Beruflich Dokumente
Kultur Dokumente
Email: info@powline.com
HomeNewsProducts
Design Codes, Standards, and Manuals Used in Power Line Systems' Software
Many of the requirements of the Codes and Standards listed below are
hard-coded in our software and can optionally
be selected by name.
However, you should understand that design criteria in PLS-CADD are generic
and can be
modified to fit almost any international Code or Standard. If
the information you are searching for regarding Codes
and Standards is not
included below it is because we do not have it. Please feel free to provide
updated information
or suggestions for additional references.
Program
ANSI O5.1
PLS-POLE Specifications and Dimensions for Wood
Poles
Version
Implemented
Current Pending
Version Revision
ANSI/TIA/EIA 222
PLS-POLE
Rev. F, G
Structural Standards for Steel Antenna
TOWER
1996,2006
Towers and Antenna Supporting Structures
How To
Acquire
ATIS
Rev. G
2006
TIA Online
TOWER
AS3995
Design of steel lattice towers and masts
1994
1994
IHS Global
TOWER
AS4100
Steel Structures
1998
1998
IHS Global
2002
2002
IHS Global
PLS-CADD
AS/NZS 7000:2010
PLS-POLE
2010
Overhead line design - Detailed procedures
TOWER
2010
Standards New
Zealand
2015
2015
2020
ASCE
Publications
Bookstore
2005, 2011
2011
2016
ASCE
Publications
Bookstore
2009
ASCE
Publications
Bookstore
1999
Techstreet
IHS Global
TOWER
TOWER
1999
Design Codes, Standards, and Manuals Used in Power Line Systems' Software
2002
2002
CIGRE
CSA S37
PLS-POLE
Antennas, Towers, and Antenna-Supporting 2001
TOWER
Structures
2001
Shop CSA
TOWER
ECCS
Recommendations for Angles in Lattice
Transmission Towers, European
Convention for Constructional Steel Work
1985
1985
PLS-CADD
EN50341-1:2001, EN50341-1:2012
PLS-POLE
CENELEC
TOWER
2001,2012
2012
European
Committee for
Electrotechnical
Standardization
2001,2015
2015
BSI Global
2001
European
Committee for
Electrotechnical
Standardization
PLS-CADD EN50341-3-17
PLS-POLE National Normative Aspects (NNA) for
TOWER
Portugal
2001
PLS-CADD EN50341-2-22
PLS-POLE National Normative Aspects (NNA) for
TOWER
Poland
2016
2016
European
Committee for
Electrotechnical
Standardization
ESAA C(b)1-2003
PLS-CADD
Guidelines for Design and Maintenance of
PLS-POLE
Overhead Distribution and Transmission
TOWER
Lines
2003
2003
SAI Global
ENV 1991-2-4
PLS-POLE Eurocode 1: Basis of design and actions on
structures
1991
1991
BSI Global
2003
2003
IEEE-738
Standard for Calculating the CurrentPLS-CADD
Temperature Relationship of Bare
Overhead Conductors
IEEE Standards
Association
IS 802
PLS-CADD
Use of Structural Steel in Overhead
PLS-POLE
Transmission Line Towers - Code of
TOWER
Practice
1995
India Standard
802, Bureau of
Indian
Standards, New
Dehli, India
PLS-CADD
PLS-POLE National Electric Safety Code
TOWER
1997, 2002,
2012
2007, 2012, 2017
TOWER
PN-90/B-03200
Steel Structures Design Rules (Poland)
1990
2017
2015
2017
IHS Global
IEEE Standards
Association
Design Codes, Standards, and Manuals Used in Power Line Systems' Software
SP 16.13330.2011
SNiP (Russia)
2011
2003
TOWER
2011
Other References:
Design Loads and Philosophies
"Wind Loading: Uncertainties and Honesty Suggest Simplification" A discussion by Dr. Alain H.
Peyrot (Download from PLS).
Guidelines for Electrical Transmission Line Structural Loading, ASCE Manual 74 - 2009
Design Criteria for Overhead Transmission Lines, Draft Standard No. 60826, International
Electrotechnical Commission, Geneva, Switzerland, 2000
Design Manual for High Voltage Transmission Lines, REA Bulletin 1724E-200, Rural Electrification
Administration, U.S. Dept. of Agriculture, Sept. 1992.
Transmission Line Design Manual, by Holland H. Farr, Western Area Power Administration, United
States Department of the Interior, 1980
Minimum Design Loads for Buildings and Other Structures, SEI/ASCE 7-02 (SEI/ASCE Standard No.
7-02)
C22.3 Overhead Systems, Canadian Standards Assocation
Transmission Structures
Design of Latticed Steel Transmission Structures, ASCE Standard 10-15, 2015
ASCE Standard 48-11 (previously ASCE Manual Design of Steel Transmission Pole Structures)
Design of Prestressed Concrete Poles, PCI Journal, Vol. 42, No.6, Nov. 1997 - will be available as
ASCE publication
Specifications and Dimensions for Wood Poles, ANSI 05-1, 2002
IEEE Trial-Use Design Guide for Wood Transmission Structures, IEEE Std. 751, 1991
Design of Guyed Electrical Transmission Structures, ASCE Manual 91, 1997
Structural Engineering Handbook, 4th Edition, McGraw Hill, 1997, Section 30 on Transmission and
Communication Structures by Peyrot and Brinker
AISC: LRFD Manual of Steel Construction - Third Edition
RUS Electric ProgramBulletins and Informational Publications
Conductor Design and Behavior
Sag-Tension Calculation Methods for Overhead Lines, CIGRE Brochure 324, Task Force B2.12.3
Southwire's Overhead Conductor Manual
Aluminum Electrical Conductor Handbook, Third Edition, Aluminum Association, 1989
Wind-Induced Conductor Motion, an EPRI Transmission Line Reference Book, EPRI Project 792, 1979
IEEE Standard for Calculating the Current-Temperature Relationship of Bare Overhead Conductors,
IEEE Std. 738, 1993
IEEE Guide for Describing the Effects of High Temperature Operation on Conductors, Connectors, and
Conductor Hardware for Overhead Transmission Lines, IEEE proposed standard under development,
1999
Foundations
IEEE Guide for Transmission Structure Foundation Design, IEEE Std. 691, 2001
Construction
IEEE Guide to the Installation of Overhead Transmission Line Conductors, IEEE Std. 524, 1992
Transmission Line Construction, an IEEE Standards Collection, 1994
2016 Power Line Systems, Inc. All Rights Reserved. Privacy Policy