Beruflich Dokumente
Kultur Dokumente
General Information
Before You Begin
Before proceeding with the disassembly procedure, make sure that you do the following:
1. Turn off the power to the system and all peripherals.
2. Unplug the AC adapter and all power and signal cables from the system.
Disassembly Procedure
This section tells you how to disassemble the system when you need to perform system service.
CAUTION: Before you proceed, make sure you have turned off the system and all peripherals
connected to it.
2.2
Release the two latches shown bellow then remove the Memory.
4.2
5.2
5.3
Remove the two screws fixed in the WLAN mini PCI-E card.
5.4
Disconnect the main & aux antenna cable from the WLAN mini PCI-E card .
6.2
7.2
7.3
10
8.2
8.3
Remove the five screws fastening the main board to the chassis.
8.4
11
8.5
NOTE: Circuit boards >10 cm has been highlighted with the red rectangle as above image shows. Please
detach the Circuit boards and follow local regulations for disposal.
NOTE: RTC battery has been highlighted with the red circle as above image shows. Please detach the RTC
battery and follow local regulations for disposal.
12