
Compressed air
10 bar (150 psig)
Fluid:
Max. pressure solenoid operated:
Regulators
(Revised 09-16-13)
Catalog 0700P-E
166
(6.53)
37
(1.45)
174.5
(6.87)
136
(5.35)
109.5
(4.31)
64.5
(2.53)
40
(1.57)
57.2
(2.25)
57
(2.24)
1
2
3
B67
Start signal
Switching time delay
Gradual pressure build up
Operating pressure p2 (=p1)
75
(2.95)
P33T Series
(Revised 05-19-14)
Catalog 0700P-E
3
1
Introduction
Combos
Filters
P33T Schematic
Coalescers
Pressure
Switch
Exh.
Regulators
Filter /
Regulators
Lubricators
Exh.
Reset
port
1
2
Accessories
Options:
P33T A 9
Body size
Standard
6 R
Port size
P33T
3/4"
Thread type
BSPP
NPT
1
9
Port size
G 4
Solenoid
Voltage
15mm Solenoid G
24VDC with
manual override
Mounting
Solenoid pilot R
+ gauge
Cat 4 w/bracket 4
1 to 2
2 to 3
Height
mm (inches)
Width
mm (inches)
Depth
mm (inches)
w/o transducer
3.7
8.5
273.8 (10.78)
136.0 (5.35)
w/ transducer
3.7
8.5
273.8 (10.78)
136.0 (5.35)
Inlet
Outlet
Transducer
3/4
3/4
3/4
3/4
2CN
Operator
Type
Cv
2CN
Weight
kg (lb)
Part number*
147.6 (581)
7.3 (16.1)
P33TA96RG4F2CN
147.6 (581)
7.4 (16.3)
P33TA96RG4G2CN
* NPT port threads. For BSPP threads , replace 9 in the part number with a 1.
B68
P33T Series
(Revised 05-15-14)
Catalog 0700P-E
Pilot Solenoids:
Enclosure rating:
Connector socket:
Description
Part number
Black grill
1834C05-001
Standard voltages:
24VDC
Ambient temperature:
Media temperature:
Flow media:
Inlet pressure:
Mounting orientation:
Port threads:
Control reliable:
1227A30-001
1232H30-001
P32KA00MT
P32KA00MB
5500A5013
Silencer(s) 3/4"
1527B7916-001
Valve Wiring
BROWN 1
(+24 Volts DC)
2 WHITE
(N.O. Status
Contact)
BLACK 4
(N.C. Status
Contact)
3 BLUE
(Common)
WHITE 2
(Sol 2)
5 GRAY
Reset
1 BROWN
(+24 Volts DC)
4 BLACK
(Sol 1)
BLUE 3
(Common)
Filter /
Regulators
5 GRAY
(Equip Ground)
2 Digital
Output Signal
Analog 4
Output Signal
Lubricators
5-Pin A Code
Male Connector
(Control Signal)
5-Pin A Code
Female Connector
(Feedback)
3 Digital
Output 2 Signal
Accessories
Dimensions mm (inches)
100%
16.3
(.64)
1
2
0%
3
4
273.8
(10.78)
60%
Manual
Reset
STATUS
LED
Status
Lights
9.5
(0.375) 8.6
(0.34)
6.4
(0.25)
46.2
(1.82)
145.5
(5.73)
Adjustable
Soft Start
41.3 (1.63)
136.0 (5.35)
Start signal
Switching time delay
Gradual pressure build up
Operating pressure p2 (=p1)
Outlet
Inlet
Introduction
M12, 5-pin
Combos
Filters
Enclosure rating:
Electrical connection:
Coalescers
1.2 Watts on DC
Cables
M12, 5-pin female to flying lead cable,
TPE; 2 m (6.6 ft)..................................................... RKC 4.5-2/S1587
M12, 5-pin male to flying lead cable,
TPE; 2 m (6.6 ft)......................................................RSC 4.5-2/S1587
Regulators
P32KA00CB
Body connector
11.1
(0.44)
147.6 (5.81)
81.3 (3.2)
76.2 (3.0)
8X
R 0.13
R
0.063 76.2
90
(3.0)
76.2 (3.0)
98.4 (3.875)
B69
P33T Series
(Revised 05-15-14)
Catalog 0700P-E
B
Introduction
ADJUSTING NEEDLE
EXHAUST
OUTLET
Combos
INLET
Filters
STATUS
Coalescers
Valve Actuated:
Regulators
Filter /
Regulators
Lubricators
ADJUSTING NEEDLE
EXHAUST
OUTLET
INLET
Accessories
STATUS
60%
0%
1
2
3
4
Start signal
Switching time delay
Gradual pressure build up
Operating pressure p2 (=p1)
B70
P33T Series
(Revised 05-15-14)
Catalog 0700P-E
ADJUSTING NEEDLE
Introduction
EXHAUST
OUTLET
Coalescers
Filters
Combos
INLET
ADJUSTING NEEDLE
EXHAUST
OUTLET
INLET
Inlet
STATUS
STATUS
B71
Filter /
Regulators
Lubricators
STATUS
Accessories
Regulators
Catalog 0700P-E
Transients
NC Normal Operator
with 30 x 30
standard coil
Working pressure
0 to 10 bar
0 to 10 bar
Ambient
temperature
-10C to 60C *
-10C to 60C *
B
Introduction
Power (DC)
4.8W
2.7W
Power (AC)
8.5VA
4.9VA
Combos
Voltage tolerance
+/-10%
+/-10%
Duty cycle
100%
100%
Materials
Filters
Insulation class
Electric connection
B Industrial
DIN 43650A
Protection
IP65
IP65
Approval
Working media
Pilot Valve
UL/CSA
All neutral media such as compressed air
Coalescers
Body:
Polyamide
Armature tube:
Brass
Seals:
Fluorocarbon
Screws:
Stainless steel
Regulators
Coil
Encapsualtion material:
Filter /
Regulators
Order code
Weight
(Kg)
P2FC6449
0.065
Thermoplastic as standard
Duroplast for M12 connection
Direct current
24VDC
Lubricators
Accessories
Description
Order code
non-lock
manual
override
Weight
(Kg)
Standard Duty
P2FP23N4B
0.065
No Override
P2FP23N4A
0.065
Note: Solenoid pilot operators are fitted to the Global range. Order the
above part numbers for spares. The operators are supplied with
mounting screws and interface O rings. Coils and connectors must
be ordered separately.
Voltage
22mm x 30mm
Order code
B industrial
standard
Weight
(Kg)
30mm x 30mm
Order code
DIN 43650A
standard
Weight
(Kg)
P2FCB449
0.093
P2FCA449
0.105
P2FCB453
0.093
P2FCA453
0.105
Direct current
24VDC
Alternative current
110V 50Hz, 120V 60Hz
B72
Catalog 0700P-E
PS2429BP
PS2028BP
PS243079BP
PS203279BP
PS243083BP
PS203283BP
PS2429JBP
PS2028JCP
PS2430J79BP
PS2032J79CP
PS2430J83BP
PS2032J83CP
Combos
With cable
Order code
30mm Form A
DIN 43650A
Introduction
Description
Order code
22mm Form B
Industrial
Electrical schematics
Filters
30 x 30mm
31
(1.22)
60
(2.36)
48
(1.89)
36
(1.42)
22
51 (.87)
(2.01)
31
(1.22)
60
(2.36)
22
52 (.87)
(2.05)
PS243079BP
PS203279BP
PS2430J79BP
PS2032J79CP
PS243083BP
PS203283BP
PS2430J83BP
PS2032J83CP
PS294679BP
PS294683BP
PS2946J79BP
PS2946J83BP
Lubricators
31
(1.22)
30
(1.18)
5.5
(.22)
Accessories
PS2429BP
42
(1.65)
47.5
(1.87)
31
(1.22)
30
(1.18) 32
(1.26)
20.8
(.82)
M3
B73
31
(1.22)
Regulators
33
(1.30)
Filter /
Regulators
41
45 (1.61)
(1.77)
Coalescers
30
(1.18)
30 22
(1.18) (.86)
5
(.20)
Symbol
Catalog 0700P-E
Features
Introduction
Combos
Filters
Ordering Information
Coalescers
Model
type
Port
size
Thread
type
Flow
3
dm /s (scfm)
P31
1/4"
NPT
47.2 (100)
P31VA92LSAN
P32
Regulators
P33
1/4"
NPT
66.5 (141)
P32VA92LSAN
P32VA92LSBN
3/8"
NPT
101.9 (216)
P32VA93LSAN
P32VA93LSBN
1/2"
NPT
128.4 (272)
P32VA94LSAN
P32VA94LSBN
1/2"
NPT
136.9 (290)
P33VA94LSAN
P33VA94LSBN
3/4"
NPT
141.6 (300)
P33VA96LSAN
P33VA96LSBN
Filter /
Regulators
BSPP 1
BSPT 2
NPT 9
Specifications
Material Specifications
Lubricators
Body
Zinc
Blade
Acetal
Seals
Nitrile
Operating temperature
Port size
Accessories
P31:
P32:
P33:
Weight
Dimensions mm (inches)
P31
P32
49
(1.91)
80
(3.16)
42.7
(1.68)
21.3
(0.84)
40
(1.58)
20
(0.79)
30.7
(1.21)
61.2
(2.41)
P33
50
(1.96)
80
(3.14)
26
(1.03)
60
58
(2.28) (2.36)
26
(1.02)
65
58
(2.58)
(2.28)
33
(1.29)
30
(1.18)
62.5
(2.46)
41.4
(1.63)
24.5
(0.97)
80
(3.19)
49
(1.93)
51
(2.02)
B74
86
(3.41) 54
(2.13)
29
(1.14) 58
(2.28)
Symbol
Features
The Ball / Lockout Valve shuts off downstream line pressure
in the closed position with a 90turn of the handle. In the
closed position, inlet air pressure is blocked and downstream
/ system air is exhausted through a threaded port. To prevent
unauthorized adjustment, the padlock slide may be assembled
on either side. It is recommended that this slide is installed
after final system assembly.
Note: This padlock slide is a permanent assembly and may not be
removed later, any unauthorized tampering will void any
warranty claims. The valve can only be locked in the closed
position.
Port
size
Exhaust
port
Thread
type
Flow
3
dm /s (scfm)
P31
1/4"
1/4"
NPT
20 (42.4)
P31VA92LBNN
P32
3/8"
1/4"
NPT
90 (190.7)
P32VA93LBNN
Operating temperature
P32VA94LBNN
P31:
P32:
P33:
NPT
122 (258.5)
1/2"
1/2"
NPT
265 (561.5)
P33VA94LBNN
Port size
3/4"
1/2"
NPT
320 (678)
P33VA96LBNN
Weight
BSPP 1
BSPT 2
NPT 9
Filter /
Regulators
P33
1/4"
Specifications
Material Specifications
Body
Aluminum
PTFE
Ball
P31
P32 / P33
Lubricators
Seals
Brass
Accessories
Dimensions mm (inches)
P31
P32
P33
73
(2.87)
60
(2.36)
36.5
(1.43)
30
(1.18)
42
(1.65)
36.5
(1.43)
30
(1.18)
98.4
(3.87)
88
(3.46)
71.4
(2.81)
21.4
(0.84)
82.6
(3.25)
73
(2.87)
50
(1.96)
21
(0.82)
73
(2.87)
60
(2.36)
20
(0.78)
40
(1.57)
Coalescers
1/2"
Filters
Model
type
Regulators
Ordering Information
B
Introduction
Combos
Catalog 0700P-E
25.4
(1.00)
B75
36.5
(1.44)
Manifold Blocks
Symbol
Catalog 0700P-E
B
Introduction
Features
Available in 1/4" or 3/4" threaded inlet / outlet ports
Two additional top and bottom auxiliary ports standard
Can be mounted anywhere in the FRL system
Combos
Ordering Information
Specifications
Filters
Coalescers
In / Out
port size
Auxiliary
port size
top
Auxilliary
port size
bottom
Thread
type
Order code
P31
1/4"
1/4"
1/4"
NPT
P31MA92022N
P32
1/2"
1/4"
1/2"
NPT
P32MA94024N
P33
3/4"
1/4"
1/2"
NPT
P33MA96024N
Model
type
Regulators
Operating temperature
Weight
P31:
P33:
BSPP 1
BSPT 2
NPT 9
Filter /
Regulators
Material Specifications
Body
Aluminum
Lubricators
Accessories
Dimensions mm (inches)
P31
P32
20
(0.79)
Inlet
Port
1/4"
41
(1.61)
FLOW
Outlet
Port
1/4"
40
(1.58)
40
(1.58)
19
(0.74)
42
(1.66)
Outlet Port
1/2"
Top Port
1/4"
Inlet Port
1/2"
Top &
Bottom
Aux. Ports
1/4"
23.9
(.94)
P33
73
(2.88)
Inlet Port
3/4"
36.5
(1.44)
60
(2.36)
47.8
(1.88)
30
(1.18)
47.8
(1.88)
Outlet Port
3/4"
Top Port
1/4"
33
(1.30)
66
(2.60)
23.9
(0.94) 47.8
(1.88)
23.9
(.94)
Bottom Port
1/2"
Bottom Port
1/2"
B76
P31 Series
Accessories
Catalog 0700P-E
P31KA00MW
68
(2.68)
42.5
(1.67)
10
(.39)
P31KA00MT
7
(.28)
10
(.39)
6.6
(.26)
5.5
(.22)
Introduction
35.5
(1.40)
19.3 Dia
(.76)
40
(1.57)
40
(1.57)
16
(.63)
10
(.39)
Body Connector
P31KA00CB
1/8
1/4
3/8
1/8
1/4
3/8
Filter /
Regulators
10
(.39)
NPT................. P31KA91CP
NPT ................ P31KA92CP
NPT................. P31KA93CP
BSPP............... P31KA11CP
BSPP............... P31KA12CP
BSPP............... P31KA13CP
Regulators
36
(1.42)
Angle Bracket
NPT..................P31KA91CN
NPT .................P31KA92CN
NPT..................P31KA93CN
BSPP................P31KA11CN
BSPP ...............P31KA12CN
BSPP................P31KA13CN
Accessories
Lubricators
24
(.94)
1/8
1/4
3/8
1/8
1/4
3/8
Coalescers
Filters
60
(2.36)
90
(3.54)
2
(.08)
Combos
62
(2.44)
P31KA00MR
68
(2.68)
44
(1.73)
30 Dia.
(1.18)
25
(.98)
40
(1.57)
B77
P32 Series
Accessories
Catalog 0700P-E
Body Connector
P32KA00MT
P32KA00CB
8.9
(.35)
8.9
(.35)
Introduction
O-Ring
O-Ring
O-Ring
22.1
Dia.
(.87)
Combos
22.1 Dia.
(.87)
Filters
Coalescers
Regulators
Angle Bracket
P32KA00MR
69.5
(2.74)
42
(1.65)
Filter /
Regulators
14
(.55)
11
(.43)
25
(98)
7.1
(.28)
51 Dia
(2.01)
69.5
(2.74)
Lubricators
40
(1.57)
40
(1.57)
Accessories
L-Bracket
T-Bracket
P32KA00ML
P32KA00MB
69.5
(2.74)
14
(.54)
9.6
(.38)
42
(1.66)
7.5 (Typ.)
(.29)
57 Dia
(2.25)
28
(1.10)
22
72 (.88)
(2.84)
19
(.75)
7.1
(.28)
25.4
115 (1.00)
(4.53)
32
(1.26)
7.0
(.28)
20
(.79 )
B78
P33 Series
Accessories
Catalog 0700P-E
Body Connector
P32KA00MT
P32KA00CB
8.9
(.35)
Introduction
8.9
(.35)
O-Ring
O-Ring
O-Ring
Filters
Combos
22.1
Dia.
(.87)
22.1 Dia.
(.87)
Angle Bracket
Coalescers
P33KA00MR
76
(2.99)
Regulators
48
(1.89)
14
(.55)
11
(.43)
25
(98)
61
(2.40)
61 Dia
(2.40)
84.5
(3.33)
Lubricators
49
(1.92)
Accessories
40
(1.57)
T-Bracket
L-Bracket
P33KA00ML
P32KA00MB
76
(3.00)
14
(.56)
9.6
(.38)
48
(1.88)
7.5 (Typ.)
(.29)
67.5 Dia
(2.66)
28
(1.10)
28
87 (1.10)
(3.44)
19
(.75)
7.1
(.28)
25.4
115 (1.00)
(4.53)
38
(1.49)
7.0
(.28)
20
(.79 )
B79
Filter /
Regulators
Dimensions
Catalog 0700P-E
Wire Configuration
Pin 1 - Common (Black)
Pin 2 - N.C. (Blue)
Pin 3 - N.O. (Red)
1.20
(30.5)
3 (Normally Open)
1
(Common)
1.50
(38.1)
2 (Normally Closed)
1
GND
Pin Configuration
Pin 1 - Common (Black)
Pin 2 - N.C. (Blue)
Pin 3 - N.O. (Red)
B
Introduction
2.50 Max.
(63.5)
Combos
18 Leads
2.30 Max.
(58.4)
1-1/8 Hex
1-1/8 Hex
1/8-27 NPT
1/4-18 NPTF
Filters
Field adjustable
Compact design
Easily customized
Quick delivery
Coalescers
NEMA 4, 13
Regulators
Operation
Filter /
Regulators
Specifications
Set point tolerance
Temperature range
Lubricators
Deadband
Current rating
3A @ 125 VAC
2A @ 30 VDC (Resistive)
Accessories
Cycle life
Circuit form
SPDT Standard
1 Million
Material Specifications
Adjustment knob
Options:
PPS1 - 1
Thread
1/4" NPT male
1/8" NPT male
1/4" BSPP male
1/8" BSPP male
Brass
Diaphragm
Nitrile
3 - R
HM
Set Point
Direction
R Rising
1
2
17
18
1
2
3
4
Circuit
SPDT
C
Note: Switch is field adjustable.
Anodized aluminum
Body
Range*
3-10 PSI
6-30 PSI
20-120 PSI
100-400 PSI
B80
Electrical
Connection
HM DIN 9.4mm
WL Wire leads 18"
P31
P32
P33
P31KA00MM
P32KA00MM
P33KA00MM
P31
P32
P33
5 Element Kit
P31KA00ESE
P32KA00ESE
P33KA00ESE
P31
P32
P33
1 Element Kit
P31KA00ES9
P32KA00ES9
P33KA00ES9
P31
P32
P33
P31KA00ESC
P32KA00ESC
P33KA00ESC
P31
P32
P33
P31KA00ESA
P32KA00ESA
P33KA00ESA
P32 / P33
P32KA00DA
B
Introduction
P31KA00MP
P32KA00MP
P33KA00MP
Combos
Filters
P31
P32
P33
Coalescers
Order code
Regulators
Description
Filter /
Regulators
Series
Lubricators
Accessories
Catalog 0700P-E
P31KA00RQ
P31
Differential Pressure Indicator Kit
P32KA00RQ
P32 / P33
P31
P32 / P33
P31KA00PL
P32KA00PL
P32KA00PH
P31
P32
P33
B81
P31KA00BGM
P32KA00BGM
P33KA00BGM
Catalog 0700P-E
Description
P31
P31KA00BGB
P32
P33
P32KA00BGA
P33KA00BGA
P31
P32
P33
P31KA00BMM
P32KA00BMM
P33KA00BMM
Combos
P31
P31KA00BMB
Filters
P32
P33
P32KA00BMA
P33KA00BMA
Coalescers
P32
P33
P32KA00BSM
P33KA00BSM
P32
P33
P32KA00BSA
P33KA00BSA
P31
P32
P33
P31KA00BGN
P32KA00BGN
P33KA00BGN
P31
P32
P33
P31KA00BMN
P32KA00BMN
P33KA00BMN
P32
P33
P32KB00BSN
P33KA00BSN
P31
P32
P33
P31KA00RB
P32KA00RB
P33KA00RB
P31
P32
P33
P31KA00RC
P32KA00RC
P33KA00RC
Order code
Introduction
Regulators
Filter /
Regulators
Lubricators
Accessories
B82
(Revised 05-13-14)
P31KA00PS
P32KA00PS
P33KA00PS
P31
P32
P33
P31KA00PT
P32KA00PT
P33KA00PT
P32
P33
P32KA00PV
P33KA00PV
P31
P31
P32 / P33
B
Introduction
P31
P32
P33
Combos
P31KA00PR
P32KA00PR
P33KA00PR
Filters
Square Flush
Mounting Gauge Kit
Order code
15
(.59)
K4511SCR04B
K4511SCR11B
K4511SCR060
K4511SCR160
0-4 bar
0-11 bar
0-60 psig
0-160 psig
0-60 psig / 0-4.1 bar
0-160 psig / 0-10 bar
1/8"
1/8"
K4510N18060
K4510N18160
1/8"
1/8"
1/8"
K4515N18030
K4515N18060
K4515N18160
1/4"
1/4"
1/4"
1/4"
K4520N14030
K4520N14060
K4520N14160
K4520N14300
1/4"
K4517N14160D
P32 / P33
P31
P32 / P33
P31KA00CY
P32KA00CY
P31
P32
P31KB00AT
P32KB00AT
B83
Coalescers
P31
P32
P33
P31
Connection
27
(1.06)
27
(1.06)
16
(.63)
16
(.63)
18
(.71)
32
(1.25)
19
(.75)
40
(1.57)
Regulators
Description
Filter /
Regulators
Series
25
(.98)
50
(1.97)
24
(.94)
Lubricators
Accessories
Catalog 0700P-E
Catalog 0700P-E
Safety Guide
1. GENERAL INSTRUCTIONS
1.1. Scope: This safety guide is designed to cover general guidelines on the installation, use, and maintenance of Pneumatic Division
Valves, FRLs (Filters, Pressure Regulators, and Lubricators), Vacuum products and related accessory
components.
1.2. Fail-Safe: Valves, FRLs, Vacuum products and their related components can and do fail without warning for many reasons. Design all
systems and equipment in a fail-safe mode, so that failure of associated valves, FRLs or Vacuum products will not endanger persons
or property.
1.3 Relevant International Standards: For a good guide to the application of a broad spectrum of pneumatic fluid power devices see:
ISO 4414:1998, Pneumatic Fluid Power General Rules Relating to Systems. See www.iso.org for ordering information.
1.4. Distribution: Provide a copy of this safety guide to each person that is responsible for selection, installation, or use of Valves, FRLs
or Vacuum products. Do not select, or use Parker valves, FRLs or vacuum products without thoroughly reading and understanding this
safety guide as well as the specific Parker publications for the products considered or selected.
1.5. User Responsibility: Due to the wide variety of operating conditions and applications for valves, FRLs, and vacuum products Parker
and its distributors do not represent or warrant that any particular valve, FRL or vacuum product is suitable for any specific end use
system. This safety guide does not analyze all technical parameters that must be considered in selecting a product. The user, through
its own analysis and testing, is solely responsible for:
Making the final selection of the appropriate valve, FRL, Vacuum component, or accessory.
Assuring that all users performance, endurance, maintenance, safety, and warning requirements are met and that the application
presents no health or safety hazards.
Complying with all existing warning labels and / or providing all appropriate health and safety warnings on the equipment on which
the valves, FRLs or Vacuum products are used; and,
Assuring compliance with all applicable government and industry standards.
1.6. Safety Devices: Safety devices should not be removed, or defeated.
1.7. Warning Labels: Warning labels should not be removed, painted over or otherwise obscured.
1.8. Additional Questions: Call the appropriate Parker technical service department if you have any questions or require any additional
information. See the Parker publication for the product being considered or used, or call 1-800-CPARKER, or go to www.parker.com,
for telephone numbers of the appropriate technical service department.
2. PRODUCT SELECTION INSTRUCTIONS
2.1. Flow Rate: The flow rate requirements of a system are frequently the primary consideration when designing any pneumatic system.
System components need to be able to provide adequate flow and pressure for the desired application.
2.2. Pressure Rating: Never exceed the rated pressure of a product. Consult product labeling, Pneumatic Division catalogs or the
instruction sheets supplied for maximum pressure ratings.
2.3. Temperature Rating: Never exceed the temperature rating of a product. Excessive heat can shorten the life expectancy of a product
and result in complete product failure.
2.4. Environment: Many environmental conditions can affect the integrity and suitability of a product for a given application. Pneumatic
Division products are designed for use in general purpose industrial applications. If these products are to be used in unusual
circumstances such as direct sunlight and/or corrosive or caustic environments, such use can shorten the useful life and lead to
premature failure of a product.
2.5. Lubrication and Compressor Carryover: Some modern synthetic oils can and will attack nitrile seals. If there is any possibility of
synthetic oils or greases migrating into the pneumatic components check for compatibility with the seal materials used. Consult the
factory or product literature for materials of construction.
2.6. Polycarbonate Bowls and Sight Glasses: To avoid potential polycarbonate bowl failures:
Do not locate polycarbonate bowls or sight glasses in areas where they could be subject to direct sunlight, impact blow, or
temperatures outside of the rated range.
Do not expose or clean polycarbonate bowls with detergents, chlorinated hydro-carbons, keytones, esters or certain alcohols.
Do not use polycarbonate bowls or sight glasses in air systems where compressors are lubricated with fire resistant fluids such as
phosphate ester and di-ester lubricants.
P10
Catalog 0700P-E
Safety Guide
2.7. Chemical Compatibility: For more information on plastic component chemical compatibility see Pneumatic Division technical bulletins
Tec-3, Tec-4, and Tec-5
2.8. Product Rupture: Product rupture can cause death, serious personal injury, and property damage.
Do not connect pressure regulators or other Pneumatic Division products to bottled gas cylinders.
Do not exceed the maximum primary pressure rating of any pressure regulator or any system component.
Consult product labeling or product literature for pressure rating limitations.
3. PRODUCT ASSEMBLY AND INSTALLATION INSTRUCTIONS
3.1. Component Inspection: Prior to assembly or installation a careful examination of the valves, FRLs or vacuum products must be
performed. All components must be checked for correct style, size, and catalog number. DO NOT use any component that displays any
signs of nonconformance.
3.2. Installation Instructions: Parker published Installation Instructions must be followed for installation of Parker valves, FRLs and
vacuum components. These instructions are provided with every Parker valve or FRL sold, or by calling 1-800-CPARKER, or at
www.parker.com.
3.3. Air Supply: The air supply or control medium supplied to Valves, FRLs and Vacuum components must be moisture-free if ambient
temperature can drop below freezing
4. VALVE AND FRL MAINTENANCE AND REPLACEMENT INSTRUCTIONS
4.1. Maintenance: Even with proper selection and installation, valve, FRL and vacuum products service life may be significantly reduced
without a continuing maintenance program. The severity of the application, risk potential from a component failure, and experience
with any known failures in the application or in similar applications should determine the frequency of inspections and the servicing or
replacement of Pneumatic Division products so that products are replaced before any failure occurs. A maintenance program must
be established and followed by the user and, at minimum, must include instructions 4.2 through 4.10.
4.2. Installation and Service Instructions: Before attempting to service or replace any worn or damaged parts consult the appropriate
Service Bulletin for the valve or FRL in question for the appropriate practices to service the unit in question. These Service and
Installation Instructions are provided with every Parker valve and FRL sold, or are available by calling 1-800-CPARKER, or by accessing
the Parker web site at www.parker.com.
4.3. Lockout / Tagout Procedures: Be sure to follow all required lockout and tagout procedures when servicing equipment. For more
information see: OSHA Standard 29 CFR, Part 1910.147, Appendix A, The Control of Hazardous Energy (Lockout / Tagout)
4.4. Visual Inspection: Any of the following conditions requires immediate system shut down and replacement of worn or damaged
components:
Air leakage: Look and listen to see if there are any signs of visual damage to any of the components in the system. Leakage is an
indication of worn or damaged components.
Damaged or degraded components: Look to see if there are any visible signs of wear or component degradation.
Kinked, crushed, or damaged hoses. Kinked hoses can result in restricted air flow and lead to unpredictable system behavior.
Any observed improper system or component function: Immediately shut down the system and correct malfunction.
Excessive dirt build-up: Dirt and clutter can mask potentially hazardous situations.
Caution: Leak detection solutions should be rinsed off after use.
4.5. Routine Maintenance Issues:
Remove excessive dirt, grime and clutter from work areas.
Make sure all required guards and shields are in place.
4.6. Functional Test: Before initiating automatic operation, operate the system manually to make sure all required functions operate
properly and safely.
4.7. Service or Replacement Intervals: It is the users responsibility to establish appropriate service intervals. Valves, FRLs and vacuum
products contain components that age, harden, wear, and otherwise deteriorate over time. Environmental conditions can significantly
accelerate this process. Valves, FRLs and vacuum components need to be serviced or replaced on routine intervals. Service intervals
need to be established based on:
Previous performance experiences.
Government and / or industrial standards.
When failures could result in unacceptable down time, equipment damage or personal injury risk.
4.8. Servicing or Replacing of any Worn or Damaged Parts: To avoid unpredictable system behavior that can cause death, personal
injury and property damage:
Follow all government, state and local safety and servicing practices prior to service including but not limited to all OSHA Lockout
Tagout procedures (OSHA Standard 29 CFR, Part 1910.147, Appendix A, The Control of Hazardous Energy Lockout / Tagout).
Disconnect electrical supply (when necessary) before installation, servicing, or conversion.
Disconnect air supply and depressurize all air lines connected to system and Pneumatic Division products before installation, service,
or conversion.
Installation, servicing, and / or conversion of these products must be performed by knowledgeable personnel who understand how
pneumatic products are to be applied.
After installation, servicing, or conversions air and electrical supplies (when necessary) should be connected and the product tested
for proper function and leakage. If audible leakage is present, or if the product does not operate properly, do not put product or
system into use.
Warnings and specifications on the product should not be covered or painted over. If masking is not possible, contact your local
representative for replacement labels.
4.9. Putting Serviced System Back into Operation: Follow the guidelines above and all relevant Installation and Maintenance Instructions
supplied with the valve FRL or vacuum component to insure proper function of the system.
P11
Catalog 0700P-E
Offer of Sale
The items described in this document and other documents and descriptions provided by Parker Hannifin Corporation, its subsidiaries and its authorized distributors
(Seller) are hereby offered for sale at prices to be established by Seller. This offer and its acceptance by any customer (Buyer) shall be governed by all of the following
Terms and Conditions. Buyers order for any item described in its document, when communicated to Seller verbally, or in writing, shall constitute acceptance of this offer.
All goods or work described will be referred to as Products.
P12