Beruflich Dokumente
Kultur Dokumente
OpticalFiber
FiberOptics
TheOpticalFiber
Communications
EST MCQs
This is the Multiples Choice Questions Part 6 of the Series in Fiber Optics Communications as one of
the Communications Engineering topic. In Preparation for the ECE Board Exam make sure to expose
yourself and familiarize in each and every questions compiled here taken from various sources
including but not limited to past Board Examination Questions in Electronic System and Technologies,
Communications Books, Journals and other Communications References.
Become
FAN
Continue Practice Exam Test Questions Part
VI of PinoyBIX
the Series
251. Type of lasers that use organic dyes enclosed in glass tube for an active medium.
A. liquid lasers
B. plasma lasers
C. neon lasers
D. ruby lasers
A. 0.7 micrometer
B. 1.3 micrometer
C. 1.5 micrometer
D. 1.8 micrometer
253. Type of lasers that use solid, cylindrical crystals such as ruby
A. solid lasers
B. ILD
C. gas lasers
D. liquid lasers
254. Type of lasers that are made from semiconductor ph-junctions commonly called ILDs
A. semiconductor lasers
B. liquid lasers
C. plasma lasers
D. gas lasers
A. computer networks
C. closed-circuit TV
D. consumer TV
256. Total internal reection takes place if the light ray strikes the interface at an angle with what
relationship to the critical angle?
A. less than
B. greater than
C. equal to
D. zero
A. 1:10
B. 10:1
C. 20:1
D. 1:20
A. refraction
B. reection
C. dispersion
D. absorption
A. single-mode step-index
B. multimode graded-index
C. single-mode graded-index
D. multimode step-index
B. dB/km
A. 1 km
B. 2 km
C. 95 ft.
D. 500 ft.
263. The upper pulse rate and information-carrying capacity of a cable is limited by
A. pulse shortening
B. attenuation
C. light leakage
D. modal dispersion
A. air
B. glass
C. diamond
D. quartz
B. Keviar
C. cladding
D. plastic insulation
266. The speed of light in plastic compared to the speed of light in air is
A. less
B. more
C. the same
D. zero
D. lower cost
A. 70 percent of the core diameter and 70% of the ber NA should be lled with light.
B. 70 percent of the ber diameter and 70% of the cone of acceptance should be lled with light.
269. The main benet of light wave communications over microwaves or any other communications
media are
A. lower cost
B. better security
C. wider bandwidth
A. infrared
B. ultraviolet
C. visible color
D. x-rays
A. 0.8 to 1.6 um
B. 400 to 750 nm
C. 200 to 660 nm
D. 700 to 1200 nm
B. 50 to 100 micrometer
C. 2 to 15 micrometer
D. 5 to 20 micrometer
A. bending of light
274. Which of the following cables will have the highest launch power capability?
A. 50/125/0.2
B. 85/125/0.275
C. 62.5/125/0.275
D. 100/140/0.3
A. single-mode step-index
B. multimode step-index
277. It refers to the abrupt of change in refractive index from core to clad
A. step index
B. graded index
C. semi-graded index
Search
Pinoybix.org
LikePage
Labels:
824likes
Newer Post
(http://www.pinoybix.org/2014/12/answers-inoptical-ber-communications-part6.html)
POST A COMMENT
Older Post
(http://www.pinoybix.org/2014/12/answers-inoptical-ber-communications-part5.html)
disqus
blogger