Beruflich Dokumente
Kultur Dokumente
Bose PowerMatch PM8500 contain all solid-state circuitry, using MOSFET output
devices employing Class-D topology with both current and voltage feedback loop
circuits. The amplifier built and sold with the full-featured switch-mode power supply with
fast-tracking, power-factor correction circuits that will allow full-rated power from AC
outlets ranging from 100 240 V, 50/60 Hz. The PowerMatch PM8500 amplifier have
an IEC 320-C19 16/20-amp electrical power inlet and equipped with a removable power
supply cord. The Bose PM8500 amplifier include protection from shorted and open loads,
general overheating, DC, high-frequency overloads, under/over voltage and internal
faults. Bose PowerMatch PM8500/8500N is a configurable professional power
amplifier delivering concert sound quality for fixed installation sound reinforcement
systems. Building on the ruggedness proven by 20 years of experience building
amplifiers for the automotive market, the PM8500 adds numerous new Bose patented
technologies to simultaneously provide class-leading power, efficiency, sound quality and
reliability. Bose PowerMatch PM8500 that sold with a cheap wholesale or discount
prices has some of the best features.
New, patent-applied design combines Class-D efficiency with a dual-feedback circuit that
continuously monitors and controls both the current and voltage of the output devices.
This combination provides the PowerMatch amplifier with the highest-quality output
power, audio performance, reliability, and efficiency. Integrated audio DSP for
loudspeaker EQ, crossover, delay, and limiting. When used with RoomMatch and other
Bose loudspeakers, the presets provide all required signal processing with optimized
protection limiting of self-powered loudspeakers. Integrated audio DSP for loudspeaker
EQ, crossover, delay, and limiting. The amplifier include Digital Signal Processing
(DSP) optimized for loudspeaker processing, with 24-bit, 48 kHz operation. The total
latency (analog input to amplifier output) 0.95 msec. The fixed-block signal processing
include the following elements for each of the eight channels: 5-band parametric input
EQ, array LF/mid-band compensation EQ, bandpass (crossover) filters, 9-band
parametric output EQ, delay, output peak and RMS-average limiter. A matrix mixer
included for routing and attenuation of any input/output combination. A signal generator
supporting tone, noise and sweep functions included, which also enable the amplifier to
measure and record automated impedance sweeps on any output channel.
All that capability will make anyone would buy it to savor the ultimate in a particularly
outputs that can be configured as single, dual, or quad channel modes, which allows 4
kW of power to be allocated between 2 to 8 channels. These software-selectable
configurations range from 8 channels at 500 watts, 4 channels at 1000 watts, 2 channels
at 2000 watts, or mixed combinations. Dual or quad modes can drive either lowimpedance or 70 V or 100 V loads. The PowerMatch PM8500 amplifier have an IEC
320-C19 16/20-amp electrical power inlet and equipped with a removable power supply
cord models have USB for Bose ControlSpace Designer programming, with PM8500N
adding Ethernet network control and monitoring. PeakBank power supply
Regenerative 4-quadrant power supply with fast-tracking PFC supports high efficiency,
while improving the peak burst power for superior transient response and current reserve
for bass impact. The sale value are performance, packaging, and overall value make the
PowerMatch PM8500 will be the worldwide benchmark of configurable professional
power amplifier.
Features:
Specifications:
Power Rating
70V: 1 % THD
100V: 1 % THD
Mono Mode:
2 : 500 W
4: 500 W
8: 300 W
Bridge Mode
2 : 500 W
4: 1000 W
8: 1000 W
70V: 800 W
100V: 1000 W
I-Share Mode
2 : 1000 W
4: 500 W
8: 300 W
2 : 1000 W
4: 2000 W
8: 1000 W
70V: 1600 W
100V: 2000 W
Peak Output Voltage: 71 / 142 / 142 V (Mono / Bridge / Quad Bridge modes)
Audio Performance
Integrated DSP
Input EQ: 5-band PEQ (+/- 20 dB), notch, shelving, high pass, low pass
Loudspeaker: EQ 9-band PEQ (+/- 20 dB), shelving, high pass, low pass
Audio Inputs
Analog
Input
Channels:
8
(balanced
line
level)
Input
Impedance:
>
100
k
Sensitivity:
0,
+4,
+12,
+24
dBu,
selectable
Maximum
Input
Level:
+24
dBu
(at
24
dBu
sensitivity
setting)
Connectors, Input: 3-pin Phoenix (green color; part # 1776168)
Input
Channels:
8
(ESPLink
or
Input
Impedance:
Sensitivity:
Maximum
Input
Level:
N/A
Connectors, Input: TOSLINK (ESPLink) or Ethernet RJ45 (Cobranet)
Cobranet)
N/A
N/A
Audio Outputs
Electrical Specifications
Typical Current Draw, 1/3 Power: 15 A @ 120 VAC / 7.5 A @ 230 VAC
Overload Protection: High temperature, DC, HF, short, voltage limiter, current
limiter, inrush current, mains circuit breaker protection
Physical
Operating Temperature: 0 C - 40 C
General
Shure
Shure
Shure
Shure
Shure
Shure
Shure
Shure
Shure
Shure
SLX242 RP 2,8 Jt
Beta 89C Charger w/ hardcase RP 2,9 Jt
ULX 4/Beta58 RP 3, 8 Jt
ULX P6 RP 3, 7 Jt
ULX P8 RP 3, 9 Jt
UGX 898 RP 3,25 Jt
KLX4/Beta58 RP 3,95 Jt
UR4D RP 4, 75 Jt
UR6D RP 8, 7 Jt (Gold Champagne Color Limited)
Beta87 Charger Rp 2 jt
Cara Berbelanja
URE SM58+X2u
Beritahu Teman
Cetak
Bantuan?
SHURE SM58+X2u
Microphone + X2u USB Digital Bundle
Bhinneka
Part No
: SKU00706878
Price
: Rp 3,547,500
make
innovations
in
appearance
Overview
The legendary SM58 cardioid dynamic vocal microphone is now available with the X2u USB Signal
Adapter, which features built-in headphone monitoring with zero latency, and easy controls to balance
microphone and playback audio. Digitally record wherever your computer takes you -- just plug and
play for better-than-CD quality vocal reproduction.
Detail Specifications
Fitur
SM58
o
o
X2u
strength
o