Beruflich Dokumente
Kultur Dokumente
you
Not
require
Q. 3
MDMT
Q. 5
A vessel is made from 1 inch thick plates SA 285 grade C. MDMT = 67 0 F. Will
10
F.
The vessel did not require PWHT as per Code but due to service requirement,
PWHT is to be performed. Is impact testing required?
Q.7
In this example Curve B will apply. Referring to Fig UCS 66, the point is below
3)
4)
Curve A applies
With Thickness = 1 & MDMT = 60o F
Point is below curve.
Impact test required.
5)
Curve A applies.
Thickness = 1 MDMT = 67 0 F
The point is close to Curve decision is difficult go to table UCS - 66
For 1 thickness & Curve A, temperature on Curve is 68 0 F. Our MDMT is less
Curve B applies.
Thickness = 1
Temperature on Curve is 31 0 F (transition temperature)
Due to PWHT (UCS 68 C) a reduction of 30 0 F can be given
Transition temperature now is 31