Beruflich Dokumente
Kultur Dokumente
Configuration via:
DIP switch
Short description:
The 857-423 Signal Splitter converts standard signals and amplifies, filters and
electrically isolates analog standard signals.
Characteristics:
Two configurable current outputs
Calibrated scale switching
Switchable max. operating frequency
Safe 3-way isolation with 2.5kV test voltage to EN 61140
Technical Data
Configuration:
Configuration
Input:
Input signal
Input resistance
Output:
Output signal
Load impedance
General specifications:
Nominal supply voltage VS
Supply voltage range
Current consumption at 24 VDC
Max. operating frequency
Response time (T10-90)
Transmission error
Temperature coefficient
5 OUT 1+
IN
OUT 1
GND 1 2
6 GND 2
OUT 2+ 3
OUT 2
_>
_>
____________
IN+ 1
GND 4 4
7 Us+
POWER
8 GND 3
6 mm/0.23 in
Description
Item No.
Pack.
Unit
1
Technical Data
DIP switch
0 ... 20 mA, 4 ... 20 mA, 0... 5 V,
0 ... 10 V, 2 ... 10 V, 1 ... 5 V
(calibrated switchable)
50 (In = mA)
100 k (In = V)
2 x 0(4) ... 20 mA
(calibrated switchable)
2 x 300
24 VDC
VS -30 % +30 %
35 mA
100 Hz / 1 kHz
(switchable via DIP switch)
< 3.5 ms / < 300 s
0.1 % of the full scale value
0.01 % /K
08.07.2015
Environmental requirements:
Ambient operating temperature
Storage temperature
Safety and protection:
Test voltage (input/output/supply)
Connection and type of mounting:
Wire connection
Cross sections
Strip lengths
Dimensions and weight:
Dimensions (mm) W x H x L
Weight
Standards and approvals:
Conformity marking
r UL 508
r ANSI/ISA 12.12.01
Shipbuilding
EMC immunity of interference
EMC emission of interference
Accessories
Tel.: +49(0)571/887-0
E-Mail: info@wago.com
Fax: +49(0)571/887-169
www.wago.com
857-423
= ON
Input Signal
1
4
0 20 mA
4 20 mA
2 10 V
5
1 kHz
0 10 V
05V
Output Signal 1
15V
Default Settings
Input
0 20 mA
Output 1
0 20 mA
Output 2
0 20 mA
1 kHz
100 Hz
Output Signal 2
6
0 20 mA
4 20 mA
0 20 mA
4 20 mA