Sie sind auf Seite 1von 588

<6>[ 9803.

153537] [5:
mc_log: 3354]
.c 1090 4
<6>[ 9803.153544] [5:
mc_log: 3354]
.c 263 4
<6>[ 9803.153550] [5:
mc_log: 3354]
.c 278 4
<6>[ 9803.160355] [5:
mc_log: 3354]
int::Returning 0
<6>[ 9803.196049] [0: thread_hotplug:13461]
0, exe_cmd 4
<6>[ 9803.196072] [0: thread_hotplug:13461]
dm_hotplug disable = 0
<6>[ 9803.196087] [0: thread_hotplug:13461]
<6>[ 9803.210868] [5:
mc_log: 3354]
ndId :6
<6>[ 9803.210879] [5:
mc_log: 3354]
: 253
<6>[ 9803.210886] [5:
mc_log: 3354]
roller : 1166 : 4
<6>[ 9803.297375] [7: MHI_EV_THREAD: 4604]
ceived ring 0x0
<6>[ 9803.297458] [5:MHI_STATE_THREA: 4605]
ng to 3
<6>[ 9803.297468] [5:MHI_STATE_THREA: 4605]
M1 state transition from state 3
<6>[ 9803.297479] [5:MHI_STATE_THREA: 4605]
ansition to M2
<6>[ 9803.297665] [5:MHI_STATE_THREA: 4605]
deferred work
<6>[ 9803.872428] [7:
mc_log: 3354]
: 308 : 92
<6>[ 9803.872439] [7:
mc_log: 3354]
int::Returning 0
<6>[ 9803.887293] [7:
mc_log: 3354]
ndId :c
<6>[ 9803.887305] [7:
mc_log: 3354]
opcode : 46
<6>[ 9803.887313] [7:
mc_log: 3354]
int::Returning 0
<6>[ 9803.887334] [5: fingerprintd:13650]
UP OFF
<6>[ 9803.887347] [5: fingerprintd:13650]
1, active_cpu=0x00000004
<6>[ 9803.891352] [4:
mc_fastcall: 1747]
<6>[ 9803.894242] [5: fingerprintd:13650]
UP ON:2, retry: 0
<6>[ 9803.894255] [5: fingerprintd:13650]
ling time is too short. wait 10ms
<6>[ 9803.896040] [0: thread_hotplug:13461]
0, exe_cmd 4
<6>[ 9803.896064] [0: thread_hotplug:13461]
dm_hotplug disable = 0
<6>[ 9803.896079] [0: thread_hotplug:13461]
<6>[ 9803.905950] [5: fingerprintd:13650]
4, active_cpu=0x00000001
<6>[ 9803.906121] [1:
mc_fastcall: 1747]
<6>[ 9803.907556] [5:
mc_log: 3354]
ndId :7
<6>[ 9803.908481] [4:
mc_log: 3354]
: 329

MobiCore mcd: e01|SYNAFP: vcsImage


MobiCore mcd: e01|SYNAFP: vcsImage
MobiCore mcd: e01|SYNAFP: vcsImage
MobiCore mcd: e01|Trustlet Fingerpr
frequency info : 1000000, prev_cmd
lcd is on : 1, low power mode = 0,
cluster1 cores hotplug out : 0
MobiCore mcd: e01|FINGERPRINT comma
MobiCore mcd: e01|[FPLOG]vigis_api
MobiCore mcd: e01|[FPLOG]vigis_cont
[mhi_process_event_ring] MHI STE re
[process_stt_work_item] Transitioni
[process_M1_transition] Processing
[process_M1_transition] Allowing tr
[process_M1_transition] Starting M3
MobiCore mcd: e01|[FPLOG]vigis_api
MobiCore mcd: e01|Trustlet Fingerpr
MobiCore mcd: e01|FINGERPRINT comma
MobiCore mcd: e01|do_extra_control
MobiCore mcd: e01|Trustlet Fingerpr
vfsspi_ioctl VFSSPI_IOCTL_CPU_SPEED
MobiCore mcd: <- core_num=0x0000000
MobiCore mcd: CoreSwap ok 4 -> 1
vfsspi_ioctl VFSSPI_IOCTL_CPU_SPEED
secos_booster_request_pm_qos: recal
frequency info : 1000000, prev_cmd
lcd is on : 1, low power mode = 0,
cluster1 cores hotplug out : 0
MobiCore mcd: <- core_num=0x0000000
MobiCore mcd: CoreSwap ok 1 -> 4
MobiCore mcd: e01|FINGERPRINT comma
MobiCore mcd: e01|[FPLOG]vigis_api

<6>[ 9803.911869] [4:


roller : 1166 : 6
<6>[ 9803.911881] [4:
pture.c 394 4
<6>[ 9803.911889] [4:
re.c 161 4
<6>[ 9803.911897] [4:
.c 263 4
<6>[ 9803.911904] [4:
.c 278 4
<6>[ 9803.911911] [4:
ts.c 981 3
<6>[ 9803.911918] [4:
orLineUpdate.c 3706 3
<6>[ 9803.911925] [4:
intCmdHelpers.c 3842 4
<6>[ 9803.911932] [4:
intCmdHelpers.c 3842 4
<6>[ 9803.911939] [4:
intCmdHelpers.c 1472 3
<6>[ 9803.911946] [4:
rDevice.c 463 4
<6>[ 9803.946028] [5:
otocol.c 843 4
<6>[ 9803.946041] [5:
otocol.c 887 4
<6>[ 9803.946049] [5:
rDevice.c 557 4
<6>[ 9803.946057] [5:
c 270 4
<6>[ 9803.946064] [5:
c 312 4
<6>[ 9803.949322] [4:
c 705 4
<6>[ 9803.949333] [4:
c 722 4
<6>[ 9803.949343] [4:
.c 104 4
<6>[ 9803.949351] [4:
.c 214 4
<6>[ 9803.949358] [4:
c 2420 4
<6>[ 9803.949364] [4:
c 599 4
<6>[ 9803.949371] [4:
c 794 4
<6>[ 9803.949378] [4:
c 549 4
<6>[ 9803.949385] [4:
c 665 4
<6>[ 9803.949392] [4:
electFrame.c 938 4
<6>[ 9803.949399] [4:
c 2685 4
<6>[ 9803.949406] [4:
.c 85 4
<6>[ 9803.949413] [4:
.c 1845 4
<6>[ 9803.949419] [4:
.c 1908 4

mc_log: 3354] MobiCore mcd: e01|[FPLOG]vigis_cont


mc_log: 3354] MobiCore mcd: e01|SYNAFP: synaFpCa
mc_log: 3354] MobiCore mcd: e01|SYNAFP: vfmCaptu
mc_log: 3354] MobiCore mcd: e01|SYNAFP: vcsImage
mc_log: 3354] MobiCore mcd: e01|SYNAFP: vcsImage
mc_log: 3354] MobiCore mcd: e01|SYNAFP: calResul
mc_log: 3354] MobiCore mcd: e01|SYNAFP: scsWinds
mc_log: 3354] MobiCore mcd: e01|SYNAFP: scsGetPr
mc_log: 3354] MobiCore mcd: e01|SYNAFP: scsGetPr
mc_log: 3354] MobiCore mcd: e01|SYNAFP: scsGetPr
mc_log: 3354] MobiCore mcd: e01|SYNAFP: scsSenso
mc_log: 3354] MobiCore mcd: e01|SYNAFP: palSpiPr
mc_log: 3354] MobiCore mcd: e01|SYNAFP: palSpiPr
mc_log: 3354] MobiCore mcd: e01|SYNAFP: scsSenso
mc_log: 3354] MobiCore mcd: e01|SYNAFP: irDliRT.
mc_log: 3354] MobiCore mcd: e01|SYNAFP: irDliRT.
mc_log: 3354] MobiCore mcd: e01|SYNAFP: irDliRT.
mc_log: 3354] MobiCore mcd: e01|SYNAFP: irDliRT.
mc_log: 3354] MobiCore mcd: e01|SYNAFP: vcsImage
mc_log: 3354] MobiCore mcd: e01|SYNAFP: vcsImage
mc_log: 3354] MobiCore mcd: e01|SYNAFP: irDliRT.
mc_log: 3354] MobiCore mcd: e01|SYNAFP: dliUtil.
mc_log: 3354] MobiCore mcd: e01|SYNAFP: dliUtil.
mc_log: 3354] MobiCore mcd: e01|SYNAFP: irDliRT.
mc_log: 3354] MobiCore mcd: e01|SYNAFP: irDliRT.
mc_log: 3354] MobiCore mcd: e01|SYNAFP: vcsIR2DS
mc_log: 3354] MobiCore mcd: e01|SYNAFP: irDliRT.
mc_log: 3354] MobiCore mcd: e01|SYNAFP: vcsIRApi
mc_log: 3354] MobiCore mcd: e01|SYNAFP: vcsIRApi
mc_log: 3354] MobiCore mcd: e01|SYNAFP: vcsIRApi

<6>[ 9803.951257]
.c 905 4
<6>[ 9803.951265]
c 1122 4
<6>[ 9803.951272]
re.c 108 4
<6>[ 9803.951278]
re.c 418 4
<6>[ 9803.951285]
int::Returning 0
<6>[ 9803.951327]
INT
<6>[ 9803.951335]
<3>[ 9803.951342]
disabled
<6>[ 9803.952719]
ndId :a
<6>[ 9803.952732]
: 373 : 25
<6>[ 9803.954164]
: 387
<6>[ 9803.954176]
pture.c 63 4
<6>[ 9803.954184]
pture.c 522 4
<6>[ 9803.954191]
re.c 1099 4
<6>[ 9803.954198]
rDevice.c 464 4
<6>[ 9803.966004]
otocol.c 843 4
<6>[ 9803.966014]
otocol.c 887 4
<6>[ 9803.966023]
rDevice.c 552 4
<6>[ 9803.966030]
otocol.c 1301 4
<6>[ 9803.966037]
c 1143 4
<6>[ 9803.966044]
.c 921 4
<6>[ 9803.966051]
.c 1184 4
<6>[ 9803.966058]
.c 263 4
<6>[ 9803.966065]
.c 278 4
<6>[ 9803.966072]
c 1775 4
<6>[ 9803.966078]
.c 263 4
<6>[ 9803.966085]
.c 278 4
<6>[ 9803.967405]
c 1818 4
<6>[ 9803.967413]
c 1178 4
<6>[ 9803.967421]
re.c 133 4
<6>[ 9803.967428]

[4:

mc_log: 3354] MobiCore mcd: e01|SYNAFP: vcsIRApi

[4:

mc_log: 3354] MobiCore mcd: e01|SYNAFP: irDliRT.

[4:

mc_log: 3354] MobiCore mcd: e01|SYNAFP: vfmCaptu

[4:

mc_log: 3354] MobiCore mcd: e01|SYNAFP: vfmCaptu

[4:

mc_log: 3354] MobiCore mcd: e01|Trustlet Fingerpr

[5:

fingerprintd:13650] vfsspi_ioctl VFSSPI_IOCTL_SET_DRDY_

[5:
[5:

fingerprintd:13650] vfsspi_disableIrq
fingerprintd:13650] vfsspi_disableIrq DRDY irq already

[6:

mc_log: 3354] MobiCore mcd: e01|FINGERPRINT comma

[6:

mc_log: 3354] MobiCore mcd: e01|[FPLOG]vigis_api

[7:

mc_log: 3354] MobiCore mcd: e01|[FPLOG]vigis_api

[7:

mc_log: 3354] MobiCore mcd: e01|SYNAFP: synaFpCa

[7:

mc_log: 3354] MobiCore mcd: e01|SYNAFP: synaFpCa

[7:

mc_log: 3354] MobiCore mcd: e01|SYNAFP: vfmCaptu

[7:

mc_log: 3354] MobiCore mcd: e01|SYNAFP: scsSenso

[7:

mc_log: 3354] MobiCore mcd: e01|SYNAFP: palSpiPr

[7:

mc_log: 3354] MobiCore mcd: e01|SYNAFP: palSpiPr

[7:

mc_log: 3354] MobiCore mcd: e01|SYNAFP: scsSenso

[7:

mc_log: 3354] MobiCore mcd: e01|SYNAFP: palSpiPr

[7:

mc_log: 3354] MobiCore mcd: e01|SYNAFP: irDliRT.

[7:

mc_log: 3354] MobiCore mcd: e01|SYNAFP: vcsIRApi

[7:

mc_log: 3354] MobiCore mcd: e01|SYNAFP: vcsIRApi

[7:

mc_log: 3354] MobiCore mcd: e01|SYNAFP: vcsImage

[7:

mc_log: 3354] MobiCore mcd: e01|SYNAFP: vcsImage

[7:

mc_log: 3354] MobiCore mcd: e01|SYNAFP: irDliRT.

[7:

mc_log: 3354] MobiCore mcd: e01|SYNAFP: vcsImage

[7:

mc_log: 3354] MobiCore mcd: e01|SYNAFP: vcsImage

[7:

mc_log: 3354] MobiCore mcd: e01|SYNAFP: irDliRT.

[7:

mc_log: 3354] MobiCore mcd: e01|SYNAFP: irDliRT.

[7:

mc_log: 3354] MobiCore mcd: e01|SYNAFP: vfmCaptu

[7:

mc_log: 3354] MobiCore mcd: e01|SYNAFP: vfmCaptu

re.c 1138 4
<6>[ 9803.967434] [7:
mc_log: 3354] MobiCore mcd: e01|SYNAFP: synaFpCa
pture.c 544 4
<6>[ 9803.967442] [7:
mc_log: 3354] MobiCore mcd: e01|Trustlet Fingerpr
int::Returning 0
<6>[ 9803.967459] [5: fingerprintd:13650] vfsspi_ioctl VFSSPI_IOCTL_SET_LOCKS
CREEN :OFF
<6>[ 9803.967474] [5: fingerprintd:13650] vfsspi_ioctl VFSSPI_IOCTL_CPU_SPEED
UP OFF
<6>[ 9803.967483] [5: fingerprintd:13650] MobiCore mcd: <- core_num=0x0000000
1, active_cpu=0x00000004
<6>[ 9803.972902] [7:
mc_log: 3354] MobiCore mcd: b01|TL_TZ_KEYSTORE: S
tarting
<6>[ 9803.974490] [4:
mc_fastcall: 1747] MobiCore mcd: CoreSwap ok 4 -> 1
<6>[ 9803.975338] [6: fingerprintd:13673] vfsspi_ioctl VFSSPI_IOCTL_CPU_SPEED
UP ON:2, retry: 0
<6>[ 9803.975350] [6: fingerprintd:13673] secos_booster_request_pm_qos: recal
ling time is too short. wait 10ms
<6>[ 9803.975974] [4:
mc_log: 3354] MobiCore mcd: b01|TL_TZ_KEYSTORE: G
ot a message!
<6>[ 9803.975983] [4:
mc_log: 3354] MobiCore mcd: b01|TZ_KEYSTORE: we g
ot a command
<6>[ 9803.975990] [4:
mc_log: 3354] MobiCore mcd: b01|TZ_KEYSTORE: proc
ess_cmd: CMD_TZ_KEYSTORE_init:
<6>[ 9803.979375] [4:
mc_log: 3354] MobiCore mcd: b01|TIMA trustlet: g
et_sec_TIMA_address tima_sec_mem_addr : FE800000
<6>[ 9803.979384] [4:
mc_log: 3354] MobiCore mcd: 501|drTima: processin
g TIMA_DRIVER_PHYS_MEM_ACCESS_COPY
<6>[ 9803.979391] [4:
mc_log: 3354] MobiCore mcd: 501|drTima: data_len
= 32 = 0x20
<6>[ 9803.979397] [4:
mc_log: 3354] MobiCore mcd: 501|drTima: PHYS_READ
<6>[ 9803.979404] [4:
mc_log: 3354] MobiCore mcd: b01|TIMA trustlet: wa
rranty violation detected 18
<6>[ 9803.979410] [4:
mc_log: 3354] MobiCore mcd: b01|TZ_COMMON: Initia
lize failed - tamper fuse set
<6>[ 9803.979417] [4:
mc_log: 3354] MobiCore mcd: b01|Trustlet TL_TZ_KE
YSTORE: sendmsg->header.id = 0x00000001
<6>[ 9803.979424] [4:
mc_log: 3354] MobiCore mcd: b01|Trustlet TL_TZ_KE
YSTORE: respmsg->header.id = 0x80000001
<6>[ 9803.980543] [4:
mc_log: 3354] MobiCore mcd: b01|Trustlet TL_TZ_KE
YSTORE: respmsg->header.status = 0x00000000
<6>[ 9803.981018] [4:
mc_log: 3354] MobiCore mcd: b01|TL_TZ_KEYSTORE: R
eturning = 0x00000000
<6>[ 9803.985969] [7:
mc_log: 3354] MobiCore mcd: 104| SMGNT send MSG_C
LOSE_TRUSTLET for thread b01 to IPCH
<6>[ 9803.985985] [7:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 202 (UUID=02010000-0000-0000-0000-000000005000) (server 0/8 status i
s 00000001)
<6>[ 9803.987648] [2:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 302 (UUID=ffffffff-0000-0000-0000-000000000002) (server 1/8 status i
s 00000001)
<6>[ 9803.988828] [5:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 402 (UUID=ffffffff-0000-0000-0000-000000000001) (server 2/8 status i
s 00000001)
<6>[ 9803.989290] [4: fingerprintd:13673] MobiCore mcd: <- core_num=0x0000000
4, active_cpu=0x00000001
<6>[ 9803.989367] [1:
mc_fastcall: 1747] MobiCore mcd: CoreSwap ok 1 -> 4
<6>[ 9803.992631] [4:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 501 (UUID=ffffffff-d000-0000-0000-00000000000a) (server 3/8 status i
s 00000001)

<6>[ 9803.992647] [4:


mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 602 (UUID=ffffffff-d000-0000-0000-000000000016) (server 4/8 status i
s 00000001)
<6>[ 9803.995952] [0: thread_hotplug:13461] frequency info : 1104000, prev_cmd
0, exe_cmd 4
<6>[ 9803.995971] [0: thread_hotplug:13461] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9803.995985] [0: thread_hotplug:13461] cluster1 cores hotplug out : 0
<6>[ 9804.000906] [4:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 702 (UUID=07050500-0000-0000-0000-000000000000) (server 5/8 status i
s 00000001)
<6>[ 9804.000921] [4:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to d02 (UUID=ffffffff-d000-0000-0000-00000000000e) (server 6/8 status i
s 00000001)
<6>[ 9804.000932] [4:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 902 (UUID=ffffffff-d000-0000-0000-000000000014) (server 7/8 status i
s 00000001)
<6>[ 9804.000941] [4:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop do
ne
<6>[ 9804.000951] [4:
mc_log: 3354] MobiCore mcd: 501|drTima: MSG_CLOSE
_TRUSTLET call 0x40001
<6>[ 9804.000961] [4:
mc_log: 3354] MobiCore mcd: d02|Driver SPI receiv
es MSG_CLOSE_TRUSTLET[0x00040001, 0x0001000b]
<6>[ 9804.000970] [4:
mc_log: 3354] MobiCore mcd: 104| SMGNT smgntClose
Session done
<6>[ 9804.004753] [4:
mc_log: 3354] MobiCore mcd: e01|FINGERPRINT comma
ndId :5
<6>[ 9804.010106] [7: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa27090
<6>[ 9804.010127] [7: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9804.010156] [5:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9804.010171] [5:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9804.010182] [5:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work was
cancelled
<6>[ 9804.010979] [5:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9804.014247] [5:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 79 17 51 00 0e 00 14 06 00
<6>[ 9804.014738] [6:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 35 19 4f 00 00 00
<6>[ 9804.027114] [5:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 35 19 4f 00 15 00 02 04 00
<6>[ 9804.049434] [4:
mc_log: 3354] MobiCore mcd: e01|[FPLOG]vigis_api
: 226
<6>[ 9804.049450] [4:
mc_log: 3354] MobiCore mcd: e01|[FPLOG]vigis_cont
roller : 693 : 66
<6>[ 9804.055873] [4:
mc_log: 3354] MobiCore mcd: e01|[FPLOG]vigis_cont
roller : 693 : 66
<6>[ 9804.066115] [4:
mc_log: 3354] MobiCore mcd: e01|[FPLOG]vigis_cont
roller : 693 : 66
<6>[ 9804.066152] [4:
mc_log: 3354] MobiCore mcd: e01|[FPLOG]vigis_cont
roller : 693 : 66
<6>[ 9804.071939] [4:
mc_log: 3354] MobiCore mcd: e01|[FPLOG]vigis_cont
roller : 1166 : 0
<6>[ 9804.071953] [4:
mc_log: 3354] MobiCore mcd: e01|Trustlet Fingerpr
int::Returning 0
<6>[ 9804.083051] [4:
mc_log: 3354] MobiCore mcd: e01|FINGERPRINT comma
ndId :6
<6>[ 9804.083064] [4:
mc_log: 3354] MobiCore mcd: e01|[FPLOG]vigis_api

: 253
<6>[ 9804.083072] [4:
roller : 1166 : 1
<6>[ 9804.083080] [4:
pture.c 144 4
<6>[ 9804.083087] [4:
re.c 161 4
<6>[ 9804.083093] [4:
.c 263 4
<6>[ 9804.083101] [4:
.c 64 3
<6>[ 9804.083107] [4:
.c 278 4
<6>[ 9804.083114] [4:
ts.c 981 3
<6>[ 9804.083121] [4:
orLineUpdate.c 3706 3
<6>[ 9804.083128] [4:
intCmdHelpers.c 3842 4
<6>[ 9804.083134] [4:
intCmdHelpers.c 3842 4
<6>[ 9804.083145] [4:
intCmdHelpers.c 1472 3
<6>[ 9804.083151] [4:
rDevice.c 463 4
<6>[ 9804.101321] [4:
otocol.c 843 4
<6>[ 9804.115047] [2:
INT
<6>[ 9804.115089] [2:
<6>[ 9804.115123] [0:
otocol.c 887 4
<6>[ 9804.115158] [0:
rDevice.c 557 4
<6>[ 9804.115189] [0:
c 270 4
<6>[ 9804.115219] [0:
c 312 4
<6>[ 9804.115249] [0:
c 705 4
<6>[ 9804.115279] [0:
c 722 4
<6>[ 9804.115309] [0:
.c 104 4
<6>[ 9804.115338] [0:
.c 214 4
<6>[ 9804.115368] [0:
c 2420 4
<6>[ 9804.115398] [0:
c 599 4
<6>[ 9804.115428] [0:
c 794 4
<6>[ 9804.115457] [0:
c 549 4
<6>[ 9804.115486] [0:
c 665 4
<6>[ 9804.115516] [0:
electFrame.c 938 4
<6>[ 9804.115546] [0:
c 2685 4

mc_log: 3354] MobiCore mcd: e01|[FPLOG]vigis_cont


mc_log: 3354] MobiCore mcd: e01|SYNAFP: synaFpCa
mc_log: 3354] MobiCore mcd: e01|SYNAFP: vfmCaptu
mc_log: 3354] MobiCore mcd: e01|SYNAFP: vcsImage
mc_log: 3354] MobiCore mcd: e01|SYNAFP: vcsImage
mc_log: 3354] MobiCore mcd: e01|SYNAFP: vcsImage
mc_log: 3354] MobiCore mcd: e01|SYNAFP: calResul
mc_log: 3354] MobiCore mcd: e01|SYNAFP: scsWinds
mc_log: 3354] MobiCore mcd: e01|SYNAFP: scsGetPr
mc_log: 3354] MobiCore mcd: e01|SYNAFP: scsGetPr
mc_log: 3354] MobiCore mcd: e01|SYNAFP: scsGetPr
mc_log: 3354] MobiCore mcd: e01|SYNAFP: scsSenso
mc_log: 3354] MobiCore mcd: e01|SYNAFP: palSpiPr
fingerprintd:13673] vfsspi_ioctl VFSSPI_IOCTL_SET_DRDY_
fingerprintd:13673] vfsspi_enableIrq
mc_log: 3354] MobiCore mcd: e01|SYNAFP: palSpiPr
mc_log: 3354] MobiCore mcd: e01|SYNAFP: scsSenso
mc_log: 3354] MobiCore mcd: e01|SYNAFP: irDliRT.
mc_log: 3354] MobiCore mcd: e01|SYNAFP: irDliRT.
mc_log: 3354] MobiCore mcd: e01|SYNAFP: irDliRT.
mc_log: 3354] MobiCore mcd: e01|SYNAFP: irDliRT.
mc_log: 3354] MobiCore mcd: e01|SYNAFP: vcsImage
mc_log: 3354] MobiCore mcd: e01|SYNAFP: vcsImage
mc_log: 3354] MobiCore mcd: e01|SYNAFP: irDliRT.
mc_log: 3354] MobiCore mcd: e01|SYNAFP: dliUtil.
mc_log: 3354] MobiCore mcd: e01|SYNAFP: dliUtil.
mc_log: 3354] MobiCore mcd: e01|SYNAFP: irDliRT.
mc_log: 3354] MobiCore mcd: e01|SYNAFP: irDliRT.
mc_log: 3354] MobiCore mcd: e01|SYNAFP: vcsIR2DS
mc_log: 3354] MobiCore mcd: e01|SYNAFP: irDliRT.

<6>[ 9804.115575] [0:


.c 85 4
<6>[ 9804.115605] [0:
.c 1845 4
<6>[ 9804.115634] [0:
.c 1908 4
<6>[ 9804.115664] [0:
.c 905 4
<6>[ 9804.115693] [0:
c 1122 4
<6>[ 9804.115723] [0:
re.c 108 4
<6>[ 9804.115753] [0:
re.c 418 4
<6>[ 9804.115783] [0:
int::Returning 0
<6>[ 9804.115839] [2:
eady active atatus
<6>[ 9804.116006] [2:
UP OFF
<6>[ 9804.116054] [2:
1, active_cpu=0x00000004
<6>[ 9804.116201] [4:
<6>[ 9804.119381] [6:
INT
<6>[ 9804.119393] [6:
<6>[ 9804.121897] [6:
ndId :a
<6>[ 9804.121910] [6:
: 373 : 25
<6>[ 9804.121919] [6:
: 387
<6>[ 9804.121944] [6:
pture.c 63 4
<6>[ 9804.121983] [6:
pture.c 522 4
<6>[ 9804.121990] [6:
re.c 1099 4
<6>[ 9804.121997] [6:
rDevice.c 464 4
<6>[ 9804.128647] [2:
otocol.c 843 4
<6>[ 9804.132121] [4:
otocol.c 887 4
<6>[ 9804.133389] [5:
rDevice.c 552 4
<6>[ 9804.136067] [6:
otocol.c 1301 4
<6>[ 9804.136080] [6:
c 1143 4
<6>[ 9804.136088] [6:
.c 921 4
<6>[ 9804.136095] [6:
.c 1184 4
<6>[ 9804.136102] [6:
.c 263 4
<6>[ 9804.136556] [7:
.c 278 4
<6>[ 9804.137915] [7:
c 1775 4

mc_log: 3354] MobiCore mcd: e01|SYNAFP: vcsIRApi


mc_log: 3354] MobiCore mcd: e01|SYNAFP: vcsIRApi
mc_log: 3354] MobiCore mcd: e01|SYNAFP: vcsIRApi
mc_log: 3354] MobiCore mcd: e01|SYNAFP: vcsIRApi
mc_log: 3354] MobiCore mcd: e01|SYNAFP: irDliRT.
mc_log: 3354] MobiCore mcd: e01|SYNAFP: vfmCaptu
mc_log: 3354] MobiCore mcd: e01|SYNAFP: vfmCaptu
mc_log: 3354] MobiCore mcd: e01|Trustlet Fingerpr
fingerprintd:13673] vfsspi_set_drdy_int drdy pin is alr
fingerprintd:13673] vfsspi_ioctl VFSSPI_IOCTL_CPU_SPEED
fingerprintd:13673] MobiCore mcd: <- core_num=0x0000000
mc_fastcall: 1747] MobiCore mcd: CoreSwap ok 4 -> 1
fingerprintd:13673] vfsspi_ioctl VFSSPI_IOCTL_SET_DRDY_
fingerprintd:13673] vfsspi_disableIrq
mc_log: 3354] MobiCore mcd: e01|FINGERPRINT comma
mc_log: 3354] MobiCore mcd: e01|[FPLOG]vigis_api
mc_log: 3354] MobiCore mcd: e01|[FPLOG]vigis_api
mc_log: 3354] MobiCore mcd: e01|SYNAFP: synaFpCa
mc_log: 3354] MobiCore mcd: e01|SYNAFP: synaFpCa
mc_log: 3354] MobiCore mcd: e01|SYNAFP: vfmCaptu
mc_log: 3354] MobiCore mcd: e01|SYNAFP: scsSenso
mc_log: 3354] MobiCore mcd: e01|SYNAFP: palSpiPr
mc_log: 3354] MobiCore mcd: e01|SYNAFP: palSpiPr
mc_log: 3354] MobiCore mcd: e01|SYNAFP: scsSenso
mc_log: 3354] MobiCore mcd: e01|SYNAFP: palSpiPr
mc_log: 3354] MobiCore mcd: e01|SYNAFP: irDliRT.
mc_log: 3354] MobiCore mcd: e01|SYNAFP: vcsIRApi
mc_log: 3354] MobiCore mcd: e01|SYNAFP: vcsIRApi
mc_log: 3354] MobiCore mcd: e01|SYNAFP: vcsImage
mc_log: 3354] MobiCore mcd: e01|SYNAFP: vcsImage
mc_log: 3354] MobiCore mcd: e01|SYNAFP: irDliRT.

<6>[ 9804.137927] [7:


mc_log: 3354] MobiCore mcd: e01|SYNAFP: vcsImage
.c 263 4
<6>[ 9804.137936] [7:
mc_log: 3354] MobiCore mcd: e01|SYNAFP: vcsImage
.c 278 4
<6>[ 9804.137943] [7:
mc_log: 3354] MobiCore mcd: e01|SYNAFP: irDliRT.
c 1818 4
<6>[ 9804.142607] [6:
mc_log: 3354] MobiCore mcd: e01|SYNAFP: irDliRT.
c 1178 4
<6>[ 9804.142619] [6:
mc_log: 3354] MobiCore mcd: e01|SYNAFP: vfmCaptu
re.c 133 4
<6>[ 9804.142627] [6:
mc_log: 3354] MobiCore mcd: e01|SYNAFP: vfmCaptu
re.c 1138 4
<6>[ 9804.142635] [6:
mc_log: 3354] MobiCore mcd: e01|SYNAFP: synaFpCa
pture.c 544 4
<6>[ 9804.142642] [6:
mc_log: 3354] MobiCore mcd: e01|Trustlet Fingerpr
int::Returning 0
<6>[ 9804.142798] [2: fingerprintd:13673] vfsspi_ioctl VFSSPI_IOCTL_SET_DRDY_
INT
<6>[ 9804.142821] [2: fingerprintd:13673] vfsspi_disableIrq
<3>[ 9804.142836] [2: fingerprintd:13673] vfsspi_disableIrq DRDY irq already
disabled
<6>[ 9804.142909] [2: fingerprintd:13673] vfsspi_ioctl VFSSPI_IOCTL_SET_LOCKS
CREEN :OFF
<6>[ 9804.195992] [0: thread_hotplug:13461] frequency info : 1000000, prev_cmd
0, exe_cmd 4
<6>[ 9804.196018] [0: thread_hotplug:13461] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9804.196038] [0: thread_hotplug:13461] cluster1 cores hotplug out : 0
<6>[ 9804.235263] [7: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9804.235289] [5:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[ 9804.235301] [5:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[ 9804.235313] [5:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9804.235500] [5:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[ 9804.312721] [4: kworker/u16:3: 8924] [SSP] debug_work_func: (199) - Sens
or state: 0x1fc3febf, RC: 1, CC: 0 DC: 0 TC: 0
<6>[ 9804.312738] [6: kworker/u16:26:32550] vfsspi_work_func_debug ldo: 3, slee
p: 1, irq: 0, tz: 1, type: viper
<6>[ 9804.312763] [4: kworker/u16:3: 8924] [SSP] 0 : 413, 7309, 3701 (200ms, 0
ms)
<6>[ 9804.312778] [4: kworker/u16:3: 8924] [SSP] 9 : 46, 35, 39, 111, 245, 3 (
200ms)
<6>[ 9804.312790] [4: kworker/u16:3: 8924] [SSP] 13 : 1(1ms)
<6>[ 9804.324382] [1: irq/15-SSP_Int: 1775] [SSP] [M] AR-0,394,7350,3749,180,20
,0,0
<6>[ 9804.351854] [4:
mc_log: 3354] MobiCore mcd: b01|ccccccccccccccccc
cccccccccTL_TZ_CCM: tciBufferLen = 38912 = 0x9800
<6>[ 9804.351876] [4:
mc_log: 3354] MobiCore mcd: b01|Trustlet TL_TZ_CC
M: Starting
<6>[ 9804.351891] [4:
mc_log: 3354] MobiCore mcd: b01|TL_TZ_CCM: tciBuf
ferLen = 38912 = 0x9800
<6>[ 9804.351904] [4:
mc_log: 3354] MobiCore mcd: b01|TL_TZ_CCM: sendms
g envelope length = 19456 = 0x4c00
<6>[ 9804.351916] [4:
mc_log: 3354] MobiCore mcd: b01|TL_TZ_CCM: sendms
g = 00092c80, respmsg = 0009785c
<6>[ 9804.352755] [2:
mc_log: 3354] MobiCore mcd: b01|Trustlet TL_TZ_CC

M: Got a message!
<6>[ 9804.352781] [2:
mc_log: 3354] MobiCore mcd: b01|TZ_CCM: we got a
command
<6>[ 9804.352797] [2:
mc_log: 3354] MobiCore mcd: b01|TZ_CCM: process_c
md: CMD_TZ_CCM_C_Initialize:
<6>[ 9804.354633] [6:
mc_log: 3354] MobiCore mcd: b01|TIMA trustlet: Re
ading knox license status
<6>[ 9804.354655] [6:
mc_log: 3354] MobiCore mcd: b01|TIMA trustlet: g
et_sec_TIMA_address tima_sec_mem_addr : FE800000
<6>[ 9804.355972] [6:
mc_log: 3354] MobiCore mcd: 501|drTima: processin
g TIMA_DRIVER_PHYS_MEM_ACCESS_COPY
<6>[ 9804.355991] [6:
mc_log: 3354] MobiCore mcd: 501|drTima: data_len
= 4 = 0x4
<6>[ 9804.356005] [6:
mc_log: 3354] MobiCore mcd: 501|drTima: PHYS_READ
<6>[ 9804.356017] [6:
mc_log: 3354] MobiCore mcd: b01|read license stat
us is: 0
<6>[ 9804.356029] [6:
mc_log: 3354] MobiCore mcd: b01|low security mode
<6>[ 9804.359305] [4:
mc_log: 3354] MobiCore mcd: 501|drTima: processin
g TIMA_DRIVER_PHYS_MEM_ACCESS_COPY
<6>[ 9804.361976] [0:
mc_log: 3354] MobiCore mcd: 501|drTima: data_len
= 32 = 0x20
<6>[ 9804.362002] [0:
mc_log: 3354] MobiCore mcd: 501|drTima: PHYS_READ
<6>[ 9804.362019] [0:
mc_log: 3354] MobiCore mcd: b01|TIMA trustlet: wa
rranty violation detected 18
<6>[ 9804.362036] [0:
mc_log: 3354] MobiCore mcd: b01|TZ_COMMON: Initia
lize failed - tamper fuse set
<6>[ 9804.362054] [0:
mc_log: 3354] MobiCore mcd: b01|TL_TZ_CCM: TL CCM
general initialization failure
<6>[ 9804.362070] [0:
mc_log: 3354] MobiCore mcd: b01|Trustlet TL_TZ_CC
M: sendmsg->header.id = 0x00000002
<6>[ 9804.362087] [0:
mc_log: 3354] MobiCore mcd: b01|Trustlet TL_TZ_CC
M: respmsg->header.id = 0x80000002
<6>[ 9804.362104] [0:
mc_log: 3354] MobiCore mcd: b01|Trustlet TL_TZ_CC
M: respmsg->header.status = 0x00000000
<6>[ 9804.362120] [0:
mc_log: 3354] MobiCore mcd: b01|Trustlet TL_TZ_CC
M: Returning = 0x00000000
<6>[ 9804.364967] [5:
mc_log: 3354] MobiCore mcd: 104| SMGNT send MSG_C
LOSE_TRUSTLET for thread b01 to IPCH
<6>[ 9804.368453] [4:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 202 (UUID=02010000-0000-0000-0000-000000005000) (server 0/8 status i
s 00000001)
<6>[ 9804.368476] [4:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 302 (UUID=ffffffff-0000-0000-0000-000000000002) (server 1/8 status i
s 00000001)
<6>[ 9804.371461] [5:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 402 (UUID=ffffffff-0000-0000-0000-000000000001) (server 2/8 status i
s 00000001)
<6>[ 9804.371755] [4:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 501 (UUID=ffffffff-d000-0000-0000-00000000000a) (server 3/8 status i
s 00000001)
<6>[ 9804.374718] [5:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 602 (UUID=ffffffff-d000-0000-0000-000000000016) (server 4/8 status i
s 00000001)
<6>[ 9804.378739] [5:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 702 (UUID=07050500-0000-0000-0000-000000000000) (server 5/8 status i
s 00000001)
<6>[ 9804.378763] [5:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to d02 (UUID=ffffffff-d000-0000-0000-00000000000e) (server 6/8 status i
s 00000001)
<6>[ 9804.381806] [5:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se

nd Event to 902 (UUID=ffffffff-d000-0000-0000-000000000014) (server 7/8 status i


s 00000001)
<6>[ 9804.381825] [5:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop do
ne
<6>[ 9804.381838] [5:
mc_log: 3354] MobiCore mcd: 501|drTima: MSG_CLOSE
_TRUSTLET call 0x40001
<6>[ 9804.385317] [5:
mc_log: 3354] MobiCore mcd: d02|Driver SPI receiv
es MSG_CLOSE_TRUSTLET[0x00040001, 0x0001000b]
<6>[ 9804.385336] [5:
mc_log: 3354] MobiCore mcd: 104| SMGNT smgntClose
Session done
<3>[ 9804.396349] [5:
tlc_server: 5103] MobiCore mcd: closed by PID(5103),
name(tlc_server)
<6>[ 9804.946240] [7:
mc_log: 3354] MobiCore mcd: e01|FINGERPRINT comma
ndId :c
<6>[ 9804.947599] [7:
mc_log: 3354] MobiCore mcd: e01|do_extra_control
opcode : 30
<6>[ 9804.962625] [5:
mc_log: 3354] MobiCore mcd: e01|[FPLOG]vigis_api
: 600
<6>[ 9804.962644] [5:
mc_log: 3354] MobiCore mcd: e01|SYNAFP: synaFp.c
106 4
<6>[ 9804.962657] [5:
mc_log: 3354] MobiCore mcd: e01|SYNAFP: vfmDevic
e.c 114 4
<6>[ 9804.962670] [5:
mc_log: 3354] MobiCore mcd: e01|SYNAFP: scsSenso
rDevice.c 271 4
<6>[ 9804.963228] [5:
mc_log: 3354] MobiCore mcd: e01|SYNAFP: scsSenso
rDevice.c 164 4
<6>[ 9804.966052] [7:
mc_log: 3354] MobiCore mcd: d02|[Secure SPI] sec_
spi_exit
<6>[ 9804.966069] [7:
mc_log: 3354] MobiCore mcd: e01|SYNAFP: vfmDevic
e.c 274 4
<6>[ 9804.969391] [7:
mc_log: 3354] MobiCore mcd: e01|SYNAFP: vcsImage
.c 263 4
<6>[ 9804.969407] [7:
mc_log: 3354] MobiCore mcd: e01|SYNAFP: vcsImage
.c 64 3
<6>[ 9804.969419] [7:
mc_log: 3354] MobiCore mcd: e01|SYNAFP: vcsImage
.c 278 4
<6>[ 9804.969434] [7:
mc_log: 3354] MobiCore mcd: e01|SYNAFP: vfmDevic
e.c 344 4
<6>[ 9804.969446] [7:
mc_log: 3354] MobiCore mcd: e01|SYNAFP: vfmDevic
e.c 141 4
<6>[ 9804.969458] [7:
mc_log: 3354] MobiCore mcd: e01|SYNAFP: vfmInit.
c 177 4
<6>[ 9804.969470] [7:
mc_log: 3354] MobiCore mcd: e01|SYNAFP: vfmInit.
c 198 4
<6>[ 9804.986550] [5:
mc_log: 3354] MobiCore mcd: e01|Trustlet Fingerpr
int::Returning 0
<6>[ 9804.999305] [4:
mc_log: 3354] MobiCore mcd: 104| SMGNT send MSG_C
LOSE_DRIVER for thread d02 to IPCH
<6>[ 9804.999328] [4:
mc_log: 3354] MobiCore mcd: d02|Driver SPI receiv
es MSG_CLOSE_DRIVER[0x00040001, 0x00000000]
<6>[ 9805.002632] [4:
mc_log: 3354] MobiCore mcd: 104| SMGNT send MSG_C
LOSE_TRUSTLET for thread d02 to IPCH
<6>[ 9805.002650] [4:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 202 (UUID=02010000-0000-0000-0000-000000005000) (server 0/8 status i
s 00000001)
<6>[ 9805.005206] [4:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 302 (UUID=ffffffff-0000-0000-0000-000000000002) (server 1/8 status i
s 00000001)
<6>[ 9805.009299] [4:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 402 (UUID=ffffffff-0000-0000-0000-000000000001) (server 2/8 status i

s 00000001)
<6>[ 9805.009316] [4:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 501 (UUID=ffffffff-d000-0000-0000-00000000000a) (server 3/8 status i
s 00000001)
<6>[ 9805.010249] [7: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa270e0
<6>[ 9805.010271] [7: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9805.010308] [5:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9805.010328] [5:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9805.010348] [5:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work was
cancelled
<6>[ 9805.010922] [5:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9805.010956] [4:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 602 (UUID=ffffffff-d000-0000-0000-000000000016) (server 4/8 status i
s 00000001)
<6>[ 9805.012757] [4:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 702 (UUID=07050500-0000-0000-0000-000000000000) (server 5/8 status i
s 00000001)
<6>[ 9805.014355] [5:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 7a 17 51 00 0e 00 14 06 00
<6>[ 9805.015021] [6:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 36 19 4f 00 00 00
<6>[ 9805.015319] [4:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to d02 (UUID=ffffffff-d000-0000-0000-00000000000e) (server 6/8 status i
s 00000000)
<6>[ 9805.019305] [4:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 902 (UUID=ffffffff-d000-0000-0000-000000000014) (server 7/8 status i
s 00000001)
<6>[ 9805.019319] [4:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop do
ne
<6>[ 9805.019331] [4:
mc_log: 3354] MobiCore mcd: 501|drTima: MSG_CLOSE
_TRUSTLET call 0x40001
<6>[ 9805.020328] [4:
mc_log: 3354] MobiCore mcd: 104| SMGNT smgntClose
Session done
<6>[ 9805.022628] [6:
mc_log: 3354] MobiCore mcd: 104| SMGNT send MSG_C
LOSE_TRUSTLET for thread e01 to IPCH
<6>[ 9805.025974] [7:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 202 (UUID=02010000-0000-0000-0000-000000005000) (server 0/7 status i
s 00000001)
<6>[ 9805.025993] [7:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 302 (UUID=ffffffff-0000-0000-0000-000000000002) (server 1/7 status i
s 00000001)
<6>[ 9805.027516] [5:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 36 19 4f 00 15 00 02 04 00
<6>[ 9805.027859] [7:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 402 (UUID=ffffffff-0000-0000-0000-000000000001) (server 2/7 status i
s 00000001)
<6>[ 9805.030323] [7:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 501 (UUID=ffffffff-d000-0000-0000-00000000000a) (server 3/7 status i
s 00000001)
<6>[ 9805.032492] [7:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 602 (UUID=ffffffff-d000-0000-0000-000000000016) (server 4/7 status i
s 00000001)
<6>[ 9805.035987] [4:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 702 (UUID=07050500-0000-0000-0000-000000000000) (server 5/7 status i
s 00000001)
<6>[ 9805.036012] [4:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 902 (UUID=ffffffff-d000-0000-0000-000000000014) (server 7/7 status i

s 00000001)
<6>[ 9805.036026] [4:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop do
ne
<6>[ 9805.039144] [4:
mc_log: 3354] MobiCore mcd: 501|drTima: MSG_CLOSE
_TRUSTLET call 0x40001
<6>[ 9805.039164] [4:
mc_log: 3354] MobiCore mcd: 104| SMGNT smgntClose
Session done
<3>[ 9805.049717] [7: POSIX timer 0: 6378] MobiCore mcd: closed by PID(6378),
name(POSIX timer 0)
<6>[ 9805.049796] [7: POSIX timer 0: 6378] vfsspi_suspend
<6>[ 9805.049819] [7: POSIX timer 0: 6378] vfsspi_ioctl_disable_spi_clock DISA
BLE_SPI_CLOCK
<6>[ 9805.102693] [7:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 37 19 43 00 00 00
<6>[ 9805.110749] [5:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 b3
00 80 03 01 02 37 19 43 00 a7 00 02 04 00
<6>[ 9805.318942] [7: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9805.319083] [5:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[ 9805.319102] [5:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[ 9805.319120] [5:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9805.319351] [5:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[ 9806.004526] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa27150
<6>[ 9806.004606] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9806.004876] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9806.004927] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9806.004974] [0:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work was
cancelled
<6>[ 9806.008928] [1:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 7b 17 51 00 0e 00 14 06 00
<6>[ 9806.010012] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9806.010993] [1:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 38 19 4f 00 00 00
<6>[ 9806.018357] [2:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 38 19 4f 00 15 00 02 04 00
<6>[ 9806.098324] [2:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 40
00 80 03 01 04 7c 17 82 00 34 00 01 08 00
<6>[ 9806.307565] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9806.307847] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[ 9806.307899] [0:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[ 9806.307958] [0:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9806.308194] [0:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[ 9807.164582] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [P] tID:0 tc:1 tm
:0
<6>[ 9807.196118] [0: thread_hotplug:13461] frequency info : 800000, prev_cmd 0
, exe_cmd 4
<6>[ 9807.196152] [0: thread_hotplug:13461] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0

<6>[ 9807.196171] [0: thread_hotplug:13461] cluster1 cores hotplug out : 0


<6>[ 9807.222134] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [R] tID:0 mc: 4 t
c:0 Ver[005683000]
<6>[ 9807.286878] [4:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 39 19 43 00 00 00
<6>[ 9807.288498] [7: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa260b0
<6>[ 9807.288517] [7: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9807.289281] [6:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9807.289297] [6:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9807.289307] [6:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work was
cancelled
<6>[ 9807.289892] [6:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9807.295947] [0: thread_hotplug:13461] frequency info : 1000000, prev_cmd
0, exe_cmd 4
<6>[ 9807.295969] [0: thread_hotplug:13461] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9807.295984] [0: thread_hotplug:13461] cluster1 cores hotplug out : 0
<6>[ 9807.306199] [6:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 a9
00 80 03 01 02 39 19 43 00 9d 00 02 04 00
<6>[ 9807.306435] [6:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 7d 17 51 00 0e 00 14 06 00
<6>[ 9807.306821] [6:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 3a 19 4f 00 00 00
<6>[ 9807.317165] [4:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 3a 19 4f 00 15 00 02 04 00
<6>[ 9807.351713] [2:PhotonicModulat: 5207] dsim_panel_set_brightness : platfor
m : 40, : mapping : 53, real : 53, index : 33, interpolation : 0
<6>[ 9807.355251] [5:PhotonicModulat: 5207] dsim_panel_get_elvssoffset 0
<6>[ 9807.355294] [5:PhotonicModulat: 5207] vint: 21
<6>[ 9807.355352] [5:PhotonicModulat: 5207] acl : 2, opr: 12
<6>[ 9807.355361] [5:PhotonicModulat: 5207] acl: 2(50), auto_brightness: 0
<6>[ 9807.355383] [5:PhotonicModulat: 5207] dsim_panel_set_tset temperature: 25
, tset: 25
<6>[ 9807.355403] [5:PhotonicModulat: 5207] hbm: 0, auto_brightness: 0
<6>[ 9807.395983] [0: thread_hotplug:13461] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[ 9807.396003] [0: thread_hotplug:13461] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9807.396015] [0: thread_hotplug:13461] cluster1 cores hotplug out : 0
<6>[ 9807.398564] [5: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9807.398594] [7:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[ 9807.398608] [7:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[ 9807.398622] [7:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9807.398808] [7:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[ 9807.435797] [5:PhotonicModulat: 5207] dsim_panel_set_brightness : platfor
m : 30, : mapping : 39, real : 39, index : 28, interpolation : 0
<4>[ 9807.442498] I[0:
ksoftirqd/0:
3] DHCP - 0x108 [RX]
<6>[ 9807.450109] [5:PhotonicModulat: 5207] dsim_panel_get_elvssoffset 0
<6>[ 9807.450148] [5:PhotonicModulat: 5207] vint: 21
<6>[ 9807.450202] [5:PhotonicModulat: 5207] acl : 2, opr: 12
<6>[ 9807.450211] [5:PhotonicModulat: 5207] acl: 2(50), auto_brightness: 0
<6>[ 9807.450232] [5:PhotonicModulat: 5207] dsim_panel_set_tset temperature: 25

, tset: 25
<6>[ 9807.450251] [5:PhotonicModulat: 5207] hbm: 0, auto_brightness: 0
<6>[ 9807.469490] [0:PhotonicModulat: 5207] dsim_panel_set_brightness : platfor
m : 25, : mapping : 27, real : 27, index : 22, interpolation : 0
<6>[ 9807.483731] [5:PhotonicModulat: 5207] dsim_panel_get_elvssoffset 0
<6>[ 9807.483771] [5:PhotonicModulat: 5207] vint: 21
<6>[ 9807.483825] [5:PhotonicModulat: 5207] acl : 2, opr: 12
<6>[ 9807.483833] [5:PhotonicModulat: 5207] acl: 2(50), auto_brightness: 0
<6>[ 9807.483854] [5:PhotonicModulat: 5207] dsim_panel_set_tset temperature: 25
, tset: 25
<6>[ 9807.483873] [5:PhotonicModulat: 5207] hbm: 0, auto_brightness: 0
<6>[ 9807.799298] [0: thread_hotplug:13461] frequency info : 1000000, prev_cmd
0, exe_cmd 4
<6>[ 9807.799323] [0: thread_hotplug:13461] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9807.799338] [0: thread_hotplug:13461] cluster1 cores hotplug out : 0
<6>[ 9808.241163] [2: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26120
<6>[ 9808.241206] [2: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9808.241257] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9808.241280] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9808.241302] [1:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work was
cancelled
<6>[ 9808.241953] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9808.247036] [0:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 9d
00 80 03 01 04 7e 17 4e 00 91 00 10 02 00
<6>[ 9808.249850] [0:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 54
00 80 03 01 04 7f 17 61 00 48 00 10 05 00
<6>[ 9808.275530] [0: irq/15-SSP_Int: 1775] [SSP] [M] AR-0,937,7118,3816,180,20
,0,0
<6>[ 9808.327606] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [P] tID:0 tc:1 tm
:0
<6>[ 9808.399702] [0: thread_hotplug:13461] frequency info : 800000, prev_cmd 0
, exe_cmd 4
<6>[ 9808.399733] [0: thread_hotplug:13461] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9808.399752] [0: thread_hotplug:13461] cluster1 cores hotplug out : 0
<6>[ 9808.408297] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [R] tID:0 mc: 6 t
c:0 Ver[005683000]
<6>[ 9808.458794] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9808.458846] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[ 9808.458883] [0:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[ 9808.458906] [0:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9808.459104] [0:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[ 9808.500287] [0: thread_hotplug:13461] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[ 9808.500308] [0: thread_hotplug:13461] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9808.500319] [0: thread_hotplug:13461] cluster1 cores hotplug out : 0
<6>[ 9808.999290] [0: thread_hotplug:13461] frequency info : 1000000, prev_cmd
0, exe_cmd 4
<6>[ 9808.999321] [0: thread_hotplug:13461] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0

<6>[ 9808.999336] [0: thread_hotplug:13461] cluster1 cores hotplug out : 0


<6>[ 9809.459658] [0: kworker/u16:3: 8924] [mhi_initiate_m3] Entered MHI state
4, Pending M0 0 Pending M3 0
<6>[ 9809.459731] [0: kworker/u16:3: 8924] [mhi_initiate_m3] Triggering wake o
ut of M2
<6>[ 9809.470281] [0: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26160
<6>[ 9809.470412] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9809.470685] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9809.470720] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9809.470752] [1:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9809.471668] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9809.471805] [3: kworker/u16:3: 8924] [mhi_initiate_m3] Cancelled M1 time
r, timer was active
<6>[ 9809.472033] [3: kworker/u16:3: 8924] [mhi_initiate_m3] Waiting for M3 co
mpletion.
<6>[ 9809.480970] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9809.481105] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 5
<6>[ 9809.481144] [1:MHI_STATE_THREA: 4605] [process_M3_transition] Processing
M3 state transition
<6>[ 9809.481325] [3: kworker/u16:3: 8924] [mhi_initiate_m3] M3 completion rec
eived
<6>[ 9809.481377] [3: kworker/u16:3: 8924] [mhi_turn_off_pcie_link] Entered...
<6>[ 9809.492872] [0: kworker/u16:3: 8924] mhi 0000:01:00.0: [debug] pmcsr reg
: b dev->current_state : 0
<6>[ 9809.493073] [0: kworker/u16:3: 8924] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9809.493185] [0: kworker/u16:3: 8924] exynos-pcie 10ee0000.pcie0: ack mes
sage is ok
<6>[ 9809.493230] [0: kworker/u16:3: 8924] exynos-pcie 10ee0000.pcie0: receive
d Enter_L23_READY DLLP packet
<6>[ 9809.493283] [0: kworker/u16:3: 8924] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[ 9809.493458] [0: kworker/u16:3: 8924] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[ 9809.523497] [0: kworker/u16:3: 8924] [mhi_turn_off_pcie_link] Exited...
<6>[ 9810.222710] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [P] tID:0 tc:1 tm
:0
<6>[ 9810.294279] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [R] tID:0 mc: 5 t
c:0 Ver[005683000]
<6>[ 9810.302691] [0: thread_hotplug:13461] frequency info : 800000, prev_cmd 0
, exe_cmd 4
<6>[ 9810.302726] [0: thread_hotplug:13461] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9810.302745] [0: thread_hotplug:13461] cluster1 cores hotplug out : 0
<4>[ 9810.395949] I[0:
Binder_B: 5860] DHCP - 0x108 [RX]
<6>[ 9810.402635] [0: thread_hotplug:13461] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[ 9810.402656] [0: thread_hotplug:13461] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9810.402668] [0: thread_hotplug:13461] cluster1 cores hotplug out : 0
<6>[ 9810.802625] [0: thread_hotplug:13461] frequency info : 1000000, prev_cmd
0, exe_cmd 4
<6>[ 9810.802649] [0: thread_hotplug:13461] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0

<6>[ 9810.802663] [0: thread_hotplug:13461] cluster1 cores hotplug out : 0


<6>[ 9811.592744] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [P] tID:0 tc:1 tm
:0
<6>[ 9811.602813] [0: thread_hotplug:13461] frequency info : 900000, prev_cmd 0
, exe_cmd 4
<6>[ 9811.602858] [0: thread_hotplug:13461] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9811.602876] [0: thread_hotplug:13461] cluster1 cores hotplug out : 0
<6>[ 9811.684837] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [R] tID:0 mc: 7 t
c:0 Ver[005683000]
<6>[ 9811.702726] [0: thread_hotplug:13461] frequency info : 1000000, prev_cmd
0, exe_cmd 4
<6>[ 9811.702751] [0: thread_hotplug:13461] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9811.702766] [0: thread_hotplug:13461] cluster1 cores hotplug out : 0
<6>[ 9811.790666] I[0:
swapper/0:
0] exynos-pcie 10ee0000.pcie0: cp2ap_w
ake irq involked
<6>[ 9811.790702] [0:
kworker/0:0:13589] exynos-pcie 10ee0000.pcie0: PCIe: W
ake work for RC0
<6>[ 9811.790721] [0:
kworker/0:0:13589] exynos-pcie 10ee0000.pcie0: Callbac
k for the event : 4
<6>[ 9811.790734] [0:
kworker/0:0:13589] [mhi_link_state_cb] Received MSM_PC
IE_EVENT_WAKE
<6>[ 9811.790776] [4:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 10
<6>[ 9811.790790] [4:MHI_STATE_THREA: 4605] [process_WAKE_transition] Entered
<6>[ 9811.790800] [4:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[ 9811.790811] [4:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, start of poweron, pcie state: 0
<6>[ 9811.802609] [0: thread_hotplug:13461] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[ 9811.802630] [0: thread_hotplug:13461] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9811.802641] [0: thread_hotplug:13461] cluster1 cores hotplug out : 0
<6>[ 9811.829612] [4:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: D state
: 0, 8d3000
<6>[ 9811.845892] [4:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_reset: Link up : 0x03687d11
<6>[ 9811.846172] [4:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, end of poweron, pcie state: 3
<6>[ 9811.859468] [4:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] pmcsr reg
: 8 dev->current_state : 3
<6>[ 9811.859644] [4:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9811.859656] [4:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
y for the link of RC0
<6>[ 9811.859666] [4:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
config space of RC0 and its EP
<6>[ 9811.859674] [4:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
RC0
<6>[ 9811.859704] [4:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
EP of RC0
<6>[ 9811.860083] [4:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Refresh
ing the saved config space in PCI framework for RC0 and its EP
<6>[ 9811.865187] [4:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[ 9811.865198] [4:MHI_STATE_THREA: 4605] [process_WAKE_transition] MHI is in
itialized, transitioning to M0.
<6>[ 9811.865208] [4:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Entered MHI state
5, Pending M0 0 Pending M3 0
<6>[ 9811.865217] [4:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Waiting for M0 M1

or M3. Currently 5...


<6>[ 9811.865226] [4:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Wait complete sta
te: 5
<6>[ 9811.865235] [4:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[ 9811.865243] [4:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[ 9811.865251] [4:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Setting M0 ...
<6>[ 9811.865337] [4:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Exited...
<6>[ 9811.865345] [4:MHI_STATE_THREA: 4605] [process_WAKE_transition] Exited.
<6>[ 9811.865981] [1: irq/15-SSP_Int: 1775] [SSP] [M] PD: BaroDisabled
<6>[ 9811.868168] [7: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 5 link 1, ring type 2, index 0 db 0x5fa26180
<6>[ 9811.868185] [7: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9811.868208] [4:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9811.868218] [4:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9811.868228] [4:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9811.868724] [4:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9811.872222] [5:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 80 17 51 00 0e 00 14 06 00
<6>[ 9811.872698] [4:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 3b 19 4f 00 00 00
<6>[ 9811.886058] [5:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 3b 19 4f 00 15 00 02 04 00
<6>[ 9812.094881] [7: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9812.094916] [4:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[ 9812.094930] [4:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[ 9812.094943] [4:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9812.095132] [4:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[ 9812.202646] [0: thread_hotplug:13461] frequency info : 1000000, prev_cmd
0, exe_cmd 4
<6>[ 9812.202672] [0: thread_hotplug:13461] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9812.202687] [0: thread_hotplug:13461] cluster1 cores hotplug out : 0
<6>[ 9812.225245] [1: irq/15-SSP_Int: 1775] [SSP] [M] AR-0,1435,7015,3802,180,2
0,0,0
<6>[ 9813.096429] [1: kworker/u16:3: 8924] [mhi_initiate_m3] Entered MHI state
4, Pending M0 0 Pending M3 0
<6>[ 9813.096508] [1: kworker/u16:3: 8924] [mhi_initiate_m3] Triggering wake o
ut of M2
<6>[ 9813.105196] [0: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa261d0
<6>[ 9813.105306] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9813.105452] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9813.105498] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9813.105543] [0:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9813.110108] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9813.110259] [1: kworker/u16:3: 8924] [mhi_initiate_m3] Cancelled M1 time
r, timer was active
<6>[ 9813.110506] [1: kworker/u16:3: 8924] [mhi_initiate_m3] Waiting for M3 co
mpletion.

<6>[ 9813.123801] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re


ceived ring 0x0
<6>[ 9813.124013] [3:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 5
<6>[ 9813.124068] [3:MHI_STATE_THREA: 4605] [process_M3_transition] Processing
M3 state transition
<6>[ 9813.124190] [0: kworker/u16:3: 8924] [mhi_initiate_m3] M3 completion rec
eived
<6>[ 9813.124259] [0: kworker/u16:3: 8924] [mhi_turn_off_pcie_link] Entered...
<6>[ 9813.136406] [0: kworker/u16:3: 8924] mhi 0000:01:00.0: [debug] pmcsr reg
: b dev->current_state : 0
<6>[ 9813.136608] [0: kworker/u16:3: 8924] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9813.136724] [0: kworker/u16:3: 8924] exynos-pcie 10ee0000.pcie0: ack mes
sage is ok
<6>[ 9813.136771] [0: kworker/u16:3: 8924] exynos-pcie 10ee0000.pcie0: receive
d Enter_L23_READY DLLP packet
<6>[ 9813.136828] [0: kworker/u16:3: 8924] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[ 9813.137007] [0: kworker/u16:3: 8924] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[ 9813.167074] [0: kworker/u16:3: 8924] [mhi_turn_off_pcie_link] Exited...
<6>[ 9814.002461] I[1: irq/15-SSP_Int: 1775] [SSP] ssp_sensorhub_list(4): 1, 1,
7, -1
<6>[ 9814.002671] [1: irq/15-SSP_Int: 1775] [SSP] [M] SSP Rotation Mode 0
<6>[ 9814.002759] [0:ssp_sensorhub_t: 1783] wakeup source sensorhub activation
skipped
<6>[ 9814.004249] I[2:SensorHubServic: 3439] [SSP] ssp_sensorhub_read(4): 1, 1,
7, -1
<6>[ 9814.204466] [1: irq/15-SSP_Int: 1775] [SSP] [M] ACVH 0 0 0 0 1 0
<6>[ 9814.204466] [1: irq/15-SSP_Int: 1775]
<6>[ 9815.329402] [3: kworker/u16:3: 8924] [SSP] debug_work_func: (63) - Senso
r state: 0x1fc3febf, RC: 1, CC: 0 DC: 0 TC: 0
<6>[ 9815.329463] [3: kworker/u16:3: 8924] [SSP] 0 : 69, 112, 8158 (200ms, 0ms
)
<6>[ 9815.329493] [2: kworker/u16:26:32550] vfsspi_work_func_debug ldo: 3, slee
p: 0, irq: 0, tz: 1, type: viper
<6>[ 9815.329557] [3: kworker/u16:3: 8924] [SSP] 9 : 177, 111, 96, 363, 245, 3
(200ms)
<6>[ 9815.329596] [3: kworker/u16:3: 8924] [SSP] 13 : 1(1ms)
<6>[ 9815.604165] I[0:
swapper/0:
0] exynos-pcie 10ee0000.pcie0: cp2ap_w
ake irq involked
<6>[ 9815.604303] [0:
kworker/0:1:25228] exynos-pcie 10ee0000.pcie0: PCIe: W
ake work for RC0
<6>[ 9815.604363] [0:
kworker/0:1:25228] exynos-pcie 10ee0000.pcie0: Callbac
k for the event : 4
<6>[ 9815.604405] [0:
kworker/0:1:25228] [mhi_link_state_cb] Received MSM_PC
IE_EVENT_WAKE
<6>[ 9815.604653] [3:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 10
<6>[ 9815.604705] [3:MHI_STATE_THREA: 4605] [process_WAKE_transition] Entered
<6>[ 9815.604752] [3:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[ 9815.604805] [3:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, start of poweron, pcie state: 0
<6>[ 9815.639213] [1: irq/15-SSP_Int: 1775] [SSP] [M] ACVH 0 0 0 0 0 0
<6>[ 9815.639213] [1: irq/15-SSP_Int: 1775]
<6>[ 9815.643351] [3:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: D state
: 0, b92700
<6>[ 9815.659901] [3:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_reset: Link up : 0x03dfa411

<6>[ 9815.660393] [3:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_


pcie_poweron, end of poweron, pcie state: 3
<6>[ 9815.673029] [3:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] pmcsr reg
: 8 dev->current_state : 3
<6>[ 9815.673196] [3:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9815.673247] [3:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
y for the link of RC0
<6>[ 9815.673293] [3:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
config space of RC0 and its EP
<6>[ 9815.673335] [3:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
RC0
<6>[ 9815.673423] [3:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
EP of RC0
<6>[ 9815.673888] [3:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Refresh
ing the saved config space in PCI framework for RC0 and its EP
<6>[ 9815.679272] [3:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[ 9815.679328] [3:MHI_STATE_THREA: 4605] [process_WAKE_transition] MHI is in
itialized, transitioning to M0.
<6>[ 9815.679375] [3:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Entered MHI state
5, Pending M0 0 Pending M3 0
<6>[ 9815.679423] [3:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Waiting for M0 M1
or M3. Currently 5...
<6>[ 9815.679468] [3:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Wait complete sta
te: 5
<6>[ 9815.679512] [3:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[ 9815.679552] [3:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[ 9815.679595] [3:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Setting M0 ...
<6>[ 9815.679828] [3:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Exited...
<6>[ 9815.679869] [3:MHI_STATE_THREA: 4605] [process_WAKE_transition] Exited.
<6>[ 9815.681495] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 5 link 1, ring type 2, index 0 db 0x5fa261f0
<6>[ 9815.681554] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9815.681789] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9815.681839] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9815.681885] [0:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9815.686014] [1:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 81 17 51 00 0e 00 14 06 00
<6>[ 9815.686278] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9815.690874] [1:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 3c 19 4f 00 00 00
<6>[ 9815.694632] [1:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 3c 19 4f 00 15 00 02 04 00
<6>[ 9815.904184] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9815.907185] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[ 9815.907264] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[ 9815.907321] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9815.907554] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[ 9815.913019] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26240
<6>[ 9815.913096] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0

<6>[ 9815.913368] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni


ng to 2
<6>[ 9815.913430] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9815.913476] [2:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work was
cancelled
<6>[ 9815.916227] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9815.918233] [2:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 82 17 51 00 0e 00 14 06 00
<6>[ 9815.918773] [2:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 9d
00 80 03 01 04 83 17 4e 00 91 00 10 02 00
<6>[ 9815.919386] [2:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 54
00 80 03 01 04 84 17 61 00 48 00 10 05 00
<6>[ 9815.919621] [3:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 3d 19 4f 00 00 00
<6>[ 9815.931797] [2:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 3d 19 4f 00 15 00 02 04 00
<6>[ 9816.089633] [2:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 85 17 51 00 0e 00 14 06 00
<6>[ 9816.090940] [0:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 3e 19 4f 00 00 00
<6>[ 9816.100187] [2:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 3e 19 4f 00 15 00 02 04 00
<6>[ 9816.178057] [1: irq/15-SSP_Int: 1775] [SSP] [M] AR-0,5,93,8164,180,20,0,0
<6>[ 9816.178057] [1: irq/15-SSP_Int: 1775] ACVH 1 0 0 1 0 0
<6>[ 9816.178057] [1: irq/15-SSP_Int: 1775]
<6>[ 9816.241622] [1:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 3f 19 43 00 00 00
<6>[ 9816.250747] [2:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 b3
00 80 03 01 02 3f 19 43 00 a7 00 02 04 00
<6>[ 9816.459836] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9816.460023] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[ 9816.460076] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[ 9816.460139] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9816.460374] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[ 9817.076276] [1: irq/15-SSP_Int: 1775] [SSP] [M] save bak odr 0, 1, 20, 20
, 0
<6>[ 9817.076276] [1: irq/15-SSP_Int: 1775] save bak odr 0, 0, 20, 20, 0
<6>[ 9817.076276] [1: irq/15-SSP_Int: 1775] AD 0 7 1 6, 60
<6>[ 9817.076276] [1: irq/15-SSP_Int: 1775] save bak odr 0, 1, 20, 20, 0
<6>[ 9817.076276] [1: irq/15-SSP_Int: 1775] save bak odr 0, 0, 20, 20, 0
<6>[ 9817.076276] [1: irq/15-SSP_Int: 1775] RM 0 6 1 5 20
<6>[ 9817.076276] [1: irq/15-SSP_Int: 1775] SSP SIGNI Change1
<6>[ 9817.462854] [2: kworker/u16:3: 8924] [mhi_initiate_m3] Entered MHI state
4, Pending M0 0 Pending M3 0
<6>[ 9817.462897] [2: kworker/u16:3: 8924] [mhi_initiate_m3] Triggering wake o
ut of M2
<6>[ 9817.464803] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26300
<6>[ 9817.464842] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9817.465040] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9817.465068] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9817.465090] [2:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started

<6>[ 9817.465802] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Exited


<6>[ 9817.465894] [3: kworker/u16:3: 8924] [mhi_initiate_m3] Cancelled M1 time
r, timer was active
<6>[ 9817.466192] [3: kworker/u16:3: 8924] [mhi_initiate_m3] Waiting for M3 co
mpletion.
<6>[ 9817.475047] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9817.475264] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 5
<6>[ 9817.475290] [2:MHI_STATE_THREA: 4605] [process_M3_transition] Processing
M3 state transition
<6>[ 9817.475437] [3: kworker/u16:3: 8924] [mhi_initiate_m3] M3 completion rec
eived
<6>[ 9817.475474] [3: kworker/u16:3: 8924] [mhi_turn_off_pcie_link] Entered...
<6>[ 9817.486270] [3: kworker/u16:3: 8924] mhi 0000:01:00.0: [debug] pmcsr reg
: b dev->current_state : 0
<6>[ 9817.486423] [3: kworker/u16:3: 8924] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9817.486507] [3: kworker/u16:3: 8924] exynos-pcie 10ee0000.pcie0: ack mes
sage is ok
<6>[ 9817.486530] [3: kworker/u16:3: 8924] exynos-pcie 10ee0000.pcie0: receive
d Enter_L23_READY DLLP packet
<6>[ 9817.486558] [3: kworker/u16:3: 8924] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[ 9817.486678] [3: kworker/u16:3: 8924] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[ 9817.516665] [3: kworker/u16:3: 8924] [mhi_turn_off_pcie_link] Exited...
<6>[ 9817.613667] [1: irq/15-SSP_Int: 1775] [SSP] [M] PD: R->W
<6>[ 9817.613667] [1: irq/15-SSP_Int: 1775] save bak odr 0, 1, 20, 20, 0
<6>[ 9817.613667] [1: irq/15-SSP_Int: 1775] save bak odr 0, 0, 20, 20, 0
<6>[ 9817.613667] [1: irq/15-SSP_Int: 1775] AD 0 7 1 6, 60
<6>[ 9817.613667] [1: irq/15-SSP_Int: 1775] save bak odr 0, 1, 20, 20, 0
<6>[ 9817.613667] [1: irq/15-SSP_Int: 1775] save bak odr 0, 0, 20, 20, 0
<6>[ 9817.613667] [1: irq/15-SSP_Int: 1775] RM 0 6 1 5 20
<6>[ 9818.191525] I[0:
swapper/0:
0] exynos-pcie 10ee0000.pcie0: cp2ap_w
ake irq involked
<6>[ 9818.191661] [0:
kworker/0:1:25228] exynos-pcie 10ee0000.pcie0: PCIe: W
ake work for RC0
<6>[ 9818.191719] [0:
kworker/0:1:25228] exynos-pcie 10ee0000.pcie0: Callbac
k for the event : 4
<6>[ 9818.191760] [0:
kworker/0:1:25228] [mhi_link_state_cb] Received MSM_PC
IE_EVENT_WAKE
<6>[ 9818.192058] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 10
<6>[ 9818.192111] [2:MHI_STATE_THREA: 4605] [process_WAKE_transition] Entered
<6>[ 9818.192155] [2:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[ 9818.192208] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, start of poweron, pcie state: 0
<6>[ 9818.229927] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: D state
: 0, 8cb100
<6>[ 9818.245421] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_reset: Link up : 0x036c6b11
<6>[ 9818.245978] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, end of poweron, pcie state: 3
<6>[ 9818.259728] [2:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] pmcsr reg
: 8 dev->current_state : 3
<6>[ 9818.259895] [2:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9818.259950] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
y for the link of RC0

<6>[ 9818.259995] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover


config space of RC0 and its EP
<6>[ 9818.260038] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
RC0
<6>[ 9818.260126] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
EP of RC0
<6>[ 9818.260588] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Refresh
ing the saved config space in PCI framework for RC0 and its EP
<6>[ 9818.265977] [2:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[ 9818.266031] [2:MHI_STATE_THREA: 4605] [process_WAKE_transition] MHI is in
itialized, transitioning to M0.
<6>[ 9818.266081] [2:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Entered MHI state
5, Pending M0 0 Pending M3 0
<6>[ 9818.266128] [2:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Waiting for M0 M1
or M3. Currently 5...
<6>[ 9818.266172] [2:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Wait complete sta
te: 5
<6>[ 9818.266215] [2:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[ 9818.266255] [2:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[ 9818.266298] [2:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Setting M0 ...
<6>[ 9818.266531] [2:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Exited...
<6>[ 9818.266571] [2:MHI_STATE_THREA: 4605] [process_WAKE_transition] Exited.
<6>[ 9818.268848] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 5 link 1, ring type 2, index 0 db 0x5fa26320
<6>[ 9818.268907] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9818.269110] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9818.269158] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9818.269205] [2:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9818.273107] [0:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 86 17 51 00 0e 00 14 06 00
<6>[ 9818.273433] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9818.274975] [1:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 40 19 4f 00 00 00
<6>[ 9818.287822] [0:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 40 19 4f 00 15 00 02 04 00
<4>[ 9818.374684] I[0: surfaceflinger: 3350] DHCP - 0x108 [RX]
<6>[ 9818.497360] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9818.497470] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[ 9818.497497] [0:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[ 9818.501470] [0:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9818.501685] [0:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[ 9819.502750] [0: kworker/u16:3: 8924] [mhi_initiate_m3] Entered MHI state
4, Pending M0 0 Pending M3 0
<6>[ 9819.502822] [0: kworker/u16:3: 8924] [mhi_initiate_m3] Triggering wake o
ut of M2
<6>[ 9819.512750] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26370
<6>[ 9819.512825] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9819.513094] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9819.513149] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Entered

<6>[ 9819.513193] [2:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT


cancelled, either running or never started
<6>[ 9819.518101] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9819.518332] [0: kworker/u16:3: 8924] [mhi_initiate_m3] Cancelled M1 time
r, timer was active
<6>[ 9819.518583] [0: kworker/u16:3: 8924] [mhi_initiate_m3] Waiting for M3 co
mpletion.
<6>[ 9819.531928] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9819.532214] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 5
<6>[ 9819.532266] [2:MHI_STATE_THREA: 4605] [process_M3_transition] Processing
M3 state transition
<6>[ 9819.532525] [0: kworker/u16:3: 8924] [mhi_initiate_m3] M3 completion rec
eived
<6>[ 9819.532657] [0: kworker/u16:3: 8924] [mhi_turn_off_pcie_link] Entered...
<6>[ 9819.546465] [0: kworker/u16:3: 8924] mhi 0000:01:00.0: [debug] pmcsr reg
: b dev->current_state : 0
<6>[ 9819.546670] [0: kworker/u16:3: 8924] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9819.546785] [0: kworker/u16:3: 8924] exynos-pcie 10ee0000.pcie0: ack mes
sage is ok
<6>[ 9819.546831] [0: kworker/u16:3: 8924] exynos-pcie 10ee0000.pcie0: receive
d Enter_L23_READY DLLP packet
<6>[ 9819.546886] [0: kworker/u16:3: 8924] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[ 9819.547066] [0: kworker/u16:3: 8924] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[ 9819.579108] [0: kworker/u16:3: 8924] [mhi_turn_off_pcie_link] Exited...
<6>[ 9820.308240] [1: irq/15-SSP_Int: 1775] [SSP] [M] AR-0,23,98,8166,180,20,0,
0
<6>[ 9820.646440] [3: [smart stay] : 4313] binder: 3995:4313 transaction faile
d 29189, size 200-8
<6>[ 9820.751375] I[0:
swapper/0:
0] exynos-pcie 10ee0000.pcie0: cp2ap_w
ake irq involked
<6>[ 9820.751556] [0:
kworker/0:1:25228] exynos-pcie 10ee0000.pcie0: PCIe: W
ake work for RC0
<6>[ 9820.751599] [0:
kworker/0:1:25228] exynos-pcie 10ee0000.pcie0: Callbac
k for the event : 4
<6>[ 9820.751628] [0:
kworker/0:1:25228] [mhi_link_state_cb] Received MSM_PC
IE_EVENT_WAKE
<6>[ 9820.751870] [3:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 10
<6>[ 9820.751908] [3:MHI_STATE_THREA: 4605] [process_WAKE_transition] Entered
<6>[ 9820.751939] [3:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[ 9820.751977] [3:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, start of poweron, pcie state: 0
<7>[ 9820.787427] [0:companionshotTh:13825] [@][0][COM:V] fimc_is_comp_video_op
en
<7>[ 9820.788627] [1:companionshotTh:13825] [@][COM:D] fimc_is_companion_runtim
e_resume(0)
<7>[ 9820.788703] [1:companionshotTh:13825] [@][RSC] rsctype : 3, rsccount : 1
<7>[ 9820.788940] [1:companionshotTh:13825] [@][0][COM:D] fimc_is_companion_ope
n():0
<6>[ 9820.789880] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: D state
: 0, 1f0e00
<6>[ 9820.790346] [1:companionshotTh:13825] sclk_isp_sensor1 : 24Mhz
<6>[ 9820.790392] [1:companionshotTh:13825] exynos7420_fimc_is_companion_mclk_o
n(1, mclk : 24000000)
<7>[ 9820.790552] [0: kworker/u16:3: 8924] [@] pin_ctrl(act(5), pin(0), val(1)

, nm(OIS_VDD_2.8V)
<7>[ 9820.790597] [0: kworker/u16:3: 8924] [@] pin_ctrl(act(5), pin(0), val(1)
, nm(OIS_VM_2.8V)
<7>[ 9820.790637] [0: kworker/u16:3: 8924] [@] pin_ctrl(act(1), pin(54), val(0
), nm(standby_low)
<7>[ 9820.790677] [0: kworker/u16:3: 8924] [@] pin_ctrl(act(1), pin(52), val(0
), nm(rst_low)
<7>[ 9820.790787] [0: kworker/u16:3: 8924] [@] pin_ctrl(act(5), pin(0), val(1)
, nm(VDDA_2.9V_VT)
<7>[ 9820.790829] [0: kworker/u16:3: 8924] [@] pin_ctrl(act(5), pin(0), val(1)
, nm(VDDIO_1.8V_VT)
<7>[ 9820.790868] [0: kworker/u16:3: 8924] [@] pin_ctrl(act(5), pin(0), val(1)
, nm(VDDD_1.2V_VT)
<7>[ 9820.790908] [0: kworker/u16:3: 8924] [@] pin_ctrl(act(5), pin(0), val(1)
, nm(VDDIO_1.8V_CAM)
<7>[ 9820.797854] [0:companionshotTh:13825] [@][fimc_is_power_binning::1391][BI
N_INFO::4, sel 4] read path(/data/camera/ISP_CV), DCDC PMIC(0.750V)
<7>[ 9820.797922] [0:companionshotTh:13825] [@] pin_ctrl(act(5), pin(0), val(1)
, nm(VDDD_RET_1.0V_COMP)
<7>[ 9820.797962] [0:companionshotTh:13825] [@] pin_ctrl(act(5), pin(0), val(1)
, nm(VDDA_1.8V_COMP)
<7>[ 9820.798002] [0:companionshotTh:13825] [@] pin_ctrl(act(5), pin(0), val(1)
, nm(VDDD_CORE_1.0V_COMP)
<7>[ 9820.798041] [0:companionshotTh:13825] [@] pin_ctrl(act(5), pin(0), val(1)
, nm(VDDD_NORET_0.9V_COMP)
<7>[ 9820.798080] [0:companionshotTh:13825] [@] pin_ctrl(act(5), pin(0), val(1)
, nm(VDDD_CORE_0.8V_COMP)
<6>[ 9820.798376] [0:companionshotTh:13825] exynos_fimc_is_module_pin_control :
regulator_set_voltage(1000000)
<4>[ 9820.800154] [0:companionshotTh:13825] VDDD_RET_1.0V_COMP regulator is alr
eady enabled
<6>[ 9820.806140] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_reset: Link up : 0x03f64811
<6>[ 9820.806638] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, end of poweron, pcie state: 3
<7>[ 9820.812895] [0:companionshotTh:13825] [@]workQueue is waited 0 times
<7>[ 9820.812932] [0:companionshotTh:13825] [@] pin_ctrl(act(1), pin(52), val(1
), nm(rst_high)
<7>[ 9820.812951] [0:companionshotTh:13825] [@] pin_ctrl(act(4), pin(0), val(2)
, nm(pin)
<7>[ 9820.812969] [0:companionshotTh:13825] [@] pin_ctrl(act(1), pin(55), val(1
), nm(comp_rst high)
<7>[ 9820.817985] [0:companionshotTh:13825] [@]already loaded the firmware, Pho
ne_Comp version=A16LSIJ0111, F-ROM_Comp version=A16LSIA0001
<7>[ 9820.819433] [0:companionshotTh:13825] [@]Companion validation: 0x73c2
<7>[ 9820.819464] [0:companionshotTh:13825] [@]fimc_is_comp_retention: start
<6>[ 9820.819659] [2:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] pmcsr reg
: 8 dev->current_state : 3
<6>[ 9820.819837] [2:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9820.819863] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
y for the link of RC0
<6>[ 9820.819884] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
config space of RC0 and its EP
<6>[ 9820.819903] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
RC0
<6>[ 9820.819952] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
EP of RC0
<6>[ 9820.820300] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Refresh
ing the saved config space in PCI framework for RC0 and its EP

<7>[ 9820.820968] [0:companionshotTh:13825] [@]0x0002 signature is same!


<7>[ 9820.823386] [1:companionshotTh:13825] [@]signature crc check success!
<7>[ 9820.825887] [1:companionshotTh:13825] [@]0x0002 signature is same!
<6>[ 9820.826001] [2:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[ 9820.826030] [2:MHI_STATE_THREA: 4605] [process_WAKE_transition] MHI is in
itialized, transitioning to M0.
<6>[ 9820.826052] [2:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Entered MHI state
5, Pending M0 0 Pending M3 0
<6>[ 9820.826073] [2:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Waiting for M0 M1
or M3. Currently 5...
<6>[ 9820.826093] [2:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Wait complete sta
te: 5
<6>[ 9820.826113] [2:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[ 9820.826130] [2:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[ 9820.826149] [2:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Setting M0 ...
<7>[ 9820.826260] [1:companionshotTh:13825] [@]fimc_is_companion_s_input: COMPA
NION STATE 1
<6>[ 9820.826351] [2:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Exited...
<6>[ 9820.826369] [2:MHI_STATE_THREA: 4605] [process_WAKE_transition] Exited.
<6>[ 9820.828529] [0: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 5 link 1, ring type 2, index 0 db 0x5fa26390
<6>[ 9820.828571] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9820.828625] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9820.828649] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9820.828670] [2:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9820.829470] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9820.832659] [1:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 87 17 51 00 0e 00 14 06 00
<6>[ 9820.834404] [1:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 41 19 4f 00 00 00
<7>[ 9820.835293] [2:companionshotTh:13825] [@]companion_imx240_master_setfile.
bin version : A16LSIJ0111MASTR
<7>[ 9820.840458] [2:companionshotTh:13825] [@]companion_imx240_mode_setfile.bi
n version : A16LSIJ0111MOD00
<7>[ 9820.840668] [2:companionshotTh:13825] [@][0][COM:D] fimc_is_companion_s_i
nput(0, 21):0
<6>[ 9820.847040] [1:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 41 19 4f 00 15 00 02 04 00
<7>[ 9820.882095] [2:
Binder_3: 5178] [@][0][SS1:V] fimc_is_ssx_video_ope
n
<4>[ 9820.882666] [2:
Binder_3: 5178] vdd_disp_cam0: Failed to create deb
ugfs directory
<7>[ 9820.883833] [2:
Binder_3: 5178] [@][SEN:D:0] fimc_is_sensor_runtime
_resume():0
<7>[ 9820.883877] [2:
Binder_3: 5178] [@][RSC] rsctype : 0, rsccount : 2
<7>[ 9820.883896] [2:
Binder_3: 5178] [@][0][SEN:D] fimc_is_sensor_open()
:0
<7>[ 9820.884083] [2:
Binder_3: 5178] [@][0]fimc_is_sensor_mclk_on : sens
or mclk will on with companion mclk.
<7>[ 9820.884619] [2:
Binder_3: 5178] [@]fimc_is_sensor_gpio_on : sensor
gpio is already on.
<7>[ 9820.884648] [2:
Binder_3: 5178] [@][0][SEN:D] fimc_is_sensor_s_inpu
t(21, 0):0
<7>[ 9820.884896] [2:
Binder_3: 5178] [@][0][I0S:V] fimc_is_ixs_video_ope
n
<7>[ 9820.885724] [2:
Binder_3: 5178] [@][0][SCP:V] fimc_is_scp_video_ope
n

<7>[ 9820.886425] [2:


Binder_3: 5178] [@][0][I0P:V] fimc_is_ixp_video_ope
n
<7>[ 9820.886779] [2:
Binder_3: 5178] [@][0][30S:V] fimc_is_3aa_video_ope
n
<7>[ 9820.889479] [2:
Binder_3: 5178] [@][0][30C:V] fimc_is_3xc_video_ope
n
<7>[ 9820.889835] [2:
Binder_3: 5178] [@][0][30P:V] fimc_is_3xp_video_ope
n
<7>[ 9820.892132] [2:
Binder_3: 5178] [@][0][DIS:V] fimc_is_dis_video_ope
n
<7>[ 9820.893538] [0:
Binder_3: 5178] [@] fwboot : 0x0
<7>[ 9820.894257] [0:
Binder_3: 5178] [@]FIMC_IS runtime resume in
<7>[ 9820.899588] [3:
Binder_3: 5178] [@][RSC] fimc_is_ischain_runtime_re
sume: QoS LOCK [INT(560000), MIF(1456000), CAM(540000)]
<7>[ 9820.900303] [3:
Binder_3: 5178] [@]FIMC-IS runtime resume out
<7>[ 9820.900331] [3:
Binder_3: 5178] [@] fwboot : 0x0
<7>[ 9820.912842] [3:
Binder_3: 5178] [@]Phone FW version : 7420 16216-20
15/12/31 14:16:41]A16LSIL02SM
<7>[ 9820.913444] [3:
Binder_3: 5178] [@]Camera: the default FW were appl
ied successfully.
<7>[ 9820.913500] [3:
Binder_3: 5178] [@]fimc_is_ischain_config_secure :
PA_FIMC_IS_GIC_C : 0x000000f8
<7>[ 9820.913526] [3:
Binder_3: 5178] [@]fimc_is_ischain_power(1):0
<7>[ 9820.913544] [3:
Binder_3: 5178] [@][RSC] rsctype : 2, rsccount : 3
<7>[ 9820.913563] [3:
Binder_3: 5178] [@][0][ISC:D] fimc_is_ischain_open(
):0
<7>[ 9820.913776] [3:
Binder_3: 5178] [@][RSC] cluster1 minfreq : 0Mhz
<7>[ 9820.913795] [3:
Binder_3: 5178] [@][RSC] cluster1 maxfreq : 1800Mhz
<7>[ 9820.915440] [3:
Binder_3: 5178] [@][ERR]get_sensor_mode:322:could n
ot find proper sensor mode: 2608x1960@112fps
<7>[ 9820.915466] [3:
Binder_3: 5178] [@][SEN:D:0] framerate: req@112fps,
cur@112fps
<7>[ 9820.915646] [3:
Binder_3: 5178] [@]sensor mode(652x488@112) = 4
<7>[ 9820.918261] [3:
Binder_3: 5178] [@][0] =STM CFG===============
<7>[ 9820.918285] [3:
Binder_3: 5178] [@][0] STM(N) PH: 01 -> GP0 ( 11 *1
2 ) => GP2 ( *32 ) -> GP4 ( 52 )
<7>[ 9820.918303] [3:
Binder_3: 5178] [@][0] DEVICE GRAPH : 0 2 4
<7>[ 9820.918319] [3:
Binder_3: 5178] [@][0] =======================
<7>[ 9820.918339] [3:
Binder_3: 5178] [@]CAL DATA : MAP ver : V003
<7>[ 9820.918355] [3:
Binder_3: 5178] [@]Camera : Front Sensor Version :
0x11
<7>[ 9820.918373] [3:
Binder_3: 5178] [@]eeprom_fw_version = B05LLHA01PM,
phone_fw_version = A16LSIL02SM, loaded_fw_version = A16LSIL02SM
<7>[ 9820.918403] [3:
Binder_3: 5178] [@]Front Camera : the dumped Cal. d
ata was applied successfully.
<7>[ 9820.918422] [0: kworker/0:2H:23569] [@]IS Version: 244.130 [0x03]
<7>[ 9820.918447] [3:
Binder_3: 5178] [@][0]calibration loading is succes
s
<7>[ 9820.975550] [0:
Binder_3: 5178] [@]SETFILE version : 151016_S5K4E6_
CML_C2_10632 2015/10/16/14:44 E7420
<7>[ 9820.976130] [0:
Binder_3: 5178] [@]Camera: the default Setfile were
applied successfully.
<7>[ 9820.980412] [1:
Binder_3: 5178] [@][0][ISC:D] stream off ready
<7>[ 9820.989676] [1:
Binder_3: 5178] [@]input & output sizes are same(65
2, 488)
<7>[ 9820.989732] [1:
Binder_3: 5178] [@][0][SEN:D] fimc_is_sensor_back_s
tart(652x488, 0)
<7>[ 9820.989887] [1:
Binder_3: 5178] [@][0][GP2]bufs: 06, init : 0, asyn
: 1, skip: 0, sync : 0
<7>[ 9820.990065] [1:
Binder_3: 5178] [@][0][GP0]bufs: 06, init : 3, asyn

: 3, skip: 3, sync : 2
<7>[ 9820.990106] [1:
Binder_3: 5178] [@][0] =GRP CFG===============
<7>[ 9820.990148] [1:
Binder_3: 5178] [@][0][GP0] SRC10:0652x0488
<7>[ 9820.990188] [1:
Binder_3: 5178] [@][0][GP0] CAP11:0652x0652
<7>[ 9820.990227] [1:
Binder_3: 5178] [@][0][GP0] CAP12:0624x0468
<7>[ 9820.990270] [1:
Binder_3: 5178] [@][0][GP2] SRC30:0624x0468
<7>[ 9820.990314] [1:
Binder_3: 5178] [@][0][GP4] SRC50:0624x0468
<7>[ 9820.990354] [1:
Binder_3: 5178] [@][0][GP4] CAP52:0624x0468
<7>[ 9820.990392] [1:
Binder_3: 5178] [@][0] =======================
<7>[ 9820.990430] [1:
Binder_3: 5178] [@][0] TPU FULL BYPASS
<7>[ 9820.998418] [1:
Binder_3: 5178] [@][RSC] fimc_is_dvfs_sel_table(1):
0
<7>[ 9820.998471] [1:
Binder_3: 5178] [@][0][ISC:D] fimc_is_ischain_start
(33):0
<7>[ 9820.999605] [2:fimc_is_gworker:13842] [@][0][3XP][F1]ot_crop[0, 0, 624, 4
68] on
<7>[ 9820.999657] [2:fimc_is_gworker:13842] [@][0][3XP][WRN]1 frame is drop
<7>[ 9821.000748] [1:
Binder_3: 5178] [@][0][CSI] settle(652x488@112) = 2
2
<7>[ 9821.000783] [2:fimc_is_gworker:13842] [@][0][3XP][WRN]2 frame is drop
<7>[ 9821.000843] [1:
Binder_3: 5178] [@][0][CSI] vci(0x32314742) = 1
<7>[ 9821.001944] [2:fimc_is_gworker:13842] [@][0][3XP][WRN]3 frame is drop
<7>[ 9821.002126] [1:
Binder_3: 5178] [@][0][ISC:D] stream on ready(3, 3)
<7>[ 9821.002182] [1:
Binder_3: 5178] [@][WRN]couldn't find static dvfs s
cenario [sensor:(1/0)/fps:112/setfile:33/scp size:(624/468)]
<7>[ 9821.002182] [1:
Binder_3: 5178]
<7>[ 9821.002250] [1:
Binder_3: 5178] [@][0][ISC:D] tbl[1] static scenari
o(0)-[]
<7>[ 9821.036809] [1:
Binder_3: 5178] [@]DTP checking...
<7>[ 9821.037422] [2:fimc_is_gworker:13842] [@][0][3XP][WRN]4 frame is drop
<7>[ 9821.042694] [2:fimc_is_gworker:13842] [@][0][3XP][WRN]5 frame is drop
<7>[ 9821.051616] [2:fimc_is_gworker:13842] [@][0][3XP][WRN]6 frame is drop
<6>[ 9821.056112] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9821.056267] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[ 9821.056317] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[ 9821.056373] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9821.056603] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<7>[ 9821.059526] I[0:
swapper/0:
0] [@]grp1(res 2, rcnt 0, scnt 6), grp
2(res 3, rcnt 0, scnt 0), fcount 7(0, 0) pcount 14
<7>[ 9821.068035] [0: kworker/0:2H:23569] [@][0][GP0][WRN] complete bufs : 4
<7>[ 9821.068432] I[0:
swapper/0:
0] [@]grp1(res 3, rcnt 0, scnt 6), grp
2(res 3, rcnt 0, scnt 0), fcount 8(0, 0) pcount 14
<7>[ 9821.076899] [0: kworker/0:2H:23569] [@][0][GP0][WRN] complete bufs : 5
<7>[ 9821.077437] I[0:
swapper/0:
0] [@]grp1(res 4, rcnt 0, scnt 6), grp
2(res 3, rcnt 0, scnt 0), fcount 9(0, 0) pcount 14
<7>[ 9821.077531] [0:
Binder_3: 5178] [@][0][ISC:D] stream off ready
<7>[ 9821.085892] [0: kworker/0:2H:23569] [@][0][GP0][WRN] complete bufs : 6
<7>[ 9821.093096] [1:
Binder_3: 5178] [@][0][FRT:D] fimc_is_sensor_front_
stop(0)
<7>[ 9821.093152] [1:
Binder_3: 5178] [@][FRT:D:0] instant off(fcount : 0
, time : 40ms)
<7>[ 9821.093247] [1:
Binder_3: 5178] [@][0][WRN]fimc_is_flite_stop, no w
aiting...
<7>[ 9821.093305] [1:
Binder_3: 5178] [@][0][BAK:D] fimc_is_sensor_back_s
top(0)

<7>[ 9821.093640] [1:


Binder_3: 5178] [@][0][WRN]video10 stream off : que
ued buffer is not empty(6)
<7>[ 9821.096928] [1:
Binder_3: 5178] [@][0][GP0] sensor fcount: 9, fcoun
t: 6
<7>[ 9821.096981] [1:
Binder_3: 5178] [@][0][GP0]fimc_is_ischain_3aa_stop
(6):0
<7>[ 9821.097021] [1:
Binder_3: 5178] [@][WRN]com frame1 is flushed(count
: 5)
<7>[ 9821.097058] [1:
Binder_3: 5178] [@][WRN]com frame2 is flushed(count
: 4)
<7>[ 9821.097095] [1:
Binder_3: 5178] [@][WRN]com frame3 is flushed(count
: 3)
<7>[ 9821.097131] [1:
Binder_3: 5178] [@][WRN]com frame4 is flushed(count
: 2)
<7>[ 9821.097167] [1:
Binder_3: 5178] [@][WRN]com frame5 is flushed(count
: 1)
<7>[ 9821.097204] [1:
Binder_3: 5178] [@][WRN]com frame6 is flushed(count
: 0)
<7>[ 9821.098598] [1:
Binder_3: 5178] [@][0][WRN]already process stop
<7>[ 9821.099486] [3:
Binder_3: 5178] [@][0][GP2]fimc_is_ischain_isp_stop
(0):0
<7>[ 9821.100462] [3:
Binder_3: 5178] [@]sensor mode(652x488@112) = 4
<7>[ 9821.100509] [3:
Binder_3: 5178] [@][SEN:D:0] framerate: req@30fps,
cur@30fps
<7>[ 9821.103177] [3:
Binder_3: 5178] [@]sensor mode(652x488@112) = 4
<7>[ 9821.103230] [3:
Binder_3: 5178] [@][SEN:D:0] framerate: req@30fps,
cur@30fps
<7>[ 9821.103624] [3:
Binder_3: 5178] [@]sensor mode(2608x1960@30) = 0
<7>[ 9821.111584] [3:
Binder_3: 5178] [@][0][GP2]bufs: 06, init : 0, asyn
: 1, skip: 0, sync : 0
<7>[ 9821.111821] [3:
Binder_3: 5178] [@][0][GP0]bufs: 06, init : 1, asyn
: 1, skip: 1, sync : 2
<7>[ 9821.111864] [3:
Binder_3: 5178] [@][0] =GRP CFG===============
<7>[ 9821.111906] [3:
Binder_3: 5178] [@][0][GP0] SRC10:2608x1960
<7>[ 9821.111945] [3:
Binder_3: 5178] [@][0][GP0] CAP11:2608x1960
<7>[ 9821.111984] [3:
Binder_3: 5178] [@][0][GP0] CAP12:1920x1080
<7>[ 9821.112028] [3:
Binder_3: 5178] [@][0][GP2] SRC30:1920x1080
<7>[ 9821.112071] [3:
Binder_3: 5178] [@][0][GP4] SRC50:1920x1080
<7>[ 9821.112112] [3:
Binder_3: 5178] [@][0][GP4] CAP52:0480x0270
<7>[ 9821.112152] [3:
Binder_3: 5178] [@][0] =======================
<7>[ 9821.112193] [3:
Binder_3: 5178] [@][0] TPU FULL BYPASS
<7>[ 9821.146189] [1:
Binder_3: 5178] [@][0][ISC:D] fimc_is_ischain_start
(33):0
<7>[ 9821.146490] [1:
Binder_3: 5178] [@]input & output sizes are same(26
08, 1960)
<7>[ 9821.146537] [1:
Binder_3: 5178] [@][0][SEN:D] fimc_is_sensor_back_s
tart(2608x1960, 0)
<7>[ 9821.148675] [2:fimc_is_gworker:13842] [@][0][3XS][F7]in_crop[0, 246, 2592
, 1458]
<7>[ 9821.148730] [2:fimc_is_gworker:13842] [@][0][3XS][F7]ot_crop[0, 0, 1920,
1080]
<7>[ 9821.148802] [2:fimc_is_gworker:13842] [@][0][3XP][F7]ot_crop[0, 0, 1920,
1080] on
<7>[ 9821.149818] [1:
Binder_3: 5178] [@][0][CSI] settle(2608x1960@30) =
22
<7>[ 9821.149873] [1:
Binder_3: 5178] [@][0][CSI] vci(0x32314742) = 1
<7>[ 9821.149966] [1:
Binder_3: 5178] [@][0][ISC:D] stream on ready(1, 1)
<7>[ 9821.150025] [1:
Binder_3: 5178] [@][WRN]couldn't find static dvfs s
cenario [sensor:(1/0)/fps:30/setfile:33/scp size:(480/270)]
<7>[ 9821.150025] [1:
Binder_3: 5178]

<7>[ 9821.150095]
o(0)-[]
<7>[ 9821.242072]
<7>[ 9821.242138]
1080]
<7>[ 9821.242180]
70]
<7>[ 9821.341305]
<7>[ 9821.416157]
<4>[ 9821.434275]
<7>[ 9821.681809]
<7>[ 9821.681861]
<7>[ 9821.695114]
<7>[ 9821.715182]
stop(0)
<7>[ 9821.715375]
aiting...
<7>[ 9821.715435]
top(0)
<7>[ 9821.715793]
ued buffer is not
<7>[ 9821.715840]
ly trigger(pc 15)
<7>[ 9821.715901]
<7>[ 9821.716050]
<7>[ 9821.716108]
<7>[ 9821.716155]
<7>[ 9821.739899]
0 H0))
<7>[ 9821.739982]
<7>[ 9821.743049]
nt: 22
<7>[ 9821.743111]
(16):0
<7>[ 9821.743153]
t : 1)
<7>[ 9821.743191]
t : 0)
<7>[ 9821.744379]
ued buffer is not
<7>[ 9821.744967]
<7>[ 9821.745679]
(14):0
<7>[ 9821.772235]
<7>[ 9821.772267]
se(0)
<7>[ 9821.772294]
ose():0
<7>[ 9821.772562]
<7>[ 9821.772663]
top(0)
<7>[ 9821.772681]
<7>[ 9821.772699]
stop(0)
<7>[ 9821.772756]
<7>[ 9821.772775]
):0
<7>[ 9821.772810]
se(0):0
<7>[ 9821.773109]

[1:

Binder_3: 5178] [@][0][ISC:D] tbl[1] static scenari

[2:fimc_is_gworker:13841] [@][0][SCP][F7]CRange:W
[2:fimc_is_gworker:13841] [@][0][SCP][F7]in_crop[0, 0, 1920,
[2:fimc_is_gworker:13841] [@][0][SCP][F7]ot_crop[0, 0, 480, 2
[2:fimc_is_gworker:13841]
[1: monitorThread:13860]
I[0:
swapper/0:
0]
[1:
Binder_1: 4610]
[1:
Binder_1: 4610]
[1:
Binder_1: 4610]
[1:
Binder_1: 4610]

[@][0][VRA][F10]bypass : 0
[@]FIMC_IS_SYNC 73
DHCP - 0x108 [RX]
[@][RSC] cluster1 minfreq : 0Mhz
[@][RSC] cluster1 maxfreq : 0Mhz
[@][0][ISC:D] stream off ready
[@][0][FRT:D] fimc_is_sensor_front_

[1:

Binder_1: 4610] [@][0][WRN]fimc_is_flite_stop, no w

[1:

Binder_1: 4610] [@][0][BAK:D] fimc_is_sensor_back_s

[1:
empty(2)
[1:

Binder_1: 4610] [@][0][WRN]video10 stream off : que


Binder_1: 4610] [@][0][WRN] front is stopped, force

[1:
Binder_1: 4610]
[2:fimc_is_gworker:13842]
[2:fimc_is_gworker:13842]
[2:fimc_is_gworker:13842]
[0: kworker/0:2H:23569]

[@][0][GP0][WRN] 1 reqs waiting...


[@][0][GP0][WRN] cancel by fstop2
[@][0][3XP][F0][ERR] CANCEL(4)
[@][0][GP0][F22][ERR] CANCEL(4)
[@][0][GP0][F22][ERR] NDONE(3, EF(L

[0:
[1:

kworker/0:2H:23569] [@][0][3XP][F22][ERR] NDONE(3, E1)


Binder_1: 4610] [@][0][GP0] sensor fcount: 22, fcou

[1:

Binder_1: 4610] [@][0][GP0]fimc_is_ischain_3aa_stop

[1:

Binder_1: 4610] [@][WRN]com frame22 is flushed(coun

[1:

Binder_1: 4610] [@][WRN]com frame22 is flushed(coun

[2:
empty(2)
[2:
[2:

Binder_1: 4610] [@][0][WRN]video12 stream off : que


Binder_1: 4610] [@][0][WRN]already process stop
Binder_1: 4610] [@][0][GP2]fimc_is_ischain_isp_stop

[2:
[2:

Binder_2: 5177] [@][RSC] rsctype : 3, rsccount : 2


Binder_2: 5177] [@][0][COM:D] fimc_is_companion_clo

[2:

Binder_2: 5177] [@][0][COM:V] fimc_is_comp_video_cl

[2:
[2:

Binder_2: 5177] [@][0][WRN]already back stop


Binder_2: 5177] [@][0][BAK:D] fimc_is_sensor_back_s

[2:
[2:

Binder_2: 5177] [@][0][WRN]already front stop


Binder_2: 5177] [@][0][FRT:D] fimc_is_sensor_front_

[2:
[2:

Binder_2: 5177] [@][RSC] rsctype : 0, rsccount : 1


Binder_2: 5177] [@][0][SEN:D] fimc_is_sensor_close(

[2:

Binder_2: 5177] [@][0][SS0:V] fimc_is_ssx_video_clo

[2:

Binder_2: 5177] [@][0][30P:V] fimc_is_3xp_video_clo

se(6,0):0
<7>[ 9821.773224] [2:
Binder_2: 5177] [@][0][30C:V] fimc_is_3xc_video_clo
se(5,0):0
<7>[ 9821.773318] [2:
Binder_2: 5177] [@][0][WRN]already group stop
<7>[ 9821.773341] [2:
Binder_2: 5177] [@][0][WRN]already stop
<7>[ 9821.773366] [2:
Binder_2: 5177] [@][0][GP0]fimc_is_ischain_3aa_stop
(16):0
<7>[ 9821.773511] [2:
Binder_2: 5177] [@][0][30S:V] fimc_is_3aa_video_clo
se(4,0):0
<7>[ 9821.773793] [2:
Binder_2: 5177] [@][0][SCP:V] fimc_is_scp_video_clo
se(3,0):0
<7>[ 9821.773916] [2:
Binder_2: 5177] [@][0][WRN]already group stop
<7>[ 9821.773941] [2:
Binder_2: 5177] [@][0][GP2]fimc_is_ischain_isp_stop
(14):0
<7>[ 9821.774037] [2:
Binder_2: 5177] [@][0][I0S:V] fimc_is_ixs_video_clo
se(2,0):0
<7>[ 9821.774147] [2:
Binder_2: 5177] [@][0][I0P:V] fimc_is_ixp_video_clo
se(1,0):0
<7>[ 9821.774411] [2:
Binder_2: 5177] [@][0][WRN]already group stop
<7>[ 9821.774436] [2:
Binder_2: 5177] [@][0][GP4]fimc_is_ischain_dis_stop
(0):0
<7>[ 9821.793740] [2:
Binder_2: 5177] [@]A5 state(0x2000)
<7>[ 9821.793813] [2:
Binder_2: 5177] [@]FIMC_IS runtime suspend in
<7>[ 9821.801110] [2:
Binder_2: 5177] [@]FIMC_IS runtime suspend out
<7>[ 9821.801834] [2:
kworker/2:2:13049] [@]fimc_is_sensor_gpio_off : compan
ion gpio is on. we will gpio off on device-companion
<7>[ 9821.802162] [2:
kworker/2:2:13049] [@]fimc_is_sensor_mclk_off : compan
ion clk is on. sensor mclk will off with companion mclk
<7>[ 9821.802214] [2:
kworker/2:2:13049] [@][SEN:D:0] fimc_is_sensor_runtime
_suspend():0
<7>[ 9821.802891] [0:
Binder_2: 5177] [@]fimc_is_ischain_power(0):0
<7>[ 9821.803555] [2:
kworker/2:2:13049] [@]fimc_is_companion_runtime_suspen
d
<7>[ 9821.803610] [2:
kworker/2:2:13049] [@] pin_ctrl(act(4), pin(0), val(0)
, nm(pin)
<7>[ 9821.803650] [2:
kworker/2:2:13049] [@] pin_ctrl(act(4), pin(0), val(1)
, nm(pin)
<7>[ 9821.803689] [2:
kworker/2:2:13049] [@] pin_ctrl(act(4), pin(0), val(0)
, nm(pin)
<7>[ 9821.803729] [2:
kworker/2:2:13049] [@] pin_ctrl(act(1), pin(52), val(0
), nm(rst_low)
<7>[ 9821.803769] [2:
kworker/2:2:13049] [@] pin_ctrl(act(1), pin(54), val(0
), nm(standby_low)
<7>[ 9821.803809] [2:
kworker/2:2:13049] [@] pin_ctrl(act(1), pin(55), val(0
), nm(comp_rst low)
<7>[ 9821.803848] [2:
kworker/2:2:13049] [@] pin_ctrl(act(5), pin(0), val(0)
, nm(VDDD_CORE_0.8V_COMP)
<7>[ 9821.803888] [2:
kworker/2:2:13049] [@] pin_ctrl(act(5), pin(0), val(0)
, nm(VDDD_NORET_0.9V_COMP)
<7>[ 9821.803927] [2:
kworker/2:2:13049] [@] pin_ctrl(act(5), pin(0), val(0)
, nm(VDDD_CORE_1.0V_COMP)
<7>[ 9821.803967] [2:
kworker/2:2:13049] [@] pin_ctrl(act(5), pin(0), val(0)
, nm(VDDA_1.8V_COMP)
<7>[ 9821.804006] [2:
kworker/2:2:13049] [@] pin_ctrl(act(5), pin(0), val(1)
, nm(VDDD_RET_1.0V_COMP)
<7>[ 9821.804047] [2:
kworker/2:2:13049] [@] pin_ctrl(act(5), pin(0), val(0)
, nm(VDDD_1.2V_VT)
<7>[ 9821.804085] [2:
kworker/2:2:13049] [@] pin_ctrl(act(5), pin(0), val(0)
, nm(VDDA_2.9V_VT)
<7>[ 9821.804124] [2:
kworker/2:2:13049] [@] pin_ctrl(act(5), pin(0), val(0)

, nm(VDDIO_1.8V_VT)
<7>[ 9821.804163] [2:
kworker/2:2:13049] [@] pin_ctrl(act(5), pin(0), val(0)
, nm(VDDIO_1.8V_CAM)
<7>[ 9821.804202] [2:
kworker/2:2:13049] [@] pin_ctrl(act(5), pin(0), val(0)
, nm(OIS_VDD_2.8V)
<7>[ 9821.804241] [2:
kworker/2:2:13049] [@] pin_ctrl(act(5), pin(0), val(0)
, nm(OIS_VM_2.8V)
<6>[ 9821.809214] [2:
kworker/2:2:13049] exynos_fimc_is_module_pin_control :
regulator_set_voltage(700000)
<4>[ 9821.810542] [2:
kworker/2:2:13049] VDDD_RET_1.0V_COMP regulator is alr
eady enabled
<7>[ 9821.823252] [2:
kworker/2:2:13049] [@]fimc_is_companion_gpio_off: COMP
ANION STATE 2
<7>[ 9821.823929] [2:
kworker/2:2:13049] [@][COM:D] fimc_is_companion_runtim
e_suspend(0)
<7>[ 9821.825243] [0:
Binder_2: 5177] [@][RSC] rsctype : 2, rsccount : 0
<7>[ 9821.825494] [0:
Binder_2: 5177] [@][0][ISC:D] fimc_is_ischain_close
():0
<7>[ 9821.825575] [0:
Binder_2: 5177] [@][0][DIS:V] fimc_is_dis_video_clo
se(0,0):0
<6>[ 9822.030422] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa263e0
<6>[ 9822.030503] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9822.030761] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9822.030812] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9822.030858] [2:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work was
cancelled
<6>[ 9822.034259] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9822.035070] [1:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 88 17 51 00 0e 00 14 06 00
<6>[ 9822.038484] [1:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 42 19 4f 00 00 00
<6>[ 9822.042280] [1:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 42 19 4f 00 15 00 02 04 00
<6>[ 9822.251409] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9822.251622] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[ 9822.251654] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[ 9822.251683] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9822.251886] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[ 9823.252891] [2: kworker/u16:3: 8924] [mhi_initiate_m3] Entered MHI state
4, Pending M0 0 Pending M3 0
<6>[ 9823.252974] [2: kworker/u16:3: 8924] [mhi_initiate_m3] Triggering wake o
ut of M2
<6>[ 9823.263980] [0: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26430
<6>[ 9823.264057] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9823.264331] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9823.264391] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9823.264436] [1:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9823.268467] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Exited

<6>[ 9823.268624] [3: kworker/u16:3: 8924] [mhi_initiate_m3] Cancelled M1 time


r, timer was active
<6>[ 9823.268879] [3: kworker/u16:3: 8924] [mhi_initiate_m3] Waiting for M3 co
mpletion.
<6>[ 9823.281850] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9823.282097] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 5
<6>[ 9823.282148] [1:MHI_STATE_THREA: 4605] [process_M3_transition] Processing
M3 state transition
<6>[ 9823.282249] [3: kworker/u16:3: 8924] [mhi_initiate_m3] M3 completion rec
eived
<6>[ 9823.282315] [3: kworker/u16:3: 8924] [mhi_turn_off_pcie_link] Entered...
<6>[ 9823.296293] [3: kworker/u16:3: 8924] mhi 0000:01:00.0: [debug] pmcsr reg
: b dev->current_state : 0
<6>[ 9823.296469] [3: kworker/u16:3: 8924] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9823.296584] [3: kworker/u16:3: 8924] exynos-pcie 10ee0000.pcie0: ack mes
sage is ok
<6>[ 9823.296630] [3: kworker/u16:3: 8924] exynos-pcie 10ee0000.pcie0: receive
d Enter_L23_READY DLLP packet
<6>[ 9823.296685] [3: kworker/u16:3: 8924] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[ 9823.296860] [3: kworker/u16:3: 8924] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[ 9823.326863] [3: kworker/u16:3: 8924] [mhi_turn_off_pcie_link] Exited...
<6>[ 9823.523029] [0:
kworker/0:1:25228] [Time-to-FULL] 368634(secs), 6143(m
ins)
<6>[ 9823.523338] [0:
kworker/0:1:25228] [Time-to-EMPTY] 21380(secs), 356(mi
ns)
<6>[ 9823.570264] [0:
kworker/0:1:25228] [FG] 0080h,ffa5h,7f80h,ff01h,1900h,
0f89h,5bc2h,53b1h,194ch,ce66h,fd20h,f800h,0107h,558fh,5d5ch,0fdfh,105ch,0ed9h,33
80h,5c00h,05ffh,0148h,1950h,5c1ch,1439h,cef6h,2c0fh,da96h,41a5h,0314h,0320h,0ed9
h,ffffh,20b0h,2000h,127ch,1400h,2305h,1950h,807ch,2472h,cea4h,203bh,09d0h,e3e1h,
290eh,0400h,0000h,7cb5h,5329h,1603h,0241h,0000h,10eeh,ebc8h,05e0h,0050h,1a45h,7d
54h,f800h,1680h,1008h,4dach,e000h,0000h,a900h,1005h,0000h,d26fh,0a8bh,7210h,ffe7
h,5df9h,2271h,0fe3h,0000h,d90dh,d78dh,0a6ah,0000h,0000h,0000h,7f80h,0000h,0000h,
0005h,011ah,05e4h,0000h,006bh,090ch,0050h,1870h,0204h,094dh,0000h,039eh,100fh,0c
0eh,0c0dh,0c0ch,0c0bh,0c0ah,0c09h,0c08h,a516h,4350h,0010h,0071h,ffffh,5d94h,0f6e
h,1943h,1600h,e856h,2c0fh,ff00h,0000h,f35ah,ffffh,4c50h,fffch,4170h,0000h,4000h,
0000h,7d00h,0620h,0000h,0000h,0000h,0000h,22fbh,0000h,0000h,fce0h,403eh,56c1h,fe
f2h,d31bh,004bh,2910h,cedah,55a8h,
<7>[ 9823.572382] [0:
kworker/0:1:25228] max77843_fg_write_temp: temperature
to (256, 0x1999)
<6>[ 9823.577249] [0:
kworker/0:1:25228] max77843_fg_check_qrtable: QRTABLE2
0_REG(0x1603), QRTABLE30_REG(0x1005)
<6>[ 9823.583352] [0:
kworker/0:1:25228] max77843_fg_read_vcell: VCELL(4137)
, data(0xceda)
<7>[ 9823.583759] [0:
kworker/0:1:25228] max77843_get_fuelgauge_soc: soc(917
), low_batt_alarm(0)
<6>[ 9823.583817] [0:
kworker/0:1:25228] sec_bat_get_property cable type = 1
sleep_mode = 0
<7>[ 9823.584122] [0:
kworker/0:1:25228] max77843_chg_get_property : set-cur
rent(0mA), current now(433mA)
<6>[ 9823.584432] [0:
kworker/0:1:25228] max77843_fg_get_scaled_capacity : C
ABLE TYPE(1) INPUT CURRENT(433) CHARGINGE MODE(NONE)
<7>[ 9823.584475] [0:
kworker/0:1:25228] max77843_fg_get_scaled_capacity: ca
pacity_max (926)
<6>[ 9823.584803] [0:
kworker/0:1:25228] max77843_fg_get_scaled_capacity: sc
aled capacity (99.0)

<6>[ 9823.584847] [0:


kworker/0:1:25228] max77843_fg_get_atomic_capacity : N
OW(99), OLD(99)
<6>[ 9823.584920] [0:
kworker/0:1:25228] sec-battery battery.51: sec_bat_get
_battery_info:Vnow(4127mV),Inow(-115mA),Isysnow(-1mA),Imax(460mA),SOC(99%),Tbat(
256),Tchg(268),Twpc(0),is_hc_usb(0)
<6>[ 9823.584975] [0:
kworker/0:1:25228] sec-battery battery.51: Connected,V
avg(4139mV),Vocv(4222mV),Tamb(256),Iavg(-320mA),Isysavg(-1mA),Iadc(0)
<6>[ 9823.585975] [0:
kworker/0:1:25228] sdchg_ic_use_adc_check : SELF_DISCH
ARGING(0) SELF_DISCHARGING_ADC(0)
<6>[ 9823.586041] [0:
kworker/0:1:25228] sec-battery battery.51: sdchg_ic_us
e_discharging_check: Auto_DIS(0), Force_DIS(0)
<6>[ 9823.586366] [0:
kworker/0:1:25228] max77843_get_float_voltage: battery
cv voltage 0x1d, chg_float_voltage = 4350mV
<6>[ 9823.586414] [0:
kworker/0:1:25228] sec_bat_swelling_check: status(2),
swell_mode(0:1), cv(0x1d), temp(256)
<6>[ 9823.586452] [0:
kworker/0:1:25228] sec_bat_swelling_check: DISCHARGING
or NOT-CHARGING. stop swelling mode
<6>[ 9823.586516] [0:
kworker/0:1:25228] sec-battery battery.51: sec_bat_mon
itor_work: Status(Discharging), mode(None), Health(Good), Cable(1), level(70%),
HV(NONE), Cycle(599)
<6>[ 9823.586569] [0:
kworker/0:1:25228] power_supply battery: power_supply_
changed
<6>[ 9823.586792] [0:
kworker/0:1:25228] sec_bat_get_property cable type = 1
sleep_mode = 0
<6>[ 9823.586858] [0:
kworker/0:1:25228] sec_bat_get_property cable type = 1
<6>[ 9823.597675] [3:
healthd: 3346] sec_bat_get_property cable type = 1
sleep_mode = 0
<12>[ 9823.600224] [3:
healthd: 3346] healthd: battery l=99 v=4127 t=25.
6 h=2 st=3 c=0 o=1 ca=-320 ct=0 ps=0 chg= 2016-11-17 16:15:30.818638423 UTC
<12>[ 9823.600384] [3:
healthd: 3346] healthd: battery l=99 v=4127 t=25.
6 h=2 st=3 c=0 o=1 ca=-320 ct=0 ps=0 chg= 2016-11-17 16:15:30.818638423 UTC hv=0
sec=0 chg=
<14>[ 9823.600461] [3:
healthd: 3346] healthd-android: healthd_mode_andr
oid_battery_update
<14>[ 9823.600533] [3:
healthd: 3346] BatteryPropertiesRegistrar: notify
Listeners : start
<6>[ 9823.603259] [1:PhotonicModulat: 5207] dsim_panel_set_brightness : platfor
m : 15, : mapping : 15, real : 15, index : 13, interpolation : 0
<14>[ 9823.600777] [3:
healthd: 3346] IBatteryPropertiesListener : batte
ryPropertiesChanged!
<14>[ 9823.600777] [3:
healthd: 3346] : BatteryPropertiesRegistrar: noti
fyListeners : done
<6>[ 9823.609841] [0:PhotonicModulat: 5207] dsim_panel_get_elvssoffset 0
<6>[ 9823.609952] [0:PhotonicModulat: 5207] vint: 21
<6>[ 9823.610077] [0:PhotonicModulat: 5207] acl : 2, opr: 12
<6>[ 9823.610116] [0:PhotonicModulat: 5207] acl: 2(50), auto_brightness: 0
<6>[ 9823.610182] [0:PhotonicModulat: 5207] dsim_panel_set_tset temperature: 25
, tset: 25
<6>[ 9823.610244] [0:PhotonicModulat: 5207] hbm: 0, auto_brightness: 0
<6>[ 9824.258406] [1: irq/15-SSP_Int: 1775] [SSP] [M] AR-0,2,74,8187,180,20,0,0
<6>[ 9824.591295] I[0:
swapper/0:
0] exynos-pcie 10ee0000.pcie0: cp2ap_w
ake irq involked
<6>[ 9824.591457] [0:
kworker/0:1:25228] exynos-pcie 10ee0000.pcie0: PCIe: W
ake work for RC0
<6>[ 9824.591515] [0:
kworker/0:1:25228] exynos-pcie 10ee0000.pcie0: Callbac
k for the event : 4
<6>[ 9824.591557] [0:
kworker/0:1:25228] [mhi_link_state_cb] Received MSM_PC
IE_EVENT_WAKE
<6>[ 9824.591823] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni

ng to 10
<6>[ 9824.591876] [1:MHI_STATE_THREA: 4605] [process_WAKE_transition] Entered
<6>[ 9824.591922] [1:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[ 9824.591974] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, start of poweron, pcie state: 0
<6>[ 9824.632248] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: D state
: 0, 787a00
<6>[ 9824.647109] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_reset: Link up : 0x034d5c11
<6>[ 9824.647608] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, end of poweron, pcie state: 3
<6>[ 9824.659746] [1:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] pmcsr reg
: 8 dev->current_state : 3
<6>[ 9824.659913] [1:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9824.659966] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
y for the link of RC0
<6>[ 9824.660011] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
config space of RC0 and its EP
<6>[ 9824.660054] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
RC0
<6>[ 9824.660140] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
EP of RC0
<6>[ 9824.660604] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Refresh
ing the saved config space in PCI framework for RC0 and its EP
<6>[ 9824.665983] [1:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[ 9824.666042] [1:MHI_STATE_THREA: 4605] [process_WAKE_transition] MHI is in
itialized, transitioning to M0.
<6>[ 9824.666090] [1:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Entered MHI state
5, Pending M0 0 Pending M3 0
<6>[ 9824.666137] [1:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Waiting for M0 M1
or M3. Currently 5...
<6>[ 9824.666182] [1:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Wait complete sta
te: 5
<6>[ 9824.666225] [1:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[ 9824.666265] [1:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[ 9824.666307] [1:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Setting M0 ...
<6>[ 9824.666540] [1:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Exited...
<6>[ 9824.666581] [1:MHI_STATE_THREA: 4605] [process_WAKE_transition] Exited.
<6>[ 9824.669616] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 5 link 1, ring type 2, index 0 db 0x5fa26450
<6>[ 9824.669676] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9824.669900] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9824.669951] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9824.669997] [1:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9824.673715] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9824.673979] [2:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 89 17 51 00 0e 00 14 06 00
<6>[ 9824.676183] [2:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 43 19 4f 00 00 00
<6>[ 9824.686653] [2:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 43 19 4f 00 15 00 02 04 00
<6>[ 9824.896081] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9824.896368] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[ 9824.896423] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Processing

M1 state transition from state 3


<6>[ 9824.896481] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9824.896715] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[ 9825.872283] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa264a0
<6>[ 9825.872325] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9825.872378] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9825.872402] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9825.872424] [1:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work was
cancelled
<6>[ 9825.873184] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9825.879435] [0:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 8a 17 51 00 0e 00 14 06 00
<6>[ 9825.880820] [3:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 44 19 4f 00 00 00
<6>[ 9825.884274] [0:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 44 19 4f 00 15 00 02 04 00
<6>[ 9826.093223] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9826.093383] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[ 9826.093408] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[ 9826.093438] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9826.093641] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[ 9826.292313] [1:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 45 19 43 00 00 00
<6>[ 9826.303215] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa264f0
<6>[ 9826.303279] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9826.303472] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9826.303513] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9826.303551] [1:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work was
cancelled
<6>[ 9826.306608] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9826.312959] [2: kworker/u16:3: 8924] [SSP] debug_work_func: (61) - Senso
r state: 0x1fc3febf, RC: 1, CC: 0 DC: 0 TC: 0
<6>[ 9826.313014] [2: kworker/u16:3: 8924] [SSP] 0 : 51, 114, 8170 (200ms, 0ms
)
<6>[ 9826.313052] [2: kworker/u16:3: 8924] [SSP] 9 : 176, 110, 96, 362, 245, 3
(200ms)
<6>[ 9826.313090] [3: kworker/u16:6:32449] vfsspi_work_func_debug ldo: 3, slee
p: 0, irq: 0, tz: 1, type: viper
<6>[ 9826.313125] [2: kworker/u16:3: 8924] [SSP] 13 : 1(1ms)
<6>[ 9826.314920] [2:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 b3
00 80 03 01 02 45 19 43 00 a7 00 02 04 00
<6>[ 9826.322021] [1:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 8b 17 51 00 0e 00 14 06 00
<6>[ 9826.323968] [1:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 46 19 4f 00 00 00
<6>[ 9826.335481] [1:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 46 19 4f 00 15 00 02 04 00

<6>[ 9826.415589] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re


ceived ring 0x0
<6>[ 9826.415774] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[ 9826.415799] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[ 9826.415827] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9826.416100] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[ 9827.020994] [0:PhotonicModulat: 5207] dsim_panel_set_brightness : platfor
m : 0, : mapping : 2, real : 2, index : 0, interpolation : 0
<6>[ 9827.024900] [0:PhotonicModulat: 5207] dsim_panel_get_elvssoffset 0
<6>[ 9827.025019] [0:PhotonicModulat: 5207] vint: 18
<6>[ 9827.025177] [0:PhotonicModulat: 5207] acl : 2, opr: 12
<6>[ 9827.025216] [0:PhotonicModulat: 5207] acl: 2(50), auto_brightness: 0
<6>[ 9827.025286] [0:PhotonicModulat: 5207] dsim_panel_set_tset temperature: 25
, tset: 25
<6>[ 9827.025350] [0:PhotonicModulat: 5207] hbm: 0, auto_brightness: 0
<6>[ 9827.128646] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26560
<6>[ 9827.128721] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9827.128899] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9827.128926] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9827.128947] [2:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work was
cancelled
<6>[ 9827.129748] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9827.132886] [1:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 8c 17 51 00 0e 00 14 06 00
<6>[ 9827.134175] [3:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 47 19 4f 00 00 00
<6>[ 9827.141470] [2:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 47 19 4f 00 15 00 02 04 00
<6>[ 9827.217775] [3:
Binder_3:30892] [SSP] ssp_sensorhub_write(4): -78,
7, 0, 0
<6>[ 9827.217838] [3:
Binder_3:30892] [SSP] send_instruction: Inst = 0xb2
, Sensor Type = 0x7, data = 0
<6>[ 9827.254377] [6:PmsDisplayThrea:13908] sec_touchkey_driver 3-0020: touchke
y_power_on: off
<6>[ 9827.254397] [5:PmsDisplayThrea:13909] fts_touch 7-0049: fts_stop_device
<6>[ 9827.254418] [5:PmsDisplayThrea:13909] fts_touch 7-0049: FTS INT Disable
<6>[ 9827.254737] [5:PmsDisplayThrea:13909] fts_touch 7-0049: FTS Command (A1)
, ret = 1
<6>[ 9827.254860] [5:PmsDisplayThrea:13909] fts_touch 7-0049: FTS Command (90)
, ret = 1
<6>[ 9827.257407] [5:PmsDisplayThrea:13909] fts_touch 7-0049: fts_power_ctrl: o
ff
<6>[ 9827.259461] [1:PmsDisplayThrea: 4338] LCD off
<6>[ 9827.259497] [1:PmsDisplayThrea: 4338] is_lcd_on is FALSE
<6>[ 9827.269212] [2: surfaceflinger: 3350] decon_blank ++ blank_mode : 4
<6>[ 9827.269229] [2: surfaceflinger: 3350] decon-int POWERDOWN mode: 0type (0:
DSI, 1: HDMI, 2:WB)
<6>[ 9827.293865] [3: surfaceflinger: 3350] dsim_disable ++
<6>[ 9827.297660] [3: surfaceflinger: 3350] MDD : s6e3ha2_wqhd_exit was called
<6>[ 9827.308245] [3:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 17
00 00 e3 02 00 6e 00 00 00 0b 00 01 08 00
<6>[ 9827.309392] [1: irq/15-SSP_Int: 1775] [SSP] [M] save bak odr 0, 1, 20, 20
, 0

<6>[ 9827.309392] [1: irq/15-SSP_Int: 1775] save bak odr 0, 0, 20, 20, 0
<6>[ 9827.309392] [1: irq/15-SSP_Int: 1775] RM 0 5 1 4 60
<6>[ 9827.309392] [1: irq/15-SSP_Int: 1775] SMR 7 1 0
<6>[ 9827.309392] [1: irq/15-SSP_Int: 1775] RL7 0 0 8705 1441151885120634888
<6>[ 9827.317705] [2:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 13
00 80 e3 02 02 6e 00 00 00 07 00 02 04 00
<6>[ 9827.321720] [3:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 a3
00 00 03 01 00 48 19 50 00 97 00 10 11 00
<6>[ 9827.333159] [1:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 13
00 80 03 01 02 48 19 50 00 07 00 02 04 00
<6>[ 9827.334354] [3:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 10
00 00 03 01 00 49 19 02 00 04 00 12 01 00
<6>[ 9827.346444] [2:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 13
00 80 03 01 02 49 19 02 00 07 00 02 04 00
<6>[ 9827.347603] [1:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 44
00 00 03 01 00 4a 19 03 00 38 00 10 01 00
<6>[ 9827.361157] [2:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 13
00 80 03 01 02 4a 19 03 00 07 00 02 04 00
<6>[ 9827.362275] [2:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 17
00 00 03 01 00 4b 19 70 00 0b 00 01 08 00
<6>[ 9827.375661] [2:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 13
00 80 03 01 02 4b 19 70 00 07 00 02 04 00
<6>[ 9827.441508] [0: surfaceflinger: 3350] dsim_disable -<4>[ 9827.441564] [0: surfaceflinger: 3350] decon 13930000.decon_fb: pm_relax
<6>[ 9827.441623] [0: surfaceflinger: 3350] decon_blank -- blank_mode : 4
<6>[ 9827.441775] [0: surfaceflinger: 3350] dsim_panel_set_brightness : panel i
s not active state..
<6>[ 9827.441809] [0: surfaceflinger: 3350] mdnie mdnie: fb_notifier_callback:
4
<6>[ 9827.441853] [0: surfaceflinger: 3350] LCD is off
<6>[ 9827.441972] [3: kworker/u16:6:32449] mailbox: apm -> hsi2c mode
<6>[ 9827.570322] [1:
mc_log: 3354] MobiCore mcd: b01|[Driver Template]
drMain(): driver startedSEC_SPI_DRIVER_1.0_2015.11.27.
<6>[ 9827.584465] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9827.584541] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[ 9827.584563] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[ 9827.584594] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9827.584794] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[ 9827.656225] [2:
Binder_2:30887] [SSP] ssp_sensorhub_write(4): -76,
13, -46, 0
<6>[ 9827.663043] [2:
Binder_2:30887] [SSP] ssp_send_cmd: command 0xd2 0
<6>[ 9827.665124] [3:sensorhubservic: 3377] [SSP] ssp_sensorhub_write(5): -63,
14, 16, 15, 34
<6>[ 9827.665159] [3:sensorhubservic: 3377] [SSP] send_instruction: Inst = 0xc1
, Sensor Type = 0xe, data = 16
<6>[ 9827.671960] [1: irq/15-SSP_Int: 1775] [SSP] [M] PD: Ref E(0),I(1)
<6>[ 9827.671960] [1: irq/15-SSP_Int: 1775] PD: TimeNoti 16 15 35
<6>[ 9827.731895] [2:
mc_log: 3354] MobiCore mcd: d01|Trustlet FingerPr
int::Starting
<6>[ 9827.737213] [2:
mc_log: 3354] MobiCore mcd: d01|FINGERPRINT comma
ndId :11
<6>[ 9827.737239] [2:
mc_log: 3354] MobiCore mcd: d01|Trustlet Fingerpr
int::Returning 0
<6>[ 9827.749415] [1:
mc_log: 3354] MobiCore mcd: d01|FINGERPRINT comma
ndId :12

<6>[ 9827.750695] [2:


mc_log: 3354] MobiCore mcd: d01|Trustlet Fingerpr
int::Returning 0
<6>[ 9827.751325] [0: fingerprintd: 3410] vfsspi_ioctl VFSSPI_IOCTL_SET_LOCKS
CREEN :ON
<6>[ 9827.756221] [2:
mc_log: 3354] MobiCore mcd: d01|FINGERPRINT comma
ndId :c
<6>[ 9827.756248] [2:
mc_log: 3354] MobiCore mcd: d01|do_extra_control
opcode : 48
<6>[ 9827.756645] [1:
mc_log: 3354] MobiCore mcd: d01|Trustlet Fingerpr
int::Returning 0
<6>[ 9827.759565] [0:
mc_log: 3354] MobiCore mcd: d01|FINGERPRINT comma
ndId :c
<6>[ 9827.759593] [0:
mc_log: 3354] MobiCore mcd: d01|do_extra_control
opcode : 37
<6>[ 9827.847659] [1: irq/15-SSP_Int: 1775] [SSP] [M] AT-SetTS1 58535322 585340
00
<6>[ 9827.847659] [1: irq/15-SSP_Int: 1775] PD: TimeNoti 16 15 35
<6>[ 9827.929428] [0: thread_hotplug:13461] frequency info : 1500000, prev_cmd
4, exe_cmd 0
<6>[ 9827.929451] [0: thread_hotplug:13461] lcd is on : 0, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9827.929462] [0: thread_hotplug:13461] cluster1 cores hotplug out : 0
<6>[ 9827.929475] [2:
mc_log: 3354] MobiCore mcd: e01|ccccccccccccccccc
cccccccccTL_TZ_CCM: tciBufferLen = 38912 = 0x9800
<6>[ 9827.929490] [2:
mc_log: 3354] MobiCore mcd: e01|Trustlet TL_TZ_CC
M: Starting
<6>[ 9827.929502] [2:
mc_log: 3354] MobiCore mcd: e01|TL_TZ_CCM: tciBuf
ferLen = 38912 = 0x9800
<6>[ 9827.929514] [2:
mc_log: 3354] MobiCore mcd: e01|TL_TZ_CCM: sendms
g envelope length = 19456 = 0x4c00
<6>[ 9827.929527] [2:
mc_log: 3354] MobiCore mcd: e01|TL_TZ_CCM: sendms
g = 00092c80, respmsg = 0009785c
<6>[ 9827.929540] [2:
mc_log: 3354] MobiCore mcd: e01|Trustlet TL_TZ_CC
M: Got a message!
<6>[ 9827.929551] [2:
mc_log: 3354] MobiCore mcd: e01|TZ_CCM: we got a
command
<6>[ 9827.929564] [2:
mc_log: 3354] MobiCore mcd: e01|TZ_CCM: process_c
md: CMD_TZ_CCM_C_Initialize:
<6>[ 9827.932836] [2:
mc_log: 3354] MobiCore mcd: e01|TIMA trustlet: Re
ading knox license status
<6>[ 9827.932855] [2:
mc_log: 3354] MobiCore mcd: e01|TIMA trustlet: g
et_sec_TIMA_address tima_sec_mem_addr : FE800000
<6>[ 9827.932868] [2:
mc_log: 3354] MobiCore mcd: 501|drTima: processin
g TIMA_DRIVER_PHYS_MEM_ACCESS_COPY
<6>[ 9827.932880] [2:
mc_log: 3354] MobiCore mcd: 501|drTima: data_len
= 4 = 0x4
<6>[ 9827.932891] [2:
mc_log: 3354] MobiCore mcd: 501|drTima: PHYS_READ
<6>[ 9827.932903] [2:
mc_log: 3354] MobiCore mcd: e01|read license stat
us is: 0
<6>[ 9827.932914] [2:
mc_log: 3354] MobiCore mcd: e01|low security mode
<6>[ 9827.936138] [2:
mc_log: 3354] MobiCore mcd: 501|drTima: processin
g TIMA_DRIVER_PHYS_MEM_ACCESS_COPY
<6>[ 9827.936156] [2:
mc_log: 3354] MobiCore mcd: 501|drTima: data_len
= 32 = 0x20
<6>[ 9827.936168] [2:
mc_log: 3354] MobiCore mcd: 501|drTima: PHYS_READ
<6>[ 9827.936180] [2:
mc_log: 3354] MobiCore mcd: e01|TIMA trustlet: wa
rranty violation detected 18
<6>[ 9827.936193] [2:
mc_log: 3354] MobiCore mcd: e01|TZ_COMMON: Initia
lize failed - tamper fuse set
<6>[ 9827.936206] [2:
mc_log: 3354] MobiCore mcd: e01|TL_TZ_CCM: TL CCM

general initialization failure


<6>[ 9827.936219] [2:
mc_log: 3354] MobiCore mcd: e01|Trustlet TL_TZ_CC
M: sendmsg->header.id = 0x00000002
<6>[ 9827.937173] [2:
mc_log: 3354] MobiCore mcd: e01|Trustlet TL_TZ_CC
M: respmsg->header.id = 0x80000002
<6>[ 9827.937188] [2:
mc_log: 3354] MobiCore mcd: e01|Trustlet TL_TZ_CC
M: respmsg->header.status = 0x00000000
<6>[ 9827.937201] [2:
mc_log: 3354] MobiCore mcd: e01|Trustlet TL_TZ_CC
M: Returning = 0x00000000
<6>[ 9827.942736] [2:
mc_log: 3354] MobiCore mcd: 104| SMGNT send MSG_C
LOSE_TRUSTLET for thread e01 to IPCH
<6>[ 9827.942761] [2:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 202 (UUID=02010000-0000-0000-0000-000000005000) (server 0/8 status i
s 00000002)
<6>[ 9827.946015] [2:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 302 (UUID=ffffffff-0000-0000-0000-000000000002) (server 1/8 status i
s 00000001)
<6>[ 9827.946039] [2:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 402 (UUID=ffffffff-0000-0000-0000-000000000001) (server 2/8 status i
s 00000001)
<6>[ 9827.949442] [2:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 501 (UUID=ffffffff-d000-0000-0000-00000000000a) (server 3/8 status i
s 00000001)
<6>[ 9827.949463] [2:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 602 (UUID=ffffffff-d000-0000-0000-000000000016) (server 4/8 status i
s 00000001)
<6>[ 9827.952784] [2:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 702 (UUID=07050500-0000-0000-0000-000000000000) (server 5/8 status i
s 00000001)
<6>[ 9827.952804] [2:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to b02 (UUID=ffffffff-d000-0000-0000-00000000000e) (server 6/8 status i
s 00000001)
<6>[ 9827.956011] [2:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 902 (UUID=ffffffff-d000-0000-0000-000000000014) (server 7/8 status i
s 00000001)
<6>[ 9827.956026] [2:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop do
ne
<6>[ 9827.956039] [2:
mc_log: 3354] MobiCore mcd: 501|drTima: MSG_CLOSE
_TRUSTLET call 0x40001
<6>[ 9827.956052] [2:
mc_log: 3354] MobiCore mcd: b02|Driver SPI receiv
es MSG_CLOSE_TRUSTLET[0x00040001, 0x0001000e]
<6>[ 9827.957573] [2:
mc_log: 3354] MobiCore mcd: 104| SMGNT smgntClose
Session done
<6>[ 9827.965862] [1:
mc_log: 3354] MobiCore mcd: d01|Trustlet Fingerpr
int::Returning 0
<3>[ 9827.968760] [2:
tlc_server: 5103] MobiCore mcd: closed by PID(5103),
name(tlc_server)
<6>[ 9827.969433] [2:
mc_log: 3354] MobiCore mcd: d01|FINGERPRINT comma
ndId :c
<6>[ 9827.969456] [2:
mc_log: 3354] MobiCore mcd: d01|do_extra_control
opcode : 47
<6>[ 9827.976545] [2:
mc_log: 3354] MobiCore mcd: d01|Trustlet Fingerpr
int::Returning 0
<6>[ 9828.012195] [3: wpa_supplicant: 5196] [dhd] dhd_suspend_resume_helper
<6>[ 9828.012232] [3: wpa_supplicant: 5196] [dhd] dhd_set_suspend
<4>[ 9828.012250] [3: wpa_supplicant: 5196] dhd_set_suspend: force extra Suspen
d setting
<4>[ 9828.012276] [3: wpa_supplicant: 5196] dhd_prot_ioctl: SET PM to 1
<6>[ 9828.012503] [0: mSvcLEDThread: 4330] leds-max77843-rgb: store_max77843_r
gb_pattern

<6>[ 9828.012535] [0: mSvcLEDThread: 4330]


_state
<6>[ 9828.012552] [0: mSvcLEDThread: 4330]
ber, 1
<6>[ 9828.012637] [0: mSvcLEDThread: 4330]
ber, 1
<4>[ 9828.013186] [3: wpa_supplicant: 5196]
lue = 1
<6>[ 9828.013552] [0: mSvcLEDThread: 4330]
_state, led_num = 1, brightness = 0
<6>[ 9828.013971] [0: mSvcLEDThread: 4330]
_state
<6>[ 9828.013992] [0: mSvcLEDThread: 4330]
ber, 2
<6>[ 9828.014009] [0: mSvcLEDThread: 4330]
ber, 2
<6>[ 9828.014452] [0: mSvcLEDThread: 4330]
_state, led_num = 2, brightness = 0
<6>[ 9828.014832] [0: mSvcLEDThread: 4330]
_state
<6>[ 9828.014850] [0: mSvcLEDThread: 4330]
ber, 3
<6>[ 9828.014867] [0: mSvcLEDThread: 4330]
ber, 3
<6>[ 9828.015239] [0: mSvcLEDThread: 4330]
_state, led_num = 3, brightness = 0
<6>[ 9828.015602] [0: mSvcLEDThread: 4330]
p
<6>[ 9828.015997] [1: mSvcLEDThread: 4330]
nk
<6>[ 9828.016350] [0: mSvcLEDThread: 4330]
_state
<6>[ 9828.016372] [0: mSvcLEDThread: 4330]
ber, 3
<6>[ 9828.016390] [0: mSvcLEDThread: 4330]
ber, 3
<6>[ 9828.016751] [1: wpa_supplicant: 5196]
<6>[ 9828.017085] [0: mSvcLEDThread: 4330]
_state, led_num = 3, brightness = 50
<6>[ 9828.029375] [0: thread_hotplug:13461]
, exe_cmd 1
<6>[ 9828.029410] [0: thread_hotplug:13461]
dm_hotplug disable = 0
<6>[ 9828.029427] [0: thread_hotplug:13461]
<4>[ 9828.031903] [7:
migration/7: 43]
<5>[ 9828.033050] [0: thread_hotplug:13461]
<4>[ 9828.036654] [6:
migration/6: 38]
<5>[ 9828.037172] [0: thread_hotplug:13461]
<4>[ 9828.040440] [5:
migration/5: 33]
<5>[ 9828.040931] [0: thread_hotplug:13461]
<4>[ 9828.043457] [4:
migration/4: 28]
<5>[ 9828.043961] [0: thread_hotplug:13461]
<4>[ 9828.047182] [3:
migration/3: 23]
<4>[ 9828.047319] [3:
migration/3: 23]
<5>[ 9828.048710] [0: thread_hotplug:13461]
<4>[ 9828.051586] [2:
migration/2: 18]
<4>[ 9828.051717] [2:
migration/2: 18]
<5>[ 9828.053176] [0: thread_hotplug:13461]
<6>[ 9828.058823] [0: thread_hotplug:13461]
0, active_cpu=0x00000001

leds-max77843-rgb: max77843_rgb_set
leds-max77843-rgb: max77843_rgb_num
leds-max77843-rgb: max77843_rgb_num
dhd_enable_packet_filter: enter, va
leds-max77843-rgb: max77843_rgb_set
leds-max77843-rgb: max77843_rgb_set
leds-max77843-rgb: max77843_rgb_num
leds-max77843-rgb: max77843_rgb_num
leds-max77843-rgb: max77843_rgb_set
leds-max77843-rgb: max77843_rgb_set
leds-max77843-rgb: max77843_rgb_num
leds-max77843-rgb: max77843_rgb_num
leds-max77843-rgb: max77843_rgb_set
leds-max77843-rgb: max77843_rgb_ram
leds-max77843-rgb: max77843_rgb_bli
leds-max77843-rgb: max77843_rgb_set
leds-max77843-rgb: max77843_rgb_num
leds-max77843-rgb: max77843_rgb_num
[dhd] suspend bcn_li_dtim: 0
leds-max77843-rgb: max77843_rgb_set
frequency info : 900000, prev_cmd 0
lcd is on : 0, low power mode = 0,
cluster1 cores hotplug out : 0
IRQ155 no longer affine to CPU7
CPU7: shutdown
IRQ154 no longer affine to CPU6
CPU6: shutdown
IRQ153 no longer affine to CPU5
CPU5: shutdown
IRQ152 no longer affine to CPU4
CPU4: shutdown
IRQ151 no longer affine to CPU3
IRQ250 no longer affine to CPU3
CPU3: shutdown
IRQ150 no longer affine to CPU2
IRQ250 no longer affine to CPU2
CPU2: shutdown
MobiCore mcd: <- core_num=0x0000000

<6>[ 9828.058938] [1:


mc_fastcall: 1747]
<4>[ 9828.059720] [1:
migration/1: 13]
<4>[ 9828.059849] [1:
migration/1: 13]
<5>[ 9828.061277] [0: thread_hotplug:13461]
<6>[ 9828.144169] [0:
Binder_1: 3442]
26, 0, 0, 0, 0, 0, 0, 0, 0
<6>[ 9828.144205] [0:
Binder_1: 3442]
, Sensor Type = 0x1a, data = 0
<6>[ 9828.213766] [0: irq/15-SSP_Int: 1775]
0
<6>[ 9828.213766] [0: irq/15-SSP_Int: 1775]
<6>[ 9828.213766] [0: irq/15-SSP_Int: 1775]
<6>[ 9828.213766] [0: irq/15-SSP_Int: 1775]
<6>[ 9828.213766] [0: irq/15-SSP_Int: 1775]
<6>[ 9828.213766] [0: irq/15-SSP_Int: 1775]
<6>[ 9828.213766] [0: irq/15-SSP_Int: 1775]
<6>[ 9828.213766] [0: irq/15-SSP_Int: 1775]
<6>[ 9828.213766] [0: irq/15-SSP_Int: 1775]
<6>[ 9828.213766] [0: irq/15-SSP_Int: 1775]
<6>[ 9828.262759] [0: thread_hotplug:13461]
1, exe_cmd 4
<6>[ 9828.262790] [0: thread_hotplug:13461]
dm_hotplug disable = 0
<6>[ 9828.262805] [0: thread_hotplug:13461]
<4>[ 9828.263163] [1:
swapper/1:
0]
<6>[ 9828.274686] [0: thread_hotplug:13461]
1, active_cpu=0x00000000
<6>[ 9828.274801] [0:
mc_fastcall: 1747]
<4>[ 9828.275316] [2:
swapper/2:
0]
<4>[ 9828.277158] [3:
swapper/3:
0]
<4>[ 9828.465327] [0: wpa_supplicant: 5196]
0
<4>[ 9828.465386] [0: wpa_supplicant: 5196]
lue = 0
<6>[ 9828.476091] [0: thread_hotplug:13461]
, exe_cmd 1
<6>[ 9828.476123] [0: thread_hotplug:13461]
dm_hotplug disable = 0
<6>[ 9828.476140] [0: thread_hotplug:13461]
<5>[ 9828.480463] [0: thread_hotplug:13461]
<4>[ 9828.480576] [2: wpa_supplicant: 5196]
ove = 0, num = 2
<5>[ 9828.488219] [0: thread_hotplug:13461]
<4>[ 9828.490190] [0: wpa_supplicant: 5196]
1
<4>[ 9828.490232] [0: wpa_supplicant: 5196]
lue = 1
<6>[ 9828.498371] [0: thread_hotplug:13461]
0, active_cpu=0x00000001
<6>[ 9828.498894] [1:
mc_fastcall: 1747]
<5>[ 9828.502821] [0: thread_hotplug:13461]
<6>[ 9828.548098] [0:
Binder_E: 5897]
e = 8704, old_enable = 8705
<6>[ 9828.548132] [0:
Binder_E: 5897]
sor = 1, current state = 8704
<6>[ 9828.548153] [0:
Binder_E: 5897]
, Sensor Type = 0x0, data = 200
<6>[ 9828.559780] [0:
Binder_6: 5480]
e = 8192, old_enable = 8704
<6>[ 9828.559813] [0:
Binder_6: 5480]

MobiCore mcd: CoreSwap ok 1 -> 0


IRQ149 no longer affine to CPU1
IRQ250 no longer affine to CPU1
CPU1: shutdown
[SSP] ssp_sensorhub_write(10): -78,
[SSP] send_instruction: Inst = 0xb2
[SSP] [M] AR-0,14,92,8183,180,20,0,
OJH EL 0x0 0x0 0x0
AT-ALLREMOVED
save bak odr 0, 1, 20, 20, 0
save bak odr 0, 0, 20, 20, 0
RM 0 4 1 3 60
SMR 3 1 0
RL3 0 0 8705 1441151885120634880
AT-RL 0 0 0 0,AT 0 0 0000 0000
RL26 0 0 8705 1441151885053526016
frequency info : 1000000, prev_cmd
lcd is on : 0, low power mode = 1,
cluster1 cores hotplug out : 0
CPU1: Booted secondary processor
MobiCore mcd: <- core_num=0x0000000
MobiCore mcd: CoreSwap ok 0 -> 1
CPU2: Booted secondary processor
CPU3: Booted secondary processor
net_os_enable_packet_filter: val =
dhd_enable_packet_filter: enter, va
frequency info : 900000, prev_cmd 4
lcd is on : 0, low power mode = 0,
cluster1 cores hotplug out : 0
CPU3: shutdown
net_os_rxfilter_add_remove: add_rem
CPU2: shutdown
net_os_enable_packet_filter: val =
dhd_enable_packet_filter: enter, va
MobiCore mcd: <- core_num=0x0000000
MobiCore mcd: CoreSwap ok 1 -> 0
CPU1: shutdown
[SSP] set_sensors_enable: new_enabl
[SSP] ssp_remove_sensor: remove sen
[SSP] send_instruction: Inst = 0xa2
[SSP] set_sensors_enable: new_enabl
[SSP] ssp_remove_sensor: remove sen

sor = 512, current state = 8192


<6>[ 9828.559834] [0:
Binder_6: 5480] [SSP] send_instruction: Inst = 0xa2
, Sensor Type = 0x9, data = 200
<6>[ 9828.565310] [0: irq/15-SSP_Int: 1775] [SSP] [M] save bak odr 0, 1, 20, 20
, 0
<6>[ 9828.565310] [0: irq/15-SSP_Int: 1775] save bak odr 0, 0, -1, 20, 0
<6>[ 9828.565310] [0: irq/15-SSP_Int: 1775] RM 0 3 0 0 180
<6>[ 9828.586021] [0: kworker/u16:6:32449] [mhi_initiate_m3] Entered MHI state
4, Pending M0 0 Pending M3 0
<6>[ 9828.586065] [0: kworker/u16:6:32449] [mhi_initiate_m3] Triggering wake o
ut of M2
<6>[ 9828.596601] [0: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26650
<6>[ 9828.596708] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9828.597024] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9828.597155] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9828.597240] [0:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9828.598607] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9828.598637] [0: kworker/u16:6:32449] [mhi_initiate_m3] Cancelled M1 time
r, timer was active
<6>[ 9828.598778] [0: kworker/u16:6:32449] [mhi_initiate_m3] Waiting for M3 co
mpletion.
<6>[ 9828.606112] [0: thread_hotplug:13461] frequency info : 1104000, prev_cmd
1, exe_cmd 4
<6>[ 9828.606140] [0: thread_hotplug:13461] lcd is on : 0, low power mode = 1,
dm_hotplug disable = 0
<6>[ 9828.606155] [0: thread_hotplug:13461] cluster1 cores hotplug out : 0
<4>[ 9828.606516] [1:
swapper/1:
0] CPU1: Booted secondary processor
<6>[ 9828.607362] [1: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9828.607511] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 5
<6>[ 9828.607531] [1:MHI_STATE_THREA: 4605] [process_M3_transition] Processing
M3 state transition
<6>[ 9828.607587] [1: kworker/u16:6:32449] [mhi_initiate_m3] M3 completion rec
eived
<6>[ 9828.607614] [1: kworker/u16:6:32449] [mhi_turn_off_pcie_link] Entered...
<6>[ 9828.608206] [0: thread_hotplug:13461] MobiCore mcd: <- core_num=0x0000000
1, active_cpu=0x00000000
<6>[ 9828.608313] [0:
mc_fastcall: 1747] MobiCore mcd: CoreSwap ok 0 -> 1
<4>[ 9828.608690] [2:
swapper/2:
0] CPU2: Booted secondary processor
<4>[ 9828.610755] [3:
swapper/3:
0] CPU3: Booted secondary processor
<6>[ 9828.619548] [0: kworker/u16:6:32449] mhi 0000:01:00.0: [debug] pmcsr reg
: b dev->current_state : 0
<6>[ 9828.619697] [0: kworker/u16:6:32449] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9828.619775] [0: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: ack mes
sage is ok
<6>[ 9828.619793] [0: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: receive
d Enter_L23_READY DLLP packet
<6>[ 9828.619817] [0: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[ 9828.619921] [0: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[ 9828.649936] [0: kworker/u16:6:32449] [mhi_turn_off_pcie_link] Exited...
<6>[ 9828.668667] [1:SSRM Handler Th: 9082] sec-battery battery.51: sec_bat_sto
re_attrs: siop level: 100

<6>[ 9828.668705] [1:SSRM Handler Th: 9082] bq51221_chg_set_property siop = 100


<6>[ 9828.668973] [0:
kworker/0:1:25228] sec_bat_siop_work : set current by
siop level(100)
<6>[ 9828.669009] [0:
kworker/0:1:25228] max77843_set_current: siop_level=10
0, afc_detec=0, current_max=460, current_now=0
<6>[ 9828.669024] [0:
kworker/0:1:25228] max77843_set_current: siop_level=10
0, afc_detec=0, current_max=460, current_now=0
<6>[ 9828.669296] [0:
kworker/0:1:25228] max77843_check_aicl_state aicl stat
e
<6>[ 9828.669708] [0:
kworker/0:1:25228] [max77843_set_charge_current] REG(0
xb9) DATA(0x80), CURRENT(0)
<7>[ 9828.671058] [0:
kworker/0:1:25228] max77843_set_buck : CHG_CNFG_00(0x1
4)
<6>[ 9828.671380] [0:
kworker/0:1:25228] [max77843_set_input_current] REG(0x
c0) DATA(0x17)
<7>[ 9828.671647] [0:
kworker/0:1:25228] MAX77843 addr : 0xb1 data : 0x1a
<7>[ 9828.671915] [0:
kworker/0:1:25228] MAX77843 addr : 0xb2 data : 0x9d
<7>[ 9828.672324] [0:
kworker/0:1:25228] MAX77843 addr : 0xb3 data : 0x00
<7>[ 9828.672721] [0:
kworker/0:1:25228] MAX77843 addr : 0xb4 data : 0x38
<7>[ 9828.673042] [0:
kworker/0:1:25228] MAX77843 addr : 0xb5 data : 0x00
<7>[ 9828.673328] [0:
kworker/0:1:25228] MAX77843 addr : 0xb6 data : 0xff
<7>[ 9828.673603] [0:
kworker/0:1:25228] MAX77843 addr : 0xb7 data : 0x14
<7>[ 9828.673838] [0:
kworker/0:1:25228] MAX77843 addr : 0xb8 data : 0x30
<7>[ 9828.674060] [0:
kworker/0:1:25228] MAX77843 addr : 0xb9 data : 0x80
<7>[ 9828.674310] [0:
kworker/0:1:25228] MAX77843 addr : 0xba data : 0x38
<7>[ 9828.674495] [0:
kworker/0:1:25228] MAX77843 addr : 0xbb data : 0x9d
<7>[ 9828.674848] [0:
kworker/0:1:25228] MAX77843 addr : 0xbc data : 0x96
<7>[ 9828.675117] [0:
kworker/0:1:25228] MAX77843 addr : 0xbd data : 0x0c
<7>[ 9828.675405] [0:
kworker/0:1:25228] MAX77843 addr : 0xbe data : 0x30
<7>[ 9828.675679] [0:
kworker/0:1:25228] MAX77843 addr : 0xbf data : 0xff
<7>[ 9828.676054] [0:
kworker/0:1:25228] MAX77843 addr : 0xc0 data : 0x0d
<7>[ 9828.676267] [0:
kworker/0:1:25228] MAX77843 addr : 0xc1 data : 0x17
<7>[ 9828.676613] [0:
kworker/0:1:25228] MAX77843 addr : 0xc2 data : 0x00
<7>[ 9828.676921] [0:
kworker/0:1:25228] MAX77843 addr : 0xc3 data : 0x67
<3>[ 9828.687672] [1:
hci_thread: 6674] [BT] set_wake_locked value = 1
<6>[ 9828.689513] [2:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 4c 19 43 00 00 00
<6>[ 9828.689586] [2:
qmuxd: 3399] [mhi_wake_dev_from_m3] Initiating M
0 work...
<6>[ 9828.689695] [2: kworker/u16:6:32449] [m0_work] No pending resume, initia
ting M0.
<6>[ 9828.689719] [2: kworker/u16:6:32449] [mhi_initiate_m0] Entered MHI state
5, Pending M0 0 Pending M3 0
<6>[ 9828.689736] [2: kworker/u16:6:32449] [mhi_initiate_m0] Waiting for M0 M1
or M3. Currently 5...
<6>[ 9828.689753] [2: kworker/u16:6:32449] [mhi_initiate_m0] Wait complete sta
te: 5
<6>[ 9828.689770] [2: kworker/u16:6:32449] [mhi_turn_on_pcie_link] Entered...
<6>[ 9828.689793] [2: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, start of poweron, pcie state: 0
<6>[ 9828.729790] [0: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: D state
: 0, 9f4700
<6>[ 9828.749547] [1: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: exynos_
pcie_reset: Link up : 0x03bc7011
<6>[ 9828.749927] [1: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, end of poweron, pcie state: 3
<6>[ 9828.762902] [2: kworker/u16:6:32449] mhi 0000:01:00.0: [debug] pmcsr reg
: 8 dev->current_state : 3
<6>[ 9828.763078] [2: kworker/u16:6:32449] mhi 0000:01:00.0: [debug] device_ve

ndor_id reg : 30017cb


<6>[ 9828.763098] [2: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: Recover
y for the link of RC0
<6>[ 9828.763114] [2: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: Recover
config space of RC0 and its EP
<6>[ 9828.763129] [2: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: Recover
RC0
<6>[ 9828.763172] [2: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: Recover
EP of RC0
<6>[ 9828.763536] [2: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: Refresh
ing the saved config space in PCI framework for RC0 and its EP
<6>[ 9828.769026] [2: kworker/u16:6:32449] [mhi_turn_on_pcie_link] Exited...
<6>[ 9828.769064] [2: kworker/u16:6:32449] [mhi_initiate_m0] Setting M0 ...
<6>[ 9828.769165] [2: kworker/u16:6:32449] [mhi_initiate_m0] Exited...
<6>[ 9828.772859] [1: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 5 link 1, ring type 2, index 0 db 0x5fa26670
<6>[ 9828.772892] [1: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9828.772939] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9828.772957] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9828.772975] [1:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9828.773495] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9828.784843] [2:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 9f
00 80 03 01 02 4c 19 43 00 93 00 02 04 00
<6>[ 9828.916024] [0: thread_hotplug:13461] frequency info : 1500000, prev_cmd
4, exe_cmd 0
<6>[ 9828.916045] [0: thread_hotplug:13461] lcd is on : 0, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9828.916055] [0: thread_hotplug:13461] cluster1 cores hotplug out : 0
<4>[ 9828.916521] [4:
swapper/4:
0] CPU4: Booted secondary processor
<4>[ 9828.917929] [5:
swapper/5:
0] CPU5: Booted secondary processor
<4>[ 9828.922197] [6:
swapper/6:
0] CPU6: Booted secondary processor
<4>[ 9828.923345] [7:
swapper/7:
0] CPU7: Booted secondary processor
<6>[ 9828.993806] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9828.993972] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[ 9828.994000] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[ 9828.994028] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9828.994231] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[ 9829.022674] [0: thread_hotplug:13461] frequency info : 400000, prev_cmd 0
, exe_cmd 4
<6>[ 9829.022729] [0: thread_hotplug:13461] lcd is on : 0, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9829.022766] [0: thread_hotplug:13461] cluster1 cores hotplug out : 0
<6>[ 9829.222924] [0: thread_hotplug:13461] frequency info : 400000, prev_cmd 4
, exe_cmd 1
<6>[ 9829.222985] [0: thread_hotplug:13461] lcd is on : 0, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9829.223022] [0: thread_hotplug:13461] cluster1 cores hotplug out : 0
<5>[ 9829.228351] [0: thread_hotplug:13461] CPU7: shutdown
<5>[ 9829.233106] [0: thread_hotplug:13461] CPU6: shutdown
<5>[ 9829.237421] [0: thread_hotplug:13461] CPU5: shutdown
<5>[ 9829.240880] [0: thread_hotplug:13461] CPU4: shutdown
<5>[ 9829.248332] [0: thread_hotplug:13461] CPU3: shutdown

<6>[ 9829.253800] I[0:


swapper/0:
0]
ake is deasserted. release wakelock in 1s
<5>[ 9829.354878] [0: thread_hotplug:13461]
<6>[ 9829.357419] [0: thread_hotplug:13461]
0, active_cpu=0x00000001
<6>[ 9829.357573] [1:
mc_fastcall: 1747]
<5>[ 9829.361438] [0: thread_hotplug:13461]
<6>[ 9829.464391] [0: thread_hotplug:13461]
1, exe_cmd 4
<6>[ 9829.464424] [0: thread_hotplug:13461]
dm_hotplug disable = 0
<6>[ 9829.464439] [0: thread_hotplug:13461]
<4>[ 9829.464893] [1:
swapper/1:
0]
<6>[ 9829.465867] [0: thread_hotplug:13461]
1, active_cpu=0x00000000
<6>[ 9829.466087] [0:
mc_fastcall: 1747]
<4>[ 9829.467517] [2:
swapper/2:
0]
<4>[ 9829.469682] [3:
swapper/3:
0]
<6>[ 9829.569461] [0: thread_hotplug:13461]
, exe_cmd 1
<6>[ 9829.569493] [0: thread_hotplug:13461]
dm_hotplug disable = 0
<6>[ 9829.569510] [0: thread_hotplug:13461]
<5>[ 9829.572996] [0: thread_hotplug:13461]
<5>[ 9829.577068] [0: thread_hotplug:13461]
<6>[ 9829.586295] [0: thread_hotplug:13461]
0, active_cpu=0x00000001
<6>[ 9829.586426] [1:
mc_fastcall: 1747]
<5>[ 9829.588849] [0: thread_hotplug:13461]
<6>[ 9829.689417] [0: thread_hotplug:13461]
1, exe_cmd 4
<6>[ 9829.689446] [0: thread_hotplug:13461]
dm_hotplug disable = 0
<6>[ 9829.689461] [0: thread_hotplug:13461]
<4>[ 9829.689864] [1:
swapper/1:
0]
<6>[ 9829.690676] [0: thread_hotplug:13461]
1, active_cpu=0x00000000
<6>[ 9829.690791] [0:
mc_fastcall: 1747]
<4>[ 9829.691225] [2:
swapper/2:
0]
<4>[ 9829.692493] [3:
swapper/3:
0]
<6>[ 9829.792765] [0: thread_hotplug:13461]
, exe_cmd 1
<6>[ 9829.792797] [0: thread_hotplug:13461]
dm_hotplug disable = 0
<6>[ 9829.792814] [0: thread_hotplug:13461]
<5>[ 9829.796192] [0: thread_hotplug:13461]
<5>[ 9829.799845] [0: thread_hotplug:13461]
<6>[ 9829.806134] [0: thread_hotplug:13461]
0, active_cpu=0x00000001
<6>[ 9829.806246] [1:
mc_fastcall: 1747]
<5>[ 9829.808382] [0: thread_hotplug:13461]
<6>[ 9829.909415] [0: thread_hotplug:13461]
1, exe_cmd 4
<6>[ 9829.909446] [0: thread_hotplug:13461]
dm_hotplug disable = 0
<6>[ 9829.909460] [0: thread_hotplug:13461]
<4>[ 9829.909883] [1:
swapper/1:
0]
<6>[ 9829.910705] [0: thread_hotplug:13461]
1, active_cpu=0x00000000
<6>[ 9829.910820] [0:
mc_fastcall: 1747]

[BT] update_host_wake_locked host_w


CPU2: shutdown
MobiCore mcd: <- core_num=0x0000000
MobiCore mcd: CoreSwap ok 1 -> 0
CPU1: shutdown
frequency info : 1000000, prev_cmd
lcd is on : 0, low power mode = 1,
cluster1 cores hotplug out : 0
CPU1: Booted secondary processor
MobiCore mcd: <- core_num=0x0000000
MobiCore mcd: CoreSwap ok 0 -> 1
CPU2: Booted secondary processor
CPU3: Booted secondary processor
frequency info : 900000, prev_cmd 4
lcd is on : 0, low power mode = 0,
cluster1 cores hotplug out : 0
CPU3: shutdown
CPU2: shutdown
MobiCore mcd: <- core_num=0x0000000
MobiCore mcd: CoreSwap ok 1 -> 0
CPU1: shutdown
frequency info : 1104000, prev_cmd
lcd is on : 0, low power mode = 1,
cluster1 cores hotplug out : 0
CPU1: Booted secondary processor
MobiCore mcd: <- core_num=0x0000000
MobiCore mcd: CoreSwap ok 0 -> 1
CPU2: Booted secondary processor
CPU3: Booted secondary processor
frequency info : 900000, prev_cmd 4
lcd is on : 0, low power mode = 0,
cluster1 cores hotplug out : 0
CPU3: shutdown
CPU2: shutdown
MobiCore mcd: <- core_num=0x0000000
MobiCore mcd: CoreSwap ok 1 -> 0
CPU1: shutdown
frequency info : 1104000, prev_cmd
lcd is on : 0, low power mode = 1,
cluster1 cores hotplug out : 0
CPU1: Booted secondary processor
MobiCore mcd: <- core_num=0x0000000
MobiCore mcd: CoreSwap ok 0 -> 1

<4>[ 9829.911258] [2:


swapper/2:
0] CPU2: Booted secondary processor
<4>[ 9829.912523] [3:
swapper/3:
0] CPU3: Booted secondary processor
<3>[ 9829.953087] I[0:
swapper/0:
0] [BT] set_wake_locked value = 0
<6>[ 9829.996133] [0: kworker/u16:6:32449] [mhi_initiate_m3] Entered MHI state
4, Pending M0 0 Pending M3 0
<6>[ 9829.996240] [0: kworker/u16:6:32449] [mhi_initiate_m3] Triggering wake o
ut of M2
<6>[ 9830.006848] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa266b0
<6>[ 9830.006907] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9830.007159] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9830.007212] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9830.007257] [2:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9830.010773] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9830.010902] [0: kworker/u16:6:32449] [mhi_initiate_m3] Cancelled M1 time
r, timer was active
<6>[ 9830.011145] [0: kworker/u16:6:32449] [mhi_initiate_m3] Waiting for M3 co
mpletion.
<6>[ 9830.012666] [0: thread_hotplug:13461] frequency info : 400000, prev_cmd 4
, exe_cmd 1
<6>[ 9830.012709] [0: thread_hotplug:13461] lcd is on : 0, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9830.012746] [0: thread_hotplug:13461] cluster1 cores hotplug out : 0
<5>[ 9830.018349] [0: thread_hotplug:13461] CPU3: shutdown
<6>[ 9830.025109] [1: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<5>[ 9830.025148] [0: thread_hotplug:13461] CPU2: shutdown
<6>[ 9830.025278] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 5
<6>[ 9830.025325] [1:MHI_STATE_THREA: 4605] [process_M3_transition] Processing
M3 state transition
<6>[ 9830.025423] [1: kworker/u16:6:32449] [mhi_initiate_m3] M3 completion rec
eived
<6>[ 9830.025487] [1: kworker/u16:6:32449] [mhi_turn_off_pcie_link] Entered...
<6>[ 9830.028191] [0: thread_hotplug:13461] MobiCore mcd: <- core_num=0x0000000
0, active_cpu=0x00000001
<6>[ 9830.028470] [1:
mc_fastcall: 1747] MobiCore mcd: CoreSwap ok 1 -> 0
<5>[ 9830.032756] [0: thread_hotplug:13461] CPU1: shutdown
<6>[ 9830.039686] [0: kworker/u16:6:32449] mhi 0000:01:00.0: [debug] pmcsr reg
: b dev->current_state : 0
<6>[ 9830.039868] [0: kworker/u16:6:32449] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9830.039986] [0: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: ack mes
sage is ok
<6>[ 9830.040031] [0: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: receive
d Enter_L23_READY DLLP packet
<6>[ 9830.040085] [0: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[ 9830.040266] [0: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[ 9830.070457] [0: kworker/u16:6:32449] [mhi_turn_off_pcie_link] Exited...
<6>[ 9830.432805] [0: thread_hotplug:13461] frequency info : 1104000, prev_cmd
1, exe_cmd 4
<6>[ 9830.432834] [0: thread_hotplug:13461] lcd is on : 0, low power mode = 1,
dm_hotplug disable = 0
<6>[ 9830.432848] [0: thread_hotplug:13461] cluster1 cores hotplug out : 0
<4>[ 9830.433271] [1:
swapper/1:
0] CPU1: Booted secondary processor

<6>[ 9830.434110] [0: thread_hotplug:13461]


1, active_cpu=0x00000000
<6>[ 9830.434218] [0:
mc_fastcall: 1747]
<4>[ 9830.434671] [2:
swapper/2:
0]
<4>[ 9830.435936] [3:
swapper/3:
0]
<6>[ 9830.453073] [0: system_server: 4318]
37.673013070 UTC
<6>[ 9830.453098] [1: system_server: 4318]
<7>[ 9830.466505] [1: system_server: 4318]
<6>[ 9830.466794] [3: system_server: 4318]
ynamic_hotplug CMD_SLEEP_PREPARE
<6>[ 9830.466825] [3: system_server: 4318]
leep_prepare_cpus : 5
<4>[ 9830.467458] [4:
swapper/4:
0]
<6>[ 9830.473910] [0: thread_hotplug:13461]
<6>[ 9830.521785] [0: system_server: 4318]
> (set_volt: 675000, get_volt: 675000)
<6>[ 9830.522632] [0: system_server: 4318]
=> (set_volt: 687500, get_volt: 687500)
<6>[ 9830.524505] [0: system_server: 4318]
> 687500
<6>[ 9830.524537] [0: system_server: 4318]
<6>[ 9830.524554] [0: system_server: 4318]
<6>[ 9830.524588] [0: system_server: 4318]
uest
<3>[ 9830.525638] [2:
mdm_helper: 3355]
<4>[ 9830.525235] [0: system_server: 4318]
<6>[ 9830.527689] [0: system_server: 4318]
l
<4>[ 9830.527719] [0: system_server: 4318]
<3>[ 9830.527737] [0: system_server: 4318]
02 seconds
<4>[ 9830.527753] [0: system_server: 4318]
<3>[ 9830.531373] [2:
mdm_helper: 3355]
<6>[ 9830.533370] [3:onic.tuiservice: 659]
<6>[ 9830.533401] [3:onic.tuiservice:
<6>[ 9830.539155] [0: system_server:
equest
<6>[ 9830.539191] [0: system_server:
<6>[ 9830.539337] [2: system_server:
7.759280871 UTC
<6>[ 9830.555976] [3: kworker/u16:0:
<7>[ 9830.556027] [3: kworker/u16:0:
time_resume
<6>[ 9830.556046] [3: kworker/u16:0:
<7>[ 9830.556073] [3: kworker/u16:0:
amsung_usb2phy_runtime_resume
<6>[ 9830.556123] [3: kworker/u16:0:
hild=0
<7>[ 9830.556151] [3: kworker/u16:0:
<7>[ 9830.556173] [3: kworker/u16:0:
hub
<7>[ 9830.556197] [3: kworker/u16:0:
<7>[ 9830.579371] [0: kworker/u16:0:
<7>[ 9830.579439] [0: kworker/u16:0:
ange 0000
<7>[ 9830.579498] [3:
khubd:
00 evt 0000
<7>[ 9830.579510] [0: kworker/u16:0:

MobiCore mcd: <- core_num=0x0000000


MobiCore mcd: CoreSwap ok 0 -> 1
CPU2: Booted secondary processor
CPU3: Booted secondary processor
PM: suspend entry 2016-11-17 16:15:
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
exynos_dm_hotplug_notifier, 958 : d
nr_sleep_prepare_cpus : 4, tmp_nr_s
CPU4: Booted secondary processor
stopped thread_hotplug
MIF(635000): set TMU_COLD: 637500 =
DISP(100000): set TMU_COLD: 650000
INT(100000): set TMU_COLD: 650000 =
tmu temperature state 0 to 1
gpu temperature state 0 to 1
mdm_hsic_pm_notify_event: block req
esoc REQ engine released from wait
Freezing user space processes ...
last active wakeup source: eventpol
Freezing of tasks aborted after 0.0
Restarting tasks ... done.
esoc REQ enginer waiting on request
t-base-tui module: ioctl 0x80047402

659] TUI_IO_WAITCMD
4318] mdm_hsic_pm_notify_event: unblock r
4318] request_active_lock_set
4318] PM: suspend exit 2016-11-17 16:15:3
4939] mdm_hsic_rpm_check
4939] s5p-ehci 15510000.usb: s5p_ehci_run
4939] request_active_lock_set
4939] samsung-usb2phy 15530000.usb2phy: s
4939] s5p_ehci_runtime_resume: usage=1, c
4939] usb usb1: usb auto-resume
4939] s5p-ehci 15510000.usb: resume root
4939] s5p-ehci 15510000.usb: LRESET 0
4939] hub 1-0:1.0: hub_resume
4939] hub 1-0:1.0: port 2: status 0503 ch
742] hub 1-0:1.0: state 7 ports 2 chg 00
4939] usb 1-2: finish resume

<6>[ 9830.582495] [2: kworker/u16:0: 4939]


<6>[ 9830.582996] [2: kworker/u16:0: 4939]
<6>[ 9830.632679] [0: thread_hotplug:14014]
, exe_cmd 4
<6>[ 9830.632711] [0: thread_hotplug:14014]
dm_hotplug disable = 0
<6>[ 9830.632728] [0: thread_hotplug:14014]
<6>[ 9830.937793] [1:
kworker/1:3:17119]
=> (set_volt: 637500, get_volt: 637500)
<6>[ 9830.938770] [1:
kworker/1:3:17119]
volt: 650000, get_volt: 650000)
<6>[ 9830.940185] [1:
kworker/1:3:17119]
=> 650000
<6>[ 9830.940231] [1:
kworker/1:3:17119]
emp : 33
<7>[ 9831.091475] [0:
kworker/0:1:25228]
<7>[ 9831.102801] [0:
kworker/0:1:25228]
<7>[ 9831.102864] [0:
kworker/0:1:25228]
1
<7>[ 9831.102912] [0:
kworker/0:1:25228]
hub
<3>[ 9831.103793] [0:
kworker/0:1:25228]
time_suspend
<7>[ 9831.116184] [0:
kworker/0:1:25228]
amsung_usb2phy_runtime_suspend
<6>[ 9831.116262] [0:
kworker/0:1:25228]
<6>[ 9831.116327] [0:
kworker/0:1:25228]
child=0
<6>[ 9831.116689] [3: system_server: 4318]
38.336626012 UTC
<6>[ 9831.116732] [3: system_server: 4318]
<7>[ 9831.139324] [3: system_server: 4318]
<6>[ 9831.139487] [0: system_server: 4318]
ynamic_hotplug CMD_SLEEP_PREPARE
<6>[ 9831.139534] [0: system_server: 4318]
leep_prepare_cpus : 5
<6>[ 9831.139603] [0: thread_hotplug:14014]
<6>[ 9831.148101] [0: system_server: 4318]
> (set_volt: 675000, get_volt: 675000)
<6>[ 9831.148985] [0: system_server: 4318]
=> (set_volt: 687500, get_volt: 687500)
<6>[ 9831.150050] [0: system_server: 4318]
> 687500
<6>[ 9831.150094] [0: system_server: 4318]
<6>[ 9831.150144] [0: system_server: 4318]
uest
<3>[ 9831.151344] [2:
mdm_helper: 3355]
<4>[ 9831.150841] [0: system_server: 4318]
elapsed 0.006 seconds) done.
<4>[ 9831.157774] [0: system_server: 4318]
... (elapsed 0.007 seconds) done.
<7>[ 9831.164881] [0: system_server: 4318]
<4>[ 9831.164920] [0: system_server: 4318]
le_suspend to debug)
<6>[ 9831.166643] [0: system_server: 4318]
os_runtime_resume
<6>[ 9831.168737] [3: kworker/u16:32:32556]
<6>[ 9831.168782] [3: kworker/u16:32:32556]
MHI state 5
<4>[ 9831.168807] [0: system_server: 4318]

[CHKRA:5]>
mdm_hsic_rpm_restart
frequency info : 900000, prev_cmd 1
lcd is on : 0, low power mode = 0,
cluster1 cores hotplug out : 0
MIF(635000): unset TMU_COLD: 675000
DISP(100000): unset TMU_COLD: (set_
INT(100000): unset TMU_COLD: 687500
tmu temperature state 1 to 0, cur_t
usb 1-2: usb auto-suspend, wakeup 1
hub 1-0:1.0: hub_suspend
usb usb1: bus auto-suspend, wakeup
s5p-ehci 15510000.usb: suspend root
s5p-ehci 15510000.usb: s5p_ehci_run
samsung-usb2phy 15530000.usb2phy: s
request_active_lock_release
s5p_ehci_runtime_suspend: usage=0,
PM: suspend entry 2016-11-17 16:15:
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
exynos_dm_hotplug_notifier, 958 : d
nr_sleep_prepare_cpus : 4, tmp_nr_s
stopped thread_hotplug
MIF(635000): set TMU_COLD: 637500 =
DISP(100000): set TMU_COLD: 650000
INT(100000): set TMU_COLD: 650000 =
tmu temperature state 0 to 1
mdm_hsic_pm_notify_event: block req
esoc REQ engine released from wait
Freezing user space processes ... (
Freezing remaining freezable tasks
PM: Entering mem sleep
Suspending console(s) (use no_conso
exynos-dwc3 15400000.usb: dwc3_exyn
[mhi_suspend] [mhi_suspend]
[mhi_suspend] Entered, sys state 2,
dhdpcie_send_mb_data: H2D_MB_DATA:

0x00000001
<6>[ 9831.168834] [3: kworker/u16:32:32556]
5, Pending M0 0 Pending M3 0
<6>[ 9831.168868] [3: kworker/u16:32:32556]
state 0.
<4>[ 9831.169053] [0: system_server: 4318]
_D3_INFORM to dongle
<4>[ 9831.170363] I[0:
swapper/0:
0]
<4>[ 9831.170397] I[0:
swapper/0:
0]
Received D3 ACK
<4>[ 9831.170853] [0: system_server: 4318]
0x00000008
<4>[ 9831.171217] [0: system_server: 4318]
_D0_INFORM_IN_USE to dongle
<4>[ 9831.171426] [0: system_server: 4318]
<6>[ 9831.171846] [0: system_server: 4318]
43e914e4
<6>[ 9831.172241] [0: system_server: 4318]
100146
<6>[ 9831.172685] [0: system_server: 4318]
2800003
<6>[ 9831.173081] [0: system_server: 4318]
10
<6>[ 9831.173475] [0: system_server: 4318]
1c200004
<6>[ 9831.173869] [0: system_server: 4318]
0
<6>[ 9831.174263] [0: system_server: 4318]
1c400004
<6>[ 9831.174657] [0: system_server: 4318]
0
<6>[ 9831.175050] [0: system_server: 4318]
0
<6>[ 9831.175444] [0: system_server: 4318]
0
<6>[ 9831.175838] [0: system_server: 4318]
0
<6>[ 9831.176271] [0: system_server: 4318]
77414e4
<6>[ 9831.176667] [0: system_server: 4318]
0
<6>[ 9831.177062] [0: system_server: 4318]
48
<6>[ 9831.177456] [0: system_server: 4318]
0
<6>[ 9831.177850] [0: system_server: 4318]
1ed
<6>[ 9831.178249] [0: system_server: 4318]
2c10
<6>[ 9831.178643] [0: system_server: 4318]
142
<6>[ 9831.178670] [0: system_server: 4318]
0
<6>[ 9831.178696] [0: system_server: 4318]
0
<6>[ 9831.179090] [0: system_server: 4318]
: 400
<6>[ 9831.179547] [0: system_server: 4318]
: 1
<6>[ 9831.179576] [0: system_server: 4318]

[mhi_initiate_m3] Entered MHI state


[mhi_initiate_m3] MHI state 5, link
dhdpcie_send_mb_data: send H2D_HOST
D2H_MB_DATA: 0x00000001
dhdpcie_handle_mb_data D2H_MB_DATA:
dhdpcie_send_mb_data: H2D_MB_DATA:
dhdpcie_send_mb_data: send H2D_HOST
dhdpcie_suspend_dev: Enter
pcieh 0001:01:00.0: reg offset: 0:
pcieh 0001:01:00.0: reg offset: 4:
pcieh 0001:01:00.0: reg offset: 8:
pcieh 0001:01:00.0: reg offset: 12:
pcieh 0001:01:00.0: reg offset: 16:
pcieh 0001:01:00.0: reg offset: 20:
pcieh 0001:01:00.0: reg offset: 24:
pcieh 0001:01:00.0: reg offset: 28:
pcieh 0001:01:00.0: reg offset: 32:
pcieh 0001:01:00.0: reg offset: 36:
pcieh 0001:01:00.0: reg offset: 40:
pcieh 0001:01:00.0: reg offset: 44:
pcieh 0001:01:00.0: reg offset: 48:
pcieh 0001:01:00.0: reg offset: 52:
pcieh 0001:01:00.0: reg offset: 56:
pcieh 0001:01:00.0: reg offset: 60:
pcieh 0001:01:00.0: PCI_EXP_DEVCTL:
pcieh 0001:01:00.0: PCI_EXP_LNKCTL:
pcieh 0001:01:00.0: PCI_EXP_SLTCTL:
pcieh 0001:01:00.0: PCI_EXP_RTCTL:
pcieh 0001:01:00.0: PCI_EXP_DEVCTL2
pcieh 0001:01:00.0: PCI_EXP_LNKCTL2
pcieh 0001:01:00.0: PCI_EXP_SLTCTL2

: 0
<6>[ 9831.184475] [0: system_server:
device_vendor_id reg : 43e914e4
<6>[ 9831.184873] [0: system_server:
PMCSR reg value: 4108
<6>[ 9831.185268] [0: system_server:
PMCSR reg value: 410b
<6>[ 9831.185434] [0: system_server:
device_vendor_id reg : 43e914e4
<6>[ 9831.196334] [0: system_server:
eg : 410b dev->current_state : 0
<6>[ 9831.196500] [0: system_server:
vendor_id reg : 43e914e4
<6>[ 9831.196554] [0: system_server:
0: a575144d
<6>[ 9831.196588] [0: system_server:
4: 100147
<6>[ 9831.196622] [0: system_server:
8: 6040001
<6>[ 9831.196785] [0: system_server:
12: 10010
<6>[ 9831.196818] [0: system_server:
16: 0
<6>[ 9831.196852] [0: system_server:
20: 0
<6>[ 9831.196885] [0: system_server:
24: 10100
<6>[ 9831.196918] [0: system_server:
28: 0
<6>[ 9831.196952] [0: system_server:
32: 1ff01c00
<6>[ 9831.196985] [0: system_server:
36: 0
<6>[ 9831.197018] [0: system_server:
40: 0
<6>[ 9831.197052] [0: system_server:
44: 0
<6>[ 9831.197086] [0: system_server:
48: 0
<6>[ 9831.197120] [0: system_server:
52: 40
<6>[ 9831.197153] [0: system_server:
56: 0
<6>[ 9831.197317] [0: system_server:
60: 101ed
<6>[ 9831.197352] [0: system_server:
TL: 2010
<6>[ 9831.197385] [0: system_server:
TL: 42
<6>[ 9831.197412] [0: system_server:
TL: 0
<6>[ 9831.197446] [0: system_server:
L: 0
<6>[ 9831.197479] [0: system_server:
TL2: 400
<6>[ 9831.197511] [0: system_server:
TL2: 1
<6>[ 9831.197538] [0: system_server:
TL2: 0
<6>[ 9831.197894] [0: system_server:

4318] pcieh 0001:01:00.0: [debug] step 1,


4318] pcieh 0001:01:00.0: [debug] step 2,
4318] pcieh 0001:01:00.0: [debug] step 3,
4318] pcieh 0001:01:00.0: [debug] step 4,
4318] pcieh 0001:01:00.0: [debug] pmcsr r
4318] pcieh 0001:01:00.0: [debug] device_
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
4318] pcieport 0001:00:00.0: PCI_EXP_RTCT
4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
4318] exynos-pcie 15660000.pcie1: ack mes

sage is ok
<6>[ 9831.197923] [0: system_server: 4318] exynos-pcie 15660000.pcie1: receive
d Enter_L23_READY DLLP packet
<6>[ 9831.197960] [0: system_server: 4318] exynos-pcie 15660000.pcie1: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[ 9831.198102] [0: system_server: 4318] exynos-pcie 15660000.pcie1: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[ 9831.200686] [0: system_server: 4318] voltage(793750) + volt_offset(37500
) is bigger than max_volt(793750)
<6>[ 9831.200747] [0: system_server: 4318] voltage(793750) + volt_offset(37500
) is bigger than max_volt(793750)
<6>[ 9831.201925] [0: system_server: 4318] DEVFREQ(MIF): suspend voltage(79375
0 793750)
<6>[ 9831.204736] [0: system_server: 4318] s2m_rtc_update: RTC_UPDATE_REGISTER
check : 0x00
<6>[ 9831.204937] [0: system_server: 4318] s2m-rtc s2m-rtc: s2m_rtc_read_time:
2016-11-17 16:15:38(0x10)PM
<5>[ 9831.205353] [0: system_server: 4318] sd 0:0:0:0: [sda] Synchronizing SCS
I cache
<3>[ 9831.209671] [0: system_server: 4318] dpm_run_callback(): platform_pm_sus
pend+0x0/0x4c returns -16
<3>[ 9831.209704] [0: system_server: 4318] PM: Device alarmtimer failed to sus
pend: error -16
<3>[ 9831.209729] [0: system_server: 4318] PM: Some devices failed to suspend
<7>[ 9831.209986] [1: kworker/u16:22:32545] usb usb1: usb resume
<7>[ 9831.210025] [1: kworker/u16:22:32545] s5p-ehci 15510000.usb: s5p_ehci_run
time_resume
<6>[ 9831.210049] [1: kworker/u16:22:32545] request_active_lock_set
<7>[ 9831.210085] [1: kworker/u16:22:32545] samsung-usb2phy 15530000.usb2phy: s
amsung_usb2phy_runtime_resume
<6>[ 9831.210136] [1: kworker/u16:22:32545] s5p_ehci_runtime_resume: usage=1, c
hild=0
<7>[ 9831.210167] [1: kworker/u16:22:32545] s5p-ehci 15510000.usb: resume root
hub
<7>[ 9831.210197] [1: kworker/u16:22:32545] s5p-ehci 15510000.usb: LRESET 0
<6>[ 9831.212181] [0: system_server: 4318] s2m_rtc_update: RTC_UPDATE_REGISTER
check : 0x00
<6>[ 9831.212375] [0: system_server: 4318] s2m-rtc s2m-rtc: s2m_rtc_read_time:
2016-11-17 16:15:38(0x10)PM
<6>[ 9831.216148] [0: system_server: 4318] pcieh 0001:01:00.0: [debug] setp 5,
PMCSR reg value: ffff
<6>[ 9831.216190] [0: system_server: 4318] pcieh 0001:01:00.0: [debug] step 1,
device_vendor_id reg : ffffffff
<6>[ 9831.216219] [0: system_server: 4318] pcieh 0001:01:00.0: [debug] step 2,
PMCSR reg value: ffff
<6>[ 9831.216251] [0: system_server: 4318] pcieh 0001:01:00.0: [debug] step 3,
PMCSR reg value: 0
<6>[ 9831.216280] [0: system_server: 4318] pcieh 0001:01:00.0: [debug] step 4,
device_vendor_id reg : ffffffff
<6>[ 9831.222650] [2: kworker/u16:26:32550] mhi 0000:01:00.0: [debug] pmcsr reg
: ffff dev->current_state : 3
<6>[ 9831.222683] [2: kworker/u16:26:32550] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : ffffffff
<6>[ 9831.222716] [2: kworker/u16:26:32550] mhi 0000:01:00.0: Refused to change
power state, currently in D3, PCI_PM_CTRL=ffff
<6>[ 9831.222778] [2: kworker/u16:26:32550] [mhi_resume] [mhi_resume]
<6>[ 9831.222815] [2: kworker/u16:26:32550] [mhi_initiate_m0] Entered MHI state
5, Pending M0 0 Pending M3 0
<6>[ 9831.222849] [2: kworker/u16:26:32550] [mhi_initiate_m0] Waiting for M0 M1
or M3. Currently 5...

<6>[ 9831.222879] [2: kworker/u16:26:32550] [mhi_initiate_m0] Wait complete sta


te: 5
<6>[ 9831.222907] [2: kworker/u16:26:32550] [mhi_turn_on_pcie_link] Entered...
<6>[ 9831.222946] [2: kworker/u16:26:32550] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, start of poweron, pcie state: 0
<6>[ 9831.229300] [0: system_server: 4318] pcieh 0001:01:00.0: [debug] pmcsr r
eg : ffff dev->current_state : 3
<6>[ 9831.229331] [0: system_server: 4318] pcieh 0001:01:00.0: [debug] device_
vendor_id reg : ffffffff
<6>[ 9831.229362] [0: system_server: 4318] pcieh 0001:01:00.0: Refused to chan
ge power state, currently in D3, PCI_PM_CTRL=ffff
<6>[ 9831.229395] [0: system_server: 4318] exynos-pcie 15660000.pcie1: PCIE li
nk state is 0
<6>[ 9831.229426] [0: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_DEVCTL:
2c10
<6>[ 9831.229455] [0: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_LNKCTL:
142
<6>[ 9831.229483] [0: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_SLTCTL:
0
<6>[ 9831.229510] [0: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_RTCTL:
0
<6>[ 9831.229538] [0: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_DEVCTL2
: 400
<6>[ 9831.229566] [0: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_LNKCTL2
: 1
<6>[ 9831.229592] [0: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_SLTCTL2
: 0
<6>[ 9831.229625] [0: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x3c (was 0xffffffff, writing 0x1ed)
<6>[ 9831.229658] [0: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x38 (was 0xffffffff, writing 0x0)
<6>[ 9831.229690] [0: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x34 (was 0xffffffff, writing 0x48)
<6>[ 9831.229722] [0: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x30 (was 0xffffffff, writing 0x0)
<6>[ 9831.229755] [0: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x2c (was 0xffffffff, writing 0x77414e4)
<6>[ 9831.229787] [0: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x28 (was 0xffffffff, writing 0x0)
<6>[ 9831.229819] [0: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x24 (was 0xffffffff, writing 0x0)
<7>[ 9831.232708] [1: kworker/u16:22:32545] hub 1-0:1.0: hub_resume
<7>[ 9831.232788] [1: kworker/u16:22:32545] hub 1-0:1.0: port 2: status 0503 ch
ange 0000
<7>[ 9831.232940] [3: kworker/u16:8:32451] usb 1-2: finish resume
<6>[ 9831.235613] [3: kworker/u16:8:32451] [CHKRA:5]>
<6>[ 9831.259834] [0: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x20 (was 0xffffffff, writing 0x0)
<6>[ 9831.263087] [2: kworker/u16:26:32550] exynos-pcie 10ee0000.pcie0: D state
: 0, def200
<6>[ 9831.277741] [2: kworker/u16:26:32550] exynos-pcie 10ee0000.pcie0: exynos_
pcie_reset: Link up : 0x036c5011
<6>[ 9831.278154] [2: kworker/u16:26:32550] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, end of poweron, pcie state: 3
<6>[ 9831.289560] [2: kworker/u16:26:32550] mhi 0000:01:00.0: [debug] pmcsr reg
: 8 dev->current_state : 3
<6>[ 9831.289733] [2: kworker/u16:26:32550] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9831.289765] [2: kworker/u16:26:32550] exynos-pcie 10ee0000.pcie0: Recover
y for the link of RC0

<6>[ 9831.289795] [2: kworker/u16:26:32550] exynos-pcie 10ee0000.pcie0: Recover


config space of RC0 and its EP
<6>[ 9831.289822] [2: kworker/u16:26:32550] exynos-pcie 10ee0000.pcie0: Recover
RC0
<6>[ 9831.289850] [0: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x1c (was 0xffffffff, writing 0x0)
<6>[ 9831.289882] [2: kworker/u16:26:32550] exynos-pcie 10ee0000.pcie0: Recover
EP of RC0
<6>[ 9831.290370] [2: kworker/u16:26:32550] exynos-pcie 10ee0000.pcie0: Refresh
ing the saved config space in PCI framework for RC0 and its EP
<6>[ 9831.295718] [2: kworker/u16:26:32550] [mhi_turn_on_pcie_link] Exited...
<6>[ 9831.295756] [2: kworker/u16:26:32550] [mhi_initiate_m0] Setting M0 ...
<6>[ 9831.295860] [2: kworker/u16:26:32550] [mhi_initiate_m0] Exited...
<6>[ 9831.300298] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 5 link 1, ring type 2, index 0 db 0x5fa266d0
<6>[ 9831.300338] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9831.300411] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9831.300445] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9831.300475] [1:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9831.303736] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9831.303762] [2: kworker/u16:26:32550] [mhi_resume] Wait complete state: 2
<6>[ 9831.320155] [0: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x18 (was 0xffffffff, writing 0x1c400004)
<6>[ 9831.349360] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x14 (was 0xffffffff, writing 0x0)
<6>[ 9831.379365] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x10 (was 0xffffffff, writing 0x1c200004)
<6>[ 9831.409369] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0xc (was 0xffffffff, writing 0x10)
<6>[ 9831.409403] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x8 (was 0xffffffff, writing 0x2800003)
<6>[ 9831.409436] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x4 (was 0xffffffff, writing 0x100146)
<6>[ 9831.409468] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x0 (was 0xffffffff, writing 0x43e914e4)
<6>[ 9831.409519] [2: system_server: 4318] exynos-pcie 15660000.pcie1: exynos_
pcie_poweron, start of poweron, pcie state: 0
<6>[ 9831.430381] [2: system_server: 4318] exynos-pcie 15660000.pcie1: D state
: 0, d08a00
<6>[ 9831.431693] [2: system_server: 4318] exynos-pcie 15660000.pcie1: exynos_
pcie_reset: Link up : 0x03efde11
<6>[ 9831.431875] [2: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL: 2010
<6>[ 9831.431910] [2: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL: 42
<6>[ 9831.431937] [2: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL: 0
<6>[ 9831.432100] [2: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_RTCT
L: 0
<6>[ 9831.432134] [2: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL2: 400
<6>[ 9831.432167] [2: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL2: 1
<6>[ 9831.432194] [2: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL2: 0
<6>[ 9831.432232] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x3c (was 0x1ff, writing 0x101ed)

<6>[ 9831.432275] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co


nfig space at offset 0x38 (was 0x0, writing 0x0)
<6>[ 9831.432312] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x34 (was 0x40, writing 0x40)
<6>[ 9831.432479] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x30 (was 0x0, writing 0x0)
<6>[ 9831.432515] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x2c (was 0x0, writing 0x0)
<6>[ 9831.432551] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x28 (was 0x0, writing 0x0)
<6>[ 9831.432627] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x24 (was 0x0, writing 0x0)
<6>[ 9831.432665] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x20 (was 0x1ff01c00, writing 0x1ff01c00)
<6>[ 9831.432703] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x1c (was 0x0, writing 0x0)
<6>[ 9831.432870] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x18 (was 0x10100, writing 0x10100)
<6>[ 9831.432906] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x14 (was 0x0, writing 0x0)
<6>[ 9831.432942] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x10 (was 0x0, writing 0x0)
<6>[ 9831.432979] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0xc (was 0x10000, writing 0x10010)
<6>[ 9831.433022] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x8 (was 0x1, writing 0x6040001)
<6>[ 9831.433066] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x4 (was 0x100107, writing 0x100147)
<6>[ 9831.433239] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x0 (was 0xa575144d, writing 0xa575144d)
<6>[ 9831.433315] [2: system_server: 4318] exynos-pcie 15660000.pcie1: exynos_
pcie_poweron, end of poweron, pcie state: 3
<4>[ 9831.433342] [2: system_server: 4318] dhdpcie_resume_dev: Enter
<6>[ 9831.433474] [2: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_DEVCTL:
2c10
<6>[ 9831.433627] [2: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_LNKCTL:
142
<6>[ 9831.433653] [2: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_SLTCTL:
0
<6>[ 9831.433679] [2: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_RTCTL:
0
<6>[ 9831.433800] [2: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_DEVCTL2
: 400
<6>[ 9831.433917] [2: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_LNKCTL2
: 1
<6>[ 9831.433944] [2: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_SLTCTL2
: 0
<6>[ 9831.434091] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x3c (was 0x100, writing 0x1ed)
<6>[ 9831.434302] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x38 (was 0x0, writing 0x0)
<6>[ 9831.434453] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x34 (was 0x48, writing 0x48)
<6>[ 9831.434573] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x30 (was 0x0, writing 0x0)
<6>[ 9831.434730] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x2c (was 0x77414e4, writing 0x77414e4)
<6>[ 9831.434895] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x28 (was 0x0, writing 0x0)
<6>[ 9831.435016] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi

g space at offset 0x24 (was 0x0, writing 0x0)


<6>[ 9831.435171] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x20 (was 0x0, writing 0x0)
<6>[ 9831.435292] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x1c (was 0x0, writing 0x0)
<6>[ 9831.435449] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x18 (was 0x4, writing 0x1c400004)
<6>[ 9831.435659] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x18 (writing 0x1c400004)
<6>[ 9831.435811] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x14 (was 0x0, writing 0x0)
<6>[ 9831.435969] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x10 (was 0x4, writing 0x1c200004)
<6>[ 9831.436185] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x10 (writing 0x1c200004)
<6>[ 9831.436355] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0xc (was 0x0, writing 0x10)
<6>[ 9831.436566] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x8 (was 0x2800003, writing 0x2800003)
<6>[ 9831.436717] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x4 (was 0x100000, writing 0x100146)
<6>[ 9831.436973] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x0 (was 0x43e914e4, writing 0x43e914e4)
<4>[ 9831.438411] [2: system_server: 4318] dhdpcie_send_mb_data: H2D_MB_DATA:
0x00000010
<4>[ 9831.438462] [2: system_server: 4318] dhdpcie_send_mb_data: send H2D_HOST
_D0_INFORM to dongle
<6>[ 9831.439031] [2: system_server: 4318] PM: resume of devices complete afte
r 229.269 msecs
<7>[ 9831.443043] [0:
kworker/0:1:25228] max77843_fg_write_temp: temperature
to (256, 0x1999)
<6>[ 9831.443581] [0:
kworker/0:1:25228] max77843_fg_check_qrtable: QRTABLE2
0_REG(0x1603), QRTABLE30_REG(0x1005)
<6>[ 9831.445306] [0:
kworker/0:1:25228] power_supply battery: power_supply_
changed
<6>[ 9831.445347] [0:
kworker/0:1:25228] Skip monitor work(8, Vnow:4112mV, T
bat:256)
<6>[ 9831.445500] [0:
kworker/0:1:25228] sec_bat_get_property cable type = 1
sleep_mode = 0
<6>[ 9831.445550] [0:
kworker/0:1:25228] sec_bat_get_property cable type = 1
<7>[ 9831.445589]
<7>[ 9831.446757]
00 evt 0000
<3>[ 9831.447119]
<4>[ 9831.445625]
<6>[ 9831.450348]

[2: system_server: 4318] PM: Finishing wakeup.


[2:
khubd: 742] hub 1-0:1.0: state 7 ports 2 chg 00

<6>[ 9831.450392]
<6>[ 9831.450791]
os_runtime_suspend
<6>[ 9831.455829]
, exe_cmd 4
<6>[ 9831.455884]
dm_hotplug disable
<6>[ 9831.455973]
<6>[ 9831.456522]
sleep_mode = 0
<6>[ 9831.459399]
equest

[3:onic.tuiservice: 659] TUI_IO_WAITCMD


[0:
kworker/0:1:25228] exynos-dwc3 15400000.usb: dwc3_exyn

[2:
mdm_helper: 3355] esoc REQ enginer waiting on request
[3: system_server: 4318] Restarting tasks ... done.
[3:onic.tuiservice: 659] t-base-tui module: ioctl 0x80047402

[0: thread_hotplug:14016] frequency info : 400000, prev_cmd 1


[0: thread_hotplug:14016] lcd is on : 0, low power mode = 0,
= 0
[0: thread_hotplug:14016] cluster1 cores hotplug out : 0
[0:
healthd: 3346] sec_bat_get_property cable type = 1
[3: system_server: 4318] mdm_hsic_pm_notify_event: unblock r

<6>[ 9831.459460] [3: system_server: 4318] request_active_lock_set


<12>[ 9831.459538] [1:
healthd: 3346] healthd: battery l=99 v=4112 t=25.
6 h=2 st=3 c=0 o=1 ca=-320 ct=0 ps=0 chg= 2016-11-17 16:15:38.861222996 UTC
<12>[ 9831.459645] [1:
healthd: 3346] healthd: battery l=99 v=4112 t=25.
6 h=2 st=3 c=0 o=1 ca=-320 ct=0 ps=0 chg= 2016-11-17 16:15:38.861222996 UTC hv=0
sec=0 chg=
<6>[ 9831.459679] [3: system_server: 4318] PM: suspend exit 2016-11-17 16:15:3
8.862310038 UTC
<14>[ 9831.459703] [1:
healthd: 3346] healthd-android: healthd_mode_andr
oid_battery_update
<14>[ 9831.459757] [1:
healthd: 3346] BatteryPropertiesRegistrar: notify
Listeners : start
<14>[ 9831.460750] [1:
healthd: 3346] IBatteryPropertiesListener : batte
ryPropertiesChanged!
<14>[ 9831.460750] [1:
healthd: 3346] : BatteryPropertiesRegistrar: noti
fyListeners : done
<6>[ 9831.479303] [3: kworker/u16:26:32550] mdm_hsic_rpm_check
<6>[ 9831.479341] [3: kworker/u16:26:32550] mdm_hsic_rpm_restart
<6>[ 9831.512448] [1: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9831.512513] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[ 9831.512541] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[ 9831.512638] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9831.512845] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[ 9831.955129] [1:
kworker/1:3:17119] MIF(635000): unset TMU_COLD: 675000
=> (set_volt: 637500, get_volt: 637500)
<6>[ 9831.955819] [1:
kworker/1:3:17119] DISP(100000): unset TMU_COLD: (set_
volt: 650000, get_volt: 650000)
<6>[ 9831.957090] [1:
kworker/1:3:17119] INT(100000): unset TMU_COLD: 687500
=> 650000
<6>[ 9831.957125] [1:
kworker/1:3:17119] tmu temperature state 1 to 0, cur_t
emp : 33
<7>[ 9831.957203] [0:
kworker/0:1:25228] usb 1-2: usb auto-suspend, wakeup 1
<7>[ 9831.969370] [0:
kworker/0:1:25228] hub 1-0:1.0: hub_suspend
<7>[ 9831.969422] [0:
kworker/0:1:25228] usb usb1: bus auto-suspend, wakeup
1
<7>[ 9831.969445] [0:
kworker/0:1:25228] s5p-ehci 15510000.usb: suspend root
hub
<3>[ 9831.970796] [0:
kworker/0:1:25228] s5p-ehci 15510000.usb: s5p_ehci_run
time_suspend
<7>[ 9831.982668] [0:
kworker/0:1:25228] samsung-usb2phy 15530000.usb2phy: s
amsung_usb2phy_runtime_suspend
<6>[ 9831.982716] [0:
kworker/0:1:25228] request_active_lock_release
<6>[ 9831.982738] [0:
kworker/0:1:25228] s5p_ehci_runtime_suspend: usage=0,
child=0
<4>[ 9832.144539] [0:
Binder_D: 5893] KEK_PACK[5893] del_kek :: entered
<4>[ 9832.144567] [0:
Binder_D: 5893] KEK_PACK[5893] find_kek_pack :: Fou
nd kek-pack : 0
<4>[ 9832.144586] [0:
Binder_D: 5893] KEK_PACK[5893] find_kek_item :: Can
't find kek 10 : 0
<4>[ 9832.144604] [0:
Binder_D: 5893] KEK_PACK[5893] del_kek :: entered
<4>[ 9832.144621] [0:
Binder_D: 5893] KEK_PACK[5893] find_kek_pack :: Fou
nd kek-pack : 0
<4>[ 9832.144638] [0:
Binder_D: 5893] KEK_PACK[5893] find_kek_item :: Can
't find kek 12 : 0
<4>[ 9832.144655] [0:
Binder_D: 5893] KEK_PACK[5893] del_kek :: entered

<4>[ 9832.144672] [0:


Binder_D: 5893] KEK_PACK[5893] find_kek_pack :: Fou
nd kek-pack : 0
<4>[ 9832.144689] [0:
Binder_D: 5893] KEK_PACK[5893] find_kek_item :: Can
't find kek 14 : 0
<4>[ 9832.144706] [0:
Binder_D: 5893] KEK_PACK[5893] del_kek :: entered
<4>[ 9832.144722] [0:
Binder_D: 5893] KEK_PACK[5893] find_kek_pack :: Fou
nd kek-pack : 0
<4>[ 9832.144740] [0:
Binder_D: 5893] KEK_PACK[5893] find_kek_item :: Can
't find kek 16 : 0
<4>[ 9832.144760] [0:
Binder_D: 5893] running cache cleanup thread - sdpid : 0
<6>[ 9832.516112] [2: kworker/u16:26:32550] [mhi_initiate_m3] Entered MHI state
4, Pending M0 0 Pending M3 0
<6>[ 9832.516145] [2: kworker/u16:26:32550] [mhi_initiate_m3] Triggering wake o
ut of M2
<6>[ 9832.526566] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa266f0
<6>[ 9832.526598] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9832.526740] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9832.526759] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9832.526776] [2:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9832.527377] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9832.527461] [3: kworker/u16:26:32550] [mhi_initiate_m3] Cancelled M1 time
r, timer was active
<6>[ 9832.527554] [3: kworker/u16:26:32550] [mhi_initiate_m3] Waiting for M3 co
mpletion.
<6>[ 9832.536681] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9832.536814] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 5
<6>[ 9832.536832] [2:MHI_STATE_THREA: 4605] [process_M3_transition] Processing
M3 state transition
<6>[ 9832.536941] [3: kworker/u16:26:32550] [mhi_initiate_m3] M3 completion rec
eived
<6>[ 9832.536967] [3: kworker/u16:26:32550] [mhi_turn_off_pcie_link] Entered...
<6>[ 9832.549682] [0: kworker/u16:26:32550] mhi 0000:01:00.0: [debug] pmcsr reg
: b dev->current_state : 0
<6>[ 9832.549854] [0: kworker/u16:26:32550] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9832.549963] [0: kworker/u16:26:32550] exynos-pcie 10ee0000.pcie0: ack mes
sage is ok
<6>[ 9832.550008] [0: kworker/u16:26:32550] exynos-pcie 10ee0000.pcie0: receive
d Enter_L23_READY DLLP packet
<6>[ 9832.550061] [0: kworker/u16:26:32550] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[ 9832.550212] [0: kworker/u16:26:32550] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[ 9832.580366] [0: kworker/u16:26:32550] [mhi_turn_off_pcie_link] Exited...
<6>[ 9833.423043] [0: system_server: 4318] PM: suspend entry 2016-11-17 16:15:
40.825669568 UTC
<6>[ 9833.423101] [1: system_server: 4318] PM: Syncing filesystems ... done.
<7>[ 9833.435721] [1: system_server: 4318] PM: Preparing system for mem sleep
<6>[ 9833.435953] [2: system_server: 4318] exynos_dm_hotplug_notifier, 958 : d
ynamic_hotplug CMD_SLEEP_PREPARE
<6>[ 9833.435978] [2: system_server: 4318] nr_sleep_prepare_cpus : 4, tmp_nr_s
leep_prepare_cpus : 5
<6>[ 9833.436130] [0: thread_hotplug:14016] stopped thread_hotplug

<6>[ 9833.443059] [2: system_server: 4318]


> (set_volt: 675000, get_volt: 675000)
<6>[ 9833.445173] [2: system_server: 4318]
=> (set_volt: 687500, get_volt: 687500)
<6>[ 9833.445987] [2: system_server: 4318]
> 687500
<6>[ 9833.446011] [2: system_server: 4318]
<6>[ 9833.446039] [2: system_server: 4318]
uest
<3>[ 9833.447402] [0:
mdm_helper: 3355]
<4>[ 9833.447038] [2: system_server: 4318]
elapsed 0.006 seconds) done.
<4>[ 9833.453186] [2: system_server: 4318]
... (elapsed 0.006 seconds) done.
<7>[ 9833.459592] [2: system_server: 4318]
<4>[ 9833.459615] [2: system_server: 4318]
le_suspend to debug)
<6>[ 9833.461052] [2: system_server: 4318]
os_runtime_resume
<6>[ 9833.462714] [1: kworker/u16:26:32550]
<6>[ 9833.462744] [1: kworker/u16:26:32550]
MHI state 5
<4>[ 9833.462758] [2: system_server: 4318]
0x00000001
<6>[ 9833.462773] [1: kworker/u16:26:32550]
5, Pending M0 0 Pending M3 0
<6>[ 9833.462790] [1: kworker/u16:26:32550]
state 0.
<4>[ 9833.467242] [2: system_server: 4318]
_D3_INFORM to dongle
<4>[ 9833.469316] I[0:
swapper/0:
0]
<4>[ 9833.469337] I[0:
swapper/0:
0]
Received D3 ACK
<4>[ 9833.469723] [0: system_server: 4318]
0x00000008
<4>[ 9833.470075] [0: system_server: 4318]
_D0_INFORM_IN_USE to dongle
<4>[ 9833.470100] [0: system_server: 4318]
<6>[ 9833.470366] [0: system_server: 4318]
43e914e4
<6>[ 9833.470558] [0: system_server: 4318]
100146
<6>[ 9833.470759] [0: system_server: 4318]
2800003
<6>[ 9833.470956] [0: system_server: 4318]
10
<6>[ 9833.471159] [0: system_server: 4318]
1c200004
<6>[ 9833.471360] [0: system_server: 4318]
0
<6>[ 9833.471558] [0: system_server: 4318]
1c400004
<6>[ 9833.471760] [0: system_server: 4318]
0
<6>[ 9833.471961] [0: system_server: 4318]
0
<6>[ 9833.472160] [0: system_server: 4318]
0
<6>[ 9833.472361] [0: system_server: 4318]
0

MIF(635000): set TMU_COLD: 637500 =


DISP(100000): set TMU_COLD: 650000
INT(100000): set TMU_COLD: 650000 =
tmu temperature state 0 to 1
mdm_hsic_pm_notify_event: block req
esoc REQ engine released from wait
Freezing user space processes ... (
Freezing remaining freezable tasks
PM: Entering mem sleep
Suspending console(s) (use no_conso
exynos-dwc3 15400000.usb: dwc3_exyn
[mhi_suspend] [mhi_suspend]
[mhi_suspend] Entered, sys state 2,
dhdpcie_send_mb_data: H2D_MB_DATA:
[mhi_initiate_m3] Entered MHI state
[mhi_initiate_m3] MHI state 5, link
dhdpcie_send_mb_data: send H2D_HOST
D2H_MB_DATA: 0x00000001
dhdpcie_handle_mb_data D2H_MB_DATA:
dhdpcie_send_mb_data: H2D_MB_DATA:
dhdpcie_send_mb_data: send H2D_HOST
dhdpcie_suspend_dev: Enter
pcieh 0001:01:00.0: reg offset: 0:
pcieh 0001:01:00.0: reg offset: 4:
pcieh 0001:01:00.0: reg offset: 8:
pcieh 0001:01:00.0: reg offset: 12:
pcieh 0001:01:00.0: reg offset: 16:
pcieh 0001:01:00.0: reg offset: 20:
pcieh 0001:01:00.0: reg offset: 24:
pcieh 0001:01:00.0: reg offset: 28:
pcieh 0001:01:00.0: reg offset: 32:
pcieh 0001:01:00.0: reg offset: 36:
pcieh 0001:01:00.0: reg offset: 40:

<6>[ 9833.472587] [0: system_server:


77414e4
<6>[ 9833.472761] [0: system_server:
0
<6>[ 9833.472962] [0: system_server:
48
<6>[ 9833.473163] [0: system_server:
0
<6>[ 9833.473362] [0: system_server:
1ed
<6>[ 9833.473562] [0: system_server:
2c10
<6>[ 9833.473764] [0: system_server:
142
<6>[ 9833.473779] [0: system_server:
0
<6>[ 9833.473793] [0: system_server:
0
<6>[ 9833.473963] [0: system_server:
: 400
<6>[ 9833.474164] [0: system_server:
: 1
<6>[ 9833.474178] [0: system_server:
: 0
<6>[ 9833.476937] [0: system_server:
device_vendor_id reg : 43e914e4
<6>[ 9833.477318] [0: system_server:
PMCSR reg value: 4108
<6>[ 9833.477701] [0: system_server:
PMCSR reg value: 410b
<6>[ 9833.477869] [0: system_server:
device_vendor_id reg : 43e914e4
<6>[ 9833.489646] [0: system_server:
eg : 410b dev->current_state : 0
<6>[ 9833.489817] [0: system_server:
vendor_id reg : 43e914e4
<6>[ 9833.489852] [0: system_server:
0: a575144d
<6>[ 9833.489872] [0: system_server:
4: 100147
<6>[ 9833.489893] [0: system_server:
8: 6040001
<6>[ 9833.489912] [0: system_server:
12: 10010
<6>[ 9833.489932] [0: system_server:
16: 0
<6>[ 9833.489953] [0: system_server:
20: 0
<6>[ 9833.490104] [0: system_server:
24: 10100
<6>[ 9833.490124] [0: system_server:
28: 0
<6>[ 9833.490144] [0: system_server:
32: 1ff01c00
<6>[ 9833.490163] [0: system_server:
36: 0
<6>[ 9833.490183] [0: system_server:
40: 0
<6>[ 9833.490203] [0: system_server:
44: 0

4318] pcieh 0001:01:00.0: reg offset: 44:


4318] pcieh 0001:01:00.0: reg offset: 48:
4318] pcieh 0001:01:00.0: reg offset: 52:
4318] pcieh 0001:01:00.0: reg offset: 56:
4318] pcieh 0001:01:00.0: reg offset: 60:
4318] pcieh 0001:01:00.0: PCI_EXP_DEVCTL:
4318] pcieh 0001:01:00.0: PCI_EXP_LNKCTL:
4318] pcieh 0001:01:00.0: PCI_EXP_SLTCTL:
4318] pcieh 0001:01:00.0: PCI_EXP_RTCTL:
4318] pcieh 0001:01:00.0: PCI_EXP_DEVCTL2
4318] pcieh 0001:01:00.0: PCI_EXP_LNKCTL2
4318] pcieh 0001:01:00.0: PCI_EXP_SLTCTL2
4318] pcieh 0001:01:00.0: [debug] step 1,
4318] pcieh 0001:01:00.0: [debug] step 2,
4318] pcieh 0001:01:00.0: [debug] step 3,
4318] pcieh 0001:01:00.0: [debug] step 4,
4318] pcieh 0001:01:00.0: [debug] pmcsr r
4318] pcieh 0001:01:00.0: [debug] device_
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:

<6>[ 9833.490223] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:


48: 0
<6>[ 9833.490243] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
52: 40
<6>[ 9833.490263] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
56: 0
<6>[ 9833.490283] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
60: 101ed
<6>[ 9833.490442] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL: 2010
<6>[ 9833.490461] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL: 42
<6>[ 9833.490475] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL: 0
<6>[ 9833.490495] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_RTCT
L: 0
<6>[ 9833.490514] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL2: 400
<6>[ 9833.490534] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL2: 1
<6>[ 9833.490548] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL2: 0
<6>[ 9833.490666] [0: system_server: 4318] exynos-pcie 15660000.pcie1: ack mes
sage is ok
<6>[ 9833.490683] [0: system_server: 4318] exynos-pcie 15660000.pcie1: receive
d Enter_L23_READY DLLP packet
<6>[ 9833.490706] [0: system_server: 4318] exynos-pcie 15660000.pcie1: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[ 9833.490821] [0: system_server: 4318] exynos-pcie 15660000.pcie1: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[ 9833.493296] [0: system_server: 4318] voltage(793750) + volt_offset(37500
) is bigger than max_volt(793750)
<6>[ 9833.493333] [0: system_server: 4318] voltage(793750) + volt_offset(37500
) is bigger than max_volt(793750)
<6>[ 9833.494492] [0: system_server: 4318] DEVFREQ(MIF): suspend voltage(79375
0 793750)
<6>[ 9833.496625] [0: system_server: 4318] s2m_rtc_update: RTC_UPDATE_REGISTER
check : 0x00
<6>[ 9833.496799] [0: system_server: 4318] s2m-rtc s2m-rtc: s2m_rtc_read_time:
2016-11-17 16:15:40(0x10)PM
<5>[ 9833.497055] [0: system_server: 4318] sd 0:0:0:0: [sda] Synchronizing SCS
I cache
<6>[ 9833.502039] [0: system_server: 4318] s2m_rtc_update: RTC_UPDATE_REGISTER
check : 0x00
<6>[ 9833.502192] [0: system_server: 4318] s2m-rtc s2m-rtc: s2m_rtc_read_time:
2016-11-17 16:15:40(0x10)PM
<6>[ 9833.503437] [0: system_server: 4318] s2m_rtc_update: RTC_UPDATE_REGISTER
check : 0x00
<6>[ 9833.503599] [0: system_server: 4318] s2m-rtc s2m-rtc: s2m_rtc_read_time:
2016-11-17 16:15:40(0x10)PM
<6>[ 9833.503621] [0: system_server: 4318] s2m-rtc s2m-rtc: s2m_rtc_set_alarm:
2016-11-17 16:16:06(0x10)PM
<6>[ 9833.504971] [0: system_server: 4318] s2m_rtc_update: RTC_UPDATE_REGISTER
check : 0x00
<6>[ 9833.506304] [0: system_server: 4318] s2m_rtc_update: RTC_UPDATE_REGISTER
check : 0x00
<6>[ 9833.506680] [0: system_server: 4318] max86900_pm_suspend
<6>[ 9833.506914] [0: system_server: 4318] wake enabled for irq 7
<2>[ 9833.507026] [0: system_server: 4318] --------Si47xx i2c driver Si47xx_su
spend called

<2>[ 9833.507038] [0: system_server: 4318] Si47xx_suspend: device not supporte


d
<6>[ 9833.507069] [0: system_server: 4318] [VIB] max77843_haptic_suspend
<6>[ 9833.507084] [0: system_server: 4318] [VIB] max77843_haptic_i2c 0
<6>[ 9833.507901] [0: system_server: 4318] wake enabled for irq 4
<6>[ 9833.508011] [0: system_server: 4318] vfsspi_regulator_onoff: ocp off, sm
c ret = 0
<6>[ 9833.508023] [0: system_server: 4318] vfsspi_regulator_onoff: off
<6>[ 9833.508044] [0: system_server: 4318] vfsspi_pm_suspend
<6>[ 9833.508090] [0: system_server: 4318] [SSP] ssp_suspend:
<6>[ 9833.514569] [1: system_server: 4318] [SSP] ssp_send_cmd: command 0xd4 0
<6>[ 9833.514749] [1: system_server: 4318] mst_ldo_device_suspend
<6>[ 9833.514805] [1: system_server: 4318] MST_LDO_DRV]]] suspend
<6>[ 9833.514814] [1: system_server: 4318] MST_LDO_DRV]]] suspend success afte
r smc : 122f122
<6>[ 9833.542524] [3: system_server: 4318] [MAX98505_DEBUG] max98505_suspend:
enter
<6>[ 9833.542652] [3: system_server: 4318] pacific-audio sound.34: pacific_sus
pend_post : set AIF1 port slave
<6>[ 9833.542719] [3: system_server: 4318] wake enabled for irq 577
<6>[ 9833.542734] [3: system_server: 4318] wake enabled for irq 580
<4>[ 9833.542758] [3: system_server: 4318] certify_hall_suspend start
<4>[ 9833.542774] [3: system_server: 4318] [keys] certify_hall_suspend certify
_status : 0 (detach)
<4>[ 9833.542793] [3: system_server: 4318] hall_suspend start
<4>[ 9833.542806] [3: system_server: 4318] [keys] hall_suspend flip_status : 1
(open)
<6>[ 9833.555767] [0: system_server: 4318] [MIF] usb_phy_prepare_shutdown
<6>[ 9833.555787] [0: system_server: 4318] dev rdy val = 1
<6>[ 9833.555799] [0: system_server: 4318] set_host_stat:set host port power s
tatus to [0]
<6>[ 9833.585771] [0: system_server: 4318] wait_dev_pwr_stat:[PWR OFF]...
<6>[ 9833.594276] I[0: system_server: 4318] mdm_device_ready_irq_handler, irq:
host ready val : 00000000
<6>[ 9833.594289] I[0: system_server: 4318] mdm_device_ready_irq_handler, irq:
dev ready val : 00000000
<6>[ 9833.615740] [0: system_server: 4318] done
<7>[ 9833.615781] [0: system_server: 4318] samsung-usb2phy 15530000.usb2phy: s
amsung_usb2phy_shutdown: End of setting for shutdown
<6>[ 9833.616020] [0: system_server: 4318] spi suspend is handled in device su
spend, dma mode = 0, bus_num = 3
<6>[ 9833.616042] [0: system_server: 4318] spi suspend is handled in device su
spend, dma mode = 0, bus_num = 1
<6>[ 9833.616137] [0: system_server: 4318] 3s3c24xx_serial_shutdown: port=4 res
et
<6>[ 9833.617096] [0: system_server: 4318] PM: suspend of devices complete aft
er 154.881 msecs
<6>[ 9833.617111] [0: system_server: 4318] ---Enabled regulators--<6>[ 9833.617136] [0: system_server: 4318] LDO1: 1200000uV, 0xffffffea mode, n
ull
<6>[ 9833.619011] [0: system_server: 4318] VDDIO_1.8V_COMP: 1800000uV, 0xfffff
fea mode, null
<6>[ 9833.619862] [0: system_server: 4318] VDDD_RET_1.0V_COMP: 700000uV, 0xfff
fffea mode, null
<6>[ 9833.621698] [0: system_server: 4318] VDD20_1P8_AP: 1800000uV, 0xffffffea
mode, null
<6>[ 9833.622330] [0: system_server: 4318] VCC_1.8V_CODEC_PMIC: 1800000uV, 0xf
fffffea mode, spi0.0-DBVDD1, spi0.0-AVDD, regulator.47-SUPPLY
<6>[ 9833.623962] [0: system_server: 4318] regulator-dummy: -22uV, 0xffffffea
mode, null

<6>[ 9833.623977] [0: system_server: 4318] Always On regulator count :10 [VDD2
2_1P1_2MIC][vdd_ldo8][vdd_mldo][vdd_lldo][vdd_disp_cam0][vdd_int][vdd_apollo][vd
d_atlas][vdd_mif][safeout1_range]
<6>[ 9833.623989] [0: system_server: 4318] ---Enabled regulator count: 16--<6>[ 9833.625538] [0: system_server: 4318] PM: late suspend of devices complet
e after 1.532 msecs
<6>[ 9833.626331] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
0: ffffffff
<6>[ 9833.626349] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
4: ffffffff
<6>[ 9833.626364] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
8: ffffffff
<6>[ 9833.626378] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
12: ffffffff
<6>[ 9833.626393] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
16: ffffffff
<6>[ 9833.626407] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
20: ffffffff
<6>[ 9833.626421] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
24: ffffffff
<6>[ 9833.626436] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
28: ffffffff
<6>[ 9833.626450] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
32: ffffffff
<6>[ 9833.626464] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
36: ffffffff
<6>[ 9833.626479] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
40: ffffffff
<6>[ 9833.626493] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
44: ffffffff
<6>[ 9833.626507] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
48: ffffffff
<6>[ 9833.626522] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
52: ffffffff
<6>[ 9833.626536] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
56: ffffffff
<6>[ 9833.626551] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
60: ffffffff
<6>[ 9833.626566] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL: 0
<6>[ 9833.626580] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL: 0
<6>[ 9833.626594] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL: 0
<6>[ 9833.626608] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_RTCT
L: 0
<6>[ 9833.626623] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL2: 0
<6>[ 9833.626636] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL2: 0
<6>[ 9833.626650] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL2: 0
<6>[ 9833.627507] [0: system_server: 4318] exynos-pcie 15660000.pcie1: RC1 alr
eady off
<6>[ 9833.627526] [0: system_server: 4318] exynos-pcie 10ee0000.pcie0: RC0 alr
eady off
<6>[ 9833.627647] [0: system_server: 4318] spi suspend is handled in suspend_n
oirq, dma mode = 1, bus_num = 4
<6>[ 9833.627671] [0: system_server: 4318] spi suspend is handled in suspend_n
oirq, dma mode = 1, bus_num = 0

<6>[ 9833.627884] [0: system_server: 4318] PM: noirq suspend of devices comple
te after 2.326 msecs
<4>[ 9833.627899] [0: system_server: 4318] Disabling non-boot CPUs ...
<6>[ 9833.628198] [1: system_server: 4318] MobiCore mcd: <- core_num=0x0000000
0, active_cpu=0x00000001
<6>[ 9833.628260] [1:
mc_fastcall: 1747] MobiCore mcd: CoreSwap ok 1 -> 0
<4>[ 9833.628865] [1:
migration/1: 13] migrate_irqs: 34 callbacks suppress
ed
<4>[ 9833.628880] [1:
migration/1: 13] IRQ149 no longer affine to CPU1
<5>[ 9833.629914] [3: system_server: 4318] CPU1: shutdown
<4>[ 9833.631476] [2:
migration/2: 18] IRQ150 no longer affine to CPU2
<5>[ 9833.632501] [0: system_server: 4318] CPU2: shutdown
<4>[ 9833.634003] [3:
migration/3: 23] IRQ151 no longer affine to CPU3
<4>[ 9833.634098] [3:
migration/3: 23] IRQ250 no longer affine to CPU3
<5>[ 9833.635013] [0: system_server: 4318] CPU3: shutdown
<4>[ 9833.636500] [4:
migration/4: 28] IRQ152 no longer affine to CPU4
<5>[ 9833.637260] [0: system_server: 4318] CPU4: shutdown
<6>[ 9833.638095] [0: system_server: 4318] [MIF] 1552000Khz
<6>[ 9833.638095] [0: system_server: 4318] WAKEUP_STAT: 0x80000001
<6>[ 9833.638095] [0: system_server: 4318] EINT_PEND: 0x00, 0x40 0x08, 0x00
<6>[ 9833.638095] [0: system_server: 4318] Resume caused by IRQ 586, dhdpcie_h
ost_wake
<6>[ 9833.638095] [0: system_server: 4318] Suspended for 0.000 seconds
<6>[ 9833.638243] [0: system_server: 4318] Enabling non-boot CPUs ...
<4>[ 9833.638395] [1:
swapper/1:
0] CPU1: Booted secondary processor
<6>[ 9833.638975] [0: system_server: 4318] MobiCore mcd: <- core_num=0x0000000
1, active_cpu=0x00000000
<6>[ 9833.639026] [0:
mc_fastcall: 1747] MobiCore mcd: CoreSwap ok 0 -> 1
<6>[ 9833.639064] [0: system_server: 4318] CPU1 is up
<4>[ 9833.639187] [2:
swapper/2:
0] CPU2: Booted secondary processor
<6>[ 9833.639729] [0: system_server: 4318] CPU2 is up
<4>[ 9833.639851] [3:
swapper/3:
0] CPU3: Booted secondary processor
<6>[ 9833.640301] [0: system_server: 4318] CPU3 is up
<4>[ 9833.640502] [4:
swapper/4:
0] CPU4: Booted secondary processor
<6>[ 9833.641174] [0: system_server: 4318] CPU4 is up
<6>[ 9833.641373] [0: system_server: 4318] spi resume is handled in resume_noi
rq, dma mode = 1, bus_num = 0
<6>[ 9833.641435] [0: system_server: 4318] spi resume is handled in resume_noi
rq, dma mode = 1, bus_num = 4
<6>[ 9833.655927] [1: system_server: 4318] pcieport 0001:00:00.0: [debug] pmcs
r reg : ffff dev->current_state : 3
<6>[ 9833.655941] [1: system_server: 4318] pcieport 0001:00:00.0: [debug] devi
ce_vendor_id reg : ffffffff
<6>[ 9833.655953] [1: system_server: 4318] pcieport 0001:00:00.0: Refused to c
hange power state, currently in D3, PCI_PM_CTRL=ffff
<6>[ 9833.655966] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL: 0
<6>[ 9833.655976] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL: 0
<6>[ 9833.655986] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL: 0
<6>[ 9833.655995] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_RTCT
L: 0
<6>[ 9833.656006] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL2: 0
<6>[ 9833.656015] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL2: 0
<6>[ 9833.656024] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL2: 0
<6>[ 9833.656036] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co

nfig space at offset 0x3c (was 0xffffffff, writing 0xffffffff)


<6>[ 9833.656048] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x38 (was 0xffffffff, writing 0xffffffff)
<6>[ 9833.656059] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x34 (was 0xffffffff, writing 0xffffffff)
<6>[ 9833.656069] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x30 (was 0xffffffff, writing 0xffffffff)
<6>[ 9833.656080] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x2c (was 0xffffffff, writing 0xffffffff)
<6>[ 9833.656091] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x28 (was 0xffffffff, writing 0xffffffff)
<6>[ 9833.656101] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x24 (was 0xffffffff, writing 0xffffffff)
<6>[ 9833.656112] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x20 (was 0xffffffff, writing 0xffffffff)
<6>[ 9833.656123] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x1c (was 0xffffffff, writing 0xffffffff)
<6>[ 9833.656134] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x18 (was 0xffffffff, writing 0xffffffff)
<6>[ 9833.656145] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x14 (was 0xffffffff, writing 0xffffffff)
<6>[ 9833.656155] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x10 (was 0xffffffff, writing 0xffffffff)
<6>[ 9833.656166] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0xc (was 0xffffffff, writing 0xffffffff)
<6>[ 9833.656177] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x8 (was 0xffffffff, writing 0xffffffff)
<6>[ 9833.656188] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x4 (was 0xffffffff, writing 0xffffffff)
<6>[ 9833.656199] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x0 (was 0xffffffff, writing 0xffffffff)
<6>[ 9833.656220] [1: system_server: 4318] pcieh 0001:01:00.0: [debug] step 1,
device_vendor_id reg : ffffffff
<6>[ 9833.656230] [1: system_server: 4318] pcieh 0001:01:00.0: [debug] step 2,
PMCSR reg value: ffff
<6>[ 9833.656240] [1: system_server: 4318] pcieh 0001:01:00.0: [debug] step 3,
PMCSR reg value: 0
<6>[ 9833.656250] [1: system_server: 4318] pcieh 0001:01:00.0: [debug] step 4,
device_vendor_id reg : ffffffff
<6>[ 9833.669233] [1: system_server: 4318] pcieh 0001:01:00.0: [debug] pmcsr r
eg : ffff dev->current_state : 3
<6>[ 9833.669244] [1: system_server: 4318] pcieh 0001:01:00.0: [debug] device_
vendor_id reg : ffffffff
<6>[ 9833.669254] [1: system_server: 4318] pcieh 0001:01:00.0: Refused to chan
ge power state, currently in D3, PCI_PM_CTRL=ffff
<6>[ 9833.669267] [1: system_server: 4318] exynos-pcie 15660000.pcie1: PCIE li
nk state is 0
<6>[ 9833.669277] [1: system_server: 4318] pcieh 0001:01:00.0: [debug] setp 5,
PMCSR reg value: ffff
<6>[ 9833.669288] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_DEVCTL:
2c10
<6>[ 9833.669298] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_LNKCTL:
142
<6>[ 9833.669307] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_SLTCTL:
0
<6>[ 9833.669316] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_RTCTL:
0
<6>[ 9833.669326] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_DEVCTL2
: 400
<6>[ 9833.669335] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_LNKCTL2

: 1
<6>[ 9833.669344] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_SLTCTL2
: 0
<6>[ 9833.669354] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x3c (was 0xffffffff, writing 0x1ed)
<6>[ 9833.669366] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x38 (was 0xffffffff, writing 0x0)
<6>[ 9833.669377] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x34 (was 0xffffffff, writing 0x48)
<6>[ 9833.669388] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x30 (was 0xffffffff, writing 0x0)
<6>[ 9833.669399] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x2c (was 0xffffffff, writing 0x77414e4)
<6>[ 9833.669410] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x28 (was 0xffffffff, writing 0x0)
<6>[ 9833.669421] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x24 (was 0xffffffff, writing 0x0)
<6>[ 9833.699391] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x20 (was 0xffffffff, writing 0x0)
<6>[ 9833.729360] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x1c (was 0xffffffff, writing 0x0)
<6>[ 9833.759330] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x18 (was 0xffffffff, writing 0x1c400004)
<6>[ 9833.789298] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x14 (was 0xffffffff, writing 0x0)
<6>[ 9833.819267] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x10 (was 0xffffffff, writing 0x1c200004)
<6>[ 9833.849236] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0xc (was 0xffffffff, writing 0x10)
<6>[ 9833.849248] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x8 (was 0xffffffff, writing 0x2800003)
<6>[ 9833.849259] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x4 (was 0xffffffff, writing 0x100146)
<6>[ 9833.849270] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x0 (was 0xffffffff, writing 0x43e914e4)
<6>[ 9833.862569] [1: system_server: 4318] pcieport 0000:00:00.0: [debug] pmcs
r reg : ffff dev->current_state : 3
<6>[ 9833.862580] [1: system_server: 4318] pcieport 0000:00:00.0: [debug] devi
ce_vendor_id reg : ffffffff
<6>[ 9833.862591] [1: system_server: 4318] pcieport 0000:00:00.0: Refused to c
hange power state, currently in D3, PCI_PM_CTRL=ffff
<6>[ 9833.875892] [1: system_server: 4318] mhi 0000:01:00.0: [debug] pmcsr reg
: ffff dev->current_state : 3
<6>[ 9833.875903] [1: system_server: 4318] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : ffffffff
<6>[ 9833.875913] [1: system_server: 4318] mhi 0000:01:00.0: Refused to change
power state, currently in D3, PCI_PM_CTRL=ffff
<6>[ 9833.876031] [1: system_server: 4318] PM: noirq resume of devices complet
e after 234.842 msecs
<6>[ 9833.876502] [1: system_server: 4318] exynos-mailbox 11240000.mailbox: Lo
ading APM firmware ...
<6>[ 9833.876669] [1: system_server: 4318] OK
<6>[ 9833.877770] [1: system_server: 4318] PM: early resume of devices complet
e after 1.371 msecs
<6>[ 9833.878005] [0: kworker/u16:29:32553] [mhi_resume] [mhi_resume]
<6>[ 9833.878022] [0: kworker/u16:29:32553] [mhi_initiate_m0] Entered MHI state
5, Pending M0 0 Pending M3 0
<6>[ 9833.878032] [0: kworker/u16:29:32553] [mhi_initiate_m0] Waiting for M0 M1
or M3. Currently 5...
<6>[ 9833.878042] [0: kworker/u16:29:32553] [mhi_initiate_m0] Wait complete sta

te: 5
<6>[ 9833.878052] [0: kworker/u16:29:32553] [mhi_turn_on_pcie_link] Entered...
<6>[ 9833.878067] [0: kworker/u16:29:32553] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, start of poweron, pcie state: 0
<6>[ 9833.878250] [1: system_server: 4318] s3c2410_wdt: watchdog enabled
<6>[ 9833.881685] [1: system_server: 4318] spi resume is handled in device res
ume, dma mode = 0, bus_num = 1
<6>[ 9833.881720] [1: system_server: 4318] spi resume is handled in device res
ume, dma mode = 0, bus_num = 3
<7>[ 9833.881952] [1: system_server: 4318] samsung-usb2phy 15530000.usb2phy: C
an't configure specified phy mode
<7>[ 9833.881971] [1: system_server: 4318] samsung-usb2phy 15530000.usb2phy: e
nd of samsung_usb2phy_init
<7>[ 9833.881985] [1: system_server: 4318] samsung-usb2phy 15530000.usb2phy: s
amsung_usb2phy_runtime_resume
<4>[ 9833.882006] [1: system_server: 4318] usb usb1: root hub lost power or wa
s reset
<7>[ 9833.882028] [1: system_server: 4318] s5p-ehci 15510000.usb: reset comman
d 0080b02 park=3 ithresh=8 period=1024 Reset HALT
<6>[ 9833.882045] [1: system_server: 4318] dev rdy val = 0
<6>[ 9833.882052] [1: system_server: 4318] set_host_stat:set host port power s
tatus to [1]
<6>[ 9833.882063] [1: system_server: 4318] wait_dev_pwr_stat:[PWR ON]...
<6>[ 9833.903464] I[0:
swapper/0:
0] mdm_device_ready_irq_handler, irq:
host ready val : 00000001
<6>[ 9833.903474] I[0:
swapper/0:
0] mdm_device_ready_irq_handler, irq:
dev ready val : 00000001
<6>[ 9833.912025] [1: system_server: 4318] done
<7>[ 9833.912062] [2: kworker/u16:21:32544] usb usb1: usb resume
<7>[ 9833.912076] [2: kworker/u16:21:32544] s5p-ehci 15510000.usb: resume root
hub after power loss
<7>[ 9833.912087] [2: kworker/u16:21:32544] s5p-ehci 15510000.usb: LRESET 0
<7>[ 9833.912111] [2: kworker/u16:21:32544] hub 1-0:1.0: hub_reset_resume
<7>[ 9833.912122] [2: kworker/u16:21:32544] hub 1-0:1.0: enabling power on all
ports
<6>[ 9833.916250] [0: kworker/u16:29:32553] exynos-pcie 10ee0000.pcie0: D state
: 0, 61cb00
<6>[ 9833.928515] [1: kworker/u16:29:32553] exynos-pcie 10ee0000.pcie0: exynos_
pcie_reset: Link up : 0x036ff411
<6>[ 9833.928747] [1: kworker/u16:29:32553] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, end of poweron, pcie state: 3
<6>[ 9833.939438] [1: kworker/u16:29:32553] mhi 0000:01:00.0: [debug] pmcsr reg
: 8 dev->current_state : 3
<6>[ 9833.939614] [1: kworker/u16:29:32553] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9833.939626] [1: kworker/u16:29:32553] exynos-pcie 10ee0000.pcie0: Recover
y for the link of RC0
<6>[ 9833.939637] [1: kworker/u16:29:32553] exynos-pcie 10ee0000.pcie0: Recover
config space of RC0 and its EP
<6>[ 9833.939646] [1: kworker/u16:29:32553] exynos-pcie 10ee0000.pcie0: Recover
RC0
<6>[ 9833.939674] [1: kworker/u16:29:32553] exynos-pcie 10ee0000.pcie0: Recover
EP of RC0
<6>[ 9833.940063] [1: kworker/u16:29:32553] exynos-pcie 10ee0000.pcie0: Refresh
ing the saved config space in PCI framework for RC0 and its EP
<7>[ 9833.942600] [2: kworker/u16:21:32544] s5p-ehci 15510000.usb: GetStatus po
rt:2 status 001803 0 ACK POWER sig=j CSC CONNECT
<7>[ 9833.942613] [2: kworker/u16:21:32544] hub 1-0:1.0: port 2: status 0501 ch
ange 0001
<7>[ 9833.942686] [2: kworker/u16:2:15392] usb 1-2: finish reset-resume

<6>[ 9833.945266] [1: kworker/u16:29:32553] [mhi_turn_on_pcie_link] Exited...


<6>[ 9833.945280] [1: kworker/u16:29:32553] [mhi_initiate_m0] Setting M0 ...
<6>[ 9833.945425] [1: kworker/u16:29:32553] [mhi_initiate_m0] Exited...
<6>[ 9833.949863] [0: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 5 link 1, ring type 2, index 0 db 0x5fa26710
<6>[ 9833.949878] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9833.949910] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9833.949922] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9833.949933] [2:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9833.950243] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9833.950252] [1: kworker/u16:29:32553] [mhi_resume] Wait complete state: 2
<4>[ 9833.954934] [0: system_server: 4318] ufs_get_device_info: UNIQUE NUMBER
= 02157df271b5cb31 , LT: 0x22
<6>[ 9833.958633] [0: system_server: 4318] exynos-ufs 15570000.ufs: Power mode
change(0): M(1)G(2)L(2)HS-series(2)
<4>[ 9833.958962] [0: system_server: 4318] hall_resume start
<4>[ 9833.958973] [0: system_server: 4318] [keys] hall_resume flip_status : 1
(open)
<4>[ 9833.958987] [0: system_server: 4318] certify_hall_resume start
<4>[ 9833.958997] [0: system_server: 4318] [keys] certify_hall_resume certify_
status : 0 (detach)
<6>[ 9833.959016] [0: system_server: 4318] wake disabled for irq 577
<6>[ 9833.959026] [0: system_server: 4318] wake disabled for irq 580
<6>[ 9833.959159] [0:
kworker/0:0:13589] [MAX98505_DEBUG] max98505_resume: e
nter
<6>[ 9833.964786] [0: system_server: 4318] mst_ldo_device_resume
<6>[ 9833.964826] [0: system_server: 4318] MST_LDO_DRV]]] resume
<6>[ 9833.964832] [0: system_server: 4318] MST_LDO_DRV]]] resume success after
smc : 122f122
<6>[ 9833.964937] [0: system_server: 4318] [SSP] ssp_resume:
<6>[ 9833.971128] [1: system_server: 4318] [SSP] ssp_send_cmd: command 0xd3 0
<3>[ 9833.971158] [1: system_server: 4318] vfsspi_wakeup_daemon send signal fa
iled by wakeup(0)
<6>[ 9833.971191] [1: system_server: 4318] vfsspi_regulator_onoff: ocp on, smc
ret = 0
<6>[ 9833.974264] [1: system_server: 4318] vfsspi_regulator_onoff: on
<6>[ 9833.974280] [1: system_server: 4318] vfsspi_pm_resume
<6>[ 9833.974332] [1: system_server: 4318] wake disabled for irq 4
<6>[ 9833.974368] [1: system_server: 4318] [VIB] max77843_haptic_resume
<2>[ 9833.974383] [1: system_server: 4318] Si47xx_resume: device not supported
<6>[ 9833.974402] [1: system_server: 4318] wake disabled for irq 7
<6>[ 9833.974608] [1: system_server: 4318] max86900_pm_resume
<6>[ 9833.976472] [1: system_server: 4318] s2m_rtc_update: RTC_UPDATE_REGISTER
check : 0x00
<6>[ 9833.976606] [1: system_server: 4318] s2m-rtc s2m-rtc: s2m_rtc_read_time:
2016-11-17 16:15:52(0x10)PM
<6>[ 9833.979406] [1: system_server: 4318] exynos-pcie 15660000.pcie1: exynos_
pcie_poweron, start of poweron, pcie state: 0
<7>[ 9833.995995] [2: kworker/u16:2:15392] s5p-ehci 15510000.usb: port 2 reset
complete, port enabled
<7>[ 9833.996021] [2: kworker/u16:2:15392] s5p-ehci 15510000.usb: GetStatus po
rt:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
<6>[ 9834.000191] [1: system_server: 4318] exynos-pcie 15660000.pcie1: D state
: 0, ca7900
<6>[ 9834.001495] [1: system_server: 4318] exynos-pcie 15660000.pcie1: exynos_
pcie_reset: Link up : 0x039ff111
<6>[ 9834.001797] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC

TL: 2010
<6>[ 9834.001814] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL: 42
<6>[ 9834.001823] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL: 0
<6>[ 9834.001838] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_RTCT
L: 0
<6>[ 9834.001854] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL2: 400
<6>[ 9834.001870] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL2: 1
<6>[ 9834.001880] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL2: 0
<6>[ 9834.001902] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x3c (was 0x1ff, writing 0x101ed)
<6>[ 9834.001926] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x38 (was 0x0, writing 0x0)
<6>[ 9834.001942] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x34 (was 0x40, writing 0x40)
<6>[ 9834.001958] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x30 (was 0x0, writing 0x0)
<6>[ 9834.001975] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x2c (was 0x0, writing 0x0)
<6>[ 9834.001990] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x28 (was 0x0, writing 0x0)
<6>[ 9834.002007] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x24 (was 0x0, writing 0x0)
<6>[ 9834.002023] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x20 (was 0x1ff01c00, writing 0x1ff01c00)
<6>[ 9834.002040] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x1c (was 0x0, writing 0x0)
<6>[ 9834.002057] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x18 (was 0x10100, writing 0x10100)
<6>[ 9834.002073] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x14 (was 0x0, writing 0x0)
<6>[ 9834.002090] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x10 (was 0x0, writing 0x0)
<6>[ 9834.002106] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0xc (was 0x10000, writing 0x10010)
<6>[ 9834.002127] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x8 (was 0x1, writing 0x6040001)
<6>[ 9834.002149] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x4 (was 0x100107, writing 0x100147)
<6>[ 9834.002171] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x0 (was 0xa575144d, writing 0xa575144d)
<6>[ 9834.002232] [1: system_server: 4318] exynos-pcie 15660000.pcie1: exynos_
pcie_poweron, end of poweron, pcie state: 3
<4>[ 9834.002246] [1: system_server: 4318] dhdpcie_resume_dev: Enter
<6>[ 9834.002670] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_DEVCTL:
2c10
<6>[ 9834.003046] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_LNKCTL:
142
<6>[ 9834.003057] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_SLTCTL:
0
<6>[ 9834.003066] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_RTCTL:
0
<6>[ 9834.003442] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_DEVCTL2
: 400
<6>[ 9834.003819] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_LNKCTL2
: 1

<6>[ 9834.003828] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_SLTCTL2


: 0
<6>[ 9834.004206] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x3c (was 0x100, writing 0x1ed)
<6>[ 9834.004675] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x38 (was 0x0, writing 0x0)
<6>[ 9834.004777] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x34 (was 0x48, writing 0x48)
<6>[ 9834.004878] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x30 (was 0x0, writing 0x0)
<6>[ 9834.004979] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x2c (was 0x77414e4, writing 0x77414e4)
<6>[ 9834.005081] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x28 (was 0x0, writing 0x0)
<6>[ 9834.005183] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x24 (was 0x0, writing 0x0)
<6>[ 9834.005284] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x20 (was 0x0, writing 0x0)
<6>[ 9834.005386] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x1c (was 0x0, writing 0x0)
<6>[ 9834.005487] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x18 (was 0x4, writing 0x1c400004)
<6>[ 9834.005679] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x18 (writing 0x1c400004)
<6>[ 9834.005780] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x14 (was 0x0, writing 0x0)
<6>[ 9834.005900] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x10 (was 0x4, writing 0x1c200004)
<6>[ 9834.006120] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x10 (writing 0x1c200004)
<6>[ 9834.006221] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0xc (was 0x0, writing 0x10)
<6>[ 9834.006413] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x8 (was 0x2800003, writing 0x2800003)
<6>[ 9834.006515] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x4 (was 0x100000, writing 0x100146)
<6>[ 9834.006707] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x0 (was 0x43e914e4, writing 0x43e914e4)
<4>[ 9834.008088] [1: system_server: 4318] dhdpcie_send_mb_data: H2D_MB_DATA:
0x00000010
<4>[ 9834.008121] [1: system_server: 4318] dhdpcie_send_mb_data: send H2D_HOST
_D0_INFORM to dongle
<6>[ 9834.009318] [2: kworker/u16:2:15392] usb 1-2: reset high-speed USB devic
e number 2 using s5p-ehci
<7>[ 9834.027281] [0: kworker/u16:2:15392] usb 1-2: USB quirks for this device
: 100
<6>[ 9834.031371] [0: kworker/u16:2:15392] [CHKRA:5]>
<6>[ 9834.031804] [1: system_server: 4318] PM: resume of devices complete afte
r 154.016 msecs
<6>[ 9834.033251] I[0:
swapper/0:
0] [NACB:5]<
<6>[ 9834.033262] I[0:
swapper/0:
0] notification_available_cb: set lpa
handling to false
<6>[ 9834.033290] I[0:
swapper/0:
0] [CHKRA:5]>
<7>[ 9834.035210] [0:
kworker/0:0:13589] max77843_fg_write_temp: temperature
to (256, 0x1999)
<6>[ 9834.035631] [0:
kworker/0:0:13589] max77843_fg_check_qrtable: QRTABLE2
0_REG(0x1603), QRTABLE30_REG(0x1005)
<7>[ 9834.036557] [1: system_server: 4318] PM: Finishing wakeup.
<6>[ 9834.037110] [0:
kworker/0:0:13589] power_supply battery: power_supply_
changed

<6>[ 9834.037132] [0:


Tbat:256)
<6>[ 9834.037220] [0:
sleep_mode = 0
<6>[ 9834.037243] [0:

kworker/0:0:13589] Skip monitor work(22, Vnow:4098mV,


kworker/0:0:13589] sec_bat_get_property cable type = 1
kworker/0:0:13589] sec_bat_get_property cable type = 1

<6>[ 9834.037574] [0:


kworker/0:0:13589] exynos-dwc3 15400000.usb: dwc3_exyn
os_runtime_suspend
<3>[ 9834.037781] [0:
mdm_helper: 3355] esoc REQ enginer waiting on request
<6>[ 9834.040487] [2:
healthd: 3346] sec_bat_get_property cable type = 1
sleep_mode = 0
<7>[ 9834.040926] [3:
khubd: 742] hub 1-0:1.0: state 7 ports 2 chg 00
04 evt 0000
<6>[ 9834.040996] [3:
khubd: 742] hub 1-0:1.0: port 2, status 0503, c
hange 0000, 480 Mb/s
<12>[ 9834.041005] [2:
healthd: 3346] healthd: battery l=99 v=4098 t=25.
6 h=2 st=3 c=0 o=1 ca=-320 ct=0 ps=0 chg= 2016-11-17 16:15:52.679249645 UTC
<12>[ 9834.041033] [2:
healthd: 3346] healthd: battery l=99 v=4098 t=25.
6 h=2 st=3 c=0 o=1 ca=-320 ct=0 ps=0 chg= 2016-11-17 16:15:52.679249645 UTC hv=0
sec=0 chg=
<14>[ 9834.041059] [2:
healthd: 3346] healthd-android: healthd_mode_andr
oid_battery_update
<14>[ 9834.041082] [2:
healthd: 3346] BatteryPropertiesRegistrar: notify
Listeners : start
<4>[ 9834.036570] [2:
healthd: 3346] Restarting tasks ...
IBatteryPropertiesListener : batteryPropertiesChanged!
<14>[ 9834.041114] [2:
healthd: 3346] : <6>[ 9834.044091] [0:onic.tuise
rvice: 659] t-base-tui module: ioctl 0x80047402
<6>[ 9834.044111] [0:onic.tuiservice: 659] TUI_IO_WAITCMD
<4>[ 9834.044541] [1: system_server: 4318] done.
<14>[ 9834.045269] [2:
healthd: 3346] BatteryPropertiesRegistrar: notify
Listeners : done
<6>[ 9834.045603] [0: thread_hotplug:14045] frequency info : 1200000, prev_cmd
1, exe_cmd 4
<6>[ 9834.045624] [0: thread_hotplug:14045] lcd is on : 0, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9834.045637] [0: thread_hotplug:14045] cluster1 cores hotplug out : 0
<6>[ 9834.051209] [2: system_server: 4318] mdm_hsic_pm_notify_event: unblock r
equest
<6>[ 9834.051238] [2: system_server: 4318] request_active_lock_set
<6>[ 9834.051372] [2: system_server: 4318] PM: suspend exit 2016-11-17 16:15:5
2.689693188 UTC
<6>[ 9834.069356] [3: kworker/u16:6:32449] mdm_hsic_rpm_check
<6>[ 9834.069388] [3: kworker/u16:6:32449] mdm_hsic_rpm_restart
<6>[ 9834.161551] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9834.161743] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[ 9834.161765] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[ 9834.161787] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9834.161986] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<7>[ 9834.545358] [0:
kworker/0:0:13589] usb 1-2: usb auto-suspend, wakeup 1
<6>[ 9834.550795] [1:
kworker/1:3:17119] MIF(418000): unset TMU_COLD: 612500
=> (set_volt: 575000, get_volt: 575000)
<6>[ 9834.552029] [1:
kworker/1:3:17119] DISP(100000): unset TMU_COLD: (set_
volt: 650000, get_volt: 650000)
<6>[ 9834.553399] [1:
kworker/1:3:17119] INT(100000): unset TMU_COLD: 687500

=> 650000
<6>[ 9834.553447] [1:
kworker/1:3:17119] tmu temperature state 1 to 0, cur_t
emp : 30
<7>[ 9834.556044] [0:
kworker/0:0:13589] hub 1-0:1.0: hub_suspend
<7>[ 9834.556116] [0:
kworker/0:0:13589] usb usb1: bus auto-suspend, wakeup
1
<7>[ 9834.556168] [0:
kworker/0:0:13589] s5p-ehci 15510000.usb: suspend root
hub
<3>[ 9834.557642] [0:
kworker/0:0:13589] s5p-ehci 15510000.usb: s5p_ehci_run
time_suspend
<7>[ 9834.569466] [0:
kworker/0:0:13589] samsung-usb2phy 15530000.usb2phy: s
amsung_usb2phy_runtime_suspend
<6>[ 9834.569536] [0:
kworker/0:0:13589] request_active_lock_release
<6>[ 9834.569581] [0:
kworker/0:0:13589] s5p_ehci_runtime_suspend: usage=0,
child=0
<6>[ 9834.699707] [3: system_server: 4318] PM: suspend entry 2016-11-17 16:15:
53.338010211 UTC
<6>[ 9834.699762] [3: system_server: 4318] PM: Syncing filesystems ... done.
<7>[ 9834.713545] [3: system_server: 4318] PM: Preparing system for mem sleep
<6>[ 9834.713867] [0: system_server: 4318] exynos_dm_hotplug_notifier, 958 : d
ynamic_hotplug CMD_SLEEP_PREPARE
<6>[ 9834.713918] [0: system_server: 4318] nr_sleep_prepare_cpus : 4, tmp_nr_s
leep_prepare_cpus : 5
<6>[ 9834.713992] [0: thread_hotplug:14045] stopped thread_hotplug
<6>[ 9834.724929] [0: system_server: 4318] MIF(418000): set TMU_COLD: 575000 =
> (set_volt: 612500, get_volt: 612500)
<6>[ 9834.725811] [0: system_server: 4318] DISP(100000): set TMU_COLD: 650000
=> (set_volt: 687500, get_volt: 687500)
<6>[ 9834.726954] [0: system_server: 4318] INT(100000): set TMU_COLD: 650000 =
> 687500
<6>[ 9834.727001] [0: system_server: 4318] tmu temperature state 0 to 1
<6>[ 9834.727055] [0: system_server: 4318] mdm_hsic_pm_notify_event: block req
uest
<3>[ 9834.729159] [2:
mdm_helper: 3355] esoc REQ engine released from wait
<4>[ 9834.728383] [0: system_server: 4318] Freezing user space processes ... (
elapsed 0.008 seconds) done.
<4>[ 9834.737037] [0: system_server: 4318] Freezing remaining freezable tasks
... (elapsed 0.008 seconds) done.
<7>[ 9834.745984] [0: system_server: 4318] PM: Entering mem sleep
<4>[ 9834.746027] [0: system_server: 4318] Suspending console(s) (use no_conso
le_suspend to debug)
<6>[ 9834.748174] [0: system_server: 4318] exynos-dwc3 15400000.usb: dwc3_exyn
os_runtime_resume
<6>[ 9834.750800] [1: kworker/u16:6:32449] [mhi_suspend] [mhi_suspend]
<4>[ 9834.750844] [0: system_server: 4318] dhdpcie_send_mb_data: H2D_MB_DATA:
0x00000001
<6>[ 9834.750870] [1: kworker/u16:6:32449] [mhi_suspend] Entered, sys state 2,
MHI state 4
<6>[ 9834.750911] [1: kworker/u16:6:32449] [mhi_initiate_m3] Entered MHI state
4, Pending M0 0 Pending M3 0
<6>[ 9834.750944] [1: kworker/u16:6:32449] [mhi_initiate_m3] Triggering wake o
ut of M2
<6>[ 9834.755217] [1: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26730
<6>[ 9834.755260] [1: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9834.755367] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9834.755433] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9834.755466] [2:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work was

cancelled
<4>[ 9834.755649] [0: system_server: 4318]
_D3_INFORM to dongle
<4>[ 9834.757639] I[0:
swapper/0:
0]
<4>[ 9834.757673] I[0:
swapper/0:
0]
Received D3 ACK
<4>[ 9834.758088] [0: system_server: 4318]
0x00000008
<4>[ 9834.758453] [0: system_server: 4318]
_D0_INFORM_IN_USE to dongle
<4>[ 9834.758823] [0: system_server: 4318]
<6>[ 9834.759293] [0: system_server: 4318]
43e914e4
<6>[ 9834.759460] [0: system_server: 4318]
100146
<6>[ 9834.759652] [0: system_server: 4318]
2800003
<6>[ 9834.759857] [0: system_server: 4318]
10
<6>[ 9834.760064] [0: system_server: 4318]
1c200004
<6>[ 9834.760270] [0: system_server: 4318]
0
<6>[ 9834.760477] [0: system_server: 4318]
1c400004
<6>[ 9834.760573] [2:MHI_STATE_THREA: 4605]
<6>[ 9834.760598] [1: kworker/u16:6:32449]
r, timer was active
<6>[ 9834.760682] [0: system_server: 4318]
0
<6>[ 9834.760822] [1: kworker/u16:6:32449]
mpletion.
<6>[ 9834.760889] [0: system_server: 4318]
0
<6>[ 9834.761094] [0: system_server: 4318]
0
<6>[ 9834.761300] [0: system_server: 4318]
0
<6>[ 9834.761506] [0: system_server: 4318]
77414e4
<6>[ 9834.761711] [0: system_server: 4318]
0
<6>[ 9834.761918] [0: system_server: 4318]
48
<6>[ 9834.762122] [0: system_server: 4318]
0
<6>[ 9834.762329] [0: system_server: 4318]
1ed
<6>[ 9834.762534] [0: system_server: 4318]
2c10
<6>[ 9834.762742] [0: system_server: 4318]
142
<6>[ 9834.762771] [0: system_server: 4318]
0
<6>[ 9834.762798] [0: system_server: 4318]
0
<6>[ 9834.762949] [0: system_server: 4318]
: 400
<6>[ 9834.763155] [0: system_server: 4318]
: 1

dhdpcie_send_mb_data: send H2D_HOST


D2H_MB_DATA: 0x00000001
dhdpcie_handle_mb_data D2H_MB_DATA:
dhdpcie_send_mb_data: H2D_MB_DATA:
dhdpcie_send_mb_data: send H2D_HOST
dhdpcie_suspend_dev: Enter
pcieh 0001:01:00.0: reg offset: 0:
pcieh 0001:01:00.0: reg offset: 4:
pcieh 0001:01:00.0: reg offset: 8:
pcieh 0001:01:00.0: reg offset: 12:
pcieh 0001:01:00.0: reg offset: 16:
pcieh 0001:01:00.0: reg offset: 20:
pcieh 0001:01:00.0: reg offset: 24:
[process_M0_transition] Exited
[mhi_initiate_m3] Cancelled M1 time
pcieh 0001:01:00.0: reg offset: 28:
[mhi_initiate_m3] Waiting for M3 co
pcieh 0001:01:00.0: reg offset: 32:
pcieh 0001:01:00.0: reg offset: 36:
pcieh 0001:01:00.0: reg offset: 40:
pcieh 0001:01:00.0: reg offset: 44:
pcieh 0001:01:00.0: reg offset: 48:
pcieh 0001:01:00.0: reg offset: 52:
pcieh 0001:01:00.0: reg offset: 56:
pcieh 0001:01:00.0: reg offset: 60:
pcieh 0001:01:00.0: PCI_EXP_DEVCTL:
pcieh 0001:01:00.0: PCI_EXP_LNKCTL:
pcieh 0001:01:00.0: PCI_EXP_SLTCTL:
pcieh 0001:01:00.0: PCI_EXP_RTCTL:
pcieh 0001:01:00.0: PCI_EXP_DEVCTL2
pcieh 0001:01:00.0: PCI_EXP_LNKCTL2

<6>[ 9834.763183] [0: system_server: 4318]


: 0
<6>[ 9834.765849] [0: system_server: 4318]
device_vendor_id reg : 43e914e4
<6>[ 9834.766074] [0: system_server: 4318]
PMCSR reg value: 4108
<6>[ 9834.766268] [0: system_server: 4318]
PMCSR reg value: 410b
<6>[ 9834.766441] [0: system_server: 4318]
device_vendor_id reg : 43e914e4
<6>[ 9834.774276] [0: MHI_EV_THREAD: 4604]
ceived ring 0x0
<6>[ 9834.774347] [2:MHI_STATE_THREA: 4605]
ng to 5
<6>[ 9834.774380] [2:MHI_STATE_THREA: 4605]
M3 state transition
<6>[ 9834.774447] [1: kworker/u16:6:32449]
eived
<6>[ 9834.774492] [1: kworker/u16:6:32449]
<6>[ 9834.779652] [0: system_server: 4318]
eg : 410b dev->current_state : 0
<6>[ 9834.779826] [0: system_server: 4318]
vendor_id reg : 43e914e4
<6>[ 9834.779886] [0: system_server: 4318]
0: a575144d
<6>[ 9834.779922] [0: system_server: 4318]
4: 100147
<6>[ 9834.779957] [0: system_server: 4318]
8: 6040001
<6>[ 9834.780123] [0: system_server: 4318]
12: 10010
<6>[ 9834.780158] [0: system_server: 4318]
16: 0
<6>[ 9834.780192] [0: system_server: 4318]
20: 0
<6>[ 9834.780228] [0: system_server: 4318]
24: 10100
<6>[ 9834.780263] [0: system_server: 4318]
28: 0
<6>[ 9834.780299] [0: system_server: 4318]
32: 1ff01c00
<6>[ 9834.780463] [0: system_server: 4318]
36: 0
<6>[ 9834.780498] [0: system_server: 4318]
40: 0
<6>[ 9834.780534] [0: system_server: 4318]
44: 0
<6>[ 9834.780568] [0: system_server: 4318]
48: 0
<6>[ 9834.780603] [0: system_server: 4318]
52: 40
<6>[ 9834.780639] [0: system_server: 4318]
56: 0
<6>[ 9834.780804] [0: system_server: 4318]
60: 101ed
<6>[ 9834.780840] [0: system_server: 4318]
TL: 2010
<6>[ 9834.780876] [0: system_server: 4318]
TL: 42
<6>[ 9834.780903] [0: system_server: 4318]

pcieh 0001:01:00.0: PCI_EXP_SLTCTL2


pcieh 0001:01:00.0: [debug] step 1,
pcieh 0001:01:00.0: [debug] step 2,
pcieh 0001:01:00.0: [debug] step 3,
pcieh 0001:01:00.0: [debug] step 4,
[mhi_process_event_ring] MHI STE re
[process_stt_work_item] Transitioni
[process_M3_transition] Processing
[mhi_initiate_m3] M3 completion rec
[mhi_turn_off_pcie_link] Entered...
pcieh 0001:01:00.0: [debug] pmcsr r
pcieh 0001:01:00.0: [debug] device_
pcieport 0001:00:00.0: reg offset:
pcieport 0001:00:00.0: reg offset:
pcieport 0001:00:00.0: reg offset:
pcieport 0001:00:00.0: reg offset:
pcieport 0001:00:00.0: reg offset:
pcieport 0001:00:00.0: reg offset:
pcieport 0001:00:00.0: reg offset:
pcieport 0001:00:00.0: reg offset:
pcieport 0001:00:00.0: reg offset:
pcieport 0001:00:00.0: reg offset:
pcieport 0001:00:00.0: reg offset:
pcieport 0001:00:00.0: reg offset:
pcieport 0001:00:00.0: reg offset:
pcieport 0001:00:00.0: reg offset:
pcieport 0001:00:00.0: reg offset:
pcieport 0001:00:00.0: reg offset:
pcieport 0001:00:00.0: PCI_EXP_DEVC
pcieport 0001:00:00.0: PCI_EXP_LNKC
pcieport 0001:00:00.0: PCI_EXP_SLTC

TL: 0
<6>[ 9834.780937] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_RTCT
L: 0
<6>[ 9834.780971] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL2: 400
<6>[ 9834.781141] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL2: 1
<6>[ 9834.781168] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL2: 0
<6>[ 9834.781342] [0: system_server: 4318] exynos-pcie 15660000.pcie1: ack mes
sage is ok
<6>[ 9834.781372] [0: system_server: 4318] exynos-pcie 15660000.pcie1: receive
d Enter_L23_READY DLLP packet
<6>[ 9834.781411] [0: system_server: 4318] exynos-pcie 15660000.pcie1: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[ 9834.781562] [0: system_server: 4318] exynos-pcie 15660000.pcie1: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[ 9834.786067] [1: kworker/u16:6:32449] mhi 0000:01:00.0: [debug] pmcsr reg
: b dev->current_state : 0
<6>[ 9834.786193] [1: kworker/u16:6:32449] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9834.786283] [1: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: ack mes
sage is ok
<6>[ 9834.786313] [1: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: receive
d Enter_L23_READY DLLP packet
<6>[ 9834.786350] [1: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[ 9834.786476] [1: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[ 9834.786791] [0: system_server: 4318] voltage(793750) + volt_offset(37500
) is bigger than max_volt(793750)
<6>[ 9834.786840] [0: system_server: 4318] voltage(793750) + volt_offset(37500
) is bigger than max_volt(793750)
<6>[ 9834.788087] [0: system_server: 4318] DEVFREQ(MIF): suspend voltage(79375
0 793750)
<6>[ 9834.790884] [0: system_server: 4318] s2m_rtc_update: RTC_UPDATE_REGISTER
check : 0x00
<6>[ 9834.791096] [0: system_server: 4318] s2m-rtc s2m-rtc: s2m_rtc_read_time:
2016-11-17 16:15:53(0x10)PM
<5>[ 9834.791504] [0: system_server: 4318] sd 0:0:0:0: [sda] Synchronizing SCS
I cache
<6>[ 9834.797241] [0: system_server: 4318] s2m_rtc_update: RTC_UPDATE_REGISTER
check : 0x00
<6>[ 9834.797451] [0: system_server: 4318] s2m-rtc s2m-rtc: s2m_rtc_read_time:
2016-11-17 16:15:53(0x10)PM
<6>[ 9834.798771] [0: system_server: 4318] s2m_rtc_update: RTC_UPDATE_REGISTER
check : 0x00
<6>[ 9834.798974] [0: system_server: 4318] s2m-rtc s2m-rtc: s2m_rtc_read_time:
2016-11-17 16:15:53(0x10)PM
<6>[ 9834.799015] [0: system_server: 4318] s2m-rtc s2m-rtc: s2m_rtc_set_alarm:
2016-11-17 16:16:06(0x10)PM
<6>[ 9834.800423] [0: system_server: 4318] s2m_rtc_update: RTC_UPDATE_REGISTER
check : 0x00
<6>[ 9834.801800] [0: system_server: 4318] s2m_rtc_update: RTC_UPDATE_REGISTER
check : 0x00
<6>[ 9834.802408] [0: system_server: 4318] max86900_pm_suspend
<6>[ 9834.802883] [0: system_server: 4318] wake enabled for irq 7
<2>[ 9834.803057] [0: system_server: 4318] --------Si47xx i2c driver Si47xx_su
spend called
<2>[ 9834.803081] [0: system_server: 4318] Si47xx_suspend: device not supporte

d
<6>[ 9834.803133] [0: system_server: 4318] [VIB] max77843_haptic_suspend
<6>[ 9834.803160] [0: system_server: 4318] [VIB] max77843_haptic_i2c 0
<6>[ 9834.804257] [0: system_server: 4318] wake enabled for irq 4
<6>[ 9834.804455] [0: system_server: 4318] vfsspi_regulator_onoff: ocp off, sm
c ret = 0
<6>[ 9834.804478] [0: system_server: 4318] vfsspi_regulator_onoff: off
<6>[ 9834.804515] [0: system_server: 4318] vfsspi_pm_suspend
<6>[ 9834.804591] [0: system_server: 4318] [SSP] ssp_suspend:
<6>[ 9834.811261] [0: system_server: 4318] [SSP] ssp_send_cmd: command 0xd4 0
<6>[ 9834.811554] [0: system_server: 4318] mst_ldo_device_suspend
<6>[ 9834.811626] [0: system_server: 4318] MST_LDO_DRV]]] suspend
<6>[ 9834.811644] [0: system_server: 4318] MST_LDO_DRV]]] suspend success afte
r smc : 122f122
<6>[ 9834.816525] [1: kworker/u16:6:32449] [mhi_turn_off_pcie_link] Exited...
<6>[ 9834.850549] [0: system_server: 4318] [MAX98505_DEBUG] max98505_suspend:
enter
<6>[ 9834.850687] [0: system_server: 4318] pacific-audio sound.34: pacific_sus
pend_post : set AIF1 port slave
<6>[ 9834.850778] [0: system_server: 4318] wake enabled for irq 577
<6>[ 9834.850806] [0: system_server: 4318] wake enabled for irq 580
<4>[ 9834.850847] [0: system_server: 4318] certify_hall_suspend start
<4>[ 9834.850875] [0: system_server: 4318] [keys] certify_hall_suspend certify
_status : 0 (detach)
<4>[ 9834.850910] [0: system_server: 4318] hall_suspend start
<4>[ 9834.850935] [0: system_server: 4318] [keys] hall_suspend flip_status : 1
(open)
<6>[ 9834.864353] [0: system_server: 4318] [MIF] usb_phy_prepare_shutdown
<6>[ 9834.864388] [0: system_server: 4318] dev rdy val = 1
<6>[ 9834.864411] [0: system_server: 4318] set_host_stat:set host port power s
tatus to [0]
<6>[ 9834.894398] [0: system_server: 4318] wait_dev_pwr_stat:[PWR OFF]...
<6>[ 9834.902895] I[0: system_server: 4318] mdm_device_ready_irq_handler, irq:
host ready val : 00000000
<6>[ 9834.902920] I[0: system_server: 4318] mdm_device_ready_irq_handler, irq:
dev ready val : 00000000
<6>[ 9834.924380] [0: system_server: 4318] done
<7>[ 9834.924444] [0: system_server: 4318] samsung-usb2phy 15530000.usb2phy: s
amsung_usb2phy_shutdown: End of setting for shutdown
<6>[ 9834.924767] [0: system_server: 4318] spi suspend is handled in device su
spend, dma mode = 0, bus_num = 3
<6>[ 9834.924805] [0: system_server: 4318] spi suspend is handled in device su
spend, dma mode = 0, bus_num = 1
<6>[ 9834.924960] [0: system_server: 4318] 3s3c24xx_serial_shutdown: port=4 res
et
<6>[ 9834.926330] [0: system_server: 4318] PM: suspend of devices complete aft
er 176.327 msecs
<6>[ 9834.926357] [0: system_server: 4318] ---Enabled regulators--<6>[ 9834.926398] [0: system_server: 4318] LDO1: 1200000uV, 0xffffffea mode, n
ull
<6>[ 9834.928657] [0: system_server: 4318] VDDIO_1.8V_COMP: 1800000uV, 0xfffff
fea mode, null
<6>[ 9834.929686] [0: system_server: 4318] VDDD_RET_1.0V_COMP: 700000uV, 0xfff
fffea mode, null
<6>[ 9834.931820] [0: system_server: 4318] VDD20_1P8_AP: 1800000uV, 0xffffffea
mode, null
<6>[ 9834.932535] [0: system_server: 4318] VCC_1.8V_CODEC_PMIC: 1800000uV, 0xf
fffffea mode, spi0.0-DBVDD1, spi0.0-AVDD, regulator.47-SUPPLY
<6>[ 9834.934407] [0: system_server: 4318] regulator-dummy: -22uV, 0xffffffea
mode, null

<6>[ 9834.934434] [0: system_server: 4318] Always On regulator count :10 [VDD2
2_1P1_2MIC][vdd_ldo8][vdd_mldo][vdd_lldo][vdd_disp_cam0][vdd_int][vdd_apollo][vd
d_atlas][vdd_mif][safeout1_range]
<6>[ 9834.934459] [0: system_server: 4318] ---Enabled regulator count: 16--<6>[ 9834.936755] [0: system_server: 4318] PM: late suspend of devices complet
e after 2.263 msecs
<6>[ 9834.937912] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
0: ffffffff
<6>[ 9834.937944] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
4: ffffffff
<6>[ 9834.937973] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
8: ffffffff
<6>[ 9834.938003] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
12: ffffffff
<6>[ 9834.938031] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
16: ffffffff
<6>[ 9834.938060] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
20: ffffffff
<6>[ 9834.938088] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
24: ffffffff
<6>[ 9834.938117] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
28: ffffffff
<6>[ 9834.938145] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
32: ffffffff
<6>[ 9834.938175] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
36: ffffffff
<6>[ 9834.938203] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
40: ffffffff
<6>[ 9834.938232] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
44: ffffffff
<6>[ 9834.938260] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
48: ffffffff
<6>[ 9834.938289] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
52: ffffffff
<6>[ 9834.938317] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
56: ffffffff
<6>[ 9834.938346] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
60: ffffffff
<6>[ 9834.938375] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL: 0
<6>[ 9834.938403] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL: 0
<6>[ 9834.938430] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL: 0
<6>[ 9834.938458] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_RTCT
L: 0
<6>[ 9834.938486] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL2: 0
<6>[ 9834.938512] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL2: 0
<6>[ 9834.938539] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL2: 0
<6>[ 9834.939834] [0: system_server: 4318] exynos-pcie 15660000.pcie1: RC1 alr
eady off
<6>[ 9834.939870] [0: system_server: 4318] exynos-pcie 10ee0000.pcie0: RC0 alr
eady off
<6>[ 9834.940061] [0: system_server: 4318] spi suspend is handled in suspend_n
oirq, dma mode = 1, bus_num = 4
<6>[ 9834.940100] [0: system_server: 4318] spi suspend is handled in suspend_n
oirq, dma mode = 1, bus_num = 0

<6>[ 9834.940398] [0: system_server: 4318] PM: noirq suspend of devices comple
te after 3.607 msecs
<4>[ 9834.940423] [0: system_server: 4318] Disabling non-boot CPUs ...
<6>[ 9834.940847] [0: system_server: 4318] MobiCore mcd: <- core_num=0x0000000
0, active_cpu=0x00000001
<6>[ 9834.940954] [1:
mc_fastcall: 1747] MobiCore mcd: CoreSwap ok 1 -> 0
<4>[ 9834.942089] [1:
migration/1: 13] IRQ149 no longer affine to CPU1
<5>[ 9834.943675] [2: system_server: 4318] CPU1: shutdown
<4>[ 9834.945690] [2:
migration/2: 18] IRQ150 no longer affine to CPU2
<5>[ 9834.947218] [3: system_server: 4318] CPU2: shutdown
<4>[ 9834.949260] [3:
migration/3: 23] IRQ151 no longer affine to CPU3
<5>[ 9834.950764] [0: system_server: 4318] CPU3: shutdown
<4>[ 9834.952659] [4:
migration/4: 28] IRQ152 no longer affine to CPU4
<5>[ 9834.953432] [0: system_server: 4318] CPU4: shutdown
<6>[ 9834.954822] [0: system_server: 4318] [MIF] 1552000Khz
<6>[ 9834.954822] [0: system_server: 4318] WAKEUP_STAT: 0x80000001
<6>[ 9834.954822] [0: system_server: 4318] EINT_PEND: 0x00, 0x40 0x00, 0x80
<6>[ 9834.954822] [0: system_server: 4318] Resume caused by IRQ 7, sec-pmic-ir
q
<6>[ 9834.954822] [0: system_server: 4318] Suspended for 0.000 seconds
<6>[ 9834.954971] [0: system_server: 4318] Enabling non-boot CPUs ...
<4>[ 9834.955124] [1:
swapper/1:
0] CPU1: Booted secondary processor
<6>[ 9834.955689] [0: system_server: 4318] MobiCore mcd: <- core_num=0x0000000
1, active_cpu=0x00000000
<6>[ 9834.955738] [0:
mc_fastcall: 1747] MobiCore mcd: CoreSwap ok 0 -> 1
<6>[ 9834.955776] [0: system_server: 4318] CPU1 is up
<4>[ 9834.955901] [2:
swapper/2:
0] CPU2: Booted secondary processor
<6>[ 9834.956377] [0: system_server: 4318] CPU2 is up
<4>[ 9834.956498] [3:
swapper/3:
0] CPU3: Booted secondary processor
<6>[ 9834.956995] [0: system_server: 4318] CPU3 is up
<4>[ 9834.957196] [4:
swapper/4:
0] CPU4: Booted secondary processor
<6>[ 9834.957878] [0: system_server: 4318] CPU4 is up
<6>[ 9834.958080] [0: system_server: 4318] spi resume is handled in resume_noi
rq, dma mode = 1, bus_num = 0
<6>[ 9834.958139] [0: system_server: 4318] spi resume is handled in resume_noi
rq, dma mode = 1, bus_num = 4
<6>[ 9834.972567] [1: system_server: 4318] pcieport 0001:00:00.0: [debug] pmcs
r reg : ffff dev->current_state : 3
<6>[ 9834.972580] [1: system_server: 4318] pcieport 0001:00:00.0: [debug] devi
ce_vendor_id reg : ffffffff
<6>[ 9834.972592] [1: system_server: 4318] pcieport 0001:00:00.0: Refused to c
hange power state, currently in D3, PCI_PM_CTRL=ffff
<6>[ 9834.972605] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL: 0
<6>[ 9834.972615] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL: 0
<6>[ 9834.972624] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL: 0
<6>[ 9834.972633] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_RTCT
L: 0
<6>[ 9834.972643] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL2: 0
<6>[ 9834.972653] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL2: 0
<6>[ 9834.972661] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL2: 0
<6>[ 9834.972673] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x3c (was 0xffffffff, writing 0xffffffff)
<6>[ 9834.972686] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x38 (was 0xffffffff, writing 0xffffffff)

<6>[ 9834.972696] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co


nfig space at offset 0x34 (was 0xffffffff, writing 0xffffffff)
<6>[ 9834.972707] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x30 (was 0xffffffff, writing 0xffffffff)
<6>[ 9834.972718] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x2c (was 0xffffffff, writing 0xffffffff)
<6>[ 9834.972729] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x28 (was 0xffffffff, writing 0xffffffff)
<6>[ 9834.972739] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x24 (was 0xffffffff, writing 0xffffffff)
<6>[ 9834.972750] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x20 (was 0xffffffff, writing 0xffffffff)
<6>[ 9834.972761] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x1c (was 0xffffffff, writing 0xffffffff)
<6>[ 9834.972772] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x18 (was 0xffffffff, writing 0xffffffff)
<6>[ 9834.972783] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x14 (was 0xffffffff, writing 0xffffffff)
<6>[ 9834.972794] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x10 (was 0xffffffff, writing 0xffffffff)
<6>[ 9834.972805] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0xc (was 0xffffffff, writing 0xffffffff)
<6>[ 9834.972816] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x8 (was 0xffffffff, writing 0xffffffff)
<6>[ 9834.972826] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x4 (was 0xffffffff, writing 0xffffffff)
<6>[ 9834.972838] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x0 (was 0xffffffff, writing 0xffffffff)
<6>[ 9834.972861] [1: system_server: 4318] pcieh 0001:01:00.0: [debug] step 1,
device_vendor_id reg : ffffffff
<6>[ 9834.972871] [1: system_server: 4318] pcieh 0001:01:00.0: [debug] step 2,
PMCSR reg value: ffff
<6>[ 9834.972881] [1: system_server: 4318] pcieh 0001:01:00.0: [debug] step 3,
PMCSR reg value: 0
<6>[ 9834.972890] [1: system_server: 4318] pcieh 0001:01:00.0: [debug] step 4,
device_vendor_id reg : ffffffff
<6>[ 9834.985865] [1: system_server: 4318] pcieh 0001:01:00.0: [debug] pmcsr r
eg : ffff dev->current_state : 3
<6>[ 9834.985876] [1: system_server: 4318] pcieh 0001:01:00.0: [debug] device_
vendor_id reg : ffffffff
<6>[ 9834.985886] [1: system_server: 4318] pcieh 0001:01:00.0: Refused to chan
ge power state, currently in D3, PCI_PM_CTRL=ffff
<6>[ 9834.985899] [1: system_server: 4318] exynos-pcie 15660000.pcie1: PCIE li
nk state is 0
<6>[ 9834.985910] [1: system_server: 4318] pcieh 0001:01:00.0: [debug] setp 5,
PMCSR reg value: ffff
<6>[ 9834.985920] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_DEVCTL:
2c10
<6>[ 9834.985930] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_LNKCTL:
142
<6>[ 9834.985939] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_SLTCTL:
0
<6>[ 9834.985948] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_RTCTL:
0
<6>[ 9834.985958] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_DEVCTL2
: 400
<6>[ 9834.985968] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_LNKCTL2
: 1
<6>[ 9834.985977] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_SLTCTL2
: 0

<6>[ 9834.985988] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi


g space at offset 0x3c (was 0xffffffff, writing 0x1ed)
<6>[ 9834.985999] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x38 (was 0xffffffff, writing 0x0)
<6>[ 9834.986010] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x34 (was 0xffffffff, writing 0x48)
<6>[ 9834.986022] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x30 (was 0xffffffff, writing 0x0)
<6>[ 9834.986032] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x2c (was 0xffffffff, writing 0x77414e4)
<6>[ 9834.986044] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x28 (was 0xffffffff, writing 0x0)
<6>[ 9834.986054] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x24 (was 0xffffffff, writing 0x0)
<6>[ 9835.016023] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x20 (was 0xffffffff, writing 0x0)
<6>[ 9835.045992] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x1c (was 0xffffffff, writing 0x0)
<6>[ 9835.075962] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x18 (was 0xffffffff, writing 0x1c400004)
<6>[ 9835.105931] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x14 (was 0xffffffff, writing 0x0)
<6>[ 9835.135900] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x10 (was 0xffffffff, writing 0x1c200004)
<6>[ 9835.165870] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0xc (was 0xffffffff, writing 0x10)
<6>[ 9835.165882] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x8 (was 0xffffffff, writing 0x2800003)
<6>[ 9835.165893] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x4 (was 0xffffffff, writing 0x100146)
<6>[ 9835.165904] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x0 (was 0xffffffff, writing 0x43e914e4)
<6>[ 9835.179205] [1: system_server: 4318] pcieport 0000:00:00.0: [debug] pmcs
r reg : ffff dev->current_state : 3
<6>[ 9835.179216] [1: system_server: 4318] pcieport 0000:00:00.0: [debug] devi
ce_vendor_id reg : ffffffff
<6>[ 9835.179227] [1: system_server: 4318] pcieport 0000:00:00.0: Refused to c
hange power state, currently in D3, PCI_PM_CTRL=ffff
<6>[ 9835.192529] [1: system_server: 4318] mhi 0000:01:00.0: [debug] pmcsr reg
: ffff dev->current_state : 3
<6>[ 9835.192540] [1: system_server: 4318] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : ffffffff
<6>[ 9835.192551] [1: system_server: 4318] mhi 0000:01:00.0: Refused to change
power state, currently in D3, PCI_PM_CTRL=ffff
<6>[ 9835.192671] [1: system_server: 4318] PM: noirq resume of devices complet
e after 234.779 msecs
<6>[ 9835.193117] [1: system_server: 4318] exynos-mailbox 11240000.mailbox: Lo
ading APM firmware ...
<6>[ 9835.193283] [1: system_server: 4318] OK
<6>[ 9835.194386] [1: system_server: 4318] PM: early resume of devices complet
e after 1.375 msecs
<6>[ 9835.194649] [0: kworker/u16:9:32452] [mhi_resume] [mhi_resume]
<6>[ 9835.194665] [0: kworker/u16:9:32452] [mhi_initiate_m0] Entered MHI state
5, Pending M0 0 Pending M3 0
<6>[ 9835.194677] [0: kworker/u16:9:32452] [mhi_initiate_m0] Waiting for M0 M1
or M3. Currently 5...
<6>[ 9835.194687] [0: kworker/u16:9:32452] [mhi_initiate_m0] Wait complete sta
te: 5
<6>[ 9835.194697] [0: kworker/u16:9:32452] [mhi_turn_on_pcie_link] Entered...
<6>[ 9835.194712] [0: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: exynos_

pcie_poweron, start of poweron, pcie state: 0


<6>[ 9835.194862] [1: system_server: 4318] s3c2410_wdt: watchdog enabled
<6>[ 9835.198334] [1: system_server: 4318] spi resume is handled in device res
ume, dma mode = 0, bus_num = 1
<6>[ 9835.198370] [1: system_server: 4318] spi resume is handled in device res
ume, dma mode = 0, bus_num = 3
<7>[ 9835.198605] [1: system_server: 4318] samsung-usb2phy 15530000.usb2phy: C
an't configure specified phy mode
<7>[ 9835.198624] [1: system_server: 4318] samsung-usb2phy 15530000.usb2phy: e
nd of samsung_usb2phy_init
<7>[ 9835.198638] [1: system_server: 4318] samsung-usb2phy 15530000.usb2phy: s
amsung_usb2phy_runtime_resume
<4>[ 9835.198660] [1: system_server: 4318] usb usb1: root hub lost power or wa
s reset
<7>[ 9835.198682] [1: system_server: 4318] s5p-ehci 15510000.usb: reset comman
d 0080b02 park=3 ithresh=8 period=1024 Reset HALT
<6>[ 9835.198699] [1: system_server: 4318] dev rdy val = 0
<6>[ 9835.198707] [1: system_server: 4318] set_host_stat:set host port power s
tatus to [1]
<6>[ 9835.198719] [1: system_server: 4318] wait_dev_pwr_stat:[PWR ON]...
<6>[ 9835.220091] I[0:
swapper/0:
0] mdm_device_ready_irq_handler, irq:
host ready val : 00000001
<6>[ 9835.220100] I[0:
swapper/0:
0] mdm_device_ready_irq_handler, irq:
dev ready val : 00000001
<6>[ 9835.228681] [1: system_server: 4318] done
<7>[ 9835.228717] [3: kworker/u16:8:32451] usb usb1: usb resume
<7>[ 9835.228731] [3: kworker/u16:8:32451] s5p-ehci 15510000.usb: resume root
hub after power loss
<7>[ 9835.228743] [3: kworker/u16:8:32451] s5p-ehci 15510000.usb: LRESET 0
<7>[ 9835.228766] [3: kworker/u16:8:32451] hub 1-0:1.0: hub_reset_resume
<7>[ 9835.228777] [3: kworker/u16:8:32451] hub 1-0:1.0: enabling power on all
ports
<6>[ 9835.232885] [0: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: D state
: 0, f8c000
<6>[ 9835.245174] [1: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: exynos_
pcie_reset: Link up : 0x03ce8e11
<6>[ 9835.245407] [1: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, end of poweron, pcie state: 3
<6>[ 9835.256078] [1: kworker/u16:9:32452] mhi 0000:01:00.0: [debug] pmcsr reg
: 8 dev->current_state : 3
<6>[ 9835.256259] [1: kworker/u16:9:32452] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9835.256271] [1: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: Recover
y for the link of RC0
<6>[ 9835.256281] [1: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: Recover
config space of RC0 and its EP
<6>[ 9835.256290] [1: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: Recover
RC0
<6>[ 9835.256319] [1: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: Recover
EP of RC0
<6>[ 9835.256710] [1: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: Refresh
ing the saved config space in PCI framework for RC0 and its EP
<7>[ 9835.259237] [3: kworker/u16:8:32451] s5p-ehci 15510000.usb: GetStatus po
rt:2 status 001803 0 ACK POWER sig=j CSC CONNECT
<7>[ 9835.259251] [3: kworker/u16:8:32451] hub 1-0:1.0: port 2: status 0501 ch
ange 0001
<7>[ 9835.259315] [2: kworker/u16:16:32537] usb 1-2: finish reset-resume
<6>[ 9835.261923] [1: kworker/u16:9:32452] [mhi_turn_on_pcie_link] Exited...
<6>[ 9835.261936] [1: kworker/u16:9:32452] [mhi_initiate_m0] Setting M0 ...
<6>[ 9835.262085] [1: kworker/u16:9:32452] [mhi_initiate_m0] Exited...

<6>[ 9835.266667] [0: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring


DB state 5 link 1, ring type 2, index 0 db 0x5fa26750
<6>[ 9835.266681] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9835.266712] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9835.266725] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9835.266736] [2:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9835.267216] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9835.267225] [1: kworker/u16:9:32452] [mhi_resume] Wait complete state: 2
<4>[ 9835.271787] [0: system_server: 4318] ufs_get_device_info: UNIQUE NUMBER
= 02157df271b5cb31 , LT: 0x22
<6>[ 9835.275490] [0: system_server: 4318] exynos-ufs 15570000.ufs: Power mode
change(0): M(1)G(2)L(2)HS-series(2)
<4>[ 9835.275855] [0: system_server: 4318] hall_resume start
<4>[ 9835.275868] [0: system_server: 4318] [keys] hall_resume flip_status : 1
(open)
<4>[ 9835.275883] [0: system_server: 4318] certify_hall_resume start
<4>[ 9835.275892] [0: system_server: 4318] [keys] certify_hall_resume certify_
status : 0 (detach)
<6>[ 9835.275910] [0: system_server: 4318] wake disabled for irq 577
<6>[ 9835.275920] [0: system_server: 4318] wake disabled for irq 580
<6>[ 9835.276048] [0:
kworker/0:0:13589] [MAX98505_DEBUG] max98505_resume: e
nter
<6>[ 9835.279266] [1: system_server: 4318] mst_ldo_device_resume
<6>[ 9835.279303] [1: system_server: 4318] MST_LDO_DRV]]] resume
<6>[ 9835.279309] [1: system_server: 4318] MST_LDO_DRV]]] resume success after
smc : 122f122
<6>[ 9835.282574] [3: system_server: 4318] [SSP] ssp_resume:
<6>[ 9835.288789] [3: system_server: 4318] [SSP] ssp_send_cmd: command 0xd3 0
<3>[ 9835.288820] [3: system_server: 4318] vfsspi_wakeup_daemon send signal fa
iled by wakeup(0)
<6>[ 9835.288851] [3: system_server: 4318] vfsspi_regulator_onoff: ocp on, smc
ret = 0
<6>[ 9835.291904] [3: system_server: 4318] vfsspi_regulator_onoff: on
<6>[ 9835.291918] [3: system_server: 4318] vfsspi_pm_resume
<6>[ 9835.291969] [3: system_server: 4318] wake disabled for irq 4
<6>[ 9835.292004] [3: system_server: 4318] [VIB] max77843_haptic_resume
<2>[ 9835.292019] [3: system_server: 4318] Si47xx_resume: device not supported
<6>[ 9835.292038] [3: system_server: 4318] wake disabled for irq 7
<6>[ 9835.292241] [1:irq/7-sec-pmic-: 794] s2m-rtc s2m-rtc: s2m_rtc_alarm_irq:
irq(550)
<6>[ 9835.292250] [3: system_server: 4318] max86900_pm_resume
<6>[ 9835.293478] [1:
kworker/1:3:17119] s2m_rtc_update: RTC_UPDATE_REGISTER
check : 0x00
<6>[ 9835.293607] [1:
kworker/1:3:17119] s2m-rtc s2m-rtc: s2m_rtc_read_time:
2016-11-17 16:16:06(0x10)PM
<6>[ 9835.294861] [3: system_server: 4318] s2m_rtc_update: RTC_UPDATE_REGISTER
check : 0x00
<6>[ 9835.294996] [3: system_server: 4318] s2m-rtc s2m-rtc: s2m_rtc_read_time:
2016-11-17 16:16:06(0x10)PM
<6>[ 9835.299582] [3: system_server: 4318] exynos-pcie 15660000.pcie1: exynos_
pcie_poweron, start of poweron, pcie state: 0
<7>[ 9835.312655] [2: kworker/u16:16:32537] s5p-ehci 15510000.usb: port 2 reset
complete, port enabled
<7>[ 9835.312682] [2: kworker/u16:16:32537] s5p-ehci 15510000.usb: GetStatus po
rt:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
<6>[ 9835.320451] [3: system_server: 4318] exynos-pcie 15660000.pcie1: D state
: 0, dede00

<6>[ 9835.321755] [3: system_server: 4318] exynos-pcie 15660000.pcie1: exynos_


pcie_reset: Link up : 0x0339c511
<6>[ 9835.321937] [3: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL: 2010
<6>[ 9835.321954] [3: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL: 42
<6>[ 9835.321965] [3: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL: 0
<6>[ 9835.321981] [3: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_RTCT
L: 0
<6>[ 9835.321998] [3: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL2: 400
<6>[ 9835.322013] [3: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL2: 1
<6>[ 9835.322023] [3: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL2: 0
<6>[ 9835.322044] [3: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x3c (was 0x1ff, writing 0x101ed)
<6>[ 9835.322068] [3: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x38 (was 0x0, writing 0x0)
<6>[ 9835.322085] [3: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x34 (was 0x40, writing 0x40)
<6>[ 9835.322238] [3: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x30 (was 0x0, writing 0x0)
<6>[ 9835.322255] [3: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x2c (was 0x0, writing 0x0)
<6>[ 9835.322271] [3: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x28 (was 0x0, writing 0x0)
<6>[ 9835.322287] [3: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x24 (was 0x0, writing 0x0)
<6>[ 9835.322304] [3: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x20 (was 0x1ff01c00, writing 0x1ff01c00)
<6>[ 9835.322322] [3: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x1c (was 0x0, writing 0x0)
<6>[ 9835.322338] [3: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x18 (was 0x10100, writing 0x10100)
<6>[ 9835.322356] [3: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x14 (was 0x0, writing 0x0)
<6>[ 9835.322373] [3: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x10 (was 0x0, writing 0x0)
<6>[ 9835.322390] [3: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0xc (was 0x10000, writing 0x10010)
<6>[ 9835.322413] [3: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x8 (was 0x1, writing 0x6040001)
<6>[ 9835.322436] [3: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x4 (was 0x100107, writing 0x100147)
<6>[ 9835.322458] [3: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x0 (was 0xa575144d, writing 0xa575144d)
<6>[ 9835.322686] [3: system_server: 4318] exynos-pcie 15660000.pcie1: exynos_
pcie_poweron, end of poweron, pcie state: 3
<4>[ 9835.322704] [3: system_server: 4318] dhdpcie_resume_dev: Enter
<6>[ 9835.322847] [3: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_DEVCTL:
2c10
<6>[ 9835.323224] [3: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_LNKCTL:
142
<6>[ 9835.323234] [3: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_SLTCTL:
0
<6>[ 9835.323244] [3: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_RTCTL:
0
<6>[ 9835.323621] [3: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_DEVCTL2

: 400
<6>[ 9835.323998] [3: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_LNKCTL2
: 1
<6>[ 9835.324008] [3: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_SLTCTL2
: 0
<6>[ 9835.324387] [3: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x3c (was 0x100, writing 0x1ed)
<6>[ 9835.324859] [3: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x38 (was 0x0, writing 0x0)
<6>[ 9835.324962] [3: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x34 (was 0x48, writing 0x48)
<6>[ 9835.325340] [3: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x30 (was 0x0, writing 0x0)
<6>[ 9835.325719] [3: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x2c (was 0x77414e4, writing 0x77414e4)
<6>[ 9835.325973] [2: kworker/u16:16:32537] usb 1-2: reset high-speed USB devic
e number 2 using s5p-ehci
<6>[ 9835.326117] [3: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x28 (was 0x0, writing 0x0)
<6>[ 9835.326496] [3: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x24 (was 0x0, writing 0x0)
<6>[ 9835.326874] [3: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x20 (was 0x0, writing 0x0)
<6>[ 9835.327252] [3: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x1c (was 0x0, writing 0x0)
<6>[ 9835.327631] [3: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x18 (was 0x4, writing 0x1c400004)
<6>[ 9835.328102] [3: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x18 (writing 0x1c400004)
<6>[ 9835.328205] [3: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x14 (was 0x0, writing 0x0)
<6>[ 9835.328309] [3: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x10 (was 0x4, writing 0x1c200004)
<6>[ 9835.328503] [3: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x10 (writing 0x1c200004)
<6>[ 9835.328606] [3: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0xc (was 0x0, writing 0x10)
<6>[ 9835.328801] [3: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x8 (was 0x2800003, writing 0x2800003)
<6>[ 9835.328904] [3: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x4 (was 0x100000, writing 0x100146)
<6>[ 9835.329099] [3: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x0 (was 0x43e914e4, writing 0x43e914e4)
<4>[ 9835.330570] [3: system_server: 4318] dhdpcie_send_mb_data: H2D_MB_DATA:
0x00000010
<4>[ 9835.330603] [3: system_server: 4318] dhdpcie_send_mb_data: send H2D_HOST
_D0_INFORM to dongle
<7>[ 9835.347307] [0: kworker/u16:16:32537] usb 1-2: USB quirks for this device
: 100
<6>[ 9835.351550] [0: kworker/u16:16:32537] [CHKRA:5]>
<6>[ 9835.351905] I[0: kworker/u16:28:32552] [NACB:5]<
<6>[ 9835.351916] I[0: kworker/u16:28:32552] notification_available_cb: set lpa
handling to false
<6>[ 9835.351937] I[0: kworker/u16:28:32552] [CHKRA:5]>
<6>[ 9835.352066] [1: system_server: 4318] PM: resume of devices complete afte
r 157.663 msecs
<7>[ 9835.356181] [0:
kworker/0:0:13589] max77843_fg_write_temp: temperature
to (255, 0x1980)
<6>[ 9835.356609] [0:
kworker/0:0:13589] max77843_fg_check_qrtable: QRTABLE2
0_REG(0x1603), QRTABLE30_REG(0x1005)

<7>[ 9835.357757]
<6>[ 9835.358084]
changed
<6>[ 9835.358107]
Tbat:255)
<6>[ 9835.358265]
sleep_mode = 0
<6>[ 9835.358301]

[1: system_server: 4318] PM: Finishing wakeup.


[0:
kworker/0:0:13589] power_supply battery: power_supply_
[0:

kworker/0:0:13589] Skip monitor work(36, Vnow:4104mV,

[0:

kworker/0:0:13589] sec_bat_get_property cable type = 1

[0:

kworker/0:0:13589] sec_bat_get_property cable type = 1

<7>[ 9835.358855] [0:


khubd: 742] hub 1-0:1.0: state 7 ports 2 chg 00
04 evt 0000
<6>[ 9835.358923] [0:
khubd: 742] hub 1-0:1.0: port 2, status 0503, c
hange 0000, 480 Mb/s
<6>[ 9835.359015] [0:
kworker/0:0:13589] exynos-dwc3 15400000.usb: dwc3_exyn
os_runtime_suspend
<3>[ 9835.362348] [2:
mdm_helper: 3355] esoc REQ enginer waiting on request
<4>[ 9835.357774] [1:onic.tuiservice: 659] Restarting tasks ...
t-base-tui module: ioctl 0x80047402 <6>[ 9835.362948] [1:onic.tuiservice: 659]
TUI_IO_WAITCMD
<4>[ 9835.363158] [1: system_server: 4318] done.
<6>[ 9835.364767] [0: thread_hotplug:14056] frequency info : 1200000, prev_cmd
1, exe_cmd 4
<6>[ 9835.364791] [0: thread_hotplug:14056] lcd is on : 0, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9835.364804] [0: thread_hotplug:14056] cluster1 cores hotplug out : 0
<6>[ 9835.365472] [3:
healthd: 3346] sec_bat_get_property cable type = 1
sleep_mode = 0
<12>[ 9835.366159] [3:
healthd: 3346] healthd: battery l=99 v=4104 t=25.
5 h=2 st=3 c=0 o=1 ca=-320 ct=0 ps=0 chg= 2016-11-17 16:16:06.686709604 UTC
<12>[ 9835.366209] [3:
healthd: 3346] healthd: battery l=99 v=4104 t=25.
5 h=2 st=3 c=0 o=1 ca=-320 ct=0 ps=0 chg= 2016-11-17 16:16:06.686709604 UTC hv=0
sec=0 chg=
<14>[ 9835.366236] [3:
healthd: 3346] healthd-android: healthd_mode_andr
oid_battery_update
<14>[ 9835.366261] [3:
healthd: 3346] BatteryPropertiesRegistrar: notify
Listeners : start
<14>[ 9835.366287] [3:
healthd: 3346] IBatteryPropertiesListener : batte
ryPropertiesChanged!
<14>[ 9835.366287] [3:
healthd: 3346] : BatteryPropertiesRegistrar: noti
fyListeners : done
<6>[ 9835.369292] [1: system_server: 4318] mdm_hsic_pm_notify_event: unblock r
equest
<6>[ 9835.369326] [1: system_server: 4318] request_active_lock_set
<6>[ 9835.369505] [1: system_server: 4318] PM: suspend exit 2016-11-17 16:16:0
6.690132604 UTC
<6>[ 9835.389569] [1: kworker/u16:28:32552] mdm_hsic_rpm_check
<6>[ 9835.389599] [1: kworker/u16:28:32552] mdm_hsic_rpm_restart
<6>[ 9835.411173] [3:
Binder_5: 5307] [SSP] batch 5: delay 180000000, tim
eout 0, flag 0, ret 0
<6>[ 9835.412180] [3:
Binder_5: 5307] [SSP] set_sensors_enable: new_enabl
e = 8224, old_enable = 8192
<6>[ 9835.412202] [3:
Binder_5: 5307] [SSP] enable_sensor: add 32, New =
180000000ns
<6>[ 9835.412223] [3:
Binder_5: 5307] [SSP] send_instruction: Inst = 0xa1
, Sensor Type = 0x5, data = 180
<6>[ 9835.418902] [3:
Binder_5: 5307] [SSP] enable_sensor: delay 180, tim
eout 0, flag=0, ret1
<6>[ 9835.478616] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9835.478764] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni

ng to 3
<6>[ 9835.478787] [2:MHI_STATE_THREA: 4605]
M1 state transition from state 3
<6>[ 9835.478812] [2:MHI_STATE_THREA: 4605]
ansition to M2
<6>[ 9835.479013] [2:MHI_STATE_THREA: 4605]
deferred work
<6>[ 9835.611472] [2: irq/15-SSP_Int: 1775]
<6>[ 9835.611472] [2: irq/15-SSP_Int: 1775]
<6>[ 9835.611472] [2: irq/15-SSP_Int: 1775]
<6>[ 9835.611472] [2: irq/15-SSP_Int: 1775]
<6>[ 9835.611472] [2: irq/15-SSP_Int: 1775]
<6>[ 9835.611472] [2: irq/15-SSP_Int: 1775]
<6>[ 9835.611472] [2: irq/15-SSP_Int: 1775]
<6>[ 9835.611472] [2: irq/15-SSP_Int: 1775]
<6>[ 9835.611472] [2: irq/15-SSP_Int: 1775]
<6>[ 9835.611472] [2: irq/15-SSP_Int: 1775]
<6>[ 9835.613894] [2:
Binder_8: 5655]
e = 8192, old_enable = 8224
<6>[ 9835.613927] [2:
Binder_8: 5655]
sor = 32, current state = 8192
<6>[ 9835.613952] [2:
Binder_8: 5655]
, Sensor Type = 0x5, data = 180
<6>[ 9835.683839] [1:
bgcompact:14060]
r)
<6>[ 9835.865424] [1:
kworker/1:3:17119]
=> (set_volt: 625000, get_volt: 625000)
<6>[ 9835.866217] [1:
kworker/1:3:17119]
volt: 650000, get_volt: 650000)
<6>[ 9835.867281] [1:
kworker/1:3:17119]
=> 650000
<6>[ 9835.867330] [1:
kworker/1:3:17119]
emp : 30
<7>[ 9835.871977] [0:
kworker/0:0:13589]
<7>[ 9835.884065] [0:
kworker/0:0:13589]
<7>[ 9835.884155] [0:
kworker/0:0:13589]
1
<7>[ 9835.884195] [0:
kworker/0:0:13589]
hub
<3>[ 9835.885314] [0:
kworker/0:0:13589]
time_suspend
<7>[ 9835.896002] [0:
kworker/0:0:13589]
amsung_usb2phy_runtime_suspend
<6>[ 9835.896080] [0:
kworker/0:0:13589]
<6>[ 9835.896132] [0:
kworker/0:0:13589]
child=0
<6>[ 9835.896478] [1: system_server: 4318]
07.217098657 UTC
<6>[ 9835.896519] [0: system_server: 4318]
<7>[ 9835.913063] [0: system_server: 4318]
<6>[ 9835.913343] [2: system_server: 4318]
ynamic_hotplug CMD_SLEEP_PREPARE
<6>[ 9835.913399] [2: system_server: 4318]
leep_prepare_cpus : 5
<6>[ 9835.913610] [0: thread_hotplug:14056]
<6>[ 9835.922991] [2: system_server: 4318]
> (set_volt: 675000, get_volt: 675000)
<6>[ 9835.923687] [2: system_server: 4318]
=> (set_volt: 687500, get_volt: 687500)
<6>[ 9835.924495] [2: system_server: 4318]

[process_M1_transition] Processing
[process_M1_transition] Allowing tr
[process_M1_transition] Starting M3
[SSP] [M] #>LIGC
save
save bak od
AR-0,39,85,8160,-1,20,0,0
AR-0,8,88,8173,-1,20,0,0
Add 5
batch rate = 220 180 0 0
save bak odr 5, 1, 60, 60, 40
save bak odr 5, 0, 180, 180, 20
AD 5 1 0 1, 60
[SSP] set_sensors_enable: new_enabl
[SSP] ssp_remove_sensor: remove sen
[SSP] send_instruction: Inst = 0xa2
compact_memory done.(31 times so fa
MIF(543000): unset TMU_COLD: 662500
DISP(100000): unset TMU_COLD: (set_
INT(100000): unset TMU_COLD: 687500
tmu temperature state 1 to 0, cur_t
usb 1-2: usb auto-suspend, wakeup 1
hub 1-0:1.0: hub_suspend
usb usb1: bus auto-suspend, wakeup
s5p-ehci 15510000.usb: suspend root
s5p-ehci 15510000.usb: s5p_ehci_run
samsung-usb2phy 15530000.usb2phy: s
request_active_lock_release
s5p_ehci_runtime_suspend: usage=0,
PM: suspend entry 2016-11-17 16:16:
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
exynos_dm_hotplug_notifier, 958 : d
nr_sleep_prepare_cpus : 4, tmp_nr_s
stopped thread_hotplug
MIF(635000): set TMU_COLD: 637500 =
DISP(100000): set TMU_COLD: 650000
INT(100000): set TMU_COLD: 650000 =

> 687500
<6>[ 9835.924517] [2: system_server: 4318]
<6>[ 9835.924544] [2: system_server: 4318]
uest
<3>[ 9835.925951] [0:
mdm_helper: 3355]
<4>[ 9835.925493] [2: system_server: 4318]
elapsed 0.005 seconds) done.
<4>[ 9835.930996] [2: system_server: 4318]
... (elapsed 0.005 seconds) done.
<7>[ 9835.936810] [2: system_server: 4318]
<4>[ 9835.936829] [2: system_server: 4318]
le_suspend to debug)
<6>[ 9835.938112] [2: system_server: 4318]
os_runtime_resume
<6>[ 9835.939607] [0: kworker/u16:10:32454]
<6>[ 9835.939633] [0: kworker/u16:10:32454]
MHI state 4
<4>[ 9835.939647] [2: system_server: 4318]
0x00000001
<6>[ 9835.939660] [0: kworker/u16:10:32454]
4, Pending M0 0 Pending M3 0
<6>[ 9835.939674] [0: kworker/u16:10:32454]
ut of M2
<4>[ 9835.943880] [2: system_server: 4318]
_D3_INFORM to dongle
<4>[ 9835.946188] I[0:
swapper/0:
0]
<4>[ 9835.946205] I[0:
swapper/0:
0]
Received D3 ACK
<4>[ 9835.946566] [0: system_server: 4318]
0x00000008
<4>[ 9835.946591] [0: system_server: 4318]
_D0_INFORM_IN_USE to dongle
<4>[ 9835.946614] [0: system_server: 4318]
<6>[ 9835.946855] [0: system_server: 4318]
43e914e4
<6>[ 9835.947057] [0: system_server: 4318]
100146
<6>[ 9835.947263] [0: system_server: 4318]
2800003
<6>[ 9835.947471] [0: system_server: 4318]
10
<6>[ 9835.947678] [0: system_server: 4318]
1c200004
<6>[ 9835.947884] [0: system_server: 4318]
0
<6>[ 9835.948091] [0: system_server: 4318]
1c400004
<6>[ 9835.948299] [0: system_server: 4318]
0
<6>[ 9835.948505] [0: system_server: 4318]
0
<6>[ 9835.948714] [0: system_server: 4318]
0
<6>[ 9835.948921] [0: system_server: 4318]
0
<6>[ 9835.949128] [0: system_server: 4318]
77414e4
<6>[ 9835.949386] [0: system_server: 4318]
0
<6>[ 9835.949542] [0: system_server: 4318]

tmu temperature state 0 to 1


mdm_hsic_pm_notify_event: block req
esoc REQ engine released from wait
Freezing user space processes ... (
Freezing remaining freezable tasks
PM: Entering mem sleep
Suspending console(s) (use no_conso
exynos-dwc3 15400000.usb: dwc3_exyn
[mhi_suspend] [mhi_suspend]
[mhi_suspend] Entered, sys state 2,
dhdpcie_send_mb_data: H2D_MB_DATA:
[mhi_initiate_m3] Entered MHI state
[mhi_initiate_m3] Triggering wake o
dhdpcie_send_mb_data: send H2D_HOST
D2H_MB_DATA: 0x00000001
dhdpcie_handle_mb_data D2H_MB_DATA:
dhdpcie_send_mb_data: H2D_MB_DATA:
dhdpcie_send_mb_data: send H2D_HOST
dhdpcie_suspend_dev: Enter
pcieh 0001:01:00.0: reg offset: 0:
pcieh 0001:01:00.0: reg offset: 4:
pcieh 0001:01:00.0: reg offset: 8:
pcieh 0001:01:00.0: reg offset: 12:
pcieh 0001:01:00.0: reg offset: 16:
pcieh 0001:01:00.0: reg offset: 20:
pcieh 0001:01:00.0: reg offset: 24:
pcieh 0001:01:00.0: reg offset: 28:
pcieh 0001:01:00.0: reg offset: 32:
pcieh 0001:01:00.0: reg offset: 36:
pcieh 0001:01:00.0: reg offset: 40:
pcieh 0001:01:00.0: reg offset: 44:
pcieh 0001:01:00.0: reg offset: 48:
pcieh 0001:01:00.0: reg offset: 52:

48
<6>[ 9835.949747] [0: system_server: 4318] pcieh 0001:01:00.0: reg offset: 56:
0
<6>[ 9835.949955] [0: system_server: 4318] pcieh 0001:01:00.0: reg offset: 60:
1ed
<6>[ 9835.950159] [0: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_DEVCTL:
2c10
<6>[ 9835.950421] [1: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26770
<6>[ 9835.950443] [1: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9835.950511] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9835.950523] [0: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_LNKCTL:
142
<6>[ 9835.950535] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9835.950545] [0: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_SLTCTL:
0
<6>[ 9835.950555] [2:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work was
cancelled
<6>[ 9835.950565] [0: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_RTCTL:
0
<6>[ 9835.950941] [0: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_DEVCTL2
: 400
<6>[ 9835.951234] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9835.951247] [3: kworker/u16:10:32454] [mhi_initiate_m3] Cancelled M1 time
r, timer was active
<6>[ 9835.951317] [0: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_LNKCTL2
: 1
<6>[ 9835.951329] [0: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_SLTCTL2
: 0
<6>[ 9835.951412] [3: kworker/u16:10:32454] [mhi_initiate_m3] Waiting for M3 co
mpletion.
<6>[ 9835.954196] [0: system_server: 4318] pcieh 0001:01:00.0: [debug] step 1,
device_vendor_id reg : 43e914e4
<6>[ 9835.954400] [0: system_server: 4318] pcieh 0001:01:00.0: [debug] step 2,
PMCSR reg value: 4108
<6>[ 9835.954608] [0: system_server: 4318] pcieh 0001:01:00.0: [debug] step 3,
PMCSR reg value: 410b
<6>[ 9835.954777] [0: system_server: 4318] pcieh 0001:01:00.0: [debug] step 4,
device_vendor_id reg : 43e914e4
<6>[ 9835.960605] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9835.960643] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 5
<6>[ 9835.960658] [2:MHI_STATE_THREA: 4605] [process_M3_transition] Processing
M3 state transition
<6>[ 9835.960694] [3: kworker/u16:10:32454] [mhi_initiate_m3] M3 completion rec
eived
<6>[ 9835.960716] [3: kworker/u16:10:32454] [mhi_turn_off_pcie_link] Entered...
<6>[ 9835.966248] [0: system_server: 4318] pcieh 0001:01:00.0: [debug] pmcsr r
eg : 410b dev->current_state : 0
<6>[ 9835.966421] [0: system_server: 4318] pcieh 0001:01:00.0: [debug] device_
vendor_id reg : 43e914e4
<6>[ 9835.966457] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
0: a575144d
<6>[ 9835.966475] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
4: 100147
<6>[ 9835.966493] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
8: 6040001

<6>[ 9835.966511] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:


12: 10010
<6>[ 9835.966529] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
16: 0
<6>[ 9835.966547] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
20: 0
<6>[ 9835.966565] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
24: 10100
<6>[ 9835.966583] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
28: 0
<6>[ 9835.966602] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
32: 1ff01c00
<6>[ 9835.966620] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
36: 0
<6>[ 9835.966637] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
40: 0
<6>[ 9835.966656] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
44: 0
<6>[ 9835.966673] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
48: 0
<6>[ 9835.966691] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
52: 40
<6>[ 9835.966709] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
56: 0
<6>[ 9835.966727] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
60: 101ed
<6>[ 9835.966899] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL: 2010
<6>[ 9835.966917] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL: 42
<6>[ 9835.966929] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL: 0
<6>[ 9835.966946] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_RTCT
L: 0
<6>[ 9835.966964] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL2: 400
<6>[ 9835.966982] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL2: 1
<6>[ 9835.966995] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL2: 0
<6>[ 9835.967106] [0: system_server: 4318] exynos-pcie 15660000.pcie1: ack mes
sage is ok
<6>[ 9835.967121] [0: system_server: 4318] exynos-pcie 15660000.pcie1: receive
d Enter_L23_READY DLLP packet
<6>[ 9835.967141] [0: system_server: 4318] exynos-pcie 15660000.pcie1: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[ 9835.967245] [0: system_server: 4318] exynos-pcie 15660000.pcie1: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[ 9835.969548] [0: system_server: 4318] voltage(793750) + volt_offset(37500
) is bigger than max_volt(793750)
<6>[ 9835.969585] [0: system_server: 4318] voltage(793750) + volt_offset(37500
) is bigger than max_volt(793750)
<6>[ 9835.970688] [0: system_server: 4318] DEVFREQ(MIF): suspend voltage(79375
0 793750)
<6>[ 9835.972660] [3: kworker/u16:10:32454] mhi 0000:01:00.0: [debug] pmcsr reg
: b dev->current_state : 0
<6>[ 9835.972742] [0: system_server: 4318] s2m_rtc_update: RTC_UPDATE_REGISTER
check : 0x00
<6>[ 9835.972754] [3: kworker/u16:10:32454] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb

<6>[ 9835.972821] [3: kworker/u16:10:32454] exynos-pcie 10ee0000.pcie0: ack mes


sage is ok
<6>[ 9835.972835] [3: kworker/u16:10:32454] exynos-pcie 10ee0000.pcie0: receive
d Enter_L23_READY DLLP packet
<6>[ 9835.972854] [3: kworker/u16:10:32454] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[ 9835.972900] [0: system_server: 4318] s2m-rtc s2m-rtc: s2m_rtc_read_time:
2016-11-17 16:16:07(0x10)PM
<6>[ 9835.972932] [3: kworker/u16:10:32454] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<5>[ 9835.973139] [0: system_server: 4318] sd 0:0:0:0: [sda] Synchronizing SCS
I cache
<6>[ 9835.978196] [0: system_server: 4318] s2m_rtc_update: RTC_UPDATE_REGISTER
check : 0x00
<6>[ 9835.978342] [0: system_server: 4318] s2m-rtc s2m-rtc: s2m_rtc_read_time:
2016-11-17 16:16:07(0x10)PM
<6>[ 9835.979543] [0: system_server: 4318] s2m_rtc_update: RTC_UPDATE_REGISTER
check : 0x00
<6>[ 9835.979678] [0: system_server: 4318] s2m-rtc s2m-rtc: s2m_rtc_read_time:
2016-11-17 16:16:07(0x10)PM
<6>[ 9835.979698] [0: system_server: 4318] s2m-rtc s2m-rtc: s2m_rtc_set_alarm:
2016-11-17 16:17:35(0x10)PM
<6>[ 9835.980984] [0: system_server: 4318] s2m_rtc_update: RTC_UPDATE_REGISTER
check : 0x00
<6>[ 9835.982265] [0: system_server: 4318] s2m_rtc_update: RTC_UPDATE_REGISTER
check : 0x00
<6>[ 9835.982707] [0: system_server: 4318] max86900_pm_suspend
<6>[ 9835.982922] [0: system_server: 4318] wake enabled for irq 7
<2>[ 9835.983043] [0: system_server: 4318] --------Si47xx i2c driver Si47xx_su
spend called
<2>[ 9835.983053] [0: system_server: 4318] Si47xx_suspend: device not supporte
d
<6>[ 9835.983082] [0: system_server: 4318] [VIB] max77843_haptic_suspend
<6>[ 9835.983095] [0: system_server: 4318] [VIB] max77843_haptic_i2c 0
<6>[ 9835.983972] [0: system_server: 4318] wake enabled for irq 4
<6>[ 9835.984077] [0: system_server: 4318] vfsspi_regulator_onoff: ocp off, sm
c ret = 0
<6>[ 9835.984087] [0: system_server: 4318] vfsspi_regulator_onoff: off
<6>[ 9835.984107] [0: system_server: 4318] vfsspi_pm_suspend
<6>[ 9835.984151] [0: system_server: 4318] [SSP] ssp_suspend:
<6>[ 9835.990612] [0: system_server: 4318] [SSP] ssp_send_cmd: command 0xd4 0
<6>[ 9835.990781] [0: system_server: 4318] mst_ldo_device_suspend
<6>[ 9835.990832] [0: system_server: 4318] MST_LDO_DRV]]] suspend
<6>[ 9835.990840] [0: system_server: 4318] MST_LDO_DRV]]] suspend success afte
r smc : 122f122
<6>[ 9836.002902] [3: kworker/u16:10:32454] [mhi_turn_off_pcie_link] Exited...
<6>[ 9836.017633] [0: system_server: 4318] [MAX98505_DEBUG] max98505_suspend:
enter
<6>[ 9836.017720] [0: system_server: 4318] pacific-audio sound.34: pacific_sus
pend_post : set AIF1 port slave
<6>[ 9836.017776] [0: system_server: 4318] wake enabled for irq 577
<6>[ 9836.017790] [0: system_server: 4318] wake enabled for irq 580
<4>[ 9836.017812] [0: system_server: 4318] certify_hall_suspend start
<4>[ 9836.017826] [0: system_server: 4318] [keys] certify_hall_suspend certify
_status : 0 (detach)
<4>[ 9836.017845] [0: system_server: 4318] hall_suspend start
<4>[ 9836.017857] [0: system_server: 4318] [keys] hall_suspend flip_status : 1
(open)
<6>[ 9836.031939] [0: system_server: 4318] [MIF] usb_phy_prepare_shutdown
<6>[ 9836.031958] [0: system_server: 4318] dev rdy val = 1

<6>[ 9836.031968] [0: system_server: 4318] set_host_stat:set host port power s


tatus to [0]
<6>[ 9836.061939] [0: system_server: 4318] wait_dev_pwr_stat:[PWR OFF]...
<6>[ 9836.070853] I[0: system_server: 4318] mdm_device_ready_irq_handler, irq:
host ready val : 00000000
<6>[ 9836.070865] I[0: system_server: 4318] mdm_device_ready_irq_handler, irq:
dev ready val : 00000000
<6>[ 9836.091906] [0: system_server: 4318] done
<7>[ 9836.091944] [0: system_server: 4318] samsung-usb2phy 15530000.usb2phy: s
amsung_usb2phy_shutdown: End of setting for shutdown
<6>[ 9836.092152] [0: system_server: 4318] spi suspend is handled in device su
spend, dma mode = 0, bus_num = 3
<6>[ 9836.092170] [0: system_server: 4318] spi suspend is handled in device su
spend, dma mode = 0, bus_num = 1
<6>[ 9836.092262] [0: system_server: 4318] 3s3c24xx_serial_shutdown: port=4 res
et
<6>[ 9836.093181] [0: system_server: 4318] PM: suspend of devices complete aft
er 154.023 msecs
<6>[ 9836.093195] [0: system_server: 4318] ---Enabled regulators--<6>[ 9836.093218] [0: system_server: 4318] LDO1: 1200000uV, 0xffffffea mode, n
ull
<6>[ 9836.095045] [0: system_server: 4318] VDDIO_1.8V_COMP: 1800000uV, 0xfffff
fea mode, null
<6>[ 9836.095872] [0: system_server: 4318] VDDD_RET_1.0V_COMP: 700000uV, 0xfff
fffea mode, null
<6>[ 9836.097647] [0: system_server: 4318] VDD20_1P8_AP: 1800000uV, 0xffffffea
mode, null
<6>[ 9836.098251] [0: system_server: 4318] VCC_1.8V_CODEC_PMIC: 1800000uV, 0xf
fffffea mode, spi0.0-DBVDD1, spi0.0-AVDD, regulator.47-SUPPLY
<6>[ 9836.099838] [0: system_server: 4318] regulator-dummy: -22uV, 0xffffffea
mode, null
<6>[ 9836.099850] [0: system_server: 4318] Always On regulator count :10 [VDD2
2_1P1_2MIC][vdd_ldo8][vdd_mldo][vdd_lldo][vdd_disp_cam0][vdd_int][vdd_apollo][vd
d_atlas][vdd_mif][safeout1_range]
<6>[ 9836.099861] [0: system_server: 4318] ---Enabled regulator count: 16--<6>[ 9836.101329] [0: system_server: 4318] PM: late suspend of devices complet
e after 1.452 msecs
<6>[ 9836.102057] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
0: ffffffff
<6>[ 9836.102072] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
4: ffffffff
<6>[ 9836.102086] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
8: ffffffff
<6>[ 9836.102099] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
12: ffffffff
<6>[ 9836.102112] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
16: ffffffff
<6>[ 9836.102125] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
20: ffffffff
<6>[ 9836.102138] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
24: ffffffff
<6>[ 9836.102150] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
28: ffffffff
<6>[ 9836.102163] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
32: ffffffff
<6>[ 9836.102176] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
36: ffffffff
<6>[ 9836.102188] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
40: ffffffff
<6>[ 9836.102201] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:

44: ffffffff
<6>[ 9836.102214] [0: system_server:
48: ffffffff
<6>[ 9836.102226] [0: system_server:
52: ffffffff
<6>[ 9836.102239] [0: system_server:
56: ffffffff
<6>[ 9836.102252] [0: system_server:
60: ffffffff
<6>[ 9836.102265] [0: system_server:
TL: 0
<6>[ 9836.102278] [0: system_server:
TL: 0
<6>[ 9836.102291] [0: system_server:
TL: 0
<6>[ 9836.102303] [0: system_server:
L: 0
<6>[ 9836.102315] [0: system_server:
TL2: 0
<6>[ 9836.102328] [0: system_server:
TL2: 0
<6>[ 9836.102339] [0: system_server:
TL2: 0
<6>[ 9836.103188] [0: system_server:
eady off
<6>[ 9836.103205] [0: system_server:
eady off
<6>[ 9836.103318] [0: system_server:
oirq, dma mode = 1, bus_num = 4
<6>[ 9836.103338] [0: system_server:
oirq, dma mode = 1, bus_num = 0
<6>[ 9836.103541] [0: system_server:
te after 2.196 msecs
<4>[ 9836.103554] [0: system_server:
<6>[ 9836.103819] [0: system_server:
0, active_cpu=0x00000001
<6>[ 9836.103882] [1:
mc_fastcall:
<4>[ 9836.104483] [1:
migration/1:
<5>[ 9836.105440] [2: system_server:
<5>[ 9836.107820] [0: system_server:
<5>[ 9836.110100] [0: system_server:
<5>[ 9836.112025] [0: system_server:
<6>[ 9836.112677] [0: system_server:
<6>[ 9836.112677] [0: system_server:
<6>[ 9836.112677] [0: system_server:
<6>[ 9836.112677] [0: system_server:
: KEY_HOMEPAGE
<6>[ 9836.112677] [0: system_server:
<6>[ 9836.112802] I[0: system_server:
172
<6>[ 9836.112835] [0: system_server:
<4>[ 9836.112990] [1:
swapper/1:
<6>[ 9836.113577] [0: system_server:
1, active_cpu=0x00000000
<6>[ 9836.113628] [0:
mc_fastcall:
<6>[ 9836.113667] [0: system_server:
<4>[ 9836.113796] [2:
swapper/2:
<6>[ 9836.114301] [0: system_server:
<4>[ 9836.114422] [3:
swapper/3:
<6>[ 9836.114918] [0: system_server:

4318] pcieport 0001:00:00.0: reg offset:


4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
4318] pcieport 0001:00:00.0: PCI_EXP_RTCT
4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
4318] exynos-pcie 15660000.pcie1: RC1 alr
4318] exynos-pcie 10ee0000.pcie0: RC0 alr
4318] spi suspend is handled in suspend_n
4318] spi suspend is handled in suspend_n
4318] PM: noirq suspend of devices comple
4318] Disabling non-boot CPUs ...
4318] MobiCore mcd: <- core_num=0x0000000
1747]
13]
4318]
4318]
4318]
4318]
4318]
4318]
4318]
4318]

MobiCore mcd: CoreSwap ok 1 -> 0


IRQ149 no longer affine to CPU1
CPU1: shutdown
CPU2: shutdown
CPU3: shutdown
CPU4: shutdown
[MIF] 1552000Khz
WAKEUP_STAT: 0x80000001
EINT_PEND: 0x20, 0x40 0x00, 0x00
Resume caused by IRQ 580, gpio-keys

4318] Suspended for 0.000 seconds


4318] gpio_keys_gpio_isr before resume by
4318] Enabling non-boot CPUs ...
0] CPU1: Booted secondary processor
4318] MobiCore mcd: <- core_num=0x0000000
1747]
4318]
0]
4318]
0]
4318]

MobiCore mcd: CoreSwap ok 0 -> 1


CPU1 is up
CPU2: Booted secondary processor
CPU2 is up
CPU3: Booted secondary processor
CPU3 is up

<4>[ 9836.115120] [4:


swapper/4:
0] CPU4: Booted secondary processor
<6>[ 9836.115765] [0: system_server: 4318] CPU4 is up
<6>[ 9836.116007] [0: system_server: 4318] spi resume is handled in resume_noi
rq, dma mode = 1, bus_num = 0
<6>[ 9836.116067] [0: system_server: 4318] spi resume is handled in resume_noi
rq, dma mode = 1, bus_num = 4
<6>[ 9836.122523] [0: kworker/0:2H:23569] HOME key is pressed
<6>[ 9836.129185] [0: system_server: 4318] pcieport 0001:00:00.0: [debug] pmcs
r reg : ffff dev->current_state : 3
<6>[ 9836.129198] [0: system_server: 4318] pcieport 0001:00:00.0: [debug] devi
ce_vendor_id reg : ffffffff
<6>[ 9836.129212] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL: 0
<6>[ 9836.129222] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL: 0
<6>[ 9836.129231] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL: 0
<6>[ 9836.129241] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_RTCT
L: 0
<6>[ 9836.129251] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL2: 0
<6>[ 9836.129261] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL2: 0
<6>[ 9836.129270] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL2: 0
<6>[ 9836.129282] [0: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x3c (was 0xffffffff, writing 0xffffffff)
<6>[ 9836.129294] [0: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x38 (was 0xffffffff, writing 0xffffffff)
<6>[ 9836.129305] [0: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x34 (was 0xffffffff, writing 0xffffffff)
<6>[ 9836.129316] [0: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x30 (was 0xffffffff, writing 0xffffffff)
<6>[ 9836.129327] [0: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x2c (was 0xffffffff, writing 0xffffffff)
<6>[ 9836.129338] [0: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x28 (was 0xffffffff, writing 0xffffffff)
<6>[ 9836.129349] [0: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x24 (was 0xffffffff, writing 0xffffffff)
<6>[ 9836.129359] [0: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x20 (was 0xffffffff, writing 0xffffffff)
<6>[ 9836.129370] [0: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x1c (was 0xffffffff, writing 0xffffffff)
<6>[ 9836.129381] [0: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x18 (was 0xffffffff, writing 0xffffffff)
<6>[ 9836.129392] [0: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x14 (was 0xffffffff, writing 0xffffffff)
<6>[ 9836.129403] [0: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x10 (was 0xffffffff, writing 0xffffffff)
<6>[ 9836.129414] [0: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0xc (was 0xffffffff, writing 0xffffffff)
<6>[ 9836.129425] [0: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x8 (was 0xffffffff, writing 0xffffffff)
<6>[ 9836.129435] [0: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x4 (was 0xffffffff, writing 0xffffffff)
<6>[ 9836.129447] [0: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x0 (was 0xffffffff, writing 0xffffffff)
<6>[ 9836.129471] [0: system_server: 4318] pcieh 0001:01:00.0: [debug] step 1,
device_vendor_id reg : ffffffff
<6>[ 9836.129481] [0: system_server: 4318] pcieh 0001:01:00.0: [debug] step 2,

PMCSR reg value: ffff


<6>[ 9836.129491] [0: system_server: 4318] pcieh 0001:01:00.0: [debug] step 3,
PMCSR reg value: 0
<6>[ 9836.129501] [0: system_server: 4318] pcieh 0001:01:00.0: [debug] step 4,
device_vendor_id reg : ffffffff
<6>[ 9836.142508] [0: system_server: 4318] pcieh 0001:01:00.0: [debug] pmcsr r
eg : ffff dev->current_state : 3
<6>[ 9836.142520] [0: system_server: 4318] pcieh 0001:01:00.0: [debug] device_
vendor_id reg : ffffffff
<6>[ 9836.142532] [0: system_server: 4318] pcieh 0001:01:00.0: [debug] setp 5,
PMCSR reg value: ffff
<6>[ 9836.142542] [0: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_DEVCTL:
2c10
<6>[ 9836.142551] [0: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_LNKCTL:
142
<6>[ 9836.142561] [0: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_SLTCTL:
0
<6>[ 9836.142571] [0: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_RTCTL:
0
<6>[ 9836.142580] [0: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_DEVCTL2
: 400
<6>[ 9836.142589] [0: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_LNKCTL2
: 1
<6>[ 9836.142599] [0: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_SLTCTL2
: 0
<6>[ 9836.142610] [0: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x3c (was 0xffffffff, writing 0x1ed)
<6>[ 9836.142622] [0: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x38 (was 0xffffffff, writing 0x0)
<6>[ 9836.142633] [0: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x34 (was 0xffffffff, writing 0x48)
<6>[ 9836.142644] [0: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x30 (was 0xffffffff, writing 0x0)
<6>[ 9836.142656] [0: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x2c (was 0xffffffff, writing 0x77414e4)
<6>[ 9836.142667] [0: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x28 (was 0xffffffff, writing 0x0)
<6>[ 9836.142678] [0: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x24 (was 0xffffffff, writing 0x0)
<6>[ 9836.172649] [0: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x20 (was 0xffffffff, writing 0x0)
<6>[ 9836.202619] [0: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x1c (was 0xffffffff, writing 0x0)
<6>[ 9836.208527] I[0: system_server: 4318] gpio_keys_gpio_isr before resume by
172
<6>[ 9836.230510] [4: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x18 (was 0xffffffff, writing 0x1c400004)
<6>[ 9836.260483] [4: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x14 (was 0xffffffff, writing 0x0)
<6>[ 9836.290466] [4: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x10 (was 0xffffffff, writing 0x1c200004)
<6>[ 9836.320437] [4: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0xc (was 0xffffffff, writing 0x10)
<6>[ 9836.320448] [4: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x8 (was 0xffffffff, writing 0x2800003)
<6>[ 9836.320458] [4: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x4 (was 0xffffffff, writing 0x100146)
<6>[ 9836.320468] [4: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x0 (was 0xffffffff, writing 0x43e914e4)
<6>[ 9836.332511] [4: system_server: 4318] pcieport 0000:00:00.0: [debug] pmcs

r reg : ffff dev->current_state : 3


<6>[ 9836.332521] [4: system_server: 4318] pcieport 0000:00:00.0: [debug] devi
ce_vendor_id reg : ffffffff
<4>[ 9836.332528] [4: system_server: 4318] pci_raw_set_power_state: 2 callback
s suppressed
<6>[ 9836.332537] [4: system_server: 4318] pcieport 0000:00:00.0: Refused to c
hange power state, currently in D3, PCI_PM_CTRL=ffff
<6>[ 9836.345834] [4: system_server: 4318] mhi 0000:01:00.0: [debug] pmcsr reg
: ffff dev->current_state : 3
<6>[ 9836.345843] [4: system_server: 4318] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : ffffffff
<6>[ 9836.345852] [4: system_server: 4318] mhi 0000:01:00.0: Refused to change
power state, currently in D3, PCI_PM_CTRL=ffff
<6>[ 9836.345970] [4: system_server: 4318] PM: noirq resume of devices complet
e after 230.190 msecs
<6>[ 9836.346353] [4: system_server: 4318] exynos-mailbox 11240000.mailbox: Lo
ading APM firmware ...
<6>[ 9836.346514] [4: system_server: 4318] OK
<6>[ 9836.347630] [4: system_server: 4318] PM: early resume of devices complet
e after 1.385 msecs
<6>[ 9836.347750] [3: kworker/u16:29:32553] [mhi_resume] [mhi_resume]
<6>[ 9836.347767] [3: kworker/u16:29:32553] [mhi_initiate_m0] Entered MHI state
5, Pending M0 0 Pending M3 0
<6>[ 9836.347777] [3: kworker/u16:29:32553] [mhi_initiate_m0] Waiting for M0 M1
or M3. Currently 5...
<6>[ 9836.347788] [3: kworker/u16:29:32553] [mhi_initiate_m0] Wait complete sta
te: 5
<6>[ 9836.347797] [3: kworker/u16:29:32553] [mhi_turn_on_pcie_link] Entered...
<6>[ 9836.347811] [3: kworker/u16:29:32553] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, start of poweron, pcie state: 0
<6>[ 9836.347900] [4: system_server: 4318] s3c2410_wdt: watchdog enabled
<6>[ 9836.351218] [4: system_server: 4318] spi resume is handled in device res
ume, dma mode = 0, bus_num = 1
<6>[ 9836.351247] [4: system_server: 4318] spi resume is handled in device res
ume, dma mode = 0, bus_num = 3
<7>[ 9836.351459] [4: system_server: 4318] samsung-usb2phy 15530000.usb2phy: C
an't configure specified phy mode
<7>[ 9836.351477] [4: system_server: 4318] samsung-usb2phy 15530000.usb2phy: e
nd of samsung_usb2phy_init
<7>[ 9836.351488] [4: system_server: 4318] samsung-usb2phy 15530000.usb2phy: s
amsung_usb2phy_runtime_resume
<4>[ 9836.351507] [4: system_server: 4318] usb usb1: root hub lost power or wa
s reset
<7>[ 9836.351527] [4: system_server: 4318] s5p-ehci 15510000.usb: reset comman
d 0080b02 park=3 ithresh=8 period=1024 Reset HALT
<6>[ 9836.351541] [4: system_server: 4318] dev rdy val = 0
<6>[ 9836.351548] [4: system_server: 4318] set_host_stat:set host port power s
tatus to [1]
<6>[ 9836.351558] [4: system_server: 4318] wait_dev_pwr_stat:[PWR ON]...
<6>[ 9836.368639] I[0:
swapper/0:
0] mdm_device_ready_irq_handler, irq:
host ready val : 00000001
<6>[ 9836.368650] I[0:
swapper/0:
0] mdm_device_ready_irq_handler, irq:
dev ready val : 00000001
<6>[ 9836.381519] [4: system_server: 4318] done
<7>[ 9836.381559] [2: kworker/u16:1:32448] usb usb1: usb resume
<7>[ 9836.381575] [2: kworker/u16:1:32448] s5p-ehci 15510000.usb: resume root
hub after power loss
<7>[ 9836.381586] [2: kworker/u16:1:32448] s5p-ehci 15510000.usb: LRESET 0
<7>[ 9836.381610] [2: kworker/u16:1:32448] hub 1-0:1.0: hub_reset_resume
<7>[ 9836.381621] [2: kworker/u16:1:32448] hub 1-0:1.0: enabling power on all

ports
<6>[ 9836.386187] [1: kworker/u16:29:32553] exynos-pcie 10ee0000.pcie0: D state
: 0, d7d800
<6>[ 9836.398422] [1: kworker/u16:29:32553] exynos-pcie 10ee0000.pcie0: exynos_
pcie_reset: Link up : 0x03b09d11
<6>[ 9836.398647] [1: kworker/u16:29:32553] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, end of poweron, pcie state: 3
<6>[ 9836.409331] [4: kworker/u16:29:32553] mhi 0000:01:00.0: [debug] pmcsr reg
: 8 dev->current_state : 3
<6>[ 9836.409512] [4: kworker/u16:29:32553] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9836.409522] [4: kworker/u16:29:32553] exynos-pcie 10ee0000.pcie0: Recover
y for the link of RC0
<6>[ 9836.409531] [4: kworker/u16:29:32553] exynos-pcie 10ee0000.pcie0: Recover
config space of RC0 and its EP
<6>[ 9836.409539] [4: kworker/u16:29:32553] exynos-pcie 10ee0000.pcie0: Recover
RC0
<6>[ 9836.409566] [4: kworker/u16:29:32553] exynos-pcie 10ee0000.pcie0: Recover
EP of RC0
<6>[ 9836.409959] [4: kworker/u16:29:32553] exynos-pcie 10ee0000.pcie0: Refresh
ing the saved config space in PCI framework for RC0 and its EP
<7>[ 9836.412537] [2: kworker/u16:1:32448] s5p-ehci 15510000.usb: GetStatus po
rt:2 status 001803 0 ACK POWER sig=j CSC CONNECT
<7>[ 9836.412551] [2: kworker/u16:1:32448] hub 1-0:1.0: port 2: status 0501 ch
ange 0001
<7>[ 9836.412614] [1: kworker/u16:2:15392] usb 1-2: finish reset-resume
<6>[ 9836.415218] [4: kworker/u16:29:32553] [mhi_turn_on_pcie_link] Exited...
<6>[ 9836.415228] [4: kworker/u16:29:32553] [mhi_initiate_m0] Setting M0 ...
<6>[ 9836.415379] [4: kworker/u16:29:32553] [mhi_initiate_m0] Exited...
<6>[ 9836.419251] [0: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 5 link 1, ring type 2, index 0 db 0x5fa26790
<6>[ 9836.419266] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9836.419297] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9836.419309] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9836.419320] [2:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9836.419798] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9836.419814] [2: kworker/u16:29:32553] [mhi_resume] Wait complete state: 2
<4>[ 9836.429517] [4: system_server: 4318] ufs_get_device_info: UNIQUE NUMBER
= 02157df271b5cb31 , LT: 0x22
<6>[ 9836.433441] [0: system_server: 4318] exynos-ufs 15570000.ufs: Power mode
change(0): M(1)G(2)L(2)HS-series(2)
<4>[ 9836.433789] [0: system_server: 4318] hall_resume start
<4>[ 9836.433800] [0: system_server: 4318] [keys] hall_resume flip_status : 1
(open)
<4>[ 9836.433812] [0: system_server: 4318] certify_hall_resume start
<4>[ 9836.433821] [0: system_server: 4318] [keys] certify_hall_resume certify_
status : 0 (detach)
<6>[ 9836.433840] [0: system_server: 4318] wake disabled for irq 577
<6>[ 9836.433849] [0: system_server: 4318] wake disabled for irq 580
<6>[ 9836.433928] [0: system_server: 4318] mst_ldo_device_resume
<6>[ 9836.433960] [0: system_server: 4318] MST_LDO_DRV]]] resume
<6>[ 9836.433966] [0: system_server: 4318] MST_LDO_DRV]]] resume success after
smc : 122f122
<6>[ 9836.434056] [0: system_server: 4318] [SSP] ssp_resume:
<6>[ 9836.434140] [0:
kworker/0:0:13589] [MAX98505_DEBUG] max98505_resume: e
nter
<6>[ 9836.440262] [1: system_server: 4318] [SSP] ssp_send_cmd: command 0xd3 0

<6>[ 9836.440307] [1: system_server: 4318] vfsspi_wakeup_daemon send signal do


ne!
<6>[ 9836.440338] [1: system_server: 4318] vfsspi_regulator_onoff: ocp on, smc
ret = 0
<6>[ 9836.443388] [1: system_server: 4318] vfsspi_regulator_onoff: on
<6>[ 9836.443403] [1: system_server: 4318] vfsspi_pm_resume
<6>[ 9836.443449] [1: system_server: 4318] wake disabled for irq 4
<6>[ 9836.443482] [1: system_server: 4318] [VIB] max77843_haptic_resume
<2>[ 9836.443497] [1: system_server: 4318] Si47xx_resume: device not supported
<6>[ 9836.443515] [1: system_server: 4318] wake disabled for irq 7
<6>[ 9836.443710] [1: system_server: 4318] max86900_pm_resume
<6>[ 9836.445548] [1: system_server: 4318] s2m_rtc_update: RTC_UPDATE_REGISTER
check : 0x00
<6>[ 9836.445685] [1: system_server: 4318] s2m-rtc s2m-rtc: s2m_rtc_read_time:
2016-11-17 16:16:32(0x10)PM
<6>[ 9836.448316] [1: system_server: 4318] exynos-pcie 15660000.pcie1: exynos_
pcie_poweron, start of poweron, pcie state: 0
<7>[ 9836.465989] [1: kworker/u16:2:15392] s5p-ehci 15510000.usb: port 2 reset
complete, port enabled
<7>[ 9836.466013] [1: kworker/u16:2:15392] s5p-ehci 15510000.usb: GetStatus po
rt:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
<6>[ 9836.469037] [1: system_server: 4318] exynos-pcie 15660000.pcie1: D state
: 0, cf4200
<6>[ 9836.470361] [1: system_server: 4318] exynos-pcie 15660000.pcie1: exynos_
pcie_reset: Link up : 0x039f5211
<6>[ 9836.470515] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL: 2010
<6>[ 9836.470530] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL: 42
<6>[ 9836.470540] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL: 0
<6>[ 9836.470554] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_RTCT
L: 0
<6>[ 9836.470569] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL2: 400
<6>[ 9836.470584] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL2: 1
<6>[ 9836.470593] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL2: 0
<6>[ 9836.470741] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x3c (was 0x1ff, writing 0x101ed)
<6>[ 9836.470762] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x38 (was 0x0, writing 0x0)
<6>[ 9836.470778] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x34 (was 0x40, writing 0x40)
<6>[ 9836.470795] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x30 (was 0x0, writing 0x0)
<6>[ 9836.470810] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x2c (was 0x0, writing 0x0)
<6>[ 9836.470826] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x28 (was 0x0, writing 0x0)
<6>[ 9836.470841] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x24 (was 0x0, writing 0x0)
<6>[ 9836.470857] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x20 (was 0x1ff01c00, writing 0x1ff01c00)
<6>[ 9836.470873] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x1c (was 0x0, writing 0x0)
<6>[ 9836.470889] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x18 (was 0x10100, writing 0x10100)
<6>[ 9836.470906] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co

nfig space at offset 0x14 (was 0x0, writing 0x0)


<6>[ 9836.470921] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x10 (was 0x0, writing 0x0)
<6>[ 9836.470937] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0xc (was 0x10000, writing 0x10010)
<6>[ 9836.470958] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x8 (was 0x1, writing 0x6040001)
<6>[ 9836.470979] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x4 (was 0x100107, writing 0x100147)
<6>[ 9836.471000] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x0 (was 0xa575144d, writing 0xa575144d)
<6>[ 9836.471052] [1: system_server: 4318] exynos-pcie 15660000.pcie1: exynos_
pcie_poweron, end of poweron, pcie state: 3
<4>[ 9836.471064] [1: system_server: 4318] dhdpcie_resume_dev: Enter
<6>[ 9836.471198] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_DEVCTL:
2c10
<6>[ 9836.471291] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_LNKCTL:
142
<6>[ 9836.471301] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_SLTCTL:
0
<6>[ 9836.471310] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_RTCTL:
0
<6>[ 9836.471440] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_DEVCTL2
: 400
<6>[ 9836.471533] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_LNKCTL2
: 1
<6>[ 9836.471542] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_SLTCTL2
: 0
<6>[ 9836.471637] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x3c (was 0x100, writing 0x1ed)
<6>[ 9836.472096] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x38 (was 0x0, writing 0x0)
<6>[ 9836.472190] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x34 (was 0x48, writing 0x48)
<6>[ 9836.472284] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x30 (was 0x0, writing 0x0)
<6>[ 9836.472677] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x2c (was 0x77414e4, writing 0x77414e4)
<6>[ 9836.473051] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x28 (was 0x0, writing 0x0)
<6>[ 9836.473427] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x24 (was 0x0, writing 0x0)
<6>[ 9836.473801] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x20 (was 0x0, writing 0x0)
<6>[ 9836.474176] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x1c (was 0x0, writing 0x0)
<6>[ 9836.474550] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x18 (was 0x4, writing 0x1c400004)
<6>[ 9836.475009] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x18 (writing 0x1c400004)
<6>[ 9836.475103] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x14 (was 0x0, writing 0x0)
<6>[ 9836.475198] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x10 (was 0x4, writing 0x1c200004)
<6>[ 9836.475379] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x10 (writing 0x1c200004)
<6>[ 9836.475474] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0xc (was 0x0, writing 0x10)
<6>[ 9836.475651] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x8 (was 0x2800003, writing 0x2800003)

<6>[ 9836.475746] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi


g space at offset 0x4 (was 0x100000, writing 0x100146)
<6>[ 9836.476499] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x0 (was 0x43e914e4, writing 0x43e914e4)
<4>[ 9836.478053] [1: system_server: 4318] dhdpcie_send_mb_data: H2D_MB_DATA:
0x00000010
<4>[ 9836.478087] [1: system_server: 4318] dhdpcie_send_mb_data: send H2D_HOST
_D0_INFORM to dongle
<6>[ 9836.479250] [1: kworker/u16:2:15392] usb 1-2: reset high-speed USB devic
e number 2 using s5p-ehci
<7>[ 9836.497279] [0: kworker/u16:2:15392] usb 1-2: USB quirks for this device
: 100
<6>[ 9836.501477] [0: kworker/u16:2:15392] [CHKRA:5]>
<6>[ 9836.501870] [2: system_server: 4318] PM: resume of devices complete afte
r 154.227 msecs
<6>[ 9836.502747] I[0:
swapper/0:
0] [NACB:5]<
<6>[ 9836.502758] I[0:
swapper/0:
0] notification_available_cb: set lpa
handling to false
<6>[ 9836.502784] I[0:
swapper/0:
0] [CHKRA:5]>
<7>[ 9836.504802] [0:
kworker/0:0:13589] max77843_fg_write_temp: temperature
to (256, 0x1999)
<6>[ 9836.505210] [0:
kworker/0:0:13589] max77843_fg_check_qrtable: QRTABLE2
0_REG(0x1603), QRTABLE30_REG(0x1005)
<7>[ 9836.506091] [2: system_server: 4318] PM: Finishing wakeup.
<6>[ 9836.506668] [0:
kworker/0:0:13589] power_supply battery: power_supply_
changed
<6>[ 9836.506690] [0:
kworker/0:0:13589] Skip monitor work(62, Vnow:4122mV,
Tbat:256)
<6>[ 9836.506796] [0:
kworker/0:0:13589] sec_bat_get_property cable type = 1
sleep_mode = 0
<6>[ 9836.506819] [0:
kworker/0:0:13589] sec_bat_get_property cable type = 1
<7>[ 9836.506870] [3:
khubd: 742] hub 1-0:1.0: state 7 ports 2 chg 00
04 evt 0000
<6>[ 9836.506917] [3:
khubd: 742] hub 1-0:1.0: port 2, status 0503, c
hange 0000, 480 Mb/s
<3>[ 9836.509503] [0:
mdm_helper: 3355] esoc REQ enginer waiting on request
<4>[ 9836.506104] [1:onic.tuiservice: 659] Restarting tasks ...
t-base-tui module: ioctl 0x80047402 <6>[ 9836.512675] [1:onic.tuiservice: 659]
TUI_IO_WAITCMD
<4>[ 9836.513340] [3: system_server: 4318] done.
<6>[ 9836.514033] [0:
healthd: 3346] sec_bat_get_property cable type = 1
sleep_mode = 0
<12>[ 9836.514500] [0:
healthd: 3346] healthd: battery l=99 v=4122 t=25.
6 h=2 st=3 c=0 o=1 ca=-320 ct=0 ps=0 chg= 2016-11-17 16:16:32.683693187 UTC
<12>[ 9836.514537] [0:
healthd: 3346] healthd: battery l=99 v=4122 t=25.
6 h=2 st=3 c=0 o=1 ca=-320 ct=0 ps=0 chg= 2016-11-17 16:16:32.683693187 UTC hv=0
sec=0 chg=
<14>[ 9836.514564] [0:
healthd: 3346] healthd-android: healthd_mode_andr
oid_battery_update
<14>[ 9836.514588] [0:
healthd: 3346] BatteryPropertiesRegistrar: notify
Listeners : start
<14>[ 9836.514613] [0:
healthd: 3346] IBatteryPropertiesListener : batte
ryPropertiesChanged!
<14>[ 9836.514613] [0:
healthd: 3346] : BatteryPropertiesRegistrar: noti
fyListeners : done
<6>[ 9836.515370] [0:
kworker/0:0:13589] exynos-dwc3 15400000.usb: dwc3_exyn
os_runtime_suspend
<6>[ 9836.516765] [2: POSIX timer 15:14071] vfsspi_ioctl VFSSPI_IOCTL_SET_CLK
<6>[ 9836.516791] [2: POSIX timer 15:14071] vfsspi_set_clk, clk speed: 9600000

<6>[ 9836.516804] [2: POSIX timer 15:14071]


<6>[ 9836.516907] [2: POSIX timer 15:14071]
<6>[ 9836.517891] [0: thread_hotplug:14070]
0, exe_cmd 4
<6>[ 9836.517913] [0: thread_hotplug:14070]
dm_hotplug disable = 0
<6>[ 9836.517926] [0: thread_hotplug:14070]
<6>[ 9836.521881] [0: system_server: 4318]
equest
<6>[ 9836.521906] [0: system_server: 4318]
<6>[ 9836.526184] [0: system_server: 4318]
2.695421480 UTC
<6>[ 9836.534575] [4: POSIX timer 15:14071]
UP ON:1, retry: 0
<4>[ 9836.535362] [5:
swapper/5:
0]
<6>[ 9836.535444] [2: POSIX timer 15:14071]
) is bigger than max_volt(793750)
<6>[ 9836.539383] [2: kworker/u16:15:32536]
<6>[ 9836.539410] [2: kworker/u16:15:32536]
<6>[ 9836.539780] [0: surfaceflinger: 3350]
<6>[ 9836.539795] [0: surfaceflinger: 3350]
SI, 1: HDMI, 2:WB)
<4>[ 9836.539946] [6:
swapper/6:
0]
<6>[ 9836.541150] [0: POSIX timer 15:14071]
4, active_cpu=0x00000001
<6>[ 9836.541211] [1:
mc_fastcall: 1747]
<4>[ 9836.541747] [6: surfaceflinger: 3350]
ake
<6>[ 9836.541755] [6: surfaceflinger: 3350]
<6>[ 9836.542072] [0:
Binder_3:30892]
23, 48, 1, 0
<6>[ 9836.542089] [0:
Binder_3:30892]
, Sensor Type = 0x17, data = 48
<4>[ 9836.542606] [7:
swapper/7:
0]
<6>[ 9836.551405] [4:
mc_log: 3354]
ndId :1
<6>[ 9836.551413] [4:
mc_log: 3354]
: 39 : 1, 26228
<6>[ 9836.551419] [4:
mc_log: 3354]
ternal.c 395 4
<6>[ 9836.551425] [4:
mc_log: 3354]
c 129 4
<6>[ 9836.551429] [4:
mc_log: 3354]
c 164 4
<6>[ 9836.551434] [4:
mc_log: 3354]
e.c 43 4
<6>[ 9836.552851] [5:
qmuxd: 3399]
00 00 e3 02 00 6f 00 00 00 0b 00 01 08 00
<6>[ 9836.562350] [1:
qmuxd: 4756]
00 80 e3 02 02 6f 00 00 00 07 00 02 04 00
<6>[ 9836.563313] [0:
qmuxd: 3399]
00 00 03 01 00 4d 19 50 00 97 00 10 11 00
<6>[ 9836.571223] [2:
Binder_2:30887]
48, 0
<6>[ 9836.571241] [2:
Binder_2:30887]
, Sensor Type = 0x30, data = 0
<6>[ 9836.577338] [1:
qmuxd: 4756]
00 80 03 01 02 4d 19 50 00 07 00 02 04 00
<6>[ 9836.581480] [5:
mc_log: 3354]
spi_init

vfsspi_set_clk ENABLE_SPI_CLOCK
vfsspi_hardReset
frequency info : 1200000, prev_cmd
lcd is on : 0, low power mode = 0,
cluster1 cores hotplug out : 0
mdm_hsic_pm_notify_event: unblock r
request_active_lock_set
PM: suspend exit 2016-11-17 16:16:3
vfsspi_ioctl VFSSPI_IOCTL_CPU_SPEED
CPU5: Booted secondary processor
voltage(793750) + volt_offset(37500
mdm_hsic_rpm_check
mdm_hsic_rpm_restart
decon_blank ++ blank_mode : 0
decon-int UNBLANK mode: 0type (0: D
CPU6: Booted secondary processor
MobiCore mcd: <- core_num=0x0000000
MobiCore mcd: CoreSwap ok 1 -> 4
decon 13930000.decon_fb: pm_stay_aw
dsim_enable ++
[SSP] ssp_sensorhub_write(5): -63,
[SSP] send_instruction: Inst = 0xc1
CPU7: Booted secondary processor
MobiCore mcd: d01|FINGERPRINT comma
MobiCore mcd: d01|[FPLOG]vigis_api
MobiCore mcd: d01|SYNAFP: synaFpIn
MobiCore mcd: d01|SYNAFP: vfmInit.
MobiCore mcd: d01|SYNAFP: vfmInit.
MobiCore mcd: d01|SYNAFP: vfmDevic
[mhi_uci_dump_log] uci_write: 01 17
[mhi_uci_dump_log] uci_read: 01 13
[mhi_uci_dump_log] uci_write: 01 a3
[SSP] ssp_sensorhub_write(3): -79,
[SSP] send_instruction: Inst = 0xb1
[mhi_uci_dump_log] uci_read: 01 13
MobiCore mcd: b02|[Secure SPI] sec_

<6>[ 9836.581489]
e.c 98 4
<6>[ 9836.581496]
e.c 226 4
<6>[ 9836.581501]
otocol.c 1107 4
<6>[ 9836.581507]
rDevice.c 508 4
<6>[ 9836.581511]
otocol.c 843 4
<6>[ 9836.581516]
otocol.c 887 4
<6>[ 9836.581521]
rDevice.c 602 4
<6>[ 9836.581525]
rDevice.c 462 4
<6>[ 9836.581529]
otocol.c 843 4
<6>[ 9836.581533]
otocol.c 887 4
<6>[ 9836.581538]
rDevice.c 548 4
<6>[ 9836.581542]
rDevice.c 471 4
<6>[ 9836.581546]
otocol.c 843 4
<6>[ 9836.581550]
otocol.c 887 4
<6>[ 9836.581554]
rDevice.c 561 4
<6>[ 9836.581558]
58 3
<6>[ 9836.581562]
rDevice.c 468 4
<6>[ 9836.581566]
otocol.c 843 4
<6>[ 9836.581570]
otocol.c 887 4
<6>[ 9836.581574]
rDevice.c 556 4
<6>[ 9836.581578]
rDevice.c 467 4
<6>[ 9836.581582]
otocol.c 843 4
<6>[ 9836.581586]
otocol.c 887 4
<6>[ 9836.581590]
rDevice.c 554 4
<6>[ 9836.581595]
rDevice.c 520 4
<6>[ 9836.581599]
otocol.c 843 4
<6>[ 9836.581603]
otocol.c 887 4
<6>[ 9836.581608]
rDevice.c 614 4
<6>[ 9836.581612]
c 1625 4
<6>[ 9836.581616]
c 282 3

[5:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: vfmDevic

[5:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: vfmDevic

[5:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: palSpiPr

[5:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: scsSenso

[5:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: palSpiPr

[5:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: palSpiPr

[5:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: scsSenso

[5:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: scsSenso

[5:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: palSpiPr

[5:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: palSpiPr

[5:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: scsSenso

[5:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: scsSenso

[5:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: palSpiPr

[5:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: palSpiPr

[5:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: scsSenso

[5:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: scs.c 26

[5:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: scsSenso

[5:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: palSpiPr

[5:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: palSpiPr

[5:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: scsSenso

[5:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: scsSenso

[5:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: palSpiPr

[5:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: palSpiPr

[5:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: scsSenso

[5:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: scsSenso

[5:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: palSpiPr

[5:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: palSpiPr

[5:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: scsSenso

[5:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: scsFwV4.

[5:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: scsFwV4.

<6>[ 9836.581620] [5:


mc_log: 3354]
32 4
<6>[ 9836.581625] [5:
mc_log: 3354]
e.c 259 4
<6>[ 9836.581629] [5:
mc_log: 3354]
int::Returning 0
<6>[ 9836.582937] [3:
qmuxd: 3399]
00 00 03 01 00 4e 19 02 00 04 00 12 01 00
<6>[ 9836.591519] [2:
mc_log: 3354]
ndId :1
<6>[ 9836.591536] [2:
mc_log: 3354]
: 39 : 1, 26228
<6>[ 9836.591547] [2:
mc_log: 3354]
ternal.c 442 4
<6>[ 9836.591557] [2:
mc_log: 3354]
e.c 360 4
<6>[ 9836.591567] [2:
mc_log: 3354]
e.c 400 4
<6>[ 9836.591577] [2:
mc_log: 3354]
e.c 432 4
<6>[ 9836.591588] [2:
mc_log: 3354]
ternal.c 461 4
<6>[ 9836.591598] [2:
mc_log: 3354]
int::Returning 0
<6>[ 9836.595677] [7:
qmuxd: 4756]
00 80 03 01 02 4e 19 02 00 07 00 02 04 00
<6>[ 9836.596367] [4:
qmuxd: 3399]
00 00 03 01 00 4f 19 4d 00 00 00
<6>[ 9836.610233] [1:
qmuxd: 4756]
00 80 03 01 02 4f 19 4d 00 98 00 02 04 00
<6>[ 9836.610293] [2: surfaceflinger: 3350]
<6>[ 9836.611765] [4:
qmuxd: 3399]
00 00 03 01 00 50 19 03 00 38 00 10 01 00
<6>[ 9836.619866] [0: thread_hotplug:14070]
0, exe_cmd 4
<6>[ 9836.619882] [0: thread_hotplug:14070]
dm_hotplug disable = 0
<6>[ 9836.619891] [0: thread_hotplug:14070]
<6>[ 9836.623706] [0:
qmuxd: 4756]
00 80 03 01 02 50 19 03 00 07 00 02 04 00
<6>[ 9836.628583] [0:
qmuxd: 3399]
00 00 03 01 00 51 19 4f 00 00 00
<6>[ 9836.632664] [2:
mc_log: 3354]
ndId :5
<6>[ 9836.632681] [2:
mc_log: 3354]
d
<6>[ 9836.632693] [2:
mc_log: 3354]
: 226
<6>[ 9836.632705] [2:
mc_log: 3354]
roller : 693 : 66
<6>[ 9836.638021] [2:
qmuxd: 4756]
00 80 03 01 02 51 19 4f 00 15 00 02 04 00
<6>[ 9836.638863] [0:
qmuxd: 3399]
00 00 03 01 00 52 19 70 00 0b 00 01 08 00
<6>[ 9836.642903] [2:
mc_log: 3354]
roller : 693 : 66
<6>[ 9836.642921] [2:
mc_log: 3354]
roller : 693 : 66
<6>[ 9836.642933] [2:
mc_log: 3354]
roller : 693 : 66

MobiCore mcd: d01|SYNAFP: scs.c 32


MobiCore mcd: d01|SYNAFP: vfmDevic
MobiCore mcd: d01|Trustlet Fingerpr
[mhi_uci_dump_log] uci_write: 01 10
MobiCore mcd: d01|FINGERPRINT comma
MobiCore mcd: d01|[FPLOG]vigis_api
MobiCore mcd: d01|SYNAFP: synaFpIn
MobiCore mcd: d01|SYNAFP: vfmDevic
MobiCore mcd: d01|SYNAFP: vfmDevic
MobiCore mcd: d01|SYNAFP: vfmDevic
MobiCore mcd: d01|SYNAFP: synaFpIn
MobiCore mcd: d01|Trustlet Fingerpr
[mhi_uci_dump_log] uci_read: 01 13
[mhi_uci_dump_log] uci_write: 01 0c
[mhi_uci_dump_log] uci_read: 01 a4
MDD : s6e3ha2_wqhd_init was called
[mhi_uci_dump_log] uci_write: 01 44
frequency info : 1000000, prev_cmd
lcd is on : 0, low power mode = 0,
cluster1 cores hotplug out : 0
[mhi_uci_dump_log] uci_read: 01 13
[mhi_uci_dump_log] uci_write: 01 0c
MobiCore mcd: d01|FINGERPRINT comma
MobiCore mcd: d01|decrypt is skippe
MobiCore mcd: d01|[FPLOG]vigis_api
MobiCore mcd: d01|[FPLOG]vigis_cont
[mhi_uci_dump_log] uci_read: 01 21
[mhi_uci_dump_log] uci_write: 01 17
MobiCore mcd: d01|[FPLOG]vigis_cont
MobiCore mcd: d01|[FPLOG]vigis_cont
MobiCore mcd: d01|[FPLOG]vigis_cont

<6>[ 9836.649565] [3:


mc_log:
roller : 1166 : 0
<6>[ 9836.649588] [3:
mc_log:
int::Returning 0
<6>[ 9836.652108] [2:
qmuxd:
00 80 03 01 02 52 19 70 00 07 00 02 04
<6>[ 9836.652897] [0:
qmuxd:
00 00 03 01 00 53 19 ac 00 00 00
<6>[ 9836.665949] [0:
mc_log:
ndId :6
<6>[ 9836.665966] [0:
mc_log:
: 253
<6>[ 9836.665979] [0:
mc_log:
roller : 1166 : 1
<6>[ 9836.665990] [0:
mc_log:
pture.c 144 4
<6>[ 9836.666001] [0:
mc_log:
re.c 161 4
<6>[ 9836.666013] [0:
mc_log:
rDevice.c 466 4
<6>[ 9836.666024] [0:
mc_log:
otocol.c 843 4
<6>[ 9836.666422] [2:
qmuxd:
00 80 03 01 02 53 19 ac 00 3b 00 02 04
<6>[ 9836.667206] [0:
qmuxd:
00 00 03 01 00 54 19 4d 00 00 00
<6>[ 9836.681240] [2:
qmuxd:
00 80 03 01 02 54 19 4d 00 98 00 02 04
<6>[ 9836.688546] [3:sensorhubservic:
13, -47, 0
<6>[ 9836.695047] [5:sensorhubservic:
<6>[ 9836.707637] [1:
mc_log:
otocol.c 887 4
<6>[ 9836.707654] [1:
mc_log:
rDevice.c 549 4
<6>[ 9836.707666] [1:
mc_log:
ts.c 981 3
<6>[ 9836.707678] [1:
mc_log:
orLineUpdate.c 3706 3
<6>[ 9836.707690] [1:
mc_log:
intCmdHelpers.c 3842 4
<6>[ 9836.707702] [1:
mc_log:
intCmdHelpers.c 3842 4
<6>[ 9836.707714] [1:
mc_log:
intCmdHelpers.c 1472 3
<6>[ 9836.707726] [1:
mc_log:
rDevice.c 463 4
<6>[ 9836.707737] [1:
mc_log:
otocol.c 843 4
<6>[ 9836.707748] [1:
mc_log:
otocol.c 887 4
<6>[ 9836.707759] [1:
mc_log:
rDevice.c 557 4
<6>[ 9836.707771] [1:
mc_log:
c 270 4
<6>[ 9836.707782] [1:
mc_log:
c 312 4
<6>[ 9836.707793] [1:
mc_log:
c 705 4
<6>[ 9836.707804] [1:
mc_log:

3354] MobiCore mcd: d01|[FPLOG]vigis_cont


3354] MobiCore mcd: d01|Trustlet Fingerpr
4756] [mhi_uci_dump_log] uci_read: 01 13
00
3399] [mhi_uci_dump_log] uci_write: 01 0c
3354] MobiCore mcd: d01|FINGERPRINT comma
3354] MobiCore mcd: d01|[FPLOG]vigis_api
3354] MobiCore mcd: d01|[FPLOG]vigis_cont
3354] MobiCore mcd: d01|SYNAFP: synaFpCa
3354] MobiCore mcd: d01|SYNAFP: vfmCaptu
3354] MobiCore mcd: d01|SYNAFP: scsSenso
3354] MobiCore mcd: d01|SYNAFP: palSpiPr
4756] [mhi_uci_dump_log] uci_read: 01 47
00
3399] [mhi_uci_dump_log] uci_write: 01 0c
4756] [mhi_uci_dump_log] uci_read: 01 a4
00
3377] [SSP] ssp_sensorhub_write(4): -76,
3377] [SSP] ssp_send_cmd: command 0xd1 0
3354] MobiCore mcd: d01|SYNAFP: palSpiPr
3354] MobiCore mcd: d01|SYNAFP: scsSenso
3354] MobiCore mcd: d01|SYNAFP: calResul
3354] MobiCore mcd: d01|SYNAFP: scsWinds
3354] MobiCore mcd: d01|SYNAFP: scsGetPr
3354] MobiCore mcd: d01|SYNAFP: scsGetPr
3354] MobiCore mcd: d01|SYNAFP: scsGetPr
3354] MobiCore mcd: d01|SYNAFP: scsSenso
3354] MobiCore mcd: d01|SYNAFP: palSpiPr
3354] MobiCore mcd: d01|SYNAFP: palSpiPr
3354] MobiCore mcd: d01|SYNAFP: scsSenso
3354] MobiCore mcd: d01|SYNAFP: irDliRT.
3354] MobiCore mcd: d01|SYNAFP: irDliRT.
3354] MobiCore mcd: d01|SYNAFP: irDliRT.
3354] MobiCore mcd: d01|SYNAFP: irDliRT.

c 722 4
<6>[ 9836.707815] [1:
mc_log: 3354]
.c 104 4
<6>[ 9836.707826] [1:
mc_log: 3354]
.c 214 4
<6>[ 9836.707837] [1:
mc_log: 3354]
c 2420 4
<6>[ 9836.707849] [0: fingerprintd:14086]
INT
<6>[ 9836.707865] [1:
mc_log: 3354]
c 599 4
<6>[ 9836.707874] [0: fingerprintd:14086]
<6>[ 9836.707883] [1:
mc_log: 3354]
c 794 4
<6>[ 9836.707894] [1:
mc_log: 3354]
c 549 4
<6>[ 9836.707905] [1:
mc_log: 3354]
c 665 4
<6>[ 9836.707914] [0: fingerprintd:14086]
eady active atatus
<6>[ 9836.707924] [1:
mc_log: 3354]
electFrame.c 938 4
<6>[ 9836.707935] [1:
mc_log: 3354]
c 2685 4
<6>[ 9836.707946] [1:
mc_log: 3354]
.c 85 4
<6>[ 9836.707957] [1:
mc_log: 3354]
.c 1845 4
<6>[ 9836.707967] [0: fingerprintd:14086]
UP OFF
<6>[ 9836.707977] [1:
mc_log: 3354]
.c 1908 4
<6>[ 9836.707989] [0: fingerprintd:14086]
1, active_cpu=0x00000004
<6>[ 9836.707998] [1:
mc_log: 3354]
.c 905 4
<6>[ 9836.708009] [1:
mc_log: 3354]
c 1122 4
<6>[ 9836.708020] [1:
mc_log: 3354]
re.c 108 4
<6>[ 9836.708031] [1:
mc_log: 3354]
re.c 418 4
<6>[ 9836.708043] [1:
mc_log: 3354]
int::Returning 0
<6>[ 9836.708383] [4:
mc_fastcall: 1747]
<6>[ 9836.709303] [0: fingerprintd:14086]
INT
<6>[ 9836.709319] [0: fingerprintd:14086]
<6>[ 9836.709372] [0: fingerprintd:14086]
UP ON:1, retry: 0
<6>[ 9836.709384] [0: fingerprintd:14086]
ling time is too short. wait 10ms
<6>[ 9836.719240] [0: thread_hotplug:14070]
0, exe_cmd 4
<6>[ 9836.719256] [0: thread_hotplug:14070]
dm_hotplug disable = 0
<6>[ 9836.719264] [0: thread_hotplug:14070]
<6>[ 9836.723369] [0: fingerprintd:14086]
4, active_cpu=0x00000001
<6>[ 9836.725724] [1:
mc_fastcall: 1747]

MobiCore mcd: d01|SYNAFP: vcsImage


MobiCore mcd: d01|SYNAFP: vcsImage
MobiCore mcd: d01|SYNAFP: irDliRT.
vfsspi_ioctl VFSSPI_IOCTL_SET_DRDY_
MobiCore mcd: d01|SYNAFP: dliUtil.
vfsspi_enableIrq
MobiCore mcd: d01|SYNAFP: dliUtil.
MobiCore mcd: d01|SYNAFP: irDliRT.
MobiCore mcd: d01|SYNAFP: irDliRT.
vfsspi_set_drdy_int drdy pin is alr
MobiCore mcd: d01|SYNAFP: vcsIR2DS
MobiCore mcd: d01|SYNAFP: irDliRT.
MobiCore mcd: d01|SYNAFP: vcsIRApi
MobiCore mcd: d01|SYNAFP: vcsIRApi
vfsspi_ioctl VFSSPI_IOCTL_CPU_SPEED
MobiCore mcd: d01|SYNAFP: vcsIRApi
MobiCore mcd: <- core_num=0x0000000
MobiCore mcd: d01|SYNAFP: vcsIRApi
MobiCore mcd: d01|SYNAFP: irDliRT.
MobiCore mcd: d01|SYNAFP: vfmCaptu
MobiCore mcd: d01|SYNAFP: vfmCaptu
MobiCore mcd: d01|Trustlet Fingerpr
MobiCore mcd: CoreSwap ok 4 -> 1
vfsspi_ioctl VFSSPI_IOCTL_SET_DRDY_
vfsspi_disableIrq
vfsspi_ioctl VFSSPI_IOCTL_CPU_SPEED
secos_booster_request_pm_qos: recal
frequency info : 1000000, prev_cmd
lcd is on : 0, low power mode = 0,
cluster1 cores hotplug out : 0
MobiCore mcd: <- core_num=0x0000000
MobiCore mcd: CoreSwap ok 1 -> 4

<6>[ 9836.729591] [3:


mc_log: 3354] MobiCore mcd: d01|FINGERPRINT comma
ndId :6
<6>[ 9836.731913] [6:
mc_log: 3354] MobiCore mcd: d01|[FPLOG]vigis_api
: 253
<6>[ 9836.731923] [6:
mc_log: 3354] MobiCore mcd: d01|[FPLOG]vigis_cont
roller : 1166 : 1
<6>[ 9836.731929] [6:
mc_log: 3354] MobiCore mcd: d01|SYNAFP: synaFpCa
pture.c 182 4
<6>[ 9836.731934] [6:
mc_log: 3354] MobiCore mcd: d01|SYNAFP: vfmCaptu
re.c 1158 4
<6>[ 9836.731939] [6:
mc_log: 3354] MobiCore mcd: d01|SYNAFP: vfmCaptu
re.c 1201 4
<6>[ 9836.731943] [6:
mc_log: 3354] MobiCore mcd: d01|Trustlet Fingerpr
int::Returning 0
<6>[ 9836.732034] [0: fingerprintd:14086] vfsspi_ioctl VFSSPI_IOCTL_SET_DRDY_
INT
<6>[ 9836.732049] [0: fingerprintd:14086] vfsspi_enableIrq
<6>[ 9836.732112] [0: fingerprintd:14086] vfsspi_ioctl VFSSPI_IOCTL_CPU_SPEED
UP OFF
<6>[ 9836.732128] [0: fingerprintd:14086] MobiCore mcd: <- core_num=0x0000000
1, active_cpu=0x00000004
<6>[ 9836.735867] [4:
mc_fastcall: 1747] MobiCore mcd: CoreSwap ok 4 -> 1
<6>[ 9836.746476] [4: surfaceflinger: 3350] dsim_panel_set_brightness : platfor
m : 0, : mapping : 2, real : 2, index : 0, interpolation : 0
<6>[ 9836.746567] [4: surfaceflinger: 3350] dsim_panel_get_elvssoffset 0
<6>[ 9836.746614] [4: surfaceflinger: 3350] vint: 18
<6>[ 9836.746700] [4: surfaceflinger: 3350] acl : 2, opr: 12
<6>[ 9836.746705] [4: surfaceflinger: 3350] acl: 2(50), auto_brightness: 0
<6>[ 9836.746730] [4: surfaceflinger: 3350] dsim_panel_set_tset temperature: 25
, tset: 25
<6>[ 9836.746752] [4: surfaceflinger: 3350] hbm: 0, auto_brightness: 0
<6>[ 9836.746795] [4: surfaceflinger: 3350] MDD : s6e3ha2_wqhd_displayon was ca
lled
<6>[ 9836.746819] [4: surfaceflinger: 3350] pclk_dsim0: 55 Mhz
<6>[ 9836.746823] [4: surfaceflinger: 3350] mipidphy0_rx: 20 Mhz
<6>[ 9836.746828] [4: surfaceflinger: 3350] mipidphy0_bit: 187 Mhz
<6>[ 9836.746832] [4: surfaceflinger: 3350] rgb_vclk0: 300 Mhz
<6>[ 9836.746836] [4: surfaceflinger: 3350] pclk_ahb2apb_disp0p: 55 Mhz
<6>[ 9836.746839] [4: surfaceflinger: 3350] dsim_enable -<6>[ 9836.746929] [4: surfaceflinger: 3350] decon_blank -- blank_mode : 0
<6>[ 9836.746984] [4: surfaceflinger: 3350] dsim_panel_set_brightness : platfor
m : 0, : mapping : 2, real : 2, index : 0, interpolation : 0
<6>[ 9836.748141] [2: kworker/u16:9:32452] mailbox : APM SRAM stable
<6>[ 9836.748158] [2: kworker/u16:9:32452] mailbox : fw_checksum [1326], DRAM
checksum [1326], sram checksum [1326]
<6>[ 9836.748197] [2: kworker/u16:9:32452] mailbox: hsi2c -> apm mode
<3>[ 9836.795849] [4: surfaceflinger: 3350] exynos-mipi-dsi 13900000.dsim: ID:
57 : MIPI DSIM write Timeout! 0xffffffc000b19548
<3>[ 9836.795862] [4: surfaceflinger: 3350] exynos-mipi-dsi 13900000.dsim: 0x80
10010F, 0x00000000, 0x0000551B, 0x20FFFFFF
<6>[ 9836.796484] [4: surfaceflinger: 3350] dsim_panel_get_elvssoffset 0
<6>[ 9836.796591] [4: surfaceflinger: 3350] vint: 18
<6>[ 9836.796717] [4: surfaceflinger: 3350] acl : 2, opr: 12
<6>[ 9836.796721] [4: surfaceflinger: 3350] acl: 2(50), auto_brightness: 0
<6>[ 9836.796747] [4: surfaceflinger: 3350] dsim_panel_set_tset temperature: 25
, tset: 25
<6>[ 9836.796774] [4: surfaceflinger: 3350] hbm: 0, auto_brightness: 0
<6>[ 9836.796821] [4: surfaceflinger: 3350] mdnie mdnie: fb_notifier_callback:
0
<6>[ 9836.796933] [4: surfaceflinger: 3350] mdnie mdnie: AUTO_UI

<6>[ 9836.796941] [4: surfaceflinger: 3350] LCD is on


<6>[ 9836.800094] [4:PmsDisplayThrea:14102] fts_touch 7-0049: fts_start_device
<6>[ 9836.800108] [5:PmsDisplayThrea:14101] sec_touchkey_driver 3-0020: touchke
y_power_on: on
<6>[ 9836.800188] [6:PmsDisplayThrea:14102] fts_touch 7-0049: fts_power_ctrl: o
n
<6>[ 9836.806061] [5:
Binder_1: 3442] [SSP] ssp_sensorhub_write(4): -79,
7, 0, 0
<6>[ 9836.806076] [5:
Binder_1: 3442] [SSP] send_instruction: Inst = 0xb1
, Sensor Type = 0x7, data = 0
<6>[ 9836.812698] I[2: irq/15-SSP_Int: 1775] [SSP] ssp_sensorhub_list(11): 1, 1,
48, 0, 0, 0, 60, 0, 0, 0, 52
<6>[ 9836.812737] [2: irq/15-SSP_Int: 1775] [SSP] [M] #>r=35 g=27 b=26 c=80 ati
me=245 again=3 lux=51
<6>[ 9836.812737] [2: irq/15-SSP_Int: 1775] #>r=36 g=27 b=27 c=81 atime=245 aga
in=3 lux=52
<6>[ 9836.812737] [2: irq/15-SSP_Int: 1775] updateAutoBrightness, 52, 52.0, 5.0
<52.0<154.0 (60)
<6>[ 9836.812737] [2: irq/15-SSP_Int: 1775] SH_LM_Template_Process_AutoBrightne
ss_Cellphone (110) candela(60), lux(52)
<6>[ 9836.812787] [0:ssp_sensorhub_t: 1783] wakeup source sensorhub activation
skipped
<6>[ 9836.812805] I[4:SensorHubServic: 3439] [SSP] ssp_sensorhub_read(11): 1, 1,
48, 0, 0, 0, 60, 0, 0, 0, 52
<6>[ 9836.817478] [5:PowerManagerSer: 4311] backlight panel: auto_brightness_st
ore: 0, 2
<6>[ 9836.817492] [5:PowerManagerSer: 4311] dsim_panel_set_brightness : platfor
m : 0, : mapping : 2, real : 2, index : 0, interpolation : 0
<6>[ 9836.819212] [0: thread_hotplug:14070] frequency info : 1000000, prev_cmd
0, exe_cmd 4
<6>[ 9836.819237] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9836.819252] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9836.827980] [5:PowerManagerSer: 4311] dsim_panel_get_elvssoffset 0
<6>[ 9836.828024] [5:PowerManagerSer: 4311] vint: 18
<6>[ 9836.828111] [5:PowerManagerSer: 4311] acl : 2, opr: 12
<6>[ 9836.828118] [5:PowerManagerSer: 4311] acl: 2(50), auto_brightness: 2
<6>[ 9836.828147] [5:PowerManagerSer: 4311] dsim_panel_set_tset temperature: 25
, tset: 25
<6>[ 9836.828173] [5:PowerManagerSer: 4311] hbm: 0, auto_brightness: 2
<6>[ 9836.828795] [5:PowerManagerSer: 4311] mdnie mdnie: auto_brightness_store:
value=2
<6>[ 9836.829525] [5:PowerManagerSer: 4311] backlight panel: auto_brightness_st
ore: 2, 0
<6>[ 9836.829537] [5:PowerManagerSer: 4311] dsim_panel_set_brightness : platfor
m : 0, : mapping : 2, real : 2, index : 0, interpolation : 0
<6>[ 9836.829671] [5:PowerManagerSer: 4311] dsim_panel_get_elvssoffset 0
<6>[ 9836.829731] [5:PowerManagerSer: 4311] vint: 18
<6>[ 9836.829810] [5:PowerManagerSer: 4311] acl : 2, opr: 12
<6>[ 9836.829817] [5:PowerManagerSer: 4311] acl: 2(50), auto_brightness: 0
<6>[ 9836.829845] [5:PowerManagerSer: 4311] dsim_panel_set_tset temperature: 25
, tset: 25
<6>[ 9836.829873] [5:PowerManagerSer: 4311] hbm: 0, auto_brightness: 0
<6>[ 9836.830042] [5:PowerManagerSer: 4311] mdnie mdnie: auto_brightness_store:
value=0
<6>[ 9836.830314] [4:PhotonicModulat: 5207] dsim_panel_set_brightness : platfor
m : 25, : mapping : 27, real : 27, index : 22, interpolation : 0
<6>[ 9836.830397] [4:PhotonicModulat: 5207] dsim_panel_get_elvssoffset 0
<6>[ 9836.830442] [4:PhotonicModulat: 5207] vint: 21
<6>[ 9836.830514] [4:PhotonicModulat: 5207] acl : 2, opr: 12

<6>[ 9836.830521] [4:PhotonicModulat: 5207] acl: 2(50), auto_brightness: 0


<6>[ 9836.830544] [4:PhotonicModulat: 5207] dsim_panel_set_tset temperature: 25
, tset: 25
<6>[ 9836.830563] [4:PhotonicModulat: 5207] hbm: 0, auto_brightness: 0
<6>[ 9836.830851] [5:
Binder_3:30892] [SSP] ssp_sensorhub_write(4): -78,
48, 0, 0
<6>[ 9836.830863] [5:
Binder_3:30892] [SSP] send_instruction: Inst = 0xb2
, Sensor Type = 0x30, data = 0
<6>[ 9836.832883] [4:PmsDisplayThrea:14102] fts_touch 7-0049: fts_wait_for_read
y: 10, 03, 01, 19, 21, 1E, 38, 00
<6>[ 9836.833256] [4:PmsDisplayThrea:14102] fts_touch 7-0049: FTS B60007 = 39
6C 03 21 19 00
<6>[ 9836.833265] [4:PmsDisplayThrea:14102] fts_touch 7-0049: FTS Chip ID : 39
6C
<6>[ 9836.833272] [4:PmsDisplayThrea:14102] fts_touch 7-0049: FTS SystemReset
<6>[ 9836.866223] [7:PmsDisplayThrea:14102] fts_touch 7-0049: fts_wait_for_read
y: 10, 03, 01, 19, 21, 1E, 38, 00
<6>[ 9836.868002] [7:PmsDisplayThrea:14102] fts_touch 7-0049: FTS Command (91)
, ret = 1
<6>[ 9836.890204] [5: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9836.890248] [6:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[ 9836.890270] [6:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[ 9836.890290] [6:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9836.890484] [6:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[ 9836.919276] [4:
mc_log: 3354] MobiCore mcd: e01|ccccccccccccccccc
cccccccccTL_TZ_CCM: tciBufferLen = 38912 = 0x9800
<6>[ 9836.919302] [4:
mc_log: 3354] MobiCore mcd: e01|Trustlet TL_TZ_CC
M: Starting
<6>[ 9836.919317] [4:
mc_log: 3354] MobiCore mcd: e01|TL_TZ_CCM: tciBuf
ferLen = 38912 = 0x9800
<6>[ 9836.919345] [7:PmsDisplayThrea:14102] fts_touch 7-0049: FTS Command (93)
, ret = 1
<6>[ 9836.921141] [4:
mc_log: 3354] MobiCore mcd: e01|TL_TZ_CCM: sendms
g envelope length = 19456 = 0x4c00
<6>[ 9836.921156] [4:
mc_log: 3354] MobiCore mcd: e01|TL_TZ_CCM: sendms
g = 00092c80, respmsg = 0009785c
<6>[ 9836.921169] [4:
mc_log: 3354] MobiCore mcd: e01|Trustlet TL_TZ_CC
M: Got a message!
<6>[ 9836.921181] [4:
mc_log: 3354] MobiCore mcd: e01|TZ_CCM: we got a
command
<6>[ 9836.921194] [4:
mc_log: 3354] MobiCore mcd: e01|TZ_CCM: process_c
md: CMD_TZ_CCM_C_Initialize:
<6>[ 9836.921206] [4:
mc_log: 3354] MobiCore mcd: e01|TIMA trustlet: Re
ading knox license status
<6>[ 9836.922556] [4:
mc_log: 3354] MobiCore mcd: e01|TIMA trustlet: g
et_sec_TIMA_address tima_sec_mem_addr : FE800000
<6>[ 9836.925873] [4:
mc_log: 3354] MobiCore mcd: 501|drTima: processin
g TIMA_DRIVER_PHYS_MEM_ACCESS_COPY
<6>[ 9836.925886] [4:
mc_log: 3354] MobiCore mcd: 501|drTima: data_len
= 4 = 0x4
<6>[ 9836.925898] [4:
mc_log: 3354] MobiCore mcd: 501|drTima: PHYS_READ
<6>[ 9836.925910] [4:
mc_log: 3354] MobiCore mcd: e01|read license stat
us is: 0
<6>[ 9836.925922] [4:
mc_log: 3354] MobiCore mcd: e01|low security mode
<6>[ 9836.925934] [4:
mc_log: 3354] MobiCore mcd: 501|drTima: processin

g TIMA_DRIVER_PHYS_MEM_ACCESS_COPY
<6>[ 9836.925946] [4:
mc_log: 3354] MobiCore mcd: 501|drTima: data_len
= 32 = 0x20
<6>[ 9836.926407] [4:
mc_log: 3354] MobiCore mcd: 501|drTima: PHYS_READ
<6>[ 9836.928517] [4:
mc_log: 3354] MobiCore mcd: e01|TIMA trustlet: wa
rranty violation detected 18
<6>[ 9836.928531] [4:
mc_log: 3354] MobiCore mcd: e01|TZ_COMMON: Initia
lize failed - tamper fuse set
<6>[ 9836.928544] [4:
mc_log: 3354] MobiCore mcd: e01|TL_TZ_CCM: TL CCM
general initialization failure
<6>[ 9836.928556] [4:
mc_log: 3354] MobiCore mcd: e01|Trustlet TL_TZ_CC
M: sendmsg->header.id = 0x00000002
<6>[ 9836.928568] [4:
mc_log: 3354] MobiCore mcd: e01|Trustlet TL_TZ_CC
M: respmsg->header.id = 0x80000002
<6>[ 9836.928580] [4:
mc_log: 3354] MobiCore mcd: e01|Trustlet TL_TZ_CC
M: respmsg->header.status = 0x00000000
<6>[ 9836.928591] [4:
mc_log: 3354] MobiCore mcd: e01|Trustlet TL_TZ_CC
M: Returning = 0x00000000
<6>[ 9836.931052] [7:
mc_log: 3354] MobiCore mcd: 104| SMGNT send MSG_C
LOSE_TRUSTLET for thread e01 to IPCH
<6>[ 9836.935898] [5:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 202 (UUID=02010000-0000-0000-0000-000000005000) (server 0/8 status i
s 00000001)
<6>[ 9836.935923] [5:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 302 (UUID=ffffffff-0000-0000-0000-000000000002) (server 1/8 status i
s 00000001)
<6>[ 9836.937867] [5:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 402 (UUID=ffffffff-0000-0000-0000-000000000001) (server 2/8 status i
s 00000001)
<6>[ 9836.939224] [5:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 501 (UUID=ffffffff-d000-0000-0000-00000000000a) (server 3/8 status i
s 00000001)
<6>[ 9836.941924] [5:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 602 (UUID=ffffffff-d000-0000-0000-000000000016) (server 4/8 status i
s 00000001)
<6>[ 9836.945870] [5:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 702 (UUID=07050500-0000-0000-0000-000000000000) (server 5/8 status i
s 00000001)
<6>[ 9836.945887] [5:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to b02 (UUID=ffffffff-d000-0000-0000-00000000000e) (server 6/8 status i
s 00000001)
<6>[ 9836.948007] [2:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 902 (UUID=ffffffff-d000-0000-0000-000000000014) (server 7/8 status i
s 00000001)
<6>[ 9836.948030] [2:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop do
ne
<6>[ 9836.948045] [2:
mc_log: 3354] MobiCore mcd: 501|drTima: MSG_CLOSE
_TRUSTLET call 0x40001
<6>[ 9836.952206] [2:
mc_log: 3354] MobiCore mcd: b02|Driver SPI receiv
es MSG_CLOSE_TRUSTLET[0x00040001, 0x0001000e]
<6>[ 9836.952234] [2:
mc_log: 3354] MobiCore mcd: 104| SMGNT smgntClose
Session done
<7>[ 9836.954119] [5:PmsDisplayThrea:14101] touchkey:ic mode is n1
<3>[ 9836.962825] [6:
tlc_server: 5103] MobiCore mcd: closed by PID(5103),
name(tlc_server)
<6>[ 9836.975992] [7:PmsDisplayThrea:14102] fts_touch 7-0049: FTS Command (A1)
, ret = 1
<6>[ 9836.976017] [7:PmsDisplayThrea:14102] fts_touch 7-0049: FTS INT Enable
<3>[ 9836.976205] [7:PmsDisplayThrea:14102] fts_touch 7-0049: FTS cmd after wak
eup : h0

<6>[ 9836.976855] [1:PmsDisplayThrea: 4338]


<6>[ 9836.976892] [1:PmsDisplayThrea: 4338]
<6>[ 9837.002693] [6: mSvcLEDThread: 4330]
gb_pattern
<6>[ 9837.002713] [6: mSvcLEDThread: 4330]
_state
<6>[ 9837.002724] [6: mSvcLEDThread: 4330]
ber, 1
<6>[ 9837.002733] [6: mSvcLEDThread: 4330]
ber, 1
<6>[ 9837.002903] [1:irq/12-fts_touc: 1540]
tual Calib Frame Check Event
<6>[ 9837.003410] [6: mSvcLEDThread: 4330]
_state, led_num = 1, brightness = 0
<6>[ 9837.003807] [6: mSvcLEDThread: 4330]
_state
<6>[ 9837.003820] [6: mSvcLEDThread: 4330]
ber, 2
<6>[ 9837.003829] [6: mSvcLEDThread: 4330]
ber, 2
<6>[ 9837.004128] [6: mSvcLEDThread: 4330]
_state, led_num = 2, brightness = 0
<6>[ 9837.004942] [6: mSvcLEDThread: 4330]
_state
<6>[ 9837.004956] [6: mSvcLEDThread: 4330]
ber, 3
<6>[ 9837.004964] [6: mSvcLEDThread: 4330]
ber, 3
<6>[ 9837.005267] [6: mSvcLEDThread: 4330]
_state, led_num = 3, brightness = 0
<6>[ 9837.005562] [6: mSvcLEDThread: 4330]
p
<6>[ 9837.007446] [6: wpa_supplicant: 5196]
<6>[ 9837.007462] [6: wpa_supplicant: 5196]
<4>[ 9837.007471] [6: wpa_supplicant: 5196]
nd setting
<6>[ 9837.007485] [6: wpa_supplicant: 5196]
<4>[ 9837.007496] [6: wpa_supplicant: 5196]
<4>[ 9837.014326] [6: wpa_supplicant: 5196]
lue = 0
<7>[ 9837.015660] [0:
kworker/0:0:13589]
<6>[ 9837.017359] [1:
kworker/1:3:17119]
0 => (set_volt: 700000, get_volt: 700000)
<6>[ 9837.019372] [1:
kworker/1:3:17119]
volt: 650000, get_volt: 650000)
<6>[ 9837.021603] [1:
kworker/1:3:17119]
=> 650000
<6>[ 9837.021630] [1:
kworker/1:3:17119]
emp : 34
<6>[ 9837.021646] [1:
kworker/1:3:17119]
<6>[ 9837.022347] [6: wpa_supplicant: 5196]
<7>[ 9837.025921] [0:
kworker/0:0:13589]
<7>[ 9837.025965] [0:
kworker/0:0:13589]
1
<7>[ 9837.025986] [0:
kworker/0:0:13589]
hub
<3>[ 9837.027116] [0:
kworker/0:0:13589]
time_suspend
<7>[ 9837.039279] [0:
kworker/0:0:13589]
amsung_usb2phy_runtime_suspend

LCD on
is_lcd_on is TRUE
leds-max77843-rgb: store_max77843_r
leds-max77843-rgb: max77843_rgb_set
leds-max77843-rgb: max77843_rgb_num
leds-max77843-rgb: max77843_rgb_num
fts_touch 7-0049: [FTS] Received Mu
leds-max77843-rgb: max77843_rgb_set
leds-max77843-rgb: max77843_rgb_set
leds-max77843-rgb: max77843_rgb_num
leds-max77843-rgb: max77843_rgb_num
leds-max77843-rgb: max77843_rgb_set
leds-max77843-rgb: max77843_rgb_set
leds-max77843-rgb: max77843_rgb_num
leds-max77843-rgb: max77843_rgb_num
leds-max77843-rgb: max77843_rgb_set
leds-max77843-rgb: max77843_rgb_ram
[dhd] dhd_suspend_resume_helper
[dhd] dhd_set_suspend
dhd_set_suspend: Remove extra suspe
[dhd] resume power_mode: 2
dhd_prot_ioctl: SET PM to 2
dhd_enable_packet_filter: enter, va
usb 1-2: usb auto-suspend, wakeup 1
MIF(1026000): unset TMU_COLD: 73750
DISP(167000): unset TMU_COLD: (set_
INT(100000): unset TMU_COLD: 687500
tmu temperature state 1 to 0, cur_t
gpu temperature state 1 to 0
[dhd] resume bcn_li_dtim: 0
hub 1-0:1.0: hub_suspend
usb usb1: bus auto-suspend, wakeup
s5p-ehci 15510000.usb: suspend root
s5p-ehci 15510000.usb: s5p_ehci_run
samsung-usb2phy 15530000.usb2phy: s

<6>[ 9837.039324] [0:


kworker/0:0:13589]
<6>[ 9837.039343] [0:
kworker/0:0:13589]
child=0
<6>[ 9837.055018] [4:
Binder_2:30887]
26, 0, 0, 0, 0, 0, 0, 0, 0, 16, 16, 33
<6>[ 9837.055034] [4:
Binder_2:30887]
, Sensor Type = 0x1a, data = 0
<6>[ 9837.079132] [6:sensorhubservic: 3377]
26, 1, 0
<6>[ 9837.079177] [6:sensorhubservic: 3377]
, Sensor Type = 0x1a, data = 1
<6>[ 9837.089136] I[2: irq/15-SSP_Int: 1775]
26, 1, 3, 126, 16, -18, -1, 0
<6>[ 9837.089209] [2: irq/15-SSP_Int: 1775]
<6>[ 9837.089209] [2: irq/15-SSP_Int: 1775]
<6>[ 9837.089209] [2: irq/15-SSP_Int: 1775]
<6>[ 9837.089209] [2: irq/15-SSP_Int: 1775]
<6>[ 9837.089209] [2: irq/15-SSP_Int: 1775]
<6>[ 9837.089209] [2: irq/15-SSP_Int: 1775]
<6>[ 9837.089209] [2: irq/15-SSP_Int: 1775]
<6>[ 9837.089255] [4:ssp_sensorhub_t: 1783]
skipped
<6>[ 9837.089307] I[5:SensorHubServic: 3439]
26, 1, 3, 126, 16, -18, -1, 0
<6>[ 9837.112276] I[2: irq/15-SSP_Int: 1775]
26, 1, 3, 126, 17, 42, 0, 2
<6>[ 9837.112339] [4:ssp_sensorhub_t: 1783]
skipped
<6>[ 9837.112381] I[6:SensorHubServic: 3439]
26, 1, 3, 126, 17, 42, 0, 2
<6>[ 9837.169128] I[2: irq/15-SSP_Int: 1775]
7, 0
<6>[ 9837.169212] [2: irq/15-SSP_Int: 1775]
<6>[ 9837.170240] [5:ssp_sensorhub_t: 1783]
skipped
<6>[ 9837.170289] I[6:SensorHubServic: 3439]
7, 0
<6>[ 9837.222189] [6:
Binder_7: 5481]
eout 0, flag 0, ret 0
<6>[ 9837.222321] [6:
Binder_7: 5481]
e = 8193, old_enable = 8192
<6>[ 9837.222332] [6:
Binder_7: 5481]
00000000ns
<6>[ 9837.222342] [6:
Binder_7: 5481]
, Sensor Type = 0x0, data = 200
<6>[ 9837.228675] [6:
Binder_7: 5481]
eout 0, flag=0, ret1
<6>[ 9837.228700] [2: irq/15-SSP_Int: 1775]
<6>[ 9837.228700] [2: irq/15-SSP_Int: 1775]
<6>[ 9837.228700] [2: irq/15-SSP_Int: 1775]
<6>[ 9837.228700] [2: irq/15-SSP_Int: 1775]
<6>[ 9837.232083] [7:
Binder_C: 5864]
e = 8705, old_enable = 8193
<6>[ 9837.232097] [7:
Binder_C: 5864]
200000000ns
<6>[ 9837.232109] [7:
Binder_C: 5864]
, Sensor Type = 0x9, data = 200
<6>[ 9837.238464] [7:
Binder_C: 5864]
eout 0, flag=0, ret1
<6>[ 9837.246553] [5: MHI_EV_THREAD: 4604]

request_active_lock_release
s5p_ehci_runtime_suspend: usage=0,
[SSP] ssp_sensorhub_write(13): -79,
[SSP] send_instruction: Inst = 0xb1
[SSP] ssp_sensorhub_write(4): -72,
[SSP] send_instruction: Inst = 0xb8
[SSP] ssp_sensorhub_list(10): 1, 1,
[SSP] [M] save bak
PD: 1 2340.000000 2 910.000000 3 13
ACCY. 06Jan15
AL3 1 0 8193 1441151885053526152
AT-AL 1 0 0 0,AT 0 0 1000 0000
AL26 0 1 8193 1441151885120635016
AT RI Nor -26 1 1
wakeup source sensorhub activation
[SSP] ssp_sensorhub_read(10): 1, 1,
[SSP] ssp_sensorhub_list(10): 1, 1,
wakeup source sensorhub activation
[SSP] ssp_sensorhub_read(10): 1, 1,
[SSP] ssp_sensorhub_list(4): 1, 1,
[SSP] [M] SSP Rotation Mode 0
wakeup source sensorhub activation
[SSP] ssp_sensorhub_read(4): 1, 1,
[SSP] batch 0: delay 200000000, tim
[SSP] set_sensors_enable: new_enabl
[SSP] enable_sensor: add 1, New = 2
[SSP] send_instruction: Inst = 0xa1
[SSP] enable_sensor: delay 200, tim
[SSP] [M] batch rate = 20 180 0 0
save bak odr 0, 1, 20, 20, 0
save bak odr 0, 0, 180, 180, 20
AD 0 6 0 1, 180
[SSP] set_sensors_enable: new_enabl
[SSP] enable_sensor: add 512, New =
[SSP] send_instruction: Inst = 0xa1
[SSP] enable_sensor: delay 200, tim
[recycle_trb_and_ring] Cannot ring

DB state 4 link 1, ring type 2, index 0 db 0x5fa268d0


<6>[ 9837.246580] [5: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9837.246619] [6:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9837.246637] [6:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9837.246651] [6:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work was
cancelled
<6>[ 9837.247241] [6:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9837.251162] [6:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 8d 17 51 00 0e 00 14 06 00
<6>[ 9837.251898] [4:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 55 19 4f 00 00 00
<6>[ 9837.264146] [6:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 55 19 4f 00 15 00 02 04 00
<6>[ 9837.303297] [4:SSRM Handler Th: 9082] sec-battery battery.51: sec_bat_sto
re_attrs: siop level: 70
<6>[ 9837.303333] [4:SSRM Handler Th: 9082] bq51221_chg_set_property siop = 70
<6>[ 9837.305035] [0:
kworker/0:2:31050] sec_bat_siop_work : set current by
siop level(70)
<6>[ 9837.305076] [0:
kworker/0:2:31050] max77843_set_current: siop_level=70
, afc_detec=0, current_max=460, current_now=0
<6>[ 9837.305094] [0:
kworker/0:2:31050] max77843_set_current: siop_level=70
, afc_detec=0, current_max=460, current_now=0
<6>[ 9837.307803] [0:
kworker/0:2:31050] max77843_check_aicl_state aicl stat
e
<6>[ 9837.308139] [0:
kworker/0:2:31050] [max77843_set_charge_current] REG(0
xb9) DATA(0x80), CURRENT(0)
<7>[ 9837.309077] [0:
kworker/0:2:31050] max77843_set_buck : CHG_CNFG_00(0x1
4)
<6>[ 9837.309344] [0:
kworker/0:2:31050] [max77843_set_input_current] REG(0x
c0) DATA(0x17)
<7>[ 9837.309540] [0:
kworker/0:2:31050] MAX77843 addr : 0xb1 data : 0x1a
<7>[ 9837.310031] [0:
kworker/0:2:31050] MAX77843 addr : 0xb2 data : 0x9d
<7>[ 9837.310504] [0:
kworker/0:2:31050] MAX77843 addr : 0xb3 data : 0x00
<7>[ 9837.310705] [0:
kworker/0:2:31050] MAX77843 addr : 0xb4 data : 0x38
<7>[ 9837.310904] [0:
kworker/0:2:31050] MAX77843 addr : 0xb5 data : 0x00
<7>[ 9837.311101] [0:
kworker/0:2:31050] MAX77843 addr : 0xb6 data : 0xff
<7>[ 9837.311298] [0:
kworker/0:2:31050] MAX77843 addr : 0xb7 data : 0x14
<7>[ 9837.311493] [0:
kworker/0:2:31050] MAX77843 addr : 0xb8 data : 0x30
<7>[ 9837.311697] [0:
kworker/0:2:31050] MAX77843 addr : 0xb9 data : 0x80
<7>[ 9837.311890] [0:
kworker/0:2:31050] MAX77843 addr : 0xba data : 0x38
<7>[ 9837.312081] [0:
kworker/0:2:31050] MAX77843 addr : 0xbb data : 0x9d
<6>[ 9837.312218] [1:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 56 19 43 00 00 00
<7>[ 9837.312267] [0:
kworker/0:2:31050] MAX77843 addr : 0xbc data : 0x96
<7>[ 9837.312462] [0:
kworker/0:2:31050] MAX77843 addr : 0xbd data : 0x0c
<7>[ 9837.312699] [0:
kworker/0:2:31050] MAX77843 addr : 0xbe data : 0x30
<7>[ 9837.312897] [0:
kworker/0:2:31050] MAX77843 addr : 0xbf data : 0xff
<7>[ 9837.313092] [0:
kworker/0:2:31050] MAX77843 addr : 0xc0 data : 0x0d
<7>[ 9837.313289] [0:
kworker/0:2:31050] MAX77843 addr : 0xc1 data : 0x17
<7>[ 9837.313484] [0:
kworker/0:2:31050] MAX77843 addr : 0xc2 data : 0x00
<7>[ 9837.313684] [0:
kworker/0:2:31050] MAX77843 addr : 0xc3 data : 0x67
<6>[ 9837.321635] [0:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 9f
00 80 03 01 02 56 19 43 00 93 00 02 04 00
<3>[ 9837.351958] [4:
hci_thread: 6674] [BT] set_wake_locked value = 1
<6>[ 9837.409972] I[2: irq/15-SSP_Int: 1775] [SSP] ssp_sensorhub_list(10): 1, 1,
26, 1, 3, 126, 18, 85, 0, 1
<6>[ 9837.410006] [2: irq/15-SSP_Int: 1775] [SSP] [M] #>LI
<6>[ 9837.410006] [2: irq/15-SSP_Int: 1775] RM 0 6 1 5 60

<6>[ 9837.410006] [2: irq/15-SSP_Int:


in=3 lux=57
<6>[ 9837.410044] [5:ssp_sensorhub_t:
skipped
<6>[ 9837.410070] I[7:SensorHubServic:
26, 1, 3, 126, 18, 85, 0, 1
<4>[ 9837.506529] [5: wpa_supplicant:
0
<4>[ 9837.507080] [5: wpa_supplicant:
ove = 1, num = 2
<4>[ 9837.507930] [5: wpa_supplicant:
1
<6>[ 9837.530356] [4: MHI_EV_THREAD:
ceived ring 0x0
<6>[ 9837.530412] [3:MHI_STATE_THREA:
ng to 3
<6>[ 9837.530440] [3:MHI_STATE_THREA:
M1 state transition from state 3
<6>[ 9837.530464] [3:MHI_STATE_THREA:
ansition to M2
<6>[ 9837.530662] [3:MHI_STATE_THREA:
deferred work
<6>[ 9837.532832] [7:
Binder_1:
58, 1, 0
<6>[ 9837.532846] [7:
Binder_1:
, Sensor Type = 0x3a, data = 1
<6>[ 9837.547627] I[2: irq/15-SSP_Int:
58, 1
<6>[ 9837.547678] [4:ssp_sensorhub_t:
skipped
<6>[ 9837.547702] I[7:SensorHubServic:
58, 1
<6>[ 9837.588330] [2: irq/15-SSP_Int:
me=245 again=3 lux=58
<6>[ 9837.647736] [4: wpa_supplicant:
: START SCAN
<6>[ 9837.769753] I[2: irq/15-SSP_Int:
26, 1, 3, 126, 19, -68, 0, 0
<6>[ 9837.769793] [2: irq/15-SSP_Int:
me=245 again=3 lux=60
<6>[ 9837.770040] [5:ssp_sensorhub_t:
skipped
<6>[ 9837.770170] I[7:SensorHubServic:
26, 1, 3, 126, 19, -68, 0, 0
<6>[ 9837.878952] I[0:
swapper/0:
ake is deasserted. release wakelock in
<6>[ 9838.127307] I[2: irq/15-SSP_Int:
26, 1, 3, 126, 21, 35, 1, 0
<6>[ 9838.127553] [5:ssp_sensorhub_t:
skipped
<6>[ 9838.127700] I[6:SensorHubServic:
26, 1, 3, 126, 21, 35, 1, 0
<6>[ 9838.297573] [6:SSRM Handler Th:
rate
<6>[ 9838.297603] [6:SSRM Handler Th:
<6>[ 9838.297617] [6:SSRM Handler Th:
<6>[ 9838.297922] [6:SSRM Handler Th:
<6>[ 9838.298244] [6:SSRM Handler Th:
<6>[ 9838.298551] [6:SSRM Handler Th:
report_rate,0:OK

1775] #>r=39 g=30 b=29 c=89 atime=245 aga


1783] wakeup source sensorhub activation
3439] [SSP] ssp_sensorhub_read(10): 1, 1,
5196] net_os_enable_packet_filter: val =
5196] net_os_rxfilter_add_remove: add_rem
5196] net_os_enable_packet_filter: val =
4604] [mhi_process_event_ring] MHI STE re
4605] [process_stt_work_item] Transitioni
4605] [process_M1_transition] Processing
4605] [process_M1_transition] Allowing tr
4605] [process_M1_transition] Starting M3
3442] [SSP] ssp_sensorhub_write(4): -72,
3442] [SSP] send_instruction: Inst = 0xb8
1775] [SSP] ssp_sensorhub_list(4): 1, 1,
1783] wakeup source sensorhub activation
3439] [SSP] ssp_sensorhub_read(4): 1, 1,
1775] [SSP] [M] #>r=40 g=31 b=31 c=91 ati
5196] CFG80211-TRACE) __wl_cfg80211_scan
1775] [SSP] ssp_sensorhub_list(10): 1, 1,
1775] [SSP] [M] #>r=41 g=32 b=32 c=94 ati
1783] wakeup source sensorhub activation
3439] [SSP] ssp_sensorhub_read(10): 1, 1,
0] [BT] update_host_wake_locked host_w
1s
1775] [SSP] ssp_sensorhub_list(10): 1, 1,
1783] wakeup source sensorhub activation
3439] [SSP] ssp_sensorhub_read(10): 1, 1,
9082] fts_touch 7-0049: COMMAND : report_
9082]
9082]
9082]
9082]
9082]

fts_touch
fts_touch
fts_touch
fts_touch
fts_touch

7-0049:
7-0049:
7-0049:
7-0049:
7-0049:

cmd = report_rate
cmd param 0= 0
report_rate: OK
tsp cmd: status:0
tsp cmd: result:

<6>[ 9838.350896] [0:wl_event_handle: 5324] CFG80211-TRACE) wl_escan_handler :


SCAN COMPLETED: scanned AP count=16
<6>[ 9838.406218] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [P] tID:0 tc:1 tm
:0
<6>[ 9838.419321] [0: thread_hotplug:14070] frequency info : 800000, prev_cmd 0
, exe_cmd 4
<6>[ 9838.419354] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9838.419373] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9838.532750] [7: kworker/u16:9:32452] [mhi_initiate_m3] Entered MHI state
4, Pending M0 0 Pending M3 0
<6>[ 9838.532776] [7: kworker/u16:9:32452] [mhi_initiate_m3] Triggering wake o
ut of M2
<6>[ 9838.539982] [2: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26940
<6>[ 9838.540023] [2: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9838.540168] [3:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9838.540193] [3:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9838.540217] [3:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9838.540955] [3:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9838.541000] [3: kworker/u16:9:32452] [mhi_initiate_m3] Cancelled M1 time
r, timer was active
<6>[ 9838.541145] [3: kworker/u16:9:32452] [mhi_initiate_m3] Waiting for M3 co
mpletion.
<6>[ 9838.544621] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [R] tID:0 mc: 11
tc:0 Ver[005683000]
<6>[ 9838.549940] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9838.550077] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 5
<6>[ 9838.550096] [2:MHI_STATE_THREA: 4605] [process_M3_transition] Processing
M3 state transition
<6>[ 9838.550131] [3: kworker/u16:9:32452] [mhi_initiate_m3] M3 completion rec
eived
<6>[ 9838.550156] [3: kworker/u16:9:32452] [mhi_turn_off_pcie_link] Entered...
<6>[ 9838.562682] [4: kworker/u16:9:32452] mhi 0000:01:00.0: [debug] pmcsr reg
: b dev->current_state : 0
<6>[ 9838.562826] [4: kworker/u16:9:32452] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9838.562909] [4: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: ack mes
sage is ok
<6>[ 9838.562931] [4: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: receive
d Enter_L23_READY DLLP packet
<6>[ 9838.562958] [4: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[ 9838.563065] [4: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<3>[ 9838.578528] I[6: surfaceflinger: 3350] [BT] set_wake_locked value = 0
<6>[ 9838.593043] [4: kworker/u16:9:32452] [mhi_turn_off_pcie_link] Exited...
<6>[ 9838.606026] I[2: irq/15-SSP_Int: 1775] [SSP] ssp_sensorhub_list(10): 1, 1,
26, 1, 3, 126, 23, 2, 1, 1
<6>[ 9838.606087] [5:ssp_sensorhub_t: 1783] wakeup source sensorhub activation
skipped
<6>[ 9838.606124] I[7:SensorHubServic: 3439] [SSP] ssp_sensorhub_read(10): 1, 1,
26, 1, 3, 126, 23, 2, 1, 1
<6>[ 9838.619206] [0: thread_hotplug:14070] frequency info : 1296000, prev_cmd
0, exe_cmd 4

<6>[ 9838.619228]
dm_hotplug disable
<6>[ 9838.619240]
<6>[ 9838.959313]
<6>[ 9838.959348]
<6>[ 9838.959363]
<6>[ 9838.959375]
<4>[ 9838.968558]
<4>[ 9838.976229]
<6>[ 9839.019192]
0, exe_cmd 4
<6>[ 9839.019213]
dm_hotplug disable
<6>[ 9839.019225]
<6>[ 9839.119308]
0, exe_cmd 4
<6>[ 9839.119336]
dm_hotplug disable
<6>[ 9839.119352]
<6>[ 9839.206092]
,0,0
<6>[ 9840.439743]
:0
<6>[ 9840.519270]
, exe_cmd 4
<6>[ 9840.519314]
dm_hotplug disable
<6>[ 9840.519347]
<6>[ 9840.531201]
c:0 Ver[005683000]
<6>[ 9840.541379]
<6>[ 9840.543112]
<6>[ 9840.543132]
<6>[ 9840.545740]
<6>[ 9840.550139]
<6>[ 9840.550625]
<6>[ 9840.619284]
0, exe_cmd 4
<6>[ 9840.619307]
dm_hotplug disable
<6>[ 9840.619319]
<6>[ 9840.715693]
:0
<6>[ 9840.719246]
0, exe_cmd 4
<6>[ 9840.719311]
dm_hotplug disable
<6>[ 9840.719331]
<6>[ 9840.808547]
c:0 Ver[005683000]
<6>[ 9840.812823]
<6>[ 9840.814254]
<6>[ 9840.814281]
<6>[ 9840.816754]
<6>[ 9840.819215]
0, exe_cmd 4
<6>[ 9840.819241]
dm_hotplug disable
<6>[ 9840.819257]
<6>[ 9840.821265]

[0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,


= 0
[0: thread_hotplug:14070] cluster1 cores hotplug out : 0
[0:
kworker/0:1:25228] sync_system +
[0:
kworker/0:1:25228] sync_system [0:
kworker/0:1:25228] sync_system +
[0:
kworker/0:1:25228] sync_system [0:
kworker/0:1:25228] Emergency Sync complete
[0:
kworker/0:0:13589] Emergency Sync complete
[0: thread_hotplug:14070] frequency info : 1296000, prev_cmd
[0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
= 0
[0: thread_hotplug:14070] cluster1 cores hotplug out : 0
[0: thread_hotplug:14070] frequency info : 1000000, prev_cmd
[0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
= 0
[0: thread_hotplug:14070] cluster1 cores hotplug out : 0
[2: irq/15-SSP_Int: 1775] [SSP] [M] AR-0,467,6437,5177,180,20
[1:irq/12-fts_touc: 1540] fts_touch 7-0049: [P] tID:0 tc:1 tm
[0: thread_hotplug:14070] frequency info : 800000, prev_cmd 0
[0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
= 0
[0: thread_hotplug:14070] cluster1 cores hotplug out : 0
[1:irq/12-fts_touc: 1540] fts_touch 7-0049: [R] tID:0 mc: 7 t
[5:
[7:
[7:
[4:
[6:
[5:
[0:

kworker/u16:15:32536]
kworker/u16:15:32536]
kworker/u16:15:32536]
kworker/u16:15:32536]
kworker/u16:15:32536]
kworker/u16:15:32536]
thread_hotplug:14070]

[VIB] haptic_work
[VIB] haptic_work
[VIB] max77843_haptic_i2c 1
regulator_enable returns 0
[VIB] haptic_work
[VIB] max77843_haptic_i2c 0
frequency info : 1296000, prev_cmd

[0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,


= 0
[0: thread_hotplug:14070] cluster1 cores hotplug out : 0
[1:irq/12-fts_touc: 1540] fts_touch 7-0049: [P] tID:0 tc:1 tm
[0: thread_hotplug:14070] frequency info : 1296000, prev_cmd
[0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
= 0
[0: thread_hotplug:14070] cluster1 cores hotplug out : 0
[1:irq/12-fts_touc: 1540] fts_touch 7-0049: [R] tID:0 mc: 7 t
[6:
[4:
[4:
[6:
[0:

kworker/u16:15:32536]
kworker/u16:15:32536]
kworker/u16:15:32536]
kworker/u16:15:32536]
thread_hotplug:14070]

[VIB] haptic_work
[VIB] haptic_work
[VIB] max77843_haptic_i2c 1
regulator_enable returns 0
frequency info : 1000000, prev_cmd

[0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,


= 0
[0: thread_hotplug:14070] cluster1 cores hotplug out : 0
[6: kworker/u16:15:32536] [VIB] haptic_work

<6>[ 9840.821758] [5: kworker/u16:15:32536] [VIB] max77843_haptic_i2c 0


<6>[ 9840.919195] [0: thread_hotplug:14070] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[ 9840.919217] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9840.919229] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9841.028568] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [P] tID:0 tc:1 tm
:0
<6>[ 9841.081366] I[0:
swapper/0:
0] exynos-pcie 10ee0000.pcie0: cp2ap_w
ake irq involked
<6>[ 9841.081423] [0:
kworker/0:0:13589] exynos-pcie 10ee0000.pcie0: PCIe: W
ake work for RC0
<6>[ 9841.081450] [0:
kworker/0:0:13589] exynos-pcie 10ee0000.pcie0: Callbac
k for the event : 4
<6>[ 9841.081468] [0:
kworker/0:0:13589] [mhi_link_state_cb] Received MSM_PC
IE_EVENT_WAKE
<6>[ 9841.081537] [5:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 10
<6>[ 9841.081558] [5:MHI_STATE_THREA: 4605] [process_WAKE_transition] Entered
<6>[ 9841.081576] [5:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[ 9841.081594] [5:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, start of poweron, pcie state: 0
<6>[ 9841.109194] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [R] tID:0 mc: 6 t
c:0 Ver[005683000]
<6>[ 9841.114155] [7: kworker/u16:9:32452] [VIB] haptic_work
<6>[ 9841.117245] [7: kworker/u16:9:32452] [VIB] haptic_work
<6>[ 9841.117313] [7: kworker/u16:9:32452] [VIB] max77843_haptic_i2c 1
<6>[ 9841.119242] [0: thread_hotplug:14070] frequency info : 1000000, prev_cmd
0, exe_cmd 4
<6>[ 9841.119269] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9841.119284] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9841.119629] [6:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: D state
: 0, ccba00
<6>[ 9841.120060] [6: kworker/u16:9:32452] regulator_enable returns 0
<6>[ 9841.124168] [4: kworker/u16:9:32452] [VIB] haptic_work
<6>[ 9841.124649] [4: kworker/u16:9:32452] [VIB] max77843_haptic_i2c 0
<6>[ 9841.137196] [4:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_reset: Link up : 0x03134211
<6>[ 9841.137574] [4:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, end of poweron, pcie state: 3
<6>[ 9841.149440] [6:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] pmcsr reg
: 8 dev->current_state : 3
<6>[ 9841.149616] [6:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9841.149633] [6:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
y for the link of RC0
<6>[ 9841.149648] [6:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
config space of RC0 and its EP
<6>[ 9841.149660] [6:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
RC0
<6>[ 9841.149702] [6:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
EP of RC0
<6>[ 9841.150081] [6:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Refresh
ing the saved config space in PCI framework for RC0 and its EP
<6>[ 9841.155536] [6:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[ 9841.155558] [6:MHI_STATE_THREA: 4605] [process_WAKE_transition] MHI is in
itialized, transitioning to M0.
<6>[ 9841.155573] [6:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Entered MHI state
5, Pending M0 0 Pending M3 0

<6>[ 9841.155588] [6:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Waiting for M0 M1


or M3. Currently 5...
<6>[ 9841.155601] [6:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Wait complete sta
te: 5
<6>[ 9841.155614] [6:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[ 9841.155626] [6:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[ 9841.155638] [6:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Setting M0 ...
<6>[ 9841.155686] [6:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Exited...
<6>[ 9841.155699] [6:MHI_STATE_THREA: 4605] [process_WAKE_transition] Exited.
<6>[ 9841.159971] [4: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 5 link 1, ring type 2, index 0 db 0x5fa26960
<6>[ 9841.160051] [4: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9841.160226] [6:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9841.160251] [6:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9841.160271] [6:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9841.160887] [6:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9841.164036] [7:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 8e 17 51 00 0e 00 14 06 00
<6>[ 9841.165890] [6:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 57 19 4f 00 00 00
<6>[ 9841.178322] [7:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 57 19 4f 00 15 00 02 04 00
<6>[ 9841.201697] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [P] tID:0 tc:1 tm
:0
<6>[ 9841.219221] [0: thread_hotplug:14070] frequency info : 1000000, prev_cmd
0, exe_cmd 4
<6>[ 9841.219251] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9841.219267] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9841.305347] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [R] tID:0 mc: 8 t
c:0 Ver[005683000]
<6>[ 9841.309628] [4: kworker/u16:9:32452] [VIB] haptic_work
<6>[ 9841.310902] [6: kworker/u16:9:32452] [VIB] haptic_work
<6>[ 9841.310922] [6: kworker/u16:9:32452] [VIB] max77843_haptic_i2c 1
<6>[ 9841.313271] [7: kworker/u16:9:32452] regulator_enable returns 0
<6>[ 9841.317933] [6: kworker/u16:9:32452] [VIB] haptic_work
<6>[ 9841.318601] [4: kworker/u16:9:32452] [VIB] max77843_haptic_i2c 0
<6>[ 9841.387263] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9841.387458] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[ 9841.387483] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[ 9841.387504] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9841.387698] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[ 9841.419253] [0: thread_hotplug:14070] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[ 9841.419277] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9841.419289] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9841.560663] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [P] tID:0 tc:1 tm
:0
<6>[ 9841.619250] [0: thread_hotplug:14070] frequency info : 800000, prev_cmd 0
, exe_cmd 4
<6>[ 9841.619283] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,

dm_hotplug disable = 0
<6>[ 9841.619302] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9841.629999] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [R] tID:0 mc: 5 t
c:0 Ver[005683000]
<6>[ 9841.631802] [4: kworker/u16:9:32452] [VIB] haptic_work
<6>[ 9841.633283] [4: kworker/u16:9:32452] [VIB] haptic_work
<6>[ 9841.633302] [4: kworker/u16:9:32452] [VIB] max77843_haptic_i2c 1
<6>[ 9841.635341] [4: kworker/u16:9:32452] regulator_enable returns 0
<6>[ 9841.640311] [5: kworker/u16:9:32452] [VIB] haptic_work
<6>[ 9841.640764] [5: kworker/u16:9:32452] [VIB] max77843_haptic_i2c 0
<6>[ 9841.719439] [0: thread_hotplug:14070] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[ 9841.719462] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9841.719474] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9841.795999] [3:
mc_log: 3354] MobiCore mcd: f01|TL_TZ_KEYSTORE: S
tarting
<6>[ 9841.799283] [1:
mc_log: 3354] MobiCore mcd: f01|TL_TZ_KEYSTORE: G
ot a message!
<6>[ 9841.799305] [1:
mc_log: 3354] MobiCore mcd: f01|TZ_KEYSTORE: we g
ot a command
<6>[ 9841.799318] [1:
mc_log: 3354] MobiCore mcd: f01|TZ_KEYSTORE: proc
ess_cmd: CMD_TZ_KEYSTORE_init:
<6>[ 9841.802602] [1:
mc_log: 3354] MobiCore mcd: f01|TIMA trustlet: g
et_sec_TIMA_address tima_sec_mem_addr : FE800000
<6>[ 9841.802624] [1:
mc_log: 3354] MobiCore mcd: 501|drTima: processin
g TIMA_DRIVER_PHYS_MEM_ACCESS_COPY
<6>[ 9841.802637] [1:
mc_log: 3354] MobiCore mcd: 501|drTima: data_len
= 32 = 0x20
<6>[ 9841.802649] [1:
mc_log: 3354] MobiCore mcd: 501|drTima: PHYS_READ
<6>[ 9841.802663] [1:
mc_log: 3354] MobiCore mcd: f01|TIMA trustlet: wa
rranty violation detected 18
<6>[ 9841.802675] [1:
mc_log: 3354] MobiCore mcd: f01|TZ_COMMON: Initia
lize failed - tamper fuse set
<6>[ 9841.802689] [1:
mc_log: 3354] MobiCore mcd: f01|Trustlet TL_TZ_KE
YSTORE: sendmsg->header.id = 0x00000001
<6>[ 9841.802703] [1:
mc_log: 3354] MobiCore mcd: f01|Trustlet TL_TZ_KE
YSTORE: respmsg->header.id = 0x80000001
<6>[ 9841.802718] [1:
mc_log: 3354] MobiCore mcd: f01|Trustlet TL_TZ_KE
YSTORE: respmsg->header.status = 0x00000000
<6>[ 9841.803076] [1:
mc_log: 3354] MobiCore mcd: f01|TL_TZ_KEYSTORE: R
eturning = 0x00000000
<6>[ 9841.812611] [1:
mc_log: 3354] MobiCore mcd: 104| SMGNT send MSG_C
LOSE_TRUSTLET for thread f01 to IPCH
<6>[ 9841.812639] [1:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 202 (UUID=02010000-0000-0000-0000-000000005000) (server 0/8 status i
s 00000001)
<6>[ 9841.815913] [1:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 302 (UUID=ffffffff-0000-0000-0000-000000000002) (server 1/8 status i
s 00000001)
<6>[ 9841.815940] [1:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 402 (UUID=ffffffff-0000-0000-0000-000000000001) (server 2/8 status i
s 00000001)
<6>[ 9841.819260] [1:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 501 (UUID=ffffffff-d000-0000-0000-00000000000a) (server 3/8 status i
s 00000001)
<6>[ 9841.819286] [1:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 602 (UUID=ffffffff-d000-0000-0000-000000000016) (server 4/8 status i
s 00000001)
<6>[ 9841.821838] [1:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se

nd Event to 702 (UUID=07050500-0000-0000-0000-000000000000) (server 5/8 status i


s 00000001)
<6>[ 9841.821862] [1:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to b02 (UUID=ffffffff-d000-0000-0000-00000000000e) (server 6/8 status i
s 00000001)
<6>[ 9841.825901] [1:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 902 (UUID=ffffffff-d000-0000-0000-000000000014) (server 7/8 status i
s 00000001)
<6>[ 9841.829340] [1:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop do
ne
<6>[ 9841.829362] [1:
mc_log: 3354] MobiCore mcd: 501|drTima: MSG_CLOSE
_TRUSTLET call 0x40001
<6>[ 9841.829377] [1:
mc_log: 3354] MobiCore mcd: b02|Driver SPI receiv
es MSG_CLOSE_TRUSTLET[0x00040001, 0x0001000f]
<6>[ 9841.829723] [3:
mc_log: 3354] MobiCore mcd: 104| SMGNT smgntClose
Session done
<6>[ 9841.846092] [1:
mc_log: 3354] MobiCore mcd: 104| SMGNT send MSG_C
LOSE_TRUSTLET for thread e01 to IPCH
<6>[ 9841.846120] [1:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 202 (UUID=02010000-0000-0000-0000-000000005000) (server 0/8 status i
s 00000001)
<6>[ 9841.849285] [1:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 302 (UUID=ffffffff-0000-0000-0000-000000000002) (server 1/8 status i
s 00000001)
<6>[ 9841.849313] [1:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 402 (UUID=ffffffff-0000-0000-0000-000000000001) (server 2/8 status i
s 00000001)
<6>[ 9841.852555] [1:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 501 (UUID=ffffffff-d000-0000-0000-00000000000a) (server 3/8 status i
s 00000001)
<6>[ 9841.852582] [1:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 602 (UUID=ffffffff-d000-0000-0000-000000000016) (server 4/8 status i
s 00000001)
<6>[ 9841.856484] [1:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 702 (UUID=07050500-0000-0000-0000-000000000000) (server 5/8 status i
s 00000001)
<6>[ 9841.856514] [1:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to b02 (UUID=ffffffff-d000-0000-0000-00000000000e) (server 6/8 status i
s 00000001)
<6>[ 9841.859249] [1:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 902 (UUID=ffffffff-d000-0000-0000-000000000014) (server 7/8 status i
s 00000001)
<6>[ 9841.859273] [1:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop do
ne
<6>[ 9841.862659] [1:
mc_log: 3354] MobiCore mcd: 501|drTima: MSG_CLOSE
_TRUSTLET call 0x40001
<6>[ 9841.862685] [1:
mc_log: 3354] MobiCore mcd: b02|Driver SPI receiv
es MSG_CLOSE_TRUSTLET[0x00040001, 0x0001000e]
<6>[ 9841.863096] [3:
mc_log: 3354] MobiCore mcd: 104| SMGNT smgntClose
Session done
<3>[ 9841.874545] [5:
sdp_cryptod: 3516] MobiCore mcd: closed by PID(3516),
name(sdp_cryptod)
<4>[ 9841.885720] [1:
Thread-1070:14139] KEK_PACK[14139] add_kek :: entered
<4>[ 9841.885739] [1:
Thread-1070:14139] KEK_PACK[14139] find_kek_pack :: Fo
und kek-pack : 0
<4>[ 9841.885754] [1:
Thread-1070:14139] KEK_PACK[14139] find_kek_item :: Ca
n't find kek 10 : 0
<4>[ 9841.885770] [1:
Thread-1070:14139] KEK_PACK[14139] __add_kek :: item f
fffffc0364f9400
<4>[ 9841.885782] [1:
Thread-1070:14139] KEK_PACK[14139] add_kek :: entered

<4>[ 9841.885793]
und kek-pack : 0
<4>[ 9841.885806]
n't find kek 12 :
<4>[ 9841.885852]
fffffc0364f9000
<4>[ 9841.885864]
<4>[ 9841.885875]
und kek-pack : 0
<4>[ 9841.885888]
n't find kek 14 :
<4>[ 9841.885904]
fffffc0480ea400
<4>[ 9841.885917]
<4>[ 9841.885929]
und kek-pack : 0
<4>[ 9841.885942]
n't find kek 16 :
<4>[ 9841.885954]
fffffc0480ea000
<6>[ 9842.054900]
INT
<6>[ 9842.054926]
<6>[ 9842.071863]
ndId :a
<6>[ 9842.071886]
: 373 : 25
<6>[ 9842.082132]
: 387
<6>[ 9842.082157]
pture.c 63 4
<6>[ 9842.082172]
pture.c 522 4
<6>[ 9842.082186]
re.c 1099 4
<6>[ 9842.082200]
rDevice.c 464 4
<6>[ 9842.089326]
otocol.c 843 4
<6>[ 9842.092656]
otocol.c 887 4
<6>[ 9842.092681]
rDevice.c 552 4
<6>[ 9842.095990]
otocol.c 1301 4
<6>[ 9842.096014]
c 1143 4
<6>[ 9842.098643]
.c 921 4
<6>[ 9842.098670]
.c 1184 4
<6>[ 9842.098684]
.c 263 4
<6>[ 9842.098697]
.c 278 4
<6>[ 9842.098711]
c 1775 4
<6>[ 9842.098725]
.c 263 4
<6>[ 9842.098738]

[1:

Thread-1070:14139] KEK_PACK[14139] find_kek_pack :: Fo

[1:

Thread-1070:14139] KEK_PACK[14139] find_kek_item :: Ca

0
[1:

Thread-1070:14139] KEK_PACK[14139] __add_kek :: item f

[1:
[1:

Thread-1070:14139] KEK_PACK[14139] add_kek :: entered


Thread-1070:14139] KEK_PACK[14139] find_kek_pack :: Fo

[1:

Thread-1070:14139] KEK_PACK[14139] find_kek_item :: Ca

0
[1:

Thread-1070:14139] KEK_PACK[14139] __add_kek :: item f

[1:
[1:

Thread-1070:14139] KEK_PACK[14139] add_kek :: entered


Thread-1070:14139] KEK_PACK[14139] find_kek_pack :: Fo

[1:

Thread-1070:14139] KEK_PACK[14139] find_kek_item :: Ca

0
[1:

Thread-1070:14139] KEK_PACK[14139] __add_kek :: item f

[1:

fingerprintd:14086] vfsspi_ioctl VFSSPI_IOCTL_SET_DRDY_

[1:
[0:

fingerprintd:14086] vfsspi_disableIrq
mc_log: 3354] MobiCore mcd: d01|FINGERPRINT comma

[0:

mc_log: 3354] MobiCore mcd: d01|[FPLOG]vigis_api

[0:

mc_log: 3354] MobiCore mcd: d01|[FPLOG]vigis_api

[0:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: synaFpCa

[0:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: synaFpCa

[0:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: vfmCaptu

[0:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: scsSenso

[0:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: palSpiPr

[1:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: palSpiPr

[1:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: scsSenso

[1:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: palSpiPr

[1:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: irDliRT.

[1:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: vcsIRApi

[1:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: vcsIRApi

[1:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: vcsImage

[1:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: vcsImage

[1:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: irDliRT.

[1:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: vcsImage

[1:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: vcsImage

.c 278 4
<6>[ 9842.100597] [1:
mc_log: 3354] MobiCore mcd: d01|SYNAFP: irDliRT.
c 1818 4
<6>[ 9842.100618] [1:
mc_log: 3354] MobiCore mcd: d01|SYNAFP: irDliRT.
c 1178 4
<6>[ 9842.100632] [1:
mc_log: 3354] MobiCore mcd: d01|SYNAFP: vfmCaptu
re.c 133 4
<6>[ 9842.100646] [1:
mc_log: 3354] MobiCore mcd: d01|SYNAFP: vfmCaptu
re.c 1138 4
<6>[ 9842.100659] [1:
mc_log: 3354] MobiCore mcd: d01|SYNAFP: synaFpCa
pture.c 544 4
<6>[ 9842.100673] [1:
mc_log: 3354] MobiCore mcd: d01|Trustlet Fingerpr
int::Returning 0
<6>[ 9842.100783] [3: fingerprintd:14086] vfsspi_ioctl VFSSPI_IOCTL_SET_DRDY_
INT
<6>[ 9842.100801] [3: fingerprintd:14086] vfsspi_disableIrq
<3>[ 9842.100814] [3: fingerprintd:14086] vfsspi_disableIrq DRDY irq already
disabled
<6>[ 9842.100873] [3: fingerprintd:14086] vfsspi_ioctl VFSSPI_IOCTL_SET_LOCKS
CREEN :OFF
<6>[ 9842.319254] [0: thread_hotplug:14070] frequency info : 1500000, prev_cmd
4, exe_cmd 0
<6>[ 9842.319276] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9842.319287] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9842.326065] [1:
mc_log: 3354] MobiCore mcd: e01|ccccccccccccccccc
cccccccccTL_TZ_CCM: tciBufferLen = 38912 = 0x9800
<6>[ 9842.326085] [1:
mc_log: 3354] MobiCore mcd: e01|Trustlet TL_TZ_CC
M: Starting
<6>[ 9842.326867] [1:
mc_log: 3354] MobiCore mcd: e01|TL_TZ_CCM: tciBuf
ferLen = 38912 = 0x9800
<6>[ 9842.326890] [1:
mc_log: 3354] MobiCore mcd: e01|TL_TZ_CCM: sendms
g envelope length = 19456 = 0x4c00
<6>[ 9842.329286] [1:
mc_log: 3354] MobiCore mcd: e01|TL_TZ_CCM: sendms
g = 00092c80, respmsg = 0009785c
<6>[ 9842.329308] [1:
mc_log: 3354] MobiCore mcd: e01|Trustlet TL_TZ_CC
M: Got a message!
<6>[ 9842.329320] [1:
mc_log: 3354] MobiCore mcd: e01|TZ_CCM: we got a
command
<6>[ 9842.329333] [1:
mc_log: 3354] MobiCore mcd: e01|TZ_CCM: process_c
md: CMD_TZ_CCM_C_Initialize:
<6>[ 9842.329345] [1:
mc_log: 3354] MobiCore mcd: e01|TIMA trustlet: Re
ading knox license status
<6>[ 9842.329358] [1:
mc_log: 3354] MobiCore mcd: e01|TIMA trustlet: g
et_sec_TIMA_address tima_sec_mem_addr : FE800000
<6>[ 9842.336577] [1:
mc_log: 3354] MobiCore mcd: 501|drTima: processin
g TIMA_DRIVER_PHYS_MEM_ACCESS_COPY
<6>[ 9842.336600] [1:
mc_log: 3354] MobiCore mcd: 501|drTima: data_len
= 4 = 0x4
<6>[ 9842.336612] [1:
mc_log: 3354] MobiCore mcd: 501|drTima: PHYS_READ
<6>[ 9842.336623] [1:
mc_log: 3354] MobiCore mcd: e01|read license stat
us is: 0
<6>[ 9842.336635] [1:
mc_log: 3354] MobiCore mcd: e01|low security mode
<6>[ 9842.336648] [1:
mc_log: 3354] MobiCore mcd: 501|drTima: processin
g TIMA_DRIVER_PHYS_MEM_ACCESS_COPY
<6>[ 9842.339066] [1:
mc_log: 3354] MobiCore mcd: 501|drTima: data_len
= 32 = 0x20
<6>[ 9842.339086] [1:
mc_log: 3354] MobiCore mcd: 501|drTima: PHYS_READ
<6>[ 9842.339099] [1:
mc_log: 3354] MobiCore mcd: e01|TIMA trustlet: wa
rranty violation detected 18

<6>[ 9842.339111] [1:


mc_log: 3354] MobiCore mcd: e01|TZ_COMMON: Initia
lize failed - tamper fuse set
<6>[ 9842.339124] [1:
mc_log: 3354] MobiCore mcd: e01|TL_TZ_CCM: TL CCM
general initialization failure
<6>[ 9842.339136] [1:
mc_log: 3354] MobiCore mcd: e01|Trustlet TL_TZ_CC
M: sendmsg->header.id = 0x00000002
<6>[ 9842.339230] [1:
mc_log: 3354] MobiCore mcd: e01|Trustlet TL_TZ_CC
M: respmsg->header.id = 0x80000002
<6>[ 9842.339246] [1:
mc_log: 3354] MobiCore mcd: e01|Trustlet TL_TZ_CC
M: respmsg->header.status = 0x00000000
<6>[ 9842.339259] [1:
mc_log: 3354] MobiCore mcd: e01|Trustlet TL_TZ_CC
M: Returning = 0x00000000
<6>[ 9842.342609] [1:
mc_log: 3354] MobiCore mcd: 104| SMGNT send MSG_C
LOSE_TRUSTLET for thread e01 to IPCH
<6>[ 9842.345999] [1:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 202 (UUID=02010000-0000-0000-0000-000000005000) (server 0/8 status i
s 00000001)
<6>[ 9842.346024] [1:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 302 (UUID=ffffffff-0000-0000-0000-000000000002) (server 1/8 status i
s 00000001)
<6>[ 9842.349316] [1:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 402 (UUID=ffffffff-0000-0000-0000-000000000001) (server 2/8 status i
s 00000001)
<6>[ 9842.349343] [1:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 501 (UUID=ffffffff-d000-0000-0000-00000000000a) (server 3/8 status i
s 00000001)
<6>[ 9842.352624] [1:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 602 (UUID=ffffffff-d000-0000-0000-000000000016) (server 4/8 status i
s 00000001)
<6>[ 9842.352649] [1:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 702 (UUID=07050500-0000-0000-0000-000000000000) (server 5/8 status i
s 00000001)
<6>[ 9842.356029] [1:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to b02 (UUID=ffffffff-d000-0000-0000-00000000000e) (server 6/8 status i
s 00000001)
<6>[ 9842.356057] [1:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 902 (UUID=ffffffff-d000-0000-0000-000000000014) (server 7/8 status i
s 00000001)
<6>[ 9842.356070] [1:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop do
ne
<6>[ 9842.359046] [1:
mc_log: 3354] MobiCore mcd: 501|drTima: MSG_CLOSE
_TRUSTLET call 0x40001
<6>[ 9842.359071] [1:
mc_log: 3354] MobiCore mcd: b02|Driver SPI receiv
es MSG_CLOSE_TRUSTLET[0x00040001, 0x0001000e]
<6>[ 9842.359084] [1:
mc_log: 3354] MobiCore mcd: 104| SMGNT smgntClose
Session done
<6>[ 9842.366858] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa269b0
<6>[ 9842.366882] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9842.366911] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9842.366926] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9842.366940] [2:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work was
cancelled
<6>[ 9842.367554] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<3>[ 9842.371595] [2:
tlc_server: 5103] MobiCore mcd: closed by PID(5103),
name(tlc_server)
<6>[ 9842.371607] [1:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 8f 17 51 00 0e 00 14 06 00

<6>[ 9842.372956] [2:


qmuxd: 3399]
00 00 03 01 00 58 19 4f 00 00 00
<6>[ 9842.384016] [3:
qmuxd: 4756]
00 80 03 01 02 58 19 4f 00 15 00 02 04 00
<6>[ 9842.419395] [0: thread_hotplug:14070]
0, exe_cmd 4
<6>[ 9842.419422] [0: thread_hotplug:14070]
dm_hotplug disable = 0
<6>[ 9842.419436] [0: thread_hotplug:14070]
<6>[ 9842.593155] [1: MHI_EV_THREAD: 4604]
ceived ring 0x0
<6>[ 9842.593442] [2:MHI_STATE_THREA: 4605]
ng to 3
<6>[ 9842.593496] [2:MHI_STATE_THREA: 4605]
M1 state transition from state 3
<6>[ 9842.593555] [2:MHI_STATE_THREA: 4605]
ansition to M2
<6>[ 9842.593791] [2:MHI_STATE_THREA: 4605]
deferred work
<6>[ 9842.629581] [2:
mc_log: 3354]
ndId :c
<6>[ 9842.632928] [2:
mc_log: 3354]
opcode : 30
<6>[ 9842.659441] [3:
mc_log: 3354]
: 600
<6>[ 9842.659478] [3:
mc_log: 3354]
106 4
<6>[ 9842.659498] [3:
mc_log: 3354]
e.c 114 4
<6>[ 9842.659519] [3:
mc_log: 3354]
rDevice.c 271 4
<6>[ 9842.659539] [3:
mc_log: 3354]
rDevice.c 164 4
<6>[ 9842.662680] [3:
mc_log: 3354]
spi_exit
<6>[ 9842.662713] [3:
mc_log: 3354]
e.c 274 4
<6>[ 9842.662732] [3:
mc_log: 3354]
.c 263 4
<6>[ 9842.662752] [3:
mc_log: 3354]
.c 64 3
<6>[ 9842.662772] [3:
mc_log: 3354]
.c 278 4
<6>[ 9842.662792] [3:
mc_log: 3354]
e.c 344 4
<6>[ 9842.662811] [3:
mc_log: 3354]
e.c 141 4
<6>[ 9842.662831] [3:
mc_log: 3354]
c 177 4
<6>[ 9842.662850] [3:
mc_log: 3354]
c 198 4
<6>[ 9842.680363] [3:
mc_log: 3354]
int::Returning 0
<6>[ 9842.699415] [1:
mc_log: 3354]
LOSE_DRIVER for thread b02 to IPCH
<6>[ 9842.699476] [1:
mc_log: 3354]
es MSG_CLOSE_DRIVER[0x00040001, 0x00000000]
<6>[ 9842.703000] [2:
mc_log: 3354]
LOSE_TRUSTLET for thread b02 to IPCH
<6>[ 9842.706071] [2:
mc_log: 3354]

[mhi_uci_dump_log] uci_write: 01 0c
[mhi_uci_dump_log] uci_read: 01 21
frequency info : 1104000, prev_cmd
lcd is on : 1, low power mode = 0,
cluster1 cores hotplug out : 0
[mhi_process_event_ring] MHI STE re
[process_stt_work_item] Transitioni
[process_M1_transition] Processing
[process_M1_transition] Allowing tr
[process_M1_transition] Starting M3
MobiCore mcd: d01|FINGERPRINT comma
MobiCore mcd: d01|do_extra_control
MobiCore mcd: d01|[FPLOG]vigis_api
MobiCore mcd: d01|SYNAFP: synaFp.c
MobiCore mcd: d01|SYNAFP: vfmDevic
MobiCore mcd: d01|SYNAFP: scsSenso
MobiCore mcd: d01|SYNAFP: scsSenso
MobiCore mcd: b02|[Secure SPI] sec_
MobiCore mcd: d01|SYNAFP: vfmDevic
MobiCore mcd: d01|SYNAFP: vcsImage
MobiCore mcd: d01|SYNAFP: vcsImage
MobiCore mcd: d01|SYNAFP: vcsImage
MobiCore mcd: d01|SYNAFP: vfmDevic
MobiCore mcd: d01|SYNAFP: vfmDevic
MobiCore mcd: d01|SYNAFP: vfmInit.
MobiCore mcd: d01|SYNAFP: vfmInit.
MobiCore mcd: d01|Trustlet Fingerpr
MobiCore mcd: 104| SMGNT send MSG_C
MobiCore mcd: b02|Driver SPI receiv
MobiCore mcd: 104| SMGNT send MSG_C
MobiCore mcd: 103|BroadCast loop se

nd Event to 202 (UUID=02010000-0000-0000-0000-000000005000) (server 0/8 status i


s 00000001)
<6>[ 9842.706147] [2:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 302 (UUID=ffffffff-0000-0000-0000-000000000002) (server 1/8 status i
s 00000001)
<6>[ 9842.709366] [2:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 402 (UUID=ffffffff-0000-0000-0000-000000000001) (server 2/8 status i
s 00000001)
<6>[ 9842.712990] [0:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 501 (UUID=ffffffff-d000-0000-0000-00000000000a) (server 3/8 status i
s 00000001)
<6>[ 9842.713095] [0:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 602 (UUID=ffffffff-d000-0000-0000-000000000016) (server 4/8 status i
s 00000001)
<6>[ 9842.716197] [0:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 702 (UUID=07050500-0000-0000-0000-000000000000) (server 5/8 status i
s 00000001)
<6>[ 9842.719454] [0:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to b02 (UUID=ffffffff-d000-0000-0000-00000000000e) (server 6/8 status i
s 00000000)
<6>[ 9842.719497] [0:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 902 (UUID=ffffffff-d000-0000-0000-000000000014) (server 7/8 status i
s 00000001)
<6>[ 9842.719517] [0:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop do
ne
<6>[ 9842.722028] [2:
mc_log: 3354] MobiCore mcd: 501|drTima: MSG_CLOSE
_TRUSTLET call 0x40001
<6>[ 9842.722062] [2:
mc_log: 3354] MobiCore mcd: 104| SMGNT smgntClose
Session done
<6>[ 9842.726181] [0:
mc_log: 3354] MobiCore mcd: 104| SMGNT send MSG_C
LOSE_TRUSTLET for thread d01 to IPCH
<6>[ 9842.726226] [0:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 202 (UUID=02010000-0000-0000-0000-000000005000) (server 0/7 status i
s 00000001)
<6>[ 9842.729342] [0:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 302 (UUID=ffffffff-0000-0000-0000-000000000002) (server 1/7 status i
s 00000001)
<6>[ 9842.729372] [0:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 402 (UUID=ffffffff-0000-0000-0000-000000000001) (server 2/7 status i
s 00000001)
<6>[ 9842.732761] [0:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 501 (UUID=ffffffff-d000-0000-0000-00000000000a) (server 3/7 status i
s 00000001)
<6>[ 9842.732806] [0:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 602 (UUID=ffffffff-d000-0000-0000-000000000016) (server 4/7 status i
s 00000001)
<6>[ 9842.736087] [0:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 702 (UUID=07050500-0000-0000-0000-000000000000) (server 5/7 status i
s 00000001)
<6>[ 9842.739086] [1:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 902 (UUID=ffffffff-d000-0000-0000-000000000014) (server 7/7 status i
s 00000001)
<6>[ 9842.739112] [1:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop do
ne
<6>[ 9842.739132] [1:
mc_log: 3354] MobiCore mcd: 501|drTima: MSG_CLOSE
_TRUSTLET call 0x40001
<6>[ 9842.739201] [1:
mc_log: 3354] MobiCore mcd: 104| SMGNT smgntClose
Session done
<3>[ 9842.750882] [1: POSIX timer 0: 6378] MobiCore mcd: closed by PID(6378),
name(POSIX timer 0)

<6>[ 9842.751108] [1: POSIX timer 0: 6378] vfsspi_suspend


<6>[ 9842.751169] [1: POSIX timer 0: 6378] vfsspi_ioctl_disable_spi_clock DISA
BLE_SPI_CLOCK
<6>[ 9843.335924] [2: irq/15-SSP_Int: 1775] [SSP] [M] AR-0,647,6530,4803,180,20
,0,0
<6>[ 9843.596109] [3: kworker/u16:9:32452] [mhi_initiate_m3] Entered MHI state
4, Pending M0 0 Pending M3 0
<6>[ 9843.596152] [3: kworker/u16:9:32452] [mhi_initiate_m3] Triggering wake o
ut of M2
<6>[ 9843.598086] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26a00
<6>[ 9843.598126] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9843.598305] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9843.598335] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9843.598356] [2:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9843.599061] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9843.599204] [3: kworker/u16:9:32452] [mhi_initiate_m3] Cancelled M1 time
r, timer was active
<6>[ 9843.599255] [3: kworker/u16:9:32452] [mhi_initiate_m3] Waiting for M3 co
mpletion.
<6>[ 9843.607971] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9843.608136] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 5
<6>[ 9843.608160] [2:MHI_STATE_THREA: 4605] [process_M3_transition] Processing
M3 state transition
<6>[ 9843.608292] [3: kworker/u16:9:32452] [mhi_initiate_m3] M3 completion rec
eived
<6>[ 9843.608327] [3: kworker/u16:9:32452] [mhi_turn_off_pcie_link] Entered...
<6>[ 9843.619608] [3: kworker/u16:9:32452] mhi 0000:01:00.0: [debug] pmcsr reg
: b dev->current_state : 0
<6>[ 9843.619804] [3: kworker/u16:9:32452] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9843.619919] [3: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: ack mes
sage is ok
<6>[ 9843.619965] [3: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: receive
d Enter_L23_READY DLLP packet
<6>[ 9843.620021] [3: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[ 9843.620194] [3: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[ 9843.645683] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [P] tID:0 tc:1 tm
:0
<6>[ 9843.652941] [6: kworker/u16:9:32452] [mhi_turn_off_pcie_link] Exited...
<6>[ 9843.732602] [0: thread_hotplug:14070] frequency info : 800000, prev_cmd 0
, exe_cmd 4
<6>[ 9843.732637] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9843.732656] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9843.795705] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [R] tID:0 mc: 12
tc:0 Ver[005683000]
<6>[ 9843.832574] [0: thread_hotplug:14070] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[ 9843.832594] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9843.832606] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9843.843230] [4:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c

00 00 03 01 00 59 19 43 00 00 00
<6>[ 9843.843267] [4:
qmuxd: 3399] [mhi_wake_dev_from_m3] Initiating M
0 work...
<6>[ 9843.843290] [5: kworker/u16:9:32452] [m0_work] No pending resume, initia
ting M0.
<6>[ 9843.843305] [5: kworker/u16:9:32452] [mhi_initiate_m0] Entered MHI state
5, Pending M0 0 Pending M3 0
<6>[ 9843.843318] [5: kworker/u16:9:32452] [mhi_initiate_m0] Waiting for M0 M1
or M3. Currently 5...
<6>[ 9843.843328] [5: kworker/u16:9:32452] [mhi_initiate_m0] Wait complete sta
te: 5
<6>[ 9843.843338] [5: kworker/u16:9:32452] [mhi_turn_on_pcie_link] Entered...
<6>[ 9843.843351] [5: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, start of poweron, pcie state: 0
<6>[ 9843.882895] [6: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: D state
: 0, 111c00
<6>[ 9843.906744] [6: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: exynos_
pcie_reset: Link up : 0x035ece11
<6>[ 9843.907090] [6: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, end of poweron, pcie state: 3
<6>[ 9843.919421] [6: kworker/u16:9:32452] mhi 0000:01:00.0: [debug] pmcsr reg
: 8 dev->current_state : 3
<6>[ 9843.919602] [6: kworker/u16:9:32452] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9843.919615] [6: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: Recover
y for the link of RC0
<6>[ 9843.919625] [6: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: Recover
config space of RC0 and its EP
<6>[ 9843.919634] [6: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: Recover
RC0
<6>[ 9843.919670] [6: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: Recover
EP of RC0
<6>[ 9843.920057] [6: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: Refresh
ing the saved config space in PCI framework for RC0 and its EP
<6>[ 9843.925443] [6: kworker/u16:9:32452] [mhi_turn_on_pcie_link] Exited...
<6>[ 9843.925457] [6: kworker/u16:9:32452] [mhi_initiate_m0] Setting M0 ...
<6>[ 9843.925587] [6: kworker/u16:9:32452] [mhi_initiate_m0] Exited...
<6>[ 9843.928342] [4: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 5 link 1, ring type 2, index 0 db 0x5fa26a20
<6>[ 9843.928361] [4: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9843.928387] [6:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9843.928398] [6:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9843.928408] [6:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9843.928950] [6:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9843.939686] [7:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 a9
00 80 03 01 02 59 19 43 00 9d 00 02 04 00
<6>[ 9844.148491] [4: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9844.148523] [7:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[ 9844.148537] [7:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[ 9844.148551] [7:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9844.148740] [7:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[ 9844.332547] [0: thread_hotplug:14070] frequency info : 1000000, prev_cmd

0, exe_cmd 4
<6>[ 9844.332570] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9844.332584] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9844.832545] [0: thread_hotplug:14070] frequency info : 1000000, prev_cmd
0, exe_cmd 4
<6>[ 9844.832569] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9844.832584] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9845.006002] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [P] tID:0 tc:1 tm
:0
<6>[ 9845.132569] [0: thread_hotplug:14070] frequency info : 800000, prev_cmd 0
, exe_cmd 4
<6>[ 9845.132601] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9845.132620] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9845.149235] [1: kworker/u16:9:32452] [mhi_initiate_m3] Entered MHI state
4, Pending M0 0 Pending M3 0
<6>[ 9845.149267] [1: kworker/u16:9:32452] [mhi_initiate_m3] Triggering wake o
ut of M2
<6>[ 9845.159764] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26a60
<6>[ 9845.159796] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9845.159960] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9845.159978] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9845.159994] [2:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9845.160641] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9845.160656] [3: kworker/u16:9:32452] [mhi_initiate_m3] Cancelled M1 time
r, timer was active
<6>[ 9845.160803] [3: kworker/u16:9:32452] [mhi_initiate_m3] Waiting for M3 co
mpletion.
<6>[ 9845.170438] [1: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9845.170503] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 5
<6>[ 9845.170523] [2:MHI_STATE_THREA: 4605] [process_M3_transition] Processing
M3 state transition
<6>[ 9845.170564] [2: kworker/u16:9:32452] [mhi_initiate_m3] M3 completion rec
eived
<6>[ 9845.170593] [2: kworker/u16:9:32452] [mhi_turn_off_pcie_link] Entered...
<6>[ 9845.182663] [2: kworker/u16:9:32452] mhi 0000:01:00.0: [debug] pmcsr reg
: b dev->current_state : 0
<6>[ 9845.182796] [2: kworker/u16:9:32452] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9845.182873] [2: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: ack mes
sage is ok
<6>[ 9845.182891] [2: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: receive
d Enter_L23_READY DLLP packet
<6>[ 9845.182914] [2: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[ 9845.183015] [2: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[ 9845.202469] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [R] tID:0 mc: 16
tc:0 Ver[005683000]
<6>[ 9845.210915] [5: kworker/u16:9:32452] [mhi_turn_off_pcie_link] Exited...
<6>[ 9845.232713] [0: thread_hotplug:14070] frequency info : 1200000, prev_cmd
0, exe_cmd 4

<6>[ 9845.232737] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,


dm_hotplug disable = 0
<6>[ 9845.232750] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9845.732618] [0: thread_hotplug:14070] frequency info : 1000000, prev_cmd
0, exe_cmd 4
<6>[ 9845.732646] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9845.732661] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9845.770528] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [P] tID:0 tc:1 tm
:0
<6>[ 9845.862004] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [R] tID:0 mc: 7 t
c:0 Ver[005683000]
<6>[ 9845.932533] [0: thread_hotplug:14070] frequency info : 1200000, prev_cmd
0, exe_cmd 4
<6>[ 9845.932557] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9845.932572] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9846.203063] I[0:
kworker/0:1:25228] exynos-pcie 10ee0000.pcie0: cp2ap_w
ake irq involked
<6>[ 9846.203220] [0:
kworker/0:1:25228] exynos-pcie 10ee0000.pcie0: PCIe: W
ake work for RC0
<6>[ 9846.203242] [0:
kworker/0:1:25228] exynos-pcie 10ee0000.pcie0: Callbac
k for the event : 4
<6>[ 9846.203256] [0:
kworker/0:1:25228] [mhi_link_state_cb] Received MSM_PC
IE_EVENT_WAKE
<6>[ 9846.203316] [5:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 10
<6>[ 9846.203337] [5:MHI_STATE_THREA: 4605] [process_WAKE_transition] Entered
<6>[ 9846.203355] [5:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[ 9846.203374] [5:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, start of poweron, pcie state: 0
<6>[ 9846.232539] [0: thread_hotplug:14070] frequency info : 1200000, prev_cmd
0, exe_cmd 4
<6>[ 9846.232565] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9846.232579] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9846.242980] [5:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: D state
: 0, dbd900
<6>[ 9846.261714] [5:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_reset: Link up : 0x03daf311
<6>[ 9846.262114] [5:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, end of poweron, pcie state: 3
<6>[ 9846.272773] [5:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] pmcsr reg
: 8 dev->current_state : 3
<6>[ 9846.272951] [5:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9846.272976] [5:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
y for the link of RC0
<6>[ 9846.272998] [5:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
config space of RC0 and its EP
<6>[ 9846.273017] [5:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
RC0
<6>[ 9846.273066] [5:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
EP of RC0
<6>[ 9846.273409] [5:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Refresh
ing the saved config space in PCI framework for RC0 and its EP
<6>[ 9846.279101] [5:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[ 9846.279130] [5:MHI_STATE_THREA: 4605] [process_WAKE_transition] MHI is in
itialized, transitioning to M0.
<6>[ 9846.279185] [5:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Entered MHI state

5, Pending M0 0 Pending M3 0
<6>[ 9846.279208] [5:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Waiting for M0 M1
or M3. Currently 5...
<6>[ 9846.279227] [5:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Wait complete sta
te: 5
<6>[ 9846.279246] [5:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[ 9846.279265] [5:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[ 9846.279284] [5:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Setting M0 ...
<6>[ 9846.279488] [5:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Exited...
<6>[ 9846.279506] [5:MHI_STATE_THREA: 4605] [process_WAKE_transition] Exited.
<6>[ 9846.281850] [5: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 5 link 1, ring type 2, index 0 db 0x5fa26a80
<6>[ 9846.281881] [5: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9846.281929] [6:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9846.281958] [6:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9846.281979] [6:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9846.282756] [6:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9846.285953] [7:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 90 17 51 00 0e 00 14 06 00
<6>[ 9846.286662] [5:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 5a 19 4f 00 00 00
<6>[ 9846.300167] [6:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 5a 19 4f 00 15 00 02 04 00
<6>[ 9846.432579] [0: thread_hotplug:14070] frequency info : 1000000, prev_cmd
0, exe_cmd 4
<6>[ 9846.432609] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9846.432625] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9846.508944] [5: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9846.509003] [6:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[ 9846.509030] [6:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[ 9846.509058] [6:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9846.509138] [6:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[ 9846.643287] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [P] tID:0 tc:1 tm
:0
<6>[ 9846.712385] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [R] tID:0 mc: 5 t
c:0 Ver[005683000]
<6>[ 9846.732565] [0: thread_hotplug:14070] frequency info : 1000000, prev_cmd
0, exe_cmd 4
<6>[ 9846.732590] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9846.732604] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9846.832537] [0: thread_hotplug:14070] frequency info : 1200000, prev_cmd
0, exe_cmd 4
<6>[ 9846.832558] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9846.832571] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9847.232545] [0: thread_hotplug:14070] frequency info : 1000000, prev_cmd
0, exe_cmd 4
<6>[ 9847.232571] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9847.232586] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0

<6>[ 9847.285305] [2: irq/15-SSP_Int: 1775] [SSP] [M] AR-0,736,6371,4708,180,20


,0,0
<6>[ 9847.305332] [7:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 5b 19 43 00 00 00
<6>[ 9847.315931] [5: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26ad0
<6>[ 9847.315948] [5: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9847.315971] [6:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9847.315985] [6:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9847.315996] [6:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work was
cancelled
<6>[ 9847.316348] [6:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9847.325845] [5: kworker/u16:9:32452] [SSP] debug_work_func: (93) - Senso
r state: 0x1fc3febf, RC: 1, CC: 0 DC: 0 TC: 0
<6>[ 9847.325858] [5: kworker/u16:9:32452] [SSP] 0 : 1318, 6697, 4398 (200ms,
0ms)
<6>[ 9847.325866] [6: kworker/u16:15:32536] vfsspi_work_func_debug ldo: 3, slee
p: 0, irq: 0, tz: 1, type: viper
<6>[ 9847.325880] [5: kworker/u16:9:32452] [SSP] 9 : 49, 41, 43, 119, 245, 3 (
200ms)
<6>[ 9847.325887] [5: kworker/u16:9:32452] [SSP] 13 : 1(1ms)
<6>[ 9847.327399] [6:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 a9
00 80 03 01 02 5b 19 43 00 9d 00 02 04 00
<6>[ 9847.334718] [6:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 91 17 51 00 0e 00 14 06 00
<6>[ 9847.335140] [7:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 5c 19 4f 00 00 00
<6>[ 9847.348440] [6:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 5c 19 4f 00 15 00 02 04 00
<6>[ 9847.425368] [5: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9847.425395] [6:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[ 9847.425409] [6:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[ 9847.425423] [6:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9847.425613] [6:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[ 9848.236344] [0: kworker/0:2H:23569] HOME key is pressed
<6>[ 9848.425861] [6: kworker/u16:9:32452] [mhi_initiate_m3] Entered MHI state
4, Pending M0 0 Pending M3 0
<6>[ 9848.425889] [6: kworker/u16:9:32452] [mhi_initiate_m3] Triggering wake o
ut of M2
<6>[ 9848.432622] [0: thread_hotplug:14070] frequency info : 400000, prev_cmd 0
, exe_cmd 4
<6>[ 9848.432674] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9848.432712] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9848.436383] [5: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26b40
<6>[ 9848.436408] [5: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9848.436444] [6:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9848.436462] [6:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9848.436478] [6:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started

<6>[ 9848.437071] [6:MHI_STATE_THREA: 4605] [process_M0_transition] Exited


<6>[ 9848.437079] [7: kworker/u16:9:32452] [mhi_initiate_m3] Cancelled M1 time
r, timer was active
<6>[ 9848.437103] [7: kworker/u16:9:32452] [mhi_initiate_m3] Waiting for M3 co
mpletion.
<6>[ 9848.450259] [5: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9848.450293] [7:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 5
<6>[ 9848.450311] [7:MHI_STATE_THREA: 4605] [process_M3_transition] Processing
M3 state transition
<6>[ 9848.450341] [4: kworker/u16:9:32452] [mhi_initiate_m3] M3 completion rec
eived
<6>[ 9848.450365] [4: kworker/u16:9:32452] [mhi_turn_off_pcie_link] Entered...
<6>[ 9848.462634] [4: kworker/u16:9:32452] mhi 0000:01:00.0: [debug] pmcsr reg
: b dev->current_state : 0
<6>[ 9848.462782] [4: kworker/u16:9:32452] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9848.462860] [4: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: ack mes
sage is ok
<6>[ 9848.462876] [4: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: receive
d Enter_L23_READY DLLP packet
<6>[ 9848.462897] [4: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[ 9848.462995] [4: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[ 9848.492967] [4: kworker/u16:9:32452] [mhi_turn_off_pcie_link] Exited...
<6>[ 9848.632569] [0: thread_hotplug:14070] frequency info : 1000000, prev_cmd
0, exe_cmd 4
<6>[ 9848.632594] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9848.632609] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9849.132556] [0: thread_hotplug:14070] frequency info : 1000000, prev_cmd
0, exe_cmd 4
<6>[ 9849.132582] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9849.132597] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9849.279791] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [P] tID:0 tc:1 tm
:0
<6>[ 9849.383885] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [R] tID:0 mc: 7 t
c:0 Ver[005683000]
<6>[ 9849.393497] [5: kworker/u16:9:32452] [VIB] haptic_work
<6>[ 9849.394901] [7: kworker/u16:9:32452] [VIB] haptic_work
<6>[ 9849.394921] [7: kworker/u16:9:32452] [VIB] max77843_haptic_i2c 1
<6>[ 9849.397405] [7: kworker/u16:9:32452] regulator_enable returns 0
<6>[ 9849.401911] [7: kworker/u16:9:32452] [VIB] haptic_work
<6>[ 9849.402340] [7: kworker/u16:9:32452] [VIB] max77843_haptic_i2c 0
<6>[ 9849.435877] [0: thread_hotplug:14070] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[ 9849.435901] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9849.435914] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9849.931350] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [P] tID:0 tc:1 tm
:0
<6>[ 9849.935986] [0: thread_hotplug:14070] frequency info : 400000, prev_cmd 0
, exe_cmd 4
<6>[ 9849.936045] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9849.936083] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9850.043371] I[0:
swapper/0:
0] exynos-pcie 10ee0000.pcie0: cp2ap_w

ake irq involked


<6>[ 9850.043434] [0:
kworker/0:1:25228] exynos-pcie 10ee0000.pcie0: PCIe: W
ake work for RC0
<6>[ 9850.043463] [0:
kworker/0:1:25228] exynos-pcie 10ee0000.pcie0: Callbac
k for the event : 4
<6>[ 9850.043483] [0:
kworker/0:1:25228] [mhi_link_state_cb] Received MSM_PC
IE_EVENT_WAKE
<6>[ 9850.043547] [7:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 10
<6>[ 9850.043566] [7:MHI_STATE_THREA: 4605] [process_WAKE_transition] Entered
<6>[ 9850.043578] [7:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[ 9850.043592] [7:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, start of poweron, pcie state: 0
<6>[ 9850.082905] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: D state
: 0, 376c00
<6>[ 9850.101104] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_reset: Link up : 0x03136c11
<6>[ 9850.101391] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, end of poweron, pcie state: 3
<6>[ 9850.116112] [2:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] pmcsr reg
: 8 dev->current_state : 3
<6>[ 9850.116273] [2:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9850.116294] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
y for the link of RC0
<6>[ 9850.116309] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
config space of RC0 and its EP
<6>[ 9850.116323] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
RC0
<6>[ 9850.116358] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
EP of RC0
<6>[ 9850.116712] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Refresh
ing the saved config space in PCI framework for RC0 and its EP
<6>[ 9850.121905] [2:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[ 9850.121933] [2:MHI_STATE_THREA: 4605] [process_WAKE_transition] MHI is in
itialized, transitioning to M0.
<6>[ 9850.121948] [2:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Entered MHI state
5, Pending M0 0 Pending M3 0
<6>[ 9850.121963] [2:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Waiting for M0 M1
or M3. Currently 5...
<6>[ 9850.121977] [2:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Wait complete sta
te: 5
<6>[ 9850.121991] [2:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[ 9850.122003] [2:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[ 9850.122017] [2:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Setting M0 ...
<6>[ 9850.122051] [2:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Exited...
<6>[ 9850.122064] [2:MHI_STATE_THREA: 4605] [process_WAKE_transition] Exited.
<6>[ 9850.126514] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [R] tID:0 mc: 16
tc:0 Ver[005683000]
<6>[ 9850.131007] [2: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 5 link 1, ring type 2, index 0 db 0x5fa26b60
<6>[ 9850.131038] [2: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9850.131065] [2: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 5 link 1, ring type 2, index 0 db 0x5fa26b70
<6>[ 9850.131217] [3:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 92 17 51 00 0e 00 14 06 00
<6>[ 9850.131321] [3:
qmuxd: 4756] [mhi_wake_dev_from_m3] Initiating M
0 work...
<6>[ 9850.131388] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni

ng to 2
<6>[ 9850.131407] [2:MHI_STATE_THREA: 4605]
<6>[ 9850.131422] [2:MHI_STATE_THREA: 4605]
cancelled, either running or never started
<6>[ 9850.131570] [0: kworker/u16:9:32452]
ting M0.
<6>[ 9850.131589] [0: kworker/u16:9:32452]
2, Pending M0 1 Pending M3 0
<6>[ 9850.131605] [0: kworker/u16:9:32452]
or M3. Currently 2...
<6>[ 9850.131620] [0: kworker/u16:9:32452]
te: 2
<6>[ 9850.131637] [0: kworker/u16:9:32452]
<6>[ 9850.131650] [0: kworker/u16:9:32452]
<6>[ 9850.133089] [2:
qmuxd: 3399]
00 00 03 01 00 5d 19 4f 00 00 00
<6>[ 9850.134402] [2:MHI_STATE_THREA: 4605]
<6>[ 9850.138624] [0: thread_hotplug:14070]
0, exe_cmd 4
<6>[ 9850.138647] [0: thread_hotplug:14070]
dm_hotplug disable = 0
<6>[ 9850.138658] [0: thread_hotplug:14070]
<6>[ 9850.147340] [7:
qmuxd: 4756]
00 80 03 01 02 5d 19 4f 00 15 00 02 04 00
<6>[ 9850.235945] [0: thread_hotplug:14070]
0, exe_cmd 4
<6>[ 9850.235964] [0: thread_hotplug:14070]
dm_hotplug disable = 0
<6>[ 9850.235976] [0: thread_hotplug:14070]
<6>[ 9850.355795] [6: MHI_EV_THREAD: 4604]
ceived ring 0x0
<6>[ 9850.355860] [7:MHI_STATE_THREA: 4605]
ng to 3
<6>[ 9850.355881] [7:MHI_STATE_THREA: 4605]
M1 state transition from state 3
<6>[ 9850.355901] [7:MHI_STATE_THREA: 4605]
ansition to M2
<6>[ 9850.356095] [7:MHI_STATE_THREA: 4605]
deferred work
<6>[ 9850.546994] I[0:
swapper/0:
0]
edge
<6>[ 9850.547234] [6: kworker/u16:9:32452]
<7>[ 9850.547263] [6: kworker/u16:9:32452]
time_resume
<6>[ 9850.547278] [6: kworker/u16:9:32452]
<7>[ 9850.547297] [6: kworker/u16:9:32452]
amsung_usb2phy_runtime_resume
<6>[ 9850.547330] [6: kworker/u16:9:32452]
hild=0
<7>[ 9850.547349] [6: kworker/u16:9:32452]
<7>[ 9850.547364] [6: kworker/u16:9:32452]
hub
<7>[ 9850.547379] [6: kworker/u16:9:32452]
<7>[ 9850.569192] [6: kworker/u16:9:32452]
<7>[ 9850.569233] [6: kworker/u16:9:32452]
ange 0000
<7>[ 9850.569270] [5:
khubd: 742]
00 evt 0000
<7>[ 9850.569280] [6: kworker/u16:9:32452]
<6>[ 9850.574359] I[0:
swapper/0:
0]

[process_M0_transition] Entered
[process_M0_transition] M3 work NOT
[m0_work] No pending resume, initia
[mhi_initiate_m0] Entered MHI state
[mhi_initiate_m0] Waiting for M0 M1
[mhi_initiate_m0] Wait complete sta
[mhi_initiate_m0] MHI state 2, done
[mhi_initiate_m0] Exited...
[mhi_uci_dump_log] uci_write: 01 0c
[process_M0_transition] Exited
frequency info : 1296000, prev_cmd
lcd is on : 1, low power mode = 0,
cluster1 cores hotplug out : 0
[mhi_uci_dump_log] uci_read: 01 21
frequency info : 1296000, prev_cmd
lcd is on : 1, low power mode = 0,
cluster1 cores hotplug out : 0
[mhi_process_event_ring] MHI STE re
[process_stt_work_item] Transitioni
[process_M1_transition] Processing
[process_M1_transition] Allowing tr
[process_M1_transition] Starting M3
mdm_hsic_irq_handler: detect Rising
mdm_hsic_rpm_check
s5p-ehci 15510000.usb: s5p_ehci_run
request_active_lock_set
samsung-usb2phy 15530000.usb2phy: s
s5p_ehci_runtime_resume: usage=1, c
usb usb1: usb auto-resume
s5p-ehci 15510000.usb: resume root
s5p-ehci 15510000.usb: LRESET 0
hub 1-0:1.0: hub_resume
hub 1-0:1.0: port 2: status 0503 ch
hub 1-0:1.0: state 7 ports 2 chg 00
usb 1-2: finish resume
mdm_hsic_irq_handler: detect Fallin

g edge
<6>[ 9850.576043] [6: kworker/u16:9:32452] [CHKRA:5]>
<3>[ 9850.576362] [6:
ks: 4852] efs_hsic_bridge
b_fs_read, count:8 space:0 copied:8
<3>[ 9850.576575] [6:
ks: 4852] efs_hsic_bridge
b_fs_read, count:40 space:0 copied:40
<3>[ 9850.576694] [6:
ks: 4852] efs_hsic_bridge
b_fs_write ,count:48 cmd:2
<3>[ 9850.588701] [6:
ks: 4852] efs_hsic_bridge
b_fs_read, count:8 space:0 copied:8
<3>[ 9850.588766] [6:
ks: 4852] efs_hsic_bridge
b_fs_read, count:8 space:0 copied:8
<3>[ 9850.588817] [6:
ks: 4852] efs_hsic_bridge
b_fs_write ,count:16 cmd:10
<3>[ 9850.595565] [6:
ks: 4852] efs_hsic_bridge
b_fs_read, count:52 space:0 copied:52
<3>[ 9850.596481] [6:
ks: 4852] efs_hsic_bridge
b_fs_write ,count:16 cmd:10
<3>[ 9850.608809] [6:
ks: 4852] efs_hsic_bridge
b_fs_read, count:1048576 space:1032192 copied:16384
<3>[ 9850.609841] [6:
ks: 4852] efs_hsic_bridge
b_fs_read, count:1032192 space:1015808 copied:16384
<3>[ 9850.610959] [6:
ks: 4852] efs_hsic_bridge
b_fs_read, count:1015808 space:999424 copied:16384
<3>[ 9850.612085] [6:
ks: 4852] efs_hsic_bridge
b_fs_read, count:999424 space:983040 copied:16384
<3>[ 9850.613221] [6:
ks: 4852] efs_hsic_bridge
b_fs_read, count:983040 space:966656 copied:16384
<3>[ 9850.614251] [6:
ks: 4852] efs_hsic_bridge
b_fs_read, count:966656 space:950272 copied:16384
<3>[ 9850.615102] [6:
ks: 4852] efs_hsic_bridge
b_fs_read, count:950272 space:933888 copied:16384
<3>[ 9850.616331] [6:
ks: 4852] efs_hsic_bridge
b_fs_read, count:933888 space:917504 copied:16384
<3>[ 9850.617314] [6:
ks: 4852] efs_hsic_bridge
b_fs_read, count:917504 space:901120 copied:16384
<3>[ 9850.618321] [6:
ks: 4852] efs_hsic_bridge
b_fs_read, count:901120 space:884736 copied:16384
<3>[ 9850.619597] [6:
ks: 4852] efs_hsic_bridge
b_fs_read, count:884736 space:868352 copied:16384
<3>[ 9850.620345] [6:
ks: 4852] efs_hsic_bridge
b_fs_read, count:868352 space:851968 copied:16384
<3>[ 9850.621210] [6:
ks: 4852] efs_hsic_bridge
b_fs_read, count:851968 space:835584 copied:16384
<3>[ 9850.622210] [6:
ks: 4852] efs_hsic_bridge
b_fs_read, count:835584 space:819200 copied:16384
<3>[ 9850.623262] [6:
ks: 4852] efs_hsic_bridge
b_fs_read, count:819200 space:802816 copied:16384
<3>[ 9850.624210] [6:
ks: 4852] efs_hsic_bridge
b_fs_read, count:802816 space:786432 copied:16384
<3>[ 9850.625209] [6:
ks: 4852] efs_hsic_bridge
b_fs_read, count:786432 space:770048 copied:16384
<3>[ 9850.626144] [6:
ks: 4852] efs_hsic_bridge
b_fs_read, count:770048 space:753664 copied:16384
<3>[ 9850.631113] [6:
ks: 4852] efs_hsic_bridge
b_fs_read, count:753664 space:688128 copied:65536
<3>[ 9850.631280] [6:
ks: 4852] efs_hsic_bridge
b_fs_read, count:688128 space:671744 copied:16384
<3>[ 9850.632434] [6:
ks: 4852] efs_hsic_bridge
b_fs_read, count:671744 space:655360 copied:16384

efs_hsic_bridge: ks
efs_hsic_bridge: ks
efs_hsic_bridge: ks
efs_hsic_bridge: ks
efs_hsic_bridge: ks
efs_hsic_bridge: ks
efs_hsic_bridge: ks
efs_hsic_bridge: ks
efs_hsic_bridge: ks
efs_hsic_bridge: ks
efs_hsic_bridge: ks
efs_hsic_bridge: ks
efs_hsic_bridge: ks
efs_hsic_bridge: ks
efs_hsic_bridge: ks
efs_hsic_bridge: ks
efs_hsic_bridge: ks
efs_hsic_bridge: ks
efs_hsic_bridge: ks
efs_hsic_bridge: ks
efs_hsic_bridge: ks
efs_hsic_bridge: ks
efs_hsic_bridge: ks
efs_hsic_bridge: ks
efs_hsic_bridge: ks
efs_hsic_bridge: ks
efs_hsic_bridge: ks
efs_hsic_bridge: ks
efs_hsic_bridge: ks

<3>[ 9850.633420] [6:


ks: 4852] efs_hsic_bridge efs_hsic_bridge: ks
b_fs_read, count:655360 space:638976 copied:16384
<3>[ 9850.635716] [6:
ks: 4852] efs_hsic_bridge efs_hsic_bridge: ks
b_fs_read, count:638976 space:606208 copied:32768
<6>[ 9850.635891] [0: thread_hotplug:14070] frequency info : 1000000, prev_cmd
0, exe_cmd 4
<6>[ 9850.635913] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9850.635928] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<3>[ 9850.636621] [6:
ks: 4852] efs_hsic_bridge efs_hsic_bridge: ks
b_fs_read, count:606208 space:589824 copied:16384
<3>[ 9850.637893] [6:
ks: 4852] efs_hsic_bridge efs_hsic_bridge: ks
b_fs_read, count:589824 space:573440 copied:16384
<3>[ 9850.639065] [5:
ks: 4852] efs_hsic_bridge efs_hsic_bridge: ks
b_fs_read, count:573440 space:557056 copied:16384
<3>[ 9850.639910] [5:
ks: 4852] efs_hsic_bridge efs_hsic_bridge: ks
b_fs_read, count:557056 space:540672 copied:16384
<3>[ 9850.641026] [5:
ks: 4852] efs_hsic_bridge efs_hsic_bridge: ks
b_fs_read, count:540672 space:524288 copied:16384
<3>[ 9850.642035] [5:
ks: 4852] efs_hsic_bridge efs_hsic_bridge: ks
b_fs_read, count:524288 space:507904 copied:16384
<3>[ 9850.643187] [6:
ks: 4852] efs_hsic_bridge efs_hsic_bridge: ks
b_fs_read, count:507904 space:491520 copied:16384
<3>[ 9850.644158] [6:
ks: 4852] efs_hsic_bridge efs_hsic_bridge: ks
b_fs_read, count:491520 space:475136 copied:16384
<3>[ 9850.645272] [6:
ks: 4852] efs_hsic_bridge efs_hsic_bridge: ks
b_fs_read, count:475136 space:458752 copied:16384
<3>[ 9850.646603] [6:
ks: 4852] efs_hsic_bridge efs_hsic_bridge: ks
b_fs_read, count:458752 space:442368 copied:16384
<3>[ 9850.647637] [6:
ks: 4852] efs_hsic_bridge efs_hsic_bridge: ks
b_fs_read, count:442368 space:425984 copied:16384
<3>[ 9850.648771] [6:
ks: 4852] efs_hsic_bridge efs_hsic_bridge: ks
b_fs_read, count:425984 space:409600 copied:16384
<3>[ 9850.649884] [6:
ks: 4852] efs_hsic_bridge efs_hsic_bridge: ks
b_fs_read, count:409600 space:393216 copied:16384
<3>[ 9850.650800] [6:
ks: 4852] efs_hsic_bridge efs_hsic_bridge: ks
b_fs_read, count:393216 space:376832 copied:16384
<3>[ 9850.651803] [6:
ks: 4852] efs_hsic_bridge efs_hsic_bridge: ks
b_fs_read, count:376832 space:360448 copied:16384
<3>[ 9850.652908] [6:
ks: 4852] efs_hsic_bridge efs_hsic_bridge: ks
b_fs_read, count:360448 space:344064 copied:16384
<3>[ 9850.653917] [6:
ks: 4852] efs_hsic_bridge efs_hsic_bridge: ks
b_fs_read, count:344064 space:327680 copied:16384
<3>[ 9850.655035] [6:
ks: 4852] efs_hsic_bridge efs_hsic_bridge: ks
b_fs_read, count:327680 space:311296 copied:16384
<3>[ 9850.656049] [6:
ks: 4852] efs_hsic_bridge efs_hsic_bridge: ks
b_fs_read, count:311296 space:294912 copied:16384
<3>[ 9850.657241] [6:
ks: 4852] efs_hsic_bridge efs_hsic_bridge: ks
b_fs_read, count:294912 space:278528 copied:16384
<3>[ 9850.658246] [6:
ks: 4852] efs_hsic_bridge efs_hsic_bridge: ks
b_fs_read, count:278528 space:262144 copied:16384
<3>[ 9850.659270] [6:
ks: 4852] efs_hsic_bridge efs_hsic_bridge: ks
b_fs_read, count:262144 space:245760 copied:16384
<3>[ 9850.660361] [6:
ks: 4852] efs_hsic_bridge efs_hsic_bridge: ks
b_fs_read, count:245760 space:229376 copied:16384
<3>[ 9850.661642] [6:
ks: 4852] efs_hsic_bridge efs_hsic_bridge: ks
b_fs_read, count:229376 space:212992 copied:16384
<3>[ 9850.662648] [6:
ks: 4852] efs_hsic_bridge efs_hsic_bridge: ks
b_fs_read, count:212992 space:196608 copied:16384
<3>[ 9850.663789] [6:
ks: 4852] efs_hsic_bridge efs_hsic_bridge: ks

b_fs_read, count:196608 space:180224 copied:16384


<3>[ 9850.664794] [6:
ks: 4852] efs_hsic_bridge efs_hsic_bridge: ks
b_fs_read, count:180224 space:163840 copied:16384
<3>[ 9850.665952] [6:
ks: 4852] efs_hsic_bridge efs_hsic_bridge: ks
b_fs_read, count:163840 space:147456 copied:16384
<3>[ 9850.667016] [6:
ks: 4852] efs_hsic_bridge efs_hsic_bridge: ks
b_fs_read, count:147456 space:131072 copied:16384
<3>[ 9850.668030] [6:
ks: 4852] efs_hsic_bridge efs_hsic_bridge: ks
b_fs_read, count:131072 space:114688 copied:16384
<3>[ 9850.669039] [6:
ks: 4852] efs_hsic_bridge efs_hsic_bridge: ks
b_fs_read, count:114688 space:98304 copied:16384
<3>[ 9850.670034] [6:
ks: 4852] efs_hsic_bridge efs_hsic_bridge: ks
b_fs_read, count:98304 space:81920 copied:16384
<3>[ 9850.671244] [4:
ks: 4852] efs_hsic_bridge efs_hsic_bridge: ks
b_fs_read, count:81920 space:65536 copied:16384
<3>[ 9850.672286] [4:
ks: 4852] efs_hsic_bridge efs_hsic_bridge: ks
b_fs_read, count:65536 space:49152 copied:16384
<3>[ 9850.673404] [4:
ks: 4852] efs_hsic_bridge efs_hsic_bridge: ks
b_fs_read, count:49152 space:32768 copied:16384
<3>[ 9850.674393] [4:
ks: 4852] efs_hsic_bridge efs_hsic_bridge: ks
b_fs_read, count:32768 space:16384 copied:16384
<3>[ 9850.675406] [4:
ks: 4852] efs_hsic_bridge efs_hsic_bridge: ks
b_fs_read, count:16384 space:0 copied:16384
<3>[ 9850.689684] [4:
ks: 4852] efs_hsic_bridge efs_hsic_bridge: ks
b_fs_write ,count:8 cmd:7
<3>[ 9850.694592] [4:
ks: 4852] efs_hsic_bridge efs_hsic_bridge: ks
b_fs_read, count:8 space:0 copied:8
<7>[ 9851.201273] [0:
kworker/0:0:13589] usb 1-2: usb auto-suspend, wakeup 1
<7>[ 9851.212557] [0:
kworker/0:0:13589] hub 1-0:1.0: hub_suspend
<7>[ 9851.212600] [0:
kworker/0:0:13589] usb usb1: bus auto-suspend, wakeup
1
<7>[ 9851.212622] [0:
kworker/0:0:13589] s5p-ehci 15510000.usb: suspend root
hub
<3>[ 9851.213947] [0:
kworker/0:0:13589] s5p-ehci 15510000.usb: s5p_ehci_run
time_suspend
<7>[ 9851.225879] [0:
kworker/0:0:13589] samsung-usb2phy 15530000.usb2phy: s
amsung_usb2phy_runtime_suspend
<6>[ 9851.225921] [0:
kworker/0:0:13589] request_active_lock_release
<6>[ 9851.225940] [0:
kworker/0:0:13589] s5p_ehci_runtime_suspend: usage=0,
child=0
<6>[ 9851.236502] [2: irq/15-SSP_Int: 1775] [SSP] [M] AR-0,1163,6578,4719,180,2
0,0,0
<6>[ 9851.322791] [6: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26bb0
<6>[ 9851.322820] [6: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9851.322857] [6:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9851.322872] [6:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9851.322886] [6:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work was
cancelled
<6>[ 9851.323278] [6:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9851.327028] [7:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 93 17 51 00 0e 00 14 06 00
<6>[ 9851.327614] [6:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 5e 19 4f 00 00 00
<6>[ 9851.340249] [7:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 5e 19 4f 00 15 00 02 04 00
<6>[ 9851.401233] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [P] tID:0 tc:1 tm
:0

<6>[ 9851.539222] [0: thread_hotplug:14070] frequency info : 1296000, prev_cmd


0, exe_cmd 4
<6>[ 9851.539251] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9851.539263] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9851.548959] [1: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9851.549002] [3:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[ 9851.549019] [3:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[ 9851.549039] [3:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9851.549137] [3:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[ 9851.689061] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [R] tID:0 mc: 24
tc:0 Ver[005683000]
<6>[ 9851.977886] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [P] tID:0 tc:1 tm
:0
<6>[ 9852.034819] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [R] tID:0 mc: 4 t
c:0 Ver[005683000]
<6>[ 9852.039221] [0: thread_hotplug:14070] frequency info : 800000, prev_cmd 0
, exe_cmd 4
<6>[ 9852.039255] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9852.039274] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9852.142531] [0: thread_hotplug:14070] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[ 9852.142550] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9852.142562] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9852.313157] [2: irq/15-SSP_Int: 1775] [SSP] [M] PD: BaroDisabled
<6>[ 9852.542536] [0: thread_hotplug:14070] frequency info : 1000000, prev_cmd
0, exe_cmd 4
<6>[ 9852.542561] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9852.542576] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9852.549296] [0: kworker/u16:6:32449] [mhi_initiate_m3] Entered MHI state
4, Pending M0 0 Pending M3 0
<6>[ 9852.549326] [0: kworker/u16:6:32449] [mhi_initiate_m3] Triggering wake o
ut of M2
<6>[ 9852.549540] [0:
argosd: 3378] argos_pm_qos_notify: name:UFS, spee
d:147Mbps, prev level:-1, request level:0
<6>[ 9852.552060] [0:
argosd: 3378] argos_freq_lock name:UFS, CPU_MIN=0
, CPU_MAX=0, KFC_MIN=1300000, KFC_MAX=0, MIF=1264000, INT=400000
<6>[ 9852.560401] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26c00
<6>[ 9852.560424] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9852.560455] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9852.560471] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9852.560486] [0:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9852.561109] [1: kworker/u16:6:32449] [mhi_initiate_m3] Cancelled M1 time
r, timer was active
<6>[ 9852.561117] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9852.561314] [1: kworker/u16:6:32449] [mhi_initiate_m3] Waiting for M3 co
mpletion.
<6>[ 9852.570818] [2: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re

ceived ring 0x0


<6>[ 9852.570884] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 5
<6>[ 9852.570904] [0:MHI_STATE_THREA: 4605] [process_M3_transition] Processing
M3 state transition
<6>[ 9852.570951] [2: kworker/u16:6:32449] [mhi_initiate_m3] M3 completion rec
eived
<6>[ 9852.570975] [2: kworker/u16:6:32449] [mhi_turn_off_pcie_link] Entered...
<6>[ 9852.582622] [2: kworker/u16:6:32449] mhi 0000:01:00.0: [debug] pmcsr reg
: b dev->current_state : 0
<6>[ 9852.582715] [2: kworker/u16:6:32449] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9852.582780] [2: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: ack mes
sage is ok
<6>[ 9852.582795] [2: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: receive
d Enter_L23_READY DLLP packet
<6>[ 9852.582814] [2: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[ 9852.582893] [2: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[ 9852.613293] [2: kworker/u16:6:32449] [mhi_turn_off_pcie_link] Exited...
<6>[ 9852.642566] [0: thread_hotplug:14070] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[ 9852.642588] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9852.642600] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9852.714951] [5:
sh:14426] APOLLO Limit margin : 25000 uV
<6>[ 9852.779851] [6:
sh:14449] ATLAS Limit margin : 25000 uV
<6>[ 9853.031764] [1:
kworker/1:3:17119] MIF_TH_LV2 from TMU, 1
<6>[ 9853.156220] [4:
sh:14633] G3D
Limit margin : 12500 uV
<6>[ 9853.365077] [6:
sh:14752] MIF
Limit margin : 12500 uV
<6>[ 9854.062920] [0: thread_hotplug:14070] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[ 9854.062940] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9854.062952] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9854.162576] [0: thread_hotplug:14070] frequency info : 1500000, prev_cmd
4, exe_cmd 0
<6>[ 9854.162593] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9854.162603] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9854.235401] [5:
sh:15269] [LED] led_always_disable_show: led_
fade=0
<6>[ 9854.269628] [5:
sh:15297] [LED] led_fade_show: led_fade=0
<6>[ 9854.302800] [6:
sh:15336] [LED] led_fade_time_up_show: led_fa
de=800
<6>[ 9854.322827] [5:
sh:15357] [LED] led_fade_time_down_show: led_
fade=800
<6>[ 9854.327832] [7:
busybox:15356] EXT4-fs (sda18): re-mounted. Opts:
norecovery
<6>[ 9854.339211] [6:
busybox:15375] EXT4-fs (sda18): re-mounted. Opts:
norecovery
<6>[ 9854.362606] [0: thread_hotplug:14070] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[ 9854.362627] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9854.362639] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9854.486647] [4:
busybox:15507] EXT4-fs (sda18): re-mounted. Opts:
norecovery
<6>[ 9854.516567] [6:
busybox:15539] EXT4-fs (sda18): re-mounted. Opts:

norecovery
<6>[ 9854.554289] [2:
argosd: 3378]
d:50Mbps, prev level:0, request level:-1
<6>[ 9854.555808] [2:
argosd: 3378]
<6>[ 9854.567953] [5:
busybox:15577]
norecovery
<6>[ 9854.577163] [6:
busybox:15585]
norecovery
<6>[ 9854.647887] [5:
busybox:15634]
norecovery
<6>[ 9854.668555] [7:
busybox:15651]
norecovery
<6>[ 9854.710429] [4:
busybox:15703]
norecovery
<6>[ 9854.733505] [6:
busybox:15710]
norecovery
<7>[ 9854.792460] [4:
sh:15776]
p
<7>[ 9854.792934] [4:
sh:15776]
m
<7>[ 9854.792944] [4:
sh:15776]
b
<6>[ 9854.845619] [7:
busybox:15826]
norecovery
<6>[ 9854.870871] [6:
busybox:15840]
norecovery
<6>[ 9854.932029] [5:
busybox:15900]
norecovery
<6>[ 9854.943939] [6:
busybox:15915]
norecovery
<6>[ 9854.959189] [5:
busybox:15930]
norecovery
<6>[ 9854.968677] [5:
busybox:15935]
norecovery
<6>[ 9854.996338] [6:
busybox:15952]
norecovery
<6>[ 9855.003726] [4:
busybox:15962]
norecovery
<6>[ 9855.029377] [5:
busybox:15985]
norecovery
<6>[ 9855.051802] [7:
busybox:16005]
norecovery
<6>[ 9855.073983] [5:
busybox:16026]
norecovery
<6>[ 9855.082317] [4:
busybox:16042]
norecovery
<6>[ 9855.145656] [6:
busybox:16067]
norecovery
<6>[ 9855.159989] [6:
busybox:16072]
norecovery
<6>[ 9855.186599] [2: irq/15-SSP_Int: 1775]
,0,0
<6>[ 9855.212113] [5:
busybox:16096]
norecovery
<6>[ 9855.225810] [7:
busybox:16101]
norecovery
<6>[ 9855.286009] [5:
busybox:16122]
norecovery
<6>[ 9855.299549] [6:
busybox:16127]
norecovery

argos_pm_qos_notify: name:UFS, spee


argos_freq_unlock name:UFS
EXT4-fs (sda18): re-mounted. Opts:
EXT4-fs (sda18): re-mounted. Opts:
EXT4-fs (sda18): re-mounted. Opts:
EXT4-fs (sda18): re-mounted. Opts:
EXT4-fs (sda18): re-mounted. Opts:
EXT4-fs (sda18): re-mounted. Opts:
usb: functions_show enabled_func=mt
usb: functions_show enabled_func=ac
usb: functions_show enabled_func=ad
EXT4-fs (sda18): re-mounted. Opts:
EXT4-fs (sda18): re-mounted. Opts:
EXT4-fs (sda18): re-mounted. Opts:
EXT4-fs (sda18): re-mounted. Opts:
EXT4-fs (sda18): re-mounted. Opts:
EXT4-fs (sda18): re-mounted. Opts:
EXT4-fs (sda18): re-mounted. Opts:
EXT4-fs (sda18): re-mounted. Opts:
EXT4-fs (sda18): re-mounted. Opts:
EXT4-fs (sda18): re-mounted. Opts:
EXT4-fs (sda18): re-mounted. Opts:
EXT4-fs (sda18): re-mounted. Opts:
EXT4-fs (sda18): re-mounted. Opts:
EXT4-fs (sda18): re-mounted. Opts:
[SSP] [M] AR-0,816,6924,4193,180,20
EXT4-fs (sda18): re-mounted. Opts:
EXT4-fs (sda18): re-mounted. Opts:
EXT4-fs (sda18): re-mounted. Opts:
EXT4-fs (sda18): re-mounted. Opts:

<6>[ 9855.539436] [1:


kworker/1:3:17119] MIF_TH_LV1 from TMU, 0
<6>[ 9857.410539] [2:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 5f 19 43 00 00 00
<6>[ 9857.410622] [2:
qmuxd: 3399] [mhi_wake_dev_from_m3] Initiating M
0 work...
<6>[ 9857.410690] [0: kworker/u16:15:32536] [m0_work] No pending resume, initia
ting M0.
<6>[ 9857.410712] [0: kworker/u16:15:32536] [mhi_initiate_m0] Entered MHI state
5, Pending M0 0 Pending M3 0
<6>[ 9857.410732] [0: kworker/u16:15:32536] [mhi_initiate_m0] Waiting for M0 M1
or M3. Currently 5...
<6>[ 9857.410750] [0: kworker/u16:15:32536] [mhi_initiate_m0] Wait complete sta
te: 5
<6>[ 9857.410768] [0: kworker/u16:15:32536] [mhi_turn_on_pcie_link] Entered...
<6>[ 9857.410796] [0: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, start of poweron, pcie state: 0
<6>[ 9857.449819] [3: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: D state
: 0, 7f7e00
<6>[ 9857.470544] [3: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: exynos_
pcie_reset: Link up : 0x038e8111
<6>[ 9857.470929] [3: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, end of poweron, pcie state: 3
<6>[ 9857.482866] [3: kworker/u16:15:32536] mhi 0000:01:00.0: [debug] pmcsr reg
: 8 dev->current_state : 3
<6>[ 9857.483053] [3: kworker/u16:15:32536] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9857.483075] [3: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: Recover
y for the link of RC0
<6>[ 9857.483133] [3: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: Recover
config space of RC0 and its EP
<6>[ 9857.483150] [3: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: Recover
RC0
<6>[ 9857.483196] [3: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: Recover
EP of RC0
<6>[ 9857.483682] [3: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: Refresh
ing the saved config space in PCI framework for RC0 and its EP
<6>[ 9857.489585] [3: kworker/u16:15:32536] [mhi_turn_on_pcie_link] Exited...
<6>[ 9857.489620] [3: kworker/u16:15:32536] [mhi_initiate_m0] Setting M0 ...
<6>[ 9857.489724] [3: kworker/u16:15:32536] [mhi_initiate_m0] Exited...
<6>[ 9857.493141] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 5 link 1, ring type 2, index 0 db 0x5fa26c20
<6>[ 9857.493180] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9857.493359] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9857.493380] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9857.493401] [1:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9857.493968] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9857.505619] [2:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 9f
00 80 03 01 02 5f 19 43 00 93 00 02 04 00
<6>[ 9857.715073] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9857.715312] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[ 9857.715364] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[ 9857.715418] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9857.715647] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3

deferred work
<6>[ 9858.312896] [3: kworker/u16:15:32536] vfsspi_work_func_debug ldo: 3, slee
p: 0, irq: 0, tz: 1, type: viper
<6>[ 9858.339381] [0: kworker/u16:15:32536] [SSP] debug_work_func: (61) - Senso
r state: 0x1fc3febf, RC: 1, CC: 0 DC: 0 TC: 0
<6>[ 9858.339436] [0: kworker/u16:15:32536] [SSP] 0 : 920, 7031, 4091 (200ms, 0
ms)
<6>[ 9858.339483] [0: kworker/u16:15:32536] [SSP] 9 : 57, 47, 51, 144, 245, 3 (
200ms)
<6>[ 9858.339523] [0: kworker/u16:15:32536] [SSP] 13 : 1(1ms)
<4>[ 9858.706368] I[0:
swapper/0:
0] DHCP - 0x108 [RX]
<6>[ 9858.716162] [3: kworker/u16:15:32536] [mhi_initiate_m3] Entered MHI state
4, Pending M0 0 Pending M3 0
<6>[ 9858.716234] [3: kworker/u16:15:32536] [mhi_initiate_m3] Triggering wake o
ut of M2
<6>[ 9858.718171] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26c60
<6>[ 9858.718230] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9858.718458] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9858.718508] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9858.718551] [1:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9858.723287] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9858.723433] [3: kworker/u16:15:32536] [mhi_initiate_m3] Cancelled M1 time
r, timer was active
<6>[ 9858.723676] [3: kworker/u16:15:32536] [mhi_initiate_m3] Waiting for M3 co
mpletion.
<6>[ 9858.736722] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9858.736932] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 5
<6>[ 9858.736982] [1:MHI_STATE_THREA: 4605] [process_M3_transition] Processing
M3 state transition
<6>[ 9858.737176] [3: kworker/u16:15:32536] [mhi_initiate_m3] M3 completion rec
eived
<6>[ 9858.737235] [3: kworker/u16:15:32536] [mhi_turn_off_pcie_link] Entered...
<6>[ 9858.749537] [3: kworker/u16:15:32536] mhi 0000:01:00.0: [debug] pmcsr reg
: b dev->current_state : 0
<6>[ 9858.749703] [3: kworker/u16:15:32536] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9858.749812] [3: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: ack mes
sage is ok
<6>[ 9858.749857] [3: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: receive
d Enter_L23_READY DLLP packet
<6>[ 9858.749910] [3: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[ 9858.750062] [3: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[ 9858.780062] [3: kworker/u16:15:32536] [mhi_turn_off_pcie_link] Exited...
<6>[ 9859.102419] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [P] tID:0 tc:1 tm
:0
<6>[ 9859.179317] [0: thread_hotplug:14070] frequency info : 800000, prev_cmd 0
, exe_cmd 4
<6>[ 9859.179351] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9859.179370] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9859.264580] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [R] tID:0 mc: 13
tc:0 Ver[005683000]

<6>[ 9859.282620] [0: thread_hotplug:14070] frequency info : 1296000, prev_cmd


0, exe_cmd 4
<6>[ 9859.282643] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9859.282655] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9859.316801] [2: irq/15-SSP_Int: 1775] [SSP] [M] AR-0,1930,7235,4381,180,2
0,0,0
<4>[ 9859.441615] I[0:
swapper/0:
0] DHCP - 0x108 [RX]
<6>[ 9860.220942] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [P] tID:0 tc:1 tm
:0
<6>[ 9860.281280] I[0:
swapper/0:
0] exynos-pcie 10ee0000.pcie0: cp2ap_w
ake irq involked
<6>[ 9860.281393] [0:
kworker/0:0:13589] exynos-pcie 10ee0000.pcie0: PCIe: W
ake work for RC0
<6>[ 9860.281426] [0:
kworker/0:0:13589] exynos-pcie 10ee0000.pcie0: Callbac
k for the event : 4
<6>[ 9860.281448] [0:
kworker/0:0:13589] [mhi_link_state_cb] Received MSM_PC
IE_EVENT_WAKE
<6>[ 9860.281620] [7:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 10
<6>[ 9860.281641] [7:MHI_STATE_THREA: 4605] [process_WAKE_transition] Entered
<6>[ 9860.281657] [7:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[ 9860.281675] [7:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, start of poweron, pcie state: 0
<6>[ 9860.289241] [0: thread_hotplug:14070] frequency info : 800000, prev_cmd 0
, exe_cmd 4
<6>[ 9860.289264] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9860.289301] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9860.322996] [6:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: D state
: 0, 9b1300
<6>[ 9860.341544] [6:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_reset: Link up : 0x032ae511
<6>[ 9860.341818] [6:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, end of poweron, pcie state: 3
<6>[ 9860.352723] [6:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] pmcsr reg
: 8 dev->current_state : 3
<6>[ 9860.352897] [6:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9860.352914] [6:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
y for the link of RC0
<6>[ 9860.352928] [6:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
config space of RC0 and its EP
<6>[ 9860.352941] [6:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
RC0
<6>[ 9860.352975] [6:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
EP of RC0
<6>[ 9860.353337] [6:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Refresh
ing the saved config space in PCI framework for RC0 and its EP
<6>[ 9860.358459] [6:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[ 9860.358479] [6:MHI_STATE_THREA: 4605] [process_WAKE_transition] MHI is in
itialized, transitioning to M0.
<6>[ 9860.358494] [6:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Entered MHI state
5, Pending M0 0 Pending M3 0
<6>[ 9860.358508] [6:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Waiting for M0 M1
or M3. Currently 5...
<6>[ 9860.358522] [6:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Wait complete sta
te: 5
<6>[ 9860.358537] [6:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[ 9860.358551] [6:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...

<6>[ 9860.358563] [6:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Setting M0 ...


<6>[ 9860.358610] [6:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Exited...
<6>[ 9860.358623] [6:MHI_STATE_THREA: 4605] [process_WAKE_transition] Exited.
<6>[ 9860.361880] [4: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 5 link 1, ring type 2, index 0 db 0x5fa26c80
<6>[ 9860.361906] [4: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9860.361945] [6:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9860.361961] [6:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9860.361974] [6:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9860.362584] [6:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9860.366054] [7:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 94 17 51 00 0e 00 14 06 00
<6>[ 9860.367431] [4:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 60 19 4f 00 00 00
<6>[ 9860.380184] [7:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 60 19 4f 00 15 00 02 04 00
<6>[ 9860.389206] [0: thread_hotplug:14070] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[ 9860.389228] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9860.389240] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9860.497813] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [R] tID:0 mc: 23
tc:0 Ver[005683000]
<6>[ 9860.589001] [4: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9860.589042] [6:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[ 9860.589063] [6:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[ 9860.589083] [6:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9860.589197] [0: thread_hotplug:14070] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[ 9860.589215] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9860.589227] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9860.589312] [6:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<4>[ 9860.850858] I[0:
swapper/0:
0] DHCP - REQUEST [RX]
<6>[ 9861.089256] [0: thread_hotplug:14070] frequency info : 1000000, prev_cmd
0, exe_cmd 4
<6>[ 9861.089283] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9861.089298] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9861.194971] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [P] tID:0 tc:1 tm
:0
<6>[ 9861.289217] [0: thread_hotplug:14070] frequency info : 1000000, prev_cmd
0, exe_cmd 4
<6>[ 9861.289245] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9861.289260] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9861.389196] [0: thread_hotplug:14070] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[ 9861.389220] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9861.389232] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9861.592544] [6: kworker/u16:15:32536] [mhi_initiate_m3] Entered MHI state

4, Pending M0 0 Pending M3 0
<6>[ 9861.592578] [6: kworker/u16:15:32536] [mhi_initiate_m3] Triggering wake o
ut of M2
<6>[ 9861.603017] [4: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26cd0
<6>[ 9861.603052] [4: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9861.603100] [6:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9861.603128] [6:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9861.603149] [6:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9861.603797] [6:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9861.603809] [7: kworker/u16:15:32536] [mhi_initiate_m3] Cancelled M1 time
r, timer was active
<6>[ 9861.603967] [7: kworker/u16:15:32536] [mhi_initiate_m3] Waiting for M3 co
mpletion.
<6>[ 9861.613020] [4: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9861.613074] [6:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 5
<6>[ 9861.613099] [6:MHI_STATE_THREA: 4605] [process_M3_transition] Processing
M3 state transition
<6>[ 9861.613144] [7: kworker/u16:15:32536] [mhi_initiate_m3] M3 completion rec
eived
<6>[ 9861.613177] [7: kworker/u16:15:32536] [mhi_turn_off_pcie_link] Entered...
<6>[ 9861.625986] [7: kworker/u16:15:32536] mhi 0000:01:00.0: [debug] pmcsr reg
: b dev->current_state : 0
<6>[ 9861.626136] [7: kworker/u16:15:32536] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9861.626217] [7: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: ack mes
sage is ok
<6>[ 9861.626239] [7: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: receive
d Enter_L23_READY DLLP packet
<6>[ 9861.626268] [7: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[ 9861.626371] [7: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[ 9861.656350] [7: kworker/u16:15:32536] [mhi_turn_off_pcie_link] Exited...
<6>[ 9861.760563] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [R] tID:0 mc: 48
tc:0 Ver[005683000]
<6>[ 9861.792525] [0: thread_hotplug:14070] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[ 9861.792547] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9861.792558] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9862.292548] [0: thread_hotplug:14070] frequency info : 1000000, prev_cmd
0, exe_cmd 4
<6>[ 9862.292576] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9862.292591] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9862.592424] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [P] tID:0 tc:1 tm
:0
<6>[ 9862.777030] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [R] tID:0 mc: 15
tc:0 Ver[005683000]
<6>[ 9862.792527] [0: thread_hotplug:14070] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[ 9862.792548] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9862.792560] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0

<6>[ 9862.845747] I[0:


swapper/0:
0] exynos-pcie 10ee0000.pcie0: cp2ap_w
ake irq involked
<6>[ 9862.845797] [0:
kworker/0:0:13589] exynos-pcie 10ee0000.pcie0: PCIe: W
ake work for RC0
<6>[ 9862.845843] [0:
kworker/0:0:13589] exynos-pcie 10ee0000.pcie0: Callbac
k for the event : 4
<6>[ 9862.845857] [0:
kworker/0:0:13589] [mhi_link_state_cb] Received MSM_PC
IE_EVENT_WAKE
<6>[ 9862.846009] [6:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 10
<6>[ 9862.846029] [6:MHI_STATE_THREA: 4605] [process_WAKE_transition] Entered
<6>[ 9862.846043] [6:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[ 9862.846061] [6:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, start of poweron, pcie state: 0
<6>[ 9862.886261] [6:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: D state
: 0, a23b00
<6>[ 9862.906740] [4:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_reset: Link up : 0x03374411
<6>[ 9862.907102] [4:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, end of poweron, pcie state: 3
<6>[ 9862.919392] [4:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] pmcsr reg
: 8 dev->current_state : 3
<6>[ 9862.919570] [4:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9862.919588] [4:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
y for the link of RC0
<6>[ 9862.919602] [4:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
config space of RC0 and its EP
<6>[ 9862.919614] [4:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
RC0
<6>[ 9862.919646] [4:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
EP of RC0
<6>[ 9862.920015] [4:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Refresh
ing the saved config space in PCI framework for RC0 and its EP
<6>[ 9862.925276] [4:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[ 9862.925292] [4:MHI_STATE_THREA: 4605] [process_WAKE_transition] MHI is in
itialized, transitioning to M0.
<6>[ 9862.925306] [4:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Entered MHI state
5, Pending M0 0 Pending M3 0
<6>[ 9862.925321] [4:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Waiting for M0 M1
or M3. Currently 5...
<6>[ 9862.925334] [4:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Wait complete sta
te: 5
<6>[ 9862.925347] [4:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[ 9862.925358] [4:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[ 9862.925371] [4:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Setting M0 ...
<6>[ 9862.925439] [4:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Exited...
<6>[ 9862.925452] [4:MHI_STATE_THREA: 4605] [process_WAKE_transition] Exited.
<6>[ 9862.929001] [4: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 5 link 1, ring type 2, index 0 db 0x5fa26cf0
<6>[ 9862.929024] [4: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9862.929059] [5:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9862.929078] [5:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9862.929093] [5:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9862.929656] [5:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9862.933028] [7:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 95 17 51 00 0e 00 14 06 00

<6>[ 9862.933559] [4:


qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 61 19 4f 00 00 00
<6>[ 9862.941579] [7:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 61 19 4f 00 15 00 02 04 00
<6>[ 9863.095867] [0: thread_hotplug:14070] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[ 9863.095888] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9863.095900] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9863.150497] [4: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9863.150554] [7:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[ 9863.150583] [7:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[ 9863.150612] [7:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9863.150850] [7:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[ 9863.267625] [2: irq/15-SSP_Int: 1775] [SSP] [M] AR-0,816,6813,4430,180,20
,0,0
<6>[ 9863.295993] [0: thread_hotplug:14070] frequency info : 1000000, prev_cmd
0, exe_cmd 4
<6>[ 9863.296024] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9863.296040] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9864.152820] [1: kworker/u16:15:32536] [mhi_initiate_m3] Entered MHI state
4, Pending M0 0 Pending M3 0
<6>[ 9864.152859] [1: kworker/u16:15:32536] [mhi_initiate_m3] Triggering wake o
ut of M2
<6>[ 9864.163372] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26d40
<6>[ 9864.163434] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9864.163687] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9864.163733] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9864.163772] [2:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9864.167543] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9864.167583] [0: kworker/u16:15:32536] [mhi_initiate_m3] Cancelled M1 time
r, timer was active
<6>[ 9864.167846] [0: kworker/u16:15:32536] [mhi_initiate_m3] Waiting for M3 co
mpletion.
<6>[ 9864.180871] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9864.181049] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 5
<6>[ 9864.181077] [2:MHI_STATE_THREA: 4605] [process_M3_transition] Processing
M3 state transition
<6>[ 9864.181130] [0: kworker/u16:15:32536] [mhi_initiate_m3] M3 completion rec
eived
<6>[ 9864.181165] [0: kworker/u16:15:32536] [mhi_turn_off_pcie_link] Entered...
<6>[ 9864.196244] [1: kworker/u16:15:32536] mhi 0000:01:00.0: [debug] pmcsr reg
: b dev->current_state : 0
<6>[ 9864.196417] [1: kworker/u16:15:32536] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9864.196515] [1: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: ack mes
sage is ok
<6>[ 9864.196547] [1: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: receive

d Enter_L23_READY DLLP packet


<6>[ 9864.196586] [1: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[ 9864.196733] [1: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[ 9864.226731] [1: kworker/u16:15:32536] [mhi_turn_off_pcie_link] Exited...
<6>[ 9864.518958] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [P] tID:0 tc:1 tm
:0
<6>[ 9864.599384] [0: thread_hotplug:14070] frequency info : 800000, prev_cmd 0
, exe_cmd 4
<6>[ 9864.599420] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9864.599440] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9864.646224] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [R] tID:0 mc: 10
tc:0 Ver[005683000]
<6>[ 9864.699268] [0: thread_hotplug:14070] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[ 9864.699290] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9864.699302] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9865.406993] I[0:
swapper/0:
0] exynos-pcie 10ee0000.pcie0: cp2ap_w
ake irq involked
<6>[ 9865.407136] [0:
kworker/0:0:13589] exynos-pcie 10ee0000.pcie0: PCIe: W
ake work for RC0
<6>[ 9865.407193] [0:
kworker/0:0:13589] exynos-pcie 10ee0000.pcie0: Callbac
k for the event : 4
<6>[ 9865.407234] [0:
kworker/0:0:13589] [mhi_link_state_cb] Received MSM_PC
IE_EVENT_WAKE
<6>[ 9865.407475] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 10
<6>[ 9865.407527] [2:MHI_STATE_THREA: 4605] [process_WAKE_transition] Entered
<6>[ 9865.407573] [2:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[ 9865.407624] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, start of poweron, pcie state: 0
<6>[ 9865.446690] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: D state
: 0, 6ab200
<6>[ 9865.466644] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_reset: Link up : 0x03af7611
<6>[ 9865.467147] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, end of poweron, pcie state: 3
<6>[ 9865.479662] [2:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] pmcsr reg
: 8 dev->current_state : 3
<6>[ 9865.479845] [2:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9865.479898] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
y for the link of RC0
<6>[ 9865.479944] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
config space of RC0 and its EP
<6>[ 9865.479988] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
RC0
<6>[ 9865.480077] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
EP of RC0
<6>[ 9865.480539] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Refresh
ing the saved config space in PCI framework for RC0 and its EP
<6>[ 9865.485944] [2:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[ 9865.486002] [2:MHI_STATE_THREA: 4605] [process_WAKE_transition] MHI is in
itialized, transitioning to M0.
<6>[ 9865.486052] [2:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Entered MHI state
5, Pending M0 0 Pending M3 0
<6>[ 9865.486100] [2:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Waiting for M0 M1

or M3. Currently 5...


<6>[ 9865.486145] [2:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Wait complete sta
te: 5
<6>[ 9865.486189] [2:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[ 9865.486228] [2:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[ 9865.486270] [2:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Setting M0 ...
<6>[ 9865.486502] [2:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Exited...
<6>[ 9865.486543] [2:MHI_STATE_THREA: 4605] [process_WAKE_transition] Exited.
<6>[ 9865.489511] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 5 link 1, ring type 2, index 0 db 0x5fa26d60
<6>[ 9865.489571] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9865.489793] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9865.489844] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9865.489890] [2:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9865.493388] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9865.493814] [1:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 96 17 51 00 0e 00 14 06 00
<6>[ 9865.496039] [1:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 62 19 4f 00 00 00
<6>[ 9865.508482] [1:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 62 19 4f 00 15 00 02 04 00
<6>[ 9865.717618] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9865.717886] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[ 9865.717940] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[ 9865.717999] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9865.718233] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[ 9866.507228] [0:
kworker/0:1:25228] max77843_fg_read_vcell: VCELL(4112)
, data(0xcda6)
<6>[ 9866.508648] [0:
kworker/0:1:25228] [Time-to-FULL] 368634(secs), 6143(m
ins)
<6>[ 9866.508974] [0:
kworker/0:1:25228] [Time-to-EMPTY] 15423(secs), 257(mi
ns)
<6>[ 9866.554302] [0:
kworker/0:1:25228] [FG] 0080h,ffa5h,7f80h,ff01h,1900h,
0f7dh,5b81h,53b1h,1999h,cda6h,fba3h,f54dh,0140h,5550h,5d04h,0fd5h,1023h,0ab6h,33
80h,5c00h,05d2h,0148h,197bh,5c1ch,1439h,cd77h,2c0fh,da96h,41a5h,0314h,0320h,0e96
h,ffffh,20b0h,2000h,127ch,1400h,2305h,197ah,8086h,2472h,cea4h,203bh,09d0h,e3e1h,
290eh,0400h,0000h,6ef6h,4c3bh,1603h,0241h,0000h,10eeh,ebc8h,05e0h,0050h,1a45h,7d
54h,f533h,1680h,1008h,4fb9h,e000h,0000h,a900h,1005h,0000h,d26fh,0a8bh,7210h,fff7
h,5df9h,2271h,0fd6h,0000h,d90dh,d782h,159ah,0000h,0000h,0000h,7f80h,0000h,0000h,
0005h,011ah,05e4h,0000h,006bh,090ch,0050h,1b55h,0204h,094dh,0000h,039eh,100fh,0c
0eh,0c0dh,0c0ch,0c0bh,0c0ah,0c09h,0c08h,a516h,4350h,0010h,0075h,ffffh,5d55h,0f60
h,19e0h,0000h,f67bh,0019h,1dc5h,0001h,0ab3h,0001h,4c50h,fffch,4170h,0000h,4000h,
0000h,7d00h,0620h,0000h,0000h,0000h,0000h,2355h,0000h,0040h,f0e4h,4043h,5640h,fe
71h,d2ebh,004bh,2910h,cda6h,555ch,
<7>[ 9866.556279] [0:
kworker/0:1:25228] max77843_fg_write_temp: temperature
to (260, 0x1a00)
<6>[ 9866.556878] [0:
kworker/0:1:25228] max77843_fg_check_qrtable: QRTABLE2
0_REG(0x1603), QRTABLE30_REG(0x1005)
<7>[ 9866.560460] [0:
kworker/0:1:25228] max77843_get_fuelgauge_soc: soc(915
), low_batt_alarm(0)
<6>[ 9866.560514] [0:
kworker/0:1:25228] sec_bat_get_property cable type = 1
sleep_mode = 0

<7>[ 9866.560789] [0:


kworker/0:1:25228] max77843_chg_get_property : set-cur
rent(0mA), current now(433mA)
<6>[ 9866.561066] [0:
kworker/0:1:25228] max77843_fg_get_scaled_capacity : C
ABLE TYPE(1) INPUT CURRENT(433) CHARGINGE MODE(NONE)
<7>[ 9866.561111] [0:
kworker/0:1:25228] max77843_fg_get_scaled_capacity: ca
pacity_max (926)
<6>[ 9866.561391] [0:
kworker/0:1:25228] max77843_fg_get_scaled_capacity: sc
aled capacity (98.8)
<6>[ 9866.561469] [0:
kworker/0:1:25228] sec-battery battery.51: sec_bat_get
_battery_info:Vnow(4112mV),Inow(-174mA),Isysnow(-1mA),Imax(460mA),SOC(98%),Tbat(
260),Tchg(288),Twpc(0),is_hc_usb(0)
<6>[ 9866.561523] [0:
kworker/0:1:25228] sec-battery battery.51: Connected,V
avg(4109mV),Vocv(4218mV),Tamb(259),Iavg(-427mA),Isysavg(-1mA),Iadc(0)
<6>[ 9866.562397] [0:
kworker/0:1:25228] sdchg_ic_use_adc_check : SELF_DISCH
ARGING(0) SELF_DISCHARGING_ADC(0)
<6>[ 9866.562450] [0:
kworker/0:1:25228] sec-battery battery.51: sdchg_ic_us
e_discharging_check: Auto_DIS(0), Force_DIS(0)
<6>[ 9866.562811] [0:
kworker/0:1:25228] max77843_get_float_voltage: battery
cv voltage 0x1d, chg_float_voltage = 4350mV
<6>[ 9866.562861] [0:
kworker/0:1:25228] sec_bat_swelling_check: status(2),
swell_mode(0:1), cv(0x1d), temp(260)
<6>[ 9866.562900] [0:
kworker/0:1:25228] sec_bat_swelling_check: DISCHARGING
or NOT-CHARGING. stop swelling mode
<6>[ 9866.562965] [0:
kworker/0:1:25228] sec-battery battery.51: sec_bat_mon
itor_work: Status(Discharging), mode(None), Health(Good), Cable(1), level(70%),
HV(NONE), Cycle(599)
<6>[ 9866.563017] [0:
kworker/0:1:25228] power_supply battery: power_supply_
changed
<6>[ 9866.563193] [0:
kworker/0:1:25228] sec_bat_get_property cable type = 1
sleep_mode = 0
<6>[ 9866.563259] [0:
kworker/0:1:25228] sec_bat_get_property cable type = 1
<6>[ 9866.574547] [3:
healthd: 3346] sec_bat_get_property cable type = 1
sleep_mode = 0
<12>[ 9866.577065] [3:
healthd: 3346] healthd: battery l=98 v=4112 t=26.
0 h=2 st=3 c=0 o=1 ca=-427 ct=0 ps=0 chg= 2016-11-17 16:17:02.744935166 UTC
<12>[ 9866.577298] [3:
healthd: 3346] healthd: battery l=98 v=4112 t=26.
0 h=2 st=3 c=0 o=1 ca=-427 ct=0 ps=0 chg= 2016-11-17 16:17:02.744935166 UTC hv=0
sec=0 chg=
<14>[ 9866.577380] [3:
healthd: 3346] healthd-android: healthd_mode_andr
oid_battery_update
<14>[ 9866.577450] [3:
healthd: 3346] BatteryPropertiesRegistrar: notify
Listeners : start
<14>[ 9866.577539] [3:
healthd: 3346] IBatteryPropertiesListener : batte
ryPropertiesChanged!
<14>[ 9866.577539] [3:
healthd: 3346] : BatteryPropertiesRegistrar: noti
fyListeners : done
<6>[ 9866.720081] [1: kworker/u16:15:32536] [mhi_initiate_m3] Entered MHI state
4, Pending M0 0 Pending M3 0
<6>[ 9866.720122] [1: kworker/u16:15:32536] [mhi_initiate_m3] Triggering wake o
ut of M2
<6>[ 9866.721820] [0: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26db0
<6>[ 9866.721858] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9866.721934] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9866.721958] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9866.721981] [2:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started

<6>[ 9866.722874] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Exited


<6>[ 9866.722890] [0: kworker/u16:15:32536] [mhi_initiate_m3] Cancelled M1 time
r, timer was active
<6>[ 9866.723014] [0: kworker/u16:15:32536] [mhi_initiate_m3] Waiting for M3 co
mpletion.
<6>[ 9866.732354] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9866.732434] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 5
<6>[ 9866.732461] [2:MHI_STATE_THREA: 4605] [process_M3_transition] Processing
M3 state transition
<6>[ 9866.732587] [2: kworker/u16:15:32536] [mhi_initiate_m3] M3 completion rec
eived
<6>[ 9866.732621] [2: kworker/u16:15:32536] [mhi_turn_off_pcie_link] Entered...
<6>[ 9866.746060] [2: kworker/u16:15:32536] mhi 0000:01:00.0: [debug] pmcsr reg
: b dev->current_state : 0
<6>[ 9866.746215] [2: kworker/u16:15:32536] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9866.746300] [2: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: ack mes
sage is ok
<6>[ 9866.746320] [2: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: receive
d Enter_L23_READY DLLP packet
<6>[ 9866.746347] [2: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[ 9866.746460] [2: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[ 9866.779323] [2: kworker/u16:15:32536] [mhi_turn_off_pcie_link] Exited...
<6>[ 9867.220868] [2: irq/15-SSP_Int: 1775] [SSP] [M] AR-0,-335,6074,5045,180,2
0,0,0
<6>[ 9867.220868] [2: irq/15-SSP_Int: 1775] PD: BaroDisabled
<6>[ 9867.565736] [3:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 63 19 43 00 00 00
<6>[ 9867.565887] [3:
qmuxd: 3399] [mhi_wake_dev_from_m3] Initiating M
0 work...
<6>[ 9867.566021] [1: kworker/u16:15:32536] [m0_work] No pending resume, initia
ting M0.
<6>[ 9867.566049] [1: kworker/u16:15:32536] [mhi_initiate_m0] Entered MHI state
5, Pending M0 0 Pending M3 0
<6>[ 9867.566071] [1: kworker/u16:15:32536] [mhi_initiate_m0] Waiting for M0 M1
or M3. Currently 5...
<6>[ 9867.566091] [1: kworker/u16:15:32536] [mhi_initiate_m0] Wait complete sta
te: 5
<6>[ 9867.566111] [1: kworker/u16:15:32536] [mhi_turn_on_pcie_link] Entered...
<6>[ 9867.566141] [1: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, start of poweron, pcie state: 0
<6>[ 9867.606339] [3: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: D state
: 0, 85c00
<6>[ 9867.626781] [3: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: exynos_
pcie_reset: Link up : 0x03fc3011
<6>[ 9867.627185] [3: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, end of poweron, pcie state: 3
<6>[ 9867.639654] [3: kworker/u16:15:32536] mhi 0000:01:00.0: [debug] pmcsr reg
: 8 dev->current_state : 3
<6>[ 9867.639815] [3: kworker/u16:15:32536] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9867.639845] [3: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: Recover
y for the link of RC0
<6>[ 9867.639868] [3: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: Recover
config space of RC0 and its EP
<6>[ 9867.639890] [3: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: Recover

RC0
<6>[ 9867.639945] [3: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: Recover
EP of RC0
<6>[ 9867.640475] [3: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: Refresh
ing the saved config space in PCI framework for RC0 and its EP
<6>[ 9867.645886] [3: kworker/u16:15:32536] [mhi_turn_on_pcie_link] Exited...
<6>[ 9867.645931] [3: kworker/u16:15:32536] [mhi_initiate_m0] Setting M0 ...
<6>[ 9867.646143] [3: kworker/u16:15:32536] [mhi_initiate_m0] Exited...
<6>[ 9867.649973] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 5 link 1, ring type 2, index 0 db 0x5fa26dd0
<6>[ 9867.650019] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9867.650117] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9867.650177] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9867.650230] [0:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9867.657593] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9867.661222] [1:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 8b
00 80 03 01 02 63 19 43 00 7f 00 02 04 00
<6>[ 9867.870326] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9867.870424] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[ 9867.870449] [0:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[ 9867.870477] [0:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9867.870678] [0:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[ 9868.872717] [0: kworker/u16:15:32536] [mhi_initiate_m3] Entered MHI state
4, Pending M0 0 Pending M3 0
<6>[ 9868.872785] [0: kworker/u16:15:32536] [mhi_initiate_m3] Triggering wake o
ut of M2
<6>[ 9868.883461] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26e10
<6>[ 9868.883522] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9868.883739] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9868.883790] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9868.883834] [0:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9868.887087] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9868.887207] [1: kworker/u16:15:32536] [mhi_initiate_m3] Cancelled M1 time
r, timer was active
<6>[ 9868.887446] [1: kworker/u16:15:32536] [mhi_initiate_m3] Waiting for M3 co
mpletion.
<6>[ 9868.900412] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9868.900638] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 5
<6>[ 9868.900688] [0:MHI_STATE_THREA: 4605] [process_M3_transition] Processing
M3 state transition
<6>[ 9868.900917] [1: kworker/u16:15:32536] [mhi_initiate_m3] M3 completion rec
eived
<6>[ 9868.900981] [1: kworker/u16:15:32536] [mhi_turn_off_pcie_link] Entered...
<6>[ 9868.912828] [1: kworker/u16:15:32536] mhi 0000:01:00.0: [debug] pmcsr reg
: b dev->current_state : 0
<6>[ 9868.913009] [1: kworker/u16:15:32536] mhi 0000:01:00.0: [debug] device_ve

ndor_id reg : 30017cb


<6>[ 9868.913118] [1: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: ack mes
sage is ok
<6>[ 9868.913164] [1: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: receive
d Enter_L23_READY DLLP packet
<6>[ 9868.913218] [1: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[ 9868.913369] [1: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[ 9868.943366] [1: kworker/u16:15:32536] [mhi_turn_off_pcie_link] Exited...
<6>[ 9869.326844] [2: kworker/u16:15:32536] vfsspi_work_func_debug ldo: 3, slee
p: 0, irq: 0, tz: 1, type: viper
<6>[ 9869.352888] [0: kworker/u16:15:32536] [SSP] debug_work_func: (61) - Senso
r state: 0x1fc3febf, RC: 1, CC: 0 DC: 0 TC: 0
<6>[ 9869.352958] [0: kworker/u16:15:32536] [SSP] 0 : -230, 5977, 2582 (200ms,
0ms)
<6>[ 9869.353005] [0: kworker/u16:15:32536] [SSP] 9 : 39, 30, 29, 90, 245, 3 (2
00ms)
<6>[ 9869.353045] [0: kworker/u16:15:32536] [SSP] 13 : 1(1ms)
<6>[ 9869.613596] I[2: irq/15-SSP_Int: 1775] [SSP] ssp_sensorhub_list(4): 1, 1,
7, -1
<6>[ 9869.613722] [2: irq/15-SSP_Int: 1775] [SSP] [M] SSP Rotation Mode 0
<6>[ 9869.613952] [3:ssp_sensorhub_t: 1783] wakeup source sensorhub activation
skipped
<6>[ 9869.616210] I[2:SensorHubServic: 3439] [SSP] ssp_sensorhub_read(4): 1, 1,
7, -1
<6>[ 9870.525445] I[0:
swapper/0:
0] exynos-pcie 10ee0000.pcie0: cp2ap_w
ake irq involked
<6>[ 9870.525616] [0:
kworker/0:1:25228] exynos-pcie 10ee0000.pcie0: PCIe: W
ake work for RC0
<6>[ 9870.525674] [0:
kworker/0:1:25228] exynos-pcie 10ee0000.pcie0: Callbac
k for the event : 4
<6>[ 9870.525716] [0:
kworker/0:1:25228] [mhi_link_state_cb] Received MSM_PC
IE_EVENT_WAKE
<6>[ 9870.526000] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 10
<6>[ 9870.526052] [1:MHI_STATE_THREA: 4605] [process_WAKE_transition] Entered
<6>[ 9870.526099] [1:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[ 9870.526150] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, start of poweron, pcie state: 0
<6>[ 9870.566536] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: D state
: 0, b63500
<6>[ 9870.586666] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_reset: Link up : 0x03865611
<6>[ 9870.587171] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, end of poweron, pcie state: 3
<6>[ 9870.599803] [2:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] pmcsr reg
: 8 dev->current_state : 3
<6>[ 9870.600146] [2:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9870.600202] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
y for the link of RC0
<6>[ 9870.600247] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
config space of RC0 and its EP
<6>[ 9870.600290] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
RC0
<6>[ 9870.600377] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
EP of RC0
<6>[ 9870.600841] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Refresh
ing the saved config space in PCI framework for RC0 and its EP

<6>[ 9870.606254] [2:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...


<6>[ 9870.606332] [2:MHI_STATE_THREA: 4605] [process_WAKE_transition] MHI is in
itialized, transitioning to M0.
<6>[ 9870.606383] [2:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Entered MHI state
5, Pending M0 0 Pending M3 0
<6>[ 9870.606430] [2:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Waiting for M0 M1
or M3. Currently 5...
<6>[ 9870.606474] [2:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Wait complete sta
te: 5
<6>[ 9870.606517] [2:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[ 9870.606557] [2:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[ 9870.606599] [2:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Setting M0 ...
<6>[ 9870.606832] [2:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Exited...
<6>[ 9870.606873] [2:MHI_STATE_THREA: 4605] [process_WAKE_transition] Exited.
<6>[ 9870.609274] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 5 link 1, ring type 2, index 0 db 0x5fa26e30
<6>[ 9870.609334] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9870.609560] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9870.609611] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9870.609658] [2:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9870.613647] [1:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 97 17 51 00 0e 00 14 06 00
<6>[ 9870.613814] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9870.615340] [3:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 64 19 4f 00 00 00
<6>[ 9870.628546] [1:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 64 19 4f 00 15 00 02 04 00
<6>[ 9870.837807] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9870.838068] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[ 9870.838124] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[ 9870.838185] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9870.838419] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[ 9871.172641] [2: irq/15-SSP_Int: 1775] [SSP] [M] AR-0,-640,3384,7582,180,2
0,0,0
<6>[ 9871.804638] [0: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26e80
<6>[ 9871.804677] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9871.804839] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9871.804864] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9871.804887] [2:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work was
cancelled
<6>[ 9871.805477] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9871.809075] [1:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 98 17 51 00 0e 00 14 06 00
<6>[ 9871.810410] [2:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 65 19 4f 00 00 00
<6>[ 9871.822043] [1:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 65 19 4f 00 15 00 02 04 00
<6>[ 9872.031114] [2: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0

<6>[ 9872.031393] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni


ng to 3
<6>[ 9872.031446] [0:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[ 9872.031504] [0:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9872.031737] [0:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[ 9872.905416] I[2: irq/15-SSP_Int: 1775] [SSP] ssp_sensorhub_list(4): 1, 1,
7, 0
<6>[ 9872.905542] [2: irq/15-SSP_Int: 1775] [SSP] [M] SSP Rotation Mode 0
<6>[ 9872.905757] [3:ssp_sensorhub_t: 1783] wakeup source sensorhub activation
skipped
<6>[ 9872.906013] I[2:SensorHubServic: 3439] [SSP] ssp_sensorhub_read(4): 1, 1,
7, 0
<6>[ 9873.032825] [3: kworker/u16:15:32536] [mhi_initiate_m3] Entered MHI state
4, Pending M0 0 Pending M3 0
<6>[ 9873.032908] [3: kworker/u16:15:32536] [mhi_initiate_m3] Triggering wake o
ut of M2
<6>[ 9873.034783] [2: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26ed0
<6>[ 9873.034848] [2: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9873.035062] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9873.035113] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9873.035159] [0:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9873.039353] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9873.039584] [1: kworker/u16:15:32536] [mhi_initiate_m3] Cancelled M1 time
r, timer was active
<6>[ 9873.039836] [1: kworker/u16:15:32536] [mhi_initiate_m3] Waiting for M3 co
mpletion.
<6>[ 9873.053102] [2: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9873.053393] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 5
<6>[ 9873.053444] [0:MHI_STATE_THREA: 4605] [process_M3_transition] Processing
M3 state transition
<6>[ 9873.053558] [1: kworker/u16:15:32536] [mhi_initiate_m3] M3 completion rec
eived
<6>[ 9873.053627] [1: kworker/u16:15:32536] [mhi_turn_off_pcie_link] Entered...
<6>[ 9873.066224] [1: kworker/u16:15:32536] mhi 0000:01:00.0: [debug] pmcsr reg
: b dev->current_state : 0
<6>[ 9873.066372] [1: kworker/u16:15:32536] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9873.066456] [1: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: ack mes
sage is ok
<6>[ 9873.066477] [1: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: receive
d Enter_L23_READY DLLP packet
<6>[ 9873.066505] [1: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[ 9873.066620] [1: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[ 9873.081407] I[0:
swapper/0:
0] exynos-pcie 10ee0000.pcie0: cp2ap_w
ake irq involked
<6>[ 9873.081522] [0:
kworker/0:1:25228] exynos-pcie 10ee0000.pcie0: PCIe: W
ake work for RC0
<6>[ 9873.081552] [0:
kworker/0:1:25228] exynos-pcie 10ee0000.pcie0: Callbac
k for the event : 4

<6>[ 9873.081572] [0:


kworker/0:1:25228] [mhi_link_state_cb] Received MSM_PC
IE_EVENT_WAKE
<6>[ 9873.081736] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 10
<6>[ 9873.081760] [2:MHI_STATE_THREA: 4605] [process_WAKE_transition] Entered
<6>[ 9873.096624] [1: kworker/u16:15:32536] [mhi_turn_off_pcie_link] Exited...
<6>[ 9873.096661] [2:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[ 9873.096710] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, start of poweron, pcie state: 0
<6>[ 9873.136592] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: D state
: 0, d65c00
<6>[ 9873.157392] [3:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_reset: Link up : 0x0399a811
<6>[ 9873.157902] [3:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, end of poweron, pcie state: 3
<6>[ 9873.170685] [3:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] pmcsr reg
: 8 dev->current_state : 3
<6>[ 9873.171003] [3:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9873.171060] [3:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
y for the link of RC0
<6>[ 9873.171105] [3:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
config space of RC0 and its EP
<6>[ 9873.171148] [3:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
RC0
<6>[ 9873.171237] [3:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
EP of RC0
<6>[ 9873.171750] [3:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Refresh
ing the saved config space in PCI framework for RC0 and its EP
<6>[ 9873.178194] [3:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[ 9873.178259] [3:MHI_STATE_THREA: 4605] [process_WAKE_transition] MHI is in
itialized, transitioning to M0.
<6>[ 9873.178307] [3:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Entered MHI state
5, Pending M0 0 Pending M3 0
<6>[ 9873.178355] [3:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Waiting for M0 M1
or M3. Currently 5...
<6>[ 9873.178399] [3:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Wait complete sta
te: 5
<6>[ 9873.178442] [3:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[ 9873.178482] [3:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[ 9873.178523] [3:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Setting M0 ...
<6>[ 9873.178755] [3:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Exited...
<6>[ 9873.178795] [3:MHI_STATE_THREA: 4605] [process_WAKE_transition] Exited.
<6>[ 9873.188373] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 5 link 1, ring type 2, index 0 db 0x5fa26ef0
<6>[ 9873.188449] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9873.188534] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 5 link 1, ring type 2, index 0 db 0x5fa26f00
<6>[ 9873.188561] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9873.188602] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9873.188640] [0:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9873.189287] [1:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 99 17 51 00 0e 00 14 06 00
<6>[ 9873.190072] [1:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 9a 17 51 00 0e 00 14 06 00
<6>[ 9873.192862] [3:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 66 19 4f 00 00 00

<6>[ 9873.194856] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Exited


<6>[ 9873.201849] [0:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 66 19 4f 00 15 00 02 04 00
<6>[ 9873.203395] [1:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 67 19 4f 00 00 00
<6>[ 9873.220313] [2:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 67 19 4f 00 15 00 02 04 00
<6>[ 9873.431260] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9873.431537] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[ 9873.431593] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[ 9873.431651] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9873.431884] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<7>[ 9873.695773] [0:companionshotTh:16366] [@][0][COM:V] fimc_is_comp_video_op
en
<7>[ 9873.696524] [0:companionshotTh:16366] [@][COM:D] fimc_is_companion_runtim
e_resume(0)
<7>[ 9873.696564] [0:companionshotTh:16366] [@][RSC] rsctype : 3, rsccount : 1
<7>[ 9873.696692] [0:companionshotTh:16366] [@][0][COM:D] fimc_is_companion_ope
n():0
<6>[ 9873.697382] [0:companionshotTh:16366] sclk_isp_sensor1 : 24Mhz
<6>[ 9873.697412] [0:companionshotTh:16366] exynos7420_fimc_is_companion_mclk_o
n(1, mclk : 24000000)
<7>[ 9873.697501] [3: kworker/u16:15:32536] [@] pin_ctrl(act(5), pin(0), val(1)
, nm(OIS_VDD_2.8V)
<7>[ 9873.697526] [3: kworker/u16:15:32536] [@] pin_ctrl(act(5), pin(0), val(1)
, nm(OIS_VM_2.8V)
<7>[ 9873.697545] [3: kworker/u16:15:32536] [@] pin_ctrl(act(1), pin(54), val(0
), nm(standby_low)
<7>[ 9873.697563] [3: kworker/u16:15:32536] [@] pin_ctrl(act(1), pin(52), val(0
), nm(rst_low)
<7>[ 9873.697581] [3: kworker/u16:15:32536] [@] pin_ctrl(act(5), pin(0), val(1)
, nm(VDDA_2.9V_VT)
<7>[ 9873.697598] [3: kworker/u16:15:32536] [@] pin_ctrl(act(5), pin(0), val(1)
, nm(VDDIO_1.8V_VT)
<7>[ 9873.697616] [3: kworker/u16:15:32536] [@] pin_ctrl(act(5), pin(0), val(1)
, nm(VDDD_1.2V_VT)
<7>[ 9873.697634] [3: kworker/u16:15:32536] [@] pin_ctrl(act(5), pin(0), val(1)
, nm(VDDIO_1.8V_CAM)
<7>[ 9873.701631] [0:companionshotTh:16366] [@][fimc_is_power_binning::1391][BI
N_INFO::4, sel 4] read path(/data/camera/ISP_CV), DCDC PMIC(0.750V)
<7>[ 9873.701665] [0:companionshotTh:16366] [@] pin_ctrl(act(5), pin(0), val(1)
, nm(VDDD_RET_1.0V_COMP)
<7>[ 9873.701683] [0:companionshotTh:16366] [@] pin_ctrl(act(5), pin(0), val(1)
, nm(VDDA_1.8V_COMP)
<7>[ 9873.701701] [0:companionshotTh:16366] [@] pin_ctrl(act(5), pin(0), val(1)
, nm(VDDD_CORE_1.0V_COMP)
<7>[ 9873.701719] [0:companionshotTh:16366] [@] pin_ctrl(act(5), pin(0), val(1)
, nm(VDDD_NORET_0.9V_COMP)
<7>[ 9873.701736] [0:companionshotTh:16366] [@] pin_ctrl(act(5), pin(0), val(1)
, nm(VDDD_CORE_0.8V_COMP)
<6>[ 9873.701858] [0:companionshotTh:16366] exynos_fimc_is_module_pin_control :
regulator_set_voltage(1000000)
<4>[ 9873.703159] [0:companionshotTh:16366] VDDD_RET_1.0V_COMP regulator is alr
eady enabled
<7>[ 9873.708894] [0:companionshotTh:16366] [@]Waiting Sensor power sequence...

<7>[ 9873.711056] [2:companionshotTh:16366] [@]workQueue is waited 17 times


<7>[ 9873.711093] [2:companionshotTh:16366] [@] pin_ctrl(act(1), pin(52), val(1
), nm(rst_high)
<7>[ 9873.711111] [2:companionshotTh:16366] [@] pin_ctrl(act(4), pin(0), val(2)
, nm(pin)
<7>[ 9873.711129] [2:companionshotTh:16366] [@] pin_ctrl(act(1), pin(55), val(1
), nm(comp_rst high)
<7>[ 9873.716182] [2:companionshotTh:16366] [@]already loaded the firmware, Pho
ne_Comp version=A16LSIJ0111, F-ROM_Comp version=A16LSIA0001
<7>[ 9873.717493] [2:companionshotTh:16366] [@]Companion validation: 0x73c2
<7>[ 9873.717516] [2:companionshotTh:16366] [@]fimc_is_comp_retention: start
<7>[ 9873.718894] [2:companionshotTh:16366] [@]0x0002 signature is same!
<7>[ 9873.721348] [3:companionshotTh:16366] [@]signature crc check success!
<7>[ 9873.724203] [3:companionshotTh:16366] [@]0x0002 signature is same!
<7>[ 9873.724325] [3:companionshotTh:16366] [@]fimc_is_companion_s_input: COMPA
NION STATE 1
<7>[ 9873.738491] [2:companionshotTh:16366] [@]companion_imx240_master_setfile.
bin version : A16LSIJ0111MASTR
<7>[ 9873.743351] [3:companionshotTh:16366] [@]companion_imx240_mode_setfile.bi
n version : A16LSIJ0111MOD00
<7>[ 9873.743991] [3:companionshotTh:16366] [@][0][COM:D] fimc_is_companion_s_i
nput(0, 21):0
<7>[ 9873.803895] [1:
Binder_1: 4610] [@][0][SS1:V] fimc_is_ssx_video_ope
n
<4>[ 9873.804638] [1:
Binder_1: 4610] vdd_disp_cam0: Failed to create deb
ugfs directory
<7>[ 9873.806304] [1:
Binder_1: 4610] [@][SEN:D:0] fimc_is_sensor_runtime
_resume():0
<7>[ 9873.806380] [1:
Binder_1: 4610] [@][RSC] rsctype : 0, rsccount : 2
<7>[ 9873.806420] [1:
Binder_1: 4610] [@][0][SEN:D] fimc_is_sensor_open()
:0
<7>[ 9873.806714] [1:
Binder_1: 4610] [@][0]fimc_is_sensor_mclk_on : sens
or mclk will on with companion mclk.
<7>[ 9873.807605] [1:
Binder_1: 4610] [@]fimc_is_sensor_gpio_on : sensor
gpio is already on.
<7>[ 9873.807663] [1:
Binder_1: 4610] [@][0][SEN:D] fimc_is_sensor_s_inpu
t(21, 0):0
<7>[ 9873.808300] [1:
Binder_1: 4610] [@][0][I0S:V] fimc_is_ixs_video_ope
n
<7>[ 9873.809562] [1:
Binder_1: 4610] [@][0][SCP:V] fimc_is_scp_video_ope
n
<7>[ 9873.810140] [1:
Binder_1: 4610] [@][0][I0P:V] fimc_is_ixp_video_ope
n
<7>[ 9873.810915] [1:
Binder_1: 4610] [@][0][30S:V] fimc_is_3aa_video_ope
n
<7>[ 9873.811884] [1:
Binder_1: 4610] [@][0][30C:V] fimc_is_3xc_video_ope
n
<7>[ 9873.812172] [1:
Binder_1: 4610] [@][0][30P:V] fimc_is_3xp_video_ope
n
<7>[ 9873.812698] [1:
Binder_1: 4610] [@][0][DIS:V] fimc_is_dis_video_ope
n
<7>[ 9873.813804] [1:
Binder_1: 4610] [@] fwboot : 0x0
<7>[ 9873.814520] [1:
Binder_1: 4610] [@]FIMC_IS runtime resume in
<7>[ 9873.820087] [1:
Binder_1: 4610] [@][RSC] fimc_is_ischain_runtime_re
sume: QoS LOCK [INT(560000), MIF(1456000), CAM(540000)]
<7>[ 9873.820790] [1:
Binder_1: 4610] [@]FIMC-IS runtime resume out
<7>[ 9873.820824] [1:
Binder_1: 4610] [@] fwboot : 0x0
<7>[ 9873.833693] [1:
Binder_1: 4610] [@]Phone FW version : 7420 16216-20
15/12/31 14:16:41]A16LSIL02SM
<7>[ 9873.834377] [1:
Binder_1: 4610] [@]Camera: the default FW were appl

ied successfully.
<7>[ 9873.834437] [1:
Binder_1: 4610] [@]fimc_is_ischain_config_secure :
PA_FIMC_IS_GIC_C : 0x000000f8
<7>[ 9873.834463] [1:
Binder_1: 4610] [@]fimc_is_ischain_power(1):0
<7>[ 9873.834481] [1:
Binder_1: 4610] [@][RSC] rsctype : 2, rsccount : 3
<7>[ 9873.834499] [1:
Binder_1: 4610] [@][0][ISC:D] fimc_is_ischain_open(
):0
<7>[ 9873.834717] [1:
Binder_1: 4610] [@][RSC] cluster1 minfreq : 0Mhz
<7>[ 9873.834738] [1:
Binder_1: 4610] [@][RSC] cluster1 maxfreq : 1800Mhz
<7>[ 9873.836471] [1:
Binder_1: 4610] [@][ERR]get_sensor_mode:322:could n
ot find proper sensor mode: 2608x1960@112fps
<7>[ 9873.836497] [1:
Binder_1: 4610] [@][SEN:D:0] framerate: req@112fps,
cur@112fps
<7>[ 9873.836680] [1:
Binder_1: 4610] [@]sensor mode(652x488@112) = 4
<7>[ 9873.839287] [1:
Binder_1: 4610] [@][0] =STM CFG===============
<7>[ 9873.839313] [1:
Binder_1: 4610] [@][0] STM(N) PH: 01 -> GP0 ( 11 *1
2 ) => GP2 ( *32 ) -> GP4 ( 52 )
<7>[ 9873.839331] [1:
Binder_1: 4610] [@][0] DEVICE GRAPH : 0 2 4
<7>[ 9873.839343] [0: kworker/0:2H:23569] [@]IS Version: 244.130 [0x03]
<7>[ 9873.839367] [1:
Binder_1: 4610] [@][0] =======================
<7>[ 9873.839387] [1:
Binder_1: 4610] [@]CAL DATA : MAP ver : V003
<7>[ 9873.839403] [1:
Binder_1: 4610] [@]Camera : Front Sensor Version :
0x11
<7>[ 9873.839421] [1:
Binder_1: 4610] [@]eeprom_fw_version = B05LLHA01PM,
phone_fw_version = A16LSIL02SM, loaded_fw_version = A16LSIL02SM
<7>[ 9873.839450] [1:
Binder_1: 4610] [@]Front Camera : the dumped Cal. d
ata was applied successfully.
<7>[ 9873.839475] [1:
Binder_1: 4610] [@][0]calibration loading is succes
s
<7>[ 9873.894405] [3:
Binder_1: 4610] [@]SETFILE version : 151016_S5K4E6_
CML_C2_10632 2015/10/16/14:44 E7420
<7>[ 9873.894745] [3:
Binder_1: 4610] [@]Camera: the default Setfile were
applied successfully.
<7>[ 9873.898920] [3:
Binder_1: 4610] [@][0][ISC:D] stream off ready
<7>[ 9873.905368] [3:
Binder_1: 4610] [@]input & output sizes are same(65
2, 488)
<7>[ 9873.905396] [3:
Binder_1: 4610] [@][0][SEN:D] fimc_is_sensor_back_s
tart(652x488, 0)
<7>[ 9873.905471] [3:
Binder_1: 4610] [@][0][GP2]bufs: 06, init : 0, asyn
: 1, skip: 0, sync : 0
<7>[ 9873.905551] [3:
Binder_1: 4610] [@][0][GP0]bufs: 06, init : 3, asyn
: 3, skip: 3, sync : 2
<7>[ 9873.905567] [3:
Binder_1: 4610] [@][0] =GRP CFG===============
<7>[ 9873.905584] [3:
Binder_1: 4610] [@][0][GP0] SRC10:0652x0488
<7>[ 9873.905600] [3:
Binder_1: 4610] [@][0][GP0] CAP11:0652x0652
<7>[ 9873.905616] [3:
Binder_1: 4610] [@][0][GP0] CAP12:0624x0468
<7>[ 9873.905635] [3:
Binder_1: 4610] [@][0][GP2] SRC30:0624x0468
<7>[ 9873.905654] [3:
Binder_1: 4610] [@][0][GP4] SRC50:0624x0468
<7>[ 9873.905670] [3:
Binder_1: 4610] [@][0][GP4] CAP52:0624x0468
<7>[ 9873.905687] [3:
Binder_1: 4610] [@][0] =======================
<7>[ 9873.905704] [3:
Binder_1: 4610] [@][0] TPU FULL BYPASS
<7>[ 9873.913199] [3:
Binder_1: 4610] [@][RSC] fimc_is_dvfs_sel_table(1):
0
<7>[ 9873.913224] [3:
Binder_1: 4610] [@][0][ISC:D] fimc_is_ischain_start
(33):0
<7>[ 9873.913949] [1:fimc_is_gworker:16383] [@][0][3XP][F1]ot_crop[0, 0, 624, 4
68] on
<7>[ 9873.913972] [1:fimc_is_gworker:16383] [@][0][3XP][WRN]1 frame is drop
<7>[ 9873.914547] [3:
Binder_1: 4610] [@][0][CSI] settle(652x488@112) = 2
2

<7>[ 9873.914569] [3:


Binder_1: 4610] [@][0][CSI] vci(0x32314742) = 1
<7>[ 9873.914944] [1:fimc_is_gworker:16383] [@][0][3XP][WRN]2 frame is drop
<7>[ 9873.915886] [1:fimc_is_gworker:16383] [@][0][3XP][WRN]3 frame is drop
<7>[ 9873.916136] [3:
Binder_1: 4610] [@][0][ISC:D] stream on ready(3, 3)
<7>[ 9873.916164] [3:
Binder_1: 4610] [@][WRN]couldn't find static dvfs s
cenario [sensor:(1/0)/fps:112/setfile:33/scp size:(624/468)]
<7>[ 9873.916164] [3:
Binder_1: 4610]
<7>[ 9873.916189] [3:
Binder_1: 4610] [@][0][ISC:D] tbl[1] static scenari
o(0)-[]
<7>[ 9873.949677] [3:
Binder_1: 4610] [@]DTP checking...
<7>[ 9873.950214] [1:fimc_is_gworker:16383] [@][0][3XP][WRN]4 frame is drop
<7>[ 9873.955532] [1:fimc_is_gworker:16383] [@][0][3XP][WRN]5 frame is drop
<7>[ 9873.964352] [1:fimc_is_gworker:16383] [@][0][3XP][WRN]6 frame is drop
<7>[ 9873.972430] I[0:
swapper/0:
0] [@]grp1(res 2, rcnt 0, scnt 6), grp
2(res 3, rcnt 0, scnt 0), fcount 7(0, 0) pcount 14
<7>[ 9873.980932] [0: kworker/0:2H:23569] [@][0][GP0][WRN] complete bufs : 4
<7>[ 9873.981347] I[0:
swapper/0:
0] [@]grp1(res 3, rcnt 0, scnt 6), grp
2(res 3, rcnt 0, scnt 0), fcount 8(0, 0) pcount 14
<7>[ 9873.989831] [0: kworker/0:2H:23569] [@][0][GP0][WRN] complete bufs : 5
<7>[ 9873.990273] I[0:
swapper/0:
0] [@]grp1(res 4, rcnt 0, scnt 6), grp
2(res 3, rcnt 0, scnt 0), fcount 9(0, 0) pcount 14
<7>[ 9873.990465] [3:
Binder_1: 4610] [@][0][ISC:D] stream off ready
<7>[ 9873.998833] [0: kworker/0:2H:23569] [@][0][GP0][WRN] complete bufs : 6
<7>[ 9874.010128] [3:
Binder_1: 4610] [@][0][FRT:D] fimc_is_sensor_front_
stop(0)
<7>[ 9874.010182] [3:
Binder_1: 4610] [@][FRT:D:0] instant off(fcount : 0
, time : 40ms)
<7>[ 9874.010282] [3:
Binder_1: 4610] [@][0][WRN]fimc_is_flite_stop, no w
aiting...
<7>[ 9874.010340] [3:
Binder_1: 4610] [@][0][BAK:D] fimc_is_sensor_back_s
top(0)
<7>[ 9874.010678] [3:
Binder_1: 4610] [@][0][WRN]video10 stream off : que
ued buffer is not empty(6)
<7>[ 9874.013867] [3:
Binder_1: 4610] [@][0][GP0] sensor fcount: 9, fcoun
t: 6
<7>[ 9874.013920] [3:
Binder_1: 4610] [@][0][GP0]fimc_is_ischain_3aa_stop
(6):0
<7>[ 9874.013962] [3:
Binder_1: 4610] [@][WRN]com frame1 is flushed(count
: 5)
<7>[ 9874.014000] [3:
Binder_1: 4610] [@][WRN]com frame2 is flushed(count
: 4)
<7>[ 9874.014038] [3:
Binder_1: 4610] [@][WRN]com frame3 is flushed(count
: 3)
<7>[ 9874.014074] [3:
Binder_1: 4610] [@][WRN]com frame4 is flushed(count
: 2)
<7>[ 9874.014111] [3:
Binder_1: 4610] [@][WRN]com frame5 is flushed(count
: 1)
<7>[ 9874.014148] [3:
Binder_1: 4610] [@][WRN]com frame6 is flushed(count
: 0)
<7>[ 9874.015574] [3:
Binder_1: 4610] [@][0][WRN]already process stop
<7>[ 9874.016350] [3:
Binder_1: 4610] [@][0][GP2]fimc_is_ischain_isp_stop
(0):0
<7>[ 9874.017169] [3:
Binder_1: 4610] [@]sensor mode(652x488@112) = 4
<7>[ 9874.017215] [3:
Binder_1: 4610] [@][SEN:D:0] framerate: req@30fps,
cur@30fps
<7>[ 9874.020043] [3:
Binder_1: 4610] [@]sensor mode(652x488@112) = 4
<7>[ 9874.020097] [3:
Binder_1: 4610] [@][SEN:D:0] framerate: req@30fps,
cur@30fps
<7>[ 9874.020496] [3:
Binder_1: 4610] [@]sensor mode(2608x1960@30) = 0
<7>[ 9874.028719] [3:
Binder_1: 4610] [@][0][GP2]bufs: 06, init : 0, asyn

: 1, skip: 0, sync : 0
<7>[ 9874.028959] [3:
Binder_1: 4610] [@][0][GP0]bufs: 06, init : 1, asyn
: 1, skip: 1, sync : 2
<7>[ 9874.029002] [3:
Binder_1: 4610] [@][0] =GRP CFG===============
<7>[ 9874.029044] [3:
Binder_1: 4610] [@][0][GP0] SRC10:2608x1960
<7>[ 9874.029084] [3:
Binder_1: 4610] [@][0][GP0] CAP11:2608x1960
<7>[ 9874.029123] [3:
Binder_1: 4610] [@][0][GP0] CAP12:1920x1080
<7>[ 9874.029286] [3:
Binder_1: 4610] [@][0][GP2] SRC30:1920x1080
<7>[ 9874.029338] [3:
Binder_1: 4610] [@][0][GP4] SRC50:1920x1080
<7>[ 9874.029380] [3:
Binder_1: 4610] [@][0][GP4] CAP52:0480x0270
<7>[ 9874.029419] [3:
Binder_1: 4610] [@][0] =======================
<7>[ 9874.029461] [3:
Binder_1: 4610] [@][0] TPU FULL BYPASS
<7>[ 9874.063017] [3:
Binder_1: 4610] [@][0][ISC:D] fimc_is_ischain_start
(33):0
<7>[ 9874.063361] [3:
Binder_1: 4610] [@]input & output sizes are same(26
08, 1960)
<7>[ 9874.063410] [3:
Binder_1: 4610] [@][0][SEN:D] fimc_is_sensor_back_s
tart(2608x1960, 0)
<7>[ 9874.065462] [1:fimc_is_gworker:16383] [@][0][3XS][F7]in_crop[0, 246, 2592
, 1458]
<7>[ 9874.065518] [1:fimc_is_gworker:16383] [@][0][3XS][F7]ot_crop[0, 0, 1920,
1080]
<7>[ 9874.065591] [1:fimc_is_gworker:16383] [@][0][3XP][F7]ot_crop[0, 0, 1920,
1080] on
<7>[ 9874.066660] [3:
Binder_1: 4610] [@][0][CSI] settle(2608x1960@30) =
22
<7>[ 9874.066714] [3:
Binder_1: 4610] [@][0][CSI] vci(0x32314742) = 1
<7>[ 9874.066808] [3:
Binder_1: 4610] [@][0][ISC:D] stream on ready(1, 1)
<7>[ 9874.066868] [3:
Binder_1: 4610] [@][WRN]couldn't find static dvfs s
cenario [sensor:(1/0)/fps:30/setfile:33/scp size:(480/270)]
<7>[ 9874.066868] [3:
Binder_1: 4610]
<7>[ 9874.066938] [3:
Binder_1: 4610] [@][0][ISC:D] tbl[1] static scenari
o(0)-[]
<7>[ 9874.194463] [1:fimc_is_gworker:16382] [@][0][SCP][F7]CRange:W
<7>[ 9874.194531] [1:fimc_is_gworker:16382] [@][0][SCP][F7]in_crop[0, 0, 1920,
1080]
<7>[ 9874.194574] [1:fimc_is_gworker:16382] [@][0][SCP][F7]ot_crop[0, 0, 480, 2
70]
<7>[ 9874.377744] [2: monitorThread:16401] [@]FIMC_IS_SYNC 74
<7>[ 9874.385916] [1:fimc_is_gworker:16382] [@][0][VRA][F10]bypass : 0
<6>[ 9874.432686] [2: kworker/u16:6:32449] [mhi_initiate_m3] Entered MHI state
4, Pending M0 0 Pending M3 0
<6>[ 9874.432751] [2: kworker/u16:6:32449] [mhi_initiate_m3] Triggering wake o
ut of M2
<6>[ 9874.443327] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26f70
<6>[ 9874.443395] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9874.443499] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9874.443549] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9874.443593] [2:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9874.444514] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9874.444538] [3: kworker/u16:6:32449] [mhi_initiate_m3] Cancelled M1 time
r, timer was active
<6>[ 9874.444667] [3: kworker/u16:6:32449] [mhi_initiate_m3] Waiting for M3 co
mpletion.
<6>[ 9874.453641] [1: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0

<6>[ 9874.453708] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni


ng to 5
<6>[ 9874.453733] [0:MHI_STATE_THREA: 4605] [process_M3_transition] Processing
M3 state transition
<6>[ 9874.453791] [3: kworker/u16:6:32449] [mhi_initiate_m3] M3 completion rec
eived
<6>[ 9874.453824] [3: kworker/u16:6:32449] [mhi_turn_off_pcie_link] Entered...
<6>[ 9874.465977] [3: kworker/u16:6:32449] mhi 0000:01:00.0: [debug] pmcsr reg
: b dev->current_state : 0
<6>[ 9874.466088] [3: kworker/u16:6:32449] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9874.466162] [3: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: ack mes
sage is ok
<6>[ 9874.466183] [3: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: receive
d Enter_L23_READY DLLP packet
<6>[ 9874.466208] [3: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[ 9874.466304] [3: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[ 9874.496291] [3: kworker/u16:6:32449] [mhi_turn_off_pcie_link] Exited...
<7>[ 9874.500712] [2:
Binder_2: 5177] [@][RSC] cluster1 minfreq : 0Mhz
<7>[ 9874.500746] [2:
Binder_2: 5177] [@][RSC] cluster1 maxfreq : 0Mhz
<7>[ 9874.511939] [0:
Binder_2: 5177] [@][0][ISC:D] stream off ready
<7>[ 9874.520036] [1:
Binder_2: 5177] [@][0][FRT:D] fimc_is_sensor_front_
stop(0)
<7>[ 9874.520217] [1:
Binder_2: 5177] [@][0][WRN]fimc_is_flite_stop, no w
aiting...
<7>[ 9874.520276] [1:
Binder_2: 5177] [@][0][BAK:D] fimc_is_sensor_back_s
top(0)
<7>[ 9874.520626] [1:
Binder_2: 5177] [@][0][WRN]video10 stream off : que
ued buffer is not empty(2)
<7>[ 9874.520671] [1:
Binder_2: 5177] [@][0][WRN] front is stopped, force
ly trigger(pc 15)
<7>[ 9874.520732] [1:fimc_is_gworker:16383] [@][0][GP0][WRN] cancel by fstop2
<7>[ 9874.520781] [1:fimc_is_gworker:16383] [@][0][3XP][F0][ERR] CANCEL(2)
<7>[ 9874.520827] [1:fimc_is_gworker:16383] [@][0][GP0][F14][ERR] CANCEL(2)
<7>[ 9874.520885] [1:
Binder_2: 5177] [@][0][GP0][WRN] 0 reqs waiting...
<7>[ 9874.543195] [0: kworker/0:2H:23569] [@][0][GP0][F14][ERR] NDONE(1, EF(L
0 H0))
<7>[ 9874.543277] [0: kworker/0:2H:23569] [@][0][3XP][F14][ERR] NDONE(1, E1)
<7>[ 9874.546033] [1:
Binder_2: 5177] [@][0][GP0] sensor fcount: 14, fcou
nt: 14
<7>[ 9874.546087] [1:
Binder_2: 5177] [@][0][GP0]fimc_is_ischain_3aa_stop
(8):0
<7>[ 9874.546130] [1:
Binder_2: 5177] [@][WRN]com frame14 is flushed(coun
t : 1)
<7>[ 9874.546167] [1:
Binder_2: 5177] [@][WRN]com frame14 is flushed(coun
t : 0)
<7>[ 9874.547377] [1:
Binder_2: 5177] [@][0][WRN]video12 stream off : que
ued buffer is not empty(2)
<7>[ 9874.547972] [1:
Binder_2: 5177] [@][0][WRN]already process stop
<7>[ 9874.548780] [1:
Binder_2: 5177] [@][0][GP2]fimc_is_ischain_isp_stop
(7):0
<7>[ 9874.577062] [2:
Binder_1: 4610] [@][RSC] rsctype : 3, rsccount : 2
<7>[ 9874.577097] [2:
Binder_1: 4610] [@][0][COM:D] fimc_is_companion_clo
se(0)
<7>[ 9874.577124] [2:
Binder_1: 4610] [@][0][COM:V] fimc_is_comp_video_cl
ose():0
<7>[ 9874.577398] [2:
Binder_1: 4610] [@][0][WRN]already back stop
<7>[ 9874.577417] [2:
Binder_1: 4610] [@][0][BAK:D] fimc_is_sensor_back_s

top(0)
<7>[ 9874.577435] [2:
Binder_1: 4610] [@][0][WRN]already front stop
<7>[ 9874.577452] [2:
Binder_1: 4610] [@][0][FRT:D] fimc_is_sensor_front_
stop(0)
<7>[ 9874.577502] [2:
Binder_1: 4610] [@][RSC] rsctype : 0, rsccount : 1
<7>[ 9874.577520] [2:
Binder_1: 4610] [@][0][SEN:D] fimc_is_sensor_close(
):0
<7>[ 9874.577552] [2:
Binder_1: 4610] [@][0][SS0:V] fimc_is_ssx_video_clo
se(0):0
<7>[ 9874.577751] [2:
Binder_1: 4610] [@][0][30P:V] fimc_is_3xp_video_clo
se(6,0):0
<7>[ 9874.577840] [2:
Binder_1: 4610] [@][0][30C:V] fimc_is_3xc_video_clo
se(5,0):0
<7>[ 9874.577917] [2:
Binder_1: 4610] [@][0][WRN]already group stop
<7>[ 9874.577935] [2:
Binder_1: 4610] [@][0][WRN]already stop
<7>[ 9874.577954] [2:
Binder_1: 4610] [@][0][GP0]fimc_is_ischain_3aa_stop
(8):0
<7>[ 9874.578161] [2:
Binder_1: 4610] [@][0][30S:V] fimc_is_3aa_video_clo
se(4,0):0
<7>[ 9874.578401] [2:
Binder_1: 4610] [@][0][SCP:V] fimc_is_scp_video_clo
se(3,0):0
<7>[ 9874.578478] [2:
Binder_1: 4610] [@][0][WRN]already group stop
<7>[ 9874.578497] [2:
Binder_1: 4610] [@][0][GP2]fimc_is_ischain_isp_stop
(7):0
<7>[ 9874.578645] [2:
Binder_1: 4610] [@][0][I0S:V] fimc_is_ixs_video_clo
se(2,0):0
<7>[ 9874.578740] [2:
Binder_1: 4610] [@][0][I0P:V] fimc_is_ixp_video_clo
se(1,0):0
<7>[ 9874.578949] [2:
Binder_1: 4610] [@][0][WRN]already group stop
<7>[ 9874.578968] [2:
Binder_1: 4610] [@][0][GP4]fimc_is_ischain_dis_stop
(0):0
<7>[ 9874.596694] [2:
Binder_1: 4610] [@]A5 state(0x2000)
<7>[ 9874.596754] [2:
Binder_1: 4610] [@]FIMC_IS runtime suspend in
<7>[ 9874.606889] [2:
Binder_1: 4610] [@]FIMC_IS runtime suspend out
<7>[ 9874.607626] [2:
kworker/2:2:13049] [@]fimc_is_sensor_gpio_off : compan
ion gpio is on. we will gpio off on device-companion
<7>[ 9874.607968] [2:
kworker/2:2:13049] [@]fimc_is_sensor_mclk_off : compan
ion clk is on. sensor mclk will off with companion mclk
<7>[ 9874.608022] [2:
kworker/2:2:13049] [@][SEN:D:0] fimc_is_sensor_runtime
_suspend():0
<7>[ 9874.608676] [2:
Binder_1: 4610] [@]fimc_is_ischain_power(0):0
<7>[ 9874.609656] [2:
kworker/2:2:13049] [@]fimc_is_companion_runtime_suspen
d
<7>[ 9874.609716] [2:
kworker/2:2:13049] [@] pin_ctrl(act(4), pin(0), val(0)
, nm(pin)
<7>[ 9874.609758] [2:
kworker/2:2:13049] [@] pin_ctrl(act(4), pin(0), val(1)
, nm(pin)
<7>[ 9874.609850] [2:
kworker/2:2:13049] [@] pin_ctrl(act(4), pin(0), val(0)
, nm(pin)
<7>[ 9874.609892] [2:
kworker/2:2:13049] [@] pin_ctrl(act(1), pin(52), val(0
), nm(rst_low)
<7>[ 9874.609932] [2:
kworker/2:2:13049] [@] pin_ctrl(act(1), pin(54), val(0
), nm(standby_low)
<7>[ 9874.609975] [2:
kworker/2:2:13049] [@] pin_ctrl(act(1), pin(55), val(0
), nm(comp_rst low)
<7>[ 9874.610015] [2:
kworker/2:2:13049] [@] pin_ctrl(act(5), pin(0), val(0)
, nm(VDDD_CORE_0.8V_COMP)
<7>[ 9874.610055] [2:
kworker/2:2:13049] [@] pin_ctrl(act(5), pin(0), val(0)
, nm(VDDD_NORET_0.9V_COMP)
<7>[ 9874.610095] [2:
kworker/2:2:13049] [@] pin_ctrl(act(5), pin(0), val(0)

, nm(VDDD_CORE_1.0V_COMP)
<7>[ 9874.610136] [2:
kworker/2:2:13049] [@] pin_ctrl(act(5), pin(0), val(0)
, nm(VDDA_1.8V_COMP)
<7>[ 9874.610175] [2:
kworker/2:2:13049] [@] pin_ctrl(act(5), pin(0), val(1)
, nm(VDDD_RET_1.0V_COMP)
<7>[ 9874.610215] [2:
kworker/2:2:13049] [@] pin_ctrl(act(5), pin(0), val(0)
, nm(VDDD_1.2V_VT)
<7>[ 9874.610253] [2:
kworker/2:2:13049] [@] pin_ctrl(act(5), pin(0), val(0)
, nm(VDDA_2.9V_VT)
<7>[ 9874.610293] [2:
kworker/2:2:13049] [@] pin_ctrl(act(5), pin(0), val(0)
, nm(VDDIO_1.8V_VT)
<7>[ 9874.610333] [2:
kworker/2:2:13049] [@] pin_ctrl(act(5), pin(0), val(0)
, nm(VDDIO_1.8V_CAM)
<7>[ 9874.610373] [2:
kworker/2:2:13049] [@] pin_ctrl(act(5), pin(0), val(0)
, nm(OIS_VDD_2.8V)
<7>[ 9874.610412] [2:
kworker/2:2:13049] [@] pin_ctrl(act(5), pin(0), val(0)
, nm(OIS_VM_2.8V)
<6>[ 9874.616163] [2:
kworker/2:2:13049] exynos_fimc_is_module_pin_control :
regulator_set_voltage(700000)
<4>[ 9874.617504] [2:
kworker/2:2:13049] VDDD_RET_1.0V_COMP regulator is alr
eady enabled
<7>[ 9874.630693] [2:
kworker/2:2:13049] [@]fimc_is_companion_gpio_off: COMP
ANION STATE 2
<7>[ 9874.631333] [2:
kworker/2:2:13049] [@][COM:D] fimc_is_companion_runtim
e_suspend(0)
<7>[ 9874.632043] [0:
Binder_1: 4610] [@][RSC] rsctype : 2, rsccount : 0
<7>[ 9874.632303] [0:
Binder_1: 4610] [@][0][ISC:D] fimc_is_ischain_close
():0
<7>[ 9874.632382] [0:
Binder_1: 4610] [@][0][DIS:V] fimc_is_dis_video_clo
se(0,0):0
<6>[ 9875.120858] [2: irq/15-SSP_Int: 1775] [SSP] [M] AR-0,4,5918,5604,180,20,0
,0
<6>[ 9877.731525] [1:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 68 19 43 00 00 00
<6>[ 9877.731634] [1:
qmuxd: 3399] [mhi_wake_dev_from_m3] Initiating M
0 work...
<6>[ 9877.731848] [2: kworker/u16:6:32449] [m0_work] No pending resume, initia
ting M0.
<6>[ 9877.731878] [2: kworker/u16:6:32449] [mhi_initiate_m0] Entered MHI state
5, Pending M0 0 Pending M3 0
<6>[ 9877.731902] [2: kworker/u16:6:32449] [mhi_initiate_m0] Waiting for M0 M1
or M3. Currently 5...
<6>[ 9877.731926] [2: kworker/u16:6:32449] [mhi_initiate_m0] Wait complete sta
te: 5
<6>[ 9877.731950] [2: kworker/u16:6:32449] [mhi_turn_on_pcie_link] Entered...
<6>[ 9877.731984] [2: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, start of poweron, pcie state: 0
<6>[ 9877.769870] [2: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: D state
: 0, 1f3a00
<6>[ 9877.789950] [3: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: exynos_
pcie_reset: Link up : 0x03bb5511
<6>[ 9877.790438] [3: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, end of poweron, pcie state: 3
<6>[ 9877.802932] [3: kworker/u16:6:32449] mhi 0000:01:00.0: [debug] pmcsr reg
: 8 dev->current_state : 3
<6>[ 9877.803097] [3: kworker/u16:6:32449] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9877.803147] [3: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: Recover
y for the link of RC0
<6>[ 9877.803192] [3: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: Recover

config space of RC0 and its EP


<6>[ 9877.803235] [3: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: Recover
RC0
<6>[ 9877.803323] [3: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: Recover
EP of RC0
<6>[ 9877.803789] [3: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: Refresh
ing the saved config space in PCI framework for RC0 and its EP
<6>[ 9877.809129] [3: kworker/u16:6:32449] [mhi_turn_on_pcie_link] Exited...
<6>[ 9877.809231] [3: kworker/u16:6:32449] [mhi_initiate_m0] Setting M0 ...
<6>[ 9877.809480] [3: kworker/u16:6:32449] [mhi_initiate_m0] Exited...
<6>[ 9877.812916] [1: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 5 link 1, ring type 2, index 0 db 0x5fa26f90
<6>[ 9877.812987] [1: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9877.813260] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9877.813313] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9877.813360] [0:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9877.817961] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9877.826110] [2:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 9f
00 80 03 01 02 68 19 43 00 93 00 02 04 00
<6>[ 9878.035360] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9878.035637] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[ 9878.035689] [0:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[ 9878.035748] [0:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9878.036054] [0:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[ 9878.200672] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26fd0
<6>[ 9878.200749] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9878.201052] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9878.201105] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9878.201151] [1:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work was
cancelled
<6>[ 9878.205033] [0:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 9b 17 51 00 0e 00 14 06 00
<6>[ 9878.205595] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9878.207216] [1:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 69 19 4f 00 00 00
<6>[ 9878.214163] [0:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 69 19 4f 00 15 00 02 04 00
<6>[ 9878.423308] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9878.423582] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[ 9878.423638] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[ 9878.423695] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9878.423930] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[ 9879.251549] [2: irq/15-SSP_Int: 1775] [SSP] [M] AR-0,165,5967,5581,180,20
,0,0

<6>[ 9879.426105] [1: kworker/u16:6:32449] [mhi_initiate_m3] Entered MHI state


4, Pending M0 0 Pending M3 0
<6>[ 9879.426186] [1: kworker/u16:6:32449] [mhi_initiate_m3] Triggering wake o
ut of M2
<6>[ 9879.428185] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa27020
<6>[ 9879.428251] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9879.428483] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9879.428535] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9879.428579] [1:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9879.433304] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9879.433488] [2: kworker/u16:6:32449] [mhi_initiate_m3] Cancelled M1 time
r, timer was active
<6>[ 9879.433807] [2: kworker/u16:6:32449] [mhi_initiate_m3] Waiting for M3 co
mpletion.
<6>[ 9879.446951] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9879.447209] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 5
<6>[ 9879.447263] [1:MHI_STATE_THREA: 4605] [process_M3_transition] Processing
M3 state transition
<6>[ 9879.447482] [2: kworker/u16:6:32449] [mhi_initiate_m3] M3 completion rec
eived
<6>[ 9879.447551] [2: kworker/u16:6:32449] [mhi_turn_off_pcie_link] Entered...
<6>[ 9879.459521] [2: kworker/u16:6:32449] mhi 0000:01:00.0: [debug] pmcsr reg
: b dev->current_state : 0
<6>[ 9879.459695] [2: kworker/u16:6:32449] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9879.459813] [2: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: ack mes
sage is ok
<6>[ 9879.459859] [2: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: receive
d Enter_L23_READY DLLP packet
<6>[ 9879.459913] [2: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[ 9879.460091] [2: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[ 9879.490095] [2: kworker/u16:6:32449] [mhi_turn_off_pcie_link] Exited...
<6>[ 9880.339458] [0: kworker/u16:6:32449] [SSP] debug_work_func: (64) - Senso
r state: 0x1fc3febf, RC: 1, CC: 0 DC: 0 TC: 0
<6>[ 9880.339526] [0: kworker/u16:6:32449] [SSP] 0 : 152, 6022, 5623 (200ms, 0
ms)
<6>[ 9880.339573] [0: kworker/u16:6:32449] [SSP] 9 : 39, 31, 32, 90, 245, 3 (2
00ms)
<6>[ 9880.339612] [0: kworker/u16:6:32449] [SSP] 13 : 1(1ms)
<6>[ 9880.339684] [0: kworker/u16:6:32449] vfsspi_work_func_debug ldo: 3, slee
p: 0, irq: 0, tz: 1, type: viper
<6>[ 9882.042244] I[0:
swapper/0:
0] exynos-pcie 10ee0000.pcie0: cp2ap_w
ake irq involked
<6>[ 9882.042375] [0:
kworker/0:1:25228] exynos-pcie 10ee0000.pcie0: PCIe: W
ake work for RC0
<6>[ 9882.042434] [0:
kworker/0:1:25228] exynos-pcie 10ee0000.pcie0: Callbac
k for the event : 4
<6>[ 9882.042537] [0:
kworker/0:1:25228] [mhi_link_state_cb] Received MSM_PC
IE_EVENT_WAKE
<6>[ 9882.042730] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 10
<6>[ 9882.042785] [1:MHI_STATE_THREA: 4605] [process_WAKE_transition] Entered

<6>[ 9882.042831] [1:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...


<6>[ 9882.042884] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, start of poweron, pcie state: 0
<6>[ 9882.083018] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: D state
: 0, 70d800
<6>[ 9882.104111] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_reset: Link up : 0x03740a11
<6>[ 9882.104588] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, end of poweron, pcie state: 3
<6>[ 9882.116355] [1:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] pmcsr reg
: 8 dev->current_state : 3
<6>[ 9882.116682] [1:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9882.116739] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
y for the link of RC0
<6>[ 9882.116784] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
config space of RC0 and its EP
<6>[ 9882.116827] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
RC0
<6>[ 9882.116915] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
EP of RC0
<6>[ 9882.117378] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Refresh
ing the saved config space in PCI framework for RC0 and its EP
<6>[ 9882.122730] [1:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[ 9882.122802] [1:MHI_STATE_THREA: 4605] [process_WAKE_transition] MHI is in
itialized, transitioning to M0.
<6>[ 9882.122851] [1:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Entered MHI state
5, Pending M0 0 Pending M3 0
<6>[ 9882.122901] [1:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Waiting for M0 M1
or M3. Currently 5...
<6>[ 9882.122946] [1:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Wait complete sta
te: 5
<6>[ 9882.122989] [1:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[ 9882.123030] [1:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[ 9882.123072] [1:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Setting M0 ...
<6>[ 9882.123305] [1:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Exited...
<6>[ 9882.123347] [1:MHI_STATE_THREA: 4605] [process_WAKE_transition] Exited.
<6>[ 9882.126520] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 5 link 1, ring type 2, index 0 db 0x5fa27040
<6>[ 9882.126601] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9882.126820] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9882.126872] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9882.126917] [1:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9882.130593] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9882.131597] [0:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 9c 17 51 00 0e 00 14 06 00
<6>[ 9882.135493] [1:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 6a 19 4f 00 00 00
<6>[ 9882.145111] [0:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 6a 19 4f 00 15 00 02 04 00
<6>[ 9882.303180] [2: irq/15-SSP_Int: 1775] [SSP] [M] PD: BaroDisabled
<6>[ 9882.354123] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9882.354403] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[ 9882.354445] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3

<6>[ 9882.354495] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr


ansition to M2
<6>[ 9882.354718] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[ 9883.201772] [2: irq/15-SSP_Int: 1775] [SSP] [M] AR-0,314,6064,5490,180,20
,0,0
<6>[ 9883.320792] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa27090
<6>[ 9883.320874] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9883.321138] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9883.321190] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9883.321234] [1:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work was
cancelled
<6>[ 9883.325256] [0:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 9d 17 51 00 0e 00 14 06 00
<6>[ 9883.325775] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9883.327115] [1:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 6b 19 4f 00 00 00
<6>[ 9883.334288] [0:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 6b 19 4f 00 15 00 02 04 00
<6>[ 9883.543382] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9883.543670] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[ 9883.543725] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[ 9883.543784] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9883.544019] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[ 9884.546133] [1: kworker/u16:6:32449] [mhi_initiate_m3] Entered MHI state
4, Pending M0 0 Pending M3 0
<6>[ 9884.546212] [1: kworker/u16:6:32449] [mhi_initiate_m3] Triggering wake o
ut of M2
<6>[ 9884.548176] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa270e0
<6>[ 9884.548235] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9884.548466] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9884.548516] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9884.548560] [1:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9884.552757] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9884.552930] [2: kworker/u16:6:32449] [mhi_initiate_m3] Cancelled M1 time
r, timer was active
<6>[ 9884.553172] [2: kworker/u16:6:32449] [mhi_initiate_m3] Waiting for M3 co
mpletion.
<6>[ 9884.566590] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9884.566854] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 5
<6>[ 9884.566905] [1:MHI_STATE_THREA: 4605] [process_M3_transition] Processing
M3 state transition
<6>[ 9884.567125] [2: kworker/u16:6:32449] [mhi_initiate_m3] M3 completion rec
eived
<6>[ 9884.567191] [2: kworker/u16:6:32449] [mhi_turn_off_pcie_link] Entered...
<6>[ 9884.579449] [2: kworker/u16:6:32449] mhi 0000:01:00.0: [debug] pmcsr reg

: b dev->current_state : 0
<6>[ 9884.579642] [2: kworker/u16:6:32449] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9884.579758] [2: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: ack mes
sage is ok
<6>[ 9884.579804] [2: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: receive
d Enter_L23_READY DLLP packet
<6>[ 9884.579859] [2: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[ 9884.580037] [2: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[ 9884.601400] I[0:
swapper/0:
0] exynos-pcie 10ee0000.pcie0: cp2ap_w
ake irq involked
<6>[ 9884.601485] [0:
kworker/0:1:25228] exynos-pcie 10ee0000.pcie0: PCIe: W
ake work for RC0
<6>[ 9884.601515] [0:
kworker/0:1:25228] exynos-pcie 10ee0000.pcie0: Callbac
k for the event : 4
<6>[ 9884.601534] [0:
kworker/0:1:25228] [mhi_link_state_cb] Received MSM_PC
IE_EVENT_WAKE
<6>[ 9884.601712] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 10
<6>[ 9884.601737] [1:MHI_STATE_THREA: 4605] [process_WAKE_transition] Entered
<6>[ 9884.610034] [2: kworker/u16:6:32449] [mhi_turn_off_pcie_link] Exited...
<6>[ 9884.610046] [1:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[ 9884.610067] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, start of poweron, pcie state: 0
<6>[ 9884.649909] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: D state
: 0, 874e00
<6>[ 9884.670171] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_reset: Link up : 0x0366d311
<6>[ 9884.670671] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, end of poweron, pcie state: 3
<6>[ 9884.682997] [1:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] pmcsr reg
: 8 dev->current_state : 3
<6>[ 9884.683159] [1:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9884.683212] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
y for the link of RC0
<6>[ 9884.683257] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
config space of RC0 and its EP
<6>[ 9884.683300] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
RC0
<6>[ 9884.683386] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
EP of RC0
<6>[ 9884.683852] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Refresh
ing the saved config space in PCI framework for RC0 and its EP
<6>[ 9884.689215] [1:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[ 9884.689271] [1:MHI_STATE_THREA: 4605] [process_WAKE_transition] MHI is in
itialized, transitioning to M0.
<6>[ 9884.689320] [1:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Entered MHI state
5, Pending M0 0 Pending M3 0
<6>[ 9884.689367] [1:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Waiting for M0 M1
or M3. Currently 5...
<6>[ 9884.689412] [1:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Wait complete sta
te: 5
<6>[ 9884.689457] [1:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[ 9884.689495] [1:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[ 9884.689537] [1:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Setting M0 ...
<6>[ 9884.689770] [1:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Exited...
<6>[ 9884.689812] [1:MHI_STATE_THREA: 4605] [process_WAKE_transition] Exited.

<6>[ 9884.693091] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring


DB state 5 link 1, ring type 2, index 0 db 0x5fa27100
<6>[ 9884.693166] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9884.693298] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9884.693353] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9884.693400] [1:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9884.704434] [2:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 9e 17 51 00 0e 00 14 06 00
<6>[ 9884.705139] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9884.706571] [1:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 6c 19 4f 00 00 00
<6>[ 9884.722211] [2:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 6c 19 4f 00 15 00 02 04 00
<6>[ 9884.931387] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9884.931686] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[ 9884.931740] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[ 9884.931801] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9884.932037] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<4>[ 9885.449563] I[0:
swapper/0:
0] DHCP - 0x108 [RX]
<7>[ 9885.647135] [2:companionshotTh:16465] [@][0][COM:V] fimc_is_comp_video_op
en
<7>[ 9885.648058] [2:companionshotTh:16465] [@][COM:D] fimc_is_companion_runtim
e_resume(0)
<7>[ 9885.648133] [2:companionshotTh:16465] [@][RSC] rsctype : 3, rsccount : 1
<7>[ 9885.648376] [2:companionshotTh:16465] [@][0][COM:D] fimc_is_companion_ope
n():0
<6>[ 9885.649788] [2:companionshotTh:16465] sclk_isp_sensor1 : 24Mhz
<6>[ 9885.649845] [2:companionshotTh:16465] exynos7420_fimc_is_companion_mclk_o
n(1, mclk : 24000000)
<7>[ 9885.651051] [1: kworker/u16:6:32449] [@] pin_ctrl(act(5), pin(0), val(1)
, nm(OIS_VDD_2.8V)
<7>[ 9885.651110] [1: kworker/u16:6:32449] [@] pin_ctrl(act(5), pin(0), val(1)
, nm(OIS_VM_2.8V)
<7>[ 9885.651150] [1: kworker/u16:6:32449] [@] pin_ctrl(act(1), pin(54), val(0
), nm(standby_low)
<7>[ 9885.651191] [1: kworker/u16:6:32449] [@] pin_ctrl(act(1), pin(52), val(0
), nm(rst_low)
<7>[ 9885.651229] [1: kworker/u16:6:32449] [@] pin_ctrl(act(5), pin(0), val(1)
, nm(VDDA_2.9V_VT)
<7>[ 9885.651271] [1: kworker/u16:6:32449] [@] pin_ctrl(act(5), pin(0), val(1)
, nm(VDDIO_1.8V_VT)
<7>[ 9885.651310] [1: kworker/u16:6:32449] [@] pin_ctrl(act(5), pin(0), val(1)
, nm(VDDD_1.2V_VT)
<7>[ 9885.651349] [1: kworker/u16:6:32449] [@] pin_ctrl(act(5), pin(0), val(1)
, nm(VDDIO_1.8V_CAM)
<7>[ 9885.652346] [2:companionshotTh:16465] [@][fimc_is_power_binning::1391][BI
N_INFO::4, sel 4] read path(/data/camera/ISP_CV), DCDC PMIC(0.750V)
<7>[ 9885.652413] [2:companionshotTh:16465] [@] pin_ctrl(act(5), pin(0), val(1)
, nm(VDDD_RET_1.0V_COMP)
<7>[ 9885.652454] [2:companionshotTh:16465] [@] pin_ctrl(act(5), pin(0), val(1)
, nm(VDDA_1.8V_COMP)
<7>[ 9885.652567] [2:companionshotTh:16465] [@] pin_ctrl(act(5), pin(0), val(1)

, nm(VDDD_CORE_1.0V_COMP)
<7>[ 9885.652611] [2:companionshotTh:16465] [@] pin_ctrl(act(5), pin(0), val(1)
, nm(VDDD_NORET_0.9V_COMP)
<7>[ 9885.652650] [2:companionshotTh:16465] [@] pin_ctrl(act(5), pin(0), val(1)
, nm(VDDD_CORE_0.8V_COMP)
<6>[ 9885.652887] [2:companionshotTh:16465] exynos_fimc_is_module_pin_control :
regulator_set_voltage(1000000)
<4>[ 9885.656039] [1:companionshotTh:16465] VDDD_RET_1.0V_COMP regulator is alr
eady enabled
<7>[ 9885.666182] [0:companionshotTh:16465] [@]Waiting Sensor power sequence...
<7>[ 9885.669746] [2:companionshotTh:16465] [@]workQueue is waited 23 times
<7>[ 9885.669782] [2:companionshotTh:16465] [@] pin_ctrl(act(1), pin(52), val(1
), nm(rst_high)
<7>[ 9885.669801] [2:companionshotTh:16465] [@] pin_ctrl(act(4), pin(0), val(2)
, nm(pin)
<7>[ 9885.669819] [2:companionshotTh:16465] [@] pin_ctrl(act(1), pin(55), val(1
), nm(comp_rst high)
<7>[ 9885.674803] [2:companionshotTh:16465] [@]already loaded the firmware, Pho
ne_Comp version=A16LSIJ0111, F-ROM_Comp version=A16LSIA0001
<7>[ 9885.676209] [2:companionshotTh:16465] [@]Companion validation: 0x73c2
<7>[ 9885.676239] [2:companionshotTh:16465] [@]fimc_is_comp_retention: start
<7>[ 9885.676797] [2:companionshotTh:16465] [@]0x0002 signature is same!
<7>[ 9885.679128] [2:companionshotTh:16465] [@]signature crc check success!
<7>[ 9885.682024] [2:companionshotTh:16465] [@]0x0002 signature is same!
<7>[ 9885.682146] [2:companionshotTh:16465] [@]fimc_is_companion_s_input: COMPA
NION STATE 1
<7>[ 9885.685854] [2:companionshotTh:16465] [@]companion_imx240_master_setfile.
bin version : A16LSIJ0111MASTR
<7>[ 9885.690406] [0:companionshotTh:16465] [@]companion_imx240_mode_setfile.bi
n version : A16LSIJ0111MOD00
<7>[ 9885.690745] [0:companionshotTh:16465] [@][0][COM:D] fimc_is_companion_s_i
nput(0, 21):0
<6>[ 9885.719970] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [P] tID:0 tc:1 tm
:0
<7>[ 9885.723660] [6:
mediaserver: 3369] [@][0][SS1:V] fimc_is_ssx_video_ope
n
<4>[ 9885.723977] [6:
mediaserver: 3369] vdd_disp_cam0: Failed to create deb
ugfs directory
<7>[ 9885.725114] [6:
mediaserver: 3369] [@][SEN:D:0] fimc_is_sensor_runtime
_resume():0
<7>[ 9885.725132] [6:
mediaserver: 3369] [@][RSC] rsctype : 0, rsccount : 2
<7>[ 9885.725144] [6:
mediaserver: 3369] [@][0][SEN:D] fimc_is_sensor_open()
:0
<7>[ 9885.725211] [6:
mediaserver: 3369] [@][0]fimc_is_sensor_mclk_on : sens
or mclk will on with companion mclk.
<7>[ 9885.725642] [6:
mediaserver: 3369] [@]fimc_is_sensor_gpio_on : sensor
gpio is already on.
<7>[ 9885.725658] [6:
mediaserver: 3369] [@][0][SEN:D] fimc_is_sensor_s_inpu
t(21, 0):0
<7>[ 9885.725826] [6:
mediaserver: 3369] [@][0][I0S:V] fimc_is_ixs_video_ope
n
<7>[ 9885.726129] [4:
mediaserver: 3369] [@][0][SCP:V] fimc_is_scp_video_ope
n
<7>[ 9885.726227] [4:
mediaserver: 3369] [@][0][I0P:V] fimc_is_ixp_video_ope
n
<7>[ 9885.726373] [4:
mediaserver: 3369] [@][0][30S:V] fimc_is_3aa_video_ope
n
<7>[ 9885.726613] [6:
mediaserver: 3369] [@][0][30C:V] fimc_is_3xc_video_ope
n
<7>[ 9885.726702] [6:
mediaserver: 3369] [@][0][30P:V] fimc_is_3xp_video_ope

n
<7>[ 9885.726859] [6:
mediaserver: 3369] [@][0][DIS:V] fimc_is_dis_video_ope
n
<7>[ 9885.727238] [4:
mediaserver: 3369] [@] fwboot : 0x0
<7>[ 9885.727815] [4:
mediaserver: 3369] [@]FIMC_IS runtime resume in
<7>[ 9885.733178] [7:
mediaserver: 3369] [@][RSC] fimc_is_ischain_runtime_re
sume: QoS LOCK [INT(560000), MIF(1456000), CAM(540000)]
<7>[ 9885.733734] [7:
mediaserver: 3369] [@]FIMC-IS runtime resume out
<7>[ 9885.733753] [7:
mediaserver: 3369] [@] fwboot : 0x0
<6>[ 9885.735869] [0: thread_hotplug:14070] frequency info : 800000, prev_cmd 0
, exe_cmd 4
<6>[ 9885.735896] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9885.735915] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<7>[ 9885.743326] [7:
mediaserver: 3369] [@]Phone FW version : 7420 16216-20
15/12/31 14:16:41]A16LSIL02SM
<7>[ 9885.743751] [7:
mediaserver: 3369] [@]Camera: the default FW were appl
ied successfully.
<7>[ 9885.743803] [7:
mediaserver: 3369] [@]fimc_is_ischain_config_secure :
PA_FIMC_IS_GIC_C : 0x000000f8
<7>[ 9885.743822] [7:
mediaserver: 3369] [@]fimc_is_ischain_power(1):0
<7>[ 9885.743834] [7:
mediaserver: 3369] [@][RSC] rsctype : 2, rsccount : 3
<7>[ 9885.743846] [7:
mediaserver: 3369] [@][0][ISC:D] fimc_is_ischain_open(
):0
<7>[ 9885.743972] [7:
mediaserver: 3369] [@][RSC] cluster1 minfreq : 0Mhz
<7>[ 9885.743987] [7:
mediaserver: 3369] [@][RSC] cluster1 maxfreq : 1800Mhz
<7>[ 9885.744811] [7:
mediaserver: 3369] [@][ERR]get_sensor_mode:322:could n
ot find proper sensor mode: 2608x1960@112fps
<7>[ 9885.744827] [7:
mediaserver: 3369] [@][SEN:D:0] framerate: req@112fps,
cur@112fps
<7>[ 9885.744918] [7:
mediaserver: 3369] [@]sensor mode(652x488@112) = 4
<7>[ 9885.746067] [7:
mediaserver: 3369] [@][0] =STM CFG===============
<7>[ 9885.746082] [7:
mediaserver: 3369] [@][0] STM(N) PH: 01 -> GP0 ( 11 *1
2 ) => GP2 ( *32 ) -> GP4 ( 52 )
<7>[ 9885.746094] [7:
mediaserver: 3369] [@][0] DEVICE GRAPH : 0 2 4
<7>[ 9885.746105] [7:
mediaserver: 3369] [@][0] =======================
<7>[ 9885.746118] [7:
mediaserver: 3369] [@]CAL DATA : MAP ver : V003
<7>[ 9885.746128] [7:
mediaserver: 3369] [@]Camera : Front Sensor Version :
0x11
<7>[ 9885.746141] [7:
mediaserver: 3369] [@]eeprom_fw_version = B05LLHA01PM,
phone_fw_version = A16LSIL02SM, loaded_fw_version = A16LSIL02SM
<7>[ 9885.746159] [7:
mediaserver: 3369] [@]Front Camera : the dumped Cal. d
ata was applied successfully.
<7>[ 9885.746173] [7:
mediaserver: 3369] [@][0]calibration loading is succes
s
<7>[ 9885.748776] [0: kworker/0:2H:23569] [@]IS Version: 244.130 [0x03]
<6>[ 9885.778054] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [R] tID:0 mc: 4 t
c:0 Ver[005683000]
<7>[ 9885.803497] [7:
mediaserver: 3369] [@]SETFILE version : 151016_S5K4E6_
CML_C2_10632 2015/10/16/14:44 E7420
<7>[ 9885.803688] [7:
mediaserver: 3369] [@]Camera: the default Setfile were
applied successfully.
<7>[ 9885.807836] [7:
mediaserver: 3369] [@][0][ISC:D] stream off ready
<7>[ 9885.814019] [7:
mediaserver: 3369] [@]input & output sizes are same(65
2, 488)
<7>[ 9885.814037] [7:
mediaserver: 3369] [@][0][SEN:D] fimc_is_sensor_back_s
tart(652x488, 0)
<7>[ 9885.814082] [7:
mediaserver: 3369] [@][0][GP2]bufs: 06, init : 0, asyn
: 1, skip: 0, sync : 0
<7>[ 9885.814129] [7:
mediaserver: 3369] [@][0][GP0]bufs: 06, init : 3, asyn

: 3, skip: 3, sync : 2
<7>[ 9885.814141] [7:
mediaserver: 3369] [@][0] =GRP CFG===============
<7>[ 9885.814153] [7:
mediaserver: 3369] [@][0][GP0] SRC10:0652x0488
<7>[ 9885.814164] [7:
mediaserver: 3369] [@][0][GP0] CAP11:0652x0652
<7>[ 9885.814175] [7:
mediaserver: 3369] [@][0][GP0] CAP12:0624x0468
<7>[ 9885.814188] [7:
mediaserver: 3369] [@][0][GP2] SRC30:0624x0468
<7>[ 9885.814201] [7:
mediaserver: 3369] [@][0][GP4] SRC50:0624x0468
<7>[ 9885.814212] [7:
mediaserver: 3369] [@][0][GP4] CAP52:0624x0468
<7>[ 9885.814223] [7:
mediaserver: 3369] [@][0] =======================
<7>[ 9885.814235] [7:
mediaserver: 3369] [@][0] TPU FULL BYPASS
<7>[ 9885.821488] [5:
mediaserver: 3369] [@][RSC] fimc_is_dvfs_sel_table(1):
0
<7>[ 9885.821508] [5:
mediaserver: 3369] [@][0][ISC:D] fimc_is_ischain_start
(33):0
<7>[ 9885.822202] [0:fimc_is_gworker:16482] [@][0][3XP][F1]ot_crop[0, 0, 624, 4
68] on
<7>[ 9885.822228] [0:fimc_is_gworker:16482] [@][0][3XP][WRN]1 frame is drop
<7>[ 9885.822413] [5:
mediaserver: 3369] [@][0][CSI] settle(652x488@112) = 2
2
<7>[ 9885.822429] [5:
mediaserver: 3369] [@][0][CSI] vci(0x32314742) = 1
<7>[ 9885.823119] [0:fimc_is_gworker:16482] [@][0][3XP][WRN]2 frame is drop
<7>[ 9885.824000] [0:fimc_is_gworker:16482] [@][0][3XP][WRN]3 frame is drop
<7>[ 9885.824101] [5:
mediaserver: 3369] [@][0][ISC:D] stream on ready(3, 3)
<7>[ 9885.824121] [5:
mediaserver: 3369] [@][WRN]couldn't find static dvfs s
cenario [sensor:(1/0)/fps:112/setfile:33/scp size:(624/468)]
<7>[ 9885.824121] [5:
mediaserver: 3369]
<7>[ 9885.824142] [5:
mediaserver: 3369] [@][0][ISC:D] tbl[1] static scenari
o(0)-[]
<7>[ 9885.857072] [1:
mediaserver: 3369] [@]DTP checking...
<7>[ 9885.857529] [0:fimc_is_gworker:16482] [@][0][3XP][WRN]4 frame is drop
<7>[ 9885.862792] [0:fimc_is_gworker:16482] [@][0][3XP][WRN]5 frame is drop
<7>[ 9885.871674] [0:fimc_is_gworker:16482] [@][0][3XP][WRN]6 frame is drop
<7>[ 9885.879858] I[0:
Binder_F: 6547] [@]grp1(res 2, rcnt 0, scnt 6), grp
2(res 3, rcnt 0, scnt 0), fcount 7(0, 0) pcount 14
<6>[ 9885.880501] [0: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa27150
<6>[ 9885.880531] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9885.880567] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9885.880583] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9885.880598] [1:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work was
cancelled
<6>[ 9885.881176] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9885.885349] [2:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 9f 17 51 00 0e 00 14 06 00
<6>[ 9885.886248] [3:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 6d 19 4f 00 00 00
<7>[ 9885.888193] [0: kworker/0:2H:23569] [@][0][GP0][WRN] complete bufs : 4
<7>[ 9885.888773] I[0:
cat:16496] [@]grp1(res 3, rcnt 0, scnt 6), grp
2(res 3, rcnt 0, scnt 0), fcount 8(0, 0) pcount 14
<7>[ 9885.897158] [0: kworker/0:2H:23569] [@][0][GP0][WRN] complete bufs : 5
<6>[ 9885.897563] [1:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 6d 19 4f 00 15 00 02 04 00
<7>[ 9885.897679] I[0:
cat:16496] [@]grp1(res 4, rcnt 0, scnt 6), grp
2(res 3, rcnt 0, scnt 0), fcount 9(0, 0) pcount 14
<7>[ 9885.897716] [2:
mediaserver: 3369] [@][0][ISC:D] stream off ready
<7>[ 9885.906050] [0: kworker/0:2H:23569] [@][0][GP0][WRN] complete bufs : 6
<7>[ 9885.917257] [1:
mediaserver: 3369] [@][0][FRT:D] fimc_is_sensor_front_
stop(0)

<7>[ 9885.917280] [1:


mediaserver: 3369]
, time : 40ms)
<7>[ 9885.917327] [1:
mediaserver: 3369]
aiting...
<7>[ 9885.917355] [1:
mediaserver: 3369]
top(0)
<7>[ 9885.917511] [1:
mediaserver: 3369]
ued buffer is not empty(6)
<7>[ 9885.921029] [1:
mediaserver: 3369]
t: 6
<7>[ 9885.921054] [1:
mediaserver: 3369]
(6):0
<7>[ 9885.921069] [1:
mediaserver: 3369]
: 5)
<7>[ 9885.921080] [1:
mediaserver: 3369]
: 4)
<7>[ 9885.921092] [1:
mediaserver: 3369]
: 3)
<7>[ 9885.921103] [1:
mediaserver: 3369]
: 2)
<7>[ 9885.921115] [1:
mediaserver: 3369]
: 1)
<7>[ 9885.921126] [1:
mediaserver: 3369]
: 0)
<7>[ 9885.922043] [3:
mediaserver: 3369]
<7>[ 9885.922557] [3:
mediaserver: 3369]
(0):0
<7>[ 9885.923204] [3:
mediaserver: 3369]
<7>[ 9885.923227] [3:
mediaserver: 3369]
cur@30fps
<7>[ 9885.930774] [3:
mediaserver: 3369]
<7>[ 9885.930796] [3:
mediaserver: 3369]
cur@30fps
<7>[ 9885.930940] [3:
mediaserver: 3369]
<7>[ 9885.933865] [3:
mediaserver: 3369]
: 1, skip: 0, sync : 0
<7>[ 9885.933967] [3:
mediaserver: 3369]
: 1, skip: 1, sync : 2
<7>[ 9885.933980] [3:
mediaserver: 3369]
<7>[ 9885.933994] [3:
mediaserver: 3369]
<7>[ 9885.934006] [3:
mediaserver: 3369]
<7>[ 9885.934019] [3:
mediaserver: 3369]
<7>[ 9885.934035] [3:
mediaserver: 3369]
<7>[ 9885.934050] [3:
mediaserver: 3369]
<7>[ 9885.934063] [3:
mediaserver: 3369]
<7>[ 9885.934077] [3:
mediaserver: 3369]
<7>[ 9885.934091] [3:
mediaserver: 3369]
<6>[ 9885.935872] [0: thread_hotplug:14070]
0, exe_cmd 4
<6>[ 9885.935895] [0: thread_hotplug:14070]
dm_hotplug disable = 0
<6>[ 9885.935907] [0: thread_hotplug:14070]
<7>[ 9885.966039] [1:
mediaserver: 3369]
(33):0
<7>[ 9885.966219] [1:
mediaserver: 3369]
08, 1960)
<7>[ 9885.966236] [1:
mediaserver: 3369]
tart(2608x1960, 0)
<7>[ 9885.967567] [0:fimc_is_gworker:16482]
, 1458]

[@][FRT:D:0] instant off(fcount : 0


[@][0][WRN]fimc_is_flite_stop, no w
[@][0][BAK:D] fimc_is_sensor_back_s
[@][0][WRN]video10 stream off : que
[@][0][GP0] sensor fcount: 9, fcoun
[@][0][GP0]fimc_is_ischain_3aa_stop
[@][WRN]com frame1 is flushed(count
[@][WRN]com frame2 is flushed(count
[@][WRN]com frame3 is flushed(count
[@][WRN]com frame4 is flushed(count
[@][WRN]com frame5 is flushed(count
[@][WRN]com frame6 is flushed(count
[@][0][WRN]already process stop
[@][0][GP2]fimc_is_ischain_isp_stop
[@]sensor mode(652x488@112) = 4
[@][SEN:D:0] framerate: req@30fps,
[@]sensor mode(652x488@112) = 4
[@][SEN:D:0] framerate: req@30fps,
[@]sensor mode(2608x1960@30) = 0
[@][0][GP2]bufs: 06, init : 0, asyn
[@][0][GP0]bufs: 06, init : 1, asyn
[@][0] =GRP CFG===============
[@][0][GP0] SRC10:2608x1960
[@][0][GP0] CAP11:2608x1960
[@][0][GP0] CAP12:1920x1080
[@][0][GP2] SRC30:1920x1080
[@][0][GP4] SRC50:1920x1080
[@][0][GP4] CAP52:0480x0270
[@][0] =======================
[@][0] TPU FULL BYPASS
frequency info : 1296000, prev_cmd
lcd is on : 1, low power mode = 0,
cluster1 cores hotplug out : 0
[@][0][ISC:D] fimc_is_ischain_start
[@]input & output sizes are same(26
[@][0][SEN:D] fimc_is_sensor_back_s
[@][0][3XS][F7]in_crop[0, 246, 2592

<7>[ 9885.967590] [0:fimc_is_gworker:16482] [@][0][3XS][F7]ot_crop[0, 0, 1920,


1080]
<7>[ 9885.967622] [0:fimc_is_gworker:16482] [@][0][3XP][F7]ot_crop[0, 0, 1920,
1080] on
<7>[ 9885.968460] [1:
mediaserver: 3369] [@][0][CSI] settle(2608x1960@30) =
22
<7>[ 9885.968483] [1:
mediaserver: 3369] [@][0][CSI] vci(0x32314742) = 1
<7>[ 9885.968548] [1:
mediaserver: 3369] [@][0][ISC:D] stream on ready(1, 1)
<7>[ 9885.968572] [1:
mediaserver: 3369] [@][WRN]couldn't find static dvfs s
cenario [sensor:(1/0)/fps:30/setfile:33/scp size:(480/270)]
<7>[ 9885.968572] [1:
mediaserver: 3369]
<7>[ 9885.968593] [1:
mediaserver: 3369] [@][0][ISC:D] tbl[1] static scenari
o(0)-[]
<7>[ 9886.083973] [0:fimc_is_gworker:16481] [@][0][SCP][F7]CRange:W
<7>[ 9886.084001] [0:fimc_is_gworker:16481] [@][0][SCP][F7]in_crop[0, 0, 1920,
1080]
<7>[ 9886.084013] [0:fimc_is_gworker:16481] [@][0][SCP][F7]ot_crop[0, 0, 480, 2
70]
<6>[ 9886.106333] [2: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9886.106374] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[ 9886.106388] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[ 9886.106424] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9886.106616] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<7>[ 9886.242016] [0:fimc_is_gworker:16481] [@][0][VRA][F10]bypass : 0
<7>[ 9886.260522] [2: monitorThread:16522] [@]FIMC_IS_SYNC 75
<7>[ 9886.423374] [2:
Binder_1: 4610] [@][RSC] cluster1 minfreq : 0Mhz
<7>[ 9886.423426] [2:
Binder_1: 4610] [@][RSC] cluster1 maxfreq : 0Mhz
<7>[ 9886.438328] [0:
Binder_1: 4610] [@][0][ISC:D] stream off ready
<7>[ 9886.459457] [1:
Binder_1: 4610] [@][0][FRT:D] fimc_is_sensor_front_
stop(0)
<7>[ 9886.459643] [1:
Binder_1: 4610] [@][0][WRN]fimc_is_flite_stop, no w
aiting...
<7>[ 9886.459702] [1:
Binder_1: 4610] [@][0][BAK:D] fimc_is_sensor_back_s
top(0)
<7>[ 9886.460061] [1:
Binder_1: 4610] [@][0][WRN]video10 stream off : que
ued buffer is not empty(2)
<7>[ 9886.460106] [1:
Binder_1: 4610] [@][0][WRN] front is stopped, force
ly trigger(pc 15)
<7>[ 9886.460164] [1:
Binder_1: 4610] [@][0][GP0][WRN] 1 reqs waiting...
<7>[ 9886.460255] [0:fimc_is_gworker:16482] [@][0][GP0][WRN] cancel by fstop2
<7>[ 9886.460309] [0:fimc_is_gworker:16482] [@][0][3XP][F0][ERR] CANCEL(4)
<7>[ 9886.460355] [0:fimc_is_gworker:16482] [@][0][GP0][F16][ERR] CANCEL(4)
<7>[ 9886.483122] [0: kworker/0:2H:23569] [@][0][GP0][F16][ERR] NDONE(3, EF(L
0 H0))
<7>[ 9886.483205] [0: kworker/0:2H:23569] [@][0][3XP][F16][ERR] NDONE(3, E1)
<7>[ 9886.487167] [3:
Binder_1: 4610] [@][0][GP0] sensor fcount: 16, fcou
nt: 16
<7>[ 9886.487227] [3:
Binder_1: 4610] [@][0][GP0]fimc_is_ischain_3aa_stop
(10):0
<7>[ 9886.487269] [3:
Binder_1: 4610] [@][WRN]com frame16 is flushed(coun
t : 1)
<7>[ 9886.487307] [3:
Binder_1: 4610] [@][WRN]com frame16 is flushed(coun
t : 0)
<7>[ 9886.488413] [1:
Binder_1: 4610] [@][0][WRN]video12 stream off : que
ued buffer is not empty(2)

<7>[ 9886.488989] [1:


Binder_1: 4610] [@][0][WRN]already process stop
<7>[ 9886.489690] [2:
Binder_1: 4610] [@][0][GP2]fimc_is_ischain_isp_stop
(8):0
<7>[ 9886.521800] [1:
mediaserver: 3369] [@][RSC] rsctype : 3, rsccount : 2
<7>[ 9886.521833] [1:
mediaserver: 3369] [@][0][COM:D] fimc_is_companion_clo
se(0)
<7>[ 9886.521860] [1:
mediaserver: 3369] [@][0][COM:V] fimc_is_comp_video_cl
ose():0
<7>[ 9886.522115] [1:
mediaserver: 3369] [@][0][WRN]already back stop
<7>[ 9886.522134] [1:
mediaserver: 3369] [@][0][BAK:D] fimc_is_sensor_back_s
top(0)
<7>[ 9886.522151] [1:
mediaserver: 3369] [@][0][WRN]already front stop
<7>[ 9886.522168] [1:
mediaserver: 3369] [@][0][FRT:D] fimc_is_sensor_front_
stop(0)
<7>[ 9886.522215] [1:
mediaserver: 3369] [@][RSC] rsctype : 0, rsccount : 1
<7>[ 9886.522233] [1:
mediaserver: 3369] [@][0][SEN:D] fimc_is_sensor_close(
):0
<7>[ 9886.522265] [1:
mediaserver: 3369] [@][0][SS0:V] fimc_is_ssx_video_clo
se(0):0
<7>[ 9886.522460] [1:
mediaserver: 3369] [@][0][30P:V] fimc_is_3xp_video_clo
se(6,0):0
<7>[ 9886.522617] [1:
mediaserver: 3369] [@][0][30C:V] fimc_is_3xc_video_clo
se(5,0):0
<7>[ 9886.522696] [1:
mediaserver: 3369] [@][0][WRN]already group stop
<7>[ 9886.522714] [1:
mediaserver: 3369] [@][0][WRN]already stop
<7>[ 9886.522733] [1:
mediaserver: 3369] [@][0][GP0]fimc_is_ischain_3aa_stop
(10):0
<7>[ 9886.522978] [1:
mediaserver: 3369] [@][0][30S:V] fimc_is_3aa_video_clo
se(4,0):0
<7>[ 9886.523250] [1:
mediaserver: 3369] [@][0][SCP:V] fimc_is_scp_video_clo
se(3,0):0
<7>[ 9886.523328] [1:
mediaserver: 3369] [@][0][WRN]already group stop
<7>[ 9886.523348] [1:
mediaserver: 3369] [@][0][GP2]fimc_is_ischain_isp_stop
(8):0
<7>[ 9886.523558] [1:
mediaserver: 3369] [@][0][I0S:V] fimc_is_ixs_video_clo
se(2,0):0
<7>[ 9886.523657] [1:
mediaserver: 3369] [@][0][I0P:V] fimc_is_ixp_video_clo
se(1,0):0
<7>[ 9886.523868] [1:
mediaserver: 3369] [@][0][WRN]already group stop
<7>[ 9886.523887] [1:
mediaserver: 3369] [@][0][GP4]fimc_is_ischain_dis_stop
(0):0
<7>[ 9886.541855] [1:
mediaserver: 3369] [@]A5 state(0x2000)
<7>[ 9886.541902] [1:
mediaserver: 3369] [@]FIMC_IS runtime suspend in
<7>[ 9886.548385] [2:
mediaserver: 3369] [@]FIMC_IS runtime suspend out
<7>[ 9886.549011] [2:
kworker/2:2:13049] [@]fimc_is_sensor_gpio_off : compan
ion gpio is on. we will gpio off on device-companion
<7>[ 9886.549299] [2:
kworker/2:2:13049] [@]fimc_is_sensor_mclk_off : compan
ion clk is on. sensor mclk will off with companion mclk
<7>[ 9886.549328] [2:
kworker/2:2:13049] [@][SEN:D:0] fimc_is_sensor_runtime
_suspend():0
<7>[ 9886.549806] [2:
mediaserver: 3369] [@]fimc_is_ischain_power(0):0
<7>[ 9886.550687] [2:
kworker/2:2:13049] [@]fimc_is_companion_runtime_suspen
d
<7>[ 9886.550714] [2:
kworker/2:2:13049] [@] pin_ctrl(act(4), pin(0), val(0)
, nm(pin)
<7>[ 9886.550731] [2:
kworker/2:2:13049] [@] pin_ctrl(act(4), pin(0), val(1)
, nm(pin)
<7>[ 9886.550749] [2:
kworker/2:2:13049] [@] pin_ctrl(act(4), pin(0), val(0)
, nm(pin)
<7>[ 9886.550767] [2:
kworker/2:2:13049] [@] pin_ctrl(act(1), pin(52), val(0

), nm(rst_low)
<7>[ 9886.550785] [2:
kworker/2:2:13049] [@] pin_ctrl(act(1), pin(54), val(0
), nm(standby_low)
<7>[ 9886.550803] [2:
kworker/2:2:13049] [@] pin_ctrl(act(1), pin(55), val(0
), nm(comp_rst low)
<7>[ 9886.550821] [2:
kworker/2:2:13049] [@] pin_ctrl(act(5), pin(0), val(0)
, nm(VDDD_CORE_0.8V_COMP)
<7>[ 9886.550838] [2:
kworker/2:2:13049] [@] pin_ctrl(act(5), pin(0), val(0)
, nm(VDDD_NORET_0.9V_COMP)
<7>[ 9886.550856] [2:
kworker/2:2:13049] [@] pin_ctrl(act(5), pin(0), val(0)
, nm(VDDD_CORE_1.0V_COMP)
<7>[ 9886.550899] [2:
kworker/2:2:13049] [@] pin_ctrl(act(5), pin(0), val(0)
, nm(VDDA_1.8V_COMP)
<7>[ 9886.550917] [2:
kworker/2:2:13049] [@] pin_ctrl(act(5), pin(0), val(1)
, nm(VDDD_RET_1.0V_COMP)
<7>[ 9886.550936] [2:
kworker/2:2:13049] [@] pin_ctrl(act(5), pin(0), val(0)
, nm(VDDD_1.2V_VT)
<7>[ 9886.550953] [2:
kworker/2:2:13049] [@] pin_ctrl(act(5), pin(0), val(0)
, nm(VDDA_2.9V_VT)
<7>[ 9886.550971] [2:
kworker/2:2:13049] [@] pin_ctrl(act(5), pin(0), val(0)
, nm(VDDIO_1.8V_VT)
<7>[ 9886.550989] [2:
kworker/2:2:13049] [@] pin_ctrl(act(5), pin(0), val(0)
, nm(VDDIO_1.8V_CAM)
<7>[ 9886.551007] [2:
kworker/2:2:13049] [@] pin_ctrl(act(5), pin(0), val(0)
, nm(OIS_VDD_2.8V)
<7>[ 9886.551024] [2:
kworker/2:2:13049] [@] pin_ctrl(act(5), pin(0), val(0)
, nm(OIS_VM_2.8V)
<6>[ 9886.555282] [2:
kworker/2:2:13049] exynos_fimc_is_module_pin_control :
regulator_set_voltage(700000)
<4>[ 9886.556700] [2:
kworker/2:2:13049] VDDD_RET_1.0V_COMP regulator is alr
eady enabled
<7>[ 9886.570060] [2:
kworker/2:2:13049] [@]fimc_is_companion_gpio_off: COMP
ANION STATE 2
<7>[ 9886.570412] [2:
kworker/2:2:13049] [@][COM:D] fimc_is_companion_runtim
e_suspend(0)
<7>[ 9886.571676] [0:
mediaserver: 3369] [@][RSC] rsctype : 2, rsccount : 0
<7>[ 9886.571809] [0:
mediaserver: 3369] [@][0][ISC:D] fimc_is_ischain_close
():0
<7>[ 9886.571852] [0:
mediaserver: 3369] [@][0][DIS:V] fimc_is_dis_video_clo
se(0,0):0
<6>[ 9887.109398] [1: kworker/u16:6:32449] [mhi_initiate_m3] Entered MHI state
4, Pending M0 0 Pending M3 0
<6>[ 9887.109475] [1: kworker/u16:6:32449] [mhi_initiate_m3] Triggering wake o
ut of M2
<6>[ 9887.120539] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa260a0
<6>[ 9887.120606] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9887.120848] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9887.120900] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9887.120946] [1:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9887.125596] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9887.125764] [2: kworker/u16:6:32449] [mhi_initiate_m3] Cancelled M1 time
r, timer was active
<6>[ 9887.126091] [2: kworker/u16:6:32449] [mhi_initiate_m3] Waiting for M3 co
mpletion.
<6>[ 9887.139128] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0

<6>[ 9887.139485] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni


ng to 5
<6>[ 9887.139541] [1:MHI_STATE_THREA: 4605] [process_M3_transition] Processing
M3 state transition
<6>[ 9887.139789] [2: kworker/u16:6:32449] [mhi_initiate_m3] M3 completion rec
eived
<6>[ 9887.139857] [2: kworker/u16:6:32449] [mhi_turn_off_pcie_link] Entered...
<6>[ 9887.151810] [2: irq/15-SSP_Int: 1775] [SSP] [M] AR-0,215,6180,5312,180,20
,0,0
<6>[ 9887.152779] [2: kworker/u16:6:32449] mhi 0000:01:00.0: [debug] pmcsr reg
: b dev->current_state : 0
<6>[ 9887.152980] [2: kworker/u16:6:32449] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9887.153095] [2: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: ack mes
sage is ok
<6>[ 9887.153141] [2: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: receive
d Enter_L23_READY DLLP packet
<6>[ 9887.153196] [2: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[ 9887.153368] [2: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[ 9887.163871] I[0:
swapper/0:
0] exynos-pcie 10ee0000.pcie0: cp2ap_w
ake irq involked
<6>[ 9887.164021] [0:
kworker/0:1:25228] exynos-pcie 10ee0000.pcie0: PCIe: W
ake work for RC0
<6>[ 9887.164079] [0:
kworker/0:1:25228] exynos-pcie 10ee0000.pcie0: Callbac
k for the event : 4
<6>[ 9887.164121] [0:
kworker/0:1:25228] [mhi_link_state_cb] Received MSM_PC
IE_EVENT_WAKE
<6>[ 9887.164382] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 10
<6>[ 9887.164435] [1:MHI_STATE_THREA: 4605] [process_WAKE_transition] Entered
<6>[ 9887.183366] [2: kworker/u16:6:32449] [mhi_turn_off_pcie_link] Exited...
<6>[ 9887.183380] [1:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[ 9887.183408] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, start of poweron, pcie state: 0
<6>[ 9887.223180] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: D state
: 0, 712400
<6>[ 9887.245459] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_reset: Link up : 0x0335a111
<6>[ 9887.246029] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, end of poweron, pcie state: 3
<6>[ 9887.259605] [1:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] pmcsr reg
: 8 dev->current_state : 3
<6>[ 9887.259785] [1:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9887.259838] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
y for the link of RC0
<6>[ 9887.259883] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
config space of RC0 and its EP
<6>[ 9887.259926] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
RC0
<6>[ 9887.260014] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
EP of RC0
<6>[ 9887.260476] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Refresh
ing the saved config space in PCI framework for RC0 and its EP
<6>[ 9887.266018] [1:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[ 9887.266082] [1:MHI_STATE_THREA: 4605] [process_WAKE_transition] MHI is in
itialized, transitioning to M0.
<6>[ 9887.266131] [1:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Entered MHI state

5, Pending M0 0 Pending M3 0
<6>[ 9887.266178] [1:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Waiting for M0 M1
or M3. Currently 5...
<6>[ 9887.266223] [1:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Wait complete sta
te: 5
<6>[ 9887.266265] [1:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[ 9887.266305] [1:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[ 9887.266347] [1:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Setting M0 ...
<6>[ 9887.266582] [1:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Exited...
<6>[ 9887.266622] [1:MHI_STATE_THREA: 4605] [process_WAKE_transition] Exited.
<6>[ 9887.268561] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 5 link 1, ring type 2, index 0 db 0x5fa260c0
<6>[ 9887.268619] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9887.268835] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9887.268884] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9887.268930] [1:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9887.272632] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9887.273166] [1:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 a0 17 51 00 0e 00 14 06 00
<6>[ 9887.275180] [3:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 6e 19 4f 00 00 00
<6>[ 9887.287672] [1:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 6e 19 4f 00 15 00 02 04 00
<6>[ 9887.496892] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9887.497149] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[ 9887.497203] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[ 9887.497262] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9887.497496] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<4>[ 9888.472616] I[0:
swapper/0:
0] DHCP - 0x108 [RX]
<6>[ 9888.499413] [1: kworker/u16:6:32449] [mhi_initiate_m3] Entered MHI state
4, Pending M0 0 Pending M3 0
<6>[ 9888.499492] [1: kworker/u16:6:32449] [mhi_initiate_m3] Triggering wake o
ut of M2
<6>[ 9888.501444] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26110
<6>[ 9888.501502] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9888.501730] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9888.501782] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9888.501826] [1:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9888.506322] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9888.506490] [2: kworker/u16:6:32449] [mhi_initiate_m3] Cancelled M1 time
r, timer was active
<6>[ 9888.506733] [2: kworker/u16:6:32449] [mhi_initiate_m3] Waiting for M3 co
mpletion.
<6>[ 9888.519805] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9888.520049] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 5
<6>[ 9888.520100] [1:MHI_STATE_THREA: 4605] [process_M3_transition] Processing

M3 state transition
<6>[ 9888.520324] [2: kworker/u16:6:32449] [mhi_initiate_m3] M3 completion rec
eived
<6>[ 9888.520388] [2: kworker/u16:6:32449] [mhi_turn_off_pcie_link] Entered...
<6>[ 9888.532892] [2: kworker/u16:6:32449] mhi 0000:01:00.0: [debug] pmcsr reg
: b dev->current_state : 0
<6>[ 9888.533086] [2: kworker/u16:6:32449] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9888.533202] [2: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: ack mes
sage is ok
<6>[ 9888.533248] [2: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: receive
d Enter_L23_READY DLLP packet
<6>[ 9888.533304] [2: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[ 9888.533481] [2: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[ 9888.563484] [2: kworker/u16:6:32449] [mhi_turn_off_pcie_link] Exited...
<4>[ 9890.466010] I[0:
swapper/0:
0] DHCP - 0x108 [RX]
<6>[ 9891.002168] I[0:
swapper/0:
0] exynos-pcie 10ee0000.pcie0: cp2ap_w
ake irq involked
<6>[ 9891.002355] [0:
kworker/0:1:25228] exynos-pcie 10ee0000.pcie0: PCIe: W
ake work for RC0
<6>[ 9891.002414] [0:
kworker/0:1:25228] exynos-pcie 10ee0000.pcie0: Callbac
k for the event : 4
<6>[ 9891.002456] [0:
kworker/0:1:25228] [mhi_link_state_cb] Received MSM_PC
IE_EVENT_WAKE
<6>[ 9891.002787] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 10
<6>[ 9891.002840] [1:MHI_STATE_THREA: 4605] [process_WAKE_transition] Entered
<6>[ 9891.002885] [1:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[ 9891.002938] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, start of poweron, pcie state: 0
<6>[ 9891.043195] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: D state
: 0, 789600
<6>[ 9891.061021] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_reset: Link up : 0x03482511
<6>[ 9891.061514] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, end of poweron, pcie state: 3
<6>[ 9891.072924] [1:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] pmcsr reg
: 8 dev->current_state : 3
<6>[ 9891.073094] [1:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9891.073144] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
y for the link of RC0
<6>[ 9891.073189] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
config space of RC0 and its EP
<6>[ 9891.073232] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
RC0
<6>[ 9891.073320] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
EP of RC0
<6>[ 9891.073784] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Refresh
ing the saved config space in PCI framework for RC0 and its EP
<6>[ 9891.079134] [1:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[ 9891.079224] [1:MHI_STATE_THREA: 4605] [process_WAKE_transition] MHI is in
itialized, transitioning to M0.
<6>[ 9891.079275] [1:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Entered MHI state
5, Pending M0 0 Pending M3 0
<6>[ 9891.079322] [1:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Waiting for M0 M1
or M3. Currently 5...
<6>[ 9891.079367] [1:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Wait complete sta

te: 5
<6>[ 9891.079411] [1:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[ 9891.079451] [1:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[ 9891.079492] [1:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Setting M0 ...
<6>[ 9891.079725] [1:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Exited...
<6>[ 9891.079766] [1:MHI_STATE_THREA: 4605] [process_WAKE_transition] Exited.
<6>[ 9891.083038] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 5 link 1, ring type 2, index 0 db 0x5fa26130
<6>[ 9891.083096] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9891.083375] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9891.083425] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9891.083473] [1:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9891.086677] [2:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 a1 17 51 00 0e 00 14 06 00
<6>[ 9891.088872] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9891.089017] [3:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 6f 19 4f 00 00 00
<6>[ 9891.102667] [2: irq/15-SSP_Int: 1775] [SSP] [M] AR-0,192,6192,5328,180,20
,0,0
<6>[ 9891.103643] [2:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 6f 19 4f 00 15 00 02 04 00
<6>[ 9891.313017] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9891.313318] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[ 9891.313370] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[ 9891.313431] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9891.313665] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[ 9891.326109] [1: kworker/u16:6:32449] vfsspi_work_func_debug ldo: 3, slee
p: 0, irq: 0, tz: 1, type: viper
<6>[ 9891.326169] [1: kworker/u16:6:32449] [SSP] debug_work_func: (61) - Senso
r state: 0x1fc3febf, RC: 1, CC: 0 DC: 0 TC: 0
<6>[ 9891.326219] [1: kworker/u16:6:32449] [SSP] 0 : 184, 6228, 5178 (200ms, 0
ms)
<6>[ 9891.326264] [1: kworker/u16:6:32449] [SSP] 9 : 40, 31, 31, 90, 245, 3 (2
00ms)
<6>[ 9891.326304] [1: kworker/u16:6:32449] [SSP] 13 : 1(1ms)
<6>[ 9892.281319] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26180
<6>[ 9892.281399] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9892.281671] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9892.281723] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9892.281768] [1:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work was
cancelled
<6>[ 9892.285426] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9892.285689] [2:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 a2 17 51 00 0e 00 14 06 00
<6>[ 9892.286500] [2:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 a3 17 51 00 0e 00 14 06 00
<6>[ 9892.287654] [3:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 70 19 4f 00 00 00
<6>[ 9892.293638] [2:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21

00 80 03 01 02 70 19 4f 00 15 00 02 04 00
<6>[ 9892.296020] [3:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 71 19 4f 00 00 00
<6>[ 9892.301892] [2:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 71 19 4f 00 15 00 02 04 00
<6>[ 9892.511165] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9892.511423] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[ 9892.511479] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[ 9892.511537] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9892.511770] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[ 9893.512820] [2: kworker/u16:6:32449] [mhi_initiate_m3] Entered MHI state
4, Pending M0 0 Pending M3 0
<6>[ 9893.512865] [2: kworker/u16:6:32449] [mhi_initiate_m3] Triggering wake o
ut of M2
<6>[ 9893.514770] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26200
<6>[ 9893.514808] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9893.514989] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9893.515015] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9893.515037] [1:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9893.515728] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9893.515849] [3: kworker/u16:6:32449] [mhi_initiate_m3] Cancelled M1 time
r, timer was active
<6>[ 9893.515902] [3: kworker/u16:6:32449] [mhi_initiate_m3] Waiting for M3 co
mpletion.
<6>[ 9893.524909] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9893.525098] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 5
<6>[ 9893.525122] [1:MHI_STATE_THREA: 4605] [process_M3_transition] Processing
M3 state transition
<6>[ 9893.525171] [3: kworker/u16:6:32449] [mhi_initiate_m3] M3 completion rec
eived
<6>[ 9893.525205] [3: kworker/u16:6:32449] [mhi_turn_off_pcie_link] Entered...
<6>[ 9893.539563] [3: kworker/u16:6:32449] mhi 0000:01:00.0: [debug] pmcsr reg
: b dev->current_state : 0
<6>[ 9893.539749] [3: kworker/u16:6:32449] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9893.539851] [3: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: ack mes
sage is ok
<6>[ 9893.539883] [3: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: receive
d Enter_L23_READY DLLP packet
<6>[ 9893.539923] [3: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[ 9893.540073] [3: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[ 9893.570071] [3: kworker/u16:6:32449] [mhi_turn_off_pcie_link] Exited...
<6>[ 9894.297566] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [P] tID:0 tc:1 tm
:0
<6>[ 9894.362659] [0: thread_hotplug:14070] frequency info : 800000, prev_cmd 0
, exe_cmd 4
<6>[ 9894.362693] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,

dm_hotplug disable = 0
<6>[ 9894.362713] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9894.375770] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [R] tID:0 mc: 6 t
c:0 Ver[005683000]
<6>[ 9894.462532] [0: thread_hotplug:14070] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[ 9894.462554] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9894.462565] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9894.841413] I[0:
swapper/0:
0] exynos-pcie 10ee0000.pcie0: cp2ap_w
ake irq involked
<6>[ 9894.841471] [0:
kworker/0:1:25228] exynos-pcie 10ee0000.pcie0: PCIe: W
ake work for RC0
<6>[ 9894.841491] [0:
kworker/0:1:25228] exynos-pcie 10ee0000.pcie0: Callbac
k for the event : 4
<6>[ 9894.841505] [0:
kworker/0:1:25228] [mhi_link_state_cb] Received MSM_PC
IE_EVENT_WAKE
<6>[ 9894.841624] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 10
<6>[ 9894.841640] [1:MHI_STATE_THREA: 4605] [process_WAKE_transition] Entered
<6>[ 9894.841655] [1:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[ 9894.841672] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, start of poweron, pcie state: 0
<6>[ 9894.879897] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: D state
: 0, c54c00
<6>[ 9894.897420] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_reset: Link up : 0x036e2b11
<6>[ 9894.897816] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, end of poweron, pcie state: 3
<6>[ 9894.909612] [1:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] pmcsr reg
: 8 dev->current_state : 3
<6>[ 9894.909942] [1:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9894.909988] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
y for the link of RC0
<6>[ 9894.910026] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
config space of RC0 and its EP
<6>[ 9894.910059] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
RC0
<6>[ 9894.910130] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
EP of RC0
<6>[ 9894.910583] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Refresh
ing the saved config space in PCI framework for RC0 and its EP
<6>[ 9894.916115] [1:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[ 9894.916185] [1:MHI_STATE_THREA: 4605] [process_WAKE_transition] MHI is in
itialized, transitioning to M0.
<6>[ 9894.916222] [1:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Entered MHI state
5, Pending M0 0 Pending M3 0
<6>[ 9894.916259] [1:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Waiting for M0 M1
or M3. Currently 5...
<6>[ 9894.916296] [1:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Wait complete sta
te: 5
<6>[ 9894.916330] [1:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[ 9894.916361] [1:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[ 9894.916394] [1:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Setting M0 ...
<6>[ 9894.916617] [1:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Exited...
<6>[ 9894.916649] [1:MHI_STATE_THREA: 4605] [process_WAKE_transition] Exited.
<6>[ 9894.920292] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 5 link 1, ring type 2, index 0 db 0x5fa26220
<6>[ 9894.920359] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re

ceived ring 0x0


<6>[ 9894.920629] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9894.920681] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9894.920725] [1:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9894.924517] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9894.925137] [0:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 a4 17 51 00 0e 00 14 06 00
<6>[ 9894.927112] [1:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 72 19 4f 00 00 00
<6>[ 9894.938922] [3:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 72 19 4f 00 15 00 02 04 00
<6>[ 9895.148184] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9895.148441] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[ 9895.148495] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[ 9895.148555] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9895.148788] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[ 9895.237394] [2: irq/15-SSP_Int: 1775] [SSP] [M] AR-0,351,6120,5606,180,20
,0,0
<6>[ 9896.121811] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26270
<6>[ 9896.121890] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9896.122129] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9896.122182] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9896.122227] [1:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work was
cancelled
<6>[ 9896.126388] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9896.126642] [0:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 a5 17 51 00 0e 00 14 06 00
<6>[ 9896.128632] [1:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 73 19 4f 00 00 00
<6>[ 9896.135202] [0:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 73 19 4f 00 15 00 02 04 00
<6>[ 9896.344451] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9896.344731] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[ 9896.344786] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[ 9896.344846] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9896.345081] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[ 9896.549440] [0: kworker/0:3H:27247] HOME key is pressed
<6>[ 9896.564933] [0:
kworker/0:1:25228] [Time-to-FULL] 368634(secs), 6143(m
ins)
<6>[ 9896.565240] [0:
kworker/0:1:25228] [Time-to-EMPTY] 36478(secs), 607(mi
ns)
<6>[ 9896.607669] [0:
kworker/0:1:25228] [FG] 0080h,ffa5h,7f80h,ff01h,1900h,
0f7bh,5b6eh,53b1h,1a00h,cef4h,fcc2h,fb43h,00afh,553dh,5d30h,0fd2h,10b4h,1955h,33
80h,5c00h,06bah,0148h,19a1h,5c1ch,1439h,cde1h,2c0fh,da96h,41a5h,0314h,0320h,0f24
h,ffffh,20b0h,2000h,127ch,1400h,2305h,19a0h,8080h,2472h,cea4h,203bh,09d0h,e3e1h,

290eh,0400h,0000h,6035h,392fh,1603h,0241h,0000h,10eeh,ebc8h,05e0h,0050h,1a45h,7d
54h,fb3dh,1680h,1008h,5065h,e000h,0000h,a900h,1005h,0000h,cda9h,0a8bh,7210h,fffb
h,5df9h,2271h,0fd2h,0000h,d90dh,d77fh,4303h,0000h,0000h,0000h,7f80h,0000h,0000h,
0005h,011ah,05e4h,0000h,006bh,090ch,0050h,07cdh,0204h,094dh,0000h,039eh,100fh,0c
0eh,0c0dh,0c0ch,0c0bh,0c0ah,0c09h,0c08h,a516h,4350h,0010h,0058h,ffffh,5d4fh,0f7a
h,1222h,ffbfh,5065h,7fffh,0001h,e700h,ffbfh,0016h,4c50h,fffch,4170h,0000h,4000h,
0000h,7d00h,0620h,0000h,0000h,0000h,0000h,2308h,0000h,0040h,efddh,4040h,56cch,fe
dah,d2dah,004bh,2910h,cef4h,5542h,
<7>[ 9896.609776] [0:
kworker/0:1:25228] max77843_fg_write_temp: temperature
to (262, 0x1a33)
<6>[ 9896.610590] [0:
kworker/0:1:25228] max77843_fg_check_qrtable: QRTABLE2
0_REG(0x1603), QRTABLE30_REG(0x1005)
<6>[ 9896.614189] [0:
kworker/0:1:25228] max77843_fg_read_vcell: VCELL(4139)
, data(0xcef4)
<7>[ 9896.614568] [0:
kworker/0:1:25228] max77843_get_fuelgauge_soc: soc(914
), low_batt_alarm(0)
<6>[ 9896.614622] [0:
kworker/0:1:25228] sec_bat_get_property cable type = 1
sleep_mode = 0
<7>[ 9896.614926] [0:
kworker/0:1:25228] max77843_chg_get_property : set-cur
rent(0mA), current now(433mA)
<6>[ 9896.615227] [0:
kworker/0:1:25228] max77843_fg_get_scaled_capacity : C
ABLE TYPE(1) INPUT CURRENT(433) CHARGINGE MODE(NONE)
<7>[ 9896.615271] [0:
kworker/0:1:25228] max77843_fg_get_scaled_capacity: ca
pacity_max (926)
<6>[ 9896.615582] [0:
kworker/0:1:25228] max77843_fg_get_scaled_capacity: sc
aled capacity (98.7)
<6>[ 9896.615625] [0:
kworker/0:1:25228] max77843_fg_get_atomic_capacity : N
OW(98), OLD(98)
<6>[ 9896.615697] [0:
kworker/0:1:25228] sec-battery battery.51: sec_bat_get
_battery_info:Vnow(4139mV),Inow(-129mA),Isysnow(-1mA),Imax(460mA),SOC(98%),Tbat(
262),Tchg(272),Twpc(0),is_hc_usb(0)
<6>[ 9896.615752] [0:
kworker/0:1:25228] sec-battery battery.51: Connected,V
avg(4117mV),Vocv(4217mV),Tamb(262),Iavg(-189mA),Isysavg(-1mA),Iadc(0)
<6>[ 9896.616802] [0:
kworker/0:1:25228] sdchg_ic_use_adc_check : SELF_DISCH
ARGING(0) SELF_DISCHARGING_ADC(0)
<6>[ 9896.616862] [0:
kworker/0:1:25228] sec-battery battery.51: sdchg_ic_us
e_discharging_check: Auto_DIS(0), Force_DIS(0)
<6>[ 9896.617184] [0:
kworker/0:1:25228] max77843_get_float_voltage: battery
cv voltage 0x1d, chg_float_voltage = 4350mV
<6>[ 9896.617232] [0:
kworker/0:1:25228] sec_bat_swelling_check: status(2),
swell_mode(0:1), cv(0x1d), temp(262)
<6>[ 9896.617273] [0:
kworker/0:1:25228] sec_bat_swelling_check: DISCHARGING
or NOT-CHARGING. stop swelling mode
<6>[ 9896.617335] [0:
kworker/0:1:25228] sec-battery battery.51: sec_bat_mon
itor_work: Status(Discharging), mode(None), Health(Good), Cable(1), level(70%),
HV(NONE), Cycle(599)
<6>[ 9896.617385] [0:
kworker/0:1:25228] power_supply battery: power_supply_
changed
<6>[ 9896.617598] [0:
kworker/0:1:25228] sec_bat_get_property cable type = 1
sleep_mode = 0
<6>[ 9896.617666] [0:
kworker/0:1:25228] sec_bat_get_property cable type = 1
<6>[ 9896.628042]
sleep_mode = 0
<12>[ 9896.630341]
2 h=2 st=3 c=0 o=1
<12>[ 9896.630485]
2 h=2 st=3 c=0 o=1
sec=0 chg=
<14>[ 9896.630563]

[1:

healthd: 3346] sec_bat_get_property cable type = 1

[1:
healthd: 3346] healthd: battery l=98 v=4139 t=26.
ca=-189 ct=0 ps=0 chg= 2016-11-17 16:17:32.798305644 UTC
[1:
healthd: 3346] healthd: battery l=98 v=4139 t=26.
ca=-189 ct=0 ps=0 chg= 2016-11-17 16:17:32.798305644 UTC hv=0
[1:

healthd: 3346] healthd-android: healthd_mode_andr

oid_battery_update
<14>[ 9896.630636] [1:
healthd: 3346] BatteryPropertiesRegistrar: notify
Listeners : start
<14>[ 9896.630708] [1:
healthd: 3346] IBatteryPropertiesListener : batte
ryPropertiesChanged!
<14>[ 9896.630708] [1:
healthd: 3346] : BatteryPropertiesRegistrar: noti
fyListeners : done
<6>[ 9896.769370] [0: thread_hotplug:14070] frequency info : 400000, prev_cmd 0
, exe_cmd 4
<6>[ 9896.769426] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9896.769463] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9896.938182] [7:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 74 19 43 00 00 00
<6>[ 9896.939907] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa262c0
<6>[ 9896.939935] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9896.939976] [7:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9896.939990] [7:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9896.940004] [7:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work was
cancelled
<6>[ 9896.940571] [7:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9896.951501] [2:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 9f
00 80 03 01 02 74 19 43 00 93 00 02 04 00
<6>[ 9896.969255] [0: thread_hotplug:14070] frequency info : 1000000, prev_cmd
0, exe_cmd 4
<6>[ 9896.969280] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9896.969295] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9897.049307] [2: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9897.049353] [7:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[ 9897.049367] [7:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[ 9897.049380] [7:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9897.049569] [7:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[ 9897.205862] [2: irq/15-SSP_Int: 1775] [SSP] [M] PD: BaroDisabled
<6>[ 9897.469182] [0: thread_hotplug:14070] frequency info : 1000000, prev_cmd
0, exe_cmd 4
<6>[ 9897.469206] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9897.469221] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9898.053028] [1: kworker/u16:9:32452] [mhi_initiate_m3] Entered MHI state
4, Pending M0 0 Pending M3 0
<6>[ 9898.053105] [1: kworker/u16:9:32452] [mhi_initiate_m3] Triggering wake o
ut of M2
<6>[ 9898.063857] [0: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26300
<6>[ 9898.063935] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9898.064173] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9898.064227] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9898.064272] [2:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started

<6>[ 9898.068869] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Exited


<6>[ 9898.068914] [1: kworker/u16:9:32452] [mhi_initiate_m3] Cancelled M1 time
r, timer was active
<6>[ 9898.069254] [1: kworker/u16:9:32452] [mhi_initiate_m3] Waiting for M3 co
mpletion.
<6>[ 9898.080330] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9898.080591] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 5
<6>[ 9898.080647] [2:MHI_STATE_THREA: 4605] [process_M3_transition] Processing
M3 state transition
<6>[ 9898.080743] [2: kworker/u16:9:32452] [mhi_initiate_m3] M3 completion rec
eived
<6>[ 9898.080807] [2: kworker/u16:9:32452] [mhi_turn_off_pcie_link] Entered...
<6>[ 9898.092740] [2: kworker/u16:9:32452] mhi 0000:01:00.0: [debug] pmcsr reg
: b dev->current_state : 0
<6>[ 9898.092910] [2: kworker/u16:9:32452] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9898.093016] [2: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: ack mes
sage is ok
<6>[ 9898.093061] [2: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: receive
d Enter_L23_READY DLLP packet
<6>[ 9898.093113] [2: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[ 9898.093266] [2: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[ 9898.123280] [2: kworker/u16:9:32452] [mhi_turn_off_pcie_link] Exited...
<6>[ 9899.177858] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [P] tID:0 tc:1 tm
:0
<6>[ 9899.182242] [2: irq/15-SSP_Int: 1775] [SSP] [M] AR-0,300,6422,5196,180,20
,0,0
<6>[ 9899.224565] [0:irq/7-sec-pmic-: 794] s2m-rtc s2m-rtc: s2m_rtc_alarm_irq:
irq(550)
<6>[ 9899.225167] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [R] tID:0 mc: 3 t
c:0 Ver[005683000]
<6>[ 9899.226464] [0:
kworker/0:1:25228] s2m_rtc_update: RTC_UPDATE_REGISTER
check : 0x00
<6>[ 9899.227028] [0:
kworker/0:1:25228] s2m-rtc s2m-rtc: s2m_rtc_read_time:
2016-11-17 16:17:35(0x10)PM
<6>[ 9899.229786] [7: kworker/u16:9:32452] [VIB] haptic_work
<6>[ 9899.231137] [6: kworker/u16:9:32452] [VIB] haptic_work
<6>[ 9899.231154] [6: kworker/u16:9:32452] [VIB] max77843_haptic_i2c 1
<6>[ 9899.234315] [6: kworker/u16:9:32452] regulator_enable returns 0
<6>[ 9899.238162] [6: kworker/u16:9:32452] [VIB] haptic_work
<6>[ 9899.238637] [3: kworker/u16:9:32452] [VIB] max77843_haptic_i2c 0
<6>[ 9899.272634] [0: thread_hotplug:14070] frequency info : 800000, prev_cmd 0
, exe_cmd 4
<6>[ 9899.272666] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9899.272685] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9899.372545] [0: thread_hotplug:14070] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[ 9899.372569] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9899.372581] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9899.961527] I[0:
cat:16603] exynos-pcie 10ee0000.pcie0: cp2ap_w
ake irq involked
<6>[ 9899.961648] [0:
kworker/0:1:25228] exynos-pcie 10ee0000.pcie0: PCIe: W
ake work for RC0
<6>[ 9899.961680] [0:
kworker/0:1:25228] exynos-pcie 10ee0000.pcie0: Callbac

k for the event : 4


<6>[ 9899.961700] [0:
kworker/0:1:25228] [mhi_link_state_cb] Received MSM_PC
IE_EVENT_WAKE
<6>[ 9899.961947] [3:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 10
<6>[ 9899.961976] [3:MHI_STATE_THREA: 4605] [process_WAKE_transition] Entered
<6>[ 9899.961998] [3:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[ 9899.962023] [3:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, start of poweron, pcie state: 0
<6>[ 9899.999794] [3:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: D state
: 0, 59300
<6>[ 9900.017216] [0:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_reset: Link up : 0x03e0f111
<6>[ 9900.017610] [0:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, end of poweron, pcie state: 3
<6>[ 9900.029630] [1:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] pmcsr reg
: 8 dev->current_state : 3
<6>[ 9900.029794] [1:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9900.029816] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
y for the link of RC0
<6>[ 9900.029833] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
config space of RC0 and its EP
<6>[ 9900.029849] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
RC0
<6>[ 9900.029894] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
EP of RC0
<6>[ 9900.030252] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Refresh
ing the saved config space in PCI framework for RC0 and its EP
<6>[ 9900.036252] [1:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[ 9900.036289] [1:MHI_STATE_THREA: 4605] [process_WAKE_transition] MHI is in
itialized, transitioning to M0.
<6>[ 9900.036307] [1:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Entered MHI state
5, Pending M0 0 Pending M3 0
<6>[ 9900.036324] [1:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Waiting for M0 M1
or M3. Currently 5...
<6>[ 9900.036341] [1:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Wait complete sta
te: 5
<6>[ 9900.036357] [1:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[ 9900.036371] [1:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[ 9900.036387] [1:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Setting M0 ...
<6>[ 9900.036585] [1:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Exited...
<6>[ 9900.036599] [1:MHI_STATE_THREA: 4605] [process_WAKE_transition] Exited.
<6>[ 9900.039855] [0: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 5 link 1, ring type 2, index 0 db 0x5fa26320
<6>[ 9900.039889] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9900.040044] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9900.040063] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9900.040080] [1:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9900.040721] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9900.044375] [1:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 a6 17 51 00 0e 00 14 06 00
<6>[ 9900.046662] [1:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 75 19 4f 00 00 00
<6>[ 9900.058247] [1:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 75 19 4f 00 15 00 02 04 00
<6>[ 9900.088458] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [P] tID:0 tc:1 tm

:0
<6>[ 9900.173102] [0: thread_hotplug:14070] frequency info : 800000, prev_cmd 0
, exe_cmd 4
<6>[ 9900.173133] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9900.173152] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9900.267336] [1: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9900.267534] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[ 9900.267563] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[ 9900.267582] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9900.267776] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[ 9900.272589] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [R] tID:0 mc: 15
tc:0 Ver[005683000]
<6>[ 9900.272604] [0: thread_hotplug:14070] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[ 9900.272619] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9900.272630] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9900.372552] [0: thread_hotplug:14070] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[ 9900.372572] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9900.372584] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9900.872531] [0: thread_hotplug:14070] frequency info : 1000000, prev_cmd
0, exe_cmd 4
<6>[ 9900.872559] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9900.872574] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9901.269389] [4: kworker/u16:9:32452] [mhi_initiate_m3] Entered MHI state
4, Pending M0 0 Pending M3 0
<6>[ 9901.269413] [4: kworker/u16:9:32452] [mhi_initiate_m3] Triggering wake o
ut of M2
<6>[ 9901.279869] [5: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26370
<6>[ 9901.279897] [5: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9901.280121] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9901.280151] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9901.280170] [2:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9901.280755] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9901.280773] [4: kworker/u16:9:32452] [mhi_initiate_m3] Cancelled M1 time
r, timer was active
<6>[ 9901.280964] [4: kworker/u16:9:32452] [mhi_initiate_m3] Waiting for M3 co
mpletion.
<6>[ 9901.290252] [5: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9901.290293] [4:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 5
<6>[ 9901.290311] [4:MHI_STATE_THREA: 4605] [process_M3_transition] Processing
M3 state transition
<6>[ 9901.290342] [5: kworker/u16:9:32452] [mhi_initiate_m3] M3 completion rec
eived
<6>[ 9901.290367] [5: kworker/u16:9:32452] [mhi_turn_off_pcie_link] Entered...

<6>[ 9901.302629] [5: kworker/u16:9:32452] mhi 0000:01:00.0: [debug] pmcsr reg


: b dev->current_state : 0
<6>[ 9901.302749] [5: kworker/u16:9:32452] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9901.302820] [5: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: ack mes
sage is ok
<6>[ 9901.302835] [5: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: receive
d Enter_L23_READY DLLP packet
<6>[ 9901.302856] [5: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[ 9901.302944] [5: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[ 9901.333475] [7: kworker/u16:9:32452] [mhi_turn_off_pcie_link] Exited...
<6>[ 9902.313549] [2: kworker/u16:6:32449] vfsspi_work_func_debug ldo: 3, slee
p: 0, irq: 0, tz: 1, type: viper
<6>[ 9902.340077] [3: kworker/u16:6:32449] [SSP] debug_work_func: (61) - Senso
r state: 0x1fc3febf, RC: 1, CC: 0 DC: 0 TC: 0
<6>[ 9902.340146] [3: kworker/u16:6:32449] [SSP] 0 : 391, 6372, 5383 (200ms, 0
ms)
<6>[ 9902.340193] [3: kworker/u16:6:32449] [SSP] 9 : 45, 37, 38, 106, 245, 3 (
200ms)
<6>[ 9902.340234] [3: kworker/u16:6:32449] [SSP] 13 : 1(1ms)
<6>[ 9902.522212] I[0:
swapper/0:
0] exynos-pcie 10ee0000.pcie0: cp2ap_w
ake irq involked
<6>[ 9902.522408] [0:
kworker/0:0:13589] exynos-pcie 10ee0000.pcie0: PCIe: W
ake work for RC0
<6>[ 9902.522527] [0:
kworker/0:0:13589] exynos-pcie 10ee0000.pcie0: Callbac
k for the event : 4
<6>[ 9902.522570] [0:
kworker/0:0:13589] [mhi_link_state_cb] Received MSM_PC
IE_EVENT_WAKE
<6>[ 9902.522725] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 10
<6>[ 9902.522770] [0:MHI_STATE_THREA: 4605] [process_WAKE_transition] Entered
<6>[ 9902.522814] [0:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[ 9902.522865] [0:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, start of poweron, pcie state: 0
<6>[ 9902.563338] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: D state
: 0, 9d1600
<6>[ 9902.582218] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_reset: Link up : 0x03a8cf11
<6>[ 9902.582802] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, end of poweron, pcie state: 3
<6>[ 9902.596476] [3:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] pmcsr reg
: 8 dev->current_state : 3
<6>[ 9902.596812] [3:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9902.596869] [3:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
y for the link of RC0
<6>[ 9902.596915] [3:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
config space of RC0 and its EP
<6>[ 9902.596958] [3:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
RC0
<6>[ 9902.597048] [3:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
EP of RC0
<6>[ 9902.597510] [3:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Refresh
ing the saved config space in PCI framework for RC0 and its EP
<6>[ 9902.603065] [3:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[ 9902.603125] [3:MHI_STATE_THREA: 4605] [process_WAKE_transition] MHI is in
itialized, transitioning to M0.
<6>[ 9902.603175] [3:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Entered MHI state

5, Pending M0 0 Pending M3 0
<6>[ 9902.603221] [3:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Waiting for M0 M1
or M3. Currently 5...
<6>[ 9902.603267] [3:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Wait complete sta
te: 5
<6>[ 9902.603310] [3:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[ 9902.603350] [3:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[ 9902.603393] [3:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Setting M0 ...
<6>[ 9902.603626] [3:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Exited...
<6>[ 9902.603668] [3:MHI_STATE_THREA: 4605] [process_WAKE_transition] Exited.
<6>[ 9902.605399] [2: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 5 link 1, ring type 2, index 0 db 0x5fa26390
<6>[ 9902.605459] [2: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9902.605704] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9902.605756] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9902.605870] [0:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9902.609676] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9902.610070] [1:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 a7 17 51 00 0e 00 14 06 00
<6>[ 9902.612048] [3:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 76 19 4f 00 00 00
<6>[ 9902.624674] [1:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 76 19 4f 00 15 00 02 04 00
<6>[ 9902.833903] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9902.834163] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[ 9902.834216] [0:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[ 9902.834274] [0:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9902.834512] [0:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[ 9902.876410] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [P] tID:0 tc:1 tm
:0
<6>[ 9902.879445] [0: thread_hotplug:14070] frequency info : 400000, prev_cmd 0
, exe_cmd 4
<6>[ 9902.879508] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9902.879545] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9902.944825] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [R] tID:0 mc: 5 t
c:0 Ver[005683000]
<6>[ 9902.960108] [5:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 77 19 43 00 00 00
<6>[ 9902.961868] [5: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa263e0
<6>[ 9902.961888] [5: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9902.961926] [6:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9902.961945] [6:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9902.961960] [6:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work was
cancelled
<6>[ 9902.962583] [6:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9902.973412] [4:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 a9
00 80 03 01 02 77 19 43 00 9d 00 02 04 00
<6>[ 9902.979231] [0: thread_hotplug:14070] frequency info : 800000, prev_cmd 0

, exe_cmd 4
<6>[ 9902.979258] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9902.979278] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9903.071382] [5: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9903.071426] [4:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[ 9903.071438] [4:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[ 9903.071450] [4:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9903.071640] [4:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[ 9903.079250] [0: thread_hotplug:14070] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[ 9903.079270] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9903.079282] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9903.131611] [2: irq/15-SSP_Int: 1775] [SSP] [M] AR-0,375,6468,5213,180,20
,0,0
<6>[ 9903.479241] [0: thread_hotplug:14070] frequency info : 1000000, prev_cmd
0, exe_cmd 4
<6>[ 9903.479265] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9903.479280] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9903.685660] [7:
argosd: 3378] argos_pm_qos_notify: name:UFS, spee
d:297Mbps, prev level:-1, request level:0
<6>[ 9903.689587] [5:
argosd: 3378] argos_freq_lock name:UFS, CPU_MIN=0
, CPU_MAX=0, KFC_MIN=1300000, KFC_MAX=0, MIF=1264000, INT=400000
<6>[ 9903.779185] [0: thread_hotplug:14070] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[ 9903.779206] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9903.779218] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9903.879189] [0: thread_hotplug:14070] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[ 9903.879211] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9903.879223] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9904.072499] [5: kworker/u16:6:32449] [mhi_initiate_m3] Entered MHI state
4, Pending M0 0 Pending M3 0
<6>[ 9904.072515] [5: kworker/u16:6:32449] [mhi_initiate_m3] Triggering wake o
ut of M2
<6>[ 9904.082946] [5: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26420
<6>[ 9904.082961] [5: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9904.082981] [4:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9904.082993] [4:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9904.083002] [4:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9904.083315] [4:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9904.083320] [5: kworker/u16:6:32449] [mhi_initiate_m3] Cancelled M1 time
r, timer was active
<6>[ 9904.083491] [5: kworker/u16:6:32449] [mhi_initiate_m3] Waiting for M3 co
mpletion.
<6>[ 9904.093470] [5: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0

<6>[ 9904.093492] [4:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni


ng to 5
<6>[ 9904.093504] [4:MHI_STATE_THREA: 4605] [process_M3_transition] Processing
M3 state transition
<6>[ 9904.093521] [5: kworker/u16:6:32449] [mhi_initiate_m3] M3 completion rec
eived
<6>[ 9904.093534] [5: kworker/u16:6:32449] [mhi_turn_off_pcie_link] Entered...
<6>[ 9904.105924] [5: kworker/u16:6:32449] mhi 0000:01:00.0: [debug] pmcsr reg
: b dev->current_state : 0
<6>[ 9904.106005] [5: kworker/u16:6:32449] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9904.106062] [5: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: ack mes
sage is ok
<6>[ 9904.106071] [5: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: receive
d Enter_L23_READY DLLP packet
<6>[ 9904.106082] [5: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[ 9904.106142] [5: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[ 9904.136127] [5: kworker/u16:6:32449] [mhi_turn_off_pcie_link] Exited...
<6>[ 9905.081398] I[0:oid.app.myfiles:16621] exynos-pcie 10ee0000.pcie0: cp2ap_w
ake irq involked
<6>[ 9905.081549] [0:
kworker/0:1:25228] exynos-pcie 10ee0000.pcie0: PCIe: W
ake work for RC0
<6>[ 9905.081571] [0:
kworker/0:1:25228] exynos-pcie 10ee0000.pcie0: Callbac
k for the event : 4
<6>[ 9905.081584] [0:
kworker/0:1:25228] [mhi_link_state_cb] Received MSM_PC
IE_EVENT_WAKE
<6>[ 9905.081636] [3:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 10
<6>[ 9905.081654] [3:MHI_STATE_THREA: 4605] [process_WAKE_transition] Entered
<6>[ 9905.081668] [3:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[ 9905.081686] [3:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, start of poweron, pcie state: 0
<6>[ 9905.119539] [3:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: D state
: 0, 881300
<6>[ 9905.137270] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_reset: Link up : 0x03843811
<6>[ 9905.137517] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, end of poweron, pcie state: 3
<6>[ 9905.149450] [2:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] pmcsr reg
: 8 dev->current_state : 3
<6>[ 9905.149622] [2:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9905.149640] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
y for the link of RC0
<6>[ 9905.149654] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
config space of RC0 and its EP
<6>[ 9905.149667] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
RC0
<6>[ 9905.149699] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
EP of RC0
<6>[ 9905.150070] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Refresh
ing the saved config space in PCI framework for RC0 and its EP
<6>[ 9905.155167] [2:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[ 9905.155192] [2:MHI_STATE_THREA: 4605] [process_WAKE_transition] MHI is in
itialized, transitioning to M0.
<6>[ 9905.155207] [2:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Entered MHI state
5, Pending M0 0 Pending M3 0
<6>[ 9905.155222] [2:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Waiting for M0 M1

or M3. Currently 5...


<6>[ 9905.155236] [2:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Wait complete sta
te: 5
<6>[ 9905.155250] [2:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[ 9905.155263] [2:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[ 9905.155276] [2:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Setting M0 ...
<6>[ 9905.155326] [2:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Exited...
<6>[ 9905.155339] [2:MHI_STATE_THREA: 4605] [process_WAKE_transition] Exited.
<6>[ 9905.158148] [0: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 5 link 1, ring type 2, index 0 db 0x5fa26440
<6>[ 9905.158170] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9905.158261] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9905.158277] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9905.158291] [2:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9905.158786] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9905.162357] [2:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 a8 17 51 00 0e 00 14 06 00
<6>[ 9905.163604] [2:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 78 19 4f 00 00 00
<6>[ 9905.176516] [0:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 78 19 4f 00 15 00 02 04 00
<6>[ 9905.385486] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9905.385591] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[ 9905.385608] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[ 9905.385628] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9905.385848] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[ 9905.506479] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [P] tID:0 tc:1 tm
:0
<6>[ 9905.587255] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [R] tID:0 mc: 6 t
c:0 Ver[005683000]
<6>[ 9905.595881] [0: thread_hotplug:14070] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[ 9905.595901] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9905.595913] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9905.692288] [0:
argosd: 3378] argos_pm_qos_notify: name:UFS, spee
d:4Mbps, prev level:0, request level:-1
<6>[ 9905.695987] [0: thread_hotplug:14070] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[ 9905.696073] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9905.696087] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9905.696961] [3:
argosd: 3378] argos_freq_unlock name:UFS
<6>[ 9906.366648] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26490
<6>[ 9906.366722] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9906.366984] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9906.367039] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9906.367089] [0:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work was
cancelled

<6>[ 9906.370961] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Exited


<6>[ 9906.371442] [1:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 a9 17 51 00 0e 00 14 06 00
<6>[ 9906.374065] [0:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 79 19 4f 00 00 00
<6>[ 9906.379901] [2:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 79 19 4f 00 15 00 02 04 00
<6>[ 9906.588985] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9906.589158] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[ 9906.589185] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[ 9906.589211] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9906.589413] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<4>[ 9906.645606] I[0:
swapper/0:
0] DHCP - 0x108 [RX]
<6>[ 9907.082989] [2: irq/15-SSP_Int: 1775] [SSP] [M] AR-0,-169,6902,4288,180,2
0,0,0
<6>[ 9907.592696] [3: kworker/u16:6:32449] [mhi_initiate_m3] Entered MHI state
4, Pending M0 0 Pending M3 0
<6>[ 9907.592736] [3: kworker/u16:6:32449] [mhi_initiate_m3] Triggering wake o
ut of M2
<6>[ 9907.603501] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa264e0
<6>[ 9907.603564] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9907.603764] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9907.603808] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9907.603840] [2:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9907.605070] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9907.605105] [0: kworker/u16:6:32449] [mhi_initiate_m3] Cancelled M1 time
r, timer was active
<6>[ 9907.605202] [0: kworker/u16:6:32449] [mhi_initiate_m3] Waiting for M3 co
mpletion.
<6>[ 9907.614219] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9907.614480] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 5
<6>[ 9907.614528] [2:MHI_STATE_THREA: 4605] [process_M3_transition] Processing
M3 state transition
<6>[ 9907.614744] [0: kworker/u16:6:32449] [mhi_initiate_m3] M3 completion rec
eived
<6>[ 9907.614798] [0: kworker/u16:6:32449] [mhi_turn_off_pcie_link] Entered...
<6>[ 9907.626124] [0: kworker/u16:6:32449] mhi 0000:01:00.0: [debug] pmcsr reg
: b dev->current_state : 0
<6>[ 9907.626273] [0: kworker/u16:6:32449] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9907.626356] [0: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: ack mes
sage is ok
<6>[ 9907.626377] [0: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: receive
d Enter_L23_READY DLLP packet
<6>[ 9907.626405] [0: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[ 9907.626519] [0: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[ 9907.655650] [3: kworker/u16:6:32449] [mhi_turn_off_pcie_link] Exited...

<6>[ 9907.750568] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [P] tID:0 tc:1 tm


:0
<6>[ 9907.799241] [0: thread_hotplug:14070] frequency info : 800000, prev_cmd 0
, exe_cmd 4
<6>[ 9907.799274] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9907.799293] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9907.853489] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [R] tID:0 mc: 8 t
c:0 Ver[005683000]
<6>[ 9907.899238] [0: thread_hotplug:14070] frequency info : 1200000, prev_cmd
0, exe_cmd 4
<6>[ 9907.899264] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9907.899277] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9907.944136] [2:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 7a 19 43 00 00 00
<6>[ 9907.944204] [2:
qmuxd: 3399] [mhi_wake_dev_from_m3] Initiating M
0 work...
<6>[ 9907.944307] [2: kworker/u16:6:32449] [m0_work] No pending resume, initia
ting M0.
<6>[ 9907.944328] [2: kworker/u16:6:32449] [mhi_initiate_m0] Entered MHI state
5, Pending M0 0 Pending M3 0
<6>[ 9907.944345] [2: kworker/u16:6:32449] [mhi_initiate_m0] Waiting for M0 M1
or M3. Currently 5...
<6>[ 9907.944361] [2: kworker/u16:6:32449] [mhi_initiate_m0] Wait complete sta
te: 5
<6>[ 9907.944376] [2: kworker/u16:6:32449] [mhi_turn_on_pcie_link] Entered...
<6>[ 9907.944400] [2: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, start of poweron, pcie state: 0
<6>[ 9907.982962] [2: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: D state
: 0, b43400
<6>[ 9908.003205] [2: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: exynos_
pcie_reset: Link up : 0x03f36611
<6>[ 9908.003571] [2: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, end of poweron, pcie state: 3
<6>[ 9908.016228] [3: kworker/u16:6:32449] mhi 0000:01:00.0: [debug] pmcsr reg
: 8 dev->current_state : 3
<6>[ 9908.016397] [3: kworker/u16:6:32449] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9908.016418] [3: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: Recover
y for the link of RC0
<6>[ 9908.016434] [3: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: Recover
config space of RC0 and its EP
<6>[ 9908.016449] [3: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: Recover
RC0
<6>[ 9908.016492] [3: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: Recover
EP of RC0
<6>[ 9908.016862] [3: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: Refresh
ing the saved config space in PCI framework for RC0 and its EP
<6>[ 9908.022334] [3: kworker/u16:6:32449] [mhi_turn_on_pcie_link] Exited...
<6>[ 9908.022368] [3: kworker/u16:6:32449] [mhi_initiate_m0] Setting M0 ...
<6>[ 9908.022540] [3: kworker/u16:6:32449] [mhi_initiate_m0] Exited...
<6>[ 9908.026064] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 5 link 1, ring type 2, index 0 db 0x5fa26500
<6>[ 9908.026096] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9908.026280] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9908.026303] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9908.026321] [1:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT

cancelled, either running or never started


<6>[ 9908.026794] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9908.038052] [1:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 9f
00 80 03 01 02 7a 19 43 00 93 00 02 04 00
<6>[ 9908.248577] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9908.248639] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[ 9908.248658] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[ 9908.248683] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9908.248921] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<4>[ 9908.313550] I[0:
swapper/0:
0] DHCP - 0x108 [RX]
<6>[ 9908.920977] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26540
<6>[ 9908.921054] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9908.921295] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9908.921348] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9908.921392] [1:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work was
cancelled
<6>[ 9908.925467] [2:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 aa 17 51 00 0e 00 14 06 00
<6>[ 9908.926444] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9908.927494] [3:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 7b 19 4f 00 00 00
<6>[ 9908.934940] [2:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 7b 19 4f 00 15 00 02 04 00
<6>[ 9909.082882] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [P] tID:0 tc:1 tm
:0
<6>[ 9909.099225] [0: thread_hotplug:14070] frequency info : 800000, prev_cmd 0
, exe_cmd 4
<6>[ 9909.099258] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9909.099278] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9909.144273] [4: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9909.144398] [5:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[ 9909.144417] [5:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[ 9909.144438] [5:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9909.144632] [5:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[ 9909.154285] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [R] tID:0 mc: 5 t
c:0 Ver[005683000]
<6>[ 9909.299220] [0: thread_hotplug:14070] frequency info : 1200000, prev_cmd
0, exe_cmd 4
<6>[ 9909.299245] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9909.299258] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9910.146289] [1: kworker/u16:6:32449] [mhi_initiate_m3] Entered MHI state
4, Pending M0 0 Pending M3 0
<6>[ 9910.146370] [1: kworker/u16:6:32449] [mhi_initiate_m3] Triggering wake o
ut of M2
<6>[ 9910.157270] [1: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring

DB state 4 link 1, ring type 2, index 0 db 0x5fa26590


<6>[ 9910.157339] [1: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9910.157488] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9910.157537] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9910.157584] [1:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9910.162112] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9910.162246] [2: kworker/u16:6:32449] [mhi_initiate_m3] Cancelled M1 time
r, timer was active
<6>[ 9910.162579] [2: kworker/u16:6:32449] [mhi_initiate_m3] Waiting for M3 co
mpletion.
<6>[ 9910.175743] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9910.176090] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 5
<6>[ 9910.176143] [1:MHI_STATE_THREA: 4605] [process_M3_transition] Processing
M3 state transition
<6>[ 9910.176372] [2: kworker/u16:6:32449] [mhi_initiate_m3] M3 completion rec
eived
<6>[ 9910.176443] [2: kworker/u16:6:32449] [mhi_turn_off_pcie_link] Entered...
<6>[ 9910.189454] [2: kworker/u16:6:32449] mhi 0000:01:00.0: [debug] pmcsr reg
: b dev->current_state : 0
<6>[ 9910.189647] [2: kworker/u16:6:32449] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9910.189762] [2: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: ack mes
sage is ok
<6>[ 9910.189809] [2: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: receive
d Enter_L23_READY DLLP packet
<6>[ 9910.189863] [2: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[ 9910.190036] [2: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[ 9910.201382] I[0:
swapper/0:
0] exynos-pcie 10ee0000.pcie0: cp2ap_w
ake irq involked
<6>[ 9910.201652] [0:
kworker/0:0:13589] exynos-pcie 10ee0000.pcie0: PCIe: W
ake work for RC0
<6>[ 9910.201760] [0:
kworker/0:0:13589] exynos-pcie 10ee0000.pcie0: Callbac
k for the event : 4
<6>[ 9910.201877] [0:
kworker/0:0:13589] [mhi_link_state_cb] Received MSM_PC
IE_EVENT_WAKE
<6>[ 9910.202444] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 10
<6>[ 9910.202617] [1:MHI_STATE_THREA: 4605] [process_WAKE_transition] Entered
<6>[ 9910.220065] [2: kworker/u16:6:32449] [mhi_turn_off_pcie_link] Exited...
<6>[ 9910.220192] [1:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[ 9910.220230] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, start of poweron, pcie state: 0
<6>[ 9910.263168] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: D state
: 0, 4cfb00
<6>[ 9910.283875] [3:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_reset: Link up : 0x0316df11
<6>[ 9910.284306] [3:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, end of poweron, pcie state: 3
<6>[ 9910.296264] [0:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] pmcsr reg
: 8 dev->current_state : 3
<6>[ 9910.296430] [0:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9910.296457] [0:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover

y for the link of RC0


<6>[ 9910.296478] [0:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
config space of RC0 and its EP
<6>[ 9910.296497] [0:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
RC0
<6>[ 9910.296546] [0:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
EP of RC0
<6>[ 9910.296893] [0:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Refresh
ing the saved config space in PCI framework for RC0 and its EP
<6>[ 9910.302612] [0:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[ 9910.302652] [0:MHI_STATE_THREA: 4605] [process_WAKE_transition] MHI is in
itialized, transitioning to M0.
<6>[ 9910.302675] [0:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Entered MHI state
5, Pending M0 0 Pending M3 0
<6>[ 9910.302696] [0:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Waiting for M0 M1
or M3. Currently 5...
<6>[ 9910.302717] [0:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Wait complete sta
te: 5
<6>[ 9910.302737] [0:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[ 9910.302755] [0:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[ 9910.302774] [0:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Setting M0 ...
<6>[ 9910.302976] [0:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Exited...
<6>[ 9910.302995] [0:MHI_STATE_THREA: 4605] [process_WAKE_transition] Exited.
<6>[ 9910.306576] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 5 link 1, ring type 2, index 0 db 0x5fa265b0
<6>[ 9910.306614] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9910.306670] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9910.306695] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9910.306716] [0:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9910.307347] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9910.310881] [0:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 ab 17 51 00 0e 00 14 06 00
<6>[ 9910.312101] [0:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 7c 19 4f 00 00 00
<6>[ 9910.324449] [1:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 7c 19 4f 00 15 00 02 04 00
<6>[ 9910.533537] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9910.533718] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[ 9910.533744] [0:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[ 9910.533772] [0:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9910.533976] [0:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[ 9911.033668] [2: irq/15-SSP_Int: 1775] [SSP] [M] AR-0,90,6864,4399,180,20,
0,0
<6>[ 9911.469452] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26600
<6>[ 9911.469530] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9911.469786] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9911.469838] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9911.469883] [0:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work was
cancelled

<6>[ 9911.473989] [1:


qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 ac 17 51 00 0e 00 14 06 00
<6>[ 9911.474321] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9911.476000] [0:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 7d 19 4f 00 00 00
<6>[ 9911.483034] [1:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 7d 19 4f 00 15 00 02 04 00
<6>[ 9911.692356] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9911.692633] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[ 9911.692686] [0:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[ 9911.692748] [0:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9911.692982] [0:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[ 9912.292065] [2: irq/15-SSP_Int: 1775] [SSP] [M] PD: BaroDisabled
<6>[ 9912.696176] [0: kworker/u16:9:32452] [mhi_initiate_m3] Entered MHI state
4, Pending M0 0 Pending M3 0
<6>[ 9912.696260] [0: kworker/u16:9:32452] [mhi_initiate_m3] Triggering wake o
ut of M2
<6>[ 9912.698242] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26650
<6>[ 9912.698303] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9912.698540] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9912.698590] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9912.698636] [0:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9912.707400] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9912.707565] [1: kworker/u16:9:32452] [mhi_initiate_m3] Cancelled M1 time
r, timer was active
<6>[ 9912.707818] [1: kworker/u16:9:32452] [mhi_initiate_m3] Waiting for M3 co
mpletion.
<6>[ 9912.720711] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9912.720952] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 5
<6>[ 9912.721003] [0:MHI_STATE_THREA: 4605] [process_M3_transition] Processing
M3 state transition
<6>[ 9912.721218] [1: kworker/u16:9:32452] [mhi_initiate_m3] M3 completion rec
eived
<6>[ 9912.721290] [1: kworker/u16:9:32452] [mhi_turn_off_pcie_link] Entered...
<6>[ 9912.733818] [1: kworker/u16:9:32452] mhi 0000:01:00.0: [debug] pmcsr reg
: b dev->current_state : 0
<6>[ 9912.734012] [1: kworker/u16:9:32452] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9912.734127] [1: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: ack mes
sage is ok
<6>[ 9912.734174] [1: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: receive
d Enter_L23_READY DLLP packet
<6>[ 9912.734229] [1: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[ 9912.734404] [1: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[ 9912.764418] [1: kworker/u16:9:32452] [mhi_turn_off_pcie_link] Exited...
<6>[ 9913.326136] [1: kworker/u16:9:32452] vfsspi_work_func_debug ldo: 3, slee
p: 0, irq: 0, tz: 1, type: viper

<6>[ 9913.352714] [0: kworker/u16:9:32452] [SSP] debug_work_func: (61) - Senso


r state: 0x1fc3febf, RC: 1, CC: 0 DC: 0 TC: 0
<6>[ 9913.352773] [0: kworker/u16:9:32452] [SSP] 0 : -255, 7067, 4081 (200ms,
0ms)
<6>[ 9913.352820] [0: kworker/u16:9:32452] [SSP] 9 : 56, 45, 50, 138, 245, 3 (
200ms)
<6>[ 9913.352860] [0: kworker/u16:9:32452] [SSP] 13 : 1(1ms)
<6>[ 9914.041155] I[0: cfinteractive0:14066] exynos-pcie 10ee0000.pcie0: cp2ap_w
ake irq involked
<6>[ 9914.041484] [0:
kworker/0:0:13589] exynos-pcie 10ee0000.pcie0: PCIe: W
ake work for RC0
<6>[ 9914.041552] [0:
kworker/0:0:13589] exynos-pcie 10ee0000.pcie0: Callbac
k for the event : 4
<6>[ 9914.041572] [0:
kworker/0:0:13589] [mhi_link_state_cb] Received MSM_PC
IE_EVENT_WAKE
<6>[ 9914.041822] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 10
<6>[ 9914.041849] [2:MHI_STATE_THREA: 4605] [process_WAKE_transition] Entered
<6>[ 9914.041872] [2:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[ 9914.041897] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, start of poweron, pcie state: 0
<6>[ 9914.079755] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: D state
: 0, 712400
<6>[ 9914.097396] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_reset: Link up : 0x03cbef11
<6>[ 9914.097897] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, end of poweron, pcie state: 3
<6>[ 9914.109562] [2:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] pmcsr reg
: 8 dev->current_state : 3
<6>[ 9914.109722] [2:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9914.109750] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
y for the link of RC0
<6>[ 9914.109771] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
config space of RC0 and its EP
<6>[ 9914.109789] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
RC0
<6>[ 9914.109839] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
EP of RC0
<6>[ 9914.110185] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Refresh
ing the saved config space in PCI framework for RC0 and its EP
<6>[ 9914.115654] [2:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[ 9914.115688] [2:MHI_STATE_THREA: 4605] [process_WAKE_transition] MHI is in
itialized, transitioning to M0.
<6>[ 9914.115713] [2:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Entered MHI state
5, Pending M0 0 Pending M3 0
<6>[ 9914.115734] [2:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Waiting for M0 M1
or M3. Currently 5...
<6>[ 9914.115755] [2:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Wait complete sta
te: 5
<6>[ 9914.115775] [2:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[ 9914.115792] [2:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[ 9914.115867] [2:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Setting M0 ...
<6>[ 9914.116071] [2:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Exited...
<6>[ 9914.116090] [2:MHI_STATE_THREA: 4605] [process_WAKE_transition] Exited.
<6>[ 9914.120254] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 5 link 1, ring type 2, index 0 db 0x5fa26670
<6>[ 9914.120292] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9914.120435] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni

ng to 2
<6>[ 9914.120460] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9914.120481] [0:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9914.121044] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9914.124621] [1:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 ad 17 51 00 0e 00 14 06 00
<6>[ 9914.125957] [0:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 7e 19 4f 00 00 00
<6>[ 9914.138902] [1:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 7e 19 4f 00 15 00 02 04 00
<6>[ 9914.348041] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9914.348246] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[ 9914.348271] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[ 9914.348296] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9914.348496] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[ 9914.662135] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [P] tID:0 tc:1 tm
:0
<6>[ 9914.719227] [0: thread_hotplug:14070] frequency info : 800000, prev_cmd 0
, exe_cmd 4
<6>[ 9914.719261] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9914.719280] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9914.822626] [0: thread_hotplug:14070] frequency info : 1200000, prev_cmd
0, exe_cmd 4
<6>[ 9914.822651] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9914.822664] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9915.163735] [2: irq/15-SSP_Int: 1775] [SSP] [M] AR-0,-888,7354,3516,180,2
0,0,0
<6>[ 9915.326137] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa266c0
<6>[ 9915.326167] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9915.326292] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9915.326310] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9915.326326] [2:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work was
cancelled
<6>[ 9915.326972] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9915.330300] [1:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 ae 17 51 00 0e 00 14 06 00
<6>[ 9915.331162] [0:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 7f 19 4f 00 00 00
<6>[ 9915.343692] [3:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 7f 19 4f 00 15 00 02 04 00
<6>[ 9915.494398] [2: kworker/u16:9:32452] [VIB] haptic_work
<6>[ 9915.496974] [2: kworker/u16:9:32452] [VIB] haptic_work
<6>[ 9915.497001] [2: kworker/u16:9:32452] [VIB] max77843_haptic_i2c 1
<6>[ 9915.499120] [0: kworker/u16:9:32452] regulator_enable returns 0
<6>[ 9915.504886] [1: kworker/u16:9:32452] [VIB] haptic_work
<6>[ 9915.505357] [1: kworker/u16:9:32452] [VIB] max77843_haptic_i2c 0
<6>[ 9915.552704] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9915.552853] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni

ng to 3
<6>[ 9915.552873] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[ 9915.552896] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9915.553092] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[ 9915.904925] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [R] tID:0 mc: 76
tc:0 Ver[005683000]
<6>[ 9916.556177] [0: kworker/u16:9:32452] [mhi_initiate_m3] Entered MHI state
4, Pending M0 0 Pending M3 0
<6>[ 9916.556262] [0: kworker/u16:9:32452] [mhi_initiate_m3] Triggering wake o
ut of M2
<6>[ 9916.567197] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26710
<6>[ 9916.567265] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9916.567521] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9916.567574] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9916.567618] [2:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9916.572088] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9916.572239] [0: kworker/u16:9:32452] [mhi_initiate_m3] Cancelled M1 time
r, timer was active
<6>[ 9916.572554] [0: kworker/u16:9:32452] [mhi_initiate_m3] Waiting for M3 co
mpletion.
<6>[ 9916.585731] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9916.585972] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 5
<6>[ 9916.586024] [2:MHI_STATE_THREA: 4605] [process_M3_transition] Processing
M3 state transition
<6>[ 9916.586288] [1: kworker/u16:9:32452] [mhi_initiate_m3] M3 completion rec
eived
<6>[ 9916.586355] [1: kworker/u16:9:32452] [mhi_turn_off_pcie_link] Entered...
<6>[ 9916.599515] [1: kworker/u16:9:32452] mhi 0000:01:00.0: [debug] pmcsr reg
: b dev->current_state : 0
<6>[ 9916.599703] [1: kworker/u16:9:32452] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9916.599817] [1: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: ack mes
sage is ok
<6>[ 9916.599862] [1: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: receive
d Enter_L23_READY DLLP packet
<6>[ 9916.599918] [1: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[ 9916.600089] [1: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[ 9916.630098] [1: kworker/u16:9:32452] [mhi_turn_off_pcie_link] Exited...
<6>[ 9916.799831] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [P] tID:0 tc:1 tm
:0
<6>[ 9916.825990] [0: thread_hotplug:14070] frequency info : 800000, prev_cmd 0
, exe_cmd 4
<6>[ 9916.826021] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9916.826040] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9916.901522] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [R] tID:0 mc: 8 t
c:0 Ver[005683000]
<6>[ 9917.026010] [0: thread_hotplug:14070] frequency info : 1200000, prev_cmd
0, exe_cmd 4

<6>[ 9917.026036] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,


dm_hotplug disable = 0
<6>[ 9917.026049] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9917.957898] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [P] tID:0 tc:1 tm
:0
<6>[ 9918.014573] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [R] tID:0 mc: 3 t
c:0 Ver[005683000]
<6>[ 9918.032580] [0: thread_hotplug:14070] frequency info : 800000, prev_cmd 0
, exe_cmd 4
<6>[ 9918.032612] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9918.032631] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9918.135993] [0: thread_hotplug:14070] frequency info : 1200000, prev_cmd
0, exe_cmd 4
<6>[ 9918.136030] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9918.136045] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9918.728779] [4:
argosd: 3378] argos_pm_qos_notify: name:UFS, spee
d:92Mbps, prev level:-1, request level:0
<6>[ 9918.729937] [5:
argosd: 3378] argos_freq_lock name:UFS, CPU_MIN=0
, CPU_MAX=0, KFC_MIN=1300000, KFC_MAX=0, MIF=1264000, INT=400000
<6>[ 9918.935876] [0: thread_hotplug:14070] frequency info : 1400000, prev_cmd
0, exe_cmd 4
<6>[ 9918.935895] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9918.935906] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9919.113864] [2: irq/15-SSP_Int: 1775] [SSP] [M] AR-0,-589,7239,3818,180,2
0,0,0
<6>[ 9919.161103] I[0:MusicCacheMapUp: 6944] exynos-pcie 10ee0000.pcie0: cp2ap_w
ake irq involked
<6>[ 9919.161152] [0:
kworker/0:1:25228] exynos-pcie 10ee0000.pcie0: PCIe: W
ake work for RC0
<6>[ 9919.161171] [0:
kworker/0:1:25228] exynos-pcie 10ee0000.pcie0: Callbac
k for the event : 4
<6>[ 9919.161185] [0:
kworker/0:1:25228] [mhi_link_state_cb] Received MSM_PC
IE_EVENT_WAKE
<6>[ 9919.161243] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 10
<6>[ 9919.161259] [0:MHI_STATE_THREA: 4605] [process_WAKE_transition] Entered
<6>[ 9919.161273] [0:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[ 9919.161291] [0:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, start of poweron, pcie state: 0
<6>[ 9919.199582] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: D state
: 0, ff5c00
<6>[ 9919.217526] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_reset: Link up : 0x03976a11
<6>[ 9919.217775] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, end of poweron, pcie state: 3
<6>[ 9919.229467] [1:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] pmcsr reg
: 8 dev->current_state : 3
<6>[ 9919.229644] [1:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9919.229663] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
y for the link of RC0
<6>[ 9919.229677] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
config space of RC0 and its EP
<6>[ 9919.229691] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
RC0
<6>[ 9919.229724] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
EP of RC0

<6>[ 9919.230097] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Refresh


ing the saved config space in PCI framework for RC0 and its EP
<6>[ 9919.235320] [1:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[ 9919.235337] [1:MHI_STATE_THREA: 4605] [process_WAKE_transition] MHI is in
itialized, transitioning to M0.
<6>[ 9919.235352] [1:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Entered MHI state
5, Pending M0 0 Pending M3 0
<6>[ 9919.235367] [1:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Waiting for M0 M1
or M3. Currently 5...
<6>[ 9919.235381] [1:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Wait complete sta
te: 5
<6>[ 9919.235395] [1:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[ 9919.235407] [1:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[ 9919.235419] [1:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Setting M0 ...
<6>[ 9919.235479] [1:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Exited...
<6>[ 9919.235491] [1:MHI_STATE_THREA: 4605] [process_WAKE_transition] Exited.
<6>[ 9919.239997] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 5 link 1, ring type 2, index 0 db 0x5fa26730
<6>[ 9919.240019] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9919.240110] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9919.240126] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9919.240140] [1:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9919.240640] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9919.244069] [0:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 af 17 51 00 0e 00 14 06 00
<6>[ 9919.245768] [0:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 80 19 4f 00 00 00
<6>[ 9919.258281] [0:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 80 19 4f 00 15 00 02 04 00
<6>[ 9919.326918] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [P] tID:0 tc:1 tm
:0
<6>[ 9919.335877] [0: thread_hotplug:14070] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[ 9919.335898] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9919.335909] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9919.418529] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [R] tID:0 mc: 6 t
c:0 Ver[005683000]
<6>[ 9919.466994] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9919.467121] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[ 9919.467138] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[ 9919.467158] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9919.467351] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[ 9919.535900] [0: thread_hotplug:14070] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[ 9919.535920] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9919.535931] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9919.678320] [0:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 81 19 43 00 00 00
<6>[ 9919.689105] [7: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26780

<6>[ 9919.689124] [7: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re


ceived ring 0x0
<6>[ 9919.689189] [7:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9919.689202] [7:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9919.689211] [7:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work was
cancelled
<6>[ 9919.689646] [7:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9919.700611] [6:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 8b
00 80 03 01 02 81 19 43 00 7f 00 02 04 00
<6>[ 9919.798170] [7: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9919.798215] [3:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[ 9919.798236] [3:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[ 9919.798256] [3:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9919.798353] [3:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[ 9920.435881] [0: thread_hotplug:14070] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[ 9920.435899] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9920.435911] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9920.450205] [7: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa267c0
<6>[ 9920.450222] [7: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9920.450245] [4:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9920.450257] [4:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9920.450266] [4:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work was
cancelled
<6>[ 9920.450563] [4:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9920.454424] [6:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 b0 17 51 00 0e 00 14 06 00
<6>[ 9920.455224] [7:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 82 19 4f 00 00 00
<6>[ 9920.468309] [4:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 82 19 4f 00 15 00 02 04 00
<6>[ 9920.677159] [5: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9920.677189] [4:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[ 9920.677204] [4:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[ 9920.677217] [4:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9920.677405] [4:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[ 9921.679455] [1: kworker/u16:9:32452] [mhi_initiate_m3] Entered MHI state
4, Pending M0 0 Pending M3 0
<6>[ 9921.679483] [1: kworker/u16:9:32452] [mhi_initiate_m3] Triggering wake o
ut of M2
<6>[ 9921.690196] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26810
<6>[ 9921.690218] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9921.690334] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni

ng to 2
<6>[ 9921.690352] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9921.690367] [0:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9921.690855] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9921.690923] [1: kworker/u16:9:32452] [mhi_initiate_m3] Cancelled M1 time
r, timer was active
<6>[ 9921.691031] [1: kworker/u16:9:32452] [mhi_initiate_m3] Waiting for M3 co
mpletion.
<6>[ 9921.700634] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9921.700737] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 5
<6>[ 9921.700754] [0:MHI_STATE_THREA: 4605] [process_M3_transition] Processing
M3 state transition
<6>[ 9921.700852] [1: kworker/u16:9:32452] [mhi_initiate_m3] M3 completion rec
eived
<6>[ 9921.700874] [1: kworker/u16:9:32452] [mhi_turn_off_pcie_link] Entered...
<6>[ 9921.712672] [1: kworker/u16:9:32452] mhi 0000:01:00.0: [debug] pmcsr reg
: b dev->current_state : 0
<6>[ 9921.712765] [1: kworker/u16:9:32452] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9921.712830] [1: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: ack mes
sage is ok
<6>[ 9921.712845] [1: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: receive
d Enter_L23_READY DLLP packet
<6>[ 9921.712865] [1: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[ 9921.712945] [1: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[ 9921.742919] [1: kworker/u16:9:32452] [mhi_turn_off_pcie_link] Exited...
<6>[ 9923.064794] [2: irq/15-SSP_Int: 1775] [SSP] [M] AR-0,-149,6805,4492,180,2
0,0,0
<6>[ 9923.552506] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [P] tID:0 tc:1 tm
:0
<6>[ 9923.599936] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [R] tID:0 mc: 3 t
c:0 Ver[005683000]
<6>[ 9923.639174] [0: thread_hotplug:14070] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[ 9923.639195] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9923.639207] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9923.736619] [2:
argosd: 3378] argos_pm_qos_notify: name:UFS, spee
d:20Mbps, prev level:0, request level:-1
<6>[ 9923.739237] [0: thread_hotplug:14070] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[ 9923.739290] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9923.739303] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9923.740125] [3:
argosd: 3378] argos_freq_unlock name:UFS
<6>[ 9924.039175] [0: thread_hotplug:14070] frequency info : 1200000, prev_cmd
0, exe_cmd 4
<6>[ 9924.039196] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9924.039208] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9924.139191] [0: thread_hotplug:14070] frequency info : 1000000, prev_cmd
0, exe_cmd 4
<6>[ 9924.139215] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9924.139230] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0

<6>[ 9924.285125] I[0:


swapper/0:
0] exynos-pcie 10ee0000.pcie0: cp2ap_w
ake irq involked
<6>[ 9924.285174] [0:
kworker/0:0:13589] exynos-pcie 10ee0000.pcie0: PCIe: W
ake work for RC0
<6>[ 9924.285199] [0:
kworker/0:0:13589] exynos-pcie 10ee0000.pcie0: Callbac
k for the event : 4
<6>[ 9924.285216] [0:
kworker/0:0:13589] [mhi_link_state_cb] Received MSM_PC
IE_EVENT_WAKE
<6>[ 9924.285277] [4:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 10
<6>[ 9924.285293] [4:MHI_STATE_THREA: 4605] [process_WAKE_transition] Entered
<6>[ 9924.285306] [4:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[ 9924.285319] [4:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, start of poweron, pcie state: 0
<6>[ 9924.322858] [4:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: D state
: 0, dc3f00
<6>[ 9924.339172] [7: kworker/u16:9:32452] [SSP] debug_work_func: (62) - Senso
r state: 0x1fc3febf, RC: 1, CC: 0 DC: 0 TC: 0
<6>[ 9924.339183] [4: kworker/u16:6:32449] vfsspi_work_func_debug ldo: 3, slee
p: 0, irq: 0, tz: 1, type: viper
<6>[ 9924.339199] [7: kworker/u16:9:32452] [SSP] 0 : -141, 6898, 4652 (200ms,
0ms)
<6>[ 9924.339209] [7: kworker/u16:9:32452] [SSP] 9 : 51, 42, 47, 126, 245, 3 (
200ms)
<6>[ 9924.339217] [7: kworker/u16:9:32452] [SSP] 13 : 1(1ms)
<6>[ 9924.342249] [6:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_reset: Link up : 0x03cfed11
<6>[ 9924.342542] [6:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, end of poweron, pcie state: 3
<6>[ 9924.356038] [6:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] pmcsr reg
: 8 dev->current_state : 3
<6>[ 9924.356218] [6:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9924.356230] [6:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
y for the link of RC0
<6>[ 9924.356240] [6:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
config space of RC0 and its EP
<6>[ 9924.356249] [6:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
RC0
<6>[ 9924.356278] [6:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
EP of RC0
<6>[ 9924.356655] [6:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Refresh
ing the saved config space in PCI framework for RC0 and its EP
<6>[ 9924.361766] [6:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[ 9924.361777] [6:MHI_STATE_THREA: 4605] [process_WAKE_transition] MHI is in
itialized, transitioning to M0.
<6>[ 9924.361786] [6:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Entered MHI state
5, Pending M0 0 Pending M3 0
<6>[ 9924.361794] [6:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Waiting for M0 M1
or M3. Currently 5...
<6>[ 9924.361803] [6:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Wait complete sta
te: 5
<6>[ 9924.361810] [6:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[ 9924.361817] [6:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[ 9924.361824] [6:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Setting M0 ...
<6>[ 9924.361917] [6:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Exited...
<6>[ 9924.361924] [6:MHI_STATE_THREA: 4605] [process_WAKE_transition] Exited.
<6>[ 9924.365479] [4: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 5 link 1, ring type 2, index 0 db 0x5fa26830
<6>[ 9924.365494] [4: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re

ceived ring 0x0


<6>[ 9924.365515] [6:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9924.365524] [6:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9924.365532] [6:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9924.366199] [6:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9924.369698] [6:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 b1 17 51 00 0e 00 14 06 00
<6>[ 9924.370492] [7:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 83 19 4f 00 00 00
<6>[ 9924.383597] [0:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 83 19 4f 00 15 00 02 04 00
<6>[ 9924.539192] [0: thread_hotplug:14070] frequency info : 1000000, prev_cmd
0, exe_cmd 4
<6>[ 9924.539218] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9924.539233] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9924.592292] [6: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9924.592322] [7:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[ 9924.592336] [7:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[ 9924.592350] [7:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9924.592600] [7:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[ 9925.361905] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [P] tID:0 tc:1 tm
:0
<6>[ 9925.442559] [0: thread_hotplug:14070] frequency info : 800000, prev_cmd 0
, exe_cmd 4
<6>[ 9925.442592] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9925.442610] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9925.444607] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [R] tID:0 mc: 6 t
c:0 Ver[005683000]
<6>[ 9925.542542] [0: thread_hotplug:14070] frequency info : 1200000, prev_cmd
0, exe_cmd 4
<6>[ 9925.542564] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9925.542577] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9925.551930] [1:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 84 19 43 00 00 00
<6>[ 9925.562214] [1: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26880
<6>[ 9925.562245] [1: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9925.562284] [3:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9925.562302] [3:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9925.562318] [3:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work was
cancelled
<6>[ 9925.563188] [3:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9925.567546] [1:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 b2 17 51 00 0e 00 14 06 00
<6>[ 9925.568240] [4:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 85 19 4f 00 00 00
<6>[ 9925.569388] [5:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 8b
00 80 03 01 02 84 19 43 00 7f 00 02 04 00

<6>[ 9925.571617] [1:


qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 85 19 4f 00 15 00 02 04 00
<6>[ 9925.573660] [1:
Binder_6: 5480] binder: 3995:5480 transaction faile
d 29189, size 116-0
<6>[ 9925.671861] [4: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9925.671901] [3:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[ 9925.671922] [3:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[ 9925.671941] [3:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9925.672135] [3:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[ 9925.741403] [4:
argosd: 3378] argos_pm_qos_notify: name:UFS, spee
d:118Mbps, prev level:-1, request level:0
<6>[ 9925.742521] [0: thread_hotplug:14070] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[ 9925.742539] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9925.742568] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9925.743666] [5:
argosd: 3378] argos_freq_lock name:UFS, CPU_MIN=0
, CPU_MAX=0, KFC_MIN=1300000, KFC_MAX=0, MIF=1264000, INT=400000
<6>[ 9926.142517] [0: thread_hotplug:14070] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[ 9926.142540] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9926.142552] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9926.618403] [0:
kworker/0:1:25228] [Time-to-FULL] 368634(secs), 6143(m
ins)
<6>[ 9926.618594] [0:
kworker/0:1:25228] [Time-to-EMPTY] 15834(secs), 263(mi
ns)
<6>[ 9926.660262] [0:
kworker/0:1:25228] [FG] 0080h,ffa5h,7f80h,ff01h,1900h,
0f74h,5b45h,53b1h,1a33h,c9eah,f77bh,f556h,0127h,551bh,5ccfh,0fcbh,103ch,0affh,33
80h,5c00h,0677h,0148h,19cah,5c1ch,1439h,cc65h,2c0fh,da96h,41a5h,0314h,0320h,0ea5
h,ffffh,20b0h,2000h,127ch,1400h,2305h,19cah,8084h,2472h,cea4h,203bh,09d0h,e3e1h,
290eh,0400h,0000h,7422h,47d5h,1603h,0241h,0000h,10eeh,ebc8h,05e0h,0050h,1a45h,7d
54h,f54dh,1680h,1008h,5111h,e000h,0000h,a900h,1005h,0000h,cda9h,0a8bh,7210h,000c
h,5df9h,2271h,0fc8h,0000h,d90dh,d778h,9b37h,0000h,0000h,0000h,7f80h,0000h,0000h,
0005h,011ah,05e4h,0000h,006bh,090ch,0050h,111dh,0204h,094dh,0000h,039eh,100fh,0c
0eh,0c0dh,0c0ch,0c0bh,0c0ah,0c09h,0c08h,a516h,4350h,0010h,0066h,ffffh,5d1dh,0f65
h,135ch,0000h,1900h,0007h,0008h,000fh,0a00h,000bh,4c50h,fffch,4170h,0000h,4000h,
0000h,7d00h,0620h,0000h,0000h,0000h,0000h,23beh,0000h,0040h,eeddh,4042h,54afh,fc
ech,d2bdh,004ah,2910h,c9eah,550fh,
<7>[ 9926.662190] [0:
kworker/0:1:25228] max77843_fg_write_temp: temperature
to (264, 0x1a66)
<6>[ 9926.662543] [0:
kworker/0:1:25228] max77843_fg_check_qrtable: QRTABLE2
0_REG(0x1603), QRTABLE30_REG(0x1005)
<6>[ 9926.672574] [3: kworker/u16:9:32452] [mhi_initiate_m3] Entered MHI state
4, Pending M0 0 Pending M3 0
<6>[ 9926.672604] [3: kworker/u16:9:32452] [mhi_initiate_m3] Triggering wake o
ut of M2
<6>[ 9926.683291] [2: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa268f0
<6>[ 9926.683319] [2: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9926.683422] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9926.683439] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9926.683453] [1:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT

cancelled, either running or never started


<6>[ 9926.683962] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9926.684046] [2: kworker/u16:9:32452] [mhi_initiate_m3] Cancelled M1 time
r, timer was active
<6>[ 9926.684117] [2: kworker/u16:9:32452] [mhi_initiate_m3] Waiting for M3 co
mpletion.
<7>[ 9926.686261] [0:
kworker/0:1:25228] max77843_get_fuelgauge_soc: soc(912
), low_batt_alarm(0)
<6>[ 9926.686284] [0:
kworker/0:1:25228] sec_bat_get_property cable type = 1
sleep_mode = 0
<7>[ 9926.686447] [0:
kworker/0:1:25228] max77843_chg_get_property : set-cur
rent(0mA), current now(433mA)
<6>[ 9926.686746] [0:
kworker/0:1:25228] max77843_fg_get_scaled_capacity : C
ABLE TYPE(1) INPUT CURRENT(433) CHARGINGE MODE(NONE)
<7>[ 9926.686765] [0:
kworker/0:1:25228] max77843_fg_get_scaled_capacity: ca
pacity_max (926)
<6>[ 9926.686955] [0:
kworker/0:1:25228] max77843_fg_get_scaled_capacity: sc
aled capacity (98.4)
<6>[ 9926.686972] [0:
kworker/0:1:25228] max77843_fg_get_atomic_capacity : N
OW(98), OLD(98)
<6>[ 9926.686996] [0:
kworker/0:1:25228] sec-battery battery.51: sec_bat_get
_battery_info:Vnow(4038mV),Inow(-340mA),Isysnow(-1mA),Imax(460mA),SOC(98%),Tbat(
264),Tchg(289),Twpc(0),is_hc_usb(0)
<6>[ 9926.687013] [0:
kworker/0:1:25228] sec-battery battery.51: Connected,V
avg(4087mV),Vocv(4214mV),Tamb(264),Iavg(-426mA),Isysavg(-1mA),Iadc(0)
<6>[ 9926.687816] [0:
kworker/0:1:25228] sdchg_ic_use_adc_check : SELF_DISCH
ARGING(0) SELF_DISCHARGING_ADC(0)
<6>[ 9926.687845] [0:
kworker/0:1:25228] sec-battery battery.51: sdchg_ic_us
e_discharging_check: Auto_DIS(0), Force_DIS(0)
<6>[ 9926.688038] [0:
kworker/0:1:25228] max77843_get_float_voltage: battery
cv voltage 0x1d, chg_float_voltage = 4350mV
<6>[ 9926.688058] [0:
kworker/0:1:25228] sec_bat_swelling_check: status(2),
swell_mode(0:1), cv(0x1d), temp(264)
<6>[ 9926.688069] [0:
kworker/0:1:25228] sec_bat_swelling_check: DISCHARGING
or NOT-CHARGING. stop swelling mode
<6>[ 9926.688092] [0:
kworker/0:1:25228] sec-battery battery.51: sec_bat_mon
itor_work: Status(Discharging), mode(None), Health(Good), Cable(1), level(70%),
HV(NONE), Cycle(599)
<6>[ 9926.688108] [0:
kworker/0:1:25228] power_supply battery: power_supply_
changed
<6>[ 9926.688190] [0:
kworker/0:1:25228] sec_bat_get_property cable type = 1
sleep_mode = 0
<6>[ 9926.688212] [0:
kworker/0:1:25228] sec_bat_get_property cable type = 1
<6>[ 9926.693693] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9926.693761] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 5
<6>[ 9926.693778] [1:MHI_STATE_THREA: 4605] [process_M3_transition] Processing
M3 state transition
<6>[ 9926.693818] [0: kworker/u16:9:32452] [mhi_initiate_m3] M3 completion rec
eived
<6>[ 9926.693841] [0: kworker/u16:9:32452] [mhi_turn_off_pcie_link] Entered...
<6>[ 9926.694167] [2:
healthd: 3346] sec_bat_get_property cable type = 1
sleep_mode = 0
<12>[ 9926.695029] [2:
healthd: 3346] healthd: battery l=98 v=4038 t=26.
4 h=2 st=3 c=0 o=1 ca=-426 ct=0 ps=0 chg= 2016-11-17 16:18:02.863760873 UTC
<12>[ 9926.695091] [2:
healthd: 3346] healthd: battery l=98 v=4038 t=26.
4 h=2 st=3 c=0 o=1 ca=-426 ct=0 ps=0 chg= 2016-11-17 16:18:02.863760873 UTC hv=0
sec=0 chg=

<14>[ 9926.695116] [2:


healthd: 3346] healthd-android: healthd_mode_andr
oid_battery_update
<14>[ 9926.695138] [2:
healthd: 3346] BatteryPropertiesRegistrar: notify
Listeners : start
<14>[ 9926.695210] [2:
healthd: 3346] IBatteryPropertiesListener : batte
ryPropertiesChanged!
<14>[ 9926.695210] [2:
healthd: 3346] : BatteryPropertiesRegistrar: noti
fyListeners : done
<6>[ 9926.706023] [3: kworker/u16:9:32452] mhi 0000:01:00.0: [debug] pmcsr reg
: b dev->current_state : 0
<6>[ 9926.706134] [3: kworker/u16:9:32452] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9926.706198] [3: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: ack mes
sage is ok
<6>[ 9926.706213] [3: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: receive
d Enter_L23_READY DLLP packet
<6>[ 9926.706232] [3: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[ 9926.706311] [3: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[ 9926.737649] [3: kworker/u16:9:32452] [mhi_turn_off_pcie_link] Exited...
<6>[ 9926.845495] I[0:
swapper/0:
0] exynos-pcie 10ee0000.pcie0: cp2ap_w
ake irq involked
<6>[ 9926.845548] [0:
kworker/0:1:25228] exynos-pcie 10ee0000.pcie0: PCIe: W
ake work for RC0
<6>[ 9926.845568] [0:
kworker/0:1:25228] exynos-pcie 10ee0000.pcie0: Callbac
k for the event : 4
<6>[ 9926.845582] [0:
kworker/0:1:25228] [mhi_link_state_cb] Received MSM_PC
IE_EVENT_WAKE
<6>[ 9926.845686] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 10
<6>[ 9926.845702] [1:MHI_STATE_THREA: 4605] [process_WAKE_transition] Entered
<6>[ 9926.845716] [1:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[ 9926.845733] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, start of poweron, pcie state: 0
<6>[ 9926.886256] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: D state
: 0, cd1b00
<6>[ 9926.905642] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_reset: Link up : 0x0308b211
<6>[ 9926.905944] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, end of poweron, pcie state: 3
<6>[ 9926.919468] [2:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] pmcsr reg
: 8 dev->current_state : 3
<6>[ 9926.919638] [2:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9926.919657] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
y for the link of RC0
<6>[ 9926.919671] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
config space of RC0 and its EP
<6>[ 9926.919684] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
RC0
<6>[ 9926.919717] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
EP of RC0
<6>[ 9926.920083] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Refresh
ing the saved config space in PCI framework for RC0 and its EP
<6>[ 9926.925321] [2:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[ 9926.925349] [2:MHI_STATE_THREA: 4605] [process_WAKE_transition] MHI is in
itialized, transitioning to M0.
<6>[ 9926.925365] [2:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Entered MHI state
5, Pending M0 0 Pending M3 0

<6>[ 9926.925380] [2:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Waiting for M0 M1


or M3. Currently 5...
<6>[ 9926.925395] [2:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Wait complete sta
te: 5
<6>[ 9926.925409] [2:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[ 9926.925421] [2:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[ 9926.925434] [2:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Setting M0 ...
<6>[ 9926.925477] [2:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Exited...
<6>[ 9926.925490] [2:MHI_STATE_THREA: 4605] [process_WAKE_transition] Exited.
<6>[ 9926.929424] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 5 link 1, ring type 2, index 0 db 0x5fa26910
<6>[ 9926.929445] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9926.929547] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9926.929562] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9926.929577] [2:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9926.930072] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9926.933503] [1:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 b3 17 51 00 0e 00 14 06 00
<6>[ 9926.934333] [1:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 86 19 4f 00 00 00
<6>[ 9926.948019] [1:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 86 19 4f 00 15 00 02 04 00
<6>[ 9927.014723] [2: irq/15-SSP_Int: 1775] [SSP] [M] AR-0,215,6674,4793,180,20
,0,0
<6>[ 9927.156774] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9927.156893] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[ 9927.156910] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[ 9927.156929] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9927.157124] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[ 9927.194583] [2: irq/15-SSP_Int: 1775] [SSP] [M] PD: BaroDisabled
<6>[ 9927.498019] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [P] tID:0 tc:1 tm
:0
<6>[ 9927.552531] [0: thread_hotplug:14070] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[ 9927.552553] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9927.552565] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9927.593234] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [R] tID:0 mc: 7 t
c:0 Ver[005683000]
<6>[ 9927.747541] [1:
argosd: 3378] argos_pm_qos_notify: name:UFS, spee
d:0Mbps, prev level:0, request level:-1
<6>[ 9927.750553] [1:
argosd: 3378] argos_freq_unlock name:UFS
<6>[ 9927.752619] [0: thread_hotplug:14070] frequency info : 1400000, prev_cmd
0, exe_cmd 4
<6>[ 9927.752645] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9927.752656] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9928.159449] [2: kworker/u16:6:32449] [mhi_initiate_m3] Entered MHI state
4, Pending M0 0 Pending M3 0
<6>[ 9928.159532] [2: kworker/u16:6:32449] [mhi_initiate_m3] Triggering wake o
ut of M2
<6>[ 9928.170270] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring

DB state 4 link 1, ring type 2, index 0 db 0x5fa26960


<6>[ 9928.170348] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9928.170577] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9928.170627] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9928.170675] [2:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9928.175240] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9928.175378] [3: kworker/u16:6:32449] [mhi_initiate_m3] Cancelled M1 time
r, timer was active
<6>[ 9928.175625] [3: kworker/u16:6:32449] [mhi_initiate_m3] Waiting for M3 co
mpletion.
<6>[ 9928.189030] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9928.189303] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 5
<6>[ 9928.189356] [2:MHI_STATE_THREA: 4605] [process_M3_transition] Processing
M3 state transition
<6>[ 9928.189451] [3: kworker/u16:6:32449] [mhi_initiate_m3] M3 completion rec
eived
<6>[ 9928.189521] [3: kworker/u16:6:32449] [mhi_turn_off_pcie_link] Entered...
<6>[ 9928.202866] [3: kworker/u16:6:32449] mhi 0000:01:00.0: [debug] pmcsr reg
: b dev->current_state : 0
<6>[ 9928.203056] [3: kworker/u16:6:32449] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9928.203174] [3: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: ack mes
sage is ok
<6>[ 9928.203219] [3: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: receive
d Enter_L23_READY DLLP packet
<6>[ 9928.203275] [3: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[ 9928.203456] [3: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[ 9928.233503] [3: kworker/u16:6:32449] [mhi_turn_off_pcie_link] Exited...
<6>[ 9929.405458] I[0:
swapper/0:
0] exynos-pcie 10ee0000.pcie0: cp2ap_w
ake irq involked
<6>[ 9929.405628] [0:
kworker/0:1:25228] exynos-pcie 10ee0000.pcie0: PCIe: W
ake work for RC0
<6>[ 9929.405686] [0:
kworker/0:1:25228] exynos-pcie 10ee0000.pcie0: Callbac
k for the event : 4
<6>[ 9929.405729] [0:
kworker/0:1:25228] [mhi_link_state_cb] Received MSM_PC
IE_EVENT_WAKE
<6>[ 9929.406122] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 10
<6>[ 9929.406175] [2:MHI_STATE_THREA: 4605] [process_WAKE_transition] Entered
<6>[ 9929.406221] [2:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[ 9929.406276] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, start of poweron, pcie state: 0
<6>[ 9929.446544] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: D state
: 0, 4cd100
<6>[ 9929.467784] [3:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_reset: Link up : 0x03bdbe11
<6>[ 9929.468298] [3:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, end of poweron, pcie state: 3
<6>[ 9929.489926] [3:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] pmcsr reg
: 8 dev->current_state : 3
<6>[ 9929.490227] [3:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9929.490283] [3:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover

y for the link of RC0


<6>[ 9929.490328] [3:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
config space of RC0 and its EP
<6>[ 9929.490370] [3:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
RC0
<6>[ 9929.490461] [3:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
EP of RC0
<6>[ 9929.490982] [3:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Refresh
ing the saved config space in PCI framework for RC0 and its EP
<3>[ 9929.493873] [1:irq/1-sec_touch: 1524] sec_touchkey_driver 3-0020: PRESS,
0xd 0x6 1
<6>[ 9929.499910] [3:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[ 9929.499986] [3:MHI_STATE_THREA: 4605] [process_WAKE_transition] MHI is in
itialized, transitioning to M0.
<6>[ 9929.500036] [3:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Entered MHI state
5, Pending M0 0 Pending M3 0
<6>[ 9929.500082] [3:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Waiting for M0 M1
or M3. Currently 5...
<6>[ 9929.500126] [3:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Wait complete sta
te: 5
<6>[ 9929.500168] [3:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[ 9929.500208] [3:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[ 9929.500249] [3:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Setting M0 ...
<6>[ 9929.500480] [3:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Exited...
<6>[ 9929.500520] [3:MHI_STATE_THREA: 4605] [process_WAKE_transition] Exited.
<6>[ 9929.502284] [0: kworker/u16:6:32449] [VIB] haptic_work
<6>[ 9929.502406] [0: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 5 link 1, ring type 2, index 0 db 0x5fa26980
<6>[ 9929.502435] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9929.502565] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9929.502588] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9929.502608] [0:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9929.503229] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9929.508550] [0:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 b4 17 51 00 0e 00 14 06 00
<6>[ 9929.511217] [0: kworker/u16:6:32449] [VIB] haptic_work
<6>[ 9929.511251] [0: kworker/u16:6:32449] [VIB] max77843_haptic_i2c 1
<6>[ 9929.512633] [1:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 87 19 4f 00 00 00
<6>[ 9929.515032] [1: kworker/u16:6:32449] regulator_enable returns 0
<6>[ 9929.516738] [1: kworker/u16:6:32449] [VIB] haptic_work
<6>[ 9929.517266] [1: kworker/u16:6:32449] [VIB] max77843_haptic_i2c 0
<6>[ 9929.521988] [3:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 87 19 4f 00 15 00 02 04 00
<3>[ 9929.566731] [1:irq/1-sec_touch: 1524] sec_touchkey_driver 3-0020: RELEAS
E, 0xd 0x6 1
<6>[ 9929.622997] [4:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 88 19 43 00 00 00
<6>[ 9929.631941] [5:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 8b
00 80 03 01 02 88 19 43 00 7f 00 02 04 00
<6>[ 9929.659196] [0: thread_hotplug:14070] frequency info : 1000000, prev_cmd
0, exe_cmd 4
<6>[ 9929.659221] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9929.659236] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9929.840599] [4: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0

<6>[ 9929.840636] [7:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni


ng to 3
<6>[ 9929.840651] [7:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[ 9929.840664] [7:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9929.840853] [7:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[ 9930.259184] [0: thread_hotplug:14070] frequency info : 1000000, prev_cmd
0, exe_cmd 4
<6>[ 9930.259208] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9930.259223] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9930.842588] [1: kworker/u16:6:32449] [mhi_initiate_m3] Entered MHI state
4, Pending M0 0 Pending M3 0
<6>[ 9930.842627] [1: kworker/u16:6:32449] [mhi_initiate_m3] Triggering wake o
ut of M2
<6>[ 9930.853225] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa269f0
<6>[ 9930.853274] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9930.853360] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9930.853438] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9930.853498] [0:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9930.858133] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9930.858160] [1: kworker/u16:6:32449] [mhi_initiate_m3] Cancelled M1 time
r, timer was active
<6>[ 9930.858367] [1: kworker/u16:6:32449] [mhi_initiate_m3] Waiting for M3 co
mpletion.
<6>[ 9930.870092] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9930.870208] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 5
<6>[ 9930.870239] [1:MHI_STATE_THREA: 4605] [process_M3_transition] Processing
M3 state transition
<6>[ 9930.870300] [1: kworker/u16:6:32449] [mhi_initiate_m3] M3 completion rec
eived
<6>[ 9930.870340] [1: kworker/u16:6:32449] [mhi_turn_off_pcie_link] Entered...
<6>[ 9930.882709] [1: kworker/u16:6:32449] mhi 0000:01:00.0: [debug] pmcsr reg
: b dev->current_state : 0
<6>[ 9930.882857] [1: kworker/u16:6:32449] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9930.882941] [1: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: ack mes
sage is ok
<6>[ 9930.882964] [1: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: receive
d Enter_L23_READY DLLP packet
<6>[ 9930.882992] [1: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[ 9930.883106] [1: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[ 9930.913092] [1: kworker/u16:6:32449] [mhi_turn_off_pcie_link] Exited...
<6>[ 9930.977323] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [P] tID:0 tc:1 tm
:0
<6>[ 9931.059232] [0: thread_hotplug:14070] frequency info : 800000, prev_cmd 0
, exe_cmd 4
<6>[ 9931.059265] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9931.059284] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0

<6>[ 9931.145926] [2: irq/15-SSP_Int: 1775] [SSP] [M] AR-0,-1369,7048,2192,180,


20,0,0
<6>[ 9931.162556] [0: thread_hotplug:14070] frequency info : 1200000, prev_cmd
0, exe_cmd 4
<6>[ 9931.162582] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9931.162595] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9931.753968] [1: kworker/u16:9:32452] [VIB] haptic_work
<6>[ 9931.756536] [1: kworker/u16:9:32452] [VIB] haptic_work
<6>[ 9931.756564] [1: kworker/u16:9:32452] [VIB] max77843_haptic_i2c 1
<6>[ 9931.759243] [1: kworker/u16:9:32452] regulator_enable returns 0
<6>[ 9931.759983] [3:
argosd: 3378] argos_pm_qos_notify: name:UFS, spee
d:424Mbps, prev level:-1, request level:0
<6>[ 9931.762620] [0: thread_hotplug:14070] frequency info : 1200000, prev_cmd
0, exe_cmd 4
<6>[ 9931.762646] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9931.762659] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9931.763448] [3: kworker/u16:9:32452] [VIB] haptic_work
<6>[ 9931.768672] [1:
argosd: 3378] argos_freq_lock name:UFS, CPU_MIN=0
, CPU_MAX=0, KFC_MIN=1300000, KFC_MAX=0, MIF=1264000, INT=400000
<6>[ 9931.768943] [3: kworker/u16:9:32452] [VIB] max77843_haptic_i2c 0
<6>[ 9931.965086] I[0:
Binder_C: 5864] exynos-pcie 10ee0000.pcie0: cp2ap_w
ake irq involked
<6>[ 9931.965522] [0:
kworker/0:1:25228] exynos-pcie 10ee0000.pcie0: PCIe: W
ake work for RC0
<6>[ 9931.965549] [0:
kworker/0:1:25228] exynos-pcie 10ee0000.pcie0: Callbac
k for the event : 4
<6>[ 9931.965562] [0:
kworker/0:1:25228] [mhi_link_state_cb] Received MSM_PC
IE_EVENT_WAKE
<6>[ 9931.965693] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 10
<6>[ 9931.965715] [1:MHI_STATE_THREA: 4605] [process_WAKE_transition] Entered
<6>[ 9931.965732] [1:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[ 9931.965753] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, start of poweron, pcie state: 0
<6>[ 9932.003159] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: D state
: 0, 2d4c00
<6>[ 9932.022907] [0:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_reset: Link up : 0x030bda11
<6>[ 9932.023193] [0:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, end of poweron, pcie state: 3
<6>[ 9932.036092] [3:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] pmcsr reg
: 8 dev->current_state : 3
<6>[ 9932.036260] [3:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9932.036280] [3:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
y for the link of RC0
<6>[ 9932.036294] [3:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
config space of RC0 and its EP
<6>[ 9932.036307] [3:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
RC0
<6>[ 9932.036339] [3:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
EP of RC0
<6>[ 9932.036714] [3:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Refresh
ing the saved config space in PCI framework for RC0 and its EP
<6>[ 9932.041969] [3:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[ 9932.041996] [3:MHI_STATE_THREA: 4605] [process_WAKE_transition] MHI is in
itialized, transitioning to M0.
<6>[ 9932.042011] [3:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Entered MHI state

5, Pending M0 0 Pending M3 0
<6>[ 9932.042026] [3:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Waiting for M0 M1
or M3. Currently 5...
<6>[ 9932.042040] [3:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Wait complete sta
te: 5
<6>[ 9932.042054] [3:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[ 9932.042066] [3:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[ 9932.042079] [3:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Setting M0 ...
<6>[ 9932.042127] [3:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Exited...
<6>[ 9932.042140] [3:MHI_STATE_THREA: 4605] [process_WAKE_transition] Exited.
<6>[ 9932.045427] [0: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 5 link 1, ring type 2, index 0 db 0x5fa26a10
<6>[ 9932.045454] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9932.045580] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9932.045596] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9932.045611] [1:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9932.046331] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9932.051145] [1:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 b5 17 51 00 0e 00 14 06 00
<6>[ 9932.052109] [0:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 89 19 4f 00 00 00
<6>[ 9932.063260] [0:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 89 19 4f 00 15 00 02 04 00
<6>[ 9932.271976] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9932.272020] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[ 9932.272037] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[ 9932.272058] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9932.272250] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[ 9932.490533] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [R] tID:0 mc: 75
tc:0 Ver[005683000]
<6>[ 9933.035544] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [P] tID:0 tc:1 tm
:0
<6>[ 9933.065852] [0: thread_hotplug:14070] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[ 9933.065874] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9933.065886] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9933.166557] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [R] tID:0 mc: 10
tc:0 Ver[005683000]
<6>[ 9933.272554] [1: kworker/u16:9:32452] [mhi_initiate_m3] Entered MHI state
4, Pending M0 0 Pending M3 0
<6>[ 9933.272582] [1: kworker/u16:9:32452] [mhi_initiate_m3] Triggering wake o
ut of M2
<6>[ 9933.282960] [5: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26a60
<6>[ 9933.282979] [5: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9933.283003] [5:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9933.283013] [5:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9933.283023] [5:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started

<6>[ 9933.283327] [5:MHI_STATE_THREA: 4605] [process_M0_transition] Exited


<6>[ 9933.283334] [4: kworker/u16:9:32452] [mhi_initiate_m3] Cancelled M1 time
r, timer was active
<6>[ 9933.283504] [4: kworker/u16:9:32452] [mhi_initiate_m3] Waiting for M3 co
mpletion.
<6>[ 9933.293805] [5: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9933.293833] [6:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 5
<6>[ 9933.293846] [6:MHI_STATE_THREA: 4605] [process_M3_transition] Processing
M3 state transition
<6>[ 9933.293869] [5: kworker/u16:9:32452] [mhi_initiate_m3] M3 completion rec
eived
<6>[ 9933.293884] [5: kworker/u16:9:32452] [mhi_turn_off_pcie_link] Entered...
<6>[ 9933.305911] [5: kworker/u16:9:32452] mhi 0000:01:00.0: [debug] pmcsr reg
: b dev->current_state : 0
<6>[ 9933.305998] [5: kworker/u16:9:32452] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9933.306056] [5: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: ack mes
sage is ok
<6>[ 9933.306066] [5: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: receive
d Enter_L23_READY DLLP packet
<6>[ 9933.306080] [5: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[ 9933.306143] [5: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[ 9933.334123] [5: kworker/u16:9:32452] [mhi_turn_off_pcie_link] Exited...
<6>[ 9933.365840] [0: thread_hotplug:14070] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[ 9933.365860] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9933.365871] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9933.408761] [4:
Binder_1: 4030] [SSP] batch 5: delay 180000000, tim
eout 0, flag 0, ret 0
<6>[ 9933.409240] [4:
Binder_1: 4030] [SSP] set_sensors_enable: new_enabl
e = 8737, old_enable = 8705
<6>[ 9933.409251] [4:
Binder_1: 4030] [SSP] enable_sensor: add 32, New =
180000000ns
<6>[ 9933.409262] [4:
Binder_1: 4030] [SSP] send_instruction: Inst = 0xa1
, Sensor Type = 0x5, data = 180
<6>[ 9933.415678] [5:
Binder_1: 4030] [SSP] enable_sensor: delay 180, tim
eout 0, flag=0, ret1
<6>[ 9933.479377] [2: irq/15-SSP_Int: 1775] [SSP] [M] Add 5
<6>[ 9933.479377] [2: irq/15-SSP_Int: 1775] batch rate = 220 180 0 0
<6>[ 9933.479377] [2: irq/15-SSP_Int: 1775] save bak odr 5, 1, 60, 60, 0
<6>[ 9933.479377] [2: irq/15-SSP_Int: 1775] save bak odr 5, 0, 180, 180, 80
<6>[ 9933.479377] [2: irq/15-SSP_Int: 1775] AD 5 1 0 1, 60
<6>[ 9933.661004] [0:
Binder_E: 5897] [SSP] set_sensors_enable: new_enabl
e = 8705, old_enable = 8737
<6>[ 9933.661026] [0:
Binder_E: 5897] [SSP] ssp_remove_sensor: remove sen
sor = 32, current state = 8705
<6>[ 9933.661041] [0:
Binder_E: 5897] [SSP] send_instruction: Inst = 0xa2
, Sensor Type = 0x5, data = 180
<6>[ 9933.838656] [2: irq/15-SSP_Int: 1775] [SSP] [M] save bak odr 5, 1, -1, 20
, 0
<6>[ 9933.838656] [2: irq/15-SSP_Int: 1775] save bak odr 5, 0, -1, 20, 0
<6>[ 9933.838656] [2: irq/15-SSP_Int: 1775] RM 5 0 0 0 60
<6>[ 9934.065860] [0: thread_hotplug:14070] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[ 9934.065882] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,

dm_hotplug disable = 0
<6>[ 9934.065893] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9934.511841] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [P] tID:0 tc:1 tm
:0
<6>[ 9934.565915] [0: thread_hotplug:14070] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[ 9934.565936] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9934.565948] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9934.606870] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [R] tID:0 mc: 7 t
c:0 Ver[005683000]
<6>[ 9934.772277] [1:
argosd: 3378] argos_pm_qos_notify: name:UFS, spee
d:4Mbps, prev level:0, request level:-1
<6>[ 9934.777056] [0:
argosd: 3378] argos_freq_unlock name:UFS
<6>[ 9934.865903] [0: thread_hotplug:14070] frequency info : 1200000, prev_cmd
0, exe_cmd 4
<6>[ 9934.865929] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9934.865942] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9935.065859] [0: thread_hotplug:14070] frequency info : 1200000, prev_cmd
0, exe_cmd 4
<6>[ 9935.065881] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9935.065894] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9935.095324] [2: irq/15-SSP_Int: 1775] [SSP] [M] AR-0,311,6352,5166,180,20
,0,0
<4>[ 9935.157344] I[0:
swapper/0:
0] DHCP - 0x108 [RX]
<6>[ 9935.165906] [0: thread_hotplug:14070] frequency info : 1000000, prev_cmd
0, exe_cmd 4
<6>[ 9935.165934] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9935.165949] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9935.325822] [4: kworker/u16:9:32452] [SSP] debug_work_func: (63) - Senso
r state: 0x1fc3febf, RC: 1, CC: 0 DC: 0 TC: 0
<6>[ 9935.325836] [4: kworker/u16:9:32452] [SSP] 0 : 656, 6386, 4901 (200ms, 0
ms)
<6>[ 9935.325847] [7: kworker/u16:6:32449] vfsspi_work_func_debug ldo: 3, slee
p: 0, irq: 0, tz: 1, type: viper
<6>[ 9935.325859] [4: kworker/u16:9:32452] [SSP] 9 : 46, 38, 41, 111, 245, 3 (
200ms)
<6>[ 9935.325867] [4: kworker/u16:9:32452] [SSP] 13 : 1(1ms)
<6>[ 9935.777909] [5:
argosd: 3378] argos_pm_qos_notify: name:UFS, spee
d:305Mbps, prev level:-1, request level:0
<6>[ 9935.780962] [5:
argosd: 3378] argos_freq_lock name:UFS, CPU_MIN=0
, CPU_MAX=0, KFC_MIN=1300000, KFC_MAX=0, MIF=1264000, INT=400000
<6>[ 9935.865896] [0: thread_hotplug:14070] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[ 9935.865917] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9935.865929] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9936.465903] [0: thread_hotplug:14070] frequency info : 1500000, prev_cmd
4, exe_cmd 0
<6>[ 9936.465922] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9936.465932] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9936.765880] [0: thread_hotplug:14070] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[ 9936.765901] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9936.765913] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0

<6>[ 9937.036307]
:0
<6>[ 9937.052190]
<6>[ 9937.053862]
<6>[ 9937.053885]
<6>[ 9937.055496]
<6>[ 9937.061121]
<6>[ 9937.061425]
<6>[ 9937.143292]
c:0 Ver[005683000]
<6>[ 9937.165902]
4, exe_cmd 0
<6>[ 9937.165948]
dm_hotplug disable
<6>[ 9937.165958]
<6>[ 9937.266040]
0, exe_cmd 4
<6>[ 9937.266060]
dm_hotplug disable
<6>[ 9937.266071]
<6>[ 9937.322111]
:0
<6>[ 9937.327868]
<6>[ 9937.329830]
<6>[ 9937.329852]
<6>[ 9937.333556]
<6>[ 9937.336852]
<6>[ 9937.337127]
<6>[ 9937.416852]
c:0 Ver[005683000]
<6>[ 9937.465896]
4, exe_cmd 0
<6>[ 9937.465915]
dm_hotplug disable
<6>[ 9937.465925]
<6>[ 9937.565939]
0, exe_cmd 4
<6>[ 9937.565960]
dm_hotplug disable
<6>[ 9937.565972]
<6>[ 9937.620010]
:0
<6>[ 9937.626127]
<6>[ 9937.628022]
<6>[ 9937.628046]
<6>[ 9937.630666]
<6>[ 9937.635039]
<6>[ 9937.635302]
<6>[ 9937.715292]
c:0 Ver[005683000]
<6>[ 9937.763132]
:0
<6>[ 9937.765882]
4, exe_cmd 0
<6>[ 9937.765901]
dm_hotplug disable
<6>[ 9937.765911]
<6>[ 9937.768694]
<6>[ 9937.773972]
<6>[ 9937.773995]

[1:irq/12-fts_touc: 1540] fts_touch 7-0049: [P] tID:0 tc:1 tm


[2: kworker/u16:9:32452]
[2: kworker/u16:9:32452]
[2: kworker/u16:9:32452]
[2: kworker/u16:9:32452]
[3: kworker/u16:15:32536]
[3: kworker/u16:15:32536]
[1:irq/12-fts_touc: 1540]

[VIB] haptic_work
[VIB] haptic_work
[VIB] max77843_haptic_i2c 1
regulator_enable returns 0
[VIB] haptic_work
[VIB] max77843_haptic_i2c 0
fts_touch 7-0049: [R] tID:0 mc: 8 t

[0: thread_hotplug:14070] frequency info : 1500000, prev_cmd


[0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
= 0
[0: thread_hotplug:14070] cluster1 cores hotplug out : 0
[0: thread_hotplug:14070] frequency info : 1400000, prev_cmd
[0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
= 0
[0: thread_hotplug:14070] cluster1 cores hotplug out : 0
[1:irq/12-fts_touc: 1540] fts_touch 7-0049: [P] tID:0 tc:1 tm
[1: kworker/u16:15:32536]
[1: kworker/u16:15:32536]
[1: kworker/u16:15:32536]
[1: kworker/u16:15:32536]
[1: kworker/u16:15:32536]
[2: kworker/u16:15:32536]
[1:irq/12-fts_touc: 1540]

[VIB] haptic_work
[VIB] haptic_work
[VIB] max77843_haptic_i2c 1
regulator_enable returns 0
[VIB] haptic_work
[VIB] max77843_haptic_i2c 0
fts_touch 7-0049: [R] tID:0 mc: 7 t

[0: thread_hotplug:14070] frequency info : 1500000, prev_cmd


[0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
= 0
[0: thread_hotplug:14070] cluster1 cores hotplug out : 0
[0: thread_hotplug:14070] frequency info : 1296000, prev_cmd
[0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
= 0
[0: thread_hotplug:14070] cluster1 cores hotplug out : 0
[1:irq/12-fts_touc: 1540] fts_touch 7-0049: [P] tID:0 tc:1 tm
[3: kworker/u16:15:32536]
[3: kworker/u16:15:32536]
[3: kworker/u16:15:32536]
[3: kworker/u16:15:32536]
[3: kworker/u16:15:32536]
[3: kworker/u16:15:32536]
[1:irq/12-fts_touc: 1540]

[VIB] haptic_work
[VIB] haptic_work
[VIB] max77843_haptic_i2c 1
regulator_enable returns 0
[VIB] haptic_work
[VIB] max77843_haptic_i2c 0
fts_touch 7-0049: [R] tID:0 mc: 7 t

[1:irq/12-fts_touc: 1540] fts_touch 7-0049: [P] tID:0 tc:1 tm


[0: thread_hotplug:14070] frequency info : 1500000, prev_cmd
[0:
= 0
[0:
[2:
[2:
[2:

thread_hotplug:14070] lcd is on : 1, low power mode = 0,


thread_hotplug:14070]
kworker/u16:15:32536]
kworker/u16:15:32536]
kworker/u16:15:32536]

cluster1 cores hotplug out : 0


[VIB] haptic_work
[VIB] haptic_work
[VIB] max77843_haptic_i2c 1

<6>[ 9937.783288] [0: kworker/u16:15:32536] regulator_enable returns 0


<6>[ 9937.783314] [0: kworker/u16:15:32536] [VIB] haptic_work
<6>[ 9937.783657] [0: kworker/u16:15:32536] [VIB] max77843_haptic_i2c 0
<6>[ 9937.858354] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [R] tID:0 mc: 7 t
c:0 Ver[005683000]
<6>[ 9937.918020] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [P] tID:0 tc:1 tm
:0
<6>[ 9937.923955] [3: kworker/u16:15:32536] [VIB] haptic_work
<6>[ 9937.924875] [3: kworker/u16:15:32536] [VIB] haptic_work
<6>[ 9937.924897] [3: kworker/u16:15:32536] [VIB] max77843_haptic_i2c 1
<6>[ 9937.926901] [3: kworker/u16:15:32536] regulator_enable returns 0
<6>[ 9937.932096] [3: kworker/u16:15:32536] [VIB] haptic_work
<6>[ 9937.932644] [3: kworker/u16:15:32536] [VIB] max77843_haptic_i2c 0
<6>[ 9938.025283] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [R] tID:0 mc: 8 t
c:0 Ver[005683000]
<6>[ 9938.168391] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [P] tID:0 tc:1 tm
:0
<6>[ 9938.174807] [2: kworker/u16:15:32536] [VIB] haptic_work
<6>[ 9938.175523] [2: kworker/u16:15:32536] [VIB] haptic_work
<6>[ 9938.175544] [2: kworker/u16:15:32536] [VIB] max77843_haptic_i2c 1
<6>[ 9938.179825] [2: kworker/u16:15:32536] regulator_enable returns 0
<6>[ 9938.182731] [2: kworker/u16:15:32536] [VIB] haptic_work
<6>[ 9938.192778] [0: kworker/u16:15:32536] [VIB] max77843_haptic_i2c 0
<6>[ 9938.275527] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [R] tID:0 mc: 8 t
c:0 Ver[005683000]
<6>[ 9938.361441] I[0: mali-renderer:31329] exynos-pcie 10ee0000.pcie0: cp2ap_w
ake irq involked
<6>[ 9938.361790] [0:
kworker/0:2:31050] exynos-pcie 10ee0000.pcie0: PCIe: W
ake work for RC0
<6>[ 9938.361814] [0:
kworker/0:2:31050] exynos-pcie 10ee0000.pcie0: Callbac
k for the event : 4
<6>[ 9938.361827] [0:
kworker/0:2:31050] [mhi_link_state_cb] Received MSM_PC
IE_EVENT_WAKE
<6>[ 9938.362116] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 10
<6>[ 9938.362139] [0:MHI_STATE_THREA: 4605] [process_WAKE_transition] Entered
<6>[ 9938.362154] [0:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[ 9938.362172] [0:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, start of poweron, pcie state: 0
<6>[ 9938.399547] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: D state
: 0, 1b2c00
<6>[ 9938.417469] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_reset: Link up : 0x037a6e11
<6>[ 9938.417718] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, end of poweron, pcie state: 3
<6>[ 9938.429402] [1:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] pmcsr reg
: 8 dev->current_state : 3
<6>[ 9938.429575] [1:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9938.429593] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
y for the link of RC0
<6>[ 9938.429606] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
config space of RC0 and its EP
<6>[ 9938.429617] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
RC0
<6>[ 9938.429647] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
EP of RC0
<6>[ 9938.430057] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Refresh
ing the saved config space in PCI framework for RC0 and its EP
<6>[ 9938.435461] [1:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...

<6>[ 9938.435487] [1:MHI_STATE_THREA: 4605] [process_WAKE_transition] MHI is in


itialized, transitioning to M0.
<6>[ 9938.435501] [1:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Entered MHI state
5, Pending M0 0 Pending M3 0
<6>[ 9938.435514] [1:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Waiting for M0 M1
or M3. Currently 5...
<6>[ 9938.435526] [1:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Wait complete sta
te: 5
<6>[ 9938.435538] [1:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[ 9938.435549] [1:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[ 9938.435560] [1:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Setting M0 ...
<6>[ 9938.435613] [1:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Exited...
<6>[ 9938.435624] [1:MHI_STATE_THREA: 4605] [process_WAKE_transition] Exited.
<6>[ 9938.439701] [0: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 5 link 1, ring type 2, index 0 db 0x5fa26a80
<6>[ 9938.439725] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9938.440142] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9938.440167] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9938.440180] [1:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9938.441006] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9938.444300] [0:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 b6 17 51 00 0e 00 14 06 00
<6>[ 9938.449327] [3:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 8a 19 4f 00 00 00
<6>[ 9938.458262] [2:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 8a 19 4f 00 15 00 02 04 00
<6>[ 9938.467025] [0: thread_hotplug:14070] frequency info : 1400000, prev_cmd
0, exe_cmd 4
<6>[ 9938.467045] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9938.467056] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9938.566280] [0: thread_hotplug:14070] frequency info : 1500000, prev_cmd
4, exe_cmd 0
<6>[ 9938.566299] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9938.566309] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9938.666981] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9938.667024] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[ 9938.667039] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[ 9938.667057] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9938.667248] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[ 9938.769231] [0: thread_hotplug:14070] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[ 9938.769253] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9938.769264] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9938.900410] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [P] tID:0 tc:1 tm
:0
<6>[ 9938.906329] [0: kworker/u16:15:32536] [VIB] haptic_work
<6>[ 9938.909440] [0: kworker/u16:15:32536] [VIB] haptic_work
<6>[ 9938.909463] [0: kworker/u16:15:32536] [VIB] max77843_haptic_i2c 1
<6>[ 9938.914761] [3: kworker/u16:15:32536] regulator_enable returns 0

<6>[ 9938.916014] [3: kworker/u16:15:32536] [VIB] haptic_work


<6>[ 9938.916286] [3: kworker/u16:15:32536] [VIB] max77843_haptic_i2c 0
<6>[ 9939.018801] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [R] tID:0 mc: 9 t
c:0 Ver[005683000]
<6>[ 9939.045920] [2: irq/15-SSP_Int: 1775] [SSP] [M] AR-0,966,6417,5089,180,20
,0,0
<6>[ 9939.069205] [0: thread_hotplug:14070] frequency info : 1500000, prev_cmd
4, exe_cmd 0
<6>[ 9939.069225] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9939.069235] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9939.170065] [0: thread_hotplug:14070] frequency info : 1400000, prev_cmd
0, exe_cmd 4
<6>[ 9939.170086] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9939.170097] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9939.269214] [0: thread_hotplug:14070] frequency info : 1500000, prev_cmd
4, exe_cmd 0
<6>[ 9939.269234] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9939.269244] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9939.369214] [0: thread_hotplug:14070] frequency info : 1400000, prev_cmd
0, exe_cmd 4
<6>[ 9939.369235] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9939.369246] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9939.669267] [1: kworker/u16:15:32536] [mhi_initiate_m3] Entered MHI state
4, Pending M0 0 Pending M3 0
<6>[ 9939.669294] [1: kworker/u16:15:32536] [mhi_initiate_m3] Triggering wake o
ut of M2
<6>[ 9939.679624] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26ad0
<6>[ 9939.679652] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9939.679744] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9939.679760] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9939.679775] [1:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9939.680278] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9939.680342] [2: kworker/u16:15:32536] [mhi_initiate_m3] Cancelled M1 time
r, timer was active
<6>[ 9939.680450] [2: kworker/u16:15:32536] [mhi_initiate_m3] Waiting for M3 co
mpletion.
<6>[ 9939.690017] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9939.690108] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 5
<6>[ 9939.690124] [1:MHI_STATE_THREA: 4605] [process_M3_transition] Processing
M3 state transition
<6>[ 9939.690213] [2: kworker/u16:15:32536] [mhi_initiate_m3] M3 completion rec
eived
<6>[ 9939.690235] [2: kworker/u16:15:32536] [mhi_turn_off_pcie_link] Entered...
<6>[ 9939.702755] [3: kworker/u16:15:32536] mhi 0000:01:00.0: [debug] pmcsr reg
: b dev->current_state : 0
<6>[ 9939.702851] [3: kworker/u16:15:32536] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9939.702917] [3: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: ack mes
sage is ok
<6>[ 9939.702932] [3: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: receive

d Enter_L23_READY DLLP packet


<6>[ 9939.702952] [3: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[ 9939.703034] [3: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[ 9939.733007] [3: kworker/u16:15:32536] [mhi_turn_off_pcie_link] Exited...
<6>[ 9939.994050] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [P] tID:0 tc:1 tm
:0
<6>[ 9940.136562] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [R] tID:0 mc: 11
tc:0 Ver[005683000]
<6>[ 9941.124958] [1:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 8b 19 43 00 00 00
<6>[ 9941.125016] [1:
qmuxd: 3399] [mhi_wake_dev_from_m3] Initiating M
0 work...
<6>[ 9941.125055] [2: kworker/u16:15:32536] [m0_work] No pending resume, initia
ting M0.
<6>[ 9941.125073] [2: kworker/u16:15:32536] [mhi_initiate_m0] Entered MHI state
5, Pending M0 0 Pending M3 0
<6>[ 9941.125087] [2: kworker/u16:15:32536] [mhi_initiate_m0] Waiting for M0 M1
or M3. Currently 5...
<6>[ 9941.125102] [2: kworker/u16:15:32536] [mhi_initiate_m0] Wait complete sta
te: 5
<6>[ 9941.125116] [2: kworker/u16:15:32536] [mhi_turn_on_pcie_link] Entered...
<6>[ 9941.125136] [2: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, start of poweron, pcie state: 0
<6>[ 9941.162983] [0: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: D state
: 0, 2d4c00
<6>[ 9941.183451] [2: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: exynos_
pcie_reset: Link up : 0x03a98011
<6>[ 9941.183701] [2: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, end of poweron, pcie state: 3
<6>[ 9941.195979] [2: kworker/u16:15:32536] mhi 0000:01:00.0: [debug] pmcsr reg
: 8 dev->current_state : 3
<6>[ 9941.196154] [2: kworker/u16:15:32536] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9941.196172] [2: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: Recover
y for the link of RC0
<6>[ 9941.196186] [2: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: Recover
config space of RC0 and its EP
<6>[ 9941.196200] [2: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: Recover
RC0
<6>[ 9941.196232] [2: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: Recover
EP of RC0
<6>[ 9941.196603] [2: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: Refresh
ing the saved config space in PCI framework for RC0 and its EP
<6>[ 9941.201847] [2: kworker/u16:15:32536] [mhi_turn_on_pcie_link] Exited...
<6>[ 9941.201877] [2: kworker/u16:15:32536] [mhi_initiate_m0] Setting M0 ...
<6>[ 9941.202006] [2: kworker/u16:15:32536] [mhi_initiate_m0] Exited...
<6>[ 9941.206005] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 5 link 1, ring type 2, index 0 db 0x5fa26af0
<6>[ 9941.206031] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9941.206134] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9941.206150] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9941.206166] [1:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9941.206653] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9941.217394] [2:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 9f
00 80 03 01 02 8b 19 43 00 93 00 02 04 00

<6>[ 9941.426386] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re


ceived ring 0x0
<6>[ 9941.426503] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[ 9941.426521] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[ 9941.426540] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9941.426735] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[ 9941.472183] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [P] tID:0 tc:1 tm
:0
<6>[ 9941.555354] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [R] tID:0 mc: 6 t
c:0 Ver[005683000]
<6>[ 9941.775899] [0: thread_hotplug:14070] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[ 9941.775921] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9941.775932] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9942.206081] [6: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26b30
<6>[ 9942.206098] [6: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9942.206119] [7:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9942.206131] [7:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9942.206140] [7:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work was
cancelled
<6>[ 9942.206440] [7:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9942.210293] [5:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 b7 17 51 00 0e 00 14 06 00
<6>[ 9942.211316] [5:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 8c 19 4f 00 00 00
<6>[ 9942.223357] [7:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 8c 19 4f 00 15 00 02 04 00
<6>[ 9942.277952] [2: irq/15-SSP_Int: 1775] [SSP] [M] PD: BaroDisabled
<6>[ 9942.432202] [2: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9942.432248] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[ 9942.432264] [0:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[ 9942.432285] [0:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9942.432503] [0:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[ 9942.475908] [0: thread_hotplug:14070] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[ 9942.475928] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9942.475940] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9942.817018] [2: irq/15-SSP_Int: 1775] [SSP] [M] ACVH 0 0 0 0 1 0
<6>[ 9942.817018] [2: irq/15-SSP_Int: 1775]
<6>[ 9942.997124] [2: irq/15-SSP_Int: 1775] [SSP] [M] AR-0,115,355,2443,180,20,
0,0
<6>[ 9943.176595] I[2: irq/15-SSP_Int: 1775] [SSP] ssp_sensorhub_list(4): 1, 1,
7, -1
<6>[ 9943.176629] [2: irq/15-SSP_Int: 1775] [SSP] [M] SSP Rotation Mode 0
<6>[ 9943.176678] [2:ssp_sensorhub_t: 1783] wakeup source sensorhub activation
skipped

<6>[ 9943.177508] I[2:SensorHubServic: 3439] [SSP] ssp_sensorhub_read(4): 1, 1,


7, -1
<6>[ 9943.433145] [1: kworker/u16:15:32536] [mhi_initiate_m3] Entered MHI state
4, Pending M0 0 Pending M3 0
<6>[ 9943.433173] [1: kworker/u16:15:32536] [mhi_initiate_m3] Triggering wake o
ut of M2
<6>[ 9943.444017] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26b80
<6>[ 9943.444042] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9943.444144] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9943.444160] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9943.444174] [1:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9943.444985] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9943.444997] [2: kworker/u16:15:32536] [mhi_initiate_m3] Cancelled M1 time
r, timer was active
<6>[ 9943.445018] [2: kworker/u16:15:32536] [mhi_initiate_m3] Waiting for M3 co
mpletion.
<6>[ 9943.454522] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9943.454564] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 5
<6>[ 9943.454581] [2:MHI_STATE_THREA: 4605] [process_M3_transition] Processing
M3 state transition
<6>[ 9943.454612] [0: kworker/u16:15:32536] [mhi_initiate_m3] M3 completion rec
eived
<6>[ 9943.454634] [0: kworker/u16:15:32536] [mhi_turn_off_pcie_link] Entered...
<6>[ 9943.465979] [3: kworker/u16:15:32536] mhi 0000:01:00.0: [debug] pmcsr reg
: b dev->current_state : 0
<6>[ 9943.466079] [3: kworker/u16:15:32536] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9943.466144] [3: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: ack mes
sage is ok
<6>[ 9943.466159] [3: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: receive
d Enter_L23_READY DLLP packet
<6>[ 9943.466178] [3: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[ 9943.466258] [3: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[ 9943.496156] [2: kworker/u16:15:32536] [mhi_turn_off_pcie_link] Exited...
<6>[ 9943.792990] [1:
argosd: 3378] argos_pm_qos_notify: name:UFS, spee
d:17Mbps, prev level:0, request level:-1
<6>[ 9943.804066] [1:
argosd: 3378] argos_freq_unlock name:UFS
<4>[ 9943.856124] I[0:
swapper/0:
0] DHCP - 0x108 [RX]
<6>[ 9944.254959] [2: irq/15-SSP_Int: 1775] [SSP] [M] ACVH 0 0 0 0 0 0
<6>[ 9944.254959] [2: irq/15-SSP_Int: 1775]
<6>[ 9945.152640] [2: irq/15-SSP_Int: 1775] [SSP] [M] ACVH 1 0 0 1 0 0
<6>[ 9945.152640] [2: irq/15-SSP_Int: 1775]
<6>[ 9945.694188] [2: irq/15-SSP_Int: 1775] [SSP] [M] save bak odr 0, 1, 20, 20
, 0
<6>[ 9945.694188] [2: irq/15-SSP_Int: 1775] save bak odr 0, 0, 20, 20, 0
<6>[ 9945.694188] [2: irq/15-SSP_Int: 1775] AD 0 7 1 6, 60
<6>[ 9945.694188] [2: irq/15-SSP_Int: 1775] save bak odr 0, 1, 20, 20, 0
<6>[ 9945.694188] [2: irq/15-SSP_Int: 1775] save bak odr 0, 0, 20, 20, 0
<6>[ 9945.694188] [2: irq/15-SSP_Int: 1775] RM 0 6 1 5 20
<6>[ 9945.694188] [2: irq/15-SSP_Int: 1775] SSP SIGNI Change1
<6>[ 9946.041581] I[0: cfinteractive0:14066] exynos-pcie 10ee0000.pcie0: cp2ap_w
ake irq involked

<6>[ 9946.041840] [0:


kworker/0:1:25228] exynos-pcie 10ee0000.pcie0: PCIe: W
ake work for RC0
<6>[ 9946.041918] [0:
kworker/0:1:25228] exynos-pcie 10ee0000.pcie0: Callbac
k for the event : 4
<6>[ 9946.041982] [0:
kworker/0:1:25228] [mhi_link_state_cb] Received MSM_PC
IE_EVENT_WAKE
<6>[ 9946.042366] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 10
<6>[ 9946.042402] [2:MHI_STATE_THREA: 4605] [process_WAKE_transition] Entered
<6>[ 9946.042433] [2:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[ 9946.042551] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, start of poweron, pcie state: 0
<6>[ 9946.083283] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: D state
: 0, 2f2a00
<6>[ 9946.101943] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_reset: Link up : 0x038a0411
<6>[ 9946.102443] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, end of poweron, pcie state: 3
<6>[ 9946.116315] [2:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] pmcsr reg
: 8 dev->current_state : 3
<6>[ 9946.116644] [2:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9946.116700] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
y for the link of RC0
<6>[ 9946.116745] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
config space of RC0 and its EP
<6>[ 9946.116788] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
RC0
<6>[ 9946.116878] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
EP of RC0
<6>[ 9946.117340] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Refresh
ing the saved config space in PCI framework for RC0 and its EP
<6>[ 9946.122692] [2:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[ 9946.122745] [2:MHI_STATE_THREA: 4605] [process_WAKE_transition] MHI is in
itialized, transitioning to M0.
<6>[ 9946.122792] [2:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Entered MHI state
5, Pending M0 0 Pending M3 0
<6>[ 9946.122840] [2:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Waiting for M0 M1
or M3. Currently 5...
<6>[ 9946.122884] [2:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Wait complete sta
te: 5
<6>[ 9946.122927] [2:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[ 9946.122966] [2:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[ 9946.123008] [2:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Setting M0 ...
<6>[ 9946.123240] [2:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Exited...
<6>[ 9946.123281] [2:MHI_STATE_THREA: 4605] [process_WAKE_transition] Exited.
<6>[ 9946.127640] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 5 link 1, ring type 2, index 0 db 0x5fa26ba0
<6>[ 9946.127699] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9946.127926] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9946.127976] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9946.128020] [2:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9946.132122] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9946.133701] [0:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 b8 17 51 00 0e 00 14 06 00
<6>[ 9946.134537] [0:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 b9 17 51 00 0e 00 14 06 00

<6>[ 9946.140974] [0:


qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 8d 19 4f 00 00 00
<6>[ 9946.153002] [0:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 8d 19 4f 00 15 00 02 04 00
<6>[ 9946.155345] [0:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 8e 19 4f 00 00 00
<6>[ 9946.168105] [1:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 8e 19 4f 00 15 00 02 04 00
<6>[ 9946.316105] [1: kworker/u16:15:32536] vfsspi_work_func_debug ldo: 3, slee
p: 0, irq: 0, tz: 1, type: viper
<6>[ 9946.339394] [0: kworker/u16:15:32536] [SSP] debug_work_func: (61) - Senso
r state: 0x1fc3febf, RC: 1, CC: 0 DC: 0 TC: 0
<6>[ 9946.339459] [0: kworker/u16:15:32536] [SSP] 0 : 19, 149, 8200 (200ms, 0ms
)
<6>[ 9946.339505] [0: kworker/u16:15:32536] [SSP] 9 : 137, 88, 80, 296, 245, 3
(200ms)
<6>[ 9946.339546] [0: kworker/u16:15:32536] [SSP] 13 : 1(1ms)
<6>[ 9946.377270] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9946.377537] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[ 9946.377592] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[ 9946.377651] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9946.377887] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[ 9946.410354] [2: irq/15-SSP_Int: 1775] [SSP] [M] PD: R->W
<6>[ 9946.410354] [2: irq/15-SSP_Int: 1775] save bak odr 0, 1, 20, 20, 0
<6>[ 9946.410354] [2: irq/15-SSP_Int: 1775] save bak odr 0, 0, 20, 20, 0
<6>[ 9946.410354] [2: irq/15-SSP_Int: 1775] AD 0 7 1 6, 60
<6>[ 9946.410354] [2: irq/15-SSP_Int: 1775] save bak odr 0, 1, 20, 20, 0
<6>[ 9946.410354] [2: irq/15-SSP_Int: 1775] save bak odr 0, 0, 20, 20, 0
<6>[ 9946.410354] [2: irq/15-SSP_Int: 1775] RM 0 6 1 5 20
<6>[ 9946.947124] [2: irq/15-SSP_Int: 1775] [SSP] [M] AR-0,-28,151,8190,180,20,
0,0
<6>[ 9947.381464] [3: kworker/u16:15:32536] [mhi_initiate_m3] Entered MHI state
4, Pending M0 0 Pending M3 0
<6>[ 9947.381542] [3: kworker/u16:15:32536] [mhi_initiate_m3] Triggering wake o
ut of M2
<6>[ 9947.383964] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26c20
<6>[ 9947.384043] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9947.384321] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9947.384380] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9947.384424] [2:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9947.388474] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9947.388634] [3: kworker/u16:15:32536] [mhi_initiate_m3] Cancelled M1 time
r, timer was active
<6>[ 9947.388883] [3: kworker/u16:15:32536] [mhi_initiate_m3] Waiting for M3 co
mpletion.
<6>[ 9947.402383] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9947.402654] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 5
<6>[ 9947.402708] [2:MHI_STATE_THREA: 4605] [process_M3_transition] Processing
M3 state transition

<6>[ 9947.402925] [3: kworker/u16:15:32536] [mhi_initiate_m3] M3 completion rec


eived
<6>[ 9947.402995] [3: kworker/u16:15:32536] [mhi_turn_off_pcie_link] Entered...
<6>[ 9947.416202] [3: kworker/u16:15:32536] mhi 0000:01:00.0: [debug] pmcsr reg
: b dev->current_state : 0
<6>[ 9947.416434] [3: kworker/u16:15:32536] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9947.416553] [3: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: ack mes
sage is ok
<6>[ 9947.416599] [3: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: receive
d Enter_L23_READY DLLP packet
<6>[ 9947.416655] [3: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[ 9947.416837] [3: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[ 9947.446842] [3: kworker/u16:15:32536] [mhi_turn_off_pcie_link] Exited...
<6>[ 9947.830106] [0:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 8f 19 43 00 00 00
<6>[ 9947.830277] [0:
qmuxd: 3399] [mhi_wake_dev_from_m3] Initiating M
0 work...
<6>[ 9947.830535] [1: kworker/u16:15:32536] [m0_work] No pending resume, initia
ting M0.
<6>[ 9947.830590] [1: kworker/u16:15:32536] [mhi_initiate_m0] Entered MHI state
5, Pending M0 0 Pending M3 0
<6>[ 9947.830638] [1: kworker/u16:15:32536] [mhi_initiate_m0] Waiting for M0 M1
or M3. Currently 5...
<6>[ 9947.830684] [1: kworker/u16:15:32536] [mhi_initiate_m0] Wait complete sta
te: 5
<6>[ 9947.830728] [1: kworker/u16:15:32536] [mhi_turn_on_pcie_link] Entered...
<6>[ 9947.830791] [1: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, start of poweron, pcie state: 0
<4>[ 9947.857790] I[0:
swapper/0:
0] DHCP - 0x108 [RX]
<6>[ 9947.869932] [2: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: D state
: 0, f93100
<6>[ 9947.891286] [3: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: exynos_
pcie_reset: Link up : 0x0395c311
<6>[ 9947.891780] [3: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, end of poweron, pcie state: 3
<6>[ 9947.902927] [3: kworker/u16:15:32536] mhi 0000:01:00.0: [debug] pmcsr reg
: 8 dev->current_state : 3
<6>[ 9947.903089] [3: kworker/u16:15:32536] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9947.903140] [3: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: Recover
y for the link of RC0
<6>[ 9947.903186] [3: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: Recover
config space of RC0 and its EP
<6>[ 9947.903229] [3: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: Recover
RC0
<6>[ 9947.903316] [3: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: Recover
EP of RC0
<6>[ 9947.903780] [3: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: Refresh
ing the saved config space in PCI framework for RC0 and its EP
<6>[ 9947.909163] [3: kworker/u16:15:32536] [mhi_turn_on_pcie_link] Exited...
<6>[ 9947.909219] [3: kworker/u16:15:32536] [mhi_initiate_m0] Setting M0 ...
<6>[ 9947.909454] [3: kworker/u16:15:32536] [mhi_initiate_m0] Exited...
<6>[ 9947.913691] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 5 link 1, ring type 2, index 0 db 0x5fa26c40
<6>[ 9947.913751] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9947.913984] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni

ng to 2
<6>[ 9947.914036] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9947.914081] [2:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9947.918498] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9947.925876] [1:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 95
00 80 03 01 02 8f 19 43 00 89 00 02 04 00
<6>[ 9948.135343] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9948.135666] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[ 9948.135723] [0:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[ 9948.135781] [0:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9948.136078] [0:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[ 9948.140930] [2:SSRM Handler Th: 9082] max77843_fg_read_vcell: VCELL(4070)
, data(0xcb8c)
<6>[ 9949.139439] [0: kworker/u16:15:32536] [mhi_initiate_m3] Entered MHI state
4, Pending M0 0 Pending M3 0
<6>[ 9949.139507] [0: kworker/u16:15:32536] [mhi_initiate_m3] Triggering wake o
ut of M2
<6>[ 9949.141814] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26c80
<6>[ 9949.141882] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9949.142088] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9949.142137] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9949.142182] [1:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9949.145719] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9949.145903] [0: kworker/u16:15:32536] [mhi_initiate_m3] Cancelled M1 time
r, timer was active
<6>[ 9949.146155] [0: kworker/u16:15:32536] [mhi_initiate_m3] Waiting for M3 co
mpletion.
<6>[ 9949.159586] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9949.159897] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 5
<6>[ 9949.159952] [1:MHI_STATE_THREA: 4605] [process_M3_transition] Processing
M3 state transition
<6>[ 9949.160179] [0: kworker/u16:15:32536] [mhi_initiate_m3] M3 completion rec
eived
<6>[ 9949.160249] [0: kworker/u16:15:32536] [mhi_turn_off_pcie_link] Entered...
<6>[ 9949.172812] [0: kworker/u16:15:32536] mhi 0000:01:00.0: [debug] pmcsr reg
: b dev->current_state : 0
<6>[ 9949.172967] [0: kworker/u16:15:32536] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9949.173050] [0: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: ack mes
sage is ok
<6>[ 9949.173071] [0: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: receive
d Enter_L23_READY DLLP packet
<6>[ 9949.173099] [0: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[ 9949.173215] [0: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[ 9949.203203] [0: kworker/u16:15:32536] [mhi_turn_off_pcie_link] Exited...
<6>[ 9950.839302] [3:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c

00 00 03 01 00 90 19 43 00 00 00
<6>[ 9950.839372] [3:
qmuxd: 3399] [mhi_wake_dev_from_m3] Initiating M
0 work...
<6>[ 9950.839413] [1: kworker/u16:15:32536] [m0_work] No pending resume, initia
ting M0.
<6>[ 9950.839434] [1: kworker/u16:15:32536] [mhi_initiate_m0] Entered MHI state
5, Pending M0 0 Pending M3 0
<6>[ 9950.839452] [1: kworker/u16:15:32536] [mhi_initiate_m0] Waiting for M0 M1
or M3. Currently 5...
<6>[ 9950.839469] [1: kworker/u16:15:32536] [mhi_initiate_m0] Wait complete sta
te: 5
<6>[ 9950.839485] [1: kworker/u16:15:32536] [mhi_turn_on_pcie_link] Entered...
<6>[ 9950.839510] [1: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, start of poweron, pcie state: 0
<6>[ 9950.879784] [0: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: D state
: 0, 8ffc00
<6>[ 9950.899452] [2: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: exynos_
pcie_reset: Link up : 0x0395c311
<6>[ 9950.899846] [2: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, end of poweron, pcie state: 3
<6>[ 9950.912836] [3: kworker/u16:15:32536] mhi 0000:01:00.0: [debug] pmcsr reg
: 8 dev->current_state : 3
<6>[ 9950.912994] [3: kworker/u16:15:32536] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9950.913021] [3: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: Recover
y for the link of RC0
<6>[ 9950.913043] [3: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: Recover
config space of RC0 and its EP
<6>[ 9950.913062] [3: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: Recover
RC0
<6>[ 9950.913112] [3: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: Recover
EP of RC0
<6>[ 9950.913454] [3: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: Refresh
ing the saved config space in PCI framework for RC0 and its EP
<6>[ 9950.918932] [3: kworker/u16:15:32536] [mhi_turn_on_pcie_link] Exited...
<6>[ 9950.918968] [3: kworker/u16:15:32536] [mhi_initiate_m0] Setting M0 ...
<6>[ 9950.919075] [3: kworker/u16:15:32536] [mhi_initiate_m0] Exited...
<6>[ 9950.922554] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 5 link 1, ring type 2, index 0 db 0x5fa26ca0
<6>[ 9950.922597] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9950.922932] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9950.922967] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9950.922987] [1:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9950.923833] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9950.934372] [1:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 95
00 80 03 01 02 90 19 43 00 89 00 02 04 00
<6>[ 9951.078858] [2: irq/15-SSP_Int: 1775] [SSP] [M] AR-0,-15,142,8168,180,20,
0,0
<6>[ 9951.143571] [1: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9951.143685] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[ 9951.143712] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[ 9951.143741] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9951.143943] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3

deferred work
<6>[ 9951.827082] [1:
argosd: 3378] argos_pm_qos_notify: name:UFS, spee
d:76Mbps, prev level:-1, request level:0
<6>[ 9951.835929] [0: thread_hotplug:14070] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[ 9951.835950] [0: thread_hotplug:14070] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9951.835962] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9951.838137] [0:
argosd: 3378] argos_freq_lock name:UFS, CPU_MIN=0
, CPU_MAX=0, KFC_MIN=1300000, KFC_MAX=0, MIF=1264000, INT=400000
<6>[ 9952.146440] [2: kworker/u16:15:32536] [mhi_initiate_m3] Entered MHI state
4, Pending M0 0 Pending M3 0
<6>[ 9952.146467] [2: kworker/u16:15:32536] [mhi_initiate_m3] Triggering wake o
ut of M2
<6>[ 9952.148081] [1: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26ce0
<6>[ 9952.148106] [1: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9952.148143] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9952.148158] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9952.148173] [1:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9952.148481] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9952.150479] [0: kworker/u16:15:32536] [mhi_initiate_m3] Cancelled M1 time
r, timer was active
<6>[ 9952.150660] [0: kworker/u16:15:32536] [mhi_initiate_m3] Waiting for M3 co
mpletion.
<6>[ 9952.158202] [1: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9952.158259] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 5
<6>[ 9952.158275] [1:MHI_STATE_THREA: 4605] [process_M3_transition] Processing
M3 state transition
<6>[ 9952.158327] [0: kworker/u16:15:32536] [mhi_initiate_m3] M3 completion rec
eived
<6>[ 9952.158353] [0: kworker/u16:15:32536] [mhi_turn_off_pcie_link] Entered...
<6>[ 9952.169342] [0: kworker/u16:15:32536] mhi 0000:01:00.0: [debug] pmcsr reg
: b dev->current_state : 0
<6>[ 9952.169447] [0: kworker/u16:15:32536] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9952.169512] [0: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: ack mes
sage is ok
<6>[ 9952.169527] [0: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: receive
d Enter_L23_READY DLLP packet
<6>[ 9952.169546] [0: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[ 9952.169627] [0: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[ 9952.199608] [0: kworker/u16:15:32536] [mhi_turn_off_pcie_link] Exited...
<6>[ 9953.840550] [0:
argosd: 3378] argos_pm_qos_notify: name:UFS, spee
d:23Mbps, prev level:0, request level:-1
<6>[ 9953.851489] [3:
argosd: 3378] argos_freq_unlock name:UFS
<7>[ 9954.390190] [1:companionshotTh:17787] [@][0][COM:V] fimc_is_comp_video_op
en
<7>[ 9954.390855] [1:companionshotTh:17787] [@][COM:D] fimc_is_companion_runtim
e_resume(0)
<7>[ 9954.390893] [1:companionshotTh:17787] [@][RSC] rsctype : 3, rsccount : 1
<7>[ 9954.391019] [1:companionshotTh:17787] [@][0][COM:D] fimc_is_companion_ope
n():0

<6>[ 9954.391828] [1:companionshotTh:17787] sclk_isp_sensor1 : 24Mhz


<6>[ 9954.391860] [1:companionshotTh:17787] exynos7420_fimc_is_companion_mclk_o
n(1, mclk : 24000000)
<7>[ 9954.391950] [3: kworker/u16:15:32536] [@] pin_ctrl(act(5), pin(0), val(1)
, nm(OIS_VDD_2.8V)
<7>[ 9954.391974] [3: kworker/u16:15:32536] [@] pin_ctrl(act(5), pin(0), val(1)
, nm(OIS_VM_2.8V)
<7>[ 9954.391992] [3: kworker/u16:15:32536] [@] pin_ctrl(act(1), pin(54), val(0
), nm(standby_low)
<7>[ 9954.392010] [3: kworker/u16:15:32536] [@] pin_ctrl(act(1), pin(52), val(0
), nm(rst_low)
<7>[ 9954.392027] [3: kworker/u16:15:32536] [@] pin_ctrl(act(5), pin(0), val(1)
, nm(VDDA_2.9V_VT)
<7>[ 9954.392045] [3: kworker/u16:15:32536] [@] pin_ctrl(act(5), pin(0), val(1)
, nm(VDDIO_1.8V_VT)
<7>[ 9954.392063] [3: kworker/u16:15:32536] [@] pin_ctrl(act(5), pin(0), val(1)
, nm(VDDD_1.2V_VT)
<7>[ 9954.392080] [3: kworker/u16:15:32536] [@] pin_ctrl(act(5), pin(0), val(1)
, nm(VDDIO_1.8V_CAM)
<7>[ 9954.405130] [3:companionshotTh:17787] [@][fimc_is_power_binning::1391][BI
N_INFO::4, sel 4] read path(/data/camera/ISP_CV), DCDC PMIC(0.750V)
<7>[ 9954.405206] [3:companionshotTh:17787] [@] pin_ctrl(act(5), pin(0), val(1)
, nm(VDDD_RET_1.0V_COMP)
<7>[ 9954.405226] [3:companionshotTh:17787] [@] pin_ctrl(act(5), pin(0), val(1)
, nm(VDDA_1.8V_COMP)
<7>[ 9954.405244] [3:companionshotTh:17787] [@] pin_ctrl(act(5), pin(0), val(1)
, nm(VDDD_CORE_1.0V_COMP)
<7>[ 9954.405262] [3:companionshotTh:17787] [@] pin_ctrl(act(5), pin(0), val(1)
, nm(VDDD_NORET_0.9V_COMP)
<7>[ 9954.405279] [3:companionshotTh:17787] [@] pin_ctrl(act(5), pin(0), val(1)
, nm(VDDD_CORE_0.8V_COMP)
<6>[ 9954.405440] [3:companionshotTh:17787] exynos_fimc_is_module_pin_control :
regulator_set_voltage(1000000)
<4>[ 9954.407450] [3:companionshotTh:17787] VDDD_RET_1.0V_COMP regulator is alr
eady enabled
<7>[ 9954.415756] [3:companionshotTh:17787] [@]workQueue is waited 0 times
<7>[ 9954.415884] [3:companionshotTh:17787] [@] pin_ctrl(act(1), pin(52), val(1
), nm(rst_high)
<7>[ 9954.415904] [3:companionshotTh:17787] [@] pin_ctrl(act(4), pin(0), val(2)
, nm(pin)
<7>[ 9954.415922] [3:companionshotTh:17787] [@] pin_ctrl(act(1), pin(55), val(1
), nm(comp_rst high)
<7>[ 9954.421200] [1:companionshotTh:17787] [@]already loaded the firmware, Pho
ne_Comp version=A16LSIJ0111, F-ROM_Comp version=A16LSIA0001
<7>[ 9954.422723] [1:companionshotTh:17787] [@]Companion validation: 0x73c2
<7>[ 9954.422756] [1:companionshotTh:17787] [@]fimc_is_comp_retention: start
<7>[ 9954.424636] [3:companionshotTh:17787] [@]0x0002 signature is same!
<7>[ 9954.427465] [3:companionshotTh:17787] [@]signature crc check success!
<7>[ 9954.430241] [1:companionshotTh:17787] [@]0x0002 signature is same!
<7>[ 9954.430386] [1:companionshotTh:17787] [@]fimc_is_companion_s_input: COMPA
NION STATE 1
<7>[ 9954.445970] [1:companionshotTh:17787] [@]companion_imx240_master_setfile.
bin version : A16LSIJ0111MASTR
<7>[ 9954.451060] [2:companionshotTh:17787] [@]companion_imx240_mode_setfile.bi
n version : A16LSIJ0111MOD00
<7>[ 9954.451254] [2:companionshotTh:17787] [@][0][COM:D] fimc_is_companion_s_i
nput(0, 21):0
<7>[ 9954.539983] [1:
mediaserver: 3369] [@][0][SS1:V] fimc_is_ssx_video_ope
n
<4>[ 9954.540465] [1:
mediaserver: 3369] vdd_disp_cam0: Failed to create deb

ugfs directory
<7>[ 9954.541673] [1:
mediaserver: 3369] [@][SEN:D:0] fimc_is_sensor_runtime
_resume():0
<7>[ 9954.541713] [1:
mediaserver: 3369] [@][RSC] rsctype : 0, rsccount : 2
<7>[ 9954.541732] [1:
mediaserver: 3369] [@][0][SEN:D] fimc_is_sensor_open()
:0
<7>[ 9954.541895] [1:
mediaserver: 3369] [@][0]fimc_is_sensor_mclk_on : sens
or mclk will on with companion mclk.
<7>[ 9954.542426] [1:
mediaserver: 3369] [@]fimc_is_sensor_gpio_on : sensor
gpio is already on.
<7>[ 9954.542553] [1:
mediaserver: 3369] [@][0][SEN:D] fimc_is_sensor_s_inpu
t(21, 0):0
<7>[ 9954.542888] [1:
mediaserver: 3369] [@][0][I0S:V] fimc_is_ixs_video_ope
n
<7>[ 9954.543623] [1:
mediaserver: 3369] [@][0][SCP:V] fimc_is_scp_video_ope
n
<7>[ 9954.544030] [1:
mediaserver: 3369] [@][0][I0P:V] fimc_is_ixp_video_ope
n
<7>[ 9954.544373] [1:
mediaserver: 3369] [@][0][30S:V] fimc_is_3aa_video_ope
n
<7>[ 9954.544950] [1:
mediaserver: 3369] [@][0][30C:V] fimc_is_3xc_video_ope
n
<7>[ 9954.545206] [1:
mediaserver: 3369] [@][0][30P:V] fimc_is_3xp_video_ope
n
<7>[ 9954.545551] [1:
mediaserver: 3369] [@][0][DIS:V] fimc_is_dis_video_ope
n
<7>[ 9954.546746] [1:
mediaserver: 3369] [@] fwboot : 0x0
<7>[ 9954.547428] [1:
mediaserver: 3369] [@]FIMC_IS runtime resume in
<7>[ 9954.552416] [1:
mediaserver: 3369] [@][RSC] fimc_is_ischain_runtime_re
sume: QoS LOCK [INT(560000), MIF(1456000), CAM(540000)]
<7>[ 9954.553197] [1:
mediaserver: 3369] [@]FIMC-IS runtime resume out
<7>[ 9954.553233] [1:
mediaserver: 3369] [@] fwboot : 0x0
<7>[ 9954.579566] [3:
mediaserver: 3369] [@]Phone FW version : 7420 16216-20
15/12/31 14:16:41]A16LSIL02SM
<7>[ 9954.580218] [3:
mediaserver: 3369] [@]Camera: the default FW were appl
ied successfully.
<7>[ 9954.580280] [3:
mediaserver: 3369] [@]fimc_is_ischain_config_secure :
PA_FIMC_IS_GIC_C : 0x000000f8
<7>[ 9954.580305] [3:
mediaserver: 3369] [@]fimc_is_ischain_power(1):0
<7>[ 9954.580324] [3:
mediaserver: 3369] [@][RSC] rsctype : 2, rsccount : 3
<7>[ 9954.580342] [3:
mediaserver: 3369] [@][0][ISC:D] fimc_is_ischain_open(
):0
<7>[ 9954.580562] [3:
mediaserver: 3369] [@][RSC] cluster1 minfreq : 0Mhz
<7>[ 9954.580585] [3:
mediaserver: 3369] [@][RSC] cluster1 maxfreq : 1800Mhz
<7>[ 9954.582147] [3:
mediaserver: 3369] [@][ERR]get_sensor_mode:322:could n
ot find proper sensor mode: 2608x1960@112fps
<7>[ 9954.582175] [3:
mediaserver: 3369] [@][SEN:D:0] framerate: req@112fps,
cur@112fps
<7>[ 9954.582353] [3:
mediaserver: 3369] [@]sensor mode(652x488@112) = 4
<7>[ 9954.584899] [3:
mediaserver: 3369] [@][0] =STM CFG===============
<7>[ 9954.584923] [3:
mediaserver: 3369] [@][0] STM(N) PH: 01 -> GP0 ( 11 *1
2 ) => GP2 ( *32 ) -> GP4 ( 52 )
<7>[ 9954.584941] [3:
mediaserver: 3369] [@][0] DEVICE GRAPH : 0 2 4
<7>[ 9954.584957] [3:
mediaserver: 3369] [@][0] =======================
<7>[ 9954.584978] [3:
mediaserver: 3369] [@]CAL DATA : MAP ver : V003
<7>[ 9954.584994] [3:
mediaserver: 3369] [@]Camera : Front Sensor Version :
0x11
<7>[ 9954.585011] [3:
mediaserver: 3369] [@]eeprom_fw_version = B05LLHA01PM,
phone_fw_version = A16LSIL02SM, loaded_fw_version = A16LSIL02SM
<7>[ 9954.585038] [3:
mediaserver: 3369] [@]Front Camera : the dumped Cal. d

ata was applied successfully.


<7>[ 9954.585062] [3:
mediaserver: 3369] [@][0]calibration loading is succes
s
<7>[ 9954.585228] [0: kworker/0:2H:23569] [@]IS Version: 244.130 [0x03]
<7>[ 9954.645732] [3:
mediaserver: 3369] [@]SETFILE version : 151016_S5K4E6_
CML_C2_10632 2015/10/16/14:44 E7420
<7>[ 9954.646096] [3:
mediaserver: 3369] [@]Camera: the default Setfile were
applied successfully.
<7>[ 9954.650230] [3:
mediaserver: 3369] [@][0][ISC:D] stream off ready
<7>[ 9954.657091] [3:
mediaserver: 3369] [@]input & output sizes are same(65
2, 488)
<7>[ 9954.657121] [3:
mediaserver: 3369] [@][0][SEN:D] fimc_is_sensor_back_s
tart(652x488, 0)
<7>[ 9954.657194] [3:
mediaserver: 3369] [@][0][GP2]bufs: 06, init : 0, asyn
: 1, skip: 0, sync : 0
<7>[ 9954.657276] [3:
mediaserver: 3369] [@][0][GP0]bufs: 06, init : 3, asyn
: 3, skip: 3, sync : 2
<7>[ 9954.657293] [3:
mediaserver: 3369] [@][0] =GRP CFG===============
<7>[ 9954.657310] [3:
mediaserver: 3369] [@][0][GP0] SRC10:0652x0488
<7>[ 9954.657326] [3:
mediaserver: 3369] [@][0][GP0] CAP11:0652x0652
<7>[ 9954.657341] [3:
mediaserver: 3369] [@][0][GP0] CAP12:0624x0468
<7>[ 9954.657360] [3:
mediaserver: 3369] [@][0][GP2] SRC30:0624x0468
<7>[ 9954.657379] [3:
mediaserver: 3369] [@][0][GP4] SRC50:0624x0468
<7>[ 9954.657395] [3:
mediaserver: 3369] [@][0][GP4] CAP52:0624x0468
<7>[ 9954.657412] [3:
mediaserver: 3369] [@][0] =======================
<7>[ 9954.657429] [3:
mediaserver: 3369] [@][0] TPU FULL BYPASS
<7>[ 9954.664759] [3:
mediaserver: 3369] [@][RSC] fimc_is_dvfs_sel_table(1):
0
<7>[ 9954.664786] [3:
mediaserver: 3369] [@][0][ISC:D] fimc_is_ischain_start
(33):0
<7>[ 9954.665560] [1:fimc_is_gworker:17805] [@][0][3XP][F1]ot_crop[0, 0, 624, 4
68] on
<7>[ 9954.665585] [1:fimc_is_gworker:17805] [@][0][3XP][WRN]1 frame is drop
<7>[ 9954.666271] [3:
mediaserver: 3369] [@][0][CSI] settle(652x488@112) = 2
2
<7>[ 9954.666297] [3:
mediaserver: 3369] [@][0][CSI] vci(0x32314742) = 1
<7>[ 9954.666498] [1:fimc_is_gworker:17805] [@][0][3XP][WRN]2 frame is drop
<7>[ 9954.667604] [1:fimc_is_gworker:17805] [@][0][3XP][WRN]3 frame is drop
<7>[ 9954.667855] [3:
mediaserver: 3369] [@][0][ISC:D] stream on ready(3, 3)
<7>[ 9954.667884] [3:
mediaserver: 3369] [@][WRN]couldn't find static dvfs s
cenario [sensor:(1/0)/fps:112/setfile:33/scp size:(624/468)]
<7>[ 9954.667884] [3:
mediaserver: 3369]
<7>[ 9954.667913] [3:
mediaserver: 3369] [@][0][ISC:D] tbl[1] static scenari
o(0)-[]
<7>[ 9954.701478] [2:
mediaserver: 3369] [@]DTP checking...
<7>[ 9954.702098] [1:fimc_is_gworker:17805] [@][0][3XP][WRN]4 frame is drop
<7>[ 9954.707674] [1:fimc_is_gworker:17805] [@][0][3XP][WRN]5 frame is drop
<7>[ 9954.716154] [1:fimc_is_gworker:17805] [@][0][3XP][WRN]6 frame is drop
<7>[ 9954.724299] I[0:
kswapd0: 1027] [@]grp1(res 2, rcnt 0, scnt 6), grp
2(res 3, rcnt 0, scnt 0), fcount 7(0, 0) pcount 14
<7>[ 9954.732804] [0: kworker/0:2H:23569] [@][0][GP0][WRN] complete bufs : 4
<7>[ 9954.733195] I[0:
swapper/0:
0] [@]grp1(res 3, rcnt 0, scnt 6), grp
2(res 3, rcnt 0, scnt 0), fcount 8(0, 0) pcount 14
<7>[ 9954.741622] [0: kworker/0:2H:23569] [@][0][GP0][WRN] complete bufs : 5
<7>[ 9954.742103] I[0:
swapper/0:
0] [@]grp1(res 4, rcnt 0, scnt 6), grp
2(res 3, rcnt 0, scnt 0), fcount 9(0, 0) pcount 14
<7>[ 9954.742153] [0:
mediaserver: 3369] [@][0][ISC:D] stream off ready
<7>[ 9954.752368] [0: kworker/0:2H:23569] [@][0][GP0][WRN] complete bufs : 6
<7>[ 9954.762027] [1:
mediaserver: 3369] [@][0][FRT:D] fimc_is_sensor_front_
stop(0)

<7>[ 9954.762085] [1:


mediaserver: 3369]
, time : 40ms)
<7>[ 9954.762179] [1:
mediaserver: 3369]
aiting...
<7>[ 9954.762237] [1:
mediaserver: 3369]
top(0)
<7>[ 9954.762653] [1:
mediaserver: 3369]
ued buffer is not empty(6)
<7>[ 9954.765738] [1:
mediaserver: 3369]
t: 6
<7>[ 9954.765844] [1:
mediaserver: 3369]
(6):0
<7>[ 9954.765887] [1:
mediaserver: 3369]
: 5)
<7>[ 9954.765924] [1:
mediaserver: 3369]
: 4)
<7>[ 9954.765961] [1:
mediaserver: 3369]
: 3)
<7>[ 9954.765998] [1:
mediaserver: 3369]
: 2)
<7>[ 9954.766035] [1:
mediaserver: 3369]
: 1)
<7>[ 9954.766071] [1:
mediaserver: 3369]
: 0)
<7>[ 9954.767527] [1:
mediaserver: 3369]
<7>[ 9954.768321] [1:
mediaserver: 3369]
(0):0
<7>[ 9954.769275] [1:
mediaserver: 3369]
<7>[ 9954.769321] [1:
mediaserver: 3369]
cur@30fps
<7>[ 9954.772769] [1:
mediaserver: 3369]
<7>[ 9954.772823] [1:
mediaserver: 3369]
cur@30fps
<7>[ 9954.773233] [1:
mediaserver: 3369]
<7>[ 9954.781091] [1:
mediaserver: 3369]
: 1, skip: 0, sync : 0
<7>[ 9954.781316] [1:
mediaserver: 3369]
: 1, skip: 1, sync : 2
<7>[ 9954.781357] [1:
mediaserver: 3369]
<7>[ 9954.781399] [1:
mediaserver: 3369]
<7>[ 9954.781439] [1:
mediaserver: 3369]
<7>[ 9954.781478] [1:
mediaserver: 3369]
<7>[ 9954.781524] [1:
mediaserver: 3369]
<7>[ 9954.781568] [1:
mediaserver: 3369]
<7>[ 9954.781609] [1:
mediaserver: 3369]
<7>[ 9954.781648] [1:
mediaserver: 3369]
<7>[ 9954.781689] [1:
mediaserver: 3369]
<7>[ 9954.815088] [1:
mediaserver: 3369]
(33):0
<7>[ 9954.815385] [1:
mediaserver: 3369]
08, 1960)
<7>[ 9954.815432] [1:
mediaserver: 3369]
tart(2608x1960, 0)
<7>[ 9954.817528] [1:fimc_is_gworker:17805]
, 1458]
<7>[ 9954.817585] [1:fimc_is_gworker:17805]
1080]
<7>[ 9954.817659] [1:fimc_is_gworker:17805]
1080] on
<7>[ 9954.819490] [1:
mediaserver: 3369]

[@][FRT:D:0] instant off(fcount : 0


[@][0][WRN]fimc_is_flite_stop, no w
[@][0][BAK:D] fimc_is_sensor_back_s
[@][0][WRN]video10 stream off : que
[@][0][GP0] sensor fcount: 9, fcoun
[@][0][GP0]fimc_is_ischain_3aa_stop
[@][WRN]com frame1 is flushed(count
[@][WRN]com frame2 is flushed(count
[@][WRN]com frame3 is flushed(count
[@][WRN]com frame4 is flushed(count
[@][WRN]com frame5 is flushed(count
[@][WRN]com frame6 is flushed(count
[@][0][WRN]already process stop
[@][0][GP2]fimc_is_ischain_isp_stop
[@]sensor mode(652x488@112) = 4
[@][SEN:D:0] framerate: req@30fps,
[@]sensor mode(652x488@112) = 4
[@][SEN:D:0] framerate: req@30fps,
[@]sensor mode(2608x1960@30) = 0
[@][0][GP2]bufs: 06, init : 0, asyn
[@][0][GP0]bufs: 06, init : 1, asyn
[@][0] =GRP CFG===============
[@][0][GP0] SRC10:2608x1960
[@][0][GP0] CAP11:2608x1960
[@][0][GP0] CAP12:1920x1080
[@][0][GP2] SRC30:1920x1080
[@][0][GP4] SRC50:1920x1080
[@][0][GP4] CAP52:0480x0270
[@][0] =======================
[@][0] TPU FULL BYPASS
[@][0][ISC:D] fimc_is_ischain_start
[@]input & output sizes are same(26
[@][0][SEN:D] fimc_is_sensor_back_s
[@][0][3XS][F7]in_crop[0, 246, 2592
[@][0][3XS][F7]ot_crop[0, 0, 1920,
[@][0][3XP][F7]ot_crop[0, 0, 1920,
[@][0][CSI] settle(2608x1960@30) =

22
<7>[ 9954.819546] [1:
mediaserver: 3369] [@][0][CSI] vci(0x32314742) = 1
<7>[ 9954.819712] [1:
mediaserver: 3369] [@][0][ISC:D] stream on ready(1, 1)
<7>[ 9954.819772] [1:
mediaserver: 3369] [@][WRN]couldn't find static dvfs s
cenario [sensor:(1/0)/fps:30/setfile:33/scp size:(480/270)]
<7>[ 9954.819772] [1:
mediaserver: 3369]
<7>[ 9954.819841] [1:
mediaserver: 3369] [@][0][ISC:D] tbl[1] static scenari
o(0)-[]
<7>[ 9954.913210] [1:fimc_is_gworker:17804] [@][0][SCP][F7]CRange:W
<7>[ 9954.913277] [1:fimc_is_gworker:17804] [@][0][SCP][F7]in_crop[0, 0, 1920,
1080]
<7>[ 9954.913319] [1:fimc_is_gworker:17804] [@][0][SCP][F7]ot_crop[0, 0, 480, 2
70]
<7>[ 9955.011966] [1:fimc_is_gworker:17804] [@][0][VRA][F10]bypass : 0
<6>[ 9955.027531] [2: irq/15-SSP_Int: 1775] [SSP] [M] AR-0,-33,136,8185,180,20,
0,0
<7>[ 9955.089787] [3: monitorThread:17824] [@]FIMC_IS_SYNC 76
<7>[ 9955.336948] [1:
mediaserver: 3369] [@][RSC] cluster1 minfreq : 0Mhz
<7>[ 9955.336975] [1:
mediaserver: 3369] [@][RSC] cluster1 maxfreq : 0Mhz
<7>[ 9955.348318] [3:
mediaserver: 3369] [@][0][ISC:D] stream off ready
<7>[ 9955.386574] [3:
mediaserver: 3369] [@][0][FRT:D] fimc_is_sensor_front_
stop(0)
<7>[ 9955.386694] [3:
mediaserver: 3369] [@][0][WRN]fimc_is_flite_stop, no w
aiting...
<7>[ 9955.386725] [3:
mediaserver: 3369] [@][0][BAK:D] fimc_is_sensor_back_s
top(0)
<7>[ 9955.386883] [3:
mediaserver: 3369] [@][0][WRN]video10 stream off : que
ued buffer is not empty(2)
<7>[ 9955.387269] [0: kworker/0:2H:23569] [@][0][3XP][F22][ERR] NDONE(3, E1)
<7>[ 9955.387306] [0: kworker/0:2H:23569] [@][0][GP0][F22][ERR] NDONE(3, EF(L
0 H0))
<7>[ 9955.391503] [3:
mediaserver: 3369] [@][0][GP0] sensor fcount: 22, fcou
nt: 22
<7>[ 9955.391528] [3:
mediaserver: 3369] [@][0][GP0]fimc_is_ischain_3aa_stop
(16):0
<7>[ 9955.391543] [3:
mediaserver: 3369] [@][WRN]com frame21 is flushed(coun
t : 1)
<7>[ 9955.391555] [3:
mediaserver: 3369] [@][WRN]com frame22 is flushed(coun
t : 0)
<7>[ 9955.392621] [3:
mediaserver: 3369] [@][0][WRN]video12 stream off : que
ued buffer is not empty(2)
<7>[ 9955.392943] [3:
mediaserver: 3369] [@][0][WRN]already process stop
<7>[ 9955.393478] [3:
mediaserver: 3369] [@][0][GP2]fimc_is_ischain_isp_stop
(14):0
<7>[ 9955.411432] [2:
Binder_2: 5177] [@][RSC] rsctype : 3, rsccount : 2
<7>[ 9955.411456] [2:
Binder_2: 5177] [@][0][COM:D] fimc_is_companion_clo
se(0)
<7>[ 9955.411474] [2:
Binder_2: 5177] [@][0][COM:V] fimc_is_comp_video_cl
ose():0
<7>[ 9955.411662] [2:
Binder_2: 5177] [@][0][WRN]already back stop
<7>[ 9955.411676] [2:
Binder_2: 5177] [@][0][BAK:D] fimc_is_sensor_back_s
top(0)
<7>[ 9955.411687] [2:
Binder_2: 5177] [@][0][WRN]already front stop
<7>[ 9955.411698] [2:
Binder_2: 5177] [@][0][FRT:D] fimc_is_sensor_front_
stop(0)
<7>[ 9955.411741] [2:
Binder_2: 5177] [@][RSC] rsctype : 0, rsccount : 1
<7>[ 9955.411754] [2:
Binder_2: 5177] [@][0][SEN:D] fimc_is_sensor_close(
):0
<7>[ 9955.411779] [2:
Binder_2: 5177] [@][0][SS0:V] fimc_is_ssx_video_clo
se(0):0

<7>[ 9955.411964] [2:


Binder_2: 5177] [@][0][30P:V] fimc_is_3xp_video_clo
se(6,0):0
<7>[ 9955.412043] [2:
Binder_2: 5177] [@][0][30C:V] fimc_is_3xc_video_clo
se(5,0):0
<7>[ 9955.412097] [2:
Binder_2: 5177] [@][0][WRN]already group stop
<7>[ 9955.412110] [2:
Binder_2: 5177] [@][0][WRN]already stop
<7>[ 9955.412122] [2:
Binder_2: 5177] [@][0][GP0]fimc_is_ischain_3aa_stop
(16):0
<7>[ 9955.412207] [2:
Binder_2: 5177] [@][0][30S:V] fimc_is_3aa_video_clo
se(4,0):0
<7>[ 9955.412388] [2:
Binder_2: 5177] [@][0][SCP:V] fimc_is_scp_video_clo
se(3,0):0
<7>[ 9955.412496] [2:
Binder_2: 5177] [@][0][WRN]already group stop
<7>[ 9955.412514] [2:
Binder_2: 5177] [@][0][GP2]fimc_is_ischain_isp_stop
(14):0
<7>[ 9955.412621] [2:
Binder_2: 5177] [@][0][I0S:V] fimc_is_ixs_video_clo
se(2,0):0
<7>[ 9955.412731] [2:
Binder_2: 5177] [@][0][I0P:V] fimc_is_ixp_video_clo
se(1,0):0
<7>[ 9955.412890] [2:
Binder_2: 5177] [@][0][WRN]already group stop
<7>[ 9955.412907] [2:
Binder_2: 5177] [@][0][GP4]fimc_is_ischain_dis_stop
(0):0
<7>[ 9955.430255] [2:
Binder_2: 5177] [@]A5 state(0x2000)
<7>[ 9955.430289] [2:
Binder_2: 5177] [@]FIMC_IS runtime suspend in
<7>[ 9955.434039] [2:
Binder_2: 5177] [@]FIMC_IS runtime suspend out
<7>[ 9955.434400] [2:
Binder_2: 5177] [@]fimc_is_ischain_power(0):0
<7>[ 9955.434619] [2:
kworker/2:2:13049] [@]fimc_is_sensor_gpio_off : compan
ion gpio is on. we will gpio off on device-companion
<7>[ 9955.434784] [2:
kworker/2:2:13049] [@]fimc_is_sensor_mclk_off : compan
ion clk is on. sensor mclk will off with companion mclk
<7>[ 9955.434801] [2:
kworker/2:2:13049] [@][SEN:D:0] fimc_is_sensor_runtime
_suspend():0
<7>[ 9955.435905] [2:
kworker/2:2:13049] [@]fimc_is_companion_runtime_suspen
d
<7>[ 9955.435928] [2:
kworker/2:2:13049] [@] pin_ctrl(act(4), pin(0), val(0)
, nm(pin)
<7>[ 9955.435940] [2:
kworker/2:2:13049] [@] pin_ctrl(act(4), pin(0), val(1)
, nm(pin)
<7>[ 9955.435951] [2:
kworker/2:2:13049] [@] pin_ctrl(act(4), pin(0), val(0)
, nm(pin)
<7>[ 9955.435962] [2:
kworker/2:2:13049] [@] pin_ctrl(act(1), pin(52), val(0
), nm(rst_low)
<7>[ 9955.435974] [2:
kworker/2:2:13049] [@] pin_ctrl(act(1), pin(54), val(0
), nm(standby_low)
<7>[ 9955.435985] [2:
kworker/2:2:13049] [@] pin_ctrl(act(1), pin(55), val(0
), nm(comp_rst low)
<7>[ 9955.435997] [2:
kworker/2:2:13049] [@] pin_ctrl(act(5), pin(0), val(0)
, nm(VDDD_CORE_0.8V_COMP)
<7>[ 9955.436008] [2:
kworker/2:2:13049] [@] pin_ctrl(act(5), pin(0), val(0)
, nm(VDDD_NORET_0.9V_COMP)
<7>[ 9955.436019] [2:
kworker/2:2:13049] [@] pin_ctrl(act(5), pin(0), val(0)
, nm(VDDD_CORE_1.0V_COMP)
<7>[ 9955.436031] [2:
kworker/2:2:13049] [@] pin_ctrl(act(5), pin(0), val(0)
, nm(VDDA_1.8V_COMP)
<7>[ 9955.436042] [2:
kworker/2:2:13049] [@] pin_ctrl(act(5), pin(0), val(1)
, nm(VDDD_RET_1.0V_COMP)
<7>[ 9955.436054] [2:
kworker/2:2:13049] [@] pin_ctrl(act(5), pin(0), val(0)
, nm(VDDD_1.2V_VT)
<7>[ 9955.436067] [2:
kworker/2:2:13049] [@] pin_ctrl(act(5), pin(0), val(0)
, nm(VDDA_2.9V_VT)

<7>[ 9955.436078] [2:


kworker/2:2:13049] [@] pin_ctrl(act(5), pin(0), val(0)
, nm(VDDIO_1.8V_VT)
<7>[ 9955.436089] [2:
kworker/2:2:13049] [@] pin_ctrl(act(5), pin(0), val(0)
, nm(VDDIO_1.8V_CAM)
<7>[ 9955.436101] [2:
kworker/2:2:13049] [@] pin_ctrl(act(5), pin(0), val(0)
, nm(OIS_VDD_2.8V)
<7>[ 9955.436112] [2:
kworker/2:2:13049] [@] pin_ctrl(act(5), pin(0), val(0)
, nm(OIS_VM_2.8V)
<6>[ 9955.439698] [2:
kworker/2:2:13049] exynos_fimc_is_module_pin_control :
regulator_set_voltage(700000)
<4>[ 9955.440725] [2:
kworker/2:2:13049] VDDD_RET_1.0V_COMP regulator is alr
eady enabled
<7>[ 9955.453394] [2:
kworker/2:2:13049] [@]fimc_is_companion_gpio_off: COMP
ANION STATE 2
<7>[ 9955.453860] [2:
kworker/2:2:13049] [@][COM:D] fimc_is_companion_runtim
e_suspend(0)
<7>[ 9955.454897] [3:
Binder_2: 5177] [@][RSC] rsctype : 2, rsccount : 0
<7>[ 9955.454999] [3:
Binder_2: 5177] [@][0][ISC:D] fimc_is_ischain_close
():0
<7>[ 9955.455026] [3:
Binder_2: 5177] [@][0][DIS:V] fimc_is_dis_video_clo
se(0,0):0
<6>[ 9956.690834] [0:
kworker/0:1:25228] [Time-to-FULL] 368634(secs), 6143(m
ins)
<6>[ 9956.691230] [0:
kworker/0:1:25228] [Time-to-EMPTY] 16475(secs), 274(mi
ns)
<6>[ 9956.735573] [0:
kworker/0:1:25228] [FG] 0080h,ffa5h,7f80h,ff01h,1900h,
0f6bh,5b16h,53b1h,1a66h,cc08h,fb05h,f5ebh,011ch,54ech,5ca3h,0fc3h,1047h,0ba1h,33
80h,5c00h,0698h,0148h,19f7h,5c1ch,1439h,caech,2c0fh,da96h,41a5h,0314h,0320h,0ea8
h,ffffh,20b0h,2000h,127ch,1400h,2305h,19f7h,807ch,2472h,cea4h,203bh,09d0h,e3e1h,
290eh,0400h,0000h,58dah,35e4h,1603h,0241h,0000h,10eeh,ebc8h,05e0h,0050h,1a45h,7d
54h,f5d6h,1680h,1008h,51beh,e000h,0000h,a900h,1005h,0000h,cda9h,0a8bh,7210h,0010
h,5df9h,2271h,0fc0h,0000h,d90dh,d770h,e27eh,0000h,0000h,0000h,7f80h,0000h,0000h,
0005h,011ah,05e4h,0000h,006bh,090ch,0050h,1045h,0204h,094dh,0000h,039eh,100fh,0c
0eh,0c0dh,0c0ch,0c0bh,0c0ah,0c09h,0c08h,a516h,4350h,0010h,0065h,ffffh,5ceeh,0f5e
h,1915h,0401h,2d00h,0008h,167eh,0000h,7fffh,ffffh,4c50h,fffch,4170h,0000h,4000h,
0000h,acf0h,0620h,0000h,0000h,0000h,0000h,239ch,0000h,0040h,024eh,403eh,5592h,fe
35h,d299h,004ah,2910h,cc08h,54dch,
<7>[ 9956.737713] [0:
kworker/0:1:25228] max77843_fg_write_temp: temperature
to (268, 0x1acd)
<6>[ 9956.738308] [0:
kworker/0:1:25228] max77843_fg_check_qrtable: QRTABLE2
0_REG(0x1603), QRTABLE30_REG(0x1005)
<7>[ 9956.743290] [0:
kworker/0:1:25228] max77843_get_fuelgauge_soc: soc(910
), low_batt_alarm(0)
<6>[ 9956.743348] [0:
kworker/0:1:25228] sec_bat_get_property cable type = 1
sleep_mode = 0
<7>[ 9956.743667] [0:
kworker/0:1:25228] max77843_chg_get_property : set-cur
rent(0mA), current now(433mA)
<6>[ 9956.743984] [0:
kworker/0:1:25228] max77843_fg_get_scaled_capacity : C
ABLE TYPE(1) INPUT CURRENT(433) CHARGINGE MODE(NONE)
<7>[ 9956.744028] [0:
kworker/0:1:25228] max77843_fg_get_scaled_capacity: ca
pacity_max (926)
<6>[ 9956.744347] [0:
kworker/0:1:25228] max77843_fg_get_scaled_capacity: sc
aled capacity (98.2)
<6>[ 9956.744390] [0:
kworker/0:1:25228] max77843_fg_get_atomic_capacity : N
OW(98), OLD(98)
<6>[ 9956.744463] [0:
kworker/0:1:25228] sec-battery battery.51: sec_bat_get
_battery_info:Vnow(4080mV),Inow(-199mA),Isysnow(-1mA),Imax(460mA),SOC(98%),Tbat(
268),Tchg(299),Twpc(0),is_hc_usb(0)
<6>[ 9956.744518] [0:
kworker/0:1:25228] sec-battery battery.51: Connected,V
avg(4058mV),Vocv(4211mV),Tamb(268),Iavg(-403mA),Isysavg(-1mA),Iadc(0)

<6>[ 9956.745472] [0:


kworker/0:1:25228] sdchg_ic_use_adc_check : SELF_DISCH
ARGING(0) SELF_DISCHARGING_ADC(0)
<6>[ 9956.745524] [0:
kworker/0:1:25228] sec-battery battery.51: sdchg_ic_us
e_discharging_check: Auto_DIS(0), Force_DIS(0)
<6>[ 9956.745828] [0:
kworker/0:1:25228] max77843_get_float_voltage: battery
cv voltage 0x1d, chg_float_voltage = 4350mV
<6>[ 9956.745874] [0:
kworker/0:1:25228] sec_bat_swelling_check: status(2),
swell_mode(0:1), cv(0x1d), temp(268)
<6>[ 9956.745913] [0:
kworker/0:1:25228] sec_bat_swelling_check: DISCHARGING
or NOT-CHARGING. stop swelling mode
<6>[ 9956.745973] [0:
kworker/0:1:25228] sec-battery battery.51: sec_bat_mon
itor_work: Status(Discharging), mode(None), Health(Good), Cable(1), level(70%),
HV(NONE), Cycle(599)
<6>[ 9956.746024] [0:
kworker/0:1:25228] power_supply battery: power_supply_
changed
<6>[ 9956.746215] [0:
kworker/0:1:25228] sec_bat_get_property cable type = 1
sleep_mode = 0
<6>[ 9956.746280] [0:
kworker/0:1:25228] sec_bat_get_property cable type = 1
<6>[ 9956.758353] [1:
healthd: 3346] sec_bat_get_property cable type = 1
sleep_mode = 0
<12>[ 9956.760855] [1:
healthd: 3346] healthd: battery l=98 v=4080 t=26.
8 h=2 st=3 c=0 o=1 ca=-403 ct=0 ps=0 chg= 2016-11-17 16:18:32.928741685 UTC
<12>[ 9956.760979] [1:
healthd: 3346] healthd: battery l=98 v=4080 t=26.
8 h=2 st=3 c=0 o=1 ca=-403 ct=0 ps=0 chg= 2016-11-17 16:18:32.928741685 UTC hv=0
sec=0 chg=
<14>[ 9956.761053] [1:
healthd: 3346] healthd-android: healthd_mode_andr
oid_battery_update
<14>[ 9956.761122] [1:
healthd: 3346] BatteryPropertiesRegistrar: notify
Listeners : start
<14>[ 9956.761299] [1:
healthd: 3346] IBatteryPropertiesListener : batte
ryPropertiesChanged!
<14>[ 9956.761299] [1:
healthd: 3346] : BatteryPropertiesRegistrar: noti
fyListeners : done
<6>[ 9957.215597] [2:PhotonicModulat: 5207] dsim_panel_set_brightness : platfor
m : 15, : mapping : 15, real : 15, index : 13, interpolation : 0
<6>[ 9957.222024] [0:PhotonicModulat: 5207] dsim_panel_get_elvssoffset 0
<6>[ 9957.222084] [0:PhotonicModulat: 5207] vint: 21
<6>[ 9957.222150] [0:PhotonicModulat: 5207] acl : 2, opr: 12
<6>[ 9957.222168] [0:PhotonicModulat: 5207] acl: 2(50), auto_brightness: 0
<6>[ 9957.222201] [0:PhotonicModulat: 5207] dsim_panel_set_tset temperature: 25
, tset: 25
<6>[ 9957.222231] [0:PhotonicModulat: 5207] hbm: 0, auto_brightness: 0
<6>[ 9957.326849] [3: kworker/u16:6:32449] vfsspi_work_func_debug ldo: 3, slee
p: 0, irq: 0, tz: 1, type: viper
<6>[ 9957.352697] [0: kworker/u16:6:32449] [SSP] debug_work_func: (61) - Senso
r state: 0x1fc3febf, RC: 1, CC: 0 DC: 0 TC: 0
<6>[ 9957.352767] [0: kworker/u16:6:32449] [SSP] 0 : 36, 166, 8155 (200ms, 0ms
)
<6>[ 9957.352815] [0: kworker/u16:6:32449] [SSP] 9 : 137, 88, 79, 295, 245, 3
(200ms)
<6>[ 9957.352855] [0: kworker/u16:6:32449] [SSP] 13 : 1(1ms)
<6>[ 9958.980320] [2: irq/15-SSP_Int: 1775] [SSP] [M] AR-0,-22,147,8134,180,20,
0,0
<6>[ 9960.630729] [0:PhotonicModulat: 5207] dsim_panel_set_brightness : platfor
m : 0, : mapping : 2, real : 2, index : 0, interpolation : 0
<6>[ 9960.636222] [0:PhotonicModulat: 5207] dsim_panel_get_elvssoffset 0
<6>[ 9960.636335] [0:PhotonicModulat: 5207] vint: 18
<6>[ 9960.636464] [0:PhotonicModulat: 5207] acl : 2, opr: 12
<6>[ 9960.636503] [0:PhotonicModulat: 5207] acl: 2(50), auto_brightness: 0

<6>[ 9960.636570] [0:PhotonicModulat: 5207] dsim_panel_set_tset temperature: 25


, tset: 25
<6>[ 9960.636632] [0:PhotonicModulat: 5207] hbm: 0, auto_brightness: 0
<6>[ 9960.883273] [0:
Binder_3:30892] [SSP] ssp_sensorhub_write(4): -78,
7, 0, 0
<6>[ 9960.883323] [0:
Binder_3:30892] [SSP] send_instruction: Inst = 0xb2
, Sensor Type = 0x7, data = 0
<6>[ 9960.919773] [6:PmsDisplayThrea:17874] fts_touch 7-0049: fts_stop_device
<6>[ 9960.919784] [5:PmsDisplayThrea:17873] sec_touchkey_driver 3-0020: touchke
y_power_on: off
<6>[ 9960.919801] [6:PmsDisplayThrea:17874] fts_touch 7-0049: FTS INT Disable
<6>[ 9960.920087] [6:PmsDisplayThrea:17874] fts_touch 7-0049: FTS Command (A1)
, ret = 1
<6>[ 9960.920187] [6:PmsDisplayThrea:17874] fts_touch 7-0049: FTS Command (90)
, ret = 1
<6>[ 9960.922307] [6:PmsDisplayThrea:17874] fts_touch 7-0049: fts_power_ctrl: o
ff
<6>[ 9960.924761] [2:PmsDisplayThrea: 4338] LCD off
<6>[ 9960.924794] [2:PmsDisplayThrea: 4338] is_lcd_on is FALSE
<6>[ 9960.932988] [2: surfaceflinger: 3350] decon_blank ++ blank_mode : 4
<6>[ 9960.933007] [2: surfaceflinger: 3350] decon-int POWERDOWN mode: 0type (0:
DSI, 1: HDMI, 2:WB)
<6>[ 9960.955208] [2: irq/15-SSP_Int: 1775] [SSP] [M] save bak odr 0, 1, 20, 20
, 0
<6>[ 9960.955208] [2: irq/15-SSP_Int: 1775] save bak odr 0, 0, 20, 20, 0
<6>[ 9960.955208] [2: irq/15-SSP_Int: 1775] RM 0 5 1 4 60
<6>[ 9960.955208] [2: irq/15-SSP_Int: 1775] SMR 7 1 0
<6>[ 9960.955208] [2: irq/15-SSP_Int: 1775] RL7 0 0 8705 1441151885120634888
<6>[ 9960.956205] [1: surfaceflinger: 3350] dsim_disable ++
<6>[ 9960.956315] [1: surfaceflinger: 3350] MDD : s6e3ha2_wqhd_exit was called
<6>[ 9960.996825] [1:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 17
00 00 e3 02 00 70 00 00 00 0b 00 01 08 00
<6>[ 9960.996888] [1:
qmuxd: 3399] [mhi_wake_dev_from_m3] Initiating M
0 work...
<6>[ 9960.996982] [1: kworker/u16:6:32449] [m0_work] No pending resume, initia
ting M0.
<6>[ 9960.997001] [1: kworker/u16:6:32449] [mhi_initiate_m0] Entered MHI state
5, Pending M0 0 Pending M3 0
<6>[ 9960.997017] [1: kworker/u16:6:32449] [mhi_initiate_m0] Waiting for M0 M1
or M3. Currently 5...
<6>[ 9960.997032] [1: kworker/u16:6:32449] [mhi_initiate_m0] Wait complete sta
te: 5
<6>[ 9960.997045] [1: kworker/u16:6:32449] [mhi_turn_on_pcie_link] Entered...
<6>[ 9960.997067] [1: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, start of poweron, pcie state: 0
<6>[ 9961.036654] [3: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: D state
: 0, 7d4e00
<6>[ 9961.056448] [0: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: exynos_
pcie_reset: Link up : 0x038aa411
<6>[ 9961.056855] [0: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, end of poweron, pcie state: 3
<6>[ 9961.069533] [0: kworker/u16:6:32449] mhi 0000:01:00.0: [debug] pmcsr reg
: 8 dev->current_state : 3
<6>[ 9961.069707] [0: kworker/u16:6:32449] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9961.069739] [0: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: Recover
y for the link of RC0
<6>[ 9961.069768] [0: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: Recover
config space of RC0 and its EP
<6>[ 9961.069795] [0: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: Recover

RC0
<6>[ 9961.069851] [0: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: Recover
EP of RC0
<6>[ 9961.070375] [0: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: Refresh
ing the saved config space in PCI framework for RC0 and its EP
<6>[ 9961.075920] [0: kworker/u16:6:32449] [mhi_turn_on_pcie_link] Exited...
<6>[ 9961.075954] [0: kworker/u16:6:32449] [mhi_initiate_m0] Setting M0 ...
<6>[ 9961.076035] [0: kworker/u16:6:32449] [mhi_initiate_m0] Exited...
<6>[ 9961.079747] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 5 link 1, ring type 2, index 0 db 0x5fa26d00
<6>[ 9961.079786] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9961.079971] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9961.080003] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9961.080030] [0:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9961.084563] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9961.091927] [1:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 13
00 80 e3 02 02 70 00 00 00 07 00 02 04 00
<6>[ 9961.097781] [2:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 a3
00 00 03 01 00 91 19 50 00 97 00 10 11 00
<6>[ 9961.103036] [0: surfaceflinger: 3350] dsim_disable -<4>[ 9961.103083] [0: surfaceflinger: 3350] decon 13930000.decon_fb: pm_relax
<6>[ 9961.103139] [0: surfaceflinger: 3350] decon_blank -- blank_mode : 4
<6>[ 9961.103254] [0: surfaceflinger: 3350] dsim_panel_set_brightness : panel i
s not active state..
<6>[ 9961.103285] [0: surfaceflinger: 3350] mdnie mdnie: fb_notifier_callback:
4
<6>[ 9961.103325] [0: surfaceflinger: 3350] LCD is off
<6>[ 9961.103430] [1: kworker/u16:6:32449] mailbox: apm -> hsi2c mode
<6>[ 9961.112433] [1:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 13
00 80 03 01 02 91 19 50 00 07 00 02 04 00
<6>[ 9961.115410] [2:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 10
00 00 03 01 00 92 19 02 00 04 00 12 01 00
<6>[ 9961.126515] [1:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 13
00 80 03 01 02 92 19 02 00 07 00 02 04 00
<6>[ 9961.128107] [1:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 44
00 00 03 01 00 93 19 03 00 38 00 10 01 00
<6>[ 9961.141701] [1:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 13
00 80 03 01 02 93 19 03 00 07 00 02 04 00
<6>[ 9961.146483] [3:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 17
00 00 03 01 00 94 19 70 00 0b 00 01 08 00
<6>[ 9961.160196] [2:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 13
00 80 03 01 02 94 19 70 00 07 00 02 04 00
<6>[ 9961.214120] [3:
mc_log: 3354] MobiCore mcd: b01|[Driver Template]
drMain(): driver startedSEC_SPI_DRIVER_1.0_2015.11.27.
<6>[ 9961.304513] [0:
Binder_2:30887] [SSP] ssp_sensorhub_write(4): -76,
13, -46, 0
<6>[ 9961.311412] [0:
Binder_2:30887] [SSP] ssp_send_cmd: command 0xd2 0
<6>[ 9961.314662] [2: irq/15-SSP_Int: 1775] [SSP] [M] save bak odr 0, 1, 20, 20
, 0
<6>[ 9961.314662] [2: irq/15-SSP_Int: 1775] save bak odr 0, 0, 20, 20, 0
<6>[ 9961.314662] [2: irq/15-SSP_Int: 1775] AD 0 6 1 5, 20
<6>[ 9961.314662] [2: irq/15-SSP_Int: 1775] save bak odr 0, 1, 20, 20, 0
<6>[ 9961.314662] [2: irq/15-SSP_Int: 1775] save bak odr 0, 0, 20, 20, 0
<6>[ 9961.314662] [2: irq/15-SSP_Int: 1775] RM 0 5 1 4 60
<6>[ 9961.314662] [2: irq/15-SSP_Int: 1775] SSP SIGNI Change2
<6>[ 9961.314662] [2: irq/15-SSP_Int: 1775] PD: Ref E(0),I(1)
<6>[ 9961.314991] [3:sensorhubservic: 3377] [SSP] ssp_sensorhub_write(5): -63,

14, 16, 18, 37


<6>[ 9961.315018] [3:sensorhubservic: 3377] [SSP] send_instruction: Inst = 0xc1
, Sensor Type = 0xe, data = 16
<6>[ 9961.369421] [2: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9961.369596] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[ 9961.369618] [0:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[ 9961.369640] [0:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9961.369836] [0:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[ 9961.377450] [2:
mc_log: 3354] MobiCore mcd: d01|Trustlet FingerPr
int::Starting
<6>[ 9961.389236] [0:
mc_log: 3354] MobiCore mcd: d01|FINGERPRINT comma
ndId :11
<6>[ 9961.389497] [0:
mc_log: 3354] MobiCore mcd: d01|Trustlet Fingerpr
int::Returning 0
<6>[ 9961.392927] [0:
mc_log: 3354] MobiCore mcd: d01|FINGERPRINT comma
ndId :12
<6>[ 9961.394035] [0:
mc_log: 3354] MobiCore mcd: d01|Trustlet Fingerpr
int::Returning 0
<6>[ 9961.394686] [0: fingerprintd: 3410] vfsspi_ioctl VFSSPI_IOCTL_SET_LOCKS
CREEN :ON
<6>[ 9961.402843] [1:
mc_log: 3354] MobiCore mcd: d01|FINGERPRINT comma
ndId :c
<6>[ 9961.404485] [1:
mc_log: 3354] MobiCore mcd: d01|do_extra_control
opcode : 48
<6>[ 9961.404511] [1:
mc_log: 3354] MobiCore mcd: d01|Trustlet Fingerpr
int::Returning 0
<6>[ 9961.412622] [1:
mc_log: 3354] MobiCore mcd: d01|FINGERPRINT comma
ndId :c
<6>[ 9961.415926] [1:
mc_log: 3354] MobiCore mcd: d01|do_extra_control
opcode : 37
<6>[ 9961.491951] [2: irq/15-SSP_Int: 1775] [SSP] [M] AT-SetTS1 58717819 587170
00
<6>[ 9961.491951] [2: irq/15-SSP_Int: 1775] PD: TimeNoti 16 18 37
<6>[ 9961.599390] [0:
mc_log: 3354] MobiCore mcd: e01|ccccccccccccccccc
cccccccccTL_TZ_CCM: tciBufferLen = 38912 = 0x9800
<6>[ 9961.599417] [0:
mc_log: 3354] MobiCore mcd: e01|Trustlet TL_TZ_CC
M: Starting
<6>[ 9961.599429] [0:
mc_log: 3354] MobiCore mcd: e01|TL_TZ_CCM: tciBuf
ferLen = 38912 = 0x9800
<6>[ 9961.602522] [0:
mc_log: 3354] MobiCore mcd: e01|TL_TZ_CCM: sendms
g envelope length = 19456 = 0x4c00
<6>[ 9961.602540] [0:
mc_log: 3354] MobiCore mcd: e01|TL_TZ_CCM: sendms
g = 00092c80, respmsg = 0009785c
<6>[ 9961.602553] [0:
mc_log: 3354] MobiCore mcd: e01|Trustlet TL_TZ_CC
M: Got a message!
<6>[ 9961.602564] [0:
mc_log: 3354] MobiCore mcd: e01|TZ_CCM: we got a
command
<6>[ 9961.602577] [0:
mc_log: 3354] MobiCore mcd: e01|TZ_CCM: process_c
md: CMD_TZ_CCM_C_Initialize:
<6>[ 9961.602590] [0:
mc_log: 3354] MobiCore mcd: e01|TIMA trustlet: Re
ading knox license status
<6>[ 9961.602603] [0:
mc_log: 3354] MobiCore mcd: e01|TIMA trustlet: g
et_sec_TIMA_address tima_sec_mem_addr : FE800000
<6>[ 9961.602615] [0:
mc_log: 3354] MobiCore mcd: 501|drTima: processin
g TIMA_DRIVER_PHYS_MEM_ACCESS_COPY

<6>[ 9961.606040] [0:


mc_log: 3354] MobiCore mcd: 501|drTima: data_len
= 4 = 0x4
<6>[ 9961.606057] [0:
mc_log: 3354] MobiCore mcd: 501|drTima: PHYS_READ
<6>[ 9961.606070] [0:
mc_log: 3354] MobiCore mcd: e01|read license stat
us is: 0
<6>[ 9961.606081] [0:
mc_log: 3354] MobiCore mcd: e01|low security mode
<6>[ 9961.606093] [0:
mc_log: 3354] MobiCore mcd: 501|drTima: processin
g TIMA_DRIVER_PHYS_MEM_ACCESS_COPY
<6>[ 9961.606105] [0:
mc_log: 3354] MobiCore mcd: 501|drTima: data_len
= 32 = 0x20
<6>[ 9961.606116] [0:
mc_log: 3354] MobiCore mcd: 501|drTima: PHYS_READ
<6>[ 9961.607952] [2:
mc_log: 3354] MobiCore mcd: e01|TIMA trustlet: wa
rranty violation detected 18
<6>[ 9961.607968] [2:
mc_log: 3354] MobiCore mcd: e01|TZ_COMMON: Initia
lize failed - tamper fuse set
<6>[ 9961.607981] [2:
mc_log: 3354] MobiCore mcd: e01|TL_TZ_CCM: TL CCM
general initialization failure
<6>[ 9961.607994] [2:
mc_log: 3354] MobiCore mcd: e01|Trustlet TL_TZ_CC
M: sendmsg->header.id = 0x00000002
<6>[ 9961.608007] [2:
mc_log: 3354] MobiCore mcd: e01|Trustlet TL_TZ_CC
M: respmsg->header.id = 0x80000002
<6>[ 9961.608020] [2:
mc_log: 3354] MobiCore mcd: e01|Trustlet TL_TZ_CC
M: respmsg->header.status = 0x00000000
<6>[ 9961.608032] [2:
mc_log: 3354] MobiCore mcd: e01|Trustlet TL_TZ_CC
M: Returning = 0x00000000
<6>[ 9961.611423] [2:
mc_log: 3354] MobiCore mcd: d01|Trustlet Fingerpr
int::Returning 0
<6>[ 9961.615976] [1:
mc_log: 3354] MobiCore mcd: 104| SMGNT send MSG_C
LOSE_TRUSTLET for thread e01 to IPCH
<6>[ 9961.616003] [1:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 202 (UUID=02010000-0000-0000-0000-000000005000) (server 0/8 status i
s 00000001)
<6>[ 9961.619235] [2:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 302 (UUID=ffffffff-0000-0000-0000-000000000002) (server 1/8 status i
s 00000001)
<6>[ 9961.619259] [2:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 402 (UUID=ffffffff-0000-0000-0000-000000000001) (server 2/8 status i
s 00000001)
<6>[ 9961.619275] [2:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 501 (UUID=ffffffff-d000-0000-0000-00000000000a) (server 3/8 status i
s 00000001)
<6>[ 9961.622690] [0:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 602 (UUID=ffffffff-d000-0000-0000-000000000016) (server 4/8 status i
s 00000001)
<6>[ 9961.622714] [0:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 702 (UUID=07050500-0000-0000-0000-000000000000) (server 5/8 status i
s 00000001)
<6>[ 9961.625924] [0:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to b02 (UUID=ffffffff-d000-0000-0000-00000000000e) (server 6/8 status i
s 00000001)
<6>[ 9961.625944] [0:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 902 (UUID=ffffffff-d000-0000-0000-000000000014) (server 7/8 status i
s 00000001)
<6>[ 9961.627928] [0:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop do
ne
<6>[ 9961.627943] [0:
mc_log: 3354] MobiCore mcd: 501|drTima: MSG_CLOSE
_TRUSTLET call 0x40001
<6>[ 9961.629320] [0:
mc_log: 3354] MobiCore mcd: b02|Driver SPI receiv
es MSG_CLOSE_TRUSTLET[0x00040001, 0x0001000e]
<6>[ 9961.630024] [2:
mc_log: 3354] MobiCore mcd: 104| SMGNT smgntClose

Session done
<6>[ 9961.630039] [2:
mc_log:
ndId :c
<6>[ 9961.632773] [0:
mc_log:
opcode : 47
<6>[ 9961.639185] [1:
mc_log:
int::Returning 0
<3>[ 9961.640902] [3:
tlc_server:
name(tlc_server)
<6>[ 9961.690815] [2: mSvcLEDThread:
gb_pattern
<6>[ 9961.690850] [2: mSvcLEDThread:
_state
<6>[ 9961.690865] [2: mSvcLEDThread:
ber, 1
<6>[ 9961.690879] [2: mSvcLEDThread:
ber, 1
<6>[ 9961.691385] [2: mSvcLEDThread:
_state, led_num = 1, brightness = 0
<6>[ 9961.691688] [2: mSvcLEDThread:
_state
<6>[ 9961.691707] [2: mSvcLEDThread:
ber, 2
<6>[ 9961.691722] [2: mSvcLEDThread:
ber, 2
<6>[ 9961.692018] [2: mSvcLEDThread:
_state, led_num = 2, brightness = 0
<6>[ 9961.692316] [2: mSvcLEDThread:
_state
<6>[ 9961.692331] [2: mSvcLEDThread:
ber, 3
<6>[ 9961.692345] [2: mSvcLEDThread:
ber, 3
<6>[ 9961.692723] [2: mSvcLEDThread:
_state, led_num = 3, brightness = 0
<6>[ 9961.693039] [2: mSvcLEDThread:
p
<6>[ 9961.693178] [2: mSvcLEDThread:
nk
<6>[ 9961.693312] [2: mSvcLEDThread:
_state
<6>[ 9961.693327] [2: mSvcLEDThread:
ber, 3
<6>[ 9961.693341] [2: mSvcLEDThread:
ber, 3
<6>[ 9961.693779] [2: mSvcLEDThread:
_state, led_num = 3, brightness = 50
<6>[ 9961.694391] [1: wpa_supplicant:
<6>[ 9961.694417] [1: wpa_supplicant:
<4>[ 9961.694432] [1: wpa_supplicant:
d setting
<4>[ 9961.694455] [1: wpa_supplicant:
<4>[ 9961.700270] [1: wpa_supplicant:
lue = 1
<6>[ 9961.704985] [0: wpa_supplicant:
<6>[ 9961.778966] [1:
Binder_1:
26, 0, 0, 0, 0, 0, 0, 0, 0
<6>[ 9961.779034] [1:
Binder_1:
, Sensor Type = 0x1a, data = 0
<6>[ 9961.853553] [2: irq/15-SSP_Int:

3354] MobiCore mcd: d01|FINGERPRINT comma


3354] MobiCore mcd: d01|do_extra_control
3354] MobiCore mcd: d01|Trustlet Fingerpr
5103] MobiCore mcd: closed by PID(5103),
4330] leds-max77843-rgb: store_max77843_r
4330] leds-max77843-rgb: max77843_rgb_set
4330] leds-max77843-rgb: max77843_rgb_num
4330] leds-max77843-rgb: max77843_rgb_num
4330] leds-max77843-rgb: max77843_rgb_set
4330] leds-max77843-rgb: max77843_rgb_set
4330] leds-max77843-rgb: max77843_rgb_num
4330] leds-max77843-rgb: max77843_rgb_num
4330] leds-max77843-rgb: max77843_rgb_set
4330] leds-max77843-rgb: max77843_rgb_set
4330] leds-max77843-rgb: max77843_rgb_num
4330] leds-max77843-rgb: max77843_rgb_num
4330] leds-max77843-rgb: max77843_rgb_set
4330] leds-max77843-rgb: max77843_rgb_ram
4330] leds-max77843-rgb: max77843_rgb_bli
4330] leds-max77843-rgb: max77843_rgb_set
4330] leds-max77843-rgb: max77843_rgb_num
4330] leds-max77843-rgb: max77843_rgb_num
4330] leds-max77843-rgb: max77843_rgb_set
5196] [dhd] dhd_suspend_resume_helper
5196] [dhd] dhd_set_suspend
5196] dhd_set_suspend: force extra Suspen
5196] dhd_prot_ioctl: SET PM to 1
5196] dhd_enable_packet_filter: enter, va
5196] [dhd] suspend bcn_li_dtim: 0
3442] [SSP] ssp_sensorhub_write(10): -78,
3442] [SSP] send_instruction: Inst = 0xb2
1775] [SSP] [M] OJH EL 0x0 0x0 0x0

<6>[ 9961.853553] [2: irq/15-SSP_Int: 1775]


<6>[ 9961.853553] [2: irq/15-SSP_Int: 1775]
<6>[ 9961.853553] [2: irq/15-SSP_Int: 1775]
<6>[ 9961.853553] [2: irq/15-SSP_Int: 1775]
<6>[ 9961.853553] [2: irq/15-SSP_Int: 1775]
<6>[ 9961.853553] [2: irq/15-SSP_Int: 1775]
<6>[ 9961.853553] [2: irq/15-SSP_Int: 1775]
<6>[ 9961.853553] [2: irq/15-SSP_Int: 1775]
<6>[ 9961.956003] [0: thread_hotplug:14070]
, exe_cmd 1
<6>[ 9961.956042] [0: thread_hotplug:14070]
dm_hotplug disable = 0
<6>[ 9961.956063] [0: thread_hotplug:14070]
<4>[ 9961.962473] [7:
migration/7: 43]
d
<4>[ 9961.962491] [7:
migration/7: 43]
<5>[ 9961.963988] [0: thread_hotplug:14070]
<4>[ 9961.967446] [6:
migration/6: 38]
<5>[ 9961.968045] [0: thread_hotplug:14070]
<4>[ 9961.972786] [5:
migration/5: 33]
<5>[ 9961.973381] [0: thread_hotplug:14070]
<4>[ 9961.976379] [4:
migration/4: 28]
<5>[ 9961.976957] [0: thread_hotplug:14070]
<4>[ 9961.980477] [3:
migration/3: 23]
<4>[ 9961.980630] [3:
migration/3: 23]
<5>[ 9961.982403] [0: thread_hotplug:14070]
<4>[ 9961.988562] [2:
migration/2: 18]
<4>[ 9961.988721] [2:
migration/2: 18]
<5>[ 9961.990455] [0: thread_hotplug:14070]
<6>[ 9962.004517] [0: thread_hotplug:14070]
0, active_cpu=0x00000001
<6>[ 9962.004653] [1:
mc_fastcall: 1747]
<4>[ 9962.005416] [1:
migration/1: 13]
<4>[ 9962.005568] [1:
migration/1: 13]
<5>[ 9962.008341] [0: thread_hotplug:14070]
<4>[ 9962.109804] [1:
swapper/1:
0]
<6>[ 9962.112862] [0: thread_hotplug:14070]
1, active_cpu=0x00000000
<6>[ 9962.113006] [0:
mc_fastcall: 1747]
<4>[ 9962.113837] [2:
swapper/2:
0]
<6>[ 9962.117100] [0: thread_hotplug:14070]
, exe_cmd 5
<6>[ 9962.117127] [0: thread_hotplug:14070]
dm_hotplug disable = 0
<6>[ 9962.117149] [0: thread_hotplug:14070]
<4>[ 9962.218634] [1: wpa_supplicant: 5196]
0
<4>[ 9962.218692] [1: wpa_supplicant: 5196]
lue = 0
<4>[ 9962.234339] [0: wpa_supplicant: 5196]
ove = 0, num = 2
<4>[ 9962.240858] [0: wpa_supplicant: 5196]
1
<4>[ 9962.240897] [0: wpa_supplicant: 5196]
lue = 1
<6>[ 9962.304494] [2:
Binder_4: 5158]
e = 8704, old_enable = 8705
<6>[ 9962.304526] [2:
Binder_4: 5158]
sor = 1, current state = 8704
<6>[ 9962.304547] [2:
Binder_4: 5158]

AT-ALLREMOVED
save bak odr 0, 1, 20, 20, 0
save bak odr 0, 0, 20, 20, 0
RM 0 4 1 3 60
SMR 3 1 0
RL3 0 0 8705 1441151885120634880
AT-RL 0 0 0 0,AT 0 0 0000 0000
RL26 0 0 8705 1441151885053526016
frequency info : 700000, prev_cmd 4
lcd is on : 0, low power mode = 0,
cluster1 cores hotplug out : 0
migrate_irqs: 3 callbacks suppresse
IRQ155 no longer
CPU7: shutdown
IRQ154 no longer
CPU6: shutdown
IRQ153 no longer
CPU5: shutdown
IRQ152 no longer
CPU4: shutdown
IRQ151 no longer
IRQ250 no longer
CPU3: shutdown
IRQ150 no longer
IRQ250 no longer
CPU2: shutdown
MobiCore mcd: <-

affine to CPU7
affine to CPU6
affine to CPU5
affine to CPU4
affine to CPU3
affine to CPU3
affine to CPU2
affine to CPU2
core_num=0x0000000

MobiCore mcd: CoreSwap ok 1 -> 0


IRQ149 no longer affine to CPU1
IRQ250 no longer affine to CPU1
CPU1: shutdown
CPU1: Booted secondary processor
MobiCore mcd: <- core_num=0x0000000
MobiCore mcd: CoreSwap ok 0 -> 1
CPU2: Booted secondary processor
frequency info : 700000, prev_cmd 1
lcd is on : 0, low power mode = 1,
cluster1 cores hotplug out : 0
net_os_enable_packet_filter: val =
dhd_enable_packet_filter: enter, va
net_os_rxfilter_add_remove: add_rem
net_os_enable_packet_filter: val =
dhd_enable_packet_filter: enter, va
[SSP] set_sensors_enable: new_enabl
[SSP] ssp_remove_sensor: remove sen
[SSP] send_instruction: Inst = 0xa2

, Sensor Type = 0x0, data = 200


<6>[ 9962.319254] [0: thread_hotplug:14070] frequency info : 1104000, prev_cmd
5, exe_cmd 4
<6>[ 9962.319281] [0: thread_hotplug:14070] lcd is on : 0, low power mode = 1,
dm_hotplug disable = 0
<6>[ 9962.319295] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<4>[ 9962.319635] [3:
swapper/3:
0] CPU3: Booted secondary processor
<6>[ 9962.323442] [0:
Binder_5: 5307] [SSP] set_sensors_enable: new_enabl
e = 8192, old_enable = 8704
<6>[ 9962.323471] [0:
Binder_5: 5307] [SSP] ssp_remove_sensor: remove sen
sor = 512, current state = 8192
<6>[ 9962.323491] [0:
Binder_5: 5307] [SSP] send_instruction: Inst = 0xa2
, Sensor Type = 0x9, data = 200
<6>[ 9962.372569] [2: kworker/u16:6:32449] [mhi_initiate_m3] Entered MHI state
4, Pending M0 0 Pending M3 0
<6>[ 9962.372602] [2: kworker/u16:6:32449] [mhi_initiate_m3] Triggering wake o
ut of M2
<6>[ 9962.374296] [2: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26dc0
<6>[ 9962.374327] [2: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9962.374375] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9962.374394] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9962.374410] [0:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9962.375067] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9962.375084] [2: kworker/u16:6:32449] [mhi_initiate_m3] Cancelled M1 time
r, timer was active
<6>[ 9962.375201] [2: kworker/u16:6:32449] [mhi_initiate_m3] Waiting for M3 co
mpletion.
<6>[ 9962.384431] [2: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9962.384491] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 5
<6>[ 9962.384509] [0:MHI_STATE_THREA: 4605] [process_M3_transition] Processing
M3 state transition
<6>[ 9962.384565] [2: kworker/u16:6:32449] [mhi_initiate_m3] M3 completion rec
eived
<6>[ 9962.384592] [2: kworker/u16:6:32449] [mhi_turn_off_pcie_link] Entered...
<6>[ 9962.396029] [2: kworker/u16:6:32449] mhi 0000:01:00.0: [debug] pmcsr reg
: b dev->current_state : 0
<6>[ 9962.396168] [2: kworker/u16:6:32449] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9962.396243] [2: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: ack mes
sage is ok
<6>[ 9962.396260] [2: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: receive
d Enter_L23_READY DLLP packet
<6>[ 9962.396282] [2: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[ 9962.396381] [2: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[ 9962.409670] [0:SSRM Handler Th: 9082] sec-battery battery.51: sec_bat_sto
re_attrs: siop level: 100
<6>[ 9962.409706] [0:SSRM Handler Th: 9082] bq51221_chg_set_property siop = 100
<6>[ 9962.409813] [0:
kworker/0:1:25228] sec_bat_siop_work : set current by
siop level(100)
<6>[ 9962.409834] [0:
kworker/0:1:25228] max77843_set_current: siop_level=10
0, afc_detec=0, current_max=460, current_now=0

<6>[ 9962.409848] [0:


kworker/0:1:25228] max77843_set_current: siop_level=10
0, afc_detec=0, current_max=460, current_now=0
<6>[ 9962.410058] [0:
kworker/0:1:25228] max77843_check_aicl_state aicl stat
e
<6>[ 9962.410378] [0:
kworker/0:1:25228] [max77843_set_charge_current] REG(0
xb9) DATA(0x80), CURRENT(0)
<7>[ 9962.412124] [0:
kworker/0:1:25228] max77843_set_buck : CHG_CNFG_00(0x1
4)
<6>[ 9962.412399] [0:
kworker/0:1:25228] [max77843_set_input_current] REG(0x
c0) DATA(0x17)
<7>[ 9962.412594] [0:
kworker/0:1:25228] MAX77843 addr : 0xb1 data : 0x1a
<7>[ 9962.412788] [0:
kworker/0:1:25228] MAX77843 addr : 0xb2 data : 0x9d
<7>[ 9962.412984] [0:
kworker/0:1:25228] MAX77843 addr : 0xb3 data : 0x00
<7>[ 9962.413181] [0:
kworker/0:1:25228] MAX77843 addr : 0xb4 data : 0x38
<7>[ 9962.413380] [0:
kworker/0:1:25228] MAX77843 addr : 0xb5 data : 0x00
<7>[ 9962.413576] [0:
kworker/0:1:25228] MAX77843 addr : 0xb6 data : 0xff
<7>[ 9962.413771] [0:
kworker/0:1:25228] MAX77843 addr : 0xb7 data : 0x14
<7>[ 9962.413965] [0:
kworker/0:1:25228] MAX77843 addr : 0xb8 data : 0x30
<7>[ 9962.414156] [0:
kworker/0:1:25228] MAX77843 addr : 0xb9 data : 0x80
<7>[ 9962.414344] [0:
kworker/0:1:25228] MAX77843 addr : 0xba data : 0x38
<7>[ 9962.414541] [0:
kworker/0:1:25228] MAX77843 addr : 0xbb data : 0x9d
<7>[ 9962.414735] [0:
kworker/0:1:25228] MAX77843 addr : 0xbc data : 0x96
<7>[ 9962.414930] [0:
kworker/0:1:25228] MAX77843 addr : 0xbd data : 0x0c
<7>[ 9962.415116] [0:
kworker/0:1:25228] MAX77843 addr : 0xbe data : 0x30
<7>[ 9962.415301] [0:
kworker/0:1:25228] MAX77843 addr : 0xbf data : 0xff
<7>[ 9962.415486] [0:
kworker/0:1:25228] MAX77843 addr : 0xc0 data : 0x0d
<7>[ 9962.415677] [0:
kworker/0:1:25228] MAX77843 addr : 0xc1 data : 0x17
<7>[ 9962.415909] [0:
kworker/0:1:25228] MAX77843 addr : 0xc2 data : 0x00
<7>[ 9962.416110] [0:
kworker/0:1:25228] MAX77843 addr : 0xc3 data : 0x67
<6>[ 9962.442347] [2: kworker/u16:6:32449] [mhi_turn_off_pcie_link] Exited...
<6>[ 9962.443365] [3:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 95 19 43 00 00 00
<6>[ 9962.443429] [3:
qmuxd: 3399] [mhi_wake_dev_from_m3] Initiating M
0 work...
<3>[ 9962.449100] [0:
hci_thread: 6674] [BT] set_wake_locked value = 1
<6>[ 9962.449303] [2: kworker/u16:6:32449] [m0_work] No pending resume, initia
ting M0.
<6>[ 9962.449329] [2: kworker/u16:6:32449] [mhi_initiate_m0] Entered MHI state
5, Pending M0 0 Pending M3 0
<6>[ 9962.449344] [2: kworker/u16:6:32449] [mhi_initiate_m0] Waiting for M0 M1
or M3. Currently 5...
<6>[ 9962.449358] [2: kworker/u16:6:32449] [mhi_initiate_m0] Wait complete sta
te: 5
<6>[ 9962.449372] [2: kworker/u16:6:32449] [mhi_turn_on_pcie_link] Entered...
<6>[ 9962.449393] [2: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, start of poweron, pcie state: 0
<6>[ 9962.491190] [2: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: D state
: 0, bcfd00
<6>[ 9962.510650] [2: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: exynos_
pcie_reset: Link up : 0x038cee11
<6>[ 9962.511008] [2: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, end of poweron, pcie state: 3
<6>[ 9962.522807] [2: kworker/u16:6:32449] mhi 0000:01:00.0: [debug] pmcsr reg
: 8 dev->current_state : 3
<6>[ 9962.522984] [2: kworker/u16:6:32449] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9962.523001] [2: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: Recover
y for the link of RC0
<6>[ 9962.523014] [2: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: Recover
config space of RC0 and its EP

<6>[ 9962.523026] [2: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: Recover


RC0
<6>[ 9962.523065] [2: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: Recover
EP of RC0
<6>[ 9962.523441] [2: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: Refresh
ing the saved config space in PCI framework for RC0 and its EP
<6>[ 9962.531512] [2: kworker/u16:6:32449] [mhi_turn_on_pcie_link] Exited...
<6>[ 9962.531540] [2: kworker/u16:6:32449] [mhi_initiate_m0] Setting M0 ...
<6>[ 9962.531651] [2: kworker/u16:6:32449] [mhi_initiate_m0] Exited...
<6>[ 9962.533450] [2: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 5 link 1, ring type 2, index 0 db 0x5fa26de0
<6>[ 9962.533476] [2: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9962.533528] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9962.533541] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9962.533555] [2:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9962.534214] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9962.545376] [2:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 9f
00 80 03 01 02 95 19 43 00 93 00 02 04 00
<6>[ 9962.619477] [0: thread_hotplug:14070] frequency info : 1500000, prev_cmd
4, exe_cmd 0
<6>[ 9962.619500] [0: thread_hotplug:14070] lcd is on : 0, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9962.619510] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<4>[ 9962.619908] [4:
swapper/4:
0] CPU4: Booted secondary processor
<4>[ 9962.626345] [5:
swapper/5:
0] CPU5: Booted secondary processor
<4>[ 9962.627662] [6:
swapper/6:
0] CPU6: Booted secondary processor
<4>[ 9962.628761] [7:
swapper/7:
0] CPU7: Booted secondary processor
<6>[ 9962.729308] [0: thread_hotplug:14070] frequency info : 900000, prev_cmd 0
, exe_cmd 4
<6>[ 9962.729339] [0: thread_hotplug:14070] lcd is on : 0, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9962.729356] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<6>[ 9962.754374] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9962.754524] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[ 9962.754547] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[ 9962.754576] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9962.754776] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[ 9963.028848] I[0:
swapper/0:
0] [BT] update_host_wake_locked host_w
ake is deasserted. release wakelock in 1s
<6>[ 9963.332625] [0: thread_hotplug:14070] frequency info : 900000, prev_cmd 4
, exe_cmd 1
<6>[ 9963.332656] [0: thread_hotplug:14070] lcd is on : 0, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9963.332673] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<5>[ 9963.338933] [0: thread_hotplug:14070] CPU7: shutdown
<5>[ 9963.342704] [0: thread_hotplug:14070] CPU6: shutdown
<5>[ 9963.345651] [0: thread_hotplug:14070] CPU5: shutdown
<5>[ 9963.348261] [0: thread_hotplug:14070] CPU4: shutdown
<5>[ 9963.353622] [0: thread_hotplug:14070] CPU3: shutdown
<6>[ 9963.455946] [0: thread_hotplug:14070] frequency info : 600000, prev_cmd 1
, exe_cmd 5
<6>[ 9963.455996] [0: thread_hotplug:14070] lcd is on : 0, low power mode = 1,

dm_hotplug disable = 0
<6>[ 9963.456022] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<5>[ 9963.561021] [0: thread_hotplug:14070] CPU2: shutdown
<6>[ 9963.565203] [0: thread_hotplug:14070] MobiCore mcd: <- core_num=0x0000000
0, active_cpu=0x00000001
<6>[ 9963.565505] [1:
mc_fastcall: 1747] MobiCore mcd: CoreSwap ok 1 -> 0
<5>[ 9963.569752] [0: thread_hotplug:14070] CPU1: shutdown
<6>[ 9963.572837] [0: thread_hotplug:14070] frequency info : 400000, prev_cmd 5
, exe_cmd 1
<6>[ 9963.572897] [0: thread_hotplug:14070] lcd is on : 0, low power mode = 1,
dm_hotplug disable = 0
<6>[ 9963.572935] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<3>[ 9963.728352] I[0:pool-7-thread-2:16741] [BT] set_wake_locked value = 0
<6>[ 9963.755923] [0: kworker/u16:6:32449] [mhi_initiate_m3] Entered MHI state
4, Pending M0 0 Pending M3 0
<6>[ 9963.755971] [0: kworker/u16:6:32449] [mhi_initiate_m3] Triggering wake o
ut of M2
<6>[ 9963.766812] [0: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26e20
<6>[ 9963.766856] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9963.766907] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9963.766928] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9963.766951] [0:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9963.767546] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9963.767580] [0: kworker/u16:6:32449] [mhi_initiate_m3] Cancelled M1 time
r, timer was active
<6>[ 9963.767712] [0: kworker/u16:6:32449] [mhi_initiate_m3] Waiting for M3 co
mpletion.
<6>[ 9963.772574] [0: thread_hotplug:14070] frequency info : 1000000, prev_cmd
1, exe_cmd 4
<6>[ 9963.772604] [0: thread_hotplug:14070] lcd is on : 0, low power mode = 1,
dm_hotplug disable = 0
<6>[ 9963.772619] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<4>[ 9963.773114] [1:
swapper/1:
0] CPU1: Booted secondary processor
<6>[ 9963.774085] [0: thread_hotplug:14070] MobiCore mcd: <- core_num=0x0000000
1, active_cpu=0x00000000
<6>[ 9963.774205] [0:
mc_fastcall: 1747] MobiCore mcd: CoreSwap ok 0 -> 1
<4>[ 9963.774705] [2:
swapper/2:
0] CPU2: Booted secondary processor
<4>[ 9963.776353] [3:
swapper/3:
0] CPU3: Booted secondary processor
<6>[ 9963.776992] [2: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9963.777134] [3:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 5
<6>[ 9963.777157] [3:MHI_STATE_THREA: 4605] [process_M3_transition] Processing
M3 state transition
<6>[ 9963.777284] [2: kworker/u16:6:32449] [mhi_initiate_m3] M3 completion rec
eived
<6>[ 9963.777317] [2: kworker/u16:6:32449] [mhi_turn_off_pcie_link] Entered...
<6>[ 9963.789486] [2: kworker/u16:6:32449] mhi 0000:01:00.0: [debug] pmcsr reg
: b dev->current_state : 0
<6>[ 9963.789637] [2: kworker/u16:6:32449] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9963.789719] [2: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: ack mes
sage is ok
<6>[ 9963.789740] [2: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: receive
d Enter_L23_READY DLLP packet
<6>[ 9963.789765] [2: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: exynos_

pcie_poweroff, start of poweroff, pcie state: 2


<6>[ 9963.789880] [2: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[ 9963.819863] [2: kworker/u16:6:32449] [mhi_turn_off_pcie_link] Exited...
<6>[ 9964.076054] [0: thread_hotplug:14070] frequency info : 400000, prev_cmd 4
, exe_cmd 1
<6>[ 9964.076119] [0: thread_hotplug:14070] lcd is on : 0, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9964.076157] [0: thread_hotplug:14070] cluster1 cores hotplug out : 0
<5>[ 9964.081584] [0: thread_hotplug:14070] CPU3: shutdown
<5>[ 9964.088731] [0: thread_hotplug:14070] CPU2: shutdown
<6>[ 9964.091430] [0: thread_hotplug:14070] MobiCore mcd: <- core_num=0x0000000
0, active_cpu=0x00000001
<6>[ 9964.091602] [1:
mc_fastcall: 1747] MobiCore mcd: CoreSwap ok 1 -> 0
<5>[ 9964.095383] [0: thread_hotplug:14070] CPU1: shutdown
<6>[ 9964.227233] [0: system_server: 4318] PM: suspend entry 2016-11-17 16:18:
40.396464727 UTC
<6>[ 9964.227294] [0: system_server: 4318] PM: Syncing filesystems ... done.
<7>[ 9964.246651] [0: system_server: 4318] PM: Preparing system for mem sleep
<6>[ 9964.246844] [0: system_server: 4318] exynos_dm_hotplug_notifier, 958 : d
ynamic_hotplug CMD_SLEEP_PREPARE
<6>[ 9964.246893] [0: system_server: 4318] nr_sleep_prepare_cpus : 4, tmp_nr_s
leep_prepare_cpus : 5
<4>[ 9964.247713] [1:
swapper/1:
0] CPU1: Booted secondary processor
<6>[ 9964.250096] [0: system_server: 4318] MobiCore mcd: <- core_num=0x0000000
1, active_cpu=0x00000000
<6>[ 9964.250274] [0:
mc_fastcall: 1747] MobiCore mcd: CoreSwap ok 0 -> 1
<4>[ 9964.251138] [2:
swapper/2:
0] CPU2: Booted secondary processor
<4>[ 9964.254049] [3:
swapper/3:
0] CPU3: Booted secondary processor
<4>[ 9964.257279] [4:
swapper/4:
0] CPU4: Booted secondary processor
<6>[ 9964.260795] [0: thread_hotplug:14070] stopped thread_hotplug
<6>[ 9964.310532] [0: system_server: 4318] MIF(635000): set TMU_COLD: 637500 =
> (set_volt: 675000, get_volt: 675000)
<6>[ 9964.311765] [0: system_server: 4318] DISP(100000): set TMU_COLD: 650000
=> (set_volt: 687500, get_volt: 687500)
<6>[ 9964.312679] [0: system_server: 4318] INT(100000): set TMU_COLD: 650000 =
> 687500
<6>[ 9964.312710] [0: system_server: 4318] tmu temperature state 0 to 1
<6>[ 9964.312727] [0: system_server: 4318] gpu temperature state 0 to 1
<6>[ 9964.312763] [0: system_server: 4318] mdm_hsic_pm_notify_event: block req
uest
<3>[ 9964.314299] [2:
mdm_helper: 3355] esoc REQ engine released from wait
<4>[ 9964.313791] [0: system_server: 4318] Freezing user space processes ...
<6>[ 9964.316527] [0: system_server: 4318] last active wakeup source: eventpol
l
<4>[ 9964.316557] [0: system_server: 4318]
<3>[ 9964.316574] [0: system_server: 4318] Freezing of tasks aborted after 0.0
02 seconds
<4>[ 9964.316590] [0: system_server: 4318] Restarting tasks ... done.
<3>[ 9964.319811] [2:
mdm_helper: 3355] esoc REQ enginer waiting on request
<6>[ 9964.322054] [3:onic.tuiservice: 659] t-base-tui module: ioctl 0x80047402
<6>[ 9964.322084]
<6>[ 9964.323620]
, exe_cmd 4
<6>[ 9964.323651]
dm_hotplug disable
<6>[ 9964.323668]
<6>[ 9964.327139]
equest

[3:onic.tuiservice: 659] TUI_IO_WAITCMD


[0: thread_hotplug:17960] frequency info : 900000, prev_cmd 1
[0: thread_hotplug:17960] lcd is on : 0, low power mode = 1,
= 0
[0: thread_hotplug:17960] cluster1 cores hotplug out : 0
[0: system_server: 4318] mdm_hsic_pm_notify_event: unblock r

<6>[ 9964.327173] [0: system_server: 4318]


<6>[ 9964.327273] [2: system_server: 4318]
0.496529696 UTC
<6>[ 9964.346095] [3: kworker/u16:15:32536]
<7>[ 9964.346146] [3: kworker/u16:15:32536]
time_resume
<6>[ 9964.346165] [3: kworker/u16:15:32536]
<7>[ 9964.346191] [3: kworker/u16:15:32536]
amsung_usb2phy_runtime_resume
<6>[ 9964.346242] [3: kworker/u16:15:32536]
hild=0
<7>[ 9964.346269] [3: kworker/u16:15:32536]
<7>[ 9964.346292] [3: kworker/u16:15:32536]
hub
<7>[ 9964.346315] [3: kworker/u16:15:32536]
<7>[ 9964.369354] [3: kworker/u16:15:32536]
<7>[ 9964.369422] [3: kworker/u16:15:32536]
ange 0000
<7>[ 9964.369491] [3: kworker/u16:15:32536]
<7>[ 9964.369592] [0:
khubd: 742]
00 evt 0000
<6>[ 9964.372425] [3: kworker/u16:15:32536]
<6>[ 9964.372599] [3: kworker/u16:15:32536]
<6>[ 9964.753010] [1:
kworker/1:4:14113]
=> (set_volt: 575000, get_volt: 575000)
<6>[ 9964.755006] [1:
kworker/1:4:14113]
volt: 650000, get_volt: 650000)
<6>[ 9964.756088] [1:
kworker/1:4:14113]
=> 650000
<6>[ 9964.756134] [1:
kworker/1:4:14113]
emp : 36
<7>[ 9964.882633] [0:
kworker/0:1:25228]
<7>[ 9964.896001] [0:
kworker/0:1:25228]
<7>[ 9964.896092] [0:
kworker/0:1:25228]
1
<7>[ 9964.896143] [0:
kworker/0:1:25228]
hub
<3>[ 9964.896921] [0:
kworker/0:1:25228]
time_suspend
<7>[ 9964.909312] [0:
kworker/0:1:25228]
amsung_usb2phy_runtime_suspend
<6>[ 9964.909399] [0:
kworker/0:1:25228]
<6>[ 9964.909470] [0:
kworker/0:1:25228]
child=0
<6>[ 9964.909871] [2: system_server: 4318]
41.079116296 UTC
<6>[ 9964.909914] [2: system_server: 4318]
<7>[ 9964.922694] [2: system_server: 4318]
<6>[ 9964.923034] [3: system_server: 4318]
ynamic_hotplug CMD_SLEEP_PREPARE
<6>[ 9964.923087] [3: system_server: 4318]
leep_prepare_cpus : 5
<6>[ 9964.923276] [0: thread_hotplug:17960]
<6>[ 9964.933762] [0: system_server: 4318]
> (set_volt: 612500, get_volt: 612500)
<6>[ 9964.934810] [0: system_server: 4318]
=> (set_volt: 687500, get_volt: 687500)
<6>[ 9964.935935] [0: system_server: 4318]
> 687500
<6>[ 9964.935982] [0: system_server: 4318]

request_active_lock_set
PM: suspend exit 2016-11-17 16:18:4
mdm_hsic_rpm_check
s5p-ehci 15510000.usb: s5p_ehci_run
request_active_lock_set
samsung-usb2phy 15530000.usb2phy: s
s5p_ehci_runtime_resume: usage=1, c
usb usb1: usb auto-resume
s5p-ehci 15510000.usb: resume root
s5p-ehci 15510000.usb: LRESET 0
hub 1-0:1.0: hub_resume
hub 1-0:1.0: port 2: status 0503 ch
usb 1-2: finish resume
hub 1-0:1.0: state 7 ports 2 chg 00
[CHKRA:5]>
mdm_hsic_rpm_restart
MIF(418000): unset TMU_COLD: 612500
DISP(100000): unset TMU_COLD: (set_
INT(100000): unset TMU_COLD: 687500
tmu temperature state 1 to 0, cur_t
usb 1-2: usb auto-suspend, wakeup 1
hub 1-0:1.0: hub_suspend
usb usb1: bus auto-suspend, wakeup
s5p-ehci 15510000.usb: suspend root
s5p-ehci 15510000.usb: s5p_ehci_run
samsung-usb2phy 15530000.usb2phy: s
request_active_lock_release
s5p_ehci_runtime_suspend: usage=0,
PM: suspend entry 2016-11-17 16:18:
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
exynos_dm_hotplug_notifier, 958 : d
nr_sleep_prepare_cpus : 4, tmp_nr_s
stopped thread_hotplug
MIF(418000): set TMU_COLD: 575000 =
DISP(100000): set TMU_COLD: 650000
INT(100000): set TMU_COLD: 650000 =
tmu temperature state 0 to 1

<6>[ 9964.936034] [0: system_server: 4318]


uest
<3>[ 9964.937368] [2:
mdm_helper: 3355]
<4>[ 9964.936768] [0: system_server: 4318]
elapsed 0.009 seconds) done.
<4>[ 9964.946109] [0: system_server: 4318]
... (elapsed 0.009 seconds) done.
<7>[ 9964.955583] [0: system_server: 4318]
<4>[ 9964.955624] [0: system_server: 4318]
le_suspend to debug)
<6>[ 9964.957828] [0: system_server: 4318]
os_runtime_resume
<6>[ 9964.960454] [3: kworker/u16:17:32538]
<6>[ 9964.960506] [3: kworker/u16:17:32538]
MHI state 5
<4>[ 9964.960531] [0: system_server: 4318]
0x00000001
<6>[ 9964.960560] [3: kworker/u16:17:32538]
5, Pending M0 0 Pending M3 0
<6>[ 9964.960595] [3: kworker/u16:17:32538]
state 0.
<4>[ 9964.964881] [0: system_server: 4318]
_D3_INFORM to dongle
<4>[ 9964.967066] I[0:
swapper/0:
0]
<4>[ 9964.967103] I[0:
swapper/0:
0]
Received D3 ACK
<4>[ 9964.967519] [0: system_server: 4318]
0x00000008
<4>[ 9964.967885] [0: system_server: 4318]
_D0_INFORM_IN_USE to dongle
<4>[ 9964.968253] [0: system_server: 4318]
<6>[ 9964.968685] [0: system_server: 4318]
43e914e4
<6>[ 9964.968878] [0: system_server: 4318]
100146
<6>[ 9964.969084] [0: system_server: 4318]
2800003
<6>[ 9964.969334] [0: system_server: 4318]
10
<6>[ 9964.969496] [0: system_server: 4318]
1c200004
<6>[ 9964.969701] [0: system_server: 4318]
0
<6>[ 9964.969906] [0: system_server: 4318]
1c400004
<6>[ 9964.970111] [0: system_server: 4318]
0
<6>[ 9964.970318] [0: system_server: 4318]
0
<6>[ 9964.970524] [0: system_server: 4318]
0
<6>[ 9964.970730] [0: system_server: 4318]
0
<6>[ 9964.970936] [0: system_server: 4318]
77414e4
<6>[ 9964.971143] [0: system_server: 4318]
0
<6>[ 9964.971348] [0: system_server: 4318]
48
<6>[ 9964.971555] [0: system_server: 4318]

mdm_hsic_pm_notify_event: block req


esoc REQ engine released from wait
Freezing user space processes ... (
Freezing remaining freezable tasks
PM: Entering mem sleep
Suspending console(s) (use no_conso
exynos-dwc3 15400000.usb: dwc3_exyn
[mhi_suspend] [mhi_suspend]
[mhi_suspend] Entered, sys state 2,
dhdpcie_send_mb_data: H2D_MB_DATA:
[mhi_initiate_m3] Entered MHI state
[mhi_initiate_m3] MHI state 5, link
dhdpcie_send_mb_data: send H2D_HOST
D2H_MB_DATA: 0x00000001
dhdpcie_handle_mb_data D2H_MB_DATA:
dhdpcie_send_mb_data: H2D_MB_DATA:
dhdpcie_send_mb_data: send H2D_HOST
dhdpcie_suspend_dev: Enter
pcieh 0001:01:00.0: reg offset: 0:
pcieh 0001:01:00.0: reg offset: 4:
pcieh 0001:01:00.0: reg offset: 8:
pcieh 0001:01:00.0: reg offset: 12:
pcieh 0001:01:00.0: reg offset: 16:
pcieh 0001:01:00.0: reg offset: 20:
pcieh 0001:01:00.0: reg offset: 24:
pcieh 0001:01:00.0: reg offset: 28:
pcieh 0001:01:00.0: reg offset: 32:
pcieh 0001:01:00.0: reg offset: 36:
pcieh 0001:01:00.0: reg offset: 40:
pcieh 0001:01:00.0: reg offset: 44:
pcieh 0001:01:00.0: reg offset: 48:
pcieh 0001:01:00.0: reg offset: 52:
pcieh 0001:01:00.0: reg offset: 56:

0
<6>[ 9964.971762] [0: system_server:
1ed
<6>[ 9964.971969] [0: system_server:
2c10
<6>[ 9964.972176] [0: system_server:
142
<6>[ 9964.972205] [0: system_server:
0
<6>[ 9964.972231] [0: system_server:
0
<6>[ 9964.972384] [0: system_server:
: 400
<6>[ 9964.972643] [0: system_server:
: 1
<6>[ 9964.972672] [0: system_server:
: 0
<6>[ 9964.975272] [0: system_server:
device_vendor_id reg : 43e914e4
<6>[ 9964.975473] [0: system_server:
PMCSR reg value: 4108
<6>[ 9964.975680] [0: system_server:
PMCSR reg value: 410b
<6>[ 9964.975967] [0: system_server:
device_vendor_id reg : 43e914e4
<6>[ 9964.989573] [0: system_server:
eg : 410b dev->current_state : 0
<6>[ 9964.989747] [0: system_server:
vendor_id reg : 43e914e4
<6>[ 9964.989808] [0: system_server:
0: a575144d
<6>[ 9964.989843] [0: system_server:
4: 100147
<6>[ 9964.989878] [0: system_server:
8: 6040001
<6>[ 9964.990043] [0: system_server:
12: 10010
<6>[ 9964.990077] [0: system_server:
16: 0
<6>[ 9964.990112] [0: system_server:
20: 0
<6>[ 9964.990148] [0: system_server:
24: 10100
<6>[ 9964.990182] [0: system_server:
28: 0
<6>[ 9964.990218] [0: system_server:
32: 1ff01c00
<6>[ 9964.990382] [0: system_server:
36: 0
<6>[ 9964.990417] [0: system_server:
40: 0
<6>[ 9964.990452] [0: system_server:
44: 0
<6>[ 9964.990485] [0: system_server:
48: 0
<6>[ 9964.990520] [0: system_server:
52: 40
<6>[ 9964.990555] [0: system_server:
56: 0
<6>[ 9964.990722] [0: system_server:

4318] pcieh 0001:01:00.0: reg offset: 60:


4318] pcieh 0001:01:00.0: PCI_EXP_DEVCTL:
4318] pcieh 0001:01:00.0: PCI_EXP_LNKCTL:
4318] pcieh 0001:01:00.0: PCI_EXP_SLTCTL:
4318] pcieh 0001:01:00.0: PCI_EXP_RTCTL:
4318] pcieh 0001:01:00.0: PCI_EXP_DEVCTL2
4318] pcieh 0001:01:00.0: PCI_EXP_LNKCTL2
4318] pcieh 0001:01:00.0: PCI_EXP_SLTCTL2
4318] pcieh 0001:01:00.0: [debug] step 1,
4318] pcieh 0001:01:00.0: [debug] step 2,
4318] pcieh 0001:01:00.0: [debug] step 3,
4318] pcieh 0001:01:00.0: [debug] step 4,
4318] pcieh 0001:01:00.0: [debug] pmcsr r
4318] pcieh 0001:01:00.0: [debug] device_
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:

60: 101ed
<6>[ 9964.990757] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL: 2010
<6>[ 9964.990792] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL: 42
<6>[ 9964.990819] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL: 0
<6>[ 9964.990852] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_RTCT
L: 0
<6>[ 9964.990885] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL2: 400
<6>[ 9964.990919] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL2: 1
<6>[ 9964.990947] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL2: 0
<6>[ 9964.991119] [0: system_server: 4318] exynos-pcie 15660000.pcie1: ack mes
sage is ok
<6>[ 9964.991149] [0: system_server: 4318] exynos-pcie 15660000.pcie1: receive
d Enter_L23_READY DLLP packet
<6>[ 9964.991188] [0: system_server: 4318] exynos-pcie 15660000.pcie1: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[ 9964.991350] [0: system_server: 4318] exynos-pcie 15660000.pcie1: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[ 9964.996371] [0: system_server: 4318] voltage(793750) + volt_offset(37500
) is bigger than max_volt(793750)
<6>[ 9964.996427] [0: system_server: 4318] voltage(793750) + volt_offset(37500
) is bigger than max_volt(793750)
<6>[ 9964.997638] [0: system_server: 4318] DEVFREQ(MIF): suspend voltage(79375
0 793750)
<6>[ 9965.000394] [0: system_server: 4318] s2m_rtc_update: RTC_UPDATE_REGISTER
check : 0x00
<6>[ 9965.000606] [0: system_server: 4318] s2m-rtc s2m-rtc: s2m_rtc_read_time:
2016-11-17 16:18:40(0x10)PM
<5>[ 9965.001013] [0: system_server: 4318] sd 0:0:0:0: [sda] Synchronizing SCS
I cache
<3>[ 9965.005249] [0: system_server: 4318] dpm_run_callback(): platform_pm_sus
pend+0x0/0x4c returns -16
<3>[ 9965.005285] [0: system_server: 4318] PM: Device alarmtimer failed to sus
pend: error -16
<3>[ 9965.005310] [0: system_server: 4318] PM: Some devices failed to suspend
<7>[ 9965.005576] [2: kworker/u16:6:32449] usb usb1: usb resume
<7>[ 9965.005615] [2: kworker/u16:6:32449] s5p-ehci 15510000.usb: s5p_ehci_run
time_resume
<6>[ 9965.005639] [2: kworker/u16:6:32449] request_active_lock_set
<7>[ 9965.005675] [2: kworker/u16:6:32449] samsung-usb2phy 15530000.usb2phy: s
amsung_usb2phy_runtime_resume
<6>[ 9965.005726] [2: kworker/u16:6:32449] s5p_ehci_runtime_resume: usage=1, c
hild=0
<7>[ 9965.005757] [2: kworker/u16:6:32449] s5p-ehci 15510000.usb: resume root
hub
<7>[ 9965.005786] [2: kworker/u16:6:32449] s5p-ehci 15510000.usb: LRESET 0
<6>[ 9965.007844] [0: system_server: 4318] s2m_rtc_update: RTC_UPDATE_REGISTER
check : 0x00
<6>[ 9965.008053] [0: system_server: 4318] s2m-rtc s2m-rtc: s2m_rtc_read_time:
2016-11-17 16:18:40(0x10)PM
<6>[ 9965.013962] [0: system_server: 4318] pcieh 0001:01:00.0: [debug] setp 5,
PMCSR reg value: ffff
<6>[ 9965.014009] [0: system_server: 4318] pcieh 0001:01:00.0: [debug] step 1,
device_vendor_id reg : ffffffff
<6>[ 9965.014038] [0: system_server: 4318] pcieh 0001:01:00.0: [debug] step 2,

PMCSR reg value: ffff


<6>[ 9965.014072] [0: system_server: 4318] pcieh 0001:01:00.0: [debug] step 3,
PMCSR reg value: 0
<6>[ 9965.014102] [0: system_server: 4318] pcieh 0001:01:00.0: [debug] step 4,
device_vendor_id reg : ffffffff
<6>[ 9965.015907] [1: kworker/u16:15:32536] mhi 0000:01:00.0: [debug] pmcsr reg
: ffff dev->current_state : 3
<6>[ 9965.015942] [1: kworker/u16:15:32536] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : ffffffff
<6>[ 9965.015976] [1: kworker/u16:15:32536] mhi 0000:01:00.0: Refused to change
power state, currently in D3, PCI_PM_CTRL=ffff
<6>[ 9965.016044] [1: kworker/u16:15:32536] [mhi_resume] [mhi_resume]
<6>[ 9965.016087] [1: kworker/u16:15:32536] [mhi_initiate_m0] Entered MHI state
5, Pending M0 0 Pending M3 0
<6>[ 9965.016119] [1: kworker/u16:15:32536] [mhi_initiate_m0] Waiting for M0 M1
or M3. Currently 5...
<6>[ 9965.016151] [1: kworker/u16:15:32536] [mhi_initiate_m0] Wait complete sta
te: 5
<6>[ 9965.016180] [1: kworker/u16:15:32536] [mhi_turn_on_pcie_link] Entered...
<6>[ 9965.016220] [1: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, start of poweron, pcie state: 0
<6>[ 9965.025886] [0: system_server: 4318] pcieh 0001:01:00.0: [debug] pmcsr r
eg : ffff dev->current_state : 3
<6>[ 9965.025918] [0: system_server: 4318] pcieh 0001:01:00.0: [debug] device_
vendor_id reg : ffffffff
<6>[ 9965.025949] [0: system_server: 4318] pcieh 0001:01:00.0: Refused to chan
ge power state, currently in D3, PCI_PM_CTRL=ffff
<6>[ 9965.025982] [0: system_server: 4318] exynos-pcie 15660000.pcie1: PCIE li
nk state is 0
<6>[ 9965.026013] [0: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_DEVCTL:
2c10
<6>[ 9965.026043] [0: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_LNKCTL:
142
<6>[ 9965.026069] [0: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_SLTCTL:
0
<6>[ 9965.026097] [0: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_RTCTL:
0
<6>[ 9965.026126] [0: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_DEVCTL2
: 400
<6>[ 9965.026154] [0: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_LNKCTL2
: 1
<6>[ 9965.026182] [0: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_SLTCTL2
: 0
<6>[ 9965.026214] [0: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x3c (was 0xffffffff, writing 0x1ed)
<6>[ 9965.026247] [0: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x38 (was 0xffffffff, writing 0x0)
<6>[ 9965.026280] [0: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x34 (was 0xffffffff, writing 0x48)
<6>[ 9965.026312] [0: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x30 (was 0xffffffff, writing 0x0)
<6>[ 9965.026345] [0: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x2c (was 0xffffffff, writing 0x77414e4)
<6>[ 9965.026376] [0: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x28 (was 0xffffffff, writing 0x0)
<6>[ 9965.026408] [0: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x24 (was 0xffffffff, writing 0x0)
<7>[ 9965.029250] [2: kworker/u16:6:32449] hub 1-0:1.0: hub_resume
<7>[ 9965.029340] [2: kworker/u16:6:32449] hub 1-0:1.0: port 2: status 0503 ch
ange 0000

<7>[ 9965.029520] [3: kworker/u16:20:32543] usb 1-2: finish resume


<6>[ 9965.032562] [3: kworker/u16:20:32543] [CHKRA:5]>
<6>[ 9965.056356] [1: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: D state
: 0, d23900
<6>[ 9965.056423] [0: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x20 (was 0xffffffff, writing 0x0)
<6>[ 9965.072103] [1: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: exynos_
pcie_reset: Link up : 0x03976a11
<6>[ 9965.072609] [1: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, end of poweron, pcie state: 3
<6>[ 9965.086092] [1: kworker/u16:15:32536] mhi 0000:01:00.0: [debug] pmcsr reg
: 8 dev->current_state : 3
<6>[ 9965.086284] [1: kworker/u16:15:32536] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9965.086318] [1: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: Recover
y for the link of RC0
<6>[ 9965.086347] [1: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: Recover
config space of RC0 and its EP
<6>[ 9965.086376] [1: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: Recover
RC0
<6>[ 9965.086430] [0: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x1c (was 0xffffffff, writing 0x0)
<6>[ 9965.086456] [1: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: Recover
EP of RC0
<6>[ 9965.086922] [1: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: Refresh
ing the saved config space in PCI framework for RC0 and its EP
<6>[ 9965.092256] [1: kworker/u16:15:32536] [mhi_turn_on_pcie_link] Exited...
<6>[ 9965.092293] [1: kworker/u16:15:32536] [mhi_initiate_m0] Setting M0 ...
<6>[ 9965.092404] [1: kworker/u16:15:32536] [mhi_initiate_m0] Exited...
<6>[ 9965.094679] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 5 link 1, ring type 2, index 0 db 0x5fa26e40
<6>[ 9965.094723] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9965.094808] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9965.094840] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9965.094869] [1:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9965.098686] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9965.098714] [2: kworker/u16:15:32536] [mhi_resume] Wait complete state: 2
<6>[ 9965.116710] [0: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x18 (was 0xffffffff, writing 0x1c400004)
<6>[ 9965.146715] [0: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x14 (was 0xffffffff, writing 0x0)
<6>[ 9965.176720] [0: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x10 (was 0xffffffff, writing 0x1c200004)
<6>[ 9965.206725] [0: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0xc (was 0xffffffff, writing 0x10)
<6>[ 9965.206760] [0: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x8 (was 0xffffffff, writing 0x2800003)
<6>[ 9965.206794] [0: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x4 (was 0xffffffff, writing 0x100146)
<6>[ 9965.206827] [0: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x0 (was 0xffffffff, writing 0x43e914e4)
<6>[ 9965.206881] [0: system_server: 4318] exynos-pcie 15660000.pcie1: exynos_
pcie_poweron, start of poweron, pcie state: 0
<6>[ 9965.227788] [0: system_server: 4318] exynos-pcie 15660000.pcie1: D state
: 0, 25b200
<6>[ 9965.229105] [0: system_server: 4318] exynos-pcie 15660000.pcie1: exynos_
pcie_reset: Link up : 0x0389ff11

<6>[ 9965.229343] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC


TL: 2010
<6>[ 9965.229509] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL: 42
<6>[ 9965.229537] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL: 0
<6>[ 9965.229570] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_RTCT
L: 0
<6>[ 9965.229606] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL2: 400
<6>[ 9965.229640] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL2: 1
<6>[ 9965.229668] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL2: 0
<6>[ 9965.229706] [0: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x3c (was 0x1ff, writing 0x101ed)
<6>[ 9965.229750] [0: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x38 (was 0x0, writing 0x0)
<6>[ 9965.229789] [0: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x34 (was 0x40, writing 0x40)
<6>[ 9965.229954] [0: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x30 (was 0x0, writing 0x0)
<6>[ 9965.229992] [0: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x2c (was 0x0, writing 0x0)
<6>[ 9965.230030] [0: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x28 (was 0x0, writing 0x0)
<6>[ 9965.230067] [0: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x24 (was 0x0, writing 0x0)
<6>[ 9965.230106] [0: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x20 (was 0x1ff01c00, writing 0x1ff01c00)
<6>[ 9965.230143] [0: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x1c (was 0x0, writing 0x0)
<6>[ 9965.230181] [0: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x18 (was 0x10100, writing 0x10100)
<6>[ 9965.230349] [0: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x14 (was 0x0, writing 0x0)
<6>[ 9965.230386] [0: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x10 (was 0x0, writing 0x0)
<6>[ 9965.230424] [0: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0xc (was 0x10000, writing 0x10010)
<6>[ 9965.230468] [0: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x8 (was 0x1, writing 0x6040001)
<6>[ 9965.230513] [0: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x4 (was 0x100107, writing 0x100147)
<6>[ 9965.230557] [0: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x0 (was 0xa575144d, writing 0xa575144d)
<6>[ 9965.230768] [0: system_server: 4318] exynos-pcie 15660000.pcie1: exynos_
pcie_poweron, end of poweron, pcie state: 3
<4>[ 9965.230797] [0: system_server: 4318] dhdpcie_resume_dev: Enter
<6>[ 9965.230956] [0: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_DEVCTL:
2c10
<6>[ 9965.231131] [0: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_LNKCTL:
142
<6>[ 9965.231158] [0: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_SLTCTL:
0
<6>[ 9965.231185] [0: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_RTCTL:
0
<6>[ 9965.231584] [0: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_DEVCTL2
: 400
<6>[ 9965.231784] [0: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_LNKCTL2

: 1
<6>[ 9965.231812] [0: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_SLTCTL2
: 0
<6>[ 9965.232215] [0: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x3c (was 0x100, writing 0x1ed)
<6>[ 9965.232526] [0: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x38 (was 0x0, writing 0x0)
<6>[ 9965.232930] [0: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x34 (was 0x48, writing 0x48)
<6>[ 9965.233096] [0: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x30 (was 0x0, writing 0x0)
<6>[ 9965.233260] [0: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x2c (was 0x77414e4, writing 0x77414e4)
<6>[ 9965.233431] [0: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x28 (was 0x0, writing 0x0)
<6>[ 9965.233561] [0: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x24 (was 0x0, writing 0x0)
<6>[ 9965.233724] [0: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x20 (was 0x0, writing 0x0)
<6>[ 9965.233897] [0: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x1c (was 0x0, writing 0x0)
<6>[ 9965.234061] [0: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x18 (was 0x4, writing 0x1c400004)
<6>[ 9965.234336] [0: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x18 (writing 0x1c400004)
<6>[ 9965.234484] [0: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x14 (was 0x0, writing 0x0)
<6>[ 9965.234646] [0: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x10 (was 0x4, writing 0x1c200004)
<6>[ 9965.234907] [0: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x10 (writing 0x1c200004)
<6>[ 9965.235059] [0: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0xc (was 0x0, writing 0x10)
<6>[ 9965.235321] [0: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x8 (was 0x2800003, writing 0x2800003)
<6>[ 9965.235474] [0: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x4 (was 0x100000, writing 0x100146)
<6>[ 9965.235734] [0: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x0 (was 0x43e914e4, writing 0x43e914e4)
<4>[ 9965.237356] [0: system_server: 4318] dhdpcie_send_mb_data: H2D_MB_DATA:
0x00000010
<4>[ 9965.237409] [0: system_server: 4318] dhdpcie_send_mb_data: send H2D_HOST
_D0_INFORM to dongle
<6>[ 9965.238222] [0: system_server: 4318] PM: resume of devices complete afte
r 232.879 msecs
<7>[ 9965.245461] [0: system_server: 4318] PM: Finishing wakeup.
<7>[ 9965.247252] [1:
khubd: 742] hub 1-0:1.0: state 7 ports 2 chg 00
00 evt 0000
<3>[ 9965.247703] [2:
mdm_helper: 3355] esoc REQ enginer waiting on request
<4>[ 9965.245502] [3:onic.tuiservice: 659] Restarting tasks ...
t-base-tui module: ioctl 0x80047402 <6>[ 9965.250694] [3:onic.tuiservice: 659]
TUI_IO_WAITCMD
<6>[ 9965.252550] [0:
kworker/0:2:31050] exynos-dwc3 15400000.usb: dwc3_exyn
os_runtime_suspend
<4>[ 9965.252771] [0: system_server: 4318] done.
<6>[ 9965.254455] [0: thread_hotplug:17962] frequency info : 400000, prev_cmd 1
, exe_cmd 4
<6>[ 9965.254666] [0: thread_hotplug:17962] lcd is on : 0, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9965.254707] [0: thread_hotplug:17962] cluster1 cores hotplug out : 0

<7>[ 9965.254791] [0:


kworker/0:1:25228]
to (267, 0x1ab3)
<6>[ 9965.255426] [0:
kworker/0:1:25228]
0_REG(0x1603), QRTABLE30_REG(0x1005)
<6>[ 9965.259353] [0: system_server: 4318]
equest
<6>[ 9965.259421] [0: system_server: 4318]
<6>[ 9965.259672] [2: system_server: 4318]
1.428915289 UTC
<6>[ 9965.261604] [0:
kworker/0:1:25228]
changed
<6>[ 9965.261684] [0:
kworker/0:1:25228]
bat:267)
<6>[ 9965.261871] [0:
kworker/0:1:25228]
sleep_mode = 0
<6>[ 9965.261936] [0:
kworker/0:1:25228]

max77843_fg_write_temp: temperature
max77843_fg_check_qrtable: QRTABLE2
mdm_hsic_pm_notify_event: unblock r
request_active_lock_set
PM: suspend exit 2016-11-17 16:18:4
power_supply battery: power_supply_
Skip monitor work(9, Vnow:4122mV, T
sec_bat_get_property cable type = 1
sec_bat_get_property cable type = 1

<6>[ 9965.269202] [2:


healthd: 3346] sec_bat_get_property cable type = 1
sleep_mode = 0
<12>[ 9965.270505] [2:
healthd: 3346] healthd: battery l=98 v=4122 t=26.
7 h=2 st=3 c=0 o=1 ca=-403 ct=0 ps=0 chg= 2016-11-17 16:18:41.438986874 UTC
<12>[ 9965.270594] [2:
healthd: 3346] healthd: battery l=98 v=4122 t=26.
7 h=2 st=3 c=0 o=1 ca=-403 ct=0 ps=0 chg= 2016-11-17 16:18:41.438986874 UTC hv=0
sec=0 chg=
<14>[ 9965.270630] [2:
healthd: 3346] healthd-android: healthd_mode_andr
oid_battery_update
<14>[ 9965.270661] [2:
healthd: 3346] BatteryPropertiesRegistrar: notify
Listeners : start
<14>[ 9965.270702] [2:
healthd: 3346] IBatteryPropertiesListener : batte
ryPropertiesChanged!
<14>[ 9965.270702] [2:
healthd: 3346] : BatteryPropertiesRegistrar: noti
fyListeners : done
<6>[ 9965.279225] [3: kworker/u16:18:32540] mdm_hsic_rpm_check
<6>[ 9965.279262] [3: kworker/u16:18:32540] mdm_hsic_rpm_restart
<6>[ 9965.307242] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9965.307315] [3:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[ 9965.307339] [3:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[ 9965.307368] [3:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9965.307570] [3:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<7>[ 9965.756896] [0:
kworker/0:1:25228] usb 1-2: usb auto-suspend, wakeup 1
<6>[ 9965.769521] [1:
kworker/1:4:14113] MIF(543000): unset TMU_COLD: 662500
=> (set_volt: 625000, get_volt: 625000)
<7>[ 9965.770366] [0:
kworker/0:1:25228] hub 1-0:1.0: hub_suspend
<7>[ 9965.770517] [0:
kworker/0:1:25228] usb usb1: bus auto-suspend, wakeup
1
<7>[ 9965.770608] [0:
kworker/0:1:25228] s5p-ehci 15510000.usb: suspend root
hub
<6>[ 9965.771700] [1:
kworker/1:4:14113] DISP(100000): unset TMU_COLD: (set_
volt: 650000, get_volt: 650000)
<3>[ 9965.772801] [0:
kworker/0:1:25228] s5p-ehci 15510000.usb: s5p_ehci_run
time_suspend
<6>[ 9965.773106] [1:
kworker/1:4:14113] INT(100000): unset TMU_COLD: 687500
=> 650000
<6>[ 9965.773141] [1:
kworker/1:4:14113] tmu temperature state 1 to 0, cur_t
emp : 36

<7>[ 9965.786006] [0:


kworker/0:1:25228] samsung-usb2phy 15530000.usb2phy: s
amsung_usb2phy_runtime_suspend
<6>[ 9965.786061] [0:
kworker/0:1:25228] request_active_lock_release
<6>[ 9965.786083] [0:
kworker/0:1:25228] s5p_ehci_runtime_suspend: usage=0,
child=0
<4>[ 9966.022183] [3:
Binder_2: 4031] KEK_PACK[4031] del_kek :: entered
<4>[ 9966.022210] [3:
Binder_2: 4031] KEK_PACK[4031] find_kek_pack :: Fou
nd kek-pack : 0
<4>[ 9966.022226] [3:
Binder_2: 4031] KEK_PACK[4031] find_kek_item :: Fou
nd kek-item : 10
<4>[ 9966.022240] [3:
Binder_2: 4031] KEK_PACK[4031] del_kek_item :: ente
red
<4>[ 9966.022262] [3:
Binder_2: 4031] KEK_PACK[4031] del_kek :: entered
<4>[ 9966.022275] [3:
Binder_2: 4031] KEK_PACK[4031] find_kek_pack :: Fou
nd kek-pack : 0
<4>[ 9966.022289] [3:
Binder_2: 4031] KEK_PACK[4031] find_kek_item :: Fou
nd kek-item : 12
<4>[ 9966.022303] [3:
Binder_2: 4031] KEK_PACK[4031] del_kek_item :: ente
red
<4>[ 9966.022317] [3:
Binder_2: 4031] KEK_PACK[4031] del_kek :: entered
<4>[ 9966.022331] [3:
Binder_2: 4031] KEK_PACK[4031] find_kek_pack :: Fou
nd kek-pack : 0
<4>[ 9966.022345] [3:
Binder_2: 4031] KEK_PACK[4031] find_kek_item :: Fou
nd kek-item : 14
<4>[ 9966.022358] [3:
Binder_2: 4031] KEK_PACK[4031] del_kek_item :: ente
red
<4>[ 9966.022372] [3:
Binder_2: 4031] KEK_PACK[4031] del_kek :: entered
<4>[ 9966.022386] [3:
Binder_2: 4031] KEK_PACK[4031] find_kek_pack :: Fou
nd kek-pack : 0
<4>[ 9966.022400] [3:
Binder_2: 4031] KEK_PACK[4031] find_kek_item :: Fou
nd kek-item : 16
<4>[ 9966.022413] [3:
Binder_2: 4031] KEK_PACK[4031] del_kek_item :: ente
red
<4>[ 9966.022429] [3:
Binder_2: 4031] running cache cleanup thread - sdpid : 0
<6>[ 9966.309358] [0: kworker/u16:18:32540] [mhi_initiate_m3] Entered MHI state
4, Pending M0 0 Pending M3 0
<6>[ 9966.309388] [0: kworker/u16:18:32540] [mhi_initiate_m3] Triggering wake o
ut of M2
<6>[ 9966.320568] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26e60
<6>[ 9966.320596] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9966.320766] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9966.320789] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9966.320805] [0:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9966.321167] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9966.321303] [2: kworker/u16:18:32540] [mhi_initiate_m3] Cancelled M1 time
r, timer was active
<6>[ 9966.321335] [2: kworker/u16:18:32540] [mhi_initiate_m3] Waiting for M3 co
mpletion.
<6>[ 9966.331182] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9966.331347] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 5
<6>[ 9966.331367] [0:MHI_STATE_THREA: 4605] [process_M3_transition] Processing
M3 state transition
<6>[ 9966.331511] [2: kworker/u16:18:32540] [mhi_initiate_m3] M3 completion rec

eived
<6>[ 9966.331539] [2: kworker/u16:18:32540] [mhi_turn_off_pcie_link] Entered...
<6>[ 9966.342620] [2: kworker/u16:18:32540] mhi 0000:01:00.0: [debug] pmcsr reg
: b dev->current_state : 0
<6>[ 9966.342756] [2: kworker/u16:18:32540] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9966.342829] [2: kworker/u16:18:32540] exynos-pcie 10ee0000.pcie0: ack mes
sage is ok
<6>[ 9966.342846] [2: kworker/u16:18:32540] exynos-pcie 10ee0000.pcie0: receive
d Enter_L23_READY DLLP packet
<6>[ 9966.342868] [2: kworker/u16:18:32540] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[ 9966.342958] [2: kworker/u16:18:32540] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[ 9966.372932] [2: kworker/u16:18:32540] [mhi_turn_off_pcie_link] Exited...
<6>[ 9967.006057] [0: system_server: 4318] PM: suspend entry 2016-11-17 16:18:
43.175311423 UTC
<6>[ 9967.006081] [2: system_server: 4318] PM: Syncing filesystems ... done.
<7>[ 9967.015248] [2: system_server: 4318] PM: Preparing system for mem sleep
<6>[ 9967.015350] [3: system_server: 4318] exynos_dm_hotplug_notifier, 958 : d
ynamic_hotplug CMD_SLEEP_PREPARE
<6>[ 9967.015378] [3: system_server: 4318] nr_sleep_prepare_cpus : 4, tmp_nr_s
leep_prepare_cpus : 5
<6>[ 9967.015419] [0: thread_hotplug:17962] stopped thread_hotplug
<6>[ 9967.019716] [3: system_server: 4318] voltage(793750) + volt_offset(37500
) is bigger than max_volt(793750)
<6>[ 9967.019898] [3: system_server: 4318] MIF(1552000): set TMU_COLD: 793750
=> (set_volt: 793750, get_volt: 793750)
<6>[ 9967.020597] [3: system_server: 4318] DISP(100000): set TMU_COLD: 650000
=> (set_volt: 687500, get_volt: 687500)
<6>[ 9967.021422] [3: system_server: 4318] INT(100000): set TMU_COLD: 650000 =
> 687500
<6>[ 9967.021450] [3: system_server: 4318] tmu temperature state 0 to 1
<6>[ 9967.021478] [3: system_server: 4318] mdm_hsic_pm_notify_event: block req
uest
<3>[ 9967.022328] [2:
mdm_helper: 3355] esoc REQ engine released from wait
<4>[ 9967.022003] [3: system_server: 4318] Freezing user space processes ... (
elapsed 0.004 seconds) done.
<4>[ 9967.026381] [3: system_server: 4318] Freezing remaining freezable tasks
... (elapsed 0.004 seconds) done.
<7>[ 9967.030773] [3: system_server: 4318] PM: Entering mem sleep
<4>[ 9967.030796] [3: system_server: 4318] Suspending console(s) (use no_conso
le_suspend to debug)
<6>[ 9967.031740] [3: system_server: 4318] exynos-dwc3 15400000.usb: dwc3_exyn
os_runtime_resume
<6>[ 9967.032944] [1: kworker/u16:18:32540] [mhi_suspend] [mhi_suspend]
<6>[ 9967.032972] [1: kworker/u16:18:32540] [mhi_suspend] Entered, sys state 2,
MHI state 5
<4>[ 9967.032987] [3: system_server: 4318] dhdpcie_send_mb_data: H2D_MB_DATA:
0x00000001
<6>[ 9967.033002] [1: kworker/u16:18:32540] [mhi_initiate_m3] Entered MHI state
5, Pending M0 0 Pending M3 0
<6>[ 9967.033022] [1: kworker/u16:18:32540] [mhi_initiate_m3] MHI state 5, link
state 0.
<4>[ 9967.037550] [3: system_server: 4318] dhdpcie_send_mb_data: send H2D_HOST
_D3_INFORM to dongle
<4>[ 9967.039654] I[0:
swapper/0:
0] D2H_MB_DATA: 0x00000001
<4>[ 9967.039675] I[0:
swapper/0:
0] dhdpcie_handle_mb_data D2H_MB_DATA:
Received D3 ACK
<4>[ 9967.040055] [0: system_server: 4318] dhdpcie_send_mb_data: H2D_MB_DATA:

0x00000008
<4>[ 9967.040406] [0: system_server:
_D0_INFORM_IN_USE to dongle
<4>[ 9967.040431] [0: system_server:
<6>[ 9967.040692] [0: system_server:
43e914e4
<6>[ 9967.040885] [0: system_server:
100146
<6>[ 9967.041084] [0: system_server:
2800003
<6>[ 9967.041282] [0: system_server:
10
<6>[ 9967.041484] [0: system_server:
1c200004
<6>[ 9967.041684] [0: system_server:
0
<6>[ 9967.041883] [0: system_server:
1c400004
<6>[ 9967.042084] [0: system_server:
0
<6>[ 9967.042286] [0: system_server:
0
<6>[ 9967.042509] [0: system_server:
0
<6>[ 9967.042686] [0: system_server:
0
<6>[ 9967.042887] [0: system_server:
77414e4
<6>[ 9967.043086] [0: system_server:
0
<6>[ 9967.043286] [0: system_server:
48
<6>[ 9967.043488] [0: system_server:
0
<6>[ 9967.043687] [0: system_server:
1ed
<6>[ 9967.043888] [0: system_server:
2c10
<6>[ 9967.044089] [0: system_server:
142
<6>[ 9967.044104] [0: system_server:
0
<6>[ 9967.044120] [0: system_server:
0
<6>[ 9967.044287] [0: system_server:
: 400
<6>[ 9967.044488] [0: system_server:
: 1
<6>[ 9967.044504] [0: system_server:
: 0
<6>[ 9967.047097] [0: system_server:
device_vendor_id reg : 43e914e4
<6>[ 9967.047293] [0: system_server:
PMCSR reg value: 4108
<6>[ 9967.047495] [0: system_server:
PMCSR reg value: 410b
<6>[ 9967.047660] [0: system_server:
device_vendor_id reg : 43e914e4
<6>[ 9967.059528] [0: system_server:
eg : 410b dev->current_state : 0

4318] dhdpcie_send_mb_data: send H2D_HOST


4318] dhdpcie_suspend_dev: Enter
4318] pcieh 0001:01:00.0: reg offset: 0:
4318] pcieh 0001:01:00.0: reg offset: 4:
4318] pcieh 0001:01:00.0: reg offset: 8:
4318] pcieh 0001:01:00.0: reg offset: 12:
4318] pcieh 0001:01:00.0: reg offset: 16:
4318] pcieh 0001:01:00.0: reg offset: 20:
4318] pcieh 0001:01:00.0: reg offset: 24:
4318] pcieh 0001:01:00.0: reg offset: 28:
4318] pcieh 0001:01:00.0: reg offset: 32:
4318] pcieh 0001:01:00.0: reg offset: 36:
4318] pcieh 0001:01:00.0: reg offset: 40:
4318] pcieh 0001:01:00.0: reg offset: 44:
4318] pcieh 0001:01:00.0: reg offset: 48:
4318] pcieh 0001:01:00.0: reg offset: 52:
4318] pcieh 0001:01:00.0: reg offset: 56:
4318] pcieh 0001:01:00.0: reg offset: 60:
4318] pcieh 0001:01:00.0: PCI_EXP_DEVCTL:
4318] pcieh 0001:01:00.0: PCI_EXP_LNKCTL:
4318] pcieh 0001:01:00.0: PCI_EXP_SLTCTL:
4318] pcieh 0001:01:00.0: PCI_EXP_RTCTL:
4318] pcieh 0001:01:00.0: PCI_EXP_DEVCTL2
4318] pcieh 0001:01:00.0: PCI_EXP_LNKCTL2
4318] pcieh 0001:01:00.0: PCI_EXP_SLTCTL2
4318] pcieh 0001:01:00.0: [debug] step 1,
4318] pcieh 0001:01:00.0: [debug] step 2,
4318] pcieh 0001:01:00.0: [debug] step 3,
4318] pcieh 0001:01:00.0: [debug] step 4,
4318] pcieh 0001:01:00.0: [debug] pmcsr r

<6>[ 9967.059697] [0: system_server: 4318] pcieh 0001:01:00.0: [debug] device_


vendor_id reg : 43e914e4
<6>[ 9967.059731] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
0: a575144d
<6>[ 9967.059753] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
4: 100147
<6>[ 9967.059774] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
8: 6040001
<6>[ 9967.059795] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
12: 10010
<6>[ 9967.059816] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
16: 0
<6>[ 9967.059837] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
20: 0
<6>[ 9967.059988] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
24: 10100
<6>[ 9967.060009] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
28: 0
<6>[ 9967.060030] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
32: 1ff01c00
<6>[ 9967.060052] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
36: 0
<6>[ 9967.060073] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
40: 0
<6>[ 9967.060094] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
44: 0
<6>[ 9967.060115] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
48: 0
<6>[ 9967.060136] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
52: 40
<6>[ 9967.060157] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
56: 0
<6>[ 9967.060178] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
60: 101ed
<6>[ 9967.060330] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL: 2010
<6>[ 9967.060351] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL: 42
<6>[ 9967.060367] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL: 0
<6>[ 9967.060387] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_RTCT
L: 0
<6>[ 9967.060408] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL2: 400
<6>[ 9967.060429] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL2: 1
<6>[ 9967.060444] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL2: 0
<6>[ 9967.060554] [0: system_server: 4318] exynos-pcie 15660000.pcie1: ack mes
sage is ok
<6>[ 9967.060572] [0: system_server: 4318] exynos-pcie 15660000.pcie1: receive
d Enter_L23_READY DLLP packet
<6>[ 9967.060595] [0: system_server: 4318] exynos-pcie 15660000.pcie1: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[ 9967.060696] [0: system_server: 4318] exynos-pcie 15660000.pcie1: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[ 9967.062940] [0: system_server: 4318] voltage(793750) + volt_offset(37500
) is bigger than max_volt(793750)
<6>[ 9967.063089] [0: system_server: 4318] DEVFREQ(MIF): suspend voltage(79375
0 793750)

<6>[ 9967.065303] [0: system_server:


check : 0x00
<6>[ 9967.065480] [0: system_server:
2016-11-17 16:18:42(0x10)PM
<5>[ 9967.065759] [0: system_server:
I cache
<6>[ 9967.071053] [0: system_server:
check : 0x00
<6>[ 9967.071227] [0: system_server:
2016-11-17 16:18:42(0x10)PM
<6>[ 9967.072489] [0: system_server:
check : 0x00
<6>[ 9967.072634] [0: system_server:
2016-11-17 16:18:42(0x10)PM
<6>[ 9967.072659] [0: system_server:
2016-11-17 16:18:50(0x10)PM
<6>[ 9967.073968] [0: system_server:
check : 0x00
<6>[ 9967.075272] [0: system_server:
check : 0x00
<6>[ 9967.075678] [0: system_server:
<6>[ 9967.076031] [0: system_server:
<2>[ 9967.076162] [0: system_server:
spend called
<2>[ 9967.076175] [0: system_server:
d
<6>[ 9967.076208] [0: system_server:
<6>[ 9967.076226] [0: system_server:
<6>[ 9967.077121] [0: system_server:
<6>[ 9967.077245] [0: system_server:
c ret = 0
<6>[ 9967.077258] [0: system_server:
<6>[ 9967.077282] [0: system_server:
<6>[ 9967.077332] [0: system_server:
<6>[ 9967.083814] [0: system_server:
<6>[ 9967.084006] [0: system_server:
<6>[ 9967.084062] [0: system_server:
<6>[ 9967.084072] [0: system_server:
r smc : 122f122
<6>[ 9967.113763] [0: system_server:
enter
<6>[ 9967.113861] [0: system_server:
pend_post : set AIF1 port slave
<6>[ 9967.113925] [0: system_server:
<6>[ 9967.113942] [0: system_server:
<4>[ 9967.113969] [0: system_server:
<4>[ 9967.113986] [0: system_server:
_status : 0 (detach)
<4>[ 9967.114007] [0: system_server:
<4>[ 9967.114022] [0: system_server:
(open)
<6>[ 9967.127221] [0: system_server:
<6>[ 9967.127245] [0: system_server:
<6>[ 9967.127258] [0: system_server:
tatus to [0]
<6>[ 9967.157231] [0: system_server:
<6>[ 9967.165820] I[0: system_server:
host ready val : 00000000
<6>[ 9967.165835] I[0: system_server:
dev ready val : 00000000

4318] s2m_rtc_update: RTC_UPDATE_REGISTER


4318] s2m-rtc s2m-rtc: s2m_rtc_read_time:
4318] sd 0:0:0:0: [sda] Synchronizing SCS
4318] s2m_rtc_update: RTC_UPDATE_REGISTER
4318] s2m-rtc s2m-rtc: s2m_rtc_read_time:
4318] s2m_rtc_update: RTC_UPDATE_REGISTER
4318] s2m-rtc s2m-rtc: s2m_rtc_read_time:
4318] s2m-rtc s2m-rtc: s2m_rtc_set_alarm:
4318] s2m_rtc_update: RTC_UPDATE_REGISTER
4318] s2m_rtc_update: RTC_UPDATE_REGISTER
4318] max86900_pm_suspend
4318] wake enabled for irq 7
4318] --------Si47xx i2c driver Si47xx_su
4318] Si47xx_suspend: device not supporte
4318]
4318]
4318]
4318]

[VIB] max77843_haptic_suspend
[VIB] max77843_haptic_i2c 0
wake enabled for irq 4
vfsspi_regulator_onoff: ocp off, sm

4318]
4318]
4318]
4318]
4318]
4318]
4318]

vfsspi_regulator_onoff: off
vfsspi_pm_suspend
[SSP] ssp_suspend:
[SSP] ssp_send_cmd: command 0xd4 0
mst_ldo_device_suspend
MST_LDO_DRV]]] suspend
MST_LDO_DRV]]] suspend success afte

4318] [MAX98505_DEBUG] max98505_suspend:


4318] pacific-audio sound.34: pacific_sus
4318]
4318]
4318]
4318]

wake enabled for irq 577


wake enabled for irq 580
certify_hall_suspend start
[keys] certify_hall_suspend certify

4318] hall_suspend start


4318] [keys] hall_suspend flip_status : 1
4318] [MIF] usb_phy_prepare_shutdown
4318] dev rdy val = 1
4318] set_host_stat:set host port power s
4318] wait_dev_pwr_stat:[PWR OFF]...
4318] mdm_device_ready_irq_handler, irq:
4318] mdm_device_ready_irq_handler, irq:

<6>[ 9967.187201] [0: system_server: 4318] done


<7>[ 9967.187246] [0: system_server: 4318] samsung-usb2phy 15530000.usb2phy: s
amsung_usb2phy_shutdown: End of setting for shutdown
<6>[ 9967.187485] [0: system_server: 4318] spi suspend is handled in device su
spend, dma mode = 0, bus_num = 3
<6>[ 9967.187507] [0: system_server: 4318] spi suspend is handled in device su
spend, dma mode = 0, bus_num = 1
<6>[ 9967.187617] [0: system_server: 4318] 3s3c24xx_serial_shutdown: port=4 res
et
<6>[ 9967.188670] [0: system_server: 4318] PM: suspend of devices complete aft
er 156.139 msecs
<6>[ 9967.188687] [0: system_server: 4318] ---Enabled regulators--<6>[ 9967.188714] [0: system_server: 4318] LDO1: 1200000uV, 0xffffffea mode, n
ull
<6>[ 9967.190447] [0: system_server: 4318] VDDIO_1.8V_COMP: 1800000uV, 0xfffff
fea mode, null
<6>[ 9967.191222] [0: system_server: 4318] VDDD_RET_1.0V_COMP: 700000uV, 0xfff
fffea mode, null
<6>[ 9967.192872] [0: system_server: 4318] VDD20_1P8_AP: 1800000uV, 0xffffffea
mode, null
<6>[ 9967.193403] [0: system_server: 4318] VCC_1.8V_CODEC_PMIC: 1800000uV, 0xf
fffffea mode, spi0.0-DBVDD1, spi0.0-AVDD, regulator.47-SUPPLY
<6>[ 9967.194768] [0: system_server: 4318] regulator-dummy: -22uV, 0xffffffea
mode, null
<6>[ 9967.194783] [0: system_server: 4318] Always On regulator count :10 [VDD2
2_1P1_2MIC][vdd_ldo8][vdd_mldo][vdd_lldo][vdd_disp_cam0][vdd_int][vdd_apollo][vd
d_atlas][vdd_mif][safeout1_range]
<6>[ 9967.194796] [0: system_server: 4318] ---Enabled regulator count: 16--<6>[ 9967.196491] [0: system_server: 4318] PM: late suspend of devices complet
e after 1.673 msecs
<6>[ 9967.197247] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
0: ffffffff
<6>[ 9967.197267] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
4: ffffffff
<6>[ 9967.197283] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
8: ffffffff
<6>[ 9967.197300] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
12: ffffffff
<6>[ 9967.197316] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
16: ffffffff
<6>[ 9967.197333] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
20: ffffffff
<6>[ 9967.197350] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
24: ffffffff
<6>[ 9967.197366] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
28: ffffffff
<6>[ 9967.197383] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
32: ffffffff
<6>[ 9967.197400] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
36: ffffffff
<6>[ 9967.197417] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
40: ffffffff
<6>[ 9967.197433] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
44: ffffffff
<6>[ 9967.197449] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
48: ffffffff
<6>[ 9967.197466] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
52: ffffffff
<6>[ 9967.197482] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
56: ffffffff

<6>[ 9967.197499] [0: system_server:


60: ffffffff
<6>[ 9967.197516] [0: system_server:
TL: 0
<6>[ 9967.197532] [0: system_server:
TL: 0
<6>[ 9967.197548] [0: system_server:
TL: 0
<6>[ 9967.197564] [0: system_server:
L: 0
<6>[ 9967.197580] [0: system_server:
TL2: 0
<6>[ 9967.197595] [0: system_server:
TL2: 0
<6>[ 9967.197611] [0: system_server:
TL2: 0
<6>[ 9967.198511] [0: system_server:
eady off
<6>[ 9967.198532] [0: system_server:
eady off
<6>[ 9967.198661] [0: system_server:
oirq, dma mode = 1, bus_num = 4
<6>[ 9967.198686] [0: system_server:
oirq, dma mode = 1, bus_num = 0
<6>[ 9967.198912] [0: system_server:
te after 2.398 msecs
<4>[ 9967.198930] [0: system_server:
<6>[ 9967.199346] [1: system_server:
0, active_cpu=0x00000001
<6>[ 9967.199415] [1:
mc_fastcall:
<4>[ 9967.200470] [1:
migration/1:
ed
<4>[ 9967.200487] [1:
migration/1:
<5>[ 9967.201621] [2: system_server:
<4>[ 9967.203180] [2:
migration/2:
<5>[ 9967.204300] [0: system_server:
<4>[ 9967.206075] [3:
migration/3:
<4>[ 9967.206199] [3:
migration/3:
<5>[ 9967.207231] [0: system_server:
<4>[ 9967.208434] [4:
migration/4:
<5>[ 9967.209007] [0: system_server:
<6>[ 9967.210100] [0: system_server:
<6>[ 9967.210100] [0: system_server:
<6>[ 9967.210100] [0: system_server:
<6>[ 9967.210100] [0: system_server:
q
<6>[ 9967.210100] [0: system_server:
<6>[ 9967.210247] [0: system_server:
<4>[ 9967.210401] [1:
swapper/1:
<6>[ 9967.210976] [0: system_server:
1, active_cpu=0x00000000
<6>[ 9967.211022] [0:
mc_fastcall:
<6>[ 9967.211059] [0: system_server:
<4>[ 9967.211183] [2:
swapper/2:
<6>[ 9967.211647] [0: system_server:
<4>[ 9967.211769] [3:
swapper/3:
<6>[ 9967.212209] [0: system_server:
<4>[ 9967.212406] [4:
swapper/4:
<6>[ 9967.213134] [0: system_server:
<6>[ 9967.213333] [0: system_server:

4318] pcieport 0001:00:00.0: reg offset:


4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
4318] pcieport 0001:00:00.0: PCI_EXP_RTCT
4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
4318] exynos-pcie 15660000.pcie1: RC1 alr
4318] exynos-pcie 10ee0000.pcie0: RC0 alr
4318] spi suspend is handled in suspend_n
4318] spi suspend is handled in suspend_n
4318] PM: noirq suspend of devices comple
4318] Disabling non-boot CPUs ...
4318] MobiCore mcd: <- core_num=0x0000000
1747] MobiCore mcd: CoreSwap ok 1 -> 0
13] migrate_irqs: 16 callbacks suppress
13]
4318]
18]
4318]
23]
23]
4318]
28]
4318]
4318]
4318]
4318]
4318]

IRQ149 no longer affine to CPU1


CPU1: shutdown
IRQ150 no longer affine to CPU2
CPU2: shutdown
IRQ151 no longer affine to CPU3
IRQ250 no longer affine to CPU3
CPU3: shutdown
IRQ152 no longer affine to CPU4
CPU4: shutdown
[MIF] 1552000Khz
WAKEUP_STAT: 0x80000001
EINT_PEND: 0x00, 0x40 0x00, 0x80
Resume caused by IRQ 7, sec-pmic-ir

4318]
4318]
0]
4318]

Suspended for 0.000 seconds


Enabling non-boot CPUs ...
CPU1: Booted secondary processor
MobiCore mcd: <- core_num=0x0000000

1747]
4318]
0]
4318]
0]
4318]
0]
4318]
4318]

MobiCore mcd: CoreSwap ok 0 -> 1


CPU1 is up
CPU2: Booted secondary processor
CPU2 is up
CPU3: Booted secondary processor
CPU3 is up
CPU4: Booted secondary processor
CPU4 is up
spi resume is handled in resume_noi

rq, dma mode = 1, bus_num = 0


<6>[ 9967.213392] [0: system_server: 4318] spi resume is handled in resume_noi
rq, dma mode = 1, bus_num = 4
<6>[ 9967.225800] [0: system_server: 4318] pcieport 0001:00:00.0: [debug] pmcs
r reg : ffff dev->current_state : 3
<6>[ 9967.225812] [0: system_server: 4318] pcieport 0001:00:00.0: [debug] devi
ce_vendor_id reg : ffffffff
<6>[ 9967.225824] [0: system_server: 4318] pcieport 0001:00:00.0: Refused to c
hange power state, currently in D3, PCI_PM_CTRL=ffff
<6>[ 9967.225837] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL: 0
<6>[ 9967.225846] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL: 0
<6>[ 9967.225855] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL: 0
<6>[ 9967.225865] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_RTCT
L: 0
<6>[ 9967.225875] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL2: 0
<6>[ 9967.225884] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL2: 0
<6>[ 9967.225893] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL2: 0
<6>[ 9967.225905] [0: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x3c (was 0xffffffff, writing 0xffffffff)
<6>[ 9967.225916] [0: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x38 (was 0xffffffff, writing 0xffffffff)
<6>[ 9967.225927] [0: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x34 (was 0xffffffff, writing 0xffffffff)
<6>[ 9967.225938] [0: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x30 (was 0xffffffff, writing 0xffffffff)
<6>[ 9967.225948] [0: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x2c (was 0xffffffff, writing 0xffffffff)
<6>[ 9967.225959] [0: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x28 (was 0xffffffff, writing 0xffffffff)
<6>[ 9967.225970] [0: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x24 (was 0xffffffff, writing 0xffffffff)
<6>[ 9967.225981] [0: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x20 (was 0xffffffff, writing 0xffffffff)
<6>[ 9967.225992] [0: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x1c (was 0xffffffff, writing 0xffffffff)
<6>[ 9967.226003] [0: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x18 (was 0xffffffff, writing 0xffffffff)
<6>[ 9967.226014] [0: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x14 (was 0xffffffff, writing 0xffffffff)
<6>[ 9967.226025] [0: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x10 (was 0xffffffff, writing 0xffffffff)
<6>[ 9967.226036] [0: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0xc (was 0xffffffff, writing 0xffffffff)
<6>[ 9967.226047] [0: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x8 (was 0xffffffff, writing 0xffffffff)
<6>[ 9967.226057] [0: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x4 (was 0xffffffff, writing 0xffffffff)
<6>[ 9967.226068] [0: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x0 (was 0xffffffff, writing 0xffffffff)
<6>[ 9967.226092] [0: system_server: 4318] pcieh 0001:01:00.0: [debug] step 1,
device_vendor_id reg : ffffffff
<6>[ 9967.226101] [0: system_server: 4318] pcieh 0001:01:00.0: [debug] step 2,
PMCSR reg value: ffff
<6>[ 9967.226111] [0: system_server: 4318] pcieh 0001:01:00.0: [debug] step 3,

PMCSR reg value: 0


<6>[ 9967.226121] [0: system_server: 4318] pcieh 0001:01:00.0: [debug] step 4,
device_vendor_id reg : ffffffff
<6>[ 9967.239122] [0: system_server: 4318] pcieh 0001:01:00.0: [debug] pmcsr r
eg : ffff dev->current_state : 3
<6>[ 9967.239132] [0: system_server: 4318] pcieh 0001:01:00.0: [debug] device_
vendor_id reg : ffffffff
<6>[ 9967.239143] [0: system_server: 4318] pcieh 0001:01:00.0: Refused to chan
ge power state, currently in D3, PCI_PM_CTRL=ffff
<6>[ 9967.239156] [0: system_server: 4318] exynos-pcie 15660000.pcie1: PCIE li
nk state is 0
<6>[ 9967.239166] [0: system_server: 4318] pcieh 0001:01:00.0: [debug] setp 5,
PMCSR reg value: ffff
<6>[ 9967.239177] [0: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_DEVCTL:
2c10
<6>[ 9967.239186] [0: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_LNKCTL:
142
<6>[ 9967.239195] [0: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_SLTCTL:
0
<6>[ 9967.239204] [0: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_RTCTL:
0
<6>[ 9967.239213] [0: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_DEVCTL2
: 400
<6>[ 9967.239222] [0: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_LNKCTL2
: 1
<6>[ 9967.239232] [0: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_SLTCTL2
: 0
<6>[ 9967.239243] [0: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x3c (was 0xffffffff, writing 0x1ed)
<6>[ 9967.239254] [0: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x38 (was 0xffffffff, writing 0x0)
<6>[ 9967.239266] [0: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x34 (was 0xffffffff, writing 0x48)
<6>[ 9967.239276] [0: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x30 (was 0xffffffff, writing 0x0)
<6>[ 9967.239287] [0: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x2c (was 0xffffffff, writing 0x77414e4)
<6>[ 9967.239298] [0: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x28 (was 0xffffffff, writing 0x0)
<6>[ 9967.239309] [0: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x24 (was 0xffffffff, writing 0x0)
<6>[ 9967.269282] [0: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x20 (was 0xffffffff, writing 0x0)
<6>[ 9967.299252] [0: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x1c (was 0xffffffff, writing 0x0)
<6>[ 9967.327800] [4: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x18 (was 0xffffffff, writing 0x1c400004)
<6>[ 9967.357773] [4: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x14 (was 0xffffffff, writing 0x0)
<6>[ 9967.387754] [4: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x10 (was 0xffffffff, writing 0x1c200004)
<6>[ 9967.417725] [4: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0xc (was 0xffffffff, writing 0x10)
<6>[ 9967.417736] [4: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x8 (was 0xffffffff, writing 0x2800003)
<6>[ 9967.417747] [4: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x4 (was 0xffffffff, writing 0x100146)
<6>[ 9967.417757] [4: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x0 (was 0xffffffff, writing 0x43e914e4)
<6>[ 9967.429115] [4: system_server: 4318] pcieport 0000:00:00.0: [debug] pmcs

r reg : ffff dev->current_state : 3


<6>[ 9967.429125] [4: system_server: 4318] pcieport 0000:00:00.0: [debug] devi
ce_vendor_id reg : ffffffff
<6>[ 9967.429135] [4: system_server: 4318] pcieport 0000:00:00.0: Refused to c
hange power state, currently in D3, PCI_PM_CTRL=ffff
<6>[ 9967.442458] [4: system_server: 4318] mhi 0000:01:00.0: [debug] pmcsr reg
: ffff dev->current_state : 3
<6>[ 9967.442468] [4: system_server: 4318] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : ffffffff
<6>[ 9967.442477] [4: system_server: 4318] mhi 0000:01:00.0: Refused to change
power state, currently in D3, PCI_PM_CTRL=ffff
<6>[ 9967.442596] [4: system_server: 4318] PM: noirq resume of devices complet
e after 229.448 msecs
<6>[ 9967.442983] [4: system_server: 4318] exynos-mailbox 11240000.mailbox: Lo
ading APM firmware ...
<6>[ 9967.443145] [4: system_server: 4318] OK
<6>[ 9967.444258] [4: system_server: 4318] PM: early resume of devices complet
e after 1.382 msecs
<6>[ 9967.444378] [2: kworker/u16:15:32536] [mhi_resume] [mhi_resume]
<6>[ 9967.444395] [2: kworker/u16:15:32536] [mhi_initiate_m0] Entered MHI state
5, Pending M0 0 Pending M3 0
<6>[ 9967.444406] [2: kworker/u16:15:32536] [mhi_initiate_m0] Waiting for M0 M1
or M3. Currently 5...
<6>[ 9967.444417] [2: kworker/u16:15:32536] [mhi_initiate_m0] Wait complete sta
te: 5
<6>[ 9967.444426] [2: kworker/u16:15:32536] [mhi_turn_on_pcie_link] Entered...
<6>[ 9967.444440] [2: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, start of poweron, pcie state: 0
<6>[ 9967.444516] [4: system_server: 4318] s3c2410_wdt: watchdog enabled
<6>[ 9967.447840] [4: system_server: 4318] spi resume is handled in device res
ume, dma mode = 0, bus_num = 1
<6>[ 9967.447870] [4: system_server: 4318] spi resume is handled in device res
ume, dma mode = 0, bus_num = 3
<7>[ 9967.448080] [4: system_server: 4318] samsung-usb2phy 15530000.usb2phy: C
an't configure specified phy mode
<7>[ 9967.448098] [4: system_server: 4318] samsung-usb2phy 15530000.usb2phy: e
nd of samsung_usb2phy_init
<7>[ 9967.448109] [4: system_server: 4318] samsung-usb2phy 15530000.usb2phy: s
amsung_usb2phy_runtime_resume
<4>[ 9967.448128] [4: system_server: 4318] usb usb1: root hub lost power or wa
s reset
<7>[ 9967.448147] [4: system_server: 4318] s5p-ehci 15510000.usb: reset comman
d 0080b02 park=3 ithresh=8 period=1024 Reset HALT
<6>[ 9967.448162] [4: system_server: 4318] dev rdy val = 0
<6>[ 9967.448169] [4: system_server: 4318] set_host_stat:set host port power s
tatus to [1]
<6>[ 9967.448178] [4: system_server: 4318] wait_dev_pwr_stat:[PWR ON]...
<6>[ 9967.465249] I[0:
swapper/0:
0] mdm_device_ready_irq_handler, irq:
host ready val : 00000001
<6>[ 9967.465260] I[0:
swapper/0:
0] mdm_device_ready_irq_handler, irq:
dev ready val : 00000001
<6>[ 9967.478139] [4: system_server: 4318] done
<7>[ 9967.478178] [3: kworker/u16:18:32540] usb usb1: usb resume
<7>[ 9967.478194] [3: kworker/u16:18:32540] s5p-ehci 15510000.usb: resume root
hub after power loss
<7>[ 9967.478206] [3: kworker/u16:18:32540] s5p-ehci 15510000.usb: LRESET 0
<7>[ 9967.478228] [3: kworker/u16:18:32540] hub 1-0:1.0: hub_reset_resume
<7>[ 9967.478239] [3: kworker/u16:18:32540] hub 1-0:1.0: enabling power on all
ports
<6>[ 9967.482801] [2: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: D state

: 0, 3ee800
<6>[ 9967.495073] [2: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: exynos_
pcie_reset: Link up : 0x036dbe11
<6>[ 9967.495298] [2: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, end of poweron, pcie state: 3
<6>[ 9967.505938] [2: kworker/u16:15:32536] mhi 0000:01:00.0: [debug] pmcsr reg
: 8 dev->current_state : 3
<6>[ 9967.506120] [2: kworker/u16:15:32536] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9967.506131] [2: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: Recover
y for the link of RC0
<6>[ 9967.506142] [2: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: Recover
config space of RC0 and its EP
<6>[ 9967.506151] [2: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: Recover
RC0
<6>[ 9967.506179] [2: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: Recover
EP of RC0
<6>[ 9967.506572] [2: kworker/u16:15:32536] exynos-pcie 10ee0000.pcie0: Refresh
ing the saved config space in PCI framework for RC0 and its EP
<7>[ 9967.509148] [3: kworker/u16:18:32540] s5p-ehci 15510000.usb: GetStatus po
rt:2 status 001803 0 ACK POWER sig=j CSC CONNECT
<7>[ 9967.509161] [3: kworker/u16:18:32540] hub 1-0:1.0: port 2: status 0501 ch
ange 0001
<7>[ 9967.509220] [0: kworker/u16:14:32535] usb 1-2: finish reset-resume
<6>[ 9967.511784] [2: kworker/u16:15:32536] [mhi_turn_on_pcie_link] Exited...
<6>[ 9967.511798] [2: kworker/u16:15:32536] [mhi_initiate_m0] Setting M0 ...
<6>[ 9967.511947] [2: kworker/u16:15:32536] [mhi_initiate_m0] Exited...
<6>[ 9967.516176] [0: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 5 link 1, ring type 2, index 0 db 0x5fa26e80
<6>[ 9967.516190] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9967.516222] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9967.516233] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9967.516244] [1:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9967.516725] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9967.516734] [2: kworker/u16:15:32536] [mhi_resume] Wait complete state: 2
<4>[ 9967.530873] [0: system_server: 4318] ufs_get_device_info: UNIQUE NUMBER
= 02157df271b5cb31 , LT: 0x22
<6>[ 9967.534565] [0: system_server: 4318] exynos-ufs 15570000.ufs: Power mode
change(0): M(1)G(2)L(2)HS-series(2)
<4>[ 9967.534883] [0: system_server: 4318] hall_resume start
<4>[ 9967.534894] [0: system_server: 4318] [keys] hall_resume flip_status : 1
(open)
<4>[ 9967.534906] [0: system_server: 4318] certify_hall_resume start
<4>[ 9967.534915] [0: system_server: 4318] [keys] certify_hall_resume certify_
status : 0 (detach)
<6>[ 9967.534933] [0: system_server: 4318] wake disabled for irq 577
<6>[ 9967.534943] [0: system_server: 4318] wake disabled for irq 580
<6>[ 9967.535068] [0:
kworker/0:2:31050] [MAX98505_DEBUG] max98505_resume: e
nter
<6>[ 9967.535878] [1: system_server: 4318] mst_ldo_device_resume
<6>[ 9967.535912] [1: system_server: 4318] MST_LDO_DRV]]] resume
<6>[ 9967.535918] [1: system_server: 4318] MST_LDO_DRV]]] resume success after
smc : 122f122
<6>[ 9967.537351] [0: system_server: 4318] [SSP] ssp_resume:
<6>[ 9967.544595] [2: system_server: 4318] [SSP] ssp_send_cmd: command 0xd3 0
<3>[ 9967.544623] [2: system_server: 4318] vfsspi_wakeup_daemon send signal fa
iled by wakeup(0)

<6>[ 9967.544654] [2: system_server: 4318] vfsspi_regulator_onoff: ocp on, smc


ret = 0
<6>[ 9967.547701] [2: system_server: 4318] vfsspi_regulator_onoff: on
<6>[ 9967.547716] [2: system_server: 4318] vfsspi_pm_resume
<6>[ 9967.547764] [2: system_server: 4318] wake disabled for irq 4
<6>[ 9967.547797] [2: system_server: 4318] [VIB] max77843_haptic_resume
<2>[ 9967.547812] [2: system_server: 4318] Si47xx_resume: device not supported
<6>[ 9967.547830] [2: system_server: 4318] wake disabled for irq 7
<6>[ 9967.548025] [2: system_server: 4318] max86900_pm_resume
<6>[ 9967.548036] [0:irq/7-sec-pmic-: 794] s2m-rtc s2m-rtc: s2m_rtc_alarm_irq:
irq(550)
<6>[ 9967.549884] [2: system_server: 4318] s2m_rtc_update: RTC_UPDATE_REGISTER
check : 0x00
<6>[ 9967.550019] [2: system_server: 4318] s2m-rtc s2m-rtc: s2m_rtc_read_time:
2016-11-17 16:18:50(0x10)PM
<6>[ 9967.551363] [0:
kworker/0:0:13589] s2m_rtc_update: RTC_UPDATE_REGISTER
check : 0x00
<6>[ 9967.551700] [2: system_server: 4318] exynos-pcie 15660000.pcie1: exynos_
pcie_poweron, start of poweron, pcie state: 0
<6>[ 9967.551748] [0:
kworker/0:0:13589] s2m-rtc s2m-rtc: s2m_rtc_read_time:
2016-11-17 16:18:50(0x10)PM
<7>[ 9967.562481] [0: kworker/u16:14:32535] s5p-ehci 15510000.usb: port 2 reset
complete, port enabled
<7>[ 9967.562502] [0: kworker/u16:14:32535] s5p-ehci 15510000.usb: GetStatus po
rt:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
<6>[ 9967.572365] [2: system_server: 4318] exynos-pcie 15660000.pcie1: D state
: 0, ca2000
<6>[ 9967.573669] [2: system_server: 4318] exynos-pcie 15660000.pcie1: exynos_
pcie_reset: Link up : 0x0328b711
<6>[ 9967.573813] [2: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL: 2010
<6>[ 9967.573828] [2: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL: 42
<6>[ 9967.573837] [2: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL: 0
<6>[ 9967.573851] [2: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_RTCT
L: 0
<6>[ 9967.573865] [2: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL2: 400
<6>[ 9967.573879] [2: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL2: 1
<6>[ 9967.573888] [2: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL2: 0
<6>[ 9967.574035] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x3c (was 0x1ff, writing 0x101ed)
<6>[ 9967.574056] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x38 (was 0x0, writing 0x0)
<6>[ 9967.574071] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x34 (was 0x40, writing 0x40)
<6>[ 9967.574086] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x30 (was 0x0, writing 0x0)
<6>[ 9967.574101] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x2c (was 0x0, writing 0x0)
<6>[ 9967.574116] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x28 (was 0x0, writing 0x0)
<6>[ 9967.574131] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x24 (was 0x0, writing 0x0)
<6>[ 9967.574147] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x20 (was 0x1ff01c00, writing 0x1ff01c00)
<6>[ 9967.574162] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co

nfig space at offset 0x1c (was 0x0, writing 0x0)


<6>[ 9967.574177] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x18 (was 0x10100, writing 0x10100)
<6>[ 9967.574193] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x14 (was 0x0, writing 0x0)
<6>[ 9967.574208] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x10 (was 0x0, writing 0x0)
<6>[ 9967.574223] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0xc (was 0x10000, writing 0x10010)
<6>[ 9967.574243] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x8 (was 0x1, writing 0x6040001)
<6>[ 9967.574394] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x4 (was 0x100107, writing 0x100147)
<6>[ 9967.574414] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x0 (was 0xa575144d, writing 0xa575144d)
<6>[ 9967.574463] [2: system_server: 4318] exynos-pcie 15660000.pcie1: exynos_
pcie_poweron, end of poweron, pcie state: 3
<4>[ 9967.574473] [2: system_server: 4318] dhdpcie_resume_dev: Enter
<6>[ 9967.574615] [2: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_DEVCTL:
2c10
<6>[ 9967.574987] [2: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_LNKCTL:
142
<6>[ 9967.574997] [2: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_SLTCTL:
0
<6>[ 9967.575006] [2: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_RTCTL:
0
<6>[ 9967.575376] [2: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_DEVCTL2
: 400
<6>[ 9967.575751] [2: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_LNKCTL2
: 1
<6>[ 9967.575777] [2: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_SLTCTL2
: 0
<6>[ 9967.575847] [1: kworker/u16:14:32535] usb 1-2: reset high-speed USB devic
e number 2 using s5p-ehci
<6>[ 9967.576149] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x3c (was 0x100, writing 0x1ed)
<6>[ 9967.576617] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x38 (was 0x0, writing 0x0)
<6>[ 9967.576707] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x34 (was 0x48, writing 0x48)
<6>[ 9967.576798] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x30 (was 0x0, writing 0x0)
<6>[ 9967.576888] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x2c (was 0x77414e4, writing 0x77414e4)
<6>[ 9967.576978] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x28 (was 0x0, writing 0x0)
<6>[ 9967.577068] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x24 (was 0x0, writing 0x0)
<6>[ 9967.577158] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x20 (was 0x0, writing 0x0)
<6>[ 9967.577249] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x1c (was 0x0, writing 0x0)
<6>[ 9967.577339] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x18 (was 0x4, writing 0x1c400004)
<6>[ 9967.577509] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x18 (writing 0x1c400004)
<6>[ 9967.577599] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x14 (was 0x0, writing 0x0)
<6>[ 9967.577690] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x10 (was 0x4, writing 0x1c200004)

<6>[ 9967.577860] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi


g space at offset 0x10 (writing 0x1c200004)
<6>[ 9967.577951] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0xc (was 0x0, writing 0x10)
<6>[ 9967.578121] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x8 (was 0x2800003, writing 0x2800003)
<6>[ 9967.578212] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x4 (was 0x100000, writing 0x100146)
<6>[ 9967.578382] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x0 (was 0x43e914e4, writing 0x43e914e4)
<4>[ 9967.579625] [2: system_server: 4318] dhdpcie_send_mb_data: H2D_MB_DATA:
0x00000010
<4>[ 9967.579676] [2: system_server: 4318] dhdpcie_send_mb_data: send H2D_HOST
_D0_INFORM to dongle
<7>[ 9967.593880] [0: kworker/u16:14:32535] usb 1-2: USB quirks for this device
: 100
<6>[ 9967.598060] [0: kworker/u16:14:32535] [CHKRA:5]>
<6>[ 9967.598326] [2: system_server: 4318] PM: resume of devices complete afte
r 154.056 msecs
<6>[ 9967.599357] I[0:
swapper/0:
0] [NACB:5]<
<6>[ 9967.599368] I[0:
swapper/0:
0] notification_available_cb: set lpa
handling to false
<6>[ 9967.599386] I[0:
swapper/0:
0] [CHKRA:5]>
<7>[ 9967.600510] [0:
kworker/0:2:31050] max77843_fg_write_temp: temperature
to (268, 0x1acd)
<6>[ 9967.600900] [0:
kworker/0:2:31050] max77843_fg_check_qrtable: QRTABLE2
0_REG(0x1603), QRTABLE30_REG(0x1005)
<7>[ 9967.601623] [2: system_server: 4318] PM: Finishing wakeup.
<6>[ 9967.602171] [0:
kworker/0:0:13589] exynos-dwc3 15400000.usb: dwc3_exyn
os_runtime_suspend
<7>[ 9967.602184] [3:
khubd: 742] hub 1-0:1.0: state 7 ports 2 chg 00
04 evt 0000
<6>[ 9967.602213] [3:
khubd: 742] hub 1-0:1.0: port 2, status 0503, c
hange 0000, 480 Mb/s
<4>[ 9967.601637] [0:onic.tuiservice: 659] Restarting tasks ...
t-base-tui module: ioctl 0x80047402 <6>[ 9967.604662] [0:onic.tuiservice: 659]
TUI_IO_WAITCMD
<3>[ 9967.604779] [3:
mdm_helper: 3355] esoc REQ enginer waiting on request
<6>[ 9967.604906] [0:
kworker/0:2:31050] power_supply battery: power_supply_
changed
<4>[ 9967.604914] [2: system_server: 4318] done.
<6>[ 9967.604939] [0:
kworker/0:2:31050] Skip monitor work(18, Vnow:4047mV,
Tbat:268)
<6>[ 9967.605006] [0:
kworker/0:2:31050] sec_bat_get_property cable type = 1
sleep_mode = 0
<6>[ 9967.605028] [0:
kworker/0:2:31050] sec_bat_get_property cable type = 1
<6>[ 9967.608600] [2:
healthd: 3346] sec_bat_get_property cable type = 1
sleep_mode = 0
<12>[ 9967.609017] [2:
healthd: 3346] healthd: battery l=98 v=4047 t=26.
8 h=2 st=3 c=0 o=1 ca=-403 ct=0 ps=0 chg= 2016-11-17 16:18:50.673891894 UTC
<12>[ 9967.609049] [2:
healthd: 3346] healthd: battery l=98 v=4047 t=26.
8 h=2 st=3 c=0 o=1 ca=-403 ct=0 ps=0 chg= 2016-11-17 16:18:50.673891894 UTC hv=0
sec=0 chg=
<14>[ 9967.609074] [2:
healthd: 3346] healthd-android: healthd_mode_andr
oid_battery_update
<14>[ 9967.609136] [2:
healthd: 3346] BatteryPropertiesRegistrar: notify
Listeners : start
<14>[ 9967.609167] [2:
healthd: 3346] IBatteryPropertiesListener : batte
ryPropertiesChanged!

<14>[ 9967.609167] [2:


healthd: 3346] : BatteryPropertiesRegistrar: noti
fyListeners : done
<6>[ 9967.612015] [0: thread_hotplug:17993] frequency info : 1200000, prev_cmd
1, exe_cmd 4
<6>[ 9967.612035] [0: thread_hotplug:17993] lcd is on : 0, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9967.612048] [0: thread_hotplug:17993] cluster1 cores hotplug out : 0
<6>[ 9967.622729] [0: system_server: 4318] mdm_hsic_pm_notify_event: unblock r
equest
<6>[ 9967.622755] [0: system_server: 4318] request_active_lock_set
<6>[ 9967.622868] [0: system_server: 4318] PM: suspend exit 2016-11-17 16:18:5
0.687797396 UTC
<6>[ 9967.642522] [0: kworker/u16:0: 4939] mdm_hsic_rpm_check
<6>[ 9967.642548] [0: kworker/u16:0: 4939] mdm_hsic_rpm_restart
<6>[ 9967.709159] [0: thread_hotplug:17993] frequency info : 1500000, prev_cmd
4, exe_cmd 0
<6>[ 9967.709179] [0: thread_hotplug:17993] lcd is on : 0, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9967.709189] [0: thread_hotplug:17993] cluster1 cores hotplug out : 0
<4>[ 9967.709512] [5:
swapper/5:
0] CPU5: Booted secondary processor
<4>[ 9967.710591] [6:
swapper/6:
0] CPU6: Booted secondary processor
<4>[ 9967.711494] [7:
swapper/7:
0] CPU7: Booted secondary processor
<6>[ 9967.728041] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9967.728250] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[ 9967.728300] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[ 9967.728355] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9967.728585] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[ 9967.809346] [0: thread_hotplug:17993] frequency info : 400000, prev_cmd 0
, exe_cmd 4
<6>[ 9967.809397] [0: thread_hotplug:17993] lcd is on : 0, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9967.809433] [0: thread_hotplug:17993] cluster1 cores hotplug out : 0
<6>[ 9967.945411] [1:
Binder_3:30892] [SSP] ssp_sensorhub_write(4): -72,
58, 1, 0
<6>[ 9967.945450] [1:
Binder_3:30892] [SSP] send_instruction: Inst = 0xb8
, Sensor Type = 0x3a, data = 1
<6>[ 9967.971976] I[1: irq/15-SSP_Int: 1775] [SSP] ssp_sensorhub_list(4): 1, 1,
58, 1
<6>[ 9967.972032] [1: irq/15-SSP_Int: 1775] [SSP] [M] save
<6>[ 9967.972032] [1: irq/15-SSP_Int: 1775] SSP SIGNI
<6>[ 9967.972032] [1: irq/15-SSP_Int: 1775] AD 0 4 1 4, 20
<6>[ 9967.972032] [1: irq/15-SSP_Int: 1775] save bak odr 0, 1, 20, 20, 0
<6>[ 9967.972032] [1: irq/15-SSP_Int: 1775] save bak odr 0, 0, 20, 20, 0
<6>[ 9967.972032] [1: irq/15-SSP_Int: 1775] RM 0 3 1 3 60
<6>[ 9967.972032] [1: irq/15-SSP_Int: 1775] SSP SIGNI Change2
<6>[ 9967.972032] [1: irq/15-SSP_Int: 1775] AR-0,-34,146,8193,-1,20,0,0
<6>[ 9967.972084] [3:ssp_sensorhub_t: 1783] wakeup source sensorhub activation
skipped
<6>[ 9967.972291] I[2:SensorHubServic: 3439] [SSP] ssp_sensorhub_read(4): 1, 1,
58, 1
<6>[ 9967.980470] [1:
Binder_2:30887] [SSP] ssp_sensorhub_write(5): -63,
14, 16, 18, 51
<6>[ 9967.980504] [1:
Binder_2:30887] [SSP] send_instruction: Inst = 0xc1
, Sensor Type = 0xe, data = 16
<6>[ 9968.055646] [3:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c

00 00 03 01 00 96 19 43 00 00 00
<6>[ 9968.057782] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26ea0
<6>[ 9968.057819] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9968.057874] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9968.057898] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9968.057919] [2:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work was
cancelled
<6>[ 9968.058500] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9968.069015] [0:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 95
00 80 03 01 02 96 19 43 00 89 00 02 04 00
<6>[ 9968.103636] [1: wpa_supplicant: 5196] CFG80211-TRACE) __wl_cfg80211_scan
: START SCAN
<7>[ 9968.112576] [0:
kworker/0:2:31050] usb 1-2: usb auto-suspend, wakeup 1
<6>[ 9968.126312] [1:
kworker/1:4:14113] MIF(836000): unset TMU_COLD: 725000
=> (set_volt: 687500, get_volt: 687500)
<7>[ 9968.126340] [0:
kworker/0:2:31050] hub 1-0:1.0: hub_suspend
<7>[ 9968.126369] [0:
kworker/0:2:31050] usb usb1: bus auto-suspend, wakeup
1
<7>[ 9968.126388] [0:
kworker/0:2:31050] s5p-ehci 15510000.usb: suspend root
hub
<6>[ 9968.127288] [1:
kworker/1:4:14113] DISP(100000): unset TMU_COLD: (set_
volt: 650000, get_volt: 650000)
<3>[ 9968.127795] [0:
kworker/0:2:31050] s5p-ehci 15510000.usb: s5p_ehci_run
time_suspend
<6>[ 9968.128054] [1:
kworker/1:4:14113] INT(100000): unset TMU_COLD: 687500
=> 650000
<6>[ 9968.128074] [1:
kworker/1:4:14113] tmu temperature state 1 to 0, cur_t
emp : 38
<7>[ 9968.139223] [0:
kworker/0:2:31050] samsung-usb2phy 15530000.usb2phy: s
amsung_usb2phy_runtime_suspend
<6>[ 9968.139265] [0:
kworker/0:2:31050] request_active_lock_release
<6>[ 9968.139281] [0:
kworker/0:2:31050] s5p_ehci_runtime_suspend: usage=0,
child=0
<6>[ 9968.167008] [1: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9968.167069] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[ 9968.167094] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[ 9968.167123] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9968.167324] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[ 9968.539069] [5:
bgcompact:18002] compact_memory done.(32 times so fa
r)
<6>[ 9968.613407] [0: thread_hotplug:17993] frequency info : 500000, prev_cmd 4
, exe_cmd 1
<6>[ 9968.613462] [0: thread_hotplug:17993] lcd is on : 0, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9968.613493] [0: thread_hotplug:17993] cluster1 cores hotplug out : 0
<4>[ 9968.618745] [7:
migration/7: 43] IRQ155 no longer affine to CPU7
<5>[ 9968.620348] [0: thread_hotplug:17993] CPU7: shutdown
<4>[ 9968.624516] [6:
migration/6: 38] IRQ154 no longer affine to CPU6
<5>[ 9968.625157] [0: thread_hotplug:17993] CPU6: shutdown
<4>[ 9968.628845] [5:
migration/5: 33] IRQ153 no longer affine to CPU5
<5>[ 9968.629565] [0: thread_hotplug:17993] CPU5: shutdown
<4>[ 9968.632886] [4:
migration/4: 28] IRQ152 no longer affine to CPU4

<5>[ 9968.633541] [0: thread_hotplug:17993]


<4>[ 9968.638552] [3:
migration/3: 23]
<5>[ 9968.641284] [0: thread_hotplug:17993]
<6>[ 9968.742677] [0: thread_hotplug:17993]
, exe_cmd 5
<6>[ 9968.742739] [0: thread_hotplug:17993]
dm_hotplug disable = 0
<6>[ 9968.742777] [0: thread_hotplug:17993]
<6>[ 9968.803362] [0:wl_event_handle: 5324]
SCAN COMPLETED: scanned AP count=23
<5>[ 9968.849566] [0: thread_hotplug:17993]
<6>[ 9968.852649] [0: thread_hotplug:17993]
0, active_cpu=0x00000001
<6>[ 9968.852796] [1:
mc_fastcall: 1747]
<5>[ 9968.856403] [0: thread_hotplug:17993]
<6>[ 9968.858483] [0: thread_hotplug:17993]
, exe_cmd 1
<6>[ 9968.858522] [0: thread_hotplug:17993]
dm_hotplug disable = 0
<6>[ 9968.858548] [0: thread_hotplug:17993]
<4>[ 9968.956421] [1:
swapper/1:
0]
<6>[ 9968.969343] [0: thread_hotplug:17993]
1, active_cpu=0x00000000
<6>[ 9968.969456] [0:
mc_fastcall: 1747]
<4>[ 9968.970025] [2:
swapper/2:
0]
<6>[ 9968.972373] [0: thread_hotplug:17993]
1, exe_cmd 4
<6>[ 9968.972393] [0: thread_hotplug:17993]
dm_hotplug disable = 0
<6>[ 9968.972408] [0: thread_hotplug:17993]
<4>[ 9968.973129] [3:
swapper/3:
0]
<6>[ 9969.028261] [2: Loc_hal_worker: 5557]
<6>[ 9969.028320] [2: Loc_hal_worker: 5557]
<6>[ 9969.028347] [2: Loc_hal_worker: 5557]
01 00 0e 00 03 00 20 00
<7>[ 9969.028380] [2: Loc_hal_worker: 5557]
time_resume
<6>[ 9969.028397] [2: Loc_hal_worker: 5557]
<7>[ 9969.028422] [2: Loc_hal_worker: 5557]
amsung_usb2phy_runtime_resume
<6>[ 9969.028467] [2: Loc_hal_worker: 5557]
hild=0
<7>[ 9969.028491] [2: Loc_hal_worker: 5557]
<7>[ 9969.028509] [2: Loc_hal_worker: 5557]
hub
<7>[ 9969.028528] [2: Loc_hal_worker: 5557]
<7>[ 9969.049257] [2: Loc_hal_worker: 5557]
<7>[ 9969.049320] [2: Loc_hal_worker: 5557]
ange 0000
<7>[ 9969.049373] [3:
khubd: 742]
00 evt 0000
<7>[ 9969.049385] [2: Loc_hal_worker: 5557]
<6>[ 9969.052206] [2: Loc_hal_worker: 5557]
<6>[ 9969.060763] I[0:
kswapd0: 1027]
cb: len:12
<6>[ 9969.064535] I[0:
kswapd0: 1027]
03 00 20 00 01 00 0e 00
<6>[ 9969.064761] [1: kworker/u16:5: 1449]
: len:32
<6>[ 9969.064881] [0: kworker/u16:7:32450]

CPU4: shutdown
IRQ151 no longer affine to CPU3
CPU3: shutdown
frequency info : 400000, prev_cmd 1
lcd is on : 0, low power mode = 1,
cluster1 cores hotplug out : 0
CFG80211-TRACE) wl_escan_handler :
CPU2: shutdown
MobiCore mcd: <- core_num=0x0000000
MobiCore mcd: CoreSwap ok 1 -> 0
CPU1: shutdown
frequency info : 900000, prev_cmd 5
lcd is on : 0, low power mode = 1,
cluster1 cores hotplug out : 0
CPU1: Booted secondary processor
MobiCore mcd: <- core_num=0x0000000
MobiCore mcd: CoreSwap ok 0 -> 1
CPU2: Booted secondary processor
frequency info : 1000000, prev_cmd
lcd is on : 0, low power mode = 1,
cluster1 cores hotplug out : 0
CPU3: Booted secondary processor
msm_ipc_router_sendmsg: len, 51
msm_ipc_router_write_pkt: len, 51
IPCB Write: 03 01 00 00 33 00 00 00
s5p-ehci 15510000.usb: s5p_ehci_run
request_active_lock_set
samsung-usb2phy 15530000.usb2phy: s
s5p_ehci_runtime_resume: usage=1, c
usb usb1: usb auto-resume
s5p-ehci 15510000.usb: resume root
s5p-ehci 15510000.usb: LRESET 0
hub 1-0:1.0: hub_resume
hub 1-0:1.0: port 2: status 0503 ch
hub 1-0:1.0: state 7 ports 2 chg 00
usb 1-2: finish resume
[CHKRA:5]>
ipc_bridge 1-2:1.7: ipc_bridge_int_
IPCB Read: 03 01 01 00 0e 00 00 00
ipc_bridge 1-2:1.7: ipc_bridge_read
do_read_data: ver=3 type=1 src=3:00

000020 crx=1 siz=14 dst=1:0000000e


<6>[ 9969.065174] [1: Loc_hal_worker: 5575] IPCB Write: 03 07 00 00 14 00 00 00
01 00 ff ff 03 00 ff ff
<6>[ 9969.076768] I[0:
kswapd0: 1027] ipc_bridge 1-2:1.7: ipc_bridge_int_
cb: len:12
<6>[ 9969.082518] I[0:
kswapd0: 1027] IPCB Read: 03 01 00 00 0e 00 00 00
03 00 20 00 01 00 0e 00
<6>[ 9969.082718] [3: kworker/u16:5: 1449] ipc_bridge 1-2:1.7: ipc_bridge_read
: len:32
<6>[ 9969.082811] [3: kworker/u16:7:32450] do_read_data: ver=3 type=1 src=3:00
000020 crx=0 siz=14 dst=1:0000000e
<6>[ 9969.169272] [1: kworker/u16:7:32450] [mhi_initiate_m3] Entered MHI state
4, Pending M0 0 Pending M3 0
<6>[ 9969.169301] [1: kworker/u16:7:32450] [mhi_initiate_m3] Triggering wake o
ut of M2
<6>[ 9969.174827] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26ee0
<6>[ 9969.174854] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9969.174991] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9969.175007] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9969.175021] [2:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9969.175665] [1: kworker/u16:7:32450] [mhi_initiate_m3] Cancelled M1 time
r, timer was not active
<6>[ 9969.175684] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9969.175728] [1: kworker/u16:7:32450] [mhi_initiate_m3] Waiting for M3 co
mpletion.
<6>[ 9969.185354] [1: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9969.185537] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 5
<6>[ 9969.185553] [2:MHI_STATE_THREA: 4605] [process_M3_transition] Processing
M3 state transition
<6>[ 9969.185585] [1: kworker/u16:7:32450] [mhi_initiate_m3] M3 completion rec
eived
<6>[ 9969.185608] [1: kworker/u16:7:32450] [mhi_turn_off_pcie_link] Entered...
<6>[ 9969.199446] [2: kworker/u16:7:32450] mhi 0000:01:00.0: [debug] pmcsr reg
: b dev->current_state : 0
<6>[ 9969.199585] [2: kworker/u16:7:32450] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9969.199659] [2: kworker/u16:7:32450] exynos-pcie 10ee0000.pcie0: ack mes
sage is ok
<6>[ 9969.199673] [2: kworker/u16:7:32450] exynos-pcie 10ee0000.pcie0: receive
d Enter_L23_READY DLLP packet
<6>[ 9969.199693] [2: kworker/u16:7:32450] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[ 9969.199787] [2: kworker/u16:7:32450] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[ 9969.229785] [2: kworker/u16:7:32450] [mhi_turn_off_pcie_link] Exited...
<6>[ 9969.279221] [0: thread_hotplug:17993] frequency info : 1500000, prev_cmd
4, exe_cmd 0
<6>[ 9969.279243] [0: thread_hotplug:17993] lcd is on : 0, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9969.279253] [0: thread_hotplug:17993] cluster1 cores hotplug out : 0
<4>[ 9969.279804] [4:
swapper/4:
0] CPU4: Booted secondary processor
<4>[ 9969.281672] [5:
swapper/5:
0] CPU5: Booted secondary processor
<4>[ 9969.286493] [6:
swapper/6:
0] CPU6: Booted secondary processor
<4>[ 9969.287973] [7:
swapper/7:
0] CPU7: Booted secondary processor

<6>[ 9969.385966] [0: thread_hotplug:17993] frequency info : 400000, prev_cmd 0


, exe_cmd 4
<6>[ 9969.386027] [0: thread_hotplug:17993] lcd is on : 0, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9969.386065] [0: thread_hotplug:17993] cluster1 cores hotplug out : 0
<7>[ 9969.595535] [0:
kworker/0:2:31050] usb 1-2: usb auto-suspend, wakeup 1
<7>[ 9969.605982] [0:
kworker/0:2:31050] hub 1-0:1.0: hub_suspend
<7>[ 9969.606039] [0:
kworker/0:2:31050] usb usb1: bus auto-suspend, wakeup
1
<7>[ 9969.606063] [0:
kworker/0:2:31050] s5p-ehci 15510000.usb: suspend root
hub
<3>[ 9969.607145] [0:
kworker/0:2:31050] s5p-ehci 15510000.usb: s5p_ehci_run
time_suspend
<7>[ 9969.619295] [0:
kworker/0:2:31050] samsung-usb2phy 15530000.usb2phy: s
amsung_usb2phy_runtime_suspend
<6>[ 9969.619345] [0:
kworker/0:2:31050] request_active_lock_release
<6>[ 9969.619367] [0:
kworker/0:2:31050] s5p_ehci_runtime_suspend: usage=0,
child=0
<6>[ 9969.685862] [0: thread_hotplug:17993] frequency info : 900000, prev_cmd 4
, exe_cmd 1
<6>[ 9969.685893] [0: thread_hotplug:17993] lcd is on : 0, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9969.685910] [0: thread_hotplug:17993] cluster1 cores hotplug out : 0
<5>[ 9969.688967] [0: thread_hotplug:17993] CPU7: shutdown
<5>[ 9969.692730] [0: thread_hotplug:17993] CPU6: shutdown
<5>[ 9969.695857] [0: thread_hotplug:17993] CPU5: shutdown
<5>[ 9969.698652] [0: thread_hotplug:17993] CPU4: shutdown
<5>[ 9969.704539] [0: thread_hotplug:17993] CPU3: shutdown
<6>[ 9969.809456] [0: thread_hotplug:17993] frequency info : 600000, prev_cmd 1
, exe_cmd 5
<6>[ 9969.809507] [0: thread_hotplug:17993] lcd is on : 0, low power mode = 1,
dm_hotplug disable = 0
<6>[ 9969.809533] [0: thread_hotplug:17993] cluster1 cores hotplug out : 0
<6>[ 9969.905962] [1:
argosd: 3378] argos_pm_qos_notify: name:UFS, spee
d:198Mbps, prev level:-1, request level:0
<4>[ 9969.906785] [3:
swapper/3:
0] CPU3: Booted secondary processor
<4>[ 9969.908997] [4:
swapper/4:
0] CPU4: Booted secondary processor
<6>[ 9969.910129] [1:
argosd: 3378] argos_freq_lock name:UFS, CPU_MIN=0
, CPU_MAX=0, KFC_MIN=1300000, KFC_MAX=0, MIF=1264000, INT=400000
<4>[ 9969.912813] [5:
swapper/5:
0] CPU5: Booted secondary processor
<4>[ 9969.913976] [6:
swapper/6:
0] CPU6: Booted secondary processor
<4>[ 9969.915362] [7:
swapper/7:
0] CPU7: Booted secondary processor
<6>[ 9969.916417] [0: thread_hotplug:17993] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[ 9969.916432] [0: thread_hotplug:17993] lcd is on : 0, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9969.916444] [0: thread_hotplug:17993] cluster1 cores hotplug out : 0
<6>[ 9970.115851] [0: thread_hotplug:17993] frequency info : 1500000, prev_cmd
4, exe_cmd 0
<6>[ 9970.115892] [0: thread_hotplug:17993] lcd is on : 0, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9970.115903] [0: thread_hotplug:17993] cluster1 cores hotplug out : 0
<6>[ 9970.215916] [0: thread_hotplug:17993] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[ 9970.215939] [0: thread_hotplug:17993] lcd is on : 0, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9970.215951] [0: thread_hotplug:17993] cluster1 cores hotplug out : 0
<6>[ 9970.852667] [1: system_server: 4318] PM: suspend entry 2016-11-17 16:18:
53.917594179 UTC
<6>[ 9970.852688] [3: system_server: 4318] PM: Syncing filesystems ... done.

<7>[ 9970.865878] [3: system_server: 4318]


<6>[ 9970.866049] [2: system_server: 4318]
ynamic_hotplug CMD_SLEEP_PREPARE
<6>[ 9970.866066] [2: system_server: 4318]
leep_prepare_cpus : 5
<5>[ 9970.868503] [3: system_server: 4318]
<5>[ 9970.871037] [3: system_server: 4318]
<5>[ 9970.873321] [3: system_server: 4318]
<6>[ 9970.874704] [0: thread_hotplug:17993]
<6>[ 9970.879035] [0: system_server: 4318]
=> (set_volt: 762500, get_volt: 762500)
<6>[ 9970.879562] [0: system_server: 4318]
=> (set_volt: 687500, get_volt: 687500)
<6>[ 9970.880173] [0: system_server: 4318]
> 718750
<6>[ 9970.880188] [0: system_server: 4318]
<6>[ 9970.880205] [0: system_server: 4318]
uest
<3>[ 9970.880838] [3:
mdm_helper: 3355]
<4>[ 9970.880585] [0: system_server: 4318]
elapsed 0.003 seconds) done.
<4>[ 9970.884607] [0: system_server: 4318]
... (elapsed 0.004 seconds) done.
<7>[ 9970.888817] [0: system_server: 4318]
<4>[ 9970.888831] [0: system_server: 4318]
le_suspend to debug)
<6>[ 9970.889715] [0: system_server: 4318]
os_runtime_resume
<6>[ 9970.890698] [1: kworker/u16:7:32450]
<6>[ 9970.890715] [1: kworker/u16:7:32450]
MHI state 5
<4>[ 9970.890722] [0: system_server: 4318]
0x00000001
<6>[ 9970.890731] [1: kworker/u16:7:32450]
5, Pending M0 0 Pending M3 0
<6>[ 9970.890742] [1: kworker/u16:7:32450]
state 0.
<4>[ 9970.894937] [0: system_server: 4318]
_D3_INFORM to dongle
<4>[ 9970.897223] I[0:
swapper/0:
0]
<4>[ 9970.897235] I[0:
swapper/0:
0]
Received D3 ACK
<4>[ 9970.897270] [0: system_server: 4318]
0x00000008
<4>[ 9970.897289] [0: system_server: 4318]
_D0_INFORM_IN_USE to dongle
<4>[ 9970.897305] [0: system_server: 4318]
<6>[ 9970.897519] [0: system_server: 4318]
43e914e4
<6>[ 9970.897800] [0: system_server: 4318]
100146
<6>[ 9970.898152] [0: system_server: 4318]
2800003
<6>[ 9970.898367] [0: system_server: 4318]
10
<6>[ 9970.898575] [0: system_server: 4318]
1c200004
<6>[ 9970.898773] [0: system_server: 4318]
0
<6>[ 9970.898972] [0: system_server: 4318]

PM: Preparing system for mem sleep


exynos_dm_hotplug_notifier, 958 : d
nr_sleep_prepare_cpus : 4, tmp_nr_s
CPU7: shutdown
CPU6: shutdown
CPU5: shutdown
stopped thread_hotplug
MIF(1264000): set TMU_COLD: 725000
DISP(100000): set TMU_COLD: 650000
INT(400000): set TMU_COLD: 681250 =
tmu temperature state 0 to 1
mdm_hsic_pm_notify_event: block req
esoc REQ engine released from wait
Freezing user space processes ... (
Freezing remaining freezable tasks
PM: Entering mem sleep
Suspending console(s) (use no_conso
exynos-dwc3 15400000.usb: dwc3_exyn
[mhi_suspend] [mhi_suspend]
[mhi_suspend] Entered, sys state 2,
dhdpcie_send_mb_data: H2D_MB_DATA:
[mhi_initiate_m3] Entered MHI state
[mhi_initiate_m3] MHI state 5, link
dhdpcie_send_mb_data: send H2D_HOST
D2H_MB_DATA: 0x00000001
dhdpcie_handle_mb_data D2H_MB_DATA:
dhdpcie_send_mb_data: H2D_MB_DATA:
dhdpcie_send_mb_data: send H2D_HOST
dhdpcie_suspend_dev: Enter
pcieh 0001:01:00.0: reg offset: 0:
pcieh 0001:01:00.0: reg offset: 4:
pcieh 0001:01:00.0: reg offset: 8:
pcieh 0001:01:00.0: reg offset: 12:
pcieh 0001:01:00.0: reg offset: 16:
pcieh 0001:01:00.0: reg offset: 20:
pcieh 0001:01:00.0: reg offset: 24:

1c400004
<6>[ 9970.899201] [0: system_server:
0
<6>[ 9970.899553] [0: system_server:
0
<6>[ 9970.899770] [0: system_server:
0
<6>[ 9970.899978] [0: system_server:
0
<6>[ 9970.900186] [0: system_server:
77414e4
<6>[ 9970.900395] [0: system_server:
0
<6>[ 9970.900597] [0: system_server:
48
<6>[ 9970.900804] [0: system_server:
0
<6>[ 9970.901003] [0: system_server:
1ed
<6>[ 9970.901211] [0: system_server:
2c10
<6>[ 9970.901420] [0: system_server:
142
<6>[ 9970.901429] [0: system_server:
0
<6>[ 9970.901437] [0: system_server:
0
<6>[ 9970.901789] [0: system_server:
: 400
<6>[ 9970.902006] [0: system_server:
: 1
<6>[ 9970.902014] [0: system_server:
: 0
<6>[ 9970.904843] [0: system_server:
device_vendor_id reg : 43e914e4
<6>[ 9970.905040] [0: system_server:
PMCSR reg value: 4108
<6>[ 9970.905248] [0: system_server:
PMCSR reg value: 410b
<6>[ 9970.905424] [0: system_server:
device_vendor_id reg : 43e914e4
<6>[ 9970.916127] [0: system_server:
eg : 410b dev->current_state : 0
<6>[ 9970.916306] [0: system_server:
vendor_id reg : 43e914e4
<6>[ 9970.916328] [0: system_server:
0: a575144d
<6>[ 9970.916339] [0: system_server:
4: 100147
<6>[ 9970.916351] [0: system_server:
8: 6040001
<6>[ 9970.916362] [0: system_server:
12: 10010
<6>[ 9970.916373] [0: system_server:
16: 0
<6>[ 9970.916385] [0: system_server:
20: 0
<6>[ 9970.916397] [0: system_server:
24: 10100
<6>[ 9970.916409] [0: system_server:

4318] pcieh 0001:01:00.0: reg offset: 28:


4318] pcieh 0001:01:00.0: reg offset: 32:
4318] pcieh 0001:01:00.0: reg offset: 36:
4318] pcieh 0001:01:00.0: reg offset: 40:
4318] pcieh 0001:01:00.0: reg offset: 44:
4318] pcieh 0001:01:00.0: reg offset: 48:
4318] pcieh 0001:01:00.0: reg offset: 52:
4318] pcieh 0001:01:00.0: reg offset: 56:
4318] pcieh 0001:01:00.0: reg offset: 60:
4318] pcieh 0001:01:00.0: PCI_EXP_DEVCTL:
4318] pcieh 0001:01:00.0: PCI_EXP_LNKCTL:
4318] pcieh 0001:01:00.0: PCI_EXP_SLTCTL:
4318] pcieh 0001:01:00.0: PCI_EXP_RTCTL:
4318] pcieh 0001:01:00.0: PCI_EXP_DEVCTL2
4318] pcieh 0001:01:00.0: PCI_EXP_LNKCTL2
4318] pcieh 0001:01:00.0: PCI_EXP_SLTCTL2
4318] pcieh 0001:01:00.0: [debug] step 1,
4318] pcieh 0001:01:00.0: [debug] step 2,
4318] pcieh 0001:01:00.0: [debug] step 3,
4318] pcieh 0001:01:00.0: [debug] step 4,
4318] pcieh 0001:01:00.0: [debug] pmcsr r
4318] pcieh 0001:01:00.0: [debug] device_
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:

28: 0
<6>[ 9970.916420] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
32: 1ff01c00
<6>[ 9970.916432] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
36: 0
<6>[ 9970.916444] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
40: 0
<6>[ 9970.916456] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
44: 0
<6>[ 9970.916467] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
48: 0
<6>[ 9970.916615] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
52: 40
<6>[ 9970.916627] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
56: 0
<6>[ 9970.916639] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
60: 101ed
<6>[ 9970.916651] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL: 2010
<6>[ 9970.916663] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL: 42
<6>[ 9970.916671] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL: 0
<6>[ 9970.916683] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_RTCT
L: 0
<6>[ 9970.916694] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL2: 400
<6>[ 9970.916706] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL2: 1
<6>[ 9970.916714] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL2: 0
<6>[ 9970.916820] [0: system_server: 4318] exynos-pcie 15660000.pcie1: ack mes
sage is ok
<6>[ 9970.916830] [0: system_server: 4318] exynos-pcie 15660000.pcie1: receive
d Enter_L23_READY DLLP packet
<6>[ 9970.916844] [0: system_server: 4318] exynos-pcie 15660000.pcie1: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[ 9970.916910] [0: system_server: 4318] exynos-pcie 15660000.pcie1: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[ 9970.918017] [0: system_server: 4318] voltage(793750) + volt_offset(37500
) is bigger than max_volt(793750)
<6>[ 9970.918203] [0: system_server: 4318] voltage(793750) + volt_offset(37500
) is bigger than max_volt(793750)
<6>[ 9970.918926] [0: system_server: 4318] DEVFREQ(MIF): suspend voltage(79375
0 793750)
<6>[ 9970.920840] [0: system_server: 4318] s2m_rtc_update: RTC_UPDATE_REGISTER
check : 0x00
<6>[ 9970.920983] [0: system_server: 4318] s2m-rtc s2m-rtc: s2m_rtc_read_time:
2016-11-17 16:18:53(0x10)PM
<5>[ 9970.921177] [0: system_server: 4318] sd 0:0:0:0: [sda] Synchronizing SCS
I cache
<6>[ 9970.926017] [0: system_server: 4318] s2m_rtc_update: RTC_UPDATE_REGISTER
check : 0x00
<6>[ 9970.926167] [0: system_server: 4318] s2m-rtc s2m-rtc: s2m_rtc_read_time:
2016-11-17 16:18:53(0x10)PM
<6>[ 9970.927380] [0: system_server: 4318] s2m_rtc_update: RTC_UPDATE_REGISTER
check : 0x00
<6>[ 9970.927518] [0: system_server: 4318] s2m-rtc s2m-rtc: s2m_rtc_read_time:
2016-11-17 16:18:53(0x10)PM
<6>[ 9970.927532] [0: system_server: 4318] s2m-rtc s2m-rtc: s2m_rtc_set_alarm:

2016-11-17 16:19:08(0x10)PM
<6>[ 9970.928838] [0: system_server: 4318] s2m_rtc_update: RTC_UPDATE_REGISTER
check : 0x00
<6>[ 9970.930144] [0: system_server: 4318] s2m_rtc_update: RTC_UPDATE_REGISTER
check : 0x00
<6>[ 9970.930434] [0: system_server: 4318] max86900_pm_suspend
<6>[ 9970.930612] [0: system_server: 4318] wake enabled for irq 7
<2>[ 9970.930718] [0: system_server: 4318] --------Si47xx i2c driver Si47xx_su
spend called
<2>[ 9970.930726] [0: system_server: 4318] Si47xx_suspend: device not supporte
d
<6>[ 9970.930749] [0: system_server: 4318] [VIB] max77843_haptic_suspend
<6>[ 9970.930759] [0: system_server: 4318] [VIB] max77843_haptic_i2c 0
<6>[ 9970.931584] [0: system_server: 4318] wake enabled for irq 4
<6>[ 9970.931672] [0: system_server: 4318] vfsspi_regulator_onoff: ocp off, sm
c ret = 0
<6>[ 9970.931679] [0: system_server: 4318] vfsspi_regulator_onoff: off
<6>[ 9970.931695] [0: system_server: 4318] vfsspi_pm_suspend
<6>[ 9970.931732] [0: system_server: 4318] [SSP] ssp_suspend:
<6>[ 9970.938151] [0: system_server: 4318] [SSP] ssp_send_cmd: command 0xd4 0
<6>[ 9970.938284] [0: system_server: 4318] mst_ldo_device_suspend
<6>[ 9970.938329] [0: system_server: 4318] MST_LDO_DRV]]] suspend
<6>[ 9970.938335] [0: system_server: 4318] MST_LDO_DRV]]] suspend success afte
r smc : 122f122
<6>[ 9970.962957] [2: system_server: 4318] [MAX98505_DEBUG] max98505_suspend:
enter
<6>[ 9970.963034] [2: system_server: 4318] pacific-audio sound.34: pacific_sus
pend_post : set AIF1 port slave
<6>[ 9970.963086] [2: system_server: 4318] wake enabled for irq 577
<6>[ 9970.963095] [2: system_server: 4318] wake enabled for irq 580
<4>[ 9970.963113] [2: system_server: 4318] certify_hall_suspend start
<4>[ 9970.963125] [2: system_server: 4318] [keys] certify_hall_suspend certify
_status : 0 (detach)
<4>[ 9970.963138] [2: system_server: 4318] hall_suspend start
<4>[ 9970.963147] [2: system_server: 4318] [keys] hall_suspend flip_status : 1
(open)
<6>[ 9970.975588] [0: system_server: 4318] [MIF] usb_phy_prepare_shutdown
<6>[ 9970.975603] [0: system_server: 4318] dev rdy val = 1
<6>[ 9970.975610] [0: system_server: 4318] set_host_stat:set host port power s
tatus to [0]
<6>[ 9971.005575] [0: system_server: 4318] wait_dev_pwr_stat:[PWR OFF]...
<6>[ 9971.010896] I[0:
swapper/0:
0] mdm_device_ready_irq_handler, irq:
host ready val : 00000000
<6>[ 9971.010905] I[0:
swapper/0:
0] mdm_device_ready_irq_handler, irq:
dev ready val : 00000000
<6>[ 9971.032766] [4: system_server: 4318] done
<7>[ 9971.032808] [4: system_server: 4318] samsung-usb2phy 15530000.usb2phy: s
amsung_usb2phy_shutdown: End of setting for shutdown
<6>[ 9971.033042] [4: system_server: 4318] spi suspend is handled in device su
spend, dma mode = 0, bus_num = 3
<6>[ 9971.033062] [4: system_server: 4318] spi suspend is handled in device su
spend, dma mode = 0, bus_num = 1
<6>[ 9971.033159] [4: system_server: 4318] 3s3c24xx_serial_shutdown: port=4 res
et
<6>[ 9971.034153] [4: system_server: 4318] PM: suspend of devices complete aft
er 143.757 msecs
<6>[ 9971.034165] [4: system_server: 4318] ---Enabled regulators--<6>[ 9971.034186] [4: system_server: 4318] LDO1: 1200000uV, 0xffffffea mode, n
ull
<6>[ 9971.036053] [4: system_server: 4318] VDDIO_1.8V_COMP: 1800000uV, 0xfffff

fea mode, null


<6>[ 9971.036901] [4: system_server: 4318] VDDD_RET_1.0V_COMP: 700000uV, 0xfff
fffea mode, null
<6>[ 9971.038685] [4: system_server: 4318] VDD20_1P8_AP: 1800000uV, 0xffffffea
mode, null
<6>[ 9971.039299] [4: system_server: 4318] VCC_1.8V_CODEC_PMIC: 1800000uV, 0xf
fffffea mode, spi0.0-DBVDD1, spi0.0-AVDD, regulator.47-SUPPLY
<6>[ 9971.040747] [4: system_server: 4318] regulator-dummy: -22uV, 0xffffffea
mode, null
<6>[ 9971.040759] [4: system_server: 4318] Always On regulator count :10 [VDD2
2_1P1_2MIC][vdd_ldo8][vdd_mldo][vdd_lldo][vdd_disp_cam0][vdd_int][vdd_apollo][vd
d_atlas][vdd_mif][safeout1_range]
<6>[ 9971.040770] [4: system_server: 4318] ---Enabled regulator count: 16--<6>[ 9971.042541] [4: system_server: 4318] PM: late suspend of devices complet
e after 1.757 msecs
<6>[ 9971.043107] [4: system_server: 4318] pcieport 0001:00:00.0: reg offset:
0: ffffffff
<6>[ 9971.043123] [4: system_server: 4318] pcieport 0001:00:00.0: reg offset:
4: ffffffff
<6>[ 9971.043137] [4: system_server: 4318] pcieport 0001:00:00.0: reg offset:
8: ffffffff
<6>[ 9971.043150] [4: system_server: 4318] pcieport 0001:00:00.0: reg offset:
12: ffffffff
<6>[ 9971.043163] [4: system_server: 4318] pcieport 0001:00:00.0: reg offset:
16: ffffffff
<6>[ 9971.043176] [4: system_server: 4318] pcieport 0001:00:00.0: reg offset:
20: ffffffff
<6>[ 9971.043188] [4: system_server: 4318] pcieport 0001:00:00.0: reg offset:
24: ffffffff
<6>[ 9971.043201] [4: system_server: 4318] pcieport 0001:00:00.0: reg offset:
28: ffffffff
<6>[ 9971.043213] [4: system_server: 4318] pcieport 0001:00:00.0: reg offset:
32: ffffffff
<6>[ 9971.043225] [4: system_server: 4318] pcieport 0001:00:00.0: reg offset:
36: ffffffff
<6>[ 9971.043237] [4: system_server: 4318] pcieport 0001:00:00.0: reg offset:
40: ffffffff
<6>[ 9971.043249] [4: system_server: 4318] pcieport 0001:00:00.0: reg offset:
44: ffffffff
<6>[ 9971.043261] [4: system_server: 4318] pcieport 0001:00:00.0: reg offset:
48: ffffffff
<6>[ 9971.043273] [4: system_server: 4318] pcieport 0001:00:00.0: reg offset:
52: ffffffff
<6>[ 9971.043284] [4: system_server: 4318] pcieport 0001:00:00.0: reg offset:
56: ffffffff
<6>[ 9971.043297] [4: system_server: 4318] pcieport 0001:00:00.0: reg offset:
60: ffffffff
<6>[ 9971.043309] [4: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL: 0
<6>[ 9971.043321] [4: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL: 0
<6>[ 9971.043333] [4: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL: 0
<6>[ 9971.043344] [4: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_RTCT
L: 0
<6>[ 9971.043356] [4: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL2: 0
<6>[ 9971.043368] [4: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL2: 0
<6>[ 9971.043379] [4: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC

TL2: 0
<6>[ 9971.044085] [4: system_server: 4318] exynos-pcie 15660000.pcie1: RC1 alr
eady off
<6>[ 9971.044100] [4: system_server: 4318] exynos-pcie 10ee0000.pcie0: RC0 alr
eady off
<6>[ 9971.044196] [4: system_server: 4318] spi suspend is handled in suspend_n
oirq, dma mode = 1, bus_num = 4
<6>[ 9971.044213] [4: system_server: 4318] spi suspend is handled in suspend_n
oirq, dma mode = 1, bus_num = 0
<6>[ 9971.044379] [4: system_server: 4318] PM: noirq suspend of devices comple
te after 1.824 msecs
<4>[ 9971.044389] [4: system_server: 4318] Disabling non-boot CPUs ...
<6>[ 9971.044609] [4: system_server: 4318] MobiCore mcd: <- core_num=0x0000000
0, active_cpu=0x00000001
<6>[ 9971.044669] [1:
mc_fastcall: 1747] MobiCore mcd: CoreSwap ok 1 -> 0
<5>[ 9971.046244] [4: system_server: 4318] CPU1: shutdown
<5>[ 9971.048182] [4: system_server: 4318] CPU2: shutdown
<5>[ 9971.050132] [4: system_server: 4318] CPU3: shutdown
<5>[ 9971.051769] [0: system_server: 4318] CPU4: shutdown
<6>[ 9971.052460] [0: system_server: 4318] [MIF] 1552000Khz
<6>[ 9971.052460] [0: system_server: 4318] WAKEUP_STAT: 0x80000001
<6>[ 9971.052460] [0: system_server: 4318] EINT_PEND: 0x00, 0x40 0x00, 0x80
<6>[ 9971.052460] [0: system_server: 4318] Resume caused by IRQ 7, sec-pmic-ir
q
<6>[ 9971.052460] [0: system_server: 4318] Suspended for 0.000 seconds
<6>[ 9971.052639] [0: system_server: 4318] Enabling non-boot CPUs ...
<4>[ 9971.052791] [1:
swapper/1:
0] CPU1: Booted secondary processor
<6>[ 9971.053361] [0: system_server: 4318] MobiCore mcd: <- core_num=0x0000000
1, active_cpu=0x00000000
<6>[ 9971.053409] [0:
mc_fastcall: 1747] MobiCore mcd: CoreSwap ok 0 -> 1
<6>[ 9971.053446] [0: system_server: 4318] CPU1 is up
<4>[ 9971.053568] [2:
swapper/2:
0] CPU2: Booted secondary processor
<6>[ 9971.054087] [0: system_server: 4318] CPU2 is up
<4>[ 9971.054210] [3:
swapper/3:
0] CPU3: Booted secondary processor
<6>[ 9971.054841] [0: system_server: 4318] CPU3 is up
<4>[ 9971.055062] [4:
swapper/4:
0] CPU4: Booted secondary processor
<6>[ 9971.055865] [0: system_server: 4318] CPU4 is up
<6>[ 9971.056059] [0: system_server: 4318] spi resume is handled in resume_noi
rq, dma mode = 1, bus_num = 0
<6>[ 9971.056116] [0: system_server: 4318] spi resume is handled in resume_noi
rq, dma mode = 1, bus_num = 4
<6>[ 9971.069118] [1: system_server: 4318] pcieport 0001:00:00.0: [debug] pmcs
r reg : ffff dev->current_state : 3
<6>[ 9971.069132] [1: system_server: 4318] pcieport 0001:00:00.0: [debug] devi
ce_vendor_id reg : ffffffff
<6>[ 9971.069144] [1: system_server: 4318] pcieport 0001:00:00.0: Refused to c
hange power state, currently in D3, PCI_PM_CTRL=ffff
<6>[ 9971.069157] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL: 0
<6>[ 9971.069167] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL: 0
<6>[ 9971.069176] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL: 0
<6>[ 9971.069185] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_RTCT
L: 0
<6>[ 9971.069195] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL2: 0
<6>[ 9971.069205] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL2: 0
<6>[ 9971.069214] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC

TL2: 0
<6>[ 9971.069225] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x3c (was 0xffffffff, writing 0xffffffff)
<6>[ 9971.069237] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x38 (was 0xffffffff, writing 0xffffffff)
<6>[ 9971.069248] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x34 (was 0xffffffff, writing 0xffffffff)
<6>[ 9971.069258] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x30 (was 0xffffffff, writing 0xffffffff)
<6>[ 9971.069269] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x2c (was 0xffffffff, writing 0xffffffff)
<6>[ 9971.069280] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x28 (was 0xffffffff, writing 0xffffffff)
<6>[ 9971.069291] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x24 (was 0xffffffff, writing 0xffffffff)
<6>[ 9971.069302] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x20 (was 0xffffffff, writing 0xffffffff)
<6>[ 9971.069313] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x1c (was 0xffffffff, writing 0xffffffff)
<6>[ 9971.069323] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x18 (was 0xffffffff, writing 0xffffffff)
<6>[ 9971.069334] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x14 (was 0xffffffff, writing 0xffffffff)
<6>[ 9971.069345] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x10 (was 0xffffffff, writing 0xffffffff)
<6>[ 9971.069356] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0xc (was 0xffffffff, writing 0xffffffff)
<6>[ 9971.069367] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x8 (was 0xffffffff, writing 0xffffffff)
<6>[ 9971.069377] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x4 (was 0xffffffff, writing 0xffffffff)
<6>[ 9971.069388] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x0 (was 0xffffffff, writing 0xffffffff)
<6>[ 9971.069410] [1: system_server: 4318] pcieh 0001:01:00.0: [debug] step 1,
device_vendor_id reg : ffffffff
<6>[ 9971.069420] [1: system_server: 4318] pcieh 0001:01:00.0: [debug] step 2,
PMCSR reg value: ffff
<6>[ 9971.069429] [1: system_server: 4318] pcieh 0001:01:00.0: [debug] step 3,
PMCSR reg value: 0
<6>[ 9971.069439] [1: system_server: 4318] pcieh 0001:01:00.0: [debug] step 4,
device_vendor_id reg : ffffffff
<6>[ 9971.082427] [1: system_server: 4318] pcieh 0001:01:00.0: [debug] pmcsr r
eg : ffff dev->current_state : 3
<6>[ 9971.082437] [1: system_server: 4318] pcieh 0001:01:00.0: [debug] device_
vendor_id reg : ffffffff
<6>[ 9971.082448] [1: system_server: 4318] pcieh 0001:01:00.0: Refused to chan
ge power state, currently in D3, PCI_PM_CTRL=ffff
<6>[ 9971.082460] [1: system_server: 4318] exynos-pcie 15660000.pcie1: PCIE li
nk state is 0
<6>[ 9971.082470] [1: system_server: 4318] pcieh 0001:01:00.0: [debug] setp 5,
PMCSR reg value: ffff
<6>[ 9971.082480] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_DEVCTL:
2c10
<6>[ 9971.082489] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_LNKCTL:
142
<6>[ 9971.082499] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_SLTCTL:
0
<6>[ 9971.082508] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_RTCTL:
0
<6>[ 9971.082517] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_DEVCTL2

: 400
<6>[ 9971.082526] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_LNKCTL2
: 1
<6>[ 9971.082535] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_SLTCTL2
: 0
<6>[ 9971.082546] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x3c (was 0xffffffff, writing 0x1ed)
<6>[ 9971.082557] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x38 (was 0xffffffff, writing 0x0)
<6>[ 9971.082567] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x34 (was 0xffffffff, writing 0x48)
<6>[ 9971.082579] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x30 (was 0xffffffff, writing 0x0)
<6>[ 9971.082589] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x2c (was 0xffffffff, writing 0x77414e4)
<6>[ 9971.082600] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x28 (was 0xffffffff, writing 0x0)
<6>[ 9971.082611] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x24 (was 0xffffffff, writing 0x0)
<6>[ 9971.112582] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x20 (was 0xffffffff, writing 0x0)
<6>[ 9971.142114] [4: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x1c (was 0xffffffff, writing 0x0)
<6>[ 9971.172088] [4: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x18 (was 0xffffffff, writing 0x1c400004)
<6>[ 9971.202059] [4: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x14 (was 0xffffffff, writing 0x0)
<6>[ 9971.232029] [4: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x10 (was 0xffffffff, writing 0x1c200004)
<6>[ 9971.261999] [4: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0xc (was 0xffffffff, writing 0x10)
<6>[ 9971.262010] [4: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x8 (was 0xffffffff, writing 0x2800003)
<6>[ 9971.262020] [4: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x4 (was 0xffffffff, writing 0x100146)
<6>[ 9971.262030] [4: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x0 (was 0xffffffff, writing 0x43e914e4)
<6>[ 9971.272430] [4: system_server: 4318] pcieport 0000:00:00.0: [debug] pmcs
r reg : ffff dev->current_state : 3
<6>[ 9971.272440] [4: system_server: 4318] pcieport 0000:00:00.0: [debug] devi
ce_vendor_id reg : ffffffff
<6>[ 9971.272449] [4: system_server: 4318] pcieport 0000:00:00.0: Refused to c
hange power state, currently in D3, PCI_PM_CTRL=ffff
<6>[ 9971.285754] [4: system_server: 4318] mhi 0000:01:00.0: [debug] pmcsr reg
: ffff dev->current_state : 3
<6>[ 9971.285764] [4: system_server: 4318] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : ffffffff
<6>[ 9971.285773] [4: system_server: 4318] mhi 0000:01:00.0: Refused to change
power state, currently in D3, PCI_PM_CTRL=ffff
<6>[ 9971.285890] [4: system_server: 4318] PM: noirq resume of devices complet
e after 230.010 msecs
<6>[ 9971.286275] [4: system_server: 4318] exynos-mailbox 11240000.mailbox: Lo
ading APM firmware ...
<6>[ 9971.286436] [4: system_server: 4318] OK
<6>[ 9971.287549] [4: system_server: 4318] PM: early resume of devices complet
e after 1.380 msecs
<6>[ 9971.287666] [1: kworker/u16:21:32544] [mhi_resume] [mhi_resume]
<6>[ 9971.287681] [1: kworker/u16:21:32544] [mhi_initiate_m0] Entered MHI state
5, Pending M0 0 Pending M3 0
<6>[ 9971.287693] [1: kworker/u16:21:32544] [mhi_initiate_m0] Waiting for M0 M1

or M3. Currently 5...


<6>[ 9971.287703] [1: kworker/u16:21:32544] [mhi_initiate_m0] Wait complete sta
te: 5
<6>[ 9971.287712] [1: kworker/u16:21:32544] [mhi_turn_on_pcie_link] Entered...
<6>[ 9971.287726] [1: kworker/u16:21:32544] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, start of poweron, pcie state: 0
<6>[ 9971.287811] [4: system_server: 4318] s3c2410_wdt: watchdog enabled
<6>[ 9971.291131] [4: system_server: 4318] spi resume is handled in device res
ume, dma mode = 0, bus_num = 1
<6>[ 9971.291161] [4: system_server: 4318] spi resume is handled in device res
ume, dma mode = 0, bus_num = 3
<7>[ 9971.291369] [4: system_server: 4318] samsung-usb2phy 15530000.usb2phy: C
an't configure specified phy mode
<7>[ 9971.291387] [4: system_server: 4318] samsung-usb2phy 15530000.usb2phy: e
nd of samsung_usb2phy_init
<7>[ 9971.291399] [4: system_server: 4318] samsung-usb2phy 15530000.usb2phy: s
amsung_usb2phy_runtime_resume
<4>[ 9971.291418] [4: system_server: 4318] usb usb1: root hub lost power or wa
s reset
<7>[ 9971.291437] [4: system_server: 4318] s5p-ehci 15510000.usb: reset comman
d 0080b02 park=3 ithresh=8 period=1024 Reset HALT
<6>[ 9971.291452] [4: system_server: 4318] dev rdy val = 0
<6>[ 9971.291458] [4: system_server: 4318] set_host_stat:set host port power s
tatus to [1]
<6>[ 9971.291468] [4: system_server: 4318] wait_dev_pwr_stat:[PWR ON]...
<6>[ 9971.308606] I[0:
swapper/0:
0] mdm_device_ready_irq_handler, irq:
host ready val : 00000001
<6>[ 9971.308618] I[0:
swapper/0:
0] mdm_device_ready_irq_handler, irq:
dev ready val : 00000001
<6>[ 9971.321429] [4: system_server: 4318] done
<7>[ 9971.321472] [0: kworker/u16:29:32553] usb usb1: usb resume
<7>[ 9971.321488] [0: kworker/u16:29:32553] s5p-ehci 15510000.usb: resume root
hub after power loss
<7>[ 9971.321499] [0: kworker/u16:29:32553] s5p-ehci 15510000.usb: LRESET 0
<7>[ 9971.321522] [0: kworker/u16:29:32553] hub 1-0:1.0: hub_reset_resume
<7>[ 9971.321534] [0: kworker/u16:29:32553] hub 1-0:1.0: enabling power on all
ports
<6>[ 9971.326105] [1: kworker/u16:21:32544] exynos-pcie 10ee0000.pcie0: D state
: 0, cc1f00
<6>[ 9971.339406] [1: kworker/u16:21:32544] exynos-pcie 10ee0000.pcie0: exynos_
pcie_reset: Link up : 0x03593011
<6>[ 9971.339632] [1: kworker/u16:21:32544] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, end of poweron, pcie state: 3
<7>[ 9971.352459] [0: kworker/u16:29:32553] s5p-ehci 15510000.usb: GetStatus po
rt:2 status 001803 0 ACK POWER sig=j CSC CONNECT
<7>[ 9971.352472] [0: kworker/u16:29:32553] hub 1-0:1.0: port 2: status 0501 ch
ange 0001
<7>[ 9971.352541] [0: kworker/u16:8:32451] usb 1-2: finish reset-resume
<6>[ 9971.352635] [1: kworker/u16:21:32544] mhi 0000:01:00.0: [debug] pmcsr reg
: 8 dev->current_state : 3
<6>[ 9971.352817] [1: kworker/u16:21:32544] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9971.352829] [1: kworker/u16:21:32544] exynos-pcie 10ee0000.pcie0: Recover
y for the link of RC0
<6>[ 9971.352839] [1: kworker/u16:21:32544] exynos-pcie 10ee0000.pcie0: Recover
config space of RC0 and its EP
<6>[ 9971.352849] [1: kworker/u16:21:32544] exynos-pcie 10ee0000.pcie0: Recover
RC0
<6>[ 9971.352877] [1: kworker/u16:21:32544] exynos-pcie 10ee0000.pcie0: Recover
EP of RC0

<6>[ 9971.353273] [1: kworker/u16:21:32544] exynos-pcie 10ee0000.pcie0: Refresh


ing the saved config space in PCI framework for RC0 and its EP
<6>[ 9971.358498] [1: kworker/u16:21:32544] [mhi_turn_on_pcie_link] Exited...
<6>[ 9971.358511] [1: kworker/u16:21:32544] [mhi_initiate_m0] Setting M0 ...
<6>[ 9971.358663] [1: kworker/u16:21:32544] [mhi_initiate_m0] Exited...
<6>[ 9971.362707] [0: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 5 link 1, ring type 2, index 0 db 0x5fa26f00
<6>[ 9971.362721] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9971.362753] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9971.362764] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9971.362774] [2:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9971.363254] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9971.363263] [1: kworker/u16:21:32544] [mhi_resume] Wait complete state: 2
<4>[ 9971.373803] [0: system_server: 4318] ufs_get_device_info: UNIQUE NUMBER
= 02157df271b5cb31 , LT: 0x22
<6>[ 9971.377510] [0: system_server: 4318] exynos-ufs 15570000.ufs: Power mode
change(0): M(1)G(2)L(2)HS-series(2)
<4>[ 9971.377852] [0: system_server: 4318] hall_resume start
<4>[ 9971.377862] [0: system_server: 4318] [keys] hall_resume flip_status : 1
(open)
<4>[ 9971.377875] [0: system_server: 4318] certify_hall_resume start
<4>[ 9971.377884] [0: system_server: 4318] [keys] certify_hall_resume certify_
status : 0 (detach)
<6>[ 9971.377903] [0: system_server: 4318] wake disabled for irq 577
<6>[ 9971.377912] [0: system_server: 4318] wake disabled for irq 580
<6>[ 9971.378038] [0:
kworker/0:2:31050] [MAX98505_DEBUG] max98505_resume: e
nter
<6>[ 9971.379175] [1: system_server: 4318] mst_ldo_device_resume
<6>[ 9971.379209] [1: system_server: 4318] MST_LDO_DRV]]] resume
<6>[ 9971.379215] [1: system_server: 4318] MST_LDO_DRV]]] resume success after
smc : 122f122
<6>[ 9971.380356] [0: system_server: 4318] [SSP] ssp_resume:
<6>[ 9971.387688] [2: system_server: 4318] [SSP] ssp_send_cmd: command 0xd3 0
<3>[ 9971.387717] [2: system_server: 4318] vfsspi_wakeup_daemon send signal fa
iled by wakeup(0)
<6>[ 9971.387748] [2: system_server: 4318] vfsspi_regulator_onoff: ocp on, smc
ret = 0
<6>[ 9971.390799] [2: system_server: 4318] vfsspi_regulator_onoff: on
<6>[ 9971.390813] [2: system_server: 4318] vfsspi_pm_resume
<6>[ 9971.390861] [2: system_server: 4318] wake disabled for irq 4
<6>[ 9971.390894] [2: system_server: 4318] [VIB] max77843_haptic_resume
<2>[ 9971.390909] [2: system_server: 4318] Si47xx_resume: device not supported
<6>[ 9971.390927] [2: system_server: 4318] wake disabled for irq 7
<6>[ 9971.391128] [2: system_server: 4318] max86900_pm_resume
<6>[ 9971.391138] [0:irq/7-sec-pmic-: 794] s2m-rtc s2m-rtc: s2m_rtc_alarm_irq:
irq(550)
<6>[ 9971.392897] [0:
kworker/0:3:22917] s2m_rtc_update: RTC_UPDATE_REGISTER
check : 0x00
<6>[ 9971.393027] [0:
kworker/0:3:22917] s2m-rtc s2m-rtc: s2m_rtc_read_time:
2016-11-17 16:19:08(0x10)PM
<6>[ 9971.394265] [2: system_server: 4318] s2m_rtc_update: RTC_UPDATE_REGISTER
check : 0x00
<6>[ 9971.394397] [2: system_server: 4318] s2m-rtc s2m-rtc: s2m_rtc_read_time:
2016-11-17 16:19:08(0x10)PM
<6>[ 9971.395865] [2: system_server: 4318] exynos-pcie 15660000.pcie1: exynos_
pcie_poweron, start of poweron, pcie state: 0
<7>[ 9971.405899] [0: kworker/u16:8:32451] s5p-ehci 15510000.usb: port 2 reset

complete, port enabled


<7>[ 9971.405919] [0: kworker/u16:8:32451] s5p-ehci 15510000.usb: GetStatus po
rt:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
<6>[ 9971.416415] [2: system_server: 4318] exynos-pcie 15660000.pcie1: D state
: 0, fb5700
<6>[ 9971.417796] [2: system_server: 4318] exynos-pcie 15660000.pcie1: exynos_
pcie_reset: Link up : 0x03e49e11
<6>[ 9971.417886] [2: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL: 2010
<6>[ 9971.417898] [2: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL: 42
<6>[ 9971.417908] [2: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL: 0
<6>[ 9971.418049] [2: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_RTCT
L: 0
<6>[ 9971.418062] [2: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL2: 400
<6>[ 9971.418074] [2: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL2: 1
<6>[ 9971.418083] [2: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL2: 0
<6>[ 9971.418098] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x3c (was 0x1ff, writing 0x101ed)
<6>[ 9971.418114] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x38 (was 0x0, writing 0x0)
<6>[ 9971.418127] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x34 (was 0x40, writing 0x40)
<6>[ 9971.418141] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x30 (was 0x0, writing 0x0)
<6>[ 9971.418154] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x2c (was 0x0, writing 0x0)
<6>[ 9971.418167] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x28 (was 0x0, writing 0x0)
<6>[ 9971.418181] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x24 (was 0x0, writing 0x0)
<6>[ 9971.418194] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x20 (was 0x1ff01c00, writing 0x1ff01c00)
<6>[ 9971.418207] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x1c (was 0x0, writing 0x0)
<6>[ 9971.418220] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x18 (was 0x10100, writing 0x10100)
<6>[ 9971.418233] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x14 (was 0x0, writing 0x0)
<6>[ 9971.418247] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x10 (was 0x0, writing 0x0)
<6>[ 9971.418260] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0xc (was 0x10000, writing 0x10010)
<6>[ 9971.418276] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x8 (was 0x1, writing 0x6040001)
<6>[ 9971.418292] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x4 (was 0x100107, writing 0x100147)
<6>[ 9971.418308] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x0 (was 0xa575144d, writing 0xa575144d)
<6>[ 9971.418340] [2: system_server: 4318] exynos-pcie 15660000.pcie1: exynos_
pcie_poweron, end of poweron, pcie state: 3
<4>[ 9971.418351] [2: system_server: 4318] dhdpcie_resume_dev: Enter
<6>[ 9971.418711] [2: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_DEVCTL:
2c10
<6>[ 9971.418795] [2: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_LNKCTL:
142

<6>[ 9971.418804] [2: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_SLTCTL:


0
<6>[ 9971.418813] [2: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_RTCTL:
0
<6>[ 9971.419135] [0: kworker/u16:8:32451] usb 1-2: reset high-speed USB devic
e number 2 using s5p-ehci
<6>[ 9971.419184] [2: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_DEVCTL2
: 400
<6>[ 9971.419540] [2: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_LNKCTL2
: 1
<6>[ 9971.419549] [2: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_SLTCTL2
: 0
<6>[ 9971.419633] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x3c (was 0x100, writing 0x1ed)
<6>[ 9971.419796] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x38 (was 0x0, writing 0x0)
<6>[ 9971.419881] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x34 (was 0x48, writing 0x48)
<6>[ 9971.419967] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x30 (was 0x0, writing 0x0)
<6>[ 9971.420050] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x2c (was 0x77414e4, writing 0x77414e4)
<6>[ 9971.420134] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x28 (was 0x0, writing 0x0)
<6>[ 9971.420212] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x24 (was 0x0, writing 0x0)
<6>[ 9971.420297] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x20 (was 0x0, writing 0x0)
<6>[ 9971.420383] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x1c (was 0x0, writing 0x0)
<6>[ 9971.420461] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x18 (was 0x4, writing 0x1c400004)
<6>[ 9971.420627] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x18 (writing 0x1c400004)
<6>[ 9971.420712] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x14 (was 0x0, writing 0x0)
<6>[ 9971.420798] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x10 (was 0x4, writing 0x1c200004)
<6>[ 9971.420966] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x10 (writing 0x1c200004)
<6>[ 9971.421054] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0xc (was 0x0, writing 0x10)
<6>[ 9971.421217] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x8 (was 0x2800003, writing 0x2800003)
<6>[ 9971.421303] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x4 (was 0x100000, writing 0x100146)
<6>[ 9971.421473] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x0 (was 0x43e914e4, writing 0x43e914e4)
<4>[ 9971.422746] [2: system_server: 4318] dhdpcie_send_mb_data: H2D_MB_DATA:
0x00000010
<4>[ 9971.422816] [2: system_server: 4318] dhdpcie_send_mb_data: send H2D_HOST
_D0_INFORM to dongle
<7>[ 9971.437184] [0: kworker/u16:8:32451] usb 1-2: USB quirks for this device
: 100
<6>[ 9971.441855] [0: kworker/u16:8:32451] [CHKRA:5]>
<6>[ 9971.442140] [2: system_server: 4318] PM: resume of devices complete afte
r 154.579 msecs
<6>[ 9971.442650] I[0:
swapper/0:
0] [NACB:5]<
<6>[ 9971.442660] I[0:
swapper/0:
0] notification_available_cb: set lpa
handling to false

<6>[ 9971.442676] I[0:


swapper/0:
0]
<7>[ 9971.444338] [0:
kworker/0:2:31050]
to (270, 0x1b00)
<6>[ 9971.444692] [0:
kworker/0:2:31050]
0_REG(0x1603), QRTABLE30_REG(0x1005)
<7>[ 9971.445499] [2: system_server: 4318]
<6>[ 9971.446081] [0:
kworker/0:2:31050]
changed
<6>[ 9971.446102] [0:
kworker/0:2:31050]
Tbat:270)
<7>[ 9971.446132] [3:
khubd: 742]
04 evt 0000
<6>[ 9971.446170] [3:
khubd: 742]
hange 0000, 480 Mb/s
<6>[ 9971.446188] [0:
kworker/0:2:31050]
os_runtime_suspend
<6>[ 9971.446449] [0:
kworker/0:2:31050]
sleep_mode = 0
<6>[ 9971.446476] [0:
kworker/0:2:31050]

[CHKRA:5]>
max77843_fg_write_temp: temperature

<3>[ 9971.449202] [3:


mdm_helper: 3355]
<6>[ 9971.450824] [1:
argosd: 3378]
d:29Mbps, prev level:0, request level:-1
<4>[ 9971.445512] [2: system_server: 4318]
<6>[ 9971.453204] [1:onic.tuiservice: 659]

esoc REQ enginer waiting on request


argos_pm_qos_notify: name:UFS, spee

max77843_fg_check_qrtable: QRTABLE2
PM: Finishing wakeup.
power_supply battery: power_supply_
Skip monitor work(36, Vnow:4083mV,
hub 1-0:1.0: state 7 ports 2 chg 00
hub 1-0:1.0: port 2, status 0503, c
exynos-dwc3 15400000.usb: dwc3_exyn
sec_bat_get_property cable type = 1
sec_bat_get_property cable type = 1

Restarting tasks ... done.


t-base-tui module: ioctl 0x80047402

<6>[ 9971.453222] [1:onic.tuiservice: 659] TUI_IO_WAITCMD


<6>[ 9971.453588] [0:
argosd: 3378] argos_freq_unlock name:UFS
<6>[ 9971.454151] [0: thread_hotplug:18127] frequency info : 1200000, prev_cmd
1, exe_cmd 4
<6>[ 9971.454172] [0: thread_hotplug:18127] lcd is on : 0, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9971.454184] [0: thread_hotplug:18127] cluster1 cores hotplug out : 0
<6>[ 9971.461292] [1: system_server: 4318] mdm_hsic_pm_notify_event: unblock r
equest
<6>[ 9971.461319] [1: system_server: 4318] request_active_lock_set
<6>[ 9971.461416] [2: system_server: 4318] PM: suspend exit 2016-11-17 16:19:0
8.683242521 UTC
<6>[ 9971.463336] [2:
healthd: 3346] sec_bat_get_property cable type = 1
sleep_mode = 0
<12>[ 9971.464105] [2:
healthd: 3346] healthd: battery l=98 v=4083 t=27.
0 h=2 st=3 c=0 o=1 ca=-403 ct=0 ps=0 chg= 2016-11-17 16:19:08.685565271 UTC
<12>[ 9971.464163] [2:
healthd: 3346] healthd: battery l=98 v=4083 t=27.
0 h=2 st=3 c=0 o=1 ca=-403 ct=0 ps=0 chg= 2016-11-17 16:19:08.685565271 UTC hv=0
sec=0 chg=
<14>[ 9971.464189] [2:
healthd: 3346] healthd-android: healthd_mode_andr
oid_battery_update
<14>[ 9971.464214] [2:
healthd: 3346] BatteryPropertiesRegistrar: notify
Listeners : start
<14>[ 9971.464402] [2:
healthd: 3346] IBatteryPropertiesListener : batte
ryPropertiesChanged!
<14>[ 9971.464402] [2:
healthd: 3346] : BatteryPropertiesRegistrar: noti
fyListeners : done
<6>[ 9971.479167] [1: kworker/u16:11:32455] mdm_hsic_rpm_check
<6>[ 9971.479203] [1: kworker/u16:11:32455] mdm_hsic_rpm_restart
<6>[ 9971.575120] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9971.575292] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[ 9971.575316] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Processing

M1 state transition from state 3


<6>[ 9971.575344] [2:MHI_STATE_THREA: 4605]
ansition to M2
<6>[ 9971.575546] [2:MHI_STATE_THREA: 4605]
deferred work
<7>[ 9971.955523] [0:
kworker/0:2:31050]
<6>[ 9971.960617] [1:
kworker/1:4:14113]
=> (set_volt: 575000, get_volt: 575000)
<6>[ 9971.961702] [1:
kworker/1:4:14113]
volt: 650000, get_volt: 650000)
<6>[ 9971.963205] [1:
kworker/1:4:14113]
=> 650000
<6>[ 9971.963253] [1:
kworker/1:4:14113]
emp : 32
<7>[ 9971.965879] [0:
kworker/0:2:31050]
<7>[ 9971.965953] [0:
kworker/0:2:31050]
1
<7>[ 9971.966004] [0:
kworker/0:2:31050]
hub
<3>[ 9971.967060] [0:
kworker/0:2:31050]
time_suspend
<7>[ 9971.979301] [0:
kworker/0:2:31050]
amsung_usb2phy_runtime_suspend
<6>[ 9971.979369] [0:
kworker/0:2:31050]
<6>[ 9971.979415] [0:
kworker/0:2:31050]
child=0
<6>[ 9972.142717] [3: system_server: 4318]
09.364537256 UTC
<6>[ 9972.142752] [3: system_server: 4318]
<7>[ 9972.159210] [3: system_server: 4318]
<6>[ 9972.159301] [0: system_server: 4318]
ynamic_hotplug CMD_SLEEP_PREPARE
<6>[ 9972.159325] [0: system_server: 4318]
leep_prepare_cpus : 5
<6>[ 9972.159358] [0: thread_hotplug:18127]
<6>[ 9972.166411] [0: system_server: 4318]
> (set_volt: 675000, get_volt: 675000)
<6>[ 9972.167168] [0: system_server: 4318]
=> (set_volt: 687500, get_volt: 687500)
<6>[ 9972.168064] [0: system_server: 4318]
> 687500
<6>[ 9972.168096] [0: system_server: 4318]
<6>[ 9972.168122] [0: system_server: 4318]
uest
<3>[ 9972.169577] [3:
mdm_helper: 3355]
<4>[ 9972.169238] [0: system_server: 4318]
elapsed 0.005 seconds) done.
<4>[ 9972.174675] [0: system_server: 4318]
... (elapsed 0.006 seconds) done.
<7>[ 9972.181037] [0: system_server: 4318]
<4>[ 9972.181057] [0: system_server: 4318]
le_suspend to debug)
<6>[ 9972.182347] [0: system_server: 4318]
os_runtime_resume
<6>[ 9972.183851] [1: kworker/u16:33:32557]
<6>[ 9972.183879] [1: kworker/u16:33:32557]
MHI state 4
<4>[ 9972.183893] [0: system_server: 4318]
0x00000001
<6>[ 9972.183906] [1: kworker/u16:33:32557]

[process_M1_transition] Allowing tr
[process_M1_transition] Starting M3
usb 1-2: usb auto-suspend, wakeup 1
MIF(418000): unset TMU_COLD: 612500
DISP(100000): unset TMU_COLD: (set_
INT(100000): unset TMU_COLD: 687500
tmu temperature state 1 to 0, cur_t
hub 1-0:1.0: hub_suspend
usb usb1: bus auto-suspend, wakeup
s5p-ehci 15510000.usb: suspend root
s5p-ehci 15510000.usb: s5p_ehci_run
samsung-usb2phy 15530000.usb2phy: s
request_active_lock_release
s5p_ehci_runtime_suspend: usage=0,
PM: suspend entry 2016-11-17 16:19:
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
exynos_dm_hotplug_notifier, 958 : d
nr_sleep_prepare_cpus : 4, tmp_nr_s
stopped thread_hotplug
MIF(635000): set TMU_COLD: 637500 =
DISP(100000): set TMU_COLD: 650000
INT(100000): set TMU_COLD: 650000 =
tmu temperature state 0 to 1
mdm_hsic_pm_notify_event: block req
esoc REQ engine released from wait
Freezing user space processes ... (
Freezing remaining freezable tasks
PM: Entering mem sleep
Suspending console(s) (use no_conso
exynos-dwc3 15400000.usb: dwc3_exyn
[mhi_suspend] [mhi_suspend]
[mhi_suspend] Entered, sys state 2,
dhdpcie_send_mb_data: H2D_MB_DATA:
[mhi_initiate_m3] Entered MHI state

4, Pending M0 0 Pending M3 0
<6>[ 9972.183921] [1: kworker/u16:33:32557] [mhi_initiate_m3] Triggering wake o
ut of M2
<4>[ 9972.184250] [0: system_server: 4318] dhdpcie_send_mb_data: send H2D_HOST
_D3_INFORM to dongle
<4>[ 9972.185675] I[0:
swapper/0:
0] D2H_MB_DATA: 0x00000001
<4>[ 9972.185690] I[0:
swapper/0:
0] dhdpcie_handle_mb_data D2H_MB_DATA:
Received D3 ACK
<4>[ 9972.185763] [1: system_server: 4318] dhdpcie_send_mb_data: H2D_MB_DATA:
0x00000008
<4>[ 9972.186040] [1: system_server: 4318] dhdpcie_send_mb_data: send H2D_HOST
_D0_INFORM_IN_USE to dongle
<4>[ 9972.186063] [1: system_server: 4318] dhdpcie_suspend_dev: Enter
<6>[ 9972.186093] [0: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26f20
<6>[ 9972.186112] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9972.186148] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9972.186165] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9972.186179] [2:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work was
cancelled
<6>[ 9972.186466] [1: system_server: 4318] pcieh 0001:01:00.0: reg offset: 0:
43e914e4
<6>[ 9972.186786] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9972.186799] [3: kworker/u16:33:32557] [mhi_initiate_m3] Cancelled M1 time
r, timer was active
<6>[ 9972.186841] [1: system_server: 4318] pcieh 0001:01:00.0: reg offset: 4:
100146
<6>[ 9972.186955] [3: kworker/u16:33:32557] [mhi_initiate_m3] Waiting for M3 co
mpletion.
<6>[ 9972.187218] [1: system_server: 4318] pcieh 0001:01:00.0: reg offset: 8:
2800003
<6>[ 9972.187593] [1: system_server: 4318] pcieh 0001:01:00.0: reg offset: 12:
10
<6>[ 9972.187968] [1: system_server: 4318] pcieh 0001:01:00.0: reg offset: 16:
1c200004
<6>[ 9972.188344] [1: system_server: 4318] pcieh 0001:01:00.0: reg offset: 20:
0
<6>[ 9972.188719] [1: system_server: 4318] pcieh 0001:01:00.0: reg offset: 24:
1c400004
<6>[ 9972.189115] [1: system_server: 4318] pcieh 0001:01:00.0: reg offset: 28:
0
<6>[ 9972.189492] [1: system_server: 4318] pcieh 0001:01:00.0: reg offset: 32:
0
<6>[ 9972.189868] [1: system_server: 4318] pcieh 0001:01:00.0: reg offset: 36:
0
<6>[ 9972.190242] [1: system_server: 4318] pcieh 0001:01:00.0: reg offset: 40:
0
<6>[ 9972.190618] [1: system_server: 4318] pcieh 0001:01:00.0: reg offset: 44:
77414e4
<6>[ 9972.190994] [1: system_server: 4318] pcieh 0001:01:00.0: reg offset: 48:
0
<6>[ 9972.191369] [1: system_server: 4318] pcieh 0001:01:00.0: reg offset: 52:
48
<6>[ 9972.191745] [1: system_server: 4318] pcieh 0001:01:00.0: reg offset: 56:
0
<6>[ 9972.192121] [1: system_server: 4318] pcieh 0001:01:00.0: reg offset: 60:
1ed
<6>[ 9972.192567] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_DEVCTL:

2c10
<6>[ 9972.192944] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_LNKCTL:
142
<6>[ 9972.192957] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_SLTCTL:
0
<6>[ 9972.192970] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_RTCTL:
0
<6>[ 9972.193348] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_DEVCTL2
: 400
<6>[ 9972.193723] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_LNKCTL2
: 1
<6>[ 9972.193736] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_SLTCTL2
: 0
<6>[ 9972.196310] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9972.196338] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 5
<6>[ 9972.196354] [2:MHI_STATE_THREA: 4605] [process_M3_transition] Processing
M3 state transition
<6>[ 9972.196386] [3: kworker/u16:33:32557] [mhi_initiate_m3] M3 completion rec
eived
<6>[ 9972.196408] [3: kworker/u16:33:32557] [mhi_turn_off_pcie_link] Entered...
<6>[ 9972.196795] [1: system_server: 4318] pcieh 0001:01:00.0: [debug] step 1,
device_vendor_id reg : 43e914e4
<6>[ 9972.196999] [1: system_server: 4318] pcieh 0001:01:00.0: [debug] step 2,
PMCSR reg value: 4108
<6>[ 9972.197208] [1: system_server: 4318] pcieh 0001:01:00.0: [debug] step 3,
PMCSR reg value: 410b
<6>[ 9972.197374] [1: system_server: 4318] pcieh 0001:01:00.0: [debug] step 4,
device_vendor_id reg : 43e914e4
<6>[ 9972.209476] [1: system_server: 4318] pcieh 0001:01:00.0: [debug] pmcsr r
eg : 410b dev->current_state : 0
<6>[ 9972.209589] [3: kworker/u16:33:32557] mhi 0000:01:00.0: [debug] pmcsr reg
: b dev->current_state : 0
<6>[ 9972.209828] [1: system_server: 4318] pcieh 0001:01:00.0: [debug] device_
vendor_id reg : 43e914e4
<6>[ 9972.209952] [3: kworker/u16:33:32557] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9972.209964] [1: system_server: 4318] pcieport 0001:00:00.0: reg offset:
0: a575144d
<6>[ 9972.210028] [3: kworker/u16:33:32557] exynos-pcie 10ee0000.pcie0: ack mes
sage is ok
<6>[ 9972.210043] [3: kworker/u16:33:32557] exynos-pcie 10ee0000.pcie0: receive
d Enter_L23_READY DLLP packet
<6>[ 9972.210065] [3: kworker/u16:33:32557] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[ 9972.210113] [1: system_server: 4318] pcieport 0001:00:00.0: reg offset:
4: 100147
<6>[ 9972.210131] [1: system_server: 4318] pcieport 0001:00:00.0: reg offset:
8: 6040001
<6>[ 9972.210149] [1: system_server: 4318] pcieport 0001:00:00.0: reg offset:
12: 10010
<6>[ 9972.210167] [1: system_server: 4318] pcieport 0001:00:00.0: reg offset:
16: 0
<6>[ 9972.210179] [3: kworker/u16:33:32557] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[ 9972.210190] [1: system_server: 4318] pcieport 0001:00:00.0: reg offset:
20: 0
<6>[ 9972.210207] [1: system_server: 4318] pcieport 0001:00:00.0: reg offset:
24: 10100

<6>[ 9972.210225] [1: system_server: 4318] pcieport 0001:00:00.0: reg offset:


28: 0
<6>[ 9972.210243] [1: system_server: 4318] pcieport 0001:00:00.0: reg offset:
32: 1ff01c00
<6>[ 9972.210261] [1: system_server: 4318] pcieport 0001:00:00.0: reg offset:
36: 0
<6>[ 9972.210279] [1: system_server: 4318] pcieport 0001:00:00.0: reg offset:
40: 0
<6>[ 9972.210297] [1: system_server: 4318] pcieport 0001:00:00.0: reg offset:
44: 0
<6>[ 9972.210451] [1: system_server: 4318] pcieport 0001:00:00.0: reg offset:
48: 0
<6>[ 9972.210469] [1: system_server: 4318] pcieport 0001:00:00.0: reg offset:
52: 40
<6>[ 9972.210487] [1: system_server: 4318] pcieport 0001:00:00.0: reg offset:
56: 0
<6>[ 9972.210505] [1: system_server: 4318] pcieport 0001:00:00.0: reg offset:
60: 101ed
<6>[ 9972.210524] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL: 2010
<6>[ 9972.210541] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL: 42
<6>[ 9972.210554] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL: 0
<6>[ 9972.210571] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_RTCT
L: 0
<6>[ 9972.210588] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL2: 400
<6>[ 9972.210606] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL2: 1
<6>[ 9972.210618] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL2: 0
<6>[ 9972.210986] [1: system_server: 4318] exynos-pcie 15660000.pcie1: ack mes
sage is ok
<6>[ 9972.211001] [1: system_server: 4318] exynos-pcie 15660000.pcie1: receive
d Enter_L23_READY DLLP packet
<6>[ 9972.211020] [1: system_server: 4318] exynos-pcie 15660000.pcie1: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[ 9972.211116] [1: system_server: 4318] exynos-pcie 15660000.pcie1: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[ 9972.213280] [0: system_server: 4318] voltage(793750) + volt_offset(37500
) is bigger than max_volt(793750)
<6>[ 9972.213318] [0: system_server: 4318] voltage(793750) + volt_offset(37500
) is bigger than max_volt(793750)
<6>[ 9972.214418] [0: system_server: 4318] DEVFREQ(MIF): suspend voltage(79375
0 793750)
<6>[ 9972.216473] [0: system_server: 4318] s2m_rtc_update: RTC_UPDATE_REGISTER
check : 0x00
<6>[ 9972.216635] [0: system_server: 4318] s2m-rtc s2m-rtc: s2m_rtc_read_time:
2016-11-17 16:19:09(0x10)PM
<5>[ 9972.216877] [0: system_server: 4318] sd 0:0:0:0: [sda] Synchronizing SCS
I cache
<6>[ 9972.221801] [0: system_server: 4318] s2m_rtc_update: RTC_UPDATE_REGISTER
check : 0x00
<6>[ 9972.221946] [0: system_server: 4318] s2m-rtc s2m-rtc: s2m_rtc_read_time:
2016-11-17 16:19:09(0x10)PM
<6>[ 9972.223179] [0: system_server: 4318] s2m_rtc_update: RTC_UPDATE_REGISTER
check : 0x00
<6>[ 9972.223332] [0: system_server: 4318] s2m-rtc s2m-rtc: s2m_rtc_read_time:
2016-11-17 16:19:09(0x10)PM

<6>[ 9972.223352] [0: system_server: 4318] s2m-rtc s2m-rtc: s2m_rtc_set_alarm:


2016-11-17 16:19:18(0x10)PM
<6>[ 9972.224693] [0: system_server: 4318] s2m_rtc_update: RTC_UPDATE_REGISTER
check : 0x00
<6>[ 9972.226025] [0: system_server: 4318] s2m_rtc_update: RTC_UPDATE_REGISTER
check : 0x00
<6>[ 9972.226374] [0: system_server: 4318] max86900_pm_suspend
<6>[ 9972.226587] [0: system_server: 4318] wake enabled for irq 7
<2>[ 9972.226706] [0: system_server: 4318] --------Si47xx i2c driver Si47xx_su
spend called
<2>[ 9972.226716] [0: system_server: 4318] Si47xx_suspend: device not supporte
d
<6>[ 9972.226744] [0: system_server: 4318] [VIB] max77843_haptic_suspend
<6>[ 9972.226757] [0: system_server: 4318] [VIB] max77843_haptic_i2c 0
<6>[ 9972.227631] [0: system_server: 4318] wake enabled for irq 4
<6>[ 9972.227736] [0: system_server: 4318] vfsspi_regulator_onoff: ocp off, sm
c ret = 0
<6>[ 9972.227747] [0: system_server: 4318] vfsspi_regulator_onoff: off
<6>[ 9972.227766] [0: system_server: 4318] vfsspi_pm_suspend
<6>[ 9972.227809] [0: system_server: 4318] [SSP] ssp_suspend:
<6>[ 9972.234266] [0: system_server: 4318] [SSP] ssp_send_cmd: command 0xd4 0
<6>[ 9972.234431] [0: system_server: 4318] mst_ldo_device_suspend
<6>[ 9972.234482] [0: system_server: 4318] MST_LDO_DRV]]] suspend
<6>[ 9972.234490] [0: system_server: 4318] MST_LDO_DRV]]] suspend success afte
r smc : 122f122
<6>[ 9972.240149] [3: kworker/u16:33:32557] [mhi_turn_off_pcie_link] Exited...
<6>[ 9972.261406] [0: system_server: 4318] [MAX98505_DEBUG] max98505_suspend:
enter
<6>[ 9972.261495] [0: system_server: 4318] pacific-audio sound.34: pacific_sus
pend_post : set AIF1 port slave
<6>[ 9972.261553] [0: system_server: 4318] wake enabled for irq 577
<6>[ 9972.261566] [0: system_server: 4318] wake enabled for irq 580
<4>[ 9972.261589] [0: system_server: 4318] certify_hall_suspend start
<4>[ 9972.261604] [0: system_server: 4318] [keys] certify_hall_suspend certify
_status : 0 (detach)
<4>[ 9972.261622] [0: system_server: 4318] hall_suspend start
<4>[ 9972.261634] [0: system_server: 4318] [keys] hall_suspend flip_status : 1
(open)
<6>[ 9972.274742] [0: system_server: 4318] [MIF] usb_phy_prepare_shutdown
<6>[ 9972.274761] [0: system_server: 4318] dev rdy val = 1
<6>[ 9972.274771] [0: system_server: 4318] set_host_stat:set host port power s
tatus to [0]
<6>[ 9972.304740] [0: system_server: 4318] wait_dev_pwr_stat:[PWR OFF]...
<6>[ 9972.313589] I[0: system_server: 4318] mdm_device_ready_irq_handler, irq:
host ready val : 00000000
<6>[ 9972.313601] I[0: system_server: 4318] mdm_device_ready_irq_handler, irq:
dev ready val : 00000000
<6>[ 9972.331776] [1: system_server: 4318] done
<7>[ 9972.331816] [1: system_server: 4318] samsung-usb2phy 15530000.usb2phy: s
amsung_usb2phy_shutdown: End of setting for shutdown
<6>[ 9972.332026] [1: system_server: 4318] spi suspend is handled in device su
spend, dma mode = 0, bus_num = 3
<6>[ 9972.332045] [1: system_server: 4318] spi suspend is handled in device su
spend, dma mode = 0, bus_num = 1
<6>[ 9972.332137] [1: system_server: 4318] 3s3c24xx_serial_shutdown: port=4 res
et
<6>[ 9972.333055] [1: system_server: 4318] PM: suspend of devices complete aft
er 149.600 msecs
<6>[ 9972.333068] [1: system_server: 4318] ---Enabled regulators--<6>[ 9972.333091] [1: system_server: 4318] LDO1: 1200000uV, 0xffffffea mode, n

ull
<6>[ 9972.334869] [0: system_server: 4318] VDDIO_1.8V_COMP: 1800000uV, 0xfffff
fea mode, null
<6>[ 9972.335659] [0: system_server: 4318] VDDD_RET_1.0V_COMP: 700000uV, 0xfff
fffea mode, null
<6>[ 9972.337422] [0: system_server: 4318] VDD20_1P8_AP: 1800000uV, 0xffffffea
mode, null
<6>[ 9972.338023] [0: system_server: 4318] VCC_1.8V_CODEC_PMIC: 1800000uV, 0xf
fffffea mode, spi0.0-DBVDD1, spi0.0-AVDD, regulator.47-SUPPLY
<6>[ 9972.339583] [0: system_server: 4318] regulator-dummy: -22uV, 0xffffffea
mode, null
<6>[ 9972.339596] [0: system_server: 4318] Always On regulator count :10 [VDD2
2_1P1_2MIC][vdd_ldo8][vdd_mldo][vdd_lldo][vdd_disp_cam0][vdd_int][vdd_apollo][vd
d_atlas][vdd_mif][safeout1_range]
<6>[ 9972.339606] [0: system_server: 4318] ---Enabled regulator count: 16--<6>[ 9972.341064] [0: system_server: 4318] PM: late suspend of devices complet
e after 1.443 msecs
<6>[ 9972.341717] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
0: ffffffff
<6>[ 9972.341732] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
4: ffffffff
<6>[ 9972.341745] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
8: ffffffff
<6>[ 9972.341758] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
12: ffffffff
<6>[ 9972.341771] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
16: ffffffff
<6>[ 9972.341784] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
20: ffffffff
<6>[ 9972.341797] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
24: ffffffff
<6>[ 9972.341810] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
28: ffffffff
<6>[ 9972.341822] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
32: ffffffff
<6>[ 9972.341835] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
36: ffffffff
<6>[ 9972.341848] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
40: ffffffff
<6>[ 9972.341861] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
44: ffffffff
<6>[ 9972.341874] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
48: ffffffff
<6>[ 9972.341887] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
52: ffffffff
<6>[ 9972.341900] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
56: ffffffff
<6>[ 9972.341912] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
60: ffffffff
<6>[ 9972.341926] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL: 0
<6>[ 9972.341939] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL: 0
<6>[ 9972.341951] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL: 0
<6>[ 9972.341964] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_RTCT
L: 0
<6>[ 9972.341976] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL2: 0
<6>[ 9972.341989] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC

TL2: 0
<6>[ 9972.342001] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL2: 0
<6>[ 9972.342847] [0: system_server: 4318] exynos-pcie 15660000.pcie1: RC1 alr
eady off
<6>[ 9972.342865] [0: system_server: 4318] exynos-pcie 10ee0000.pcie0: RC0 alr
eady off
<6>[ 9972.342978] [0: system_server: 4318] spi suspend is handled in suspend_n
oirq, dma mode = 1, bus_num = 4
<6>[ 9972.342999] [0: system_server: 4318] spi suspend is handled in suspend_n
oirq, dma mode = 1, bus_num = 0
<6>[ 9972.343197] [0: system_server: 4318] PM: noirq suspend of devices comple
te after 2.117 msecs
<4>[ 9972.343211] [0: system_server: 4318] Disabling non-boot CPUs ...
<6>[ 9972.343475] [0: system_server: 4318] MobiCore mcd: <- core_num=0x0000000
0, active_cpu=0x00000001
<6>[ 9972.343538] [1:
mc_fastcall: 1747] MobiCore mcd: CoreSwap ok 1 -> 0
<4>[ 9972.344305] [1:
migration/1: 13] migrate_irqs: 19 callbacks suppress
ed
<4>[ 9972.344317] [1:
migration/1: 13] IRQ149 no longer affine to CPU1
<5>[ 9972.345300] [2: system_server: 4318] CPU1: shutdown
<4>[ 9972.346673] [2:
migration/2: 18] IRQ150 no longer affine to CPU2
<5>[ 9972.347697] [0: system_server: 4318] CPU2: shutdown
<4>[ 9972.348850] [3:
migration/3: 23] IRQ151 no longer affine to CPU3
<5>[ 9972.349875] [0: system_server: 4318] CPU3: shutdown
<4>[ 9972.351034] [4:
migration/4: 28] IRQ152 no longer affine to CPU4
<5>[ 9972.351823] [0: system_server: 4318] CPU4: shutdown
<6>[ 9972.352575] [0: system_server: 4318] [MIF] 1552000Khz
<6>[ 9972.352575] [0: system_server: 4318] WAKEUP_STAT: 0x80000001
<6>[ 9972.352575] [0: system_server: 4318] EINT_PEND: 0x00, 0x40 0x00, 0x80
<6>[ 9972.352575] [0: system_server: 4318] Resume caused by IRQ 7, sec-pmic-ir
q
<6>[ 9972.352575] [0: system_server: 4318] Suspended for 0.000 seconds
<6>[ 9972.352716] [0: system_server: 4318] Enabling non-boot CPUs ...
<4>[ 9972.352869] [1:
swapper/1:
0] CPU1: Booted secondary processor
<6>[ 9972.353422] [0: system_server: 4318] MobiCore mcd: <- core_num=0x0000000
1, active_cpu=0x00000000
<6>[ 9972.353470] [0:
mc_fastcall: 1747] MobiCore mcd: CoreSwap ok 0 -> 1
<6>[ 9972.353506] [0: system_server: 4318] CPU1 is up
<4>[ 9972.353630] [2:
swapper/2:
0] CPU2: Booted secondary processor
<6>[ 9972.354174] [0: system_server: 4318] CPU2 is up
<4>[ 9972.354293] [3:
swapper/3:
0] CPU3: Booted secondary processor
<6>[ 9972.354933] [0: system_server: 4318] CPU3 is up
<4>[ 9972.355150] [4:
swapper/4:
0] CPU4: Booted secondary processor
<6>[ 9972.355996] [0: system_server: 4318] CPU4 is up
<6>[ 9972.356194] [0: system_server: 4318] spi resume is handled in resume_noi
rq, dma mode = 1, bus_num = 0
<6>[ 9972.356251] [0: system_server: 4318] spi resume is handled in resume_noi
rq, dma mode = 1, bus_num = 4
<6>[ 9972.369077] [0: system_server: 4318] pcieport 0001:00:00.0: [debug] pmcs
r reg : ffff dev->current_state : 3
<6>[ 9972.369089] [0: system_server: 4318] pcieport 0001:00:00.0: [debug] devi
ce_vendor_id reg : ffffffff
<6>[ 9972.369101] [0: system_server: 4318] pcieport 0001:00:00.0: Refused to c
hange power state, currently in D3, PCI_PM_CTRL=ffff
<6>[ 9972.369114] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL: 0
<6>[ 9972.369124] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL: 0
<6>[ 9972.369134] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC

TL: 0
<6>[ 9972.369144] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_RTCT
L: 0
<6>[ 9972.369153] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL2: 0
<6>[ 9972.369163] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL2: 0
<6>[ 9972.369172] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL2: 0
<6>[ 9972.369184] [0: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x3c (was 0xffffffff, writing 0xffffffff)
<6>[ 9972.369195] [0: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x38 (was 0xffffffff, writing 0xffffffff)
<6>[ 9972.369207] [0: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x34 (was 0xffffffff, writing 0xffffffff)
<6>[ 9972.369218] [0: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x30 (was 0xffffffff, writing 0xffffffff)
<6>[ 9972.369229] [0: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x2c (was 0xffffffff, writing 0xffffffff)
<6>[ 9972.369239] [0: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x28 (was 0xffffffff, writing 0xffffffff)
<6>[ 9972.369250] [0: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x24 (was 0xffffffff, writing 0xffffffff)
<6>[ 9972.369262] [0: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x20 (was 0xffffffff, writing 0xffffffff)
<6>[ 9972.369273] [0: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x1c (was 0xffffffff, writing 0xffffffff)
<6>[ 9972.369283] [0: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x18 (was 0xffffffff, writing 0xffffffff)
<6>[ 9972.369295] [0: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x14 (was 0xffffffff, writing 0xffffffff)
<6>[ 9972.369305] [0: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x10 (was 0xffffffff, writing 0xffffffff)
<6>[ 9972.369316] [0: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0xc (was 0xffffffff, writing 0xffffffff)
<6>[ 9972.369327] [0: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x8 (was 0xffffffff, writing 0xffffffff)
<6>[ 9972.369338] [0: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x4 (was 0xffffffff, writing 0xffffffff)
<6>[ 9972.369349] [0: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x0 (was 0xffffffff, writing 0xffffffff)
<6>[ 9972.369372] [0: system_server: 4318] pcieh 0001:01:00.0: [debug] step 1,
device_vendor_id reg : ffffffff
<6>[ 9972.369381] [0: system_server: 4318] pcieh 0001:01:00.0: [debug] step 2,
PMCSR reg value: ffff
<6>[ 9972.369392] [0: system_server: 4318] pcieh 0001:01:00.0: [debug] step 3,
PMCSR reg value: 0
<6>[ 9972.369401] [0: system_server: 4318] pcieh 0001:01:00.0: [debug] step 4,
device_vendor_id reg : ffffffff
<6>[ 9972.382400] [0: system_server: 4318] pcieh 0001:01:00.0: [debug] pmcsr r
eg : ffff dev->current_state : 3
<6>[ 9972.382411] [0: system_server: 4318] pcieh 0001:01:00.0: [debug] device_
vendor_id reg : ffffffff
<6>[ 9972.382422] [0: system_server: 4318] pcieh 0001:01:00.0: Refused to chan
ge power state, currently in D3, PCI_PM_CTRL=ffff
<6>[ 9972.382434] [0: system_server: 4318] exynos-pcie 15660000.pcie1: PCIE li
nk state is 0
<6>[ 9972.382444] [0: system_server: 4318] pcieh 0001:01:00.0: [debug] setp 5,
PMCSR reg value: ffff
<6>[ 9972.382455] [0: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_DEVCTL:

2c10
<6>[ 9972.382465] [0: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_LNKCTL:
142
<6>[ 9972.382475] [0: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_SLTCTL:
0
<6>[ 9972.382484] [0: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_RTCTL:
0
<6>[ 9972.382494] [0: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_DEVCTL2
: 400
<6>[ 9972.382503] [0: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_LNKCTL2
: 1
<6>[ 9972.382512] [0: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_SLTCTL2
: 0
<6>[ 9972.382524] [0: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x3c (was 0xffffffff, writing 0x1ed)
<6>[ 9972.382535] [0: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x38 (was 0xffffffff, writing 0x0)
<6>[ 9972.382546] [0: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x34 (was 0xffffffff, writing 0x48)
<6>[ 9972.382558] [0: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x30 (was 0xffffffff, writing 0x0)
<6>[ 9972.382568] [0: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x2c (was 0xffffffff, writing 0x77414e4)
<6>[ 9972.382579] [0: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x28 (was 0xffffffff, writing 0x0)
<6>[ 9972.382590] [0: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x24 (was 0xffffffff, writing 0x0)
<6>[ 9972.412562] [0: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x20 (was 0xffffffff, writing 0x0)
<6>[ 9972.442532] [0: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x1c (was 0xffffffff, writing 0x0)
<6>[ 9972.470401] [4: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x18 (was 0xffffffff, writing 0x1c400004)
<6>[ 9972.500375] [4: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x14 (was 0xffffffff, writing 0x0)
<6>[ 9972.530360] [4: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x10 (was 0xffffffff, writing 0x1c200004)
<6>[ 9972.535732] [0:
kworker/0:1:25228] sync_system +
<6>[ 9972.535748] [0:
kworker/0:1:25228] sync_system <6>[ 9972.560331] [4: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0xc (was 0xffffffff, writing 0x10)
<6>[ 9972.560342] [4: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x8 (was 0xffffffff, writing 0x2800003)
<6>[ 9972.560352] [4: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x4 (was 0xffffffff, writing 0x100146)
<6>[ 9972.560362] [4: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x0 (was 0xffffffff, writing 0x43e914e4)
<6>[ 9972.572405] [4: system_server: 4318] pcieport 0000:00:00.0: [debug] pmcs
r reg : ffff dev->current_state : 3
<6>[ 9972.572415] [4: system_server: 4318] pcieport 0000:00:00.0: [debug] devi
ce_vendor_id reg : ffffffff
<6>[ 9972.572424] [4: system_server: 4318] pcieport 0000:00:00.0: Refused to c
hange power state, currently in D3, PCI_PM_CTRL=ffff
<6>[ 9972.585726] [4: system_server: 4318] mhi 0000:01:00.0: [debug] pmcsr reg
: ffff dev->current_state : 3
<6>[ 9972.585735] [4: system_server: 4318] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : ffffffff
<6>[ 9972.585743] [4: system_server: 4318] mhi 0000:01:00.0: Refused to change
power state, currently in D3, PCI_PM_CTRL=ffff
<6>[ 9972.585859] [4: system_server: 4318] PM: noirq resume of devices complet

e after 229.850 msecs


<6>[ 9972.586253] [4: system_server: 4318] exynos-mailbox 11240000.mailbox: Lo
ading APM firmware ...
<6>[ 9972.586415] [4: system_server: 4318] OK
<6>[ 9972.587531] [4: system_server: 4318] PM: early resume of devices complet
e after 1.386 msecs
<6>[ 9972.587650] [0: kworker/u16:25:32549] [mhi_resume] [mhi_resume]
<6>[ 9972.587666] [0: kworker/u16:25:32549] [mhi_initiate_m0] Entered MHI state
5, Pending M0 0 Pending M3 0
<6>[ 9972.587677] [0: kworker/u16:25:32549] [mhi_initiate_m0] Waiting for M0 M1
or M3. Currently 5...
<6>[ 9972.587687] [0: kworker/u16:25:32549] [mhi_initiate_m0] Wait complete sta
te: 5
<6>[ 9972.587698] [0: kworker/u16:25:32549] [mhi_turn_on_pcie_link] Entered...
<6>[ 9972.587711] [0: kworker/u16:25:32549] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, start of poweron, pcie state: 0
<6>[ 9972.587808] [4: system_server: 4318] s3c2410_wdt: watchdog enabled
<6>[ 9972.591135] [4: system_server: 4318] spi resume is handled in device res
ume, dma mode = 0, bus_num = 1
<6>[ 9972.591163] [4: system_server: 4318] spi resume is handled in device res
ume, dma mode = 0, bus_num = 3
<7>[ 9972.591374] [4: system_server: 4318] samsung-usb2phy 15530000.usb2phy: C
an't configure specified phy mode
<7>[ 9972.591392] [4: system_server: 4318] samsung-usb2phy 15530000.usb2phy: e
nd of samsung_usb2phy_init
<7>[ 9972.591403] [4: system_server: 4318] samsung-usb2phy 15530000.usb2phy: s
amsung_usb2phy_runtime_resume
<4>[ 9972.591422] [4: system_server: 4318] usb usb1: root hub lost power or wa
s reset
<7>[ 9972.591442] [4: system_server: 4318] s5p-ehci 15510000.usb: reset comman
d 0080b02 park=3 ithresh=8 period=1024 Reset HALT
<6>[ 9972.591457] [4: system_server: 4318] dev rdy val = 0
<6>[ 9972.591464] [4: system_server: 4318] set_host_stat:set host port power s
tatus to [1]
<6>[ 9972.591474] [4: system_server: 4318] wait_dev_pwr_stat:[PWR ON]...
<6>[ 9972.608515] I[0:
swapper/0:
0] mdm_device_ready_irq_handler, irq:
host ready val : 00000001
<6>[ 9972.608526] I[0:
swapper/0:
0] mdm_device_ready_irq_handler, irq:
dev ready val : 00000001
<6>[ 9972.621434] [4: system_server: 4318] done
<7>[ 9972.621476] [3: kworker/u16:33:32557] usb usb1: usb resume
<7>[ 9972.621491] [3: kworker/u16:33:32557] s5p-ehci 15510000.usb: resume root
hub after power loss
<7>[ 9972.621503] [3: kworker/u16:33:32557] s5p-ehci 15510000.usb: LRESET 0
<7>[ 9972.621526] [3: kworker/u16:33:32557] hub 1-0:1.0: hub_reset_resume
<7>[ 9972.621537] [3: kworker/u16:33:32557] hub 1-0:1.0: enabling power on all
ports
<6>[ 9972.626085] [0: kworker/u16:25:32549] exynos-pcie 10ee0000.pcie0: D state
: 0, 52b400
<6>[ 9972.638407] [0: kworker/u16:25:32549] exynos-pcie 10ee0000.pcie0: exynos_
pcie_reset: Link up : 0x03ac9b11
<6>[ 9972.638633] [0: kworker/u16:25:32549] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, end of poweron, pcie state: 3
<6>[ 9972.649240] [0: kworker/u16:25:32549] mhi 0000:01:00.0: [debug] pmcsr reg
: 8 dev->current_state : 3
<6>[ 9972.649420] [0: kworker/u16:25:32549] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9972.649432] [0: kworker/u16:25:32549] exynos-pcie 10ee0000.pcie0: Recover
y for the link of RC0
<6>[ 9972.649443] [0: kworker/u16:25:32549] exynos-pcie 10ee0000.pcie0: Recover

config space of RC0 and its EP


<6>[ 9972.649452] [0: kworker/u16:25:32549] exynos-pcie 10ee0000.pcie0: Recover
RC0
<6>[ 9972.649479] [0: kworker/u16:25:32549] exynos-pcie 10ee0000.pcie0: Recover
EP of RC0
<6>[ 9972.649866] [0: kworker/u16:25:32549] exynos-pcie 10ee0000.pcie0: Refresh
ing the saved config space in PCI framework for RC0 and its EP
<7>[ 9972.652428] [3: kworker/u16:33:32557] s5p-ehci 15510000.usb: GetStatus po
rt:2 status 001803 0 ACK POWER sig=j CSC CONNECT
<7>[ 9972.652442] [3: kworker/u16:33:32557] hub 1-0:1.0: port 2: status 0501 ch
ange 0001
<7>[ 9972.652516] [1: kworker/u16:3: 8924] usb 1-2: finish reset-resume
<6>[ 9972.655012] [0: kworker/u16:25:32549] [mhi_turn_on_pcie_link] Exited...
<6>[ 9972.655025] [0: kworker/u16:25:32549] [mhi_initiate_m0] Setting M0 ...
<6>[ 9972.655181] [0: kworker/u16:25:32549] [mhi_initiate_m0] Exited...
<6>[ 9972.659432] [0: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 5 link 1, ring type 2, index 0 db 0x5fa26f40
<6>[ 9972.659446] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9972.659477] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9972.659490] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9972.659501] [2:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9972.659977] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9972.659986] [0: kworker/u16:25:32549] [mhi_resume] Wait complete state: 2
<4>[ 9972.677390] [0: system_server: 4318] ufs_get_device_info: UNIQUE NUMBER
= 02157df271b5cb31 , LT: 0x22
<6>[ 9972.681099] [0: system_server: 4318] exynos-ufs 15570000.ufs: Power mode
change(0): M(1)G(2)L(2)HS-series(2)
<4>[ 9972.681442] [0: system_server: 4318] hall_resume start
<4>[ 9972.681453] [0: system_server: 4318] [keys] hall_resume flip_status : 1
(open)
<4>[ 9972.681467] [0: system_server: 4318] certify_hall_resume start
<4>[ 9972.681476] [0: system_server: 4318] [keys] certify_hall_resume certify_
status : 0 (detach)
<6>[ 9972.681492] [0: system_server: 4318] wake disabled for irq 577
<6>[ 9972.681502] [0: system_server: 4318] wake disabled for irq 580
<6>[ 9972.681629] [0:
kworker/0:0:13589] [MAX98505_DEBUG] max98505_resume: e
nter
<6>[ 9972.682486] [1: system_server: 4318] mst_ldo_device_resume
<6>[ 9972.682521] [1: system_server: 4318] MST_LDO_DRV]]] resume
<6>[ 9972.682527] [1: system_server: 4318] MST_LDO_DRV]]] resume success after
smc : 122f122
<6>[ 9972.685768] [2: system_server: 4318] [SSP] ssp_resume:
<6>[ 9972.692035] [2: system_server: 4318] [SSP] ssp_send_cmd: command 0xd3 0
<3>[ 9972.692063] [2: system_server: 4318] vfsspi_wakeup_daemon send signal fa
iled by wakeup(0)
<6>[ 9972.692093] [2: system_server: 4318] vfsspi_regulator_onoff: ocp on, smc
ret = 0
<6>[ 9972.695143] [2: system_server: 4318] vfsspi_regulator_onoff: on
<6>[ 9972.695158] [2: system_server: 4318] vfsspi_pm_resume
<6>[ 9972.695206] [2: system_server: 4318] wake disabled for irq 4
<6>[ 9972.695239] [2: system_server: 4318] [VIB] max77843_haptic_resume
<2>[ 9972.695255] [2: system_server: 4318] Si47xx_resume: device not supported
<6>[ 9972.695273] [2: system_server: 4318] wake disabled for irq 7
<6>[ 9972.695475] [2: system_server: 4318] max86900_pm_resume
<6>[ 9972.695486] [0:irq/7-sec-pmic-: 794] s2m-rtc s2m-rtc: s2m_rtc_alarm_irq:
irq(550)
<6>[ 9972.697365] [2: system_server: 4318] s2m_rtc_update: RTC_UPDATE_REGISTER

check : 0x00
<6>[ 9972.697499] [2: system_server: 4318] s2m-rtc s2m-rtc: s2m_rtc_read_time:
2016-11-17 16:19:18(0x10)PM
<6>[ 9972.698904] [0:
kworker/0:3:22917] s2m_rtc_update: RTC_UPDATE_REGISTER
check : 0x00
<6>[ 9972.699141] [0:
kworker/0:3:22917] s2m-rtc s2m-rtc: s2m_rtc_read_time:
2016-11-17 16:19:18(0x10)PM
<6>[ 9972.700304] [2: system_server: 4318] exynos-pcie 15660000.pcie1: exynos_
pcie_poweron, start of poweron, pcie state: 0
<7>[ 9972.705906] [2: kworker/u16:3: 8924] s5p-ehci 15510000.usb: port 2 reset
complete, port enabled
<7>[ 9972.705929] [2: kworker/u16:3: 8924] s5p-ehci 15510000.usb: GetStatus po
rt:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
<6>[ 9972.719186] [3: kworker/u16:3: 8924] usb 1-2: reset high-speed USB devic
e number 2 using s5p-ehci
<6>[ 9972.719492] [2: system_server: 4318] exynos-pcie 15660000.pcie1: D state
: 0, 3f6c00
<6>[ 9972.720790] [2: system_server: 4318] exynos-pcie 15660000.pcie1: exynos_
pcie_reset: Link up : 0x036c6411
<6>[ 9972.720945] [2: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL: 2010
<6>[ 9972.721090] [2: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL: 42
<6>[ 9972.721101] [2: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL: 0
<6>[ 9972.721115] [2: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_RTCT
L: 0
<6>[ 9972.721130] [2: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL2: 400
<6>[ 9972.721145] [2: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL2: 1
<6>[ 9972.721155] [2: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL2: 0
<6>[ 9972.721172] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x3c (was 0x1ff, writing 0x101ed)
<6>[ 9972.721193] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x38 (was 0x0, writing 0x0)
<6>[ 9972.721209] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x34 (was 0x40, writing 0x40)
<6>[ 9972.721225] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x30 (was 0x0, writing 0x0)
<6>[ 9972.721241] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x2c (was 0x0, writing 0x0)
<6>[ 9972.721256] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x28 (was 0x0, writing 0x0)
<6>[ 9972.721272] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x24 (was 0x0, writing 0x0)
<6>[ 9972.721288] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x20 (was 0x1ff01c00, writing 0x1ff01c00)
<6>[ 9972.721304] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x1c (was 0x0, writing 0x0)
<6>[ 9972.721320] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x18 (was 0x10100, writing 0x10100)
<6>[ 9972.721336] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x14 (was 0x0, writing 0x0)
<6>[ 9972.721351] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x10 (was 0x0, writing 0x0)
<6>[ 9972.721368] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0xc (was 0x10000, writing 0x10010)
<6>[ 9972.721388] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co

nfig space at offset 0x8 (was 0x1, writing 0x6040001)


<6>[ 9972.721410] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x4 (was 0x100107, writing 0x100147)
<6>[ 9972.721430] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x0 (was 0xa575144d, writing 0xa575144d)
<6>[ 9972.721482] [2: system_server: 4318] exynos-pcie 15660000.pcie1: exynos_
pcie_poweron, end of poweron, pcie state: 3
<4>[ 9972.721496] [2: system_server: 4318] dhdpcie_resume_dev: Enter
<6>[ 9972.721639] [2: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_DEVCTL:
2c10
<6>[ 9972.721732] [2: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_LNKCTL:
142
<6>[ 9972.721741] [2: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_SLTCTL:
0
<6>[ 9972.721750] [2: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_RTCTL:
0
<6>[ 9972.721887] [2: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_DEVCTL2
: 400
<6>[ 9972.721979] [2: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_LNKCTL2
: 1
<6>[ 9972.721989] [2: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_SLTCTL2
: 0
<6>[ 9972.722129] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x3c (was 0x100, writing 0x1ed)
<6>[ 9972.722307] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x38 (was 0x0, writing 0x0)
<6>[ 9972.722429] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x34 (was 0x48, writing 0x48)
<6>[ 9972.722554] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x30 (was 0x0, writing 0x0)
<6>[ 9972.722648] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x2c (was 0x77414e4, writing 0x77414e4)
<6>[ 9972.722742] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x28 (was 0x0, writing 0x0)
<6>[ 9972.722836] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x24 (was 0x0, writing 0x0)
<6>[ 9972.723210] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x20 (was 0x0, writing 0x0)
<6>[ 9972.723584] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x1c (was 0x0, writing 0x0)
<6>[ 9972.723958] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x18 (was 0x4, writing 0x1c400004)
<6>[ 9972.724418] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x18 (writing 0x1c400004)
<6>[ 9972.724512] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x14 (was 0x0, writing 0x0)
<6>[ 9972.724606] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x10 (was 0x4, writing 0x1c200004)
<6>[ 9972.724791] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x10 (writing 0x1c200004)
<6>[ 9972.724885] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0xc (was 0x0, writing 0x10)
<6>[ 9972.725062] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x8 (was 0x2800003, writing 0x2800003)
<6>[ 9972.725156] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x4 (was 0x100000, writing 0x100146)
<6>[ 9972.725615] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x0 (was 0x43e914e4, writing 0x43e914e4)
<4>[ 9972.726914] [2: system_server: 4318] dhdpcie_send_mb_data: H2D_MB_DATA:
0x00000010

<4>[ 9972.726946] [2: system_server: 4318]


_D0_INFORM to dongle
<7>[ 9972.737218] [0: kworker/u16:3: 8924]
: 100
<6>[ 9972.741397] [0: kworker/u16:3: 8924]
<6>[ 9972.741755] [2: system_server: 4318]
r 154.212 msecs
<6>[ 9972.742664] I[0:
swapper/0:
0]
<6>[ 9972.742675] I[0:
swapper/0:
0]
handling to false
<6>[ 9972.742702] I[0:
swapper/0:
0]
<6>[ 9972.743791] [0:
kworker/0:0:13589]
, data(0xccec)
<7>[ 9972.744674] [0:
kworker/0:0:13589]
to (271, 0x1b19)
<6>[ 9972.745081] [0:
kworker/0:0:13589]
0_REG(0x1603), QRTABLE30_REG(0x1005)
<7>[ 9972.745999] [2: system_server: 4318]
<6>[ 9972.746536] [0:
kworker/0:0:13589]
changed
<6>[ 9972.746557] [0:
kworker/0:0:13589]
Tbat:271)
<6>[ 9972.746637] [0:
kworker/0:0:13589]
sleep_mode = 0
<6>[ 9972.746659] [0:
kworker/0:0:13589]
<7>[ 9972.746874] [3:
khubd:
04 evt 0000
<6>[ 9972.746919] [3:
khubd:
hange 0000, 480 Mb/s
<3>[ 9972.748125] [3:
mdm_helper:
<4>[ 9972.746012] [2: system_server:
<6>[ 9972.756533] [1:onic.tuiservice:

dhdpcie_send_mb_data: send H2D_HOST


usb 1-2: USB quirks for this device
[CHKRA:5]>
PM: resume of devices complete afte
[NACB:5]<
notification_available_cb: set lpa
[CHKRA:5]>
max77843_fg_read_vcell: VCELL(4098)
max77843_fg_write_temp: temperature
max77843_fg_check_qrtable: QRTABLE2
PM: Finishing wakeup.
power_supply battery: power_supply_
Skip monitor work(46, Vnow:4098mV,
sec_bat_get_property cable type = 1
sec_bat_get_property cable type = 1

742] hub 1-0:1.0: state 7 ports 2 chg 00


742] hub 1-0:1.0: port 2, status 0503, c
3355] esoc REQ enginer waiting on request
4318] Restarting tasks ... done.
659] t-base-tui module: ioctl 0x80047402

<6>[ 9972.756552] [1:onic.tuiservice: 659] TUI_IO_WAITCMD


<6>[ 9972.757320] [0:
healthd: 3346] sec_bat_get_property cable type = 1
sleep_mode = 0
<12>[ 9972.757991] [0:
healthd: 3346] healthd: battery l=98 v=4098 t=27.
1 h=2 st=3 c=0 o=1 ca=-403 ct=0 ps=0 chg= 2016-11-17 16:19:18.675371936 UTC
<12>[ 9972.758028] [0:
healthd: 3346] healthd: battery l=98 v=4098 t=27.
1 h=2 st=3 c=0 o=1 ca=-403 ct=0 ps=0 chg= 2016-11-17 16:19:18.675371936 UTC hv=0
sec=0 chg=
<14>[ 9972.758054] [0:
healthd: 3346] healthd-android: healthd_mode_andr
oid_battery_update
<6>[ 9972.758068] [2: system_server: 4318] mdm_hsic_pm_notify_event: unblock r
equest
<6>[ 9972.758083] [2: system_server: 4318] request_active_lock_set
<14>[ 9972.758112] [0:
healthd: 3346] BatteryPropertiesRegistrar: notify
Listeners : start
<6>[ 9972.758224] [2: system_server: 4318] PM: suspend exit 2016-11-17 16:19:1
8.675660394 UTC
<14>[ 9972.758154] [0:
healthd: 3346] IBatteryPropertiesListener : batte
ryPropertiesChanged!
<14>[ 9972.758154] [0:
healthd: 3346] : BatteryPropertiesRegistrar: noti
fyListeners : done
<6>[ 9972.763347] [0: thread_hotplug:18143] frequency info : 1200000, prev_cmd
1, exe_cmd 4
<6>[ 9972.763367] [0: thread_hotplug:18143] lcd is on : 0, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9972.763380] [0: thread_hotplug:18143] cluster1 cores hotplug out : 0

<6>[ 9972.764981] [0:


kworker/0:0:13589] exynos-dwc3 15400000.usb: dwc3_exyn
os_runtime_suspend
<4>[ 9972.773174] [0:
kworker/0:2:31050] Emergency Sync complete
<6>[ 9972.775786] [2: kworker/u16:6:32449] mdm_hsic_rpm_check
<6>[ 9972.775815] [2: kworker/u16:6:32449] mdm_hsic_rpm_restart
<6>[ 9972.870968] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9972.873776] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[ 9972.873806] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[ 9972.873839] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9972.874037] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<7>[ 9973.260963] [0:
kworker/0:2:31050] usb 1-2: usb auto-suspend, wakeup 1
<7>[ 9973.272545] [0:
kworker/0:2:31050] hub 1-0:1.0: hub_suspend
<7>[ 9973.272601] [0:
kworker/0:2:31050] usb usb1: bus auto-suspend, wakeup
1
<7>[ 9973.272624] [0:
kworker/0:2:31050] s5p-ehci 15510000.usb: suspend root
hub
<3>[ 9973.274083] [0:
kworker/0:2:31050] s5p-ehci 15510000.usb: s5p_ehci_run
time_suspend
<6>[ 9973.274855] [1:
kworker/1:4:14113] MIF(635000): unset TMU_COLD: 675000
=> (set_volt: 637500, get_volt: 637500)
<6>[ 9973.275591] [1:
kworker/1:4:14113] DISP(100000): unset TMU_COLD: (set_
volt: 650000, get_volt: 650000)
<6>[ 9973.276506] [1:
kworker/1:4:14113] INT(100000): unset TMU_COLD: 687500
=> 650000
<6>[ 9973.276540] [1:
kworker/1:4:14113] tmu temperature state 1 to 0, cur_t
emp : 33
<7>[ 9973.285796] [0:
kworker/0:2:31050] samsung-usb2phy 15530000.usb2phy: s
amsung_usb2phy_runtime_suspend
<6>[ 9973.285849] [0:
kworker/0:2:31050] request_active_lock_release
<6>[ 9973.285870] [0:
kworker/0:2:31050] s5p_ehci_runtime_suspend: usage=0,
child=0
<6>[ 9973.569163] [0: thread_hotplug:18143] frequency info : 1500000, prev_cmd
4, exe_cmd 0
<6>[ 9973.569183] [0: thread_hotplug:18143] lcd is on : 0, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9973.569193] [0: thread_hotplug:18143] cluster1 cores hotplug out : 0
<4>[ 9973.569605] [5:
swapper/5:
0] CPU5: Booted secondary processor
<4>[ 9973.571095] [6:
swapper/6:
0] CPU6: Booted secondary processor
<4>[ 9973.572241] [7:
swapper/7:
0] CPU7: Booted secondary processor
<6>[ 9973.672619] [0: thread_hotplug:18143] frequency info : 400000, prev_cmd 0
, exe_cmd 4
<6>[ 9973.672676] [0: thread_hotplug:18143] lcd is on : 0, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9973.672713] [0: thread_hotplug:18143] cluster1 cores hotplug out : 0
<6>[ 9973.875981] [2: kworker/u16:6:32449] [mhi_initiate_m3] Entered MHI state
4, Pending M0 0 Pending M3 0
<6>[ 9973.876060] [2: kworker/u16:6:32449] [mhi_initiate_m3] Triggering wake o
ut of M2
<6>[ 9973.886804] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26f60
<6>[ 9973.886866] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9973.887102] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9973.887153] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Entered

<6>[ 9973.887197] [2:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT


cancelled, either running or never started
<6>[ 9973.891439] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9973.891583] [3: kworker/u16:6:32449] [mhi_initiate_m3] Cancelled M1 time
r, timer was active
<6>[ 9973.891830] [3: kworker/u16:6:32449] [mhi_initiate_m3] Waiting for M3 co
mpletion.
<6>[ 9973.904814] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9973.905037] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 5
<6>[ 9973.905089] [2:MHI_STATE_THREA: 4605] [process_M3_transition] Processing
M3 state transition
<6>[ 9973.905297] [3: kworker/u16:6:32449] [mhi_initiate_m3] M3 completion rec
eived
<6>[ 9973.905363] [3: kworker/u16:6:32449] [mhi_turn_off_pcie_link] Entered...
<6>[ 9973.919416] [3: kworker/u16:6:32449] mhi 0000:01:00.0: [debug] pmcsr reg
: b dev->current_state : 0
<6>[ 9973.919602] [3: kworker/u16:6:32449] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9973.919719] [3: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: ack mes
sage is ok
<6>[ 9973.919765] [3: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: receive
d Enter_L23_READY DLLP packet
<6>[ 9973.919821] [3: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[ 9973.919995] [3: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[ 9973.950000] [3: kworker/u16:6:32449] [mhi_turn_off_pcie_link] Exited...
<6>[ 9973.975941] [0: thread_hotplug:18143] frequency info : 500000, prev_cmd 4
, exe_cmd 1
<6>[ 9973.975993] [0: thread_hotplug:18143] lcd is on : 0, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9973.976024] [0: thread_hotplug:18143] cluster1 cores hotplug out : 0
<4>[ 9973.979276] [7:
migration/7: 43] IRQ155 no longer affine to CPU7
<5>[ 9973.980783] [0: thread_hotplug:18143] CPU7: shutdown
<4>[ 9973.984849] [6:
migration/6: 38] IRQ154 no longer affine to CPU6
<5>[ 9973.985466] [0: thread_hotplug:18143] CPU6: shutdown
<4>[ 9973.989056] [5:
migration/5: 33] IRQ153 no longer affine to CPU5
<5>[ 9973.989731] [0: thread_hotplug:18143] CPU5: shutdown
<4>[ 9973.992394] [4:
migration/4: 28] IRQ152 no longer affine to CPU4
<5>[ 9973.993095] [0: thread_hotplug:18143] CPU4: shutdown
<4>[ 9973.998076] [3:
migration/3: 23] IRQ151 no longer affine to CPU3
<4>[ 9973.998285] [3:
migration/3: 23] IRQ250 no longer affine to CPU3
<5>[ 9974.000788] [0: thread_hotplug:18143] CPU3: shutdown
<5>[ 9974.007757] [0: thread_hotplug:18143] CPU2: shutdown
<6>[ 9974.011234] [0: thread_hotplug:18143] MobiCore mcd: <- core_num=0x0000000
0, active_cpu=0x00000001
<6>[ 9974.011506] [1:
mc_fastcall: 1747] MobiCore mcd: CoreSwap ok 1 -> 0
<5>[ 9974.015368] [0: thread_hotplug:18143] CPU1: shutdown
<6>[ 9974.515871] [0: thread_hotplug:18143] frequency info : 1000000, prev_cmd
1, exe_cmd 4
<6>[ 9974.515905] [0: thread_hotplug:18143] lcd is on : 0, low power mode = 1,
dm_hotplug disable = 0
<6>[ 9974.515920] [0: thread_hotplug:18143] cluster1 cores hotplug out : 0
<4>[ 9974.516500] [1:
swapper/1:
0] CPU1: Booted secondary processor
<6>[ 9974.518473] [0: thread_hotplug:18143] MobiCore mcd: <- core_num=0x0000000
1, active_cpu=0x00000000
<6>[ 9974.518583] [0:
mc_fastcall: 1747] MobiCore mcd: CoreSwap ok 0 -> 1
<4>[ 9974.519568] [2:
swapper/2:
0] CPU2: Booted secondary processor

<4>[ 9974.521412] [3:


swapper/3:
0] CPU3: Booted secondary processor
<6>[ 9974.582914] [0: system_server: 4318] PM: suspend entry 2016-11-17 16:19:
20.500339244 UTC
<6>[ 9974.582943] [1: system_server: 4318] PM: Syncing filesystems ... done.
<7>[ 9974.597102] [1: system_server: 4318] PM: Preparing system for mem sleep
<6>[ 9974.597341] [3: system_server: 4318] exynos_dm_hotplug_notifier, 958 : d
ynamic_hotplug CMD_SLEEP_PREPARE
<6>[ 9974.597370] [3: system_server: 4318] nr_sleep_prepare_cpus : 4, tmp_nr_s
leep_prepare_cpus : 5
<4>[ 9974.598055] [4:
swapper/4:
0] CPU4: Booted secondary processor
<6>[ 9974.599682] [0: thread_hotplug:18143] stopped thread_hotplug
<6>[ 9974.607494] [1: system_server: 4318] MIF(635000): set TMU_COLD: 637500 =
> (set_volt: 675000, get_volt: 668750)
<6>[ 9974.610005] [0: system_server: 4318] DISP(100000): set TMU_COLD: 650000
=> (set_volt: 687500, get_volt: 687500)
<6>[ 9974.611008] [0: system_server: 4318] INT(100000): set TMU_COLD: 650000 =
> 687500
<6>[ 9974.611047] [0: system_server: 4318] tmu temperature state 0 to 1
<6>[ 9974.611091] [0: system_server: 4318] mdm_hsic_pm_notify_event: block req
uest
<3>[ 9974.612883] [3:
mdm_helper: 3355] esoc REQ engine released from wait
<4>[ 9974.612342] [0: system_server: 4318] Freezing user space processes ...
<6>[ 9974.616678] [0: system_server: 4318] last active wakeup source: eventpol
l
<4>[ 9974.616726] [0: system_server: 4318]
<3>[ 9974.616756] [0: system_server: 4318] Freezing of tasks aborted after 0.0
04 seconds
<3>[ 9974.617262] [1:
mdm_helper: 3355] esoc REQ enginer waiting on request
<4>[ 9974.616786] [1:onic.tuiservice: 659] Restarting tasks ...
t-base-tui module: ioctl 0x80047402 <6>[ 9974.619986] [1:onic.tuiservice: 659]
TUI_IO_WAITCMD
<4>[ 9974.620918] [0: system_server: 4318] done.
<6>[ 9974.622536] [0: thread_hotplug:18168] frequency info : 500000, prev_cmd 1
, exe_cmd 4
<6>[ 9974.622577] [0: thread_hotplug:18168] lcd is on : 0, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9974.622608] [0: thread_hotplug:18168] cluster1 cores hotplug out : 0
<6>[ 9974.626777] [0: system_server: 4318] mdm_hsic_pm_notify_event: unblock r
equest
<6>[ 9974.626829] [0: system_server: 4318] request_active_lock_set
<6>[ 9974.627006] [1: system_server: 4318] PM: suspend exit 2016-11-17 16:19:2
0.544433124 UTC
<6>[ 9974.645770] [0: kworker/u16:6:32449] mdm_hsic_rpm_check
<7>[ 9974.645817] [0: kworker/u16:6:32449] s5p-ehci 15510000.usb: s5p_ehci_run
time_resume
<6>[ 9974.645836] [0: kworker/u16:6:32449] request_active_lock_set
<7>[ 9974.645862] [0: kworker/u16:6:32449] samsung-usb2phy 15530000.usb2phy: s
amsung_usb2phy_runtime_resume
<6>[ 9974.645912] [0: kworker/u16:6:32449] s5p_ehci_runtime_resume: usage=1, c
hild=0
<7>[ 9974.645940] [0: kworker/u16:6:32449] usb usb1: usb auto-resume
<7>[ 9974.645964] [0: kworker/u16:6:32449] s5p-ehci 15510000.usb: resume root
hub
<7>[ 9974.645986] [0: kworker/u16:6:32449] s5p-ehci 15510000.usb: LRESET 0
<7>[ 9974.669291] [0: kworker/u16:6:32449] hub 1-0:1.0: hub_resume
<7>[ 9974.669355] [0: kworker/u16:6:32449] hub 1-0:1.0: port 2: status 0503 ch
ange 0000
<7>[ 9974.669422] [0: kworker/u16:6:32449] usb 1-2: finish resume
<7>[ 9974.669508] [1:
khubd: 742] hub 1-0:1.0: state 7 ports 2 chg 00
00 evt 0000

<6>[ 9974.672464] [0: kworker/u16:6:32449]


<6>[ 9974.672589] [0: kworker/u16:6:32449]
<6>[ 9975.018137] [1:
kworker/1:4:14113]
=> (set_volt: 637500, get_volt: 637500)
<6>[ 9975.018777] [1:
kworker/1:4:14113]
volt: 650000, get_volt: 650000)
<6>[ 9975.019597] [1:
kworker/1:4:14113]
=> 650000
<6>[ 9975.019625] [1:
kworker/1:4:14113]
emp : 32
<7>[ 9975.181533] [0:
kworker/0:2:31050]
<7>[ 9975.192665] [0:
kworker/0:2:31050]
<7>[ 9975.192745] [0:
kworker/0:2:31050]
1
<7>[ 9975.192795] [0:
kworker/0:2:31050]
hub
<3>[ 9975.193589] [0:
kworker/0:2:31050]
time_suspend
<7>[ 9975.205946] [0:
kworker/0:2:31050]
amsung_usb2phy_runtime_suspend
<6>[ 9975.206023] [0:
kworker/0:2:31050]
<6>[ 9975.206069] [0:
kworker/0:2:31050]
child=0
<6>[ 9975.742862] [0: system_server: 4318]
21.660277611 UTC
<6>[ 9975.742919] [0: system_server: 4318]
<7>[ 9975.752644] [0: system_server: 4318]
<6>[ 9975.752984] [1: system_server: 4318]
ynamic_hotplug CMD_SLEEP_PREPARE
<6>[ 9975.753035] [1: system_server: 4318]
leep_prepare_cpus : 5
<6>[ 9975.753223] [0: thread_hotplug:18168]
<6>[ 9975.763925] [0: system_server: 4318]
> (set_volt: 612500, get_volt: 612500)
<6>[ 9975.764867] [0: system_server: 4318]
=> (set_volt: 687500, get_volt: 687500)
<6>[ 9975.766002] [0: system_server: 4318]
> 687500
<6>[ 9975.766057] [0: system_server: 4318]
<6>[ 9975.766111] [0: system_server: 4318]
uest
<3>[ 9975.768152] [1:
mdm_helper: 3355]
<4>[ 9975.767487] [0: system_server: 4318]
elapsed 0.009 seconds) done.
<4>[ 9975.776863] [0: system_server: 4318]
... (elapsed 0.009 seconds) done.
<7>[ 9975.786362] [0: system_server: 4318]
<4>[ 9975.786403] [0: system_server: 4318]
le_suspend to debug)
<6>[ 9975.788540] [0: system_server: 4318]
os_runtime_resume
<6>[ 9975.791152] [2: kworker/u16:12:32531]
<6>[ 9975.791203] [2: kworker/u16:12:32531]
MHI state 5
<4>[ 9975.791229] [0: system_server: 4318]
0x00000001
<6>[ 9975.791257] [2: kworker/u16:12:32531]
5, Pending M0 0 Pending M3 0
<6>[ 9975.791291] [2: kworker/u16:12:32531]
state 0.

[CHKRA:5]>
mdm_hsic_rpm_restart
MIF(635000): unset TMU_COLD: 675000
DISP(100000): unset TMU_COLD: (set_
INT(100000): unset TMU_COLD: 687500
tmu temperature state 1 to 0, cur_t
usb 1-2: usb auto-suspend, wakeup 1
hub 1-0:1.0: hub_suspend
usb usb1: bus auto-suspend, wakeup
s5p-ehci 15510000.usb: suspend root
s5p-ehci 15510000.usb: s5p_ehci_run
samsung-usb2phy 15530000.usb2phy: s
request_active_lock_release
s5p_ehci_runtime_suspend: usage=0,
PM: suspend entry 2016-11-17 16:19:
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
exynos_dm_hotplug_notifier, 958 : d
nr_sleep_prepare_cpus : 4, tmp_nr_s
stopped thread_hotplug
MIF(418000): set TMU_COLD: 575000 =
DISP(100000): set TMU_COLD: 650000
INT(100000): set TMU_COLD: 650000 =
tmu temperature state 0 to 1
mdm_hsic_pm_notify_event: block req
esoc REQ engine released from wait
Freezing user space processes ... (
Freezing remaining freezable tasks
PM: Entering mem sleep
Suspending console(s) (use no_conso
exynos-dwc3 15400000.usb: dwc3_exyn
[mhi_suspend] [mhi_suspend]
[mhi_suspend] Entered, sys state 2,
dhdpcie_send_mb_data: H2D_MB_DATA:
[mhi_initiate_m3] Entered MHI state
[mhi_initiate_m3] MHI state 5, link

<4>[ 9975.795945] [0: system_server:


_D3_INFORM to dongle
<4>[ 9975.797979] I[0:
swapper/0:
<4>[ 9975.798011] I[0:
swapper/0:
Received D3 ACK
<4>[ 9975.798424] [0: system_server:
0x00000008
<4>[ 9975.798789] [0: system_server:
_D0_INFORM_IN_USE to dongle
<4>[ 9975.799364] [0: system_server:
<6>[ 9975.799794] [0: system_server:
43e914e4
<6>[ 9975.799997] [0: system_server:
100146
<6>[ 9975.800208] [0: system_server:
2800003
<6>[ 9975.800417] [0: system_server:
10
<6>[ 9975.800626] [0: system_server:
1c200004
<6>[ 9975.800833] [0: system_server:
0
<6>[ 9975.801045] [0: system_server:
1c400004
<6>[ 9975.801254] [0: system_server:
0
<6>[ 9975.801461] [0: system_server:
0
<6>[ 9975.801672] [0: system_server:
0
<6>[ 9975.801882] [0: system_server:
0
<6>[ 9975.802090] [0: system_server:
77414e4
<6>[ 9975.802300] [0: system_server:
0
<6>[ 9975.802682] [0: system_server:
48
<6>[ 9975.802874] [0: system_server:
0
<6>[ 9975.803090] [0: system_server:
1ed
<6>[ 9975.803301] [0: system_server:
2c10
<6>[ 9975.803512] [0: system_server:
142
<6>[ 9975.803539] [0: system_server:
0
<6>[ 9975.803566] [0: system_server:
0
<6>[ 9975.803721] [0: system_server:
: 400
<6>[ 9975.803928] [0: system_server:
: 1
<6>[ 9975.803956] [0: system_server:
: 0
<6>[ 9975.806656] [0: system_server:
device_vendor_id reg : 43e914e4
<6>[ 9975.806863] [0: system_server:
PMCSR reg value: 4108

4318] dhdpcie_send_mb_data: send H2D_HOST


0] D2H_MB_DATA: 0x00000001
0] dhdpcie_handle_mb_data D2H_MB_DATA:
4318] dhdpcie_send_mb_data: H2D_MB_DATA:
4318] dhdpcie_send_mb_data: send H2D_HOST
4318] dhdpcie_suspend_dev: Enter
4318] pcieh 0001:01:00.0: reg offset: 0:
4318] pcieh 0001:01:00.0: reg offset: 4:
4318] pcieh 0001:01:00.0: reg offset: 8:
4318] pcieh 0001:01:00.0: reg offset: 12:
4318] pcieh 0001:01:00.0: reg offset: 16:
4318] pcieh 0001:01:00.0: reg offset: 20:
4318] pcieh 0001:01:00.0: reg offset: 24:
4318] pcieh 0001:01:00.0: reg offset: 28:
4318] pcieh 0001:01:00.0: reg offset: 32:
4318] pcieh 0001:01:00.0: reg offset: 36:
4318] pcieh 0001:01:00.0: reg offset: 40:
4318] pcieh 0001:01:00.0: reg offset: 44:
4318] pcieh 0001:01:00.0: reg offset: 48:
4318] pcieh 0001:01:00.0: reg offset: 52:
4318] pcieh 0001:01:00.0: reg offset: 56:
4318] pcieh 0001:01:00.0: reg offset: 60:
4318] pcieh 0001:01:00.0: PCI_EXP_DEVCTL:
4318] pcieh 0001:01:00.0: PCI_EXP_LNKCTL:
4318] pcieh 0001:01:00.0: PCI_EXP_SLTCTL:
4318] pcieh 0001:01:00.0: PCI_EXP_RTCTL:
4318] pcieh 0001:01:00.0: PCI_EXP_DEVCTL2
4318] pcieh 0001:01:00.0: PCI_EXP_LNKCTL2
4318] pcieh 0001:01:00.0: PCI_EXP_SLTCTL2
4318] pcieh 0001:01:00.0: [debug] step 1,
4318] pcieh 0001:01:00.0: [debug] step 2,

<6>[ 9975.807073] [0: system_server:


PMCSR reg value: 410b
<6>[ 9975.807248] [0: system_server:
device_vendor_id reg : 43e914e4
<6>[ 9975.819486] [0: system_server:
eg : 410b dev->current_state : 0
<6>[ 9975.819666] [0: system_server:
vendor_id reg : 43e914e4
<6>[ 9975.819724] [0: system_server:
0: a575144d
<6>[ 9975.819761] [0: system_server:
4: 100147
<6>[ 9975.819795] [0: system_server:
8: 6040001
<6>[ 9975.819960] [0: system_server:
12: 10010
<6>[ 9975.819996] [0: system_server:
16: 0
<6>[ 9975.820030] [0: system_server:
20: 0
<6>[ 9975.820066] [0: system_server:
24: 10100
<6>[ 9975.820101] [0: system_server:
28: 0
<6>[ 9975.820136] [0: system_server:
32: 1ff01c00
<6>[ 9975.820301] [0: system_server:
36: 0
<6>[ 9975.820335] [0: system_server:
40: 0
<6>[ 9975.820370] [0: system_server:
44: 0
<6>[ 9975.820405] [0: system_server:
48: 0
<6>[ 9975.820440] [0: system_server:
52: 40
<6>[ 9975.820475] [0: system_server:
56: 0
<6>[ 9975.820640] [0: system_server:
60: 101ed
<6>[ 9975.820676] [0: system_server:
TL: 2010
<6>[ 9975.820711] [0: system_server:
TL: 42
<6>[ 9975.820739] [0: system_server:
TL: 0
<6>[ 9975.820772] [0: system_server:
L: 0
<6>[ 9975.820807] [0: system_server:
TL2: 400
<6>[ 9975.820978] [0: system_server:
TL2: 1
<6>[ 9975.821006] [0: system_server:
TL2: 0
<6>[ 9975.821178] [0: system_server:
sage is ok
<6>[ 9975.821208] [0: system_server:
d Enter_L23_READY DLLP packet
<6>[ 9975.821247] [0: system_server:
pcie_poweroff, start of poweroff, pcie

4318] pcieh 0001:01:00.0: [debug] step 3,


4318] pcieh 0001:01:00.0: [debug] step 4,
4318] pcieh 0001:01:00.0: [debug] pmcsr r
4318] pcieh 0001:01:00.0: [debug] device_
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
4318] pcieport 0001:00:00.0: PCI_EXP_RTCT
4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
4318] exynos-pcie 15660000.pcie1: ack mes
4318] exynos-pcie 15660000.pcie1: receive
4318] exynos-pcie 15660000.pcie1: exynos_
state: 2

<6>[ 9975.821405] [0: system_server: 4318] exynos-pcie 15660000.pcie1: exynos_


pcie_poweroff, end of poweroff, pcie state: 0
<6>[ 9975.826655] [0: system_server: 4318] voltage(793750) + volt_offset(37500
) is bigger than max_volt(793750)
<6>[ 9975.826709] [0: system_server: 4318] voltage(793750) + volt_offset(37500
) is bigger than max_volt(793750)
<6>[ 9975.827954] [0: system_server: 4318] DEVFREQ(MIF): suspend voltage(79375
0 793750)
<6>[ 9975.830766] [0: system_server: 4318] s2m_rtc_update: RTC_UPDATE_REGISTER
check : 0x00
<6>[ 9975.830979] [0: system_server: 4318] s2m-rtc s2m-rtc: s2m_rtc_read_time:
2016-11-17 16:19:21(0x10)PM
<5>[ 9975.831389] [0: system_server: 4318] sd 0:0:0:0: [sda] Synchronizing SCS
I cache
<6>[ 9975.837133] [0: system_server: 4318] s2m_rtc_update: RTC_UPDATE_REGISTER
check : 0x00
<6>[ 9975.837344] [0: system_server: 4318] s2m-rtc s2m-rtc: s2m_rtc_read_time:
2016-11-17 16:19:21(0x10)PM
<6>[ 9975.838661] [0: system_server: 4318] s2m_rtc_update: RTC_UPDATE_REGISTER
check : 0x00
<6>[ 9975.838860] [0: system_server: 4318] s2m-rtc s2m-rtc: s2m_rtc_read_time:
2016-11-17 16:19:21(0x10)PM
<6>[ 9975.838902] [0: system_server: 4318] s2m-rtc s2m-rtc: s2m_rtc_set_alarm:
2016-11-17 16:20:28(0x10)PM
<6>[ 9975.840333] [0: system_server: 4318] s2m_rtc_update: RTC_UPDATE_REGISTER
check : 0x00
<6>[ 9975.841710] [0: system_server: 4318] s2m_rtc_update: RTC_UPDATE_REGISTER
check : 0x00
<6>[ 9975.842319] [0: system_server: 4318] max86900_pm_suspend
<6>[ 9975.842810] [0: system_server: 4318] wake enabled for irq 7
<2>[ 9975.842968] [0: system_server: 4318] --------Si47xx i2c driver Si47xx_su
spend called
<2>[ 9975.842991] [0: system_server: 4318] Si47xx_suspend: device not supporte
d
<6>[ 9975.843043] [0: system_server: 4318] [VIB] max77843_haptic_suspend
<6>[ 9975.843069] [0: system_server: 4318] [VIB] max77843_haptic_i2c 0
<6>[ 9975.844062] [0: system_server: 4318] wake enabled for irq 4
<6>[ 9975.844239] [0: system_server: 4318] vfsspi_regulator_onoff: ocp off, sm
c ret = 0
<6>[ 9975.844378] [0: system_server: 4318] vfsspi_regulator_onoff: off
<6>[ 9975.844419] [0: system_server: 4318] vfsspi_pm_suspend
<6>[ 9975.844496] [0: system_server: 4318] [SSP] ssp_suspend:
<6>[ 9975.851175] [0: system_server: 4318] [SSP] ssp_send_cmd: command 0xd4 0
<6>[ 9975.851463] [0: system_server: 4318] mst_ldo_device_suspend
<6>[ 9975.851533] [0: system_server: 4318] MST_LDO_DRV]]] suspend
<6>[ 9975.851551] [0: system_server: 4318] MST_LDO_DRV]]] suspend success afte
r smc : 122f122
<6>[ 9975.890502] [0: system_server: 4318] [MAX98505_DEBUG] max98505_suspend:
enter
<6>[ 9975.890635] [0: system_server: 4318] pacific-audio sound.34: pacific_sus
pend_post : set AIF1 port slave
<6>[ 9975.890727] [0: system_server: 4318] wake enabled for irq 577
<6>[ 9975.890754] [0: system_server: 4318] wake enabled for irq 580
<4>[ 9975.890796] [0: system_server: 4318] certify_hall_suspend start
<4>[ 9975.890824] [0: system_server: 4318] [keys] certify_hall_suspend certify
_status : 0 (detach)
<4>[ 9975.890858] [0: system_server: 4318] hall_suspend start
<4>[ 9975.890883] [0: system_server: 4318] [keys] hall_suspend flip_status : 1
(open)
<6>[ 9975.905920] [0: system_server: 4318] [MIF] usb_phy_prepare_shutdown

<6>[ 9975.905953] [0: system_server: 4318] dev rdy val = 1


<6>[ 9975.905976] [0: system_server: 4318] set_host_stat:set host port power s
tatus to [0]
<6>[ 9975.935963] [0: system_server: 4318] wait_dev_pwr_stat:[PWR OFF]...
<6>[ 9975.945012] I[0: system_server: 4318] mdm_device_ready_irq_handler, irq:
host ready val : 00000000
<6>[ 9975.945037] I[0: system_server: 4318] mdm_device_ready_irq_handler, irq:
dev ready val : 00000000
<6>[ 9975.965946] [0: system_server: 4318] done
<7>[ 9975.966010] [0: system_server: 4318] samsung-usb2phy 15530000.usb2phy: s
amsung_usb2phy_shutdown: End of setting for shutdown
<6>[ 9975.966333] [0: system_server: 4318] spi suspend is handled in device su
spend, dma mode = 0, bus_num = 3
<6>[ 9975.966369] [0: system_server: 4318] spi suspend is handled in device su
spend, dma mode = 0, bus_num = 1
<6>[ 9975.966496] [0: system_server: 4318] 3s3c24xx_serial_shutdown: port=4 res
et
<6>[ 9975.967822] [0: system_server: 4318] PM: suspend of devices complete aft
er 177.521 msecs
<6>[ 9975.967850] [0: system_server: 4318] ---Enabled regulators--<6>[ 9975.967891] [0: system_server: 4318] LDO1: 1200000uV, 0xffffffea mode, n
ull
<6>[ 9975.970053] [0: system_server: 4318] VDDIO_1.8V_COMP: 1800000uV, 0xfffff
fea mode, null
<6>[ 9975.971032] [0: system_server: 4318] VDDD_RET_1.0V_COMP: 700000uV, 0xfff
fffea mode, null
<6>[ 9975.973113] [0: system_server: 4318] VDD20_1P8_AP: 1800000uV, 0xffffffea
mode, null
<6>[ 9975.973817] [0: system_server: 4318] VCC_1.8V_CODEC_PMIC: 1800000uV, 0xf
fffffea mode, spi0.0-DBVDD1, spi0.0-AVDD, regulator.47-SUPPLY
<6>[ 9975.975594] [0: system_server: 4318] regulator-dummy: -22uV, 0xffffffea
mode, null
<6>[ 9975.975621] [0: system_server: 4318] Always On regulator count :10 [VDD2
2_1P1_2MIC][vdd_ldo8][vdd_mldo][vdd_lldo][vdd_disp_cam0][vdd_int][vdd_apollo][vd
d_atlas][vdd_mif][safeout1_range]
<6>[ 9975.975644] [0: system_server: 4318] ---Enabled regulator count: 16--<6>[ 9975.977967] [0: system_server: 4318] PM: late suspend of devices complet
e after 2.290 msecs
<6>[ 9975.979159] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
0: ffffffff
<6>[ 9975.979191] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
4: ffffffff
<6>[ 9975.979220] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
8: ffffffff
<6>[ 9975.979249] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
12: ffffffff
<6>[ 9975.979278] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
16: ffffffff
<6>[ 9975.979307] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
20: ffffffff
<6>[ 9975.979335] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
24: ffffffff
<6>[ 9975.979363] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
28: ffffffff
<6>[ 9975.979391] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
32: ffffffff
<6>[ 9975.979420] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
36: ffffffff
<6>[ 9975.979448] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
40: ffffffff

<6>[ 9975.979476] [0: system_server:


44: ffffffff
<6>[ 9975.979504] [0: system_server:
48: ffffffff
<6>[ 9975.979533] [0: system_server:
52: ffffffff
<6>[ 9975.979561] [0: system_server:
56: ffffffff
<6>[ 9975.979590] [0: system_server:
60: ffffffff
<6>[ 9975.979618] [0: system_server:
TL: 0
<6>[ 9975.979646] [0: system_server:
TL: 0
<6>[ 9975.979674] [0: system_server:
TL: 0
<6>[ 9975.979701] [0: system_server:
L: 0
<6>[ 9975.979729] [0: system_server:
TL2: 0
<6>[ 9975.979755] [0: system_server:
TL2: 0
<6>[ 9975.979782] [0: system_server:
TL2: 0
<6>[ 9975.981018] [0: system_server:
eady off
<6>[ 9975.981051] [0: system_server:
eady off
<6>[ 9975.981239] [0: system_server:
oirq, dma mode = 1, bus_num = 4
<6>[ 9975.981277] [0: system_server:
oirq, dma mode = 1, bus_num = 0
<6>[ 9975.981584] [0: system_server:
te after 3.580 msecs
<4>[ 9975.981611] [0: system_server:
<6>[ 9975.982036] [0: system_server:
0, active_cpu=0x00000001
<6>[ 9975.982136] [1:
mc_fastcall:
<5>[ 9975.985275] [0: system_server:
<5>[ 9975.989300] [0: system_server:
<5>[ 9975.993361] [0: system_server:
<5>[ 9975.996027] [0: system_server:
<6>[ 9975.997214] [0: system_server:
<6>[ 9975.997214] [0: system_server:
<6>[ 9975.997214] [0: system_server:
<6>[ 9975.997214] [0: system_server:
ost_wake
<6>[ 9975.997214] [0: system_server:
<6>[ 9975.997360] [0: system_server:
<4>[ 9975.997513] [1:
swapper/1:
<6>[ 9975.998064] [0: system_server:
1, active_cpu=0x00000000
<6>[ 9975.998114] [0:
mc_fastcall:
<6>[ 9975.998150] [0: system_server:
<4>[ 9975.998271] [2:
swapper/2:
<6>[ 9975.998823] [0: system_server:
<4>[ 9975.998943] [3:
swapper/3:
<6>[ 9975.999634] [0: system_server:
<4>[ 9975.999853] [4:
swapper/4:
<6>[ 9976.000619] [0: system_server:

4318] pcieport 0001:00:00.0: reg offset:


4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
4318] pcieport 0001:00:00.0: PCI_EXP_RTCT
4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
4318] exynos-pcie 15660000.pcie1: RC1 alr
4318] exynos-pcie 10ee0000.pcie0: RC0 alr
4318] spi suspend is handled in suspend_n
4318] spi suspend is handled in suspend_n
4318] PM: noirq suspend of devices comple
4318] Disabling non-boot CPUs ...
4318] MobiCore mcd: <- core_num=0x0000000
1747]
4318]
4318]
4318]
4318]
4318]
4318]
4318]
4318]

MobiCore mcd: CoreSwap ok 1 -> 0


CPU1: shutdown
CPU2: shutdown
CPU3: shutdown
CPU4: shutdown
[MIF] 1552000Khz
WAKEUP_STAT: 0x80000001
EINT_PEND: 0x00, 0x40 0x08, 0x00
Resume caused by IRQ 586, dhdpcie_h

4318]
4318]
0]
4318]

Suspended for 0.000 seconds


Enabling non-boot CPUs ...
CPU1: Booted secondary processor
MobiCore mcd: <- core_num=0x0000000

1747]
4318]
0]
4318]
0]
4318]
0]
4318]

MobiCore mcd: CoreSwap


CPU1 is up
CPU2: Booted secondary
CPU2 is up
CPU3: Booted secondary
CPU3 is up
CPU4: Booted secondary
CPU4 is up

ok 0 -> 1
processor
processor
processor

<6>[ 9976.000821] [0: system_server: 4318] spi resume is handled in resume_noi


rq, dma mode = 1, bus_num = 0
<6>[ 9976.000877] [0: system_server: 4318] spi resume is handled in resume_noi
rq, dma mode = 1, bus_num = 4
<6>[ 9976.015730] [1: system_server: 4318] pcieport 0001:00:00.0: [debug] pmcs
r reg : ffff dev->current_state : 3
<6>[ 9976.015744] [1: system_server: 4318] pcieport 0001:00:00.0: [debug] devi
ce_vendor_id reg : ffffffff
<6>[ 9976.015756] [1: system_server: 4318] pcieport 0001:00:00.0: Refused to c
hange power state, currently in D3, PCI_PM_CTRL=ffff
<6>[ 9976.015768] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL: 0
<6>[ 9976.015778] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL: 0
<6>[ 9976.015788] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL: 0
<6>[ 9976.015797] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_RTCT
L: 0
<6>[ 9976.015807] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL2: 0
<6>[ 9976.015816] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL2: 0
<6>[ 9976.015825] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL2: 0
<6>[ 9976.015836] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x3c (was 0xffffffff, writing 0xffffffff)
<6>[ 9976.015848] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x38 (was 0xffffffff, writing 0xffffffff)
<6>[ 9976.015859] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x34 (was 0xffffffff, writing 0xffffffff)
<6>[ 9976.015870] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x30 (was 0xffffffff, writing 0xffffffff)
<6>[ 9976.015881] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x2c (was 0xffffffff, writing 0xffffffff)
<6>[ 9976.015892] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x28 (was 0xffffffff, writing 0xffffffff)
<6>[ 9976.015903] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x24 (was 0xffffffff, writing 0xffffffff)
<6>[ 9976.015915] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x20 (was 0xffffffff, writing 0xffffffff)
<6>[ 9976.015925] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x1c (was 0xffffffff, writing 0xffffffff)
<6>[ 9976.015936] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x18 (was 0xffffffff, writing 0xffffffff)
<6>[ 9976.015948] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x14 (was 0xffffffff, writing 0xffffffff)
<6>[ 9976.015958] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x10 (was 0xffffffff, writing 0xffffffff)
<6>[ 9976.015968] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0xc (was 0xffffffff, writing 0xffffffff)
<6>[ 9976.015979] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x8 (was 0xffffffff, writing 0xffffffff)
<6>[ 9976.015990] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x4 (was 0xffffffff, writing 0xffffffff)
<6>[ 9976.016000] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x0 (was 0xffffffff, writing 0xffffffff)
<6>[ 9976.016022] [1: system_server: 4318] pcieh 0001:01:00.0: [debug] step 1,
device_vendor_id reg : ffffffff
<6>[ 9976.016033] [1: system_server: 4318] pcieh 0001:01:00.0: [debug] step 2,
PMCSR reg value: ffff

<6>[ 9976.016042] [1: system_server: 4318] pcieh 0001:01:00.0: [debug] step 3,


PMCSR reg value: 0
<6>[ 9976.016052] [1: system_server: 4318] pcieh 0001:01:00.0: [debug] step 4,
device_vendor_id reg : ffffffff
<6>[ 9976.029035] [1: system_server: 4318] pcieh 0001:01:00.0: [debug] pmcsr r
eg : ffff dev->current_state : 3
<6>[ 9976.029046] [1: system_server: 4318] pcieh 0001:01:00.0: [debug] device_
vendor_id reg : ffffffff
<6>[ 9976.029057] [1: system_server: 4318] pcieh 0001:01:00.0: Refused to chan
ge power state, currently in D3, PCI_PM_CTRL=ffff
<6>[ 9976.029069] [1: system_server: 4318] exynos-pcie 15660000.pcie1: PCIE li
nk state is 0
<6>[ 9976.029080] [1: system_server: 4318] pcieh 0001:01:00.0: [debug] setp 5,
PMCSR reg value: ffff
<6>[ 9976.029091] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_DEVCTL:
2c10
<6>[ 9976.029101] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_LNKCTL:
142
<6>[ 9976.029110] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_SLTCTL:
0
<6>[ 9976.029119] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_RTCTL:
0
<6>[ 9976.029129] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_DEVCTL2
: 400
<6>[ 9976.029139] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_LNKCTL2
: 1
<6>[ 9976.029148] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_SLTCTL2
: 0
<6>[ 9976.029159] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x3c (was 0xffffffff, writing 0x1ed)
<6>[ 9976.029171] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x38 (was 0xffffffff, writing 0x0)
<6>[ 9976.029182] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x34 (was 0xffffffff, writing 0x48)
<6>[ 9976.029193] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x30 (was 0xffffffff, writing 0x0)
<6>[ 9976.029204] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x2c (was 0xffffffff, writing 0x77414e4)
<6>[ 9976.029215] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x28 (was 0xffffffff, writing 0x0)
<6>[ 9976.029226] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x24 (was 0xffffffff, writing 0x0)
<6>[ 9976.059196] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x20 (was 0xffffffff, writing 0x0)
<6>[ 9976.089166] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x1c (was 0xffffffff, writing 0x0)
<6>[ 9976.119135] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x18 (was 0xffffffff, writing 0x1c400004)
<6>[ 9976.149104] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x14 (was 0xffffffff, writing 0x0)
<6>[ 9976.179073] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x10 (was 0xffffffff, writing 0x1c200004)
<6>[ 9976.209042] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0xc (was 0xffffffff, writing 0x10)
<6>[ 9976.209053] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x8 (was 0xffffffff, writing 0x2800003)
<6>[ 9976.209065] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x4 (was 0xffffffff, writing 0x100146)
<6>[ 9976.209077] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x0 (was 0xffffffff, writing 0x43e914e4)

<6>[ 9976.222373] [1: system_server: 4318] pcieport 0000:00:00.0: [debug] pmcs


r reg : ffff dev->current_state : 3
<6>[ 9976.222384] [1: system_server: 4318] pcieport 0000:00:00.0: [debug] devi
ce_vendor_id reg : ffffffff
<6>[ 9976.222394] [1: system_server: 4318] pcieport 0000:00:00.0: Refused to c
hange power state, currently in D3, PCI_PM_CTRL=ffff
<6>[ 9976.235698] [1: system_server: 4318] mhi 0000:01:00.0: [debug] pmcsr reg
: ffff dev->current_state : 3
<6>[ 9976.235709] [1: system_server: 4318] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : ffffffff
<6>[ 9976.235720] [1: system_server: 4318] mhi 0000:01:00.0: Refused to change
power state, currently in D3, PCI_PM_CTRL=ffff
<6>[ 9976.235845] [1: system_server: 4318] PM: noirq resume of devices complet
e after 235.212 msecs
<6>[ 9976.236323] [1: system_server: 4318] exynos-mailbox 11240000.mailbox: Lo
ading APM firmware ...
<6>[ 9976.236490] [1: system_server: 4318] OK
<6>[ 9976.237587] [1: system_server: 4318] PM: early resume of devices complet
e after 1.370 msecs
<6>[ 9976.237851] [2: kworker/u16:12:32531] [mhi_resume] [mhi_resume]
<6>[ 9976.237868] [2: kworker/u16:12:32531] [mhi_initiate_m0] Entered MHI state
5, Pending M0 0 Pending M3 0
<6>[ 9976.237880] [2: kworker/u16:12:32531] [mhi_initiate_m0] Waiting for M0 M1
or M3. Currently 5...
<6>[ 9976.237890] [2: kworker/u16:12:32531] [mhi_initiate_m0] Wait complete sta
te: 5
<6>[ 9976.237899] [2: kworker/u16:12:32531] [mhi_turn_on_pcie_link] Entered...
<6>[ 9976.237915] [2: kworker/u16:12:32531] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, start of poweron, pcie state: 0
<6>[ 9976.238070] [1: system_server: 4318] s3c2410_wdt: watchdog enabled
<6>[ 9976.241500] [1: system_server: 4318] spi resume is handled in device res
ume, dma mode = 0, bus_num = 1
<6>[ 9976.241536] [1: system_server: 4318] spi resume is handled in device res
ume, dma mode = 0, bus_num = 3
<7>[ 9976.241768] [1: system_server: 4318] samsung-usb2phy 15530000.usb2phy: C
an't configure specified phy mode
<7>[ 9976.241787] [1: system_server: 4318] samsung-usb2phy 15530000.usb2phy: e
nd of samsung_usb2phy_init
<7>[ 9976.241802] [1: system_server: 4318] samsung-usb2phy 15530000.usb2phy: s
amsung_usb2phy_runtime_resume
<4>[ 9976.241823] [1: system_server: 4318] usb usb1: root hub lost power or wa
s reset
<7>[ 9976.241846] [1: system_server: 4318] s5p-ehci 15510000.usb: reset comman
d 0080b02 park=3 ithresh=8 period=1024 Reset HALT
<6>[ 9976.241863] [1: system_server: 4318] dev rdy val = 0
<6>[ 9976.241870] [1: system_server: 4318] set_host_stat:set host port power s
tatus to [1]
<6>[ 9976.241881] [1: system_server: 4318] wait_dev_pwr_stat:[PWR ON]...
<6>[ 9976.263283] I[0:
swapper/0:
0] mdm_device_ready_irq_handler, irq:
host ready val : 00000001
<6>[ 9976.263294] I[0:
swapper/0:
0] mdm_device_ready_irq_handler, irq:
dev ready val : 00000001
<6>[ 9976.271843] [1: system_server: 4318] done
<7>[ 9976.271880] [3: kworker/u16:24:32548] usb usb1: usb resume
<7>[ 9976.271894] [3: kworker/u16:24:32548] s5p-ehci 15510000.usb: resume root
hub after power loss
<7>[ 9976.271906] [3: kworker/u16:24:32548] s5p-ehci 15510000.usb: LRESET 0
<7>[ 9976.271929] [3: kworker/u16:24:32548] hub 1-0:1.0: hub_reset_resume
<7>[ 9976.271939] [3: kworker/u16:24:32548] hub 1-0:1.0: enabling power on all
ports

<6>[ 9976.276059] [2: kworker/u16:12:32531] exynos-pcie 10ee0000.pcie0: D state


: 0, f8c000
<6>[ 9976.288326] [2: kworker/u16:12:32531] exynos-pcie 10ee0000.pcie0: exynos_
pcie_reset: Link up : 0x03740a11
<6>[ 9976.288559] [2: kworker/u16:12:32531] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, end of poweron, pcie state: 3
<6>[ 9976.299246] [2: kworker/u16:12:32531] mhi 0000:01:00.0: [debug] pmcsr reg
: 8 dev->current_state : 3
<6>[ 9976.299426] [2: kworker/u16:12:32531] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9976.299437] [2: kworker/u16:12:32531] exynos-pcie 10ee0000.pcie0: Recover
y for the link of RC0
<6>[ 9976.299448] [2: kworker/u16:12:32531] exynos-pcie 10ee0000.pcie0: Recover
config space of RC0 and its EP
<6>[ 9976.299457] [2: kworker/u16:12:32531] exynos-pcie 10ee0000.pcie0: Recover
RC0
<6>[ 9976.299484] [2: kworker/u16:12:32531] exynos-pcie 10ee0000.pcie0: Recover
EP of RC0
<6>[ 9976.299876] [2: kworker/u16:12:32531] exynos-pcie 10ee0000.pcie0: Refresh
ing the saved config space in PCI framework for RC0 and its EP
<7>[ 9976.302401] [3: kworker/u16:24:32548] s5p-ehci 15510000.usb: GetStatus po
rt:2 status 001803 0 ACK POWER sig=j CSC CONNECT
<7>[ 9976.302415] [3: kworker/u16:24:32548] hub 1-0:1.0: port 2: status 0501 ch
ange 0001
<7>[ 9976.302487] [1: kworker/u16:4:17972] usb 1-2: finish reset-resume
<6>[ 9976.305089] [2: kworker/u16:12:32531] [mhi_turn_on_pcie_link] Exited...
<6>[ 9976.305102] [2: kworker/u16:12:32531] [mhi_initiate_m0] Setting M0 ...
<6>[ 9976.305253] [2: kworker/u16:12:32531] [mhi_initiate_m0] Exited...
<6>[ 9976.309673] [0: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 5 link 1, ring type 2, index 0 db 0x5fa26f80
<6>[ 9976.309688] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9976.309720] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9976.309731] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9976.309741] [2:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9976.310216] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9976.310225] [3: kworker/u16:12:32531] [mhi_resume] Wait complete state: 2
<4>[ 9976.322467] [0: system_server: 4318] ufs_get_device_info: UNIQUE NUMBER
= 02157df271b5cb31 , LT: 0x22
<6>[ 9976.326173] [0: system_server: 4318] exynos-ufs 15570000.ufs: Power mode
change(0): M(1)G(2)L(2)HS-series(2)
<4>[ 9976.326517] [0: system_server: 4318] hall_resume start
<4>[ 9976.326528] [0: system_server: 4318] [keys] hall_resume flip_status : 1
(open)
<4>[ 9976.326544] [0: system_server: 4318] certify_hall_resume start
<4>[ 9976.326553] [0: system_server: 4318] [keys] certify_hall_resume certify_
status : 0 (detach)
<6>[ 9976.326570] [0: system_server: 4318] wake disabled for irq 577
<6>[ 9976.326581] [0: system_server: 4318] wake disabled for irq 580
<6>[ 9976.326705] [0:
kworker/0:2:31050] [MAX98505_DEBUG] max98505_resume: e
nter
<6>[ 9976.330087] [2: system_server: 4318] mst_ldo_device_resume
<6>[ 9976.330125] [2: system_server: 4318] MST_LDO_DRV]]] resume
<6>[ 9976.330131] [2: system_server: 4318] MST_LDO_DRV]]] resume success after
smc : 122f122
<6>[ 9976.332400] [1: system_server: 4318] [SSP] ssp_resume:
<6>[ 9976.338607] [1: system_server: 4318] [SSP] ssp_send_cmd: command 0xd3 0
<3>[ 9976.338637] [1: system_server: 4318] vfsspi_wakeup_daemon send signal fa

iled by wakeup(0)
<6>[ 9976.338667] [1: system_server: 4318] vfsspi_regulator_onoff: ocp on, smc
ret = 0
<6>[ 9976.341718] [1: system_server: 4318] vfsspi_regulator_onoff: on
<6>[ 9976.341733] [1: system_server: 4318] vfsspi_pm_resume
<6>[ 9976.341784] [1: system_server: 4318] wake disabled for irq 4
<6>[ 9976.341820] [1: system_server: 4318] [VIB] max77843_haptic_resume
<2>[ 9976.341835] [1: system_server: 4318] Si47xx_resume: device not supported
<6>[ 9976.341854] [1: system_server: 4318] wake disabled for irq 7
<6>[ 9976.342059] [1: system_server: 4318] max86900_pm_resume
<6>[ 9976.343964] [1: system_server: 4318] s2m_rtc_update: RTC_UPDATE_REGISTER
check : 0x00
<6>[ 9976.344104] [1: system_server: 4318] s2m-rtc s2m-rtc: s2m_rtc_read_time:
2016-11-17 16:19:40(0x10)PM
<6>[ 9976.348540] [1: system_server: 4318] exynos-pcie 15660000.pcie1: exynos_
pcie_poweron, start of poweron, pcie state: 0
<7>[ 9976.355822] [1: kworker/u16:4:17972] s5p-ehci 15510000.usb: port 2 reset
complete, port enabled
<7>[ 9976.355849] [1: kworker/u16:4:17972] s5p-ehci 15510000.usb: GetStatus po
rt:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
<6>[ 9976.369202] [2: kworker/u16:4:17972] usb 1-2: reset high-speed USB devic
e number 2 using s5p-ehci
<6>[ 9976.369417] [1: system_server: 4318] exynos-pcie 15660000.pcie1: D state
: 0, 6ec900
<6>[ 9976.370692] [1: system_server: 4318] exynos-pcie 15660000.pcie1: exynos_
pcie_reset: Link up : 0x03901a11
<6>[ 9976.371013] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL: 2010
<6>[ 9976.371031] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL: 42
<6>[ 9976.371041] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL: 0
<6>[ 9976.371056] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_RTCT
L: 0
<6>[ 9976.371072] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL2: 400
<6>[ 9976.371088] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL2: 1
<6>[ 9976.371098] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL2: 0
<6>[ 9976.371121] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x3c (was 0x1ff, writing 0x101ed)
<6>[ 9976.371147] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x38 (was 0x0, writing 0x0)
<6>[ 9976.371163] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x34 (was 0x40, writing 0x40)
<6>[ 9976.371181] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x30 (was 0x0, writing 0x0)
<6>[ 9976.371197] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x2c (was 0x0, writing 0x0)
<6>[ 9976.371214] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x28 (was 0x0, writing 0x0)
<6>[ 9976.371363] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x24 (was 0x0, writing 0x0)
<6>[ 9976.371381] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x20 (was 0x1ff01c00, writing 0x1ff01c00)
<6>[ 9976.371397] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x1c (was 0x0, writing 0x0)
<6>[ 9976.371415] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x18 (was 0x10100, writing 0x10100)

<6>[ 9976.371432] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co


nfig space at offset 0x14 (was 0x0, writing 0x0)
<6>[ 9976.371450] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x10 (was 0x0, writing 0x0)
<6>[ 9976.371466] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0xc (was 0x10000, writing 0x10010)
<6>[ 9976.371487] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x8 (was 0x1, writing 0x6040001)
<6>[ 9976.371510] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x4 (was 0x100107, writing 0x100147)
<6>[ 9976.371533] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x0 (was 0xa575144d, writing 0xa575144d)
<6>[ 9976.371597] [1: system_server: 4318] exynos-pcie 15660000.pcie1: exynos_
pcie_poweron, end of poweron, pcie state: 3
<4>[ 9976.371615] [1: system_server: 4318] dhdpcie_resume_dev: Enter
<6>[ 9976.371767] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_DEVCTL:
2c10
<6>[ 9976.371870] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_LNKCTL:
142
<6>[ 9976.371880] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_SLTCTL:
0
<6>[ 9976.371890] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_RTCTL:
0
<6>[ 9976.371993] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_DEVCTL2
: 400
<6>[ 9976.372097] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_LNKCTL2
: 1
<6>[ 9976.372106] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_SLTCTL2
: 0
<6>[ 9976.372254] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x3c (was 0x100, writing 0x1ed)
<6>[ 9976.372475] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x38 (was 0x0, writing 0x0)
<6>[ 9976.372580] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x34 (was 0x48, writing 0x48)
<6>[ 9976.372685] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x30 (was 0x0, writing 0x0)
<6>[ 9976.372790] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x2c (was 0x77414e4, writing 0x77414e4)
<6>[ 9976.372895] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x28 (was 0x0, writing 0x0)
<6>[ 9976.373001] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x24 (was 0x0, writing 0x0)
<6>[ 9976.373105] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x20 (was 0x0, writing 0x0)
<6>[ 9976.373211] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x1c (was 0x0, writing 0x0)
<6>[ 9976.373316] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x18 (was 0x4, writing 0x1c400004)
<6>[ 9976.373559] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x18 (writing 0x1c400004)
<6>[ 9976.373708] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x14 (was 0x0, writing 0x0)
<6>[ 9976.373813] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x10 (was 0x4, writing 0x1c200004)
<6>[ 9976.374011] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x10 (writing 0x1c200004)
<6>[ 9976.374116] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0xc (was 0x0, writing 0x10)
<6>[ 9976.374317] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi

g space at offset 0x8 (was 0x2800003, writing 0x2800003)


<6>[ 9976.374422] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x4 (was 0x100000, writing 0x100146)
<6>[ 9976.374620] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x0 (was 0x43e914e4, writing 0x43e914e4)
<4>[ 9976.376125] [1: system_server: 4318] dhdpcie_send_mb_data: H2D_MB_DATA:
0x00000010
<4>[ 9976.376160] [1: system_server: 4318] dhdpcie_send_mb_data: send H2D_HOST
_D0_INFORM to dongle
<7>[ 9976.387257] [0: kworker/u16:4:17972] usb 1-2: USB quirks for this device
: 100
<6>[ 9976.392108] [0: kworker/u16:4:17972] [CHKRA:5]>
<6>[ 9976.392691] [0: system_server: 4318] PM: resume of devices complete afte
r 155.084 msecs
<6>[ 9976.393069] I[0: system_server: 4318] [NACB:5]<
<6>[ 9976.393079] I[0: system_server: 4318] notification_available_cb: set lpa
handling to false
<6>[ 9976.393110] I[0: system_server: 4318] [CHKRA:5]>
<7>[ 9976.398281] [0: system_server: 4318] PM: Finishing wakeup.
<7>[ 9976.399618] [2:
khubd: 742] hub 1-0:1.0: state 7 ports 2 chg 00
04 evt 0000
<6>[ 9976.399685] [2:
khubd: 742] hub 1-0:1.0: port 2, status 0503, c
hange 0000, 480 Mb/s
<3>[ 9976.402541] [1:
mdm_helper: 3355] esoc REQ enginer waiting on request
<4>[ 9976.398297] [0: system_server: 4318] Restarting tasks ... done.
<6>[ 9976.404799] [1:onic.tuiservice: 659] t-base-tui module: ioctl 0x80047402
<6>[ 9976.404854] [1:onic.tuiservice: 659]
<6>[ 9976.405525] [0: thread_hotplug:18194]
1, exe_cmd 4
<6>[ 9976.405548] [0: thread_hotplug:18194]
dm_hotplug disable = 0
<6>[ 9976.405561] [0: thread_hotplug:18194]
<6>[ 9976.405634] [0:
kworker/0:0:13589]
os_runtime_suspend
<6>[ 9976.408863] [0: system_server: 4318]
equest
<6>[ 9976.408894] [0: system_server: 4318]
<7>[ 9976.409709] [0:
kworker/0:2:31050]
to (273, 0x1b4c)
<6>[ 9976.411145] [0:
kworker/0:2:31050]
0_REG(0x1603), QRTABLE30_REG(0x1005)
<6>[ 9976.411833] [3: system_server: 4318]
0.682659978 UTC
<6>[ 9976.413280] [0:
kworker/0:2:31050]
changed
<6>[ 9976.413317] [0:
kworker/0:2:31050]
Tbat:273)
<6>[ 9976.413422] [0:
kworker/0:2:31050]
sleep_mode = 0
<6>[ 9976.413452] [0:
kworker/0:2:31050]
<6>[ 9976.417614]
sleep_mode = 0
<12>[ 9976.418164]
3 h=2 st=3 c=0 o=1
<12>[ 9976.418211]
3 h=2 st=3 c=0 o=1
sec=0 chg=
<14>[ 9976.418244]

[1:

TUI_IO_WAITCMD
frequency info : 1200000, prev_cmd
lcd is on : 0, low power mode = 0,
cluster1 cores hotplug out : 0
exynos-dwc3 15400000.usb: dwc3_exyn
mdm_hsic_pm_notify_event: unblock r
request_active_lock_set
max77843_fg_write_temp: temperature
max77843_fg_check_qrtable: QRTABLE2
PM: suspend exit 2016-11-17 16:19:4
power_supply battery: power_supply_
Skip monitor work(68, Vnow:4109mV,
sec_bat_get_property cable type = 1
sec_bat_get_property cable type = 1

healthd: 3346] sec_bat_get_property cable type = 1

[1:
healthd: 3346] healthd: battery l=98 v=4109 t=27.
ca=-403 ct=0 ps=0 chg= 2016-11-17 16:19:40.688930562 UTC
[1:
healthd: 3346] healthd: battery l=98 v=4109 t=27.
ca=-403 ct=0 ps=0 chg= 2016-11-17 16:19:40.688930562 UTC hv=0
[1:

healthd: 3346] healthd-android: healthd_mode_andr

oid_battery_update
<14>[ 9976.418276] [1:
healthd: 3346] BatteryPropertiesRegistrar: notify
Listeners : start
<14>[ 9976.418308] [1:
healthd: 3346] IBatteryPropertiesListener : batte
ryPropertiesChanged!
<14>[ 9976.418308] [1:
healthd: 3346] : BatteryPropertiesRegistrar: noti
fyListeners : done
<6>[ 9976.429187] [1: kworker/u16:14:32535] mdm_hsic_rpm_check
<6>[ 9976.429219] [1: kworker/u16:14:32535] mdm_hsic_rpm_restart
<6>[ 9976.521442] [1: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9976.521606] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[ 9976.521631] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[ 9976.521660] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9976.521862] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[ 9976.906332] [1:
kworker/1:4:14113] MIF(418000): unset TMU_COLD: 612500
=> (set_volt: 575000, get_volt: 575000)
<6>[ 9976.907689] [1:
kworker/1:4:14113] DISP(100000): unset TMU_COLD: (set_
volt: 650000, get_volt: 650000)
<7>[ 9976.908442] [0:
kworker/0:2:31050] usb 1-2: usb auto-suspend, wakeup 1
<6>[ 9976.908788] [1:
kworker/1:4:14113] INT(100000): unset TMU_COLD: 687500
=> 650000
<6>[ 9976.908834] [1:
kworker/1:4:14113] tmu temperature state 1 to 0, cur_t
emp : 31
<7>[ 9976.919162] [0:
kworker/0:2:31050] hub 1-0:1.0: hub_suspend
<7>[ 9976.919229] [0:
kworker/0:2:31050] usb usb1: bus auto-suspend, wakeup
1
<7>[ 9976.919281] [0:
kworker/0:2:31050] s5p-ehci 15510000.usb: suspend root
hub
<3>[ 9976.920457] [0:
kworker/0:2:31050] s5p-ehci 15510000.usb: s5p_ehci_run
time_suspend
<7>[ 9976.932567] [0:
kworker/0:2:31050] samsung-usb2phy 15530000.usb2phy: s
amsung_usb2phy_runtime_suspend
<6>[ 9976.932633] [0:
kworker/0:2:31050] request_active_lock_release
<6>[ 9976.932680] [0:
kworker/0:2:31050] s5p_ehci_runtime_suspend: usage=0,
child=0
<6>[ 9976.986189] [0: system_server: 4318] PM: suspend entry 2016-11-17 16:19:
41.256999579 UTC
<6>[ 9976.986243] [1: system_server: 4318] PM: Syncing filesystems ... done.
<7>[ 9977.003514] [1: system_server: 4318] PM: Preparing system for mem sleep
<6>[ 9977.003894] [2: system_server: 4318] exynos_dm_hotplug_notifier, 958 : d
ynamic_hotplug CMD_SLEEP_PREPARE
<6>[ 9977.003944] [2: system_server: 4318] nr_sleep_prepare_cpus : 4, tmp_nr_s
leep_prepare_cpus : 5
<6>[ 9977.004139] [0: thread_hotplug:18194] stopped thread_hotplug
<6>[ 9977.016210] [2: system_server: 4318] MIF(418000): set TMU_COLD: 575000 =
> (set_volt: 612500, get_volt: 612500)
<6>[ 9977.017498] [2: system_server: 4318] DISP(100000): set TMU_COLD: 650000
=> (set_volt: 687500, get_volt: 687500)
<6>[ 9977.018675] [2: system_server: 4318] INT(100000): set TMU_COLD: 650000 =
> 687500
<6>[ 9977.018721] [2: system_server: 4318] tmu temperature state 0 to 1
<6>[ 9977.018774] [2: system_server: 4318] mdm_hsic_pm_notify_event: block req
uest
<3>[ 9977.020216] [1:
mdm_helper: 3355] esoc REQ engine released from wait
<4>[ 9977.019565] [2: system_server: 4318] Freezing user space processes ... (

elapsed 0.009 seconds) done.


<4>[ 9977.028770] [2: system_server: 4318] Freezing remaining freezable tasks
... (elapsed 0.009 seconds) done.
<7>[ 9977.038353] [2: system_server: 4318] PM: Entering mem sleep
<4>[ 9977.038395] [2: system_server: 4318] Suspending console(s) (use no_conso
le_suspend to debug)
<6>[ 9977.040609] [2: system_server: 4318] exynos-dwc3 15400000.usb: dwc3_exyn
os_runtime_resume
<6>[ 9977.043163] [1: kworker/u16:18:32540] [mhi_suspend] [mhi_suspend]
<6>[ 9977.043210] [1: kworker/u16:18:32540] [mhi_suspend] Entered, sys state 2,
MHI state 4
<4>[ 9977.043237] [2: system_server: 4318] dhdpcie_send_mb_data: H2D_MB_DATA:
0x00000001
<6>[ 9977.043266] [1: kworker/u16:18:32540] [mhi_initiate_m3] Entered MHI state
4, Pending M0 0 Pending M3 0
<6>[ 9977.043296] [1: kworker/u16:18:32540] [mhi_initiate_m3] Triggering wake o
ut of M2
<4>[ 9977.047832] [2: system_server: 4318] dhdpcie_send_mb_data: send H2D_HOST
_D3_INFORM to dongle
<4>[ 9977.049943] I[0:
swapper/0:
0] D2H_MB_DATA: 0x00000001
<4>[ 9977.049980] I[0:
swapper/0:
0] dhdpcie_handle_mb_data D2H_MB_DATA:
Received D3 ACK
<4>[ 9977.050416] [0: system_server: 4318] dhdpcie_send_mb_data: H2D_MB_DATA:
0x00000008
<4>[ 9977.050782] [0: system_server: 4318] dhdpcie_send_mb_data: send H2D_HOST
_D0_INFORM_IN_USE to dongle
<4>[ 9977.051151] [0: system_server: 4318] dhdpcie_suspend_dev: Enter
<6>[ 9977.051582] [0: system_server: 4318] pcieh 0001:01:00.0: reg offset: 0:
43e914e4
<6>[ 9977.051783] [0: system_server: 4318] pcieh 0001:01:00.0: reg offset: 4:
100146
<6>[ 9977.051992] [0: system_server: 4318] pcieh 0001:01:00.0: reg offset: 8:
2800003
<6>[ 9977.052200] [0: system_server: 4318] pcieh 0001:01:00.0: reg offset: 12:
10
<6>[ 9977.052497] [0: system_server: 4318] pcieh 0001:01:00.0: reg offset: 16:
1c200004
<6>[ 9977.052626] [0: system_server: 4318] pcieh 0001:01:00.0: reg offset: 20:
0
<6>[ 9977.052830] [0: system_server: 4318] pcieh 0001:01:00.0: reg offset: 24:
1c400004
<6>[ 9977.053041] [0: system_server: 4318] pcieh 0001:01:00.0: reg offset: 28:
0
<6>[ 9977.053252] [0: system_server: 4318] pcieh 0001:01:00.0: reg offset: 32:
0
<6>[ 9977.053460] [0: system_server: 4318] pcieh 0001:01:00.0: reg offset: 36:
0
<6>[ 9977.053668] [0: system_server: 4318] pcieh 0001:01:00.0: reg offset: 40:
0
<6>[ 9977.053874] [0: system_server: 4318] pcieh 0001:01:00.0: reg offset: 44:
77414e4
<6>[ 9977.054182] [1: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26fa0
<6>[ 9977.054224] [1: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9977.054249] [0: system_server: 4318] pcieh 0001:01:00.0: reg offset: 48:
0
<6>[ 9977.054350] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9977.054383] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Entered

<6>[ 9977.054411] [2:MHI_STATE_THREA: 4605]


cancelled
<6>[ 9977.054543] [0: system_server: 4318]
48
<6>[ 9977.054707] [0: system_server: 4318]
0
<6>[ 9977.054916] [0: system_server: 4318]
1ed
<6>[ 9977.055128] [0: system_server: 4318]
2c10
<6>[ 9977.055338] [0: system_server: 4318]
142
<6>[ 9977.055365] [0: system_server: 4318]
0
<6>[ 9977.055392] [0: system_server: 4318]
0
<6>[ 9977.055545] [0: system_server: 4318]
: 400
<6>[ 9977.055798] [0: system_server: 4318]
: 1
<6>[ 9977.055826] [0: system_server: 4318]
: 0
<6>[ 9977.058450] [0: system_server: 4318]
device_vendor_id reg : 43e914e4
<6>[ 9977.058655] [0: system_server: 4318]
PMCSR reg value: 4108
<6>[ 9977.058866] [0: system_server: 4318]
PMCSR reg value: 410b
<6>[ 9977.059083] [0: system_server: 4318]
device_vendor_id reg : 43e914e4
<6>[ 9977.059633] [2:MHI_STATE_THREA: 4605]
<6>[ 9977.059659] [1: kworker/u16:18:32540]
r, timer was active
<6>[ 9977.059881] [1: kworker/u16:18:32540]
mpletion.
<6>[ 9977.071755] [0: MHI_EV_THREAD: 4604]
ceived ring 0x0
<6>[ 9977.071835] [2:MHI_STATE_THREA: 4605]
ng to 5
<6>[ 9977.071867] [2:MHI_STATE_THREA: 4605]
M3 state transition
<6>[ 9977.071943] [1: kworker/u16:18:32540]
eived
<6>[ 9977.071986] [1: kworker/u16:18:32540]
<6>[ 9977.072802] [0: system_server: 4318]
eg : 410b dev->current_state : 0
<6>[ 9977.072978] [0: system_server: 4318]
vendor_id reg : 43e914e4
<6>[ 9977.073042] [0: system_server: 4318]
0: a575144d
<6>[ 9977.073077] [0: system_server: 4318]
4: 100147
<6>[ 9977.073111] [0: system_server: 4318]
8: 6040001
<6>[ 9977.073277] [0: system_server: 4318]
12: 10010
<6>[ 9977.073312] [0: system_server: 4318]
16: 0
<6>[ 9977.073347] [0: system_server: 4318]
20: 0

[process_M0_transition] M3 work was


pcieh 0001:01:00.0: reg offset: 52:
pcieh 0001:01:00.0: reg offset: 56:
pcieh 0001:01:00.0: reg offset: 60:
pcieh 0001:01:00.0: PCI_EXP_DEVCTL:
pcieh 0001:01:00.0: PCI_EXP_LNKCTL:
pcieh 0001:01:00.0: PCI_EXP_SLTCTL:
pcieh 0001:01:00.0: PCI_EXP_RTCTL:
pcieh 0001:01:00.0: PCI_EXP_DEVCTL2
pcieh 0001:01:00.0: PCI_EXP_LNKCTL2
pcieh 0001:01:00.0: PCI_EXP_SLTCTL2
pcieh 0001:01:00.0: [debug] step 1,
pcieh 0001:01:00.0: [debug] step 2,
pcieh 0001:01:00.0: [debug] step 3,
pcieh 0001:01:00.0: [debug] step 4,
[process_M0_transition] Exited
[mhi_initiate_m3] Cancelled M1 time
[mhi_initiate_m3] Waiting for M3 co
[mhi_process_event_ring] MHI STE re
[process_stt_work_item] Transitioni
[process_M3_transition] Processing
[mhi_initiate_m3] M3 completion rec
[mhi_turn_off_pcie_link] Entered...
pcieh 0001:01:00.0: [debug] pmcsr r
pcieh 0001:01:00.0: [debug] device_
pcieport 0001:00:00.0: reg offset:
pcieport 0001:00:00.0: reg offset:
pcieport 0001:00:00.0: reg offset:
pcieport 0001:00:00.0: reg offset:
pcieport 0001:00:00.0: reg offset:
pcieport 0001:00:00.0: reg offset:

<6>[ 9977.073382] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:


24: 10100
<6>[ 9977.073417] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
28: 0
<6>[ 9977.073451] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
32: 1ff01c00
<6>[ 9977.073615] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
36: 0
<6>[ 9977.073651] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
40: 0
<6>[ 9977.073686] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
44: 0
<6>[ 9977.073722] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
48: 0
<6>[ 9977.073757] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
52: 40
<6>[ 9977.073792] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
56: 0
<6>[ 9977.073958] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
60: 101ed
<6>[ 9977.073994] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL: 2010
<6>[ 9977.074029] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL: 42
<6>[ 9977.074057] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL: 0
<6>[ 9977.074091] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_RTCT
L: 0
<6>[ 9977.074126] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL2: 400
<6>[ 9977.074293] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL2: 1
<6>[ 9977.074321] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL2: 0
<6>[ 9977.074494] [0: system_server: 4318] exynos-pcie 15660000.pcie1: ack mes
sage is ok
<6>[ 9977.074524] [0: system_server: 4318] exynos-pcie 15660000.pcie1: receive
d Enter_L23_READY DLLP packet
<6>[ 9977.074563] [0: system_server: 4318] exynos-pcie 15660000.pcie1: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[ 9977.074721] [0: system_server: 4318] exynos-pcie 15660000.pcie1: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[ 9977.079931] [0: system_server: 4318] voltage(793750) + volt_offset(37500
) is bigger than max_volt(793750)
<6>[ 9977.079982] [0: system_server: 4318] voltage(793750) + volt_offset(37500
) is bigger than max_volt(793750)
<6>[ 9977.081231] [0: system_server: 4318] DEVFREQ(MIF): suspend voltage(79375
0 793750)
<6>[ 9977.084031] [0: system_server: 4318] s2m_rtc_update: RTC_UPDATE_REGISTER
check : 0x00
<6>[ 9977.084244] [0: system_server: 4318] s2m-rtc s2m-rtc: s2m_rtc_read_time:
2016-11-17 16:19:41(0x10)PM
<5>[ 9977.084657] [0: system_server: 4318] sd 0:0:0:0: [sda] Synchronizing SCS
I cache
<6>[ 9977.085849] [1: kworker/u16:18:32540] mhi 0000:01:00.0: [debug] pmcsr reg
: b dev->current_state : 0
<6>[ 9977.085969] [1: kworker/u16:18:32540] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9977.086052] [1: kworker/u16:18:32540] exynos-pcie 10ee0000.pcie0: ack mes
sage is ok

<6>[ 9977.086081] [1: kworker/u16:18:32540] exynos-pcie 10ee0000.pcie0: receive


d Enter_L23_READY DLLP packet
<6>[ 9977.086117] [1: kworker/u16:18:32540] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[ 9977.086228] [1: kworker/u16:18:32540] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[ 9977.090160] [0: system_server: 4318] s2m_rtc_update: RTC_UPDATE_REGISTER
check : 0x00
<6>[ 9977.090372] [0: system_server: 4318] s2m-rtc s2m-rtc: s2m_rtc_read_time:
2016-11-17 16:19:41(0x10)PM
<6>[ 9977.091690] [0: system_server: 4318] s2m_rtc_update: RTC_UPDATE_REGISTER
check : 0x00
<6>[ 9977.091892] [0: system_server: 4318] s2m-rtc s2m-rtc: s2m_rtc_read_time:
2016-11-17 16:19:41(0x10)PM
<6>[ 9977.091932] [0: system_server: 4318] s2m-rtc s2m-rtc: s2m_rtc_set_alarm:
2016-11-17 16:20:28(0x10)PM
<6>[ 9977.093368] [0: system_server: 4318] s2m_rtc_update: RTC_UPDATE_REGISTER
check : 0x00
<6>[ 9977.094796] [0: system_server: 4318] s2m_rtc_update: RTC_UPDATE_REGISTER
check : 0x00
<6>[ 9977.095414] [0: system_server: 4318] max86900_pm_suspend
<6>[ 9977.095862] [0: system_server: 4318] wake enabled for irq 7
<2>[ 9977.096037] [0: system_server: 4318] --------Si47xx i2c driver Si47xx_su
spend called
<2>[ 9977.096060] [0: system_server: 4318] Si47xx_suspend: device not supporte
d
<6>[ 9977.096112] [0: system_server: 4318] [VIB] max77843_haptic_suspend
<6>[ 9977.096137] [0: system_server: 4318] [VIB] max77843_haptic_i2c 0
<6>[ 9977.097237] [0: system_server: 4318] wake enabled for irq 4
<6>[ 9977.097418] [0: system_server: 4318] vfsspi_regulator_onoff: ocp off, sm
c ret = 0
<6>[ 9977.097441] [0: system_server: 4318] vfsspi_regulator_onoff: off
<6>[ 9977.097476] [0: system_server: 4318] vfsspi_pm_suspend
<6>[ 9977.097574] [0: system_server: 4318] [SSP] ssp_suspend:
<6>[ 9977.104236] [0: system_server: 4318] [SSP] ssp_send_cmd: command 0xd4 0
<6>[ 9977.104532] [0: system_server: 4318] mst_ldo_device_suspend
<6>[ 9977.104605] [0: system_server: 4318] MST_LDO_DRV]]] suspend
<6>[ 9977.104623] [0: system_server: 4318] MST_LDO_DRV]]] suspend success afte
r smc : 122f122
<6>[ 9977.116215] [1: kworker/u16:18:32540] [mhi_turn_off_pcie_link] Exited...
<6>[ 9977.143504] [0: system_server: 4318] [MAX98505_DEBUG] max98505_suspend:
enter
<6>[ 9977.143637] [0: system_server: 4318] pacific-audio sound.34: pacific_sus
pend_post : set AIF1 port slave
<6>[ 9977.143729] [0: system_server: 4318] wake enabled for irq 577
<6>[ 9977.143757] [0: system_server: 4318] wake enabled for irq 580
<4>[ 9977.143798] [0: system_server: 4318] certify_hall_suspend start
<4>[ 9977.143827] [0: system_server: 4318] [keys] certify_hall_suspend certify
_status : 0 (detach)
<4>[ 9977.143861] [0: system_server: 4318] hall_suspend start
<4>[ 9977.143887] [0: system_server: 4318] [keys] hall_suspend flip_status : 1
(open)
<6>[ 9977.157543] [1: system_server: 4318] [MIF] usb_phy_prepare_shutdown
<6>[ 9977.157576] [1: system_server: 4318] dev rdy val = 1
<6>[ 9977.157600] [1: system_server: 4318] set_host_stat:set host port power s
tatus to [0]
<6>[ 9977.187586] [1: system_server: 4318] wait_dev_pwr_stat:[PWR OFF]...
<6>[ 9977.196179] I[0:
swapper/0:
0] mdm_device_ready_irq_handler, irq:
host ready val : 00000000
<6>[ 9977.196206] I[0:
swapper/0:
0] mdm_device_ready_irq_handler, irq:

dev ready val : 00000000


<6>[ 9977.217569] [1: system_server: 4318] done
<7>[ 9977.217632] [1: system_server: 4318] samsung-usb2phy 15530000.usb2phy: s
amsung_usb2phy_shutdown: End of setting for shutdown
<6>[ 9977.217961] [1: system_server: 4318] spi suspend is handled in device su
spend, dma mode = 0, bus_num = 3
<6>[ 9977.217997] [1: system_server: 4318] spi suspend is handled in device su
spend, dma mode = 0, bus_num = 1
<6>[ 9977.218152] [1: system_server: 4318] 3s3c24xx_serial_shutdown: port=4 res
et
<6>[ 9977.219550] [1: system_server: 4318] PM: suspend of devices complete aft
er 177.229 msecs
<6>[ 9977.219577] [1: system_server: 4318] ---Enabled regulators--<6>[ 9977.219618] [1: system_server: 4318] LDO1: 1200000uV, 0xffffffea mode, n
ull
<6>[ 9977.221898] [0: system_server: 4318] VDDIO_1.8V_COMP: 1800000uV, 0xfffff
fea mode, null
<6>[ 9977.222976] [0: system_server: 4318] VDDD_RET_1.0V_COMP: 700000uV, 0xfff
fffea mode, null
<6>[ 9977.225111] [0: system_server: 4318] VDD20_1P8_AP: 1800000uV, 0xffffffea
mode, null
<6>[ 9977.225873] [0: system_server: 4318] VCC_1.8V_CODEC_PMIC: 1800000uV, 0xf
fffffea mode, spi0.0-DBVDD1, spi0.0-AVDD, regulator.47-SUPPLY
<6>[ 9977.227735] [0: system_server: 4318] regulator-dummy: -22uV, 0xffffffea
mode, null
<6>[ 9977.227761] [0: system_server: 4318] Always On regulator count :10 [VDD2
2_1P1_2MIC][vdd_ldo8][vdd_mldo][vdd_lldo][vdd_disp_cam0][vdd_int][vdd_apollo][vd
d_atlas][vdd_mif][safeout1_range]
<6>[ 9977.227784] [0: system_server: 4318] ---Enabled regulator count: 16--<6>[ 9977.230082] [0: system_server: 4318] PM: late suspend of devices complet
e after 2.264 msecs
<6>[ 9977.231246] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
0: ffffffff
<6>[ 9977.231277] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
4: ffffffff
<6>[ 9977.231305] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
8: ffffffff
<6>[ 9977.231334] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
12: ffffffff
<6>[ 9977.231362] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
16: ffffffff
<6>[ 9977.231391] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
20: ffffffff
<6>[ 9977.231419] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
24: ffffffff
<6>[ 9977.231447] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
28: ffffffff
<6>[ 9977.231475] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
32: ffffffff
<6>[ 9977.231503] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
36: ffffffff
<6>[ 9977.231530] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
40: ffffffff
<6>[ 9977.231559] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
44: ffffffff
<6>[ 9977.231587] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
48: ffffffff
<6>[ 9977.231615] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
52: ffffffff
<6>[ 9977.231643] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:

56: ffffffff
<6>[ 9977.231671] [0: system_server:
60: ffffffff
<6>[ 9977.231700] [0: system_server:
TL: 0
<6>[ 9977.231728] [0: system_server:
TL: 0
<6>[ 9977.231755] [0: system_server:
TL: 0
<6>[ 9977.231782] [0: system_server:
L: 0
<6>[ 9977.231810] [0: system_server:
TL2: 0
<6>[ 9977.231837] [0: system_server:
TL2: 0
<6>[ 9977.231863] [0: system_server:
TL2: 0
<6>[ 9977.233152] [0: system_server:
eady off
<6>[ 9977.233187] [0: system_server:
eady off
<6>[ 9977.233381] [0: system_server:
oirq, dma mode = 1, bus_num = 4
<6>[ 9977.233418] [0: system_server:
oirq, dma mode = 1, bus_num = 0
<6>[ 9977.233714] [0: system_server:
te after 3.598 msecs
<4>[ 9977.233739] [0: system_server:
<6>[ 9977.234148] [0: system_server:
0, active_cpu=0x00000001
<6>[ 9977.234256] [1:
mc_fastcall:
<5>[ 9977.237390] [2: system_server:
<5>[ 9977.241275] [0: system_server:
<5>[ 9977.244889] [0: system_server:
<5>[ 9977.247344] [0: system_server:
<6>[ 9977.248564] [0: system_server:
<6>[ 9977.248564] [0: system_server:
<6>[ 9977.248564] [0: system_server:
<6>[ 9977.248564] [0: system_server:
ost_wake
<6>[ 9977.248564] [0: system_server:
<6>[ 9977.248711] [0: system_server:
<4>[ 9977.248862] [1:
swapper/1:
<6>[ 9977.249481] [0: system_server:
1, active_cpu=0x00000000
<6>[ 9977.249530] [0:
mc_fastcall:
<6>[ 9977.249566] [0: system_server:
<4>[ 9977.249689] [2:
swapper/2:
<6>[ 9977.250212] [0: system_server:
<4>[ 9977.250333] [3:
swapper/3:
<6>[ 9977.250955] [0: system_server:
<4>[ 9977.251173] [4:
swapper/4:
<6>[ 9977.251928] [0: system_server:
<6>[ 9977.252128] [0: system_server:
rq, dma mode = 1, bus_num = 0
<6>[ 9977.252184] [0: system_server:
rq, dma mode = 1, bus_num = 4
<6>[ 9977.265699] [2: system_server:
r reg : ffff dev->current_state : 3
<6>[ 9977.265712] [2: system_server:

4318] pcieport 0001:00:00.0: reg offset:


4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
4318] pcieport 0001:00:00.0: PCI_EXP_RTCT
4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
4318] exynos-pcie 15660000.pcie1: RC1 alr
4318] exynos-pcie 10ee0000.pcie0: RC0 alr
4318] spi suspend is handled in suspend_n
4318] spi suspend is handled in suspend_n
4318] PM: noirq suspend of devices comple
4318] Disabling non-boot CPUs ...
4318] MobiCore mcd: <- core_num=0x0000000
1747]
4318]
4318]
4318]
4318]
4318]
4318]
4318]
4318]

MobiCore mcd: CoreSwap ok 1 -> 0


CPU1: shutdown
CPU2: shutdown
CPU3: shutdown
CPU4: shutdown
[MIF] 1552000Khz
WAKEUP_STAT: 0x80000001
EINT_PEND: 0x00, 0x40 0x08, 0x00
Resume caused by IRQ 586, dhdpcie_h

4318]
4318]
0]
4318]

Suspended for 0.000 seconds


Enabling non-boot CPUs ...
CPU1: Booted secondary processor
MobiCore mcd: <- core_num=0x0000000

1747]
4318]
0]
4318]
0]
4318]
0]
4318]
4318]

MobiCore mcd: CoreSwap ok 0 -> 1


CPU1 is up
CPU2: Booted secondary processor
CPU2 is up
CPU3: Booted secondary processor
CPU3 is up
CPU4: Booted secondary processor
CPU4 is up
spi resume is handled in resume_noi

4318] spi resume is handled in resume_noi


4318] pcieport 0001:00:00.0: [debug] pmcs
4318] pcieport 0001:00:00.0: [debug] devi

ce_vendor_id reg : ffffffff


<6>[ 9977.265724] [2: system_server: 4318] pcieport 0001:00:00.0: Refused to c
hange power state, currently in D3, PCI_PM_CTRL=ffff
<6>[ 9977.265737] [2: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL: 0
<6>[ 9977.265747] [2: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL: 0
<6>[ 9977.265757] [2: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL: 0
<6>[ 9977.265766] [2: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_RTCT
L: 0
<6>[ 9977.265776] [2: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL2: 0
<6>[ 9977.265785] [2: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL2: 0
<6>[ 9977.265795] [2: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL2: 0
<6>[ 9977.265806] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x3c (was 0xffffffff, writing 0xffffffff)
<6>[ 9977.265817] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x38 (was 0xffffffff, writing 0xffffffff)
<6>[ 9977.265828] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x34 (was 0xffffffff, writing 0xffffffff)
<6>[ 9977.265839] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x30 (was 0xffffffff, writing 0xffffffff)
<6>[ 9977.265850] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x2c (was 0xffffffff, writing 0xffffffff)
<6>[ 9977.265860] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x28 (was 0xffffffff, writing 0xffffffff)
<6>[ 9977.265871] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x24 (was 0xffffffff, writing 0xffffffff)
<6>[ 9977.265882] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x20 (was 0xffffffff, writing 0xffffffff)
<6>[ 9977.265892] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x1c (was 0xffffffff, writing 0xffffffff)
<6>[ 9977.265903] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x18 (was 0xffffffff, writing 0xffffffff)
<6>[ 9977.265914] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x14 (was 0xffffffff, writing 0xffffffff)
<6>[ 9977.265925] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x10 (was 0xffffffff, writing 0xffffffff)
<6>[ 9977.265936] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0xc (was 0xffffffff, writing 0xffffffff)
<6>[ 9977.265947] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x8 (was 0xffffffff, writing 0xffffffff)
<6>[ 9977.265958] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x4 (was 0xffffffff, writing 0xffffffff)
<6>[ 9977.265968] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x0 (was 0xffffffff, writing 0xffffffff)
<6>[ 9977.265992] [2: system_server: 4318] pcieh 0001:01:00.0: [debug] step 1,
device_vendor_id reg : ffffffff
<6>[ 9977.266002] [2: system_server: 4318] pcieh 0001:01:00.0: [debug] step 2,
PMCSR reg value: ffff
<6>[ 9977.266012] [2: system_server: 4318] pcieh 0001:01:00.0: [debug] step 3,
PMCSR reg value: 0
<6>[ 9977.266022] [2: system_server: 4318] pcieh 0001:01:00.0: [debug] step 4,
device_vendor_id reg : ffffffff
<6>[ 9977.279004] [2: system_server: 4318] pcieh 0001:01:00.0: [debug] pmcsr r
eg : ffff dev->current_state : 3
<6>[ 9977.279014] [2: system_server: 4318] pcieh 0001:01:00.0: [debug] device_

vendor_id reg : ffffffff


<6>[ 9977.279024] [2: system_server: 4318] pcieh 0001:01:00.0: Refused to chan
ge power state, currently in D3, PCI_PM_CTRL=ffff
<6>[ 9977.279036] [2: system_server: 4318] exynos-pcie 15660000.pcie1: PCIE li
nk state is 0
<6>[ 9977.279046] [2: system_server: 4318] pcieh 0001:01:00.0: [debug] setp 5,
PMCSR reg value: ffff
<6>[ 9977.279056] [2: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_DEVCTL:
2c10
<6>[ 9977.279065] [2: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_LNKCTL:
142
<6>[ 9977.279075] [2: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_SLTCTL:
0
<6>[ 9977.279084] [2: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_RTCTL:
0
<6>[ 9977.279093] [2: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_DEVCTL2
: 400
<6>[ 9977.279102] [2: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_LNKCTL2
: 1
<6>[ 9977.279111] [2: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_SLTCTL2
: 0
<6>[ 9977.279122] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x3c (was 0xffffffff, writing 0x1ed)
<6>[ 9977.279134] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x38 (was 0xffffffff, writing 0x0)
<6>[ 9977.279145] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x34 (was 0xffffffff, writing 0x48)
<6>[ 9977.279156] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x30 (was 0xffffffff, writing 0x0)
<6>[ 9977.279167] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x2c (was 0xffffffff, writing 0x77414e4)
<6>[ 9977.279177] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x28 (was 0xffffffff, writing 0x0)
<6>[ 9977.279188] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x24 (was 0xffffffff, writing 0x0)
<6>[ 9977.309157] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x20 (was 0xffffffff, writing 0x0)
<6>[ 9977.339126] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x1c (was 0xffffffff, writing 0x0)
<6>[ 9977.369095] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x18 (was 0xffffffff, writing 0x1c400004)
<6>[ 9977.399064] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x14 (was 0xffffffff, writing 0x0)
<6>[ 9977.429032] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x10 (was 0xffffffff, writing 0x1c200004)
<6>[ 9977.459002] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0xc (was 0xffffffff, writing 0x10)
<6>[ 9977.459013] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x8 (was 0xffffffff, writing 0x2800003)
<6>[ 9977.459025] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x4 (was 0xffffffff, writing 0x100146)
<6>[ 9977.459035] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x0 (was 0xffffffff, writing 0x43e914e4)
<6>[ 9977.472345] [2: system_server: 4318] pcieport 0000:00:00.0: [debug] pmcs
r reg : ffff dev->current_state : 3
<6>[ 9977.472356] [2: system_server: 4318] pcieport 0000:00:00.0: [debug] devi
ce_vendor_id reg : ffffffff
<6>[ 9977.472367] [2: system_server: 4318] pcieport 0000:00:00.0: Refused to c
hange power state, currently in D3, PCI_PM_CTRL=ffff
<6>[ 9977.485669] [2: system_server: 4318] mhi 0000:01:00.0: [debug] pmcsr reg

: ffff dev->current_state : 3
<6>[ 9977.485680] [2: system_server: 4318] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : ffffffff
<6>[ 9977.485690] [2: system_server: 4318] mhi 0000:01:00.0: Refused to change
power state, currently in D3, PCI_PM_CTRL=ffff
<6>[ 9977.485808] [2: system_server: 4318] PM: noirq resume of devices complet
e after 233.866 msecs
<6>[ 9977.486284] [2: system_server: 4318] exynos-mailbox 11240000.mailbox: Lo
ading APM firmware ...
<6>[ 9977.486454] [2: system_server: 4318] OK
<6>[ 9977.487548] [2: system_server: 4318] PM: early resume of devices complet
e after 1.370 msecs
<6>[ 9977.487808] [0: kworker/u16:11:32455] [mhi_resume] [mhi_resume]
<6>[ 9977.487825] [0: kworker/u16:11:32455] [mhi_initiate_m0] Entered MHI state
5, Pending M0 0 Pending M3 0
<6>[ 9977.487836] [0: kworker/u16:11:32455] [mhi_initiate_m0] Waiting for M0 M1
or M3. Currently 5...
<6>[ 9977.487846] [0: kworker/u16:11:32455] [mhi_initiate_m0] Wait complete sta
te: 5
<6>[ 9977.487856] [0: kworker/u16:11:32455] [mhi_turn_on_pcie_link] Entered...
<6>[ 9977.487871] [0: kworker/u16:11:32455] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, start of poweron, pcie state: 0
<6>[ 9977.488033] [2: system_server: 4318] s3c2410_wdt: watchdog enabled
<6>[ 9977.491461] [3: system_server: 4318] spi resume is handled in device res
ume, dma mode = 0, bus_num = 1
<6>[ 9977.491498] [3: system_server: 4318] spi resume is handled in device res
ume, dma mode = 0, bus_num = 3
<7>[ 9977.491732] [3: system_server: 4318] samsung-usb2phy 15530000.usb2phy: C
an't configure specified phy mode
<7>[ 9977.491750] [3: system_server: 4318] samsung-usb2phy 15530000.usb2phy: e
nd of samsung_usb2phy_init
<7>[ 9977.491765] [3: system_server: 4318] samsung-usb2phy 15530000.usb2phy: s
amsung_usb2phy_runtime_resume
<4>[ 9977.491787] [3: system_server: 4318] usb usb1: root hub lost power or wa
s reset
<7>[ 9977.491809] [3: system_server: 4318] s5p-ehci 15510000.usb: reset comman
d 0080b02 park=3 ithresh=8 period=1024 Reset HALT
<6>[ 9977.491826] [3: system_server: 4318] dev rdy val = 0
<6>[ 9977.491834] [3: system_server: 4318] set_host_stat:set host port power s
tatus to [1]
<6>[ 9977.491845] [3: system_server: 4318] wait_dev_pwr_stat:[PWR ON]...
<6>[ 9977.513295] I[0:
swapper/0:
0] mdm_device_ready_irq_handler, irq:
host ready val : 00000001
<6>[ 9977.513305] I[0:
swapper/0:
0] mdm_device_ready_irq_handler, irq:
dev ready val : 00000001
<6>[ 9977.521807] [3: system_server: 4318] done
<7>[ 9977.521846] [1: kworker/u16:18:32540] usb usb1: usb resume
<7>[ 9977.521860] [1: kworker/u16:18:32540] s5p-ehci 15510000.usb: resume root
hub after power loss
<7>[ 9977.521872] [1: kworker/u16:18:32540] s5p-ehci 15510000.usb: LRESET 0
<7>[ 9977.521895] [1: kworker/u16:18:32540] hub 1-0:1.0: hub_reset_resume
<7>[ 9977.521906] [1: kworker/u16:18:32540] hub 1-0:1.0: enabling power on all
ports
<6>[ 9977.526033] [0: kworker/u16:11:32455] exynos-pcie 10ee0000.pcie0: D state
: 0, 934300
<6>[ 9977.538327] [1: kworker/u16:11:32455] exynos-pcie 10ee0000.pcie0: exynos_
pcie_reset: Link up : 0x00824811
<6>[ 9977.538562] [1: kworker/u16:11:32455] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, end of poweron, pcie state: 3
<6>[ 9977.538997] [0:
kworker/0:1:25228] sync_system +

<6>[ 9977.539012] [0:


kworker/0:1:25228] sync_system <6>[ 9977.549216] [1: kworker/u16:11:32455] mhi 0000:01:00.0: [debug] pmcsr reg
: 8 dev->current_state : 3
<6>[ 9977.549397] [1: kworker/u16:11:32455] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9977.549409] [1: kworker/u16:11:32455] exynos-pcie 10ee0000.pcie0: Recover
y for the link of RC0
<6>[ 9977.549420] [1: kworker/u16:11:32455] exynos-pcie 10ee0000.pcie0: Recover
config space of RC0 and its EP
<6>[ 9977.549429] [1: kworker/u16:11:32455] exynos-pcie 10ee0000.pcie0: Recover
RC0
<6>[ 9977.549457] [1: kworker/u16:11:32455] exynos-pcie 10ee0000.pcie0: Recover
EP of RC0
<6>[ 9977.549849] [1: kworker/u16:11:32455] exynos-pcie 10ee0000.pcie0: Refresh
ing the saved config space in PCI framework for RC0 and its EP
<7>[ 9977.552510] [2: kworker/u16:18:32540] s5p-ehci 15510000.usb: GetStatus po
rt:2 status 001803 0 ACK POWER sig=j CSC CONNECT
<7>[ 9977.552523] [2: kworker/u16:18:32540] hub 1-0:1.0: port 2: status 0501 ch
ange 0001
<7>[ 9977.552601] [0: kworker/u16:31:32555] usb 1-2: finish reset-resume
<6>[ 9977.555111] [1: kworker/u16:11:32455] [mhi_turn_on_pcie_link] Exited...
<6>[ 9977.555126] [1: kworker/u16:11:32455] [mhi_initiate_m0] Setting M0 ...
<6>[ 9977.555274] [1: kworker/u16:11:32455] [mhi_initiate_m0] Exited...
<6>[ 9977.559630] [0: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 5 link 1, ring type 2, index 0 db 0x5fa26fc0
<6>[ 9977.559644] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9977.559676] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9977.559687] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9977.559698] [2:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9977.560342] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9977.560350] [1: kworker/u16:11:32455] [mhi_resume] Wait complete state: 2
<4>[ 9977.572256] [0: system_server: 4318] ufs_get_device_info: UNIQUE NUMBER
= 02157df271b5cb31 , LT: 0x22
<6>[ 9977.575959] [0: system_server: 4318] exynos-ufs 15570000.ufs: Power mode
change(0): M(1)G(2)L(2)HS-series(2)
<4>[ 9977.576303] [0: system_server: 4318] hall_resume start
<4>[ 9977.576315] [0: system_server: 4318] [keys] hall_resume flip_status : 1
(open)
<4>[ 9977.576331] [0: system_server: 4318] certify_hall_resume start
<4>[ 9977.576340] [0: system_server: 4318] [keys] certify_hall_resume certify_
status : 0 (detach)
<6>[ 9977.576357] [0: system_server: 4318] wake disabled for irq 577
<6>[ 9977.576367] [0: system_server: 4318] wake disabled for irq 580
<6>[ 9977.576493] [0:
kworker/0:0:13589] [MAX98505_DEBUG] max98505_resume: e
nter
<6>[ 9977.582164] [0: system_server: 4318] mst_ldo_device_resume
<6>[ 9977.582204] [0: system_server: 4318] MST_LDO_DRV]]] resume
<6>[ 9977.582210] [0: system_server: 4318] MST_LDO_DRV]]] resume success after
smc : 122f122
<6>[ 9977.582344] [0: system_server: 4318] [SSP] ssp_resume:
<6>[ 9977.588544] [1: system_server: 4318] [SSP] ssp_send_cmd: command 0xd3 0
<3>[ 9977.588575] [1: system_server: 4318] vfsspi_wakeup_daemon send signal fa
iled by wakeup(0)
<6>[ 9977.588606] [1: system_server: 4318] vfsspi_regulator_onoff: ocp on, smc
ret = 0
<6>[ 9977.591648] [2: system_server: 4318] vfsspi_regulator_onoff: on
<6>[ 9977.591664] [2: system_server: 4318] vfsspi_pm_resume

<6>[ 9977.591715] [2: system_server: 4318] wake disabled for irq 4


<6>[ 9977.591750] [2: system_server: 4318] [VIB] max77843_haptic_resume
<2>[ 9977.591766] [2: system_server: 4318] Si47xx_resume: device not supported
<6>[ 9977.591785] [2: system_server: 4318] wake disabled for irq 7
<6>[ 9977.591992] [2: system_server: 4318] max86900_pm_resume
<6>[ 9977.593902] [3: system_server: 4318] s2m_rtc_update: RTC_UPDATE_REGISTER
check : 0x00
<6>[ 9977.594042] [3: system_server: 4318] s2m-rtc s2m-rtc: s2m_rtc_read_time:
2016-11-17 16:19:51(0x10)PM
<6>[ 9977.598567] [3: system_server: 4318] exynos-pcie 15660000.pcie1: exynos_
pcie_poweron, start of poweron, pcie state: 0
<7>[ 9977.605913] [1: kworker/u16:31:32555] s5p-ehci 15510000.usb: port 2 reset
complete, port enabled
<7>[ 9977.605943] [1: kworker/u16:31:32555] s5p-ehci 15510000.usb: GetStatus po
rt:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
<6>[ 9977.619175] [1: kworker/u16:31:32555] usb 1-2: reset high-speed USB devic
e number 2 using s5p-ehci
<6>[ 9977.619454] [3: system_server: 4318] exynos-pcie 15660000.pcie1: D state
: 0, 655400
<6>[ 9977.620728] [3: system_server: 4318] exynos-pcie 15660000.pcie1: exynos_
pcie_reset: Link up : 0x03b30e11
<6>[ 9977.620909] [3: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL: 2010
<6>[ 9977.621055] [3: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL: 42
<6>[ 9977.621065] [3: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL: 0
<6>[ 9977.621081] [3: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_RTCT
L: 0
<6>[ 9977.621096] [3: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL2: 400
<6>[ 9977.621111] [3: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL2: 1
<6>[ 9977.621120] [3: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL2: 0
<6>[ 9977.621143] [3: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x3c (was 0x1ff, writing 0x101ed)
<6>[ 9977.621167] [3: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x38 (was 0x0, writing 0x0)
<6>[ 9977.621184] [3: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x34 (was 0x40, writing 0x40)
<6>[ 9977.621201] [3: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x30 (was 0x0, writing 0x0)
<6>[ 9977.621217] [3: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x2c (was 0x0, writing 0x0)
<6>[ 9977.621234] [3: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x28 (was 0x0, writing 0x0)
<6>[ 9977.621251] [3: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x24 (was 0x0, writing 0x0)
<6>[ 9977.621269] [3: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x20 (was 0x1ff01c00, writing 0x1ff01c00)
<6>[ 9977.621285] [3: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x1c (was 0x0, writing 0x0)
<6>[ 9977.621302] [3: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x18 (was 0x10100, writing 0x10100)
<6>[ 9977.621319] [3: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x14 (was 0x0, writing 0x0)
<6>[ 9977.621336] [3: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x10 (was 0x0, writing 0x0)
<6>[ 9977.621489] [3: system_server: 4318] pcieport 0001:00:00.0: restoring co

nfig space at offset 0xc (was 0x10000, writing 0x10010)


<6>[ 9977.621511] [3: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x8 (was 0x1, writing 0x6040001)
<6>[ 9977.621534] [3: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x4 (was 0x100107, writing 0x100147)
<6>[ 9977.621556] [3: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x0 (was 0xa575144d, writing 0xa575144d)
<6>[ 9977.621620] [3: system_server: 4318] exynos-pcie 15660000.pcie1: exynos_
pcie_poweron, end of poweron, pcie state: 3
<4>[ 9977.621638] [3: system_server: 4318] dhdpcie_resume_dev: Enter
<6>[ 9977.621797] [3: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_DEVCTL:
2c10
<6>[ 9977.621900] [3: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_LNKCTL:
142
<6>[ 9977.621910] [3: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_SLTCTL:
0
<6>[ 9977.621920] [3: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_RTCTL:
0
<6>[ 9977.622074] [3: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_DEVCTL2
: 400
<6>[ 9977.622177] [3: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_LNKCTL2
: 1
<6>[ 9977.622187] [3: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_SLTCTL2
: 0
<6>[ 9977.622589] [3: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x3c (was 0x100, writing 0x1ed)
<6>[ 9977.623344] [3: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x38 (was 0x0, writing 0x0)
<6>[ 9977.623449] [3: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x34 (was 0x48, writing 0x48)
<6>[ 9977.623554] [3: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x30 (was 0x0, writing 0x0)
<6>[ 9977.623659] [3: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x2c (was 0x77414e4, writing 0x77414e4)
<6>[ 9977.624038] [3: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x28 (was 0x0, writing 0x0)
<6>[ 9977.624418] [3: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x24 (was 0x0, writing 0x0)
<6>[ 9977.624796] [3: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x20 (was 0x0, writing 0x0)
<6>[ 9977.624901] [3: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x1c (was 0x0, writing 0x0)
<6>[ 9977.625004] [3: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x18 (was 0x4, writing 0x1c400004)
<6>[ 9977.625202] [3: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x18 (writing 0x1c400004)
<6>[ 9977.625307] [3: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x14 (was 0x0, writing 0x0)
<6>[ 9977.625410] [3: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x10 (was 0x4, writing 0x1c200004)
<6>[ 9977.626186] [3: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x10 (writing 0x1c200004)
<6>[ 9977.626291] [3: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0xc (was 0x0, writing 0x10)
<6>[ 9977.626489] [3: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x8 (was 0x2800003, writing 0x2800003)
<6>[ 9977.626593] [3: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x4 (was 0x100000, writing 0x100146)
<6>[ 9977.626791] [3: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x0 (was 0x43e914e4, writing 0x43e914e4)

<4>[ 9977.628779] [3: system_server: 4318] dhdpcie_send_mb_data: H2D_MB_DATA:


0x00000010
<4>[ 9977.628811] [3: system_server: 4318] dhdpcie_send_mb_data: send H2D_HOST
_D0_INFORM to dongle
<4>[ 9977.632706] I[0:
swapper/0:
0] dhd_prot_flow_ring_delete sending F
LOW RING ID 39 for peer 01:ff:fa prio 3 ifindex 0 Delete req msglen 40
<4>[ 9977.633052] I[0:
swapper/0:
0] dhd_prot_flow_ring_delete sending F
LOW RING ID 40 for peer 33:35:ba prio 0 ifindex 0 Delete req msglen 40
<4>[ 9977.633074] I[0:
swapper/0:
0] dhd_prot_flow_ring_delete sending F
LOW RING ID 41 for peer f4:dd:03 prio 7 ifindex 0 Delete req msglen 40
<6>[ 9977.633599] [0:wl_event_handle: 5324] CFG80211-INFO2) wl_is_linkdown : Li
nk down Reason : WLC_E_DEAUTH_IND
<6>[ 9977.633623] [0:wl_event_handle: 5324] CFG80211-INFO2) wl_notify_connect_s
tatus : link down if wlan0 may call cfg80211_disconnected. event : 6, reason=2 f
rom f4:dd:03
<6>[ 9977.635875] [0:wl_event_handle: 5324] CFG80211-INFO2) wl_get_bss_info : w
pa_auth val 128
<6>[ 9977.635892] [0:wl_event_handle: 5324] CFG80211-INFO2) wl_get_bss_info : B
SSID:f4:dd:03 SSID GRI
<6>[ 9977.635913] [0:wl_event_handle: 5324] CFG80211-INFO2) wl_get_bss_info : f
req:2462, BW:20, RSSI:-54 dBm, Rate:104 Mbps, 11mode:2, stream:1,MU-MIMO:0, Pass
point:0, SNR:0, Noise:-91,
<6>[ 9977.635913] [0:wl_event_handle: 5324] akm:0 roam:0
<4>[ 9977.635953] [0:wl_event_handle: 5324] dhd_prot_ioctl: SET PM to 2
<7>[ 9977.637076] [0: kworker/u16:31:32555] usb 1-2: USB quirks for this device
: 100
<6>[ 9977.639327] [0:wl_event_handle: 5324] CFG80211-INFO2) wl_is_linkdown : Li
nk down Reason : WLC_E_LINK
<4>[ 9977.641144] [0:
kworker/0:0:13589] regulatory is not upadted via resto
re_regulatory_settings.
<6>[ 9977.641950] [0: kworker/u16:31:32555] [CHKRA:5]>
<6>[ 9977.642524] [2: system_server: 4318] PM: resume of devices complete afte
r 154.957 msecs
<6>[ 9977.643036] I[0:
swapper/0:
0] [NACB:5]<
<6>[ 9977.643046] I[0:
swapper/0:
0] notification_available_cb: set lpa
handling to false
<6>[ 9977.643074] I[0:
swapper/0:
0] [CHKRA:5]>
<7>[ 9977.646588] [0:
kworker/0:0:13589] max77843_fg_write_temp: temperature
to (273, 0x1b4c)
<6>[ 9977.647019] [0:
kworker/0:0:13589] max77843_fg_check_qrtable: QRTABLE2
0_REG(0x1603), QRTABLE30_REG(0x1005)
<7>[ 9977.648184] [2: system_server: 4318] PM: Finishing wakeup.
<6>[ 9977.648497] [0:
kworker/0:0:13589] power_supply battery: power_supply_
changed
<6>[ 9977.648521] [0:
kworker/0:0:13589] Skip monitor work(79, Vnow:4071mV,
Tbat:273)
<6>[ 9977.648657] [0:
kworker/0:0:13589] sec_bat_get_property cable type = 1
sleep_mode = 0
<6>[ 9977.648683] [0:
kworker/0:0:13589] sec_bat_get_property cable type = 1
<7>[ 9977.649393] [3:
khubd: 742] hub 1-0:1.0: state 7 ports 2 chg 00
04 evt 0000
<6>[ 9977.649455] [3:
khubd: 742] hub 1-0:1.0: port 2, status 0503, c
hange 0000, 480 Mb/s
<6>[ 9977.651385] [1:
healthd: 3346] sec_bat_get_property cable type = 1
sleep_mode = 0
<12>[ 9977.651940] [1:
healthd: 3346] healthd: battery l=98 v=4071 t=27.
3 h=2 st=3 c=0 o=1 ca=-403 ct=0 ps=0 chg= 2016-11-17 16:19:51.672758353 UTC
<12>[ 9977.651985] [1:
healthd: 3346] healthd: battery l=98 v=4071 t=27.
3 h=2 st=3 c=0 o=1 ca=-403 ct=0 ps=0 chg= 2016-11-17 16:19:51.672758353 UTC hv=0

sec=0 chg=
<14>[ 9977.652013] [1:
healthd: 3346] healthd-android: healthd_mode_andr
oid_battery_update
<14>[ 9977.652039] [1:
healthd: 3346] BatteryPropertiesRegistrar: notify
Listeners : start
<3>[ 9977.652659] [1:
mdm_helper: 3355] esoc REQ enginer waiting on request
<4>[ 9977.648200] [1:
healthd: 3346] Restarting tasks ...
IBatteryPropertiesListener : batteryPropertiesChanged!
<14>[ 9977.653092] [1:
healthd: 3346] : <14>[ 9977.655263] [1:
h
ealthd: 3346] BatteryPropertiesRegistrar: notifyListeners : done
<4>[ 9977.655760] [2: system_server: 4318] done.
<6>[ 9977.658597] [0: wpa_supplicant: 5196] CFG80211-INFO2) wl_cfg80211_get_bss
_info : cmd: f4:0f:1b 2462 20 -54 104 2 1 0 0 0 -91 0 0
<6>[ 9977.660242] [1:onic.tuiservice: 659] t-base-tui module: ioctl 0x80047402
<6>[ 9977.660307] [1:onic.tuiservice: 659] TUI_IO_WAITCMD
<6>[ 9977.661323] [2: system_server: 4318] mdm_hsic_pm_notify_event: unblock r
equest
<6>[ 9977.661356] [2: system_server: 4318] request_active_lock_set
<6>[ 9977.661515] [3: system_server: 4318] PM: suspend exit 2016-11-17 16:19:5
1.682401229 UTC
<6>[ 9977.666176] [0: wpa_supplicant: 5196] rtmsg : wlan0[1003]
<4>[ 9977.672386] [0:
kworker/0:2:31050] Emergency Sync complete
<6>[ 9977.672527] [0:
kworker/0:2:31050] exynos-dwc3 15400000.usb: dwc3_exyn
os_runtime_suspend
<6>[ 9977.672625] [0: thread_hotplug:18208] frequency info : 1296000, prev_cmd
1, exe_cmd 4
<6>[ 9977.672639] [0: thread_hotplug:18208] lcd is on : 0, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9977.672650] [0: thread_hotplug:18208] cluster1 cores hotplug out : 0
<6>[ 9977.680857] [0: kworker/u16:6:32449] mdm_hsic_rpm_check
<6>[ 9977.680883] [0: kworker/u16:6:32449] mdm_hsic_rpm_restart
<6>[ 9977.695541] [2: wpa_supplicant: 5196] [dhd] dhd_suspend_resume_helper
<6>[ 9977.695560] [2: wpa_supplicant: 5196] [dhd] dhd_set_suspend
<4>[ 9977.695572] [2: wpa_supplicant: 5196] dhd_set_suspend: force extra Suspen
d setting
<4>[ 9977.695592] [2: wpa_supplicant: 5196] dhd_prot_ioctl: SET PM to 1
<4>[ 9977.695970] [2: wpa_supplicant: 5196] dhd_enable_packet_filter: enter, va
lue = 1
<6>[ 9977.699289] [2: wpa_supplicant: 5196] [dhd] suspend bcn_li_dtim: 0
<6>[ 9977.707509] [1: wpa_supplicant: 5196] CFG80211-TRACE) wl_cfg80211_set_btc
oex_dhcp : DHCP is complete
<6>[ 9977.707528] [1: wpa_supplicant: 5196] CFG80211-TRACE) wl_cfg80211_set_btc
oex_dhcp : DHCP is complete , enable packet filter!!!
<4>[ 9977.707540] [1: wpa_supplicant: 5196] dhd_enable_packet_filter: enter, va
lue = 1
<6>[ 9977.764133] [1: wpa_supplicant: 5196] CFG80211-TRACE) __wl_cfg80211_scan
: START SCAN
<6>[ 9977.772129] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9977.772190] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[ 9977.772208] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[ 9977.772227] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9977.772401] [0: thread_hotplug:18208] frequency info : 1500000, prev_cmd
4, exe_cmd 0
<6>[ 9977.772413] [0: thread_hotplug:18208] lcd is on : 0, low power mode = 0,
dm_hotplug disable = 0

<6>[ 9977.772424] [0: thread_hotplug:18208] cluster1 cores hotplug out : 0


<6>[ 9977.772468] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<4>[ 9977.772845] [5:
swapper/5:
0] CPU5: Booted secondary processor
<4>[ 9977.777592] [6:
swapper/6:
0] CPU6: Booted secondary processor
<4>[ 9977.780221] [7:
swapper/7:
0] CPU7: Booted secondary processor
<6>[ 9977.930738] [1:wl_event_handle: 5324] CFG80211-TRACE) wl_escan_handler :
SCAN COMPLETED: scanned AP count=15
<6>[ 9977.941127] [3:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 10
00 00 01 21 00 27 00 2a 00 04 00 10 01 00
<6>[ 9977.942816] [0: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26fe0
<6>[ 9977.942843] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9977.942885] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9977.942900] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9977.942914] [2:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work was
cancelled
<6>[ 9977.943578] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<4>[ 9977.946349] [0: wpa_supplicant: 5196] dhd_wl_ioctl: WLC_IOCTL: cmd: 23, N
OT ASSOCIATED
<6>[ 9977.947218] [1:
mc_log: 3354] MobiCore mcd: 501|Err tima read_ra
nge_hash_and_cmp: TIMA_PKM_HASH_DB: Code segment modified start addr: 0x40286000
!!
<6>[ 9977.949134] [1:
mc_log: 3354] MobiCore mcd: 501|Err tima measure
_verify_kernel: TIMA_PKM_HASH_DB: KERNEL VERIFICATION FAILED
<6>[ 9977.949155] [1:
mc_log: 3354] MobiCore mcd: c01|TIMA_MEASURE_KERN
EL_ONDEMAND: ICCC : Kernel status ret:-1 ro_ret:0
<6>[ 9977.952256] [2:
mc_log: 3354] MobiCore mcd: c01|TIMA_MEASURE_KERN
EL_ONDEMAND: ICCC type:-16777216 value:1
<6>[ 9977.952277] [2:
mc_log: 3354] MobiCore mcd: c01|iccc: ICCC_save_d
ata@#
<6>[ 9977.955781] [1:
mc_log: 3354] MobiCore mcd: 501|drTima: processin
g TIMA_DRIVER_PHYS_MEM_ACCESS_COPY
<6>[ 9977.955801] [1:
mc_log: 3354] MobiCore mcd: 501|drTima: data_len
= 4 = 0x4
<6>[ 9977.955813] [1:
mc_log: 3354] MobiCore mcd: 501|drTima: PHYS_READ
<6>[ 9977.955825] [1:
mc_log: 3354] MobiCore mcd: c01|ICCC Magic Got is
= fffb , ret is = 0
<6>[ 9977.958739] [0: wpa_supplicant: 5196] CFG80211-INFO2) wl_cfg80211_connect
: Connectting withf4:dd:01 channel (11) ssid "GR_Guest", len (8)
<6>[ 9977.958739] [0: wpa_supplicant: 5196]
<6>[ 9977.959086] [1:
mc_log: 3354] MobiCore mcd: 501|drTima: processin
g TIMA_DRIVER_PHYS_MEM_ACCESS_COPY
<6>[ 9977.959106] [1:
mc_log: 3354] MobiCore mcd: 501|drTima: data_len
= 4 = 0x4
<6>[ 9977.959117] [1:
mc_log: 3354] MobiCore mcd: 501|drTima: PHYS_WRIT
E
<6>[ 9977.959131] [1:
mc_log: 3354] MobiCore mcd: 501|Err tima generat
e_response_string: TIMA_INIT: Kernel verification failure
<6>[ 9977.960124] [0:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 26
00 80 01 21 02 27 00 2a 00 1a 00 02 04 00
<6>[ 9977.960976] [0:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 11
00 00 01 21 00 28 00 2b 00 05 00 01 02 00
<6>[ 9977.962014] [1:
mc_log: 3354] MobiCore mcd: 501|Kernel verificati
on failure
<6>[ 9977.962035] [1:
mc_log: 3354] MobiCore mcd: c01|TL_MAIN_TIMA_PKM:
sendmsg->header.id = 0x00000003
<6>[ 9977.962047] [1:
mc_log: 3354] MobiCore mcd: c01|TL_MAIN_TIMA_PKM:

respmsg->header.id = 0x80000003
<6>[ 9977.962059] [1:
mc_log: 3354]
respmsg->header.status = 0x00000000
<6>[ 9977.962071] [1:
mc_log: 3354]
Returning = 0x00000000
<6>[ 9977.971647] [0:
qmuxd: 4756]
00 80 01 21 02 28 00 2b 00 c2 00 02 04 00
<6>[ 9977.972524] [0:
qmuxd: 3399]
00 00 01 21 00 29 00 2a 00 04 00 10 01 00
<6>[ 9977.984751] [1:
qmuxd: 4756]
00 80 01 21 02 29 00 2a 00 0e 00 02 04 00
<6>[ 9977.985376] [2:
qmuxd: 3399]
00 00 01 21 00 2a 00 2b 00 05 00 01 02 00
<6>[ 9977.999050] [1:
qmuxd: 4756]
01 80 01 21 02 2a 00 2b 00 0d 01 02 04 00
<6>[ 9978.000385] [2:
qmuxd: 3399]
00 00 01 01 00 31 00 b0 00 00 00
<6>[ 9978.012384] [3:
qmuxd: 4756]
00 80 01 01 02 31 00 b0 00 0e 00 02 04 00
<6>[ 9978.013051] [0:
qmuxd: 3399]
00 00 01 01 00 32 00 4d 00 04 00 01 01 00
<6>[ 9978.024060] [3:
qmuxd: 4756]
00 80 01 01 02 32 00 4d 00 07 00 02 04 00
<6>[ 9978.024705] [1:
qmuxd: 3399]
00 00 01 02 00 12 00 4d 00 04 00 01 01 00
<6>[ 9978.036182] [1:
qmuxd: 4756]
00 80 01 02 02 12 00 4d 00 07 00 02 04 00
<6>[ 9978.037929] [2:
qmuxd: 3399]
00 00 01 01 00 33 00 20 00 1d 00 31 01 00
<6>[ 9978.038279] [2:
qmuxd: 3399]
00 00 01 02 00 13 00 20 00 1d 00 31 01 00
<6>[ 9978.057390] [2:
qmuxd: 4756]
00 80 01 02 02 13 00 20 00 13 00 02 04 00
<6>[ 9978.057893] [2:
qmuxd: 4756]
00 80 01 21 04 37 00 01 00 10 00 28 04 00
<6>[ 9978.058776] [2:
qmuxd: 3399]
00 00 03 01 00 97 19 4d 00 00 00
<6>[ 9978.068396] [3:
qmuxd: 4756]
00 80 01 01 02 33 00 20 00 0e 00 02 04 00
<6>[ 9978.068827] [3:
qmuxd: 4756]
00 80 01 21 04 38 00 01 00 10 00 28 04 00
<6>[ 9978.069261] [3:
qmuxd: 4756]
00 80 01 01 04 7c 02 22 00 12 00 01 02 00
<6>[ 9978.069529] [3:
qmuxd: 4756]
00 80 01 01 04 7d 02 01 00 04 00 18 01 00
<6>[ 9978.070538] [3:
qmuxd: 4756]
00 80 03 01 02 97 19 4d 00 98 00 02 04 00
<6>[ 9978.072633] [2:
qmuxd: 3399]
00 00 03 01 00 98 19 4d 00 00 00
<6>[ 9978.083773] [3:
qmuxd: 4756]
00 80 03 01 02 98 19 4d 00 98 00 02 04 00
<6>[ 9978.085370] [2:
qmuxd: 3399]
00 00 01 01 00 34 00 2d 00 07 00 10 04 00
<6>[ 9978.098838] [3:
qmuxd: 4756]
00 80 01 01 02 34 00 2d 00 41 00 02 04 00
<6>[ 9978.099689] [3:
qmuxd: 3399]
00 00 01 01 00 35 00 01 00 04 00 13 01 00
<6>[ 9978.108795] [3:
qmuxd: 4756]
00 80 01 01 02 35 00 01 00 07 00 02 04 00
<6>[ 9978.120167] [3:
rild: 5533]

MobiCore mcd: c01|TL_MAIN_TIMA_PKM:


MobiCore mcd: c01|TL_MAIN_TIMA_PKM:
[mhi_uci_dump_log] uci_read: 01 ce
[mhi_uci_dump_log] uci_write: 01 10
[mhi_uci_dump_log] uci_read: 01 1a
[mhi_uci_dump_log] uci_write: 01 11
[mhi_uci_dump_log] uci_read: 01 19
[mhi_uci_dump_log] uci_write: 01 0c
[mhi_uci_dump_log] uci_read: 01 1a
[mhi_uci_dump_log] uci_write: 01 10
[mhi_uci_dump_log] uci_read: 01 13
[mhi_uci_dump_log] uci_write: 01 10
[mhi_uci_dump_log] uci_read: 01 13
[mhi_uci_dump_log] uci_write: 01 29
[mhi_uci_dump_log] uci_write: 01 29
[mhi_uci_dump_log] uci_read: 01 1f
[mhi_uci_dump_log] uci_read: 01 1c
[mhi_uci_dump_log] uci_write: 01 0c
[mhi_uci_dump_log] uci_read: 01 1a
[mhi_uci_dump_log] uci_read: 01 1c
[mhi_uci_dump_log] uci_read: 01 1e
[mhi_uci_dump_log] uci_read: 01 10
[mhi_uci_dump_log] uci_read: 01 a4
[mhi_uci_dump_log] uci_write: 01 0c
[mhi_uci_dump_log] uci_read: 01 a4
[mhi_uci_dump_log] uci_write: 01 13
[mhi_uci_dump_log] uci_read: 01 4d
[mhi_uci_dump_log] uci_write: 01 10
[mhi_uci_dump_log] uci_read: 01 13
rtmsg : rmnet_data0[1]

<3>[ 9978.123700] [1:DnsConfigServic: 9744] [RMNET:HI] rmnet_vnd_ioctl(): Unkow


n IOCTL 0x00008B01
<3>[ 9978.124201] [1:DnsConfigServic: 9744] [RMNET:HI] rmnet_vnd_ioctl(): Unkow
n IOCTL 0x00008B01
<3>[ 9978.124365] [1:DnsConfigServic: 6258] [RMNET:HI] rmnet_vnd_ioctl(): Unkow
n IOCTL 0x00008B01
<3>[ 9978.128314] [1:DnsConfigServic: 6258] [RMNET:HI] rmnet_vnd_ioctl(): Unkow
n IOCTL 0x00008B01
<6>[ 9978.151887] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<7>[ 9978.157077] [0:
kworker/0:0:13589] usb 1-2: usb auto-suspend, wakeup 1
<6>[ 9978.160129] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[ 9978.160158] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[ 9978.160177] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9978.160370] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[ 9978.161134] [1:
kworker/1:4:14113] MIF(1026000): unset TMU_COLD: 73750
0 => (set_volt: 700000, get_volt: 700000)
<6>[ 9978.161761] [1:
kworker/1:4:14113] DISP(100000): unset TMU_COLD: (set_
volt: 650000, get_volt: 650000)
<6>[ 9978.163089] [1:
kworker/1:4:14113] INT(100000): unset TMU_COLD: 687500
=> 650000
<6>[ 9978.163112] [1:
kworker/1:4:14113] tmu temperature state 1 to 0, cur_t
emp : 36
<7>[ 9978.170116] [0:
kworker/0:0:13589] hub 1-0:1.0: hub_suspend
<7>[ 9978.170152] [0:
kworker/0:0:13589] usb usb1: bus auto-suspend, wakeup
1
<7>[ 9978.170167] [0:
kworker/0:0:13589] s5p-ehci 15510000.usb: suspend root
hub
<3>[ 9978.171419] [0:
kworker/0:0:13589] s5p-ehci 15510000.usb: s5p_ehci_run
time_suspend
<7>[ 9978.182414] [0:
kworker/0:0:13589] samsung-usb2phy 15530000.usb2phy: s
amsung_usb2phy_runtime_suspend
<6>[ 9978.182452] [0:
kworker/0:0:13589] request_active_lock_release
<6>[ 9978.182464] [0:
kworker/0:0:13589] s5p_ehci_runtime_suspend: usage=0,
child=0
<6>[ 9978.382405] [0: thread_hotplug:18208] frequency info : 1000000, prev_cmd
0, exe_cmd 4
<6>[ 9978.382431] [0: thread_hotplug:18208] lcd is on : 0, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9978.382446] [0: thread_hotplug:18208] cluster1 cores hotplug out : 0
<6>[ 9978.434603] [3:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 99 19 43 00 00 00
<6>[ 9978.443319] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa260e0
<6>[ 9978.443348] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9978.443397] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9978.443416] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9978.443434] [2:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work was
cancelled
<6>[ 9978.444014] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9978.453517] [3:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 a9
00 80 03 01 02 99 19 43 00 9d 00 02 04 00
<6>[ 9978.552853] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0

<6>[ 9978.552902] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni


ng to 3
<6>[ 9978.552918] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[ 9978.552937] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9978.553129] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[ 9978.657385] [0:wl_event_handle: 5324] CFG80211-INFO2) wl_get_auth_assoc_s
tatus : event=3 status 0 reason 0
<6>[ 9978.668850] [0:wl_event_handle: 5324] CFG80211-INFO2) wl_get_auth_assoc_s
tatus : event=7 status 0 reason 0
<6>[ 9978.668878] [0:wl_event_handle: 5324] CFG80211-INFO2) wl_notify_connect_s
tatus : wl_bss_connect_done succeeded with f4:dd:01
<4>[ 9978.679257] [0:wl_event_handle: 5324] dhd_prot_ioctl: SET PM to 0
<4>[ 9978.684192] [0: kworker/u16:12:32531] regulatory is not upadted via queue
_regulatory_request.
<6>[ 9978.752098] [1:wl_event_handle: 5324] CFG80211-INFO2) wl_notify_connect_s
tatus : wl_bss_connect_done succeeded with f4:dd:01
<6>[ 9978.765430] [0:
argosd: 3378] argos_pm_qos_notify: name:UFS, spee
d:154Mbps, prev level:-1, request level:0
<6>[ 9978.767175] [0:
argosd: 3378] argos_freq_lock name:UFS, CPU_MIN=0
, CPU_MAX=0, KFC_MIN=1300000, KFC_MAX=0, MIF=1264000, INT=400000
<6>[ 9978.785758] [0: thread_hotplug:18208] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[ 9978.785777] [0: thread_hotplug:18208] lcd is on : 0, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9978.785789] [0: thread_hotplug:18208] cluster1 cores hotplug out : 0
<6>[ 9978.987396] [0: thread_hotplug:18208] frequency info : 1500000, prev_cmd
4, exe_cmd 0
<6>[ 9978.987414] [0: thread_hotplug:18208] lcd is on : 0, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9978.987424] [0: thread_hotplug:18208] cluster1 cores hotplug out : 0
<6>[ 9979.021149] [3:wl_event_handle: 5324] CFG80211-INFO2) wl_is_linkdown : Li
nk down Reason : WLC_E_DEAUTH_IND
<6>[ 9979.021178] [3:wl_event_handle: 5324] CFG80211-INFO2) wl_notify_connect_s
tatus : link down if wlan0 may call cfg80211_disconnected. event : 6, reason=2 f
rom f4:dd:01
<6>[ 9979.022886] [3:wl_event_handle: 5324] CFG80211-INFO2) wl_get_bss_info : w
pa_auth val 128
<6>[ 9979.022905] [3:wl_event_handle: 5324] CFG80211-INFO2) wl_get_bss_info : B
SSID:f4:dd:01 SSID GR_Guest
<6>[ 9979.022919] [3:wl_event_handle: 5324] CFG80211-INFO2) wl_get_bss_info : f
req:2462, BW:20, RSSI:-55 dBm, Rate:144 Mbps, 11mode:2, stream:1,MU-MIMO:0, Pass
point:0, SNR:0, Noise:-91,
<6>[ 9979.022919] [3:wl_event_handle: 5324] akm:0 roam:0
<4>[ 9979.022956] [3:wl_event_handle: 5324] dhd_prot_ioctl: SET PM to 2
<6>[ 9979.025581] [1:wl_event_handle: 5324] CFG80211-INFO2) wl_is_linkdown : Li
nk down Reason : WLC_E_LINK
<4>[ 9979.027392] [1:
kworker/1:4:14113] regulatory is not upadted via resto
re_regulatory_settings.
<6>[ 9979.027653] [1: wpa_supplicant: 5196] CFG80211-INFO2) wl_cfg80211_get_bss
_info : cmd: f4:0f:1b 2462 20 -55 144 2 1 0 0 0 -91 0 0
<6>[ 9979.086456] [0: thread_hotplug:18208] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[ 9979.086477] [0: thread_hotplug:18208] lcd is on : 0, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9979.086489] [0: thread_hotplug:18208] cluster1 cores hotplug out : 0
<6>[ 9979.130436] [0: wpa_supplicant: 5196] CFG80211-TRACE) __wl_cfg80211_scan
: START SCAN

<6>[ 9979.186221] [0: thread_hotplug:18208] frequency info : 1500000, prev_cmd


4, exe_cmd 0
<6>[ 9979.186239] [0: thread_hotplug:18208] lcd is on : 0, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9979.186249] [0: thread_hotplug:18208] cluster1 cores hotplug out : 0
<6>[ 9979.277857] [0:ConnectivitySer: 5171] binder: 3995:5171 transaction faile
d 29189, size 328-0
<6>[ 9979.286344] [0: thread_hotplug:18208] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[ 9979.286364] [0: thread_hotplug:18208] lcd is on : 0, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9979.286375] [0: thread_hotplug:18208] cluster1 cores hotplug out : 0
<6>[ 9979.295352] [0:wl_event_handle: 5324] CFG80211-TRACE) wl_escan_handler :
SCAN COMPLETED: scanned AP count=16
<4>[ 9979.309140] [3: wpa_supplicant: 5196] dhd_wl_ioctl: WLC_IOCTL: cmd: 23, N
OT ASSOCIATED
<6>[ 9979.318415] [3: wpa_supplicant: 5196] CFG80211-INFO2) wl_cfg80211_connect
: Connectting withf4:f5:f3 channel (1) ssid "GRI", len (3)
<6>[ 9979.318415] [3: wpa_supplicant: 5196]
<3>[ 9979.339846] I[0:
netd:18382] [rmnet_mhi0][t] - PKT skb->len=72 s
kb->head=ffffffc022ad6200 skb->data=ffffffc022ad621c
<3>[ 9979.339865] I[0:
netd:18382] [rmnet_mhi0][t] - PKT len: 72, prin
ting first 16 bytes
<6>[ 9979.339880] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26120
<3>[ 9979.339893] I[0:
netd:18382] [rmnet_mhi0][t] - PKT
<6>[ 9979.339900] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<3>[ 9979.339923] I[0:
netd:18382] [rmnet_mhi0][t] - PKT0000: 00 01 00
44 45 00 00 44 8e de 40 00 40 11 ca 4d
<6>[ 9979.339938] I[0:
netd:18382] [rmnet_mhi_xmit] [TX] len 86, type
0x1ada
<6>[ 9979.339954] I[0:
netd:18382] [TX] 00 01 00 44 45 00 00 44 8e de
40 00 40 11 ca 4d
<6>[ 9979.340159] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9979.340179] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9979.340194] [2:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work was
cancelled
<6>[ 9979.340661] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9979.350262] [3: MHI_EV_THREAD: 4604] [rmnet_mhi_tx_cb] [TX_CB] len 86, t
ype 0x1ada
<6>[ 9979.350284] [3: MHI_EV_THREAD: 4604] [TX_CB] 00 01 00 44 45 00 00 44 8e
de 40 00 40 11 ca 4d
<6>[ 9979.350311] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] Empty OOB
chan 100
<6>[ 9979.438053] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] Empty OOB
chan 100
<6>[ 9979.448887] [2: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9979.448929] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[ 9979.448943] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[ 9979.448961] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9979.449193] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[ 9979.542411] [2: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26140

<6>[ 9979.542437] [2: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re


ceived ring 0x0
<6>[ 9979.542815] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9979.542841] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9979.542856] [2:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work was
cancelled
<6>[ 9979.543318] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9979.546576] [3:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 10
00 80 01 01 04 7e 02 01 00 04 00 18 01 00
<6>[ 9979.572469] I[3:
kswapd0: 1027] [rmnet_mhi_poll] [RX] len 250, type
0x1ada
<6>[ 9979.572494] I[3:
kswapd0: 1027] [RX] 01 01 00 e8 45 00 00 e7 12 17
00 00 3d 11 89 72
<3>[ 9979.572572] I[0:
swapper/0:
0] [rmnet_mhi0][r] - PKT skb->len=236
skb->head=ffffffc013404000 skb->data=ffffffc013404040
<3>[ 9979.572586] I[0:
swapper/0:
0] [rmnet_mhi0][r] - PKT len: 236, pri
nting first 16 bytes
<3>[ 9979.572598] I[0:
swapper/0:
0] [rmnet_mhi0][r] - PKT
<3>[ 9979.572616] I[0:
swapper/0:
0] [rmnet_mhi0][r] - PKT0000: 01 01 00
e8 45 00 00 e7 12 17 00 00 3d 11 89 72
<6>[ 9979.587064] [2: MHI_EV_THREAD: 4604] [mhi_process_event_ring] Empty OOB
chan 100
<6>[ 9979.620339] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] Empty OOB
chan 100
<6>[ 9979.637878] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] Empty OOB
chan 100
<6>[ 9979.670159] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] Empty OOB
chan 100
<6>[ 9979.697495] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] Empty OOB
chan 100
<6>[ 9979.746245] [1: MHI_EV_THREAD: 4604] [mhi_process_event_ring] Empty OOB
chan 100
<6>[ 9979.772510] [1: MHI_EV_THREAD: 4604] [mhi_process_event_ring] Empty OOB
chan 100
<6>[ 9979.781296] [2: MHI_EV_THREAD: 4604] [mhi_process_event_ring] Empty OOB
chan 100
<3>[ 9979.807622] I[1:
netd:18434] [rmnet_mhi0][t] - PKT skb->len=72 s
kb->head=ffffffc059163600 skb->data=ffffffc05916361c
<3>[ 9979.807643] I[1:
netd:18434] [rmnet_mhi0][t] - PKT len: 72, prin
ting first 16 bytes
<3>[ 9979.807655] I[1:
netd:18434] [rmnet_mhi0][t] - PKT
<3>[ 9979.807673] I[1:
netd:18434] [rmnet_mhi0][t] - PKT0000: 02 01 00
44 45 00 00 42 8f 5e 40 00 40 11 c9 cf
<6>[ 9979.807688] I[1:
netd:18434] [rmnet_mhi_xmit] [TX] len 86, type
0x1ada
<6>[ 9979.807707] I[1:
netd:18434] [TX] 02 01 00 44 45 00 00 42 8f 5e
40 00 40 11 c9 cf
<6>[ 9979.814553] [2: MHI_EV_THREAD: 4604] [rmnet_mhi_tx_cb] [TX_CB] len 86, t
ype 0x1ada
<6>[ 9979.814577] [2: MHI_EV_THREAD: 4604] [TX_CB] 02 01 00 44 45 00 00 42 8f
5e 40 00 40 11 c9 cf
<6>[ 9979.814614] [2: MHI_EV_THREAD: 4604] [mhi_process_event_ring] Empty OOB
chan 100
<6>[ 9979.838301] I[3: Norm_Shared13: 8390] [rmnet_mhi_poll] [RX] len 254, type
0x1ada
<6>[ 9979.838326] I[3: Norm_Shared13: 8390] [RX] 03 01 00 ec 45 00 00 e9 4c cc
00 00 3d 11 4e bb
<3>[ 9979.838395] I[0: HeapTaskDaemon:18388] [rmnet_mhi0][r] - PKT skb->len=240
skb->head=ffffffc009ab3000 skb->data=ffffffc009ab3040

<3>[ 9979.838412] I[0: HeapTaskDaemon:18388] [rmnet_mhi0][r] - PKT len: 240, pri


nting first 16 bytes
<3>[ 9979.838424] I[0: HeapTaskDaemon:18388] [rmnet_mhi0][r] - PKT
<3>[ 9979.838442] I[0: HeapTaskDaemon:18388] [rmnet_mhi0][r] - PKT0000: 03 01 00
ec 45 00 00 e9 4c cc 00 00 3d 11 4e bb
<6>[ 9979.850660] [2: MHI_EV_THREAD: 4604] [mhi_process_event_ring] Empty OOB
chan 100
<6>[ 9979.873117] [2: MHI_EV_THREAD: 4604] [mhi_process_event_ring] Empty OOB
chan 100
<6>[ 9979.903504] [1: MHI_EV_THREAD: 4604] [mhi_process_event_ring] Empty OOB
chan 100
<6>[ 9979.925929] [2: MHI_EV_THREAD: 4604] [mhi_process_event_ring] Empty OOB
chan 100
<6>[ 9979.944485] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] Empty OOB
chan 100
<6>[ 9979.955159] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] Empty OOB
chan 100
<6>[ 9979.978673] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] Empty OOB
chan 100
<6>[ 9980.012015] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] Empty OOB
chan 100
<6>[ 9980.024034] [0:wl_event_handle: 5324] CFG80211-INFO2) wl_get_auth_assoc_s
tatus : event=3 status 0 reason 0
<6>[ 9980.029783] [0:wl_event_handle: 5324] CFG80211-INFO2) wl_get_auth_assoc_s
tatus : event=7 status 0 reason 0
<6>[ 9980.029814] [0:wl_event_handle: 5324] CFG80211-INFO2) wl_notify_connect_s
tatus : wl_bss_connect_done succeeded with f4:f5:f3
<4>[ 9980.033981] [0:wl_event_handle: 5324] dhd_prot_ioctl: SET PM to 0
<6>[ 9980.035046] [0:wl_event_handle: 5324] CFG80211-INFO2) wl_notify_connect_s
tatus : wl_bss_connect_done succeeded with f4:f5:f3
<4>[ 9980.035163] [3: kworker/u16:6:32449] regulatory is not upadted via queue
_regulatory_request.
<4>[ 9980.037013] I[0:
swapper/0:
0] ETHER_TYPE_802_1X [RX] : M1 of 4way
<4>[ 9980.046091] I[0: wpa_supplicant: 5196] ETHER_TYPE_802_1X [TX] : M2 of 4way
<4>[ 9980.046127] I[0: wpa_supplicant: 5196] setting flowring status to pending
from 2
<4>[ 9980.046161] I[0: wpa_supplicant: 5196] dhd_prot_flow_ring_create Send Flow
create Req msglen flow ID 41 for peer f4:f5:f3 prio 7 ifindex 0
<4>[ 9980.046452] I[0: wpa_supplicant: 5196] dhd_prot_process_flow_ring_create_r
esponse Flow create Response status = 0 Flow 41
<6>[ 9980.049978] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] Empty OOB
chan 100
<4>[ 9980.061363] I[0:
swapper/0:
0] ETHER_TYPE_802_1X [RX] : M3 of 4way
<4>[ 9980.064689] I[0: wpa_supplicant: 5196] ETHER_TYPE_802_1X [TX] : M4 of 4way
<6>[ 9980.069188] [2: wpa_supplicant: 5196] IPv6: ADDRCONF(NETDEV_CHANGE): wlan
0: link becomes ready
<6>[ 9980.069536] [2: wpa_supplicant: 5196] rtmsg : wlan0[1003]
<3>[ 9980.083767] [2:DnsConfigServic: 9744] [RMNET:HI] rmnet_vnd_ioctl(): Unkow
n IOCTL 0x00008B01
<3>[ 9980.084465] [2:DnsConfigServic: 6258] [RMNET:HI] rmnet_vnd_ioctl(): Unkow
n IOCTL 0x00008B01
<2>[ 9980.099922] [1:
netd: 4798] IPv6: ipv6_generate_eui64: dev type
: 1
<3>[ 9980.101678] [2:DnsConfigServic: 6258] [RMNET:HI] rmnet_vnd_ioctl(): Unkow
n IOCTL 0x00008B01
<3>[ 9980.102217] [2:DnsConfigServic: 9744] [RMNET:HI] rmnet_vnd_ioctl(): Unkow
n IOCTL 0x00008B01
<4>[ 9980.102515] I[1:
kworker/1:4:14113] setting flowring status to pending
from 2
<4>[ 9980.102558] I[1:
kworker/1:4:14113] dhd_prot_flow_ring_create Send Flow

create Req msglen flow ID 40 for peer 33:35:ba prio 0 ifindex 0


<4>[ 9980.102825] I[0:
Binder_2: 8544] dhd_prot_process_flow_ring_create_r
esponse Flow create Response status = 0 Flow 40
<6>[ 9980.125142] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] Empty OOB
chan 100
<6>[ 9980.141471] [3: wpa_supplicant: 5196] CFG80211-TRACE) wl_cfg80211_set_btc
oex_dhcp : DHCP session starts
<6>[ 9980.141496] [3: wpa_supplicant: 5196] CFG80211-TRACE) wl_cfg80211_set_btc
oex_dhcp : DHCP in progressing , disable packet filter!!!
<4>[ 9980.141508] [3: wpa_supplicant: 5196] dhd_enable_packet_filter: enter, va
lue = 0
<3>[ 9980.143003] I[1:
netd:18445] [rmnet_mhi0][t] - PKT skb->len=68 s
kb->head=ffffffc0692d1000 skb->data=ffffffc0692d101c
<3>[ 9980.143024] I[1:
netd:18445] [rmnet_mhi0][t] - PKT len: 68, prin
ting first 16 bytes
<3>[ 9980.143036] I[1:
netd:18445] [rmnet_mhi0][t] - PKT
<3>[ 9980.143054] I[1:
netd:18445] [rmnet_mhi0][t] - PKT0000: 02 01 00
40 45 00 00 3e 8f 6c 40 00 40 11 c9 c5
<6>[ 9980.143070] I[1:
netd:18445] [rmnet_mhi_xmit] [TX] len 82, type
0x1ada
<6>[ 9980.143090] I[1:
netd:18445] [TX] 02 01 00 40 45 00 00 3e 8f 6c
40 00 40 11 c9 c5
<6>[ 9980.149472] [0: MHI_EV_THREAD: 4604] [rmnet_mhi_tx_cb] [TX_CB] len 82, t
ype 0x1ada
<6>[ 9980.149497] [0: MHI_EV_THREAD: 4604] [TX_CB] 02 01 00 40 45 00 00 3e 8f
6c 40 00 40 11 c9 c5
<6>[ 9980.149530] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] Empty OOB
chan 100
<4>[ 9980.162501] I[0:om.sec.spp.push:18446] setting flowring status to pending
from 2
<4>[ 9980.162548] I[0:om.sec.spp.push:18446] dhd_prot_flow_ring_create Send Flow
create Req msglen flow ID 39 for peer 01:ff:fa prio 3 ifindex 0
<4>[ 9980.163103] I[0: kworker/0:2H:23569] dhd_prot_process_flow_ring_create_r
esponse Flow create Response status = 0 Flow 39
<6>[ 9980.171379] I[3:
swapper/3:
0] [rmnet_mhi_poll] [RX] len 126, type
0x1ada
<6>[ 9980.171402] I[3:
swapper/3:
0] [RX] 01 01 00 6c 45 00 00 6b 94 ff
00 00 3d 11 07 06
<3>[ 9980.171458] I[0:om.sec.spp.push:18446] [rmnet_mhi0][r] - PKT skb->len=112
skb->head=ffffffc00e683000 skb->data=ffffffc00e683040
<3>[ 9980.171471] I[0:om.sec.spp.push:18446] [rmnet_mhi0][r] - PKT len: 112, pri
nting first 16 bytes
<3>[ 9980.171482] I[0:om.sec.spp.push:18446] [rmnet_mhi0][r] - PKT
<3>[ 9980.171500] I[0:om.sec.spp.push:18446] [rmnet_mhi0][r] - PKT0000: 01 01 00
6c 45 00 00 6b 94 ff 00 00 3d 11 07 06
<6>[ 9980.179784] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] Empty OOB
chan 100
<6>[ 9980.193543] [1: MHI_EV_THREAD: 4604] [mhi_process_event_ring] Empty OOB
chan 100
<6>[ 9980.202246] [1: MHI_EV_THREAD: 4604] [mhi_process_event_ring] Empty OOB
chan 100
<6>[ 9980.232529] [1: MHI_EV_THREAD: 4604] [mhi_process_event_ring] Empty OOB
chan 100
<6>[ 9980.239959] [0: wpa_supplicant: 5196] [dhd] dhd_suspend_resume_helper
<6>[ 9980.239984] [0: wpa_supplicant: 5196] [dhd] dhd_set_suspend
<4>[ 9980.239996] [0: wpa_supplicant: 5196] dhd_set_suspend: Remove extra suspe
nd setting
<6>[ 9980.240013] [0: wpa_supplicant: 5196] [dhd] resume power_mode: 2
<4>[ 9980.240026] [0: wpa_supplicant: 5196] dhd_prot_ioctl: SET PM to 2
<4>[ 9980.240770] [0: wpa_supplicant: 5196] dhd_enable_packet_filter: enter, va

lue = 0
<6>[ 9980.245854] [0: wpa_supplicant: 5196] [dhd] resume bcn_li_dtim: 0
<4>[ 9980.249996] [1: wpa_supplicant: 5196] dhd_prot_ioctl: SET PM to 192
<4>[ 9980.251901] [1: wpa_supplicant: 5196] dhd_wl_ioctl: WLC_IOCTL: cmd: 86, r
et = -1
<6>[ 9980.251924] [1: wpa_supplicant: 5196] CFG80211-INFO2) wl_cfg80211_set_pow
er_mgmt : error (-1)
<6>[ 9980.282575] [1: MHI_EV_THREAD: 4604] [mhi_process_event_ring] Empty OOB
chan 100
<6>[ 9980.353681] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] Empty OOB
chan 100
<6>[ 9980.413261] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] Empty OOB
chan 100
<4>[ 9980.422613] I[0:
dhcpcd:18468] DHCP - DISCOVER [TX]
<4>[ 9980.446046] I[0:
swapper/0:
0] DHCP - OFFER [RX]
<4>[ 9980.446715] I[0:
dhcpcd:18468] DHCP - REQUEST [TX]
<6>[ 9980.459106] [1: MHI_EV_THREAD: 4604] [mhi_process_event_ring] Empty OOB
chan 100
<4>[ 9980.498262] I[0:
GCMReader:18476] DHCP - ACK [RX]
<3>[ 9980.523483] [0:DnsConfigServic: 9744] [RMNET:HI] rmnet_vnd_ioctl(): Unkow
n IOCTL 0x00008B01
<3>[ 9980.523891] [0:DnsConfigServic: 6258] [RMNET:HI] rmnet_vnd_ioctl(): Unkow
n IOCTL 0x00008B01
<6>[ 9980.656521] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] Empty OOB
chan 100
<4>[ 9980.707237] I[0:roid.themestore:18486] dhd_prot_flow_ring_delete sending F
LOW RING ID 39 for peer 01:ff:fa prio 3 ifindex 0 Delete req msglen 40
<4>[ 9980.707462] I[0:roid.themestore:18486] dhd_prot_flow_ring_delete sending F
LOW RING ID 40 for peer 33:35:ba prio 0 ifindex 0 Delete req msglen 40
<4>[ 9980.707485] I[0:roid.themestore:18486] dhd_prot_flow_ring_delete sending F
LOW RING ID 41 for peer f4:f5:f3 prio 7 ifindex 0 Delete req msglen 40
<6>[ 9980.707536] [1:wl_event_handle: 5324] CFG80211-INFO2) wl_is_linkdown : Li
nk down Reason : WLC_E_DEAUTH_IND
<6>[ 9980.707557] [1:wl_event_handle: 5324] CFG80211-INFO2) wl_notify_connect_s
tatus : link down if wlan0 may call cfg80211_disconnected. event : 6, reason=2 f
rom f4:f5:f3
<6>[ 9980.708205] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] Empty OOB
chan 100
<6>[ 9980.708795] [1:wl_event_handle: 5324] CFG80211-INFO2) wl_get_bss_info : w
pa_auth val 128
<6>[ 9980.708817] [1:wl_event_handle: 5324] CFG80211-INFO2) wl_get_bss_info : B
SSID:f4:f5:f3 SSID GRI
<6>[ 9980.708834] [1:wl_event_handle: 5324] CFG80211-INFO2) wl_get_bss_info : f
req:2412, BW:20, RSSI:-52 dBm, Rate:117 Mbps, 11mode:2, stream:1,MU-MIMO:0, Pass
point:0, SNR:0, Noise:-91,
<6>[ 9980.708834] [1:wl_event_handle: 5324] akm:0 roam:0
<4>[ 9980.708874] [1:wl_event_handle: 5324] dhd_prot_ioctl: SET PM to 2
<6>[ 9980.712358] [0:wl_event_handle: 5324] CFG80211-INFO2) wl_is_linkdown : Li
nk down Reason : WLC_E_LINK
<4>[ 9980.714305] [2:
kworker/2:2:13049] regulatory is not upadted via resto
re_regulatory_settings.
<6>[ 9980.714366] [0: wpa_supplicant: 5196] CFG80211-INFO2) wl_cfg80211_get_bss
_info : cmd: f4:0f:1b 2412 20 -52 117 2 1 0 0 0 -91 0 0
<6>[ 9980.715538] [0: wpa_supplicant: 5196] rtmsg : wlan0[1003]
<3>[ 9980.719608] [0:DnsConfigServic: 6258] [RMNET:HI] rmnet_vnd_ioctl(): Unkow
n IOCTL 0x00008B01
<3>[ 9980.719665] [2:DnsConfigServic: 9744] [RMNET:HI] rmnet_vnd_ioctl(): Unkow
n IOCTL 0x00008B01
<6>[ 9980.738562] [1: wpa_supplicant: 5196] [dhd] dhd_suspend_resume_helper
<6>[ 9980.738584] [1: wpa_supplicant: 5196] [dhd] dhd_set_suspend

<4>[ 9980.738596] [1: wpa_supplicant: 5196] dhd_set_suspend: force extra Suspen


d setting
<4>[ 9980.738615] [1: wpa_supplicant: 5196] dhd_prot_ioctl: SET PM to 1
<4>[ 9980.739230] [3: wpa_supplicant: 5196] dhd_enable_packet_filter: enter, va
lue = 1
<6>[ 9980.739252] [3: wpa_supplicant: 5196] [dhd] suspend bcn_li_dtim: 0
<6>[ 9980.744861] [0: wpa_supplicant: 5196] CFG80211-TRACE) wl_cfg80211_set_btc
oex_dhcp : DHCP is complete
<6>[ 9980.744884] [0: wpa_supplicant: 5196] CFG80211-TRACE) wl_cfg80211_set_btc
oex_dhcp : DHCP is complete , enable packet filter!!!
<4>[ 9980.744896] [0: wpa_supplicant: 5196] dhd_enable_packet_filter: enter, va
lue = 1
<3>[ 9980.767853] [0:DnsConfigServic: 6258] [RMNET:HI] rmnet_vnd_ioctl(): Unkow
n IOCTL 0x00008B01
<3>[ 9980.768178] [0:DnsConfigServic: 9744] [RMNET:HI] rmnet_vnd_ioctl(): Unkow
n IOCTL 0x00008B01
<3>[ 9980.770312] [0:DnsConfigServic: 9744] [RMNET:HI] rmnet_vnd_ioctl(): Unkow
n IOCTL 0x00008B01
<3>[ 9980.770804] [0:DnsConfigServic: 6258] [RMNET:HI] rmnet_vnd_ioctl(): Unkow
n IOCTL 0x00008B01
<6>[ 9980.816311] [1: wpa_supplicant: 5196] CFG80211-TRACE) __wl_cfg80211_scan
: START SCAN
<6>[ 9980.916536] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9980.916640] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[ 9980.916656] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[ 9980.916677] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9980.916871] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[ 9980.981166] [0:wl_event_handle: 5324] CFG80211-TRACE) wl_escan_handler :
SCAN COMPLETED: scanned AP count=20
<4>[ 9980.996091] [0: wpa_supplicant: 5196] dhd_wl_ioctl: WLC_IOCTL: cmd: 23, N
OT ASSOCIATED
<6>[ 9981.004792] [0: wpa_supplicant: 5196] CFG80211-INFO2) wl_cfg80211_connect
: Connectting withf4:dd:01 channel (11) ssid "GR_Guest", len (8)
<6>[ 9981.004792] [0: wpa_supplicant: 5196]
<6>[ 9981.507404] [0:wl_event_handle: 5324] CFG80211-INFO2) wl_is_linkdown : Li
nk down Reason : WLC_E_DEAUTH
<6>[ 9981.507430] [0:wl_event_handle: 5324] CFG80211-INFO2) wl_notify_connect_s
tatus : link down, during connecting
<6>[ 9981.507446] [0:wl_event_handle: 5324] CFG80211-INFO2) wl_is_linkdown : Li
nk down Reason : WLC_E_DEAUTH
<6>[ 9981.507460] [0:wl_event_handle: 5324] CFG80211-INFO2) wl_notify_connect_s
tatus : link down, during connecting
<3>[ 9981.589160] I[1:
netd:18631] [rmnet_mhi0][t] - PKT skb->len=68 s
kb->head=ffffffc0692d1c00 skb->data=ffffffc0692d1c1c
<3>[ 9981.589180] I[1:
netd:18631] [rmnet_mhi0][t] - PKT len: 68, prin
ting first 16 bytes
<3>[ 9981.589192] I[1:
netd:18631] [rmnet_mhi0][t] - PKT
<3>[ 9981.589211] I[1:
netd:18631] [rmnet_mhi0][t] - PKT0000: 03 01 00
40 45 00 00 3d 90 94 40 00 40 11 c8 9e
<6>[ 9981.589226] I[1:
netd:18631] [rmnet_mhi_xmit] [TX] len 82, type
0x1ada
<6>[ 9981.589245] I[1:
netd:18631] [TX] 03 01 00 40 45 00 00 3d 90 94
40 00 40 11 c8 9e
<6>[ 9981.595812] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26170

<6>[ 9981.595836] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re


ceived ring 0x0
<6>[ 9981.595872] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9981.595888] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9981.595904] [2:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work was
cancelled
<6>[ 9981.596703] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9981.606382] [3: MHI_EV_THREAD: 4604] [rmnet_mhi_tx_cb] [TX_CB] len 82, t
ype 0x1ada
<6>[ 9981.606406] [3: MHI_EV_THREAD: 4604] [TX_CB] 03 01 00 40 45 00 00 3d 90
94 40 00 40 11 c8 9e
<6>[ 9981.606443] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] Empty OOB
chan 100
<6>[ 9981.627040] [3:ConnectivitySer: 5171] binder: 3995:5171 transaction faile
d 29189, size 328-0
<6>[ 9981.627266] I[3:ConnectivitySer: 5171] [rmnet_mhi_poll] [RX] len 122, type
0x1ada
<6>[ 9981.627288] I[3:ConnectivitySer: 5171] [RX] 00 01 00 68 45 00 00 68 d3 f9
00 00 3d 11 c8 0e
<3>[ 9981.627343] I[0:
cat:18633] [rmnet_mhi0][r] - PKT skb->len=108
skb->head=ffffffc00a9bb000 skb->data=ffffffc00a9bb040
<3>[ 9981.627358] I[0:
cat:18633] [rmnet_mhi0][r] - PKT len: 108, pri
nting first 16 bytes
<3>[ 9981.627370] I[0:
cat:18633] [rmnet_mhi0][r] - PKT
<3>[ 9981.627388] I[0:
cat:18633] [rmnet_mhi0][r] - PKT0000: 00 01 00
68 45 00 00 68 d3 f9 00 00 3d 11 c8 0e
<6>[ 9981.638134] [1: MHI_EV_THREAD: 4604] [mhi_process_event_ring] Empty OOB
chan 100
<6>[ 9981.672254] [1: MHI_EV_THREAD: 4604] [mhi_process_event_ring] Empty OOB
chan 100
<6>[ 9981.675739] [1:
kworker/1:4:14113] gpu temperature state 1 to 0
<6>[ 9981.702094] [2:wl_event_handle: 5324] CFG80211-INFO2) wl_get_auth_assoc_s
tatus : event=3 status 0 reason 0
<6>[ 9981.703794] [2:wl_event_handle: 5324] CFG80211-INFO2) wl_get_auth_assoc_s
tatus : event=7 status 0 reason 0
<6>[ 9981.703823] [2:wl_event_handle: 5324] CFG80211-INFO2) wl_notify_connect_s
tatus : wl_bss_connect_done succeeded with f4:dd:01
<6>[ 9981.705298] [1: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9981.705357] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[ 9981.705374] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[ 9981.705393] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9981.705892] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[ 9981.706288] [1: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26190
<6>[ 9981.706311] [1: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9981.706342] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9981.706357] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9981.706371] [1:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work was
cancelled
<6>[ 9981.706937] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<4>[ 9981.708597] [0:wl_event_handle: 5324] dhd_prot_ioctl: SET PM to 0
<4>[ 9981.711025] [1: kworker/u16:6:32449] regulatory is not upadted via queue

_regulatory_request.
<6>[ 9981.724042] [1: MHI_EV_THREAD: 4604] [mhi_process_event_ring] Empty OOB
chan 100
<6>[ 9981.774931] [1: MHI_EV_THREAD: 4604] [mhi_process_event_ring] Empty OOB
chan 100
<6>[ 9981.781385] [0:wl_event_handle: 5324] CFG80211-INFO2) wl_notify_connect_s
tatus : wl_bss_connect_done succeeded with f4:dd:01
<6>[ 9981.812018] [1: MHI_EV_THREAD: 4604] [mhi_process_event_ring] Empty OOB
chan 100
<6>[ 9981.915383] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9981.915499] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[ 9981.915516] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[ 9981.915535] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9981.915763] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[ 9981.929416] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa261b0
<6>[ 9981.929442] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9981.929566] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9981.929583] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9981.929597] [1:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work was
cancelled
<6>[ 9981.930093] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9981.946571] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] Empty OOB
chan 100
<6>[ 9982.154790] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9982.154843] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[ 9982.154861] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[ 9982.154882] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9982.155075] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[ 9982.542363] [0:
kworker/0:1:25228] sync_system +
<6>[ 9982.542394] [0:
kworker/0:1:25228] sync_system <4>[ 9982.551031] [0:
kworker/0:0:13589] Emergency Sync complete
<6>[ 9982.858019] [0:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 9a 19 43 00 00 00
<6>[ 9982.864651] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa261d0
<6>[ 9982.864679] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9982.864785] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9982.864802] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9982.864818] [1:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work was
cancelled
<6>[ 9982.865447] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9982.874882] [2:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 b3
00 80 03 01 02 9a 19 43 00 a7 00 02 04 00
<6>[ 9982.973921] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0

<6>[ 9982.973981] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni


ng to 3
<6>[ 9982.974000] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[ 9982.974020] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9982.974214] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[ 9983.655858] [0:wl_event_handle: 5324] CFG80211-INFO2) wl_is_linkdown : Li
nk down Reason : WLC_E_DEAUTH_IND
<6>[ 9983.655891] [0:wl_event_handle: 5324] CFG80211-INFO2) wl_notify_connect_s
tatus : link down if wlan0 may call cfg80211_disconnected. event : 6, reason=3 f
rom f4:dd:01
<6>[ 9983.657620] [0:wl_event_handle: 5324] CFG80211-INFO2) wl_get_bss_info : w
pa_auth val 128
<6>[ 9983.657638] [0:wl_event_handle: 5324] CFG80211-INFO2) wl_get_bss_info : B
SSID:f4:dd:01 SSID GR_Guest
<6>[ 9983.657655] [0:wl_event_handle: 5324] CFG80211-INFO2) wl_get_bss_info : f
req:2462, BW:20, RSSI:-56 dBm, Rate:144 Mbps, 11mode:2, stream:1,MU-MIMO:0, Pass
point:0, SNR:0, Noise:-91,
<6>[ 9983.657655] [0:wl_event_handle: 5324] akm:0 roam:0
<4>[ 9983.657696] [0:wl_event_handle: 5324] dhd_prot_ioctl: SET PM to 2
<6>[ 9983.660218] [0:wl_event_handle: 5324] CFG80211-INFO2) wl_is_linkdown : Li
nk down Reason : WLC_E_LINK
<4>[ 9983.662378] [3:
kworker/3:8: 5088] regulatory is not upadted via resto
re_regulatory_settings.
<6>[ 9983.662845] [0: wpa_supplicant: 5196] CFG80211-INFO2) wl_cfg80211_get_bss
_info : cmd: f4:0f:1b 2462 20 -56 144 2 1 0 0 0 -91 0 0
<6>[ 9983.765046] [0: wpa_supplicant: 5196] CFG80211-TRACE) __wl_cfg80211_scan
: START SCAN
<6>[ 9983.931266] [0:wl_event_handle: 5324] CFG80211-TRACE) wl_escan_handler :
SCAN COMPLETED: scanned AP count=18
<4>[ 9983.948917] [0: wpa_supplicant: 5196] dhd_wl_ioctl: WLC_IOCTL: cmd: 23, N
OT ASSOCIATED
<6>[ 9983.955433] [0: wpa_supplicant: 5196] CFG80211-INFO2) wl_cfg80211_connect
: Connectting withf4:dd:03 channel (11) ssid "GRI", len (3)
<6>[ 9983.955433] [0: wpa_supplicant: 5196]
<6>[ 9983.979146] [2: kworker/u16:6:32449] [mhi_initiate_m3] Entered MHI state
4, Pending M0 0 Pending M3 0
<6>[ 9983.979173] [2: kworker/u16:6:32449] [mhi_initiate_m3] Triggering wake o
ut of M2
<6>[ 9983.986007] [1: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26210
<6>[ 9983.986035] [1: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9983.986387] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9983.986414] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9983.986429] [1:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9983.987086] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9983.987126] [1: kworker/u16:6:32449] [mhi_initiate_m3] Cancelled M1 time
r, timer was active
<6>[ 9983.987234] [1: kworker/u16:6:32449] [mhi_initiate_m3] Waiting for M3 co
mpletion.
<6>[ 9983.996196] [2: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9983.996260] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 5
<6>[ 9983.996277] [2:MHI_STATE_THREA: 4605] [process_M3_transition] Processing

M3 state transition
<6>[ 9983.996314] [2: kworker/u16:6:32449] [mhi_initiate_m3] M3 completion rec
eived
<6>[ 9983.996336] [2: kworker/u16:6:32449] [mhi_turn_off_pcie_link] Entered...
<6>[ 9984.009147] [3: kworker/u16:6:32449] mhi 0000:01:00.0: [debug] pmcsr reg
: b dev->current_state : 0
<6>[ 9984.009251] [3: kworker/u16:6:32449] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9984.009317] [3: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: ack mes
sage is ok
<6>[ 9984.009331] [3: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: receive
d Enter_L23_READY DLLP packet
<6>[ 9984.009350] [3: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[ 9984.009427] [3: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[ 9984.039399] [3: kworker/u16:6:32449] [mhi_turn_off_pcie_link] Exited...
<6>[ 9984.657318] [0:wl_event_handle: 5324] CFG80211-INFO2) wl_get_auth_assoc_s
tatus : event=3 status 0 reason 0
<6>[ 9984.658335] [0:wl_event_handle: 5324] CFG80211-INFO2) wl_get_auth_assoc_s
tatus : event=7 status 0 reason 0
<6>[ 9984.658357] [0:wl_event_handle: 5324] CFG80211-INFO2) wl_notify_connect_s
tatus : wl_bss_connect_done succeeded with f4:dd:03
<4>[ 9984.661908] [0:wl_event_handle: 5324] dhd_prot_ioctl: SET PM to 0
<4>[ 9984.663424] [1: kworker/u16:6:32449] regulatory is not upadted via queue
_regulatory_request.
<4>[ 9984.669278] I[0:
swapper/0:
0] ETHER_TYPE_802_1X [RX] : M1 of 4way
<6>[ 9984.670110] [1:wl_event_handle: 5324] CFG80211-INFO2) wl_is_linkdown : Li
nk down Reason : WLC_E_DEAUTH_IND
<6>[ 9984.670137] [1:wl_event_handle: 5324] CFG80211-INFO2) wl_notify_connect_s
tatus : link down if wlan0 may call cfg80211_disconnected. event : 6, reason=2 f
rom f4:dd:03
<6>[ 9984.672826] [1:wl_event_handle: 5324] CFG80211-INFO2) wl_get_bss_info : w
pa_auth val 128
<6>[ 9984.672853] [1:wl_event_handle: 5324] CFG80211-INFO2) wl_get_bss_info : B
SSID:f4:dd:03 SSID GRI
<6>[ 9984.672869] [1:wl_event_handle: 5324] CFG80211-INFO2) wl_get_bss_info : f
req:2462, BW:20, RSSI:-55 dBm, Rate:144 Mbps, 11mode:2, stream:1,MU-MIMO:0, Pass
point:0, SNR:0, Noise:-91,
<6>[ 9984.672869] [1:wl_event_handle: 5324] akm:0 roam:0
<4>[ 9984.672915] [1:wl_event_handle: 5324] dhd_prot_ioctl: SET PM to 2
<6>[ 9984.675636] [0:wl_event_handle: 5324] CFG80211-INFO2) wl_is_linkdown : Li
nk down Reason : WLC_E_LINK
<4>[ 9984.678094] [0:
kworker/0:0:13589] regulatory is not upadted via resto
re_regulatory_settings.
<6>[ 9984.678146] [1: wpa_supplicant: 5196] CFG80211-INFO2) wl_cfg80211_get_bss
_info : cmd: f4:0f:1b 2462 20 -55 144 2 1 0 0 0 -91 0 0
<6>[ 9984.780615] [3:
argosd: 3378] argos_pm_qos_notify: name:UFS, spee
d:3Mbps, prev level:0, request level:-1
<6>[ 9984.785294] [2: wpa_supplicant: 5196] CFG80211-TRACE) __wl_cfg80211_scan
: START SCAN
<6>[ 9984.787991] [0:
argosd: 3378] argos_freq_unlock name:UFS
<6>[ 9984.903475] [0: thread_hotplug:18208] frequency info : 400000, prev_cmd 4
, exe_cmd 1
<6>[ 9984.903537] [0: thread_hotplug:18208] lcd is on : 0, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9984.903575] [0: thread_hotplug:18208] cluster1 cores hotplug out : 0
<4>[ 9984.908630] [7:
migration/7: 43] migrate_irqs: 13 callbacks suppress
ed
<4>[ 9984.908650] [7:
migration/7: 43] IRQ155 no longer affine to CPU7

<5>[ 9984.910236] [0: thread_hotplug:18208] CPU7: shutdown


<4>[ 9984.915806] [6:
migration/6: 38] IRQ154 no longer affine to CPU6
<5>[ 9984.916496] [0: thread_hotplug:18208] CPU6: shutdown
<4>[ 9984.921670] [5:
migration/5: 33] IRQ153 no longer affine to CPU5
<5>[ 9984.922502] [0: thread_hotplug:18208] CPU5: shutdown
<4>[ 9984.927038] [4:
migration/4: 28] IRQ152 no longer affine to CPU4
<5>[ 9984.927675] [0: thread_hotplug:18208] CPU4: shutdown
<4>[ 9984.933349] [3:
migration/3: 23] IRQ151 no longer affine to CPU3
<4>[ 9984.933598] [3:
migration/3: 23] IRQ250 no longer affine to CPU3
<5>[ 9984.936076] [0: thread_hotplug:18208] CPU3: shutdown
<4>[ 9984.943996] [2:
migration/2: 18] IRQ150 no longer affine to CPU2
<4>[ 9984.944224] [2:
migration/2: 18] IRQ250 no longer affine to CPU2
<5>[ 9984.946611] [0: thread_hotplug:18208] CPU2: shutdown
<6>[ 9984.953287] [0:wl_event_handle: 5324] CFG80211-TRACE) wl_escan_handler :
SCAN COMPLETED: scanned AP count=16
<6>[ 9984.967736] [0: thread_hotplug:18208] MobiCore mcd: <- core_num=0x0000000
0, active_cpu=0x00000001
<6>[ 9984.969775] [1:
mc_fastcall: 1747] MobiCore mcd: CoreSwap ok 1 -> 0
<4>[ 9984.976733] [1:
migration/1: 13] IRQ149 no longer affine to CPU1
<4>[ 9984.976970] [1:
migration/1: 13] IRQ250 no longer affine to CPU1
<5>[ 9984.979583] [0: thread_hotplug:18208] CPU1: shutdown
<4>[ 9985.065940] [0: wpa_supplicant: 5196] dhd_wl_ioctl: WLC_IOCTL: cmd: 23, N
OT ASSOCIATED
<6>[ 9985.081557] [0: wpa_supplicant: 5196] CFG80211-INFO2) wl_cfg80211_connect
: Connectting withf4:f5:f1 channel (1) ssid "GR_Guest", len (8)
<6>[ 9985.081557] [0: wpa_supplicant: 5196]
<4>[ 9985.183375] [1:
swapper/1:
0] CPU1: Booted secondary processor
<6>[ 9985.192682] [0: thread_hotplug:18208] MobiCore mcd: <- core_num=0x0000000
1, active_cpu=0x00000000
<6>[ 9985.192877] [0:
mc_fastcall: 1747] MobiCore mcd: CoreSwap ok 0 -> 1
<4>[ 9985.193674] [2:
swapper/2:
0] CPU2: Booted secondary processor
<6>[ 9985.199511] [0: thread_hotplug:18208] frequency info : 400000, prev_cmd 1
, exe_cmd 5
<6>[ 9985.199558] [0: thread_hotplug:18208] lcd is on : 0, low power mode = 1,
dm_hotplug disable = 0
<6>[ 9985.199595] [0: thread_hotplug:18208] cluster1 cores hotplug out : 0
<6>[ 9985.399156] [0: thread_hotplug:18208] frequency info : 1104000, prev_cmd
5, exe_cmd 4
<6>[ 9985.399182] [0: thread_hotplug:18208] lcd is on : 0, low power mode = 1,
dm_hotplug disable = 0
<6>[ 9985.399196] [0: thread_hotplug:18208] cluster1 cores hotplug out : 0
<4>[ 9985.399539] [3:
swapper/3:
0] CPU3: Booted secondary processor
<6>[ 9985.699280] [0: thread_hotplug:18208] frequency info : 400000, prev_cmd 4
, exe_cmd 1
<6>[ 9985.699345] [0: thread_hotplug:18208] lcd is on : 0, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9985.699382] [0: thread_hotplug:18208] cluster1 cores hotplug out : 0
<5>[ 9985.705238] [0: thread_hotplug:18208] CPU3: shutdown
<6>[ 9985.785409] [1:wl_event_handle: 5324] CFG80211-INFO2) wl_get_auth_assoc_s
tatus : event=3 status 0 reason 0
<6>[ 9985.786329] [1:wl_event_handle: 5324] CFG80211-INFO2) wl_get_auth_assoc_s
tatus : event=7 status 0 reason 0
<6>[ 9985.786397] [1:wl_event_handle: 5324] CFG80211-INFO2) wl_notify_connect_s
tatus : wl_bss_connect_done succeeded with f4:f5:f1
<4>[ 9985.792744] [0:wl_event_handle: 5324] dhd_prot_ioctl: SET PM to 0
<4>[ 9985.794641] [2: kworker/u16:6:32449] regulatory is not upadted via queue
_regulatory_request.
<5>[ 9985.811299] [0: thread_hotplug:18208] CPU2: shutdown
<6>[ 9985.816149] [0: thread_hotplug:18208] MobiCore mcd: <- core_num=0x0000000
0, active_cpu=0x00000001

<6>[ 9985.816272] [1:


mc_fastcall: 1747] MobiCore mcd: CoreSwap ok 1 -> 0
<5>[ 9985.818628] [0: thread_hotplug:18208] CPU1: shutdown
<6>[ 9985.856313] [0:wl_event_handle: 5324] CFG80211-INFO2) wl_notify_connect_s
tatus : wl_bss_connect_done succeeded with f4:f5:f1
<6>[ 9986.052012] [0:wl_event_handle: 5324] CFG80211-INFO2) wl_is_linkdown : Li
nk down Reason : WLC_E_DEAUTH_IND
<6>[ 9986.052059] [0:wl_event_handle: 5324] CFG80211-INFO2) wl_notify_connect_s
tatus : link down if wlan0 may call cfg80211_disconnected. event : 6, reason=2 f
rom f4:f5:f1
<6>[ 9986.053887] [0:wl_event_handle: 5324] CFG80211-INFO2) wl_get_bss_info : w
pa_auth val 128
<6>[ 9986.053923] [0:wl_event_handle: 5324] CFG80211-INFO2) wl_get_bss_info : B
SSID:f4:f5:f1 SSID GR_Guest
<6>[ 9986.053947] [0:wl_event_handle: 5324] CFG80211-INFO2) wl_get_bss_info : f
req:2412, BW:20, RSSI:-51 dBm, Rate:144 Mbps, 11mode:2, stream:1,MU-MIMO:0, Pass
point:0, SNR:0, Noise:-91,
<6>[ 9986.053947] [0:wl_event_handle: 5324] akm:0 roam:0
<4>[ 9986.054006] [0:wl_event_handle: 5324] dhd_prot_ioctl: SET PM to 2
<6>[ 9986.061214] [0:wl_event_handle: 5324] CFG80211-INFO2) wl_is_linkdown : Li
nk down Reason : WLC_E_LINK
<4>[ 9986.063710] [0:
kworker/0:0:13589] regulatory is not upadted via resto
re_regulatory_settings.
<6>[ 9986.063803] [0: wpa_supplicant: 5196] CFG80211-INFO2) wl_cfg80211_get_bss
_info : cmd: f4:0f:1b 2412 20 -51 144 2 1 0 0 0 -91 0 0
<4>[ 9986.119631] [1:
swapper/1:
0] CPU1: Booted secondary processor
<6>[ 9986.122664] [0: thread_hotplug:18208] MobiCore mcd: <- core_num=0x0000000
1, active_cpu=0x00000000
<6>[ 9986.122776] [0:
mc_fastcall: 1747] MobiCore mcd: CoreSwap ok 0 -> 1
<4>[ 9986.123288] [2:
swapper/2:
0] CPU2: Booted secondary processor
<6>[ 9986.124379] [0: thread_hotplug:18208] frequency info : 1000000, prev_cmd
1, exe_cmd 4
<6>[ 9986.124398] [0: thread_hotplug:18208] lcd is on : 0, low power mode = 1,
dm_hotplug disable = 0
<6>[ 9986.124413] [0: thread_hotplug:18208] cluster1 cores hotplug out : 0
<4>[ 9986.124822] [3:
swapper/3:
0] CPU3: Booted secondary processor
<6>[ 9986.166097] [0: wpa_supplicant: 5196] CFG80211-TRACE) __wl_cfg80211_scan
: START SCAN
<6>[ 9986.225800] [0: thread_hotplug:18208] frequency info : 400000, prev_cmd 4
, exe_cmd 1
<6>[ 9986.225865] [0: thread_hotplug:18208] lcd is on : 0, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9986.225937] [0: thread_hotplug:18208] cluster1 cores hotplug out : 0
<5>[ 9986.231586] [0: thread_hotplug:18208] CPU3: shutdown
<5>[ 9986.240360] [0: thread_hotplug:18208] CPU2: shutdown
<6>[ 9986.243672] [0: thread_hotplug:18208] MobiCore mcd: <- core_num=0x0000000
0, active_cpu=0x00000001
<6>[ 9986.243960] [1:
mc_fastcall: 1747] MobiCore mcd: CoreSwap ok 1 -> 0
<5>[ 9986.249263] [0: thread_hotplug:18208] CPU1: shutdown
<6>[ 9986.331503] [0:wl_event_handle: 5324] CFG80211-TRACE) wl_escan_handler :
SCAN COMPLETED: scanned AP count=18
<4>[ 9986.383294] [0: wpa_supplicant: 5196] dhd_wl_ioctl: WLC_IOCTL: cmd: 23, N
OT ASSOCIATED
<6>[ 9986.392306] [0: wpa_supplicant: 5196] CFG80211-INFO2) wl_cfg80211_connect
: Connectting withf4:ed:51 channel (11) ssid "GR_Guest", len (8)
<6>[ 9986.392306] [0: wpa_supplicant: 5196]
<4>[ 9986.454427] [1:
swapper/1:
0] CPU1: Booted secondary processor
<6>[ 9986.464602] [0: thread_hotplug:18208] MobiCore mcd: <- core_num=0x0000000
1, active_cpu=0x00000000
<6>[ 9986.464712] [0:
mc_fastcall: 1747] MobiCore mcd: CoreSwap ok 0 -> 1
<4>[ 9986.465507] [2:
swapper/2:
0] CPU2: Booted secondary processor

<6>[ 9986.466666] [0: thread_hotplug:18208] frequency info : 1000000, prev_cmd


1, exe_cmd 4
<6>[ 9986.466683] [0: thread_hotplug:18208] lcd is on : 0, low power mode = 1,
dm_hotplug disable = 0
<6>[ 9986.466697] [0: thread_hotplug:18208] cluster1 cores hotplug out : 0
<4>[ 9986.467102] [3:
swapper/3:
0] CPU3: Booted secondary processor
<6>[ 9986.569130] [0: thread_hotplug:18208] frequency info : 900000, prev_cmd 4
, exe_cmd 1
<6>[ 9986.569161] [0: thread_hotplug:18208] lcd is on : 0, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9986.569178] [0: thread_hotplug:18208] cluster1 cores hotplug out : 0
<5>[ 9986.572438] [0: thread_hotplug:18208] CPU3: shutdown
<6>[ 9986.672587] [0: thread_hotplug:18208] frequency info : 400000, prev_cmd 1
, exe_cmd 5
<6>[ 9986.672651] [0: thread_hotplug:18208] lcd is on : 0, low power mode = 1,
dm_hotplug disable = 0
<6>[ 9986.672689] [0: thread_hotplug:18208] cluster1 cores hotplug out : 0
<5>[ 9986.778379] [0: thread_hotplug:18208] CPU2: shutdown
<6>[ 9986.781750] [0: thread_hotplug:18208] MobiCore mcd: <- core_num=0x0000000
0, active_cpu=0x00000001
<6>[ 9986.782050] [1:
mc_fastcall: 1747] MobiCore mcd: CoreSwap ok 1 -> 0
<5>[ 9986.786569] [0: thread_hotplug:18208] CPU1: shutdown
<6>[ 9986.789147] [0: thread_hotplug:18208] frequency info : 400000, prev_cmd 5
, exe_cmd 1
<6>[ 9986.789201] [0: thread_hotplug:18208] lcd is on : 0, low power mode = 1,
dm_hotplug disable = 0
<6>[ 9986.789238] [0: thread_hotplug:18208] cluster1 cores hotplug out : 0
<6>[ 9986.989265] [0: thread_hotplug:18208] frequency info : 1000000, prev_cmd
1, exe_cmd 4
<6>[ 9986.989295] [0: thread_hotplug:18208] lcd is on : 0, low power mode = 1,
dm_hotplug disable = 0
<6>[ 9986.989311] [0: thread_hotplug:18208] cluster1 cores hotplug out : 0
<4>[ 9986.989839] [1:
swapper/1:
0] CPU1: Booted secondary processor
<6>[ 9986.990853] [0: thread_hotplug:18208] MobiCore mcd: <- core_num=0x0000000
1, active_cpu=0x00000000
<6>[ 9986.990983] [0:
mc_fastcall: 1747] MobiCore mcd: CoreSwap ok 0 -> 1
<4>[ 9986.991490] [2:
swapper/2:
0] CPU2: Booted secondary processor
<4>[ 9986.992900] [3:
swapper/3:
0] CPU3: Booted secondary processor
<6>[ 9987.091397] [0:wl_event_handle: 5324] CFG80211-INFO2) wl_get_auth_assoc_s
tatus : event=3 status 5 reason 0
<6>[ 9987.093052] [0:wl_event_handle: 5324] CFG80211-INFO2) wl_get_auth_assoc_s
tatus : event=3 status 0 reason 0
<6>[ 9987.093164] [0: thread_hotplug:18208] frequency info : 400000, prev_cmd 4
, exe_cmd 1
<6>[ 9987.093207] [0: thread_hotplug:18208] lcd is on : 0, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9987.093244] [0: thread_hotplug:18208] cluster1 cores hotplug out : 0
<6>[ 9987.096110] [0:wl_event_handle: 5324] CFG80211-INFO2) wl_get_auth_assoc_s
tatus : event=7 status 0 reason 0
<6>[ 9987.096195] [0:wl_event_handle: 5324] CFG80211-INFO2) wl_notify_connect_s
tatus : wl_bss_connect_done succeeded with f4:ed:51
<5>[ 9987.101454] [0: thread_hotplug:18208] CPU3: shutdown
<4>[ 9987.105123] [1:wl_event_handle: 5324] dhd_prot_ioctl: SET PM to 0
<4>[ 9987.107508] I[0:
swapper/0:
0] ETHER_TYPE_802_1X [RX] : M1 of 4way
<5>[ 9987.111128] [0: thread_hotplug:18208] CPU2: shutdown
<6>[ 9987.111930] [1:wl_event_handle: 5324] CFG80211-INFO2) wl_notify_connect_s
tatus : wl_bss_connect_done succeeded with f4:ed:51
<4>[ 9987.112204] [1: kworker/u16:6:32449] regulatory is not upadted via queue
_regulatory_request.
<6>[ 9987.115110] [0: thread_hotplug:18208] MobiCore mcd: <- core_num=0x0000000

0, active_cpu=0x00000001
<6>[ 9987.118330] [1:
mc_fastcall: 1747] MobiCore mcd: CoreSwap ok 1 -> 0
<5>[ 9987.124709] [0: thread_hotplug:18208] CPU1: shutdown
<4>[ 9987.142420] I[0: wpa_supplicant: 5196] ETHER_TYPE_802_1X [TX] : M2 of 4way
<4>[ 9987.142481] I[0: wpa_supplicant: 5196] setting flowring status to pending
from 2
<4>[ 9987.142533] I[0: wpa_supplicant: 5196] dhd_prot_flow_ring_create Send Flow
create Req msglen flow ID 41 for peer f4:ed:51 prio 7 ifindex 0
<4>[ 9987.143237] I[0:
ksoftirqd/0:
3] dhd_prot_process_flow_ring_create_r
esponse Flow create Response status = 0 Flow 41
<4>[ 9987.195077] I[0:
swapper/0:
0] dhd_prot_flow_ring_delete sending F
LOW RING ID 41 for peer f4:ed:51 prio 7 ifindex 0 Delete req msglen 40
<6>[ 9987.196361] [0:wl_event_handle: 5324] CFG80211-INFO2) wl_is_linkdown : Li
nk down Reason : WLC_E_DEAUTH_IND
<6>[ 9987.196422] [0:wl_event_handle: 5324] CFG80211-INFO2) wl_notify_connect_s
tatus : link down if wlan0 may call cfg80211_disconnected. event : 6, reason=2 f
rom f4:ed:51
<6>[ 9987.201008] [0:wl_event_handle: 5324] CFG80211-INFO2) wl_get_bss_info : w
pa_auth val 128
<6>[ 9987.201085] [0:wl_event_handle: 5324] CFG80211-INFO2) wl_get_bss_info : B
SSID:f4:ed:51 SSID GR_Guest
<6>[ 9987.201138] [0:wl_event_handle: 5324] CFG80211-INFO2) wl_get_bss_info : f
req:2462, BW:20, RSSI:-69 dBm, Rate:144 Mbps, 11mode:2, stream:1,MU-MIMO:0, Pass
point:0, SNR:0, Noise:-91,
<6>[ 9987.201138] [0:wl_event_handle: 5324] akm:0 roam:0
<4>[ 9987.201273] [0:wl_event_handle: 5324] dhd_prot_ioctl: SET PM to 2
<6>[ 9987.209694] [0:wl_event_handle: 5324] CFG80211-INFO2) wl_is_linkdown : Li
nk down Reason : WLC_E_LINK
<4>[ 9987.210647] [0:
kworker/0:2:31050] regulatory is not upadted via resto
re_regulatory_settings.
<6>[ 9987.210798] [0: wpa_supplicant: 5196] CFG80211-INFO2) wl_cfg80211_get_bss
_info : cmd: f4:0f:1b 2462 20 -69 144 2 1 0 0 0 -91 0 0
<6>[ 9987.316797] [0: wpa_supplicant: 5196] CFG80211-TRACE) __wl_cfg80211_scan
: START SCAN
<6>[ 9987.521647] [0:wl_event_handle: 5324] CFG80211-TRACE) wl_escan_handler :
SCAN COMPLETED: scanned AP count=13
<6>[ 9987.527069] [0: thread_hotplug:18208] frequency info : 1000000, prev_cmd
1, exe_cmd 4
<6>[ 9987.527103] [0: thread_hotplug:18208] lcd is on : 0, low power mode = 1,
dm_hotplug disable = 0
<6>[ 9987.527118] [0: thread_hotplug:18208] cluster1 cores hotplug out : 0
<4>[ 9987.527624] [1:
swapper/1:
0] CPU1: Booted secondary processor
<6>[ 9987.534058] [0: thread_hotplug:18208] MobiCore mcd: <- core_num=0x0000000
1, active_cpu=0x00000000
<6>[ 9987.534168] [0:
mc_fastcall: 1747] MobiCore mcd: CoreSwap ok 0 -> 1
<4>[ 9987.536150] [2:
swapper/2:
0] CPU2: Booted secondary processor
<4>[ 9987.537630] [3:
swapper/3:
0] CPU3: Booted secondary processor
<6>[ 9987.545883] [0:
kworker/0:1:25228] sync_system +
<6>[ 9987.545935] [0:
kworker/0:1:25228] sync_system <4>[ 9987.553930] [2: wpa_supplicant: 5196] dhd_wl_ioctl: WLC_IOCTL: cmd: 23, N
OT ASSOCIATED
<6>[ 9987.560093] [3: wpa_supplicant: 5196] CFG80211-INFO2) wl_cfg80211_connect
: Connectting withae:a7:b6 channel (1) ssid "xfinitywifi", len (11)
<6>[ 9987.560093] [3: wpa_supplicant: 5196]
<4>[ 9987.564888] [0:
kworker/0:1:25228] Emergency Sync complete
<6>[ 9987.639238] [0: thread_hotplug:18208] frequency info : 900000, prev_cmd 4
, exe_cmd 1
<6>[ 9987.639269] [0: thread_hotplug:18208] lcd is on : 0, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9987.639286] [0: thread_hotplug:18208] cluster1 cores hotplug out : 0

<5>[ 9987.642755] [0: thread_hotplug:18208] CPU3: shutdown


<5>[ 9987.646808] [0: thread_hotplug:18208] CPU2: shutdown
<6>[ 9987.649318] [0: thread_hotplug:18208] MobiCore mcd: <- core_num=0x0000000
0, active_cpu=0x00000001
<6>[ 9987.649433] [1:
mc_fastcall: 1747] MobiCore mcd: CoreSwap ok 1 -> 0
<5>[ 9987.652122] [0: thread_hotplug:18208] CPU1: shutdown
<6>[ 9987.735339] [0:wl_event_handle: 5324] CFG80211-INFO2) wl_get_auth_assoc_s
tatus : event=3 status 0 reason 0
<4>[ 9987.753026] [1:
swapper/1:
0] CPU1: Booted secondary processor
<6>[ 9987.753962] [0: thread_hotplug:18208] MobiCore mcd: <- core_num=0x0000000
1, active_cpu=0x00000000
<6>[ 9987.754072] [0:
mc_fastcall: 1747] MobiCore mcd: CoreSwap ok 0 -> 1
<4>[ 9987.754710] [2:
swapper/2:
0] CPU2: Booted secondary processor
<6>[ 9987.755871] [0: thread_hotplug:18208] frequency info : 900000, prev_cmd 1
, exe_cmd 5
<6>[ 9987.755893] [0: thread_hotplug:18208] lcd is on : 0, low power mode = 1,
dm_hotplug disable = 0
<6>[ 9987.755910] [0: thread_hotplug:18208] cluster1 cores hotplug out : 0
<6>[ 9987.761072] [0:wl_event_handle: 5324] CFG80211-INFO2) wl_get_auth_assoc_s
tatus : event=7 status 0 reason 0
<6>[ 9987.761119] [0:wl_event_handle: 5324] CFG80211-INFO2) wl_notify_connect_s
tatus : wl_bss_connect_done succeeded with ae:a7:b6
<4>[ 9987.766861] [0:wl_event_handle: 5324] dhd_prot_ioctl: SET PM to 0
<4>[ 9987.768621] [2: kworker/u16:6:32449] regulatory is not upadted via queue
_regulatory_request.
<6>[ 9987.772976] [0: wpa_supplicant: 5196] IPv6: ADDRCONF(NETDEV_CHANGE): wlan
0: link becomes ready
<6>[ 9987.773408] [0: wpa_supplicant: 5196] rtmsg : wlan0[1003]
<3>[ 9987.778681] [1:DnsConfigServic: 9744] [RMNET:HI] rmnet_vnd_ioctl(): Unkow
n IOCTL 0x00008B01
<3>[ 9987.778719] [2:DnsConfigServic: 6258] [RMNET:HI] rmnet_vnd_ioctl(): Unkow
n IOCTL 0x00008B01
<2>[ 9987.797674] [1:
netd: 4798] IPv6: ipv6_generate_eui64: dev type
: 1
<3>[ 9987.801477] [1:DnsConfigServic: 9744] [RMNET:HI] rmnet_vnd_ioctl(): Unkow
n IOCTL 0x00008B01
<4>[ 9987.802576] I[1:DnsConfigServic: 6258] setting flowring status to pending
from 2
<4>[ 9987.802642] I[1:DnsConfigServic: 6258] dhd_prot_flow_ring_create Send Flow
create Req msglen flow ID 41 for peer 33:35:ba prio 0 ifindex 0
<4>[ 9987.802971] I[0:
watchdogd: 3022] dhd_prot_process_flow_ring_create_r
esponse Flow create Response status = 0 Flow 41
<3>[ 9987.806914] [1:DnsConfigServic: 6258] [RMNET:HI] rmnet_vnd_ioctl(): Unkow
n IOCTL 0x00008B01
<6>[ 9987.846772] [2: wpa_supplicant: 5196] CFG80211-TRACE) wl_cfg80211_set_btc
oex_dhcp : DHCP session starts
<6>[ 9987.846806] [2: wpa_supplicant: 5196] CFG80211-TRACE) wl_cfg80211_set_btc
oex_dhcp : DHCP in progressing , disable packet filter!!!
<4>[ 9987.846822] [2: wpa_supplicant: 5196] dhd_enable_packet_filter: enter, va
lue = 0
<6>[ 9987.855811] [0: thread_hotplug:18208] frequency info : 1104000, prev_cmd
5, exe_cmd 4
<6>[ 9987.855837] [0: thread_hotplug:18208] lcd is on : 0, low power mode = 1,
dm_hotplug disable = 0
<6>[ 9987.855851] [0: thread_hotplug:18208] cluster1 cores hotplug out : 0
<4>[ 9987.856250] [3:
swapper/3:
0] CPU3: Booted secondary processor
<6>[ 9987.933534] [3: wpa_supplicant: 5196] [dhd] dhd_suspend_resume_helper
<6>[ 9987.933566] [3: wpa_supplicant: 5196] [dhd] dhd_set_suspend
<4>[ 9987.933579] [3: wpa_supplicant: 5196] dhd_set_suspend: Remove extra suspe
nd setting

<6>[ 9987.933598] [3: wpa_supplicant: 5196] [dhd] resume power_mode: 2


<4>[ 9987.933614] [3: wpa_supplicant: 5196] dhd_prot_ioctl: SET PM to 2
<4>[ 9987.934631] [0: wpa_supplicant: 5196] dhd_enable_packet_filter: enter, va
lue = 0
<6>[ 9987.938570] [1: wpa_supplicant: 5196] [dhd] resume bcn_li_dtim: 0
<4>[ 9987.944929] [0: wpa_supplicant: 5196] dhd_prot_ioctl: SET PM to 192
<4>[ 9987.945794] [0: wpa_supplicant: 5196] dhd_wl_ioctl: WLC_IOCTL: cmd: 86, r
et = -1
<6>[ 9987.945841] [0: wpa_supplicant: 5196] CFG80211-INFO2) wl_cfg80211_set_pow
er_mgmt : error (-1)
<6>[ 9987.955857] [0: thread_hotplug:18208] frequency info : 500000, prev_cmd 4
, exe_cmd 1
<6>[ 9987.955907] [0: thread_hotplug:18208] lcd is on : 0, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9987.955938] [0: thread_hotplug:18208] cluster1 cores hotplug out : 0
<5>[ 9987.962683] [0: thread_hotplug:18208] CPU3: shutdown
<6>[ 9988.062538] [0: thread_hotplug:18208] frequency info : 1000000, prev_cmd
1, exe_cmd 4
<6>[ 9988.062568] [0: thread_hotplug:18208] lcd is on : 0, low power mode = 1,
dm_hotplug disable = 0
<6>[ 9988.062584] [0: thread_hotplug:18208] cluster1 cores hotplug out : 0
<4>[ 9988.063078] [3:
swapper/3:
0] CPU3: Booted secondary processor
<6>[ 9988.162883] [0: thread_hotplug:18208] frequency info : 900000, prev_cmd 4
, exe_cmd 1
<6>[ 9988.162953] [0: thread_hotplug:18208] lcd is on : 0, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9988.163050] [0: thread_hotplug:18208] cluster1 cores hotplug out : 0
<5>[ 9988.166704] [0: thread_hotplug:18208] CPU3: shutdown
<5>[ 9988.170513] [0: thread_hotplug:18208] CPU2: shutdown
<6>[ 9988.175966] [0: thread_hotplug:18208] MobiCore mcd: <- core_num=0x0000000
0, active_cpu=0x00000001
<6>[ 9988.176077] [1:
mc_fastcall: 1747] MobiCore mcd: CoreSwap ok 1 -> 0
<5>[ 9988.178483] [0: thread_hotplug:18208] CPU1: shutdown
<4>[ 9988.193408] I[0:
dhcpcd:18795] DHCP - DISCOVER [TX]
<6>[ 9988.312992] [0: kworker/u16:6:32449] vfsspi_work_func_debug ldo: 3, slee
p: 0, irq: 0, tz: 1, type: viper
<6>[ 9988.339215] [0: kworker/u16:6:32449] [SSP] debug_work_func: (36) - Senso
r state: 0x1fc3febf, RC: 1, CC: 0 DC: 0 TC: 0
<6>[ 9988.339285] [0: kworker/u16:6:32449] [SSP] 13 : 1(1ms)
<6>[ 9988.346648] [0:wl_event_handle: 5324] CFG80211-INFO2) wl_notify_connect_s
tatus : wl_bss_connect_done succeeded with ae:a7:b6
<6>[ 9988.631995] I[0:
cat:18806] exynos-pcie 10ee0000.pcie0: cp2ap_w
ake irq involked
<6>[ 9988.632112] [0:
kworker/0:1:25228] exynos-pcie 10ee0000.pcie0: PCIe: W
ake work for RC0
<6>[ 9988.632142] [0:
kworker/0:1:25228] exynos-pcie 10ee0000.pcie0: Callbac
k for the event : 4
<6>[ 9988.632162] [0:
kworker/0:1:25228] [mhi_link_state_cb] Received MSM_PC
IE_EVENT_WAKE
<6>[ 9988.632258] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 10
<6>[ 9988.632281] [0:MHI_STATE_THREA: 4605] [process_WAKE_transition] Entered
<6>[ 9988.632302] [0:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[ 9988.632431] [0:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, start of poweron, pcie state: 0
<6>[ 9988.673872] [0:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: D state
: 0, 59300
<6>[ 9988.679493] [0: thread_hotplug:18208] frequency info : 1000000, prev_cmd
1, exe_cmd 4
<6>[ 9988.679525] [0: thread_hotplug:18208] lcd is on : 0, low power mode = 1,

dm_hotplug disable = 0
<6>[ 9988.679541] [0: thread_hotplug:18208] cluster1 cores hotplug out : 0
<4>[ 9988.680056] [1:
swapper/1:
0] CPU1: Booted secondary processor
<6>[ 9988.684069] [0: thread_hotplug:18208] MobiCore mcd: <- core_num=0x0000000
1, active_cpu=0x00000000
<6>[ 9988.684200] [0:
mc_fastcall: 1747] MobiCore mcd: CoreSwap ok 0 -> 1
<4>[ 9988.684750] [2:
swapper/2:
0] CPU2: Booted secondary processor
<4>[ 9988.686332] [3:
swapper/3:
0] CPU3: Booted secondary processor
<6>[ 9988.688498] [0:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_reset: Link up : 0x03a62811
<6>[ 9988.688890] [0:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, end of poweron, pcie state: 3
<6>[ 9988.702726] [0:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] pmcsr reg
: 8 dev->current_state : 3
<6>[ 9988.702895] [0:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9988.702919] [0:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
y for the link of RC0
<6>[ 9988.702938] [0:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
config space of RC0 and its EP
<6>[ 9988.702955] [0:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
RC0
<6>[ 9988.703002] [0:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
EP of RC0
<6>[ 9988.703359] [0:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Refresh
ing the saved config space in PCI framework for RC0 and its EP
<6>[ 9988.708874] [0:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[ 9988.708910] [0:MHI_STATE_THREA: 4605] [process_WAKE_transition] MHI is in
itialized, transitioning to M0.
<6>[ 9988.708930] [0:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Entered MHI state
5, Pending M0 0 Pending M3 0
<6>[ 9988.708949] [0:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Waiting for M0 M1
or M3. Currently 5...
<6>[ 9988.708969] [0:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Wait complete sta
te: 5
<6>[ 9988.709062] [0:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[ 9988.709117] [0:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[ 9988.709136] [0:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Setting M0 ...
<6>[ 9988.709336] [0:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Exited...
<6>[ 9988.709353] [0:MHI_STATE_THREA: 4605] [process_WAKE_transition] Exited.
<6>[ 9988.711173] [2: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 5 link 1, ring type 2, index 0 db 0x5fa26230
<6>[ 9988.711213] [2: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9988.711378] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9988.711400] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9988.711420] [0:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9988.711991] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9988.715364] [0:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 10
00 80 01 01 04 7f 02 01 00 04 00 18 01 00
<3>[ 9988.812016] [1:DnsConfigServic: 6258] [RMNET:HI] rmnet_vnd_ioctl(): Unkow
n IOCTL 0x00008B01
<3>[ 9988.813987] [1:DnsConfigServic: 9744] [RMNET:HI] rmnet_vnd_ioctl(): Unkow
n IOCTL 0x00008B01
<6>[ 9988.924401] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9988.924461] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3

<6>[ 9988.924475] [0:MHI_STATE_THREA: 4605] [process_M1_transition] Processing


M1 state transition from state 3
<6>[ 9988.924493] [0:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9988.924685] [0:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[ 9989.085800] [0: thread_hotplug:18208] frequency info : 400000, prev_cmd 4
, exe_cmd 1
<6>[ 9989.085865] [0: thread_hotplug:18208] lcd is on : 0, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9989.085902] [0: thread_hotplug:18208] cluster1 cores hotplug out : 0
<5>[ 9989.091618] [0: thread_hotplug:18208] CPU3: shutdown
<5>[ 9989.197990] [0: thread_hotplug:18208] CPU2: shutdown
<6>[ 9989.201844] [0: thread_hotplug:18208] MobiCore mcd: <- core_num=0x0000000
0, active_cpu=0x00000001
<6>[ 9989.202145] [1:
mc_fastcall: 1747] MobiCore mcd: CoreSwap ok 1 -> 0
<5>[ 9989.206504] [0: thread_hotplug:18208] CPU1: shutdown
<6>[ 9989.925819] [0: kworker/u16:6:32449] [mhi_initiate_m3] Entered MHI state
4, Pending M0 0 Pending M3 0
<6>[ 9989.925903] [0: kworker/u16:6:32449] [mhi_initiate_m3] Triggering wake o
ut of M2
<6>[ 9989.936922] [0: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26260
<6>[ 9989.937002] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9989.937115] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9989.937161] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9989.937210] [0:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9989.942249] [0: kworker/u16:6:32449] [mhi_initiate_m3] Cancelled M1 time
r, timer was not active
<6>[ 9989.942544] [0: kworker/u16:6:32449] [mhi_initiate_m3] Waiting for M3 co
mpletion.
<6>[ 9989.942612] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9989.955269] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9989.955406] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 5
<6>[ 9989.955456] [0:MHI_STATE_THREA: 4605] [process_M3_transition] Processing
M3 state transition
<6>[ 9989.955547] [0: kworker/u16:6:32449] [mhi_initiate_m3] M3 completion rec
eived
<6>[ 9989.955615] [0: kworker/u16:6:32449] [mhi_turn_off_pcie_link] Entered...
<6>[ 9989.969280] [0: kworker/u16:6:32449] mhi 0000:01:00.0: [debug] pmcsr reg
: b dev->current_state : 0
<6>[ 9989.969471] [0: kworker/u16:6:32449] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9989.969589] [0: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: ack mes
sage is ok
<6>[ 9989.969636] [0: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: receive
d Enter_L23_READY DLLP packet
<6>[ 9989.969692] [0: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[ 9989.969873] [0: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[ 9990.001182] [0: kworker/u16:6:32449] [mhi_turn_off_pcie_link] Exited...
<4>[ 9991.681296] I[0:
dhcpcd:18795] DHCP - DISCOVER [TX]
<6>[ 9991.806143] [0: thread_hotplug:18208] frequency info : 1000000, prev_cmd
1, exe_cmd 4

<6>[ 9991.806176] [0: thread_hotplug:18208]


dm_hotplug disable = 0
<6>[ 9991.806191] [0: thread_hotplug:18208]
<4>[ 9991.806701] [1:
swapper/1:
0]
<6>[ 9991.811202] [0: thread_hotplug:18208]
1, active_cpu=0x00000000
<6>[ 9991.811385] [0:
mc_fastcall: 1747]
<4>[ 9991.816657] [2:
swapper/2:
0]
<4>[ 9991.819911] [3:
swapper/3:
0]
<6>[ 9991.922582] [0: thread_hotplug:18208]
, exe_cmd 1
<6>[ 9991.922647] [0: thread_hotplug:18208]
dm_hotplug disable = 0
<6>[ 9991.922685] [0: thread_hotplug:18208]
<4>[ 9991.926060] [3:
migration/3: 23]
ed
<4>[ 9991.926100] [3:
migration/3: 23]
<4>[ 9991.926323] [3:
migration/3: 23]
<5>[ 9991.928770] [0: thread_hotplug:18208]
<4>[ 9991.933492] [2:
migration/2: 18]
<4>[ 9991.933723] [2:
migration/2: 18]
<5>[ 9991.936156] [0: thread_hotplug:18208]
<6>[ 9991.938838] [0: thread_hotplug:18208]
0, active_cpu=0x00000001
<6>[ 9991.939094] [1:
mc_fastcall: 1747]
<4>[ 9991.941215] [1:
migration/1: 13]
<4>[ 9991.941450] [1:
migration/1: 13]
<5>[ 9991.943976] [0: thread_hotplug:18208]
<6>[ 9992.142591] [0: thread_hotplug:18208]
1, exe_cmd 4
<6>[ 9992.142620] [0: thread_hotplug:18208]
dm_hotplug disable = 0
<6>[ 9992.142634] [0: thread_hotplug:18208]
<4>[ 9992.143074] [1:
swapper/1:
0]
<6>[ 9992.144102] [0: thread_hotplug:18208]
1, active_cpu=0x00000000
<6>[ 9992.144196] [0:
mc_fastcall: 1747]
<4>[ 9992.144719] [2:
swapper/2:
0]
<4>[ 9992.146273] [3:
swapper/3:
0]
<6>[ 9992.545905] [0: thread_hotplug:18208]
, exe_cmd 1
<6>[ 9992.545969] [0: thread_hotplug:18208]
dm_hotplug disable = 0
<6>[ 9992.546007] [0: thread_hotplug:18208]
<4>[ 9992.549365] [3:
migration/3: 23]
<4>[ 9992.549582] [3:
migration/3: 23]
<5>[ 9992.551980] [0: thread_hotplug:18208]
<4>[ 9992.556863] [2:
migration/2: 18]
<4>[ 9992.557138] [2:
migration/2: 18]
<5>[ 9992.559549] [0: thread_hotplug:18208]
<6>[ 9992.562613] [0: thread_hotplug:18208]
0, active_cpu=0x00000001
<6>[ 9992.562928] [1:
mc_fastcall: 1747]
<5>[ 9992.567311] [0: thread_hotplug:18208]
<6>[ 9992.972525] [0: thread_hotplug:18208]
1, exe_cmd 4
<6>[ 9992.972558] [0: thread_hotplug:18208]
dm_hotplug disable = 0
<6>[ 9992.972574] [0: thread_hotplug:18208]
<4>[ 9992.973142] [1:
swapper/1:
0]

lcd is on : 0, low power mode = 1,


cluster1 cores hotplug out : 0
CPU1: Booted secondary processor
MobiCore mcd: <- core_num=0x0000000
MobiCore mcd: CoreSwap ok 0 -> 1
CPU2: Booted secondary processor
CPU3: Booted secondary processor
frequency info : 400000, prev_cmd 4
lcd is on : 0, low power mode = 0,
cluster1 cores hotplug out : 0
migrate_irqs: 44 callbacks suppress
IRQ151 no longer
IRQ250 no longer
CPU3: shutdown
IRQ150 no longer
IRQ250 no longer
CPU2: shutdown
MobiCore mcd: <-

affine to CPU3
affine to CPU3
affine to CPU2
affine to CPU2
core_num=0x0000000

MobiCore mcd: CoreSwap ok 1 -> 0


IRQ149 no longer affine to CPU1
IRQ250 no longer affine to CPU1
CPU1: shutdown
frequency info : 1104000, prev_cmd
lcd is on : 0, low power mode = 1,
cluster1 cores hotplug out : 0
CPU1: Booted secondary processor
MobiCore mcd: <- core_num=0x0000000
MobiCore mcd: CoreSwap ok 0 -> 1
CPU2: Booted secondary processor
CPU3: Booted secondary processor
frequency info : 400000, prev_cmd 4
lcd is on : 0, low power mode = 0,
cluster1 cores hotplug out : 0
IRQ151 no longer affine to CPU3
IRQ250 no longer affine to CPU3
CPU3: shutdown
IRQ150 no longer affine to CPU2
IRQ250 no longer affine to CPU2
CPU2: shutdown
MobiCore mcd: <- core_num=0x0000000
MobiCore mcd: CoreSwap ok 1 -> 0
CPU1: shutdown
frequency info : 1000000, prev_cmd
lcd is on : 0, low power mode = 1,
cluster1 cores hotplug out : 0
CPU1: Booted secondary processor

<6>[ 9992.976599] [0: thread_hotplug:18208] MobiCore mcd: <- core_num=0x0000000


1, active_cpu=0x00000000
<6>[ 9992.976711] [0:
mc_fastcall: 1747] MobiCore mcd: CoreSwap ok 0 -> 1
<6>[ 9992.979610] [0:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 9b 19 43 00 00 00
<6>[ 9992.979695] [0:
qmuxd: 3399] [mhi_wake_dev_from_m3] Initiating M
0 work...
<6>[ 9992.979777] [0: kworker/u16:6:32449] [m0_work] No pending resume, initia
ting M0.
<6>[ 9992.979798] [0: kworker/u16:6:32449] [mhi_initiate_m0] Entered MHI state
5, Pending M0 0 Pending M3 0
<6>[ 9992.979818] [0: kworker/u16:6:32449] [mhi_initiate_m0] Waiting for M0 M1
or M3. Currently 5...
<6>[ 9992.979838] [0: kworker/u16:6:32449] [mhi_initiate_m0] Wait complete sta
te: 5
<6>[ 9992.979856] [0: kworker/u16:6:32449] [mhi_turn_on_pcie_link] Entered...
<6>[ 9992.979884] [0: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, start of poweron, pcie state: 0
<4>[ 9992.980480] [2:
swapper/2:
0] CPU2: Booted secondary processor
<4>[ 9992.982514] [3:
swapper/3:
0] CPU3: Booted secondary processor
<6>[ 9993.019675] [0: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: D state
: 0, 712400
<6>[ 9993.039516] [3: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: exynos_
pcie_reset: Link up : 0x03a48b11
<6>[ 9993.039969] [3: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, end of poweron, pcie state: 3
<6>[ 9993.052919] [3: kworker/u16:6:32449] mhi 0000:01:00.0: [debug] pmcsr reg
: 8 dev->current_state : 3
<6>[ 9993.053244] [3: kworker/u16:6:32449] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9993.053286] [3: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: Recover
y for the link of RC0
<6>[ 9993.053317] [3: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: Recover
config space of RC0 and its EP
<6>[ 9993.053346] [3: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: Recover
RC0
<6>[ 9993.053409] [3: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: Recover
EP of RC0
<6>[ 9993.053885] [3: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: Refresh
ing the saved config space in PCI framework for RC0 and its EP
<6>[ 9993.059231] [3: kworker/u16:6:32449] [mhi_turn_on_pcie_link] Exited...
<6>[ 9993.059301] [3: kworker/u16:6:32449] [mhi_initiate_m0] Setting M0 ...
<6>[ 9993.059362] [3: kworker/u16:6:32449] [mhi_initiate_m0] Exited...
<6>[ 9993.062858] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 5 link 1, ring type 2, index 0 db 0x5fa26280
<6>[ 9993.062936] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9993.063180] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9993.063231] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9993.063278] [1:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9993.067571] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9993.075024] [2:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 b3
00 80 03 01 02 9b 19 43 00 a7 00 02 04 00
<6>[ 9993.082438] [0: thread_hotplug:18208] frequency info : 900000, prev_cmd 4
, exe_cmd 1
<6>[ 9993.082470] [0: thread_hotplug:18208] lcd is on : 0, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9993.082487] [0: thread_hotplug:18208] cluster1 cores hotplug out : 0

<5>[ 9993.086224] [0: thread_hotplug:18208] CPU3: shutdown


<5>[ 9993.090751] [0: thread_hotplug:18208] CPU2: shutdown
<6>[ 9993.102555] [0: thread_hotplug:18208] MobiCore mcd: <- core_num=0x0000000
0, active_cpu=0x00000001
<6>[ 9993.102667] [1:
mc_fastcall: 1747] MobiCore mcd: CoreSwap ok 1 -> 0
<5>[ 9993.105162] [0: thread_hotplug:18208] CPU1: shutdown
<6>[ 9993.284375] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9993.284446] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[ 9993.284469] [0:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[ 9993.284499] [0:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9993.284703] [0:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<4>[ 9993.306423] [1:
swapper/1:
0] CPU1: Booted secondary processor
<6>[ 9993.307827] [0: thread_hotplug:18208] MobiCore mcd: <- core_num=0x0000000
1, active_cpu=0x00000000
<6>[ 9993.307954] [0:
mc_fastcall: 1747] MobiCore mcd: CoreSwap ok 0 -> 1
<4>[ 9993.308587] [2:
swapper/2:
0] CPU2: Booted secondary processor
<6>[ 9993.309917] [0: thread_hotplug:18208] frequency info : 900000, prev_cmd 1
, exe_cmd 5
<6>[ 9993.309939] [0: thread_hotplug:18208] lcd is on : 0, low power mode = 1,
dm_hotplug disable = 0
<6>[ 9993.309956] [0: thread_hotplug:18208] cluster1 cores hotplug out : 0
<5>[ 9993.715196] [0: thread_hotplug:18208] CPU2: shutdown
<6>[ 9993.718989] [0: thread_hotplug:18208] MobiCore mcd: <- core_num=0x0000000
0, active_cpu=0x00000001
<6>[ 9993.719354] [1:
mc_fastcall: 1747] MobiCore mcd: CoreSwap ok 1 -> 0
<5>[ 9993.724381] [0: thread_hotplug:18208] CPU1: shutdown
<6>[ 9993.726379] [0: thread_hotplug:18208] frequency info : 400000, prev_cmd 5
, exe_cmd 1
<6>[ 9993.726433] [0: thread_hotplug:18208] lcd is on : 0, low power mode = 1,
dm_hotplug disable = 0
<6>[ 9993.726470] [0: thread_hotplug:18208] cluster1 cores hotplug out : 0
<6>[ 9994.286284] [0: kworker/u16:6:32449] [mhi_initiate_m3] Entered MHI state
4, Pending M0 0 Pending M3 0
<6>[ 9994.286371] [0: kworker/u16:6:32449] [mhi_initiate_m3] Triggering wake o
ut of M2
<6>[ 9994.288949] [0: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa262c0
<6>[ 9994.289141] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9994.289246] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9994.289293] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9994.289342] [0:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9994.293303] [0: kworker/u16:6:32449] [mhi_initiate_m3] Cancelled M1 time
r, timer was not active
<6>[ 9994.293543] [0: kworker/u16:6:32449] [mhi_initiate_m3] Waiting for M3 co
mpletion.
<6>[ 9994.293616] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9994.301839] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9994.301976] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 5
<6>[ 9994.302025] [0:MHI_STATE_THREA: 4605] [process_M3_transition] Processing
M3 state transition

<6>[ 9994.302117] [0: kworker/u16:6:32449] [mhi_initiate_m3] M3 completion rec


eived
<6>[ 9994.302186] [0: kworker/u16:6:32449] [mhi_turn_off_pcie_link] Entered...
<6>[ 9994.316142] [0: kworker/u16:6:32449] mhi 0000:01:00.0: [debug] pmcsr reg
: b dev->current_state : 0
<6>[ 9994.316345] [0: kworker/u16:6:32449] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9994.316462] [0: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: ack mes
sage is ok
<6>[ 9994.316509] [0: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: receive
d Enter_L23_READY DLLP packet
<6>[ 9994.316565] [0: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[ 9994.316748] [0: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[ 9994.348814] [0: kworker/u16:6:32449] [mhi_turn_off_pcie_link] Exited...
<6>[ 9994.725822] [0: thread_hotplug:18208] frequency info : 1000000, prev_cmd
1, exe_cmd 4
<6>[ 9994.725852] [0: thread_hotplug:18208] lcd is on : 0, low power mode = 1,
dm_hotplug disable = 0
<6>[ 9994.725868] [0: thread_hotplug:18208] cluster1 cores hotplug out : 0
<4>[ 9994.726434] [1:
swapper/1:
0] CPU1: Booted secondary processor
<6>[ 9994.727712] [0: thread_hotplug:18208] MobiCore mcd: <- core_num=0x0000000
1, active_cpu=0x00000000
<6>[ 9994.727830] [0:
mc_fastcall: 1747] MobiCore mcd: CoreSwap ok 0 -> 1
<4>[ 9994.728422] [2:
swapper/2:
0] CPU2: Booted secondary processor
<4>[ 9994.730565] [3:
swapper/3:
0] CPU3: Booted secondary processor
<6>[ 9994.929265] [0: thread_hotplug:18208] frequency info : 400000, prev_cmd 4
, exe_cmd 1
<6>[ 9994.929331] [0: thread_hotplug:18208] lcd is on : 0, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9994.929368] [0: thread_hotplug:18208] cluster1 cores hotplug out : 0
<5>[ 9994.935796] [0: thread_hotplug:18208] CPU3: shutdown
<5>[ 9994.943368] [0: thread_hotplug:18208] CPU2: shutdown
<6>[ 9994.946528] [0: thread_hotplug:18208] MobiCore mcd: <- core_num=0x0000000
0, active_cpu=0x00000001
<6>[ 9994.946836] [1:
mc_fastcall: 1747] MobiCore mcd: CoreSwap ok 1 -> 0
<5>[ 9994.951726] [0: thread_hotplug:18208] CPU1: shutdown
<6>[ 9995.552525] [0: thread_hotplug:18208] frequency info : 1000000, prev_cmd
1, exe_cmd 4
<6>[ 9995.552560] [0: thread_hotplug:18208] lcd is on : 0, low power mode = 1,
dm_hotplug disable = 0
<6>[ 9995.552575] [0: thread_hotplug:18208] cluster1 cores hotplug out : 0
<4>[ 9995.553266] [1:
swapper/1:
0] CPU1: Booted secondary processor
<6>[ 9995.554639] [0: thread_hotplug:18208] MobiCore mcd: <- core_num=0x0000000
1, active_cpu=0x00000000
<6>[ 9995.554740] [0:
mc_fastcall: 1747] MobiCore mcd: CoreSwap ok 0 -> 1
<4>[ 9995.555324] [2:
swapper/2:
0] CPU2: Booted secondary processor
<4>[ 9995.557248] [3:
swapper/3:
0] CPU3: Booted secondary processor
<6>[ 9995.855857] [0: thread_hotplug:18208] frequency info : 900000, prev_cmd 4
, exe_cmd 1
<6>[ 9995.855890] [0: thread_hotplug:18208] lcd is on : 0, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9995.855907] [0: thread_hotplug:18208] cluster1 cores hotplug out : 0
<5>[ 9995.859682] [0: thread_hotplug:18208] CPU3: shutdown
<5>[ 9995.864176] [0: thread_hotplug:18208] CPU2: shutdown
<6>[ 9995.869287] [0: thread_hotplug:18208] MobiCore mcd: <- core_num=0x0000000
0, active_cpu=0x00000001
<6>[ 9995.869395] [1:
mc_fastcall: 1747] MobiCore mcd: CoreSwap ok 1 -> 0
<5>[ 9995.871980] [0: thread_hotplug:18208] CPU1: shutdown

<6>[ 9996.272552] [0: thread_hotplug:18208] frequency info : 1000000, prev_cmd


1, exe_cmd 4
<6>[ 9996.272584] [0: thread_hotplug:18208] lcd is on : 0, low power mode = 1,
dm_hotplug disable = 0
<6>[ 9996.272600] [0: thread_hotplug:18208] cluster1 cores hotplug out : 0
<4>[ 9996.273179] [1:
swapper/1:
0] CPU1: Booted secondary processor
<6>[ 9996.274284] [0: thread_hotplug:18208] MobiCore mcd: <- core_num=0x0000000
1, active_cpu=0x00000000
<6>[ 9996.274385] [0:
mc_fastcall: 1747] MobiCore mcd: CoreSwap ok 0 -> 1
<4>[ 9996.277408] [2:
swapper/2:
0] CPU2: Booted secondary processor
<4>[ 9996.279990] [3:
swapper/3:
0] CPU3: Booted secondary processor
<6>[ 9996.379460] [0: thread_hotplug:18208] frequency info : 400000, prev_cmd 4
, exe_cmd 1
<6>[ 9996.379522] [0: thread_hotplug:18208] lcd is on : 0, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9996.379560] [0: thread_hotplug:18208] cluster1 cores hotplug out : 0
<5>[ 9996.385815] [0: thread_hotplug:18208] CPU3: shutdown
<5>[ 9996.393048] [0: thread_hotplug:18208] CPU2: shutdown
<6>[ 9996.396278] [0: thread_hotplug:18208] MobiCore mcd: <- core_num=0x0000000
0, active_cpu=0x00000001
<6>[ 9996.396467] [1:
mc_fastcall: 1747] MobiCore mcd: CoreSwap ok 1 -> 0
<5>[ 9996.401065] [0: thread_hotplug:18208] CPU1: shutdown
<4>[ 9996.702921] [1:
swapper/1:
0] CPU1: Booted secondary processor
<6>[ 9996.703954] [0: thread_hotplug:18208] MobiCore mcd: <- core_num=0x0000000
1, active_cpu=0x00000000
<6>[ 9996.704074] [0:
mc_fastcall: 1747] MobiCore mcd: CoreSwap ok 0 -> 1
<4>[ 9996.704598] [2:
swapper/2:
0] CPU2: Booted secondary processor
<6>[ 9996.705822] [0: thread_hotplug:18208] frequency info : 1104000, prev_cmd
1, exe_cmd 4
<6>[ 9996.705839] [0: thread_hotplug:18208] lcd is on : 0, low power mode = 1,
dm_hotplug disable = 0
<6>[ 9996.705853] [0: thread_hotplug:18208] cluster1 cores hotplug out : 0
<4>[ 9996.706352] [3:
swapper/3:
0] CPU3: Booted secondary processor
<6>[ 9996.805829] [0: thread_hotplug:18208] frequency info : 900000, prev_cmd 4
, exe_cmd 1
<6>[ 9996.805860] [0: thread_hotplug:18208] lcd is on : 0, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9996.805877] [0: thread_hotplug:18208] cluster1 cores hotplug out : 0
<5>[ 9996.809477] [0: thread_hotplug:18208] CPU3: shutdown
<3>[ 9996.826620] I[1:
netd:18934] [rmnet_mhi0][t] - PKT skb->len=72 s
kb->head=ffffffc02c5c1600 skb->data=ffffffc02c5c161c
<3>[ 9996.826652] I[1:
netd:18934] [rmnet_mhi0][t] - PKT len: 72, prin
ting first 16 bytes
<3>[ 9996.826669] I[1:
netd:18934] [rmnet_mhi0][t] - PKT
<3>[ 9996.826695] I[1:
netd:18934] [rmnet_mhi0][t] - PKT0000: 03 01 00
44 45 00 00 41 9d e5 40 00 40 11 bb 49
<6>[ 9996.826718] I[1:
netd:18934] [rmnet_mhi_xmit] [TX] len 86, type
0x1ada
<6>[ 9996.826747] I[1:
netd:18934] [TX] 03 01 00 44 45 00 00 41 9d e5
40 00 40 11 bb 49
<6>[ 9996.826795] I[1:
netd:18934] [mhi_wake_dev_from_m3] Initiating M
0 work...
<6>[ 9996.826867] [1: kworker/u16:12:32531] [m0_work] No pending resume, initia
ting M0.
<6>[ 9996.826891] [1: kworker/u16:12:32531] [mhi_initiate_m0] Entered MHI state
5, Pending M0 0 Pending M3 0
<6>[ 9996.826913] [1: kworker/u16:12:32531] [mhi_initiate_m0] Waiting for M0 M1
or M3. Currently 5...
<6>[ 9996.826933] [1: kworker/u16:12:32531] [mhi_initiate_m0] Wait complete sta
te: 5

<6>[ 9996.826954] [1: kworker/u16:12:32531] [mhi_turn_on_pcie_link] Entered...


<6>[ 9996.826982] [1: kworker/u16:12:32531] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, start of poweron, pcie state: 0
<6>[ 9996.866251] [1: kworker/u16:12:32531] exynos-pcie 10ee0000.pcie0: D state
: 0, 26a200
<6>[ 9996.887043] [2: kworker/u16:12:32531] exynos-pcie 10ee0000.pcie0: exynos_
pcie_reset: Link up : 0x03d12811
<6>[ 9996.887543] [2: kworker/u16:12:32531] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, end of poweron, pcie state: 3
<6>[ 9996.899398] [2: kworker/u16:12:32531] mhi 0000:01:00.0: [debug] pmcsr reg
: 8 dev->current_state : 3
<6>[ 9996.899564] [2: kworker/u16:12:32531] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9996.899592] [2: kworker/u16:12:32531] exynos-pcie 10ee0000.pcie0: Recover
y for the link of RC0
<6>[ 9996.899614] [2: kworker/u16:12:32531] exynos-pcie 10ee0000.pcie0: Recover
config space of RC0 and its EP
<6>[ 9996.899633] [2: kworker/u16:12:32531] exynos-pcie 10ee0000.pcie0: Recover
RC0
<6>[ 9996.899683] [2: kworker/u16:12:32531] exynos-pcie 10ee0000.pcie0: Recover
EP of RC0
<6>[ 9996.900031] [2: kworker/u16:12:32531] exynos-pcie 10ee0000.pcie0: Refresh
ing the saved config space in PCI framework for RC0 and its EP
<6>[ 9996.905547] [2: kworker/u16:12:32531] [mhi_turn_on_pcie_link] Exited...
<6>[ 9996.905588] [2: kworker/u16:12:32531] [mhi_initiate_m0] Setting M0 ...
<6>[ 9996.905777] [2: kworker/u16:12:32531] [mhi_initiate_m0] Exited...
<6>[ 9996.909537] [2: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 5 link 1, ring type 2, index 0 db 0x5fa262e0
<6>[ 9996.909603] [2: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9996.909706] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9996.910152] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9996.910438] [0: thread_hotplug:18208] frequency info : 500000, prev_cmd 1
, exe_cmd 5
<6>[ 9996.910995] [0:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9996.911179] [0: thread_hotplug:18208] lcd is on : 0, low power mode = 1,
dm_hotplug disable = 0
<6>[ 9996.911470] [0: thread_hotplug:18208] cluster1 cores hotplug out : 0
<6>[ 9996.913061] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9996.920038] [2: MHI_EV_THREAD: 4604] [rmnet_mhi_tx_cb] [TX_CB] len 86, t
ype 0x1ada
<6>[ 9996.920076] [2: MHI_EV_THREAD: 4604] [TX_CB] 03 01 00 44 45 00 00 41 9d
e5 40 00 40 11 bb 49
<6>[ 9996.920131] [2: MHI_EV_THREAD: 4604] [mhi_process_event_ring] Empty OOB
chan 100
<6>[ 9997.112660] [2:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 10
00 80 01 01 04 80 02 01 00 04 00 18 01 00
<4>[ 9997.117339] [2:
migration/2: 18] migrate_irqs: 32 callbacks suppress
ed
<4>[ 9997.117382] [2:
migration/2: 18] IRQ150 no longer affine to CPU2
<4>[ 9997.117582] [2:
migration/2: 18] IRQ250 no longer affine to CPU2
<5>[ 9997.120147] [0: thread_hotplug:18208] CPU2: shutdown
<6>[ 9997.130478] [0: thread_hotplug:18208] MobiCore mcd: <- core_num=0x0000000
0, active_cpu=0x00000001
<6>[ 9997.130731] [1:
mc_fastcall: 1747] MobiCore mcd: CoreSwap ok 1 -> 0
<4>[ 9997.133350] [1:
migration/1: 13] IRQ149 no longer affine to CPU1
<4>[ 9997.133569] [1:
migration/1: 13] IRQ250 no longer affine to CPU1
<5>[ 9997.136124] [0: thread_hotplug:18208] CPU1: shutdown

<6>[ 9997.138230] [0: thread_hotplug:18208] frequency info : 400000, prev_cmd 5


, exe_cmd 1
<6>[ 9997.138282] [0: thread_hotplug:18208] lcd is on : 0, low power mode = 1,
dm_hotplug disable = 0
<6>[ 9997.138320] [0: thread_hotplug:18208] cluster1 cores hotplug out : 0
<6>[ 9997.141418] I[0:DcHandlerThread: 5923] [rmnet_mhi_poll] [RX] len 126, type
0x1ada
<6>[ 9997.141498] I[0:DcHandlerThread: 5923] [RX] 03 01 00 6c 45 00 00 69 6c 9c
00 00 3d 11 2f 6b
<3>[ 9997.141648] I[0:DcHandlerThread: 5923] [rmnet_mhi0][r] - PKT skb->len=112
skb->head=ffffffc013390000 skb->data=ffffffc013390040
<3>[ 9997.141692] I[0:DcHandlerThread: 5923] [rmnet_mhi0][r] - PKT len: 112, pri
nting first 16 bytes
<3>[ 9997.141729] I[0:DcHandlerThread: 5923] [rmnet_mhi0][r] - PKT
<3>[ 9997.141788] I[0:DcHandlerThread: 5923] [rmnet_mhi0][r] - PKT0000: 03 01 00
6c 45 00 00 69 6c 9c 00 00 3d 11 2f 6b
<6>[ 9997.208125] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] Empty OOB
chan 100
<4>[ 9997.237189] [1:
swapper/1:
0] CPU1: Booted secondary processor
<6>[ 9997.241745] [0: thread_hotplug:18208] MobiCore mcd: <- core_num=0x0000000
1, active_cpu=0x00000000
<6>[ 9997.241922] [0:
mc_fastcall: 1747] MobiCore mcd: CoreSwap ok 0 -> 1
<4>[ 9997.243208] [2:
swapper/2:
0] CPU2: Booted secondary processor
<6>[ 9997.246030] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] Empty OOB
chan 100
<6>[ 9997.246270] [0: thread_hotplug:18208] frequency info : 400000, prev_cmd 1
, exe_cmd 5
<6>[ 9997.246314] [0: thread_hotplug:18208] lcd is on : 0, low power mode = 1,
dm_hotplug disable = 0
<6>[ 9997.246352] [0: thread_hotplug:18208] cluster1 cores hotplug out : 0
<4>[ 9997.348349] [2:
migration/2: 18] IRQ150 no longer affine to CPU2
<4>[ 9997.348543] [2:
migration/2: 18] IRQ250 no longer affine to CPU2
<5>[ 9997.350982] [0: thread_hotplug:18208] CPU2: shutdown
<6>[ 9997.354133] [0: thread_hotplug:18208] MobiCore mcd: <- core_num=0x0000000
0, active_cpu=0x00000001
<6>[ 9997.354288] [1:
mc_fastcall: 1747] MobiCore mcd: CoreSwap ok 1 -> 0
<4>[ 9997.355852] [1:
migration/1: 13] IRQ149 no longer affine to CPU1
<4>[ 9997.356058] [1:
migration/1: 13] IRQ250 no longer affine to CPU1
<5>[ 9997.359187] [0: thread_hotplug:18208] CPU1: shutdown
<6>[ 9997.360714] [0: thread_hotplug:18208] frequency info : 500000, prev_cmd 5
, exe_cmd 1
<6>[ 9997.360753] [0: thread_hotplug:18208] lcd is on : 0, low power mode = 1,
dm_hotplug disable = 0
<6>[ 9997.360784] [0: thread_hotplug:18208] cluster1 cores hotplug out : 0
<6>[ 9997.454158] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9997.454223] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[ 9997.454245] [0:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[ 9997.454273] [0:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9997.454475] [0:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[ 9997.459204] [0: thread_hotplug:18208] frequency info : 1000000, prev_cmd
1, exe_cmd 4
<6>[ 9997.459237] [0: thread_hotplug:18208] lcd is on : 0, low power mode = 1,
dm_hotplug disable = 0
<6>[ 9997.459253] [0: thread_hotplug:18208] cluster1 cores hotplug out : 0
<4>[ 9997.459826] [1:
swapper/1:
0] CPU1: Booted secondary processor

<6>[ 9997.462596] [0: thread_hotplug:18208] MobiCore mcd: <- core_num=0x0000000


1, active_cpu=0x00000000
<6>[ 9997.462708] [0:
mc_fastcall: 1747] MobiCore mcd: CoreSwap ok 0 -> 1
<4>[ 9997.463358] [2:
swapper/2:
0] CPU2: Booted secondary processor
<4>[ 9997.465036] [3:
swapper/3:
0] CPU3: Booted secondary processor
<6>[ 9997.635284] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26310
<6>[ 9997.635317] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9997.635448] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9997.635467] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9997.635485] [0:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work was
cancelled
<6>[ 9997.636286] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9997.645432] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] Empty OOB
chan 100
<6>[ 9997.665796] [0: thread_hotplug:18208] frequency info : 500000, prev_cmd 4
, exe_cmd 1
<6>[ 9997.665839] [0: thread_hotplug:18208] lcd is on : 0, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9997.665870] [0: thread_hotplug:18208] cluster1 cores hotplug out : 0
<4>[ 9997.668994] [3:
migration/3: 23] IRQ151 no longer affine to CPU3
<4>[ 9997.669184] [3:
migration/3: 23] IRQ250 no longer affine to CPU3
<5>[ 9997.671502] [0: thread_hotplug:18208] CPU3: shutdown
<5>[ 9997.679257] [0: thread_hotplug:18208] CPU2: shutdown
<6>[ 9997.681907] [0: thread_hotplug:18208] MobiCore mcd: <- core_num=0x0000000
0, active_cpu=0x00000001
<6>[ 9997.682604] [1:
mc_fastcall: 1747] MobiCore mcd: CoreSwap ok 1 -> 0
<5>[ 9997.687304] [0: thread_hotplug:18208] CPU1: shutdown
<6>[ 9997.708068] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] Empty OOB
chan 100
<6>[ 9997.744849] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9997.744915] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[ 9997.744938] [0:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[ 9997.744969] [0:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9997.745173] [0:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[ 9997.789049] [0: thread_hotplug:18208] frequency info : 1000000, prev_cmd
1, exe_cmd 4
<6>[ 9997.789166] [0: thread_hotplug:18208] lcd is on : 0, low power mode = 1,
dm_hotplug disable = 0
<6>[ 9997.789184] [0: thread_hotplug:18208] cluster1 cores hotplug out : 0
<4>[ 9997.789894] [1:
swapper/1:
0] CPU1: Booted secondary processor
<6>[ 9997.791057] [0: thread_hotplug:18208] MobiCore mcd: <- core_num=0x0000000
1, active_cpu=0x00000000
<6>[ 9997.791191] [0:
mc_fastcall: 1747] MobiCore mcd: CoreSwap ok 0 -> 1
<4>[ 9997.791861] [2:
swapper/2:
0] CPU2: Booted secondary processor
<4>[ 9997.793864] [3:
swapper/3:
0] CPU3: Booted secondary processor
<6>[ 9997.868319] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26330
<6>[ 9997.868351] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9997.868532] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9997.868553] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Entered

<6>[ 9997.868572] [0:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work was


cancelled
<6>[ 9997.869449] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9997.877747] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] Empty OOB
chan 100
<6>[ 9997.895932] [0: thread_hotplug:18208] frequency info : 400000, prev_cmd 4
, exe_cmd 1
<6>[ 9997.895991] [0: thread_hotplug:18208] lcd is on : 0, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9997.896028] [0: thread_hotplug:18208] cluster1 cores hotplug out : 0
<5>[ 9997.901895] [0: thread_hotplug:18208] CPU3: shutdown
<5>[ 9997.908702] [0: thread_hotplug:18208] CPU2: shutdown
<6>[ 9997.912174] [0: thread_hotplug:18208] MobiCore mcd: <- core_num=0x0000000
0, active_cpu=0x00000001
<6>[ 9997.912654] [1:
mc_fastcall: 1747] MobiCore mcd: CoreSwap ok 1 -> 0
<5>[ 9997.919185] [0: thread_hotplug:18208] CPU1: shutdown
<6>[ 9997.920773] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] Empty OOB
chan 100
<6>[ 9997.981914] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9997.983105] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[ 9997.983591] [0:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[ 9997.983625] [0:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9997.983829] [0:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[ 9998.005631] [0: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26350
<6>[ 9998.005757] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9998.005827] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9998.005849] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9998.005870] [0:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work was
cancelled
<6>[ 9998.006511] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9998.015450] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] Empty OOB
chan 100
<6>[ 9998.115007] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9998.115058] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[ 9998.115077] [0:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[ 9998.115104] [0:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[ 9998.115302] [0:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<4>[ 9998.119671] [1:
swapper/1:
0] CPU1: Booted secondary processor
<6>[ 9998.120784] [0: thread_hotplug:18208] MobiCore mcd: <- core_num=0x0000000
1, active_cpu=0x00000000
<6>[ 9998.120878] [0:
mc_fastcall: 1747] MobiCore mcd: CoreSwap ok 0 -> 1
<4>[ 9998.121431] [2:
swapper/2:
0] CPU2: Booted secondary processor
<6>[ 9998.122571] [0: thread_hotplug:18208] frequency info : 1104000, prev_cmd
1, exe_cmd 4
<6>[ 9998.122587] [0: thread_hotplug:18208] lcd is on : 0, low power mode = 1,
dm_hotplug disable = 0
<6>[ 9998.122601] [0: thread_hotplug:18208] cluster1 cores hotplug out : 0

<4>[ 9998.123070] [3:


swapper/3:
0] CPU3: Booted secondary processor
<6>[ 9998.222562] [0: thread_hotplug:18208] frequency info : 400000, prev_cmd 4
, exe_cmd 1
<6>[ 9998.222628] [0: thread_hotplug:18208] lcd is on : 0, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9998.222666] [0: thread_hotplug:18208] cluster1 cores hotplug out : 0
<5>[ 9998.228736] [0: thread_hotplug:18208] CPU3: shutdown
<5>[ 9998.236716] [0: thread_hotplug:18208] CPU2: shutdown
<6>[ 9998.239639] [0: thread_hotplug:18208] MobiCore mcd: <- core_num=0x0000000
0, active_cpu=0x00000001
<6>[ 9998.239974] [1:
mc_fastcall: 1747] MobiCore mcd: CoreSwap ok 1 -> 0
<5>[ 9998.244948] [0: thread_hotplug:18208] CPU1: shutdown
<6>[ 9998.945825] [0: thread_hotplug:18208] frequency info : 1000000, prev_cmd
1, exe_cmd 4
<6>[ 9998.945858] [0: thread_hotplug:18208] lcd is on : 0, low power mode = 1,
dm_hotplug disable = 0
<6>[ 9998.945874] [0: thread_hotplug:18208] cluster1 cores hotplug out : 0
<4>[ 9998.946468] [1:
swapper/1:
0] CPU1: Booted secondary processor
<6>[ 9998.947646] [0: thread_hotplug:18208] MobiCore mcd: <- core_num=0x0000000
1, active_cpu=0x00000000
<6>[ 9998.947752] [0:
mc_fastcall: 1747] MobiCore mcd: CoreSwap ok 0 -> 1
<4>[ 9998.949424] [2:
swapper/2:
0] CPU2: Booted secondary processor
<4>[ 9998.951286] [3:
swapper/3:
0] CPU3: Booted secondary processor
<4>[ 9999.026814] I[1:
dhcpcd:18795] DHCP - DISCOVER [TX]
<6>[ 9999.052524] [0: thread_hotplug:18208] frequency info : 900000, prev_cmd 4
, exe_cmd 1
<6>[ 9999.052557] [0: thread_hotplug:18208] lcd is on : 0, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9999.052575] [0: thread_hotplug:18208] cluster1 cores hotplug out : 0
<5>[ 9999.055971] [0: thread_hotplug:18208] CPU3: shutdown
<5>[ 9999.060095] [0: thread_hotplug:18208] CPU2: shutdown
<6>[ 9999.061825] [0: thread_hotplug:18208] MobiCore mcd: <- core_num=0x0000000
0, active_cpu=0x00000001
<6>[ 9999.061949] [1:
mc_fastcall: 1747] MobiCore mcd: CoreSwap ok 1 -> 0
<5>[ 9999.064490] [0: thread_hotplug:18208] CPU1: shutdown
<6>[ 9999.115878] [0: kworker/u16:12:32531] [mhi_initiate_m3] Entered MHI state
4, Pending M0 0 Pending M3 0
<6>[ 9999.115918] [0: kworker/u16:12:32531] [mhi_initiate_m3] Triggering wake o
ut of M2
<6>[ 9999.122625] [0: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26370
<6>[ 9999.122664] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9999.122708] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[ 9999.122727] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[ 9999.122748] [0:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[ 9999.123354] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[ 9999.123387] [0: kworker/u16:12:32531] [mhi_initiate_m3] Cancelled M1 time
r, timer was active
<6>[ 9999.123518] [0: kworker/u16:12:32531] [mhi_initiate_m3] Waiting for M3 co
mpletion.
<6>[ 9999.132743] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[ 9999.132805] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 5
<6>[ 9999.132826] [0:MHI_STATE_THREA: 4605] [process_M3_transition] Processing
M3 state transition
<6>[ 9999.132867] [0: kworker/u16:12:32531] [mhi_initiate_m3] M3 completion rec

eived
<6>[ 9999.132899] [0: kworker/u16:12:32531] [mhi_turn_off_pcie_link] Entered...
<6>[ 9999.146002] [0: kworker/u16:12:32531] mhi 0000:01:00.0: [debug] pmcsr reg
: b dev->current_state : 0
<6>[ 9999.146161] [0: kworker/u16:12:32531] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[ 9999.146243] [0: kworker/u16:12:32531] exynos-pcie 10ee0000.pcie0: ack mes
sage is ok
<6>[ 9999.146264] [0: kworker/u16:12:32531] exynos-pcie 10ee0000.pcie0: receive
d Enter_L23_READY DLLP packet
<6>[ 9999.146291] [0: kworker/u16:12:32531] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[ 9999.146407] [0: kworker/u16:12:32531] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[ 9999.165796] [0: thread_hotplug:18208] frequency info : 1104000, prev_cmd
1, exe_cmd 4
<6>[ 9999.165826] [0: thread_hotplug:18208] lcd is on : 0, low power mode = 1,
dm_hotplug disable = 0
<6>[ 9999.165840] [0: thread_hotplug:18208] cluster1 cores hotplug out : 0
<4>[ 9999.166364] [1:
swapper/1:
0] CPU1: Booted secondary processor
<6>[ 9999.167546] [0: thread_hotplug:18208] MobiCore mcd: <- core_num=0x0000000
1, active_cpu=0x00000000
<6>[ 9999.167668] [0:
mc_fastcall: 1747] MobiCore mcd: CoreSwap ok 0 -> 1
<4>[ 9999.168271] [2:
swapper/2:
0] CPU2: Booted secondary processor
<4>[ 9999.169800] [3:
swapper/3:
0] CPU3: Booted secondary processor
<6>[ 9999.180953] [2: kworker/u16:12:32531] [mhi_turn_off_pcie_link] Exited...
<6>[ 9999.269285] [0: thread_hotplug:18208] frequency info : 900000, prev_cmd 4
, exe_cmd 1
<6>[ 9999.269317] [0: thread_hotplug:18208] lcd is on : 0, low power mode = 0,
dm_hotplug disable = 0
<6>[ 9999.269334] [0: thread_hotplug:18208] cluster1 cores hotplug out : 0
<5>[ 9999.273128] [0: thread_hotplug:18208] CPU3: shutdown
<5>[ 9999.277436] [0: thread_hotplug:18208] CPU2: shutdown
<6>[ 9999.282239] [0: thread_hotplug:18208] MobiCore mcd: <- core_num=0x0000000
0, active_cpu=0x00000001
<6>[ 9999.282402] [1:
mc_fastcall: 1747] MobiCore mcd: CoreSwap ok 1 -> 0
<5>[ 9999.285041] [0: thread_hotplug:18208] CPU1: shutdown
<6>[ 9999.325893] [0: kworker/u16:12:32531] vfsspi_work_func_debug ldo: 3, slee
p: 0, irq: 0, tz: 1, type: viper
<6>[ 9999.325931] [0: kworker/u16:12:32531] [SSP] debug_work_func: (0) - Sensor
state: 0x1fc3febf, RC: 1, CC: 0 DC: 0 TC: 0
<6>[ 9999.325950] [0: kworker/u16:12:32531] [SSP] 13 : 1(1ms)
<6>[10002.485854] [0: thread_hotplug:18208] frequency info : 1000000, prev_cmd
1, exe_cmd 4
<6>[10002.485887] [0: thread_hotplug:18208] lcd is on : 0, low power mode = 1,
dm_hotplug disable = 0
<6>[10002.485903] [0: thread_hotplug:18208] cluster1 cores hotplug out : 0
<4>[10002.486506] [1:
swapper/1:
0] CPU1: Booted secondary processor
<6>[10002.487688] [0: thread_hotplug:18208] MobiCore mcd: <- core_num=0x0000000
1, active_cpu=0x00000000
<6>[10002.487808] [0:
mc_fastcall: 1747] MobiCore mcd: CoreSwap ok 0 -> 1
<4>[10002.488422] [2:
swapper/2:
0] CPU2: Booted secondary processor
<4>[10002.490661] [3:
swapper/3:
0] CPU3: Booted secondary processor
<6>[10002.589581] [0: thread_hotplug:18208] frequency info : 800000, prev_cmd 4
, exe_cmd 1
<6>[10002.589691] [0: thread_hotplug:18208] lcd is on : 0, low power mode = 0,
dm_hotplug disable = 0
<6>[10002.589749] [0: thread_hotplug:18208] cluster1 cores hotplug out : 0
<4>[10002.593008] [3:
migration/3: 23] migrate_irqs: 28 callbacks suppress
ed

<4>[10002.593030] [3:
migration/3: 23]
<4>[10002.593151] [3:
migration/3: 23]
<5>[10002.594589] [0: thread_hotplug:18208]
<4>[10002.596956] [2:
migration/2: 18]
<4>[10002.597089] [2:
migration/2: 18]
<5>[10002.598663] [0: thread_hotplug:18208]
<6>[10002.605879] [0: thread_hotplug:18208]
0, active_cpu=0x00000001
<6>[10002.605987] [1:
mc_fastcall: 1747]
<4>[10002.606816] [1:
migration/1: 13]
<4>[10002.606939] [1:
migration/1: 13]
<5>[10002.608385] [0: thread_hotplug:18208]
<6>[10002.709199] [0: thread_hotplug:18208]
1, exe_cmd 4
<6>[10002.709231] [0: thread_hotplug:18208]
dm_hotplug disable = 0
<6>[10002.709247] [0: thread_hotplug:18208]
<4>[10002.709849] [1:
swapper/1:
0]
<6>[10002.711002] [0: thread_hotplug:18208]
1, active_cpu=0x00000000
<6>[10002.711122] [0:
mc_fastcall: 1747]
<4>[10002.711743] [2:
swapper/2:
0]
<4>[10002.713908] [3:
swapper/3:
0]
<6>[10002.812552] [0: thread_hotplug:18208]
, exe_cmd 1
<6>[10002.812583] [0: thread_hotplug:18208]
dm_hotplug disable = 0
<6>[10002.812600] [0: thread_hotplug:18208]
<4>[10002.814575] [3:
migration/3: 23]
<4>[10002.814721] [3:
migration/3: 23]
<5>[10002.816256] [0: thread_hotplug:18208]
<4>[10002.818929] [2:
migration/2: 18]
<4>[10002.819096] [2:
migration/2: 18]
<5>[10002.820690] [0: thread_hotplug:18208]
<6>[10002.822498] [0: thread_hotplug:18208]
0, active_cpu=0x00000001
<6>[10002.822605] [1:
mc_fastcall: 1747]
<5>[10002.825362] [0: thread_hotplug:18208]
<6>[10003.025987] [0: thread_hotplug:18208]
1, exe_cmd 4
<6>[10003.026014] [0: thread_hotplug:18208]
dm_hotplug disable = 0
<6>[10003.026028] [0: thread_hotplug:18208]
<4>[10003.026499] [1:
swapper/1:
0]
<6>[10003.027405] [0: thread_hotplug:18208]
1, active_cpu=0x00000000
<6>[10003.027529] [0:
mc_fastcall: 1747]
<4>[10003.028139] [2:
swapper/2:
0]
<4>[10003.029702] [3:
swapper/3:
0]
<6>[10003.129252] [0: thread_hotplug:18208]
, exe_cmd 1
<6>[10003.129284] [0: thread_hotplug:18208]
dm_hotplug disable = 0
<6>[10003.129301] [0: thread_hotplug:18208]
<5>[10003.134858] [0: thread_hotplug:18208]
<5>[10003.142395] [0: thread_hotplug:18208]
<6>[10003.145815] [0: thread_hotplug:18208]
0, active_cpu=0x00000001
<6>[10003.145930] [1:
mc_fastcall: 1747]
<5>[10003.148279] [0: thread_hotplug:18208]

IRQ151 no longer
IRQ250 no longer
CPU3: shutdown
IRQ150 no longer
IRQ250 no longer
CPU2: shutdown
MobiCore mcd: <-

affine to CPU3
affine to CPU3
affine to CPU2
affine to CPU2
core_num=0x0000000

MobiCore mcd: CoreSwap ok 1 -> 0


IRQ149 no longer affine to CPU1
IRQ250 no longer affine to CPU1
CPU1: shutdown
frequency info : 1000000, prev_cmd
lcd is on : 0, low power mode = 1,
cluster1 cores hotplug out : 0
CPU1: Booted secondary processor
MobiCore mcd: <- core_num=0x0000000
MobiCore mcd: CoreSwap ok 0 -> 1
CPU2: Booted secondary processor
CPU3: Booted secondary processor
frequency info : 900000, prev_cmd 4
lcd is on : 0, low power mode = 0,
cluster1 cores hotplug out : 0
IRQ151 no longer affine to CPU3
IRQ250 no longer affine to CPU3
CPU3: shutdown
IRQ150 no longer affine to CPU2
IRQ250 no longer affine to CPU2
CPU2: shutdown
MobiCore mcd: <- core_num=0x0000000
MobiCore mcd: CoreSwap ok 1 -> 0
CPU1: shutdown
frequency info : 1104000, prev_cmd
lcd is on : 0, low power mode = 1,
cluster1 cores hotplug out : 0
CPU1: Booted secondary processor
MobiCore mcd: <- core_num=0x0000000
MobiCore mcd: CoreSwap ok 0 -> 1
CPU2: Booted secondary processor
CPU3: Booted secondary processor
frequency info : 900000, prev_cmd 4
lcd is on : 0, low power mode = 0,
cluster1 cores hotplug out : 0
CPU3: shutdown
CPU2: shutdown
MobiCore mcd: <- core_num=0x0000000
MobiCore mcd: CoreSwap ok 1 -> 0
CPU1: shutdown

<4>[10003.249971] [1:
swapper/1:
0] CPU1: Booted secondary processor
<6>[10003.252802] [0: thread_hotplug:18208] MobiCore mcd: <- core_num=0x0000000
1, active_cpu=0x00000000
<6>[10003.252916] [0:
mc_fastcall: 1747] MobiCore mcd: CoreSwap ok 0 -> 1
<4>[10003.253597] [2:
swapper/2:
0] CPU2: Booted secondary processor
<6>[10003.256535] [0: thread_hotplug:18208] frequency info : 900000, prev_cmd 1
, exe_cmd 5
<6>[10003.256555] [0: thread_hotplug:18208] lcd is on : 0, low power mode = 1,
dm_hotplug disable = 0
<6>[10003.256572] [0: thread_hotplug:18208] cluster1 cores hotplug out : 0
<5>[10003.561720] [0: thread_hotplug:18208] CPU2: shutdown
<6>[10003.565128] [0: thread_hotplug:18208] MobiCore mcd: <- core_num=0x0000000
0, active_cpu=0x00000001
<6>[10003.565437] [1:
mc_fastcall: 1747] MobiCore mcd: CoreSwap ok 1 -> 0
<5>[10003.570234] [0: thread_hotplug:18208] CPU1: shutdown
<6>[10003.572128] [0: thread_hotplug:18208] frequency info : 400000, prev_cmd 5
, exe_cmd 1
<6>[10003.572178] [0: thread_hotplug:18208] lcd is on : 0, low power mode = 1,
dm_hotplug disable = 0
<6>[10003.572215] [0: thread_hotplug:18208] cluster1 cores hotplug out : 0
<6>[10004.345244] I[0:
swapper/0:
0] exynos-pcie 10ee0000.pcie0: cp2ap_w
ake irq involked
<6>[10004.345522] [0:
kworker/0:1:25228] exynos-pcie 10ee0000.pcie0: PCIe: W
ake work for RC0
<6>[10004.345582] [0:
kworker/0:1:25228] exynos-pcie 10ee0000.pcie0: Callbac
k for the event : 4
<6>[10004.345624] [0:
kworker/0:1:25228] [mhi_link_state_cb] Received MSM_PC
IE_EVENT_WAKE
<6>[10004.345917] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 10
<6>[10004.345965] [0:MHI_STATE_THREA: 4605] [process_WAKE_transition] Entered
<6>[10004.346010] [0:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[10004.346061] [0:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, start of poweron, pcie state: 0
<6>[10004.386703] [0:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: D state
: 0, 9d1600
<6>[10004.402100] [0:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_reset: Link up : 0x03934111
<6>[10004.402625] [0:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, end of poweron, pcie state: 3
<6>[10004.416095] [0:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] pmcsr reg
: 8 dev->current_state : 3
<6>[10004.416263] [0:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[10004.416312] [0:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
y for the link of RC0
<6>[10004.416357] [0:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
config space of RC0 and its EP
<6>[10004.416400] [0:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
RC0
<6>[10004.416486] [0:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
EP of RC0
<6>[10004.416949] [0:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Refresh
ing the saved config space in PCI framework for RC0 and its EP
<6>[10004.422278] [0:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[10004.422369] [0:MHI_STATE_THREA: 4605] [process_WAKE_transition] MHI is in
itialized, transitioning to M0.
<6>[10004.422419] [0:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Entered MHI state
5, Pending M0 0 Pending M3 0
<6>[10004.422467] [0:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Waiting for M0 M1

or M3. Currently 5...


<6>[10004.422513] [0:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Wait complete sta
te: 5
<6>[10004.422557] [0:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[10004.422597] [0:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[10004.422639] [0:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Setting M0 ...
<6>[10004.422873] [0:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Exited...
<6>[10004.422914] [0:MHI_STATE_THREA: 4605] [process_WAKE_transition] Exited.
<6>[10004.425314] [0: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 5 link 1, ring type 2, index 0 db 0x5fa26390
<6>[10004.425400] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10004.425512] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[10004.425558] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[10004.425607] [0:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[10004.430339] [0:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 10
00 80 01 01 04 81 02 01 00 04 00 18 01 00
<6>[10004.456156] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[10004.665192] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10004.665315] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[10004.665364] [0:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[10004.665424] [0:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[10004.665728] [0:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[10005.669686] [0: kworker/u16:6:32449] [mhi_initiate_m3] Entered MHI state
4, Pending M0 0 Pending M3 0
<6>[10005.669772] [0: kworker/u16:6:32449] [mhi_initiate_m3] Triggering wake o
ut of M2
<6>[10005.672056] [0: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa263c0
<6>[10005.672136] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10005.672247] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[10005.672296] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[10005.672450] [0:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[10005.676869] [0: kworker/u16:6:32449] [mhi_initiate_m3] Cancelled M1 time
r, timer was not active
<6>[10005.677109] [0: kworker/u16:6:32449] [mhi_initiate_m3] Waiting for M3 co
mpletion.
<6>[10005.677185] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[10005.690830] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10005.690968] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 5
<6>[10005.691016] [0:MHI_STATE_THREA: 4605] [process_M3_transition] Processing
M3 state transition
<6>[10005.691104] [0: kworker/u16:6:32449] [mhi_initiate_m3] M3 completion rec
eived
<6>[10005.691172] [0: kworker/u16:6:32449] [mhi_turn_off_pcie_link] Entered...
<6>[10005.703150] [0: kworker/u16:6:32449] mhi 0000:01:00.0: [debug] pmcsr reg
: b dev->current_state : 0
<6>[10005.703351] [0: kworker/u16:6:32449] mhi 0000:01:00.0: [debug] device_ve

ndor_id reg : 30017cb


<6>[10005.703469] [0: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: ack mes
sage is ok
<6>[10005.703515] [0: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: receive
d Enter_L23_READY DLLP packet
<6>[10005.703570] [0: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[10005.703755] [0: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[10005.733830] [0: kworker/u16:6:32449] [mhi_turn_off_pcie_link] Exited...
<6>[10005.969352] [0: thread_hotplug:18208] frequency info : 1104000, prev_cmd
1, exe_cmd 4
<6>[10005.969380] [0: thread_hotplug:18208] lcd is on : 0, low power mode = 1,
dm_hotplug disable = 0
<6>[10005.969395] [0: thread_hotplug:18208] cluster1 cores hotplug out : 0
<4>[10005.969906] [1:
swapper/1:
0] CPU1: Booted secondary processor
<6>[10005.970925] [0: thread_hotplug:18208] MobiCore mcd: <- core_num=0x0000000
1, active_cpu=0x00000000
<6>[10005.971030] [0:
mc_fastcall: 1747] MobiCore mcd: CoreSwap ok 0 -> 1
<4>[10005.971613] [2:
swapper/2:
0] CPU2: Booted secondary processor
<4>[10005.973257] [3:
swapper/3:
0] CPU3: Booted secondary processor
<6>[10006.175900] [0: thread_hotplug:18208] frequency info : 900000, prev_cmd 4
, exe_cmd 1
<6>[10006.175933] [0: thread_hotplug:18208] lcd is on : 0, low power mode = 0,
dm_hotplug disable = 0
<6>[10006.175950] [0: thread_hotplug:18208] cluster1 cores hotplug out : 0
<5>[10006.179495] [0: thread_hotplug:18208] CPU3: shutdown
<5>[10006.183476] [0: thread_hotplug:18208] CPU2: shutdown
<6>[10006.185195] [0: thread_hotplug:18208] MobiCore mcd: <- core_num=0x0000000
0, active_cpu=0x00000001
<6>[10006.185315] [1:
mc_fastcall: 1747] MobiCore mcd: CoreSwap ok 1 -> 0
<5>[10006.187728] [0: thread_hotplug:18208] CPU1: shutdown
<6>[10007.653051] [0:
kworker/0:1:25228] [Time-to-FULL] 368634(secs), 6143(m
ins)
<6>[10007.653922] [0:
kworker/0:1:25228] [Time-to-EMPTY] 26493(secs), 441(mi
ns)
<6>[10007.701553] [0:
kworker/0:1:25228] [FG] 0080h,ffa5h,7f80h,ff01h,1900h,
0f61h,5ad8h,53b1h,1b4ch,ce1eh,fc06h,f98dh,00ceh,54abh,5c87h,0fb9h,1095h,1266h,33
80h,5c00h,064ch,0148h,1ac9h,5c1ch,1439h,cdb8h,2c0fh,da96h,41a5h,0314h,0320h,0eec
h,ffffh,20b0h,2000h,127ch,1400h,2305h,1ac9h,8080h,2472h,cea4h,203bh,09d0h,e3e1h,
290eh,0400h,0000h,4005h,28a9h,1603h,0241h,0000h,10eeh,ebc8h,05e0h,0050h,1a45h,7d
54h,f98dh,1680h,1008h,542fh,e000h,0000h,a900h,1005h,0000h,cda9h,0a8bh,7210h,001b
h,5df9h,2271h,0fb4h,0000h,d90dh,d767h,18e2h,0000h,0000h,0000h,7f80h,0000h,0000h,
0005h,011ah,05e4h,0000h,006bh,090ch,0050h,0a9bh,0204h,094dh,0000h,039eh,100fh,0c
0eh,0c0dh,0c0ch,0c0bh,0c0ah,0c09h,0c08h,a516h,4350h,0010h,005ch,ffffh,5cb6h,0f5d
h,0caah,82ffh,ff00h,0007h,a800h,d9e2h,d9e2h,0001h,4c50h,fffch,4170h,0000h,4000h,
0000h,acf0h,0620h,0000h,0000h,0000h,0000h,233eh,0000h,0040h,f37eh,4040h,5672h,fe
95h,d263h,004ah,2910h,ce1eh,5490h,
<7>[10007.703594] [0:
kworker/0:1:25228] max77843_fg_write_temp: temperature
to (278, 0x1bcd)
<6>[10007.704167] [0:
kworker/0:1:25228] max77843_fg_check_qrtable: QRTABLE2
0_REG(0x1603), QRTABLE30_REG(0x1005)
<6>[10007.707508] [0:
kworker/0:1:25228] max77843_fg_read_vcell: VCELL(4122)
, data(0xce1e)
<7>[10007.707838] [0:
kworker/0:1:25228] max77843_get_fuelgauge_soc: soc(908
), low_batt_alarm(0)
<6>[10007.707891] [0:
kworker/0:1:25228] sec_bat_get_property cable type = 1
sleep_mode = 0
<7>[10007.708192] [0:
kworker/0:1:25228] max77843_chg_get_property : set-cur
rent(0mA), current now(433mA)

<6>[10007.708494] [0:
kworker/0:1:25228] max77843_fg_get_scaled_capacity : C
ABLE TYPE(1) INPUT CURRENT(433) CHARGINGE MODE(NONE)
<7>[10007.708538] [0:
kworker/0:1:25228] max77843_fg_get_scaled_capacity: ca
pacity_max (926)
<6>[10007.708841] [0:
kworker/0:1:25228] max77843_fg_get_scaled_capacity: sc
aled capacity (98.0)
<6>[10007.708917] [0:
kworker/0:1:25228] sec-battery battery.51: sec_bat_get
_battery_info:Vnow(4122mV),Inow(-159mA),Isysnow(-1mA),Imax(460mA),SOC(98%),Tbat(
278),Tchg(283),Twpc(0),is_hc_usb(0)
<6>[10007.708972] [0:
kworker/0:1:25228] sec-battery battery.51: Connected,V
avg(4114mV),Vocv(4207mV),Tamb(278),Iavg(-256mA),Isysavg(-1mA),Iadc(0)
<6>[10007.710271] [0:
kworker/0:1:25228] sdchg_ic_use_adc_check : SELF_DISCH
ARGING(0) SELF_DISCHARGING_ADC(0)
<6>[10007.710329] [0:
kworker/0:1:25228] sec-battery battery.51: sdchg_ic_us
e_discharging_check: Auto_DIS(0), Force_DIS(0)
<6>[10007.710648] [0:
kworker/0:1:25228] max77843_get_float_voltage: battery
cv voltage 0x1d, chg_float_voltage = 4350mV
<6>[10007.710697] [0:
kworker/0:1:25228] sec_bat_swelling_check: status(2),
swell_mode(0:1), cv(0x1d), temp(278)
<6>[10007.710735] [0:
kworker/0:1:25228] sec_bat_swelling_check: DISCHARGING
or NOT-CHARGING. stop swelling mode
<6>[10007.710798] [0:
kworker/0:1:25228] sec-battery battery.51: sec_bat_mon
itor_work: Status(Discharging), mode(None), Health(Good), Cable(1), level(100%),
HV(NONE), Cycle(599)
<6>[10007.710850] [0:
kworker/0:1:25228] power_supply battery: power_supply_
changed
<6>[10007.711053] [0:
kworker/0:1:25228] sec_bat_get_property cable type = 1
sleep_mode = 0
<6>[10007.711119] [0:
kworker/0:1:25228] sec_bat_get_property cable type = 1
<6>[10007.724881] [0:
healthd: 3346] sec_bat_get_property cable type = 1
sleep_mode = 0
<12>[10007.727351] [0:
healthd: 3346] healthd: battery l=98 v=4122 t=27.
8 h=2 st=3 c=0 o=1 ca=-256 ct=0 ps=0 chg= 2016-11-17 16:20:21.746893041 UTC
<12>[10007.727477] [0:
healthd: 3346] healthd: battery l=98 v=4122 t=27.
8 h=2 st=3 c=0 o=1 ca=-256 ct=0 ps=0 chg= 2016-11-17 16:20:21.746893041 UTC hv=0
sec=0 chg=
<14>[10007.727555] [0:
healthd: 3346] healthd-android: healthd_mode_andr
oid_battery_update
<14>[10007.727624] [0:
healthd: 3346] BatteryPropertiesRegistrar: notify
Listeners : start
<4>[10007.786854] [1:
swapper/1:
0] CPU1: Booted secondary processor
<6>[10007.792738] [0: thread_hotplug:18208] MobiCore mcd: <- core_num=0x0000000
1, active_cpu=0x00000000
<6>[10007.792851] [0:
mc_fastcall: 1747] MobiCore mcd: CoreSwap ok 0 -> 1
<4>[10007.793686] [2:
swapper/2:
0] CPU2: Booted secondary processor
<14>[10007.727804] [2:
healthd: 3346] IBatteryPropertiesListener : batte
ryPropertiesChanged!
<14>[10007.727804] [2:
healthd: 3346] : BatteryPropertiesRegistrar: noti
fyListeners : done
<6>[10007.805925] [0: thread_hotplug:18208] frequency info : 1000000, prev_cmd
1, exe_cmd 4
<6>[10007.805952] [0: thread_hotplug:18208] lcd is on : 0, low power mode = 1,
dm_hotplug disable = 0
<6>[10007.805967] [0: thread_hotplug:18208] cluster1 cores hotplug out : 0
<4>[10007.806814] [3:
swapper/3:
0] CPU3: Booted secondary processor
<4>[10008.019297] [0:
kworker/0:1:25228] dhd_prot_ioctl: SET PM to 2
<6>[10008.021598] [0: system_server: 4318] PM: suspend entry 2016-11-17 16:20:
22.042467363 UTC
<6>[10008.021655] [1: system_server: 4318] PM: Syncing filesystems ... done.

<7>[10008.034086] [1: system_server: 4318]


<6>[10008.034278] [0: system_server: 4318]
ynamic_hotplug CMD_SLEEP_PREPARE
<6>[10008.034328] [0: system_server: 4318]
leep_prepare_cpus : 5
<4>[10008.035474] [4:
swapper/4:
0]
<6>[10008.038555] [0: thread_hotplug:18208]
<6>[10008.090420] [1: system_server: 4318]
> (set_volt: 675000, get_volt: 675000)
<6>[10008.091100] [1: system_server: 4318]
=> (set_volt: 687500, get_volt: 687500)
<6>[10008.091893] [1: system_server: 4318]
> 687500
<6>[10008.091916] [1: system_server: 4318]
<6>[10008.091934] [1: system_server: 4318]
<6>[10008.091968] [1: system_server: 4318]
uest
<3>[10008.093396] [2:
mdm_helper: 3355]
<4>[10008.093015] [1: system_server: 4318]
<6>[10008.095406] [1: system_server: 4318]
l
<4>[10008.095436] [1: system_server: 4318]
<3>[10008.095453] [1: system_server: 4318]
02 seconds
<3>[10008.097170] [2:
mdm_helper: 3355]
<4>[10008.095469] [1: system_server: 4318]
<6>[10008.099865] [2:onic.tuiservice: 659]

PM: Preparing system for mem sleep


exynos_dm_hotplug_notifier, 958 : d

<6>[10008.099895] [2:onic.tuiservice: 659]


<6>[10008.100269] [0: thread_hotplug:19102]
, exe_cmd 4
<6>[10008.100297] [0: thread_hotplug:19102]
dm_hotplug disable = 0
<6>[10008.100314] [0: thread_hotplug:19102]
<6>[10008.104990] [1: system_server: 4318]
equest
<6>[10008.105023] [1: system_server: 4318]
<6>[10008.105150] [1: system_server: 4318]
2.126040204 UTC
<6>[10008.122393] [1: kworker/u16:8:32451]
<7>[10008.122440] [1: kworker/u16:8:32451]
time_resume
<6>[10008.122458] [1: kworker/u16:8:32451]
<7>[10008.122483] [1: kworker/u16:8:32451]
amsung_usb2phy_runtime_resume
<6>[10008.122532] [1: kworker/u16:8:32451]
hild=0
<7>[10008.122557] [1: kworker/u16:8:32451]
<7>[10008.122578] [1: kworker/u16:8:32451]
hub
<7>[10008.122599] [1: kworker/u16:8:32451]
<7>[10008.145869] [1: kworker/u16:8:32451]
<7>[10008.145938] [1: kworker/u16:8:32451]
ange 0000
<7>[10008.146001] [1: kworker/u16:8:32451]
<7>[10008.146096] [0:
khubd: 742]
00 evt 0000
<6>[10008.148898] [0: kworker/u16:8:32451]
<6>[10008.149150] [2: kworker/u16:21:32544]
<6>[10008.289262] [1:
kworker/1:4:14113]

TUI_IO_WAITCMD
frequency info : 900000, prev_cmd 1

nr_sleep_prepare_cpus : 4, tmp_nr_s
CPU4: Booted secondary processor
stopped thread_hotplug
MIF(635000): set TMU_COLD: 637500 =
DISP(100000): set TMU_COLD: 650000
INT(100000): set TMU_COLD: 650000 =
tmu temperature state 0 to 1
gpu temperature state 0 to 1
mdm_hsic_pm_notify_event: block req
esoc REQ engine released from wait
Freezing user space processes ...
last active wakeup source: eventpol
Freezing of tasks aborted after 0.0
esoc REQ enginer waiting on request
Restarting tasks ... done.
t-base-tui module: ioctl 0x80047402

lcd is on : 0, low power mode = 0,


cluster1 cores hotplug out : 0
mdm_hsic_pm_notify_event: unblock r
request_active_lock_set
PM: suspend exit 2016-11-17 16:20:2
mdm_hsic_rpm_check
s5p-ehci 15510000.usb: s5p_ehci_run
request_active_lock_set
samsung-usb2phy 15530000.usb2phy: s
s5p_ehci_runtime_resume: usage=1, c
usb usb1: usb auto-resume
s5p-ehci 15510000.usb: resume root
s5p-ehci 15510000.usb: LRESET 0
hub 1-0:1.0: hub_resume
hub 1-0:1.0: port 2: status 0503 ch
usb 1-2: finish resume
hub 1-0:1.0: state 7 ports 2 chg 00
[CHKRA:5]>
mdm_hsic_rpm_restart
MIF(418000): unset TMU_COLD: 612500

=> (set_volt: 575000, get_volt: 575000)


<6>[10008.290213] [1:
kworker/1:4:14113]
volt: 650000, get_volt: 650000)
<6>[10008.291365] [1:
kworker/1:4:14113]
=> 650000
<6>[10008.291412] [1:
kworker/1:4:14113]
emp : 33
<7>[10008.658909] [0:
kworker/0:1:25228]
<7>[10008.669248] [0:
kworker/0:1:25228]
<7>[10008.669318] [0:
kworker/0:1:25228]
1
<7>[10008.669369] [0:
kworker/0:1:25228]
hub
<3>[10008.670202] [0:
kworker/0:1:25228]
time_suspend
<7>[10008.682528] [0:
kworker/0:1:25228]
amsung_usb2phy_runtime_suspend
<6>[10008.682598] [0:
kworker/0:1:25228]
<6>[10008.682667] [0:
kworker/0:1:25228]
child=0
<6>[10008.683104] [1: system_server: 4318]
22.703983847 UTC
<6>[10008.683149] [1: system_server: 4318]
<7>[10008.692540] [1: system_server: 4318]
<6>[10008.692842] [2: system_server: 4318]
ynamic_hotplug CMD_SLEEP_PREPARE
<6>[10008.692893] [2: system_server: 4318]
leep_prepare_cpus : 5
<6>[10008.693141] [0: thread_hotplug:19102]
<6>[10008.704164] [0: system_server: 4318]
> (set_volt: 612500, get_volt: 612500)
<6>[10008.705051] [0: system_server: 4318]
=> (set_volt: 687500, get_volt: 687500)
<6>[10008.706103] [0: system_server: 4318]
> 687500
<6>[10008.706151] [0: system_server: 4318]
<6>[10008.706205] [0: system_server: 4318]
uest
<3>[10008.708210] [2:
mdm_helper: 3355]
<4>[10008.707530] [0: system_server: 4318]
elapsed 0.008 seconds) done.
<4>[10008.715998] [0: system_server: 4318]
... (elapsed 0.009 seconds) done.
<7>[10008.725100] [0: system_server: 4318]
<4>[10008.725142] [0: system_server: 4318]
le_suspend to debug)
<6>[10008.727415] [0: system_server: 4318]
os_runtime_resume
<6>[10008.730120] [2: kworker/u16:8:32451]
<6>[10008.730174] [2: kworker/u16:8:32451]
MHI state 5
<4>[10008.730201] [0: system_server: 4318]
0x00000001
<6>[10008.730229] [2: kworker/u16:8:32451]
5, Pending M0 0 Pending M3 0
<6>[10008.730264] [2: kworker/u16:8:32451]
state 0.
<4>[10008.730454] [0: system_server: 4318]
_D3_INFORM to dongle
<4>[10008.731689] I[0:
swapper/0:
0]

DISP(100000): unset TMU_COLD: (set_


INT(100000): unset TMU_COLD: 687500
tmu temperature state 1 to 0, cur_t
usb 1-2: usb auto-suspend, wakeup 1
hub 1-0:1.0: hub_suspend
usb usb1: bus auto-suspend, wakeup
s5p-ehci 15510000.usb: suspend root
s5p-ehci 15510000.usb: s5p_ehci_run
samsung-usb2phy 15530000.usb2phy: s
request_active_lock_release
s5p_ehci_runtime_suspend: usage=0,
PM: suspend entry 2016-11-17 16:20:
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
exynos_dm_hotplug_notifier, 958 : d
nr_sleep_prepare_cpus : 4, tmp_nr_s
stopped thread_hotplug
MIF(418000): set TMU_COLD: 575000 =
DISP(100000): set TMU_COLD: 650000
INT(100000): set TMU_COLD: 650000 =
tmu temperature state 0 to 1
mdm_hsic_pm_notify_event: block req
esoc REQ engine released from wait
Freezing user space processes ... (
Freezing remaining freezable tasks
PM: Entering mem sleep
Suspending console(s) (use no_conso
exynos-dwc3 15400000.usb: dwc3_exyn
[mhi_suspend] [mhi_suspend]
[mhi_suspend] Entered, sys state 2,
dhdpcie_send_mb_data: H2D_MB_DATA:
[mhi_initiate_m3] Entered MHI state
[mhi_initiate_m3] MHI state 5, link
dhdpcie_send_mb_data: send H2D_HOST
D2H_MB_DATA: 0x00000001

<4>[10008.731724]
Received D3 ACK
<4>[10008.732133]
0x00000008
<4>[10008.732712]
_D0_INFORM_IN_USE
<4>[10008.733080]
<6>[10008.733511]
43e914e4
<6>[10008.733715]
100146
<6>[10008.733922]
2800003
<6>[10008.734129]
10
<6>[10008.734338]
1c200004
<6>[10008.734545]
0
<6>[10008.734755]
1c400004
<6>[10008.734963]
0
<6>[10008.735171]
0
<6>[10008.735383]
0
<6>[10008.735591]
0
<6>[10008.735840]
77414e4
<6>[10008.736009]
0
<6>[10008.736221]
48
<6>[10008.736429]
0
<6>[10008.736635]
1ed
<6>[10008.736844]
2c10
<6>[10008.737053]
142
<6>[10008.737081]
0
<6>[10008.737108]
0
<6>[10008.737261]
: 400
<6>[10008.737468]
: 1
<6>[10008.737496]
: 0
<6>[10008.740183]
device_vendor_id
<6>[10008.740384]
PMCSR reg value:
<6>[10008.740593]
PMCSR reg value:
<6>[10008.740767]

I[0:

swapper/0:

0] dhdpcie_handle_mb_data D2H_MB_DATA:

[0: system_server: 4318] dhdpcie_send_mb_data: H2D_MB_DATA:


[0: system_server: 4318] dhdpcie_send_mb_data: send H2D_HOST
to dongle
[0: system_server: 4318] dhdpcie_suspend_dev: Enter
[0: system_server: 4318] pcieh 0001:01:00.0: reg offset: 0:
[0: system_server: 4318] pcieh 0001:01:00.0: reg offset: 4:
[0: system_server: 4318] pcieh 0001:01:00.0: reg offset: 8:
[0: system_server: 4318] pcieh 0001:01:00.0: reg offset: 12:
[0: system_server: 4318] pcieh 0001:01:00.0: reg offset: 16:
[0: system_server: 4318] pcieh 0001:01:00.0: reg offset: 20:
[0: system_server: 4318] pcieh 0001:01:00.0: reg offset: 24:
[0: system_server: 4318] pcieh 0001:01:00.0: reg offset: 28:
[0: system_server: 4318] pcieh 0001:01:00.0: reg offset: 32:
[0: system_server: 4318] pcieh 0001:01:00.0: reg offset: 36:
[0: system_server: 4318] pcieh 0001:01:00.0: reg offset: 40:
[0: system_server: 4318] pcieh 0001:01:00.0: reg offset: 44:
[0: system_server: 4318] pcieh 0001:01:00.0: reg offset: 48:
[0: system_server: 4318] pcieh 0001:01:00.0: reg offset: 52:
[0: system_server: 4318] pcieh 0001:01:00.0: reg offset: 56:
[0: system_server: 4318] pcieh 0001:01:00.0: reg offset: 60:
[0: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_DEVCTL:
[0: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_LNKCTL:
[0: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_SLTCTL:
[0: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_RTCTL:
[0: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_DEVCTL2
[0: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_LNKCTL2
[0: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_SLTCTL2
[0:
reg :
[0:
4108
[0:
410b
[0:

system_server: 4318] pcieh 0001:01:00.0: [debug] step 1,


43e914e4
system_server: 4318] pcieh 0001:01:00.0: [debug] step 2,
system_server: 4318] pcieh 0001:01:00.0: [debug] step 3,
system_server: 4318] pcieh 0001:01:00.0: [debug] step 4,

device_vendor_id reg : 43e914e4


<6>[10008.752749] [0: system_server: 4318] pcieh 0001:01:00.0: [debug] pmcsr r
eg : 410b dev->current_state : 0
<6>[10008.752927] [0: system_server: 4318] pcieh 0001:01:00.0: [debug] device_
vendor_id reg : 43e914e4
<6>[10008.752988] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
0: a575144d
<6>[10008.753023] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
4: 100147
<6>[10008.753059] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
8: 6040001
<6>[10008.753223] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
12: 10010
<6>[10008.753258] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
16: 0
<6>[10008.753293] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
20: 0
<6>[10008.753328] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
24: 10100
<6>[10008.753364] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
28: 0
<6>[10008.753399] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
32: 1ff01c00
<6>[10008.753563] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
36: 0
<6>[10008.753599] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
40: 0
<6>[10008.753634] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
44: 0
<6>[10008.753669] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
48: 0
<6>[10008.753704] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
52: 40
<6>[10008.753739] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
56: 0
<6>[10008.753904] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
60: 101ed
<6>[10008.753940] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL: 2010
<6>[10008.753975] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL: 42
<6>[10008.754002] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL: 0
<6>[10008.754037] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_RTCT
L: 0
<6>[10008.754071] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL2: 400
<6>[10008.754242] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL2: 1
<6>[10008.754269] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL2: 0
<6>[10008.754443] [0: system_server: 4318] exynos-pcie 15660000.pcie1: ack mes
sage is ok
<6>[10008.754474] [0: system_server: 4318] exynos-pcie 15660000.pcie1: receive
d Enter_L23_READY DLLP packet
<6>[10008.754513] [0: system_server: 4318] exynos-pcie 15660000.pcie1: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[10008.754673] [0: system_server: 4318] exynos-pcie 15660000.pcie1: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[10008.759692] [0: system_server: 4318] voltage(793750) + volt_offset(37500

) is bigger than max_volt(793750)


<6>[10008.759746] [0: system_server:
) is bigger than max_volt(793750)
<6>[10008.760951] [0: system_server:
0 793750)
<6>[10008.763754] [0: system_server:
check : 0x00
<6>[10008.763971] [0: system_server:
2016-11-17 16:20:22(0x10)PM
<5>[10008.764384] [0: system_server:
I cache
<6>[10008.770030] [0: system_server:
check : 0x00
<6>[10008.770252] [0: system_server:
2016-11-17 16:20:22(0x10)PM
<6>[10008.771565] [0: system_server:
check : 0x00
<6>[10008.771765] [0: system_server:
2016-11-17 16:20:22(0x10)PM
<6>[10008.771806] [0: system_server:
2016-11-17 16:20:28(0x10)PM
<6>[10008.773230] [0: system_server:
check : 0x00
<6>[10008.774606] [0: system_server:
check : 0x00
<6>[10008.775212] [0: system_server:
<6>[10008.775580] [0: system_server:
<2>[10008.775813] [0: system_server:
spend called
<2>[10008.775838] [0: system_server:
d
<6>[10008.775893] [0: system_server:
<6>[10008.775920] [0: system_server:
<6>[10008.776903] [0: system_server:
<6>[10008.777082] [0: system_server:
c ret = 0
<6>[10008.777105] [0: system_server:
<6>[10008.777141] [0: system_server:
<6>[10008.777215] [0: system_server:
<6>[10008.783873] [0: system_server:
<6>[10008.784165] [0: system_server:
<6>[10008.784239] [0: system_server:
<6>[10008.784256] [0: system_server:
r smc : 122f122
<6>[10008.822979] [0: system_server:
enter
<6>[10008.823117] [0: system_server:
pend_post : set AIF1 port slave
<6>[10008.823209] [0: system_server:
<6>[10008.823236] [0: system_server:
<4>[10008.823278] [0: system_server:
<4>[10008.823306] [0: system_server:
_status : 0 (detach)
<4>[10008.823341] [0: system_server:
<4>[10008.823366] [0: system_server:
(open)
<6>[10008.837229] [0: system_server:
<6>[10008.837265] [0: system_server:
<6>[10008.837287] [0: system_server:
tatus to [0]

4318] voltage(793750) + volt_offset(37500


4318] DEVFREQ(MIF): suspend voltage(79375
4318] s2m_rtc_update: RTC_UPDATE_REGISTER
4318] s2m-rtc s2m-rtc: s2m_rtc_read_time:
4318] sd 0:0:0:0: [sda] Synchronizing SCS
4318] s2m_rtc_update: RTC_UPDATE_REGISTER
4318] s2m-rtc s2m-rtc: s2m_rtc_read_time:
4318] s2m_rtc_update: RTC_UPDATE_REGISTER
4318] s2m-rtc s2m-rtc: s2m_rtc_read_time:
4318] s2m-rtc s2m-rtc: s2m_rtc_set_alarm:
4318] s2m_rtc_update: RTC_UPDATE_REGISTER
4318] s2m_rtc_update: RTC_UPDATE_REGISTER
4318] max86900_pm_suspend
4318] wake enabled for irq 7
4318] --------Si47xx i2c driver Si47xx_su
4318] Si47xx_suspend: device not supporte
4318]
4318]
4318]
4318]

[VIB] max77843_haptic_suspend
[VIB] max77843_haptic_i2c 0
wake enabled for irq 4
vfsspi_regulator_onoff: ocp off, sm

4318]
4318]
4318]
4318]
4318]
4318]
4318]

vfsspi_regulator_onoff: off
vfsspi_pm_suspend
[SSP] ssp_suspend:
[SSP] ssp_send_cmd: command 0xd4 0
mst_ldo_device_suspend
MST_LDO_DRV]]] suspend
MST_LDO_DRV]]] suspend success afte

4318] [MAX98505_DEBUG] max98505_suspend:


4318] pacific-audio sound.34: pacific_sus
4318]
4318]
4318]
4318]

wake enabled for irq 577


wake enabled for irq 580
certify_hall_suspend start
[keys] certify_hall_suspend certify

4318] hall_suspend start


4318] [keys] hall_suspend flip_status : 1
4318] [MIF] usb_phy_prepare_shutdown
4318] dev rdy val = 1
4318] set_host_stat:set host port power s

<6>[10008.867274] [0: system_server: 4318] wait_dev_pwr_stat:[PWR OFF]...


<6>[10008.876192] I[0: system_server: 4318] mdm_device_ready_irq_handler, irq:
host ready val : 00000000
<6>[10008.876217] I[0: system_server: 4318] mdm_device_ready_irq_handler, irq:
dev ready val : 00000000
<6>[10008.897255] [0: system_server: 4318] done
<7>[10008.897318] [0: system_server: 4318] samsung-usb2phy 15530000.usb2phy: s
amsung_usb2phy_shutdown: End of setting for shutdown
<6>[10008.897640] [0: system_server: 4318] spi suspend is handled in device su
spend, dma mode = 0, bus_num = 3
<6>[10008.897676] [0: system_server: 4318] spi suspend is handled in device su
spend, dma mode = 0, bus_num = 1
<6>[10008.897818] [0: system_server: 4318] 3s3c24xx_serial_shutdown: port=4 res
et
<6>[10008.899204] [0: system_server: 4318] PM: suspend of devices complete aft
er 170.017 msecs
<6>[10008.899231] [0: system_server: 4318] ---Enabled regulators--<6>[10008.899272] [0: system_server: 4318] LDO1: 1200000uV, 0xffffffea mode, n
ull
<6>[10008.901443] [0: system_server: 4318] VDDIO_1.8V_COMP: 1800000uV, 0xfffff
fea mode, null
<6>[10008.902440] [0: system_server: 4318] VDDD_RET_1.0V_COMP: 700000uV, 0xfff
fffea mode, null
<6>[10008.904479] [0: system_server: 4318] VDD20_1P8_AP: 1800000uV, 0xffffffea
mode, null
<6>[10008.905177] [0: system_server: 4318] VCC_1.8V_CODEC_PMIC: 1800000uV, 0xf
fffffea mode, spi0.0-DBVDD1, spi0.0-AVDD, regulator.47-SUPPLY
<6>[10008.906905] [0: system_server: 4318] regulator-dummy: -22uV, 0xffffffea
mode, null
<6>[10008.906932] [0: system_server: 4318] Always On regulator count :10 [VDD2
2_1P1_2MIC][vdd_ldo8][vdd_mldo][vdd_lldo][vdd_disp_cam0][vdd_int][vdd_apollo][vd
d_atlas][vdd_mif][safeout1_range]
<6>[10008.906997] [0: system_server: 4318] ---Enabled regulator count: 16--<6>[10008.909337] [0: system_server: 4318] PM: late suspend of devices complet
e after 2.302 msecs
<6>[10008.910508] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
0: ffffffff
<6>[10008.910541] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
4: ffffffff
<6>[10008.910569] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
8: ffffffff
<6>[10008.910598] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
12: ffffffff
<6>[10008.910627] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
16: ffffffff
<6>[10008.910656] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
20: ffffffff
<6>[10008.910684] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
24: ffffffff
<6>[10008.910713] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
28: ffffffff
<6>[10008.910741] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
32: ffffffff
<6>[10008.910769] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
36: ffffffff
<6>[10008.910798] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
40: ffffffff
<6>[10008.910827] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
44: ffffffff
<6>[10008.910855] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:

48: ffffffff
<6>[10008.910883] [0: system_server:
52: ffffffff
<6>[10008.910912] [0: system_server:
56: ffffffff
<6>[10008.910941] [0: system_server:
60: ffffffff
<6>[10008.910969] [0: system_server:
TL: 0
<6>[10008.910996] [0: system_server:
TL: 0
<6>[10008.911024] [0: system_server:
TL: 0
<6>[10008.911051] [0: system_server:
L: 0
<6>[10008.911078] [0: system_server:
TL2: 0
<6>[10008.911105] [0: system_server:
TL2: 0
<6>[10008.911132] [0: system_server:
TL2: 0
<6>[10008.912423] [0: system_server:
eady off
<6>[10008.912458] [0: system_server:
eady off
<6>[10008.912648] [0: system_server:
oirq, dma mode = 1, bus_num = 4
<6>[10008.912687] [0: system_server:
oirq, dma mode = 1, bus_num = 0
<6>[10008.912978] [0: system_server:
te after 3.604 msecs
<4>[10008.913005] [0: system_server:
<6>[10008.913436] [0: system_server:
0, active_cpu=0x00000001
<6>[10008.913539] [1:
mc_fastcall:
<4>[10008.914919] [1:
migration/1:
ed
<4>[10008.914946] [1:
migration/1:
<5>[10008.916643] [0: system_server:
<4>[10008.919446] [2:
migration/2:
<5>[10008.920946] [0: system_server:
<4>[10008.923692] [3:
migration/3:
<4>[10008.923863] [3:
migration/3:
<5>[10008.925298] [0: system_server:
<4>[10008.927802] [4:
migration/4:
<5>[10008.928619] [0: system_server:
<6>[10008.929888] [0: system_server:
<6>[10008.929888] [0: system_server:
<6>[10008.929888] [0: system_server:
<6>[10008.929888] [0: system_server:
q
<6>[10008.929888] [0: system_server:
<6>[10008.930032] [0: system_server:
<4>[10008.930201] [1:
swapper/1:
<6>[10008.930858] [0: system_server:
1, active_cpu=0x00000000
<6>[10008.930905] [0:
mc_fastcall:
<6>[10008.930944] [0: system_server:
<4>[10008.931085] [2:
swapper/2:
<6>[10008.931679] [0: system_server:

4318] pcieport 0001:00:00.0: reg offset:


4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
4318] pcieport 0001:00:00.0: PCI_EXP_RTCT
4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
4318] exynos-pcie 15660000.pcie1: RC1 alr
4318] exynos-pcie 10ee0000.pcie0: RC0 alr
4318] spi suspend is handled in suspend_n
4318] spi suspend is handled in suspend_n
4318] PM: noirq suspend of devices comple
4318] Disabling non-boot CPUs ...
4318] MobiCore mcd: <- core_num=0x0000000
1747] MobiCore mcd: CoreSwap ok 1 -> 0
13] migrate_irqs: 18 callbacks suppress
13]
4318]
18]
4318]
23]
23]
4318]
28]
4318]
4318]
4318]
4318]
4318]

IRQ149 no longer affine to CPU1


CPU1: shutdown
IRQ150 no longer affine to CPU2
CPU2: shutdown
IRQ151 no longer affine to CPU3
IRQ250 no longer affine to CPU3
CPU3: shutdown
IRQ152 no longer affine to CPU4
CPU4: shutdown
[MIF] 1552000Khz
WAKEUP_STAT: 0x80000001
EINT_PEND: 0x00, 0x40 0x00, 0x80
Resume caused by IRQ 7, sec-pmic-ir

4318]
4318]
0]
4318]

Suspended for 0.000 seconds


Enabling non-boot CPUs ...
CPU1: Booted secondary processor
MobiCore mcd: <- core_num=0x0000000

1747]
4318]
0]
4318]

MobiCore mcd: CoreSwap ok 0 -> 1


CPU1 is up
CPU2: Booted secondary processor
CPU2 is up

<4>[10008.931826] [3:
swapper/3:
0] CPU3: Booted secondary processor
<6>[10008.932446] [0: system_server: 4318] CPU3 is up
<4>[10008.932676] [4:
swapper/4:
0] CPU4: Booted secondary processor
<6>[10008.933392] [0: system_server: 4318] CPU4 is up
<6>[10008.933589] [0: system_server: 4318] spi resume is handled in resume_noi
rq, dma mode = 1, bus_num = 0
<6>[10008.933647] [0: system_server: 4318] spi resume is handled in resume_noi
rq, dma mode = 1, bus_num = 4
<6>[10008.945651] [1: system_server: 4318] pcieport 0001:00:00.0: [debug] pmcs
r reg : ffff dev->current_state : 3
<6>[10008.945664] [1: system_server: 4318] pcieport 0001:00:00.0: [debug] devi
ce_vendor_id reg : ffffffff
<6>[10008.945676] [1: system_server: 4318] pcieport 0001:00:00.0: Refused to c
hange power state, currently in D3, PCI_PM_CTRL=ffff
<6>[10008.945688] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL: 0
<6>[10008.945699] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL: 0
<6>[10008.945709] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL: 0
<6>[10008.945718] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_RTCT
L: 0
<6>[10008.945728] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL2: 0
<6>[10008.945738] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL2: 0
<6>[10008.945747] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL2: 0
<6>[10008.945759] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x3c (was 0xffffffff, writing 0xffffffff)
<6>[10008.945771] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x38 (was 0xffffffff, writing 0xffffffff)
<6>[10008.945781] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x34 (was 0xffffffff, writing 0xffffffff)
<6>[10008.945792] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x30 (was 0xffffffff, writing 0xffffffff)
<6>[10008.945803] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x2c (was 0xffffffff, writing 0xffffffff)
<6>[10008.945814] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x28 (was 0xffffffff, writing 0xffffffff)
<6>[10008.945824] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x24 (was 0xffffffff, writing 0xffffffff)
<6>[10008.945835] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x20 (was 0xffffffff, writing 0xffffffff)
<6>[10008.945846] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x1c (was 0xffffffff, writing 0xffffffff)
<6>[10008.945857] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x18 (was 0xffffffff, writing 0xffffffff)
<6>[10008.945868] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x14 (was 0xffffffff, writing 0xffffffff)
<6>[10008.945879] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x10 (was 0xffffffff, writing 0xffffffff)
<6>[10008.945890] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0xc (was 0xffffffff, writing 0xffffffff)
<6>[10008.945900] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x8 (was 0xffffffff, writing 0xffffffff)
<6>[10008.945911] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x4 (was 0xffffffff, writing 0xffffffff)
<6>[10008.945922] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x0 (was 0xffffffff, writing 0xffffffff)

<6>[10008.945945] [1: system_server: 4318] pcieh 0001:01:00.0: [debug] step 1,


device_vendor_id reg : ffffffff
<6>[10008.945955] [1: system_server: 4318] pcieh 0001:01:00.0: [debug] step 2,
PMCSR reg value: ffff
<6>[10008.945965] [1: system_server: 4318] pcieh 0001:01:00.0: [debug] step 3,
PMCSR reg value: 0
<6>[10008.945975] [1: system_server: 4318] pcieh 0001:01:00.0: [debug] step 4,
device_vendor_id reg : ffffffff
<6>[10008.958975] [1: system_server: 4318] pcieh 0001:01:00.0: [debug] pmcsr r
eg : ffff dev->current_state : 3
<6>[10008.958985] [1: system_server: 4318] pcieh 0001:01:00.0: [debug] device_
vendor_id reg : ffffffff
<6>[10008.958996] [1: system_server: 4318] pcieh 0001:01:00.0: Refused to chan
ge power state, currently in D3, PCI_PM_CTRL=ffff
<6>[10008.959009] [1: system_server: 4318] exynos-pcie 15660000.pcie1: PCIE li
nk state is 0
<6>[10008.959019] [1: system_server: 4318] pcieh 0001:01:00.0: [debug] setp 5,
PMCSR reg value: ffff
<6>[10008.959030] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_DEVCTL:
2c10
<6>[10008.959040] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_LNKCTL:
142
<6>[10008.959049] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_SLTCTL:
0
<6>[10008.959058] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_RTCTL:
0
<6>[10008.959067] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_DEVCTL2
: 400
<6>[10008.959077] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_LNKCTL2
: 1
<6>[10008.959086] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_SLTCTL2
: 0
<6>[10008.959097] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x3c (was 0xffffffff, writing 0x1ed)
<6>[10008.959109] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x38 (was 0xffffffff, writing 0x0)
<6>[10008.959120] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x34 (was 0xffffffff, writing 0x48)
<6>[10008.959131] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x30 (was 0xffffffff, writing 0x0)
<6>[10008.959141] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x2c (was 0xffffffff, writing 0x77414e4)
<6>[10008.959152] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x28 (was 0xffffffff, writing 0x0)
<6>[10008.959163] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x24 (was 0xffffffff, writing 0x0)
<6>[10008.989133] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x20 (was 0xffffffff, writing 0x0)
<6>[10009.019102] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x1c (was 0xffffffff, writing 0x0)
<6>[10009.049071] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x18 (was 0xffffffff, writing 0x1c400004)
<6>[10009.079040] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x14 (was 0xffffffff, writing 0x0)
<6>[10009.109009] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x10 (was 0xffffffff, writing 0x1c200004)
<6>[10009.138979] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0xc (was 0xffffffff, writing 0x10)
<6>[10009.138990] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x8 (was 0xffffffff, writing 0x2800003)

<6>[10009.139002] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi


g space at offset 0x4 (was 0xffffffff, writing 0x100146)
<6>[10009.139012] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x0 (was 0xffffffff, writing 0x43e914e4)
<6>[10009.152310] [1: system_server: 4318] pcieport 0000:00:00.0: [debug] pmcs
r reg : ffff dev->current_state : 3
<6>[10009.152320] [1: system_server: 4318] pcieport 0000:00:00.0: [debug] devi
ce_vendor_id reg : ffffffff
<6>[10009.152331] [1: system_server: 4318] pcieport 0000:00:00.0: Refused to c
hange power state, currently in D3, PCI_PM_CTRL=ffff
<6>[10009.165634] [1: system_server: 4318] mhi 0000:01:00.0: [debug] pmcsr reg
: ffff dev->current_state : 3
<6>[10009.165644] [1: system_server: 4318] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : ffffffff
<6>[10009.165654] [1: system_server: 4318] mhi 0000:01:00.0: Refused to change
power state, currently in D3, PCI_PM_CTRL=ffff
<6>[10009.165772] [1: system_server: 4318] PM: noirq resume of devices complet
e after 232.364 msecs
<6>[10009.166214] [1: system_server: 4318] exynos-mailbox 11240000.mailbox: Lo
ading APM firmware ...
<6>[10009.166380] [1: system_server: 4318] OK
<6>[10009.167475] [1: system_server: 4318] PM: early resume of devices complet
e after 1.364 msecs
<6>[10009.167721] [2: kworker/u16:21:32544] [mhi_resume] [mhi_resume]
<6>[10009.167739] [2: kworker/u16:21:32544] [mhi_initiate_m0] Entered MHI state
5, Pending M0 0 Pending M3 0
<6>[10009.167750] [2: kworker/u16:21:32544] [mhi_initiate_m0] Waiting for M0 M1
or M3. Currently 5...
<6>[10009.167760] [2: kworker/u16:21:32544] [mhi_initiate_m0] Wait complete sta
te: 5
<6>[10009.167769] [2: kworker/u16:21:32544] [mhi_turn_on_pcie_link] Entered...
<6>[10009.167785] [2: kworker/u16:21:32544] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, start of poweron, pcie state: 0
<6>[10009.167960] [1: system_server: 4318] s3c2410_wdt: watchdog enabled
<6>[10009.171426] [1: system_server: 4318] spi resume is handled in device res
ume, dma mode = 0, bus_num = 1
<6>[10009.171461] [1: system_server: 4318] spi resume is handled in device res
ume, dma mode = 0, bus_num = 3
<7>[10009.171693] [1: system_server: 4318] samsung-usb2phy 15530000.usb2phy: C
an't configure specified phy mode
<7>[10009.171712] [1: system_server: 4318] samsung-usb2phy 15530000.usb2phy: e
nd of samsung_usb2phy_init
<7>[10009.171726] [1: system_server: 4318] samsung-usb2phy 15530000.usb2phy: s
amsung_usb2phy_runtime_resume
<4>[10009.171748] [1: system_server: 4318] usb usb1: root hub lost power or wa
s reset
<7>[10009.171770] [1: system_server: 4318] s5p-ehci 15510000.usb: reset comman
d 0080b02 park=3 ithresh=8 period=1024 Reset HALT
<6>[10009.171787] [1: system_server: 4318] dev rdy val = 0
<6>[10009.171794] [1: system_server: 4318] set_host_stat:set host port power s
tatus to [1]
<6>[10009.171806] [1: system_server: 4318] wait_dev_pwr_stat:[PWR ON]...
<6>[10009.193244] I[0:
swapper/0:
0] mdm_device_ready_irq_handler, irq:
host ready val : 00000001
<6>[10009.193254] I[0:
swapper/0:
0] mdm_device_ready_irq_handler, irq:
dev ready val : 00000001
<6>[10009.201767] [1: system_server: 4318] done
<7>[10009.201803] [3: kworker/u16:29:32553] usb usb1: usb resume
<7>[10009.201817] [3: kworker/u16:29:32553] s5p-ehci 15510000.usb: resume root
hub after power loss

<7>[10009.201829] [3: kworker/u16:29:32553] s5p-ehci 15510000.usb: LRESET 0


<7>[10009.201852] [3: kworker/u16:29:32553] hub 1-0:1.0: hub_reset_resume
<7>[10009.201863] [3: kworker/u16:29:32553] hub 1-0:1.0: enabling power on all
ports
<6>[10009.205995] [2: kworker/u16:21:32544] exynos-pcie 10ee0000.pcie0: D state
: 0, 61cb00
<6>[10009.218260] [2: kworker/u16:21:32544] exynos-pcie 10ee0000.pcie0: exynos_
pcie_reset: Link up : 0x03690d11
<6>[10009.218493] [2: kworker/u16:21:32544] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, end of poweron, pcie state: 3
<6>[10009.229180] [2: kworker/u16:21:32544] mhi 0000:01:00.0: [debug] pmcsr reg
: 8 dev->current_state : 3
<6>[10009.229357] [2: kworker/u16:21:32544] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[10009.229369] [2: kworker/u16:21:32544] exynos-pcie 10ee0000.pcie0: Recover
y for the link of RC0
<6>[10009.229379] [2: kworker/u16:21:32544] exynos-pcie 10ee0000.pcie0: Recover
config space of RC0 and its EP
<6>[10009.229389] [2: kworker/u16:21:32544] exynos-pcie 10ee0000.pcie0: Recover
RC0
<6>[10009.229417] [2: kworker/u16:21:32544] exynos-pcie 10ee0000.pcie0: Recover
EP of RC0
<6>[10009.229804] [2: kworker/u16:21:32544] exynos-pcie 10ee0000.pcie0: Refresh
ing the saved config space in PCI framework for RC0 and its EP
<7>[10009.232340] [3: kworker/u16:29:32553] s5p-ehci 15510000.usb: GetStatus po
rt:2 status 001803 0 ACK POWER sig=j CSC CONNECT
<7>[10009.232353] [3: kworker/u16:29:32553] hub 1-0:1.0: port 2: status 0501 ch
ange 0001
<7>[10009.232428] [0: kworker/u16:22:32545] usb 1-2: finish reset-resume
<6>[10009.235054] [2: kworker/u16:21:32544] [mhi_turn_on_pcie_link] Exited...
<6>[10009.235067] [2: kworker/u16:21:32544] [mhi_initiate_m0] Setting M0 ...
<6>[10009.235215] [2: kworker/u16:21:32544] [mhi_initiate_m0] Exited...
<6>[10009.239465] [0: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 5 link 1, ring type 2, index 0 db 0x5fa263e0
<6>[10009.239479] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10009.239511] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[10009.239523] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[10009.239534] [1:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[10009.240026] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[10009.240034] [2: kworker/u16:21:32544] [mhi_resume] Wait complete state: 2
<4>[10009.252072] [0: system_server: 4318] ufs_get_device_info: UNIQUE NUMBER
= 02157df271b5cb31 , LT: 0x22
<6>[10009.255775] [0: system_server: 4318] exynos-ufs 15570000.ufs: Power mode
change(0): M(1)G(2)L(2)HS-series(2)
<4>[10009.256104] [0: system_server: 4318] hall_resume start
<4>[10009.256116] [0: system_server: 4318] [keys] hall_resume flip_status : 1
(open)
<4>[10009.256130] [0: system_server: 4318] certify_hall_resume start
<4>[10009.256139] [0: system_server: 4318] [keys] certify_hall_resume certify_
status : 0 (detach)
<6>[10009.256157] [0: system_server: 4318] wake disabled for irq 577
<6>[10009.256167] [0: system_server: 4318] wake disabled for irq 580
<6>[10009.256302] [0:
kworker/0:0:13589] [MAX98505_DEBUG] max98505_resume: e
nter
<6>[10009.261891] [0: system_server: 4318] mst_ldo_device_resume
<6>[10009.261931] [0: system_server: 4318] MST_LDO_DRV]]] resume
<6>[10009.261937] [0: system_server: 4318] MST_LDO_DRV]]] resume success after

smc : 122f122
<6>[10009.262041] [0: system_server: 4318] [SSP] ssp_resume:
<6>[10009.268237] [1: system_server: 4318] [SSP] ssp_send_cmd: command 0xd3 0
<3>[10009.268268] [1: system_server: 4318] vfsspi_wakeup_daemon send signal fa
iled by wakeup(0)
<6>[10009.268300] [1: system_server: 4318] vfsspi_regulator_onoff: ocp on, smc
ret = 0
<6>[10009.271365] [1: system_server: 4318] vfsspi_regulator_onoff: on
<6>[10009.271381] [1: system_server: 4318] vfsspi_pm_resume
<6>[10009.271434] [1: system_server: 4318] wake disabled for irq 4
<6>[10009.271469] [1: system_server: 4318] [VIB] max77843_haptic_resume
<2>[10009.271484] [1: system_server: 4318] Si47xx_resume: device not supported
<6>[10009.271504] [1: system_server: 4318] wake disabled for irq 7
<6>[10009.271713] [0:irq/7-sec-pmic-: 794] s2m-rtc s2m-rtc: s2m_rtc_alarm_irq:
irq(550)
<6>[10009.271723] [1: system_server: 4318] max86900_pm_resume
<6>[10009.273622] [1: system_server: 4318] s2m_rtc_update: RTC_UPDATE_REGISTER
check : 0x00
<6>[10009.273763] [1: system_server: 4318] s2m-rtc s2m-rtc: s2m_rtc_read_time:
2016-11-17 16:20:28(0x10)PM
<6>[10009.275199] [0:
kworker/0:2:31050] s2m_rtc_update: RTC_UPDATE_REGISTER
check : 0x00
<6>[10009.275443] [0:
kworker/0:2:31050] s2m-rtc s2m-rtc: s2m_rtc_read_time:
2016-11-17 16:20:28(0x10)PM
<6>[10009.278430] [1: system_server: 4318] exynos-pcie 15660000.pcie1: exynos_
pcie_poweron, start of poweron, pcie state: 0
<7>[10009.285869] [1: kworker/u16:22:32545] s5p-ehci 15510000.usb: port 2 reset
complete, port enabled
<7>[10009.285897] [1: kworker/u16:22:32545] s5p-ehci 15510000.usb: GetStatus po
rt:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
<6>[10009.299129] [2: kworker/u16:22:32545] usb 1-2: reset high-speed USB devic
e number 2 using s5p-ehci
<6>[10009.299280] [1: system_server: 4318] exynos-pcie 15660000.pcie1: D state
: 0, 242500
<6>[10009.300558] [1: system_server: 4318] exynos-pcie 15660000.pcie1: exynos_
pcie_reset: Link up : 0x03d15111
<6>[10009.300873] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL: 2010
<6>[10009.300888] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL: 42
<6>[10009.300898] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL: 0
<6>[10009.300914] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_RTCT
L: 0
<6>[10009.300929] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL2: 400
<6>[10009.300945] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL2: 1
<6>[10009.300955] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL2: 0
<6>[10009.300979] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x3c (was 0x1ff, writing 0x101ed)
<6>[10009.301002] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x38 (was 0x0, writing 0x0)
<6>[10009.301018] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x34 (was 0x40, writing 0x40)
<6>[10009.301035] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x30 (was 0x0, writing 0x0)
<6>[10009.301052] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x2c (was 0x0, writing 0x0)

<6>[10009.301068] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co


nfig space at offset 0x28 (was 0x0, writing 0x0)
<6>[10009.301084] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x24 (was 0x0, writing 0x0)
<6>[10009.301102] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x20 (was 0x1ff01c00, writing 0x1ff01c00)
<6>[10009.301118] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x1c (was 0x0, writing 0x0)
<6>[10009.301136] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x18 (was 0x10100, writing 0x10100)
<6>[10009.301152] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x14 (was 0x0, writing 0x0)
<6>[10009.301301] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x10 (was 0x0, writing 0x0)
<6>[10009.301319] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0xc (was 0x10000, writing 0x10010)
<6>[10009.301341] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x8 (was 0x1, writing 0x6040001)
<6>[10009.301363] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x4 (was 0x100107, writing 0x100147)
<6>[10009.301386] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x0 (was 0xa575144d, writing 0xa575144d)
<6>[10009.301451] [1: system_server: 4318] exynos-pcie 15660000.pcie1: exynos_
pcie_poweron, end of poweron, pcie state: 3
<4>[10009.301469] [1: system_server: 4318] dhdpcie_resume_dev: Enter
<6>[10009.301599] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_DEVCTL:
2c10
<6>[10009.301703] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_LNKCTL:
142
<6>[10009.301713] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_SLTCTL:
0
<6>[10009.301723] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_RTCTL:
0
<6>[10009.301870] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_DEVCTL2
: 400
<6>[10009.301974] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_LNKCTL2
: 1
<6>[10009.301983] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_SLTCTL2
: 0
<6>[10009.302133] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x3c (was 0x100, writing 0x1ed)
<6>[10009.302354] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x38 (was 0x0, writing 0x0)
<6>[10009.302489] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x34 (was 0x48, writing 0x48)
<6>[10009.302593] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x30 (was 0x0, writing 0x0)
<6>[10009.302972] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x2c (was 0x77414e4, writing 0x77414e4)
<6>[10009.303076] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x28 (was 0x0, writing 0x0)
<6>[10009.303180] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x24 (was 0x0, writing 0x0)
<6>[10009.303285] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x20 (was 0x0, writing 0x0)
<6>[10009.303389] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x1c (was 0x0, writing 0x0)
<6>[10009.303494] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x18 (was 0x4, writing 0x1c400004)
<6>[10009.303735] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi

g space at offset 0x18 (writing 0x1c400004)


<6>[10009.303839] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x14 (was 0x0, writing 0x0)
<6>[10009.303943] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x10 (was 0x4, writing 0x1c200004)
<6>[10009.304141] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x10 (writing 0x1c200004)
<6>[10009.304245] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0xc (was 0x0, writing 0x10)
<6>[10009.304442] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x8 (was 0x2800003, writing 0x2800003)
<6>[10009.304546] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x4 (was 0x100000, writing 0x100146)
<6>[10009.304743] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x0 (was 0x43e914e4, writing 0x43e914e4)
<4>[10009.306239] [1: system_server: 4318] dhdpcie_send_mb_data: H2D_MB_DATA:
0x00000010
<4>[10009.306275] [1: system_server: 4318] dhdpcie_send_mb_data: send H2D_HOST
_D0_INFORM to dongle
<7>[10009.317026] [0: kworker/u16:22:32545] usb 1-2: USB quirks for this device
: 100
<6>[10009.321136] [0: kworker/u16:22:32545] [CHKRA:5]>
<6>[10009.321688] [0: system_server: 4318] PM: resume of devices complete afte
r 154.195 msecs
<6>[10009.322998] I[0: system_server: 4318] [NACB:5]<
<6>[10009.323010] I[0: system_server: 4318] notification_available_cb: set lpa
handling to false
<6>[10009.323043] I[0: system_server: 4318] [CHKRA:5]>
<7>[10009.327362] [0: system_server: 4318] PM: Finishing wakeup.
<7>[10009.328569] [2:
khubd: 742] hub 1-0:1.0: state 7 ports 2 chg 00
04 evt 0000
<6>[10009.328636] [2:
khubd: 742] hub 1-0:1.0: port 2, status 0503, c
hange 0000, 480 Mb/s
<4>[10009.327377] [3:onic.tuiservice: 659] Restarting tasks ...
t-base-tui module: ioctl 0x80047402 <6>[10009.331545] [3:onic.tuiservice: 659]
TUI_IO_WAITCMD
<3>[10009.331826] [2:
mdm_helper: 3355] esoc REQ enginer waiting on request
<4>[10009.332407] [0: system_server: 4318] done.
<6>[10009.333005] [0:
kworker/0:2:31050] exynos-dwc3 15400000.usb: dwc3_exyn
os_runtime_suspend
<6>[10009.334401] [0: thread_hotplug:19112] frequency info : 1200000, prev_cmd
1, exe_cmd 4
<6>[10009.334425] [0: thread_hotplug:19112] lcd is on : 0, low power mode = 0,
dm_hotplug disable = 0
<6>[10009.334438] [0: thread_hotplug:19112] cluster1 cores hotplug out : 0
<7>[10009.334938] [0:
kworker/0:0:13589] max77843_fg_write_temp: temperature
to (278, 0x1bcd)
<6>[10009.335504] [0:
kworker/0:0:13589] max77843_fg_check_qrtable: QRTABLE2
0_REG(0x1603), QRTABLE30_REG(0x1005)
<6>[10009.338774] [3: system_server: 4318] mdm_hsic_pm_notify_event: unblock r
equest
<6>[10009.338807] [3: system_server: 4318] request_active_lock_set
<6>[10009.339008] [3: system_server: 4318] PM: suspend exit 2016-11-17 16:20:2
8.680161354 UTC
<6>[10009.339077] [0:
kworker/0:0:13589] power_supply battery: power_supply_
changed
<6>[10009.339105] [0:
kworker/0:0:13589] Skip monitor work(7, Vnow:4079mV, T
bat:278)
<6>[10009.339228] [0:
kworker/0:0:13589] sec_bat_get_property cable type = 1
sleep_mode = 0

<6>[10009.339252] [0:

kworker/0:0:13589] sec_bat_get_property cable type = 1

<6>[10009.345146] [0:
healthd: 3346] sec_bat_get_property cable type = 1
sleep_mode = 0
<12>[10009.345607] [0:
healthd: 3346] healthd: battery l=98 v=4079 t=27.
8 h=2 st=3 c=0 o=1 ca=-256 ct=0 ps=0 chg= 2016-11-17 16:20:28.686718479 UTC
<12>[10009.345708] [0:
healthd: 3346] healthd: battery l=98 v=4079 t=27.
8 h=2 st=3 c=0 o=1 ca=-256 ct=0 ps=0 chg= 2016-11-17 16:20:28.686718479 UTC hv=0
sec=0 chg=
<14>[10009.345738] [0:
healthd: 3346] healthd-android: healthd_mode_andr
oid_battery_update
<14>[10009.345764] [0:
healthd: 3346] BatteryPropertiesRegistrar: notify
Listeners : start
<14>[10009.345791] [0:
healthd: 3346] IBatteryPropertiesListener : batte
ryPropertiesChanged!
<14>[10009.345791] [0:
healthd: 3346] : BatteryPropertiesRegistrar: noti
fyListeners : done
<6>[10009.355820] [3: kworker/u16:17:32538] mdm_hsic_rpm_check
<6>[10009.355848] [3: kworker/u16:17:32538] mdm_hsic_rpm_restart
<3>[10009.365571] [2:
hci_thread: 6674] [BT] set_wake_locked value = 1
<6>[10009.450725] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10009.450769] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[10009.450786] [0:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[10009.450807] [0:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[10009.451002] [0:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[10009.532423] [0: thread_hotplug:19112] frequency info : 1500000, prev_cmd
4, exe_cmd 0
<6>[10009.532443] [0: thread_hotplug:19112] lcd is on : 0, low power mode = 0,
dm_hotplug disable = 0
<6>[10009.532453] [0: thread_hotplug:19112] cluster1 cores hotplug out : 0
<4>[10009.532899] [5:
swapper/5:
0] CPU5: Booted secondary processor
<4>[10009.534320] [6:
swapper/6:
0] CPU6: Booted secondary processor
<4>[10009.535423] [7:
swapper/7:
0] CPU7: Booted secondary processor
<6>[10009.635696] [0: thread_hotplug:19112] frequency info : 1200000, prev_cmd
0, exe_cmd 4
<6>[10009.635721] [0: thread_hotplug:19112] lcd is on : 0, low power mode = 0,
dm_hotplug disable = 0
<6>[10009.635734] [0: thread_hotplug:19112] cluster1 cores hotplug out : 0
<6>[10009.685756] I[0:
Binder_B: 5860] [BT] update_host_wake_locked host_w
ake is deasserted. release wakelock in 1s
<6>[10009.735736] [0: thread_hotplug:19112] frequency info : 600000, prev_cmd 4
, exe_cmd 1
<6>[10009.735784] [0: thread_hotplug:19112] lcd is on : 0, low power mode = 0,
dm_hotplug disable = 0
<6>[10009.735810] [0: thread_hotplug:19112] cluster1 cores hotplug out : 0
<4>[10009.739850] [7:
migration/7: 43] IRQ155 no longer affine to CPU7
<5>[10009.741329] [0: thread_hotplug:19112] CPU7: shutdown
<4>[10009.744378] [6:
migration/6: 38] IRQ154 no longer affine to CPU6
<5>[10009.745002] [0: thread_hotplug:19112] CPU6: shutdown
<4>[10009.748273] [5:
migration/5: 33] IRQ153 no longer affine to CPU5
<5>[10009.748886] [0: thread_hotplug:19112] CPU5: shutdown
<4>[10009.751539] [4:
migration/4: 28] IRQ152 no longer affine to CPU4
<5>[10009.752149] [0: thread_hotplug:19112] CPU4: shutdown
<4>[10009.755748] [3:
migration/3: 23] IRQ151 no longer affine to CPU3
<5>[10009.758028] [0: thread_hotplug:19112] CPU3: shutdown

<6>[10009.832238] [1:
kworker/1:4:14113] MIF(418000): unset TMU_COLD: 612500
=> (set_volt: 575000, get_volt: 575000)
<6>[10009.833616] [1:
kworker/1:4:14113] DISP(100000): unset TMU_COLD: (set_
volt: 650000, get_volt: 650000)
<7>[10009.834473] [0:
kworker/0:0:13589] usb 1-2: usb auto-suspend, wakeup 1
<6>[10009.835278] [1:
kworker/1:4:14113] INT(100000): unset TMU_COLD: 687500
=> 650000
<6>[10009.835328] [1:
kworker/1:4:14113] tmu temperature state 1 to 0, cur_t
emp : 34
<7>[10009.845877] [0:
kworker/0:0:13589] hub 1-0:1.0: hub_suspend
<7>[10009.845953] [0:
kworker/0:0:13589] usb usb1: bus auto-suspend, wakeup
1
<7>[10009.846004] [0:
kworker/0:0:13589] s5p-ehci 15510000.usb: suspend root
hub
<3>[10009.847382] [0:
kworker/0:0:13589] s5p-ehci 15510000.usb: s5p_ehci_run
time_suspend
<6>[10009.859196] [0: thread_hotplug:19112] frequency info : 400000, prev_cmd 1
, exe_cmd 5
<6>[10009.859241] [0: thread_hotplug:19112] lcd is on : 0, low power mode = 1,
dm_hotplug disable = 0
<6>[10009.859278] [0: thread_hotplug:19112] cluster1 cores hotplug out : 0
<7>[10009.859366] [0:
kworker/0:0:13589] samsung-usb2phy 15530000.usb2phy: s
amsung_usb2phy_runtime_suspend
<6>[10009.859432] [0:
kworker/0:0:13589] request_active_lock_release
<6>[10009.859477] [0:
kworker/0:0:13589] s5p_ehci_runtime_suspend: usage=0,
child=0
<5>[10009.964761] [0: thread_hotplug:19112] CPU2: shutdown
<6>[10009.968437] [0: thread_hotplug:19112] MobiCore mcd: <- core_num=0x0000000
0, active_cpu=0x00000001
<6>[10009.968747] [1:
mc_fastcall: 1747] MobiCore mcd: CoreSwap ok 1 -> 0
<5>[10009.973606] [0: thread_hotplug:19112] CPU1: shutdown
<6>[10009.976400] [0: thread_hotplug:19112] frequency info : 400000, prev_cmd 5
, exe_cmd 1
<6>[10009.976455] [0: thread_hotplug:19112] lcd is on : 0, low power mode = 1,
dm_hotplug disable = 0
<6>[10009.976493] [0: thread_hotplug:19112] cluster1 cores hotplug out : 0
<3>[10010.385774] I[0:
swapper/0:
0] [BT] set_wake_locked value = 0
<6>[10010.452926] [0: kworker/u16:17:32538] [mhi_initiate_m3] Entered MHI state
4, Pending M0 0 Pending M3 0
<6>[10010.453012] [0: kworker/u16:17:32538] [mhi_initiate_m3] Triggering wake o
ut of M2
<6>[10010.463949] [0: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26400
<6>[10010.464032] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10010.464144] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[10010.464191] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[10010.464239] [0:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[10010.468525] [0: kworker/u16:17:32538] [mhi_initiate_m3] Cancelled M1 time
r, timer was not active
<6>[10010.468765] [0: kworker/u16:17:32538] [mhi_initiate_m3] Waiting for M3 co
mpletion.
<6>[10010.469063] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[10010.476557] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10010.476677] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 5
<6>[10010.476725] [0:MHI_STATE_THREA: 4605] [process_M3_transition] Processing

M3 state transition
<6>[10010.476811] [0: kworker/u16:17:32538] [mhi_initiate_m3] M3 completion rec
eived
<6>[10010.476877] [0: kworker/u16:17:32538] [mhi_turn_off_pcie_link] Entered...
<6>[10010.489279] [0: kworker/u16:17:32538] mhi 0000:01:00.0: [debug] pmcsr reg
: b dev->current_state : 0
<6>[10010.489462] [0: kworker/u16:17:32538] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[10010.489578] [0: kworker/u16:17:32538] exynos-pcie 10ee0000.pcie0: ack mes
sage is ok
<6>[10010.489624] [0: kworker/u16:17:32538] exynos-pcie 10ee0000.pcie0: receive
d Enter_L23_READY DLLP packet
<6>[10010.489681] [0: kworker/u16:17:32538] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[10010.489849] [0: kworker/u16:17:32538] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[10010.520175] [0: kworker/u16:17:32538] [mhi_turn_off_pcie_link] Exited...
<6>[10010.875843] [0: thread_hotplug:19112] frequency info : 1000000, prev_cmd
1, exe_cmd 4
<6>[10010.875876] [0: thread_hotplug:19112] lcd is on : 0, low power mode = 1,
dm_hotplug disable = 0
<6>[10010.875892] [0: thread_hotplug:19112] cluster1 cores hotplug out : 0
<4>[10010.876544] [1:
swapper/1:
0] CPU1: Booted secondary processor
<6>[10010.877900] [0: thread_hotplug:19112] MobiCore mcd: <- core_num=0x0000000
1, active_cpu=0x00000000
<6>[10010.878007] [0:
mc_fastcall: 1747] MobiCore mcd: CoreSwap ok 0 -> 1
<4>[10010.878706] [2:
swapper/2:
0] CPU2: Booted secondary processor
<4>[10010.880384] [3:
swapper/3:
0] CPU3: Booted secondary processor
<6>[10010.885927] [1: system_server: 4318] PM: suspend entry 2016-11-17 16:20:
30.227077176 UTC
<6>[10010.885957] [2: system_server: 4318] PM: Syncing filesystems ... done.
<7>[10010.894034] [2: system_server: 4318] PM: Preparing system for mem sleep
<6>[10010.894242] [0: system_server: 4318] exynos_dm_hotplug_notifier, 958 : d
ynamic_hotplug CMD_SLEEP_PREPARE
<6>[10010.894267] [0: system_server: 4318] nr_sleep_prepare_cpus : 4, tmp_nr_s
leep_prepare_cpus : 5
<4>[10010.895000] [4:
swapper/4:
0] CPU4: Booted secondary processor
<6>[10010.896901] [0: thread_hotplug:19112] stopped thread_hotplug
<6>[10010.904119] [0: system_server: 4318] MIF(635000): set TMU_COLD: 637500 =
> (set_volt: 675000, get_volt: 675000)
<6>[10010.904823] [0: system_server: 4318] DISP(100000): set TMU_COLD: 650000
=> (set_volt: 687500, get_volt: 687500)
<6>[10010.905596] [0: system_server: 4318] INT(100000): set TMU_COLD: 650000 =
> 687500
<6>[10010.906280] [0: system_server: 4318] tmu temperature state 0 to 1
<6>[10010.906438] [0: system_server: 4318] mdm_hsic_pm_notify_event: block req
uest
<3>[10010.909166] [0:
mdm_helper: 3355] esoc REQ engine released from wait
<4>[10010.908738] [2: system_server: 4318] Freezing user space processes ...
<6>[10010.911675] [2: system_server: 4318] last active wakeup source: eventpol
l
<4>[10010.911711] [2: system_server: 4318]
<3>[10010.911733] [2: system_server: 4318] Freezing of tasks aborted after 0.0
02 seconds
<3>[10010.912094] [1:
mdm_helper: 3355] esoc REQ enginer waiting on request
<4>[10010.911754] [0:onic.tuiservice: 659] Restarting tasks ...
t-base-tui module: ioctl 0x80047402 <6>[10010.913881] [0:onic.tuiservice: 659]
TUI_IO_WAITCMD
<4>[10010.914419] [2: system_server: 4318] done.
<6>[10010.914673] [0: thread_hotplug:19145] frequency info : 700000, prev_cmd 1

, exe_cmd 4
<6>[10010.914701] [0: thread_hotplug:19145]
dm_hotplug disable = 0
<6>[10010.914722] [0: thread_hotplug:19145]
<6>[10010.919687] [0: system_server: 4318]
equest
<6>[10010.919726] [0: system_server: 4318]
<6>[10010.919851] [1: system_server: 4318]
0.261004638 UTC
<6>[10010.939137] [3: kworker/u16:11:32455]
<7>[10010.939222] [3: kworker/u16:11:32455]
time_resume
<6>[10010.939263] [3: kworker/u16:11:32455]
<7>[10010.939316] [3: kworker/u16:11:32455]
amsung_usb2phy_runtime_resume
<6>[10010.939403] [3: kworker/u16:11:32455]
hild=0
<7>[10010.939461] [3: kworker/u16:11:32455]
<7>[10010.939508] [3: kworker/u16:11:32455]
hub
<7>[10010.939554] [3: kworker/u16:11:32455]
<7>[10010.962607] [0: kworker/u16:11:32455]
<7>[10010.962730] [0: kworker/u16:11:32455]
ange 0000
<7>[10010.962851] [0: kworker/u16:11:32455]
<7>[10010.962982] [2:
khubd: 742]
00 evt 0000
<6>[10010.965917] [0: kworker/u16:11:32455]
<6>[10010.966149] [0: kworker/u16:11:32455]
<6>[10011.383033] [1:
kworker/1:4:14113]
=> (set_volt: 575000, get_volt: 575000)
<6>[10011.384286] [1:
kworker/1:4:14113]
volt: 650000, get_volt: 650000)
<6>[10011.385472] [1:
kworker/1:4:14113]
=> 650000
<6>[10011.385519] [1:
kworker/1:4:14113]
emp : 34
<7>[10011.474997] [0:
kworker/0:0:13589]
<7>[10011.485791] [0:
kworker/0:0:13589]
<7>[10011.485876] [0:
kworker/0:0:13589]
1
<7>[10011.485928] [0:
kworker/0:0:13589]
hub
<3>[10011.487181] [0:
kworker/0:0:13589]
time_suspend
<7>[10011.499264] [0:
kworker/0:0:13589]
amsung_usb2phy_runtime_suspend
<6>[10011.499339] [0:
kworker/0:0:13589]
<6>[10011.499408] [0:
kworker/0:0:13589]
child=0
<6>[10011.499830] [2: system_server: 4318]
30.840975321 UTC
<6>[10011.499873] [2: system_server: 4318]
<7>[10011.524619] [2: system_server: 4318]
<6>[10011.524986] [3: system_server: 4318]
ynamic_hotplug CMD_SLEEP_PREPARE
<6>[10011.525035] [3: system_server: 4318]
leep_prepare_cpus : 5
<6>[10011.525131] [0: thread_hotplug:19145]
<6>[10011.535767] [0: system_server: 4318]

lcd is on : 0, low power mode = 0,


cluster1 cores hotplug out : 0
mdm_hsic_pm_notify_event: unblock r
request_active_lock_set
PM: suspend exit 2016-11-17 16:20:3
mdm_hsic_rpm_check
s5p-ehci 15510000.usb: s5p_ehci_run
request_active_lock_set
samsung-usb2phy 15530000.usb2phy: s
s5p_ehci_runtime_resume: usage=1, c
usb usb1: usb auto-resume
s5p-ehci 15510000.usb: resume root
s5p-ehci 15510000.usb: LRESET 0
hub 1-0:1.0: hub_resume
hub 1-0:1.0: port 2: status 0503 ch
usb 1-2: finish resume
hub 1-0:1.0: state 7 ports 2 chg 00
[CHKRA:5]>
mdm_hsic_rpm_restart
MIF(418000): unset TMU_COLD: 612500
DISP(100000): unset TMU_COLD: (set_
INT(100000): unset TMU_COLD: 687500
tmu temperature state 1 to 0, cur_t
usb 1-2: usb auto-suspend, wakeup 1
hub 1-0:1.0: hub_suspend
usb usb1: bus auto-suspend, wakeup
s5p-ehci 15510000.usb: suspend root
s5p-ehci 15510000.usb: s5p_ehci_run
samsung-usb2phy 15530000.usb2phy: s
request_active_lock_release
s5p_ehci_runtime_suspend: usage=0,
PM: suspend entry 2016-11-17 16:20:
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
exynos_dm_hotplug_notifier, 958 : d
nr_sleep_prepare_cpus : 4, tmp_nr_s
stopped thread_hotplug
MIF(418000): set TMU_COLD: 575000 =

> (set_volt: 612500, get_volt: 612500)


<6>[10011.536712] [0: system_server: 4318]
=> (set_volt: 687500, get_volt: 687500)
<6>[10011.537811] [0: system_server: 4318]
> 687500
<6>[10011.537858] [0: system_server: 4318]
<6>[10011.537911] [0: system_server: 4318]
uest
<3>[10011.539315] [1:
mdm_helper: 3355]
<4>[10011.538641] [0: system_server: 4318]
elapsed 0.008 seconds) done.
<4>[10011.547488] [0: system_server: 4318]
... (elapsed 0.009 seconds) done.
<7>[10011.556687] [0: system_server: 4318]
<4>[10011.556729] [0: system_server: 4318]
le_suspend to debug)
<6>[10011.558926] [0: system_server: 4318]
os_runtime_resume
<6>[10011.561480] [3: kworker/u16:11:32455]
<6>[10011.561525] [3: kworker/u16:11:32455]
MHI state 5
<4>[10011.561561] [0: system_server: 4318]
0x00000001
<6>[10011.561589] [3: kworker/u16:11:32455]
5, Pending M0 0 Pending M3 0
<6>[10011.561623] [3: kworker/u16:11:32455]
state 0.
<4>[10011.566248] [0: system_server: 4318]
_D3_INFORM to dongle
<4>[10011.568260] I[0:
swapper/0:
0]
<4>[10011.568294] I[0:
swapper/0:
0]
Received D3 ACK
<4>[10011.568704] [0: system_server: 4318]
0x00000008
<4>[10011.569280] [0: system_server: 4318]
_D0_INFORM_IN_USE to dongle
<4>[10011.569645] [0: system_server: 4318]
<6>[10011.570078] [0: system_server: 4318]
43e914e4
<6>[10011.570281] [0: system_server: 4318]
100146
<6>[10011.570492] [0: system_server: 4318]
2800003
<6>[10011.570701] [0: system_server: 4318]
10
<6>[10011.570911] [0: system_server: 4318]
1c200004
<6>[10011.571121] [0: system_server: 4318]
0
<6>[10011.571330] [0: system_server: 4318]
1c400004
<6>[10011.571542] [0: system_server: 4318]
0
<6>[10011.571751] [0: system_server: 4318]
0
<6>[10011.571959] [0: system_server: 4318]
0
<6>[10011.572172] [0: system_server: 4318]
0
<6>[10011.572419] [0: system_server: 4318]

DISP(100000): set TMU_COLD: 650000


INT(100000): set TMU_COLD: 650000 =
tmu temperature state 0 to 1
mdm_hsic_pm_notify_event: block req
esoc REQ engine released from wait
Freezing user space processes ... (
Freezing remaining freezable tasks
PM: Entering mem sleep
Suspending console(s) (use no_conso
exynos-dwc3 15400000.usb: dwc3_exyn
[mhi_suspend] [mhi_suspend]
[mhi_suspend] Entered, sys state 2,
dhdpcie_send_mb_data: H2D_MB_DATA:
[mhi_initiate_m3] Entered MHI state
[mhi_initiate_m3] MHI state 5, link
dhdpcie_send_mb_data: send H2D_HOST
D2H_MB_DATA: 0x00000001
dhdpcie_handle_mb_data D2H_MB_DATA:
dhdpcie_send_mb_data: H2D_MB_DATA:
dhdpcie_send_mb_data: send H2D_HOST
dhdpcie_suspend_dev: Enter
pcieh 0001:01:00.0: reg offset: 0:
pcieh 0001:01:00.0: reg offset: 4:
pcieh 0001:01:00.0: reg offset: 8:
pcieh 0001:01:00.0: reg offset: 12:
pcieh 0001:01:00.0: reg offset: 16:
pcieh 0001:01:00.0: reg offset: 20:
pcieh 0001:01:00.0: reg offset: 24:
pcieh 0001:01:00.0: reg offset: 28:
pcieh 0001:01:00.0: reg offset: 32:
pcieh 0001:01:00.0: reg offset: 36:
pcieh 0001:01:00.0: reg offset: 40:
pcieh 0001:01:00.0: reg offset: 44:

77414e4
<6>[10011.572589] [0: system_server:
0
<6>[10011.572799] [0: system_server:
48
<6>[10011.573009] [0: system_server:
0
<6>[10011.573221] [0: system_server:
1ed
<6>[10011.573429] [0: system_server:
2c10
<6>[10011.573639] [0: system_server:
142
<6>[10011.573667] [0: system_server:
0
<6>[10011.573693] [0: system_server:
0
<6>[10011.573848] [0: system_server:
: 400
<6>[10011.574056] [0: system_server:
: 1
<6>[10011.574083] [0: system_server:
: 0
<6>[10011.576779] [0: system_server:
device_vendor_id reg : 43e914e4
<6>[10011.576985] [0: system_server:
PMCSR reg value: 4108
<6>[10011.577196] [0: system_server:
PMCSR reg value: 410b
<6>[10011.577370] [0: system_server:
device_vendor_id reg : 43e914e4
<6>[10011.589439] [1: system_server:
eg : 410b dev->current_state : 0
<6>[10011.589613] [1: system_server:
vendor_id reg : 43e914e4
<6>[10011.589675] [1: system_server:
0: a575144d
<6>[10011.589711] [1: system_server:
4: 100147
<6>[10011.589746] [1: system_server:
8: 6040001
<6>[10011.589910] [1: system_server:
12: 10010
<6>[10011.589945] [1: system_server:
16: 0
<6>[10011.589980] [1: system_server:
20: 0
<6>[10011.590015] [1: system_server:
24: 10100
<6>[10011.590049] [1: system_server:
28: 0
<6>[10011.590084] [1: system_server:
32: 1ff01c00
<6>[10011.590249] [1: system_server:
36: 0
<6>[10011.590284] [1: system_server:
40: 0
<6>[10011.590318] [1: system_server:
44: 0
<6>[10011.590353] [1: system_server:

4318] pcieh 0001:01:00.0: reg offset: 48:


4318] pcieh 0001:01:00.0: reg offset: 52:
4318] pcieh 0001:01:00.0: reg offset: 56:
4318] pcieh 0001:01:00.0: reg offset: 60:
4318] pcieh 0001:01:00.0: PCI_EXP_DEVCTL:
4318] pcieh 0001:01:00.0: PCI_EXP_LNKCTL:
4318] pcieh 0001:01:00.0: PCI_EXP_SLTCTL:
4318] pcieh 0001:01:00.0: PCI_EXP_RTCTL:
4318] pcieh 0001:01:00.0: PCI_EXP_DEVCTL2
4318] pcieh 0001:01:00.0: PCI_EXP_LNKCTL2
4318] pcieh 0001:01:00.0: PCI_EXP_SLTCTL2
4318] pcieh 0001:01:00.0: [debug] step 1,
4318] pcieh 0001:01:00.0: [debug] step 2,
4318] pcieh 0001:01:00.0: [debug] step 3,
4318] pcieh 0001:01:00.0: [debug] step 4,
4318] pcieh 0001:01:00.0: [debug] pmcsr r
4318] pcieh 0001:01:00.0: [debug] device_
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:

48: 0
<6>[10011.590387] [1: system_server: 4318] pcieport 0001:00:00.0: reg offset:
52: 40
<6>[10011.590422] [1: system_server: 4318] pcieport 0001:00:00.0: reg offset:
56: 0
<6>[10011.590588] [1: system_server: 4318] pcieport 0001:00:00.0: reg offset:
60: 101ed
<6>[10011.590623] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL: 2010
<6>[10011.590658] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL: 42
<6>[10011.590686] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL: 0
<6>[10011.590720] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_RTCT
L: 0
<6>[10011.590754] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL2: 400
<6>[10011.590925] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL2: 1
<6>[10011.590953] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL2: 0
<6>[10011.591128] [1: system_server: 4318] exynos-pcie 15660000.pcie1: ack mes
sage is ok
<6>[10011.591158] [1: system_server: 4318] exynos-pcie 15660000.pcie1: receive
d Enter_L23_READY DLLP packet
<6>[10011.591198] [1: system_server: 4318] exynos-pcie 15660000.pcie1: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[10011.591363] [1: system_server: 4318] exynos-pcie 15660000.pcie1: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[10011.596446] [0: system_server: 4318] voltage(793750) + volt_offset(37500
) is bigger than max_volt(793750)
<6>[10011.596501] [0: system_server: 4318] voltage(793750) + volt_offset(37500
) is bigger than max_volt(793750)
<6>[10011.597646] [0: system_server: 4318] DEVFREQ(MIF): suspend voltage(79375
0 793750)
<6>[10011.600444] [0: system_server: 4318] s2m_rtc_update: RTC_UPDATE_REGISTER
check : 0x00
<6>[10011.600646] [0: system_server: 4318] s2m-rtc s2m-rtc: s2m_rtc_read_time:
2016-11-17 16:20:30(0x10)PM
<5>[10011.601054] [0: system_server: 4318] sd 0:0:0:0: [sda] Synchronizing SCS
I cache
<6>[10011.606540] [0: system_server: 4318] s2m_rtc_update: RTC_UPDATE_REGISTER
check : 0x00
<6>[10011.606737] [0: system_server: 4318] s2m-rtc s2m-rtc: s2m_rtc_read_time:
2016-11-17 16:20:30(0x10)PM
<6>[10011.608013] [0: system_server: 4318] s2m_rtc_update: RTC_UPDATE_REGISTER
check : 0x00
<6>[10011.608201] [0: system_server: 4318] s2m-rtc s2m-rtc: s2m_rtc_read_time:
2016-11-17 16:20:30(0x10)PM
<6>[10011.608243] [0: system_server: 4318] s2m-rtc s2m-rtc: s2m_rtc_set_alarm:
2016-11-17 16:20:37(0x10)PM
<6>[10011.609624] [0: system_server: 4318] s2m_rtc_update: RTC_UPDATE_REGISTER
check : 0x00
<6>[10011.611000] [0: system_server: 4318] s2m_rtc_update: RTC_UPDATE_REGISTER
check : 0x00
<6>[10011.611610] [0: system_server: 4318] max86900_pm_suspend
<6>[10011.611986] [0: system_server: 4318] wake enabled for irq 7
<2>[10011.612143] [0: system_server: 4318] --------Si47xx i2c driver Si47xx_su
spend called
<2>[10011.612167] [0: system_server: 4318] Si47xx_suspend: device not supporte

d
<6>[10011.612219] [0: system_server: 4318] [VIB] max77843_haptic_suspend
<6>[10011.612247] [0: system_server: 4318] [VIB] max77843_haptic_i2c 0
<6>[10011.613445] [0: system_server: 4318] wake enabled for irq 4
<6>[10011.613625] [0: system_server: 4318] vfsspi_regulator_onoff: ocp off, sm
c ret = 0
<6>[10011.613648] [0: system_server: 4318] vfsspi_regulator_onoff: off
<6>[10011.613685] [0: system_server: 4318] vfsspi_pm_suspend
<6>[10011.613758] [0: system_server: 4318] [SSP] ssp_suspend:
<6>[10011.620428] [0: system_server: 4318] [SSP] ssp_send_cmd: command 0xd4 0
<6>[10011.620720] [0: system_server: 4318] mst_ldo_device_suspend
<6>[10011.620793] [0: system_server: 4318] MST_LDO_DRV]]] suspend
<6>[10011.620810] [0: system_server: 4318] MST_LDO_DRV]]] suspend success afte
r smc : 122f122
<6>[10011.659900] [0: system_server: 4318] [MAX98505_DEBUG] max98505_suspend:
enter
<6>[10011.660033] [0: system_server: 4318] pacific-audio sound.34: pacific_sus
pend_post : set AIF1 port slave
<6>[10011.660125] [0: system_server: 4318] wake enabled for irq 577
<6>[10011.660152] [0: system_server: 4318] wake enabled for irq 580
<4>[10011.660194] [0: system_server: 4318] certify_hall_suspend start
<4>[10011.660222] [0: system_server: 4318] [keys] certify_hall_suspend certify
_status : 0 (detach)
<4>[10011.660256] [0: system_server: 4318] hall_suspend start
<4>[10011.660281] [0: system_server: 4318] [keys] hall_suspend flip_status : 1
(open)
<6>[10011.675105] [0: system_server: 4318] [MIF] usb_phy_prepare_shutdown
<6>[10011.675137] [0: system_server: 4318] dev rdy val = 1
<6>[10011.675159] [0: system_server: 4318] set_host_stat:set host port power s
tatus to [0]
<6>[10011.705145] [0: system_server: 4318] wait_dev_pwr_stat:[PWR OFF]...
<6>[10011.713977] I[0: system_server: 4318] mdm_device_ready_irq_handler, irq:
host ready val : 00000000
<6>[10011.714003] I[0: system_server: 4318] mdm_device_ready_irq_handler, irq:
dev ready val : 00000000
<6>[10011.733685] [1: system_server: 4318] done
<7>[10011.733751] [1: system_server: 4318] samsung-usb2phy 15530000.usb2phy: s
amsung_usb2phy_shutdown: End of setting for shutdown
<6>[10011.734080] [1: system_server: 4318] spi suspend is handled in device su
spend, dma mode = 0, bus_num = 3
<6>[10011.734117] [1: system_server: 4318] spi suspend is handled in device su
spend, dma mode = 0, bus_num = 1
<6>[10011.734253] [1: system_server: 4318] 3s3c24xx_serial_shutdown: port=4 res
et
<6>[10011.735577] [1: system_server: 4318] PM: suspend of devices complete aft
er 174.882 msecs
<6>[10011.735603] [1: system_server: 4318] ---Enabled regulators--<6>[10011.735704] [1: system_server: 4318] LDO1: 1200000uV, 0xffffffea mode, n
ull
<6>[10011.737902] [0: system_server: 4318] VDDIO_1.8V_COMP: 1800000uV, 0xfffff
fea mode, null
<6>[10011.738880] [0: system_server: 4318] VDDD_RET_1.0V_COMP: 700000uV, 0xfff
fffea mode, null
<6>[10011.740835] [0: system_server: 4318] VDD20_1P8_AP: 1800000uV, 0xffffffea
mode, null
<6>[10011.741504] [0: system_server: 4318] VCC_1.8V_CODEC_PMIC: 1800000uV, 0xf
fffffea mode, spi0.0-DBVDD1, spi0.0-AVDD, regulator.47-SUPPLY
<6>[10011.743302] [0: system_server: 4318] regulator-dummy: -22uV, 0xffffffea
mode, null
<6>[10011.743330] [0: system_server: 4318] Always On regulator count :10 [VDD2

2_1P1_2MIC][vdd_ldo8][vdd_mldo][vdd_lldo][vdd_disp_cam0][vdd_int][vdd_apollo][vd
d_atlas][vdd_mif][safeout1_range]
<6>[10011.743353] [0: system_server: 4318] ---Enabled regulator count: 16--<6>[10011.745688] [0: system_server: 4318] PM: late suspend of devices complet
e after 2.301 msecs
<6>[10011.746781] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
0: ffffffff
<6>[10011.746813] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
4: ffffffff
<6>[10011.746842] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
8: ffffffff
<6>[10011.746871] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
12: ffffffff
<6>[10011.746900] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
16: ffffffff
<6>[10011.746929] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
20: ffffffff
<6>[10011.746958] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
24: ffffffff
<6>[10011.746986] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
28: ffffffff
<6>[10011.747015] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
32: ffffffff
<6>[10011.747043] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
36: ffffffff
<6>[10011.747071] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
40: ffffffff
<6>[10011.747100] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
44: ffffffff
<6>[10011.747128] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
48: ffffffff
<6>[10011.747157] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
52: ffffffff
<6>[10011.747185] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
56: ffffffff
<6>[10011.747214] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
60: ffffffff
<6>[10011.747243] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL: 0
<6>[10011.747271] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL: 0
<6>[10011.747298] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL: 0
<6>[10011.747326] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_RTCT
L: 0
<6>[10011.747353] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL2: 0
<6>[10011.747381] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL2: 0
<6>[10011.747408] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL2: 0
<6>[10011.748646] [0: system_server: 4318] exynos-pcie 15660000.pcie1: RC1 alr
eady off
<6>[10011.748680] [0: system_server: 4318] exynos-pcie 10ee0000.pcie0: RC0 alr
eady off
<6>[10011.748872] [0: system_server: 4318] spi suspend is handled in suspend_n
oirq, dma mode = 1, bus_num = 4
<6>[10011.748910] [0: system_server: 4318] spi suspend is handled in suspend_n
oirq, dma mode = 1, bus_num = 0
<6>[10011.749259] [0: system_server: 4318] PM: noirq suspend of devices comple

te after 3.536 msecs


<4>[10011.749285] [0: system_server: 4318] Disabling non-boot CPUs ...
<6>[10011.749678] [1: system_server: 4318] MobiCore mcd: <- core_num=0x0000000
0, active_cpu=0x00000001
<6>[10011.749773] [1:
mc_fastcall: 1747] MobiCore mcd: CoreSwap ok 1 -> 0
<5>[10011.752691] [2: system_server: 4318] CPU1: shutdown
<5>[10011.756629] [3: system_server: 4318] CPU2: shutdown
<5>[10011.760589] [0: system_server: 4318] CPU3: shutdown
<5>[10011.763556] [0: system_server: 4318] CPU4: shutdown
<6>[10011.764391] [0: system_server: 4318] [MIF] 1552000Khz
<6>[10011.764391] [0: system_server: 4318] WAKEUP_STAT: 0x80000001
<6>[10011.764391] [0: system_server: 4318] EINT_PEND: 0x00, 0x40 0x00, 0x80
<6>[10011.764391] [0: system_server: 4318] Resume caused by IRQ 7, sec-pmic-ir
q
<6>[10011.764391] [0: system_server: 4318] Suspended for 0.000 seconds
<6>[10011.764541] [0: system_server: 4318] Enabling non-boot CPUs ...
<4>[10011.764709] [1:
swapper/1:
0] CPU1: Booted secondary processor
<6>[10011.765364] [0: system_server: 4318] MobiCore mcd: <- core_num=0x0000000
1, active_cpu=0x00000000
<6>[10011.765412] [0:
mc_fastcall: 1747] MobiCore mcd: CoreSwap ok 0 -> 1
<6>[10011.765448] [0: system_server: 4318] CPU1 is up
<4>[10011.765585] [2:
swapper/2:
0] CPU2: Booted secondary processor
<6>[10011.766218] [0: system_server: 4318] CPU2 is up
<4>[10011.766369] [3:
swapper/3:
0] CPU3: Booted secondary processor
<6>[10011.766927] [0: system_server: 4318] CPU3 is up
<4>[10011.767155] [4:
swapper/4:
0] CPU4: Booted secondary processor
<6>[10011.767864] [0: system_server: 4318] CPU4 is up
<6>[10011.768067] [0: system_server: 4318] spi resume is handled in resume_noi
rq, dma mode = 1, bus_num = 0
<6>[10011.768124] [0: system_server: 4318] spi resume is handled in resume_noi
rq, dma mode = 1, bus_num = 4
<6>[10011.782309] [1: system_server: 4318] pcieport 0001:00:00.0: [debug] pmcs
r reg : ffff dev->current_state : 3
<6>[10011.782322] [1: system_server: 4318] pcieport 0001:00:00.0: [debug] devi
ce_vendor_id reg : ffffffff
<6>[10011.782334] [1: system_server: 4318] pcieport 0001:00:00.0: Refused to c
hange power state, currently in D3, PCI_PM_CTRL=ffff
<6>[10011.782347] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL: 0
<6>[10011.782357] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL: 0
<6>[10011.782366] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL: 0
<6>[10011.782376] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_RTCT
L: 0
<6>[10011.782386] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL2: 0
<6>[10011.782395] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL2: 0
<6>[10011.782404] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL2: 0
<6>[10011.782415] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x3c (was 0xffffffff, writing 0xffffffff)
<6>[10011.782427] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x38 (was 0xffffffff, writing 0xffffffff)
<6>[10011.782438] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x34 (was 0xffffffff, writing 0xffffffff)
<6>[10011.782449] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x30 (was 0xffffffff, writing 0xffffffff)
<6>[10011.782460] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co

nfig space at offset 0x2c (was 0xffffffff, writing 0xffffffff)


<6>[10011.782470] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x28 (was 0xffffffff, writing 0xffffffff)
<6>[10011.782481] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x24 (was 0xffffffff, writing 0xffffffff)
<6>[10011.782492] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x20 (was 0xffffffff, writing 0xffffffff)
<6>[10011.782503] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x1c (was 0xffffffff, writing 0xffffffff)
<6>[10011.782513] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x18 (was 0xffffffff, writing 0xffffffff)
<6>[10011.782524] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x14 (was 0xffffffff, writing 0xffffffff)
<6>[10011.782535] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x10 (was 0xffffffff, writing 0xffffffff)
<6>[10011.782546] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0xc (was 0xffffffff, writing 0xffffffff)
<6>[10011.782556] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x8 (was 0xffffffff, writing 0xffffffff)
<6>[10011.782567] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x4 (was 0xffffffff, writing 0xffffffff)
<6>[10011.782578] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x0 (was 0xffffffff, writing 0xffffffff)
<6>[10011.782601] [1: system_server: 4318] pcieh 0001:01:00.0: [debug] step 1,
device_vendor_id reg : ffffffff
<6>[10011.782611] [1: system_server: 4318] pcieh 0001:01:00.0: [debug] step 2,
PMCSR reg value: ffff
<6>[10011.782621] [1: system_server: 4318] pcieh 0001:01:00.0: [debug] step 3,
PMCSR reg value: 0
<6>[10011.782630] [1: system_server: 4318] pcieh 0001:01:00.0: [debug] step 4,
device_vendor_id reg : ffffffff
<6>[10011.795613] [1: system_server: 4318] pcieh 0001:01:00.0: [debug] pmcsr r
eg : ffff dev->current_state : 3
<6>[10011.795623] [1: system_server: 4318] pcieh 0001:01:00.0: [debug] device_
vendor_id reg : ffffffff
<6>[10011.795634] [1: system_server: 4318] pcieh 0001:01:00.0: Refused to chan
ge power state, currently in D3, PCI_PM_CTRL=ffff
<6>[10011.795645] [1: system_server: 4318] exynos-pcie 15660000.pcie1: PCIE li
nk state is 0
<6>[10011.795655] [1: system_server: 4318] pcieh 0001:01:00.0: [debug] setp 5,
PMCSR reg value: ffff
<6>[10011.795665] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_DEVCTL:
2c10
<6>[10011.795674] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_LNKCTL:
142
<6>[10011.795683] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_SLTCTL:
0
<6>[10011.795692] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_RTCTL:
0
<6>[10011.795701] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_DEVCTL2
: 400
<6>[10011.795710] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_LNKCTL2
: 1
<6>[10011.795719] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_SLTCTL2
: 0
<6>[10011.795730] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x3c (was 0xffffffff, writing 0x1ed)
<6>[10011.795740] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x38 (was 0xffffffff, writing 0x0)
<6>[10011.795751] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi

g space at offset 0x34 (was 0xffffffff, writing 0x48)


<6>[10011.795762] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x30 (was 0xffffffff, writing 0x0)
<6>[10011.795773] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x2c (was 0xffffffff, writing 0x77414e4)
<6>[10011.795783] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x28 (was 0xffffffff, writing 0x0)
<6>[10011.795795] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x24 (was 0xffffffff, writing 0x0)
<6>[10011.825763] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x20 (was 0xffffffff, writing 0x0)
<6>[10011.855732] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x1c (was 0xffffffff, writing 0x0)
<6>[10011.885702] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x18 (was 0xffffffff, writing 0x1c400004)
<6>[10011.915671] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x14 (was 0xffffffff, writing 0x0)
<6>[10011.945640] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x10 (was 0xffffffff, writing 0x1c200004)
<6>[10011.975609] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0xc (was 0xffffffff, writing 0x10)
<6>[10011.975620] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x8 (was 0xffffffff, writing 0x2800003)
<6>[10011.975631] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x4 (was 0xffffffff, writing 0x100146)
<6>[10011.975642] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x0 (was 0xffffffff, writing 0x43e914e4)
<6>[10011.988951] [1: system_server: 4318] pcieport 0000:00:00.0: [debug] pmcs
r reg : ffff dev->current_state : 3
<6>[10011.988962] [1: system_server: 4318] pcieport 0000:00:00.0: [debug] devi
ce_vendor_id reg : ffffffff
<6>[10011.988973] [1: system_server: 4318] pcieport 0000:00:00.0: Refused to c
hange power state, currently in D3, PCI_PM_CTRL=ffff
<6>[10012.002275] [1: system_server: 4318] mhi 0000:01:00.0: [debug] pmcsr reg
: ffff dev->current_state : 3
<6>[10012.002286] [1: system_server: 4318] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : ffffffff
<6>[10012.002296] [1: system_server: 4318] mhi 0000:01:00.0: Refused to change
power state, currently in D3, PCI_PM_CTRL=ffff
<6>[10012.002416] [1: system_server: 4318] PM: noirq resume of devices complet
e after 234.538 msecs
<6>[10012.002862] [1: system_server: 4318] exynos-mailbox 11240000.mailbox: Lo
ading APM firmware ...
<6>[10012.003029] [1: system_server: 4318] OK
<6>[10012.004122] [1: system_server: 4318] PM: early resume of devices complet
e after 1.366 msecs
<6>[10012.004380] [0: kworker/u16:14:32535] [mhi_resume] [mhi_resume]
<6>[10012.004398] [0: kworker/u16:14:32535] [mhi_initiate_m0] Entered MHI state
5, Pending M0 0 Pending M3 0
<6>[10012.004413] [0: kworker/u16:14:32535] [mhi_initiate_m0] Waiting for M0 M1
or M3. Currently 5...
<6>[10012.004423] [0: kworker/u16:14:32535] [mhi_initiate_m0] Wait complete sta
te: 5
<6>[10012.004433] [0: kworker/u16:14:32535] [mhi_turn_on_pcie_link] Entered...
<6>[10012.004448] [0: kworker/u16:14:32535] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, start of poweron, pcie state: 0
<6>[10012.004605] [1: system_server: 4318] s3c2410_wdt: watchdog enabled
<6>[10012.008078] [1: system_server: 4318] spi resume is handled in device res
ume, dma mode = 0, bus_num = 1
<6>[10012.008113] [1: system_server: 4318] spi resume is handled in device res

ume, dma mode = 0, bus_num = 3


<7>[10012.008345] [1: system_server: 4318] samsung-usb2phy 15530000.usb2phy: C
an't configure specified phy mode
<7>[10012.008363] [1: system_server: 4318] samsung-usb2phy 15530000.usb2phy: e
nd of samsung_usb2phy_init
<7>[10012.008378] [1: system_server: 4318] samsung-usb2phy 15530000.usb2phy: s
amsung_usb2phy_runtime_resume
<4>[10012.008399] [1: system_server: 4318] usb usb1: root hub lost power or wa
s reset
<7>[10012.008422] [1: system_server: 4318] s5p-ehci 15510000.usb: reset comman
d 0080b02 park=3 ithresh=8 period=1024 Reset HALT
<6>[10012.008439] [1: system_server: 4318] dev rdy val = 0
<6>[10012.008447] [1: system_server: 4318] set_host_stat:set host port power s
tatus to [1]
<6>[10012.008458] [1: system_server: 4318] wait_dev_pwr_stat:[PWR ON]...
<6>[10012.029852] I[0:
swapper/0:
0] mdm_device_ready_irq_handler, irq:
host ready val : 00000001
<6>[10012.029861] I[0:
swapper/0:
0] mdm_device_ready_irq_handler, irq:
dev ready val : 00000001
<6>[10012.038419] [1: system_server: 4318] done
<7>[10012.038458] [3: kworker/u16:18:32540] usb usb1: usb resume
<7>[10012.038472] [3: kworker/u16:18:32540] s5p-ehci 15510000.usb: resume root
hub after power loss
<7>[10012.038484] [3: kworker/u16:18:32540] s5p-ehci 15510000.usb: LRESET 0
<7>[10012.038507] [3: kworker/u16:18:32540] hub 1-0:1.0: hub_reset_resume
<7>[10012.038517] [3: kworker/u16:18:32540] hub 1-0:1.0: enabling power on all
ports
<6>[10012.042629] [0: kworker/u16:14:32535] exynos-pcie 10ee0000.pcie0: D state
: 0, 36d600
<6>[10012.054938] [1: kworker/u16:14:32535] exynos-pcie 10ee0000.pcie0: exynos_
pcie_reset: Link up : 0x033f6d11
<6>[10012.055169] [1: kworker/u16:14:32535] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, end of poweron, pcie state: 3
<6>[10012.065821] [1: kworker/u16:14:32535] mhi 0000:01:00.0: [debug] pmcsr reg
: 8 dev->current_state : 3
<6>[10012.066001] [1: kworker/u16:14:32535] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[10012.066013] [1: kworker/u16:14:32535] exynos-pcie 10ee0000.pcie0: Recover
y for the link of RC0
<6>[10012.066023] [1: kworker/u16:14:32535] exynos-pcie 10ee0000.pcie0: Recover
config space of RC0 and its EP
<6>[10012.066033] [1: kworker/u16:14:32535] exynos-pcie 10ee0000.pcie0: Recover
RC0
<6>[10012.066060] [1: kworker/u16:14:32535] exynos-pcie 10ee0000.pcie0: Recover
EP of RC0
<6>[10012.066451] [1: kworker/u16:14:32535] exynos-pcie 10ee0000.pcie0: Refresh
ing the saved config space in PCI framework for RC0 and its EP
<7>[10012.068976] [3: kworker/u16:18:32540] s5p-ehci 15510000.usb: GetStatus po
rt:2 status 001803 0 ACK POWER sig=j CSC CONNECT
<7>[10012.068989] [3: kworker/u16:18:32540] hub 1-0:1.0: port 2: status 0501 ch
ange 0001
<7>[10012.069059] [3: kworker/u16:23:32546] usb 1-2: finish reset-resume
<6>[10012.071664] [1: kworker/u16:14:32535] [mhi_turn_on_pcie_link] Exited...
<6>[10012.071678] [1: kworker/u16:14:32535] [mhi_initiate_m0] Setting M0 ...
<6>[10012.071825] [1: kworker/u16:14:32535] [mhi_initiate_m0] Exited...
<6>[10012.076254] [0: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 5 link 1, ring type 2, index 0 db 0x5fa26420
<6>[10012.076269] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10012.076305] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni

ng to 2
<6>[10012.076315] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[10012.076326] [1:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[10012.076807] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[10012.076816] [2: kworker/u16:14:32535] [mhi_resume] Wait complete state: 2
<4>[10012.087396] [0: system_server: 4318] ufs_get_device_info: UNIQUE NUMBER
= 02157df271b5cb31 , LT: 0x22
<6>[10012.091105] [0: system_server: 4318] exynos-ufs 15570000.ufs: Power mode
change(0): M(1)G(2)L(2)HS-series(2)
<4>[10012.091447] [0: system_server: 4318] hall_resume start
<4>[10012.091459] [0: system_server: 4318] [keys] hall_resume flip_status : 1
(open)
<4>[10012.091473] [0: system_server: 4318] certify_hall_resume start
<4>[10012.091483] [0: system_server: 4318] [keys] certify_hall_resume certify_
status : 0 (detach)
<6>[10012.091500] [0: system_server: 4318] wake disabled for irq 577
<6>[10012.091510] [0: system_server: 4318] wake disabled for irq 580
<6>[10012.091638] [0:
kworker/0:0:13589] [MAX98505_DEBUG] max98505_resume: e
nter
<6>[10012.092371] [1: system_server: 4318] mst_ldo_device_resume
<6>[10012.092407] [1: system_server: 4318] MST_LDO_DRV]]] resume
<6>[10012.092413] [1: system_server: 4318] MST_LDO_DRV]]] resume success after
smc : 122f122
<6>[10012.097105] [3: system_server: 4318] [SSP] ssp_resume:
<6>[10012.103308] [3: system_server: 4318] [SSP] ssp_send_cmd: command 0xd3 0
<3>[10012.103338] [3: system_server: 4318] vfsspi_wakeup_daemon send signal fa
iled by wakeup(0)
<6>[10012.103369] [3: system_server: 4318] vfsspi_regulator_onoff: ocp on, smc
ret = 0
<6>[10012.106416] [3: system_server: 4318] vfsspi_regulator_onoff: on
<6>[10012.106432] [3: system_server: 4318] vfsspi_pm_resume
<6>[10012.106482] [3: system_server: 4318] wake disabled for irq 4
<6>[10012.106517] [3: system_server: 4318] [VIB] max77843_haptic_resume
<2>[10012.106533] [3: system_server: 4318] Si47xx_resume: device not supported
<6>[10012.106552] [3: system_server: 4318] wake disabled for irq 7
<6>[10012.106757] [0:irq/7-sec-pmic-: 794] s2m-rtc s2m-rtc: s2m_rtc_alarm_irq:
irq(550)
<6>[10012.106766] [3: system_server: 4318] max86900_pm_resume
<6>[10012.108613] [3: system_server: 4318] s2m_rtc_update: RTC_UPDATE_REGISTER
check : 0x00
<6>[10012.108750] [3: system_server: 4318] s2m-rtc s2m-rtc: s2m_rtc_read_time:
2016-11-17 16:20:37(0x10)PM
<6>[10012.110045] [0:
kworker/0:2:31050] s2m_rtc_update: RTC_UPDATE_REGISTER
check : 0x00
<6>[10012.110383] [0:
kworker/0:2:31050] s2m-rtc s2m-rtc: s2m_rtc_read_time:
2016-11-17 16:20:37(0x10)PM
<6>[10012.113538] [3: system_server: 4318] exynos-pcie 15660000.pcie1: exynos_
pcie_poweron, start of poweron, pcie state: 0
<7>[10012.122397] [3: kworker/u16:23:32546] s5p-ehci 15510000.usb: port 2 reset
complete, port enabled
<7>[10012.122425] [3: kworker/u16:23:32546] s5p-ehci 15510000.usb: GetStatus po
rt:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
<6>[10012.134382] [3: system_server: 4318] exynos-pcie 15660000.pcie1: D state
: 0, 9aba00
<6>[10012.135627] [3: system_server: 4318] exynos-pcie 15660000.pcie1: exynos_
pcie_reset: Link up : 0x03934111
<6>[10012.135768] [0: kworker/u16:23:32546] usb 1-2: reset high-speed USB devic
e number 2 using s5p-ehci
<6>[10012.135937] [3: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC

TL: 2010
<6>[10012.135952] [3: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL: 42
<6>[10012.135961] [3: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL: 0
<6>[10012.135977] [3: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_RTCT
L: 0
<6>[10012.135993] [3: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL2: 400
<6>[10012.136008] [3: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL2: 1
<6>[10012.136018] [3: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL2: 0
<6>[10012.136044] [3: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x3c (was 0x1ff, writing 0x101ed)
<6>[10012.136068] [3: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x38 (was 0x0, writing 0x0)
<6>[10012.136084] [3: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x34 (was 0x40, writing 0x40)
<6>[10012.136101] [3: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x30 (was 0x0, writing 0x0)
<6>[10012.136118] [3: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x2c (was 0x0, writing 0x0)
<6>[10012.136135] [3: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x28 (was 0x0, writing 0x0)
<6>[10012.136289] [3: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x24 (was 0x0, writing 0x0)
<6>[10012.136305] [3: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x20 (was 0x1ff01c00, writing 0x1ff01c00)
<6>[10012.136322] [3: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x1c (was 0x0, writing 0x0)
<6>[10012.136339] [3: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x18 (was 0x10100, writing 0x10100)
<6>[10012.136355] [3: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x14 (was 0x0, writing 0x0)
<6>[10012.136372] [3: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x10 (was 0x0, writing 0x0)
<6>[10012.136389] [3: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0xc (was 0x10000, writing 0x10010)
<6>[10012.136411] [3: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x8 (was 0x1, writing 0x6040001)
<6>[10012.136433] [3: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x4 (was 0x100107, writing 0x100147)
<6>[10012.136455] [3: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x0 (was 0xa575144d, writing 0xa575144d)
<6>[10012.136518] [3: system_server: 4318] exynos-pcie 15660000.pcie1: exynos_
pcie_poweron, end of poweron, pcie state: 3
<4>[10012.136534] [3: system_server: 4318] dhdpcie_resume_dev: Enter
<6>[10012.136931] [3: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_DEVCTL:
2c10
<6>[10012.137309] [3: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_LNKCTL:
142
<6>[10012.137319] [3: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_SLTCTL:
0
<6>[10012.137329] [3: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_RTCTL:
0
<6>[10012.137468] [3: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_DEVCTL2
: 400
<6>[10012.137571] [3: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_LNKCTL2
: 1

<6>[10012.137580] [3: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_SLTCTL2


: 0
<6>[10012.137723] [3: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x3c (was 0x100, writing 0x1ed)
<6>[10012.138202] [3: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x38 (was 0x0, writing 0x0)
<6>[10012.138307] [3: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x34 (was 0x48, writing 0x48)
<6>[10012.138411] [3: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x30 (was 0x0, writing 0x0)
<6>[10012.138516] [3: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x2c (was 0x77414e4, writing 0x77414e4)
<6>[10012.138895] [3: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x28 (was 0x0, writing 0x0)
<6>[10012.139027] [3: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x24 (was 0x0, writing 0x0)
<6>[10012.139132] [3: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x20 (was 0x0, writing 0x0)
<6>[10012.139237] [3: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x1c (was 0x0, writing 0x0)
<6>[10012.139341] [3: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x18 (was 0x4, writing 0x1c400004)
<6>[10012.139539] [3: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x18 (writing 0x1c400004)
<6>[10012.139643] [3: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x14 (was 0x0, writing 0x0)
<6>[10012.139747] [3: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x10 (was 0x4, writing 0x1c200004)
<6>[10012.140219] [3: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x10 (writing 0x1c200004)
<6>[10012.140324] [3: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0xc (was 0x0, writing 0x10)
<6>[10012.140521] [3: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x8 (was 0x2800003, writing 0x2800003)
<6>[10012.140626] [3: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x4 (was 0x100000, writing 0x100146)
<6>[10012.140824] [3: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x0 (was 0x43e914e4, writing 0x43e914e4)
<4>[10012.142282] [3: system_server: 4318] dhdpcie_send_mb_data: H2D_MB_DATA:
0x00000010
<4>[10012.142319] [3: system_server: 4318] dhdpcie_send_mb_data: send H2D_HOST
_D0_INFORM to dongle
<7>[10012.157054] [0: kworker/u16:23:32546] usb 1-2: USB quirks for this device
: 100
<6>[10012.161916] [0: kworker/u16:23:32546] [CHKRA:5]>
<6>[10012.162472] [1: system_server: 4318] PM: resume of devices complete afte
r 158.330 msecs
<6>[10012.163655] I[0:
swapper/0:
0] [NACB:5]<
<6>[10012.163665] I[0:
swapper/0:
0] notification_available_cb: set lpa
handling to false
<6>[10012.163700] I[0:
swapper/0:
0] [CHKRA:5]>
<7>[10012.166545] [0:
kworker/0:0:13589] max77843_fg_write_temp: temperature
to (279, 0x1be6)
<6>[10012.166973] [0:
kworker/0:0:13589] max77843_fg_check_qrtable: QRTABLE2
0_REG(0x1603), QRTABLE30_REG(0x1005)
<7>[10012.168002] [1: system_server: 4318] PM: Finishing wakeup.
<6>[10012.168452] [0:
kworker/0:0:13589] power_supply battery: power_supply_
changed
<6>[10012.168520] [0:
kworker/0:0:13589] Skip monitor work(16, Vnow:4102mV,
Tbat:279)

<6>[10012.168693] [0:
sleep_mode = 0
<6>[10012.168718] [0:

kworker/0:0:13589] sec_bat_get_property cable type = 1


kworker/0:0:13589] sec_bat_get_property cable type = 1

<7>[10012.169111] [2:
khubd: 742] hub 1-0:1.0: state 7 ports 2 chg 00
04 evt 0000
<6>[10012.169176] [2:
khubd: 742] hub 1-0:1.0: port 2, status 0503, c
hange 0000, 480 Mb/s
<6>[10012.171688] [0:
healthd: 3346] sec_bat_get_property cable type = 1
sleep_mode = 0
<3>[10012.172636] [1:
mdm_helper: 3355] esoc REQ enginer waiting on request
<12>[10012.175104] [0:
healthd: 3346] healthd: battery l=98 v=4102 t=27.
9 h=2 st=3 c=0 o=1 ca=-256 ct=0 ps=0 chg= 2016-11-17 16:20:37.678342520 UTC
<12>[10012.175207] [0:
healthd: 3346] healthd: battery l=98 v=4102 t=27.
9 h=2 st=3 c=0 o=1 ca=-256 ct=0 ps=0 chg= 2016-11-17 16:20:37.678342520 UTC hv=0
sec=0 chg=
<14>[10012.175236] [0:
healthd: 3346] healthd-android: healthd_mode_andr
oid_battery_update
<14>[10012.175262] [0:
healthd: 3346] BatteryPropertiesRegistrar: notify
Listeners : start
<4>[10012.168018] [0:
healthd: 3346] Restarting tasks ...
IBatteryPropertiesListener : batteryPropertiesChanged!
<14>[10012.175298] [0:
healthd: 3346] : <6>[10012.176656] [1:onic.tuise
rvice: 659] t-base-tui module: ioctl 0x80047402
<6>[10012.176678] [1:onic.tuiservice: 659] TUI_IO_WAITCMD
<4>[10012.178864] [1: system_server: 4318] done.
<14>[10012.180078] [0:
healthd: 3346] BatteryPropertiesRegistrar: notify
Listeners : done
<6>[10012.181063] [0:
kworker/0:0:13589] exynos-dwc3 15400000.usb: dwc3_exyn
os_runtime_suspend
<6>[10012.186916] [0: thread_hotplug:19155] frequency info : 1200000, prev_cmd
1, exe_cmd 4
<6>[10012.186940] [0: thread_hotplug:19155] lcd is on : 0, low power mode = 0,
dm_hotplug disable = 0
<6>[10012.186953] [0: thread_hotplug:19155] cluster1 cores hotplug out : 0
<6>[10012.187282] [2: system_server: 4318] mdm_hsic_pm_notify_event: unblock r
equest
<6>[10012.187312] [2: system_server: 4318] request_active_lock_set
<6>[10012.187476] [2: system_server: 4318] PM: suspend exit 2016-11-17 16:20:3
7.693633021 UTC
<6>[10012.206267] [0: kworker/u16:8:32451] mdm_hsic_rpm_check
<6>[10012.206305] [0: kworker/u16:8:32451] mdm_hsic_rpm_restart
<6>[10012.287811] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10012.287864] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[10012.287882] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[10012.287902] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[10012.288095] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[10012.385644] [0: thread_hotplug:19155] frequency info : 1500000, prev_cmd
4, exe_cmd 0
<6>[10012.385665] [0: thread_hotplug:19155] lcd is on : 0, low power mode = 0,
dm_hotplug disable = 0
<6>[10012.385675] [0: thread_hotplug:19155] cluster1 cores hotplug out : 0
<4>[10012.386145] [5:
swapper/5:
0] CPU5: Booted secondary processor
<4>[10012.387368] [6:
swapper/6:
0] CPU6: Booted secondary processor
<4>[10012.388473] [7:
swapper/7:
0] CPU7: Booted secondary processor

<6>[10012.489227] [0: thread_hotplug:19155]


, exe_cmd 4
<6>[10012.489293] [0: thread_hotplug:19155]
dm_hotplug disable = 0
<6>[10012.489330] [0: thread_hotplug:19155]
<6>[10012.589196] [0: thread_hotplug:19155]
, exe_cmd 1
<6>[10012.589254] [0: thread_hotplug:19155]
dm_hotplug disable = 0
<6>[10012.589291] [0: thread_hotplug:19155]
<5>[10012.593666] [0: thread_hotplug:19155]
<5>[10012.597950] [0: thread_hotplug:19155]
<5>[10012.602628] [0: thread_hotplug:19155]
<5>[10012.606454] [0: thread_hotplug:19155]
<5>[10012.614294] [0: thread_hotplug:19155]
<5>[10012.621716] [0: thread_hotplug:19155]
<6>[10012.625186] [0: thread_hotplug:19155]
0, active_cpu=0x00000001
<6>[10012.625485] [1:
mc_fastcall: 1747]
<5>[10012.629916] [0: thread_hotplug:19155]
<7>[10012.681467] [0:
kworker/0:0:13589]
<7>[10012.692910] [0:
kworker/0:0:13589]
<7>[10012.693019] [0:
kworker/0:0:13589]
1
<7>[10012.693070] [0:
kworker/0:0:13589]
hub
<3>[10012.694039] [0:
kworker/0:0:13589]
time_suspend
<7>[10012.706729] [0:
kworker/0:0:13589]
amsung_usb2phy_runtime_suspend
<6>[10012.706831] [0:
kworker/0:0:13589]
<6>[10012.707179] [0: system_server: 4318]
38.213324990 UTC
<6>[10012.726488] [0:
kworker/0:0:13589]
child=0
<6>[10012.707221] [0: system_server: 4318]
<7>[10012.732513] [0: system_server: 4318]
<6>[10012.732691] [0: system_server: 4318]
ynamic_hotplug CMD_SLEEP_PREPARE
<6>[10012.732706] [0: system_server: 4318]
leep_prepare_cpus : 5
<4>[10012.733350] [1:
swapper/1:
0]
<6>[10012.736010] [0: system_server: 4318]
1, active_cpu=0x00000000
<6>[10012.736126] [0:
mc_fastcall: 1747]
<4>[10012.736953] [2:
swapper/2:
0]
<4>[10012.738807] [3:
swapper/3:
0]
<4>[10012.740973] [4:
swapper/4:
0]
<6>[10012.742701] [0: thread_hotplug:19155]
<6>[10012.747305] [1: system_server: 4318]
uest
<3>[10012.748833] [1:
mdm_helper: 3355]
<4>[10012.748494] [0: system_server: 4318]
<6>[10012.750966] [0: system_server: 4318]
l
<4>[10012.750996] [0: system_server: 4318]
<3>[10012.751012] [0: system_server: 4318]
02 seconds
<3>[10012.751318] [2:
mdm_helper: 3355]
<4>[10012.751029] [1:onic.tuiservice: 659]

frequency info : 400000, prev_cmd 0


lcd is on : 0, low power mode = 0,
cluster1 cores hotplug out : 0
frequency info : 400000, prev_cmd 4
lcd is on : 0, low power mode = 0,
cluster1 cores hotplug out : 0
CPU7: shutdown
CPU6: shutdown
CPU5: shutdown
CPU4: shutdown
CPU3: shutdown
CPU2: shutdown
MobiCore mcd: <- core_num=0x0000000
MobiCore mcd: CoreSwap ok 1 -> 0
CPU1: shutdown
usb 1-2: usb auto-suspend, wakeup 1
hub 1-0:1.0: hub_suspend
usb usb1: bus auto-suspend, wakeup
s5p-ehci 15510000.usb: suspend root
s5p-ehci 15510000.usb: s5p_ehci_run
samsung-usb2phy 15530000.usb2phy: s
request_active_lock_release
PM: suspend entry 2016-11-17 16:20:
s5p_ehci_runtime_suspend: usage=0,
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
exynos_dm_hotplug_notifier, 958 : d
nr_sleep_prepare_cpus : 4, tmp_nr_s
CPU1: Booted secondary processor
MobiCore mcd: <- core_num=0x0000000
MobiCore mcd: CoreSwap ok 0 -> 1
CPU2: Booted secondary processor
CPU3: Booted secondary processor
CPU4: Booted secondary processor
stopped thread_hotplug
mdm_hsic_pm_notify_event: block req
esoc REQ engine released from wait
Freezing user space processes ...
last active wakeup source: eventpol
Freezing of tasks aborted after 0.0
esoc REQ enginer waiting on request
Restarting tasks ...

t-base-tui module: ioctl 0x80047402 <6>[10012.753003] [1:onic.tuiservice: 659]


TUI_IO_WAITCMD
<4>[10012.753501] [0: system_server: 4318] done.
<6>[10012.757938] [0: system_server: 4318] mdm_hsic_pm_notify_event: unblock r
equest
<6>[10012.757970] [0: system_server: 4318] request_active_lock_set
<6>[10012.758088] [0: system_server: 4318] PM: suspend exit 2016-11-17 16:20:3
8.264246121 UTC
<6>[10012.775684] [0: kworker/u16:8:32451] mdm_hsic_rpm_check
<7>[10012.775742] [0: kworker/u16:8:32451] s5p-ehci 15510000.usb: s5p_ehci_run
time_resume
<6>[10012.775768] [0: kworker/u16:8:32451] request_active_lock_set
<7>[10012.775800] [0: kworker/u16:8:32451] samsung-usb2phy 15530000.usb2phy: s
amsung_usb2phy_runtime_resume
<6>[10012.775862] [0: kworker/u16:8:32451] s5p_ehci_runtime_resume: usage=1, c
hild=0
<7>[10012.775897] [0: kworker/u16:8:32451] usb usb1: usb auto-resume
<7>[10012.775927] [0: kworker/u16:8:32451] s5p-ehci 15510000.usb: resume root
hub
<7>[10012.775956] [0: kworker/u16:8:32451] s5p-ehci 15510000.usb: LRESET 0
<7>[10012.799034] [0: kworker/u16:8:32451] hub 1-0:1.0: hub_resume
<7>[10012.799100] [0: kworker/u16:8:32451] hub 1-0:1.0: port 2: status 0503 ch
ange 0000
<7>[10012.799163] [0: kworker/u16:8:32451] usb 1-2: finish resume
<7>[10012.799252] [2:
khubd: 742] hub 1-0:1.0: state 7 ports 2 chg 00
00 evt 0000
<6>[10012.802011] [0: kworker/u16:8:32451] [CHKRA:5]>
<6>[10012.802138] [0: kworker/u16:8:32451] mdm_hsic_rpm_restart
<6>[10012.855813] [0: thread_hotplug:19191] frequency info : 900000, prev_cmd 1
, exe_cmd 4
<6>[10012.855839] [0: thread_hotplug:19191] lcd is on : 0, low power mode = 1,
dm_hotplug disable = 0
<6>[10012.855855] [0: thread_hotplug:19191] cluster1 cores hotplug out : 0
<6>[10013.237153] [1:
kworker/1:4:14113] MIF(418000): unset TMU_COLD: 612500
=> (set_volt: 575000, get_volt: 575000)
<6>[10013.238084] [1:
kworker/1:4:14113] DISP(100000): unset TMU_COLD: (set_
volt: 650000, get_volt: 650000)
<6>[10013.239200] [1:
kworker/1:4:14113] INT(100000): unset TMU_COLD: 687500
=> 650000
<6>[10013.239248] [1:
kworker/1:4:14113] tmu temperature state 1 to 0, cur_t
emp : 33
<6>[10013.289125] [0: kworker/u16:3: 8924] [mhi_initiate_m3] Entered MHI state
4, Pending M0 0 Pending M3 0
<6>[10013.289199] [0: kworker/u16:3: 8924] [mhi_initiate_m3] Triggering wake o
ut of M2
<6>[10013.294836] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26440
<6>[10013.294895] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10013.295139] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[10013.295191] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[10013.295234] [1:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[10013.299586] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[10013.299731] [0: kworker/u16:3: 8924] [mhi_initiate_m3] Cancelled M1 time
r, timer was active
<6>[10013.299974] [0: kworker/u16:3: 8924] [mhi_initiate_m3] Waiting for M3 co
mpletion.
<7>[10013.312021] [0:
kworker/0:0:13589] usb 1-2: usb auto-suspend, wakeup 1

<6>[10013.312946] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re


ceived ring 0x0
<6>[10013.313192] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 5
<6>[10013.313244] [1:MHI_STATE_THREA: 4605] [process_M3_transition] Processing
M3 state transition
<6>[10013.313462] [0: kworker/u16:3: 8924] [mhi_initiate_m3] M3 completion rec
eived
<6>[10013.313528] [0: kworker/u16:3: 8924] [mhi_turn_off_pcie_link] Entered...
<7>[10013.322497] [0:
kworker/0:0:13589] hub 1-0:1.0: hub_suspend
<7>[10013.322570] [0:
kworker/0:0:13589] usb usb1: bus auto-suspend, wakeup
1
<7>[10013.322622] [0:
kworker/0:0:13589] s5p-ehci 15510000.usb: suspend root
hub
<3>[10013.323565] [0:
kworker/0:0:13589] s5p-ehci 15510000.usb: s5p_ehci_run
time_suspend
<6>[10013.325938] [0: kworker/u16:3: 8924] mhi 0000:01:00.0: [debug] pmcsr reg
: b dev->current_state : 0
<6>[10013.326122] [0: kworker/u16:3: 8924] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[10013.326237] [0: kworker/u16:3: 8924] exynos-pcie 10ee0000.pcie0: ack mes
sage is ok
<6>[10013.326283] [0: kworker/u16:3: 8924] exynos-pcie 10ee0000.pcie0: receive
d Enter_L23_READY DLLP packet
<6>[10013.326339] [0: kworker/u16:3: 8924] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[10013.326506] [0: kworker/u16:3: 8924] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<7>[10013.335699] [0:
kworker/0:0:13589] samsung-usb2phy 15530000.usb2phy: s
amsung_usb2phy_runtime_suspend
<6>[10013.335766] [0:
kworker/0:0:13589] request_active_lock_release
<6>[10013.335829] [0:
kworker/0:0:13589] s5p_ehci_runtime_suspend: usage=0,
child=0
<6>[10013.336222] [1: system_server: 4318] PM: suspend entry 2016-11-17 16:20:
38.842369304 UTC
<6>[10013.336266] [1: system_server: 4318] PM: Syncing filesystems ... done.
<7>[10013.345463] [1: system_server: 4318] PM: Preparing system for mem sleep
<6>[10013.345815] [2: system_server: 4318] exynos_dm_hotplug_notifier, 958 : d
ynamic_hotplug CMD_SLEEP_PREPARE
<6>[10013.345867] [2: system_server: 4318] nr_sleep_prepare_cpus : 4, tmp_nr_s
leep_prepare_cpus : 5
<6>[10013.345941] [0: thread_hotplug:19191] stopped thread_hotplug
<6>[10013.356577] [0: kworker/u16:3: 8924] [mhi_turn_off_pcie_link] Exited...
<6>[10013.357171] [0: system_server: 4318] MIF(635000): set TMU_COLD: 637500 =
> (set_volt: 675000, get_volt: 675000)
<6>[10013.357873] [0: system_server: 4318] DISP(100000): set TMU_COLD: 650000
=> (set_volt: 687500, get_volt: 687500)
<6>[10013.358696] [0: system_server: 4318] INT(100000): set TMU_COLD: 650000 =
> 687500
<6>[10013.358718] [0: system_server: 4318] tmu temperature state 0 to 1
<6>[10013.358743] [0: system_server: 4318] mdm_hsic_pm_notify_event: block req
uest
<3>[10013.360095] [2:
mdm_helper: 3355] esoc REQ engine released from wait
<4>[10013.359772] [0: system_server: 4318] Freezing user space processes ... (
elapsed 0.005 seconds) done.
<4>[10013.365285] [0: system_server: 4318] Freezing remaining freezable tasks
... (elapsed 0.005 seconds) done.
<7>[10013.371049] [0: system_server: 4318] PM: Entering mem sleep
<4>[10013.371069] [0: system_server: 4318] Suspending console(s) (use no_conso
le_suspend to debug)

<6>[10013.372400] [0: system_server: 4318]


os_runtime_resume
<6>[10013.373951] [3: kworker/u16:23:32546]
<6>[10013.373977] [3: kworker/u16:23:32546]
MHI state 5
<4>[10013.373990] [0: system_server: 4318]
0x00000001
<6>[10013.374003] [3: kworker/u16:23:32546]
5, Pending M0 0 Pending M3 0
<6>[10013.374019] [3: kworker/u16:23:32546]
state 0.
<4>[10013.374216] [0: system_server: 4318]
_D3_INFORM to dongle
<4>[10013.375413] I[0:
swapper/0:
0]
<4>[10013.375428] I[0:
swapper/0:
0]
Received D3 ACK
<4>[10013.375886] [0: system_server: 4318]
0x00000008
<4>[10013.376233] [0: system_server: 4318]
_D0_INFORM_IN_USE to dongle
<4>[10013.376255] [0: system_server: 4318]
<6>[10013.376500] [0: system_server: 4318]
43e914e4
<6>[10013.376702] [0: system_server: 4318]
100146
<6>[10013.376910] [0: system_server: 4318]
2800003
<6>[10013.377118] [0: system_server: 4318]
10
<6>[10013.377326] [0: system_server: 4318]
1c200004
<6>[10013.377532] [0: system_server: 4318]
0
<6>[10013.377740] [0: system_server: 4318]
1c400004
<6>[10013.377950] [0: system_server: 4318]
0
<6>[10013.378155] [0: system_server: 4318]
0
<6>[10013.378363] [0: system_server: 4318]
0
<6>[10013.378571] [0: system_server: 4318]
0
<6>[10013.378778] [0: system_server: 4318]
77414e4
<6>[10013.379016] [0: system_server: 4318]
0
<6>[10013.379196] [0: system_server: 4318]
48
<6>[10013.379404] [0: system_server: 4318]
0
<6>[10013.379615] [0: system_server: 4318]
1ed
<6>[10013.379822] [0: system_server: 4318]
2c10
<6>[10013.380030] [0: system_server: 4318]
142
<6>[10013.380042] [0: system_server: 4318]
0
<6>[10013.380054] [0: system_server: 4318]

exynos-dwc3 15400000.usb: dwc3_exyn


[mhi_suspend] [mhi_suspend]
[mhi_suspend] Entered, sys state 2,
dhdpcie_send_mb_data: H2D_MB_DATA:
[mhi_initiate_m3] Entered MHI state
[mhi_initiate_m3] MHI state 5, link
dhdpcie_send_mb_data: send H2D_HOST
D2H_MB_DATA: 0x00000001
dhdpcie_handle_mb_data D2H_MB_DATA:
dhdpcie_send_mb_data: H2D_MB_DATA:
dhdpcie_send_mb_data: send H2D_HOST
dhdpcie_suspend_dev: Enter
pcieh 0001:01:00.0: reg offset: 0:
pcieh 0001:01:00.0: reg offset: 4:
pcieh 0001:01:00.0: reg offset: 8:
pcieh 0001:01:00.0: reg offset: 12:
pcieh 0001:01:00.0: reg offset: 16:
pcieh 0001:01:00.0: reg offset: 20:
pcieh 0001:01:00.0: reg offset: 24:
pcieh 0001:01:00.0: reg offset: 28:
pcieh 0001:01:00.0: reg offset: 32:
pcieh 0001:01:00.0: reg offset: 36:
pcieh 0001:01:00.0: reg offset: 40:
pcieh 0001:01:00.0: reg offset: 44:
pcieh 0001:01:00.0: reg offset: 48:
pcieh 0001:01:00.0: reg offset: 52:
pcieh 0001:01:00.0: reg offset: 56:
pcieh 0001:01:00.0: reg offset: 60:
pcieh 0001:01:00.0: PCI_EXP_DEVCTL:
pcieh 0001:01:00.0: PCI_EXP_LNKCTL:
pcieh 0001:01:00.0: PCI_EXP_SLTCTL:
pcieh 0001:01:00.0: PCI_EXP_RTCTL:

0
<6>[10013.380237] [0: system_server:
: 400
<6>[10013.380445] [0: system_server:
: 1
<6>[10013.380457] [0: system_server:
: 0
<6>[10013.383161] [0: system_server:
device_vendor_id reg : 43e914e4
<6>[10013.383365] [0: system_server:
PMCSR reg value: 4108
<6>[10013.383576] [0: system_server:
PMCSR reg value: 410b
<6>[10013.383742] [0: system_server:
device_vendor_id reg : 43e914e4
<6>[10013.396024] [1: system_server:
eg : 410b dev->current_state : 0
<6>[10013.396192] [1: system_server:
vendor_id reg : 43e914e4
<6>[10013.396225] [1: system_server:
0: a575144d
<6>[10013.396244] [1: system_server:
4: 100147
<6>[10013.396262] [1: system_server:
8: 6040001
<6>[10013.396280] [1: system_server:
12: 10010
<6>[10013.396297] [1: system_server:
16: 0
<6>[10013.396315] [1: system_server:
20: 0
<6>[10013.396333] [1: system_server:
24: 10100
<6>[10013.396351] [1: system_server:
28: 0
<6>[10013.396369] [1: system_server:
32: 1ff01c00
<6>[10013.396387] [1: system_server:
36: 0
<6>[10013.396404] [1: system_server:
40: 0
<6>[10013.396422] [1: system_server:
44: 0
<6>[10013.396440] [1: system_server:
48: 0
<6>[10013.396458] [1: system_server:
52: 40
<6>[10013.396476] [1: system_server:
56: 0
<6>[10013.396494] [1: system_server:
60: 101ed
<6>[10013.396646] [1: system_server:
TL: 2010
<6>[10013.396664] [1: system_server:
TL: 42
<6>[10013.396677] [1: system_server:
TL: 0
<6>[10013.396694] [1: system_server:
L: 0
<6>[10013.396712] [1: system_server:

4318] pcieh 0001:01:00.0: PCI_EXP_DEVCTL2


4318] pcieh 0001:01:00.0: PCI_EXP_LNKCTL2
4318] pcieh 0001:01:00.0: PCI_EXP_SLTCTL2
4318] pcieh 0001:01:00.0: [debug] step 1,
4318] pcieh 0001:01:00.0: [debug] step 2,
4318] pcieh 0001:01:00.0: [debug] step 3,
4318] pcieh 0001:01:00.0: [debug] step 4,
4318] pcieh 0001:01:00.0: [debug] pmcsr r
4318] pcieh 0001:01:00.0: [debug] device_
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
4318] pcieport 0001:00:00.0: PCI_EXP_RTCT
4318] pcieport 0001:00:00.0: PCI_EXP_DEVC

TL2: 400
<6>[10013.396730] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL2: 1
<6>[10013.396742] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL2: 0
<6>[10013.396851] [1: system_server: 4318] exynos-pcie 15660000.pcie1: ack mes
sage is ok
<6>[10013.396866] [1: system_server: 4318] exynos-pcie 15660000.pcie1: receive
d Enter_L23_READY DLLP packet
<6>[10013.396886] [1: system_server: 4318] exynos-pcie 15660000.pcie1: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[10013.396992] [1: system_server: 4318] exynos-pcie 15660000.pcie1: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[10013.399228] [0: system_server: 4318] voltage(793750) + volt_offset(37500
) is bigger than max_volt(793750)
<6>[10013.399261] [0: system_server: 4318] voltage(793750) + volt_offset(37500
) is bigger than max_volt(793750)
<6>[10013.400328] [0: system_server: 4318] DEVFREQ(MIF): suspend voltage(79375
0 793750)
<6>[10013.402384] [0: system_server: 4318] s2m_rtc_update: RTC_UPDATE_REGISTER
check : 0x00
<6>[10013.402546] [0: system_server: 4318] s2m-rtc s2m-rtc: s2m_rtc_read_time:
2016-11-17 16:20:38(0x10)PM
<5>[10013.402783] [0: system_server: 4318] sd 0:0:0:0: [sda] Synchronizing SCS
I cache
<6>[10013.407717] [0: system_server: 4318] s2m_rtc_update: RTC_UPDATE_REGISTER
check : 0x00
<6>[10013.407861] [0: system_server: 4318] s2m-rtc s2m-rtc: s2m_rtc_read_time:
2016-11-17 16:20:38(0x10)PM
<6>[10013.409083] [0: system_server: 4318] s2m_rtc_update: RTC_UPDATE_REGISTER
check : 0x00
<6>[10013.409236] [0: system_server: 4318] s2m-rtc s2m-rtc: s2m_rtc_read_time:
2016-11-17 16:20:38(0x10)PM
<6>[10013.409257] [0: system_server: 4318] s2m-rtc s2m-rtc: s2m_rtc_set_alarm:
2016-11-17 16:25:28(0x10)PM
<6>[10013.410592] [0: system_server: 4318] s2m_rtc_update: RTC_UPDATE_REGISTER
check : 0x00
<6>[10013.411922] [0: system_server: 4318] s2m_rtc_update: RTC_UPDATE_REGISTER
check : 0x00
<6>[10013.412328] [0: system_server: 4318] max86900_pm_suspend
<6>[10013.412542] [0: system_server: 4318] wake enabled for irq 7
<2>[10013.412651] [0: system_server: 4318] --------Si47xx i2c driver Si47xx_su
spend called
<2>[10013.412662] [0: system_server: 4318] Si47xx_suspend: device not supporte
d
<6>[10013.412691] [0: system_server: 4318] [VIB] max77843_haptic_suspend
<6>[10013.412705] [0: system_server: 4318] [VIB] max77843_haptic_i2c 0
<6>[10013.413498] [0: system_server: 4318] wake enabled for irq 4
<6>[10013.413602] [0: system_server: 4318] vfsspi_regulator_onoff: ocp off, sm
c ret = 0
<6>[10013.413612] [0: system_server: 4318] vfsspi_regulator_onoff: off
<6>[10013.413632] [0: system_server: 4318] vfsspi_pm_suspend
<6>[10013.413676] [0: system_server: 4318] [SSP] ssp_suspend:
<6>[10013.420134] [0: system_server: 4318] [SSP] ssp_send_cmd: command 0xd4 0
<6>[10013.420304] [0: system_server: 4318] mst_ldo_device_suspend
<6>[10013.420357] [0: system_server: 4318] MST_LDO_DRV]]] suspend
<6>[10013.420365] [0: system_server: 4318] MST_LDO_DRV]]] suspend success afte
r smc : 122f122
<6>[10013.447046] [1: system_server: 4318] [MAX98505_DEBUG] max98505_suspend:
enter

<6>[10013.447130] [1: system_server: 4318] pacific-audio sound.34: pacific_sus


pend_post : set AIF1 port slave
<6>[10013.447185] [1: system_server: 4318] wake enabled for irq 577
<6>[10013.447197] [1: system_server: 4318] wake enabled for irq 580
<4>[10013.447219] [1: system_server: 4318] certify_hall_suspend start
<4>[10013.447234] [1: system_server: 4318] [keys] certify_hall_suspend certify
_status : 0 (detach)
<4>[10013.447251] [1: system_server: 4318] hall_suspend start
<4>[10013.447263] [1: system_server: 4318] [keys] hall_suspend flip_status : 1
(open)
<6>[10013.459933] [0: system_server: 4318] [MIF] usb_phy_prepare_shutdown
<6>[10013.459951] [0: system_server: 4318] dev rdy val = 1
<6>[10013.459961] [0: system_server: 4318] set_host_stat:set host port power s
tatus to [0]
<6>[10013.489930] [0: system_server: 4318] wait_dev_pwr_stat:[PWR OFF]...
<6>[10013.496964] I[0: system_server: 4318] mdm_device_ready_irq_handler, irq:
host ready val : 00000000
<6>[10013.496976] I[0: system_server: 4318] mdm_device_ready_irq_handler, irq:
dev ready val : 00000000
<6>[10013.519897] [0: system_server: 4318] done
<7>[10013.519936] [0: system_server: 4318] samsung-usb2phy 15530000.usb2phy: s
amsung_usb2phy_shutdown: End of setting for shutdown
<6>[10013.520144] [0: system_server: 4318] spi suspend is handled in device su
spend, dma mode = 0, bus_num = 3
<6>[10013.520163] [0: system_server: 4318] spi suspend is handled in device su
spend, dma mode = 0, bus_num = 1
<6>[10013.520247] [0: system_server: 4318] 3s3c24xx_serial_shutdown: port=4 res
et
<6>[10013.521160] [0: system_server: 4318] PM: suspend of devices complete aft
er 147.713 msecs
<6>[10013.521174] [0: system_server: 4318] ---Enabled regulators--<6>[10013.521197] [0: system_server: 4318] LDO1: 1200000uV, 0xffffffea mode, n
ull
<6>[10013.523020] [0: system_server: 4318] VDDIO_1.8V_COMP: 1800000uV, 0xfffff
fea mode, null
<6>[10013.523846] [0: system_server: 4318] VDDD_RET_1.0V_COMP: 700000uV, 0xfff
fffea mode, null
<6>[10013.525639] [0: system_server: 4318] VDD20_1P8_AP: 1800000uV, 0xffffffea
mode, null
<6>[10013.526243] [0: system_server: 4318] VCC_1.8V_CODEC_PMIC: 1800000uV, 0xf
fffffea mode, spi0.0-DBVDD1, spi0.0-AVDD, regulator.47-SUPPLY
<6>[10013.527786] [0: system_server: 4318] regulator-dummy: -22uV, 0xffffffea
mode, null
<6>[10013.527798] [0: system_server: 4318] Always On regulator count :10 [VDD2
2_1P1_2MIC][vdd_ldo8][vdd_mldo][vdd_lldo][vdd_disp_cam0][vdd_int][vdd_apollo][vd
d_atlas][vdd_mif][safeout1_range]
<6>[10013.527808] [0: system_server: 4318] ---Enabled regulator count: 16--<6>[10013.529347] [0: system_server: 4318] PM: late suspend of devices complet
e after 1.521 msecs
<6>[10013.529969] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
0: ffffffff
<6>[10013.529984] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
4: ffffffff
<6>[10013.529997] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
8: ffffffff
<6>[10013.530010] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
12: ffffffff
<6>[10013.530023] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
16: ffffffff
<6>[10013.530036] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:

20: ffffffff
<6>[10013.530049] [0: system_server:
24: ffffffff
<6>[10013.530062] [0: system_server:
28: ffffffff
<6>[10013.530075] [0: system_server:
32: ffffffff
<6>[10013.530087] [0: system_server:
36: ffffffff
<6>[10013.530100] [0: system_server:
40: ffffffff
<6>[10013.530113] [0: system_server:
44: ffffffff
<6>[10013.530126] [0: system_server:
48: ffffffff
<6>[10013.530138] [0: system_server:
52: ffffffff
<6>[10013.530151] [0: system_server:
56: ffffffff
<6>[10013.530165] [0: system_server:
60: ffffffff
<6>[10013.530178] [0: system_server:
TL: 0
<6>[10013.530190] [0: system_server:
TL: 0
<6>[10013.530203] [0: system_server:
TL: 0
<6>[10013.530216] [0: system_server:
L: 0
<6>[10013.530228] [0: system_server:
TL2: 0
<6>[10013.530241] [0: system_server:
TL2: 0
<6>[10013.530253] [0: system_server:
TL2: 0
<6>[10013.531066] [0: system_server:
eady off
<6>[10013.531083] [0: system_server:
eady off
<6>[10013.531195] [0: system_server:
oirq, dma mode = 1, bus_num = 4
<6>[10013.531216] [0: system_server:
oirq, dma mode = 1, bus_num = 0
<6>[10013.531423] [0: system_server:
te after 2.058 msecs
<4>[10013.531438] [0: system_server:
<6>[10013.531703] [1: system_server:
0, active_cpu=0x00000001
<6>[10013.531759] [1:
mc_fastcall:
<5>[10013.533472] [2: system_server:
<5>[10013.535849] [0: system_server:
<5>[10013.538160] [0: system_server:
<5>[10013.540314] [0: system_server:
<6>[10013.541069] [0: system_server:
<6>[10013.541069] [0: system_server:
<6>[10013.541069] [0: system_server:
<6>[10013.541069] [0: system_server:
ost_wake
<6>[10013.541069] [0: system_server:
<6>[10013.541215] [0: system_server:

4318] pcieport 0001:00:00.0: reg offset:


4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
4318] pcieport 0001:00:00.0: PCI_EXP_RTCT
4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
4318] exynos-pcie 15660000.pcie1: RC1 alr
4318] exynos-pcie 10ee0000.pcie0: RC0 alr
4318] spi suspend is handled in suspend_n
4318] spi suspend is handled in suspend_n
4318] PM: noirq suspend of devices comple
4318] Disabling non-boot CPUs ...
4318] MobiCore mcd: <- core_num=0x0000000
1747]
4318]
4318]
4318]
4318]
4318]
4318]
4318]
4318]

MobiCore mcd: CoreSwap ok 1 -> 0


CPU1: shutdown
CPU2: shutdown
CPU3: shutdown
CPU4: shutdown
[MIF] 1552000Khz
WAKEUP_STAT: 0x80000001
EINT_PEND: 0x00, 0x40 0x08, 0x00
Resume caused by IRQ 586, dhdpcie_h

4318] Suspended for 0.000 seconds


4318] Enabling non-boot CPUs ...

<4>[10013.541382] [1:
swapper/1:
0] CPU1: Booted secondary processor
<6>[10013.542053] [0: system_server: 4318] MobiCore mcd: <- core_num=0x0000000
1, active_cpu=0x00000000
<6>[10013.542102] [0:
mc_fastcall: 1747] MobiCore mcd: CoreSwap ok 0 -> 1
<6>[10013.542140] [0: system_server: 4318] CPU1 is up
<4>[10013.542276] [2:
swapper/2:
0] CPU2: Booted secondary processor
<6>[10013.542846] [0: system_server: 4318] CPU2 is up
<4>[10013.542996] [3:
swapper/3:
0] CPU3: Booted secondary processor
<6>[10013.543546] [0: system_server: 4318] CPU3 is up
<4>[10013.543773] [4:
swapper/4:
0] CPU4: Booted secondary processor
<6>[10013.544475] [0: system_server: 4318] CPU4 is up
<6>[10013.544676] [0: system_server: 4318] spi resume is handled in resume_noi
rq, dma mode = 1, bus_num = 0
<6>[10013.544733] [0: system_server: 4318] spi resume is handled in resume_noi
rq, dma mode = 1, bus_num = 4
<6>[10013.558944] [1: system_server: 4318] pcieport 0001:00:00.0: [debug] pmcs
r reg : ffff dev->current_state : 3
<6>[10013.558958] [1: system_server: 4318] pcieport 0001:00:00.0: [debug] devi
ce_vendor_id reg : ffffffff
<6>[10013.558971] [1: system_server: 4318] pcieport 0001:00:00.0: Refused to c
hange power state, currently in D3, PCI_PM_CTRL=ffff
<6>[10013.558984] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL: 0
<6>[10013.558994] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL: 0
<6>[10013.559003] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL: 0
<6>[10013.559012] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_RTCT
L: 0
<6>[10013.559022] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL2: 0
<6>[10013.559031] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL2: 0
<6>[10013.559041] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL2: 0
<6>[10013.559052] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x3c (was 0xffffffff, writing 0xffffffff)
<6>[10013.559064] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x38 (was 0xffffffff, writing 0xffffffff)
<6>[10013.559075] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x34 (was 0xffffffff, writing 0xffffffff)
<6>[10013.559085] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x30 (was 0xffffffff, writing 0xffffffff)
<6>[10013.559096] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x2c (was 0xffffffff, writing 0xffffffff)
<6>[10013.559107] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x28 (was 0xffffffff, writing 0xffffffff)
<6>[10013.559118] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x24 (was 0xffffffff, writing 0xffffffff)
<6>[10013.559128] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x20 (was 0xffffffff, writing 0xffffffff)
<6>[10013.559139] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x1c (was 0xffffffff, writing 0xffffffff)
<6>[10013.559150] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x18 (was 0xffffffff, writing 0xffffffff)
<6>[10013.559160] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x14 (was 0xffffffff, writing 0xffffffff)
<6>[10013.559171] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x10 (was 0xffffffff, writing 0xffffffff)
<6>[10013.559182] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co

nfig space at offset 0xc (was 0xffffffff, writing 0xffffffff)


<6>[10013.559193] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x8 (was 0xffffffff, writing 0xffffffff)
<6>[10013.559203] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x4 (was 0xffffffff, writing 0xffffffff)
<6>[10013.559214] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x0 (was 0xffffffff, writing 0xffffffff)
<6>[10013.559238] [1: system_server: 4318] pcieh 0001:01:00.0: [debug] step 1,
device_vendor_id reg : ffffffff
<6>[10013.559248] [1: system_server: 4318] pcieh 0001:01:00.0: [debug] step 2,
PMCSR reg value: ffff
<6>[10013.559258] [1: system_server: 4318] pcieh 0001:01:00.0: [debug] step 3,
PMCSR reg value: 0
<6>[10013.559267] [1: system_server: 4318] pcieh 0001:01:00.0: [debug] step 4,
device_vendor_id reg : ffffffff
<6>[10013.572252] [1: system_server: 4318] pcieh 0001:01:00.0: [debug] pmcsr r
eg : ffff dev->current_state : 3
<6>[10013.572262] [1: system_server: 4318] pcieh 0001:01:00.0: [debug] device_
vendor_id reg : ffffffff
<6>[10013.572273] [1: system_server: 4318] pcieh 0001:01:00.0: Refused to chan
ge power state, currently in D3, PCI_PM_CTRL=ffff
<6>[10013.572286] [1: system_server: 4318] exynos-pcie 15660000.pcie1: PCIE li
nk state is 0
<6>[10013.572296] [1: system_server: 4318] pcieh 0001:01:00.0: [debug] setp 5,
PMCSR reg value: ffff
<6>[10013.572307] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_DEVCTL:
2c10
<6>[10013.572316] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_LNKCTL:
142
<6>[10013.572326] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_SLTCTL:
0
<6>[10013.572335] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_RTCTL:
0
<6>[10013.572344] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_DEVCTL2
: 400
<6>[10013.572353] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_LNKCTL2
: 1
<6>[10013.572362] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_SLTCTL2
: 0
<6>[10013.572373] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x3c (was 0xffffffff, writing 0x1ed)
<6>[10013.572384] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x38 (was 0xffffffff, writing 0x0)
<6>[10013.572395] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x34 (was 0xffffffff, writing 0x48)
<6>[10013.572406] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x30 (was 0xffffffff, writing 0x0)
<6>[10013.572417] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x2c (was 0xffffffff, writing 0x77414e4)
<6>[10013.572428] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x28 (was 0xffffffff, writing 0x0)
<6>[10013.572438] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x24 (was 0xffffffff, writing 0x0)
<6>[10013.602408] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x20 (was 0xffffffff, writing 0x0)
<6>[10013.632377] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x1c (was 0xffffffff, writing 0x0)
<6>[10013.662346] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x18 (was 0xffffffff, writing 0x1c400004)
<6>[10013.692315] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi

g space at offset 0x14 (was 0xffffffff, writing 0x0)


<6>[10013.722284] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x10 (was 0xffffffff, writing 0x1c200004)
<6>[10013.752253] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0xc (was 0xffffffff, writing 0x10)
<6>[10013.752265] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x8 (was 0xffffffff, writing 0x2800003)
<6>[10013.752276] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x4 (was 0xffffffff, writing 0x100146)
<6>[10013.752287] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x0 (was 0xffffffff, writing 0x43e914e4)
<6>[10013.765585] [1: system_server: 4318] pcieport 0000:00:00.0: [debug] pmcs
r reg : ffff dev->current_state : 3
<6>[10013.765596] [1: system_server: 4318] pcieport 0000:00:00.0: [debug] devi
ce_vendor_id reg : ffffffff
<6>[10013.778910] [1: system_server: 4318] mhi 0000:01:00.0: [debug] pmcsr reg
: ffff dev->current_state : 3
<6>[10013.778920] [1: system_server: 4318] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : ffffffff
<6>[10013.779041] [1: system_server: 4318] PM: noirq resume of devices complet
e after 234.552 msecs
<6>[10013.779491] [1: system_server: 4318] exynos-mailbox 11240000.mailbox: Lo
ading APM firmware ...
<6>[10013.779658] [1: system_server: 4318] OK
<6>[10013.780758] [1: system_server: 4318] PM: early resume of devices complet
e after 1.368 msecs
<6>[10013.780993] [0: kworker/u16:33:32557] [mhi_resume] [mhi_resume]
<6>[10013.781010] [0: kworker/u16:33:32557] [mhi_initiate_m0] Entered MHI state
5, Pending M0 0 Pending M3 0
<6>[10013.781021] [0: kworker/u16:33:32557] [mhi_initiate_m0] Waiting for M0 M1
or M3. Currently 5...
<6>[10013.781032] [0: kworker/u16:33:32557] [mhi_initiate_m0] Wait complete sta
te: 5
<6>[10013.781041] [0: kworker/u16:33:32557] [mhi_turn_on_pcie_link] Entered...
<6>[10013.781057] [0: kworker/u16:33:32557] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, start of poweron, pcie state: 0
<6>[10013.781242] [1: system_server: 4318] s3c2410_wdt: watchdog enabled
<6>[10013.784723] [1: system_server: 4318] spi resume is handled in device res
ume, dma mode = 0, bus_num = 1
<6>[10013.784757] [1: system_server: 4318] spi resume is handled in device res
ume, dma mode = 0, bus_num = 3
<7>[10013.784990] [1: system_server: 4318] samsung-usb2phy 15530000.usb2phy: C
an't configure specified phy mode
<7>[10013.785008] [1: system_server: 4318] samsung-usb2phy 15530000.usb2phy: e
nd of samsung_usb2phy_init
<7>[10013.785023] [1: system_server: 4318] samsung-usb2phy 15530000.usb2phy: s
amsung_usb2phy_runtime_resume
<4>[10013.785044] [1: system_server: 4318] usb usb1: root hub lost power or wa
s reset
<7>[10013.785067] [1: system_server: 4318] s5p-ehci 15510000.usb: reset comman
d 0080b02 park=3 ithresh=8 period=1024 Reset HALT
<6>[10013.785083] [1: system_server: 4318] dev rdy val = 0
<6>[10013.785091] [1: system_server: 4318] set_host_stat:set host port power s
tatus to [1]
<6>[10013.785102] [1: system_server: 4318] wait_dev_pwr_stat:[PWR ON]...
<6>[10013.806744] I[0:
swapper/0:
0] mdm_device_ready_irq_handler, irq:
host ready val : 00000001
<6>[10013.806754] I[0:
swapper/0:
0] mdm_device_ready_irq_handler, irq:
dev ready val : 00000001
<6>[10013.815064] [1: system_server: 4318] done

<7>[10013.815101] [3: kworker/u16:12:32531] usb usb1: usb resume


<7>[10013.815115] [3: kworker/u16:12:32531] s5p-ehci 15510000.usb: resume root
hub after power loss
<7>[10013.815127] [3: kworker/u16:12:32531] s5p-ehci 15510000.usb: LRESET 0
<7>[10013.815150] [3: kworker/u16:12:32531] hub 1-0:1.0: hub_reset_resume
<7>[10013.815161] [3: kworker/u16:12:32531] hub 1-0:1.0: enabling power on all
ports
<6>[10013.819273] [0: kworker/u16:33:32557] exynos-pcie 10ee0000.pcie0: D state
: 0, c0f000
<6>[10013.831560] [1: kworker/u16:33:32557] exynos-pcie 10ee0000.pcie0: exynos_
pcie_reset: Link up : 0x03656a11
<6>[10013.831795] [1: kworker/u16:33:32557] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, end of poweron, pcie state: 3
<6>[10013.842458] [1: kworker/u16:33:32557] mhi 0000:01:00.0: [debug] pmcsr reg
: 8 dev->current_state : 3
<6>[10013.842638] [1: kworker/u16:33:32557] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[10013.842650] [1: kworker/u16:33:32557] exynos-pcie 10ee0000.pcie0: Recover
y for the link of RC0
<6>[10013.842660] [1: kworker/u16:33:32557] exynos-pcie 10ee0000.pcie0: Recover
config space of RC0 and its EP
<6>[10013.842670] [1: kworker/u16:33:32557] exynos-pcie 10ee0000.pcie0: Recover
RC0
<6>[10013.842698] [1: kworker/u16:33:32557] exynos-pcie 10ee0000.pcie0: Recover
EP of RC0
<6>[10013.843083] [1: kworker/u16:33:32557] exynos-pcie 10ee0000.pcie0: Refresh
ing the saved config space in PCI framework for RC0 and its EP
<7>[10013.845612] [3: kworker/u16:12:32531] s5p-ehci 15510000.usb: GetStatus po
rt:2 status 001803 0 ACK POWER sig=j CSC CONNECT
<7>[10013.845625] [3: kworker/u16:12:32531] hub 1-0:1.0: port 2: status 0501 ch
ange 0001
<7>[10013.845712] [3: kworker/u16:22:32545] usb 1-2: finish reset-resume
<6>[10013.848263] [1: kworker/u16:33:32557] [mhi_turn_on_pcie_link] Exited...
<6>[10013.848275] [1: kworker/u16:33:32557] [mhi_initiate_m0] Setting M0 ...
<6>[10013.848423] [1: kworker/u16:33:32557] [mhi_initiate_m0] Exited...
<6>[10013.852854] [0: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 5 link 1, ring type 2, index 0 db 0x5fa26460
<6>[10013.852869] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10013.852900] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[10013.852911] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[10013.852921] [1:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[10013.853403] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[10013.853412] [2: kworker/u16:33:32557] [mhi_resume] Wait complete state: 2
<4>[10013.864223] [0: system_server: 4318] ufs_get_device_info: UNIQUE NUMBER
= 02157df271b5cb31 , LT: 0x22
<6>[10013.867929] [0: system_server: 4318] exynos-ufs 15570000.ufs: Power mode
change(0): M(1)G(2)L(2)HS-series(2)
<4>[10013.868272] [0: system_server: 4318] hall_resume start
<4>[10013.868284] [0: system_server: 4318] [keys] hall_resume flip_status : 1
(open)
<4>[10013.868299] [0: system_server: 4318] certify_hall_resume start
<4>[10013.868308] [0: system_server: 4318] [keys] certify_hall_resume certify_
status : 0 (detach)
<6>[10013.868326] [0: system_server: 4318] wake disabled for irq 577
<6>[10013.868335] [0: system_server: 4318] wake disabled for irq 580
<6>[10013.868462] [0:
kworker/0:0:13589] [MAX98505_DEBUG] max98505_resume: e
nter

<6>[10013.869004] [1: system_server: 4318] mst_ldo_device_resume


<6>[10013.869039] [1: system_server: 4318] MST_LDO_DRV]]] resume
<6>[10013.869045] [1: system_server: 4318] MST_LDO_DRV]]] resume success after
smc : 122f122
<6>[10013.873896] [3: system_server: 4318] [SSP] ssp_resume:
<6>[10013.880098] [3: system_server: 4318] [SSP] ssp_send_cmd: command 0xd3 0
<3>[10013.880129] [3: system_server: 4318] vfsspi_wakeup_daemon send signal fa
iled by wakeup(0)
<6>[10013.880160] [3: system_server: 4318] vfsspi_regulator_onoff: ocp on, smc
ret = 0
<6>[10013.883207] [3: system_server: 4318] vfsspi_regulator_onoff: on
<6>[10013.883222] [3: system_server: 4318] vfsspi_pm_resume
<6>[10013.883272] [3: system_server: 4318] wake disabled for irq 4
<6>[10013.883308] [3: system_server: 4318] [VIB] max77843_haptic_resume
<2>[10013.883323] [3: system_server: 4318] Si47xx_resume: device not supported
<6>[10013.883343] [3: system_server: 4318] wake disabled for irq 7
<6>[10013.883549] [3: system_server: 4318] max86900_pm_resume
<6>[10013.885406] [3: system_server: 4318] s2m_rtc_update: RTC_UPDATE_REGISTER
check : 0x00
<6>[10013.885543] [3: system_server: 4318] s2m-rtc s2m-rtc: s2m_rtc_read_time:
2016-11-17 16:20:42(0x10)PM
<6>[10013.888247] [3: system_server: 4318] exynos-pcie 15660000.pcie1: exynos_
pcie_poweron, start of poweron, pcie state: 0
<7>[10013.899034] [3: kworker/u16:22:32545] s5p-ehci 15510000.usb: port 2 reset
complete, port enabled
<7>[10013.899058] [3: kworker/u16:22:32545] s5p-ehci 15510000.usb: GetStatus po
rt:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
<6>[10013.909011] [3: system_server: 4318] exynos-pcie 15660000.pcie1: D state
: 0, 3a700
<6>[10013.910273] [3: system_server: 4318] exynos-pcie 15660000.pcie1: exynos_
pcie_reset: Link up : 0x03d55e11
<6>[10013.910432] [3: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL: 2010
<6>[10013.910582] [3: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL: 42
<6>[10013.910591] [3: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL: 0
<6>[10013.910606] [3: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_RTCT
L: 0
<6>[10013.910622] [3: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL2: 400
<6>[10013.910637] [3: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL2: 1
<6>[10013.910646] [3: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL2: 0
<6>[10013.910667] [3: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x3c (was 0x1ff, writing 0x101ed)
<6>[10013.910688] [3: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x38 (was 0x0, writing 0x0)
<6>[10013.910704] [3: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x34 (was 0x40, writing 0x40)
<6>[10013.910720] [3: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x30 (was 0x0, writing 0x0)
<6>[10013.910735] [3: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x2c (was 0x0, writing 0x0)
<6>[10013.910751] [3: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x28 (was 0x0, writing 0x0)
<6>[10013.910767] [3: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x24 (was 0x0, writing 0x0)
<6>[10013.910783] [3: system_server: 4318] pcieport 0001:00:00.0: restoring co

nfig space at offset 0x20 (was 0x1ff01c00, writing 0x1ff01c00)


<6>[10013.910798] [3: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x1c (was 0x0, writing 0x0)
<6>[10013.910814] [3: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x18 (was 0x10100, writing 0x10100)
<6>[10013.910830] [3: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x14 (was 0x0, writing 0x0)
<6>[10013.910845] [3: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x10 (was 0x0, writing 0x0)
<6>[10013.910861] [3: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0xc (was 0x10000, writing 0x10010)
<6>[10013.910882] [3: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x8 (was 0x1, writing 0x6040001)
<6>[10013.910903] [3: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x4 (was 0x100107, writing 0x100147)
<6>[10013.910924] [3: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x0 (was 0xa575144d, writing 0xa575144d)
<6>[10013.910981] [3: system_server: 4318] exynos-pcie 15660000.pcie1: exynos_
pcie_poweron, end of poweron, pcie state: 3
<4>[10013.910994] [3: system_server: 4318] dhdpcie_resume_dev: Enter
<6>[10013.911119] [3: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_DEVCTL:
2c10
<6>[10013.911212] [3: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_LNKCTL:
142
<6>[10013.911222] [3: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_SLTCTL:
0
<6>[10013.911232] [3: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_RTCTL:
0
<6>[10013.911369] [3: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_DEVCTL2
: 400
<6>[10013.911462] [3: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_LNKCTL2
: 1
<6>[10013.911471] [3: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_SLTCTL2
: 0
<6>[10013.911565] [3: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x3c (was 0x100, writing 0x1ed)
<6>[10013.911743] [3: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x38 (was 0x0, writing 0x0)
<6>[10013.911837] [3: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x34 (was 0x48, writing 0x48)
<6>[10013.912211] [3: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x30 (was 0x0, writing 0x0)
<6>[10013.912352] [0: kworker/u16:22:32545] usb 1-2: reset high-speed USB devic
e number 2 using s5p-ehci
<6>[10013.912611] [3: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x2c (was 0x77414e4, writing 0x77414e4)
<6>[10013.912986] [3: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x28 (was 0x0, writing 0x0)
<6>[10013.913360] [3: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x24 (was 0x0, writing 0x0)
<6>[10013.913734] [3: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x20 (was 0x0, writing 0x0)
<6>[10013.914109] [3: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x1c (was 0x0, writing 0x0)
<6>[10013.914484] [3: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x18 (was 0x4, writing 0x1c400004)
<6>[10013.914944] [3: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x18 (writing 0x1c400004)
<6>[10013.915038] [3: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x14 (was 0x0, writing 0x0)

<6>[10013.915132] [3: system_server: 4318] pcieh 0001:01:00.0: restoring confi


g space at offset 0x10 (was 0x4, writing 0x1c200004)
<6>[10013.915316] [3: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x10 (writing 0x1c200004)
<6>[10013.915410] [3: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0xc (was 0x0, writing 0x10)
<6>[10013.915606] [3: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x8 (was 0x2800003, writing 0x2800003)
<6>[10013.915740] [3: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x4 (was 0x100000, writing 0x100146)
<6>[10013.915918] [3: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x0 (was 0x43e914e4, writing 0x43e914e4)
<4>[10013.917192] [3: system_server: 4318] dhdpcie_send_mb_data: H2D_MB_DATA:
0x00000010
<4>[10013.917223] [3: system_server: 4318] dhdpcie_send_mb_data: send H2D_HOST
_D0_INFORM to dongle
<6>[10013.921258] [0:wl_event_handle: 5324] CFG80211-INFO2) wl_get_auth_assoc_s
tatus : event=3 status 5 reason 0
<6>[10013.921276] [0:wl_event_handle: 5324] CFG80211-INFO2) wl_get_auth_assoc_s
tatus : event=3 status 5 reason 0
<6>[10013.921291] [0:wl_event_handle: 5324] CFG80211-INFO2) wl_get_auth_assoc_s
tatus : event=3 status 5 reason 0
<7>[10013.933681] [0: kworker/u16:22:32545] usb 1-2: USB quirks for this device
: 100
<6>[10013.937887] [0: kworker/u16:22:32545] [CHKRA:5]>
<6>[10013.938283] [3: system_server: 4318] PM: resume of devices complete afte
r 157.509 msecs
<6>[10013.938292] I[0:
swapper/0:
0] [NACB:5]<
<6>[10013.938302] I[0:
swapper/0:
0] notification_available_cb: set lpa
handling to false
<6>[10013.938319] I[0:
swapper/0:
0] [CHKRA:5]>
<7>[10013.941439] [0:
kworker/0:0:13589] max77843_fg_write_temp: temperature
to (280, 0x1c00)
<6>[10013.941850] [0:
kworker/0:0:13589] max77843_fg_check_qrtable: QRTABLE2
0_REG(0x1603), QRTABLE30_REG(0x1005)
<7>[10013.942753] [3: system_server: 4318] PM: Finishing wakeup.
<6>[10013.943308] [0:
kworker/0:0:13589] power_supply battery: power_supply_
changed
<6>[10013.943331] [0:
kworker/0:0:13589] Skip monitor work(21, Vnow:4055mV,
Tbat:280)
<6>[10013.943433] [0:
kworker/0:0:13589] sec_bat_get_property cable type = 1
sleep_mode = 0
<6>[10013.943470] [0:
kworker/0:0:13589] sec_bat_get_property cable type = 1
<7>[10013.943572] [2:
khubd: 742] hub 1-0:1.0: state 7 ports 2 chg 00
04 evt 0000
<6>[10013.943618] [2:
khubd: 742] hub 1-0:1.0: port 2, status 0503, c
hange 0000, 480 Mb/s
<6>[10013.943742] [0:
kworker/0:0:13589] exynos-dwc3 15400000.usb: dwc3_exyn
os_runtime_suspend
<3>[10013.943839] [2:
mdm_helper: 3355] esoc REQ enginer waiting on request
<4>[10013.942767] [2:onic.tuiservice: 659] Restarting tasks ...
t-base-tui module: ioctl 0x80047402 <6>[10013.945332] [2:onic.tuiservice: 659]
TUI_IO_WAITCMD
<4>[10013.946075] [3: system_server: 4318] done.
<6>[10013.946310] [0: thread_hotplug:19219] frequency info : 1200000, prev_cmd
1, exe_cmd 4
<6>[10013.946331] [0: thread_hotplug:19219] lcd is on : 0, low power mode = 0,
dm_hotplug disable = 0
<6>[10013.946344] [0: thread_hotplug:19219] cluster1 cores hotplug out : 0

<6>[10013.946688] [1:
healthd: 3346] sec_bat_get_property cable type = 1
sleep_mode = 0
<12>[10013.947303] [1:
healthd: 3346] healthd: battery l=98 v=4055 t=28.
0 h=2 st=3 c=0 o=1 ca=-256 ct=0 ps=0 chg= 2016-11-17 16:20:42.676611519 UTC
<12>[10013.947341] [1:
healthd: 3346] healthd: battery l=98 v=4055 t=28.
0 h=2 st=3 c=0 o=1 ca=-256 ct=0 ps=0 chg= 2016-11-17 16:20:42.676611519 UTC hv=0
sec=0 chg=
<14>[10013.947368] [1:
healthd: 3346] healthd-android: healthd_mode_andr
oid_battery_update
<14>[10013.947394] [1:
healthd: 3346] BatteryPropertiesRegistrar: notify
Listeners : start
<14>[10013.947420] [1:
healthd: 3346] IBatteryPropertiesListener : batte
ryPropertiesChanged!
<14>[10013.947420] [1:
healthd: 3346] : BatteryPropertiesRegistrar: noti
fyListeners : done
<6>[10013.950618] [0: system_server: 4318] mdm_hsic_pm_notify_event: unblock r
equest
<6>[10013.950646] [0: system_server: 4318] request_active_lock_set
<6>[10013.950769] [3: system_server: 4318] PM: suspend exit 2016-11-17 16:20:4
2.680145061 UTC
<6>[10013.968966] [1: kworker/u16:31:32555] mdm_hsic_rpm_check
<6>[10013.968996] [1: kworker/u16:31:32555] mdm_hsic_rpm_restart
<6>[10014.064618] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10014.064863] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[10014.064916] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[10014.064973] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[10014.065206] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[10014.259157] [0:
kworker/0:1:25228] sync_system +
<6>[10014.259228] [0:
kworker/0:1:25228] sync_system <4>[10014.279012] [0:
kworker/0:0:13589] Emergency Sync complete
<7>[10014.454148] [0:
kworker/0:0:13589] usb 1-2: usb auto-suspend, wakeup 1
<6>[10014.455004] [1:
kworker/1:4:14113] MIF(418000): unset TMU_COLD: 612500
=> (set_volt: 575000, get_volt: 575000)
<6>[10014.456535] [1:
kworker/1:4:14113] DISP(100000): unset TMU_COLD: (set_
volt: 650000, get_volt: 650000)
<6>[10014.458774] [1:
kworker/1:4:14113] INT(100000): unset TMU_COLD: 687500
=> 650000
<6>[10014.458820] [1:
kworker/1:4:14113] tmu temperature state 1 to 0, cur_t
emp : 34
<7>[10014.465725] [0:
kworker/0:0:13589] hub 1-0:1.0: hub_suspend
<7>[10014.465799] [0:
kworker/0:0:13589] usb usb1: bus auto-suspend, wakeup
1
<7>[10014.465849] [0:
kworker/0:0:13589] s5p-ehci 15510000.usb: suspend root
hub
<3>[10014.466687] [0:
kworker/0:0:13589] s5p-ehci 15510000.usb: s5p_ehci_run
time_suspend
<7>[10014.478998] [0:
kworker/0:0:13589] samsung-usb2phy 15530000.usb2phy: s
amsung_usb2phy_runtime_suspend
<6>[10014.479071] [0:
kworker/0:0:13589] request_active_lock_release
<6>[10014.479135] [0:
kworker/0:0:13589] s5p_ehci_runtime_suspend: usage=0,
child=0
<6>[10014.479543] [3: system_server: 4318] PM: suspend entry 2016-11-17 16:20:
43.208909740 UTC
<6>[10014.479587] [3: system_server: 4318] PM: Syncing filesystems ... done.
<7>[10014.488356] [3: system_server: 4318] PM: Preparing system for mem sleep

<6>[10014.488667] [0: system_server: 4318] exynos_dm_hotplug_notifier, 958 : d


ynamic_hotplug CMD_SLEEP_PREPARE
<6>[10014.488716] [0: system_server: 4318] nr_sleep_prepare_cpus : 4, tmp_nr_s
leep_prepare_cpus : 5
<6>[10014.488788] [0: thread_hotplug:19219] stopped thread_hotplug
<6>[10014.499867] [2: system_server: 4318] MIF(418000): set TMU_COLD: 575000 =
> (set_volt: 612500, get_volt: 612500)
<6>[10014.500951] [2: system_server: 4318] DISP(100000): set TMU_COLD: 650000
=> (set_volt: 687500, get_volt: 687500)
<6>[10014.502330] [2: system_server: 4318] INT(100000): set TMU_COLD: 650000 =
> 687500
<6>[10014.502378] [2: system_server: 4318] tmu temperature state 0 to 1
<6>[10014.502431] [2: system_server: 4318] mdm_hsic_pm_notify_event: block req
uest
<3>[10014.503991] [0:
mdm_helper: 3355] esoc REQ engine released from wait
<4>[10014.503172] [2: system_server: 4318] Freezing user space processes ... (
elapsed 0.008 seconds) done.
<4>[10014.511960] [2: system_server: 4318] Freezing remaining freezable tasks
... (elapsed 0.008 seconds) done.
<7>[10014.520960] [2: system_server: 4318] PM: Entering mem sleep
<4>[10014.521000] [2: system_server: 4318] Suspending console(s) (use no_conso
le_suspend to debug)
<6>[10014.523230] [2: system_server: 4318] exynos-dwc3 15400000.usb: dwc3_exyn
os_runtime_resume
<6>[10014.525954] [1: kworker/u16:31:32555] [mhi_suspend] [mhi_suspend]
<6>[10014.525998] [1: kworker/u16:31:32555] [mhi_suspend] Entered, sys state 2,
MHI state 4
<4>[10014.526024] [2: system_server: 4318] dhdpcie_send_mb_data: H2D_MB_DATA:
0x00000001
<6>[10014.526053] [1: kworker/u16:31:32555] [mhi_initiate_m3] Entered MHI state
4, Pending M0 0 Pending M3 0
<6>[10014.526084] [1: kworker/u16:31:32555] [mhi_initiate_m3] Triggering wake o
ut of M2
<4>[10014.526278] [2: system_server: 4318] dhdpcie_send_mb_data: send H2D_HOST
_D3_INFORM to dongle
<4>[10014.527460] I[0:
swapper/0:
0] D2H_MB_DATA: 0x00000001
<4>[10014.527498] I[0:
swapper/0:
0] dhdpcie_handle_mb_data D2H_MB_DATA:
Received D3 ACK
<6>[10014.527955] [1: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26480
<6>[10014.527998] [1: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10014.528134] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[10014.528181] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[10014.528211] [2:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work was
cancelled
<4>[10014.528405] [0: system_server: 4318] dhdpcie_send_mb_data: H2D_MB_DATA:
0x00000008
<4>[10014.528773] [0: system_server: 4318] dhdpcie_send_mb_data: send H2D_HOST
_D0_INFORM_IN_USE to dongle
<4>[10014.529370] [0: system_server: 4318] dhdpcie_suspend_dev: Enter
<6>[10014.529802] [0: system_server: 4318] pcieh 0001:01:00.0: reg offset: 0:
43e914e4
<6>[10014.529995] [0: system_server: 4318] pcieh 0001:01:00.0: reg offset: 4:
100146
<6>[10014.530207] [0: system_server: 4318] pcieh 0001:01:00.0: reg offset: 8:
2800003
<6>[10014.530415] [0: system_server: 4318] pcieh 0001:01:00.0: reg offset: 12:
10

<6>[10014.530623] [0: system_server: 4318]


1c200004
<6>[10014.530831] [0: system_server: 4318]
0
<6>[10014.531039] [0: system_server: 4318]
1c400004
<6>[10014.531244] [0: system_server: 4318]
0
<6>[10014.531455] [0: system_server: 4318]
0
<6>[10014.531663] [0: system_server: 4318]
0
<6>[10014.531872] [0: system_server: 4318]
0
<6>[10014.532078] [0: system_server: 4318]
77414e4
<6>[10014.532329] [0: system_server: 4318]
0
<6>[10014.532496] [2:MHI_STATE_THREA: 4605]
<6>[10014.532522] [0: system_server: 4318]
48
<6>[10014.532547] [1: kworker/u16:31:32555]
r, timer was active
<6>[10014.532719] [0: system_server: 4318]
0
<6>[10014.532768] [1: kworker/u16:31:32555]
mpletion.
<6>[10014.532931] [0: system_server: 4318]
1ed
<6>[10014.533140] [0: system_server: 4318]
2c10
<6>[10014.533348] [0: system_server: 4318]
142
<6>[10014.533376] [0: system_server: 4318]
0
<6>[10014.533404] [0: system_server: 4318]
0
<6>[10014.533556] [0: system_server: 4318]
: 400
<6>[10014.533819] [0: system_server: 4318]
: 1
<6>[10014.533846] [0: system_server: 4318]
: 0
<6>[10014.536533] [0: system_server: 4318]
device_vendor_id reg : 43e914e4
<6>[10014.536738] [0: system_server: 4318]
PMCSR reg value: 4108
<6>[10014.536947] [0: system_server: 4318]
PMCSR reg value: 410b
<6>[10014.537122] [0: system_server: 4318]
device_vendor_id reg : 43e914e4
<6>[10014.545774] [0: MHI_EV_THREAD: 4604]
ceived ring 0x0
<6>[10014.545844] [2:MHI_STATE_THREA: 4605]
ng to 5
<6>[10014.545877] [2:MHI_STATE_THREA: 4605]
M3 state transition
<6>[10014.545955] [1: kworker/u16:31:32555]
eived
<6>[10014.545998] [1: kworker/u16:31:32555]

pcieh 0001:01:00.0: reg offset: 16:


pcieh 0001:01:00.0: reg offset: 20:
pcieh 0001:01:00.0: reg offset: 24:
pcieh 0001:01:00.0: reg offset: 28:
pcieh 0001:01:00.0: reg offset: 32:
pcieh 0001:01:00.0: reg offset: 36:
pcieh 0001:01:00.0: reg offset: 40:
pcieh 0001:01:00.0: reg offset: 44:
pcieh 0001:01:00.0: reg offset: 48:
[process_M0_transition] Exited
pcieh 0001:01:00.0: reg offset: 52:
[mhi_initiate_m3] Cancelled M1 time
pcieh 0001:01:00.0: reg offset: 56:
[mhi_initiate_m3] Waiting for M3 co
pcieh 0001:01:00.0: reg offset: 60:
pcieh 0001:01:00.0: PCI_EXP_DEVCTL:
pcieh 0001:01:00.0: PCI_EXP_LNKCTL:
pcieh 0001:01:00.0: PCI_EXP_SLTCTL:
pcieh 0001:01:00.0: PCI_EXP_RTCTL:
pcieh 0001:01:00.0: PCI_EXP_DEVCTL2
pcieh 0001:01:00.0: PCI_EXP_LNKCTL2
pcieh 0001:01:00.0: PCI_EXP_SLTCTL2
pcieh 0001:01:00.0: [debug] step 1,
pcieh 0001:01:00.0: [debug] step 2,
pcieh 0001:01:00.0: [debug] step 3,
pcieh 0001:01:00.0: [debug] step 4,
[mhi_process_event_ring] MHI STE re
[process_stt_work_item] Transitioni
[process_M3_transition] Processing
[mhi_initiate_m3] M3 completion rec
[mhi_turn_off_pcie_link] Entered...

<6>[10014.549330] [0: system_server: 4318] pcieh 0001:01:00.0: [debug] pmcsr r


eg : 410b dev->current_state : 0
<6>[10014.549502] [0: system_server: 4318] pcieh 0001:01:00.0: [debug] device_
vendor_id reg : 43e914e4
<6>[10014.549567] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
0: a575144d
<6>[10014.549603] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
4: 100147
<6>[10014.549638] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
8: 6040001
<6>[10014.549802] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
12: 10010
<6>[10014.549837] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
16: 0
<6>[10014.549871] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
20: 0
<6>[10014.549906] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
24: 10100
<6>[10014.549940] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
28: 0
<6>[10014.549975] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
32: 1ff01c00
<6>[10014.550141] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
36: 0
<6>[10014.550176] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
40: 0
<6>[10014.550210] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
44: 0
<6>[10014.550244] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
48: 0
<6>[10014.550279] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
52: 40
<6>[10014.550313] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
56: 0
<6>[10014.550480] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
60: 101ed
<6>[10014.550515] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL: 2010
<6>[10014.550550] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL: 42
<6>[10014.550577] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL: 0
<6>[10014.550610] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_RTCT
L: 0
<6>[10014.550643] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL2: 400
<6>[10014.550676] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL2: 1
<6>[10014.550705] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL2: 0
<6>[10014.550845] [0: system_server: 4318] exynos-pcie 15660000.pcie1: ack mes
sage is ok
<6>[10014.550875] [0: system_server: 4318] exynos-pcie 15660000.pcie1: receive
d Enter_L23_READY DLLP packet
<6>[10014.550914] [0: system_server: 4318] exynos-pcie 15660000.pcie1: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[10014.551075] [0: system_server: 4318] exynos-pcie 15660000.pcie1: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[10014.556153] [0: system_server: 4318] voltage(793750) + volt_offset(37500
) is bigger than max_volt(793750)

<6>[10014.556205] [0: system_server: 4318] voltage(793750) + volt_offset(37500


) is bigger than max_volt(793750)
<6>[10014.557412] [0: system_server: 4318] DEVFREQ(MIF): suspend voltage(79375
0 793750)
<6>[10014.559096] [1: kworker/u16:31:32555] mhi 0000:01:00.0: [debug] pmcsr reg
: b dev->current_state : 0
<6>[10014.559204] [1: kworker/u16:31:32555] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[10014.559285] [1: kworker/u16:31:32555] exynos-pcie 10ee0000.pcie0: ack mes
sage is ok
<6>[10014.559313] [1: kworker/u16:31:32555] exynos-pcie 10ee0000.pcie0: receive
d Enter_L23_READY DLLP packet
<6>[10014.559348] [1: kworker/u16:31:32555] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[10014.559459] [1: kworker/u16:31:32555] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[10014.560155] [0: system_server: 4318] s2m_rtc_update: RTC_UPDATE_REGISTER
check : 0x00
<6>[10014.560358] [0: system_server: 4318] s2m-rtc s2m-rtc: s2m_rtc_read_time:
2016-11-17 16:20:43(0x10)PM
<5>[10014.560766] [0: system_server: 4318] sd 0:0:0:0: [sda] Synchronizing SCS
I cache
<6>[10014.566423] [0: system_server: 4318] s2m_rtc_update: RTC_UPDATE_REGISTER
check : 0x00
<6>[10014.566631] [0: system_server: 4318] s2m-rtc s2m-rtc: s2m_rtc_read_time:
2016-11-17 16:20:43(0x10)PM
<6>[10014.567932] [0: system_server: 4318] s2m_rtc_update: RTC_UPDATE_REGISTER
check : 0x00
<6>[10014.568128] [0: system_server: 4318] s2m-rtc s2m-rtc: s2m_rtc_read_time:
2016-11-17 16:20:43(0x10)PM
<6>[10014.568171] [0: system_server: 4318] s2m-rtc s2m-rtc: s2m_rtc_set_alarm:
2016-11-17 16:25:29(0x10)PM
<6>[10014.569593] [0: system_server: 4318] s2m_rtc_update: RTC_UPDATE_REGISTER
check : 0x00
<6>[10014.571000] [0: system_server: 4318] s2m_rtc_update: RTC_UPDATE_REGISTER
check : 0x00
<6>[10014.571611] [0: system_server: 4318] max86900_pm_suspend
<6>[10014.571985] [0: system_server: 4318] wake enabled for irq 7
<2>[10014.572152] [0: system_server: 4318] --------Si47xx i2c driver Si47xx_su
spend called
<2>[10014.572176] [0: system_server: 4318] Si47xx_suspend: device not supporte
d
<6>[10014.572268] [0: system_server: 4318] [VIB] max77843_haptic_suspend
<6>[10014.572321] [0: system_server: 4318] [VIB] max77843_haptic_i2c 0
<6>[10014.573381] [0: system_server: 4318] wake enabled for irq 4
<6>[10014.573560] [0: system_server: 4318] vfsspi_regulator_onoff: ocp off, sm
c ret = 0
<6>[10014.573583] [0: system_server: 4318] vfsspi_regulator_onoff: off
<6>[10014.573619] [0: system_server: 4318] vfsspi_pm_suspend
<6>[10014.573693] [0: system_server: 4318] [SSP] ssp_suspend:
<6>[10014.580356] [0: system_server: 4318] [SSP] ssp_send_cmd: command 0xd4 0
<6>[10014.580648] [0: system_server: 4318] mst_ldo_device_suspend
<6>[10014.580721] [0: system_server: 4318] MST_LDO_DRV]]] suspend
<6>[10014.580739] [0: system_server: 4318] MST_LDO_DRV]]] suspend success afte
r smc : 122f122
<6>[10014.589443] [1: kworker/u16:31:32555] [mhi_turn_off_pcie_link] Exited...
<6>[10014.619116] [0: system_server: 4318] [MAX98505_DEBUG] max98505_suspend:
enter
<6>[10014.619248] [0: system_server: 4318] pacific-audio sound.34: pacific_sus
pend_post : set AIF1 port slave

<6>[10014.619340] [0: system_server: 4318] wake enabled for irq 577


<6>[10014.619366] [0: system_server: 4318] wake enabled for irq 580
<4>[10014.619409] [0: system_server: 4318] certify_hall_suspend start
<4>[10014.619437] [0: system_server: 4318] [keys] certify_hall_suspend certify
_status : 0 (detach)
<4>[10014.619471] [0: system_server: 4318] hall_suspend start
<4>[10014.619496] [0: system_server: 4318] [keys] hall_suspend flip_status : 1
(open)
<6>[10014.631640] [0: system_server: 4318] [MIF] usb_phy_prepare_shutdown
<6>[10014.631672] [0: system_server: 4318] dev rdy val = 1
<6>[10014.631694] [0: system_server: 4318] set_host_stat:set host port power s
tatus to [0]
<6>[10014.661314] [1: system_server: 4318] wait_dev_pwr_stat:[PWR OFF]...
<6>[10014.670242] I[0:
swapper/0:
0] mdm_device_ready_irq_handler, irq:
host ready val : 00000000
<6>[10014.670270] I[0:
swapper/0:
0] mdm_device_ready_irq_handler, irq:
dev ready val : 00000000
<6>[10014.691297] [1: system_server: 4318] done
<7>[10014.691361] [1: system_server: 4318] samsung-usb2phy 15530000.usb2phy: s
amsung_usb2phy_shutdown: End of setting for shutdown
<6>[10014.691688] [1: system_server: 4318] spi suspend is handled in device su
spend, dma mode = 0, bus_num = 3
<6>[10014.691726] [1: system_server: 4318] spi suspend is handled in device su
spend, dma mode = 0, bus_num = 1
<6>[10014.691881] [1: system_server: 4318] 3s3c24xx_serial_shutdown: port=4 res
et
<6>[10014.693260] [1: system_server: 4318] PM: suspend of devices complete aft
er 168.341 msecs
<6>[10014.693286] [1: system_server: 4318] ---Enabled regulators--<6>[10014.693328] [1: system_server: 4318] LDO1: 1200000uV, 0xffffffea mode, n
ull
<6>[10014.695484] [0: system_server: 4318] VDDIO_1.8V_COMP: 1800000uV, 0xfffff
fea mode, null
<6>[10014.696474] [0: system_server: 4318] VDDD_RET_1.0V_COMP: 700000uV, 0xfff
fffea mode, null
<6>[10014.698503] [0: system_server: 4318] VDD20_1P8_AP: 1800000uV, 0xffffffea
mode, null
<6>[10014.699251] [0: system_server: 4318] VCC_1.8V_CODEC_PMIC: 1800000uV, 0xf
fffffea mode, spi0.0-DBVDD1, spi0.0-AVDD, regulator.47-SUPPLY
<6>[10014.701028] [0: system_server: 4318] regulator-dummy: -22uV, 0xffffffea
mode, null
<6>[10014.701056] [0: system_server: 4318] Always On regulator count :10 [VDD2
2_1P1_2MIC][vdd_ldo8][vdd_mldo][vdd_lldo][vdd_disp_cam0][vdd_int][vdd_apollo][vd
d_atlas][vdd_mif][safeout1_range]
<6>[10014.701079] [0: system_server: 4318] ---Enabled regulator count: 16--<6>[10014.703399] [0: system_server: 4318] PM: late suspend of devices complet
e after 2.288 msecs
<6>[10014.704480] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
0: ffffffff
<6>[10014.704511] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
4: ffffffff
<6>[10014.704540] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
8: ffffffff
<6>[10014.704569] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
12: ffffffff
<6>[10014.704597] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
16: ffffffff
<6>[10014.704626] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
20: ffffffff
<6>[10014.704654] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:

24: ffffffff
<6>[10014.704683] [0: system_server:
28: ffffffff
<6>[10014.704711] [0: system_server:
32: ffffffff
<6>[10014.704740] [0: system_server:
36: ffffffff
<6>[10014.704768] [0: system_server:
40: ffffffff
<6>[10014.704797] [0: system_server:
44: ffffffff
<6>[10014.704825] [0: system_server:
48: ffffffff
<6>[10014.704854] [0: system_server:
52: ffffffff
<6>[10014.704883] [0: system_server:
56: ffffffff
<6>[10014.704912] [0: system_server:
60: ffffffff
<6>[10014.704940] [0: system_server:
TL: 0
<6>[10014.704968] [0: system_server:
TL: 0
<6>[10014.704995] [0: system_server:
TL: 0
<6>[10014.705022] [0: system_server:
L: 0
<6>[10014.705050] [0: system_server:
TL2: 0
<6>[10014.705078] [0: system_server:
TL2: 0
<6>[10014.705104] [0: system_server:
TL2: 0
<6>[10014.706394] [0: system_server:
eady off
<6>[10014.706428] [0: system_server:
eady off
<6>[10014.706622] [0: system_server:
oirq, dma mode = 1, bus_num = 4
<6>[10014.706660] [0: system_server:
oirq, dma mode = 1, bus_num = 0
<6>[10014.706955] [0: system_server:
te after 3.523 msecs
<4>[10014.706981] [0: system_server:
<6>[10014.707408] [0: system_server:
0, active_cpu=0x00000001
<6>[10014.707513] [1:
mc_fastcall:
<4>[10014.708859] [1:
migration/1:
ed
<4>[10014.708885] [1:
migration/1:
<5>[10014.710462] [2: system_server:
<4>[10014.712843] [2:
migration/2:
<5>[10014.714322] [0: system_server:
<4>[10014.716819] [3:
migration/3:
<5>[10014.718313] [0: system_server:
<4>[10014.720232] [4:
migration/4:
<5>[10014.720916] [0: system_server:
<6>[10014.721626] [0: system_server:
<6>[10014.721626] [0: system_server:
<6>[10014.721626] [0: system_server:

4318] pcieport 0001:00:00.0: reg offset:


4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
4318] pcieport 0001:00:00.0: PCI_EXP_RTCT
4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
4318] exynos-pcie 15660000.pcie1: RC1 alr
4318] exynos-pcie 10ee0000.pcie0: RC0 alr
4318] spi suspend is handled in suspend_n
4318] spi suspend is handled in suspend_n
4318] PM: noirq suspend of devices comple
4318] Disabling non-boot CPUs ...
4318] MobiCore mcd: <- core_num=0x0000000
1747] MobiCore mcd: CoreSwap ok 1 -> 0
13] migrate_irqs: 25 callbacks suppress
13]
4318]
18]
4318]
23]
4318]
28]
4318]
4318]
4318]
4318]

IRQ149 no longer affine to CPU1


CPU1: shutdown
IRQ150 no longer affine to CPU2
CPU2: shutdown
IRQ151 no longer affine to CPU3
CPU3: shutdown
IRQ152 no longer affine to CPU4
CPU4: shutdown
[MIF] 1552000Khz
WAKEUP_STAT: 0x80000001
EINT_PEND: 0x00, 0x40 0x08, 0x00

<6>[10014.721626] [0: system_server: 4318] Resume caused by IRQ 586, dhdpcie_h


ost_wake
<6>[10014.721626] [0: system_server: 4318] Suspended for 0.000 seconds
<6>[10014.721775] [0: system_server: 4318] Enabling non-boot CPUs ...
<4>[10014.721944] [1:
swapper/1:
0] CPU1: Booted secondary processor
<6>[10014.722669] [0: system_server: 4318] MobiCore mcd: <- core_num=0x0000000
1, active_cpu=0x00000000
<6>[10014.722718] [0:
mc_fastcall: 1747] MobiCore mcd: CoreSwap ok 0 -> 1
<6>[10014.722756] [0: system_server: 4318] CPU1 is up
<4>[10014.722894] [2:
swapper/2:
0] CPU2: Booted secondary processor
<6>[10014.723462] [0: system_server: 4318] CPU2 is up
<4>[10014.723613] [3:
swapper/3:
0] CPU3: Booted secondary processor
<6>[10014.724164] [0: system_server: 4318] CPU3 is up
<4>[10014.724390] [4:
swapper/4:
0] CPU4: Booted secondary processor
<6>[10014.725091] [0: system_server: 4318] CPU4 is up
<6>[10014.725295] [0: system_server: 4318] spi resume is handled in resume_noi
rq, dma mode = 1, bus_num = 0
<6>[10014.725354] [0: system_server: 4318] spi resume is handled in resume_noi
rq, dma mode = 1, bus_num = 4
<6>[10014.738911] [2: system_server: 4318] pcieport 0001:00:00.0: [debug] pmcs
r reg : ffff dev->current_state : 3
<6>[10014.738924] [2: system_server: 4318] pcieport 0001:00:00.0: [debug] devi
ce_vendor_id reg : ffffffff
<4>[10014.738933] [2: system_server: 4318] pci_raw_set_power_state: 2 callback
s suppressed
<6>[10014.738944] [2: system_server: 4318] pcieport 0001:00:00.0: Refused to c
hange power state, currently in D3, PCI_PM_CTRL=ffff
<6>[10014.738956] [2: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL: 0
<6>[10014.738966] [2: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL: 0
<6>[10014.738975] [2: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL: 0
<6>[10014.738984] [2: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_RTCT
L: 0
<6>[10014.738995] [2: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL2: 0
<6>[10014.739004] [2: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL2: 0
<6>[10014.739013] [2: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL2: 0
<6>[10014.739024] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x3c (was 0xffffffff, writing 0xffffffff)
<6>[10014.739036] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x38 (was 0xffffffff, writing 0xffffffff)
<6>[10014.739047] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x34 (was 0xffffffff, writing 0xffffffff)
<6>[10014.739058] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x30 (was 0xffffffff, writing 0xffffffff)
<6>[10014.739069] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x2c (was 0xffffffff, writing 0xffffffff)
<6>[10014.739079] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x28 (was 0xffffffff, writing 0xffffffff)
<6>[10014.739090] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x24 (was 0xffffffff, writing 0xffffffff)
<6>[10014.739101] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x20 (was 0xffffffff, writing 0xffffffff)
<6>[10014.739112] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x1c (was 0xffffffff, writing 0xffffffff)
<6>[10014.739123] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co

nfig space at offset 0x18 (was 0xffffffff, writing 0xffffffff)


<6>[10014.739133] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x14 (was 0xffffffff, writing 0xffffffff)
<6>[10014.739144] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x10 (was 0xffffffff, writing 0xffffffff)
<6>[10014.739155] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0xc (was 0xffffffff, writing 0xffffffff)
<6>[10014.739166] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x8 (was 0xffffffff, writing 0xffffffff)
<6>[10014.739177] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x4 (was 0xffffffff, writing 0xffffffff)
<6>[10014.739188] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x0 (was 0xffffffff, writing 0xffffffff)
<6>[10014.739209] [2: system_server: 4318] pcieh 0001:01:00.0: [debug] step 1,
device_vendor_id reg : ffffffff
<6>[10014.739219] [2: system_server: 4318] pcieh 0001:01:00.0: [debug] step 2,
PMCSR reg value: ffff
<6>[10014.739229] [2: system_server: 4318] pcieh 0001:01:00.0: [debug] step 3,
PMCSR reg value: 0
<6>[10014.739239] [2: system_server: 4318] pcieh 0001:01:00.0: [debug] step 4,
device_vendor_id reg : ffffffff
<6>[10014.752221] [2: system_server: 4318] pcieh 0001:01:00.0: [debug] pmcsr r
eg : ffff dev->current_state : 3
<6>[10014.752232] [2: system_server: 4318] pcieh 0001:01:00.0: [debug] device_
vendor_id reg : ffffffff
<6>[10014.752243] [2: system_server: 4318] pcieh 0001:01:00.0: Refused to chan
ge power state, currently in D3, PCI_PM_CTRL=ffff
<6>[10014.752255] [2: system_server: 4318] exynos-pcie 15660000.pcie1: PCIE li
nk state is 0
<6>[10014.752265] [2: system_server: 4318] pcieh 0001:01:00.0: [debug] setp 5,
PMCSR reg value: ffff
<6>[10014.752275] [2: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_DEVCTL:
2c10
<6>[10014.752285] [2: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_LNKCTL:
142
<6>[10014.752294] [2: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_SLTCTL:
0
<6>[10014.752303] [2: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_RTCTL:
0
<6>[10014.752312] [2: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_DEVCTL2
: 400
<6>[10014.752321] [2: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_LNKCTL2
: 1
<6>[10014.752330] [2: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_SLTCTL2
: 0
<6>[10014.752340] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x3c (was 0xffffffff, writing 0x1ed)
<6>[10014.752352] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x38 (was 0xffffffff, writing 0x0)
<6>[10014.752362] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x34 (was 0xffffffff, writing 0x48)
<6>[10014.752373] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x30 (was 0xffffffff, writing 0x0)
<6>[10014.752384] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x2c (was 0xffffffff, writing 0x77414e4)
<6>[10014.752395] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x28 (was 0xffffffff, writing 0x0)
<6>[10014.752406] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x24 (was 0xffffffff, writing 0x0)
<6>[10014.782376] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi

g space at offset 0x20 (was 0xffffffff, writing 0x0)


<6>[10014.812345] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x1c (was 0xffffffff, writing 0x0)
<6>[10014.842314] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x18 (was 0xffffffff, writing 0x1c400004)
<6>[10014.872283] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x14 (was 0xffffffff, writing 0x0)
<6>[10014.902252] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x10 (was 0xffffffff, writing 0x1c200004)
<6>[10014.922207] I[0:
swapper/0:
0] CFG80211-INFO2) wl_roam_timeout : r
oam timer expired
<6>[10014.932221] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0xc (was 0xffffffff, writing 0x10)
<6>[10014.932232] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x8 (was 0xffffffff, writing 0x2800003)
<6>[10014.932243] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x4 (was 0xffffffff, writing 0x100146)
<6>[10014.932254] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x0 (was 0xffffffff, writing 0x43e914e4)
<6>[10014.945555] [2: system_server: 4318] pcieport 0000:00:00.0: [debug] pmcs
r reg : ffff dev->current_state : 3
<6>[10014.945565] [2: system_server: 4318] pcieport 0000:00:00.0: [debug] devi
ce_vendor_id reg : ffffffff
<6>[10014.945576] [2: system_server: 4318] pcieport 0000:00:00.0: Refused to c
hange power state, currently in D3, PCI_PM_CTRL=ffff
<6>[10014.958882] [2: system_server: 4318] mhi 0000:01:00.0: [debug] pmcsr reg
: ffff dev->current_state : 3
<6>[10014.958893] [2: system_server: 4318] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : ffffffff
<6>[10014.958903] [2: system_server: 4318] mhi 0000:01:00.0: Refused to change
power state, currently in D3, PCI_PM_CTRL=ffff
<6>[10014.959022] [2: system_server: 4318] PM: noirq resume of devices complet
e after 233.917 msecs
<6>[10014.959502] [2: system_server: 4318] exynos-mailbox 11240000.mailbox: Lo
ading APM firmware ...
<6>[10014.959671] [2: system_server: 4318] OK
<6>[10014.960768] [2: system_server: 4318] PM: early resume of devices complet
e after 1.371 msecs
<6>[10014.961003] [1: kworker/u16:0: 4939] [mhi_resume] [mhi_resume]
<6>[10014.961019] [1: kworker/u16:0: 4939] [mhi_initiate_m0] Entered MHI state
5, Pending M0 0 Pending M3 0
<6>[10014.961030] [1: kworker/u16:0: 4939] [mhi_initiate_m0] Waiting for M0 M1
or M3. Currently 5...
<6>[10014.961040] [1: kworker/u16:0: 4939] [mhi_initiate_m0] Wait complete sta
te: 5
<6>[10014.961050] [1: kworker/u16:0: 4939] [mhi_turn_on_pcie_link] Entered...
<6>[10014.961065] [1: kworker/u16:0: 4939] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, start of poweron, pcie state: 0
<6>[10014.961264] [2: system_server: 4318] s3c2410_wdt: watchdog enabled
<6>[10014.964701] [3: system_server: 4318] spi resume is handled in device res
ume, dma mode = 0, bus_num = 1
<6>[10014.964736] [3: system_server: 4318] spi resume is handled in device res
ume, dma mode = 0, bus_num = 3
<7>[10014.964970] [3: system_server: 4318] samsung-usb2phy 15530000.usb2phy: C
an't configure specified phy mode
<7>[10014.964988] [3: system_server: 4318] samsung-usb2phy 15530000.usb2phy: e
nd of samsung_usb2phy_init
<7>[10014.965003] [3: system_server: 4318] samsung-usb2phy 15530000.usb2phy: s
amsung_usb2phy_runtime_resume
<4>[10014.965024] [3: system_server: 4318] usb usb1: root hub lost power or wa

s reset
<7>[10014.965046] [3: system_server: 4318] s5p-ehci 15510000.usb: reset comman
d 0080b02 park=3 ithresh=8 period=1024 Reset HALT
<6>[10014.965063] [3: system_server: 4318] dev rdy val = 0
<6>[10014.965070] [3: system_server: 4318] set_host_stat:set host port power s
tatus to [1]
<6>[10014.965082] [3: system_server: 4318] wait_dev_pwr_stat:[PWR ON]...
<6>[10014.986691] I[0:
swapper/0:
0] mdm_device_ready_irq_handler, irq:
host ready val : 00000001
<6>[10014.986701] I[0:
swapper/0:
0] mdm_device_ready_irq_handler, irq:
dev ready val : 00000001
<6>[10014.995043] [3: system_server: 4318] done
<7>[10014.995085] [0: kworker/u16:17:32538] usb usb1: usb resume
<7>[10014.995099] [0: kworker/u16:17:32538] s5p-ehci 15510000.usb: resume root
hub after power loss
<7>[10014.995111] [0: kworker/u16:17:32538] s5p-ehci 15510000.usb: LRESET 0
<7>[10014.995134] [0: kworker/u16:17:32538] hub 1-0:1.0: hub_reset_resume
<7>[10014.995145] [0: kworker/u16:17:32538] hub 1-0:1.0: enabling power on all
ports
<6>[10014.999240] [1: kworker/u16:0: 4939] exynos-pcie 10ee0000.pcie0: D state
: 0, 36d600
<6>[10015.011508] [1: kworker/u16:0: 4939] exynos-pcie 10ee0000.pcie0: exynos_
pcie_reset: Link up : 0x03885011
<6>[10015.011741] [1: kworker/u16:0: 4939] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, end of poweron, pcie state: 3
<6>[10015.022427] [1: kworker/u16:0: 4939] mhi 0000:01:00.0: [debug] pmcsr reg
: 8 dev->current_state : 3
<6>[10015.022603] [1: kworker/u16:0: 4939] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[10015.022614] [1: kworker/u16:0: 4939] exynos-pcie 10ee0000.pcie0: Recover
y for the link of RC0
<6>[10015.022625] [1: kworker/u16:0: 4939] exynos-pcie 10ee0000.pcie0: Recover
config space of RC0 and its EP
<6>[10015.022635] [1: kworker/u16:0: 4939] exynos-pcie 10ee0000.pcie0: Recover
RC0
<6>[10015.022664] [1: kworker/u16:0: 4939] exynos-pcie 10ee0000.pcie0: Recover
EP of RC0
<6>[10015.023067] [1: kworker/u16:0: 4939] exynos-pcie 10ee0000.pcie0: Refresh
ing the saved config space in PCI framework for RC0 and its EP
<6>[10015.028324] [1: kworker/u16:0: 4939] [mhi_turn_on_pcie_link] Exited...
<6>[10015.028337] [1: kworker/u16:0: 4939] [mhi_initiate_m0] Setting M0 ...
<6>[10015.028487] [1: kworker/u16:0: 4939] [mhi_initiate_m0] Exited...
<7>[10015.028910] [0: kworker/u16:17:32538] s5p-ehci 15510000.usb: GetStatus po
rt:2 status 001803 0 ACK POWER sig=j CSC CONNECT
<7>[10015.028925] [0: kworker/u16:17:32538] hub 1-0:1.0: port 2: status 0501 ch
ange 0001
<7>[10015.028994] [0: kworker/u16:11:32455] usb 1-2: finish reset-resume
<6>[10015.032373] [0: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 5 link 1, ring type 2, index 0 db 0x5fa264a0
<6>[10015.032387] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10015.032418] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[10015.032430] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[10015.032441] [2:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[10015.032935] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[10015.032944] [1: kworker/u16:0: 4939] [mhi_resume] Wait complete state: 2
<4>[10015.044153] [0: system_server: 4318] ufs_get_device_info: UNIQUE NUMBER
= 02157df271b5cb31 , LT: 0x22

<6>[10015.047868] [0: system_server: 4318] exynos-ufs 15570000.ufs: Power mode


change(0): M(1)G(2)L(2)HS-series(2)
<4>[10015.048212] [0: system_server: 4318] hall_resume start
<4>[10015.048223] [0: system_server: 4318] [keys] hall_resume flip_status : 1
(open)
<4>[10015.048239] [0: system_server: 4318] certify_hall_resume start
<4>[10015.048248] [0: system_server: 4318] [keys] certify_hall_resume certify_
status : 0 (detach)
<6>[10015.048267] [0: system_server: 4318] wake disabled for irq 577
<6>[10015.048276] [0: system_server: 4318] wake disabled for irq 580
<6>[10015.048407] [0:
kworker/0:0:13589] [MAX98505_DEBUG] max98505_resume: e
nter
<6>[10015.048969] [1: system_server: 4318] mst_ldo_device_resume
<6>[10015.049004] [1: system_server: 4318] MST_LDO_DRV]]] resume
<6>[10015.049010] [1: system_server: 4318] MST_LDO_DRV]]] resume success after
smc : 122f122
<6>[10015.050623] [0: system_server: 4318] [SSP] ssp_resume:
<6>[10015.057818] [2: system_server: 4318] [SSP] ssp_send_cmd: command 0xd3 0
<3>[10015.057847] [2: system_server: 4318] vfsspi_wakeup_daemon send signal fa
iled by wakeup(0)
<6>[10015.057879] [2: system_server: 4318] vfsspi_regulator_onoff: ocp on, smc
ret = 0
<6>[10015.060932] [2: system_server: 4318] vfsspi_regulator_onoff: on
<6>[10015.060947] [2: system_server: 4318] vfsspi_pm_resume
<6>[10015.060996] [2: system_server: 4318] wake disabled for irq 4
<6>[10015.061030] [2: system_server: 4318] [VIB] max77843_haptic_resume
<2>[10015.061045] [2: system_server: 4318] Si47xx_resume: device not supported
<6>[10015.061065] [2: system_server: 4318] wake disabled for irq 7
<6>[10015.061270] [2: system_server: 4318] max86900_pm_resume
<6>[10015.063117] [2: system_server: 4318] s2m_rtc_update: RTC_UPDATE_REGISTER
check : 0x00
<6>[10015.063253] [2: system_server: 4318] s2m-rtc s2m-rtc: s2m_rtc_read_time:
2016-11-17 16:20:58(0x10)PM
<6>[10015.067668] [2: system_server: 4318] exynos-pcie 15660000.pcie1: exynos_
pcie_poweron, start of poweron, pcie state: 0
<7>[10015.082526] [1: kworker/u16:11:32455] s5p-ehci 15510000.usb: port 2 reset
complete, port enabled
<7>[10015.082555] [1: kworker/u16:11:32455] s5p-ehci 15510000.usb: GetStatus po
rt:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
<6>[10015.088537] [2: system_server: 4318] exynos-pcie 15660000.pcie1: D state
: 0, e5bd00
<6>[10015.089816] [2: system_server: 4318] exynos-pcie 15660000.pcie1: exynos_
pcie_reset: Link up : 0x0389ff11
<6>[10015.090132] [2: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL: 2010
<6>[10015.090147] [2: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL: 42
<6>[10015.090158] [2: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL: 0
<6>[10015.090174] [2: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_RTCT
L: 0
<6>[10015.090191] [2: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL2: 400
<6>[10015.090205] [2: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL2: 1
<6>[10015.090215] [2: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL2: 0
<6>[10015.090239] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x3c (was 0x1ff, writing 0x101ed)
<6>[10015.090263] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co

nfig space at offset 0x38 (was 0x0, writing 0x0)


<6>[10015.090280] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x34 (was 0x40, writing 0x40)
<6>[10015.090297] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x30 (was 0x0, writing 0x0)
<6>[10015.090314] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x2c (was 0x0, writing 0x0)
<6>[10015.090330] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x28 (was 0x0, writing 0x0)
<6>[10015.090348] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x24 (was 0x0, writing 0x0)
<6>[10015.090364] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x20 (was 0x1ff01c00, writing 0x1ff01c00)
<6>[10015.090381] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x1c (was 0x0, writing 0x0)
<6>[10015.090398] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x18 (was 0x10100, writing 0x10100)
<6>[10015.090415] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x14 (was 0x0, writing 0x0)
<6>[10015.090561] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x10 (was 0x0, writing 0x0)
<6>[10015.090578] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0xc (was 0x10000, writing 0x10010)
<6>[10015.090600] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x8 (was 0x1, writing 0x6040001)
<6>[10015.090623] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x4 (was 0x100107, writing 0x100147)
<6>[10015.090646] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x0 (was 0xa575144d, writing 0xa575144d)
<6>[10015.090709] [2: system_server: 4318] exynos-pcie 15660000.pcie1: exynos_
pcie_poweron, end of poweron, pcie state: 3
<4>[10015.090727] [2: system_server: 4318] dhdpcie_resume_dev: Enter
<6>[10015.090861] [2: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_DEVCTL:
2c10
<6>[10015.090965] [2: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_LNKCTL:
142
<6>[10015.090974] [2: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_SLTCTL:
0
<6>[10015.090985] [2: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_RTCTL:
0
<6>[10015.091132] [2: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_DEVCTL2
: 400
<6>[10015.091236] [2: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_LNKCTL2
: 1
<6>[10015.091245] [2: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_SLTCTL2
: 0
<6>[10015.091624] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x3c (was 0x100, writing 0x1ed)
<6>[10015.091823] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x38 (was 0x0, writing 0x0)
<6>[10015.091928] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x34 (was 0x48, writing 0x48)
<6>[10015.092033] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x30 (was 0x0, writing 0x0)
<6>[10015.092452] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x2c (was 0x77414e4, writing 0x77414e4)
<6>[10015.092575] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x28 (was 0x0, writing 0x0)
<6>[10015.092680] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x24 (was 0x0, writing 0x0)

<6>[10015.092785] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi


g space at offset 0x20 (was 0x0, writing 0x0)
<6>[10015.092890] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x1c (was 0x0, writing 0x0)
<6>[10015.092995] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x18 (was 0x4, writing 0x1c400004)
<6>[10015.093469] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x18 (writing 0x1c400004)
<6>[10015.093574] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x14 (was 0x0, writing 0x0)
<6>[10015.093679] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x10 (was 0x4, writing 0x1c200004)
<6>[10015.093878] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x10 (writing 0x1c200004)
<6>[10015.093983] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0xc (was 0x0, writing 0x10)
<6>[10015.094182] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x8 (was 0x2800003, writing 0x2800003)
<6>[10015.094286] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x4 (was 0x100000, writing 0x100146)
<6>[10015.094767] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x0 (was 0x43e914e4, writing 0x43e914e4)
<6>[10015.095680] [1: kworker/u16:11:32455] usb 1-2: reset high-speed USB devic
e number 2 using s5p-ehci
<4>[10015.096276] [2: system_server: 4318] dhdpcie_send_mb_data: H2D_MB_DATA:
0x00000010
<4>[10015.096310] [2: system_server: 4318] dhdpcie_send_mb_data: send H2D_HOST
_D0_INFORM to dongle
<6>[10015.103696] [0:wl_event_handle: 5324] CFG80211-INFO2) wl_check_pmstatus :
PM status : STAY_AWAKE() 1 SCAN_IN_PROGRESS() 1 WLC_RM_IN_PROGRESS() 0 AS_IN_PR
OGRESS() 1 wlc->wake 0 wlc->PMpending 0 wlc->PSpoll 0 wlc->apsd_sta_usp 0
<6>[10015.103696] [0:wl_event_handle: 5324] wlc->PMawakebcn 0 wlc->txpend16165w
ar 0 wlc->check_for_unaligned_tbtt 0
<6>[10015.103696] [0:wl_event_handle: 5324] wlc->gptimer_stay_awake_req 0 wlc->
pm2_radio_shutoff_pending 0 wlc->user_wake_req 0 BTA_ACTIVE() 0
<6>[10015.103696] [0:wl_event_handle: 5324] wlc_rrm_inprog 0
<6>[10015.103696] [0:wl_event_handle: 5324] bsscfg 0 BSS 1 PS_ALLOWED() 0 WLC_P
ORTOPEN() 1 dtim_programmed 1 PMpending 0 priorPMstate 1 PMawakebcn 0 WME_PM_blo
cked 0 PM 2 PMenabled 0 PSpoll 0 apsd_sta_usp 0 check_for_unaligned_tbtt 0 PMblo
cked 0x0
<6>[10015.103696] [0:wl_event_handle: 5324]
<6>[10015.103762] [0:wl_event_handle: 5324] CFG80211-INFO2) wl_get_auth_assoc_s
tatus : event=3 status 5 reason 0
<6>[10015.103779] [0:wl_event_handle: 5324] CFG80211-INFO2) wl_get_auth_assoc_s
tatus : event=3 status 5 reason 0
<6>[10015.103794] [0:wl_event_handle: 5324] CFG80211-INFO2) wl_get_auth_assoc_s
tatus : event=3 status 5 reason 0
<7>[10015.113696] [0: kworker/u16:11:32455] usb 1-2: USB quirks for this device
: 100
<6>[10015.118046] [0: kworker/u16:11:32455] [CHKRA:5]>
<6>[10015.118283] I[0: kworker/u16:26:32550] [NACB:5]<
<6>[10015.118293] I[0: kworker/u16:26:32550] notification_available_cb: set lpa
handling to false
<6>[10015.118314] I[0: kworker/u16:26:32550] [CHKRA:5]>
<6>[10015.118591] [2: system_server: 4318] PM: resume of devices complete afte
r 157.805 msecs
<7>[10015.122687] [0:
kworker/0:0:13589] max77843_fg_write_temp: temperature
to (280, 0x1c00)
<6>[10015.123118] [0:
kworker/0:0:13589] max77843_fg_check_qrtable: QRTABLE2
0_REG(0x1603), QRTABLE30_REG(0x1005)

<7>[10015.124309]
<6>[10015.124596]
changed
<6>[10015.124622]
Tbat:280)
<6>[10015.124759]
sleep_mode = 0
<6>[10015.124795]

[2: system_server: 4318] PM: Finishing wakeup.


[0:
kworker/0:0:13589] power_supply battery: power_supply_
[0:

kworker/0:0:13589] Skip monitor work(37, Vnow:4063mV,

[0:

kworker/0:0:13589] sec_bat_get_property cable type = 1

[0:

kworker/0:0:13589] sec_bat_get_property cable type = 1

<7>[10015.125433] [3:
khubd: 742] hub 1-0:1.0: state 7 ports 2 chg 00
04 evt 0000
<6>[10015.125446] [0:
kworker/0:0:13589] exynos-dwc3 15400000.usb: dwc3_exyn
os_runtime_suspend
<6>[10015.125507] [3:
khubd: 742] hub 1-0:1.0: port 2, status 0503, c
hange 0000, 480 Mb/s
<6>[10015.127499] [1:
healthd: 3346] sec_bat_get_property cable type = 1
sleep_mode = 0
<4>[10015.124324] [3:onic.tuiservice: 659] Restarting tasks ...
t-base-tui module: ioctl 0x80047402 <6>[10015.127912] [3:onic.tuiservice: 659]
TUI_IO_WAITCMD
<3>[10015.128186] [0:
mdm_helper: 3355] esoc REQ enginer waiting on request
<4>[10015.128591] [2: system_server: 4318] done.
<12>[10015.129049] [1:
healthd: 3346] healthd: battery l=98 v=4063 t=28.
0 h=2 st=3 c=0 o=1 ca=-256 ct=0 ps=0 chg= 2016-11-17 16:20:58.680511019 UTC
<12>[10015.129100] [1:
healthd: 3346] healthd: battery l=98 v=4063 t=28.
0 h=2 st=3 c=0 o=1 ca=-256 ct=0 ps=0 chg= 2016-11-17 16:20:58.680511019 UTC hv=0
sec=0 chg=
<14>[10015.129194] [1:
healthd: 3346] healthd-android: healthd_mode_andr
oid_battery_update
<14>[10015.129221] [1:
healthd: 3346] BatteryPropertiesRegistrar: notify
Listeners : start
<14>[10015.129249] [1:
healthd: 3346] IBatteryPropertiesListener : batte
ryPropertiesChanged!
<14>[10015.129249] [1:
healthd: 3346] : BatteryPropertiesRegistrar: noti
fyListeners : done
<6>[10015.131796] [0: thread_hotplug:19229] frequency info : 1200000, prev_cmd
1, exe_cmd 4
<6>[10015.131820] [0: thread_hotplug:19229] lcd is on : 0, low power mode = 0,
dm_hotplug disable = 0
<6>[10015.131833] [0: thread_hotplug:19229] cluster1 cores hotplug out : 0
<6>[10015.135111] [2: system_server: 4318] mdm_hsic_pm_notify_event: unblock r
equest
<6>[10015.135144] [2: system_server: 4318] request_active_lock_set
<6>[10015.135320] [0: system_server: 4318] PM: suspend exit 2016-11-17 16:20:5
8.686971645 UTC
<6>[10015.137602] [1:
kworker/1:4:14113] MIF(418000): unset TMU_COLD: 612500
=> (set_volt: 575000, get_volt: 575000)
<6>[10015.138315] [1:
kworker/1:4:14113] DISP(100000): unset TMU_COLD: (set_
volt: 650000, get_volt: 650000)
<6>[10015.139162] [1:
kworker/1:4:14113] INT(100000): unset TMU_COLD: 687500
=> 650000
<6>[10015.139189] [1:
kworker/1:4:14113] tmu temperature state 1 to 0, cur_t
emp : 35
<6>[10015.139204] [1:
kworker/1:4:14113] gpu temperature state 1 to 0
<6>[10015.152275] [3: kworker/u16:33:32557] mdm_hsic_rpm_check
<6>[10015.152304] [3: kworker/u16:33:32557] mdm_hsic_rpm_restart
<6>[10015.244265] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10015.244408] [3:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3

<6>[10015.244433] [3:MHI_STATE_THREA: 4605]


M1 state transition from state 3
<6>[10015.244461] [3:MHI_STATE_THREA: 4605]
ansition to M2
<6>[10015.244663] [3:MHI_STATE_THREA: 4605]
deferred work
<4>[10015.316062] I[0:
dhcpcd:18795]
<7>[10015.631126] [0:
kworker/0:0:13589]
<7>[10015.642359] [0:
kworker/0:0:13589]
<7>[10015.642434] [0:
kworker/0:0:13589]
1
<7>[10015.642487] [0:
kworker/0:0:13589]
hub
<3>[10015.643664] [0:
kworker/0:0:13589]
time_suspend
<7>[10015.655746] [0:
kworker/0:0:13589]
amsung_usb2phy_runtime_suspend
<6>[10015.655816] [0:
kworker/0:0:13589]
<6>[10015.655886] [0:
kworker/0:0:13589]
child=0
<6>[10015.656273] [1: system_server: 4318]
59.207916449 UTC
<6>[10015.656316] [3: system_server: 4318]
<7>[10015.669451] [3: system_server: 4318]
<6>[10015.669761] [0: system_server: 4318]
ynamic_hotplug CMD_SLEEP_PREPARE
<6>[10015.669813] [0: system_server: 4318]
leep_prepare_cpus : 5
<6>[10015.669887] [0: thread_hotplug:19229]
<6>[10015.681363] [1: system_server: 4318]
> (set_volt: 612500, get_volt: 612500)
<6>[10015.682781] [1: system_server: 4318]
=> (set_volt: 687500, get_volt: 687500)
<6>[10015.684295] [1: system_server: 4318]
> 687500
<6>[10015.684344] [1: system_server: 4318]
<6>[10015.684384] [1: system_server: 4318]
<6>[10015.684452] [1: system_server: 4318]
uest
<3>[10015.686515] [0:
mdm_helper: 3355]
<4>[10015.685906] [1: system_server: 4318]
elapsed 0.008 seconds) done.
<4>[10015.694695] [1: system_server: 4318]
... (elapsed 0.008 seconds) done.
<7>[10015.703710] [1: system_server: 4318]
<4>[10015.703750] [1: system_server: 4318]
le_suspend to debug)
<6>[10015.705989] [1: system_server: 4318]
os_runtime_resume
<6>[10015.708617] [0: kworker/u16:7:32450]
<6>[10015.708666] [0: kworker/u16:7:32450]
MHI state 4
<4>[10015.708693] [1: system_server: 4318]
0x00000001
<6>[10015.708722] [0: kworker/u16:7:32450]
4, Pending M0 0 Pending M3 0
<6>[10015.708752] [0: kworker/u16:7:32450]
ut of M2
<4>[10015.709183] [1: system_server: 4318]
_D3_INFORM to dongle

[process_M1_transition] Processing
[process_M1_transition] Allowing tr
[process_M1_transition] Starting M3
DHCP - DISCOVER [TX]
usb 1-2: usb auto-suspend, wakeup 1
hub 1-0:1.0: hub_suspend
usb usb1: bus auto-suspend, wakeup
s5p-ehci 15510000.usb: suspend root
s5p-ehci 15510000.usb: s5p_ehci_run
samsung-usb2phy 15530000.usb2phy: s
request_active_lock_release
s5p_ehci_runtime_suspend: usage=0,
PM: suspend entry 2016-11-17 16:20:
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
exynos_dm_hotplug_notifier, 958 : d
nr_sleep_prepare_cpus : 4, tmp_nr_s
stopped thread_hotplug
MIF(418000): set TMU_COLD: 575000 =
DISP(100000): set TMU_COLD: 650000
INT(100000): set TMU_COLD: 650000 =
tmu temperature state 0 to 1
gpu temperature state 0 to 1
mdm_hsic_pm_notify_event: block req
esoc REQ engine released from wait
Freezing user space processes ... (
Freezing remaining freezable tasks
PM: Entering mem sleep
Suspending console(s) (use no_conso
exynos-dwc3 15400000.usb: dwc3_exyn
[mhi_suspend] [mhi_suspend]
[mhi_suspend] Entered, sys state 2,
dhdpcie_send_mb_data: H2D_MB_DATA:
[mhi_initiate_m3] Entered MHI state
[mhi_initiate_m3] Triggering wake o
dhdpcie_send_mb_data: send H2D_HOST

<4>[10015.710364]
<4>[10015.710401]
Received D3 ACK
<4>[10015.710812]
0x00000008
<4>[10015.711177]
_D0_INFORM_IN_USE
<4>[10015.711391]
<6>[10015.711819]
43e914e4
<6>[10015.712013]
100146
<6>[10015.712277]
2800003
<6>[10015.712424]
10
<6>[10015.712633]
1c200004
<6>[10015.712844]
0
<6>[10015.713052]
1c400004
<6>[10015.713262]
0
<6>[10015.713472]
0
<6>[10015.713678]
0
<6>[10015.713886]
0
<6>[10015.714093]
77414e4
<6>[10015.714298]
0
<6>[10015.714506]
48
<6>[10015.714713]
0
<6>[10015.714919]
1ed
<6>[10015.715129]
2c10
<6>[10015.715337]
142
<6>[10015.715365]
0
<6>[10015.715392]
0
<6>[10015.715597]
: 400
<6>[10015.715752]
: 1
<6>[10015.715780]
: 0
<6>[10015.718456]
device_vendor_id
<6>[10015.718662]
PMCSR reg value:
<6>[10015.718912]
PMCSR reg value:

I[0:
I[0:

swapper/0:
swapper/0:

0] D2H_MB_DATA: 0x00000001
0] dhdpcie_handle_mb_data D2H_MB_DATA:

[0: system_server: 4318] dhdpcie_send_mb_data: H2D_MB_DATA:


[0: system_server: 4318] dhdpcie_send_mb_data: send H2D_HOST
to dongle
[0: system_server: 4318] dhdpcie_suspend_dev: Enter
[0: system_server: 4318] pcieh 0001:01:00.0: reg offset: 0:
[0: system_server: 4318] pcieh 0001:01:00.0: reg offset: 4:
[0: system_server: 4318] pcieh 0001:01:00.0: reg offset: 8:
[0: system_server: 4318] pcieh 0001:01:00.0: reg offset: 12:
[0: system_server: 4318] pcieh 0001:01:00.0: reg offset: 16:
[0: system_server: 4318] pcieh 0001:01:00.0: reg offset: 20:
[0: system_server: 4318] pcieh 0001:01:00.0: reg offset: 24:
[0: system_server: 4318] pcieh 0001:01:00.0: reg offset: 28:
[0: system_server: 4318] pcieh 0001:01:00.0: reg offset: 32:
[0: system_server: 4318] pcieh 0001:01:00.0: reg offset: 36:
[0: system_server: 4318] pcieh 0001:01:00.0: reg offset: 40:
[0: system_server: 4318] pcieh 0001:01:00.0: reg offset: 44:
[0: system_server: 4318] pcieh 0001:01:00.0: reg offset: 48:
[0: system_server: 4318] pcieh 0001:01:00.0: reg offset: 52:
[0: system_server: 4318] pcieh 0001:01:00.0: reg offset: 56:
[0: system_server: 4318] pcieh 0001:01:00.0: reg offset: 60:
[0: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_DEVCTL:
[0: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_LNKCTL:
[0: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_SLTCTL:
[0: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_RTCTL:
[0: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_DEVCTL2
[0: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_LNKCTL2
[0: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_SLTCTL2
[0:
reg :
[0:
4108
[0:
410b

system_server: 4318] pcieh 0001:01:00.0: [debug] step 1,


43e914e4
system_server: 4318] pcieh 0001:01:00.0: [debug] step 2,
system_server: 4318] pcieh 0001:01:00.0: [debug] step 3,

<6>[10015.719049] [0: system_server: 4318] pcieh 0001:01:00.0: [debug] step 4,


device_vendor_id reg : 43e914e4
<6>[10015.719479] [0: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa264c0
<6>[10015.719521] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10015.719605] [3:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[10015.719641] [3:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[10015.719672] [3:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work was
cancelled
<6>[10015.724046] [3:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[10015.724072] [0: kworker/u16:7:32450] [mhi_initiate_m3] Cancelled M1 time
r, timer was active
<6>[10015.724297] [0: kworker/u16:7:32450] [mhi_initiate_m3] Waiting for M3 co
mpletion.
<6>[10015.732020] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10015.732094] [3:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 5
<6>[10015.732128] [3:MHI_STATE_THREA: 4605] [process_M3_transition] Processing
M3 state transition
<6>[10015.732181] [0: kworker/u16:7:32450] [mhi_initiate_m3] M3 completion rec
eived
<6>[10015.732277] [0: kworker/u16:7:32450] [mhi_turn_off_pcie_link] Entered...
<6>[10015.732693] [1: system_server: 4318] pcieh 0001:01:00.0: [debug] pmcsr r
eg : 410b dev->current_state : 0
<6>[10015.733040] [1: system_server: 4318] pcieh 0001:01:00.0: [debug] device_
vendor_id reg : 43e914e4
<6>[10015.733161] [1: system_server: 4318] pcieport 0001:00:00.0: reg offset:
0: a575144d
<6>[10015.733326] [1: system_server: 4318] pcieport 0001:00:00.0: reg offset:
4: 100147
<6>[10015.733361] [1: system_server: 4318] pcieport 0001:00:00.0: reg offset:
8: 6040001
<6>[10015.733397] [1: system_server: 4318] pcieport 0001:00:00.0: reg offset:
12: 10010
<6>[10015.733432] [1: system_server: 4318] pcieport 0001:00:00.0: reg offset:
16: 0
<6>[10015.733465] [1: system_server: 4318] pcieport 0001:00:00.0: reg offset:
20: 0
<6>[10015.733501] [1: system_server: 4318] pcieport 0001:00:00.0: reg offset:
24: 10100
<6>[10015.733666] [1: system_server: 4318] pcieport 0001:00:00.0: reg offset:
28: 0
<6>[10015.733701] [1: system_server: 4318] pcieport 0001:00:00.0: reg offset:
32: 1ff01c00
<6>[10015.733736] [1: system_server: 4318] pcieport 0001:00:00.0: reg offset:
36: 0
<6>[10015.733772] [1: system_server: 4318] pcieport 0001:00:00.0: reg offset:
40: 0
<6>[10015.733806] [1: system_server: 4318] pcieport 0001:00:00.0: reg offset:
44: 0
<6>[10015.733841] [1: system_server: 4318] pcieport 0001:00:00.0: reg offset:
48: 0
<6>[10015.734005] [1: system_server: 4318] pcieport 0001:00:00.0: reg offset:
52: 40
<6>[10015.734041] [1: system_server: 4318] pcieport 0001:00:00.0: reg offset:
56: 0
<6>[10015.734076] [1: system_server: 4318] pcieport 0001:00:00.0: reg offset:

60: 101ed
<6>[10015.734113] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL: 2010
<6>[10015.734147] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL: 42
<6>[10015.734175] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL: 0
<6>[10015.734346] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_RTCT
L: 0
<6>[10015.734380] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL2: 400
<6>[10015.734414] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL2: 1
<6>[10015.734442] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL2: 0
<6>[10015.734739] [1: system_server: 4318] exynos-pcie 15660000.pcie1: ack mes
sage is ok
<6>[10015.734770] [1: system_server: 4318] exynos-pcie 15660000.pcie1: receive
d Enter_L23_READY DLLP packet
<6>[10015.734809] [1: system_server: 4318] exynos-pcie 15660000.pcie1: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[10015.734961] [1: system_server: 4318] exynos-pcie 15660000.pcie1: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[10015.740074] [0: system_server: 4318] voltage(793750) + volt_offset(37500
) is bigger than max_volt(793750)
<6>[10015.740124] [0: system_server: 4318] voltage(793750) + volt_offset(37500
) is bigger than max_volt(793750)
<6>[10015.741364] [0: system_server: 4318] DEVFREQ(MIF): suspend voltage(79375
0 793750)
<6>[10015.744126] [0: system_server: 4318] s2m_rtc_update: RTC_UPDATE_REGISTER
check : 0x00
<6>[10015.744327] [0: system_server: 4318] s2m-rtc s2m-rtc: s2m_rtc_read_time:
2016-11-17 16:20:59(0x10)PM
<5>[10015.744733] [0: system_server: 4318] sd 0:0:0:0: [sda] Synchronizing SCS
I cache
<6>[10015.745717] [0: kworker/u16:7:32450] mhi 0000:01:00.0: [debug] pmcsr reg
: b dev->current_state : 0
<6>[10015.745847] [0: kworker/u16:7:32450] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[10015.745930] [0: kworker/u16:7:32450] exynos-pcie 10ee0000.pcie0: ack mes
sage is ok
<6>[10015.745959] [0: kworker/u16:7:32450] exynos-pcie 10ee0000.pcie0: receive
d Enter_L23_READY DLLP packet
<6>[10015.745995] [0: kworker/u16:7:32450] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[10015.746103] [0: kworker/u16:7:32450] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[10015.750356] [1: system_server: 4318] s2m_rtc_update: RTC_UPDATE_REGISTER
check : 0x00
<6>[10015.750564] [1: system_server: 4318] s2m-rtc s2m-rtc: s2m_rtc_read_time:
2016-11-17 16:20:59(0x10)PM
<6>[10015.751870] [1: system_server: 4318] s2m_rtc_update: RTC_UPDATE_REGISTER
check : 0x00
<6>[10015.752065] [1: system_server: 4318] s2m-rtc s2m-rtc: s2m_rtc_read_time:
2016-11-17 16:20:59(0x10)PM
<6>[10015.752105] [1: system_server: 4318] s2m-rtc s2m-rtc: s2m_rtc_set_alarm:
2016-11-17 16:25:29(0x10)PM
<6>[10015.753532] [1: system_server: 4318] s2m_rtc_update: RTC_UPDATE_REGISTER
check : 0x00
<6>[10015.754941] [1: system_server: 4318] s2m_rtc_update: RTC_UPDATE_REGISTER

check : 0x00
<6>[10015.755583] [1: system_server: 4318] max86900_pm_suspend
<6>[10015.755956] [1: system_server: 4318] wake enabled for irq 7
<2>[10015.756117] [1: system_server: 4318] --------Si47xx i2c driver Si47xx_su
spend called
<2>[10015.756139] [1: system_server: 4318] Si47xx_suspend: device not supporte
d
<6>[10015.756191] [1: system_server: 4318] [VIB] max77843_haptic_suspend
<6>[10015.756218] [1: system_server: 4318] [VIB] max77843_haptic_i2c 0
<6>[10015.757229] [1: system_server: 4318] wake enabled for irq 4
<6>[10015.757403] [1: system_server: 4318] vfsspi_regulator_onoff: ocp off, sm
c ret = 0
<6>[10015.757425] [1: system_server: 4318] vfsspi_regulator_onoff: off
<6>[10015.757460] [1: system_server: 4318] vfsspi_pm_suspend
<6>[10015.757531] [1: system_server: 4318] [SSP] ssp_suspend:
<6>[10015.764200] [1: system_server: 4318] [SSP] ssp_send_cmd: command 0xd4 0
<6>[10015.764494] [1: system_server: 4318] mst_ldo_device_suspend
<6>[10015.764568] [1: system_server: 4318] MST_LDO_DRV]]] suspend
<6>[10015.764585] [1: system_server: 4318] MST_LDO_DRV]]] suspend success afte
r smc : 122f122
<6>[10015.776101] [0: kworker/u16:7:32450] [mhi_turn_off_pcie_link] Exited...
<6>[10015.803030] [1: system_server: 4318] [MAX98505_DEBUG] max98505_suspend:
enter
<6>[10015.803165] [1: system_server: 4318] pacific-audio sound.34: pacific_sus
pend_post : set AIF1 port slave
<6>[10015.803255] [1: system_server: 4318] wake enabled for irq 577
<6>[10015.803283] [1: system_server: 4318] wake enabled for irq 580
<4>[10015.803324] [1: system_server: 4318] certify_hall_suspend start
<4>[10015.803352] [1: system_server: 4318] [keys] certify_hall_suspend certify
_status : 0 (detach)
<4>[10015.803387] [1: system_server: 4318] hall_suspend start
<4>[10015.803412] [1: system_server: 4318] [keys] hall_suspend flip_status : 1
(open)
<6>[10015.816331] [0: system_server: 4318] [MIF] usb_phy_prepare_shutdown
<6>[10015.816364] [0: system_server: 4318] dev rdy val = 1
<6>[10015.816387] [0: system_server: 4318] set_host_stat:set host port power s
tatus to [0]
<6>[10015.846372] [0: system_server: 4318] wait_dev_pwr_stat:[PWR OFF]...
<6>[10015.855298] I[0: system_server: 4318] mdm_device_ready_irq_handler, irq:
host ready val : 00000000
<6>[10015.855324] I[0: system_server: 4318] mdm_device_ready_irq_handler, irq:
dev ready val : 00000000
<6>[10015.876355] [0: system_server: 4318] done
<7>[10015.876419] [0: system_server: 4318] samsung-usb2phy 15530000.usb2phy: s
amsung_usb2phy_shutdown: End of setting for shutdown
<6>[10015.876740] [0: system_server: 4318] spi suspend is handled in device su
spend, dma mode = 0, bus_num = 3
<6>[10015.876776] [0: system_server: 4318] spi suspend is handled in device su
spend, dma mode = 0, bus_num = 1
<6>[10015.876935] [0: system_server: 4318] 3s3c24xx_serial_shutdown: port=4 res
et
<6>[10015.878268] [0: system_server: 4318] PM: suspend of devices complete aft
er 170.577 msecs
<6>[10015.878293] [0: system_server: 4318] ---Enabled regulators--<6>[10015.878337] [0: system_server: 4318] LDO1: 1200000uV, 0xffffffea mode, n
ull
<6>[10015.880602] [0: system_server: 4318] VDDIO_1.8V_COMP: 1800000uV, 0xfffff
fea mode, null
<6>[10015.881622] [0: system_server: 4318] VDDD_RET_1.0V_COMP: 700000uV, 0xfff
fffea mode, null

<6>[10015.883747] [0: system_server: 4318] VDD20_1P8_AP: 1800000uV, 0xffffffea


mode, null
<6>[10015.884467] [0: system_server: 4318] VCC_1.8V_CODEC_PMIC: 1800000uV, 0xf
fffffea mode, spi0.0-DBVDD1, spi0.0-AVDD, regulator.47-SUPPLY
<6>[10015.886320] [0: system_server: 4318] regulator-dummy: -22uV, 0xffffffea
mode, null
<6>[10015.886347] [0: system_server: 4318] Always On regulator count :10 [VDD2
2_1P1_2MIC][vdd_ldo8][vdd_mldo][vdd_lldo][vdd_disp_cam0][vdd_int][vdd_apollo][vd
d_atlas][vdd_mif][safeout1_range]
<6>[10015.886370] [0: system_server: 4318] ---Enabled regulator count: 16--<6>[10015.888608] [0: system_server: 4318] PM: late suspend of devices complet
e after 2.208 msecs
<6>[10015.889889] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
0: ffffffff
<6>[10015.889923] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
4: ffffffff
<6>[10015.889952] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
8: ffffffff
<6>[10015.889981] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
12: ffffffff
<6>[10015.890010] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
16: ffffffff
<6>[10015.890038] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
20: ffffffff
<6>[10015.890067] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
24: ffffffff
<6>[10015.890096] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
28: ffffffff
<6>[10015.890124] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
32: ffffffff
<6>[10015.890153] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
36: ffffffff
<6>[10015.890181] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
40: ffffffff
<6>[10015.890209] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
44: ffffffff
<6>[10015.890238] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
48: ffffffff
<6>[10015.890266] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
52: ffffffff
<6>[10015.890294] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
56: ffffffff
<6>[10015.890323] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
60: ffffffff
<6>[10015.890352] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL: 0
<6>[10015.890380] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL: 0
<6>[10015.890407] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL: 0
<6>[10015.890435] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_RTCT
L: 0
<6>[10015.890462] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL2: 0
<6>[10015.890489] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL2: 0
<6>[10015.890517] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL2: 0
<6>[10015.891753] [0: system_server: 4318] exynos-pcie 15660000.pcie1: RC1 alr
eady off

<6>[10015.891787] [0: system_server: 4318] exynos-pcie 10ee0000.pcie0: RC0 alr


eady off
<6>[10015.891977] [0: system_server: 4318] spi suspend is handled in suspend_n
oirq, dma mode = 1, bus_num = 4
<6>[10015.892016] [0: system_server: 4318] spi suspend is handled in suspend_n
oirq, dma mode = 1, bus_num = 0
<6>[10015.892364] [0: system_server: 4318] PM: noirq suspend of devices comple
te after 3.720 msecs
<4>[10015.892390] [0: system_server: 4318] Disabling non-boot CPUs ...
<6>[10015.892821] [0: system_server: 4318] MobiCore mcd: <- core_num=0x0000000
0, active_cpu=0x00000001
<6>[10015.892928] [1:
mc_fastcall: 1747] MobiCore mcd: CoreSwap ok 1 -> 0
<4>[10015.894275] [1:
migration/1: 13] IRQ149 no longer affine to CPU1
<5>[10015.895884] [3: system_server: 4318] CPU1: shutdown
<4>[10015.898190] [2:
migration/2: 18] IRQ150 no longer affine to CPU2
<5>[10015.899802] [0: system_server: 4318] CPU2: shutdown
<4>[10015.902174] [3:
migration/3: 23] IRQ151 no longer affine to CPU3
<5>[10015.903718] [0: system_server: 4318] CPU3: shutdown
<4>[10015.905934] [4:
migration/4: 28] IRQ152 no longer affine to CPU4
<5>[10015.906743] [0: system_server: 4318] CPU4: shutdown
<6>[10015.907857] [0: system_server: 4318] [MIF] 1552000Khz
<6>[10015.907857] [0: system_server: 4318] WAKEUP_STAT: 0x80000001
<6>[10015.907857] [0: system_server: 4318] EINT_PEND: 0x00, 0x40 0x08, 0x00
<6>[10015.907857] [0: system_server: 4318] Resume caused by IRQ 586, dhdpcie_h
ost_wake
<6>[10015.907857] [0: system_server: 4318] Suspended for 0.000 seconds
<6>[10015.908005] [0: system_server: 4318] Enabling non-boot CPUs ...
<4>[10015.908173] [1:
swapper/1:
0] CPU1: Booted secondary processor
<6>[10015.908822] [0: system_server: 4318] MobiCore mcd: <- core_num=0x0000000
1, active_cpu=0x00000000
<6>[10015.908934] [0:
mc_fastcall: 1747] MobiCore mcd: CoreSwap ok 0 -> 1
<6>[10015.908972] [0: system_server: 4318] CPU1 is up
<4>[10015.909115] [2:
swapper/2:
0] CPU2: Booted secondary processor
<6>[10015.909714] [0: system_server: 4318] CPU2 is up
<4>[10015.909865] [3:
swapper/3:
0] CPU3: Booted secondary processor
<6>[10015.910424] [0: system_server: 4318] CPU3 is up
<4>[10015.910652] [4:
swapper/4:
0] CPU4: Booted secondary processor
<6>[10015.911354] [0: system_server: 4318] CPU4 is up
<6>[10015.911550] [0: system_server: 4318] spi resume is handled in resume_noi
rq, dma mode = 1, bus_num = 0
<6>[10015.911607] [0: system_server: 4318] spi resume is handled in resume_noi
rq, dma mode = 1, bus_num = 4
<6>[10015.925557] [1: system_server: 4318] pcieport 0001:00:00.0: [debug] pmcs
r reg : ffff dev->current_state : 3
<6>[10015.925570] [1: system_server: 4318] pcieport 0001:00:00.0: [debug] devi
ce_vendor_id reg : ffffffff
<6>[10015.925582] [1: system_server: 4318] pcieport 0001:00:00.0: Refused to c
hange power state, currently in D3, PCI_PM_CTRL=ffff
<6>[10015.925595] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL: 0
<6>[10015.925605] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL: 0
<6>[10015.925614] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL: 0
<6>[10015.925623] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_RTCT
L: 0
<6>[10015.925634] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL2: 0
<6>[10015.925644] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL2: 0

<6>[10015.925652] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC


TL2: 0
<6>[10015.925664] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x3c (was 0xffffffff, writing 0xffffffff)
<6>[10015.925676] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x38 (was 0xffffffff, writing 0xffffffff)
<6>[10015.925687] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x34 (was 0xffffffff, writing 0xffffffff)
<6>[10015.925698] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x30 (was 0xffffffff, writing 0xffffffff)
<6>[10015.925709] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x2c (was 0xffffffff, writing 0xffffffff)
<6>[10015.925720] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x28 (was 0xffffffff, writing 0xffffffff)
<6>[10015.925731] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x24 (was 0xffffffff, writing 0xffffffff)
<6>[10015.925742] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x20 (was 0xffffffff, writing 0xffffffff)
<6>[10015.925753] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x1c (was 0xffffffff, writing 0xffffffff)
<6>[10015.925763] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x18 (was 0xffffffff, writing 0xffffffff)
<6>[10015.925774] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x14 (was 0xffffffff, writing 0xffffffff)
<6>[10015.925785] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x10 (was 0xffffffff, writing 0xffffffff)
<6>[10015.925796] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0xc (was 0xffffffff, writing 0xffffffff)
<6>[10015.925807] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x8 (was 0xffffffff, writing 0xffffffff)
<6>[10015.925818] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x4 (was 0xffffffff, writing 0xffffffff)
<6>[10015.925829] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x0 (was 0xffffffff, writing 0xffffffff)
<6>[10015.925852] [1: system_server: 4318] pcieh 0001:01:00.0: [debug] step 1,
device_vendor_id reg : ffffffff
<6>[10015.925862] [1: system_server: 4318] pcieh 0001:01:00.0: [debug] step 2,
PMCSR reg value: ffff
<6>[10015.925872] [1: system_server: 4318] pcieh 0001:01:00.0: [debug] step 3,
PMCSR reg value: 0
<6>[10015.925882] [1: system_server: 4318] pcieh 0001:01:00.0: [debug] step 4,
device_vendor_id reg : ffffffff
<6>[10015.938864] [1: system_server: 4318] pcieh 0001:01:00.0: [debug] pmcsr r
eg : ffff dev->current_state : 3
<6>[10015.938875] [1: system_server: 4318] pcieh 0001:01:00.0: [debug] device_
vendor_id reg : ffffffff
<6>[10015.938887] [1: system_server: 4318] pcieh 0001:01:00.0: Refused to chan
ge power state, currently in D3, PCI_PM_CTRL=ffff
<6>[10015.938899] [1: system_server: 4318] exynos-pcie 15660000.pcie1: PCIE li
nk state is 0
<6>[10015.938909] [1: system_server: 4318] pcieh 0001:01:00.0: [debug] setp 5,
PMCSR reg value: ffff
<6>[10015.938920] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_DEVCTL:
2c10
<6>[10015.938929] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_LNKCTL:
142
<6>[10015.938938] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_SLTCTL:
0
<6>[10015.938947] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_RTCTL:
0

<6>[10015.938957] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_DEVCTL2


: 400
<6>[10015.938966] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_LNKCTL2
: 1
<6>[10015.938975] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_SLTCTL2
: 0
<6>[10015.938986] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x3c (was 0xffffffff, writing 0x1ed)
<6>[10015.938998] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x38 (was 0xffffffff, writing 0x0)
<6>[10015.939009] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x34 (was 0xffffffff, writing 0x48)
<6>[10015.939020] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x30 (was 0xffffffff, writing 0x0)
<6>[10015.939030] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x2c (was 0xffffffff, writing 0x77414e4)
<6>[10015.939041] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x28 (was 0xffffffff, writing 0x0)
<6>[10015.939052] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x24 (was 0xffffffff, writing 0x0)
<6>[10015.969021] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x20 (was 0xffffffff, writing 0x0)
<6>[10015.998990] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x1c (was 0xffffffff, writing 0x0)
<6>[10016.028960] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x18 (was 0xffffffff, writing 0x1c400004)
<6>[10016.058929] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x14 (was 0xffffffff, writing 0x0)
<6>[10016.088898] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x10 (was 0xffffffff, writing 0x1c200004)
<6>[10016.105511] I[0:
swapper/0:
0] CFG80211-INFO2) wl_roam_timeout : r
oam timer expired
<6>[10016.118867] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0xc (was 0xffffffff, writing 0x10)
<6>[10016.118878] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x8 (was 0xffffffff, writing 0x2800003)
<6>[10016.118890] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x4 (was 0xffffffff, writing 0x100146)
<6>[10016.118901] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x0 (was 0xffffffff, writing 0x43e914e4)
<6>[10016.132202] [1: system_server: 4318] pcieport 0000:00:00.0: [debug] pmcs
r reg : ffff dev->current_state : 3
<6>[10016.132212] [1: system_server: 4318] pcieport 0000:00:00.0: [debug] devi
ce_vendor_id reg : ffffffff
<6>[10016.132223] [1: system_server: 4318] pcieport 0000:00:00.0: Refused to c
hange power state, currently in D3, PCI_PM_CTRL=ffff
<6>[10016.145523] [1: system_server: 4318] mhi 0000:01:00.0: [debug] pmcsr reg
: ffff dev->current_state : 3
<6>[10016.145534] [1: system_server: 4318] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : ffffffff
<6>[10016.145544] [1: system_server: 4318] mhi 0000:01:00.0: Refused to change
power state, currently in D3, PCI_PM_CTRL=ffff
<6>[10016.145666] [1: system_server: 4318] PM: noirq resume of devices complet
e after 234.296 msecs
<6>[10016.146134] [1: system_server: 4318] exynos-mailbox 11240000.mailbox: Lo
ading APM firmware ...
<6>[10016.146302] [1: system_server: 4318] OK
<6>[10016.147403] [1: system_server: 4318] PM: early resume of devices complet
e after 1.373 msecs
<6>[10016.147650] [2: kworker/u16:8:32451] [mhi_resume] [mhi_resume]

<6>[10016.147668] [2: kworker/u16:8:32451] [mhi_initiate_m0] Entered MHI state


5, Pending M0 0 Pending M3 0
<6>[10016.147679] [2: kworker/u16:8:32451] [mhi_initiate_m0] Waiting for M0 M1
or M3. Currently 5...
<6>[10016.147689] [2: kworker/u16:8:32451] [mhi_initiate_m0] Wait complete sta
te: 5
<6>[10016.147699] [2: kworker/u16:8:32451] [mhi_turn_on_pcie_link] Entered...
<6>[10016.147714] [2: kworker/u16:8:32451] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, start of poweron, pcie state: 0
<6>[10016.147895] [1: system_server: 4318] s3c2410_wdt: watchdog enabled
<6>[10016.151332] [1: system_server: 4318] spi resume is handled in device res
ume, dma mode = 0, bus_num = 1
<6>[10016.151367] [1: system_server: 4318] spi resume is handled in device res
ume, dma mode = 0, bus_num = 3
<7>[10016.151605] [1: system_server: 4318] samsung-usb2phy 15530000.usb2phy: C
an't configure specified phy mode
<7>[10016.151623] [1: system_server: 4318] samsung-usb2phy 15530000.usb2phy: e
nd of samsung_usb2phy_init
<7>[10016.151637] [1: system_server: 4318] samsung-usb2phy 15530000.usb2phy: s
amsung_usb2phy_runtime_resume
<4>[10016.151659] [1: system_server: 4318] usb usb1: root hub lost power or wa
s reset
<7>[10016.151681] [1: system_server: 4318] s5p-ehci 15510000.usb: reset comman
d 0080b02 park=3 ithresh=8 period=1024 Reset HALT
<6>[10016.151698] [1: system_server: 4318] dev rdy val = 0
<6>[10016.151706] [1: system_server: 4318] set_host_stat:set host port power s
tatus to [1]
<6>[10016.151718] [1: system_server: 4318] wait_dev_pwr_stat:[PWR ON]...
<6>[10016.173122] I[0:
swapper/0:
0] mdm_device_ready_irq_handler, irq:
host ready val : 00000001
<6>[10016.173132] I[0:
swapper/0:
0] mdm_device_ready_irq_handler, irq:
dev ready val : 00000001
<6>[10016.181680] [1: system_server: 4318] done
<7>[10016.181716] [0: kworker/u16:21:32544] usb usb1: usb resume
<7>[10016.181730] [0: kworker/u16:21:32544] s5p-ehci 15510000.usb: resume root
hub after power loss
<7>[10016.181742] [0: kworker/u16:21:32544] s5p-ehci 15510000.usb: LRESET 0
<7>[10016.181765] [0: kworker/u16:21:32544] hub 1-0:1.0: hub_reset_resume
<7>[10016.181775] [0: kworker/u16:21:32544] hub 1-0:1.0: enabling power on all
ports
<6>[10016.185874] [2: kworker/u16:8:32451] exynos-pcie 10ee0000.pcie0: D state
: 0, 3c4c00
<6>[10016.198138] [2: kworker/u16:8:32451] exynos-pcie 10ee0000.pcie0: exynos_
pcie_reset: Link up : 0x03e35e11
<6>[10016.198369] [2: kworker/u16:8:32451] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, end of poweron, pcie state: 3
<6>[10016.209065] [2: kworker/u16:8:32451] mhi 0000:01:00.0: [debug] pmcsr reg
: 8 dev->current_state : 3
<6>[10016.209241] [2: kworker/u16:8:32451] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[10016.209253] [2: kworker/u16:8:32451] exynos-pcie 10ee0000.pcie0: Recover
y for the link of RC0
<6>[10016.209263] [2: kworker/u16:8:32451] exynos-pcie 10ee0000.pcie0: Recover
config space of RC0 and its EP
<6>[10016.209273] [2: kworker/u16:8:32451] exynos-pcie 10ee0000.pcie0: Recover
RC0
<6>[10016.209302] [2: kworker/u16:8:32451] exynos-pcie 10ee0000.pcie0: Recover
EP of RC0
<6>[10016.209686] [2: kworker/u16:8:32451] exynos-pcie 10ee0000.pcie0: Refresh
ing the saved config space in PCI framework for RC0 and its EP

<6>[10016.214830] [2: kworker/u16:8:32451] [mhi_turn_on_pcie_link] Exited...


<6>[10016.214844] [2: kworker/u16:8:32451] [mhi_initiate_m0] Setting M0 ...
<6>[10016.214991] [2: kworker/u16:8:32451] [mhi_initiate_m0] Exited...
<7>[10016.215539] [0: kworker/u16:21:32544] s5p-ehci 15510000.usb: GetStatus po
rt:2 status 001803 0 ACK POWER sig=j CSC CONNECT
<7>[10016.215553] [0: kworker/u16:21:32544] hub 1-0:1.0: port 2: status 0501 ch
ange 0001
<7>[10016.215621] [3: kworker/u16:3: 8924] usb 1-2: finish reset-resume
<6>[10016.219618] [0: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 5 link 1, ring type 2, index 0 db 0x5fa264e0
<6>[10016.219633] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10016.219664] [3:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[10016.219676] [3:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[10016.219687] [3:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[10016.220165] [3:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[10016.220174] [2: kworker/u16:8:32451] [mhi_resume] Wait complete state: 2
<4>[10016.230482] [0: system_server: 4318] ufs_get_device_info: UNIQUE NUMBER
= 02157df271b5cb31 , LT: 0x22
<6>[10016.234187] [0: system_server: 4318] exynos-ufs 15570000.ufs: Power mode
change(0): M(1)G(2)L(2)HS-series(2)
<4>[10016.234535] [0: system_server: 4318] hall_resume start
<4>[10016.234547] [0: system_server: 4318] [keys] hall_resume flip_status : 1
(open)
<4>[10016.234561] [0: system_server: 4318] certify_hall_resume start
<4>[10016.234571] [0: system_server: 4318] [keys] certify_hall_resume certify_
status : 0 (detach)
<6>[10016.234588] [0: system_server: 4318] wake disabled for irq 577
<6>[10016.234598] [0: system_server: 4318] wake disabled for irq 580
<6>[10016.234727] [0:
kworker/0:0:13589] [MAX98505_DEBUG] max98505_resume: e
nter
<6>[10016.235611] [1: system_server: 4318] mst_ldo_device_resume
<6>[10016.235647] [1: system_server: 4318] MST_LDO_DRV]]] resume
<6>[10016.235653] [1: system_server: 4318] MST_LDO_DRV]]] resume success after
smc : 122f122
<6>[10016.238905] [2: system_server: 4318] [SSP] ssp_resume:
<6>[10016.245125] [2: system_server: 4318] [SSP] ssp_send_cmd: command 0xd3 0
<3>[10016.245155] [2: system_server: 4318] vfsspi_wakeup_daemon send signal fa
iled by wakeup(0)
<6>[10016.245187] [2: system_server: 4318] vfsspi_regulator_onoff: ocp on, smc
ret = 0
<6>[10016.248241] [3: system_server: 4318] vfsspi_regulator_onoff: on
<6>[10016.248256] [3: system_server: 4318] vfsspi_pm_resume
<6>[10016.248308] [3: system_server: 4318] wake disabled for irq 4
<6>[10016.248345] [3: system_server: 4318] [VIB] max77843_haptic_resume
<2>[10016.248362] [3: system_server: 4318] Si47xx_resume: device not supported
<6>[10016.248381] [3: system_server: 4318] wake disabled for irq 7
<6>[10016.248599] [3: system_server: 4318] max86900_pm_resume
<6>[10016.250520] [3: system_server: 4318] s2m_rtc_update: RTC_UPDATE_REGISTER
check : 0x00
<6>[10016.250662] [3: system_server: 4318] s2m-rtc s2m-rtc: s2m_rtc_read_time:
2016-11-17 16:21:07(0x10)PM
<6>[10016.255462] [2: system_server: 4318] exynos-pcie 15660000.pcie1: exynos_
pcie_poweron, start of poweron, pcie state: 0
<7>[10016.269029] [3: kworker/u16:3: 8924] s5p-ehci 15510000.usb: port 2 reset
complete, port enabled
<7>[10016.269056] [3: kworker/u16:3: 8924] s5p-ehci 15510000.usb: GetStatus po
rt:2 status 001005 0 ACK POWER sig=se0 PE CONNECT

<6>[10016.276347] [2: system_server: 4318] exynos-pcie 15660000.pcie1: D state


: 0, bc7700
<6>[10016.277625] [2: system_server: 4318] exynos-pcie 15660000.pcie1: exynos_
pcie_reset: Link up : 0x03c1b711
<6>[10016.277940] [2: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL: 2010
<6>[10016.277955] [2: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL: 42
<6>[10016.277965] [2: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL: 0
<6>[10016.277981] [2: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_RTCT
L: 0
<6>[10016.277997] [2: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL2: 400
<6>[10016.278012] [2: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL2: 1
<6>[10016.278023] [2: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL2: 0
<6>[10016.278047] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x3c (was 0x1ff, writing 0x101ed)
<6>[10016.278071] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x38 (was 0x0, writing 0x0)
<6>[10016.278088] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x34 (was 0x40, writing 0x40)
<6>[10016.278104] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x30 (was 0x0, writing 0x0)
<6>[10016.278122] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x2c (was 0x0, writing 0x0)
<6>[10016.278138] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x28 (was 0x0, writing 0x0)
<6>[10016.278289] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x24 (was 0x0, writing 0x0)
<6>[10016.278306] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x20 (was 0x1ff01c00, writing 0x1ff01c00)
<6>[10016.278323] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x1c (was 0x0, writing 0x0)
<6>[10016.278340] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x18 (was 0x10100, writing 0x10100)
<6>[10016.278357] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x14 (was 0x0, writing 0x0)
<6>[10016.278374] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x10 (was 0x0, writing 0x0)
<6>[10016.278390] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0xc (was 0x10000, writing 0x10010)
<6>[10016.278413] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x8 (was 0x1, writing 0x6040001)
<6>[10016.278436] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x4 (was 0x100107, writing 0x100147)
<6>[10016.278458] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x0 (was 0xa575144d, writing 0xa575144d)
<6>[10016.278522] [2: system_server: 4318] exynos-pcie 15660000.pcie1: exynos_
pcie_poweron, end of poweron, pcie state: 3
<4>[10016.278538] [2: system_server: 4318] dhdpcie_resume_dev: Enter
<6>[10016.278665] [2: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_DEVCTL:
2c10
<6>[10016.278768] [2: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_LNKCTL:
142
<6>[10016.278778] [2: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_SLTCTL:
0
<6>[10016.278787] [2: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_RTCTL:

0
<6>[10016.278965] [2: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_DEVCTL2
: 400
<6>[10016.279086] [2: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_LNKCTL2
: 1
<6>[10016.279096] [2: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_SLTCTL2
: 0
<6>[10016.279244] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x3c (was 0x100, writing 0x1ed)
<6>[10016.279723] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x38 (was 0x0, writing 0x0)
<6>[10016.279828] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x34 (was 0x48, writing 0x48)
<6>[10016.279932] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x30 (was 0x0, writing 0x0)
<6>[10016.280037] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x2c (was 0x77414e4, writing 0x77414e4)
<6>[10016.280141] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x28 (was 0x0, writing 0x0)
<6>[10016.280246] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x24 (was 0x0, writing 0x0)
<6>[10016.280350] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x20 (was 0x0, writing 0x0)
<6>[10016.280454] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x1c (was 0x0, writing 0x0)
<6>[10016.280560] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x18 (was 0x4, writing 0x1c400004)
<6>[10016.280758] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x18 (writing 0x1c400004)
<6>[10016.280861] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x14 (was 0x0, writing 0x0)
<6>[10016.280965] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x10 (was 0x4, writing 0x1c200004)
<6>[10016.281162] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x10 (writing 0x1c200004)
<6>[10016.281267] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0xc (was 0x0, writing 0x10)
<6>[10016.281464] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x8 (was 0x2800003, writing 0x2800003)
<6>[10016.281569] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x4 (was 0x100000, writing 0x100146)
<6>[10016.281769] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x0 (was 0x43e914e4, writing 0x43e914e4)
<6>[10016.282331] [3: kworker/u16:3: 8924] usb 1-2: reset high-speed USB devic
e number 2 using s5p-ehci
<4>[10016.283265] [2: system_server: 4318] dhdpcie_send_mb_data: H2D_MB_DATA:
0x00000010
<4>[10016.283299] [2: system_server: 4318] dhdpcie_send_mb_data: send H2D_HOST
_D0_INFORM to dongle
<4>[10016.287185] I[0:
swapper/0:
0] dhd_prot_flow_ring_delete sending F
LOW RING ID 41 for peer 33:35:ba prio 0 ifindex 0 Delete req msglen 40
<6>[10016.287850] [0:wl_event_handle: 5324] CFG80211-INFO2) wl_is_linkdown : Li
nk down Reason : WLC_E_LINK
<6>[10016.287875] [0:wl_event_handle: 5324] CFG80211-INFO2) wl_notify_connect_s
tatus : link down if wlan0 may call cfg80211_disconnected. event : 16, reason=1
from ae:a7:b6
<6>[10016.289987] [0:wl_event_handle: 5324] CFG80211-INFO2) wl_get_bss_info : w
pa_auth val 0
<6>[10016.290003] [0:wl_event_handle: 5324] CFG80211-INFO2) wl_get_bss_info : B
SSID:ae:a7:b6 SSID xfinitywifi

<6>[10016.290022] [0:wl_event_handle: 5324] CFG80211-INFO2) wl_get_bss_info : f


req:2412, BW:20, RSSI:-84 dBm, Rate:117 Mbps, 11mode:2, stream:1,MU-MIMO:0, Pass
point:0, SNR:0, Noise:-91,
<6>[10016.290022] [0:wl_event_handle: 5324] akm:0 roam:0
<4>[10016.290064] [0:wl_event_handle: 5324] dhd_prot_ioctl: SET PM to 2
<6>[10016.293470] [0:wl_event_handle: 5324] CFG80211-INFO2) wl_is_linkdown : Li
nk down Reason : WLC_E_LINK
<4>[10016.296117] [0:
kworker/0:0:13589] regulatory is not upadted via resto
re_regulatory_settings.
<7>[10016.300343] [0: kworker/u16:3: 8924] usb 1-2: USB quirks for this device
: 100
<6>[10016.304925] [0: kworker/u16:3: 8924] [CHKRA:5]>
<6>[10016.305467] [0: system_server: 4318] PM: resume of devices complete afte
r 158.045 msecs
<6>[10016.306915] I[0: system_server: 4318] [NACB:5]<
<6>[10016.306926] I[0: system_server: 4318] notification_available_cb: set lpa
handling to false
<6>[10016.306959] I[0: system_server: 4318] [CHKRA:5]>
<7>[10016.311270] [0: system_server: 4318] PM: Finishing wakeup.
<7>[10016.312460] [3:
khubd: 742] hub 1-0:1.0: state 7 ports 2 chg 00
04 evt 0000
<6>[10016.312527] [3:
khubd: 742] hub 1-0:1.0: port 2, status 0503, c
hange 0000, 480 Mb/s
<3>[10016.316468] [0:
mdm_helper: 3355] esoc REQ enginer waiting on request
<4>[10016.311285] [2:onic.tuiservice: 659] Restarting tasks ...
t-base-tui module: ioctl 0x80047402 <6>[10016.321586] [2:onic.tuiservice: 659]
TUI_IO_WAITCMD
<6>[10016.322469] [0: wpa_supplicant: 5196] CFG80211-INFO2) wl_cfg80211_get_bss
_info : cmd: ae:34:26 2412 20 -84 117 2 1 0 0 0 -91 0 0
<6>[10016.326370] [0: wpa_supplicant: 5196] rtmsg : wlan0[1003]
<4>[10016.327444] [0: system_server: 4318] done.
<3>[10016.327473] [3:DnsConfigServic: 9744] [RMNET:HI] rmnet_vnd_ioctl(): Unkow
n IOCTL 0x00008B01
<6>[10016.329780] [0:
kworker/0:2:31050] exynos-dwc3 15400000.usb: dwc3_exyn
os_runtime_suspend
<6>[10016.329981] [0: thread_hotplug:19241] frequency info : 1200000, prev_cmd
1, exe_cmd 4
<6>[10016.329998] [0: thread_hotplug:19241] lcd is on : 0, low power mode = 0,
dm_hotplug disable = 0
<6>[10016.330011] [0: thread_hotplug:19241] cluster1 cores hotplug out : 0
<7>[10016.330754] [0:
kworker/0:0:13589] max77843_fg_write_temp: temperature
to (281, 0x1c19)
<3>[10016.330817] [3:DnsConfigServic: 6258] [RMNET:HI] rmnet_vnd_ioctl(): Unkow
n IOCTL 0x00008B01
<6>[10016.331216] [0:
kworker/0:0:13589] max77843_fg_check_qrtable: QRTABLE2
0_REG(0x1603), QRTABLE30_REG(0x1005)
<6>[10016.332822] [0:
kworker/0:0:13589] power_supply battery: power_supply_
changed
<6>[10016.332860] [0:
kworker/0:0:13589] Skip monitor work(46, Vnow:4081mV,
Tbat:281)
<6>[10016.333018] [0:
kworker/0:0:13589] sec_bat_get_property cable type = 1
sleep_mode = 0
<6>[10016.333048] [0:
kworker/0:0:13589] sec_bat_get_property cable type = 1
<6>[10016.334370]
equest
<6>[10016.334403]
<6>[10016.334554]
7.698823397 UTC
<6>[10016.336438]

[3: system_server: 4318] mdm_hsic_pm_notify_event: unblock r


[3: system_server: 4318] request_active_lock_set
[3: system_server: 4318] PM: suspend exit 2016-11-17 16:21:0
[1:

healthd: 3346] sec_bat_get_property cable type = 1

sleep_mode = 0
<12>[10016.337000] [1:
healthd: 3346] healthd: battery l=98 v=4081 t=28.
1 h=2 st=3 c=0 o=1 ca=-256 ct=0 ps=0 chg= 2016-11-17 16:21:07.701195522 UTC
<12>[10016.337044] [1:
healthd: 3346] healthd: battery l=98 v=4081 t=28.
1 h=2 st=3 c=0 o=1 ca=-256 ct=0 ps=0 chg= 2016-11-17 16:21:07.701195522 UTC hv=0
sec=0 chg=
<14>[10016.337072] [1:
healthd: 3346] healthd-android: healthd_mode_andr
oid_battery_update
<14>[10016.337099] [1:
healthd: 3346] BatteryPropertiesRegistrar: notify
Listeners : start
<14>[10016.337129] [1:
healthd: 3346] IBatteryPropertiesListener : batte
ryPropertiesChanged!
<14>[10016.337129] [1:
healthd: 3346] : BatteryPropertiesRegistrar: noti
fyListeners : done
<6>[10016.342319] [1: wpa_supplicant: 5196] [dhd] dhd_suspend_resume_helper
<6>[10016.342341] [1: wpa_supplicant: 5196] [dhd] dhd_set_suspend
<4>[10016.342355] [1: wpa_supplicant: 5196] dhd_set_suspend: force extra Suspen
d setting
<4>[10016.342378] [1: wpa_supplicant: 5196] dhd_prot_ioctl: SET PM to 1
<4>[10016.343601] [1: wpa_supplicant: 5196] dhd_enable_packet_filter: enter, va
lue = 1
<6>[10016.343625] [1: wpa_supplicant: 5196] [dhd] suspend bcn_li_dtim: 0
<6>[10016.350271] [2: wpa_supplicant: 5196] CFG80211-TRACE) wl_cfg80211_set_btc
oex_dhcp : DHCP is complete
<6>[10016.350296] [2: wpa_supplicant: 5196] CFG80211-TRACE) wl_cfg80211_set_btc
oex_dhcp : DHCP is complete , enable packet filter!!!
<4>[10016.350309] [2: wpa_supplicant: 5196] dhd_enable_packet_filter: enter, va
lue = 1
<6>[10016.352251] [1: kworker/u16:0: 4939] mdm_hsic_rpm_check
<6>[10016.352279] [1: kworker/u16:0: 4939] mdm_hsic_rpm_restart
<3>[10016.398281] [3:DnsConfigServic: 9744] [RMNET:HI] rmnet_vnd_ioctl(): Unkow
n IOCTL 0x00008B01
<6>[10016.412942] [3: system_server: 3995] [SSP] set_sensors_enable: new_enabl
e = 8704, old_enable = 8192
<6>[10016.412964] [3: system_server: 3995] [SSP] enable_sensor: add 512, New =
200000000ns
<6>[10016.412986] [3: system_server: 3995] [SSP] send_instruction: Inst = 0xa1
, Sensor Type = 0x9, data = 200
<6>[10016.419880] [3: system_server: 3995] [SSP] enable_sensor: delay 200, tim
eout 0, flag=0, ret1
<6>[10016.427195] [0: wpa_supplicant: 5196] CFG80211-TRACE) __wl_cfg80211_scan
: START SCAN
<6>[10016.432453] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10016.432508] [3:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[10016.432528] [3:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[10016.432548] [3:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[10016.432742] [3:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<3>[10016.447743] [3:DnsConfigServic: 6258] [RMNET:HI] rmnet_vnd_ioctl(): Unkow
n IOCTL 0x00008B01
<6>[10016.528902] [0: thread_hotplug:19241] frequency info : 1500000, prev_cmd
4, exe_cmd 0
<6>[10016.528921] [0: thread_hotplug:19241] lcd is on : 0, low power mode = 0,
dm_hotplug disable = 0
<6>[10016.528932] [0: thread_hotplug:19241] cluster1 cores hotplug out : 0
<4>[10016.529544] [5:
swapper/5:
0] CPU5: Booted secondary processor

<4>[10016.531036] [6:
swapper/6:
0]
<4>[10016.532477] [7:
swapper/7:
0]
<6>[10016.593939] [2:wl_event_handle: 5324]
SCAN COMPLETED: scanned AP count=16
<6>[10016.603568] [1: irq/15-SSP_Int: 1775]
<6>[10016.603568] [1: irq/15-SSP_Int: 1775]
<6>[10016.603568] [1: irq/15-SSP_Int: 1775]
<6>[10016.603568] [1: irq/15-SSP_Int: 1775]
<6>[10016.603568] [1: irq/15-SSP_Int: 1775]
<6>[10016.603568] [1: irq/15-SSP_Int: 1775]
gain=3 lux=195
<6>[10016.605760] [3: mSvcLEDThread: 4330]
e = 8192, old_enable = 8704
<6>[10016.605794] [3: mSvcLEDThread: 4330]
sor = 512, current state = 8192
<6>[10016.605819] [3: mSvcLEDThread: 4330]
, Sensor Type = 0x9, data = 200
<6>[10016.632286] [0: thread_hotplug:19241]
, exe_cmd 1
<6>[10016.632317] [0: thread_hotplug:19241]
dm_hotplug disable = 0
<6>[10016.632335] [0: thread_hotplug:19241]
<4>[10016.634146] [7:
migration/7: 43]
<5>[10016.635317] [0: thread_hotplug:19241]
<4>[10016.638345] [6:
migration/6: 38]
<5>[10016.639205] [0: thread_hotplug:19241]
<5>[10016.641973] [0: thread_hotplug:19241]
<5>[10016.644450] [0: thread_hotplug:19241]
<5>[10016.648403] [0: thread_hotplug:19241]
<6>[10016.749007] [0: thread_hotplug:19241]
1, exe_cmd 4
<6>[10016.749035] [0: thread_hotplug:19241]
dm_hotplug disable = 0
<6>[10016.749051] [0: thread_hotplug:19241]
<4>[10016.749655] [3:
swapper/3:
0]
<6>[10016.821178] [1:
kworker/1:4:14113]
=> (set_volt: 575000, get_volt: 575000)
<6>[10016.822993] [1:
kworker/1:4:14113]
volt: 650000, get_volt: 650000)
<7>[10016.823438] [0:
kworker/0:0:13589]
<6>[10016.824369] [1:
kworker/1:4:14113]
=> 650000
<6>[10016.824417] [1:
kworker/1:4:14113]
emp : 32
<7>[10016.835814] [0:
kworker/0:0:13589]
<7>[10016.835889] [0:
kworker/0:0:13589]
1
<7>[10016.835941] [0:
kworker/0:0:13589]
hub
<3>[10016.837296] [0:
kworker/0:0:13589]
time_suspend
<6>[10016.848940] [0: thread_hotplug:19241]
, exe_cmd 1
<6>[10016.848990] [0: thread_hotplug:19241]
dm_hotplug disable = 0
<6>[10016.849028] [0: thread_hotplug:19241]
<7>[10016.849466] [0:
kworker/0:0:13589]
amsung_usb2phy_runtime_suspend
<6>[10016.849539] [0:
kworker/0:0:13589]
<6>[10016.849605] [0:
kworker/0:0:13589]

CPU6: Booted secondary processor


CPU7: Booted secondary processor
CFG80211-TRACE) wl_escan_handler :
[SSP] [M] A
AD 0 4 1 4,
AR-0,-45,
save bak odr 9, 0, 180, 180, 20
AD 9 1 0 1, 180
#>r=132 g=83 b=76 c=288 atime=245 a
[SSP] set_sensors_enable: new_enabl
[SSP] ssp_remove_sensor: remove sen
[SSP] send_instruction: Inst = 0xa2
frequency info : 900000, prev_cmd 0
lcd is on : 0, low power mode = 0,
cluster1 cores hotplug out : 0
IRQ155 no longer affine to CPU7
CPU7: shutdown
IRQ154 no longer affine to CPU6
CPU6: shutdown
CPU5: shutdown
CPU4: shutdown
CPU3: shutdown
frequency info : 1000000, prev_cmd
lcd is on : 0, low power mode = 1,
cluster1 cores hotplug out : 0
CPU3: Booted secondary processor
MIF(418000): unset TMU_COLD: 612500
DISP(100000): unset TMU_COLD: (set_
usb 1-2: usb auto-suspend, wakeup 1
INT(100000): unset TMU_COLD: 687500
tmu temperature state 1 to 0, cur_t
hub 1-0:1.0: hub_suspend
usb usb1: bus auto-suspend, wakeup
s5p-ehci 15510000.usb: suspend root
s5p-ehci 15510000.usb: s5p_ehci_run
frequency info : 400000, prev_cmd 4
lcd is on : 0, low power mode = 0,
cluster1 cores hotplug out : 0
samsung-usb2phy 15530000.usb2phy: s
request_active_lock_release
s5p_ehci_runtime_suspend: usage=0,

child=0
<6>[10016.850022] [3: system_server: 4318] PM: suspend entry 2016-11-17 16:21:
08.214280157 UTC
<5>[10016.854870] [0: thread_hotplug:19241] CPU3: shutdown
<6>[10016.850066] [1: system_server: 4318] PM: Syncing filesystems ... done.
<7>[10016.864923] [1: system_server: 4318] PM: Preparing system for mem sleep
<6>[10016.865259] [2: system_server: 4318] exynos_dm_hotplug_notifier, 958 : d
ynamic_hotplug CMD_SLEEP_PREPARE
<6>[10016.865308] [2: system_server: 4318] nr_sleep_prepare_cpus : 4, tmp_nr_s
leep_prepare_cpus : 5
<4>[10016.866674] [3:
swapper/3:
0] CPU3: Booted secondary processor
<4>[10016.870027] [4:
swapper/4:
0] CPU4: Booted secondary processor
<6>[10016.871622] [0: thread_hotplug:19241] stopped thread_hotplug
<6>[10016.878310] [0: system_server: 4318] MIF(635000): set TMU_COLD: 637500 =
> (set_volt: 675000, get_volt: 675000)
<6>[10016.879104] [0: system_server: 4318] DISP(100000): set TMU_COLD: 650000
=> (set_volt: 687500, get_volt: 687500)
<6>[10016.879954] [0: system_server: 4318] INT(100000): set TMU_COLD: 650000 =
> 687500
<6>[10016.879975] [0: system_server: 4318] tmu temperature state 0 to 1
<6>[10016.880001] [0: system_server: 4318] mdm_hsic_pm_notify_event: block req
uest
<3>[10016.881533] [1:
mdm_helper: 3355] esoc REQ engine released from wait
<4>[10016.881009] [0: system_server: 4318] Freezing user space processes ...
<6>[10016.883574] [0: system_server: 4318] last active wakeup source: eventpol
l
<4>[10016.883601] [0: system_server: 4318]
<3>[10016.883617] [0: system_server: 4318] Freezing of tasks aborted after 0.0
02 seconds
<3>[10016.883919] [2:
mdm_helper: 3355] esoc REQ enginer waiting on request
<4>[10016.883635] [2:onic.tuiservice: 659] Restarting tasks ...
t-base-tui module: ioctl 0x80047402 <6>[10016.885440] [2:onic.tuiservice: 659]
TUI_IO_WAITCMD
<4>[10016.886009] [0: system_server: 4318] done.
<5>[10016.888596] [0: thread_hotplug:19272] CPU2: shutdown
<6>[10016.890602] [0: thread_hotplug:19272] MobiCore mcd: <- core_num=0x0000000
0, active_cpu=0x00000001
<6>[10016.890697] [1:
mc_fastcall: 1747] MobiCore mcd: CoreSwap ok 1 -> 0
<5>[10016.892932] [0: thread_hotplug:19272] CPU1: shutdown
<6>[10016.894681] [0: system_server: 4318] mdm_hsic_pm_notify_event: unblock r
equest
<6>[10016.894712] [0: system_server: 4318] request_active_lock_set
<6>[10016.894818] [3: system_server: 4318] PM: suspend exit 2016-11-17 16:21:0
8.259088995 UTC
<6>[10016.912305] [0: kworker/u16:6:32449] mdm_hsic_rpm_check
<7>[10016.912391] [0: kworker/u16:6:32449] s5p-ehci 15510000.usb: s5p_ehci_run
time_resume
<6>[10016.912433] [0: kworker/u16:6:32449] request_active_lock_set
<7>[10016.912490] [0: kworker/u16:6:32449] samsung-usb2phy 15530000.usb2phy: s
amsung_usb2phy_runtime_resume
<6>[10016.912576] [0: kworker/u16:6:32449] s5p_ehci_runtime_resume: usage=1, c
hild=0
<7>[10016.912634] [0: kworker/u16:6:32449] usb usb1: usb auto-resume
<7>[10016.912684] [0: kworker/u16:6:32449] s5p-ehci 15510000.usb: resume root
hub
<7>[10016.912732] [0: kworker/u16:6:32449] s5p-ehci 15510000.usb: LRESET 0
<7>[10016.935783] [0: kworker/u16:6:32449] hub 1-0:1.0: hub_resume
<7>[10016.935896] [0: kworker/u16:6:32449] hub 1-0:1.0: port 2: status 0503 ch
ange 0000
<7>[10016.936012] [0: kworker/u16:6:32449] usb 1-2: finish resume

<7>[10016.936119] [3:
khubd: 742] hub 1-0:1.0: state 7 ports 2 chg 00
00 evt 0000
<6>[10016.938943] [0: kworker/u16:6:32449] [CHKRA:5]>
<6>[10016.939150] [0: kworker/u16:6:32449] mdm_hsic_rpm_restart
<6>[10016.992374] [0: thread_hotplug:19272] frequency info : 400000, prev_cmd 1
, exe_cmd 4
<6>[10016.992426] [0: thread_hotplug:19272] lcd is on : 0, low power mode = 1,
dm_hotplug disable = 0
<6>[10016.992463] [0: thread_hotplug:19272] cluster1 cores hotplug out : 0
<4>[10016.993499] [1:
swapper/1:
0] CPU1: Booted secondary processor
<6>[10016.995829] [0: thread_hotplug:19272] MobiCore mcd: <- core_num=0x0000000
1, active_cpu=0x00000000
<6>[10016.995989] [0:
mc_fastcall: 1747] MobiCore mcd: CoreSwap ok 0 -> 1
<4>[10016.997261] [2:
swapper/2:
0] CPU2: Booted secondary processor
<6>[10017.435759] [0: kworker/u16:0: 4939] [mhi_initiate_m3] Entered MHI state
4, Pending M0 0 Pending M3 0
<6>[10017.435827] [0: kworker/u16:0: 4939] [mhi_initiate_m3] Triggering wake o
ut of M2
<6>[10017.437849] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26500
<6>[10017.437912] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10017.438124] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[10017.438176] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[10017.438223] [0:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[10017.442681] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[10017.442821] [1: kworker/u16:0: 4939] [mhi_initiate_m3] Cancelled M1 time
r, timer was active
<6>[10017.443064] [1: kworker/u16:0: 4939] [mhi_initiate_m3] Waiting for M3 co
mpletion.
<7>[10017.451543] [0:
kworker/0:0:13589] usb 1-2: usb auto-suspend, wakeup 1
<6>[10017.456180] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10017.456422] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 5
<6>[10017.456473] [1:MHI_STATE_THREA: 4605] [process_M3_transition] Processing
M3 state transition
<6>[10017.456726] [2: kworker/u16:0: 4939] [mhi_initiate_m3] M3 completion rec
eived
<6>[10017.456794] [2: kworker/u16:0: 4939] [mhi_turn_off_pcie_link] Entered...
<7>[10017.462495] [0:
kworker/0:0:13589] hub 1-0:1.0: hub_suspend
<7>[10017.462568] [0:
kworker/0:0:13589] usb usb1: bus auto-suspend, wakeup
1
<7>[10017.462620] [0:
kworker/0:0:13589] s5p-ehci 15510000.usb: suspend root
hub
<3>[10017.463353] [0:
kworker/0:0:13589] s5p-ehci 15510000.usb: s5p_ehci_run
time_suspend
<6>[10017.469223] [2: kworker/u16:0: 4939] mhi 0000:01:00.0: [debug] pmcsr reg
: b dev->current_state : 0
<6>[10017.469406] [2: kworker/u16:0: 4939] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[10017.469520] [2: kworker/u16:0: 4939] exynos-pcie 10ee0000.pcie0: ack mes
sage is ok
<6>[10017.469567] [2: kworker/u16:0: 4939] exynos-pcie 10ee0000.pcie0: receive
d Enter_L23_READY DLLP packet
<6>[10017.469622] [2: kworker/u16:0: 4939] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[10017.469799] [2: kworker/u16:0: 4939] exynos-pcie 10ee0000.pcie0: exynos_

pcie_poweroff, end of poweroff, pcie state: 0


<7>[10017.475730] [0:
kworker/0:0:13589] samsung-usb2phy 15530000.usb2phy: s
amsung_usb2phy_runtime_suspend
<6>[10017.475798] [0:
kworker/0:0:13589] request_active_lock_release
<6>[10017.475867] [0:
kworker/0:0:13589] s5p_ehci_runtime_suspend: usage=0,
child=0
<6>[10017.476304] [3: system_server: 4318] PM: suspend entry 2016-11-17 16:21:
08.840563928 UTC
<6>[10017.476347] [3: system_server: 4318] PM: Syncing filesystems ... done.
<7>[10017.485682] [3: system_server: 4318] PM: Preparing system for mem sleep
<6>[10017.486000] [0: system_server: 4318] exynos_dm_hotplug_notifier, 958 : d
ynamic_hotplug CMD_SLEEP_PREPARE
<6>[10017.486049] [0: system_server: 4318] nr_sleep_prepare_cpus : 4, tmp_nr_s
leep_prepare_cpus : 5
<6>[10017.486122] [0: thread_hotplug:19272] stopped thread_hotplug
<6>[10017.493449] [1: system_server: 4318] mdm_hsic_pm_notify_event: block req
uest
<3>[10017.494390] [2:
mdm_helper: 3355] esoc REQ engine released from wait
<4>[10017.494050] [0: system_server: 4318] Freezing user space processes ... (
elapsed 0.005 seconds) done.
<6>[10017.499796] [2: kworker/u16:0: 4939] [mhi_turn_off_pcie_link] Exited...
<4>[10017.499681] [0: system_server: 4318] Freezing remaining freezable tasks
... (elapsed 0.005 seconds) done.
<7>[10017.505455] [0: system_server: 4318] PM: Entering mem sleep
<4>[10017.505475] [0: system_server: 4318] Suspending console(s) (use no_conso
le_suspend to debug)
<6>[10017.506862] [0: system_server: 4318] exynos-dwc3 15400000.usb: dwc3_exyn
os_runtime_resume
<6>[10017.508302] [3: kworker/u16:31:32555] [mhi_suspend] [mhi_suspend]
<6>[10017.508325] [3: kworker/u16:31:32555] [mhi_suspend] Entered, sys state 2,
MHI state 5
<6>[10017.508344] [3: kworker/u16:31:32555] [mhi_initiate_m3] Entered MHI state
5, Pending M0 0 Pending M3 0
<4>[10017.508356] [0: system_server: 4318] dhdpcie_send_mb_data: H2D_MB_DATA:
0x00000001
<6>[10017.508368] [3: kworker/u16:31:32555] [mhi_initiate_m3] MHI state 5, link
state 0.
<4>[10017.512945] [0: system_server: 4318] dhdpcie_send_mb_data: send H2D_HOST
_D3_INFORM to dongle
<4>[10017.513433] I[0:
swapper/0:
0] D2H_MB_DATA: 0x00000001
<4>[10017.513449] I[0:
swapper/0:
0] dhdpcie_handle_mb_data D2H_MB_DATA:
Received D3 ACK
<4>[10017.513643] [0: system_server: 4318] dhdpcie_send_mb_data: H2D_MB_DATA:
0x00000008
<4>[10017.513842] [0: system_server: 4318] dhdpcie_send_mb_data: send H2D_HOST
_D0_INFORM_IN_USE to dongle
<4>[10017.513865] [0: system_server: 4318] dhdpcie_suspend_dev: Enter
<6>[10017.514115] [0: system_server: 4318] pcieh 0001:01:00.0: reg offset: 0:
43e914e4
<6>[10017.514318] [0: system_server: 4318] pcieh 0001:01:00.0: reg offset: 4:
100146
<6>[10017.514526] [0: system_server: 4318] pcieh 0001:01:00.0: reg offset: 8:
2800003
<6>[10017.514751] [0: system_server: 4318] pcieh 0001:01:00.0: reg offset: 12:
10
<6>[10017.514939] [0: system_server: 4318] pcieh 0001:01:00.0: reg offset: 16:
1c200004
<6>[10017.515149] [0: system_server: 4318] pcieh 0001:01:00.0: reg offset: 20:
0
<6>[10017.515359] [0: system_server: 4318] pcieh 0001:01:00.0: reg offset: 24:

1c400004
<6>[10017.515588] [0: system_server:
0
<6>[10017.515774] [0: system_server:
0
<6>[10017.515979] [0: system_server:
0
<6>[10017.516193] [0: system_server:
0
<6>[10017.516400] [0: system_server:
77414e4
<6>[10017.516609] [0: system_server:
0
<6>[10017.516817] [0: system_server:
48
<6>[10017.517023] [0: system_server:
0
<6>[10017.517231] [0: system_server:
1ed
<6>[10017.517438] [0: system_server:
2c10
<6>[10017.517648] [0: system_server:
142
<6>[10017.517661] [0: system_server:
0
<6>[10017.517673] [0: system_server:
0
<6>[10017.517853] [0: system_server:
: 400
<6>[10017.518062] [0: system_server:
: 1
<6>[10017.518074] [0: system_server:
: 0
<6>[10017.520764] [0: system_server:
device_vendor_id reg : 43e914e4
<6>[10017.520968] [0: system_server:
PMCSR reg value: 4108
<6>[10017.521173] [0: system_server:
PMCSR reg value: 410b
<6>[10017.521340] [0: system_server:
device_vendor_id reg : 43e914e4
<6>[10017.532571] [1: system_server:
eg : 410b dev->current_state : 0
<6>[10017.532740] [1: system_server:
vendor_id reg : 43e914e4
<6>[10017.532773] [1: system_server:
0: a575144d
<6>[10017.532792] [1: system_server:
4: 100147
<6>[10017.532809] [1: system_server:
8: 6040001
<6>[10017.532828] [1: system_server:
12: 10010
<6>[10017.532845] [1: system_server:
16: 0
<6>[10017.532863] [1: system_server:
20: 0
<6>[10017.532881] [1: system_server:
24: 10100
<6>[10017.532899] [1: system_server:

4318] pcieh 0001:01:00.0: reg offset: 28:


4318] pcieh 0001:01:00.0: reg offset: 32:
4318] pcieh 0001:01:00.0: reg offset: 36:
4318] pcieh 0001:01:00.0: reg offset: 40:
4318] pcieh 0001:01:00.0: reg offset: 44:
4318] pcieh 0001:01:00.0: reg offset: 48:
4318] pcieh 0001:01:00.0: reg offset: 52:
4318] pcieh 0001:01:00.0: reg offset: 56:
4318] pcieh 0001:01:00.0: reg offset: 60:
4318] pcieh 0001:01:00.0: PCI_EXP_DEVCTL:
4318] pcieh 0001:01:00.0: PCI_EXP_LNKCTL:
4318] pcieh 0001:01:00.0: PCI_EXP_SLTCTL:
4318] pcieh 0001:01:00.0: PCI_EXP_RTCTL:
4318] pcieh 0001:01:00.0: PCI_EXP_DEVCTL2
4318] pcieh 0001:01:00.0: PCI_EXP_LNKCTL2
4318] pcieh 0001:01:00.0: PCI_EXP_SLTCTL2
4318] pcieh 0001:01:00.0: [debug] step 1,
4318] pcieh 0001:01:00.0: [debug] step 2,
4318] pcieh 0001:01:00.0: [debug] step 3,
4318] pcieh 0001:01:00.0: [debug] step 4,
4318] pcieh 0001:01:00.0: [debug] pmcsr r
4318] pcieh 0001:01:00.0: [debug] device_
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:
4318] pcieport 0001:00:00.0: reg offset:

28: 0
<6>[10017.532917] [1: system_server: 4318] pcieport 0001:00:00.0: reg offset:
32: 1ff01c00
<6>[10017.532935] [1: system_server: 4318] pcieport 0001:00:00.0: reg offset:
36: 0
<6>[10017.532953] [1: system_server: 4318] pcieport 0001:00:00.0: reg offset:
40: 0
<6>[10017.532971] [1: system_server: 4318] pcieport 0001:00:00.0: reg offset:
44: 0
<6>[10017.532989] [1: system_server: 4318] pcieport 0001:00:00.0: reg offset:
48: 0
<6>[10017.533007] [1: system_server: 4318] pcieport 0001:00:00.0: reg offset:
52: 40
<6>[10017.533025] [1: system_server: 4318] pcieport 0001:00:00.0: reg offset:
56: 0
<6>[10017.533043] [1: system_server: 4318] pcieport 0001:00:00.0: reg offset:
60: 101ed
<6>[10017.533193] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL: 2010
<6>[10017.533211] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL: 42
<6>[10017.533224] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL: 0
<6>[10017.533241] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_RTCT
L: 0
<6>[10017.533259] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL2: 400
<6>[10017.533277] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL2: 1
<6>[10017.533289] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL2: 0
<6>[10017.533400] [1: system_server: 4318] exynos-pcie 15660000.pcie1: ack mes
sage is ok
<6>[10017.533414] [1: system_server: 4318] exynos-pcie 15660000.pcie1: receive
d Enter_L23_READY DLLP packet
<6>[10017.533435] [1: system_server: 4318] exynos-pcie 15660000.pcie1: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[10017.533546] [1: system_server: 4318] exynos-pcie 15660000.pcie1: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[10017.535825] [0: system_server: 4318] voltage(793750) + volt_offset(37500
) is bigger than max_volt(793750)
<6>[10017.535862] [0: system_server: 4318] voltage(793750) + volt_offset(37500
) is bigger than max_volt(793750)
<6>[10017.536961] [0: system_server: 4318] DEVFREQ(MIF): suspend voltage(79375
0 793750)
<6>[10017.539017] [0: system_server: 4318] s2m_rtc_update: RTC_UPDATE_REGISTER
check : 0x00
<6>[10017.539179] [0: system_server: 4318] s2m-rtc s2m-rtc: s2m_rtc_read_time:
2016-11-17 16:21:09(0x10)PM
<5>[10017.539416] [0: system_server: 4318] sd 0:0:0:0: [sda] Synchronizing SCS
I cache
<6>[10017.544338] [0: system_server: 4318] s2m_rtc_update: RTC_UPDATE_REGISTER
check : 0x00
<6>[10017.544483] [0: system_server: 4318] s2m-rtc s2m-rtc: s2m_rtc_read_time:
2016-11-17 16:21:09(0x10)PM
<6>[10017.545688] [0: system_server: 4318] s2m_rtc_update: RTC_UPDATE_REGISTER
check : 0x00
<6>[10017.545824] [0: system_server: 4318] s2m-rtc s2m-rtc: s2m_rtc_read_time:
2016-11-17 16:21:09(0x10)PM
<6>[10017.545844] [0: system_server: 4318] s2m-rtc s2m-rtc: s2m_rtc_set_alarm:

2016-11-17 16:25:29(0x10)PM
<6>[10017.547132] [0: system_server: 4318] s2m_rtc_update: RTC_UPDATE_REGISTER
check : 0x00
<6>[10017.548414] [0: system_server: 4318] s2m_rtc_update: RTC_UPDATE_REGISTER
check : 0x00
<6>[10017.548760] [0: system_server: 4318] max86900_pm_suspend
<6>[10017.549007] [0: system_server: 4318] wake enabled for irq 7
<2>[10017.549117] [0: system_server: 4318] --------Si47xx i2c driver Si47xx_su
spend called
<2>[10017.549128] [0: system_server: 4318] Si47xx_suspend: device not supporte
d
<6>[10017.549157] [0: system_server: 4318] [VIB] max77843_haptic_suspend
<6>[10017.549171] [0: system_server: 4318] [VIB] max77843_haptic_i2c 0
<6>[10017.549967] [0: system_server: 4318] wake enabled for irq 4
<6>[10017.550071] [0: system_server: 4318] vfsspi_regulator_onoff: ocp off, sm
c ret = 0
<6>[10017.550082] [0: system_server: 4318] vfsspi_regulator_onoff: off
<6>[10017.550101] [0: system_server: 4318] vfsspi_pm_suspend
<6>[10017.550145] [0: system_server: 4318] [SSP] ssp_suspend:
<6>[10017.556602] [0: system_server: 4318] [SSP] ssp_send_cmd: command 0xd4 0
<6>[10017.556767] [0: system_server: 4318] mst_ldo_device_suspend
<6>[10017.556819] [0: system_server: 4318] MST_LDO_DRV]]] suspend
<6>[10017.556828] [0: system_server: 4318] MST_LDO_DRV]]] suspend success afte
r smc : 122f122
<6>[10017.583420] [2: system_server: 4318] [MAX98505_DEBUG] max98505_suspend:
enter
<6>[10017.583503] [2: system_server: 4318] pacific-audio sound.34: pacific_sus
pend_post : set AIF1 port slave
<6>[10017.583559] [2: system_server: 4318] wake enabled for irq 577
<6>[10017.583572] [2: system_server: 4318] wake enabled for irq 580
<4>[10017.583594] [2: system_server: 4318] certify_hall_suspend start
<4>[10017.583609] [2: system_server: 4318] [keys] certify_hall_suspend certify
_status : 0 (detach)
<4>[10017.583627] [2: system_server: 4318] hall_suspend start
<4>[10017.583639] [2: system_server: 4318] [keys] hall_suspend flip_status : 1
(open)
<6>[10017.595965] [0: system_server: 4318] [MIF] usb_phy_prepare_shutdown
<6>[10017.595982] [0: system_server: 4318] dev rdy val = 1
<6>[10017.595993] [0: system_server: 4318] set_host_stat:set host port power s
tatus to [0]
<6>[10017.625964] [0: system_server: 4318] wait_dev_pwr_stat:[PWR OFF]...
<6>[10017.634817] I[0: system_server: 4318] mdm_device_ready_irq_handler, irq:
host ready val : 00000000
<6>[10017.634828] I[0: system_server: 4318] mdm_device_ready_irq_handler, irq:
dev ready val : 00000000
<6>[10017.655930] [0: system_server: 4318] done
<7>[10017.655970] [0: system_server: 4318] samsung-usb2phy 15530000.usb2phy: s
amsung_usb2phy_shutdown: End of setting for shutdown
<6>[10017.656179] [0: system_server: 4318] spi suspend is handled in device su
spend, dma mode = 0, bus_num = 3
<6>[10017.656197] [0: system_server: 4318] spi suspend is handled in device su
spend, dma mode = 0, bus_num = 1
<6>[10017.656271] [0: system_server: 4318] 3s3c24xx_serial_shutdown: port=4 res
et
<6>[10017.657177] [0: system_server: 4318] PM: suspend of devices complete aft
er 149.279 msecs
<6>[10017.657189] [0: system_server: 4318] ---Enabled regulators--<6>[10017.657213] [0: system_server: 4318] LDO1: 1200000uV, 0xffffffea mode, n
ull
<6>[10017.658930] [0: system_server: 4318] VDDIO_1.8V_COMP: 1800000uV, 0xfffff

fea mode, null


<6>[10017.659668] [0: system_server: 4318] VDDD_RET_1.0V_COMP: 700000uV, 0xfff
fffea mode, null
<6>[10017.661189] [0: system_server: 4318] VDD20_1P8_AP: 1800000uV, 0xffffffea
mode, null
<6>[10017.661681] [0: system_server: 4318] VCC_1.8V_CODEC_PMIC: 1800000uV, 0xf
fffffea mode, spi0.0-DBVDD1, spi0.0-AVDD, regulator.47-SUPPLY
<6>[10017.663130] [0: system_server: 4318] regulator-dummy: -22uV, 0xffffffea
mode, null
<6>[10017.663142] [0: system_server: 4318] Always On regulator count :10 [VDD2
2_1P1_2MIC][vdd_ldo8][vdd_mldo][vdd_lldo][vdd_disp_cam0][vdd_int][vdd_apollo][vd
d_atlas][vdd_mif][safeout1_range]
<6>[10017.663153] [0: system_server: 4318] ---Enabled regulator count: 16--<6>[10017.664632] [0: system_server: 4318] PM: late suspend of devices complet
e after 1.464 msecs
<6>[10017.665357] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
0: ffffffff
<6>[10017.665372] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
4: ffffffff
<6>[10017.665385] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
8: ffffffff
<6>[10017.665398] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
12: ffffffff
<6>[10017.665411] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
16: ffffffff
<6>[10017.665424] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
20: ffffffff
<6>[10017.665437] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
24: ffffffff
<6>[10017.665450] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
28: ffffffff
<6>[10017.665462] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
32: ffffffff
<6>[10017.665475] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
36: ffffffff
<6>[10017.665488] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
40: ffffffff
<6>[10017.665571] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
44: ffffffff
<6>[10017.665586] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
48: ffffffff
<6>[10017.665599] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
52: ffffffff
<6>[10017.665612] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
56: ffffffff
<6>[10017.665625] [0: system_server: 4318] pcieport 0001:00:00.0: reg offset:
60: ffffffff
<6>[10017.665638] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL: 0
<6>[10017.665651] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL: 0
<6>[10017.665663] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL: 0
<6>[10017.665676] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_RTCT
L: 0
<6>[10017.665689] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL2: 0
<6>[10017.665701] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL2: 0
<6>[10017.665713] [0: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC

TL2: 0
<6>[10017.666535] [0: system_server: 4318] exynos-pcie 15660000.pcie1: RC1 alr
eady off
<6>[10017.666552] [0: system_server: 4318] exynos-pcie 10ee0000.pcie0: RC0 alr
eady off
<6>[10017.666665] [0: system_server: 4318] spi suspend is handled in suspend_n
oirq, dma mode = 1, bus_num = 4
<6>[10017.666686] [0: system_server: 4318] spi suspend is handled in suspend_n
oirq, dma mode = 1, bus_num = 0
<6>[10017.666884] [0: system_server: 4318] PM: noirq suspend of devices comple
te after 2.236 msecs
<4>[10017.666898] [0: system_server: 4318] Disabling non-boot CPUs ...
<6>[10017.667138] [0: system_server: 4318] MobiCore mcd: <- core_num=0x0000000
0, active_cpu=0x00000001
<6>[10017.667198] [1:
mc_fastcall: 1747] MobiCore mcd: CoreSwap ok 1 -> 0
<5>[10017.668883] [3: system_server: 4318] CPU1: shutdown
<5>[10017.670979] [0: system_server: 4318] CPU2: shutdown
<5>[10017.673147] [0: system_server: 4318] CPU3: shutdown
<5>[10017.675058] [0: system_server: 4318] CPU4: shutdown
<6>[10017.675742] [0: system_server: 4318] [MIF] 1552000Khz
<6>[10017.675742] [0: system_server: 4318] WAKEUP_STAT: 0x80000001
<6>[10017.675742] [0: system_server: 4318] EINT_PEND: 0x20, 0x40 0x00, 0x00
<6>[10017.675742] [0: system_server: 4318] Resume caused by IRQ 580, gpio-keys
: KEY_HOMEPAGE
<6>[10017.675742] [0: system_server: 4318] Suspended for 0.000 seconds
<6>[10017.675866] I[0: system_server: 4318] gpio_keys_gpio_isr before resume by
172
<6>[10017.675899] [0: system_server: 4318] Enabling non-boot CPUs ...
<4>[10017.676065] [1:
swapper/1:
0] CPU1: Booted secondary processor
<6>[10017.676715] [0: system_server: 4318] MobiCore mcd: <- core_num=0x0000000
1, active_cpu=0x00000000
<6>[10017.676764] [0:
mc_fastcall: 1747] MobiCore mcd: CoreSwap ok 0 -> 1
<6>[10017.676800] [0: system_server: 4318] CPU1 is up
<4>[10017.676939] [2:
swapper/2:
0] CPU2: Booted secondary processor
<6>[10017.677524] [0: system_server: 4318] CPU2 is up
<4>[10017.677675] [3:
swapper/3:
0] CPU3: Booted secondary processor
<6>[10017.678229] [0: system_server: 4318] CPU3 is up
<4>[10017.678456] [4:
swapper/4:
0] CPU4: Booted secondary processor
<6>[10017.679226] [0: system_server: 4318] CPU4 is up
<6>[10017.679427] [0: system_server: 4318] spi resume is handled in resume_noi
rq, dma mode = 1, bus_num = 0
<6>[10017.679486] [0: system_server: 4318] spi resume is handled in resume_noi
rq, dma mode = 1, bus_num = 4
<6>[10017.685506] [0: kworker/0:3H:27247] HOME key is pressed
<6>[10017.692179] [1: system_server: 4318] pcieport 0001:00:00.0: [debug] pmcs
r reg : ffff dev->current_state : 3
<6>[10017.692191] [1: system_server: 4318] pcieport 0001:00:00.0: [debug] devi
ce_vendor_id reg : ffffffff
<6>[10017.692203] [1: system_server: 4318] pcieport 0001:00:00.0: Refused to c
hange power state, currently in D3, PCI_PM_CTRL=ffff
<6>[10017.692216] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL: 0
<6>[10017.692227] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL: 0
<6>[10017.692236] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL: 0
<6>[10017.692245] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_RTCT
L: 0
<6>[10017.692255] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL2: 0

<6>[10017.692264] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC


TL2: 0
<6>[10017.692274] [1: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL2: 0
<6>[10017.692285] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x3c (was 0xffffffff, writing 0xffffffff)
<6>[10017.692297] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x38 (was 0xffffffff, writing 0xffffffff)
<6>[10017.692308] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x34 (was 0xffffffff, writing 0xffffffff)
<6>[10017.692319] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x30 (was 0xffffffff, writing 0xffffffff)
<6>[10017.692329] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x2c (was 0xffffffff, writing 0xffffffff)
<6>[10017.692340] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x28 (was 0xffffffff, writing 0xffffffff)
<6>[10017.692351] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x24 (was 0xffffffff, writing 0xffffffff)
<6>[10017.692362] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x20 (was 0xffffffff, writing 0xffffffff)
<6>[10017.692373] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x1c (was 0xffffffff, writing 0xffffffff)
<6>[10017.692384] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x18 (was 0xffffffff, writing 0xffffffff)
<6>[10017.692394] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x14 (was 0xffffffff, writing 0xffffffff)
<6>[10017.692405] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x10 (was 0xffffffff, writing 0xffffffff)
<6>[10017.692416] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0xc (was 0xffffffff, writing 0xffffffff)
<6>[10017.692426] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x8 (was 0xffffffff, writing 0xffffffff)
<6>[10017.692437] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x4 (was 0xffffffff, writing 0xffffffff)
<6>[10017.692448] [1: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x0 (was 0xffffffff, writing 0xffffffff)
<6>[10017.692470] [1: system_server: 4318] pcieh 0001:01:00.0: [debug] step 1,
device_vendor_id reg : ffffffff
<6>[10017.692480] [1: system_server: 4318] pcieh 0001:01:00.0: [debug] step 2,
PMCSR reg value: ffff
<6>[10017.692490] [1: system_server: 4318] pcieh 0001:01:00.0: [debug] step 3,
PMCSR reg value: 0
<6>[10017.692500] [1: system_server: 4318] pcieh 0001:01:00.0: [debug] step 4,
device_vendor_id reg : ffffffff
<6>[10017.705502] [1: system_server: 4318] pcieh 0001:01:00.0: [debug] pmcsr r
eg : ffff dev->current_state : 3
<6>[10017.705512] [1: system_server: 4318] pcieh 0001:01:00.0: [debug] device_
vendor_id reg : ffffffff
<6>[10017.705523] [1: system_server: 4318] pcieh 0001:01:00.0: Refused to chan
ge power state, currently in D3, PCI_PM_CTRL=ffff
<6>[10017.705535] [1: system_server: 4318] exynos-pcie 15660000.pcie1: PCIE li
nk state is 0
<6>[10017.705546] [1: system_server: 4318] pcieh 0001:01:00.0: [debug] setp 5,
PMCSR reg value: ffff
<6>[10017.705557] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_DEVCTL:
2c10
<6>[10017.705567] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_LNKCTL:
142
<6>[10017.705576] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_SLTCTL:
0

<6>[10017.705585] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_RTCTL:


0
<6>[10017.705595] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_DEVCTL2
: 400
<6>[10017.705604] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_LNKCTL2
: 1
<6>[10017.705612] [1: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_SLTCTL2
: 0
<6>[10017.705623] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x3c (was 0xffffffff, writing 0x1ed)
<6>[10017.705635] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x38 (was 0xffffffff, writing 0x0)
<6>[10017.705646] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x34 (was 0xffffffff, writing 0x48)
<6>[10017.705657] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x30 (was 0xffffffff, writing 0x0)
<6>[10017.705668] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x2c (was 0xffffffff, writing 0x77414e4)
<6>[10017.705679] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x28 (was 0xffffffff, writing 0x0)
<6>[10017.705690] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x24 (was 0xffffffff, writing 0x0)
<6>[10017.732793] I[0:
swapper/0:
0] gpio_keys_gpio_isr before resume by
172
<6>[10017.735660] [1: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x20 (was 0xffffffff, writing 0x0)
<6>[10017.763249] [4: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x1c (was 0xffffffff, writing 0x0)
<6>[10017.793223] [4: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x18 (was 0xffffffff, writing 0x1c400004)
<6>[10017.823194] [4: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x14 (was 0xffffffff, writing 0x0)
<6>[10017.853165] [4: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x10 (was 0xffffffff, writing 0x1c200004)
<6>[10017.883136] [4: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0xc (was 0xffffffff, writing 0x10)
<6>[10017.883147] [4: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x8 (was 0xffffffff, writing 0x2800003)
<6>[10017.883157] [4: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x4 (was 0xffffffff, writing 0x100146)
<6>[10017.883166] [4: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x0 (was 0xffffffff, writing 0x43e914e4)
<6>[10017.895500] [4: system_server: 4318] pcieport 0000:00:00.0: [debug] pmcs
r reg : ffff dev->current_state : 3
<6>[10017.895510] [4: system_server: 4318] pcieport 0000:00:00.0: [debug] devi
ce_vendor_id reg : ffffffff
<6>[10017.908824] [4: system_server: 4318] mhi 0000:01:00.0: [debug] pmcsr reg
: ffff dev->current_state : 3
<6>[10017.908834] [4: system_server: 4318] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : ffffffff
<6>[10017.908952] [4: system_server: 4318] PM: noirq resume of devices complet
e after 229.712 msecs
<6>[10017.909341] [4: system_server: 4318] exynos-mailbox 11240000.mailbox: Lo
ading APM firmware ...
<6>[10017.909504] [4: system_server: 4318] OK
<6>[10017.910618] [4: system_server: 4318] PM: early resume of devices complet
e after 1.386 msecs
<6>[10017.910738] [1: kworker/u16:6:32449] [mhi_resume] [mhi_resume]
<6>[10017.910754] [1: kworker/u16:6:32449] [mhi_initiate_m0] Entered MHI state
5, Pending M0 0 Pending M3 0

<6>[10017.910766] [1: kworker/u16:6:32449] [mhi_initiate_m0] Waiting for M0 M1


or M3. Currently 5...
<6>[10017.910775] [1: kworker/u16:6:32449] [mhi_initiate_m0] Wait complete sta
te: 5
<6>[10017.910785] [1: kworker/u16:6:32449] [mhi_turn_on_pcie_link] Entered...
<6>[10017.910798] [1: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, start of poweron, pcie state: 0
<6>[10017.910893] [4: system_server: 4318] s3c2410_wdt: watchdog enabled
<6>[10017.914210] [4: system_server: 4318] spi resume is handled in device res
ume, dma mode = 0, bus_num = 1
<6>[10017.914241] [4: system_server: 4318] spi resume is handled in device res
ume, dma mode = 0, bus_num = 3
<7>[10017.914454] [4: system_server: 4318] samsung-usb2phy 15530000.usb2phy: C
an't configure specified phy mode
<7>[10017.914473] [4: system_server: 4318] samsung-usb2phy 15530000.usb2phy: e
nd of samsung_usb2phy_init
<7>[10017.914484] [4: system_server: 4318] samsung-usb2phy 15530000.usb2phy: s
amsung_usb2phy_runtime_resume
<4>[10017.914504] [4: system_server: 4318] usb usb1: root hub lost power or wa
s reset
<7>[10017.914523] [4: system_server: 4318] s5p-ehci 15510000.usb: reset comman
d 0080b02 park=3 ithresh=8 period=1024 Reset HALT
<6>[10017.914538] [4: system_server: 4318] dev rdy val = 0
<6>[10017.914544] [4: system_server: 4318] set_host_stat:set host port power s
tatus to [1]
<6>[10017.914554] [4: system_server: 4318] wait_dev_pwr_stat:[PWR ON]...
<6>[10017.931256] I[0:
swapper/0:
0] mdm_device_ready_irq_handler, irq:
host ready val : 00000001
<6>[10017.931267] I[0:
swapper/0:
0] mdm_device_ready_irq_handler, irq:
dev ready val : 00000001
<6>[10017.944515] [4: system_server: 4318] done
<7>[10017.944554] [3: kworker/u16:10:32454] usb usb1: usb resume
<7>[10017.944570] [3: kworker/u16:10:32454] s5p-ehci 15510000.usb: resume root
hub after power loss
<7>[10017.944581] [3: kworker/u16:10:32454] s5p-ehci 15510000.usb: LRESET 0
<7>[10017.944604] [3: kworker/u16:10:32454] hub 1-0:1.0: hub_reset_resume
<7>[10017.944615] [3: kworker/u16:10:32454] hub 1-0:1.0: enabling power on all
ports
<6>[10017.949165] [1: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: D state
: 0, 52b400
<6>[10017.974715] [1: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: exynos_
pcie_reset: Link up : 0x03c25711
<6>[10017.974941] [1: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, end of poweron, pcie state: 3
<7>[10017.975514] [3: kworker/u16:10:32454] s5p-ehci 15510000.usb: GetStatus po
rt:2 status 001803 0 ACK POWER sig=j CSC CONNECT
<7>[10017.975527] [3: kworker/u16:10:32454] hub 1-0:1.0: port 2: status 0501 ch
ange 0001
<7>[10017.975589] [0: kworker/u16:1:32448] usb 1-2: finish reset-resume
<6>[10017.985704] [1: kworker/u16:6:32449] mhi 0000:01:00.0: [debug] pmcsr reg
: 8 dev->current_state : 3
<6>[10017.985886] [1: kworker/u16:6:32449] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[10017.985898] [1: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: Recover
y for the link of RC0
<6>[10017.985909] [1: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: Recover
config space of RC0 and its EP
<6>[10017.985918] [1: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: Recover
RC0
<6>[10017.985946] [1: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: Recover

EP of RC0
<6>[10017.986335] [1: kworker/u16:6:32449] exynos-pcie 10ee0000.pcie0: Refresh
ing the saved config space in PCI framework for RC0 and its EP
<6>[10017.991491] [1: kworker/u16:6:32449] [mhi_turn_on_pcie_link] Exited...
<6>[10017.991504] [1: kworker/u16:6:32449] [mhi_initiate_m0] Setting M0 ...
<6>[10017.991654] [1: kworker/u16:6:32449] [mhi_initiate_m0] Exited...
<4>[10017.994159] [4: system_server: 4318] ufs_get_device_info: UNIQUE NUMBER
= 02157df271b5cb31 , LT: 0x22
<6>[10017.994513] [0: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 5 link 1, ring type 2, index 0 db 0x5fa26520
<6>[10017.994529] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10017.994560] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[10017.994571] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[10017.994582] [1:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[10017.995067] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[10017.995078] [2: kworker/u16:6:32449] [mhi_resume] Wait complete state: 2
<6>[10017.998074] [1: system_server: 4318] exynos-ufs 15570000.ufs: Power mode
change(0): M(1)G(2)L(2)HS-series(2)
<4>[10017.998394] [1: system_server: 4318] hall_resume start
<4>[10017.998404] [1: system_server: 4318] [keys] hall_resume flip_status : 1
(open)
<4>[10017.998416] [1: system_server: 4318] certify_hall_resume start
<4>[10017.998425] [1: system_server: 4318] [keys] certify_hall_resume certify_
status : 0 (detach)
<6>[10017.998443] [1: system_server: 4318] wake disabled for irq 577
<6>[10017.998453] [1: system_server: 4318] wake disabled for irq 580
<6>[10017.998530] [1: system_server: 4318] mst_ldo_device_resume
<6>[10017.998563] [1: system_server: 4318] MST_LDO_DRV]]] resume
<6>[10017.998569] [1: system_server: 4318] MST_LDO_DRV]]] resume success after
smc : 122f122
<6>[10017.998660] [1: system_server: 4318] [SSP] ssp_resume:
<6>[10017.998741] [1:
kworker/1:4:14113] [MAX98505_DEBUG] max98505_resume: e
nter
<6>[10018.004867] [2: system_server: 4318] [SSP] ssp_send_cmd: command 0xd3 0
<6>[10018.004912] [2: system_server: 4318] vfsspi_wakeup_daemon send signal do
ne!
<6>[10018.004943] [2: system_server: 4318] vfsspi_regulator_onoff: ocp on, smc
ret = 0
<6>[10018.007994] [2: system_server: 4318] vfsspi_regulator_onoff: on
<6>[10018.008009] [2: system_server: 4318] vfsspi_pm_resume
<6>[10018.008056] [2: system_server: 4318] wake disabled for irq 4
<6>[10018.008089] [2: system_server: 4318] [VIB] max77843_haptic_resume
<2>[10018.008104] [2: system_server: 4318] Si47xx_resume: device not supported
<6>[10018.008122] [2: system_server: 4318] wake disabled for irq 7
<6>[10018.008317] [2: system_server: 4318] max86900_pm_resume
<6>[10018.010212] [2: system_server: 4318] s2m_rtc_update: RTC_UPDATE_REGISTER
check : 0x00
<6>[10018.010348] [2: system_server: 4318] s2m-rtc s2m-rtc: s2m_rtc_read_time:
2016-11-17 16:22:38(0x10)PM
<6>[10018.012932] [2: system_server: 4318] exynos-pcie 15660000.pcie1: exynos_
pcie_poweron, start of poweron, pcie state: 0
<7>[10018.028984] [0: kworker/u16:1:32448] s5p-ehci 15510000.usb: port 2 reset
complete, port enabled
<7>[10018.029007] [0: kworker/u16:1:32448] s5p-ehci 15510000.usb: GetStatus po
rt:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
<6>[10018.033663] [2: system_server: 4318] exynos-pcie 15660000.pcie1: D state
: 0, 1a8c00

<6>[10018.034964] [2: system_server: 4318] exynos-pcie 15660000.pcie1: exynos_


pcie_reset: Link up : 0x03865611
<6>[10018.035253] [2: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL: 2010
<6>[10018.035269] [2: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL: 42
<6>[10018.035278] [2: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL: 0
<6>[10018.035293] [2: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_RTCT
L: 0
<6>[10018.035308] [2: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_DEVC
TL2: 400
<6>[10018.035322] [2: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_LNKC
TL2: 1
<6>[10018.035332] [2: system_server: 4318] pcieport 0001:00:00.0: PCI_EXP_SLTC
TL2: 0
<6>[10018.035348] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x3c (was 0x1ff, writing 0x101ed)
<6>[10018.035370] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x38 (was 0x0, writing 0x0)
<6>[10018.035386] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x34 (was 0x40, writing 0x40)
<6>[10018.035401] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x30 (was 0x0, writing 0x0)
<6>[10018.035417] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x2c (was 0x0, writing 0x0)
<6>[10018.035433] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x28 (was 0x0, writing 0x0)
<6>[10018.035448] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x24 (was 0x0, writing 0x0)
<6>[10018.035488] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x20 (was 0x1ff01c00, writing 0x1ff01c00)
<6>[10018.035504] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x1c (was 0x0, writing 0x0)
<6>[10018.035520] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x18 (was 0x10100, writing 0x10100)
<6>[10018.035536] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x14 (was 0x0, writing 0x0)
<6>[10018.035551] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x10 (was 0x0, writing 0x0)
<6>[10018.035567] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0xc (was 0x10000, writing 0x10010)
<6>[10018.035588] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x8 (was 0x1, writing 0x6040001)
<6>[10018.035609] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x4 (was 0x100107, writing 0x100147)
<6>[10018.035631] [2: system_server: 4318] pcieport 0001:00:00.0: restoring co
nfig space at offset 0x0 (was 0xa575144d, writing 0xa575144d)
<6>[10018.035813] [2: system_server: 4318] exynos-pcie 15660000.pcie1: exynos_
pcie_poweron, end of poweron, pcie state: 3
<4>[10018.035826] [2: system_server: 4318] dhdpcie_resume_dev: Enter
<6>[10018.036005] [2: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_DEVCTL:
2c10
<6>[10018.036378] [2: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_LNKCTL:
142
<6>[10018.036387] [2: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_SLTCTL:
0
<6>[10018.036396] [2: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_RTCTL:
0
<6>[10018.036769] [2: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_DEVCTL2

: 400
<6>[10018.037144] [2: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_LNKCTL2
: 1
<6>[10018.037153] [2: system_server: 4318] pcieh 0001:01:00.0: PCI_EXP_SLTCTL2
: 0
<6>[10018.037527] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x3c (was 0x100, writing 0x1ed)
<6>[10018.037986] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x38 (was 0x0, writing 0x0)
<6>[10018.038080] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x34 (was 0x48, writing 0x48)
<6>[10018.038174] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x30 (was 0x0, writing 0x0)
<6>[10018.038268] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x2c (was 0x77414e4, writing 0x77414e4)
<6>[10018.038642] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x28 (was 0x0, writing 0x0)
<6>[10018.039035] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x24 (was 0x0, writing 0x0)
<6>[10018.039409] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x20 (was 0x0, writing 0x0)
<6>[10018.039783] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x1c (was 0x0, writing 0x0)
<6>[10018.040158] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x18 (was 0x4, writing 0x1c400004)
<6>[10018.040618] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x18 (writing 0x1c400004)
<6>[10018.040711] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x14 (was 0x0, writing 0x0)
<6>[10018.040805] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x10 (was 0x4, writing 0x1c200004)
<6>[10018.040987] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x10 (writing 0x1c200004)
<6>[10018.041081] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0xc (was 0x0, writing 0x10)
<6>[10018.041259] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x8 (was 0x2800003, writing 0x2800003)
<6>[10018.041353] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x4 (was 0x100000, writing 0x100146)
<6>[10018.041812] [2: system_server: 4318] pcieh 0001:01:00.0: restoring confi
g space at offset 0x0 (was 0x43e914e4, writing 0x43e914e4)
<6>[10018.042281] [0: kworker/u16:1:32448] usb 1-2: reset high-speed USB devic
e number 2 using s5p-ehci
<4>[10018.043156] [2: system_server: 4318] dhdpcie_send_mb_data: H2D_MB_DATA:
0x00000010
<4>[10018.043209] [2: system_server: 4318] dhdpcie_send_mb_data: send H2D_HOST
_D0_INFORM to dongle
<7>[10018.060282] [0: kworker/u16:1:32448] usb 1-2: USB quirks for this device
: 100
<6>[10018.064615] [0: kworker/u16:1:32448] [CHKRA:5]>
<6>[10018.064952] [2: system_server: 4318] PM: resume of devices complete afte
r 154.321 msecs
<6>[10018.065741] I[0:
swapper/0:
0] [NACB:5]<
<6>[10018.065752] I[0:
swapper/0:
0] notification_available_cb: set lpa
handling to false
<6>[10018.065779] I[0:
swapper/0:
0] [CHKRA:5]>
<7>[10018.067863] [0:
kworker/0:0:13589] max77843_fg_write_temp: temperature
to (282, 0x1c33)
<6>[10018.068271] [0:
kworker/0:0:13589] max77843_fg_check_qrtable: QRTABLE2
0_REG(0x1603), QRTABLE30_REG(0x1005)

<7>[10018.069082] [2: system_server: 4318] PM: Finishing wakeup.


<6>[10018.069762] [0:
kworker/0:0:13589] power_supply battery: power_supply_
changed
<6>[10018.069793] [0:
kworker/0:0:13589] Skip monitor work(137, Vnow:4118mV,
Tbat:282)
<7>[10018.069857] [3:
khubd: 742] hub 1-0:1.0: state 7 ports 2 chg 00
04 evt 0000
<6>[10018.069899] [3:
khubd: 742] hub 1-0:1.0: port 2, status 0503, c
hange 0000, 480 Mb/s
<6>[10018.069990] [0:
kworker/0:0:13589] sec_bat_get_property cable type = 1
sleep_mode = 0
<6>[10018.070015] [0:
kworker/0:0:13589] sec_bat_get_property cable type = 1
<6>[10018.070142]
os_runtime_suspend
<3>[10018.072318]
<4>[10018.069095]
<6>[10018.077248]

[0:

kworker/0:0:13589] exynos-dwc3 15400000.usb: dwc3_exyn

[0:
mdm_helper: 3355] esoc REQ enginer waiting on request
[2: system_server: 4318] Restarting tasks ... done.
[2:onic.tuiservice: 659] t-base-tui module: ioctl 0x80047402

<6>[10018.077267] [2:onic.tuiservice: 659] TUI_IO_WAITCMD


<6>[10018.078099] [3:
healthd: 3346] sec_bat_get_property cable type = 1
sleep_mode = 0
<12>[10018.078539] [3:
healthd: 3346] healthd: battery l=98 v=4118 t=28.
2 h=2 st=3 c=0 o=1 ca=-256 ct=0 ps=0 chg= 2016-11-17 16:22:38.683064061 UTC
<12>[10018.078572] [3:
healthd: 3346] healthd: battery l=98 v=4118 t=28.
2 h=2 st=3 c=0 o=1 ca=-256 ct=0 ps=0 chg= 2016-11-17 16:22:38.683064061 UTC hv=0
sec=0 chg=
<14>[10018.078598] [3:
healthd: 3346] healthd-android: healthd_mode_andr
oid_battery_update
<14>[10018.078621] [3:
healthd: 3346] BatteryPropertiesRegistrar: notify
Listeners : start
<14>[10018.078647] [3:
healthd: 3346] IBatteryPropertiesListener : batte
ryPropertiesChanged!
<14>[10018.078647] [3:
healthd: 3346] : BatteryPropertiesRegistrar: noti
fyListeners : done
<6>[10018.080894] [4: system_server: 4318] mdm_hsic_pm_notify_event: unblock r
equest
<6>[10018.080912] [4: system_server: 4318] request_active_lock_set
<6>[10018.080973] [4: system_server: 4318] PM: suspend exit 2016-11-17 16:22:3
8.685554312 UTC
<6>[10018.083801] [4: POSIX timer 16:19287] vfsspi_ioctl VFSSPI_IOCTL_SET_CLK
<6>[10018.083818] [4: POSIX timer 16:19287] vfsspi_set_clk, clk speed: 9600000
<6>[10018.083830] [4: POSIX timer 16:19287] vfsspi_set_clk ENABLE_SPI_CLOCK
<6>[10018.083905] [4: POSIX timer 16:19287] vfsspi_hardReset
<4>[10018.083971] [5:
swapper/5:
0] CPU5: Booted secondary processor
<4>[10018.086365] [6:
swapper/6:
0] CPU6: Booted secondary processor
<4>[10018.087951] [7:
swapper/7:
0] CPU7: Booted secondary processor
<6>[10018.090481] [0: thread_hotplug:19286] frequency info : 1200000, prev_cmd
0, exe_cmd 4
<6>[10018.090504] [0: thread_hotplug:19286] lcd is on : 0, low power mode = 0,
dm_hotplug disable = 0
<6>[10018.090516] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10018.099161] [5: kworker/u16:1:32448] mdm_hsic_rpm_check
<6>[10018.099185] [5: kworker/u16:1:32448] mdm_hsic_rpm_restart
<6>[10018.099593] [7: surfaceflinger: 3350] decon_blank ++ blank_mode : 0
<6>[10018.099606] [7: surfaceflinger: 3350] decon-int UNBLANK mode: 0type (0: D
SI, 1: HDMI, 2:WB)
<4>[10018.100441] [5: surfaceflinger: 3350] decon 13930000.decon_fb: pm_stay_aw
ake
<6>[10018.100451] [5: surfaceflinger: 3350] dsim_enable ++

<6>[10018.101709] [2:
Binder_B: 5860]
eout 0, flag 0, ret 0
<6>[10018.102049] [7:
Binder_B: 5860]
e = 8224, old_enable = 8192
<6>[10018.102062] [7:
Binder_B: 5860]
180000000ns
<6>[10018.102072] [7:
Binder_B: 5860]
, Sensor Type = 0x5, data = 180
<6>[10018.103781] [5:sensorhubservic: 3377]
23, 48, 1, 0
<6>[10018.103795] [5:sensorhubservic: 3377]
, Sensor Type = 0x17, data = 48
<6>[10018.106021] [7: POSIX timer 16:19287]
UP ON:1, retry: 0
<6>[10018.115199] [4: POSIX timer 16:19287]
) is bigger than max_volt(793750)
<6>[10018.117192] [4: POSIX timer 16:19287]
4, active_cpu=0x00000001
<6>[10018.123595] [1:
mc_fastcall: 1747]
<6>[10018.126215] [1:
qmuxd: 3399]
00 00 e3 02 00 71 00 00 00 0b 00 01 08 00
<6>[10018.126852] [3:
Binder_B: 5860]
eout 0, flag=0, ret1
<6>[10018.129941] [4:
mc_log: 3354]
ndId :1
<6>[10018.135744] [0:
qmuxd: 4756]
00 80 e3 02 02 71 00 00 00 07 00 02 04 00
<6>[10018.136539] [1:
Binder_1: 3442]
48, 0
<6>[10018.136556] [1:
Binder_1: 3442]
, Sensor Type = 0x30, data = 0
<6>[10018.136729] [0:
qmuxd: 3399]
00 00 03 01 00 9c 19 50 00 97 00 10 11 00
<6>[10018.143127] [1:
mc_log: 3354]
: 39 : 1, 26228
<6>[10018.143143] [1:
mc_log: 3354]
ternal.c 395 4
<6>[10018.143153] [1:
mc_log: 3354]
c 129 4
<6>[10018.143162] [1:
mc_log: 3354]
c 164 4
<6>[10018.149709] [0:
qmuxd: 4756]
00 80 03 01 02 9c 19 50 00 07 00 02 04 00
<6>[10018.150357] [0:
qmuxd: 3399]
00 00 03 01 00 9d 19 02 00 04 00 12 01 00
<6>[10018.157186] [4:
mc_log: 3354]
e.c 43 4
<6>[10018.157197] [4:
mc_log: 3354]
spi_init
<6>[10018.157203] [4:
mc_log: 3354]
e.c 98 4
<6>[10018.157208] [4:
mc_log: 3354]
e.c 226 4
<6>[10018.157213] [4:
mc_log: 3354]
otocol.c 1107 4
<6>[10018.157218] [4:
mc_log: 3354]
rDevice.c 508 4
<6>[10018.157222] [4:
mc_log: 3354]
otocol.c 843 4
<6>[10018.157226] [4:
mc_log: 3354]

[SSP] batch 5: delay 180000000, tim


[SSP] set_sensors_enable: new_enabl
[SSP] enable_sensor: add 32, New =
[SSP] send_instruction: Inst = 0xa1
[SSP] ssp_sensorhub_write(5): -63,
[SSP] send_instruction: Inst = 0xc1
vfsspi_ioctl VFSSPI_IOCTL_CPU_SPEED
voltage(793750) + volt_offset(37500
MobiCore mcd: <- core_num=0x0000000
MobiCore mcd: CoreSwap ok 1 -> 4
[mhi_uci_dump_log] uci_write: 01 17
[SSP] enable_sensor: delay 180, tim
MobiCore mcd: d01|FINGERPRINT comma
[mhi_uci_dump_log] uci_read: 01 13
[SSP] ssp_sensorhub_write(3): -79,
[SSP] send_instruction: Inst = 0xb1
[mhi_uci_dump_log] uci_write: 01 a3
MobiCore mcd: d01|[FPLOG]vigis_api
MobiCore mcd: d01|SYNAFP: synaFpIn
MobiCore mcd: d01|SYNAFP: vfmInit.
MobiCore mcd: d01|SYNAFP: vfmInit.
[mhi_uci_dump_log] uci_read: 01 13
[mhi_uci_dump_log] uci_write: 01 10
MobiCore mcd: d01|SYNAFP: vfmDevic
MobiCore mcd: b02|[Secure SPI] sec_
MobiCore mcd: d01|SYNAFP: vfmDevic
MobiCore mcd: d01|SYNAFP: vfmDevic
MobiCore mcd: d01|SYNAFP: palSpiPr
MobiCore mcd: d01|SYNAFP: scsSenso
MobiCore mcd: d01|SYNAFP: palSpiPr
MobiCore mcd: d01|SYNAFP: palSpiPr

otocol.c 887 4
<6>[10018.157231] [4:
mc_log:
rDevice.c 602 4
<6>[10018.157235] [4:
mc_log:
rDevice.c 462 4
<6>[10018.157239] [4:
mc_log:
otocol.c 843 4
<6>[10018.157243] [4:
mc_log:
otocol.c 887 4
<6>[10018.157247] [4:
mc_log:
rDevice.c 548 4
<6>[10018.157251] [4:
mc_log:
rDevice.c 471 4
<6>[10018.157255] [4:
mc_log:
otocol.c 843 4
<6>[10018.163276] [3: surfaceflinger:
<6>[10018.163691] [3:
qmuxd:
00 80 03 01 02 9d 19 02 00 07 00 02 04
<6>[10018.164643] [0:
qmuxd:
00 00 03 01 00 9e 19 4d 00 00 00
<6>[10018.173197] [4:
mc_log:
otocol.c 887 4
<6>[10018.173208] [4:
mc_log:
rDevice.c 561 4
<6>[10018.173212] [4:
mc_log:
58 3
<6>[10018.173218] [4:
mc_log:
rDevice.c 468 4
<6>[10018.173222] [4:
mc_log:
otocol.c 843 4
<6>[10018.173227] [4:
mc_log:
otocol.c 887 4
<6>[10018.173231] [4:
mc_log:
rDevice.c 556 4
<6>[10018.173236] [4:
mc_log:
rDevice.c 467 4
<6>[10018.173240] [4:
mc_log:
otocol.c 843 4
<6>[10018.173244] [4:
mc_log:
otocol.c 887 4
<6>[10018.173248] [4:
mc_log:
rDevice.c 554 4
<6>[10018.173253] [4:
mc_log:
rDevice.c 520 4
<6>[10018.173257] [4:
mc_log:
otocol.c 843 4
<6>[10018.175577] [4:
mc_log:
otocol.c 887 4
<6>[10018.175587] [4:
mc_log:
rDevice.c 614 4
<6>[10018.175592] [4:
mc_log:
c 1625 4
<6>[10018.178306] [3:
mc_log:
c 282 3
<6>[10018.178324] [3:
mc_log:
32 4
<6>[10018.178336] [3:
mc_log:
e.c 259 4
<6>[10018.178347] [3:
mc_log:
int::Returning 0

3354] MobiCore mcd: d01|SYNAFP: scsSenso


3354] MobiCore mcd: d01|SYNAFP: scsSenso
3354] MobiCore mcd: d01|SYNAFP: palSpiPr
3354] MobiCore mcd: d01|SYNAFP: palSpiPr
3354] MobiCore mcd: d01|SYNAFP: scsSenso
3354] MobiCore mcd: d01|SYNAFP: scsSenso
3354] MobiCore mcd: d01|SYNAFP: palSpiPr
3350] MDD : s6e3ha2_wqhd_init was called
4756] [mhi_uci_dump_log] uci_read: 01 13
00
3399] [mhi_uci_dump_log] uci_write: 01 0c
3354] MobiCore mcd: d01|SYNAFP: palSpiPr
3354] MobiCore mcd: d01|SYNAFP: scsSenso
3354] MobiCore mcd: d01|SYNAFP: scs.c 26
3354] MobiCore mcd: d01|SYNAFP: scsSenso
3354] MobiCore mcd: d01|SYNAFP: palSpiPr
3354] MobiCore mcd: d01|SYNAFP: palSpiPr
3354] MobiCore mcd: d01|SYNAFP: scsSenso
3354] MobiCore mcd: d01|SYNAFP: scsSenso
3354] MobiCore mcd: d01|SYNAFP: palSpiPr
3354] MobiCore mcd: d01|SYNAFP: palSpiPr
3354] MobiCore mcd: d01|SYNAFP: scsSenso
3354] MobiCore mcd: d01|SYNAFP: scsSenso
3354] MobiCore mcd: d01|SYNAFP: palSpiPr
3354] MobiCore mcd: d01|SYNAFP: palSpiPr
3354] MobiCore mcd: d01|SYNAFP: scsSenso
3354] MobiCore mcd: d01|SYNAFP: scsFwV4.
3354] MobiCore mcd: d01|SYNAFP: scsFwV4.
3354] MobiCore mcd: d01|SYNAFP: scs.c 32
3354] MobiCore mcd: d01|SYNAFP: vfmDevic
3354] MobiCore mcd: d01|Trustlet Fingerpr

<6>[10018.179187] [4:
qmuxd: 4756]
00 80 03 01 02 9e 19 4d 00 98 00 02 04 00
<6>[10018.183959] [3:
mc_log: 3354]
ndId :1
<6>[10018.184627] [0:
qmuxd: 3399]
00 00 03 01 00 9f 19 03 00 38 00 10 01 00
<6>[10018.189379] [0: thread_hotplug:19286]
0, exe_cmd 4
<6>[10018.189396] [0: thread_hotplug:19286]
dm_hotplug disable = 0
<6>[10018.189405] [0: thread_hotplug:19286]
<6>[10018.193219] [2:
mc_log: 3354]
: 39 : 1, 26228
<6>[10018.193236] [2:
mc_log: 3354]
ternal.c 442 4
<6>[10018.193248] [2:
mc_log: 3354]
e.c 360 4
<6>[10018.193259] [2:
mc_log: 3354]
e.c 400 4
<6>[10018.193270] [2:
mc_log: 3354]
e.c 432 4
<6>[10018.193281] [2:
mc_log: 3354]
ternal.c 461 4
<6>[10018.193293] [2:
mc_log: 3354]
int::Returning 0
<6>[10018.196753] [5:
mc_log: 3354]
ndId :5
<6>[10018.196762] [5:
mc_log: 3354]
d
<6>[10018.196768] [5:
mc_log: 3354]
: 226
<6>[10018.197658] [5:
qmuxd: 4756]
00 80 03 01 02 9f 19 03 00 07 00 02 04 00
<6>[10018.198035] [0:
mc_log: 3354]
roller : 693 : 66
<6>[10018.198210] [0:
qmuxd: 3399]
00 00 03 01 00 a0 19 4f 00 00 00
<6>[10018.205574] [4:
mc_log: 3354]
roller : 693 : 66
<6>[10018.205583] [4:
mc_log: 3354]
roller : 693 : 66
<6>[10018.208935] [4:
mc_log: 3354]
roller : 693 : 66
<6>[10018.212008] [2:
qmuxd: 4756]
00 80 03 01 02 a0 19 4f 00 15 00 02 04 00
<6>[10018.213272] [0:
qmuxd: 3399]
00 00 03 01 00 a1 19 70 00 0b 00 01 08 00
<6>[10018.214183] [5:
mc_log: 3354]
roller : 1166 : 0
<6>[10018.214191] [5:
mc_log: 3354]
int::Returning 0
<6>[10018.222417] [3:
mc_log: 3354]
ndId :6
<6>[10018.222434] [3:
mc_log: 3354]
: 253
<6>[10018.222446] [3:
mc_log: 3354]
roller : 1166 : 1
<6>[10018.222458] [3:
mc_log: 3354]
pture.c 144 4
<6>[10018.222469] [3:
mc_log: 3354]

[mhi_uci_dump_log] uci_read: 01 a4
MobiCore mcd: d01|FINGERPRINT comma
[mhi_uci_dump_log] uci_write: 01 44
frequency info : 1000000, prev_cmd
lcd is on : 0, low power mode = 0,
cluster1 cores hotplug out : 0
MobiCore mcd: d01|[FPLOG]vigis_api
MobiCore mcd: d01|SYNAFP: synaFpIn
MobiCore mcd: d01|SYNAFP: vfmDevic
MobiCore mcd: d01|SYNAFP: vfmDevic
MobiCore mcd: d01|SYNAFP: vfmDevic
MobiCore mcd: d01|SYNAFP: synaFpIn
MobiCore mcd: d01|Trustlet Fingerpr
MobiCore mcd: d01|FINGERPRINT comma
MobiCore mcd: d01|decrypt is skippe
MobiCore mcd: d01|[FPLOG]vigis_api
[mhi_uci_dump_log] uci_read: 01 13
MobiCore mcd: d01|[FPLOG]vigis_cont
[mhi_uci_dump_log] uci_write: 01 0c
MobiCore mcd: d01|[FPLOG]vigis_cont
MobiCore mcd: d01|[FPLOG]vigis_cont
MobiCore mcd: d01|[FPLOG]vigis_cont
[mhi_uci_dump_log] uci_read: 01 21
[mhi_uci_dump_log] uci_write: 01 17
MobiCore mcd: d01|[FPLOG]vigis_cont
MobiCore mcd: d01|Trustlet Fingerpr
MobiCore mcd: d01|FINGERPRINT comma
MobiCore mcd: d01|[FPLOG]vigis_api
MobiCore mcd: d01|[FPLOG]vigis_cont
MobiCore mcd: d01|SYNAFP: synaFpCa
MobiCore mcd: d01|SYNAFP: vfmCaptu

re.c 161 4
<6>[10018.222481] [3:
mc_log: 3354]
rDevice.c 466 4
<6>[10018.225621] [4:
mc_log: 3354]
otocol.c 843 4
<6>[10018.226083] [1:
qmuxd: 4756]
00 80 03 01 02 a1 19 70 00 07 00 02 04 00
<6>[10018.227190] [2:
qmuxd: 3399]
00 00 03 01 00 a2 19 ac 00 00 00
<6>[10018.239968] [1:
qmuxd: 4756]
00 80 03 01 02 a2 19 ac 00 3b 00 02 04 00
<6>[10018.240711] [1:
qmuxd: 3399]
00 00 03 01 00 a3 19 4d 00 00 00
<6>[10018.254952] [1:
qmuxd: 4756]
00 80 03 01 02 a3 19 4d 00 98 00 02 04 00
<6>[10018.258994] [4:
mc_log: 3354]
otocol.c 887 4
<6>[10018.259005] [4:
mc_log: 3354]
rDevice.c 549 4
<6>[10018.259011] [4:
mc_log: 3354]
ts.c 981 3
<6>[10018.259017] [4:
mc_log: 3354]
orLineUpdate.c 3706 3
<6>[10018.259022] [4:
mc_log: 3354]
intCmdHelpers.c 3842 4
<6>[10018.259027] [4:
mc_log: 3354]
intCmdHelpers.c 3842 4
<6>[10018.259032] [4:
mc_log: 3354]
intCmdHelpers.c 1472 3
<6>[10018.259037] [4:
mc_log: 3354]
rDevice.c 463 4
<6>[10018.274667] [2:
mc_log: 3354]
otocol.c 843 4
<6>[10018.274682] [4: fingerprintd:19294]
INT
<6>[10018.274691] [2:
mc_log: 3354]
otocol.c 887 4
<6>[10018.274700] [4: fingerprintd:19294]
<6>[10018.274706] [2:
mc_log: 3354]
rDevice.c 557 4
<6>[10018.274718] [2:
mc_log: 3354]
c 270 4
<6>[10018.274726] [4: fingerprintd:19294]
eady active atatus
<6>[10018.274732] [2:
mc_log: 3354]
c 312 4
<6>[10018.274744] [2:
mc_log: 3354]
c 705 4
<6>[10018.274752] [4: fingerprintd:19294]
UP OFF
<6>[10018.274759] [2:
mc_log: 3354]
c 722 4
<6>[10018.274769] [4: fingerprintd:19294]
1, active_cpu=0x00000004
<6>[10018.274775] [2:
mc_log: 3354]
.c 104 4
<6>[10018.274786] [2:
mc_log: 3354]
.c 214 4
<6>[10018.274797] [2:
mc_log: 3354]
c 2420 4

MobiCore mcd: d01|SYNAFP: scsSenso


MobiCore mcd: d01|SYNAFP: palSpiPr
[mhi_uci_dump_log] uci_read: 01 13
[mhi_uci_dump_log] uci_write: 01 0c
[mhi_uci_dump_log] uci_read: 01 47
[mhi_uci_dump_log] uci_write: 01 0c
[mhi_uci_dump_log] uci_read: 01 a4
MobiCore mcd: d01|SYNAFP: palSpiPr
MobiCore mcd: d01|SYNAFP: scsSenso
MobiCore mcd: d01|SYNAFP: calResul
MobiCore mcd: d01|SYNAFP: scsWinds
MobiCore mcd: d01|SYNAFP: scsGetPr
MobiCore mcd: d01|SYNAFP: scsGetPr
MobiCore mcd: d01|SYNAFP: scsGetPr
MobiCore mcd: d01|SYNAFP: scsSenso
MobiCore mcd: d01|SYNAFP: palSpiPr
vfsspi_ioctl VFSSPI_IOCTL_SET_DRDY_
MobiCore mcd: d01|SYNAFP: palSpiPr
vfsspi_enableIrq
MobiCore mcd: d01|SYNAFP: scsSenso
MobiCore mcd: d01|SYNAFP: irDliRT.
vfsspi_set_drdy_int drdy pin is alr
MobiCore mcd: d01|SYNAFP: irDliRT.
MobiCore mcd: d01|SYNAFP: irDliRT.
vfsspi_ioctl VFSSPI_IOCTL_CPU_SPEED
MobiCore mcd: d01|SYNAFP: irDliRT.
MobiCore mcd: <- core_num=0x0000000
MobiCore mcd: d01|SYNAFP: vcsImage
MobiCore mcd: d01|SYNAFP: vcsImage
MobiCore mcd: d01|SYNAFP: irDliRT.

<6>[10018.274808] [2:
mc_log: 3354]
c 599 4
<6>[10018.274819] [2:
mc_log: 3354]
c 794 4
<6>[10018.274830] [2:
mc_log: 3354]
c 549 4
<6>[10018.274841] [2:
mc_log: 3354]
c 665 4
<6>[10018.274852] [2:
mc_log: 3354]
electFrame.c 938 4
<6>[10018.274863] [2:
mc_log: 3354]
c 2685 4
<6>[10018.274874] [2:
mc_log: 3354]
.c 85 4
<6>[10018.274885] [2:
mc_log: 3354]
.c 1845 4
<6>[10018.274896] [2:
mc_log: 3354]
.c 1908 4
<6>[10018.274907] [2:
mc_log: 3354]
.c 905 4
<6>[10018.274918] [2:
mc_log: 3354]
c 1122 4
<6>[10018.274929] [2:
mc_log: 3354]
re.c 108 4
<6>[10018.274940] [2:
mc_log: 3354]
re.c 418 4
<6>[10018.274951] [2:
mc_log: 3354]
int::Returning 0
<6>[10018.275014] [4:
mc_fastcall: 1747]
<6>[10018.275983] [4: fingerprintd:19294]
INT
<6>[10018.275990] [4: fingerprintd:19294]
<6>[10018.276013] [4: fingerprintd:19294]
UP ON:1, retry: 0
<6>[10018.276018] [4: fingerprintd:19294]
ling time is too short. wait 10ms
<6>[10018.284918] [2:
Binder_3:30892]
13, -47, 0
<6>[10018.289229] [0: thread_hotplug:19286]
0, exe_cmd 4
<6>[10018.289245] [0: thread_hotplug:19286]
dm_hotplug disable = 0
<6>[10018.289262] [0: thread_hotplug:19286]
<6>[10018.289767] [6: fingerprintd:19294]
4, active_cpu=0x00000001
<6>[10018.290118] [1:
mc_fastcall: 1747]
<6>[10018.291511] [6:
Binder_3:30892]
<6>[10018.292999] [2:
mc_log: 3354]
ndId :6
<6>[10018.293017] [2:
mc_log: 3354]
: 253
<6>[10018.293029] [2:
mc_log: 3354]
roller : 1166 : 1
<6>[10018.293040] [2:
mc_log: 3354]
pture.c 182 4
<6>[10018.293051] [2:
mc_log: 3354]
re.c 1158 4
<6>[10018.293062] [2:
mc_log: 3354]
re.c 1201 4
<6>[10018.293073] [2:
mc_log: 3354]

MobiCore mcd: d01|SYNAFP: dliUtil.


MobiCore mcd: d01|SYNAFP: dliUtil.
MobiCore mcd: d01|SYNAFP: irDliRT.
MobiCore mcd: d01|SYNAFP: irDliRT.
MobiCore mcd: d01|SYNAFP: vcsIR2DS
MobiCore mcd: d01|SYNAFP: irDliRT.
MobiCore mcd: d01|SYNAFP: vcsIRApi
MobiCore mcd: d01|SYNAFP: vcsIRApi
MobiCore mcd: d01|SYNAFP: vcsIRApi
MobiCore mcd: d01|SYNAFP: vcsIRApi
MobiCore mcd: d01|SYNAFP: irDliRT.
MobiCore mcd: d01|SYNAFP: vfmCaptu
MobiCore mcd: d01|SYNAFP: vfmCaptu
MobiCore mcd: d01|Trustlet Fingerpr
MobiCore mcd: CoreSwap ok 4 -> 1
vfsspi_ioctl VFSSPI_IOCTL_SET_DRDY_
vfsspi_disableIrq
vfsspi_ioctl VFSSPI_IOCTL_CPU_SPEED
secos_booster_request_pm_qos: recal
[SSP] ssp_sensorhub_write(4): -76,
frequency info : 1000000, prev_cmd
lcd is on : 0, low power mode = 0,
cluster1 cores hotplug out : 0
MobiCore mcd: <- core_num=0x0000000
MobiCore mcd: CoreSwap ok 1 -> 4
[SSP] ssp_send_cmd: command 0xd1 0
MobiCore mcd: d01|FINGERPRINT comma
MobiCore mcd: d01|[FPLOG]vigis_api
MobiCore mcd: d01|[FPLOG]vigis_cont
MobiCore mcd: d01|SYNAFP: synaFpCa
MobiCore mcd: d01|SYNAFP: vfmCaptu
MobiCore mcd: d01|SYNAFP: vfmCaptu
MobiCore mcd: d01|Trustlet Fingerpr

int::Returning 0
<6>[10018.293166] [0: fingerprintd:19294] vfsspi_ioctl VFSSPI_IOCTL_SET_DRDY_
INT
<6>[10018.293179] [0: fingerprintd:19294] vfsspi_enableIrq
<6>[10018.293228] [0: fingerprintd:19294] vfsspi_ioctl VFSSPI_IOCTL_CPU_SPEED
UP OFF
<6>[10018.293243] [0: fingerprintd:19294] MobiCore mcd: <- core_num=0x0000000
1, active_cpu=0x00000004
<6>[10018.293284] [4:
mc_fastcall: 1747] MobiCore mcd: CoreSwap ok 4 -> 1
<6>[10018.293333] [0: fingerprintd:19294] secos_booster_request_pm_qos: recal
ling time is too short. wait 7ms
<6>[10018.295868] [4: surfaceflinger: 3350] dsim_panel_set_brightness : platfor
m : 0, : mapping : 2, real : 2, index : 0, interpolation : 0
<6>[10018.295953] [4: surfaceflinger: 3350] dsim_panel_get_elvssoffset 0
<6>[10018.295997] [4: surfaceflinger: 3350] vint: 18
<6>[10018.296193] [6: surfaceflinger: 3350] acl : 2, opr: 12
<6>[10018.296200] [6: surfaceflinger: 3350] acl: 2(50), auto_brightness: 0
<6>[10018.296223] [6: surfaceflinger: 3350] dsim_panel_set_tset temperature: 25
, tset: 25
<6>[10018.296242] [6: surfaceflinger: 3350] hbm: 0, auto_brightness: 0
<6>[10018.296274] [6: surfaceflinger: 3350] MDD : s6e3ha2_wqhd_displayon was ca
lled
<6>[10018.296293] [6: surfaceflinger: 3350] pclk_dsim0: 55 Mhz
<6>[10018.296297] [6: surfaceflinger: 3350] mipidphy0_rx: 20 Mhz
<6>[10018.296302] [6: surfaceflinger: 3350] mipidphy0_bit: 187 Mhz
<6>[10018.296306] [6: surfaceflinger: 3350] rgb_vclk0: 300 Mhz
<6>[10018.296310] [6: surfaceflinger: 3350] pclk_ahb2apb_disp0p: 55 Mhz
<6>[10018.296313] [6: surfaceflinger: 3350] dsim_enable -<6>[10018.296389] [6: surfaceflinger: 3350] decon_blank -- blank_mode : 0
<6>[10018.296442] [6: surfaceflinger: 3350] dsim_panel_set_brightness : platfor
m : 0, : mapping : 2, real : 2, index : 0, interpolation : 0
<6>[10018.297111] [1: kworker/u16:9:32452] mailbox : APM SRAM stable
<6>[10018.297130] [1: kworker/u16:9:32452] mailbox : fw_checksum [1326], DRAM
checksum [1326], sram checksum [1326]
<6>[10018.297169] [1: kworker/u16:9:32452] mailbox: hsi2c -> apm mode
<6>[10018.314259] [1: irq/15-SSP_Int: 1775] [SSP] [M] #>
<6>[10018.314259] [1: irq/15-SSP_Int: 1775] s
<6>[10018.314259] [1: irq/15-SSP_Int: 1775] S
<6>[10018.314259] [1: irq/15-SSP_Int: 1775] AL48 0 1 8737 1441433360030236672
<6>[10018.314259] [1: irq/15-SSP_Int: 1775] #>r=33 g=26 b=28 c=79 atime=245 aga
in=3 lux=49
<6>[10018.314912] [5:
Binder_10: 7518] [SSP] set_sensors_enable: new_enabl
e = 8192, old_enable = 8224
<6>[10018.314921] [5:
Binder_10: 7518] [SSP] ssp_remove_sensor: remove sen
sor = 32, current state = 8192
<6>[10018.314928] [5:
Binder_10: 7518] [SSP] send_instruction: Inst = 0xa2
, Sensor Type = 0x5, data = 180
<6>[10018.332687] [6: surfaceflinger: 3350] dsim_panel_get_elvssoffset 0
<6>[10018.332738] [6: surfaceflinger: 3350] vint: 18
<6>[10018.332825] [6: surfaceflinger: 3350] acl : 2, opr: 12
<6>[10018.332831] [6: surfaceflinger: 3350] acl: 2(50), auto_brightness: 0
<6>[10018.332857] [6: surfaceflinger: 3350] dsim_panel_set_tset temperature: 25
, tset: 25
<6>[10018.332882] [6: surfaceflinger: 3350] hbm: 0, auto_brightness: 0
<6>[10018.332931] [6: surfaceflinger: 3350] mdnie mdnie: fb_notifier_callback:
0
<6>[10018.333050] [6: surfaceflinger: 3350] mdnie mdnie: AUTO_UI
<6>[10018.333059] [6: surfaceflinger: 3350] LCD is on
<6>[10018.334402] [5:PmsDisplayThrea:19298] fts_touch 7-0049: fts_start_device
<6>[10018.334545] [5:PmsDisplayThrea:19297] sec_touchkey_driver 3-0020: touchke

y_power_on: on
<6>[10018.334602] [5:PmsDisplayThrea:19298] fts_touch 7-0049: fts_power_ctrl: o
n
<6>[10018.343466] [4:
Binder_2:30887] [SSP] ssp_sensorhub_write(4): -79,
7, 0, 0
<6>[10018.343479] [4:
Binder_2:30887] [SSP] send_instruction: Inst = 0xb1
, Sensor Type = 0x7, data = 0
<6>[10018.369208] [5:PmsDisplayThrea:19298] fts_touch 7-0049: fts_wait_for_read
y: 10, 03, 01, 19, 21, 1E, 38, 00
<6>[10018.369630] [5:PmsDisplayThrea:19298] fts_touch 7-0049: FTS B60007 = 39
6C 03 21 19 00
<6>[10018.369640] [5:PmsDisplayThrea:19298] fts_touch 7-0049: FTS Chip ID : 39
6C
<6>[10018.369648] [5:PmsDisplayThrea:19298] fts_touch 7-0049: FTS SystemReset
<6>[10018.374722] I[1: irq/15-SSP_Int: 1775] [SSP] ssp_sensorhub_list(11): 1, 1,
48, 0, 0, 0, 60, 0, 0, 0, 52
<6>[10018.374758] [1: irq/15-SSP_Int: 1775] [SSP] [M] save bak odr 5, 1, -1, 20
, 0
<6>[10018.374758] [1: irq/15-SSP_Int: 1775] sa
<6>[10018.374758] [1: irq/15-SSP_Int: 1775] SH_LM_Template_Process_AutoBrightne
ss_Cellphone (110) candela(60), lux(52)
<6>[10018.374779] [5:ssp_sensorhub_t: 1783] wakeup source sensorhub activation
skipped
<6>[10018.374859] I[6:SensorHubServic: 3439] [SSP] ssp_sensorhub_read(11): 1, 1,
48, 0, 0, 0, 60, 0, 0, 0, 52
<6>[10018.378510] [6:RegisterInSeper: 5206] backlight panel: auto_brightness_st
ore: 0, 2
<6>[10018.378524] [6:RegisterInSeper: 5206] dsim_panel_set_brightness : platfor
m : 0, : mapping : 2, real : 2, index : 0, interpolation : 0
<6>[10018.378612] [6:RegisterInSeper: 5206] dsim_panel_get_elvssoffset 0
<6>[10018.378652] [6:RegisterInSeper: 5206] vint: 18
<6>[10018.378713] [6:RegisterInSeper: 5206] acl : 2, opr: 12
<6>[10018.378721] [6:RegisterInSeper: 5206] acl: 2(50), auto_brightness: 2
<6>[10018.378744] [6:RegisterInSeper: 5206] dsim_panel_set_tset temperature: 25
, tset: 25
<6>[10018.378763] [6:RegisterInSeper: 5206] hbm: 0, auto_brightness: 2
<6>[10018.379143] [5:PowerManagerSer: 4311] backlight panel: auto_brightness_st
ore: 2, 0
<6>[10018.379156] [5:PowerManagerSer: 4311] dsim_panel_set_brightness : platfor
m : 0, : mapping : 2, real : 2, index : 0, interpolation : 0
<6>[10018.379271] [5:PowerManagerSer: 4311] dsim_panel_get_elvssoffset 0
<6>[10018.379285] [6:RegisterInSeper: 5206] mdnie mdnie: auto_brightness_store:
value=2
<6>[10018.379406] [3:PowerManagerSer: 4311] vint: 18
<6>[10018.379504] [5:PowerManagerSer: 4311] acl : 2, opr: 12
<6>[10018.379512] [5:PowerManagerSer: 4311] acl: 2(50), auto_brightness: 0
<6>[10018.379535] [5:PowerManagerSer: 4311] dsim_panel_set_tset temperature: 25
, tset: 25
<6>[10018.379556] [5:PowerManagerSer: 4311] hbm: 0, auto_brightness: 0
<6>[10018.379716] [5:PowerManagerSer: 4311] mdnie mdnie: auto_brightness_store:
value=0
<6>[10018.380552] [0:PhotonicModulat: 5207] dsim_panel_set_brightness : platfor
m : 25, : mapping : 27, real : 27, index : 22, interpolation : 0
<6>[10018.380651] [0:PhotonicModulat: 5207] dsim_panel_get_elvssoffset 0
<6>[10018.380698] [0:PhotonicModulat: 5207] vint: 21
<6>[10018.380762] [0:PhotonicModulat: 5207] acl : 2, opr: 12
<6>[10018.380778] [0:PhotonicModulat: 5207] acl: 2(50), auto_brightness: 0
<6>[10018.380809] [0:PhotonicModulat: 5207] dsim_panel_set_tset temperature: 25
, tset: 25
<6>[10018.380837] [0:PhotonicModulat: 5207] hbm: 0, auto_brightness: 0

<6>[10018.381282] [1:sensorhubservic: 3377] [SSP] ssp_sensorhub_write(4): -78,


48, 0, 0
<6>[10018.381307] [1:sensorhubservic: 3377] [SSP] send_instruction: Inst = 0xb2
, Sensor Type = 0x30, data = 0
<6>[10018.392213] [0: thread_hotplug:19286] frequency info : 1000000, prev_cmd
0, exe_cmd 4
<6>[10018.392239] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10018.392254] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10018.403851] [4:PmsDisplayThrea:19298] fts_touch 7-0049: fts_wait_for_read
y: 10, 03, 01, 19, 21, 1E, 38, 00
<6>[10018.405636] [4:PmsDisplayThrea:19298] fts_touch 7-0049: FTS Command (91)
, ret = 1
<6>[10018.459003] [4:PmsDisplayThrea:19298] fts_touch 7-0049: FTS Command (93)
, ret = 1
<6>[10018.463798] [5: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10018.463826] [4:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[10018.463836] [4:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[10018.463847] [4:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[10018.464034] [4:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<7>[10018.489748] [5:PmsDisplayThrea:19297] touchkey:ic mode is n1
<6>[10018.515700] [4:PmsDisplayThrea:19298] fts_touch 7-0049: FTS Command (A1)
, ret = 1
<6>[10018.515714] [4:PmsDisplayThrea:19298] fts_touch 7-0049: FTS INT Enable
<3>[10018.516011] [4:PmsDisplayThrea:19298] fts_touch 7-0049: FTS cmd after wak
eup : h0
<6>[10018.516266] [6:PmsDisplayThrea: 4338] LCD on
<6>[10018.516280] [6:PmsDisplayThrea: 4338] is_lcd_on is TRUE
<6>[10018.541244] [5:
mc_log: 3354] MobiCore mcd: e01|ccccccccccccccccc
cccccccccTL_TZ_CCM: tciBufferLen = 38912 = 0x9800
<6>[10018.541265] [5:
mc_log: 3354] MobiCore mcd: e01|Trustlet TL_TZ_CC
M: Starting
<6>[10018.541278] [5:
mc_log: 3354] MobiCore mcd: e01|TL_TZ_CCM: tciBuf
ferLen = 38912 = 0x9800
<6>[10018.541800] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [FTS] Received Mu
tual Calib Frame Check Event
<6>[10018.541853] [5:
mc_log: 3354] MobiCore mcd: e01|TL_TZ_CCM: sendms
g envelope length = 19456 = 0x4c00
<6>[10018.545726] [6:
mc_log: 3354] MobiCore mcd: e01|TL_TZ_CCM: sendms
g = 00092c80, respmsg = 0009785c
<6>[10018.545740] [6:
mc_log: 3354] MobiCore mcd: e01|Trustlet TL_TZ_CC
M: Got a message!
<6>[10018.545751] [6:
mc_log: 3354] MobiCore mcd: e01|TZ_CCM: we got a
command
<6>[10018.545761] [6:
mc_log: 3354] MobiCore mcd: e01|TZ_CCM: process_c
md: CMD_TZ_CCM_C_Initialize:
<6>[10018.545772] [6:
mc_log: 3354] MobiCore mcd: e01|TIMA trustlet: Re
ading knox license status
<6>[10018.545782] [6:
mc_log: 3354] MobiCore mcd: e01|TIMA trustlet: g
et_sec_TIMA_address tima_sec_mem_addr : FE800000
<6>[10018.545792] [6:
mc_log: 3354] MobiCore mcd: 501|drTima: processin
g TIMA_DRIVER_PHYS_MEM_ACCESS_COPY
<6>[10018.545802] [6:
mc_log: 3354] MobiCore mcd: 501|drTima: data_len
= 4 = 0x4
<6>[10018.545811] [6:
mc_log: 3354] MobiCore mcd: 501|drTima: PHYS_READ

<6>[10018.547237] [6:
mc_log: 3354] MobiCore mcd: e01|read license stat
us is: 0
<6>[10018.547253] [6:
mc_log: 3354] MobiCore mcd: e01|low security mode
<6>[10018.549829] [6:
mc_log: 3354] MobiCore mcd: 501|drTima: processin
g TIMA_DRIVER_PHYS_MEM_ACCESS_COPY
<6>[10018.550122] [6:
mc_log: 3354] MobiCore mcd: 501|drTima: data_len
= 32 = 0x20
<6>[10018.550511] [6:
mc_log: 3354] MobiCore mcd: 501|drTima: PHYS_READ
<6>[10018.551397] [1:
mc_log: 3354] MobiCore mcd: e01|TIMA trustlet: wa
rranty violation detected 18
<6>[10018.551753] [1:
mc_log: 3354] MobiCore mcd: e01|TZ_COMMON: Initia
lize failed - tamper fuse set
<6>[10018.552372] [4:
mc_log: 3354] MobiCore mcd: e01|TL_TZ_CCM: TL CCM
general initialization failure
<6>[10018.553492] [4:
mc_log: 3354] MobiCore mcd: e01|Trustlet TL_TZ_CC
M: sendmsg->header.id = 0x00000002
<6>[10018.553513] [4:
mc_log: 3354] MobiCore mcd: e01|Trustlet TL_TZ_CC
M: respmsg->header.id = 0x80000002
<6>[10018.553527] [4:
mc_log: 3354] MobiCore mcd: e01|Trustlet TL_TZ_CC
M: respmsg->header.status = 0x00000000
<6>[10018.553540] [4:
mc_log: 3354] MobiCore mcd: e01|Trustlet TL_TZ_CC
M: Returning = 0x00000000
<6>[10018.557077] [6:
mc_log: 3354] MobiCore mcd: 104| SMGNT send MSG_C
LOSE_TRUSTLET for thread e01 to IPCH
<6>[10018.558337] [6:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 202 (UUID=02010000-0000-0000-0000-000000005000) (server 0/8 status i
s 00000001)
<6>[10018.562288] [5:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 302 (UUID=ffffffff-0000-0000-0000-000000000002) (server 1/8 status i
s 00000001)
<6>[10018.562316] [5:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 402 (UUID=ffffffff-0000-0000-0000-000000000001) (server 2/8 status i
s 00000001)
<6>[10018.563969] [5:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 501 (UUID=ffffffff-d000-0000-0000-00000000000a) (server 3/8 status i
s 00000001)
<6>[10018.568029] [6:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 602 (UUID=ffffffff-d000-0000-0000-000000000016) (server 4/8 status i
s 00000001)
<6>[10018.568054] [6:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 702 (UUID=07050500-0000-0000-0000-000000000000) (server 5/8 status i
s 00000001)
<6>[10018.572484] [1:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to b02 (UUID=ffffffff-d000-0000-0000-00000000000e) (server 6/8 status i
s 00000001)
<6>[10018.572542] [1:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 902 (UUID=ffffffff-d000-0000-0000-000000000014) (server 7/8 status i
s 00000001)
<6>[10018.572560] [1:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop do
ne
<7>[10018.576923] [0:
kworker/0:0:13589] usb 1-2: usb auto-suspend, wakeup 1
<6>[10018.577689] [1:
kworker/1:4:14113] MIF(635000): unset TMU_COLD: 675000
=> (set_volt: 637500, get_volt: 631250)
<6>[10018.580008] [1:
kworker/1:4:14113] DISP(167000): unset TMU_COLD: (set_
volt: 650000, get_volt: 650000)
<6>[10018.582299] [1:
kworker/1:4:14113] INT(100000): unset TMU_COLD: 687500
=> 650000
<6>[10018.582320] [1:
kworker/1:4:14113] tmu temperature state 1 to 0, cur_t
emp : 38
<6>[10018.582337] [1:
kworker/1:4:14113] gpu temperature state 1 to 0

<6>[10018.586995] [2:
mc_log: 3354] MobiCore mcd: 501|drTima: MSG_CLOSE
_TRUSTLET call 0x40001
<6>[10018.588946] [6:
mc_log: 3354] MobiCore mcd: b02|Driver SPI receiv
es MSG_CLOSE_TRUSTLET[0x00040001, 0x0001000e]
<7>[10018.588994] [0:
kworker/0:0:13589] hub 1-0:1.0: hub_suspend
<7>[10018.589047] [0:
kworker/0:0:13589] usb usb1: bus auto-suspend, wakeup
1
<7>[10018.589071] [0:
kworker/0:0:13589] s5p-ehci 15510000.usb: suspend root
hub
<3>[10018.590534] [0:
kworker/0:3:22917] s5p-ehci 15510000.usb: s5p_ehci_run
time_suspend
<6>[10018.590587] [2:
mc_log: 3354] MobiCore mcd: 104| SMGNT smgntClose
Session done
<3>[10018.601336] [6:
tlc_server: 5103] MobiCore mcd: closed by PID(5103),
name(tlc_server)
<7>[10018.602287] [0:
kworker/0:3:22917] samsung-usb2phy 15530000.usb2phy: s
amsung_usb2phy_runtime_suspend
<6>[10018.602344] [0:
kworker/0:3:22917] request_active_lock_release
<6>[10018.602366] [0:
kworker/0:3:22917] s5p_ehci_runtime_suspend: usage=0,
child=0
<6>[10018.634329] I[1: irq/15-SSP_Int: 1775] [SSP] ssp_sensorhub_list(4): 1, 1,
7, 0
<6>[10018.634370] [1: irq/15-SSP_Int: 1775] [SSP] [M] AB++ stop
<6>[10018.634370] [1: irq/15-SSP_Int: 1775] #>LIGC
<6>[10018.634370] [1: irq/15-SSP_Int: 1775] save bak odr 9, 1, -1, 20, 0
<6>[10018.634370] [1: irq/15-SSP_Int: 1775] save bak odr 9, 0, -1, 20, 0
<6>[10018.634370] [1: irq/15-SSP_Int: 1775] RM 9 0 1 0 60
<6>[10018.634370] [1: irq/15-SSP_Int: 1775] SMR 48 513 9
<6>[10018.634370] [1: irq/15-SSP_Int: 1775] save bak odr 0, 1, 20, 20, 0
<6>[10018.634370] [1: irq/15-SSP_Int: 1775] save bak odr 0, 0, 20, 20, 0
<6>[10018.634370] [1: irq/15-SSP_Int: 1775] RM 0 4 1 4 60
<6>[10018.634370] [1: irq/15-SSP_Int: 1775] SMR 48 1 0
<6>[10018.634370] [1: irq/15-SSP_Int: 1775] RL48 0 0 8193 1441151885053526144
<6>[10018.634370] [1: irq/15-SSP_Int: 1775] SSP Rotation Mode 0
<6>[10018.634446] [5:ssp_sensorhub_t: 1783] wakeup source sensorhub activation
skipped
<6>[10018.634458] I[6:SensorHubServic: 3439] [SSP] ssp_sensorhub_read(4): 1, 1,
7, 0
<6>[10018.649651] [5: wpa_supplicant: 5196] CFG80211-TRACE) __wl_cfg80211_scan
: START SCAN
<6>[10018.653843] [6: mSvcLEDThread: 4330] leds-max77843-rgb: store_max77843_r
gb_pattern
<6>[10018.653871] [6: mSvcLEDThread: 4330] leds-max77843-rgb: max77843_rgb_set
_state
<6>[10018.653886] [6: mSvcLEDThread: 4330] leds-max77843-rgb: max77843_rgb_num
ber, 1
<6>[10018.653897] [6: mSvcLEDThread: 4330] leds-max77843-rgb: max77843_rgb_num
ber, 1
<6>[10018.654634] [5: mSvcLEDThread: 4330] leds-max77843-rgb: max77843_rgb_set
_state, led_num = 1, brightness = 0
<6>[10018.654988] [5: mSvcLEDThread: 4330] leds-max77843-rgb: max77843_rgb_set
_state
<6>[10018.655004] [5: mSvcLEDThread: 4330] leds-max77843-rgb: max77843_rgb_num
ber, 2
<6>[10018.655016] [5: mSvcLEDThread: 4330] leds-max77843-rgb: max77843_rgb_num
ber, 2
<6>[10018.655364] [5: mSvcLEDThread: 4330] leds-max77843-rgb: max77843_rgb_set
_state, led_num = 2, brightness = 0
<6>[10018.655893] [3: mSvcLEDThread: 4330] leds-max77843-rgb: max77843_rgb_set
_state

<6>[10018.655920] [3: mSvcLEDThread: 4330]


ber, 3
<6>[10018.655935] [3: mSvcLEDThread: 4330]
ber, 3
<6>[10018.656391] [5: mSvcLEDThread: 4330]
_state, led_num = 3, brightness = 0
<6>[10018.656718] [5: mSvcLEDThread: 4330]
p
<6>[10018.683358] [4: wpa_supplicant: 5196]
<6>[10018.683380] [4: wpa_supplicant: 5196]
<4>[10018.683394] [4: wpa_supplicant: 5196]
nd setting
<6>[10018.683411] [4: wpa_supplicant: 5196]
<4>[10018.683424] [4: wpa_supplicant: 5196]
<4>[10018.684284] [4: wpa_supplicant: 5196]
lue = 0
<6>[10018.690091] [7: wpa_supplicant: 5196]
<6>[10018.719236] [4:
Binder_1: 3442]
26, 0, 0, 0, 0, 0, 0, 0, 0, 16, 22, 39
<6>[10018.719262] [4:
Binder_1: 3442]
, Sensor Type = 0x1a, data = 0
<6>[10018.747617] [6:
Binder_3:30892]
26, 1, 0
<6>[10018.747644] [6:
Binder_3:30892]
, Sensor Type = 0x1a, data = 1
<6>[10018.773482] I[1: irq/15-SSP_Int: 1775]
26, 1, 3, -125, -88, -53, 0, 2
<6>[10018.773523] [1: irq/15-SSP_Int: 1775]
<6>[10018.773523] [1: irq/15-SSP_Int: 1775]
<6>[10018.773523] [1: irq/15-SSP_Int: 1775]
<6>[10018.773523] [1: irq/15-SSP_Int: 1775]
<6>[10018.773573] [5:ssp_sensorhub_t: 1783]
skipped
<6>[10018.773604] I[6:SensorHubServic: 3439]
26, 1, 3, -125, -88, -53, 0, 2
<6>[10018.793097] I[1: irq/15-SSP_Int: 1775]
26, 1, 3, -125, -88, -53, 0, 2
<6>[10018.793173] [4:ssp_sensorhub_t: 1783]
skipped
<6>[10018.793226] I[6:SensorHubServic: 3439]
26, 1, 3, -125, -88, -53, 0, 2
<6>[10018.878106] I[0:
swapper/0:
0]
<6>[10018.878322] [2: fingerprintd:19294]
INT
<6>[10018.878345] [2: fingerprintd:19294]
<3>[10018.878360] [2: fingerprintd:19294]
disabled
<6>[10018.878407] [2: fingerprintd:19294]
UP ON:1, retry: 0
<6>[10018.883706] [4: fingerprintd:19294]
4, active_cpu=0x00000001
<6>[10018.883927] [1:
mc_fastcall: 1747]
<6>[10018.887282] [2:
mc_log: 3354]
ndId :6
<6>[10018.887309] [2:
mc_log: 3354]
: 253
<6>[10018.887327] [2:
mc_log: 3354]
roller : 1166 : 1
<6>[10018.887345] [2:
mc_log: 3354]
pture.c 182 4

leds-max77843-rgb: max77843_rgb_num
leds-max77843-rgb: max77843_rgb_num
leds-max77843-rgb: max77843_rgb_set
leds-max77843-rgb: max77843_rgb_ram
[dhd] dhd_suspend_resume_helper
[dhd] dhd_set_suspend
dhd_set_suspend: Remove extra suspe
[dhd] resume power_mode: 2
dhd_prot_ioctl: SET PM to 2
dhd_enable_packet_filter: enter, va
[dhd] resume bcn_li_dtim: 0
[SSP] ssp_sensorhub_write(13): -79,
[SSP] send_instruction: Inst = 0xb1
[SSP] ssp_sensorhub_write(4): -72,
[SSP] send_instruction: Inst = 0xb8
[SSP] ssp_sensorhub_list(10): 1, 1,
[SSP] [M] AT-SetTS1 58
AT-AL 1 0 0 0,AT 0 0 1000 0000
AL26 0 1 8193 1441151885120635016
AT RI Nor -26 1 1
wakeup source sensorhub activation
[SSP] ssp_sensorhub_read(10): 1, 1,
[SSP] ssp_sensorhub_list(10): 1, 1,
wakeup source sensorhub activation
[SSP] ssp_sensorhub_read(10): 1, 1,
vfsspi_irq disableIrq
vfsspi_ioctl VFSSPI_IOCTL_SET_DRDY_
vfsspi_disableIrq
vfsspi_disableIrq DRDY irq already
vfsspi_ioctl VFSSPI_IOCTL_CPU_SPEED
MobiCore mcd: <- core_num=0x0000000
MobiCore mcd: CoreSwap ok 1 -> 4
MobiCore mcd: d01|FINGERPRINT comma
MobiCore mcd: d01|[FPLOG]vigis_api
MobiCore mcd: d01|[FPLOG]vigis_cont
MobiCore mcd: d01|SYNAFP: synaFpCa

<6>[10018.887362] [2:
mc_log: 3354]
re.c 1158 4
<6>[10018.887380] [2:
mc_log: 3354]
re.c 1201 4
<6>[10018.887397] [2:
mc_log: 3354]
int::Returning 0
<6>[10018.890621] [4:
mc_log: 3354]
ndId :6
<6>[10018.890634] [4:
mc_log: 3354]
: 253
<6>[10018.890643] [4:
mc_log: 3354]
roller : 1166 : 1
<6>[10018.890651] [4:
mc_log: 3354]
pture.c 265 4
<6>[10018.890658] [4:
mc_log: 3354]
re.c 442 4
<6>[10018.890665] [4:
mc_log: 3354]
rDevice.c 517 4
<6>[10018.894066] [1:
mc_log: 3354]
otocol.c 843 4
<6>[10018.895527] [0: thread_hotplug:19286]
0, exe_cmd 4
<6>[10018.895551] [0: thread_hotplug:19286]
dm_hotplug disable = 0
<6>[10018.895566] [0: thread_hotplug:19286]
<6>[10018.903339] [4:
mc_log: 3354]
otocol.c 887 4
<6>[10018.903351] [4:
mc_log: 3354]
rDevice.c 611 4
<6>[10018.903359] [4:
mc_log: 3354]
c 1625 4
<6>[10018.903368] [4:
mc_log: 3354]
re.c 811 4
<6>[10018.903375] [4:
mc_log: 3354]
pture.c 364 4
<6>[10018.903382] [4:
mc_log: 3354]
int::Returning 0
<6>[10018.903481] [7: fingerprintd:19294]
INT
<6>[10018.903492] [7: fingerprintd:19294]
<6>[10018.908880] I[0:
swapper/0:
0]
<6>[10018.909111] [1: fingerprintd:19294]
INT
<6>[10018.909131] [1: fingerprintd:19294]
<3>[10018.909145] [1: fingerprintd:19294]
disabled
<6>[10018.916619] [7:
Binder_3: 5078]
eout 0, flag 0, ret 0
<6>[10018.916735] [7:
Binder_3: 5078]
e = 8193, old_enable = 8192
<6>[10018.916745] [7:
Binder_3: 5078]
00000000ns
<6>[10018.916754] [7:
Binder_3: 5078]
, Sensor Type = 0x0, data = 200
<6>[10018.923046] [7:
Binder_3: 5078]
eout 0, flag=0, ret1
<6>[10018.931979] [4:
mc_log: 3354]
ndId :6
<6>[10018.931992] [4:
mc_log: 3354]
: 253

MobiCore mcd: d01|SYNAFP: vfmCaptu


MobiCore mcd: d01|SYNAFP: vfmCaptu
MobiCore mcd: d01|Trustlet Fingerpr
MobiCore mcd: d01|FINGERPRINT comma
MobiCore mcd: d01|[FPLOG]vigis_api
MobiCore mcd: d01|[FPLOG]vigis_cont
MobiCore mcd: d01|SYNAFP: synaFpCa
MobiCore mcd: d01|SYNAFP: vfmCaptu
MobiCore mcd: d01|SYNAFP: scsSenso
MobiCore mcd: d01|SYNAFP: palSpiPr
frequency info : 1000000, prev_cmd
lcd is on : 1, low power mode = 0,
cluster1 cores hotplug out : 0
MobiCore mcd: d01|SYNAFP: palSpiPr
MobiCore mcd: d01|SYNAFP: scsSenso
MobiCore mcd: d01|SYNAFP: scsFwV4.
MobiCore mcd: d01|SYNAFP: vfmCaptu
MobiCore mcd: d01|SYNAFP: synaFpCa
MobiCore mcd: d01|Trustlet Fingerpr
vfsspi_ioctl VFSSPI_IOCTL_SET_DRDY_
vfsspi_enableIrq
vfsspi_irq disableIrq
vfsspi_ioctl VFSSPI_IOCTL_SET_DRDY_
vfsspi_disableIrq
vfsspi_disableIrq DRDY irq already
[SSP] batch 0: delay 200000000, tim
[SSP] set_sensors_enable: new_enabl
[SSP] enable_sensor: add 1, New = 2
[SSP] send_instruction: Inst = 0xa1
[SSP] enable_sensor: delay 200, tim
MobiCore mcd: d01|FINGERPRINT comma
MobiCore mcd: d01|[FPLOG]vigis_api

<6>[10018.932000] [4:
roller : 1166 : 1
<6>[10018.932007] [4:
pture.c 221 4
<6>[10018.932014] [4:
re.c 1158 4
<6>[10018.932022] [4:
re.c 1201 4
<6>[10018.932028] [4:
pture.c 234 4
<6>[10018.932035] [4:
pture.c 265 4
<6>[10018.932041] [4:
re.c 442 4
<6>[10018.932048] [4:
rDevice.c 517 4
<6>[10018.932055] [4:
otocol.c 843 4
<6>[10018.932062] [4:
otocol.c 887 4
<6>[10018.932068] [4:
rDevice.c 611 4
<6>[10018.932075] [4:
re.c 601 4
<6>[10018.932081] [4:
c 1205 4
<6>[10018.932088] [4:
ata.c 354 4
<6>[10018.932095] [4:
onFrame.c 246 4
<6>[10018.932101] [4:
electFrame.c 938 4
<6>[10018.932108] [4:
electFrame.c 1339 4
<6>[10018.932115] [4:
electFrame.c 1078 4
<6>[10018.932122] [4:
electFrame.c 1219 4
<6>[10018.932128] [4:
onFrame.c 597 4
<6>[10018.932135] [4:
ata.c 820 4
<6>[10018.932142] [4:
c 1238 4
<6>[10018.932148] [4:
re.c 811 4
<6>[10018.932165] [4:
pture.c 371 4
<6>[10018.932172] [4:
int::Returning 0
<6>[10018.932629] [1:
<6>[10018.932629] [1:
<6>[10018.932629] [1:
<6>[10018.932629] [1:
<6>[10018.933392] [5:
ndId :6
<6>[10018.933407] [5:
: 253
<6>[10018.933416] [5:
roller : 1166 : 2

mc_log: 3354] MobiCore mcd: d01|[FPLOG]vigis_cont


mc_log: 3354] MobiCore mcd: d01|SYNAFP: synaFpCa
mc_log: 3354] MobiCore mcd: d01|SYNAFP: vfmCaptu
mc_log: 3354] MobiCore mcd: d01|SYNAFP: vfmCaptu
mc_log: 3354] MobiCore mcd: d01|SYNAFP: synaFpCa
mc_log: 3354] MobiCore mcd: d01|SYNAFP: synaFpCa
mc_log: 3354] MobiCore mcd: d01|SYNAFP: vfmCaptu
mc_log: 3354] MobiCore mcd: d01|SYNAFP: scsSenso
mc_log: 3354] MobiCore mcd: d01|SYNAFP: palSpiPr
mc_log: 3354] MobiCore mcd: d01|SYNAFP: palSpiPr
mc_log: 3354] MobiCore mcd: d01|SYNAFP: scsSenso
mc_log: 3354] MobiCore mcd: d01|SYNAFP: vfmCaptu
mc_log: 3354] MobiCore mcd: d01|SYNAFP: irDliRT.
mc_log: 3354] MobiCore mcd: d01|SYNAFP: irDliRTD
mc_log: 3354] MobiCore mcd: d01|SYNAFP: vcsIRrec
mc_log: 3354] MobiCore mcd: d01|SYNAFP: vcsIR2DS
mc_log: 3354] MobiCore mcd: d01|SYNAFP: vcsIR2DS
mc_log: 3354] MobiCore mcd: d01|SYNAFP: vcsIR2DS
mc_log: 3354] MobiCore mcd: d01|SYNAFP: vcsIR2DS
mc_log: 3354] MobiCore mcd: d01|SYNAFP: vcsIRrec
mc_log: 3354] MobiCore mcd: d01|SYNAFP: irDliRTD
mc_log: 3354] MobiCore mcd: d01|SYNAFP: irDliRT.
mc_log: 3354] MobiCore mcd: d01|SYNAFP: vfmCaptu
mc_log: 3354] MobiCore mcd: d01|SYNAFP: synaFpCa
mc_log: 3354] MobiCore mcd: d01|Trustlet Fingerpr
irq/15-SSP_Int:
irq/15-SSP_Int:
irq/15-SSP_Int:
irq/15-SSP_Int:
mc_log:

1775]
1775]
1775]
1775]
3354]

[SSP] [M] batch rate = 20 180 0 0


save bak odr 0, 1, 20, 20, 0
save bak odr 0, 0, 180, 180, 20
AD 0 6 0 1, 180
MobiCore mcd: d01|FINGERPRINT comma

mc_log: 3354] MobiCore mcd: d01|[FPLOG]vigis_api


mc_log: 3354] MobiCore mcd: d01|[FPLOG]vigis_cont

<6>[10018.933423] [5:
mc_log: 3354]
pture.c 382 4
<6>[10018.933430] [5:
mc_log: 3354]
int::Returning 0
<6>[10018.933511] [7: fingerprintd:19294]
INT
<6>[10018.933520] [7: fingerprintd:19294]
<6>[10018.941564] [6:
Binder_A: 5706]
e = 8705, old_enable = 8193
<6>[10018.941577] [6:
Binder_A: 5706]
200000000ns
<6>[10018.941586] [6:
Binder_A: 5706]
, Sensor Type = 0x9, data = 200
<6>[10018.947862] [6:
Binder_A: 5706]
eout 0, flag=0, ret1
<6>[10018.959031] I[0:
swapper/0:
0]
<6>[10018.959083] [7: fingerprintd:19294]
INT
<6>[10018.959093] [7: fingerprintd:19294]
<3>[10018.959100] [7: fingerprintd:19294]
disabled
<6>[10018.959831] [4:
mc_log: 3354]
ndId :6
<6>[10018.959843] [4:
mc_log: 3354]
: 253
<6>[10018.965709] [4:
mc_log: 3354]
roller : 1166 : 2
<6>[10018.965723] [4:
mc_log: 3354]
pture.c 221 4
<6>[10018.965730] [4:
mc_log: 3354]
re.c 1158 4
<6>[10018.965737] [4:
mc_log: 3354]
re.c 1201 4
<6>[10018.965744] [4:
mc_log: 3354]
pture.c 234 4
<6>[10018.965751] [4:
mc_log: 3354]
pture.c 265 4
<6>[10018.965758] [4:
mc_log: 3354]
re.c 442 4
<6>[10018.965765] [4:
mc_log: 3354]
rDevice.c 517 4
<6>[10018.965771] [4:
mc_log: 3354]
otocol.c 843 4
<6>[10018.977791] [4:
mc_log: 3354]
otocol.c 887 4
<6>[10018.977803] [4:
mc_log: 3354]
rDevice.c 611 4
<6>[10018.977811] [4:
mc_log: 3354]
re.c 601 4
<6>[10018.977818] [4:
mc_log: 3354]
c 1205 4
<6>[10018.977825] [4:
mc_log: 3354]
ata.c 354 4
<6>[10018.977832] [4:
mc_log: 3354]
onFrame.c 246 4
<6>[10018.977839] [4:
mc_log: 3354]
electFrame.c 938 4
<6>[10018.977846] [4:
mc_log: 3354]
electFrame.c 1339 4
<6>[10018.977853] [4:
mc_log: 3354]

MobiCore mcd: d01|SYNAFP: synaFpCa


MobiCore mcd: d01|Trustlet Fingerpr
vfsspi_ioctl VFSSPI_IOCTL_SET_DRDY_
vfsspi_enableIrq
[SSP] set_sensors_enable: new_enabl
[SSP] enable_sensor: add 512, New =
[SSP] send_instruction: Inst = 0xa1
[SSP] enable_sensor: delay 200, tim
vfsspi_irq disableIrq
vfsspi_ioctl VFSSPI_IOCTL_SET_DRDY_
vfsspi_disableIrq
vfsspi_disableIrq DRDY irq already
MobiCore mcd: d01|FINGERPRINT comma
MobiCore mcd: d01|[FPLOG]vigis_api
MobiCore mcd: d01|[FPLOG]vigis_cont
MobiCore mcd: d01|SYNAFP: synaFpCa
MobiCore mcd: d01|SYNAFP: vfmCaptu
MobiCore mcd: d01|SYNAFP: vfmCaptu
MobiCore mcd: d01|SYNAFP: synaFpCa
MobiCore mcd: d01|SYNAFP: synaFpCa
MobiCore mcd: d01|SYNAFP: vfmCaptu
MobiCore mcd: d01|SYNAFP: scsSenso
MobiCore mcd: d01|SYNAFP: palSpiPr
MobiCore mcd: d01|SYNAFP: palSpiPr
MobiCore mcd: d01|SYNAFP: scsSenso
MobiCore mcd: d01|SYNAFP: vfmCaptu
MobiCore mcd: d01|SYNAFP: irDliRT.
MobiCore mcd: d01|SYNAFP: irDliRTD
MobiCore mcd: d01|SYNAFP: vcsIRrec
MobiCore mcd: d01|SYNAFP: vcsIR2DS
MobiCore mcd: d01|SYNAFP: vcsIR2DS
MobiCore mcd: d01|SYNAFP: vcsIR2DS

electFrame.c 1140 4
<6>[10018.977860] [4:
mc_log: 3354] MobiCore mcd: d01|SYNAFP: vcsIR2DS
electFrame.c 1219 4
<6>[10018.977864] [6: fingerprintd:19294] vfsspi_ioctl VFSSPI_IOCTL_SET_DRDY_
INT
<6>[10018.977873] [6: fingerprintd:19294] vfsspi_enableIrq
<6>[10018.977883] [4:
mc_log: 3354] MobiCore mcd: d01|SYNAFP: vcsIRrec
onFrame.c 597 4
<6>[10018.977890] [4:
mc_log: 3354] MobiCore mcd: d01|SYNAFP: irDliRTD
ata.c 820 4
<6>[10018.977896] [4:
mc_log: 3354] MobiCore mcd: d01|SYNAFP: irDliRT.
c 1238 4
<6>[10018.977903] [4:
mc_log: 3354] MobiCore mcd: d01|SYNAFP: vfmCaptu
re.c 811 4
<6>[10018.977910] [4:
mc_log: 3354] MobiCore mcd: d01|SYNAFP: synaFpCa
pture.c 364 4
<6>[10018.977916] [4:
mc_log: 3354] MobiCore mcd: d01|Trustlet Fingerpr
int::Returning 0
<6>[10019.004679] [4:SSRM Handler Th: 9082] sec-battery battery.51: sec_bat_sto
re_attrs: siop level: 70
<6>[10019.004697] [4:SSRM Handler Th: 9082] bq51221_chg_set_property siop = 70
<6>[10019.004821] I[0:
swapper/0:
0] vfsspi_irq disableIrq
<6>[10019.004860] [0:
kworker/0:0:13589] sec_bat_siop_work : set current by
siop level(70)
<6>[10019.004884] [7: fingerprintd:19294] vfsspi_ioctl VFSSPI_IOCTL_SET_DRDY_
INT
<6>[10019.004895] [7: fingerprintd:19294] vfsspi_disableIrq
<6>[10019.004904] [0:
kworker/0:0:13589] max77843_set_current: siop_level=70
, afc_detec=0, current_max=460, current_now=0
<6>[10019.004918] [0:
kworker/0:0:13589] max77843_set_current: siop_level=70
, afc_detec=0, current_max=460, current_now=0
<3>[10019.004932] [7: fingerprintd:19294] vfsspi_disableIrq DRDY irq already
disabled
<6>[10019.005122] [0:
kworker/0:0:13589] max77843_check_aicl_state aicl stat
e
<6>[10019.005384] [0:
kworker/0:0:13589] [max77843_set_charge_current] REG(0
xb9) DATA(0x80), CURRENT(0)
<6>[10019.006200] [4:
mc_log: 3354] MobiCore mcd: d01|FINGERPRINT comma
ndId :6
<7>[10019.006313] [0:
kworker/0:0:13589] max77843_set_buck : CHG_CNFG_00(0x1
4)
<6>[10019.006540] [0:
kworker/0:0:13589] [max77843_set_input_current] REG(0x
c0) DATA(0x17)
<7>[10019.006712] [0:
kworker/0:0:13589] MAX77843 addr : 0xb1 data : 0x1a
<7>[10019.006888] [0:
kworker/0:0:13589] MAX77843 addr : 0xb2 data : 0x9d
<7>[10019.007059] [0:
kworker/0:0:13589] MAX77843 addr : 0xb3 data : 0x00
<7>[10019.007227] [0:
kworker/0:0:13589] MAX77843 addr : 0xb4 data : 0x38
<7>[10019.007396] [0:
kworker/0:0:13589] MAX77843 addr : 0xb5 data : 0x00
<7>[10019.007565] [0:
kworker/0:0:13589] MAX77843 addr : 0xb6 data : 0xff
<7>[10019.007737] [0:
kworker/0:0:13589] MAX77843 addr : 0xb7 data : 0x14
<7>[10019.008032] [0:
kworker/0:0:13589] MAX77843 addr : 0xb8 data : 0x30
<7>[10019.008210] [0:
kworker/0:0:13589] MAX77843 addr : 0xb9 data : 0x80
<7>[10019.008375] [0:
kworker/0:0:13589] MAX77843 addr : 0xba data : 0x38
<7>[10019.008536] [0:
kworker/0:0:13589] MAX77843 addr : 0xbb data : 0x9d
<7>[10019.008698] [0:
kworker/0:0:13589] MAX77843 addr : 0xbc data : 0x96
<7>[10019.008881] [0:
kworker/0:0:13589] MAX77843 addr : 0xbd data : 0x0c
<7>[10019.009059] [0:
kworker/0:0:13589] MAX77843 addr : 0xbe data : 0x30
<7>[10019.009232] [0:
kworker/0:0:13589] MAX77843 addr : 0xbf data : 0xff
<7>[10019.009407] [0:
kworker/0:0:13589] MAX77843 addr : 0xc0 data : 0x0d
<6>[10019.009514] [4:
mc_log: 3354] MobiCore mcd: d01|[FPLOG]vigis_api

: 253
<6>[10019.009525] [4:
mc_log: 3354] MobiCore mcd: d01|[FPLOG]vigis_cont
roller : 1166 : 2
<6>[10019.009533] [4:
mc_log: 3354] MobiCore mcd: d01|SYNAFP: synaFpCa
pture.c 221 4
<6>[10019.009540] [4:
mc_log: 3354] MobiCore mcd: d01|SYNAFP: vfmCaptu
re.c 1158 4
<6>[10019.009547] [4:
mc_log: 3354] MobiCore mcd: d01|SYNAFP: vfmCaptu
re.c 1201 4
<6>[10019.009554] [4:
mc_log: 3354] MobiCore mcd: d01|SYNAFP: synaFpCa
pture.c 234 4
<7>[10019.009596] [0:
kworker/0:0:13589] MAX77843 addr : 0xc1 data : 0x17
<7>[10019.009767] [0:
kworker/0:0:13589] MAX77843 addr : 0xc2 data : 0x00
<7>[10019.009947] [0:
kworker/0:0:13589] MAX77843 addr : 0xc3 data : 0x67
<6>[10019.010483] [0:
mc_log: 3354] MobiCore mcd: d01|SYNAFP: synaFpCa
pture.c 265 4
<6>[10019.010503] [0:
mc_log: 3354] MobiCore mcd: d01|SYNAFP: vfmCaptu
re.c 442 4
<6>[10019.010521] [0:
mc_log: 3354] MobiCore mcd: d01|SYNAFP: scsSenso
rDevice.c 517 4
<6>[10019.016052] [4:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 a4 19 43 00 00 00
<6>[10019.016475] [4:
mc_log: 3354] MobiCore mcd: d01|SYNAFP: palSpiPr
otocol.c 843 4
<6>[10019.026358] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26660
<6>[10019.026388] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10019.026432] [3:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[10019.026450] [3:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[10019.026469] [3:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work was
cancelled
<6>[10019.027067] [3:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[10019.027290] [3:
mc_log: 3354] MobiCore mcd: d01|SYNAFP: palSpiPr
otocol.c 887 4
<6>[10019.027314] [3:
mc_log: 3354] MobiCore mcd: d01|SYNAFP: scsSenso
rDevice.c 611 4
<6>[10019.027332] [3:
mc_log: 3354] MobiCore mcd: d01|SYNAFP: vfmCaptu
re.c 601 4
<6>[10019.027349] [3:
mc_log: 3354] MobiCore mcd: d01|SYNAFP: irDliRT.
c 1205 4
<6>[10019.027366] [3:
mc_log: 3354] MobiCore mcd: d01|SYNAFP: irDliRTD
ata.c 354 4
<6>[10019.027383] [3:
mc_log: 3354] MobiCore mcd: d01|SYNAFP: vcsIRrec
onFrame.c 246 4
<6>[10019.027401] [3:
mc_log: 3354] MobiCore mcd: d01|SYNAFP: vcsIR2DS
electFrame.c 938 4
<6>[10019.027417] [7: fingerprintd:19294] vfsspi_ioctl VFSSPI_IOCTL_SET_DRDY_
INT
<6>[10019.027431] [7: fingerprintd:19294] vfsspi_enableIrq
<6>[10019.027447] [3:
mc_log: 3354] MobiCore mcd: d01|SYNAFP: vcsIR2DS
electFrame.c 1339 4
<6>[10019.027465] [3:
mc_log: 3354] MobiCore mcd: d01|SYNAFP: vcsIR2DS
electFrame.c 1122 4
<6>[10019.027482] [3:
mc_log: 3354] MobiCore mcd: d01|SYNAFP: vcsIR2DS
electFrame.c 1127 4
<6>[10019.027500] [3:
mc_log: 3354] MobiCore mcd: d01|SYNAFP: vcsIRrec
onFrame.c 597 4
<6>[10019.027517] [3:
mc_log: 3354] MobiCore mcd: d01|SYNAFP: irDliRTD

ata.c 820 4
<6>[10019.027534] [3:
c 1238 4
<6>[10019.027551] [3:
re.c 811 4
<6>[10019.027568] [3:
pture.c 364 4
<6>[10019.027585] [3:
int::Returning 0
<3>[10019.027773] [2:
<6>[10019.037712] [0:
00 80 03 01 02 a4 19 43
<6>[10019.054215] I[0:
<6>[10019.054281] [7:
INT
<6>[10019.054292] [7:
<3>[10019.054299] [7:
disabled
<6>[10019.065601] [6:
ndId :6
<6>[10019.065615] [6:
: 253
<6>[10019.065623] [6:
roller : 1166 : 2
<6>[10019.065631] [6:
pture.c 221 4
<6>[10019.065638] [6:
re.c 1158 4
<6>[10019.065645] [6:
re.c 1201 4
<6>[10019.065651] [6:
pture.c 234 4
<6>[10019.065658] [6:
pture.c 265 4
<6>[10019.065665] [6:
re.c 442 4
<6>[10019.065672] [6:
rDevice.c 517 4
<6>[10019.065679] [6:
otocol.c 843 4
<6>[10019.082261] [4:
otocol.c 887 4
<6>[10019.082275] [4:
rDevice.c 611 4
<6>[10019.082284] [4:
re.c 601 4
<6>[10019.082292] [4:
c 1205 4
<6>[10019.082298] [4:
ata.c 354 4
<6>[10019.082305] [4:
onFrame.c 246 4
<6>[10019.082312] [4:
electFrame.c 938 4
<6>[10019.082319] [4:
electFrame.c 1339 4
<6>[10019.082326] [4:
electFrame.c 1148 4
<6>[10019.082332] [4:
electFrame.c 1155 4

mc_log: 3354] MobiCore mcd: d01|SYNAFP: irDliRT.


mc_log: 3354] MobiCore mcd: d01|SYNAFP: vfmCaptu
mc_log: 3354] MobiCore mcd: d01|SYNAFP: synaFpCa
mc_log: 3354] MobiCore mcd: d01|Trustlet Fingerpr
hci_thread: 6674]
qmuxd: 4756]
00 7f 00 02 04 00
swapper/0:
0]
fingerprintd:19294]

[BT] set_wake_locked value = 1


[mhi_uci_dump_log] uci_read: 01 8b
vfsspi_irq disableIrq
vfsspi_ioctl VFSSPI_IOCTL_SET_DRDY_

fingerprintd:19294] vfsspi_disableIrq
fingerprintd:19294] vfsspi_disableIrq DRDY irq already
mc_log: 3354] MobiCore mcd: d01|FINGERPRINT comma
mc_log: 3354] MobiCore mcd: d01|[FPLOG]vigis_api
mc_log: 3354] MobiCore mcd: d01|[FPLOG]vigis_cont
mc_log: 3354] MobiCore mcd: d01|SYNAFP: synaFpCa
mc_log: 3354] MobiCore mcd: d01|SYNAFP: vfmCaptu
mc_log: 3354] MobiCore mcd: d01|SYNAFP: vfmCaptu
mc_log: 3354] MobiCore mcd: d01|SYNAFP: synaFpCa
mc_log: 3354] MobiCore mcd: d01|SYNAFP: synaFpCa
mc_log: 3354] MobiCore mcd: d01|SYNAFP: vfmCaptu
mc_log: 3354] MobiCore mcd: d01|SYNAFP: scsSenso
mc_log: 3354] MobiCore mcd: d01|SYNAFP: palSpiPr
mc_log: 3354] MobiCore mcd: d01|SYNAFP: palSpiPr
mc_log: 3354] MobiCore mcd: d01|SYNAFP: scsSenso
mc_log: 3354] MobiCore mcd: d01|SYNAFP: vfmCaptu
mc_log: 3354] MobiCore mcd: d01|SYNAFP: irDliRT.
mc_log: 3354] MobiCore mcd: d01|SYNAFP: irDliRTD
mc_log: 3354] MobiCore mcd: d01|SYNAFP: vcsIRrec
mc_log: 3354] MobiCore mcd: d01|SYNAFP: vcsIR2DS
mc_log: 3354] MobiCore mcd: d01|SYNAFP: vcsIR2DS
mc_log: 3354] MobiCore mcd: d01|SYNAFP: vcsIR2DS
mc_log: 3354] MobiCore mcd: d01|SYNAFP: vcsIR2DS

<6>[10019.082339]
onFrame.c 459 4
<6>[10019.082345]
onFrame.c 493 4
<6>[10019.082352]
.c 2013 4
<6>[10019.082359]
tProcess.c 2898 4
<6>[10019.082366]
tProcess.c 3080 4
<6>[10019.082372]
lity.c 83 4
<6>[10019.082379]
lity.c 409 4
<6>[10019.082385]
lity.c 415 4
<6>[10019.082392]
onFrame.c 535 4
<6>[10019.082398]
ata.c 820 4
<6>[10019.082405]
c 1238 4
<6>[10019.099129]
rDevice.c 464 4
<6>[10019.099144]
otocol.c 843 4
<6>[10019.099153]
otocol.c 887 4
<6>[10019.099160]
rDevice.c 552 4
<6>[10019.099168]
otocol.c 1301 4
<6>[10019.099175]
re.c 811 4
<6>[10019.099182]
pture.c 325 4
<6>[10019.099189]
re.c 838 4
<6>[10019.099196]
c 1205 4
<6>[10019.099203]
ata.c 354 4
<6>[10019.099209]
ata.c 386 3
<6>[10019.099216]
ata.c 820 4
<6>[10019.099223]
c 1238 4
<6>[10019.099230]
c 1371 4
<6>[10019.099236]
c 1491 4
<6>[10019.099242]
c 2299 4
<6>[10019.099249]
c 2331 4
<6>[10019.099255]
c 1307 4
<6>[10019.099262]
c 1344 4

[4:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: vcsIRrec

[4:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: vcsIRrec

[4:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: vcsIRApi

[4:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: vcsIRpos

[4:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: vcsIRpos

[4:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: vcsIRqua

[4:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: vcsIRqua

[4:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: vcsIRqua

[4:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: vcsIRrec

[4:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: irDliRTD

[4:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: irDliRT.

[4:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: scsSenso

[4:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: palSpiPr

[4:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: palSpiPr

[4:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: scsSenso

[4:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: palSpiPr

[4:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: vfmCaptu

[4:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: synaFpCa

[4:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: vfmCaptu

[4:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: irDliRT.

[4:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: irDliRTD

[4:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: irDliRTD

[4:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: irDliRTD

[4:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: irDliRT.

[4:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: irDliRT.

[4:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: irDliRT.

[4:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: irDliRT.

[4:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: irDliRT.

[4:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: irDliRT.

[4:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: irDliRT.

<6>[10019.099269]
c 1143 4
<6>[10019.099276]
.c 921 4
<6>[10019.099282]
.c 1184 4
<6>[10019.099289]
.c 263 4
<6>[10019.099295]
.c 278 4
<6>[10019.099302]
c 1775 4
<6>[10019.099309]
c 1818 4
<6>[10019.099315]
c 1178 4
<6>[10019.099321]
re.c 133 4
<6>[10019.099328]
re.c 1079 4
<6>[10019.099335]
pture.c 356 4
<6>[10019.099341]
re.c 1222 4
<6>[10019.099348]
.c 604 4
<6>[10019.099354]
.c 637 2
<6>[10019.099360]
.c 698 4
<6>[10019.099367]
re.c 1250 4
<6>[10019.099373]
re.c 1222 4
<6>[10019.099380]
.c 604 4
<6>[10019.099386]
.c 698 4
<6>[10019.099393]
re.c 1250 4
<6>[10019.099399]
.c 720 4
<6>[10019.099406]
.c 788 4
<6>[10019.099412]
.c 1090 4
<6>[10019.099419]
.c 1090 4
<6>[10019.099425]
.c 263 4
<6>[10019.099431]
.c 278 4
<6>[10019.113015]
<6>[10019.113015]
<6>[10019.113015]
<6>[10019.113015]
<6>[10019.113015]
<6>[10019.113015]
<6>[10019.113015]
in=3 lux=53

[4:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: irDliRT.

[4:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: vcsIRApi

[4:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: vcsIRApi

[4:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: vcsImage

[4:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: vcsImage

[4:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: irDliRT.

[4:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: irDliRT.

[4:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: irDliRT.

[4:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: vfmCaptu

[4:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: vfmCaptu

[4:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: synaFpCa

[4:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: vfmCaptu

[4:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: vcsImage

[4:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: vcsImage

[4:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: vcsImage

[4:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: vfmCaptu

[4:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: vfmCaptu

[4:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: vcsImage

[4:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: vcsImage

[4:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: vfmCaptu

[4:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: vcsImage

[4:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: vcsImage

[4:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: vcsImage

[4:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: vcsImage

[4:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: vcsImage

[4:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: vcsImage

[1:
[1:
[1:
[1:
[1:
[1:
[1:

irq/15-SSP_Int:
irq/15-SSP_Int:
irq/15-SSP_Int:
irq/15-SSP_Int:
irq/15-SSP_Int:
irq/15-SSP_Int:
irq/15-SSP_Int:

1775]
1775]
1775]
1775]
1775]
1775]
1775]

[SSP] [M] #>LIGO 0x22


Add 9
batch rate = 110 180 0 0
save bak odr 9, 1, 180, 180, 0
save bak odr 9, 0, 180, 180, 0
AD 9 1 0 1, 180
#>r=34 g=27 b=30 c=85 atime=245 aga

<6>[10019.113523] [4:
mc_log: 3354]
int::Returning 0
<6>[10019.115552] [5:
mc_log: 3354]
ndId :6
<6>[10019.115565] [5:
mc_log: 3354]
: 253
<6>[10019.115574] [5:
mc_log: 3354]
roller : 1166 : 4
<6>[10019.131912] I[1: irq/15-SSP_Int: 1775]
26, 1, 3, -125, -86, 51, 0, 1
<6>[10019.132807] [3:ssp_sensorhub_t: 1783]
skipped
<6>[10019.132931] I[6:SensorHubServic: 3439]
26, 1, 3, -125, -86, 51, 0, 1
<6>[10019.135756] [6: MHI_EV_THREAD: 4604]
ceived ring 0x0
<6>[10019.135798] [3:MHI_STATE_THREA: 4605]
ng to 3
<6>[10019.135824] [3:MHI_STATE_THREA: 4605]
M1 state transition from state 3
<6>[10019.135848] [3:MHI_STATE_THREA: 4605]
ansition to M2
<6>[10019.136046] [3:MHI_STATE_THREA: 4605]
deferred work
<6>[10019.172965] [1:
Binder_2:30887]
58, 1, 0
<6>[10019.172993] [1:
Binder_2:30887]
, Sensor Type = 0x3a, data = 1
<6>[10019.191484] I[1: irq/15-SSP_Int: 1775]
58, 1
<6>[10019.191542] [3:ssp_sensorhub_t: 1783]
skipped
<6>[10019.191581] I[2:SensorHubServic: 3439]
58, 1
<6>[10019.195574] [0: thread_hotplug:19286]
0, exe_cmd 4
<6>[10019.195599] [0: thread_hotplug:19286]
dm_hotplug disable = 0
<6>[10019.195614] [0: thread_hotplug:19286]
<6>[10019.262209] [0:
kworker/0:1:25228]
<6>[10019.262240] [0:
kworker/0:1:25228]
<6>[10019.262287] [0:
kworker/0:1:25228]
<6>[10019.262304] [0:
kworker/0:1:25228]
<4>[10019.280660] [0:
kworker/0:1:25228]
<4>[10019.283831] [0:
kworker/0:0:13589]
<6>[10019.291994] [1: irq/15-SSP_Int: 1775]
me=245 again=3 lux=53
<6>[10019.471721] [1: irq/15-SSP_Int: 1775]
me=245 again=3 lux=54
<6>[10019.490995] I[1: irq/15-SSP_Int: 1775]
26, 1, 3, -125, -85, -102, 0, 0
<6>[10019.491047] [7:ssp_sensorhub_t: 1783]
skipped
<6>[10019.491073] I[5:SensorHubServic: 3439]
26, 1, 3, -125, -85, -102, 0, 0
<6>[10019.543794] I[0:
swapper/0:
0]
ake is deasserted. release wakelock in 1s
<6>[10019.589829] [4:
mc_log: 3354]
: 308 : 120
<6>[10019.589843] [4:
mc_log: 3354]

MobiCore mcd: d01|Trustlet Fingerpr


MobiCore mcd: d01|FINGERPRINT comma
MobiCore mcd: d01|[FPLOG]vigis_api
MobiCore mcd: d01|[FPLOG]vigis_cont
[SSP] ssp_sensorhub_list(10): 1, 1,
wakeup source sensorhub activation
[SSP] ssp_sensorhub_read(10): 1, 1,
[mhi_process_event_ring] MHI STE re
[process_stt_work_item] Transitioni
[process_M1_transition] Processing
[process_M1_transition] Allowing tr
[process_M1_transition] Starting M3
[SSP] ssp_sensorhub_write(4): -72,
[SSP] send_instruction: Inst = 0xb8
[SSP] ssp_sensorhub_list(4): 1, 1,
wakeup source sensorhub activation
[SSP] ssp_sensorhub_read(4): 1, 1,
frequency info : 1000000, prev_cmd
lcd is on : 1, low power mode = 0,
cluster1 cores hotplug out : 0
sync_system +
sync_system sync_system +
sync_system Emergency Sync complete
Emergency Sync complete
[SSP] [M] #>r=34 g=27 b=30 c=85 ati
[SSP] [M] #>r=34 g=28 b=30 c=86 ati
[SSP] ssp_sensorhub_list(10): 1, 1,
wakeup source sensorhub activation
[SSP] ssp_sensorhub_read(10): 1, 1,
[BT] update_host_wake_locked host_w
MobiCore mcd: d01|[FPLOG]vigis_api
MobiCore mcd: d01|Trustlet Fingerpr

int::Returning 0
<6>[10019.599644] [2:
mc_log: 3354]
ndId :c
<6>[10019.599698] [2:
mc_log: 3354]
opcode : 46
<6>[10019.599742] [2:
mc_log: 3354]
int::Returning 0
<6>[10019.600053] [7: fingerprintd:19294]
UP OFF
<6>[10019.600070] [7: fingerprintd:19294]
1, active_cpu=0x00000004
<6>[10019.600162] [4:
mc_fastcall: 1747]
<6>[10019.602155] [5: fingerprintd:19294]
UP ON:2, retry: 0
<6>[10019.602167] [5: fingerprintd:19294]
ling time is too short. wait 10ms
<6>[10019.618485] [4: fingerprintd:19294]
4, active_cpu=0x00000001
<6>[10019.618654] [1:
mc_fastcall: 1747]
<6>[10019.619566] [4:
mc_log: 3354]
ndId :7
<6>[10019.630020] [4:
mc_log: 3354]
: 329
<6>[10019.630040] [4:
mc_log: 3354]
roller : 1166 : 6
<6>[10019.630051] [4:
mc_log: 3354]
pture.c 394 4
<6>[10019.630060] [4:
mc_log: 3354]
re.c 161 4
<6>[10019.630070] [4:
mc_log: 3354]
.c 263 4
<6>[10019.630079] [4:
mc_log: 3354]
.c 278 4
<6>[10019.630088] [4:
mc_log: 3354]
ts.c 981 3
<6>[10019.630097] [4:
mc_log: 3354]
orLineUpdate.c 3706 3
<6>[10019.630107] [4:
mc_log: 3354]
intCmdHelpers.c 3842 4
<6>[10019.630116] [4:
mc_log: 3354]
intCmdHelpers.c 3842 4
<6>[10019.630125] [4:
mc_log: 3354]
intCmdHelpers.c 1472 3
<6>[10019.630134] [4:
mc_log: 3354]
rDevice.c 463 4
<6>[10019.649129] [1:
mc_log: 3354]
otocol.c 843 4
<6>[10019.671052] [0: fingerprintd:19294]
INT
<6>[10019.671082] [0: fingerprintd:19294]
<3>[10019.671097] [0: fingerprintd:19294]
disabled
<6>[10019.671255] [0:
mc_log: 3354]
otocol.c 887 4
<6>[10019.671280] [0:
mc_log: 3354]
rDevice.c 557 4
<6>[10019.671297] [0:
mc_log: 3354]
c 270 4
<6>[10019.671315] [0:
mc_log: 3354]
c 312 4

MobiCore mcd: d01|FINGERPRINT comma


MobiCore mcd: d01|do_extra_control
MobiCore mcd: d01|Trustlet Fingerpr
vfsspi_ioctl VFSSPI_IOCTL_CPU_SPEED
MobiCore mcd: <- core_num=0x0000000
MobiCore mcd: CoreSwap ok 4 -> 1
vfsspi_ioctl VFSSPI_IOCTL_CPU_SPEED
secos_booster_request_pm_qos: recal
MobiCore mcd: <- core_num=0x0000000
MobiCore mcd: CoreSwap ok 1 -> 4
MobiCore mcd: d01|FINGERPRINT comma
MobiCore mcd: d01|[FPLOG]vigis_api
MobiCore mcd: d01|[FPLOG]vigis_cont
MobiCore mcd: d01|SYNAFP: synaFpCa
MobiCore mcd: d01|SYNAFP: vfmCaptu
MobiCore mcd: d01|SYNAFP: vcsImage
MobiCore mcd: d01|SYNAFP: vcsImage
MobiCore mcd: d01|SYNAFP: calResul
MobiCore mcd: d01|SYNAFP: scsWinds
MobiCore mcd: d01|SYNAFP: scsGetPr
MobiCore mcd: d01|SYNAFP: scsGetPr
MobiCore mcd: d01|SYNAFP: scsGetPr
MobiCore mcd: d01|SYNAFP: scsSenso
MobiCore mcd: d01|SYNAFP: palSpiPr
vfsspi_ioctl VFSSPI_IOCTL_SET_DRDY_
vfsspi_disableIrq
vfsspi_disableIrq DRDY irq already
MobiCore mcd: d01|SYNAFP: palSpiPr
MobiCore mcd: d01|SYNAFP: scsSenso
MobiCore mcd: d01|SYNAFP: irDliRT.
MobiCore mcd: d01|SYNAFP: irDliRT.

<6>[10019.671332]
c 705 4
<6>[10019.671361]
c 722 4
<6>[10019.671379]
.c 104 4
<6>[10019.671397]
.c 214 4
<6>[10019.671414]
c 2420 4
<6>[10019.671431]
c 599 4
<6>[10019.671448]
c 794 4
<6>[10019.671465]
c 549 4
<6>[10019.671482]
c 665 4
<6>[10019.671500]
electFrame.c 938 4
<6>[10019.671517]
c 2685 4
<6>[10019.671533]
.c 85 4
<6>[10019.671551]
.c 1845 4
<6>[10019.671568]
.c 1908 4
<6>[10019.671585]
.c 905 4
<6>[10019.671602]
c 1122 4
<6>[10019.671619]
re.c 108 4
<6>[10019.671636]
re.c 418 4
<6>[10019.671653]
int::Returning 0
<6>[10019.682352]
ndId :a
<6>[10019.682372]
: 373 : 25
<6>[10019.682382]
: 387
<6>[10019.682392]
pture.c 63 4
<6>[10019.682401]
pture.c 522 4
<6>[10019.682410]
re.c 1099 4
<6>[10019.682419]
rDevice.c 464 4
<6>[10019.682428]
otocol.c 843 4
<6>[10019.682438]
otocol.c 887 4
<6>[10019.682446]
rDevice.c 552 4
<6>[10019.687753]
otocol.c 1301 4

[0:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: irDliRT.

[0:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: irDliRT.

[0:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: vcsImage

[0:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: vcsImage

[0:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: irDliRT.

[0:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: dliUtil.

[0:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: dliUtil.

[0:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: irDliRT.

[0:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: irDliRT.

[0:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: vcsIR2DS

[0:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: irDliRT.

[0:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: vcsIRApi

[0:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: vcsIRApi

[0:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: vcsIRApi

[0:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: vcsIRApi

[0:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: irDliRT.

[0:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: vfmCaptu

[0:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: vfmCaptu

[0:

mc_log: 3354] MobiCore mcd: d01|Trustlet Fingerpr

[4:

mc_log: 3354] MobiCore mcd: d01|FINGERPRINT comma

[4:

mc_log: 3354] MobiCore mcd: d01|[FPLOG]vigis_api

[4:

mc_log: 3354] MobiCore mcd: d01|[FPLOG]vigis_api

[4:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: synaFpCa

[4:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: synaFpCa

[4:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: vfmCaptu

[4:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: scsSenso

[4:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: palSpiPr

[4:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: palSpiPr

[4:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: scsSenso

[1:

mc_log: 3354] MobiCore mcd: d01|SYNAFP: palSpiPr

<6>[10019.687788] [1:
mc_log: 3354] MobiCore mcd: d01|SYNAFP: irDliRT.
c 1143 4
<6>[10019.687807] [1:
mc_log: 3354] MobiCore mcd: d01|SYNAFP: vcsIRApi
.c 921 4
<6>[10019.687824] [1:
mc_log: 3354] MobiCore mcd: d01|SYNAFP: vcsIRApi
.c 1184 4
<6>[10019.687842] [1:
mc_log: 3354] MobiCore mcd: d01|SYNAFP: vcsImage
.c 263 4
<6>[10019.687853] [7: fingerprintd:19294] vfsspi_ioctl VFSSPI_IOCTL_SET_LOCKS
CREEN :OFF
<6>[10019.687869] [7: fingerprintd:19294] vfsspi_ioctl VFSSPI_IOCTL_CPU_SPEED
UP OFF
<6>[10019.687884] [7: fingerprintd:19294] MobiCore mcd: <- core_num=0x0000000
1, active_cpu=0x00000004
<6>[10019.687906] [1:
mc_log: 3354] MobiCore mcd: d01|SYNAFP: vcsImage
.c 278 4
<6>[10019.687923] [1:
mc_log: 3354] MobiCore mcd: d01|SYNAFP: irDliRT.
c 1775 4
<6>[10019.687940] [1:
mc_log: 3354] MobiCore mcd: d01|SYNAFP: vcsImage
.c 263 4
<6>[10019.687957] [1:
mc_log: 3354] MobiCore mcd: d01|SYNAFP: vcsImage
.c 278 4
<6>[10019.687974] [1:
mc_log: 3354] MobiCore mcd: d01|SYNAFP: irDliRT.
c 1818 4
<6>[10019.687991] [1:
mc_log: 3354] MobiCore mcd: d01|SYNAFP: irDliRT.
c 1178 4
<6>[10019.688009] [1:
mc_log: 3354] MobiCore mcd: d01|SYNAFP: vfmCaptu
re.c 133 4
<6>[10019.688026] [1:
mc_log: 3354] MobiCore mcd: d01|SYNAFP: vfmCaptu
re.c 1138 4
<6>[10019.688037] [4:
mc_fastcall: 1747] MobiCore mcd: CoreSwap ok 4 -> 1
<6>[10019.688060] [1:
mc_log: 3354] MobiCore mcd: d01|SYNAFP: synaFpCa
pture.c 544 4
<6>[10019.688077] [1:
mc_log: 3354] MobiCore mcd: d01|Trustlet Fingerpr
int::Returning 0
<6>[10019.695586] [0: thread_hotplug:19286] frequency info : 1000000, prev_cmd
0, exe_cmd 4
<6>[10019.695614] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10019.695629] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10019.711099] [7:
mc_log: 3354] MobiCore mcd: e01|TL_TZ_KEYSTORE: S
tarting
<6>[10019.715537] [6:
mc_log: 3354] MobiCore mcd: e01|TL_TZ_KEYSTORE: G
ot a message!
<6>[10019.715555] [6:
mc_log: 3354] MobiCore mcd: e01|TZ_KEYSTORE: we g
ot a command
<6>[10019.715566] [6:
mc_log: 3354] MobiCore mcd: e01|TZ_KEYSTORE: proc
ess_cmd: CMD_TZ_KEYSTORE_init:
<6>[10019.715576] [6:
mc_log: 3354] MobiCore mcd: e01|TIMA trustlet: g
et_sec_TIMA_address tima_sec_mem_addr : FE800000
<6>[10019.715586] [6:
mc_log: 3354] MobiCore mcd: 501|drTima: processin
g TIMA_DRIVER_PHYS_MEM_ACCESS_COPY
<6>[10019.717165] [6:
mc_log: 3354] MobiCore mcd: 501|drTima: data_len
= 32 = 0x20
<6>[10019.717178] [6:
mc_log: 3354] MobiCore mcd: 501|drTima: PHYS_READ
<6>[10019.717190] [6:
mc_log: 3354] MobiCore mcd: e01|TIMA trustlet: wa
rranty violation detected 18
<6>[10019.717202] [6:
mc_log: 3354] MobiCore mcd: e01|TZ_COMMON: Initia
lize failed - tamper fuse set
<6>[10019.717214] [6:
mc_log: 3354] MobiCore mcd: e01|Trustlet TL_TZ_KE

YSTORE: sendmsg->header.id = 0x00000001


<6>[10019.717973] [6:
mc_log: 3354] MobiCore mcd: e01|Trustlet TL_TZ_KE
YSTORE: respmsg->header.id = 0x80000001
<6>[10019.717991] [6:
mc_log: 3354] MobiCore mcd: e01|Trustlet TL_TZ_KE
YSTORE: respmsg->header.status = 0x00000000
<6>[10019.718004] [6:
mc_log: 3354] MobiCore mcd: e01|TL_TZ_KEYSTORE: R
eturning = 0x00000000
<6>[10019.722247] [6:
mc_log: 3354] MobiCore mcd: 104| SMGNT send MSG_C
LOSE_TRUSTLET for thread e01 to IPCH
<6>[10019.722270] [6:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 202 (UUID=02010000-0000-0000-0000-000000005000) (server 0/8 status i
s 00000001)
<6>[10019.725702] [1:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 302 (UUID=ffffffff-0000-0000-0000-000000000002) (server 1/8 status i
s 00000001)
<6>[10019.725740] [1:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 402 (UUID=ffffffff-0000-0000-0000-000000000001) (server 2/8 status i
s 00000001)
<6>[10019.728950] [1:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 501 (UUID=ffffffff-d000-0000-0000-00000000000a) (server 3/8 status i
s 00000001)
<6>[10019.728986] [1:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 602 (UUID=ffffffff-d000-0000-0000-000000000016) (server 4/8 status i
s 00000001)
<6>[10019.732350] [1:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 702 (UUID=07050500-0000-0000-0000-000000000000) (server 5/8 status i
s 00000001)
<6>[10019.735840] [1:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to b02 (UUID=ffffffff-d000-0000-0000-00000000000e) (server 6/8 status i
s 00000001)
<6>[10019.745474] [1:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 902 (UUID=ffffffff-d000-0000-0000-000000000014) (server 7/8 status i
s 00000001)
<6>[10019.745540] [1:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop do
ne
<6>[10019.747460] [1:
mc_log: 3354] MobiCore mcd: 501|drTima: MSG_CLOSE
_TRUSTLET call 0x40001
<6>[10019.751356] [1:
mc_log: 3354] MobiCore mcd: b02|Driver SPI receiv
es MSG_CLOSE_TRUSTLET[0x00040001, 0x0001000e]
<6>[10019.751387] [1:
mc_log: 3354] MobiCore mcd: 104| SMGNT smgntClose
Session done
<6>[10019.765104] [6: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa266a0
<6>[10019.765134] [6: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10019.765170] [6:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[10019.765186] [6:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[10019.765200] [6:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work was
cancelled
<6>[10019.766044] [6:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[10019.775238] [6: MHI_EV_THREAD: 4604] [mhi_process_event_ring] Empty OOB
chan 100
<6>[10019.791029] I[1: irq/15-SSP_Int: 1775] [SSP] ssp_sensorhub_list(10): 1, 1,
26, 1, 3, -125, -84, -59, 1, 0
<6>[10019.791107] [7:ssp_sensorhub_t: 1783] wakeup source sensorhub activation
skipped
<6>[10019.791159] I[5:SensorHubServic: 3439] [SSP] ssp_sensorhub_read(10): 1, 1,
26, 1, 3, -125, -84, -59, 1, 0
<6>[10019.874378] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re

ceived ring 0x0


<6>[10019.874446] [3:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[10019.874467] [3:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[10019.874497] [3:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[10019.874699] [3:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[10019.958431] [6: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa266c0
<6>[10019.958458] [6: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10019.958493] [6:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[10019.958508] [6:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[10019.958524] [6:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work was
cancelled
<6>[10019.959321] [6:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[10019.962709] [6:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 40
00 80 03 01 04 ba 17 82 00 34 00 01 08 00
<6>[10019.962952] [6:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 10
00 80 01 01 04 82 02 01 00 04 00 18 01 00
<6>[10019.984993] [2:SSRM Handler Th: 9082] fts_touch 7-0049: COMMAND : report_
rate
<6>[10019.985035] [2:SSRM Handler Th: 9082] fts_touch 7-0049: cmd = report_rate
<6>[10019.985052] [2:SSRM Handler Th: 9082] fts_touch 7-0049: cmd param 0= 0
<6>[10019.985343] [2:SSRM Handler Th: 9082] fts_touch 7-0049: report_rate: OK
<6>[10019.985981] [2:SSRM Handler Th: 9082] fts_touch 7-0049: tsp cmd: status:0
<6>[10019.986486] [2:SSRM Handler Th: 9082] fts_touch 7-0049: tsp cmd: result:
report_rate,0:OK
<6>[10019.995729] [1:
mc_log: 3354] MobiCore mcd: e01|ccccccccccccccccc
cccccccccTL_TZ_CCM: tciBufferLen = 38912 = 0x9800
<6>[10019.995786] [5:
mc_log: 3354] MobiCore mcd: e01|Trustlet TL_TZ_CC
M: Starting
<6>[10019.995807] [5:
mc_log: 3354] MobiCore mcd: e01|TL_TZ_CCM: tciBuf
ferLen = 38912 = 0x9800
<6>[10019.995822] [5:
mc_log: 3354] MobiCore mcd: e01|TL_TZ_CCM: sendms
g envelope length = 19456 = 0x4c00
<6>[10019.997476] [3:
mc_log: 3354] MobiCore mcd: e01|TL_TZ_CCM: sendms
g = 00092c80, respmsg = 0009785c
<6>[10019.997494] [3:
mc_log: 3354] MobiCore mcd: e01|Trustlet TL_TZ_CC
M: Got a message!
<6>[10019.997509] [3:
mc_log: 3354] MobiCore mcd: e01|TZ_CCM: we got a
command
<6>[10019.997524] [3:
mc_log: 3354] MobiCore mcd: e01|TZ_CCM: process_c
md: CMD_TZ_CCM_C_Initialize:
<6>[10019.997539] [3:
mc_log: 3354] MobiCore mcd: e01|TIMA trustlet: Re
ading knox license status
<6>[10019.998494] [0:
mc_log: 3354] MobiCore mcd: e01|TIMA trustlet: g
et_sec_TIMA_address tima_sec_mem_addr : FE800000
<6>[10020.001218] [4:
mc_log: 3354] MobiCore mcd: 501|drTima: processin
g TIMA_DRIVER_PHYS_MEM_ACCESS_COPY
<6>[10020.001238] [4:
mc_log: 3354] MobiCore mcd: 501|drTima: data_len
= 4 = 0x4
<6>[10020.001251] [4:
mc_log: 3354] MobiCore mcd: 501|drTima: PHYS_READ
<6>[10020.001263] [4:
mc_log: 3354] MobiCore mcd: e01|read license stat
us is: 0
<6>[10020.001275] [4:
mc_log: 3354] MobiCore mcd: e01|low security mode
<6>[10020.005556] [5:
mc_log: 3354] MobiCore mcd: 501|drTima: processin

g TIMA_DRIVER_PHYS_MEM_ACCESS_COPY
<6>[10020.005575] [5:
mc_log: 3354] MobiCore mcd: 501|drTima: data_len
= 32 = 0x20
<6>[10020.005587] [5:
mc_log: 3354] MobiCore mcd: 501|drTima: PHYS_READ
<6>[10020.005600] [5:
mc_log: 3354] MobiCore mcd: e01|TIMA trustlet: wa
rranty violation detected 18
<6>[10020.005612] [5:
mc_log: 3354] MobiCore mcd: e01|TZ_COMMON: Initia
lize failed - tamper fuse set
<6>[10020.005625] [5:
mc_log: 3354] MobiCore mcd: e01|TL_TZ_CCM: TL CCM
general initialization failure
<6>[10020.005637] [5:
mc_log: 3354] MobiCore mcd: e01|Trustlet TL_TZ_CC
M: sendmsg->header.id = 0x00000002
<6>[10020.005650] [5:
mc_log: 3354] MobiCore mcd: e01|Trustlet TL_TZ_CC
M: respmsg->header.id = 0x80000002
<6>[10020.005662] [5:
mc_log: 3354] MobiCore mcd: e01|Trustlet TL_TZ_CC
M: respmsg->header.status = 0x00000000
<6>[10020.005674] [5:
mc_log: 3354] MobiCore mcd: e01|Trustlet TL_TZ_CC
M: Returning = 0x00000000
<6>[10020.006162] [4: MHI_EV_THREAD: 4604] [mhi_process_event_ring] Empty OOB
chan 100
<6>[10020.008906] [5:
mc_log: 3354] MobiCore mcd: 104| SMGNT send MSG_C
LOSE_TRUSTLET for thread e01 to IPCH
<6>[10020.009894] [5:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 202 (UUID=02010000-0000-0000-0000-000000005000) (server 0/8 status i
s 00000001)
<6>[10020.012211] [5:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 302 (UUID=ffffffff-0000-0000-0000-000000000002) (server 1/8 status i
s 00000001)
<6>[10020.014230] [0:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 402 (UUID=ffffffff-0000-0000-0000-000000000001) (server 2/8 status i
s 00000001)
<6>[10020.018891] [6:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 501 (UUID=ffffffff-d000-0000-0000-00000000000a) (server 3/8 status i
s 00000001)
<6>[10020.018915] [6:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 602 (UUID=ffffffff-d000-0000-0000-000000000016) (server 4/8 status i
s 00000001)
<6>[10020.022199] [6:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 702 (UUID=07050500-0000-0000-0000-000000000000) (server 5/8 status i
s 00000001)
<6>[10020.022217] [6:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to b02 (UUID=ffffffff-d000-0000-0000-00000000000e) (server 6/8 status i
s 00000001)
<6>[10020.025421] [6:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 902 (UUID=ffffffff-d000-0000-0000-000000000014) (server 7/8 status i
s 00000001)
<6>[10020.025435] [6:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop do
ne
<6>[10020.025448] [6:
mc_log: 3354] MobiCore mcd: 501|drTima: MSG_CLOSE
_TRUSTLET call 0x40001
<6>[10020.027648] [6:
mc_log: 3354] MobiCore mcd: b02|Driver SPI receiv
es MSG_CLOSE_TRUSTLET[0x00040001, 0x0001000e]
<6>[10020.027664] [6:
mc_log: 3354] MobiCore mcd: 104| SMGNT smgntClose
Session done
<3>[10020.038252] [7:
tlc_server: 5103] MobiCore mcd: closed by PID(5103),
name(tlc_server)
<6>[10020.197229] [7:
mc_log: 3354] MobiCore mcd: d01|FINGERPRINT comma
ndId :c
<6>[10020.199011] [7:
mc_log: 3354] MobiCore mcd: d01|do_extra_control
opcode : 30

<6>[10020.214967] [6:
mc_log: 3354] MobiCore mcd: d01|[FPLOG]vigis_api
: 600
<6>[10020.214988] [6:
mc_log: 3354] MobiCore mcd: d01|SYNAFP: synaFp.c
106 4
<6>[10020.215002] [6:
mc_log: 3354] MobiCore mcd: d01|SYNAFP: vfmDevic
e.c 114 4
<6>[10020.215014] [6:
mc_log: 3354] MobiCore mcd: d01|SYNAFP: scsSenso
rDevice.c 271 4
<6>[10020.215602] [7:
mc_log: 3354] MobiCore mcd: d01|SYNAFP: scsSenso
rDevice.c 164 4
<6>[10020.218869] [6:
mc_log: 3354] MobiCore mcd: b02|[Secure SPI] sec_
spi_exit
<6>[10020.218886] [6:
mc_log: 3354] MobiCore mcd: d01|SYNAFP: vfmDevic
e.c 274 4
<6>[10020.218899] [6:
mc_log: 3354] MobiCore mcd: d01|SYNAFP: vcsImage
.c 263 4
<6>[10020.218910] [6:
mc_log: 3354] MobiCore mcd: d01|SYNAFP: vcsImage
.c 64 3
<6>[10020.218922] [6:
mc_log: 3354] MobiCore mcd: d01|SYNAFP: vcsImage
.c 278 4
<6>[10020.220556] [6:
mc_log: 3354] MobiCore mcd: d01|SYNAFP: vfmDevic
e.c 344 4
<6>[10020.220571] [6:
mc_log: 3354] MobiCore mcd: d01|SYNAFP: vfmDevic
e.c 141 4
<6>[10020.220583] [6:
mc_log: 3354] MobiCore mcd: d01|SYNAFP: vfmInit.
c 177 4
<6>[10020.220594] [6:
mc_log: 3354] MobiCore mcd: d01|SYNAFP: vfmInit.
c 198 4
<6>[10020.239714] [7:
mc_log: 3354] MobiCore mcd: d01|Trustlet Fingerpr
int::Returning 0
<3>[10020.243269] I[6:
swapper/6:
0] [BT] set_wake_locked value = 0
<6>[10020.255584] [4:
mc_log: 3354] MobiCore mcd: 104| SMGNT send MSG_C
LOSE_DRIVER for thread b02 to IPCH
<6>[10020.258869] [7:
mc_log: 3354] MobiCore mcd: b02|Driver SPI receiv
es MSG_CLOSE_DRIVER[0x00040001, 0x00000000]
<6>[10020.258893] [7:
mc_log: 3354] MobiCore mcd: 104| SMGNT send MSG_C
LOSE_TRUSTLET for thread b02 to IPCH
<6>[10020.259467] [4: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10020.259505] [6:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[10020.259523] [6:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[10020.259541] [6:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[10020.259555] [5:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 202 (UUID=02010000-0000-0000-0000-000000005000) (server 0/8 status i
s 00000001)
<6>[10020.259755] [6:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[10020.262191] [5:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 302 (UUID=ffffffff-0000-0000-0000-000000000002) (server 1/8 status i
s 00000001)
<6>[10020.265526] [6:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 402 (UUID=ffffffff-0000-0000-0000-000000000001) (server 2/8 status i
s 00000001)
<6>[10020.265543] [6:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 501 (UUID=ffffffff-d000-0000-0000-00000000000a) (server 3/8 status i
s 00000001)
<6>[10020.268859] [5:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se

nd Event to 602 (UUID=ffffffff-d000-0000-0000-000000000016) (server 4/8 status i


s 00000001)
<6>[10020.272193] [5:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 702 (UUID=07050500-0000-0000-0000-000000000000) (server 5/8 status i
s 00000001)
<6>[10020.272210] [5:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to b02 (UUID=ffffffff-d000-0000-0000-00000000000e) (server 6/8 status i
s 00000000)
<6>[10020.274919] [5:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 902 (UUID=ffffffff-d000-0000-0000-000000000014) (server 7/8 status i
s 00000001)
<6>[10020.274932] [5:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop do
ne
<6>[10020.274944] [5:
mc_log: 3354] MobiCore mcd: 501|drTima: MSG_CLOSE
_TRUSTLET call 0x40001
<6>[10020.276017] [5:
mc_log: 3354] MobiCore mcd: 104| SMGNT smgntClose
Session done
<6>[10020.278894] [7:
mc_log: 3354] MobiCore mcd: 104| SMGNT send MSG_C
LOSE_TRUSTLET for thread d01 to IPCH
<6>[10020.282190] [4:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 202 (UUID=02010000-0000-0000-0000-000000005000) (server 0/7 status i
s 00000001)
<6>[10020.282210] [4:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 302 (UUID=ffffffff-0000-0000-0000-000000000002) (server 1/7 status i
s 00000001)
<6>[10020.283192] [4:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 402 (UUID=ffffffff-0000-0000-0000-000000000001) (server 2/7 status i
s 00000001)
<6>[10020.285627] [6:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 501 (UUID=ffffffff-d000-0000-0000-00000000000a) (server 3/7 status i
s 00000001)
<6>[10020.288872] [6:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 602 (UUID=ffffffff-d000-0000-0000-000000000016) (server 4/7 status i
s 00000001)
<6>[10020.288895] [6:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 702 (UUID=07050500-0000-0000-0000-000000000000) (server 5/7 status i
s 00000001)
<6>[10020.292190] [6:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop se
nd Event to 902 (UUID=ffffffff-d000-0000-0000-000000000014) (server 7/7 status i
s 00000001)
<6>[10020.292203] [6:
mc_log: 3354] MobiCore mcd: 103|BroadCast loop do
ne
<6>[10020.292215] [6:
mc_log: 3354] MobiCore mcd: 501|drTima: MSG_CLOSE
_TRUSTLET call 0x40001
<6>[10020.293755] [6:
mc_log: 3354] MobiCore mcd: 104| SMGNT smgntClose
Session done
<3>[10020.304302] [5: POSIX timer 0: 6378] MobiCore mcd: closed by PID(6378),
name(POSIX timer 0)
<6>[10020.304356] [5: POSIX timer 0: 6378] vfsspi_suspend
<6>[10020.304378] [5: POSIX timer 0: 6378] vfsspi_ioctl_disable_spi_clock DISA
BLE_SPI_CLOCK
<6>[10020.329791] I[1: irq/15-SSP_Int: 1775] [SSP] ssp_sensorhub_list(10): 1, 1,
26, 1, 3, -125, -82, -32, 1, 1
<6>[10020.329969] [7:ssp_sensorhub_t: 1783] wakeup source sensorhub activation
skipped
<6>[10020.330105] I[5:SensorHubServic: 3439] [SSP] ssp_sensorhub_read(10): 1, 1,
26, 1, 3, -125, -82, -32, 1, 1
<6>[10020.385807] [7:
argosd: 3378] argos_pm_qos_notify: name:UFS, spee
d:78Mbps, prev level:-1, request level:0
<6>[10020.393239] [4:
argosd: 3378] argos_freq_lock name:UFS, CPU_MIN=0

, CPU_MAX=0, KFC_MIN=1300000, KFC_MAX=0, MIF=1264000, INT=400000


<6>[10020.395579] [0: thread_hotplug:19286] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[10020.395595] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10020.395606] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10020.909425] [1: irq/15-SSP_Int: 1775] [SSP] [M] PD: W->R
<6>[10020.909425] [1: irq/15-SSP_Int: 1775] save bak odr 0, 1, 20, 20, 0
<6>[10020.909425] [1: irq/15-SSP_Int: 1775] save bak odr 0, 0, 20, 20, 0
<6>[10020.909425] [1: irq/15-SSP_Int: 1775] AD 0 7 1 6, 20
<6>[10020.909425] [1: irq/15-SSP_Int: 1775] save bak odr 0, 1, 20, 20, 0
<6>[10020.909425] [1: irq/15-SSP_Int: 1775] save bak odr 0, 0, 20, 20, 0
<6>[10020.909425] [1: irq/15-SSP_Int: 1775] RM 0 6 1 5 60
<6>[10021.262460] [3: kworker/u16:9:32452] [mhi_initiate_m3] Entered MHI state
4, Pending M0 0 Pending M3 0
<6>[10021.262491] [3: kworker/u16:9:32452] [mhi_initiate_m3] Triggering wake o
ut of M2
<6>[10021.269142] [2: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26700
<6>[10021.269172] [2: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10021.269269] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[10021.269285] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[10021.269300] [1:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[10021.269822] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[10021.269881] [3: kworker/u16:9:32452] [mhi_initiate_m3] Cancelled M1 time
r, timer was active
<6>[10021.269990] [3: kworker/u16:9:32452] [mhi_initiate_m3] Waiting for M3 co
mpletion.
<6>[10021.279380] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10021.279494] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 5
<6>[10021.279511] [1:MHI_STATE_THREA: 4605] [process_M3_transition] Processing
M3 state transition
<6>[10021.279601] [3: kworker/u16:9:32452] [mhi_initiate_m3] M3 completion rec
eived
<6>[10021.279625] [3: kworker/u16:9:32452] [mhi_turn_off_pcie_link] Entered...
<6>[10021.292253] [3: kworker/u16:9:32452] mhi 0000:01:00.0: [debug] pmcsr reg
: b dev->current_state : 0
<6>[10021.292343] [3: kworker/u16:9:32452] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[10021.292409] [3: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: ack mes
sage is ok
<6>[10021.292424] [3: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: receive
d Enter_L23_READY DLLP packet
<6>[10021.292445] [3: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[10021.292525] [3: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[10021.322501] [3: kworker/u16:9:32452] [mhi_turn_off_pcie_link] Exited...
<6>[10021.394594] [0:
argosd: 3378] argos_pm_qos_notify: name:UFS, spee
d:0Mbps, prev level:0, request level:-1
<6>[10021.404781] [1:
argosd: 3378] argos_freq_unlock name:UFS
<6>[10021.629467] [1: irq/15-SSP_Int: 1775] [SSP] [M] AR-0,1412,6522,4773,180,2
0,0,0
<6>[10021.778019] I[0:
swapper/0:
0] exynos-pcie 10ee0000.pcie0: cp2ap_w
ake irq involked

<6>[10021.778155] [0:
kworker/0:0:13589] exynos-pcie 10ee0000.pcie0: PCIe: W
ake work for RC0
<6>[10021.778213] [0:
kworker/0:0:13589] exynos-pcie 10ee0000.pcie0: Callbac
k for the event : 4
<6>[10021.778256] [0:
kworker/0:0:13589] [mhi_link_state_cb] Received MSM_PC
IE_EVENT_WAKE
<6>[10021.778552] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 10
<6>[10021.778605] [1:MHI_STATE_THREA: 4605] [process_WAKE_transition] Entered
<6>[10021.778652] [1:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[10021.778704] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, start of poweron, pcie state: 0
<6>[10021.816508] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: D state
: 0, 6b7e00
<6>[10021.832497] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_reset: Link up : 0x0372d311
<6>[10021.832999] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, end of poweron, pcie state: 3
<6>[10021.845900] [1:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] pmcsr reg
: 8 dev->current_state : 3
<6>[10021.846069] [1:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[10021.846096] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
y for the link of RC0
<6>[10021.846117] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
config space of RC0 and its EP
<6>[10021.846136] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
RC0
<6>[10021.846187] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
EP of RC0
<6>[10021.846538] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Refresh
ing the saved config space in PCI framework for RC0 and its EP
<6>[10021.852488] [1:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[10021.852528] [1:MHI_STATE_THREA: 4605] [process_WAKE_transition] MHI is in
itialized, transitioning to M0.
<6>[10021.852551] [1:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Entered MHI state
5, Pending M0 0 Pending M3 0
<6>[10021.852573] [1:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Waiting for M0 M1
or M3. Currently 5...
<6>[10021.852594] [1:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Wait complete sta
te: 5
<6>[10021.852613] [1:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[10021.852631] [1:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[10021.852650] [1:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Setting M0 ...
<6>[10021.853002] [1:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Exited...
<6>[10021.853021] [1:MHI_STATE_THREA: 4605] [process_WAKE_transition] Exited.
<6>[10021.854361] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 5 link 1, ring type 2, index 0 db 0x5fa26720
<6>[10021.854401] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10021.854569] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[10021.854598] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[10021.854619] [1:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[10021.855943] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[10021.859321] [2:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 bb 17 51 00 0e 00 14 06 00
<6>[10021.864517] [2:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 a5 19 4f 00 00 00

<6>[10021.864944] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [P] tID:0 tc:1 tm


:0
<6>[10021.871252] [5:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 a5 19 4f 00 15 00 02 04 00
<6>[10021.895561] [0: thread_hotplug:19286] frequency info : 800000, prev_cmd 0
, exe_cmd 4
<6>[10021.895594] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10021.895612] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10021.991830] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [R] tID:0 mc: 10
tc:0 Ver[005683000]
<6>[10022.079402] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10022.079556] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[10022.079576] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[10022.079598] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[10022.079794] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[10022.095600] [0: thread_hotplug:19286] frequency info : 1200000, prev_cmd
0, exe_cmd 4
<6>[10022.095627] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10022.095640] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10022.223849] [2:wl_event_handle: 5324] CFG80211-TRACE) wl_escan_handler :
SCAN COMPLETED: scanned AP count=81
<4>[10022.289831] [2: wpa_supplicant: 5196] dhd_wl_ioctl: WLC_IOCTL: cmd: 23, N
OT ASSOCIATED
<6>[10022.319671] [3: wpa_supplicant: 5196] CFG80211-INFO2) wl_cfg80211_connect
: Connectting withf4:f5:fc channel (104) ssid "GRI", len (3)
<6>[10022.319671] [3: wpa_supplicant: 5196]
<6>[10022.781836] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26770
<6>[10022.781912] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10022.782296] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[10022.782365] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[10022.782412] [0:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work was
cancelled
<6>[10022.786183] [1:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 bc 17 51 00 0e 00 14 06 00
<6>[10022.787384] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[10022.788142] [2:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 a6 19 4f 00 00 00
<6>[10022.795762] [1:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 a6 19 4f 00 15 00 02 04 00
<6>[10023.004824] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10023.005104] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[10023.005158] [0:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[10023.005216] [0:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[10023.005450] [0:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[10023.781280] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring

DB state 4 link 1, ring type 2, index 0 db 0x5fa267c0


<6>[10023.781358] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10023.781593] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[10023.781646] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[10023.781692] [1:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work was
cancelled
<6>[10023.785243] [2:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 bd 17 51 00 0e 00 14 06 00
<6>[10023.785359] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[10023.787457] [3:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 a7 19 4f 00 00 00
<6>[10023.793965] [2:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 a7 19 4f 00 15 00 02 04 00
<6>[10023.942380] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [P] tID:0 tc:1 tm
:0
<6>[10023.995564] [0: thread_hotplug:19286] frequency info : 800000, prev_cmd 0
, exe_cmd 4
<6>[10023.995597] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10023.995615] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10024.002427] [5: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10024.002471] [5:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[10024.002488] [5:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[10024.002509] [5:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[10024.002703] [5:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[10024.023251] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [R] tID:0 mc: 6 t
c:0 Ver[005683000]
<6>[10024.095668] [0: thread_hotplug:19286] frequency info : 1200000, prev_cmd
0, exe_cmd 4
<6>[10024.095694] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10024.095706] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10024.806623] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [P] tID:0 tc:1 tm
:0
<6>[10024.895562] [0: thread_hotplug:19286] frequency info : 800000, prev_cmd 0
, exe_cmd 4
<6>[10024.895596] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10024.895615] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10024.995563] [0: thread_hotplug:19286] frequency info : 1200000, prev_cmd
0, exe_cmd 4
<6>[10024.995589] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10024.995602] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10025.005881] [2: kworker/u16:9:32452] [mhi_initiate_m3] Entered MHI state
4, Pending M0 0 Pending M3 0
<6>[10025.005914] [2: kworker/u16:9:32452] [mhi_initiate_m3] Triggering wake o
ut of M2
<6>[10025.012567] [1: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26810
<6>[10025.012598] [1: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10025.012638] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni

ng to 2
<6>[10025.012654] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[10025.012670] [1:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[10025.013254] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[10025.013271] [0: kworker/u16:9:32452] [mhi_initiate_m3] Cancelled M1 time
r, timer was active
<6>[10025.013422] [0: kworker/u16:9:32452] [mhi_initiate_m3] Waiting for M3 co
mpletion.
<6>[10025.022896] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10025.022946] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 5
<6>[10025.022963] [1:MHI_STATE_THREA: 4605] [process_M3_transition] Processing
M3 state transition
<6>[10025.023010] [0: kworker/u16:9:32452] [mhi_initiate_m3] M3 completion rec
eived
<6>[10025.023038] [0: kworker/u16:9:32452] [mhi_turn_off_pcie_link] Entered...
<6>[10025.035682] [0: kworker/u16:9:32452] mhi 0000:01:00.0: [debug] pmcsr reg
: b dev->current_state : 0
<6>[10025.035815] [0: kworker/u16:9:32452] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[10025.035891] [0: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: ack mes
sage is ok
<6>[10025.035908] [0: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: receive
d Enter_L23_READY DLLP packet
<6>[10025.035931] [0: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[10025.036030] [0: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[10025.054089] [3:wl_event_handle: 5324] CFG80211-INFO2) wl_get_auth_assoc_s
tatus : event=3 status 0 reason 0
<6>[10025.054126] [3:wl_event_handle: 5324] CFG80211-INFO2) wl_get_auth_assoc_s
tatus : event=7 status 0 reason 0
<6>[10025.054144] [3:wl_event_handle: 5324] CFG80211-INFO2) wl_notify_connect_s
tatus : wl_bss_connect_done succeeded with f4:f5:fc
<4>[10025.057991] [3:wl_event_handle: 5324] dhd_prot_ioctl: SET PM to 0
<4>[10025.059228] [1: kworker/u16:1:32448] regulatory is not upadted via queue
_regulatory_request.
<4>[10025.063362] I[0: kworker/u16:9:32452] ETHER_TYPE_802_1X [RX] : M1 of 4way
<6>[10025.069775] [0: kworker/u16:9:32452] [mhi_turn_off_pcie_link] Exited...
<4>[10025.073073] I[3: wpa_supplicant: 5196] ETHER_TYPE_802_1X [TX] : M2 of 4way
<4>[10025.073114] I[3: wpa_supplicant: 5196] setting flowring status to pending
from 2
<4>[10025.073153] I[3: wpa_supplicant: 5196] dhd_prot_flow_ring_create Send Flow
create Req msglen flow ID 41 for peer f4:f5:fc prio 7 ifindex 0
<4>[10025.073453] I[0:
swapper/0:
0] dhd_prot_process_flow_ring_create_r
esponse Flow create Response status = 0 Flow 41
<4>[10025.079363] I[0: RenderThread:16648] ETHER_TYPE_802_1X [RX] : M3 of 4way
<4>[10025.082925] I[2: wpa_supplicant: 5196] ETHER_TYPE_802_1X [TX] : M4 of 4way
<6>[10025.086143] [3: wpa_supplicant: 5196] IPv6: ADDRCONF(NETDEV_CHANGE): wlan
0: link becomes ready
<6>[10025.086523] [3: wpa_supplicant: 5196] rtmsg : wlan0[1003]
<6>[10025.090080] [3: wpa_supplicant: 5196] CFG80211-TRACE) __wl_cfg80211_scan
: START SCAN
<3>[10025.091478] [2:DnsConfigServic: 6258] [RMNET:HI] rmnet_vnd_ioctl(): Unkow
n IOCTL 0x00008B01
<3>[10025.093312] [0:DnsConfigServic: 9744] [RMNET:HI] rmnet_vnd_ioctl(): Unkow
n IOCTL 0x00008B01
<2>[10025.123914] [2:
netd: 4798] IPv6: ipv6_generate_eui64: dev type

: 1
<3>[10025.124471] [0:DnsConfigServic: 9744] [RMNET:HI] rmnet_vnd_ioctl(): Unkow
n IOCTL 0x00008B01
<4>[10025.125688] I[2:WifiStateMachin: 5163] setting flowring status to pending
from 2
<4>[10025.125742] I[2:WifiStateMachin: 5163] dhd_prot_flow_ring_create Send Flow
create Req msglen flow ID 40 for peer 33:35:ba prio 0 ifindex 0
<4>[10025.126576] I[0:
ksoftirqd/0:
3] dhd_prot_process_flow_ring_create_r
esponse Flow create Response status = 0 Flow 40
<3>[10025.134055] [2:DnsConfigServic: 6258] [RMNET:HI] rmnet_vnd_ioctl(): Unkow
n IOCTL 0x00008B01
<4>[10025.155676] I[0: mali-renderer:16665] setting flowring status to pending
from 2
<4>[10025.155728] I[0: mali-renderer:16665] dhd_prot_flow_ring_create Send Flow
create Req msglen flow ID 39 for peer 01:ff:fa prio 3 ifindex 0
<4>[10025.156508] I[0:
ksoftirqd/0:
3] dhd_prot_process_flow_ring_create_r
esponse Flow create Response status = 0 Flow 39
<6>[10025.199917] [2: wpa_supplicant: 5196] CFG80211-TRACE) wl_cfg80211_set_btc
oex_dhcp : DHCP session starts
<6>[10025.214971] [2:wl_event_handle: 5324] CFG80211-INFO2) wl_notify_connect_s
tatus : wl_bss_connect_done succeeded with f4:f5:fc
<6>[10025.289754] [0: wpa_supplicant: 5196] [dhd] dhd_suspend_resume_helper
<6>[10025.289781] [0: wpa_supplicant: 5196] [dhd] dhd_set_suspend
<4>[10025.289791] [0: wpa_supplicant: 5196] dhd_set_suspend: Remove extra suspe
nd setting
<6>[10025.289806] [0: wpa_supplicant: 5196] [dhd] resume power_mode: 2
<4>[10025.289818] [0: wpa_supplicant: 5196] dhd_prot_ioctl: SET PM to 2
<4>[10025.290888] [0: wpa_supplicant: 5196] dhd_enable_packet_filter: enter, va
lue = 0
<6>[10025.297522] [0: wpa_supplicant: 5196] [dhd] resume bcn_li_dtim: 0
<6>[10025.299157] [0: thread_hotplug:19286] frequency info : 1500000, prev_cmd
4, exe_cmd 0
<6>[10025.299177] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10025.299188] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<4>[10025.303219] [0: wpa_supplicant: 5196] dhd_prot_ioctl: SET PM to 192
<4>[10025.303613] [0: wpa_supplicant: 5196] dhd_wl_ioctl: WLC_IOCTL: cmd: 86, r
et = -1
<6>[10025.303628] [0: wpa_supplicant: 5196] CFG80211-INFO2) wl_cfg80211_set_pow
er_mgmt : error (-1)
<6>[10025.398882] [0: thread_hotplug:19286] frequency info : 1200000, prev_cmd
0, exe_cmd 4
<6>[10025.398907] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10025.398919] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<4>[10025.472635] I[2:
dhcpcd:19374] DHCP - DISCOVER [TX]
<4>[10025.479318] I[0:
swapper/0:
0] DHCP - OFFER [RX]
<4>[10025.480190] I[2:
dhcpcd:19374] DHCP - REQUEST [TX]
<4>[10025.581586] I[0:
swapper/0:
0] DHCP - ACK [RX]
<6>[10025.600567] [2: kworker/u16:9:32452] [VIB] haptic_work
<6>[10025.603106] [0: kworker/u16:9:32452] [VIB] haptic_work
<6>[10025.603133] [0: kworker/u16:9:32452] [VIB] max77843_haptic_i2c 1
<6>[10025.605309] [0: kworker/u16:9:32452] regulator_enable returns 0
<6>[10025.610170] [0: kworker/u16:9:32452] [VIB] haptic_work
<6>[10025.610652] [0: kworker/u16:9:32452] [VIB] max77843_haptic_i2c 0
<3>[10025.616850] [2:DnsConfigServic: 6258] [RMNET:HI] rmnet_vnd_ioctl(): Unkow
n IOCTL 0x00008B01
<3>[10025.619569] [0:DnsConfigServic: 9744] [RMNET:HI] rmnet_vnd_ioctl(): Unkow
n IOCTL 0x00008B01
<3>[10025.650379] I[1:
netd:19402] [rmnet_mhi0][t] - PKT skb->len=68 s

kb->head=ffffffc0054a4400 skb->data=ffffffc0054a441c
<3>[10025.650403] I[1:
netd:19402] [rmnet_mhi0][t] - PKT len: 68, prin
ting first 16 bytes
<3>[10025.650416] I[1:
netd:19402] [rmnet_mhi0][t] - PKT
<3>[10025.650436] I[1:
netd:19402] [rmnet_mhi0][t] - PKT0000: 00 01 00
40 45 00 00 40 b1 f8 40 00 40 11 a7 37
<6>[10025.650453] I[1:
netd:19402] [rmnet_mhi_xmit] [TX] len 82, type
0x1ada
<6>[10025.650475] I[1:
netd:19402] [TX] 00 01 00 40 45 00 00 40 b1 f8
40 00 40 11 a7 37
<6>[10025.650513] I[1:
netd:19402] [mhi_wake_dev_from_m3] Initiating M
0 work...
<6>[10025.650582] [0: kworker/u16:9:32452] [m0_work] No pending resume, initia
ting M0.
<6>[10025.650603] [0: kworker/u16:9:32452] [mhi_initiate_m0] Entered MHI state
5, Pending M0 0 Pending M3 0
<6>[10025.650619] [0: kworker/u16:9:32452] [mhi_initiate_m0] Waiting for M0 M1
or M3. Currently 5...
<6>[10025.650635] [0: kworker/u16:9:32452] [mhi_initiate_m0] Wait complete sta
te: 5
<6>[10025.650650] [0: kworker/u16:9:32452] [mhi_turn_on_pcie_link] Entered...
<6>[10025.650673] [0: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, start of poweron, pcie state: 0
<6>[10025.689316] [0: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: D state
: 0, 336200
<6>[10025.705417] [3: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: exynos_
pcie_reset: Link up : 0x0308b211
<6>[10025.705837] [3: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, end of poweron, pcie state: 3
<6>[10025.719131] [0: kworker/u16:9:32452] mhi 0000:01:00.0: [debug] pmcsr reg
: 8 dev->current_state : 3
<6>[10025.719299] [0: kworker/u16:9:32452] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[10025.719319] [0: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: Recover
y for the link of RC0
<6>[10025.719335] [0: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: Recover
config space of RC0 and its EP
<6>[10025.719350] [0: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: Recover
RC0
<6>[10025.719393] [0: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: Recover
EP of RC0
<6>[10025.719760] [0: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: Refresh
ing the saved config space in PCI framework for RC0 and its EP
<6>[10025.725249] [0: kworker/u16:9:32452] [mhi_turn_on_pcie_link] Exited...
<6>[10025.725284] [0: kworker/u16:9:32452] [mhi_initiate_m0] Setting M0 ...
<6>[10025.725391] [0: kworker/u16:9:32452] [mhi_initiate_m0] Exited...
<6>[10025.727176] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 5 link 1, ring type 2, index 0 db 0x5fa26830
<6>[10025.727206] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10025.727247] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[10025.727265] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[10025.727281] [1:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[10025.727821] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[10025.736722] [0: MHI_EV_THREAD: 4604] [rmnet_mhi_tx_cb] [TX_CB] len 82, t
ype 0x1ada
<6>[10025.736754] [0: MHI_EV_THREAD: 4604] [TX_CB] 00 01 00 40 45 00 00 40 b1
f8 40 00 40 11 a7 37

<6>[10025.736798] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] Empty OOB


chan 100
<6>[10025.757519] [1: irq/15-SSP_Int: 1775] [SSP] [M] AR-0,1481,6590,4643,180,2
0,0,0
<6>[10025.785975] I[3: RenderThread:16648] [rmnet_mhi_poll] [RX] len 226, type
0x1ada
<6>[10025.786004] I[3: RenderThread:16648] [RX] 00 01 00 d0 45 00 00 d0 34 f8
00 00 3d 11 66 a8
<3>[10025.786084] I[0:
kswapd0: 1027] [rmnet_mhi0][r] - PKT skb->len=212
skb->head=ffffffc00c13b000 skb->data=ffffffc00c13b040
<3>[10025.786102] I[0:
kswapd0: 1027] [rmnet_mhi0][r] - PKT len: 212, pri
nting first 16 bytes
<3>[10025.786115] I[0:
kswapd0: 1027] [rmnet_mhi0][r] - PKT
<3>[10025.786135] I[0:
kswapd0: 1027] [rmnet_mhi0][r] - PKT0000: 00 01 00
d0 45 00 00 d0 34 f8 00 00 3d 11 66 a8
<6>[10025.798380] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] Empty OOB
chan 100
<6>[10025.834422] [2: MHI_EV_THREAD: 4604] [mhi_process_event_ring] Empty OOB
chan 100
<6>[10025.893980] [2: MHI_EV_THREAD: 4604] [mhi_process_event_ring] Empty OOB
chan 100
<6>[10025.920856] [2: MHI_EV_THREAD: 4604] [mhi_process_event_ring] Empty OOB
chan 100
<6>[10026.009311] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [R] tID:0 mc: 53
tc:0 Ver[005683000]
<6>[10026.042633] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] Empty OOB
chan 100
<6>[10026.079723] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] Empty OOB
chan 100
<6>[10026.100238] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] Empty OOB
chan 100
<6>[10026.113074] [2: wpa_supplicant: 5196] CFG80211-TRACE) wl_cfg80211_set_btc
oex_dhcp : DHCP is complete
<3>[10026.129860] [2:DnsConfigServic: 9744] [RMNET:HI] rmnet_vnd_ioctl(): Unkow
n IOCTL 0x00008B01
<3>[10026.130619] [2:DnsConfigServic: 6258] [RMNET:HI] rmnet_vnd_ioctl(): Unkow
n IOCTL 0x00008B01
<6>[10026.154033] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] Empty OOB
chan 100
<6>[10026.362194] [1: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10026.362289] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[10026.362308] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[10026.362328] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[10026.362524] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[10026.416722] [3:
argosd: 3378] argos_pm_qos_notify: name:UFS, spee
d:262Mbps, prev level:-1, request level:0
<6>[10026.424096] [3:
argosd: 3378] argos_freq_lock name:UFS, CPU_MIN=0
, CPU_MAX=0, KFC_MIN=1300000, KFC_MAX=0, MIF=1264000, INT=400000
<6>[10026.512218] [0: thread_hotplug:19286] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[10026.512239] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10026.512251] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10026.524592] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26850

<6>[10026.524618] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re


ceived ring 0x0
<6>[10026.524713] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[10026.524729] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[10026.524744] [2:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work was
cancelled
<6>[10026.525216] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[10026.528945] [2:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 be 17 51 00 0e 00 14 06 00
<6>[10026.531140] [1:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 a8 19 4f 00 00 00
<6>[10026.536665] [0:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 a8 19 4f 00 15 00 02 04 00
<6>[10026.623322] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] Empty OOB
chan 100
<6>[10026.668260] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] Empty OOB
chan 100
<6>[10026.782694] [0:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 bf 17 51 00 0e 00 14 06 00
<6>[10026.783616] [2:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 a9 19 4f 00 00 00
<6>[10026.794982] [0:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 a9 19 4f 00 15 00 02 04 00
<6>[10026.841277] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [P] tID:0 tc:1 tm
:0
<6>[10026.912227] [0: thread_hotplug:19286] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[10026.912248] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10026.912259] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<4>[10026.917225] [1: wpa_supplicant: 5196] net_os_enable_packet_filter: val =
0
<4>[10026.917550] [5: wpa_supplicant: 5196] net_os_rxfilter_add_remove: add_rem
ove = 1, num = 2
<4>[10026.918912] [5: wpa_supplicant: 5196] net_os_enable_packet_filter: val =
1
<6>[10026.948489] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [R] tID:0 mc: 8 t
c:0 Ver[005683000]
<6>[10027.003682] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10027.003806] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[10027.003825] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[10027.003846] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[10027.004038] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[10027.426364] [3:
argosd: 3378] argos_pm_qos_notify: name:UFS, spee
d:57Mbps, prev level:0, request level:-1
<6>[10027.429119] [3:
argosd: 3378] argos_freq_unlock name:UFS
<6>[10027.515987] [0: thread_hotplug:19286] frequency info : 500000, prev_cmd 0
, exe_cmd 4
<6>[10027.516088] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10027.516196] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10027.786737] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa268d0
<6>[10027.786812] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re

ceived ring 0x0


<6>[10027.787068] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[10027.787121] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[10027.787167] [2:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work was
cancelled
<6>[10027.791705] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[10027.791764] [0:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 c0 17 51 00 0e 00 14 06 00
<6>[10027.796452] [2:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 aa 19 4f 00 00 00
<6>[10027.799911] [0:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 aa 19 4f 00 15 00 02 04 00
<6>[10027.885856] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [P] tID:0 tc:1 tm
:0
<3>[10027.911529] I[7:
netd:19482] [rmnet_mhi0][t] - PKT skb->len=80 s
kb->head=ffffffc002f4ae00 skb->data=ffffffc002f4ae1c
<3>[10027.911551] I[7:
netd:19482] [rmnet_mhi0][t] - PKT len: 80, prin
ting first 16 bytes
<3>[10027.911564] I[7:
netd:19482] [rmnet_mhi0][t] - PKT
<3>[10027.911581] I[7:
netd:19482] [rmnet_mhi0][t] - PKT0000: 03 01 00
4c 45 00 00 49 b3 f5 40 00 40 11 a5 31
<6>[10027.911597] I[7:
netd:19482] [rmnet_mhi_xmit] [TX] len 94, type
0x1ada
<6>[10027.911618] I[7:
netd:19482] [TX] 03 01 00 4c 45 00 00 49 b3 f5
40 00 40 11 a5 31
<6>[10027.918208] [4: MHI_EV_THREAD: 4604] [rmnet_mhi_tx_cb] [TX_CB] len 94, t
ype 0x1ada
<6>[10027.918235] [4: MHI_EV_THREAD: 4604] [TX_CB] 03 01 00 4c 45 00 00 49 b3
f5 40 00 40 11 a5 31
<6>[10027.918270] [4: MHI_EV_THREAD: 4604] [mhi_process_event_ring] Empty OOB
chan 100
<6>[10027.918874] [0: thread_hotplug:19286] frequency info : 800000, prev_cmd 0
, exe_cmd 4
<6>[10027.918902] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10027.918921] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10027.956081] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [R] tID:0 mc: 5 t
c:0 Ver[005683000]
<6>[10028.118934] [0: thread_hotplug:19286] frequency info : 1200000, prev_cmd
0, exe_cmd 4
<6>[10028.118959] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10028.118972] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10028.127128] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10028.127229] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[10028.127253] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[10028.127278] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[10028.127475] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[10028.315589] [1: kworker/u16:9:32452] vfsspi_work_func_debug ldo: 3, slee
p: 0, irq: 0, tz: 1, type: viper
<6>[10028.338943] [1: kworker/u16:9:32452] [SSP] debug_work_func: (77) - Senso
r state: 0x1fc3febf, RC: 1, CC: 0 DC: 0 TC: 0
<6>[10028.338970] [1: kworker/u16:9:32452] [SSP] 0 : 1090, 7093, 4196 (200ms,
0ms)

<6>[10028.338986] [1: kworker/u16:9:32452] [SSP] 9 : 39, 32, 37, 103, 245, 3 (


200ms)
<6>[10028.339000] [1: kworker/u16:9:32452] [SSP] 13 : 1(1ms)
<4>[10028.451680] I[0:
swapper/0:
0] DHCP - REQUEST [RX]
<6>[10028.625751] [0: thread_hotplug:19286] frequency info : 400000, prev_cmd 0
, exe_cmd 4
<6>[10028.625814] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10028.625852] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10028.792910] [0:wl_event_handle: 5324] CFG80211-TRACE) wl_escan_handler :
SCAN COMPLETED: scanned AP count=62
<6>[10029.128921] [3: kworker/u16:9:32452] [mhi_initiate_m3] Entered MHI state
4, Pending M0 0 Pending M3 0
<6>[10029.128964] [3: kworker/u16:9:32452] [mhi_initiate_m3] Triggering wake o
ut of M2
<6>[10029.135304] [1: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26920
<6>[10029.135344] [1: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10029.136844] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[10029.136883] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[10029.136906] [2:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[10029.137578] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[10029.137697] [0: kworker/u16:9:32452] [mhi_initiate_m3] Cancelled M1 time
r, timer was active
<6>[10029.137741] [0: kworker/u16:9:32452] [mhi_initiate_m3] Waiting for M3 co
mpletion.
<6>[10029.145606] [1: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10029.145808] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 5
<6>[10029.145837] [2:MHI_STATE_THREA: 4605] [process_M3_transition] Processing
M3 state transition
<6>[10029.145915] [2: kworker/u16:9:32452] [mhi_initiate_m3] M3 completion rec
eived
<6>[10029.145948] [2: kworker/u16:9:32452] [mhi_turn_off_pcie_link] Entered...
<6>[10029.146005] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [P] tID:0 tc:1 tm
:0
<6>[10029.159049] [2: kworker/u16:9:32452] mhi 0000:01:00.0: [debug] pmcsr reg
: b dev->current_state : 0
<6>[10029.159200] [2: kworker/u16:9:32452] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[10029.159285] [2: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: ack mes
sage is ok
<6>[10029.159306] [2: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: receive
d Enter_L23_READY DLLP packet
<6>[10029.159334] [2: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[10029.159448] [2: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[10029.189382] [5: kworker/u16:9:32452] [mhi_turn_off_pcie_link] Exited...
<6>[10029.228951] [0: thread_hotplug:19286] frequency info : 800000, prev_cmd 0
, exe_cmd 4
<6>[10029.228997] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10029.229027] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10029.252567] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [R] tID:0 mc: 7 t
c:0 Ver[005683000]

<6>[10029.328965] [0: thread_hotplug:19286] frequency info : 1200000, prev_cmd


0, exe_cmd 4
<6>[10029.328991] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10029.329004] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10029.431718] [0:
argosd: 3378] argos_pm_qos_notify: name:UFS, spee
d:246Mbps, prev level:-1, request level:0
<6>[10029.441985] [2:
argosd: 3378] argos_freq_lock name:UFS, CPU_MIN=0
, CPU_MAX=0, KFC_MIN=1300000, KFC_MAX=0, MIF=1264000, INT=400000
<6>[10029.529013] [0: thread_hotplug:19286] frequency info : 1400000, prev_cmd
0, exe_cmd 4
<6>[10029.529102] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10029.529115] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10029.708099] [1: irq/15-SSP_Int: 1775] [SSP] [M] AR-0,1321,6858,4399,180,2
0,0,0
<6>[10029.782135] I[0:
Handler-4:16747] exynos-pcie 10ee0000.pcie0: cp2ap_w
ake irq involked
<6>[10029.782237] [0:
kworker/0:1:25228] exynos-pcie 10ee0000.pcie0: PCIe: W
ake work for RC0
<6>[10029.782258] [0:
kworker/0:1:25228] exynos-pcie 10ee0000.pcie0: Callbac
k for the event : 4
<6>[10029.782271] [0:
kworker/0:1:25228] [mhi_link_state_cb] Received MSM_PC
IE_EVENT_WAKE
<6>[10029.782320] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 10
<6>[10029.782337] [1:MHI_STATE_THREA: 4605] [process_WAKE_transition] Entered
<6>[10029.782351] [1:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[10029.782368] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, start of poweron, pcie state: 0
<6>[10029.822620] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: D state
: 0, b2f200
<6>[10029.838151] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_reset: Link up : 0x030d9d11
<6>[10029.838400] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, end of poweron, pcie state: 3
<6>[10029.849111] [2:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] pmcsr reg
: 8 dev->current_state : 3
<6>[10029.849281] [2:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[10029.849299] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
y for the link of RC0
<6>[10029.849313] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
config space of RC0 and its EP
<6>[10029.849327] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
RC0
<6>[10029.849358] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
EP of RC0
<6>[10029.849733] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Refresh
ing the saved config space in PCI framework for RC0 and its EP
<6>[10029.854965] [2:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[10029.854990] [2:MHI_STATE_THREA: 4605] [process_WAKE_transition] MHI is in
itialized, transitioning to M0.
<6>[10029.855006] [2:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Entered MHI state
5, Pending M0 0 Pending M3 0
<6>[10029.855020] [2:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Waiting for M0 M1
or M3. Currently 5...
<6>[10029.855034] [2:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Wait complete sta
te: 5
<6>[10029.855047] [2:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...

<6>[10029.855060] [2:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...


<6>[10029.855073] [2:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Setting M0 ...
<6>[10029.855103] [2:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Exited...
<6>[10029.855116] [2:MHI_STATE_THREA: 4605] [process_WAKE_transition] Exited.
<6>[10029.857420] [1: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 5 link 1, ring type 2, index 0 db 0x5fa26940
<6>[10029.857445] [1: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10029.857482] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[10029.857497] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[10029.857511] [1:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[10029.858369] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[10029.861391] [1:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 c1 17 51 00 0e 00 14 06 00
<6>[10029.862621] [2:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 ab 19 4f 00 00 00
<6>[10029.869454] [1:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 ab 19 4f 00 15 00 02 04 00
<4>[10029.913979] I[0:
Thread-407: 8691] DHCP - 0x108 [RX]
<6>[10029.959040] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] Empty OOB
chan 100
<6>[10030.208071] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10030.208200] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[10030.208218] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[10030.208236] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[10030.208429] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[10030.308750] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [P] tID:0 tc:1 tm
:0
<6>[10030.328861] [0: thread_hotplug:19286] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[10030.328881] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10030.328893] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10030.391712] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [R] tID:0 mc: 6 t
c:0 Ver[005683000]
<6>[10030.528878] [0: thread_hotplug:19286] frequency info : 1500000, prev_cmd
4, exe_cmd 0
<6>[10030.528897] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10030.528907] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10030.628926] [0: thread_hotplug:19286] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[10030.628948] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10030.628959] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10030.787088] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26990
<6>[10030.787114] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10030.787147] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[10030.787169] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[10030.787184] [1:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work was

cancelled
<6>[10030.787762] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[10030.791261] [1:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 c2 17 51 00 0e 00 14 06 00
<6>[10030.792808] [3:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 ac 19 4f 00 00 00
<6>[10030.805177] [0:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 ac 19 4f 00 15 00 02 04 00
<6>[10031.013802] [2: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10031.013850] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[10031.013869] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[10031.013889] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[10031.014083] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[10031.362239] [0: kworker/0:2H:23569] HOME key is pressed
<6>[10031.532199] [0: thread_hotplug:19286] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[10031.532220] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10031.532232] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10031.724799] [4:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 ad 19 43 00 00 00
<6>[10031.731297] [6: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa269e0
<6>[10031.731317] [6: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10031.731340] [6:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[10031.731351] [6:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[10031.731360] [6:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work was
cancelled
<6>[10031.731835] [6:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[10031.732187] [0: thread_hotplug:19286] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[10031.732206] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10031.732217] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10031.741378] [7:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 9f
00 80 03 01 02 ad 19 43 00 93 00 02 04 00
<6>[10031.840149] [1: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10031.840221] [6:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[10031.840235] [6:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[10031.840249] [6:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[10031.840436] [6:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[10032.232192] [0: thread_hotplug:19286] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[10032.232212] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10032.232224] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10032.445943] [4:
argosd: 3378] argos_pm_qos_notify: name:UFS, spee
d:15Mbps, prev level:0, request level:-1

<6>[10032.447235] [4:
argosd: 3378] argos_freq_unlock name:UFS
<6>[10032.532446] [0: thread_hotplug:19286] frequency info : 400000, prev_cmd 0
, exe_cmd 4
<6>[10032.532532] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10032.532573] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10032.637525] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [P] tID:0 tc:1 tm
:0
<6>[10032.732580] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [R] tID:0 mc: 7 t
c:0 Ver[005683000]
<6>[10032.735586] [0: thread_hotplug:19286] frequency info : 800000, prev_cmd 0
, exe_cmd 4
<6>[10032.735619] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10032.735638] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10032.748512] [6: kworker/u16:1:32448] [VIB] haptic_work
<6>[10032.750311] [6: kworker/u16:1:32448] [VIB] haptic_work
<6>[10032.750331] [6: kworker/u16:1:32448] [VIB] max77843_haptic_i2c 1
<6>[10032.752706] [7: kworker/u16:1:32448] regulator_enable returns 0
<6>[10032.757327] [7: kworker/u16:1:32448] [VIB] haptic_work
<6>[10032.757930] [1: kworker/u16:1:32448] [VIB] max77843_haptic_i2c 0
<6>[10032.835682] [0: thread_hotplug:19286] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[10032.835706] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10032.835718] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10032.842541] [0: kworker/u16:1:32448] [mhi_initiate_m3] Entered MHI state
4, Pending M0 0 Pending M3 0
<6>[10032.842572] [0: kworker/u16:1:32448] [mhi_initiate_m3] Triggering wake o
ut of M2
<6>[10032.849199] [0: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26a20
<6>[10032.849228] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10032.849270] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[10032.849285] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[10032.849300] [0:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[10032.849889] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[10032.850006] [2: kworker/u16:1:32448] [mhi_initiate_m3] Cancelled M1 time
r, timer was active
<6>[10032.850044] [2: kworker/u16:1:32448] [mhi_initiate_m3] Waiting for M3 co
mpletion.
<6>[10032.859437] [2: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10032.859512] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 5
<6>[10032.859528] [2:MHI_STATE_THREA: 4605] [process_M3_transition] Processing
M3 state transition
<6>[10032.859558] [2: kworker/u16:1:32448] [mhi_initiate_m3] M3 completion rec
eived
<6>[10032.859582] [2: kworker/u16:1:32448] [mhi_turn_off_pcie_link] Entered...
<6>[10032.872342] [2: kworker/u16:1:32448] mhi 0000:01:00.0: [debug] pmcsr reg
: b dev->current_state : 0
<6>[10032.872479] [2: kworker/u16:1:32448] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[10032.872556] [2: kworker/u16:1:32448] exynos-pcie 10ee0000.pcie0: ack mes
sage is ok
<6>[10032.872571] [2: kworker/u16:1:32448] exynos-pcie 10ee0000.pcie0: receive

d Enter_L23_READY DLLP packet


<6>[10032.872593] [2: kworker/u16:1:32448] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[10032.872690] [2: kworker/u16:1:32448] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[10032.902669] [2: kworker/u16:1:32448] [mhi_turn_off_pcie_link] Exited...
<3>[10032.917449] I[0:
netd:19482] [rmnet_mhi0][t] - PKT skb->len=80 s
kb->head=ffffffc07f958200 skb->data=ffffffc07f95821c
<3>[10032.917471] I[0:
netd:19482] [rmnet_mhi0][t] - PKT len: 80, prin
ting first 16 bytes
<3>[10032.917483] I[0:
netd:19482] [rmnet_mhi0][t] - PKT
<3>[10032.917501] I[0:
netd:19482] [rmnet_mhi0][t] - PKT0000: 03 01 00
4c 45 00 00 49 25 0b 40 00 40 11 ee 1b
<6>[10032.917516] I[0:
netd:19482] [rmnet_mhi_xmit] [TX] len 94, type
0x1ada
<6>[10032.917537] I[0:
netd:19482] [TX] 03 01 00 4c 45 00 00 49 25 0b
40 00 40 11 ee 1b
<6>[10032.917574] I[0:
netd:19482] [mhi_wake_dev_from_m3] Initiating M
0 work...
<6>[10032.917636] [2: kworker/u16:1:32448] [m0_work] No pending resume, initia
ting M0.
<6>[10032.917657] [2: kworker/u16:1:32448] [mhi_initiate_m0] Entered MHI state
5, Pending M0 0 Pending M3 0
<6>[10032.917672] [2: kworker/u16:1:32448] [mhi_initiate_m0] Waiting for M0 M1
or M3. Currently 5...
<6>[10032.917686] [2: kworker/u16:1:32448] [mhi_initiate_m0] Wait complete sta
te: 5
<6>[10032.917700] [2: kworker/u16:1:32448] [mhi_turn_on_pcie_link] Entered...
<6>[10032.917721] [2: kworker/u16:1:32448] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, start of poweron, pcie state: 0
<6>[10032.956252] [2: kworker/u16:1:32448] exynos-pcie 10ee0000.pcie0: D state
: 0, 44f400
<6>[10032.971772] [3: kworker/u16:1:32448] exynos-pcie 10ee0000.pcie0: exynos_
pcie_reset: Link up : 0x03b39611
<6>[10032.972060] [3: kworker/u16:1:32448] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, end of poweron, pcie state: 3
<6>[10032.985756] [3: kworker/u16:1:32448] mhi 0000:01:00.0: [debug] pmcsr reg
: 8 dev->current_state : 3
<6>[10032.985917] [3: kworker/u16:1:32448] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[10032.985935] [3: kworker/u16:1:32448] exynos-pcie 10ee0000.pcie0: Recover
y for the link of RC0
<6>[10032.985950] [3: kworker/u16:1:32448] exynos-pcie 10ee0000.pcie0: Recover
config space of RC0 and its EP
<6>[10032.985963] [3: kworker/u16:1:32448] exynos-pcie 10ee0000.pcie0: Recover
RC0
<6>[10032.985998] [3: kworker/u16:1:32448] exynos-pcie 10ee0000.pcie0: Recover
EP of RC0
<6>[10032.986355] [3: kworker/u16:1:32448] exynos-pcie 10ee0000.pcie0: Refresh
ing the saved config space in PCI framework for RC0 and its EP
<6>[10032.991469] [3: kworker/u16:1:32448] [mhi_turn_on_pcie_link] Exited...
<6>[10032.991497] [3: kworker/u16:1:32448] [mhi_initiate_m0] Setting M0 ...
<6>[10032.991615] [3: kworker/u16:1:32448] [mhi_initiate_m0] Exited...
<6>[10032.995449] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 5 link 1, ring type 2, index 0 db 0x5fa26a40
<6>[10032.995494] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10032.995585] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[10032.995602] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Entered

<6>[10032.995616] [2:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT


cancelled, either running or never started
<6>[10032.995990] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[10033.004969] [3: MHI_EV_THREAD: 4604] [rmnet_mhi_tx_cb] [TX_CB] len 94, t
ype 0x1ada
<6>[10033.004995] [3: MHI_EV_THREAD: 4604] [TX_CB] 03 01 00 4c 45 00 00 49 25
0b 40 00 40 11 ee 1b
<6>[10033.005048] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] Empty OOB
chan 100
<6>[10033.040878] I[3:
swapper/3:
0] [rmnet_mhi_poll] [RX] len 162, type
0x1ada
<6>[10033.040907] I[3:
swapper/3:
0] [RX] 01 01 00 90 45 00 00 8f 5f 99
00 00 3d 11 f6 47
<3>[10033.041093] I[0:
swapper/0:
0] [rmnet_mhi0][r] - PKT skb->len=148
skb->head=ffffffc004ea6000 skb->data=ffffffc004ea6040
<3>[10033.041107] I[0:
swapper/0:
0] [rmnet_mhi0][r] - PKT len: 148, pri
nting first 16 bytes
<3>[10033.041119] I[0:
swapper/0:
0] [rmnet_mhi0][r] - PKT
<3>[10033.041137] I[0:
swapper/0:
0] [rmnet_mhi0][r] - PKT0000: 01 01 00
90 45 00 00 8f 5f 99 00 00 3d 11 f6 47
<6>[10033.255975] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10033.256241] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[10033.256271] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[10033.256293] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[10033.256486] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[10033.273746] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26a60
<6>[10033.273773] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10033.273811] [3:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[10033.273825] [3:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[10033.273839] [3:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work was
cancelled
<6>[10033.274445] [3:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[10033.283508] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] Empty OOB
chan 100
<6>[10033.296553] [3:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 13
00 00 01 01 00 36 00 21 00 07 00 01 04 00
<6>[10033.308545] [3:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 13
00 80 01 01 02 36 00 21 00 07 00 02 04 00
<6>[10033.309047] [3:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1c
00 80 01 21 04 39 00 01 00 10 00 28 04 00
<6>[10033.309309] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [P] tID:0 tc:1 tm
:0
<6>[10033.310026] [3:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 01 01 04 83 02 22 00 15 00 01 02 00
<6>[10033.319495] [3:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 1f
00 00 e3 02 00 72 00 00 00 13 00 01 10 00
<6>[10033.326840] [3:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 13
00 80 e3 02 02 72 00 00 00 07 00 02 04 00
<6>[10033.327260] [3:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1b
00 80 e3 02 04 1a 00 01 00 0f 00 01 0c 00
<6>[10033.334943] [5:
rild: 5533] rtmsg : rmnet_data0[0]
<6>[10033.382870] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re

ceived ring 0x0


<6>[10033.382916] [3:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[10033.382934] [3:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[10033.382952] [3:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[10033.383144] [3:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[10033.511399] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [R] tID:0 mc: 16
tc:0 Ver[005683000]
<6>[10033.658290] [1: irq/15-SSP_Int: 1775] [SSP] [M] AR-0,1555,6879,4317,180,2
0,0,0
<6>[10033.788512] [5: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26af0
<6>[10033.788529] [5: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10033.788552] [5:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[10033.788561] [5:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[10033.788570] [5:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work was
cancelled
<6>[10033.789224] [5:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[10033.792647] [6:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 c3 17 51 00 0e 00 14 06 00
<6>[10033.797744] [3:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 ae 19 4f 00 00 00
<6>[10033.801254] [1: Loc_hal_worker: 5557] msm_ipc_router_sendmsg: len, 51
<6>[10033.801294] [1: Loc_hal_worker: 5557] msm_ipc_router_write_pkt: len, 51
<6>[10033.801315] [1: Loc_hal_worker: 5557] IPCB Write: 03 01 01 00 33 00 00 00
01 00 0e 00 03 00 20 00
<7>[10033.801339] [1: Loc_hal_worker: 5557] s5p-ehci 15510000.usb: s5p_ehci_run
time_resume
<6>[10033.801352] [1: Loc_hal_worker: 5557] request_active_lock_set
<7>[10033.801371] [1: Loc_hal_worker: 5557] samsung-usb2phy 15530000.usb2phy: s
amsung_usb2phy_runtime_resume
<6>[10033.801405] [1: Loc_hal_worker: 5557] s5p_ehci_runtime_resume: usage=1, c
hild=0
<7>[10033.801423] [1: Loc_hal_worker: 5557] usb usb1: usb auto-resume
<7>[10033.801439] [1: Loc_hal_worker: 5557] s5p-ehci 15510000.usb: resume root
hub
<7>[10033.801455] [1: Loc_hal_worker: 5557] s5p-ehci 15510000.usb: LRESET 0
<6>[10033.808955] [3:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 ae 19 4f 00 15 00 02 04 00
<7>[10033.822730] [1: Loc_hal_worker: 5557] hub 1-0:1.0: hub_resume
<7>[10033.822773] [1: Loc_hal_worker: 5557] hub 1-0:1.0: port 2: status 0503 ch
ange 0000
<7>[10033.822818] [7:
khubd: 742] hub 1-0:1.0: state 7 ports 2 chg 00
00 evt 0000
<7>[10033.822826] [1: Loc_hal_worker: 5557] usb 1-2: finish resume
<6>[10033.825380] [7: Loc_hal_worker: 5557] [CHKRA:5]>
<6>[10033.831667] I[0:
Binder_2: 4031] ipc_bridge 1-2:1.7: ipc_bridge_int_
cb: len:12
<6>[10033.835924] I[0:
Binder_D: 5893] IPCB Read: 03 07 00 00 14 00 00 00
03 00 fe ff 01 00 fe ff
<6>[10033.835973] [3: kworker/u16:5: 1449] ipc_bridge 1-2:1.7: ipc_bridge_read
: len:36
<6>[10033.836047] [3: kworker/u16:9:32452] do_read_data: ver=3 type=7 src=3:00
00fffe crx=0 siz=20 dst=1:0000fffe
<6>[10033.837662] I[0:
EventThread: 3534] ipc_bridge 1-2:1.7: ipc_bridge_int_

cb: len:12
<6>[10033.841800] I[0:
Binder_E: 5897]
03 00 20 00 01 00 0e 00
<6>[10033.841847] [5: kworker/u16:5: 1449]
: len:32
<6>[10033.841901] [3: kworker/u16:9:32452]
000020 crx=0 siz=14 dst=1:0000000e
<6>[10033.843663] I[0:
swapper/0:
0]
cb: len:12
<6>[10033.845582] [0: thread_hotplug:19286]
0, exe_cmd 4
<6>[10033.845601] [0: thread_hotplug:19286]
dm_hotplug disable = 0
<6>[10033.845613] [0: thread_hotplug:19286]
<6>[10033.848046] I[0:
Binder_A: 5706]
03 00 20 00 01 00 0e 00
<6>[10033.848098] [1: kworker/u16:5: 1449]
: len:32
<6>[10033.848980] [3: kworker/u16:9:32452]
000020 crx=0 siz=14 dst=1:0000000e
<6>[10034.017478] [0: MHI_EV_THREAD: 4604]
ceived ring 0x0
<6>[10034.017588] [0:MHI_STATE_THREA: 4605]
ng to 3
<6>[10034.017609] [0:MHI_STATE_THREA: 4605]
M1 state transition from state 3
<6>[10034.017629] [0:MHI_STATE_THREA: 4605]
ansition to M2
<6>[10034.017822] [0:MHI_STATE_THREA: 4605]
deferred work
<6>[10034.045581] [0: thread_hotplug:19286]
0, exe_cmd 4
<6>[10034.045602] [0: thread_hotplug:19286]
dm_hotplug disable = 0
<6>[10034.045615] [0: thread_hotplug:19286]
<6>[10034.118991] [1:
kworker/1:4:14113]
<6>[10034.249015] [0: thread_hotplug:19286]
0, exe_cmd 4
<6>[10034.249038] [0: thread_hotplug:19286]
dm_hotplug disable = 0
<6>[10034.249053] [0: thread_hotplug:19286]
<7>[10034.353054] [0:
kworker/0:1:25228]
<7>[10034.368894] [0:
kworker/0:1:25228]
<7>[10034.368933] [0:
kworker/0:1:25228]
1
<7>[10034.368953] [0:
kworker/0:1:25228]
hub
<3>[10034.370022] [0:
kworker/0:1:25228]
time_suspend
<7>[10034.382206] [0:
kworker/0:1:25228]
amsung_usb2phy_runtime_suspend
<6>[10034.382241] [0:
kworker/0:1:25228]
<6>[10034.382260] [0:
kworker/0:1:25228]
child=0
<6>[10034.450804] [7:
argosd: 3378]
d:118Mbps, prev level:-1, request level:0
<6>[10034.452174] [0: thread_hotplug:19286]
0, exe_cmd 4
<6>[10034.452191] [0: thread_hotplug:19286]
dm_hotplug disable = 0

IPCB Read: 03 01 00 00 0e 00 00 00
ipc_bridge 1-2:1.7: ipc_bridge_read
do_read_data: ver=3 type=1 src=3:00
ipc_bridge 1-2:1.7: ipc_bridge_int_
frequency info : 1296000, prev_cmd
lcd is on : 1, low power mode = 0,
cluster1 cores hotplug out : 0
IPCB Read: 03 01 00 00 0e 00 00 00
ipc_bridge 1-2:1.7: ipc_bridge_read
do_read_data: ver=3 type=1 src=3:00
[mhi_process_event_ring] MHI STE re
[process_stt_work_item] Transitioni
[process_M1_transition] Processing
[process_M1_transition] Allowing tr
[process_M1_transition] Starting M3
frequency info : 1200000, prev_cmd
lcd is on : 1, low power mode = 0,
cluster1 cores hotplug out : 0
MIF_TH_LV2 from TMU, 1
frequency info : 1000000, prev_cmd
lcd is on : 1, low power mode = 0,
cluster1 cores hotplug out : 0
usb 1-2: usb auto-suspend, wakeup 1
hub 1-0:1.0: hub_suspend
usb usb1: bus auto-suspend, wakeup
s5p-ehci 15510000.usb: suspend root
s5p-ehci 15510000.usb: s5p_ehci_run
samsung-usb2phy 15530000.usb2phy: s
request_active_lock_release
s5p_ehci_runtime_suspend: usage=0,
argos_pm_qos_notify: name:UFS, spee
frequency info : 1296000, prev_cmd
lcd is on : 1, low power mode = 0,

<6>[10034.452203] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0


<6>[10034.453121] [7:
argosd: 3378] argos_freq_lock name:UFS, CPU_MIN=0
, CPU_MAX=0, KFC_MIN=1300000, KFC_MAX=0, MIF=1264000, INT=400000
<6>[10034.618934] [1:
kworker/1:4:14113] MIF_TH_LV1 from TMU, 0
<4>[10034.717513] I[0:
swapper/0:
0] DHCP - 0x108 [RX]
<6>[10035.018937] [1: kworker/u16:9:32452] [mhi_initiate_m3] Entered MHI state
4, Pending M0 0 Pending M3 0
<6>[10035.018964] [1: kworker/u16:9:32452] [mhi_initiate_m3] Triggering wake o
ut of M2
<6>[10035.020522] [0: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26b40
<6>[10035.020544] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10035.020641] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[10035.020658] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[10035.020671] [1:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[10035.021217] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[10035.021282] [2: kworker/u16:9:32452] [mhi_initiate_m3] Cancelled M1 time
r, timer was active
<6>[10035.021392] [2: kworker/u16:9:32452] [mhi_initiate_m3] Waiting for M3 co
mpletion.
<6>[10035.030653] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10035.030803] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 5
<6>[10035.030824] [1:MHI_STATE_THREA: 4605] [process_M3_transition] Processing
M3 state transition
<6>[10035.030943] [2: kworker/u16:9:32452] [mhi_initiate_m3] M3 completion rec
eived
<6>[10035.030969] [2: kworker/u16:9:32452] [mhi_turn_off_pcie_link] Entered...
<6>[10035.042346] [3: kworker/u16:9:32452] mhi 0000:01:00.0: [debug] pmcsr reg
: b dev->current_state : 0
<6>[10035.042444] [3: kworker/u16:9:32452] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[10035.042509] [3: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: ack mes
sage is ok
<6>[10035.042524] [3: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: receive
d Enter_L23_READY DLLP packet
<6>[10035.042543] [3: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[10035.042623] [3: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[10035.072601] [3: kworker/u16:9:32452] [mhi_turn_off_pcie_link] Exited...
<6>[10035.095327] [1: irq/15-SSP_Int: 1775] [SSP] [M] PD: BaroDisabled
<6>[10035.350240] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [P] tID:0 tc:1 tm
:0
<6>[10035.355594] [0: thread_hotplug:19286] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[10035.355615] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10035.355627] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10035.409648] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [R] tID:0 mc: 4 t
c:0 Ver[005683000]
<6>[10035.454346] [7:
argosd: 3378] argos_pm_qos_notify: name:UFS, spee
d:37Mbps, prev level:0, request level:-1
<6>[10035.455552] [0: thread_hotplug:19286] frequency info : 1000000, prev_cmd
0, exe_cmd 4
<6>[10035.455598] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,

dm_hotplug disable = 0
<6>[10035.455613] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10035.456376] [7:
argosd: 3378] argos_freq_unlock name:UFS
<6>[10035.496289] [5:
sh:19815] ATLAS Limit margin : 25000 uV
<6>[10035.557807] [0: thread_hotplug:19286] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[10035.557827] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10035.557838] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10035.650613] [4:
sh:19908] APOLLO Limit margin : 25000 uV
<6>[10035.786674] I[0:
Binder_1: 4030] exynos-pcie 10ee0000.pcie0: cp2ap_w
ake irq involked
<6>[10035.786727] [0:
kworker/0:1:25228] exynos-pcie 10ee0000.pcie0: PCIe: W
ake work for RC0
<6>[10035.786746] [0:
kworker/0:1:25228] exynos-pcie 10ee0000.pcie0: Callbac
k for the event : 4
<6>[10035.786759] [0:
kworker/0:1:25228] [mhi_link_state_cb] Received MSM_PC
IE_EVENT_WAKE
<6>[10035.786813] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 10
<6>[10035.786831] [1:MHI_STATE_THREA: 4605] [process_WAKE_transition] Entered
<6>[10035.786846] [1:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[10035.786864] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, start of poweron, pcie state: 0
<6>[10035.825909] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: D state
: 0, 98b700
<6>[10035.842039] [3:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_reset: Link up : 0x037c4c11
<6>[10035.842339] [3:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, end of poweron, pcie state: 3
<6>[10035.855884] [3:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] pmcsr reg
: 8 dev->current_state : 3
<6>[10035.856053] [3:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[10035.856071] [3:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
y for the link of RC0
<6>[10035.856085] [3:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
config space of RC0 and its EP
<6>[10035.856098] [3:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
RC0
<6>[10035.856132] [3:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
EP of RC0
<6>[10035.856492] [3:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Refresh
ing the saved config space in PCI framework for RC0 and its EP
<6>[10035.865379] [3:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[10035.865404] [3:MHI_STATE_THREA: 4605] [process_WAKE_transition] MHI is in
itialized, transitioning to M0.
<6>[10035.865420] [3:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Entered MHI state
5, Pending M0 0 Pending M3 0
<6>[10035.865434] [3:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Waiting for M0 M1
or M3. Currently 5...
<6>[10035.865448] [3:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Wait complete sta
te: 5
<6>[10035.865486] [3:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[10035.865499] [3:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[10035.865512] [3:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Setting M0 ...
<6>[10035.865702] [3:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Exited...
<6>[10035.865715] [3:MHI_STATE_THREA: 4605] [process_WAKE_transition] Exited.
<6>[10035.867229] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 5 link 1, ring type 2, index 0 db 0x5fa26b60

<6>[10035.867251] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re


ceived ring 0x0
<6>[10035.867284] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[10035.867302] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[10035.867317] [0:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[10035.867912] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[10035.871355] [0:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 c4 17 51 00 0e 00 14 06 00
<6>[10035.872505] [3:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 af 19 4f 00 00 00
<6>[10035.884637] [0:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 af 19 4f 00 15 00 02 04 00
<6>[10035.955859] [0: thread_hotplug:19286] frequency info : 1000000, prev_cmd
0, exe_cmd 4
<6>[10035.955883] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10035.955899] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10035.970926] [5:
sh:20174] G3D
Limit margin : 12500 uV
<6>[10036.055553] [0: thread_hotplug:19286] frequency info : 1000000, prev_cmd
0, exe_cmd 4
<6>[10036.055578] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10036.055592] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10036.092903] [7: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10036.093316] [3:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[10036.093345] [3:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[10036.093369] [3:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[10036.093567] [3:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[10036.104908] [4:
sh:20294] MIF
Limit margin : 12500 uV
<6>[10036.122233] [1:
kworker/1:4:14113] MIF_TH_LV2 from TMU, 1
<6>[10036.553429] [4:
busybox:20683] EXT4-fs (sda18): re-mounted. Opts:
norecovery
<6>[10036.561079] [5:
busybox:20696] EXT4-fs (sda18): re-mounted. Opts:
norecovery
<6>[10036.592361] [7:
busybox:20730] EXT4-fs (sda18): re-mounted. Opts:
norecovery
<6>[10036.601720] [7:
busybox:20741] EXT4-fs (sda18): re-mounted. Opts:
norecovery
<6>[10036.762964] [4:
sh:20919] [LED] led_always_disable_show: led_
fade=0
<6>[10036.766063] [4:
sh:20922] [LED] led_fade_show: led_fade=0
<6>[10036.769379] [7:
sh:20925] [LED] led_fade_time_up_show: led_fa
de=800
<6>[10036.773505] [7:
sh:20929] [LED] led_fade_time_down_show: led_
fade=800
<6>[10036.791837] [1: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26bb0
<6>[10036.791881] [1: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10036.792412] [3:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[10036.792453] [3:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[10036.792482] [3:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work was

cancelled
<6>[10036.793271] [3:MHI_STATE_THREA: 4605]
<6>[10036.796276] [0:
qmuxd: 4756]
00 80 03 01 04 c5 17 51 00 0e 00 14 06 00
<6>[10036.798993] [2:
qmuxd: 3399]
00 00 03 01 00 b0 19 4f 00 00 00
<6>[10036.809764] [1:
qmuxd: 4756]
00 80 03 01 02 b0 19 4f 00 15 00 02 04 00
<6>[10036.828020] [7:
busybox:20977]
norecovery
<6>[10036.834403] [7:
busybox:20987]
norecovery
<6>[10036.847678] [4:
busybox:20995]
norecovery
<6>[10036.848416] [6:
busybox:20997]
norecovery
<6>[10036.865032] [4:
busybox:21013]
norecovery
<6>[10036.898155] [6:
busybox:21037]
norecovery
<6>[10036.911538] [7:
busybox:21054]
norecovery
<6>[10036.913743] [5:
busybox:21053]
norecovery
<6>[10036.921181] [6:
busybox:21064]
norecovery
<6>[10036.927109] [7:
busybox:21071]
norecovery
<6>[10037.017909] [0: MHI_EV_THREAD: 4604]
ceived ring 0x0
<6>[10037.017962] [0:MHI_STATE_THREA: 4605]
ng to 3
<6>[10037.017983] [0:MHI_STATE_THREA: 4605]
M1 state transition from state 3
<6>[10037.018009] [0:MHI_STATE_THREA: 4605]
ansition to M2
<6>[10037.018209] [0:MHI_STATE_THREA: 4605]
deferred work
<6>[10037.031162] [6:
busybox:21167]
norecovery
<6>[10037.056273] [5:
busybox:21189]
norecovery
<6>[10037.059568] [4:
busybox:21195]
norecovery
<6>[10037.061819] [4:
busybox:21196]
norecovery
<6>[10037.068865] [5:
busybox:21204]
norecovery
<6>[10037.110517] [7:
busybox:21238]
norecovery
<6>[10037.112379] [5:
busybox:21237]
norecovery
<6>[10037.117809] [4:
busybox:21247]
norecovery
<6>[10037.120187] [7:
busybox:21249]
norecovery
<6>[10037.122694] [5:
busybox:21251]
norecovery
<6>[10037.125751] [6:
busybox:21257]
norecovery

[process_M0_transition] Exited
[mhi_uci_dump_log] uci_read: 01 1a
[mhi_uci_dump_log] uci_write: 01 0c
[mhi_uci_dump_log] uci_read: 01 21
EXT4-fs (sda18): re-mounted. Opts:
EXT4-fs (sda18): re-mounted. Opts:
EXT4-fs (sda18): re-mounted. Opts:
EXT4-fs (sda18): re-mounted. Opts:
EXT4-fs (sda18): re-mounted. Opts:
EXT4-fs (sda18): re-mounted. Opts:
EXT4-fs (sda18): re-mounted. Opts:
EXT4-fs (sda18): re-mounted. Opts:
EXT4-fs (sda18): re-mounted. Opts:
EXT4-fs (sda18): re-mounted. Opts:
[mhi_process_event_ring] MHI STE re
[process_stt_work_item] Transitioni
[process_M1_transition] Processing
[process_M1_transition] Allowing tr
[process_M1_transition] Starting M3
EXT4-fs (sda18): re-mounted. Opts:
EXT4-fs (sda18): re-mounted. Opts:
EXT4-fs (sda18): re-mounted. Opts:
EXT4-fs (sda18): re-mounted. Opts:
EXT4-fs (sda18): re-mounted. Opts:
EXT4-fs (sda18): re-mounted. Opts:
EXT4-fs (sda18): re-mounted. Opts:
EXT4-fs (sda18): re-mounted. Opts:
EXT4-fs (sda18): re-mounted. Opts:
EXT4-fs (sda18): re-mounted. Opts:
EXT4-fs (sda18): re-mounted. Opts:

<6>[10037.610837] [1: irq/15-SSP_Int: 1775] [SSP] [M] AR-0,975,6453,4738,180,20


,0,0
<6>[10037.622538] [1:
kworker/1:4:14113] MIF_TH_LV1 from TMU, 0
<4>[10037.746884] I[0: wpa_supplicant: 5196] DHCP - 0x108 [RX]
<6>[10038.019163] [0: kworker/u16:9:32452] [mhi_initiate_m3] Entered MHI state
4, Pending M0 0 Pending M3 0
<6>[10038.019247] [0: kworker/u16:9:32452] [mhi_initiate_m3] Triggering wake o
ut of M2
<6>[10038.026174] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26c00
<6>[10038.026234] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10038.026476] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[10038.026527] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[10038.026573] [0:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[10038.030224] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[10038.030421] [1: kworker/u16:9:32452] [mhi_initiate_m3] Cancelled M1 time
r, timer was active
<6>[10038.030666] [1: kworker/u16:9:32452] [mhi_initiate_m3] Waiting for M3 co
mpletion.
<6>[10038.042688] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10038.042919] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 5
<6>[10038.042970] [0:MHI_STATE_THREA: 4605] [process_M3_transition] Processing
M3 state transition
<6>[10038.043204] [1: kworker/u16:9:32452] [mhi_initiate_m3] M3 completion rec
eived
<6>[10038.043267] [1: kworker/u16:9:32452] [mhi_turn_off_pcie_link] Entered...
<6>[10038.055831] [1: kworker/u16:9:32452] mhi 0000:01:00.0: [debug] pmcsr reg
: b dev->current_state : 0
<6>[10038.056007] [1: kworker/u16:9:32452] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[10038.056121] [1: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: ack mes
sage is ok
<6>[10038.056166] [1: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: receive
d Enter_L23_READY DLLP packet
<6>[10038.056221] [1: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[10038.056398] [1: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<4>[10038.063130] I[0:
swapper/0:
0] DHCP - 0x108 [RX]
<6>[10038.086407] [1: kworker/u16:9:32452] [mhi_turn_off_pcie_link] Exited...
<6>[10038.787579] I[0:
swapper/0:
0] exynos-pcie 10ee0000.pcie0: cp2ap_w
ake irq involked
<6>[10038.787729] [0:
kworker/0:0:13589] exynos-pcie 10ee0000.pcie0: PCIe: W
ake work for RC0
<6>[10038.787839] [0:
kworker/0:0:13589] exynos-pcie 10ee0000.pcie0: Callbac
k for the event : 4
<6>[10038.787881] [0:
kworker/0:0:13589] [mhi_link_state_cb] Received MSM_PC
IE_EVENT_WAKE
<6>[10038.788173] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 10
<6>[10038.788223] [2:MHI_STATE_THREA: 4605] [process_WAKE_transition] Entered
<6>[10038.788269] [2:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[10038.788324] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, start of poweron, pcie state: 0
<6>[10038.826302] [3:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: D state

: 0, f47f00
<6>[10038.841717] [3:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_reset: Link up : 0x033e0811
<6>[10038.842105] [3:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, end of poweron, pcie state: 3
<6>[10038.855998] [3:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] pmcsr reg
: 8 dev->current_state : 3
<6>[10038.856336] [3:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[10038.856381] [3:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
y for the link of RC0
<6>[10038.856417] [3:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
config space of RC0 and its EP
<6>[10038.856450] [3:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
RC0
<6>[10038.856520] [3:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
EP of RC0
<6>[10038.856991] [3:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Refresh
ing the saved config space in PCI framework for RC0 and its EP
<6>[10038.862489] [3:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[10038.862548] [3:MHI_STATE_THREA: 4605] [process_WAKE_transition] MHI is in
itialized, transitioning to M0.
<6>[10038.862587] [3:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Entered MHI state
5, Pending M0 0 Pending M3 0
<6>[10038.862624] [3:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Waiting for M0 M1
or M3. Currently 5...
<6>[10038.862660] [3:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Wait complete sta
te: 5
<6>[10038.862695] [3:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[10038.862727] [3:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[10038.862760] [3:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Setting M0 ...
<6>[10038.862983] [3:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Exited...
<6>[10038.863015] [3:MHI_STATE_THREA: 4605] [process_WAKE_transition] Exited.
<6>[10038.864959] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 5 link 1, ring type 2, index 0 db 0x5fa26c20
<6>[10038.865021] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10038.865111] [3:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[10038.865149] [3:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[10038.865185] [3:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[10038.869106] [3:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[10038.869931] [1:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 c6 17 51 00 0e 00 14 06 00
<6>[10038.871797] [0:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 b1 19 4f 00 00 00
<6>[10038.876601] [2:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 b1 19 4f 00 15 00 02 04 00
<4>[10039.002722] I[0: HeapTaskDaemon:19030] DHCP - 0x108 [RX]
<6>[10039.029058] [0:SSRM Handler Th: 9082] max77843_fg_read_vcell: VCELL(4047)
, data(0xca62)
<6>[10039.052274] [0:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 b2 19 43 00 00 00
<6>[10039.060290] [2:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 bd
00 80 03 01 02 b2 19 43 00 b1 00 02 04 00
<6>[10039.268772] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10039.268859] [3:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3

<6>[10039.268885] [3:MHI_STATE_THREA: 4605] [process_M1_transition] Processing


M1 state transition from state 3
<6>[10039.268915] [3:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[10039.269116] [3:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[10039.325671] [1: kworker/u16:9:32452] [SSP] debug_work_func: (61) - Senso
r state: 0x1fc3febf, RC: 1, CC: 0 DC: 0 TC: 0
<6>[10039.325703] [1: kworker/u16:9:32452] [SSP] 0 : 1877, 7232, 3550 (200ms,
0ms)
<6>[10039.325716] [2: kworker/u16:1:32448] vfsspi_work_func_debug ldo: 3, slee
p: 0, irq: 0, tz: 1, type: viper
<6>[10039.325742] [1: kworker/u16:9:32452] [SSP] 9 : 53, 44, 52, 145, 245, 3 (
200ms)
<6>[10039.325759] [1: kworker/u16:9:32452] [SSP] 13 : 1(1ms)
<6>[10039.691285] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [P] tID:0 tc:1 tm
:0
<6>[10039.765543] [0: thread_hotplug:19286] frequency info : 800000, prev_cmd 0
, exe_cmd 4
<6>[10039.765577] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10039.765597] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10039.810002] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [R] tID:0 mc: 9 t
c:0 Ver[005683000]
<6>[10039.865527] [0: thread_hotplug:19286] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[10039.865548] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10039.865560] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10040.272317] [6: kworker/u16:9:32452] [mhi_initiate_m3] Entered MHI state
4, Pending M0 0 Pending M3 0
<6>[10040.272340] [6: kworker/u16:9:32452] [mhi_initiate_m3] Triggering wake o
ut of M2
<6>[10040.273939] [4: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26c90
<6>[10040.273963] [4: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10040.274000] [6:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[10040.274015] [6:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[10040.274029] [6:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[10040.274656] [6:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[10040.274744] [7: kworker/u16:9:32452] [mhi_initiate_m3] Cancelled M1 time
r, timer was active
<6>[10040.274826] [7: kworker/u16:9:32452] [mhi_initiate_m3] Waiting for M3 co
mpletion.
<6>[10040.284211] [4: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10040.284256] [7:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 5
<6>[10040.284279] [7:MHI_STATE_THREA: 4605] [process_M3_transition] Processing
M3 state transition
<6>[10040.284316] [4: kworker/u16:9:32452] [mhi_initiate_m3] M3 completion rec
eived
<6>[10040.284342] [4: kworker/u16:9:32452] [mhi_turn_off_pcie_link] Entered...
<6>[10040.295624] [4: kworker/u16:9:32452] mhi 0000:01:00.0: [debug] pmcsr reg
: b dev->current_state : 0
<6>[10040.295759] [4: kworker/u16:9:32452] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb

<6>[10040.295831] [4: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: ack mes


sage is ok
<6>[10040.295844] [4: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: receive
d Enter_L23_READY DLLP packet
<6>[10040.295862] [4: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[10040.295946] [4: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[10040.325914] [4: kworker/u16:9:32452] [mhi_turn_off_pcie_link] Exited...
<6>[10040.365610] [0: thread_hotplug:19286] frequency info : 1000000, prev_cmd
0, exe_cmd 4
<6>[10040.365635] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10040.365650] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10040.721143] I[0:
swapper/0:
0] exynos-pcie 10ee0000.pcie0: cp2ap_w
ake irq involked
<6>[10040.721198] [0:
kworker/0:0:13589] exynos-pcie 10ee0000.pcie0: PCIe: W
ake work for RC0
<6>[10040.721222] [0:
kworker/0:0:13589] exynos-pcie 10ee0000.pcie0: Callbac
k for the event : 4
<6>[10040.721240] [0:
kworker/0:0:13589] [mhi_link_state_cb] Received MSM_PC
IE_EVENT_WAKE
<6>[10040.721399] [7:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 10
<6>[10040.721419] [7:MHI_STATE_THREA: 4605] [process_WAKE_transition] Entered
<6>[10040.721435] [7:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[10040.721453] [7:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, start of poweron, pcie state: 0
<6>[10040.759247] [7:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: D state
: 0, a6b600
<6>[10040.776758] [7:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_reset: Link up : 0x03b75911
<6>[10040.777131] [7:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, end of poweron, pcie state: 3
<6>[10040.789062] [5:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] pmcsr reg
: 8 dev->current_state : 3
<6>[10040.789243] [5:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[10040.789260] [5:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
y for the link of RC0
<6>[10040.789274] [5:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
config space of RC0 and its EP
<6>[10040.789285] [5:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
RC0
<6>[10040.789325] [5:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
EP of RC0
<6>[10040.789703] [5:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Refresh
ing the saved config space in PCI framework for RC0 and its EP
<6>[10040.795205] [5:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[10040.795225] [5:MHI_STATE_THREA: 4605] [process_WAKE_transition] MHI is in
itialized, transitioning to M0.
<6>[10040.795237] [5:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Entered MHI state
5, Pending M0 0 Pending M3 0
<6>[10040.795250] [5:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Waiting for M0 M1
or M3. Currently 5...
<6>[10040.795261] [5:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Wait complete sta
te: 5
<6>[10040.795272] [5:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[10040.795283] [5:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[10040.795293] [5:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Setting M0 ...

<6>[10040.795350] [5:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Exited...


<6>[10040.795360] [5:MHI_STATE_THREA: 4605] [process_WAKE_transition] Exited.
<6>[10040.799102] [4: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 5 link 1, ring type 2, index 0 db 0x5fa26cb0
<6>[10040.799146] [4: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10040.799180] [7:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[10040.799196] [7:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[10040.799208] [7:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[10040.799604] [7:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[10040.803305] [2:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 40
00 80 03 01 04 c7 17 82 00 34 00 01 08 00
<6>[10041.012302] [7: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10041.012469] [4:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[10041.012496] [4:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[10041.012522] [4:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[10041.012723] [4:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[10041.476882] [2:
argosd: 3378] argos_pm_qos_notify: name:UFS, spee
d:193Mbps, prev level:-1, request level:0
<6>[10041.485182] [3:
argosd: 3378] argos_freq_lock name:UFS, CPU_MIN=0
, CPU_MAX=0, KFC_MIN=1300000, KFC_MAX=0, MIF=1264000, INT=400000
<6>[10041.485992] [3:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 b3 19 43 00 00 00
<6>[10041.496865] [2: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26ce0
<6>[10041.496895] [2: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10041.496933] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[10041.496949] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[10041.496964] [1:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work was
cancelled
<6>[10041.497495] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[10041.509185] [2:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 9f
00 80 03 01 02 b3 19 43 00 93 00 02 04 00
<6>[10041.509461] [2:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 c8 17 51 00 0e 00 14 06 00
<6>[10041.510286] [2:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 b4 19 4f 00 00 00
<6>[10041.522971] [2:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 b4 19 4f 00 15 00 02 04 00
<6>[10041.559790] [1: irq/15-SSP_Int: 1775] [SSP] [M] AR-0,942,6687,4702,180,20
,0,0
<6>[10041.565544] [0: thread_hotplug:19286] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[10041.565566] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10041.565578] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10041.605772] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10041.605875] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[10041.605893] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Processing

M1 state transition from state 3


<6>[10041.605912] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[10041.606105] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[10042.608887] [1: kworker/u16:9:32452] [mhi_initiate_m3] Entered MHI state
4, Pending M0 0 Pending M3 0
<6>[10042.608913] [1: kworker/u16:9:32452] [mhi_initiate_m3] Triggering wake o
ut of M2
<6>[10042.619423] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26d50
<6>[10042.619449] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10042.619490] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[10042.619507] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[10042.619523] [0:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[10042.620046] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[10042.620058] [1: kworker/u16:9:32452] [mhi_initiate_m3] Cancelled M1 time
r, timer was active
<6>[10042.620219] [1: kworker/u16:9:32452] [mhi_initiate_m3] Waiting for M3 co
mpletion.
<6>[10042.629914] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10042.629965] [3:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 5
<6>[10042.629980] [3:MHI_STATE_THREA: 4605] [process_M3_transition] Processing
M3 state transition
<6>[10042.630019] [1: kworker/u16:9:32452] [mhi_initiate_m3] M3 completion rec
eived
<6>[10042.630191] [1: kworker/u16:9:32452] [mhi_turn_off_pcie_link] Entered...
<6>[10042.642345] [1: kworker/u16:9:32452] mhi 0000:01:00.0: [debug] pmcsr reg
: b dev->current_state : 0
<6>[10042.642450] [1: kworker/u16:9:32452] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[10042.642515] [1: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: ack mes
sage is ok
<6>[10042.642529] [1: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: receive
d Enter_L23_READY DLLP packet
<6>[10042.642549] [1: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[10042.642629] [1: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[10042.672606] [1: kworker/u16:9:32452] [mhi_turn_off_pcie_link] Exited...
<6>[10042.768859] [0: thread_hotplug:19286] frequency info : 1500000, prev_cmd
4, exe_cmd 0
<6>[10042.768878] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10042.768888] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10042.868927] [0: thread_hotplug:19286] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[10042.868948] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10042.868960] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10043.321899] I[0:
Thread-810: 8657] exynos-pcie 10ee0000.pcie0: cp2ap_w
ake irq involked
<6>[10043.322059] [0:
kworker/0:0:13589] exynos-pcie 10ee0000.pcie0: PCIe: W
ake work for RC0
<6>[10043.322080] [0:
kworker/0:0:13589] exynos-pcie 10ee0000.pcie0: Callbac

k for the event : 4


<6>[10043.322094] [0:
kworker/0:0:13589] [mhi_link_state_cb] Received MSM_PC
IE_EVENT_WAKE
<6>[10043.322159] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 10
<6>[10043.322176] [1:MHI_STATE_THREA: 4605] [process_WAKE_transition] Entered
<6>[10043.322190] [1:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[10043.322207] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, start of poweron, pcie state: 0
<6>[10043.365867] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: D state
: 0, ff5c00
<6>[10043.382788] [3:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_reset: Link up : 0x03e9d311
<6>[10043.383041] [3:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, end of poweron, pcie state: 3
<6>[10043.395779] [3:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] pmcsr reg
: 8 dev->current_state : 3
<6>[10043.395952] [3:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[10043.395971] [3:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
y for the link of RC0
<6>[10043.395985] [3:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
config space of RC0 and its EP
<6>[10043.395999] [3:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
RC0
<6>[10043.396030] [3:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
EP of RC0
<6>[10043.396401] [3:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Refresh
ing the saved config space in PCI framework for RC0 and its EP
<6>[10043.401841] [3:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[10043.401869] [3:MHI_STATE_THREA: 4605] [process_WAKE_transition] MHI is in
itialized, transitioning to M0.
<6>[10043.401884] [3:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Entered MHI state
5, Pending M0 0 Pending M3 0
<6>[10043.401898] [3:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Waiting for M0 M1
or M3. Currently 5...
<6>[10043.401913] [3:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Wait complete sta
te: 5
<6>[10043.401927] [3:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[10043.401939] [3:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[10043.401952] [3:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Setting M0 ...
<6>[10043.401998] [3:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Exited...
<6>[10043.402011] [3:MHI_STATE_THREA: 4605] [process_WAKE_transition] Exited.
<6>[10043.404779] [1: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 5 link 1, ring type 2, index 0 db 0x5fa26d70
<6>[10043.404806] [1: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10043.404853] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[10043.404872] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[10043.404887] [1:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[10043.405703] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[10043.410042] [2:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 9d
00 80 03 01 04 c9 17 4e 00 91 00 10 02 00
<6>[10043.618795] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10043.618935] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[10043.618956] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Processing

M1 state transition from state 3


<6>[10043.618976] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[10043.619170] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[10044.168951] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26da0
<6>[10044.168974] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10044.169013] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[10044.169029] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[10044.169042] [2:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work was
cancelled
<6>[10044.169519] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[10044.173392] [2:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 ca 17 51 00 0e 00 14 06 00
<6>[10044.174939] [3:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 b5 19 4f 00 00 00
<6>[10044.175547] [0: thread_hotplug:19286] frequency info : 1500000, prev_cmd
4, exe_cmd 0
<6>[10044.175567] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10044.175577] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10044.185309] [1:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 b5 19 4f 00 15 00 02 04 00
<6>[10044.375559] [0: thread_hotplug:19286] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[10044.375580] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10044.375591] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10044.393904] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10044.393997] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[10044.394019] [0:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[10044.394040] [0:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[10044.394235] [0:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[10044.541731] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [P] tID:0 tc:1 tm
:0
<6>[10044.575590] [0: thread_hotplug:19286] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[10044.575610] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10044.575622] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10044.575643] [5:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 b6 19 43 00 00 00
<6>[10044.577227] [6: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26df0
<6>[10044.577250] [6: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10044.577286] [7:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[10044.577305] [7:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[10044.577320] [7:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work was
cancelled
<6>[10044.577939] [7:MHI_STATE_THREA: 4605] [process_M0_transition] Exited

<6>[10044.586797] [7:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 b3
00 80 03 01 02 b6 19 43 00 a7 00 02 04 00
<6>[10044.659993] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [R] tID:0 mc: 9 t
c:0 Ver[005683000]
<6>[10044.675506] [0: thread_hotplug:19286] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[10044.675527] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10044.675539] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10044.686474] [6: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10044.686516] [7:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[10044.686536] [7:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[10044.686555] [7:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[10044.686748] [7:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<4>[10045.352231] [0:
kworker/0:0:13589] dhd_prot_ioctl: SET PM to 2
<6>[10045.459250] [6: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26e30
<6>[10045.459283] [6: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10045.459426] [7:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[10045.459451] [7:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[10045.459470] [7:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work was
cancelled
<6>[10045.459978] [7:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[10045.463570] [7:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 cb 17 51 00 0e 00 14 06 00
<6>[10045.464722] [5:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 b7 19 4f 00 00 00
<6>[10045.471993] [7:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 b7 19 4f 00 15 00 02 04 00
<6>[10045.491422] [5:
argosd: 3378] argos_pm_qos_notify: name:UFS, spee
d:12Mbps, prev level:0, request level:-1
<6>[10045.494369] [5:
argosd: 3378] argos_freq_unlock name:UFS
<6>[10045.575572] [0: thread_hotplug:19286] frequency info : 1000000, prev_cmd
0, exe_cmd 4
<6>[10045.575599] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10045.575615] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10045.680705] [6: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10045.680770] [7:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[10045.680801] [7:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[10045.680896] [7:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[10045.681102] [7:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[10045.690047] [1: irq/15-SSP_Int: 1775] [SSP] [M] AR-0,618,6697,4089,180,20
,0,0
<6>[10046.496713] [0:
argosd: 3378] argos_pm_qos_notify: name:UFS, spee
d:234Mbps, prev level:-1, request level:0
<6>[10046.504352] [2:
argosd: 3378] argos_freq_lock name:UFS, CPU_MIN=0
, CPU_MAX=0, KFC_MIN=1300000, KFC_MAX=0, MIF=1264000, INT=400000

<6>[10046.575583] [0: thread_hotplug:19286] frequency info : 1296000, prev_cmd


0, exe_cmd 4
<6>[10046.575606] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10046.575618] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10046.682462] [2: kworker/u16:9:32452] [mhi_initiate_m3] Entered MHI state
4, Pending M0 0 Pending M3 0
<6>[10046.682490] [2: kworker/u16:9:32452] [mhi_initiate_m3] Triggering wake o
ut of M2
<6>[10046.684220] [2: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26e80
<6>[10046.684240] [2: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10046.684343] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[10046.684359] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[10046.684374] [0:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[10046.684699] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[10046.684765] [2: kworker/u16:9:32452] [mhi_initiate_m3] Cancelled M1 time
r, timer was active
<6>[10046.684872] [2: kworker/u16:9:32452] [mhi_initiate_m3] Waiting for M3 co
mpletion.
<6>[10046.694547] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10046.694653] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 5
<6>[10046.694668] [0:MHI_STATE_THREA: 4605] [process_M3_transition] Processing
M3 state transition
<6>[10046.694763] [2: kworker/u16:9:32452] [mhi_initiate_m3] M3 completion rec
eived
<6>[10046.694784] [2: kworker/u16:9:32452] [mhi_turn_off_pcie_link] Entered...
<6>[10046.705654] [2: kworker/u16:9:32452] mhi 0000:01:00.0: [debug] pmcsr reg
: b dev->current_state : 0
<6>[10046.705752] [2: kworker/u16:9:32452] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[10046.705819] [2: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: ack mes
sage is ok
<6>[10046.705833] [2: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: receive
d Enter_L23_READY DLLP packet
<6>[10046.705853] [2: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[10046.705933] [2: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[10046.735904] [2: kworker/u16:9:32452] [mhi_turn_off_pcie_link] Exited...
<6>[10046.742894] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [P] tID:0 tc:1 tm
:0
<6>[10046.775541] [0: thread_hotplug:19286] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[10046.775563] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10046.775575] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10046.860952] [0:irq/12-fts_touc: 1540] fts_touch 7-0049: [R] tID:0 mc: 9 t
c:0 Ver[005683000]
<6>[10046.875540] [0: thread_hotplug:19286] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[10046.875561] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10046.875573] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10047.282258] [0:irq/12-fts_touc: 1540] fts_touch 7-0049: [P] tID:0 tc:1 tm

:0
<6>[10047.365486] [0:irq/12-fts_touc: 1540] fts_touch 7-0049: [R] tID:0 mc: 6 t
c:0 Ver[005683000]
<6>[10047.375510] [0: thread_hotplug:19286] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[10047.375530] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10047.375542] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10047.475511] [0: thread_hotplug:19286] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[10047.475532] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10047.475544] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10047.505881] [7:
argosd: 3378] argos_pm_qos_notify: name:UFS, spee
d:11Mbps, prev level:0, request level:-1
<6>[10047.508955] [0:
argosd: 3378] argos_freq_unlock name:UFS
<6>[10047.575514] [0: thread_hotplug:19286] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[10047.575535] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10047.575547] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10047.875567] [0: thread_hotplug:19286] frequency info : 1000000, prev_cmd
0, exe_cmd 4
<6>[10047.875594] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10047.875610] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10048.071379] [0:
kworker/0:0:13589] [Time-to-FULL] 368634(secs), 6143(m
ins)
<6>[10048.071631] [0:
kworker/0:0:13589] [Time-to-EMPTY] 9843(secs), 164(min
s)
<6>[10048.107057] [0:
kworker/0:0:13589] [FG] 0080h,ffa5h,7f80h,ff01h,1900h,
0f4eh,5a6ah,53b1h,1c33h,ca0eh,f52eh,ef95h,019fh,543ah,5bach,0fa7h,0fc4h,06d6h,33
80h,5c00h,0536h,0148h,1be8h,5c1ch,1439h,cc70h,2c0fh,da96h,41a5h,0314h,0320h,0e09
h,ffffh,20b0h,2000h,127ch,1400h,2305h,1be8h,80b2h,2472h,cea4h,203bh,09d0h,e3e1h,
290eh,0400h,0000h,62b9h,4bc5h,1603h,0241h,0000h,10eeh,ebc8h,05e0h,0050h,1a45h,7d
54h,ef95h,1680h,1008h,57eah,e000h,0000h,a900h,1005h,0000h,cda9h,0a8bh,7210h,002a
h,5df9h,2271h,0f9fh,0000h,d90dh,d756h,281dh,0000h,0000h,0000h,7f80h,0000h,0000h,
0005h,011ah,05e4h,0000h,006bh,090ch,0050h,2794h,0204h,094dh,0000h,039eh,100fh,0c
0eh,0c0dh,0c0ch,0c0bh,0c0ah,0c09h,0c08h,a516h,4350h,0010h,0087h,ffffh,5c36h,0f20
h,0c08h,fffah,ffeah,0e09h,a600h,ffffh,ffffh,0017h,4c50h,fffch,4170h,0000h,4000h,
0000h,acf0h,0620h,0000h,0000h,0000h,0000h,2414h,0000h,0040h,f4beh,4059h,54beh,fc
0eh,d21eh,0049h,2910h,ca0eh,5410h,
<7>[10048.108615] [0:
kworker/0:0:13589] max77843_fg_write_temp: temperature
to (285, 0x1c80)
<6>[10048.109041] [0:
kworker/0:0:13589] max77843_fg_check_qrtable: QRTABLE2
0_REG(0x1603), QRTABLE30_REG(0x1005)
<7>[10048.112430] [0:
kworker/0:0:13589] max77843_get_fuelgauge_soc: soc(904
), low_batt_alarm(0)
<6>[10048.112454] [0:
kworker/0:0:13589] sec_bat_get_property cable type = 1
sleep_mode = 0
<7>[10048.112659] [0:
kworker/0:0:13589] max77843_chg_get_property : set-cur
rent(0mA), current now(433mA)
<6>[10048.112864] [0:
kworker/0:0:13589] max77843_fg_get_scaled_capacity : C
ABLE TYPE(1) INPUT CURRENT(433) CHARGINGE MODE(NONE)
<7>[10048.112883] [0:
kworker/0:0:13589] max77843_fg_get_scaled_capacity: ca
pacity_max (926)
<6>[10048.113106] [0:
kworker/0:0:13589] max77843_fg_get_scaled_capacity: sc
aled capacity (97.6)
<6>[10048.113141] [0:
kworker/0:0:13589] sec-battery battery.51: sec_bat_get
_battery_info:Vnow(4041mV),Inow(-432mA),Isysnow(-1mA),Imax(460mA),SOC(97%),Tbat(

285),Tchg(319),Twpc(0),is_hc_usb(0)
<6>[10048.113164] [0:
kworker/0:0:13589] sec-battery battery.51: Connected,V
avg(4088mV),Vocv(4202mV),Tamb(284),Iavg(-653mA),Isysavg(-1mA),Iadc(0)
<6>[10048.113906] [0:
kworker/0:0:13589] sdchg_ic_use_adc_check : SELF_DISCH
ARGING(0) SELF_DISCHARGING_ADC(0)
<6>[10048.113929] [0:
kworker/0:0:13589] sec-battery battery.51: sdchg_ic_us
e_discharging_check: Auto_DIS(0), Force_DIS(0)
<6>[10048.114201] [0:
kworker/0:0:13589] max77843_get_float_voltage: battery
cv voltage 0x1d, chg_float_voltage = 4350mV
<6>[10048.114221] [0:
kworker/0:0:13589] sec_bat_swelling_check: status(2),
swell_mode(0:1), cv(0x1d), temp(285)
<6>[10048.114250] [0:
kworker/0:0:13589] sec_bat_swelling_check: DISCHARGING
or NOT-CHARGING. stop swelling mode
<6>[10048.114276] [0:
kworker/0:0:13589] sec-battery battery.51: sec_bat_mon
itor_work: Status(Discharging), mode(None), Health(Good), Cable(1), level(70%),
HV(NONE), Cycle(599)
<6>[10048.114297] [0:
kworker/0:0:13589] power_supply battery: power_supply_
changed
<6>[10048.114408] [0:
kworker/0:0:13589] sec_bat_get_property cable type = 1
sleep_mode = 0
<6>[10048.114446] [0:
kworker/0:0:13589] sec_bat_get_property cable type = 1
<6>[10048.119419] [6:
healthd: 3346] sec_bat_get_property cable type = 1
sleep_mode = 0
<12>[10048.120440] [6:
healthd: 3346] healthd: battery l=97 v=4041 t=28.
5 h=2 st=3 c=0 o=1 ca=-653 ct=0 ps=0 chg= 2016-11-17 16:23:08.724452413 UTC
<12>[10048.120489] [6:
healthd: 3346] healthd: battery l=97 v=4041 t=28.
5 h=2 st=3 c=0 o=1 ca=-653 ct=0 ps=0 chg= 2016-11-17 16:23:08.724452413 UTC hv=0
sec=0 chg=
<14>[10048.120520] [6:
healthd: 3346] healthd-android: healthd_mode_andr
oid_battery_update
<14>[10048.120548] [6:
healthd: 3346] BatteryPropertiesRegistrar: notify
Listeners : start
<14>[10048.120629] [6:
healthd: 3346] IBatteryPropertiesListener : batte
ryPropertiesChanged!
<14>[10048.120629] [6:
healthd: 3346] : BatteryPropertiesRegistrar: noti
fyListeners : done
<6>[10049.138378] [2:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 b8 19 43 00 00 00
<6>[10049.138539] [2:
qmuxd: 3399] [mhi_wake_dev_from_m3] Initiating M
0 work...
<6>[10049.138881] [3: kworker/u16:9:32452] [m0_work] No pending resume, initia
ting M0.
<6>[10049.138928] [3: kworker/u16:9:32452] [mhi_initiate_m0] Entered MHI state
5, Pending M0 0 Pending M3 0
<6>[10049.138967] [3: kworker/u16:9:32452] [mhi_initiate_m0] Waiting for M0 M1
or M3. Currently 5...
<6>[10049.139004] [3: kworker/u16:9:32452] [mhi_initiate_m0] Wait complete sta
te: 5
<6>[10049.139040] [3: kworker/u16:9:32452] [mhi_turn_on_pcie_link] Entered...
<6>[10049.139095] [3: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, start of poweron, pcie state: 0
<6>[10049.179498] [3: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: D state
: 0, dcfb00
<6>[10049.199468] [3: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: exynos_
pcie_reset: Link up : 0x03371b11
<6>[10049.199969] [3: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, end of poweron, pcie state: 3
<6>[10049.212630] [3: kworker/u16:9:32452] mhi 0000:01:00.0: [debug] pmcsr reg
: 8 dev->current_state : 3

<6>[10049.212798] [3: kworker/u16:9:32452] mhi 0000:01:00.0: [debug] device_ve


ndor_id reg : 30017cb
<6>[10049.212851] [3: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: Recover
y for the link of RC0
<6>[10049.212896] [3: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: Recover
config space of RC0 and its EP
<6>[10049.212940] [3: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: Recover
RC0
<6>[10049.213027] [3: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: Recover
EP of RC0
<6>[10049.213491] [3: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: Refresh
ing the saved config space in PCI framework for RC0 and its EP
<6>[10049.218864] [3: kworker/u16:9:32452] [mhi_turn_on_pcie_link] Exited...
<6>[10049.218918] [3: kworker/u16:9:32452] [mhi_initiate_m0] Setting M0 ...
<6>[10049.219155] [3: kworker/u16:9:32452] [mhi_initiate_m0] Exited...
<6>[10049.222727] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 5 link 1, ring type 2, index 0 db 0x5fa26ea0
<6>[10049.222789] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10049.223030] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[10049.223079] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[10049.223126] [0:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[10049.226805] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[10049.235855] [1:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 b3
00 80 03 01 02 b8 19 43 00 a7 00 02 04 00
<6>[10049.444740] [1: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10049.444799] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[10049.444821] [0:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[10049.444846] [0:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[10049.445046] [0:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[10049.640416] [1: irq/15-SSP_Int: 1775] [SSP] [M] AR-0,733,6907,4384,180,20
,0,0
<6>[10050.179856] [1: irq/15-SSP_Int: 1775] [SSP] [M] PD: BaroDisabled
<6>[10050.312450] [1: kworker/u16:9:32452] [SSP] debug_work_func: (61) - Senso
r state: 0x1fc3febf, RC: 1, CC: 0 DC: 0 TC: 0
<6>[10050.312521] [1: kworker/u16:9:32452] [SSP] 0 : 1064, 6811, 5079 (200ms,
0ms)
<6>[10050.312569] [1: kworker/u16:9:32452] [SSP] 9 : 22, 16, 15, 50, 245, 3 (2
00ms)
<6>[10050.312608] [1: kworker/u16:9:32452] [SSP] 13 : 1(1ms)
<6>[10050.312639] [3: kworker/u16:1:32448] vfsspi_work_func_debug ldo: 3, slee
p: 0, irq: 0, tz: 1, type: viper
<6>[10050.445825] [0: kworker/u16:9:32452] [mhi_initiate_m3] Entered MHI state
4, Pending M0 0 Pending M3 0
<6>[10050.445908] [0: kworker/u16:9:32452] [mhi_initiate_m3] Triggering wake o
ut of M2
<6>[10050.456971] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26ee0
<6>[10050.457046] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10050.457312] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[10050.457363] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Entered

<6>[10050.457408] [0:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT


cancelled, either running or never started
<6>[10050.461897] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[10050.461936] [1: kworker/u16:9:32452] [mhi_initiate_m3] Cancelled M1 time
r, timer was active
<6>[10050.462266] [1: kworker/u16:9:32452] [mhi_initiate_m3] Waiting for M3 co
mpletion.
<6>[10050.475621] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10050.475863] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 5
<6>[10050.475919] [1:MHI_STATE_THREA: 4605] [process_M3_transition] Processing
M3 state transition
<6>[10050.476140] [3: kworker/u16:9:32452] [mhi_initiate_m3] M3 completion rec
eived
<6>[10050.476213] [3: kworker/u16:9:32452] [mhi_turn_off_pcie_link] Entered...
<6>[10050.492307] [1: kworker/u16:9:32452] mhi 0000:01:00.0: [debug] pmcsr reg
: b dev->current_state : 0
<6>[10050.492459] [1: kworker/u16:9:32452] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[10050.492649] [1: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: ack mes
sage is ok
<6>[10050.492671] [1: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: receive
d Enter_L23_READY DLLP packet
<6>[10050.492700] [1: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[10050.492814] [1: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[10050.519024] [0:
argosd: 3378] argos_pm_qos_notify: name:UFS, spee
d:129Mbps, prev level:-1, request level:0
<6>[10050.523496] [1: kworker/u16:9:32452] [mhi_turn_off_pcie_link] Exited...
<6>[10050.527432] [0:
argosd: 3378] argos_freq_lock name:UFS, CPU_MIN=0
, CPU_MAX=0, KFC_MIN=1300000, KFC_MAX=0, MIF=1264000, INT=400000
<6>[10050.585624] [0: thread_hotplug:19286] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[10050.585644] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10050.585656] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<4>[10051.115974] I[0:
swapper/0:
0] DHCP - 0x108 [RX]
<6>[10051.529068] [0:
argosd: 3378] argos_pm_qos_notify: name:UFS, spee
d:3Mbps, prev level:0, request level:-1
<6>[10051.538990] [1:
argosd: 3378] argos_freq_unlock name:UFS
<6>[10052.294632] [0:irq/12-fts_touc: 1540] fts_touch 7-0049: [P] tID:0 tc:1 tm
:0
<6>[10052.388966] [0: thread_hotplug:19286] frequency info : 800000, prev_cmd 0
, exe_cmd 4
<6>[10052.388998] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10052.389017] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10052.425361] [0:irq/12-fts_touc: 1540] fts_touch 7-0049: [R] tID:0 mc: 10
tc:0 Ver[005683000]
<6>[10052.488873] [0: thread_hotplug:19286] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[10052.488896] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10052.488908] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10052.992313] [0: thread_hotplug:19286] frequency info : 1000000, prev_cmd
0, exe_cmd 4
<6>[10052.992343] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0

<6>[10052.992358] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0


<6>[10053.590824] [1: irq/15-SSP_Int: 1775] [SSP] [M] AR-0,502,6804,4753,180,20
,0,0
<6>[10055.313432] [0:irq/12-fts_touc: 1540] fts_touch 7-0049: [P] tID:0 tc:1 tm
:0
<6>[10055.398875] [0: thread_hotplug:19286] frequency info : 800000, prev_cmd 0
, exe_cmd 4
<6>[10055.398908] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10055.398927] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10055.498925] [0: thread_hotplug:19286] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[10055.498949] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10055.498961] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10055.921347] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [R] tID:0 mc: 50
tc:0 Ver[005683000]
<6>[10056.002193] [0: thread_hotplug:19286] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[10056.002213] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10056.002225] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10056.502282] [0: thread_hotplug:19286] frequency info : 1000000, prev_cmd
0, exe_cmd 4
<6>[10056.502309] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10056.502325] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10057.543065] [1: irq/15-SSP_Int: 1775] [SSP] [M] AR-0,527,6637,4830,180,20
,0,0
<6>[10058.263686] I[0: wpa_supplicant: 5196] exynos-pcie 10ee0000.pcie0: cp2ap_w
ake irq involked
<6>[10058.264247] [0:
kworker/0:1:25228] exynos-pcie 10ee0000.pcie0: PCIe: W
ake work for RC0
<6>[10058.264280] [0:
kworker/0:1:25228] exynos-pcie 10ee0000.pcie0: Callbac
k for the event : 4
<6>[10058.264299] [0:
kworker/0:1:25228] [mhi_link_state_cb] Received MSM_PC
IE_EVENT_WAKE
<6>[10058.264476] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 10
<6>[10058.264502] [2:MHI_STATE_THREA: 4605] [process_WAKE_transition] Entered
<6>[10058.264522] [2:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[10058.264547] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, start of poweron, pcie state: 0
<6>[10058.302993] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: D state
: 0, ab1600
<6>[10058.319172] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_reset: Link up : 0x03c58011
<6>[10058.319565] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, end of poweron, pcie state: 3
<6>[10058.332640] [2:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] pmcsr reg
: 8 dev->current_state : 3
<6>[10058.332975] [2:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[10058.333032] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
y for the link of RC0
<6>[10058.333077] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
config space of RC0 and its EP
<6>[10058.333119] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
RC0
<6>[10058.333206] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover

EP of RC0
<6>[10058.333671] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Refresh
ing the saved config space in PCI framework for RC0 and its EP
<6>[10058.339215] [2:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[10058.339269] [2:MHI_STATE_THREA: 4605] [process_WAKE_transition] MHI is in
itialized, transitioning to M0.
<6>[10058.339319] [2:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Entered MHI state
5, Pending M0 0 Pending M3 0
<6>[10058.339366] [2:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Waiting for M0 M1
or M3. Currently 5...
<6>[10058.339411] [2:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Wait complete sta
te: 5
<6>[10058.339454] [2:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[10058.339494] [2:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[10058.339535] [2:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Setting M0 ...
<6>[10058.339768] [2:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Exited...
<6>[10058.339809] [2:MHI_STATE_THREA: 4605] [process_WAKE_transition] Exited.
<6>[10058.343890] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 5 link 1, ring type 2, index 0 db 0x5fa26f00
<6>[10058.343953] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10058.344186] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[10058.344239] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[10058.344286] [2:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[10058.348187] [1:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 cc 17 51 00 0e 00 14 06 00
<6>[10058.348521] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[10058.353165] [2:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 b9 19 4f 00 00 00
<6>[10058.366170] [1:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 b9 19 4f 00 15 00 02 04 00
<6>[10058.575353] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10058.575650] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[10058.575704] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[10058.575765] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[10058.575999] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[10059.111969] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [P] tID:0 tc:1 tm
:0
<6>[10059.115595] [0: thread_hotplug:19286] frequency info : 400000, prev_cmd 0
, exe_cmd 4
<6>[10059.115654] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10059.115693] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10059.304184] [0:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 ba 19 43 00 00 00
<6>[10059.306030] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26f50
<6>[10059.306059] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10059.306092] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[10059.306109] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[10059.306124] [2:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work was

cancelled
<6>[10059.306644] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[10059.315649] [0: thread_hotplug:19286] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[10059.315671] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10059.315683] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10059.317548] [2:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 b3
00 80 03 01 02 ba 19 43 00 a7 00 02 04 00
<6>[10059.324665] [1:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 cd 17 51 00 0e 00 14 06 00
<6>[10059.325550] [2:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 bb 19 4f 00 00 00
<6>[10059.339390] [2:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 bb 19 4f 00 15 00 02 04 00
<6>[10059.415377] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10059.415450] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[10059.415490] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[10059.415511] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[10059.415703] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[10059.683464] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [R] tID:0 mc: 47
tc:0 Ver[005683000]
<6>[10059.715513] [0: thread_hotplug:19286] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[10059.715534] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10059.715547] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10060.215526] [0: thread_hotplug:19286] frequency info : 1000000, prev_cmd
0, exe_cmd 4
<6>[10060.215553] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10060.215568] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10060.223446] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [P] tID:0 tc:1 tm
:0
<6>[10060.415573] [0: thread_hotplug:19286] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[10060.415596] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10060.415607] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10060.418935] [2: kworker/u16:9:32452] [mhi_initiate_m3] Entered MHI state
4, Pending M0 0 Pending M3 0
<6>[10060.418957] [2: kworker/u16:9:32452] [mhi_initiate_m3] Triggering wake o
ut of M2
<6>[10060.420661] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26fc0
<6>[10060.420685] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10060.420797] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[10060.420813] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[10060.420829] [2:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[10060.421209] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[10060.421218] [3: kworker/u16:9:32452] [mhi_initiate_m3] Cancelled M1 time
r, timer was active

<6>[10060.421378] [3: kworker/u16:9:32452] [mhi_initiate_m3] Waiting for M3 co


mpletion.
<6>[10060.430776] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10060.430904] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 5
<6>[10060.430922] [1:MHI_STATE_THREA: 4605] [process_M3_transition] Processing
M3 state transition
<6>[10060.430956] [3: kworker/u16:9:32452] [mhi_initiate_m3] M3 completion rec
eived
<6>[10060.430980] [3: kworker/u16:9:32452] [mhi_turn_off_pcie_link] Entered...
<6>[10060.442337] [2: kworker/u16:9:32452] mhi 0000:01:00.0: [debug] pmcsr reg
: b dev->current_state : 0
<6>[10060.442466] [2: kworker/u16:9:32452] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[10060.442539] [2: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: ack mes
sage is ok
<6>[10060.442554] [2: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: receive
d Enter_L23_READY DLLP packet
<6>[10060.442575] [2: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[10060.442669] [2: kworker/u16:9:32452] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[10060.475775] [2: kworker/u16:9:32452] [mhi_turn_off_pcie_link] Exited...
<6>[10061.071311] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [R] tID:0 mc: 70
tc:0 Ver[005683000]
<6>[10061.115639] [0: thread_hotplug:19286] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[10061.115661] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10061.115672] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10061.298935] [7: kworker/u16:9:32452] vfsspi_work_func_debug ldo: 3, slee
p: 0, irq: 0, tz: 1, type: viper
<6>[10061.325568] [7: kworker/u16:9:32452] [SSP] debug_work_func: (62) - Senso
r state: 0x1fc3febf, RC: 1, CC: 0 DC: 0 TC: 0
<6>[10061.325586] [7: kworker/u16:9:32452] [SSP] 0 : 575, 6681, 4470 (200ms, 0
ms)
<6>[10061.325601] [7: kworker/u16:9:32452] [SSP] 9 : 34, 27, 31, 87, 245, 3 (2
00ms)
<6>[10061.325614] [7: kworker/u16:9:32452] [SSP] 13 : 1(1ms)
<6>[10061.455243] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [P] tID:0 tc:1 tm
:0
<6>[10061.515535] [0: thread_hotplug:19286] frequency info : 1000000, prev_cmd
0, exe_cmd 4
<6>[10061.515564] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10061.515579] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10061.610612] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [R] tID:0 mc: 12
tc:0 Ver[005683000]
<6>[10061.615507] [0: thread_hotplug:19286] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[10061.615528] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10061.615540] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10061.671807] [2: irq/15-SSP_Int: 1775] [SSP] [M] AR-0,563,6666,4709,180,20
,0,0
<4>[10061.769825] I[0:
swapper/0:
0] DHCP - 0x108 [RX]
<6>[10062.115523] [0: thread_hotplug:19286] frequency info : 1000000, prev_cmd
0, exe_cmd 4
<6>[10062.115548] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,

dm_hotplug disable = 0
<6>[10062.115564] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10062.120153] I[0:
swapper/0:
0] exynos-pcie 10ee0000.pcie0: cp2ap_w
ake irq involked
<6>[10062.120195] [0:
kworker/0:0:13589] exynos-pcie 10ee0000.pcie0: PCIe: W
ake work for RC0
<6>[10062.120220] [0:
kworker/0:0:13589] exynos-pcie 10ee0000.pcie0: Callbac
k for the event : 4
<6>[10062.120237] [0:
kworker/0:0:13589] [mhi_link_state_cb] Received MSM_PC
IE_EVENT_WAKE
<6>[10062.120297] [5:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 10
<6>[10062.120316] [5:MHI_STATE_THREA: 4605] [process_WAKE_transition] Entered
<6>[10062.120329] [5:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[10062.120345] [5:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, start of poweron, pcie state: 0
<6>[10062.159364] [5:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: D state
: 0, 637e00
<6>[10062.175931] [6:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_reset: Link up : 0x03134211
<6>[10062.176348] [6:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, end of poweron, pcie state: 3
<6>[10062.189196] [3:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] pmcsr reg
: 8 dev->current_state : 3
<6>[10062.189364] [3:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[10062.189388] [3:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
y for the link of RC0
<6>[10062.189407] [3:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
config space of RC0 and its EP
<6>[10062.189424] [3:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
RC0
<6>[10062.189471] [3:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
EP of RC0
<6>[10062.189829] [3:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Refresh
ing the saved config space in PCI framework for RC0 and its EP
<6>[10062.195262] [7:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[10062.195296] [7:MHI_STATE_THREA: 4605] [process_WAKE_transition] MHI is in
itialized, transitioning to M0.
<6>[10062.195321] [7:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Entered MHI state
5, Pending M0 0 Pending M3 0
<6>[10062.195344] [7:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Waiting for M0 M1
or M3. Currently 5...
<6>[10062.195364] [7:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Wait complete sta
te: 5
<6>[10062.195384] [7:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[10062.195401] [7:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[10062.195420] [7:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Setting M0 ...
<6>[10062.195661] [7:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Exited...
<6>[10062.195680] [7:MHI_STATE_THREA: 4605] [process_WAKE_transition] Exited.
<6>[10062.199365] [6: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 5 link 1, ring type 2, index 0 db 0x5fa26fe0
<6>[10062.199398] [6: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10062.199446] [7:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[10062.199468] [7:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[10062.199488] [7:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[10062.200015] [7:MHI_STATE_THREA: 4605] [process_M0_transition] Exited

<6>[10062.203509] [5:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 ce 17 51 00 0e 00 14 06 00
<6>[10062.204363] [6:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 bc 19 4f 00 00 00
<6>[10062.217722] [4:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 bc 19 4f 00 15 00 02 04 00
<6>[10062.427257] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10062.427638] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[10062.427699] [0:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[10062.427760] [0:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[10062.435071] [0:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[10063.435858] [2: kworker/u16:1:32448] [mhi_initiate_m3] Entered MHI state
4, Pending M0 0 Pending M3 0
<6>[10063.435940] [2: kworker/u16:1:32448] [mhi_initiate_m3] Triggering wake o
ut of M2
<6>[10063.438206] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa27030
<6>[10063.438267] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10063.438510] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[10063.438560] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[10063.438605] [1:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[10063.443061] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[10063.443207] [2: kworker/u16:1:32448] [mhi_initiate_m3] Cancelled M1 time
r, timer was active
<6>[10063.443450] [2: kworker/u16:1:32448] [mhi_initiate_m3] Waiting for M3 co
mpletion.
<6>[10063.457026] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10063.457274] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 5
<6>[10063.457325] [1:MHI_STATE_THREA: 4605] [process_M3_transition] Processing
M3 state transition
<6>[10063.457573] [2: kworker/u16:1:32448] [mhi_initiate_m3] M3 completion rec
eived
<6>[10063.457637] [2: kworker/u16:1:32448] [mhi_turn_off_pcie_link] Entered...
<6>[10063.469091] [2: kworker/u16:1:32448] mhi 0000:01:00.0: [debug] pmcsr reg
: b dev->current_state : 0
<6>[10063.469284] [2: kworker/u16:1:32448] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[10063.469397] [2: kworker/u16:1:32448] exynos-pcie 10ee0000.pcie0: ack mes
sage is ok
<6>[10063.469444] [2: kworker/u16:1:32448] exynos-pcie 10ee0000.pcie0: receive
d Enter_L23_READY DLLP packet
<6>[10063.469497] [2: kworker/u16:1:32448] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[10063.469664] [2: kworker/u16:1:32448] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[10063.499674] [2: kworker/u16:1:32448] [mhi_turn_off_pcie_link] Exited...
<6>[10064.668517] I[0:
swapper/0:
0] exynos-pcie 10ee0000.pcie0: cp2ap_w
ake irq involked
<6>[10064.668682] [0:
kworker/0:0:13589] exynos-pcie 10ee0000.pcie0: PCIe: W
ake work for RC0

<6>[10064.668740] [0:
kworker/0:0:13589] exynos-pcie 10ee0000.pcie0: Callbac
k for the event : 4
<6>[10064.668782] [0:
kworker/0:0:13589] [mhi_link_state_cb] Received MSM_PC
IE_EVENT_WAKE
<6>[10064.669328] [3:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 10
<6>[10064.669384] [3:MHI_STATE_THREA: 4605] [process_WAKE_transition] Entered
<6>[10064.669430] [3:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[10064.669487] [3:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, start of poweron, pcie state: 0
<6>[10064.709532] [3:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: D state
: 0, 637e00
<6>[10064.725270] [0:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_reset: Link up : 0x03059811
<6>[10064.725718] [0:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, end of poweron, pcie state: 3
<6>[10064.739128] [0:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] pmcsr reg
: 8 dev->current_state : 3
<6>[10064.739293] [0:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[10064.739325] [0:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
y for the link of RC0
<6>[10064.739348] [0:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
config space of RC0 and its EP
<6>[10064.739370] [0:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
RC0
<6>[10064.739425] [0:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
EP of RC0
<6>[10064.739944] [0:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Refresh
ing the saved config space in PCI framework for RC0 and its EP
<6>[10064.745293] [0:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[10064.745335] [0:MHI_STATE_THREA: 4605] [process_WAKE_transition] MHI is in
itialized, transitioning to M0.
<6>[10064.745362] [0:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Entered MHI state
5, Pending M0 0 Pending M3 0
<6>[10064.745387] [0:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Waiting for M0 M1
or M3. Currently 5...
<6>[10064.745411] [0:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Wait complete sta
te: 5
<6>[10064.745434] [0:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[10064.745454] [0:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[10064.746393] [0:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Setting M0 ...
<6>[10064.746706] [0:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Exited...
<6>[10064.746781] [0:MHI_STATE_THREA: 4605] [process_WAKE_transition] Exited.
<6>[10064.748788] [1: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 5 link 1, ring type 2, index 0 db 0x5fa27050
<6>[10064.748921] [1: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10064.749000] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[10064.749082] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[10064.749197] [0:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[10064.753055] [2:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 cf 17 51 00 0e 00 14 06 00
<6>[10064.754875] [2:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 bd 19 4f 00 00 00
<6>[10064.755237] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[10064.767690] [2:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 bd 19 4f 00 15 00 02 04 00

<6>[10064.976912] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re


ceived ring 0x0
<6>[10064.977101] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[10064.977125] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[10064.977153] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[10064.977357] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[10065.084425] [2: irq/15-SSP_Int: 1775] [SSP] [M] PD: BaroDisabled
<6>[10065.623864] [2: irq/15-SSP_Int: 1775] [SSP] [M] AR-0,926,6698,3925,180,20
,0,0
<6>[10065.878594] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [P] tID:0 tc:1 tm
:0
<6>[10065.918861] [0: thread_hotplug:19286] frequency info : 800000, prev_cmd 0
, exe_cmd 4
<6>[10065.918897] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10065.918917] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10065.980174] [5: kworker/u16:1:32448] [mhi_initiate_m3] Entered MHI state
4, Pending M0 0 Pending M3 0
<6>[10065.980201] [5: kworker/u16:1:32448] [mhi_initiate_m3] Triggering wake o
ut of M2
<6>[10065.985195] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [R] tID:0 mc: 8 t
c:0 Ver[005683000]
<6>[10065.987078] [7: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa270a0
<6>[10065.987104] [7: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10065.987145] [4:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[10065.987165] [4:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[10065.987179] [4:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[10065.987580] [4:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[10065.987588] [7: kworker/u16:1:32448] [mhi_initiate_m3] Cancelled M1 time
r, timer was active
<6>[10065.987749] [7: kworker/u16:1:32448] [mhi_initiate_m3] Waiting for M3 co
mpletion.
<6>[10065.997484] [7: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10065.997528] [4:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 5
<6>[10065.997548] [4:MHI_STATE_THREA: 4605] [process_M3_transition] Processing
M3 state transition
<6>[10065.997579] [7: kworker/u16:1:32448] [mhi_initiate_m3] M3 completion rec
eived
<6>[10065.997602] [7: kworker/u16:1:32448] [mhi_turn_off_pcie_link] Entered...
<6>[10066.008976] [7: kworker/u16:1:32448] mhi 0000:01:00.0: [debug] pmcsr reg
: b dev->current_state : 0
<6>[10066.009112] [7: kworker/u16:1:32448] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[10066.009187] [7: kworker/u16:1:32448] exynos-pcie 10ee0000.pcie0: ack mes
sage is ok
<6>[10066.009204] [7: kworker/u16:1:32448] exynos-pcie 10ee0000.pcie0: receive
d Enter_L23_READY DLLP packet
<6>[10066.009225] [7: kworker/u16:1:32448] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[10066.009324] [7: kworker/u16:1:32448] exynos-pcie 10ee0000.pcie0: exynos_

pcie_poweroff, end of poweroff, pcie state: 0


<6>[10066.018845] [0: thread_hotplug:19286] frequency info : 1000000, prev_cmd
0, exe_cmd 4
<6>[10066.018868] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10066.018883] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10066.039295] [7: kworker/u16:1:32448] [mhi_turn_off_pcie_link] Exited...
<6>[10066.205750] I[0:
swapper/0:
0] exynos-pcie 10ee0000.pcie0: cp2ap_w
ake irq involked
<6>[10066.205804] [0:
kworker/0:0:13589] exynos-pcie 10ee0000.pcie0: PCIe: W
ake work for RC0
<6>[10066.205825] [0:
kworker/0:0:13589] exynos-pcie 10ee0000.pcie0: Callbac
k for the event : 4
<6>[10066.205839] [0:
kworker/0:0:13589] [mhi_link_state_cb] Received MSM_PC
IE_EVENT_WAKE
<6>[10066.205899] [4:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 10
<6>[10066.205929] [4:MHI_STATE_THREA: 4605] [process_WAKE_transition] Entered
<6>[10066.205955] [4:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[10066.205981] [4:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, start of poweron, pcie state: 0
<6>[10066.245934] [7:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: D state
: 0, 9a3a00
<6>[10066.265517] [6:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_reset: Link up : 0x03301c11
<6>[10066.265901] [6:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, end of poweron, pcie state: 3
<6>[10066.279070] [7:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] pmcsr reg
: 8 dev->current_state : 3
<6>[10066.279251] [7:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[10066.279275] [7:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
y for the link of RC0
<6>[10066.279296] [7:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
config space of RC0 and its EP
<6>[10066.279314] [7:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
RC0
<6>[10066.279363] [7:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
EP of RC0
<6>[10066.279723] [7:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Refresh
ing the saved config space in PCI framework for RC0 and its EP
<6>[10066.285203] [7:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[10066.285225] [7:MHI_STATE_THREA: 4605] [process_WAKE_transition] MHI is in
itialized, transitioning to M0.
<6>[10066.285245] [7:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Entered MHI state
5, Pending M0 0 Pending M3 0
<6>[10066.285265] [7:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Waiting for M0 M1
or M3. Currently 5...
<6>[10066.285284] [7:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Wait complete sta
te: 5
<6>[10066.285302] [7:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[10066.285318] [7:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[10066.285336] [7:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Setting M0 ...
<6>[10066.285565] [7:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Exited...
<6>[10066.285584] [7:MHI_STATE_THREA: 4605] [process_WAKE_transition] Exited.
<6>[10066.288324] [7: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 5 link 1, ring type 2, index 0 db 0x5fa270c0
<6>[10066.288353] [7: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10066.288397] [4:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni

ng to 2
<6>[10066.288423] [4:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[10066.288446] [4:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[10066.289104] [4:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[10066.292771] [6:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 9d
00 80 03 01 04 d0 17 4e 00 91 00 10 02 00
<6>[10066.501569] [7: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10066.501614] [4:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[10066.501638] [4:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[10066.501660] [4:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[10066.501752] [4:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[10066.518925] [0: thread_hotplug:19286] frequency info : 1000000, prev_cmd
0, exe_cmd 4
<6>[10066.518951] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10066.518966] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10067.250920] [2: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa270f0
<6>[10067.251003] [2: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10067.251252] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[10067.251304] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[10067.251350] [0:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work was
cancelled
<6>[10067.255266] [1:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 d1 17 51 00 0e 00 14 06 00
<6>[10067.256233] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[10067.257330] [3:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 be 19 4f 00 00 00
<6>[10067.269502] [1:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 be 19 4f 00 15 00 02 04 00
<6>[10067.478783] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10067.479109] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[10067.479163] [0:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[10067.479223] [0:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[10067.479459] [0:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[10067.728290] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [P] tID:0 tc:1 tm
:0
<6>[10067.818869] [0: thread_hotplug:19286] frequency info : 800000, prev_cmd 0
, exe_cmd 4
<6>[10067.818903] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10067.818923] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10067.918942] [0: thread_hotplug:19286] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[10067.918963] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10067.918975] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0

<6>[10068.482242] [0: kworker/u16:1:32448] [mhi_initiate_m3] Entered MHI state


4, Pending M0 0 Pending M3 0
<6>[10068.482273] [0: kworker/u16:1:32448] [mhi_initiate_m3] Triggering wake o
ut of M2
<6>[10068.484205] [0: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa27140
<6>[10068.484234] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10068.484281] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[10068.484296] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[10068.484311] [0:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[10068.484798] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[10068.484841] [1: kworker/u16:1:32448] [mhi_initiate_m3] Cancelled M1 time
r, timer was active
<6>[10068.484952] [1: kworker/u16:1:32448] [mhi_initiate_m3] Waiting for M3 co
mpletion.
<6>[10068.495040] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10068.495084] [3:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 5
<6>[10068.495100] [3:MHI_STATE_THREA: 4605] [process_M3_transition] Processing
M3 state transition
<6>[10068.495133] [3: kworker/u16:1:32448] [mhi_initiate_m3] M3 completion rec
eived
<6>[10068.495155] [3: kworker/u16:1:32448] [mhi_turn_off_pcie_link] Entered...
<6>[10068.509016] [1: kworker/u16:1:32448] mhi 0000:01:00.0: [debug] pmcsr reg
: b dev->current_state : 0
<6>[10068.509156] [1: kworker/u16:1:32448] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[10068.509230] [1: kworker/u16:1:32448] exynos-pcie 10ee0000.pcie0: ack mes
sage is ok
<6>[10068.509245] [1: kworker/u16:1:32448] exynos-pcie 10ee0000.pcie0: receive
d Enter_L23_READY DLLP packet
<6>[10068.509266] [1: kworker/u16:1:32448] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[10068.509359] [1: kworker/u16:1:32448] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[10068.539444] [1: kworker/u16:1:32448] [mhi_turn_off_pcie_link] Exited...
<6>[10069.341046] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [R] tID:0 mc: 134
tc:0 Ver[005683000]
<6>[10069.356673] [1:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 bf 19 43 00 00 00
<6>[10069.356734] [1:
qmuxd: 3399] [mhi_wake_dev_from_m3] Initiating M
0 work...
<6>[10069.356892] [2: kworker/u16:1:32448] [m0_work] No pending resume, initia
ting M0.
<6>[10069.356914] [2: kworker/u16:1:32448] [mhi_initiate_m0] Entered MHI state
5, Pending M0 0 Pending M3 0
<6>[10069.356929] [2: kworker/u16:1:32448] [mhi_initiate_m0] Waiting for M0 M1
or M3. Currently 5...
<6>[10069.356943] [2: kworker/u16:1:32448] [mhi_initiate_m0] Wait complete sta
te: 5
<6>[10069.356957] [2: kworker/u16:1:32448] [mhi_turn_on_pcie_link] Entered...
<6>[10069.356978] [2: kworker/u16:1:32448] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, start of poweron, pcie state: 0
<6>[10069.395877] [2: kworker/u16:1:32448] exynos-pcie 10ee0000.pcie0: D state
: 0, 252000
<6>[10069.416136] [3: kworker/u16:1:32448] exynos-pcie 10ee0000.pcie0: exynos_

pcie_reset: Link up : 0x035d7211


<6>[10069.416391] [3: kworker/u16:1:32448] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, end of poweron, pcie state: 3
<6>[10069.428996] [3: kworker/u16:1:32448] mhi 0000:01:00.0: [debug] pmcsr reg
: 8 dev->current_state : 3
<6>[10069.429164] [3: kworker/u16:1:32448] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[10069.429184] [3: kworker/u16:1:32448] exynos-pcie 10ee0000.pcie0: Recover
y for the link of RC0
<6>[10069.429199] [3: kworker/u16:1:32448] exynos-pcie 10ee0000.pcie0: Recover
config space of RC0 and its EP
<6>[10069.429212] [3: kworker/u16:1:32448] exynos-pcie 10ee0000.pcie0: Recover
RC0
<6>[10069.429245] [3: kworker/u16:1:32448] exynos-pcie 10ee0000.pcie0: Recover
EP of RC0
<6>[10069.429618] [3: kworker/u16:1:32448] exynos-pcie 10ee0000.pcie0: Refresh
ing the saved config space in PCI framework for RC0 and its EP
<6>[10069.434864] [3: kworker/u16:1:32448] [mhi_turn_on_pcie_link] Exited...
<6>[10069.434892] [3: kworker/u16:1:32448] [mhi_initiate_m0] Setting M0 ...
<6>[10069.435019] [3: kworker/u16:1:32448] [mhi_initiate_m0] Exited...
<6>[10069.438981] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 5 link 1, ring type 2, index 0 db 0x5fa27160
<6>[10069.439011] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10069.439152] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[10069.439172] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[10069.439186] [1:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[10069.439681] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[10069.450465] [1:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 b3
00 80 03 01 02 bf 19 43 00 a7 00 02 04 00
<6>[10069.522229] [0: thread_hotplug:19286] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[10069.522252] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10069.522264] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10069.572480] [2: irq/15-SSP_Int: 1775] [SSP] [M] AR-0,1026,6539,4677,180,2
0,0,0
<6>[10069.622176] [0: thread_hotplug:19286] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[10069.622197] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10069.622208] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10069.659228] [5: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10069.659381] [4:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[10069.659407] [4:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[10069.659433] [4:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[10069.659634] [4:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[10069.660418] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [P] tID:0 tc:1 tm
:0
<6>[10069.722200] [0: thread_hotplug:19286] frequency info : 1000000, prev_cmd
0, exe_cmd 4
<6>[10069.722227] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0

<6>[10069.722243] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0


<6>[10069.779816] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [R] tID:0 mc: 9 t
c:0 Ver[005683000]
<6>[10069.822185] [0: thread_hotplug:19286] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[10069.822205] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10069.822216] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10070.190796] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [P] tID:0 tc:1 tm
:0
<6>[10070.222214] [0: thread_hotplug:19286] frequency info : 1000000, prev_cmd
0, exe_cmd 4
<6>[10070.222244] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10070.222259] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10070.309996] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [R] tID:0 mc: 9 t
c:0 Ver[005683000]
<6>[10070.322181] [0: thread_hotplug:19286] frequency info : 1000000, prev_cmd
0, exe_cmd 4
<6>[10070.322211] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10070.322227] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10070.427196] [0: thread_hotplug:19286] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[10070.427216] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10070.427227] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10070.662314] [4: kworker/u16:18:32540] [mhi_initiate_m3] Entered MHI state
4, Pending M0 0 Pending M3 0
<6>[10070.662339] [4: kworker/u16:18:32540] [mhi_initiate_m3] Triggering wake o
ut of M2
<6>[10070.664019] [5: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa260a0
<6>[10070.664043] [5: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10070.664105] [4:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[10070.664123] [4:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[10070.664137] [4:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[10070.664744] [4:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[10070.664753] [6: kworker/u16:18:32540] [mhi_initiate_m3] Cancelled M1 time
r, timer was active
<6>[10070.664916] [6: kworker/u16:18:32540] [mhi_initiate_m3] Waiting for M3 co
mpletion.
<6>[10070.674522] [5: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10070.674562] [4:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 5
<6>[10070.674580] [4:MHI_STATE_THREA: 4605] [process_M3_transition] Processing
M3 state transition
<6>[10070.674620] [6: kworker/u16:18:32540] [mhi_initiate_m3] M3 completion rec
eived
<6>[10070.674644] [6: kworker/u16:18:32540] [mhi_turn_off_pcie_link] Entered...
<6>[10070.685615] [6: kworker/u16:18:32540] mhi 0000:01:00.0: [debug] pmcsr reg
: b dev->current_state : 0
<6>[10070.685739] [6: kworker/u16:18:32540] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[10070.685812] [6: kworker/u16:18:32540] exynos-pcie 10ee0000.pcie0: ack mes
sage is ok

<6>[10070.685827] [6: kworker/u16:18:32540] exynos-pcie 10ee0000.pcie0: receive


d Enter_L23_READY DLLP packet
<6>[10070.685847] [6: kworker/u16:18:32540] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[10070.685935] [6: kworker/u16:18:32540] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[10070.715904] [6: kworker/u16:18:32540] [mhi_turn_off_pcie_link] Exited...
<6>[10070.782237] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [P] tID:0 tc:1 tm
:0
<6>[10070.832198] [0: thread_hotplug:19286] frequency info : 1000000, prev_cmd
0, exe_cmd 4
<6>[10070.832227] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10070.832242] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10070.932308] [0: thread_hotplug:19286] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[10070.932332] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10070.932344] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10071.080032] I[0:
swapper/0:
0] exynos-pcie 10ee0000.pcie0: cp2ap_w
ake irq involked
<6>[10071.080079] [0:
kworker/0:0:13589] exynos-pcie 10ee0000.pcie0: PCIe: W
ake work for RC0
<6>[10071.080099] [0:
kworker/0:0:13589] exynos-pcie 10ee0000.pcie0: Callbac
k for the event : 4
<6>[10071.080113] [0:
kworker/0:0:13589] [mhi_link_state_cb] Received MSM_PC
IE_EVENT_WAKE
<6>[10071.080163] [4:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 10
<6>[10071.080181] [4:MHI_STATE_THREA: 4605] [process_WAKE_transition] Entered
<6>[10071.080196] [4:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[10071.080211] [4:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, start of poweron, pcie state: 0
<6>[10071.087551] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [R] tID:0 mc: 25
tc:0 Ver[005683000]
<6>[10071.119184] [7:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: D state
: 0, 252000
<6>[10071.132207] [0: thread_hotplug:19286] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[10071.132226] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10071.132238] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10071.136616] [6:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_reset: Link up : 0x032c7311
<6>[10071.136898] [6:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, end of poweron, pcie state: 3
<6>[10071.149059] [6:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] pmcsr reg
: 8 dev->current_state : 3
<6>[10071.149239] [6:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[10071.149263] [6:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
y for the link of RC0
<6>[10071.149283] [6:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
config space of RC0 and its EP
<6>[10071.149301] [6:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
RC0
<6>[10071.149339] [6:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
EP of RC0
<6>[10071.149684] [6:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Refresh
ing the saved config space in PCI framework for RC0 and its EP

<6>[10071.155122] [6:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...


<6>[10071.155150] [6:MHI_STATE_THREA: 4605] [process_WAKE_transition] MHI is in
itialized, transitioning to M0.
<6>[10071.155171] [6:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Entered MHI state
5, Pending M0 0 Pending M3 0
<6>[10071.155193] [6:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Waiting for M0 M1
or M3. Currently 5...
<6>[10071.155213] [6:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Wait complete sta
te: 5
<6>[10071.155232] [6:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[10071.155249] [6:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[10071.155267] [6:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Setting M0 ...
<6>[10071.155506] [6:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Exited...
<6>[10071.155527] [6:MHI_STATE_THREA: 4605] [process_WAKE_transition] Exited.
<6>[10071.158886] [5: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 5 link 1, ring type 2, index 0 db 0x5fa260c0
<6>[10071.158923] [5: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10071.158970] [6:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[10071.158995] [6:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[10071.159015] [6:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[10071.159591] [6:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[10071.162974] [5:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 d2 17 51 00 0e 00 14 06 00
<6>[10071.163645] [4:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 c0 19 4f 00 00 00
<6>[10071.177456] [7:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 c0 19 4f 00 15 00 02 04 00
<6>[10071.386275] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10071.386331] [6:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[10071.386360] [6:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[10071.386387] [6:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[10071.386587] [6:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[10071.632325] [0: thread_hotplug:19286] frequency info : 1000000, prev_cmd
0, exe_cmd 4
<6>[10071.632353] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10071.632368] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10072.312448] [2: kworker/u16:18:32540] vfsspi_work_func_debug ldo: 3, slee
p: 0, irq: 0, tz: 1, type: viper
<6>[10072.339151] [3: kworker/u16:18:32540] [SSP] debug_work_func: (61) - Senso
r state: 0x1fc3febf, RC: 1, CC: 0 DC: 0 TC: 0
<6>[10072.339213] [3: kworker/u16:18:32540] [SSP] 0 : 1813, 6808, 4145 (200ms,
0ms)
<6>[10072.339260] [3: kworker/u16:18:32540] [SSP] 9 : 42, 36, 42, 114, 245, 3 (
200ms)
<6>[10072.339299] [3: kworker/u16:18:32540] [SSP] 13 : 1(1ms)
<6>[10072.365465] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26110
<6>[10072.365631] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10072.365914] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2

<6>[10072.365966] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Entered


<6>[10072.366011] [2:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work was
cancelled
<6>[10072.369849] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[10072.370249] [0:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 d3 17 51 00 0e 00 14 06 00
<6>[10072.372353] [0:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 c1 19 4f 00 00 00
<6>[10072.378173] [0:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 c1 19 4f 00 15 00 02 04 00
<6>[10072.564807] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [P] tID:0 tc:1 tm
:0
<6>[10072.587230] [6: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10072.587353] [7:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[10072.587372] [7:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[10072.587395] [7:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[10072.587588] [7:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[10072.635950] [0: thread_hotplug:19286] frequency info : 800000, prev_cmd 0
, exe_cmd 4
<6>[10072.636012] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10072.636031] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10072.735569] [0: thread_hotplug:19286] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[10072.735625] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10072.735639] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10072.766733] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [R] tID:0 mc: 16
tc:0 Ver[005683000]
<6>[10072.835620] [0: thread_hotplug:19286] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[10072.835641] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10072.835653] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10073.335670] [0: thread_hotplug:19286] frequency info : 1000000, prev_cmd
0, exe_cmd 4
<6>[10073.335701] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10073.335717] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10073.523848] [2: irq/15-SSP_Int: 1775] [SSP] [M] AR-0,1704,6768,4088,180,2
0,0,0
<6>[10073.592283] [4: kworker/u16:18:32540] [mhi_initiate_m3] Entered MHI state
4, Pending M0 0 Pending M3 0
<6>[10073.592317] [4: kworker/u16:18:32540] [mhi_initiate_m3] Triggering wake o
ut of M2
<6>[10073.603461] [6: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26160
<6>[10073.603496] [6: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10073.603660] [7:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[10073.603686] [7:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[10073.603707] [7:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[10073.604390] [7:MHI_STATE_THREA: 4605] [process_M0_transition] Exited

<6>[10073.604516] [4: kworker/u16:18:32540] [mhi_initiate_m3] Cancelled M1 time


r, timer was active
<6>[10073.604596] [4: kworker/u16:18:32540] [mhi_initiate_m3] Waiting for M3 co
mpletion.
<6>[10073.613702] [6: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10073.613890] [7:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 5
<6>[10073.613916] [7:MHI_STATE_THREA: 4605] [process_M3_transition] Processing
M3 state transition
<6>[10073.614078] [4: kworker/u16:18:32540] [mhi_initiate_m3] M3 completion rec
eived
<6>[10073.614114] [4: kworker/u16:18:32540] [mhi_turn_off_pcie_link] Entered...
<6>[10073.625630] [4: kworker/u16:18:32540] mhi 0000:01:00.0: [debug] pmcsr reg
: b dev->current_state : 0
<6>[10073.625775] [4: kworker/u16:18:32540] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[10073.625859] [4: kworker/u16:18:32540] exynos-pcie 10ee0000.pcie0: ack mes
sage is ok
<6>[10073.625881] [4: kworker/u16:18:32540] exynos-pcie 10ee0000.pcie0: receive
d Enter_L23_READY DLLP packet
<6>[10073.625909] [4: kworker/u16:18:32540] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[10073.626045] [4: kworker/u16:18:32540] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[10073.639786] I[0:
swapper/0:
0] exynos-pcie 10ee0000.pcie0: cp2ap_w
ake irq involked
<6>[10073.639841] [0:
kworker/0:0:13589] exynos-pcie 10ee0000.pcie0: PCIe: W
ake work for RC0
<6>[10073.639866] [0:
kworker/0:0:13589] exynos-pcie 10ee0000.pcie0: Callbac
k for the event : 4
<6>[10073.639884] [0:
kworker/0:0:13589] [mhi_link_state_cb] Received MSM_PC
IE_EVENT_WAKE
<6>[10073.640048] [7:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 10
<6>[10073.640066] [7:MHI_STATE_THREA: 4605] [process_WAKE_transition] Entered
<6>[10073.656019] [4: kworker/u16:18:32540] [mhi_turn_off_pcie_link] Exited...
<6>[10073.656028] [7:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[10073.656041] [7:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, start of poweron, pcie state: 0
<6>[10073.695934] [7:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: D state
: 0, 75f700
<6>[10073.716670] [7:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_reset: Link up : 0x037dce11
<6>[10073.717064] [7:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, end of poweron, pcie state: 3
<6>[10073.729073] [7:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] pmcsr reg
: 8 dev->current_state : 3
<6>[10073.729247] [7:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[10073.729268] [7:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
y for the link of RC0
<6>[10073.729288] [7:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
config space of RC0 and its EP
<6>[10073.729307] [7:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
RC0
<6>[10073.729356] [7:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
EP of RC0
<6>[10073.729708] [7:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Refresh
ing the saved config space in PCI framework for RC0 and its EP

<6>[10073.735099] [7:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...


<6>[10073.735122] [7:MHI_STATE_THREA: 4605] [process_WAKE_transition] MHI is in
itialized, transitioning to M0.
<6>[10073.735142] [7:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Entered MHI state
5, Pending M0 0 Pending M3 0
<6>[10073.735164] [7:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Waiting for M0 M1
or M3. Currently 5...
<6>[10073.735184] [7:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Wait complete sta
te: 5
<6>[10073.735203] [7:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[10073.735220] [7:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[10073.735237] [7:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Setting M0 ...
<6>[10073.735449] [7:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Exited...
<6>[10073.735488] [7:MHI_STATE_THREA: 4605] [process_WAKE_transition] Exited.
<6>[10073.739295] [6: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 5 link 1, ring type 2, index 0 db 0x5fa26180
<6>[10073.739328] [6: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10073.739509] [7:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[10073.739534] [7:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[10073.739555] [7:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[10073.740168] [7:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[10073.743571] [4:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 d4 17 51 00 0e 00 14 06 00
<6>[10073.744580] [4:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 c2 19 4f 00 00 00
<6>[10073.758624] [4:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 c2 19 4f 00 15 00 02 04 00
<6>[10073.967924] [1: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10073.968206] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[10073.968262] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[10073.968324] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[10073.968559] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[10074.919765] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa261d0
<6>[10074.919845] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10074.920101] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[10074.920155] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[10074.920201] [2:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work was
cancelled
<6>[10074.924250] [1:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 d5 17 51 00 0e 00 14 06 00
<6>[10074.925155] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[10074.926095] [0:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 c3 19 4f 00 00 00
<6>[10074.933359] [1:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 c3 19 4f 00 15 00 02 04 00
<6>[10075.142306] [2: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10075.142363] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3

<6>[10075.142382] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Processing


M1 state transition from state 3
<6>[10075.142406] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[10075.142635] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[10076.145750] [2: kworker/u16:18:32540] [mhi_initiate_m3] Entered MHI state
4, Pending M0 0 Pending M3 0
<6>[10076.145835] [2: kworker/u16:18:32540] [mhi_initiate_m3] Triggering wake o
ut of M2
<6>[10076.156759] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26220
<6>[10076.156823] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10076.157070] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[10076.157125] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[10076.157170] [2:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[10076.161286] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[10076.161489] [3: kworker/u16:18:32540] [mhi_initiate_m3] Cancelled M1 time
r, timer was active
<6>[10076.161741] [3: kworker/u16:18:32540] [mhi_initiate_m3] Waiting for M3 co
mpletion.
<6>[10076.175037] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10076.175307] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 5
<6>[10076.175359] [2:MHI_STATE_THREA: 4605] [process_M3_transition] Processing
M3 state transition
<6>[10076.175588] [3: kworker/u16:18:32540] [mhi_initiate_m3] M3 completion rec
eived
<6>[10076.175658] [3: kworker/u16:18:32540] [mhi_turn_off_pcie_link] Entered...
<6>[10076.189236] [3: kworker/u16:18:32540] mhi 0000:01:00.0: [debug] pmcsr reg
: b dev->current_state : 0
<6>[10076.189427] [3: kworker/u16:18:32540] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[10076.189545] [3: kworker/u16:18:32540] exynos-pcie 10ee0000.pcie0: ack mes
sage is ok
<6>[10076.189591] [3: kworker/u16:18:32540] exynos-pcie 10ee0000.pcie0: receive
d Enter_L23_READY DLLP packet
<6>[10076.189646] [3: kworker/u16:18:32540] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[10076.189826] [3: kworker/u16:18:32540] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[10076.200062] I[0:
swapper/0:
0] exynos-pcie 10ee0000.pcie0: cp2ap_w
ake irq involked
<6>[10076.200173] [0:
kworker/0:0:13589] exynos-pcie 10ee0000.pcie0: PCIe: W
ake work for RC0
<6>[10076.200230] [0:
kworker/0:0:13589] exynos-pcie 10ee0000.pcie0: Callbac
k for the event : 4
<6>[10076.200272] [0:
kworker/0:0:13589] [mhi_link_state_cb] Received MSM_PC
IE_EVENT_WAKE
<6>[10076.200571] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 10
<6>[10076.200622] [2:MHI_STATE_THREA: 4605] [process_WAKE_transition] Entered
<6>[10076.219848] [3: kworker/u16:18:32540] [mhi_turn_off_pcie_link] Exited...
<6>[10076.219960] [2:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[10076.219995] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, start of poweron, pcie state: 0

<6>[10076.259506] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: D state


: 0, 105200
<6>[10076.280834] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_reset: Link up : 0x03d55e11
<6>[10076.281342] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, end of poweron, pcie state: 3
<6>[10076.293140] [3:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] pmcsr reg
: 8 dev->current_state : 3
<6>[10076.293460] [3:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[10076.293514] [3:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
y for the link of RC0
<6>[10076.293559] [3:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
config space of RC0 and its EP
<6>[10076.293602] [3:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
RC0
<6>[10076.293745] [3:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
EP of RC0
<6>[10076.294179] [3:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Refresh
ing the saved config space in PCI framework for RC0 and its EP
<6>[10076.300952] [3:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[10076.301023] [3:MHI_STATE_THREA: 4605] [process_WAKE_transition] MHI is in
itialized, transitioning to M0.
<6>[10076.301070] [3:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Entered MHI state
5, Pending M0 0 Pending M3 0
<6>[10076.301117] [3:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Waiting for M0 M1
or M3. Currently 5...
<6>[10076.301163] [3:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Wait complete sta
te: 5
<6>[10076.301208] [3:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[10076.301247] [3:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[10076.301288] [3:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Setting M0 ...
<6>[10076.301523] [3:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Exited...
<6>[10076.301563] [3:MHI_STATE_THREA: 4605] [process_WAKE_transition] Exited.
<6>[10076.303292] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 5 link 1, ring type 2, index 0 db 0x5fa26240
<6>[10076.303366] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10076.303616] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[10076.303668] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[10076.303712] [0:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[10076.307753] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[10076.307808] [1:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 d6 17 51 00 0e 00 14 06 00
<6>[10076.313834] [3:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 c4 19 4f 00 00 00
<6>[10076.327813] [1:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 c4 19 4f 00 15 00 02 04 00
<6>[10076.537090] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10076.537347] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[10076.537401] [0:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[10076.537461] [0:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[10076.537697] [0:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work

<6>[10077.099957] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [P] tID:0 tc:1 tm


:0
<6>[10077.155627] [0: thread_hotplug:19286] frequency info : 800000, prev_cmd 0
, exe_cmd 4
<6>[10077.155660] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10077.155679] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10077.229960] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [R] tID:0 mc: 10
tc:0 Ver[005683000]
<6>[10077.255502] [0: thread_hotplug:19286] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[10077.255522] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10077.255534] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10077.473726] [2: irq/15-SSP_Int: 1775] [SSP] [M] AR-0,1461,6807,4212,180,2
0,0,0
<6>[10077.538837] [6: kworker/u16:18:32540] [mhi_initiate_m3] Entered MHI state
4, Pending M0 0 Pending M3 0
<6>[10077.538872] [6: kworker/u16:18:32540] [mhi_initiate_m3] Triggering wake o
ut of M2
<6>[10077.540588] [6: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26290
<6>[10077.540619] [6: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10077.540750] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[10077.540772] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[10077.540786] [0:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[10077.542037] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[10077.542055] [6: kworker/u16:18:32540] [mhi_initiate_m3] Cancelled M1 time
r, timer was active
<6>[10077.542247] [6: kworker/u16:18:32540] [mhi_initiate_m3] Waiting for M3 co
mpletion.
<6>[10077.550992] [6: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10077.551042] [7:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 5
<6>[10077.551071] [7:MHI_STATE_THREA: 4605] [process_M3_transition] Processing
M3 state transition
<6>[10077.551111] [6: kworker/u16:18:32540] [mhi_initiate_m3] M3 completion rec
eived
<6>[10077.551139] [6: kworker/u16:18:32540] [mhi_turn_off_pcie_link] Entered...
<6>[10077.562301] [7: kworker/u16:18:32540] mhi 0000:01:00.0: [debug] pmcsr reg
: b dev->current_state : 0
<6>[10077.562444] [7: kworker/u16:18:32540] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[10077.562525] [7: kworker/u16:18:32540] exynos-pcie 10ee0000.pcie0: ack mes
sage is ok
<6>[10077.562546] [7: kworker/u16:18:32540] exynos-pcie 10ee0000.pcie0: receive
d Enter_L23_READY DLLP packet
<6>[10077.562575] [7: kworker/u16:18:32540] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[10077.562677] [7: kworker/u16:18:32540] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[10077.592652] [7: kworker/u16:18:32540] [mhi_turn_off_pcie_link] Exited...
<6>[10077.755703] [0: thread_hotplug:19286] frequency info : 1000000, prev_cmd
0, exe_cmd 4
<6>[10077.755731] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0

<6>[10077.755747] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0


<6>[10078.116219] [0:
kworker/0:0:13589] [Time-to-FULL] 368634(secs), 6143(m
ins)
<6>[10078.116605] [0:
kworker/0:0:13589] [Time-to-EMPTY] 19957(secs), 332(mi
ns)
<6>[10078.153581] [0:
kworker/0:0:13589] [FG] 0080h,ffa5h,7f80h,ff01h,1900h,
0f49h,5a48h,53b1h,1c80h,ca28h,f59bh,f786h,00f3h,5418h,5be8h,0fa2h,1070h,0ddch,33
80h,5c00h,05d4h,0148h,1c13h,5c1ch,1439h,cc01h,2c0fh,da96h,41a5h,0314h,0320h,0eb0
h,ffffh,20b0h,2000h,127ch,1400h,2305h,1c13h,8078h,2472h,cea4h,203bh,09d0h,e3e1h,
290eh,0400h,0000h,68a6h,47d0h,1603h,0241h,0000h,10eeh,ebc8h,05e0h,0050h,1a45h,7d
54h,f786h,1680h,1008h,5896h,e000h,0000h,a900h,1005h,0000h,cc53h,0a8bh,7210h,0021
h,5df9h,2271h,0f9bh,0000h,d90dh,d750h,edc5h,0000h,0000h,0000h,7f80h,0000h,0000h,
0005h,011ah,05e4h,0000h,006bh,090ch,0050h,0faeh,0204h,094dh,0000h,039eh,100fh,0c
0eh,0c0dh,0c0ch,0c0bh,0c0ah,0c09h,0c08h,a516h,4350h,0010h,0064h,ffffh,5c26h,0f3e
h,0a8dh,f77fh,0fa2h,0007h,4488h,0002h,0fa2h,0000h,4c50h,fffch,4170h,0000h,4000h,
0000h,acf0h,0620h,0000h,0000h,0000h,0000h,23ffh,0000h,0040h,f5a6h,403ch,54c9h,fc
38h,d205h,0049h,2910h,ca28h,53f7h,
<7>[10078.155147] [0:
kworker/0:0:13589] max77843_fg_write_temp: temperature
to (288, 0x1ccd)
<6>[10078.155636] [0:
kworker/0:0:13589] max77843_fg_check_qrtable: QRTABLE2
0_REG(0x1603), QRTABLE30_REG(0x1005)
<6>[10078.157863] [0:
kworker/0:0:13589] max77843_fg_read_vcell: VCELL(4043)
, data(0xca28)
<7>[10078.158767] [0:
kworker/0:0:13589] max77843_get_fuelgauge_soc: soc(902
), low_batt_alarm(0)
<6>[10078.158808] [0:
kworker/0:0:13589] sec_bat_get_property cable type = 1
sleep_mode = 0
<7>[10078.159071] [0:
kworker/0:0:13589] max77843_chg_get_property : set-cur
rent(0mA), current now(433mA)
<6>[10078.159875] [0:
kworker/0:0:13589] max77843_fg_get_scaled_capacity : C
ABLE TYPE(1) INPUT CURRENT(433) CHARGINGE MODE(NONE)
<7>[10078.159894] [0:
kworker/0:0:13589] max77843_fg_get_scaled_capacity: ca
pacity_max (926)
<6>[10078.160133] [0:
kworker/0:0:13589] max77843_fg_get_scaled_capacity: sc
aled capacity (97.4)
<6>[10078.160152] [0:
kworker/0:0:13589] max77843_fg_get_atomic_capacity : N
OW(97), OLD(97)
<6>[10078.160183] [0:
kworker/0:0:13589] sec-battery battery.51: sec_bat_get
_battery_info:Vnow(4043mV),Inow(-415mA),Isysnow(-1mA),Imax(460mA),SOC(97%),Tbat(
288),Tchg(310),Twpc(0),is_hc_usb(0)
<6>[10078.160206] [0:
kworker/0:0:13589] sec-battery battery.51: Connected,V
avg(4080mV),Vocv(4200mV),Tamb(288),Iavg(-340mA),Isysavg(-1mA),Iadc(0)
<6>[10078.161003] [0:
kworker/0:0:13589] sdchg_ic_use_adc_check : SELF_DISCH
ARGING(0) SELF_DISCHARGING_ADC(0)
<6>[10078.161026] [0:
kworker/0:0:13589] sec-battery battery.51: sdchg_ic_us
e_discharging_check: Auto_DIS(0), Force_DIS(0)
<6>[10078.161276] [0:
kworker/0:0:13589] max77843_get_float_voltage: battery
cv voltage 0x1d, chg_float_voltage = 4350mV
<6>[10078.161306] [0:
kworker/0:0:13589] sec_bat_swelling_check: status(2),
swell_mode(0:1), cv(0x1d), temp(288)
<6>[10078.161323] [0:
kworker/0:0:13589] sec_bat_swelling_check: DISCHARGING
or NOT-CHARGING. stop swelling mode
<6>[10078.161348] [0:
kworker/0:0:13589] sec-battery battery.51: sec_bat_mon
itor_work: Status(Discharging), mode(None), Health(Good), Cable(1), level(70%),
HV(NONE), Cycle(599)
<6>[10078.161380] [0:
kworker/0:0:13589] power_supply battery: power_supply_
changed
<6>[10078.161468] [0:
kworker/0:0:13589] sec_bat_get_property cable type = 1
sleep_mode = 0
<6>[10078.161495] [0:
kworker/0:0:13589] sec_bat_get_property cable type = 1

<6>[10078.167051] [6:
healthd: 3346] sec_bat_get_property cable type = 1
sleep_mode = 0
<12>[10078.167990] [6:
healthd: 3346] healthd: battery l=97 v=4043 t=28.
8 h=2 st=3 c=0 o=1 ca=-340 ct=0 ps=0 chg= 2016-11-17 16:23:38.772087391 UTC
<12>[10078.168036] [6:
healthd: 3346] healthd: battery l=97 v=4043 t=28.
8 h=2 st=3 c=0 o=1 ca=-340 ct=0 ps=0 chg= 2016-11-17 16:23:38.772087391 UTC hv=0
sec=0 chg=
<14>[10078.168066] [6:
healthd: 3346] healthd-android: healthd_mode_andr
oid_battery_update
<14>[10078.168094] [6:
healthd: 3346] BatteryPropertiesRegistrar: notify
Listeners : start
<14>[10078.168122] [6:
healthd: 3346] IBatteryPropertiesListener : batte
ryPropertiesChanged!
<14>[10078.168122] [6:
healthd: 3346] : BatteryPropertiesRegistrar: noti
fyListeners : done
<6>[10078.760545] I[0: cfinteractive0:19282] exynos-pcie 10ee0000.pcie0: cp2ap_w
ake irq involked
<6>[10078.760678] [0:
kworker/0:0:13589] exynos-pcie 10ee0000.pcie0: PCIe: W
ake work for RC0
<6>[10078.760770] [0:
kworker/0:0:13589] exynos-pcie 10ee0000.pcie0: Callbac
k for the event : 4
<6>[10078.760846] [0:
kworker/0:0:13589] [mhi_link_state_cb] Received MSM_PC
IE_EVENT_WAKE
<6>[10078.761507] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 10
<6>[10078.761550] [1:MHI_STATE_THREA: 4605] [process_WAKE_transition] Entered
<6>[10078.761586] [1:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[10078.761630] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, start of poweron, pcie state: 0
<6>[10078.799358] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: D state
: 0, 8f4e00
<6>[10078.816165] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_reset: Link up : 0x03312711
<6>[10078.816568] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, end of poweron, pcie state: 3
<6>[10078.832478] [2:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] pmcsr reg
: 8 dev->current_state : 3
<6>[10078.832630] [2:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[10078.832662] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
y for the link of RC0
<6>[10078.832685] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
config space of RC0 and its EP
<6>[10078.832706] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
RC0
<6>[10078.832761] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
EP of RC0
<6>[10078.833286] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Refresh
ing the saved config space in PCI framework for RC0 and its EP
<6>[10078.838651] [2:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[10078.838702] [2:MHI_STATE_THREA: 4605] [process_WAKE_transition] MHI is in
itialized, transitioning to M0.
<6>[10078.838726] [2:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Entered MHI state
5, Pending M0 0 Pending M3 0
<6>[10078.838750] [2:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Waiting for M0 M1
or M3. Currently 5...
<6>[10078.838773] [2:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Wait complete sta
te: 5
<6>[10078.838847] [2:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...

<6>[10078.838869] [2:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...


<6>[10078.838891] [2:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Setting M0 ...
<6>[10078.839096] [2:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Exited...
<6>[10078.839117] [2:MHI_STATE_THREA: 4605] [process_WAKE_transition] Exited.
<6>[10078.841988] [2: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 5 link 1, ring type 2, index 0 db 0x5fa262b0
<6>[10078.842029] [2: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10078.842255] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[10078.842280] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[10078.842302] [0:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[10078.842978] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[10078.846008] [1:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 d7 17 51 00 0e 00 14 06 00
<6>[10078.847304] [2:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 c5 19 4f 00 00 00
<6>[10078.860750] [2:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 c5 19 4f 00 15 00 02 04 00
<6>[10079.070039] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10079.070336] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[10079.070394] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[10079.070452] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[10079.070685] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[10079.509553] [2:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 c6 19 43 00 00 00
<6>[10079.511485] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26300
<6>[10079.511523] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10079.511678] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[10079.511708] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[10079.511738] [1:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work was
cancelled
<6>[10079.513099] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[10079.523677] [2:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 a9
00 80 03 01 02 c6 19 43 00 9d 00 02 04 00
<6>[10079.556073] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [P] tID:0 tc:1 tm
:0
<6>[10079.562307] [0: thread_hotplug:19286] frequency info : 400000, prev_cmd 0
, exe_cmd 4
<6>[10079.562365] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10079.562403] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10079.624797] [5: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10079.624928] [4:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[10079.624946] [4:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[10079.624966] [4:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[10079.625160] [4:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3

deferred work
<6>[10079.626690] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [R] tID:0 mc: 5 t
c:0 Ver[005683000]
<6>[10079.763915] [0: thread_hotplug:19286] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[10079.763938] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10079.763950] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10080.168964] [2: irq/15-SSP_Int: 1775] [SSP] [M] PD: BaroDisabled
<6>[10080.625789] [2: kworker/u16:1:32448] [mhi_initiate_m3] Entered MHI state
4, Pending M0 0 Pending M3 0
<6>[10080.625830] [2: kworker/u16:1:32448] [mhi_initiate_m3] Triggering wake o
ut of M2
<6>[10080.636546] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26340
<6>[10080.636602] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10080.636799] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[10080.636836] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[10080.636867] [0:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[10080.637797] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[10080.637953] [2: kworker/u16:1:32448] [mhi_initiate_m3] Cancelled M1 time
r, timer was active
<6>[10080.638136] [2: kworker/u16:1:32448] [mhi_initiate_m3] Waiting for M3 co
mpletion.
<6>[10080.646463] [0: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10080.646778] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 5
<6>[10080.646829] [1:MHI_STATE_THREA: 4605] [process_M3_transition] Processing
M3 state transition
<6>[10080.646931] [0: kworker/u16:1:32448] [mhi_initiate_m3] M3 completion rec
eived
<6>[10080.647040] [0: kworker/u16:1:32448] [mhi_turn_off_pcie_link] Entered...
<6>[10080.659463] [0: kworker/u16:1:32448] mhi 0000:01:00.0: [debug] pmcsr reg
: b dev->current_state : 0
<6>[10080.659772] [0: kworker/u16:1:32448] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[10080.660006] [0: kworker/u16:1:32448] exynos-pcie 10ee0000.pcie0: ack mes
sage is ok
<6>[10080.660113] [0: kworker/u16:1:32448] exynos-pcie 10ee0000.pcie0: receive
d Enter_L23_READY DLLP packet
<6>[10080.660198] [0: kworker/u16:1:32448] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[10080.660557] [0: kworker/u16:1:32448] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[10080.691267] [1: kworker/u16:1:32448] [mhi_turn_off_pcie_link] Exited...
<6>[10081.606667] [2: irq/15-SSP_Int: 1775] [SSP] [M] AR-0,1186,6782,4390,180,2
0,0,0
<6>[10081.964952] [2: irq/15-SSP_Int: 1775] [SSP] [M] ACVH 1 0 0 1 0 0
<6>[10081.964952] [2: irq/15-SSP_Int: 1775]
<6>[10082.600090] I[0:
swapper/0:
0] exynos-pcie 10ee0000.pcie0: cp2ap_w
ake irq involked
<6>[10082.600154] [0:
kworker/0:0:13589] exynos-pcie 10ee0000.pcie0: PCIe: W
ake work for RC0
<6>[10082.600177] [0:
kworker/0:0:13589] exynos-pcie 10ee0000.pcie0: Callbac
k for the event : 4
<6>[10082.600193] [0:
kworker/0:0:13589] [mhi_link_state_cb] Received MSM_PC

IE_EVENT_WAKE
<6>[10082.600346] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 10
<6>[10082.600367] [1:MHI_STATE_THREA: 4605] [process_WAKE_transition] Entered
<6>[10082.600384] [1:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[10082.600406] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, start of poweron, pcie state: 0
<6>[10082.640769] [3:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: D state
: 0, c95a00
<6>[10082.656787] [0:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_reset: Link up : 0x03fe7d11
<6>[10082.657150] [0:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, end of poweron, pcie state: 3
<6>[10082.669239] [1:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] pmcsr reg
: 8 dev->current_state : 3
<6>[10082.669396] [1:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[10082.669434] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
y for the link of RC0
<6>[10082.669464] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
config space of RC0 and its EP
<6>[10082.669492] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
RC0
<6>[10082.669556] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
EP of RC0
<6>[10082.670056] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Refresh
ing the saved config space in PCI framework for RC0 and its EP
<6>[10082.675443] [1:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[10082.675529] [1:MHI_STATE_THREA: 4605] [process_WAKE_transition] MHI is in
itialized, transitioning to M0.
<6>[10082.675566] [1:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Entered MHI state
5, Pending M0 0 Pending M3 0
<6>[10082.675599] [1:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Waiting for M0 M1
or M3. Currently 5...
<6>[10082.675629] [1:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Wait complete sta
te: 5
<6>[10082.675657] [1:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[10082.675685] [1:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[10082.675712] [1:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Setting M0 ...
<6>[10082.675924] [1:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Exited...
<6>[10082.675951] [1:MHI_STATE_THREA: 4605] [process_WAKE_transition] Exited.
<6>[10082.679761] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 5 link 1, ring type 2, index 0 db 0x5fa26360
<6>[10082.679832] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10082.680075] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[10082.680127] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[10082.680172] [1:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[10082.683999] [2:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 d8 17 51 00 0e 00 14 06 00
<6>[10082.684338] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[10082.685756] [3:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 c7 19 4f 00 00 00
<6>[10082.698542] [1:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 c7 19 4f 00 15 00 02 04 00
<6>[10082.907706] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10082.907984] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni

ng to 3
<6>[10082.908035] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[10082.908097] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[10082.908330] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[10083.042008] [2: irq/15-SSP_Int: 1775] [SSP] [M] PD: R->W
<6>[10083.221690] [2: irq/15-SSP_Int: 1775] [SSP] [M] save bak odr 0, 1, 20, 20
, 0
<6>[10083.221690] [2: irq/15-SSP_Int: 1775] save bak odr 0, 0, 20, 20, 0
<6>[10083.221690] [2: irq/15-SSP_Int: 1775] AD 0 7 1 6, 60
<6>[10083.221690] [2: irq/15-SSP_Int: 1775] save bak odr 0, 1, 20, 20, 0
<6>[10083.221690] [2: irq/15-SSP_Int: 1775] save bak odr 0, 0, 20, 20, 0
<6>[10083.221690] [2: irq/15-SSP_Int: 1775] RM 0 6 1 5 20
<6>[10083.325800] [1: kworker/u16:18:32540] [SSP] debug_work_func: (61) - Senso
r state: 0x1fc3febf, RC: 1, CC: 0 DC: 0 TC: 0
<6>[10083.325866] [1: kworker/u16:18:32540] [SSP] 0 : 1201, 6740, 4406 (200ms,
0ms)
<6>[10083.325913] [1: kworker/u16:18:32540] [SSP] 9 : 32, 25, 28, 82, 245, 3 (2
00ms)
<6>[10083.325953] [1: kworker/u16:18:32540] [SSP] 13 : 1(1ms)
<6>[10083.329095] [2: kworker/u16:18:32540] vfsspi_work_func_debug ldo: 3, slee
p: 0, irq: 0, tz: 1, type: viper
<6>[10083.880112] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa263b0
<6>[10083.880195] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10083.880456] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[10083.880508] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[10083.880554] [1:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work was
cancelled
<6>[10083.884515] [2:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 d9 17 51 00 0e 00 14 06 00
<6>[10083.885228] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[10083.888362] [3:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 c8 19 4f 00 00 00
<6>[10083.893876] [2:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 c8 19 4f 00 15 00 02 04 00
<6>[10083.938924] [2: irq/15-SSP_Int: 1775] [SSP] [M] ACVH 1 0 0 0 0 0
<6>[10083.938924] [2: irq/15-SSP_Int: 1775]
<6>[10084.102950] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10084.103196] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[10084.103251] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[10084.103313] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[10084.103549] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[10085.105723] [1: kworker/u16:18:32540] [mhi_initiate_m3] Entered MHI state
4, Pending M0 0 Pending M3 0
<6>[10085.105808] [1: kworker/u16:18:32540] [mhi_initiate_m3] Triggering wake o
ut of M2
<6>[10085.107770] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26400
<6>[10085.107830] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0

<6>[10085.108051] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni


ng to 2
<6>[10085.108104] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[10085.108151] [1:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[10085.111692] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[10085.111777] [2: kworker/u16:18:32540] [mhi_initiate_m3] Cancelled M1 time
r, timer was active
<6>[10085.112023] [2: kworker/u16:18:32540] [mhi_initiate_m3] Waiting for M3 co
mpletion.
<6>[10085.125603] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10085.125897] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 5
<6>[10085.125954] [1:MHI_STATE_THREA: 4605] [process_M3_transition] Processing
M3 state transition
<6>[10085.126163] [2: kworker/u16:18:32540] [mhi_initiate_m3] M3 completion rec
eived
<6>[10085.126236] [2: kworker/u16:18:32540] [mhi_turn_off_pcie_link] Entered...
<6>[10085.139201] [2: kworker/u16:18:32540] mhi 0000:01:00.0: [debug] pmcsr reg
: b dev->current_state : 0
<6>[10085.139393] [2: kworker/u16:18:32540] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[10085.139509] [2: kworker/u16:18:32540] exynos-pcie 10ee0000.pcie0: ack mes
sage is ok
<6>[10085.139556] [2: kworker/u16:18:32540] exynos-pcie 10ee0000.pcie0: receive
d Enter_L23_READY DLLP packet
<6>[10085.139611] [2: kworker/u16:18:32540] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[10085.139790] [2: kworker/u16:18:32540] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[10085.154499] I[0:
swapper/0:
0] exynos-pcie 10ee0000.pcie0: cp2ap_w
ake irq involked
<6>[10085.154629] [0:
kworker/0:0:13589] exynos-pcie 10ee0000.pcie0: PCIe: W
ake work for RC0
<6>[10085.154688] [0:
kworker/0:0:13589] exynos-pcie 10ee0000.pcie0: Callbac
k for the event : 4
<6>[10085.154731] [0:
kworker/0:0:13589] [mhi_link_state_cb] Received MSM_PC
IE_EVENT_WAKE
<6>[10085.154987] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 10
<6>[10085.155038] [1:MHI_STATE_THREA: 4605] [process_WAKE_transition] Entered
<6>[10085.169809] [2: kworker/u16:18:32540] [mhi_turn_off_pcie_link] Exited...
<6>[10085.169902] [1:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[10085.169936] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, start of poweron, pcie state: 0
<6>[10085.209507] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: D state
: 0, 57ef00
<6>[10085.229691] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_reset: Link up : 0x03059811
<6>[10085.230179] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, end of poweron, pcie state: 3
<6>[10085.242550] [1:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] pmcsr reg
: 8 dev->current_state : 3
<6>[10085.242717] [1:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[10085.242767] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
y for the link of RC0
<6>[10085.242813] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
config space of RC0 and its EP

<6>[10085.242855] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover


RC0
<6>[10085.242944] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
EP of RC0
<6>[10085.243408] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Refresh
ing the saved config space in PCI framework for RC0 and its EP
<6>[10085.248761] [1:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[10085.248855] [1:MHI_STATE_THREA: 4605] [process_WAKE_transition] MHI is in
itialized, transitioning to M0.
<6>[10085.248906] [1:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Entered MHI state
5, Pending M0 0 Pending M3 0
<6>[10085.248954] [1:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Waiting for M0 M1
or M3. Currently 5...
<6>[10085.248998] [1:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Wait complete sta
te: 5
<6>[10085.249042] [1:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[10085.249082] [1:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[10085.249125] [1:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Setting M0 ...
<6>[10085.249357] [1:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Exited...
<6>[10085.249399] [1:MHI_STATE_THREA: 4605] [process_WAKE_transition] Exited.
<6>[10085.252634] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 5 link 1, ring type 2, index 0 db 0x5fa26420
<6>[10085.252694] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10085.252914] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[10085.252967] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[10085.253011] [1:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[10085.256912] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[10085.257170] [2:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 da 17 51 00 0e 00 14 06 00
<6>[10085.259155] [3:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 c9 19 4f 00 00 00
<6>[10085.274034] [2:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 c9 19 4f 00 15 00 02 04 00
<6>[10085.483347] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10085.483624] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[10085.483681] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[10085.483738] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[10085.483971] [1:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[10085.555573] [2: irq/15-SSP_Int: 1775] [SSP] [M] AR-0,1158,6674,4689,180,2
0,0,0
<6>[10086.485708] [1: kworker/u16:18:32540] [mhi_initiate_m3] Entered MHI state
4, Pending M0 0 Pending M3 0
<6>[10086.485788] [1: kworker/u16:18:32540] [mhi_initiate_m3] Triggering wake o
ut of M2
<6>[10086.487756] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26470
<6>[10086.487817] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10086.488045] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[10086.488098] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[10086.488143] [1:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT

cancelled, either running or never started


<6>[10086.492278] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[10086.492407] [2: kworker/u16:18:32540] [mhi_initiate_m3] Cancelled M1 time
r, timer was active
<6>[10086.492651] [2: kworker/u16:18:32540] [mhi_initiate_m3] Waiting for M3 co
mpletion.
<6>[10086.505729] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10086.505986] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 5
<6>[10086.506038] [1:MHI_STATE_THREA: 4605] [process_M3_transition] Processing
M3 state transition
<6>[10086.506264] [3: kworker/u16:18:32540] [mhi_initiate_m3] M3 completion rec
eived
<6>[10086.506331] [3: kworker/u16:18:32540] [mhi_turn_off_pcie_link] Entered...
<6>[10086.519140] [3: kworker/u16:18:32540] mhi 0000:01:00.0: [debug] pmcsr reg
: b dev->current_state : 0
<6>[10086.519343] [3: kworker/u16:18:32540] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[10086.519459] [3: kworker/u16:18:32540] exynos-pcie 10ee0000.pcie0: ack mes
sage is ok
<6>[10086.519504] [3: kworker/u16:18:32540] exynos-pcie 10ee0000.pcie0: receive
d Enter_L23_READY DLLP packet
<6>[10086.519560] [3: kworker/u16:18:32540] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[10086.519733] [3: kworker/u16:18:32540] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[10086.549737] [3: kworker/u16:18:32540] [mhi_turn_off_pcie_link] Exited...
<6>[10087.720864] I[0:
swapper/0:
0] exynos-pcie 10ee0000.pcie0: cp2ap_w
ake irq involked
<6>[10087.721033] [0:
kworker/0:0:13589] exynos-pcie 10ee0000.pcie0: PCIe: W
ake work for RC0
<6>[10087.721090] [0:
kworker/0:0:13589] exynos-pcie 10ee0000.pcie0: Callbac
k for the event : 4
<6>[10087.721133] [0:
kworker/0:0:13589] [mhi_link_state_cb] Received MSM_PC
IE_EVENT_WAKE
<6>[10087.721418] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 10
<6>[10087.721469] [1:MHI_STATE_THREA: 4605] [process_WAKE_transition] Entered
<6>[10087.721514] [1:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[10087.721567] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, start of poweron, pcie state: 0
<6>[10087.759474] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: D state
: 0, 29c100
<6>[10087.779951] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_reset: Link up : 0x035fd111
<6>[10087.780445] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, end of poweron, pcie state: 3
<6>[10087.792624] [2:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] pmcsr reg
: 8 dev->current_state : 3
<6>[10087.792794] [2:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[10087.792848] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
y for the link of RC0
<6>[10087.792893] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
config space of RC0 and its EP
<6>[10087.792936] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
RC0
<6>[10087.793023] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
EP of RC0

<6>[10087.793486] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Refresh


ing the saved config space in PCI framework for RC0 and its EP
<6>[10087.799033] [2:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[10087.799093] [2:MHI_STATE_THREA: 4605] [process_WAKE_transition] MHI is in
itialized, transitioning to M0.
<6>[10087.799142] [2:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Entered MHI state
5, Pending M0 0 Pending M3 0
<6>[10087.799190] [2:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Waiting for M0 M1
or M3. Currently 5...
<6>[10087.799236] [2:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Wait complete sta
te: 5
<6>[10087.799278] [2:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[10087.799319] [2:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[10087.799361] [2:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Setting M0 ...
<6>[10087.799593] [2:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Exited...
<6>[10087.799635] [2:MHI_STATE_THREA: 4605] [process_WAKE_transition] Exited.
<6>[10087.802833] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 5 link 1, ring type 2, index 0 db 0x5fa26490
<6>[10087.802895] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10087.803126] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[10087.803178] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[10087.803225] [2:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[10087.807348] [0:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 db 17 51 00 0e 00 14 06 00
<6>[10087.807609] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[10087.809252] [1:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 ca 19 4f 00 00 00
<6>[10087.823107] [2:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 ca 19 4f 00 15 00 02 04 00
<6>[10088.032354] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10088.032646] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[10088.032702] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[10088.032762] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[10088.032997] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<7>[10088.742031] [0:companionshotTh:21972] [@][0][COM:V] fimc_is_comp_video_op
en
<7>[10088.743786] [0:companionshotTh:21972] [@][COM:D] fimc_is_companion_runtim
e_resume(0)
<7>[10088.743886] [0:companionshotTh:21972] [@][RSC] rsctype : 3, rsccount : 1
<7>[10088.744216] [0:companionshotTh:21972] [@][0][COM:D] fimc_is_companion_ope
n():0
<6>[10088.747378] [0:companionshotTh:21972] sclk_isp_sensor1 : 24Mhz
<6>[10088.747408] [0:companionshotTh:21972] exynos7420_fimc_is_companion_mclk_o
n(1, mclk : 24000000)
<7>[10088.747486] [3: kworker/u16:18:32540] [@] pin_ctrl(act(5), pin(0), val(1)
, nm(OIS_VDD_2.8V)
<7>[10088.747507] [3: kworker/u16:18:32540] [@] pin_ctrl(act(5), pin(0), val(1)
, nm(OIS_VM_2.8V)
<7>[10088.747526] [3: kworker/u16:18:32540] [@] pin_ctrl(act(1), pin(54), val(0
), nm(standby_low)
<7>[10088.747544] [3: kworker/u16:18:32540] [@] pin_ctrl(act(1), pin(52), val(0
), nm(rst_low)

<7>[10088.747561] [3: kworker/u16:18:32540] [@] pin_ctrl(act(5), pin(0), val(1)


, nm(VDDA_2.9V_VT)
<7>[10088.747579] [3: kworker/u16:18:32540] [@] pin_ctrl(act(5), pin(0), val(1)
, nm(VDDIO_1.8V_VT)
<7>[10088.747596] [3: kworker/u16:18:32540] [@] pin_ctrl(act(5), pin(0), val(1)
, nm(VDDD_1.2V_VT)
<7>[10088.747614] [3: kworker/u16:18:32540] [@] pin_ctrl(act(5), pin(0), val(1)
, nm(VDDIO_1.8V_CAM)
<7>[10088.757834] [0:companionshotTh:21972] [@][fimc_is_power_binning::1391][BI
N_INFO::4, sel 4] read path(/data/camera/ISP_CV), DCDC PMIC(0.750V)
<7>[10088.757870] [0:companionshotTh:21972] [@] pin_ctrl(act(5), pin(0), val(1)
, nm(VDDD_RET_1.0V_COMP)
<7>[10088.757888] [0:companionshotTh:21972] [@] pin_ctrl(act(5), pin(0), val(1)
, nm(VDDA_1.8V_COMP)
<7>[10088.757906] [0:companionshotTh:21972] [@] pin_ctrl(act(5), pin(0), val(1)
, nm(VDDD_CORE_1.0V_COMP)
<7>[10088.757924] [0:companionshotTh:21972] [@] pin_ctrl(act(5), pin(0), val(1)
, nm(VDDD_NORET_0.9V_COMP)
<7>[10088.757941] [0:companionshotTh:21972] [@] pin_ctrl(act(5), pin(0), val(1)
, nm(VDDD_CORE_0.8V_COMP)
<6>[10088.758070] [0:companionshotTh:21972] exynos_fimc_is_module_pin_control :
regulator_set_voltage(1000000)
<4>[10088.760224] [2:companionshotTh:21972] VDDD_RET_1.0V_COMP regulator is alr
eady enabled
<7>[10088.766956] [0:companionshotTh:21972] [@]workQueue is waited 0 times
<7>[10088.766993] [0:companionshotTh:21972] [@] pin_ctrl(act(1), pin(52), val(1
), nm(rst_high)
<7>[10088.767012] [0:companionshotTh:21972] [@] pin_ctrl(act(4), pin(0), val(2)
, nm(pin)
<7>[10088.767030] [0:companionshotTh:21972] [@] pin_ctrl(act(1), pin(55), val(1
), nm(comp_rst high)
<7>[10088.772345] [2:companionshotTh:21972] [@]already loaded the firmware, Pho
ne_Comp version=A16LSIJ0111, F-ROM_Comp version=A16LSIA0001
<7>[10088.773654] [2:companionshotTh:21972] [@]Companion validation: 0x73c2
<7>[10088.773678] [2:companionshotTh:21972] [@]fimc_is_comp_retention: start
<7>[10088.775209] [2:companionshotTh:21972] [@]0x0002 signature is same!
<7>[10088.781580] [2:companionshotTh:21972] [@]signature crc check success!
<7>[10088.784491] [3:companionshotTh:21972] [@]0x0002 signature is same!
<7>[10088.784800] [3:companionshotTh:21972] [@]fimc_is_companion_s_input: COMPA
NION STATE 1
<7>[10088.798515] [2:companionshotTh:21972] [@]companion_imx240_master_setfile.
bin version : A16LSIJ0111MASTR
<7>[10088.803589] [3:companionshotTh:21972] [@]companion_imx240_mode_setfile.bi
n version : A16LSIJ0111MOD00
<7>[10088.803785] [3:companionshotTh:21972] [@][0][COM:D] fimc_is_companion_s_i
nput(0, 21):0
<7>[10088.861778] [2:
mediaserver: 3369] [@][0][SS1:V] fimc_is_ssx_video_ope
n
<4>[10088.862390] [2:
mediaserver: 3369] vdd_disp_cam0: Failed to create deb
ugfs directory
<7>[10088.865310] [0:
mediaserver: 3369] [@][SEN:D:0] fimc_is_sensor_runtime
_resume():0
<7>[10088.865351] [0:
mediaserver: 3369] [@][RSC] rsctype : 0, rsccount : 2
<7>[10088.865369] [0:
mediaserver: 3369] [@][0][SEN:D] fimc_is_sensor_open()
:0
<7>[10088.865766] [0:
mediaserver: 3369] [@][0]fimc_is_sensor_mclk_on : sens
or mclk will on with companion mclk.
<7>[10088.866285] [0:
mediaserver: 3369] [@]fimc_is_sensor_gpio_on : sensor
gpio is already on.
<7>[10088.866318] [0:
mediaserver: 3369] [@][0][SEN:D] fimc_is_sensor_s_inpu

t(21, 0):0
<7>[10088.866704] [0:
mediaserver: 3369] [@][0][I0S:V] fimc_is_ixs_video_ope
n
<7>[10088.867660] [0:
mediaserver: 3369] [@][0][SCP:V] fimc_is_scp_video_ope
n
<7>[10088.868126] [0:
mediaserver: 3369] [@][0][I0P:V] fimc_is_ixp_video_ope
n
<7>[10088.868626] [0:
mediaserver: 3369] [@][0][30S:V] fimc_is_3aa_video_ope
n
<7>[10088.869731] [0:
mediaserver: 3369] [@][0][30C:V] fimc_is_3xc_video_ope
n
<7>[10088.869999] [0:
mediaserver: 3369] [@][0][30P:V] fimc_is_3xp_video_ope
n
<7>[10088.870404] [0:
mediaserver: 3369] [@][0][DIS:V] fimc_is_dis_video_ope
n
<7>[10088.871558] [0:
mediaserver: 3369] [@] fwboot : 0x0
<7>[10088.872449] [0:
mediaserver: 3369] [@]FIMC_IS runtime resume in
<7>[10088.878629] [2:
mediaserver: 3369] [@][RSC] fimc_is_ischain_runtime_re
sume: QoS LOCK [INT(560000), MIF(1456000), CAM(540000)]
<7>[10088.879343] [2:
mediaserver: 3369] [@]FIMC-IS runtime resume out
<7>[10088.879377] [2:
mediaserver: 3369] [@] fwboot : 0x0
<7>[10088.900249] [0:
mediaserver: 3369] [@]Phone FW version : 7420 16216-20
15/12/31 14:16:41]A16LSIL02SM
<7>[10088.900888] [0:
mediaserver: 3369] [@]Camera: the default FW were appl
ied successfully.
<7>[10088.900947] [0:
mediaserver: 3369] [@]fimc_is_ischain_config_secure :
PA_FIMC_IS_GIC_C : 0x000000f8
<7>[10088.900973] [0:
mediaserver: 3369] [@]fimc_is_ischain_power(1):0
<7>[10088.900991] [0:
mediaserver: 3369] [@][RSC] rsctype : 2, rsccount : 3
<7>[10088.901010] [0:
mediaserver: 3369] [@][0][ISC:D] fimc_is_ischain_open(
):0
<7>[10088.901222] [0:
mediaserver: 3369] [@][RSC] cluster1 minfreq : 0Mhz
<7>[10088.901244] [0:
mediaserver: 3369] [@][RSC] cluster1 maxfreq : 1800Mhz
<7>[10088.903240] [0:
mediaserver: 3369] [@][ERR]get_sensor_mode:322:could n
ot find proper sensor mode: 2608x1960@112fps
<7>[10088.903266] [0:
mediaserver: 3369] [@][SEN:D:0] framerate: req@112fps,
cur@112fps
<7>[10088.903446] [0:
mediaserver: 3369] [@]sensor mode(652x488@112) = 4
<7>[10088.905887] [0: kworker/0:3H:27247] [@]IS Version: 244.130 [0x03]
<7>[10088.906490] [0:
mediaserver: 3369] [@][0] =STM CFG===============
<7>[10088.906509] [0:
mediaserver: 3369] [@][0] STM(N) PH: 01 -> GP0 ( 11 *1
2 ) => GP2 ( *32 ) -> GP4 ( 52 )
<7>[10088.906524] [0:
mediaserver: 3369] [@][0] DEVICE GRAPH : 0 2 4
<7>[10088.906537] [0:
mediaserver: 3369] [@][0] =======================
<7>[10088.906554] [0:
mediaserver: 3369] [@]CAL DATA : MAP ver : V003
<7>[10088.906567] [0:
mediaserver: 3369] [@]Camera : Front Sensor Version :
0x11
<7>[10088.906582] [0:
mediaserver: 3369] [@]eeprom_fw_version = B05LLHA01PM,
phone_fw_version = A16LSIL02SM, loaded_fw_version = A16LSIL02SM
<7>[10088.906617] [0:
mediaserver: 3369] [@]Front Camera : the dumped Cal. d
ata was applied successfully.
<7>[10088.906637] [0:
mediaserver: 3369] [@][0]calibration loading is succes
s
<7>[10088.966960] [2:
mediaserver: 3369] [@]SETFILE version : 151016_S5K4E6_
CML_C2_10632 2015/10/16/14:44 E7420
<7>[10088.967198] [2:
mediaserver: 3369] [@]Camera: the default Setfile were
applied successfully.
<7>[10088.971368] [2:
mediaserver: 3369] [@][0][ISC:D] stream off ready
<7>[10088.978697] [2:
mediaserver: 3369] [@]input & output sizes are same(65
2, 488)

<7>[10088.978743] [2:
mediaserver: 3369] [@][0][SEN:D] fimc_is_sensor_back_s
tart(652x488, 0)
<7>[10088.978944] [2:
mediaserver: 3369] [@][0][GP2]bufs: 06, init : 0, asyn
: 1, skip: 0, sync : 0
<7>[10088.979088] [2:
mediaserver: 3369] [@][0][GP0]bufs: 06, init : 3, asyn
: 3, skip: 3, sync : 2
<7>[10088.979121] [2:
mediaserver: 3369] [@][0] =GRP CFG===============
<7>[10088.979155] [2:
mediaserver: 3369] [@][0][GP0] SRC10:0652x0488
<7>[10088.979187] [2:
mediaserver: 3369] [@][0][GP0] CAP11:0652x0652
<7>[10088.979218] [2:
mediaserver: 3369] [@][0][GP0] CAP12:0624x0468
<7>[10088.979255] [2:
mediaserver: 3369] [@][0][GP2] SRC30:0624x0468
<7>[10088.979290] [2:
mediaserver: 3369] [@][0][GP4] SRC50:0624x0468
<7>[10088.979324] [2:
mediaserver: 3369] [@][0][GP4] CAP52:0624x0468
<7>[10088.979354] [2:
mediaserver: 3369] [@][0] =======================
<7>[10088.979386] [2:
mediaserver: 3369] [@][0] TPU FULL BYPASS
<7>[10088.987357] [2:
mediaserver: 3369] [@][RSC] fimc_is_dvfs_sel_table(1):
0
<7>[10088.987397] [2:
mediaserver: 3369] [@][0][ISC:D] fimc_is_ischain_start
(33):0
<7>[10088.988286] [1:fimc_is_gworker:21989] [@][0][3XP][F1]ot_crop[0, 0, 624, 4
68] on
<7>[10088.988326] [1:fimc_is_gworker:21989] [@][0][3XP][WRN]1 frame is drop
<7>[10088.989160] [2:
mediaserver: 3369] [@][0][CSI] settle(652x488@112) = 2
2
<7>[10088.989201] [2:
mediaserver: 3369] [@][0][CSI] vci(0x32314742) = 1
<7>[10088.989416] [1:fimc_is_gworker:21989] [@][0][3XP][WRN]2 frame is drop
<7>[10088.990371] [1:fimc_is_gworker:21989] [@][0][3XP][WRN]3 frame is drop
<7>[10088.990480] [2:
mediaserver: 3369] [@][0][ISC:D] stream on ready(3, 3)
<7>[10088.990537] [2:
mediaserver: 3369] [@][WRN]couldn't find static dvfs s
cenario [sensor:(1/0)/fps:112/setfile:33/scp size:(624/468)]
<7>[10088.990537] [2:
mediaserver: 3369]
<7>[10088.990607] [2:
mediaserver: 3369] [@][0][ISC:D] tbl[1] static scenari
o(0)-[]
<6>[10088.999970] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa264e0
<6>[10089.000035] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10089.000225] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[10089.000273] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[10089.000317] [2:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work was
cancelled
<6>[10089.003298] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[10089.004573] [2:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 dc 17 51 00 0e 00 14 06 00
<6>[10089.007213] [1:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 cb 19 4f 00 00 00
<6>[10089.012372] [2:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 cb 19 4f 00 15 00 02 04 00
<7>[10089.024988] [1:
mediaserver: 3369] [@]DTP checking...
<7>[10089.025362] [1:fimc_is_gworker:21989] [@][0][3XP][WRN]4 frame is drop
<7>[10089.029973] [1:fimc_is_gworker:21989] [@][0][3XP][WRN]5 frame is drop
<7>[10089.038896] [1:fimc_is_gworker:21989] [@][0][3XP][WRN]6 frame is drop
<7>[10089.046969] I[0:
swapper/0:
0] [@]grp1(res 2, rcnt 0, scnt 6), grp
2(res 3, rcnt 0, scnt 0), fcount 7(0, 0) pcount 14
<7>[10089.055318] [0: kworker/0:3H:27247] [@][0][GP0][WRN] complete bufs : 4
<7>[10089.055921] I[0:
swapper/0:
0] [@]grp1(res 3, rcnt 0, scnt 6), grp
2(res 3, rcnt 0, scnt 0), fcount 8(0, 0) pcount 14
<7>[10089.064368] [0: kworker/0:3H:27247] [@][0][GP0][WRN] complete bufs : 5
<7>[10089.064886] I[0:
swapper/0:
0] [@]grp1(res 4, rcnt 0, scnt 6), grp

2(res 3, rcnt 0, scnt 0), fcount 9(0, 0) pcount 14


<7>[10089.064996] [0:
mediaserver: 3369] [@][0][ISC:D] stream off ready
<7>[10089.073271] [0: kworker/0:3H:27247] [@][0][GP0][WRN] complete bufs : 6
<7>[10089.084532] [1:
mediaserver: 3369] [@][0][FRT:D] fimc_is_sensor_front_
stop(0)
<7>[10089.084586] [1:
mediaserver: 3369] [@][FRT:D:0] instant off(fcount : 0
, time : 40ms)
<7>[10089.084673] [1:
mediaserver: 3369] [@][0][WRN]fimc_is_flite_stop, no w
aiting...
<7>[10089.084731] [1:
mediaserver: 3369] [@][0][BAK:D] fimc_is_sensor_back_s
top(0)
<7>[10089.085069] [1:
mediaserver: 3369] [@][0][WRN]video10 stream off : que
ued buffer is not empty(6)
<7>[10089.088446] [1:
mediaserver: 3369] [@][0][GP0] sensor fcount: 9, fcoun
t: 6
<7>[10089.088502] [1:
mediaserver: 3369] [@][0][GP0]fimc_is_ischain_3aa_stop
(6):0
<7>[10089.088544] [1:
mediaserver: 3369] [@][WRN]com frame1 is flushed(count
: 5)
<7>[10089.088581] [1:
mediaserver: 3369] [@][WRN]com frame2 is flushed(count
: 4)
<7>[10089.088617] [1:
mediaserver: 3369] [@][WRN]com frame3 is flushed(count
: 3)
<7>[10089.088654] [1:
mediaserver: 3369] [@][WRN]com frame4 is flushed(count
: 2)
<7>[10089.088690] [1:
mediaserver: 3369] [@][WRN]com frame5 is flushed(count
: 1)
<7>[10089.088727] [1:
mediaserver: 3369] [@][WRN]com frame6 is flushed(count
: 0)
<7>[10089.090580] [1:
mediaserver: 3369] [@][0][WRN]already process stop
<7>[10089.091394] [1:
mediaserver: 3369] [@][0][GP2]fimc_is_ischain_isp_stop
(0):0
<7>[10089.092359] [1:
mediaserver: 3369] [@]sensor mode(652x488@112) = 4
<7>[10089.092414] [1:
mediaserver: 3369] [@][SEN:D:0] framerate: req@30fps,
cur@30fps
<7>[10089.095278] [1:
mediaserver: 3369] [@]sensor mode(652x488@112) = 4
<7>[10089.095332] [1:
mediaserver: 3369] [@][SEN:D:0] framerate: req@30fps,
cur@30fps
<7>[10089.095805] [1:
mediaserver: 3369] [@]sensor mode(2608x1960@30) = 0
<7>[10089.103699] [1:
mediaserver: 3369] [@][0][GP2]bufs: 06, init : 0, asyn
: 1, skip: 0, sync : 0
<7>[10089.103929] [1:
mediaserver: 3369] [@][0][GP0]bufs: 06, init : 1, asyn
: 1, skip: 1, sync : 2
<7>[10089.103969] [1:
mediaserver: 3369] [@][0] =GRP CFG===============
<7>[10089.104011] [1:
mediaserver: 3369] [@][0][GP0] SRC10:2608x1960
<7>[10089.104053] [1:
mediaserver: 3369] [@][0][GP0] CAP11:2608x1960
<7>[10089.104093] [1:
mediaserver: 3369] [@][0][GP0] CAP12:1920x1080
<7>[10089.104137] [1:
mediaserver: 3369] [@][0][GP2] SRC30:1920x1080
<7>[10089.104182] [1:
mediaserver: 3369] [@][0][GP4] SRC50:1920x1080
<7>[10089.104223] [1:
mediaserver: 3369] [@][0][GP4] CAP52:0480x0270
<7>[10089.104262] [1:
mediaserver: 3369] [@][0] =======================
<7>[10089.104302] [1:
mediaserver: 3369] [@][0] TPU FULL BYPASS
<7>[10089.137069] [1:
mediaserver: 3369] [@][0][ISC:D] fimc_is_ischain_start
(33):0
<7>[10089.137338] [1:
mediaserver: 3369] [@]input & output sizes are same(26
08, 1960)
<7>[10089.137378] [1:
mediaserver: 3369] [@][0][SEN:D] fimc_is_sensor_back_s
tart(2608x1960, 0)
<7>[10089.139129] [1:fimc_is_gworker:21989] [@][0][3XS][F7]in_crop[0, 246, 2592
, 1458]

<7>[10089.139175] [1:fimc_is_gworker:21989] [@][0][3XS][F7]ot_crop[0, 0, 1920,


1080]
<7>[10089.139239] [1:fimc_is_gworker:21989] [@][0][3XP][F7]ot_crop[0, 0, 1920,
1080] on
<7>[10089.140688] [1:
mediaserver: 3369] [@][0][CSI] settle(2608x1960@30) =
22
<7>[10089.140743] [1:
mediaserver: 3369] [@][0][CSI] vci(0x32314742) = 1
<7>[10089.140835] [1:
mediaserver: 3369] [@][0][ISC:D] stream on ready(1, 1)
<7>[10089.140895] [1:
mediaserver: 3369] [@][WRN]couldn't find static dvfs s
cenario [sensor:(1/0)/fps:30/setfile:33/scp size:(480/270)]
<7>[10089.140895] [1:
mediaserver: 3369]
<7>[10089.140965] [1:
mediaserver: 3369] [@][0][ISC:D] tbl[1] static scenari
o(0)-[]
<6>[10089.221265] [1: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10089.221320] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[10089.221343] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[10089.221369] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[10089.221569] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<7>[10089.266291] [1:fimc_is_gworker:21988] [@][0][SCP][F7]CRange:W
<7>[10089.266327] [1:fimc_is_gworker:21988] [@][0][SCP][F7]in_crop[0, 0, 1920,
1080]
<7>[10089.266343] [1:fimc_is_gworker:21988] [@][0][SCP][F7]ot_crop[0, 0, 480, 2
70]
<7>[10089.442215] [2: monitorThread:22007] [@]FIMC_IS_SYNC 77
<7>[10089.458200] [1:fimc_is_gworker:21988] [@][0][VRA][F10]bypass : 0
<6>[10089.504439] [2: irq/15-SSP_Int: 1775] [SSP] [M] AR-0,1276,6613,4696,180,2
0,0,0
<7>[10089.660399] [3:
mediaserver: 3369] [@][RSC] cluster1 minfreq : 0Mhz
<7>[10089.660426] [3:
mediaserver: 3369] [@][RSC] cluster1 maxfreq : 0Mhz
<7>[10089.668977] [1:
mediaserver: 3369] [@][0][ISC:D] stream off ready
<7>[10089.676482] [1:
mediaserver: 3369] [@][0][FRT:D] fimc_is_sensor_front_
stop(0)
<7>[10089.676608] [1:
mediaserver: 3369] [@][0][WRN]fimc_is_flite_stop, no w
aiting...
<7>[10089.676641] [1:
mediaserver: 3369] [@][0][BAK:D] fimc_is_sensor_back_s
top(0)
<7>[10089.676818] [1:
mediaserver: 3369] [@][0][WRN]video10 stream off : que
ued buffer is not empty(2)
<7>[10089.676840] [1:
mediaserver: 3369] [@][0][WRN] front is stopped, force
ly trigger(pc 15)
<7>[10089.676875] [1:fimc_is_gworker:21989] [@][0][GP0][WRN] cancel by fstop2
<7>[10089.676900] [1:fimc_is_gworker:21989] [@][0][3XP][F0][ERR] CANCEL(4)
<7>[10089.676920] [1:fimc_is_gworker:21989] [@][0][GP0][F16][ERR] CANCEL(4)
<7>[10089.676952] [1:
mediaserver: 3369] [@][0][GP0][WRN] 0 reqs waiting...
<7>[10089.699333] [0: kworker/0:3H:27247] [@][0][3XP][F16][ERR] NDONE(3, E1)
<7>[10089.699489] [0: kworker/0:3H:27247] [@][0][GP0][F16][ERR] NDONE(3, EF(L
0 H0))
<7>[10089.702304] [1:
mediaserver: 3369] [@][0][GP0] sensor fcount: 16, fcou
nt: 16
<7>[10089.702404] [1:
mediaserver: 3369] [@][0][GP0]fimc_is_ischain_3aa_stop
(10):0
<7>[10089.702447] [1:
mediaserver: 3369] [@][WRN]com frame16 is flushed(coun
t : 1)
<7>[10089.702485] [1:
mediaserver: 3369] [@][WRN]com frame16 is flushed(coun
t : 0)

<7>[10089.703643] [1:
mediaserver: 3369] [@][0][WRN]video12 stream off : que
ued buffer is not empty(2)
<7>[10089.704233] [1:
mediaserver: 3369] [@][0][WRN]already process stop
<7>[10089.704829] [1:
mediaserver: 3369] [@][0][GP2]fimc_is_ischain_isp_stop
(9):0
<7>[10089.728653] [1:
Binder_3: 5178] [@][RSC] rsctype : 3, rsccount : 2
<7>[10089.728685] [1:
Binder_3: 5178] [@][0][COM:D] fimc_is_companion_clo
se(0)
<7>[10089.728710] [1:
Binder_3: 5178] [@][0][COM:V] fimc_is_comp_video_cl
ose():0
<7>[10089.729147] [1:
Binder_3: 5178] [@][0][WRN]already back stop
<7>[10089.729176] [1:
Binder_3: 5178] [@][0][BAK:D] fimc_is_sensor_back_s
top(0)
<7>[10089.729193] [1:
Binder_3: 5178] [@][0][WRN]already front stop
<7>[10089.729211] [1:
Binder_3: 5178] [@][0][FRT:D] fimc_is_sensor_front_
stop(0)
<7>[10089.729266] [1:
Binder_3: 5178] [@][RSC] rsctype : 0, rsccount : 1
<7>[10089.729284] [1:
Binder_3: 5178] [@][0][SEN:D] fimc_is_sensor_close(
):0
<7>[10089.729316] [1:
Binder_3: 5178] [@][0][SS0:V] fimc_is_ssx_video_clo
se(0):0
<7>[10089.729529] [1:
Binder_3: 5178] [@][0][30P:V] fimc_is_3xp_video_clo
se(6,0):0
<7>[10089.729619] [1:
Binder_3: 5178] [@][0][30C:V] fimc_is_3xc_video_clo
se(5,0):0
<7>[10089.729695] [1:
Binder_3: 5178] [@][0][WRN]already group stop
<7>[10089.729713] [1:
Binder_3: 5178] [@][0][WRN]already stop
<7>[10089.729732] [1:
Binder_3: 5178] [@][0][GP0]fimc_is_ischain_3aa_stop
(10):0
<7>[10089.729878] [1:
Binder_3: 5178] [@][0][30S:V] fimc_is_3aa_video_clo
se(4,0):0
<7>[10089.730113] [1:
Binder_3: 5178] [@][0][SCP:V] fimc_is_scp_video_clo
se(3,0):0
<7>[10089.730190] [1:
Binder_3: 5178] [@][0][WRN]already group stop
<7>[10089.730209] [1:
Binder_3: 5178] [@][0][GP2]fimc_is_ischain_isp_stop
(9):0
<7>[10089.730296] [1:
Binder_3: 5178] [@][0][I0S:V] fimc_is_ixs_video_clo
se(2,0):0
<7>[10089.730383] [1:
Binder_3: 5178] [@][0][I0P:V] fimc_is_ixp_video_clo
se(1,0):0
<7>[10089.730586] [1:
Binder_3: 5178] [@][0][WRN]already group stop
<7>[10089.730605] [1:
Binder_3: 5178] [@][0][GP4]fimc_is_ischain_dis_stop
(0):0
<7>[10089.749128] [1:
Binder_3: 5178] [@]A5 state(0x2000)
<7>[10089.749173] [1:
Binder_3: 5178] [@]FIMC_IS runtime suspend in
<7>[10089.755620] [1:
Binder_3: 5178] [@]FIMC_IS runtime suspend out
<7>[10089.756176] [1:
kworker/1:4:14113] [@]fimc_is_sensor_gpio_off : compan
ion gpio is on. we will gpio off on device-companion
<7>[10089.756394] [1:
kworker/1:4:14113] [@]fimc_is_sensor_mclk_off : compan
ion clk is on. sensor mclk will off with companion mclk
<7>[10089.756421] [1:
kworker/1:4:14113] [@][SEN:D:0] fimc_is_sensor_runtime
_suspend():0
<7>[10089.756826] [1:
Binder_3: 5178] [@]fimc_is_ischain_power(0):0
<7>[10089.758427] [1:
kworker/1:4:14113] [@]fimc_is_companion_runtime_suspen
d
<7>[10089.758461] [1:
kworker/1:4:14113] [@] pin_ctrl(act(4), pin(0), val(0)
, nm(pin)
<7>[10089.758478] [1:
kworker/1:4:14113] [@] pin_ctrl(act(4), pin(0), val(1)
, nm(pin)
<7>[10089.758494] [1:
kworker/1:4:14113] [@] pin_ctrl(act(4), pin(0), val(0)

, nm(pin)
<7>[10089.758511] [1:
kworker/1:4:14113] [@] pin_ctrl(act(1), pin(52), val(0
), nm(rst_low)
<7>[10089.758527] [1:
kworker/1:4:14113] [@] pin_ctrl(act(1), pin(54), val(0
), nm(standby_low)
<7>[10089.758544] [1:
kworker/1:4:14113] [@] pin_ctrl(act(1), pin(55), val(0
), nm(comp_rst low)
<7>[10089.758560] [1:
kworker/1:4:14113] [@] pin_ctrl(act(5), pin(0), val(0)
, nm(VDDD_CORE_0.8V_COMP)
<7>[10089.758576] [1:
kworker/1:4:14113] [@] pin_ctrl(act(5), pin(0), val(0)
, nm(VDDD_NORET_0.9V_COMP)
<7>[10089.758591] [1:
kworker/1:4:14113] [@] pin_ctrl(act(5), pin(0), val(0)
, nm(VDDD_CORE_1.0V_COMP)
<7>[10089.758608] [1:
kworker/1:4:14113] [@] pin_ctrl(act(5), pin(0), val(0)
, nm(VDDA_1.8V_COMP)
<7>[10089.758624] [1:
kworker/1:4:14113] [@] pin_ctrl(act(5), pin(0), val(1)
, nm(VDDD_RET_1.0V_COMP)
<7>[10089.758640] [1:
kworker/1:4:14113] [@] pin_ctrl(act(5), pin(0), val(0)
, nm(VDDD_1.2V_VT)
<7>[10089.758656] [1:
kworker/1:4:14113] [@] pin_ctrl(act(5), pin(0), val(0)
, nm(VDDA_2.9V_VT)
<7>[10089.758671] [1:
kworker/1:4:14113] [@] pin_ctrl(act(5), pin(0), val(0)
, nm(VDDIO_1.8V_VT)
<7>[10089.758687] [1:
kworker/1:4:14113] [@] pin_ctrl(act(5), pin(0), val(0)
, nm(VDDIO_1.8V_CAM)
<7>[10089.758703] [1:
kworker/1:4:14113] [@] pin_ctrl(act(5), pin(0), val(0)
, nm(OIS_VDD_2.8V)
<7>[10089.758719] [1:
kworker/1:4:14113] [@] pin_ctrl(act(5), pin(0), val(0)
, nm(OIS_VM_2.8V)
<6>[10089.762626] [1:
kworker/1:4:14113] exynos_fimc_is_module_pin_control :
regulator_set_voltage(700000)
<4>[10089.765028] [1:
kworker/1:4:14113] VDDD_RET_1.0V_COMP regulator is alr
eady enabled
<7>[10089.777632] [1:
kworker/1:4:14113] [@]fimc_is_companion_gpio_off: COMP
ANION STATE 2
<7>[10089.778001] [1:
kworker/1:4:14113] [@][COM:D] fimc_is_companion_runtim
e_suspend(0)
<7>[10089.778855] [0:
Binder_3: 5178] [@][RSC] rsctype : 2, rsccount : 0
<7>[10089.779021] [0:
Binder_3: 5178] [@][0][ISC:D] fimc_is_ischain_close
():0
<7>[10089.779063] [0:
Binder_3: 5178] [@][0][DIS:V] fimc_is_dis_video_clo
se(0,0):0
<6>[10090.120799] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [P] tID:0 tc:1 tm
:0
<6>[10090.195550] [0: thread_hotplug:19286] frequency info : 800000, prev_cmd 0
, exe_cmd 4
<6>[10090.195583] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10090.195602] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10090.222174] [7: kworker/u16:18:32540] [mhi_initiate_m3] Entered MHI state
4, Pending M0 0 Pending M3 0
<6>[10090.222198] [7: kworker/u16:18:32540] [mhi_initiate_m3] Triggering wake o
ut of M2
<6>[10090.233097] [5: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26530
<6>[10090.233122] [5: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10090.233263] [4:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[10090.233281] [4:MHI_STATE_THREA: 4605] [process_M0_transition] Entered

<6>[10090.233296] [4:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT


cancelled, either running or never started
<6>[10090.233976] [4:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[10090.234088] [7: kworker/u16:18:32540] [mhi_initiate_m3] Cancelled M1 time
r, timer was active
<6>[10090.234148] [7: kworker/u16:18:32540] [mhi_initiate_m3] Waiting for M3 co
mpletion.
<6>[10090.243264] [5: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10090.243415] [4:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 5
<6>[10090.243433] [4:MHI_STATE_THREA: 4605] [process_M3_transition] Processing
M3 state transition
<6>[10090.243558] [7: kworker/u16:18:32540] [mhi_initiate_m3] M3 completion rec
eived
<6>[10090.243585] [7: kworker/u16:18:32540] [mhi_turn_off_pcie_link] Entered...
<6>[10090.255620] [5: kworker/u16:18:32540] mhi 0000:01:00.0: [debug] pmcsr reg
: b dev->current_state : 0
<6>[10090.255749] [5: kworker/u16:18:32540] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[10090.255825] [5: kworker/u16:18:32540] exynos-pcie 10ee0000.pcie0: ack mes
sage is ok
<6>[10090.255840] [5: kworker/u16:18:32540] exynos-pcie 10ee0000.pcie0: receive
d Enter_L23_READY DLLP packet
<6>[10090.255861] [5: kworker/u16:18:32540] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[10090.255955] [5: kworker/u16:18:32540] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[10090.280020] I[0: RenderThread:14312] exynos-pcie 10ee0000.pcie0: cp2ap_w
ake irq involked
<6>[10090.280088] [0:
kworker/0:0:13589] exynos-pcie 10ee0000.pcie0: PCIe: W
ake work for RC0
<6>[10090.280108] [0:
kworker/0:0:13589] exynos-pcie 10ee0000.pcie0: Callbac
k for the event : 4
<6>[10090.280122] [0:
kworker/0:0:13589] [mhi_link_state_cb] Received MSM_PC
IE_EVENT_WAKE
<6>[10090.280174] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 10
<6>[10090.280190] [1:MHI_STATE_THREA: 4605] [process_WAKE_transition] Entered
<6>[10090.285926] [5: kworker/u16:18:32540] [mhi_turn_off_pcie_link] Exited...
<6>[10090.285936] [1:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[10090.285950] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, start of poweron, pcie state: 0
<6>[10090.295577] [0: thread_hotplug:19286] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[10090.295600] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10090.295612] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10090.322611] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: D state
: 0, 787000
<6>[10090.341059] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_reset: Link up : 0x0338f611
<6>[10090.341419] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, end of poweron, pcie state: 3
<6>[10090.346630] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [R] tID:0 mc: 18
tc:0 Ver[005683000]
<6>[10090.352410] [5:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] pmcsr reg
: 8 dev->current_state : 3
<6>[10090.352591] [5:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb

<6>[10090.352615] [5:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover


y for the link of RC0
<6>[10090.352636] [5:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
config space of RC0 and its EP
<6>[10090.352655] [5:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
RC0
<6>[10090.352702] [5:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
EP of RC0
<6>[10090.353046] [5:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Refresh
ing the saved config space in PCI framework for RC0 and its EP
<6>[10090.358528] [5:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[10090.358552] [5:MHI_STATE_THREA: 4605] [process_WAKE_transition] MHI is in
itialized, transitioning to M0.
<6>[10090.358572] [5:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Entered MHI state
5, Pending M0 0 Pending M3 0
<6>[10090.358593] [5:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Waiting for M0 M1
or M3. Currently 5...
<6>[10090.358611] [5:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Wait complete sta
te: 5
<6>[10090.358630] [5:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[10090.358648] [5:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[10090.358665] [5:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Setting M0 ...
<6>[10090.358904] [5:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Exited...
<6>[10090.358922] [5:MHI_STATE_THREA: 4605] [process_WAKE_transition] Exited.
<6>[10090.362045] [5: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 5 link 1, ring type 2, index 0 db 0x5fa26550
<6>[10090.362070] [5: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10090.362113] [6:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[10090.362170] [6:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[10090.362193] [6:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[10090.362793] [6:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[10090.366701] [4:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 dd 17 51 00 0e 00 14 06 00
<6>[10090.367526] [6:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 cc 19 4f 00 00 00
<6>[10090.379850] [7:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 cc 19 4f 00 15 00 02 04 00
<6>[10090.395593] [0: thread_hotplug:19286] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[10090.395614] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10090.395626] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10090.588883] [5: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10090.589032] [6:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[10090.589058] [6:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[10090.589085] [6:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[10090.589286] [6:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[10090.895544] [0: thread_hotplug:19286] frequency info : 1000000, prev_cmd
0, exe_cmd 4
<6>[10090.895571] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10090.895587] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0

<6>[10091.028425] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [P] tID:0 tc:1 tm


:0
<6>[10091.098882] [0: thread_hotplug:19286] frequency info : 800000, prev_cmd 0
, exe_cmd 4
<6>[10091.098918] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10091.098955] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10091.121641] [2: irq/15-SSP_Int: 1775] [SSP] [M] PD: W->R
<6>[10091.121641] [2: irq/15-SSP_Int: 1775] save bak odr 0, 1, 20, 20, 0
<6>[10091.121641] [2: irq/15-SSP_Int: 1775] save bak odr 0, 0, 20, 20, 0
<6>[10091.121641] [2: irq/15-SSP_Int: 1775] AD 0 7 1 6, 20
<6>[10091.121641] [2: irq/15-SSP_Int: 1775] save bak odr 0, 1, 20, 20, 0
<6>[10091.121641] [2: irq/15-SSP_Int: 1775] save bak odr 0, 0, 20, 20, 0
<6>[10091.121641] [2: irq/15-SSP_Int: 1775] RM 0 6 1 5 60
<6>[10091.147061] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [R] tID:0 mc: 9 t
c:0 Ver[005683000]
<6>[10091.198833] [0: thread_hotplug:19286] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[10091.198853] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10091.198865] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10091.559337] [5: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa265a0
<6>[10091.559372] [5: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10091.559420] [6:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[10091.559448] [6:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[10091.559470] [6:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work was
cancelled
<6>[10091.560253] [6:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[10091.563593] [7:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 de 17 51 00 0e 00 14 06 00
<6>[10091.564230] [4:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 cd 19 4f 00 00 00
<6>[10091.576783] [7:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 cd 19 4f 00 15 00 02 04 00
<6>[10091.702303] [0: thread_hotplug:19286] frequency info : 1000000, prev_cmd
0, exe_cmd 4
<6>[10091.702335] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10091.702351] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10091.785847] [5: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10091.786021] [6:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[10091.786047] [6:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[10091.786074] [6:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[10091.786275] [6:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[10092.789322] [2: kworker/u16:18:32540] [mhi_initiate_m3] Entered MHI state
4, Pending M0 0 Pending M3 0
<6>[10092.789402] [2: kworker/u16:18:32540] [mhi_initiate_m3] Triggering wake o
ut of M2
<6>[10092.800359] [1: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa265f0
<6>[10092.800430] [1: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0

<6>[10092.800677] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni


ng to 2
<6>[10092.800730] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[10092.800776] [2:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[10092.805355] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[10092.805501] [3: kworker/u16:18:32540] [mhi_initiate_m3] Cancelled M1 time
r, timer was active
<6>[10092.805745] [3: kworker/u16:18:32540] [mhi_initiate_m3] Waiting for M3 co
mpletion.
<6>[10092.819207] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10092.819471] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 5
<6>[10092.819525] [2:MHI_STATE_THREA: 4605] [process_M3_transition] Processing
M3 state transition
<6>[10092.822996] [3: kworker/u16:18:32540] [mhi_initiate_m3] M3 completion rec
eived
<6>[10092.823067] [3: kworker/u16:18:32540] [mhi_turn_off_pcie_link] Entered...
<6>[10092.835937] [3: kworker/u16:18:32540] mhi 0000:01:00.0: [debug] pmcsr reg
: b dev->current_state : 0
<6>[10092.836140] [3: kworker/u16:18:32540] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[10092.836257] [3: kworker/u16:18:32540] exynos-pcie 10ee0000.pcie0: ack mes
sage is ok
<6>[10092.836304] [3: kworker/u16:18:32540] exynos-pcie 10ee0000.pcie0: receive
d Enter_L23_READY DLLP packet
<6>[10092.836358] [3: kworker/u16:18:32540] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[10092.836541] [3: kworker/u16:18:32540] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[10092.866557] [3: kworker/u16:18:32540] [mhi_turn_off_pcie_link] Exited...
<6>[10093.455619] [2: irq/15-SSP_Int: 1775] [SSP] [M] AR-0,1154,6733,4246,180,2
0,0,0
<6>[10094.121389] I[0:
swapper/0:
0] exynos-pcie 10ee0000.pcie0: cp2ap_w
ake irq involked
<6>[10094.121527] [0:
kworker/0:1:25228] exynos-pcie 10ee0000.pcie0: PCIe: W
ake work for RC0
<6>[10094.121586] [0:
kworker/0:1:25228] exynos-pcie 10ee0000.pcie0: Callbac
k for the event : 4
<6>[10094.121629] [0:
kworker/0:1:25228] [mhi_link_state_cb] Received MSM_PC
IE_EVENT_WAKE
<6>[10094.121916] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 10
<6>[10094.121966] [2:MHI_STATE_THREA: 4605] [process_WAKE_transition] Entered
<6>[10094.122013] [2:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[10094.122066] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, start of poweron, pcie state: 0
<6>[10094.162853] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: D state
: 0, addd00
<6>[10094.184073] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_reset: Link up : 0x03bacc11
<6>[10094.184579] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, end of poweron, pcie state: 3
<6>[10094.195928] [2:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] pmcsr reg
: 8 dev->current_state : 3
<6>[10094.196099] [2:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[10094.196150] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
y for the link of RC0

<6>[10094.196195] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover


config space of RC0 and its EP
<6>[10094.196238] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
RC0
<6>[10094.196325] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
EP of RC0
<6>[10094.196790] [2:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Refresh
ing the saved config space in PCI framework for RC0 and its EP
<6>[10094.202192] [2:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[10094.202251] [2:MHI_STATE_THREA: 4605] [process_WAKE_transition] MHI is in
itialized, transitioning to M0.
<6>[10094.202299] [2:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Entered MHI state
5, Pending M0 0 Pending M3 0
<6>[10094.202347] [2:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Waiting for M0 M1
or M3. Currently 5...
<6>[10094.202392] [2:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Wait complete sta
te: 5
<6>[10094.202435] [2:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[10094.202476] [2:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[10094.202518] [2:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Setting M0 ...
<6>[10094.202752] [2:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Exited...
<6>[10094.202793] [2:MHI_STATE_THREA: 4605] [process_WAKE_transition] Exited.
<6>[10094.204859] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 5 link 1, ring type 2, index 0 db 0x5fa26610
<6>[10094.204918] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10094.205142] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[10094.205193] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[10094.205240] [2:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[10094.209437] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[10094.209478] [1:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 df 17 51 00 0e 00 14 06 00
<6>[10094.211328] [1:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 ce 19 4f 00 00 00
<6>[10094.224807] [1:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 ce 19 4f 00 15 00 02 04 00
<6>[10094.312383] [2: kworker/u16:1:32448] vfsspi_work_func_debug ldo: 3, slee
p: 0, irq: 0, tz: 1, type: viper
<6>[10094.312422] [1: kworker/u16:18:32540] [SSP] debug_work_func: (61) - Senso
r state: 0x1fc3febf, RC: 1, CC: 0 DC: 0 TC: 0
<6>[10094.312462] [1: kworker/u16:18:32540] [SSP] 0 : 1336, 6699, 4655 (200ms,
0ms)
<6>[10094.312496] [1: kworker/u16:18:32540] [SSP] 9 : 33, 26, 30, 85, 245, 3 (2
00ms)
<6>[10094.312527] [1: kworker/u16:18:32540] [SSP] 13 : 1(1ms)
<6>[10094.433961] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10094.434265] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[10094.434330] [0:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[10094.434388] [0:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[10094.434623] [0:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[10095.399587] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26660
<6>[10095.399665] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re

ceived ring 0x0


<6>[10095.399912] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[10095.399965] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[10095.400009] [0:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work was
cancelled
<6>[10095.405266] [1:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 e0 17 51 00 0e 00 14 06 00
<6>[10095.407705] [2:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 cf 19 4f 00 00 00
<6>[10095.408116] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[10095.415662] [2:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 cf 19 4f 00 15 00 02 04 00
<6>[10095.624840] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10095.625095] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[10095.625149] [0:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[10095.625210] [0:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[10095.625443] [0:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[10096.629176] [0: kworker/u16:1:32448] [mhi_initiate_m3] Entered MHI state
4, Pending M0 0 Pending M3 0
<6>[10096.629257] [0: kworker/u16:1:32448] [mhi_initiate_m3] Triggering wake o
ut of M2
<6>[10096.631322] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa266b0
<6>[10096.631394] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10096.631648] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[10096.631701] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[10096.631747] [0:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[10096.635721] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[10096.635900] [3: kworker/u16:1:32448] [mhi_initiate_m3] Cancelled M1 time
r, timer was active
<6>[10096.636150] [3: kworker/u16:1:32448] [mhi_initiate_m3] Waiting for M3 co
mpletion.
<6>[10096.649113] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10096.649188] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 5
<6>[10096.649213] [0:MHI_STATE_THREA: 4605] [process_M3_transition] Processing
M3 state transition
<6>[10096.649367] [3: kworker/u16:1:32448] [mhi_initiate_m3] M3 completion rec
eived
<6>[10096.649404] [3: kworker/u16:1:32448] [mhi_turn_off_pcie_link] Entered...
<6>[10096.662480] [3: kworker/u16:1:32448] mhi 0000:01:00.0: [debug] pmcsr reg
: b dev->current_state : 0
<6>[10096.662665] [3: kworker/u16:1:32448] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[10096.662770] [3: kworker/u16:1:32448] exynos-pcie 10ee0000.pcie0: ack mes
sage is ok
<6>[10096.662802] [3: kworker/u16:1:32448] exynos-pcie 10ee0000.pcie0: receive
d Enter_L23_READY DLLP packet
<6>[10096.662844] [3: kworker/u16:1:32448] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, start of poweroff, pcie state: 2

<6>[10096.662991] [3: kworker/u16:1:32448] exynos-pcie 10ee0000.pcie0: exynos_


pcie_poweroff, end of poweroff, pcie state: 0
<6>[10096.692988] [3: kworker/u16:1:32448] [mhi_turn_off_pcie_link] Exited...
<6>[10096.902297] I[0:
kworker/0:1:25228] exynos-pcie 10ee0000.pcie0: cp2ap_w
ake irq involked
<6>[10096.902659] [0:
kworker/0:1:25228] exynos-pcie 10ee0000.pcie0: PCIe: W
ake work for RC0
<6>[10096.902805] [0:
kworker/0:1:25228] exynos-pcie 10ee0000.pcie0: Callbac
k for the event : 4
<6>[10096.902921] [0:
kworker/0:1:25228] [mhi_link_state_cb] Received MSM_PC
IE_EVENT_WAKE
<6>[10096.903369] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 10
<6>[10096.903421] [1:MHI_STATE_THREA: 4605] [process_WAKE_transition] Entered
<6>[10096.903467] [1:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[10096.903521] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, start of poweron, pcie state: 0
<6>[10096.942760] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: D state
: 0, 6f8700
<6>[10096.957929] [0:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_reset: Link up : 0x039e2d11
<6>[10096.958330] [0:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweron, end of poweron, pcie state: 3
<6>[10096.972113] [1:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] pmcsr reg
: 8 dev->current_state : 3
<6>[10096.972495] [1:MHI_STATE_THREA: 4605] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[10096.972541] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
y for the link of RC0
<6>[10096.972573] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
config space of RC0 and its EP
<6>[10096.972601] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
RC0
<6>[10096.972665] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Recover
EP of RC0
<6>[10096.973155] [1:MHI_STATE_THREA: 4605] exynos-pcie 10ee0000.pcie0: Refresh
ing the saved config space in PCI framework for RC0 and its EP
<6>[10096.978502] [1:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[10096.978539] [1:MHI_STATE_THREA: 4605] [process_WAKE_transition] MHI is in
itialized, transitioning to M0.
<6>[10096.978562] [1:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Entered MHI state
5, Pending M0 0 Pending M3 0
<6>[10096.978583] [1:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Waiting for M0 M1
or M3. Currently 5...
<6>[10096.978603] [1:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Wait complete sta
te: 5
<6>[10096.978624] [1:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Entered...
<6>[10096.978642] [1:MHI_STATE_THREA: 4605] [mhi_turn_on_pcie_link] Exited...
<6>[10096.978661] [1:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Setting M0 ...
<6>[10096.978912] [1:MHI_STATE_THREA: 4605] [mhi_initiate_m0] Exited...
<6>[10096.978940] [1:MHI_STATE_THREA: 4605] [process_WAKE_transition] Exited.
<6>[10096.981034] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 5 link 1, ring type 2, index 0 db 0x5fa266d0
<6>[10096.981072] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10096.981216] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[10096.981240] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[10096.981262] [2:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started

<6>[10096.982080] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Exited


<6>[10096.985292] [2:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 40
00 80 03 01 04 e1 17 82 00 34 00 01 08 00
<6>[10097.194009] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10097.194162] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[10097.194187] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[10097.194215] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[10097.194418] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[10097.589484] [2: irq/15-SSP_Int: 1775] [SSP] [M] AR-0,1002,6616,4727,180,2
0,0,0
<6>[10097.688673] [3: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26700
<6>[10097.688755] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10097.689044] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[10097.689097] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[10097.689142] [2:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work was
cancelled
<6>[10097.693272] [0:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 1a
00 80 03 01 04 e2 17 51 00 0e 00 14 06 00
<6>[10097.693607] [2:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[10097.695081] [3:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 d0 19 4f 00 00 00
<6>[10097.698267] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [P] tID:0 tc:1 tm
:0
<6>[10097.706705] [5:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 21
00 80 03 01 02 d0 19 4f 00 15 00 02 04 00
<6>[10097.715550] [0: thread_hotplug:19286] frequency info : 800000, prev_cmd 0
, exe_cmd 4
<6>[10097.715584] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10097.715603] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10097.792937] [1:irq/12-fts_touc: 1540] fts_touch 7-0049: [R] tID:0 mc: 7 t
c:0 Ver[005683000]
<6>[10097.856316] [4:
busybox:22076] EXT4-fs (sda18): re-mounted. Opts:
norecovery
<6>[10097.858261] [5:
sh:22067] dyn_fsync_active_store: dyanamic fs
ync disabled
<6>[10097.915278] [1: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10097.915416] [2:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[10097.915434] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[10097.915481] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[10097.915519] [0: thread_hotplug:19286] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[10097.915533] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10097.915545] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10097.915678] [2:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[10098.657866] [3:
argosd: 3378] argos_pm_qos_notify: name:UFS, spee

d:117Mbps, prev level:-1, request level:0


<6>[10098.668303] [5:
argosd: 3378] argos_freq_lock name:UFS, CPU_MIN=0
, CPU_MAX=0, KFC_MIN=1300000, KFC_MAX=0, MIF=1264000, INT=400000
<6>[10098.690105] [5: kworker/u16:1:32448] binder: undelivered transaction 378
5193
<6>[10098.690173] [5: kworker/u16:1:32448] binder: undelivered transaction 378
5181
<6>[10098.715555] [0: thread_hotplug:19286] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[10098.715577] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10098.715589] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10098.733117] [0:
qmuxd: 3399] [mhi_uci_dump_log] uci_write: 01 0c
00 00 03 01 00 d1 19 43 00 00 00
<6>[10098.739671] [2: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26750
<6>[10098.739697] [2: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10098.739732] [0:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[10098.739749] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[10098.739764] [0:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work was
cancelled
<6>[10098.740400] [0:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[10098.749136] [3:
qmuxd: 4756] [mhi_uci_dump_log] uci_read: 01 8b
00 80 03 01 02 d1 19 43 00 7f 00 02 04 00
<6>[10098.848848] [5: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10098.848874] [7:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 3
<6>[10098.848887] [7:MHI_STATE_THREA: 4605] [process_M1_transition] Processing
M1 state transition from state 3
<6>[10098.848900] [7:MHI_STATE_THREA: 4605] [process_M1_transition] Allowing tr
ansition to M2
<6>[10098.849087] [7:MHI_STATE_THREA: 4605] [process_M1_transition] Starting M3
deferred work
<6>[10099.215494] [0: thread_hotplug:19286] frequency info : 1296000, prev_cmd
0, exe_cmd 4
<6>[10099.215515] [0: thread_hotplug:19286] lcd is on : 1, low power mode = 0,
dm_hotplug disable = 0
<6>[10099.215527] [0: thread_hotplug:19286] cluster1 cores hotplug out : 0
<6>[10099.669557] [1:
argosd: 3378] argos_pm_qos_notify: name:UFS, spee
d:62Mbps, prev level:0, request level:-1
<6>[10099.680008] [2:
argosd: 3378] argos_freq_unlock name:UFS
<6>[10099.856034] [3: kworker/u16:1:32448] [mhi_initiate_m3] Entered MHI state
4, Pending M0 0 Pending M3 0
<6>[10099.856154] [3: kworker/u16:1:32448] [mhi_initiate_m3] Triggering wake o
ut of M2
<6>[10099.863087] [1: MHI_EV_THREAD: 4604] [recycle_trb_and_ring] Cannot ring
DB state 4 link 1, ring type 2, index 0 db 0x5fa26790
<6>[10099.863163] [1: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10099.863314] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 2
<6>[10099.863363] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Entered
<6>[10099.863408] [1:MHI_STATE_THREA: 4605] [process_M0_transition] M3 work NOT
cancelled, either running or never started
<6>[10099.867877] [1:MHI_STATE_THREA: 4605] [process_M0_transition] Exited
<6>[10099.868103] [3: kworker/u16:1:32448] [mhi_initiate_m3] Cancelled M1 time
r, timer was active

<6>[10099.868364] [3: kworker/u16:1:32448] [mhi_initiate_m3] Waiting for M3 co


mpletion.
<6>[10099.880526] [3: MHI_EV_THREAD: 4604] [mhi_process_event_ring] MHI STE re
ceived ring 0x0
<6>[10099.880778] [1:MHI_STATE_THREA: 4605] [process_stt_work_item] Transitioni
ng to 5
<6>[10099.880828] [1:MHI_STATE_THREA: 4605] [process_M3_transition] Processing
M3 state transition
<6>[10099.881044] [3: kworker/u16:1:32448] [mhi_initiate_m3] M3 completion rec
eived
<6>[10099.881114] [3: kworker/u16:1:32448] [mhi_turn_off_pcie_link] Entered...
<6>[10099.892517] [3: kworker/u16:1:32448] mhi 0000:01:00.0: [debug] pmcsr reg
: b dev->current_state : 0
<6>[10099.892702] [3: kworker/u16:1:32448] mhi 0000:01:00.0: [debug] device_ve
ndor_id reg : 30017cb
<6>[10099.892820] [3: kworker/u16:1:32448] exynos-pcie 10ee0000.pcie0: ack mes
sage is ok
<6>[10099.892866] [3: kworker/u16:1:32448] exynos-pcie 10ee0000.pcie0: receive
d Enter_L23_READY DLLP packet
<6>[10099.892923] [3: kworker/u16:1:32448] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, start of poweroff, pcie state: 2
<6>[10099.893101] [3: kworker/u16:1:32448] exynos-pcie 10ee0000.pcie0: exynos_
pcie_poweroff, end of poweroff, pcie state: 0
<6>[10099.923171] [3: kworker/u16:1:32448] [mhi_turn_off_pcie_link] Exited...
<6>[10099.988497] [1:
init:
1] SysRq : Emergency Remount R/O
<6>[10100.002013] [1:
kworker/1:4:14113] EXT4-fs (loop0): re-mounted. Opts:
(null)
<6>[10100.004806] [1:
kworker/1:4:14113] EXT4-fs (sda20): re-mounted. Opts:
(null)
<6>[10100.006908] [1:
kworker/1:4:14113] EXT4-fs (sda17): re-mounted. Opts:
(null)
<6>[10100.008783] [1:
kworker/1:4:14113] EXT4-fs (sda16): re-mounted. Opts:
(null)
<6>[10100.019416] [1:
kworker/1:4:14113] EXT4-fs (sda21): re-mounted. Opts:
(null)
<6>[10100.035608] [1:
kworker/1:4:14113] EXT4-fs (sda19): re-mounted. Opts:
(null)
<6>[10100.038735] [1:
kworker/1:4:14113] EXT4-fs (sda3): re-mounted. Opts: (
null)
<6>[10100.043669] [1:
kworker/1:4:14113] EXT4-fs (sda18): re-mounted. Opts:
(null)
<4>[10100.046015] [1:
kworker/1:4:14113] Emergency Remount complete
<0>[10100.095219] [1:
init:
1] exynos-snapshot: normal reboot [exy
nos_ss_reboot_handler]
<0>[10100.095284] [1:
init:
1] exynos-snapshot: core register save
d(CPU:1)
<0>[10100.095325] [1:
init:
1] CPUMERRSR: 0000000000000000, L2MERR
SR: 0000000000000000
<0>[10100.095361] [1:
init:
1] exynos-snapshot: context saved(CPU:
1)
<0>[10100.095762] [1:
init:
1] sec_debug: set magic code (0x0)
<6>[10100.095930] [1:
init:
1] argos_cpuidle_reboot_notifier calle
d
<6>[10100.099204] [2:
init:
1] wake disabled for irq 565
<6>[10100.099248] [2:
init:
1] wake disabled for irq 566
<6>[10100.099309] [2:
init:
1] ext-mdm qcom,mdm1.52: Triggering md
m cold reset
<6>[10100.202270] [2:
init:
1] ext-mdm qcom,mdm1.52: gpio_get_valu
e(MDM2AP_STATUS) : 1
<6>[10100.305648] [3:
init:
1] ext-mdm qcom,mdm1.52: gpio_get_valu

e(MDM2AP_STATUS) : 1
<6>[10100.408958] [1:
init:
e(MDM2AP_STATUS) : 1
<6>[10100.459971] [2: irq/15-SSP_Int:
<6>[10100.512288] [3:
init:
e(MDM2AP_STATUS) : 1
<6>[10100.521637] [0:
Binder_8:
eout 0, flag 0, ret 0
<6>[10100.523434] [0:
Binder_8:
e = 8737, old_enable = 8705
<6>[10100.523494] [0:
Binder_8:
180000000ns
<6>[10100.523545] [0:
Binder_8:
, Sensor Type = 0x5, data = 180
<6>[10100.530874] [1:
Binder_8:
eout 0, flag=0, ret1
<6>[10100.615641] [3:
init:
e(MDM2AP_STATUS) : 1
<6>[10100.639860] [2: irq/15-SSP_Int:
<6>[10100.639860] [2: irq/15-SSP_Int:
<6>[10100.639860] [2: irq/15-SSP_Int:
<6>[10100.639860] [2: irq/15-SSP_Int:
<6>[10100.639860] [2: irq/15-SSP_Int:
<6>[10100.718981] [0:
init:
e(MDM2AP_STATUS) : 1
<6>[10100.823092] [2:
init:
e(MDM2AP_STATUS) : 1
<6>[10100.824934] [3:
Binder_7:
e = 8705, old_enable = 8737
<6>[10100.824997] [3:
Binder_7:
sor = 32, current state = 8705
<6>[10100.825047] [3:
Binder_7:
, Sensor Type = 0x5, data = 180
<6>[10100.925633] [1:
init:
e(MDM2AP_STATUS) : 1
<6>[10101.006260] [2: irq/15-SSP_Int:
, 0
<6>[10101.006260] [2: irq/15-SSP_Int:
<6>[10101.006260] [2: irq/15-SSP_Int:
<6>[10101.028958] [2:
init:
e(MDM2AP_STATUS) : 1
<6>[10101.132322] [2:
init:
e(MDM2AP_STATUS) : 1
<6>[10101.235649] [2:
init:
e(MDM2AP_STATUS) : 1
<6>[10101.338922] [2:
init:
e(MDM2AP_STATUS) : 1
<6>[10101.442309] [3:
init:
e(MDM2AP_STATUS) : 1
<6>[10101.536827] [2: irq/15-SSP_Int:
,0,0
<6>[10101.545660] [3:
init:
e(MDM2AP_STATUS) : 1
<6>[10101.648929] [3:
init:
e(MDM2AP_STATUS) : 1
<6>[10101.752301] [3:
init:
e(MDM2AP_STATUS) : 1
<6>[10101.855662] [3:
init:
e(MDM2AP_STATUS) : 1
<6>[10101.958952] [3:
init:

1] ext-mdm qcom,mdm1.52: gpio_get_valu


1775] [SSP] [M] PD: BaroDisabled
1] ext-mdm qcom,mdm1.52: gpio_get_valu
5655] [SSP] batch 5: delay 180000000, tim
5655] [SSP] set_sensors_enable: new_enabl
5655] [SSP] enable_sensor: add 32, New =
5655] [SSP] send_instruction: Inst = 0xa1
5655] [SSP] enable_sensor: delay 180, tim
1] ext-mdm qcom,mdm1.52: gpio_get_valu
1775]
1775]
1775]
1775]
1775]
1]

[SSP] [M] Add 5


batch rate = 220 180 0 0
save bak odr 5, 1, 60, 60, 0
save bak odr 5, 0, 180, 180, 120
AD 5 1 0 1, 60
ext-mdm qcom,mdm1.52: gpio_get_valu

1] ext-mdm qcom,mdm1.52: gpio_get_valu


5481] [SSP] set_sensors_enable: new_enabl
5481] [SSP] ssp_remove_sensor: remove sen
5481] [SSP] send_instruction: Inst = 0xa2
1] ext-mdm qcom,mdm1.52: gpio_get_valu
1775] [SSP] [M] save bak odr 5, 1, -1, 20
1775] save bak odr 5, 0, -1, 20, 0
1775] RM 5 0 0 0 60
1] ext-mdm qcom,mdm1.52: gpio_get_valu
1] ext-mdm qcom,mdm1.52: gpio_get_valu
1] ext-mdm qcom,mdm1.52: gpio_get_valu
1] ext-mdm qcom,mdm1.52: gpio_get_valu
1] ext-mdm qcom,mdm1.52: gpio_get_valu
1775] [SSP] [M] AR-0,947,6522,4747,180,20
1] ext-mdm qcom,mdm1.52: gpio_get_valu
1] ext-mdm qcom,mdm1.52: gpio_get_valu
1] ext-mdm qcom,mdm1.52: gpio_get_valu
1] ext-mdm qcom,mdm1.52: gpio_get_valu
1] ext-mdm qcom,mdm1.52: gpio_get_valu

e(MDM2AP_STATUS) : 1
<6>[10102.062257] [3:
init:
1]
e(MDM2AP_STATUS) : 1
<6>[10102.165611] [3:
init:
1]
e(MDM2AP_STATUS) : 1
<6>[10102.165841] I[0:
swapper/0:
0]
host ready val : 00000001
<6>[10102.165886] I[0:
swapper/0:
0]
dev ready val : 00000000
<6>[10102.254960] [2: irq/15-SSP_Int: 1775]
<6>[10102.254960] [2: irq/15-SSP_Int: 1775]
<6>[10102.254960] [2: irq/15-SSP_Int: 1775]
<6>[10102.254960] [2: irq/15-SSP_Int: 1775]
<6>[10103.068117] [0: thread_hotplug:19286]
<6>[10103.074416] [3:
init:
1]
<6>[10103.074467] [3:
init:
1]
2c
<3>[10103.075005] [1:
mdm_helper: 3355]
<4>[10103.074509] [3:
init:
1]
elapsed 0.007 seconds) done.
<5>[10103.087891] [3:
init:
1]
I cache
<6>[10103.092369] [0:
init:
1]
called!
<6>[10103.092428] [0:
init:
1]
<6>[10103.092476] [0:
init:
1]
<6>[10103.092873] [0:
init:
1]
, ret = 1
<6>[10103.093035] [0:
init:
1]
, ret = 1
<6>[10103.095708] [0:
init:
1]
ff
<6>[10103.096869] [0:
init:
1]
<6>[10103.097611] [0:
init:
1]
sr_smpl: disable WTSR
<6>[10103.097984] [0:
init:
1]
y_power_on: off
<3>[10103.098559] [0:
init:
1]
y_shutdown
<6>[10103.098623] [0:
init:
1]
_state
<6>[10103.098664] [0:
init:
1]
ber, 1
<6>[10103.098702] [0:
init:
1]
ber, 1
<6>[10103.099150] [0:
init:
1]
_state, led_num = 1, brightness = 0
<6>[10103.099497] [0:
init:
1]
_state
<6>[10103.099537] [0:
init:
1]
ber, 2
<6>[10103.099574] [0:
init:
1]
ber, 2
<6>[10103.099913] [0:
init:
1]
_state, led_num = 2, brightness = 0
<6>[10103.100252] [0:
init:
1]
_state
<6>[10103.100292] [0:
init:
1]
ber, 3
<6>[10103.100330] [0:
init:
1]

ext-mdm qcom,mdm1.52: gpio_get_valu


ext-mdm qcom,mdm1.52: gpio_get_valu
mdm_device_ready_irq_handler, irq:
mdm_device_ready_irq_handler, irq:
[SSP] [M] INT Occur 0
Uart task 1
G RX TMOUT!
RX DMA-1 800 8010400 (0)
stopped thread_hotplug
mailbox: apm -> hsi2c mode
APM device go to wfi, change to hsi
esoc REQ engine released from wait
Freezing user space processes ... (
sd 0:0:0:0: [sda] Synchronizing SCS
fts_touch 7-0049: FTS fts_shutdown
fts_touch 7-0049: fts_stop_device
fts_touch 7-0049: FTS INT Disable
fts_touch 7-0049: FTS Command (A1)
fts_touch 7-0049: FTS Command (90)
fts_touch 7-0049: fts_power_ctrl: o
max86900_shutdown
s2m-rtc s2m-rtc: s2m_rtc_disable_wt
sec_touchkey_driver 3-0020: touchke
sec_touchkey_driver 3-0020: touchke
leds-max77843-rgb: max77843_rgb_set
leds-max77843-rgb: max77843_rgb_num
leds-max77843-rgb: max77843_rgb_num
leds-max77843-rgb: max77843_rgb_set
leds-max77843-rgb: max77843_rgb_set
leds-max77843-rgb: max77843_rgb_num
leds-max77843-rgb: max77843_rgb_num
leds-max77843-rgb: max77843_rgb_set
leds-max77843-rgb: max77843_rgb_set
leds-max77843-rgb: max77843_rgb_num
leds-max77843-rgb: max77843_rgb_num

ber, 3
<6>[10103.100668] [0:
init:
_state, led_num = 3, brightness = 0
<6>[10103.101127] [0:
init:
p
<6>[10103.101397] [0:
init:
ber, 0
<6>[10103.102183] [0:
init:
ber, 1
<6>[10103.102775] [0:
init:
ber, 2
<6>[10103.103320] [0:
init:
ber, 3
<6>[10103.103864] [0:
init:
Charger driver shutdown
<6>[10103.104380] [0:
init:
<6>[10103.104584] [0:
init:
n +
<6>[10103.104695] [0:
init:
emove
<6>[10103.104739] [0:
init:
ree_irqs
<6>[10103.105539] [0:
init:
ree_irqs IRQ(525):muic-vdnmon free done
<6>[10103.106304] [0:
init:
ree_irqs IRQ(531):muic-mrxrdy free done
<6>[10103.107063] [0:
init:
ree_irqs IRQ(527):muic-mpnack free done
<6>[10103.107822] [0:
init:
ree_irqs IRQ(524):muic-vbadc free done
<6>[10103.107863] [0:
init:
set_irq
<6>[10103.107900] [0:
init:
qs
<6>[10103.108657] [0:
init:
qs IRQ(539):muic-vbvolt free done
<6>[10103.109453] [0:
init:
qs IRQ(535):muic-chgtyp free done
<6>[10103.110210] [0:
init:
qs IRQ(532):muic-adc free done
<6>[10103.110966] [0:
init:
qs IRQ(533):muic-adcerr free done
<6>[10103.111722] [0:
init:
qs IRQ(534):muic-adc1k free done
<6>[10103.111764] [0:
init:
n max77843->i2c_lock.count.counter=1
<6>[10103.111989] [0:
init:
n CTRL3: 0x00
<6>[10103.112031] [0:
init:
0 unregister
<6>[10103.112071] [0:
init:
<6>[10103.112108] [0:
init:
otifier
<6>[10103.112206] [0:
init:
egister: listener=(muic)0 unregister
<6>[10103.112247] [0:
init:
otifier: done.
<6>[10103.112286] [0:
init:
n <6>[10103.112402] [0:
init:

1] leds-max77843-rgb: max77843_rgb_set
1] leds-max77843-rgb: max77843_rgb_ram
1] leds-max77843-rgb: max77843_rgb_num
1] leds-max77843-rgb: max77843_rgb_num
1] leds-max77843-rgb: max77843_rgb_num
1] leds-max77843-rgb: max77843_rgb_num
1] max77843_charger_shutdown: MAX77843
1] func:max77843_charger_shutdown
1] muic-max77843:max77843_muic_shutdow
1] muic-max77843-hv:max77843_hv_muic_r
1] muic-max77843-hv:max77843_hv_muic_f
1] muic-max77843-hv:max77843_hv_muic_f
1] muic-max77843-hv:max77843_hv_muic_f
1] muic-max77843-hv:max77843_hv_muic_f
1] muic-max77843-hv:max77843_hv_muic_f
1] muic-max77843:max77843_muic_free_re
1] muic-max77843:max77843_muic_free_ir
1] muic-max77843:max77843_muic_free_ir
1] muic-max77843:max77843_muic_free_ir
1] muic-max77843:max77843_muic_free_ir
1] muic-max77843:max77843_muic_free_ir
1] muic-max77843:max77843_muic_free_ir
1] muic-max77843:max77843_muic_shutdow
1] muic-max77843:max77843_muic_shutdow
1] muic_notifier_unregister: listener=
1] muic_cleanup_switch_dev_cb: done
1] muic-max77843:muic_unregister_usb_n
1] usb_notify: usb_external_notify_unr
1] muic-max77843:muic_unregister_usb_n
1] muic-max77843:max77843_muic_shutdow
1] vfsspi_shutdown

<6>[10103.112454] [0:
init:
1] [SSP] ssp_shutdown:
<6>[10103.119301] [0:
init:
1] [SSP] ssp_send_cmd: command 0xd0 0
<6>[10103.119353] [0:
init:
1] [SSP] ssp_enable: enable = 0, old e
nable = 0
<6>[10103.119400] [0:
init:
1] wake disabled for irq 15
<6>[10103.121376] [0:
init:
1] [SSP] remove_mobeam
<6>[10103.121917] [3:ssp_sensorhub_t: 1783] [SSP] ssp_sensorhub_thread: kthread
_stop()
<6>[10103.210158] [1:
init:
1] [SSP] ssp_shutdown: done
<6>[10103.221346] [0:
init:
1] + decon_shutdown : id : 0
<6>[10103.227070] [0:
init:
1] dsim_disable ++
<6>[10103.227182] [0:
init:
1] MDD : s6e3ha2_wqhd_exit was called
<6>[10103.369676] [0:
init:
1] dsim_disable -<4>[10103.369739] [0:
init:
1] decon 13930000.decon_fb: pm_relax
<6>[10103.369785] [0:
init:
1] + decon_shutdown
<6>[10103.369849] [0:
init:
1] exynos-mipi-dsi 13900000.dsim: dsim
_shutdown +
<6>[10103.369885] [0:
init:
1] dsim->state : 2
<6>[10103.369926] [0:
init:
1] exynos-mipi-dsi 13900000.dsim: mipi
-dsi driver shutdown
<6>[10103.369969] [0:
init:
1] exynos-mipi-dsi 13900000.dsim: dsim
_shutdown <6>[10103.370222] [0:
init:
1] s3c2410_wdt: s3c2410wdt_shutdown sk
ipped
<0>[10103.370569] [0:
init:
1] Restarting system with command ''.
<0>[10103.370621] I[1:
swapper/1:
0] exynos-snapshot: skip context saved
(CPU:1)
<0>[10103.370649] I[3:
swapper/3:
0] exynos-snapshot: core register save
d(CPU:3)
<0>[10103.370677] I[2:
swapper/2:
0] exynos-snapshot: core register save
d(CPU:2)
<0>[10103.370710] I[5:
swapper/5:
0] exynos-snapshot: core register save
d(CPU:5)
<0>[10103.370731] I[4:
swapper/4:
0] exynos-snapshot: core register save
d(CPU:4)
<0>[10103.370748] I[6:
swapper/6:
0] exynos-snapshot: core register save
d(CPU:6)
<0>[10103.370765] I[7:
swapper/7:
0] exynos-snapshot: core register save
d(CPU:7)
<6>[10103.370786] [0:
init:
1] SMP: completed to stop secondary CP
US
<0>[10103.370821] I[3:
swapper/3:
0] CPUMERRSR: 0000000000000000, L2MERR
SR: 0000000000000000
<0>[10103.370848] I[2:
swapper/2:
0] CPUMERRSR: 0000000000000000, L2MERR
SR: 0000000000000000
<0>[10103.370871] I[5:
swapper/5:
0] CPUMERRSR: 0000000000000000, L2MERR
SR: 0000000000000000
<0>[10103.370886] I[4:
swapper/4:
0] CPUMERRSR: 0000000000000000, L2MERR
SR: 0000000000000000
<0>[10103.370899] I[6:
swapper/6:
0] CPUMERRSR: 0000000000000000, L2MERR
SR: 0000000000000000
<0>[10103.370912] I[7:
swapper/7:
0] CPUMERRSR: 0000000000000000, L2MERR
SR: 0000000000000000
<0>[10103.370927] I[3:
swapper/3:
0] exynos-snapshot: context saved(CPU:
3)
<0>[10103.370949] I[2:
swapper/2:
0] exynos-snapshot: context saved(CPU:
2)
<0>[10103.370968] I[5:
swapper/5:
0] exynos-snapshot: context saved(CPU:
5)
<0>[10103.370980] I[4:
swapper/4:
0] exynos-snapshot: context saved(CPU:

4)
<0>[10103.370992]
6)
<0>[10103.371004]
7)
<0>[10103.371331]
<0>[10103.371474]

I[6:

swapper/6:

0] exynos-snapshot: context saved(CPU:

I[7:

swapper/7:

0] exynos-snapshot: context saved(CPU:

[0:
[0:

init:
init:

1] sec_reboot (104, )
1] exynos_restart cmd:((null))

Samsung S-Boot 4.0 for SM-G920P (Oct 10 2016 - 10:27:03)


EXYNOS7420 EVT 1.3 (Base on ARM CortexA53)
3048MB / 0MB / Rev 10 / G920PVPS4CPJ1 / (PKG_ID 0x0) / LOT_ID N2XN4 / RST_STAT (
0x20000000)
__if_pmic_rev_init - MUIC API is not ready!
MON: 0x18(3)
MON[0] = (3)[0x1a, 0x34]
MON[1] = (4)[0x1a, 0x33]
MON[2] = (5)[0x1a, 0x32]
MON[3] = (6)[0x20, 0x3d]
MON[4] = (7)[0x42, 0x2e]
MON[5] = (0)[0x48, 0x3c]
MON[6] = (1)[0x15, 0x44]
MON[7] = (2)[0x0c, 0x17]
pmic_asv_init
(ASV_TBL_BASE+0x00)[11:0] bigcpu_asv_group
= 3276
(ASV_TBL_BASE+0x00)[15:12] bigcpu_ssa0
= 0
(ASV_TBL_BASE+0x00)[27:16] littlecpu_asv_group
= 3276
(ASV_TBL_BASE+0x00)[31:28] littlecpu_ssa0
= 0
(ASV_TBL_BASE+0x04)[11:0] g3d_asv_group
= 3276
(ASV_TBL_BASE+0x04)[15:12] g3d_ssa0
= 0
(ASV_TBL_BASE+0x04)[27:16] mif_asv_group
= 3276
(ASV_TBL_BASE+0x04)[31:28] mif_ssa0
= 0
(ASV_TBL_BASE+0x08)[11:0] int_asv_group
= 3276
(ASV_TBL_BASE+0x08)[15:12] int_ssa0
= 0
(ASV_TBL_BASE+0x08)[27:16] cam_disp_asv_group
= 3276
(ASV_TBL_BASE+0x08)[31:28] cam_disp_ssa0
= 0
(ASV_TBL_BASE+0x0C)[3:0] dvfs_asv_table_version = 11
(ASV_TBL_BASE+0x0C)[4]
asv_group_type
= 0
(ASV_TBL_BASE+0x0C)[7:5] reserved01
= 0
(ASV_TBL_BASE+0x0C)[8]
shift_type
= 0
(ASV_TBL_BASE+0x0C)[9]
ssa1_enable
= 0
(ASV_TBL_BASE+0x0C)[10]
ssa0_enable
= 0
(ASV_TBL_BASE+0x0C)[15:11] reserved02
= 0
(ASV_TBL_BASE+0x0C)[16]
asv_method
= 1
(ASV_TBL_BASE+0x0C)[31:17] reserved03
= 0
(ASV_TBL_BASE+0x10)[3:0] main_asv_group
= 0
(ASV_TBL_BASE+0x10)[7:4] main_asv_ssa
= 0
(ASV_TBL_BASE+0x10)[11:8] bigcpu_ssa1
= 0
(ASV_TBL_BASE+0x10)[15:12] littlecpu_ssa1
= 0
(ASV_TBL_BASE+0x10)[19:16] g3d_ssa1
= 0
(ASV_TBL_BASE+0x10)[23:20] mif_ssa1
= 0
(ASV_TBL_BASE+0x10)[27:24] int_ssa1
= 0
(ASV_TBL_BASE+0x10)[31:28] cam_disp_ssa1
= 0
(ASV_TBL_BASE+0x14)[8:0] bigcpu_ssa_ema
= 0
(ASV_TBL_BASE+0x14)[17:9] littlecpu_ssa_ema
= 0
(ASV_TBL_BASE+0x14)[26:18] g3d_ssa_ema
= 0
(ASV_TBL_BASE+0x14)[31:27] reserved04
= 0
chip_status = b, bin2_efuse = 0
muic_register_max77843_apis
muic_is_max77843 chip_id:0x43 muic_id:0xb5 -> matched.
MUIC rev = MAX77843(181)

init_multi_microusb_ic Active MUIC 0xb5


max77843_init_microusb_ic: MUIC: CDETCTRL:0x2d
max77843_init_microusb_ic: MUIC: CONTROL1:0x00
max77843_init_microusb_ic: MUIC: CONTROL2:0x3b
max77843_muic_get_adc_value: STATUS1:0x1f
max77843_muic_get_adc_value: ADC:0x1f
max77843_muic_get_adc_value: STATUS1:0x1f
max77843_muic_get_adc_value: ADC:0x1f
max77843_muic_get_chg_typ: STATUS2:0x00
max77843_muic_get_chg_typ: CHGTYP:0x00
max77843_muic_get_adc_value: STATUS1:0x1f
max77843_muic_get_adc_value: ADC:0x1f
max77843_muic_get_chg_typ: STATUS2:0x00
max77843_muic_get_chg_typ: CHGTYP:0x00
load Secure Payload done.
Chip ID : 07d68d816d08 / 0x00003100
EL3 monitor information => Built : 18:08:20, Mar 31 2016
bConfigDescrLock: 1
sw_lock success
sw_lock success
sw_lock success
SCSI CMD : 55 11 00 00 00 00 00 00 14 00
SCSI Response(01) : Target Failure
SCSI Status(02) : max77843_set_muic_uart_early: MUIC: CONTROL1: 0x00
max77843_muic_get_adc_value: STATUS1:0x1f
max77843_muic_get_adc_value: ADC:0x1f
[Debug Info.]
S-BOOT : VERSION_-+F0
SecureOS : 20 (MB)
- read_bl1
blk_bread_bootsector: LUN 1, from 0x0, size 0x10, buffer 0x45708000
Verify_Binary_Signature 0x45720120 3344@0x45710000, 256@0x45720020
pit_check_signature (PIT) valid.
PARAM ENV VERSION: v1.0..
blk_bread_bootsector: LUN 1, from 0xffe, size 0x1, buffer 0x441204c8
initialize_ddi_data: usable! (2:0xe), warranty reason : (0x0500)
MAGIC_RAM_BASE: 0, MAGIC_RAM_BASE2: 6e6f69, ompin: 2000a
[ldfw] Pass LDFW partition!
[ldfw] read whole CM partition from the storage
ldfw: 0th ldfw's version 0x20151027 name : CryptoManagerV20
ldfw: 1th ldfw's version 0x20151203 name : fmp_fw
ldfw: init ldfw(s). whole ldfws size 0x204110
[ldfw] try to init 2 ldfw(s). except 0 ldfw 2 ldfw(s) have been inited done.
[mobi_drv] add: 0x43e73000, size: 11401
MobiCore IDLE flag = 0
MobiCore Driver loaded and RTM IDLE!
[OTP] 27 bit read: 0xd
[OTP] 22 bit read: 0x0
[OTP] 21 bit read: 0x0
[OTP] 23 bit read: 0x1
[OTP] 26 bit read: 0x3
[OTP] NANTIRBK0 bit reading: start
[OTP] NANTIRBK0: 4 bit
[OTP] 28 bit read: 0x1
[OTP] 29 bit read: 0x0
[OTP] 30 bit read: 0x1
[OTP] 25 bit read: 0x1
[OTP] ETC value: 0

[EFUSE] SMC Read the 0x0 ...


[EFUSE] SMC Read Count value: 4
[EFUSE] SMC Read the 0x1 ...
[EFUSE] SMC Read Count value: 1
[EFUSE] SMC Read the 0x2 ...
[EFUSE] SMC Read Count value: 0
[EFUSE] SMC Read the 0x3 ...
[EFUSE] SMC Read Count value: 1
(2,13) vs (2,13)
[EFUSE] This is commercial device.
set_tzpc_secureport: successfully protected 0
eSE Protection!!
Authenticated data read request (Swapped)
Authenticated data read response (Swapped)
RPMB: get hmac value: success
HMAC compare success !!
update_rpmb_version skip.
initialize_secdata_rpmb: usable! (0x52504d42)
DDR SIZE: 3G (0xc0000000)
LPDDR4 manufacturer : Samsung
bin2_efuse = 0
[TMU] 37, 41, 40, 40
UFS vendor: SAMSUNG
FW rev : 0200
product : KLUBG4G1BD-E0B1
UFS size (GB) : 32
UFS ID : 02157DF271B5CB31
lun:196 Query Response : 0xfc
lun:196 Query Response : 0xfc
lun:196 Query Response : 0xfc
lun:196 Query Response : 0xfc
dNumAllocUnits error at LU7 0 0
PROVISION : FAIL
PROVISION : FAIL
max77843_muic_api_print_init_regs: INTMASK[1:0x00, 2:0x00, 3:0x00]
max77843_muic_api_print_init_regs: MUIC: CDETCTRL:0x2d
max77843_muic_api_print_init_regs: MUIC: CONTROL1:0x00
max77843_muic_api_print_init_regs: MUIC: CONTROL2:0x3b
max77843_muic_api_print_init_regs: MUIC: CONTROL3:0x00
max77843_muic_api_print_init_regs: MUIC: CONTROL4[0x16]:0xb2
init_ific : MAX77843(0)
init_ific : MAX77843(0)
set_float_voltage: max77843 battery cv voltage 0x9c
set_charger_state: buck(1), chg(1), reg(0x05)
max77843_get_charger_status: Invalid charger
set_auto_current: get_charger_status(0)
max77843_muic_get_adc_value: STATUS1:0x1f
max77843_muic_get_adc_value: ADC:0x1f
max77843_muic_get_chg_typ: STATUS2:0x00
max77843_muic_get_chg_typ: CHGTYP:0x00
max77843_muic_get_adc_value: STATUS1:0x1f
max77843_muic_get_adc_value: ADC:0x1f
max77843_muic_get_chg_typ: STATUS2:0x00
max77843_muic_get_chg_typ: CHGTYP:0x00
get_wireless_charger_detect: wireless check 0
get_wireless_charger_detect : CHG_DTLS(0x00)
set_auto_current: unknown_state, curr(475)
max77843_get_charger_status: Invalid charger

get_wireless_charger_detect: wireless check 0


get_wireless_charger_detect : CHG_DTLS(0x00)
set_charger_current: chg curr(137), in curr(0)
max77843_get_charger_status: Invalid charger
get_wireless_charger_detect: wireless check 0
get_wireless_charger_detect : CHG_DTLS(0x00)
fuelguage : wpc_status(0)
set_charger_state: buck(1), chg(0), reg(0x04)
init_fuel_gauge: Start!!
init_fuel_gauge : MAX77843(0)
max77843_muic_get_adc_value: STATUS1:0x1f
max77843_muic_get_adc_value: ADC:0x1f
adc_read_temp temp_adc = 1854
init_fuel_gauge temp = 25
init_fuel_gauge : MAX77843(0)
init_fuel_gauge: Battery type : SDI, capacity: 5177, status: 128
init_fuel_gauge: Already initialized (0x1439, SDI type)
check_validation_with_tablesoc: Start!!
fuel_gauge_read_soc: SOC(90), data(0x5a29)
fuel_gauge_read_ocv: VFOCV(4198), data(0xd1ee)
calculate_table_soc : low(8) high(15) mid(7) table_soc(0)
calculate_table_soc : low(12) high(15) mid(11) table_soc(0)
calculate_table_soc : low(12) high(12) mid(13) table_soc(0)
calculate_table_soc : low(13) high(12) mid(12) table_soc(0)
calculate_table_soc: vcell [4198] table_soc [84]
differ(6), table_soc(84), RepSOC(90)
max77843_muic_get_adc_value: STATUS1:0x1f
max77843_muic_get_adc_value: ADC:0x1f
max77843_muic_get_chg_typ: STATUS2:0x00
max77843_muic_get_chg_typ: CHGTYP:0x00
fuel_gauge_read_vcell: VCELL(4050), data(0xca8c)
vcell(4050),soc_diff_limit(40), low_temp_reset(0)
fuel_gauge_read_ocv: VFOCV(4198), data(0xd1ee)
fuel_gauge_read_vcell: VCELL(4050), data(0xca8c)
fuel_gauge_read_soc: SOC(90), data(0x5a29)
fuel_gauge_read_vfsoc: VFSOC(83), data(0x53c4)
init_fuel_gauge : OCV(4198), VCELL(4050), SOC(90), VFSOC(83)
AP_PMIC_SDA
= 1
PMIC_ID
= 0x12
OTP:0x78 PWR_SEQ:1 G3D_OCP:1 PSoff:1 INT_Volt:1
PMIC_STATUS1
= 0x1e JIGONB ACOKB MR2B MR1B
PMIC_STATUS2
= 0x11 RTC60SE RTC1SE
PMIC_PWRONSRC = 0x01 PWRON
PMIC_OFFSRC
= 0x00
PMIC_INT1
= 0x00
PMIC_INT2
= 0x11 RTC60S RTC1S
PMIC_INT3
= 0x80 RSVD
PMIC_RTC_CTRL = 0x02
PMIC_RTC_SMPL = 0x03
RTC TIME: 2016-11-17 16:24:05(0x10)PM
s5p_check_keypad: 0x0
s5p_check_reboot_mode: INFORM3 = 12345670 ... skip
ATLAS_PLL = 1200MHz
APOLLO_PLL = 1200MHz
MIF_PLL = 3104MHz
MFC_PLL = 468MHz
CCI_PLL = 532MHz
BUS0_PLL = 1600MHz
BUS1_PLL = 668MHz
board_uart_rustproof ifc_sense: 0
-user build & not FAC
-rustproof mode Enabled
s5p_check_upload: MAGIC(0x0), RST_STAT(0x20000000)
max77843_muic_get_adc_value: STATUS1:0x1f

max77843_muic_get_adc_value: ADC:0x1f
s5p_check_upload: debug level is LO! (mask: 0x0)
max77843_ific_set_mrstb: TOPSYS: MAINCTRL1[0x02]: [0x07]+[0x07]->[0x07]
s5p_check_upload: disable dump_gpr
s5p_check_download: 0
max77843_muic_get_adc_value: STATUS1:0x1f
max77843_muic_get_adc_value: ADC:0x1f
max77843_get_charger_status: Invalid charger
get_wireless_charger_detect: wireless check 0
get_wireless_charger_detect : CHG_DTLS(0x00)
check_pm_status: normal reset, do not enter LPM mode.
scr_draw_image: draw 'logo.jpg'...
read 'logo.jpg'(112504) completed.
board_set_dev_pm: s2mpb02 enable for display
40, 0, 13, 0x400013
DETECTED LCD TYPE : S6E3HA2
mipi-dsi driver(CMD mode) has been probed.
decon-int: ver0, max win7, command mode, hw trigger
single dsi mode
decon0 registered successfully
challenge_size is 4b 75
secure info base: 45720000 and SMC Num = 0x83000013
secure smc success!!! [ret = 0]
DMV: Successfully informed TZ of boot mode: Normal
load_kernel: loading boot image from 106496..
kernel size = 0x159b000, ramdisk size = 0x544800
dt_size:720896, dt_actual:720896
Verify_Binary_Signature 0x45720120 28901408@0x40204800, 256@0x45720020
Kernel Image
Verify_Binary_Signature: failed.(-18022398)
pit_check_signature (BOOT) invalid.
[TIMA trusted boot]: SEANDROID ENFORCING
Set invalid sign flag
No need to update kernel type.
update_frp_image_lock_value: Status for BOOT image is already custom
update_frp_lock_value: Status of ALL image official
challenge_size is 4b 75
[EFUSE] warranty bit is already set.
ace_hash_sha_digest: passed.(0)
tboot ctx base: 45720248
SMC Num = 0x83000001
mobismc success!!! [ret = 0]
SMC Num = 0x83000007
mobismc for tima info success!!! [ret = 0]
Pass. DTBH size is smaller than a page.
<dtbh_header Info>
magic:0x48425444, version:0x00000002, num_entries:0x00000004
<device info>
chip_id:
platform_id:
subtype_id:
hw_rev:

0x00001cfc
0x000050a6
0x217584da
0x0000000a

dt_entry[03]
chip_id: 0x00001cfc

platform_id: 0x000050a6
subtype_id: 0x217584da
hw_rev: 0x0000000a
hw_rev_end: 0x000000ff
offset: 0x00084000
dtb size: 0x0002c000
Selected entry hw_ver : 10
dt_entry of hw_rev 10 is loaded at 0x4a000000.(180224 Bytes)
[EFUSE] RB count: device(0x4), binary(0x4)
[OTP] SW LOCK Success
DDI value :0x0000000e
sw_lock success
sw_lock success
Forced Enable KAP
Warranty Bit Set - Blowing KAP_VIOLATION_FUSE
KAP status = 5afe0003
ATAG_CORE: 5 54410001 0 0 0
ATAG_MEM: 4 54410002 20000000 40000000
ATAG_MEM: 4 54410002 20000000 60000000
ATAG_MEM: 4 54410002 20000000 80000000
ATAG_MEM: 4 54410002 20000000 A0000000
ATAG_MEM: 4 54410002 20000000 C0000000
ATAG_MEM: 4 54410002 1E800000 E0000000
ATAG_SERIAL: 4 54410006 2157df2 71b5cb31
ATAG_INITRD2: 4 54420005 43000000 544476
ATAG_REVISION: 3 54410007 a
check_rustproof [0,0] On
ucs flag is Unknown
ucs flag : 00 00 00 00
ATAG_CMDLINE: fa 54410009 'console=ram loglevel=4 androidboot.baseband=mdm2 sec_
debug.level=0 sec_watchdog.sec_pet=5 androidboot.hardware=samsungexynos7420 andr
oidboot.debug_level=0x4f4c sec_debug.enable_cp_debug=0 androidboot.cp_debug_leve
l=0x55FF ess_setup=0x46000000 sec_tima_log=0x200000@0x48002000 sec_avc_log=0x400
00@0x48204000 charging_mode=0x3000 s3cfb.bootloaderfb=0xe2a00000 lcdtype=4194323
consoleblank=0 lpj=239616 sec_debug.reset_reason=7 ehci_hcd.park=3 oops=panic p
mic_info=35 cordon=c2277a87f2e1d28ff636b04284b7cbf0 connie=SM-G920P_SPR_USA_3f9b
9f5b2d68ae2cd3831ff4ebf3bb8d fg_reset=0 androidboot.emmc_checksum=3 androidboot.
boot_salescode= androidboot.odin_download=1 androidboot.bootloader=G920PVPS4CPJ1
androidboot.selinux=enforcing androidboot.security_mode=1526595585 androidboot.
ucs_mode=0 androidboot.hw_rev=10 androidboot.warranty_bit=1 androidboot.hmac_mis
match=0 androidboot.sec_atd.tty=/dev/ttySAC1 androidboot.serialno=02157df271b5cb
31 snd_soc_core.pmdown_time=1000 androidboot.fmp_config=0'
ATAG_NONE: 0 0
pack_atags: ramdisk size start 0x43000000, size 0x544476
Updating device tree @0x4a000000: done
Starting kernel at 0x40205000...
SWITCH_SEL(3)
BOOTING TIME : 2453

Das könnte Ihnen auch gefallen