Beruflich Dokumente
Kultur Dokumente
Material Handling
Food Safety
Lab Safety
O U P R E P A R E D ?
ARE Y
Facility Protection
CSC is the leading compliance solutions company in Canada! We listen to your comments
and develop solutions together with you. CSC is your Best Choice for your workplace
compliance product solutions.
About us
CSC Inc. is the most cost competitive and most convenient way to become compliant!
Guaranteed!
Team expertise
Our highly knowledgeable team comprises a staff of professionals in areas of Environmental
Protection, Health & Safety, Material Handling/Storage, Food Safety and Facility management
delivering products for guaranteed compliance achievement.
Meets UL Standards
$868.9
Product fit for Lab
environment
10-13
10-21
9
Meets ANSI Standards
NFCC Part 4 - Where the quantity of flammable substances being used in any one area exceeds 50 litres, they shall be stored in an approved fire-rated storage cabinet.
EPA Ch. E19, Part 2 You need to store flammables in a safety storage cabinet to protect from discharging a contaminant into the natural environment.
EPA Ch. E19, Part 10 Spill prevention and spill contingencies need to have a Door sill raised 2 above the bottom of the cabinet and 2 space between the inner and
outer walls to prevent the risk of pollutants causing damage to environment
OHSA Reg. 851, s. 22 Flammable liquids must be stored in a metal cabinet of double wall construction with a 3 point door latch and a liquid-tight door sill raised
at least 50 mm (2 inches) above the floor. FM 6050 Approved - Steel Cabinets require a double wall construction with a 1 1/2 space between the inner and outer wall.
Steel thickness should be no less than 18 ga. and the doors of the cabinet require a lockable non-sparking three point latch. To contain accidental spills a sump or pan
of 2 deep must be available inside the cabinet. Steel Cabinets also must have two vents diagonally set across from each other with flame arresters and grounding wire
.
NFCC Part 4
NFPA Code 30
EPA Ch. E19, Part 2
EPA Ch. E19, Part 10
OHSA Reg. 851, s. 22
FM 6050 Approval
24 gauge steel
Spring loaded lid relieves internal pressure at 5 psi
Flame arrestor protects the flammable contents of
the can from exterior sources of ignition
One-hand grip-to-open pour spouts
Integral pressure-relief on Type II pour spouts
NFPA Code 30
ULC C30 Listed
COHSA Part 10 A
EPA Ch. E19, Part 10
AARC Part 10
FM 6051 Approval
FM 6052 Approval
NFPA 58 113 Cylinders are stored upright and protected from physical damage and CGA B 149.9 M91 All cylinders will be protected from physical
secured against tampering. damage and tampering.
CSA B149.2 Store propane cylinders separated from other compressed gases and OHSA Reg. 851, s. 49 Cylinders need to be secured while in storage
flammables. Storage Cabinets for LPs and Oxygen Gas cylinders will be vented to prevent and be protected from physical damage.
accumulation of gases.
NFCC Part 4
ULC C142.6-2000
FM 6049 Approved
NFPA Code 77
EPA Ch. E19, Part 2 Applications:
EPA Ch. E19, Part 10
OHSA Reg. 851
Battery recharging, battery storage, bulk / pallet storage,
chemical storage, corrosive storage, covered storage, cylinder
/ compressed gas storage, emergency showers, explosive
magazines, flammable storage, folding storage, fuel cache
storage, municipal waste sites, pan storage, pesticide storage,
pressure test enclosure, process rooms, remote locations,
siteing solutions, special applications
ULC C142.6 Listed Natural ventilation louvers do not allow the accumulation of explosive of grounding the building and individual liquid containers shall be
vapor and air mixtures. Contents inside the structure are not accessible to unauthorized provided. The sump shall be constructed of heavy gauge steel with
persons offering suitable vandalism protection. Extreme weather conditions do not weaken continuously welded leak-tight seams. The interior of the sump shall
the sumps capabilities to contain a spill. be coated with a corrosion-resistant material.
FM 6049 Approval performance requirements for structures designed to provide a EPA Ch. E19, Part 10 Liquid tight sump constructed of
safe, secure storage and/or dispensing area for flammable liquids. Building walls, roofs fire resistant materials which reduce or prevent the risk
and doors shall be of steel construction or utilize other non-combustible materials. A of pollutants causing damage to the natural environment
leak-tight sump, capable of containing at least 25 percent of the liquid storage capacity
of the building or the largest individual container, whichever is greater. A suitable means
EPA Ch.
E19, Part 10
EPA Ch.
E19, Part 10
A. B.
Drum Bogie Mobile Spill Control Platform Truck
Mobile dispensing unit protects against incidental spill and leaks from Safe and secure transporting, filling and storing
30, 55, and 95 gallon drums 2000 lb. capacity
The durable polyethylene bogie resists corrosion and features a poly 30 gallon spill capacity
push-pull handle and 5 swivel casters for maximum stability, load
capacity and maneuverability
EPA Ch. E19, Part 10 Spills and leaks during the transport of liquids will be contained to prevent damage to the environment
OHSA Reg. 851 Transporting dangerous liquids that prevents injury or endangers the health of the worker
EPA Reg. 347 Waste stored above ground will have secondary containment system capable of containing leaks or spills and prevent spills from entering municipal sewers
or the environment
Drum Basin
Features
Optional ramp and low profile for easier loading and
unloading
30-gallon spill capacity per 2-drum unit
High density polyethylene construction for superior
strength and chemical resistance EPA Ch. E19, Part 10
EPA Reg. 347
Removable poly grating for easy cleaning
OHSA Reg. 851
Each 2-drum unit includes one 2ft U channel connector
to join units
The 6 and 9-drum units provide for added storage C
capability and easier access to drums
EPA Ch. E19, Part 10 Dangerous liquids stored above ground will be contained to prevent damage to the environment
EPA Reg. 347, s. 54 Secondary containment systems will be used to prevent escaped liquids from entering the municipal sewers or environment
Drain Seal
Lightweight and reversible spill control for emergencies
Constructed of solid urethane
Spill Berm
Will bend and turn to fit almost any form
Can be cut to various lengths
SpillBerm Plus-Taller- able to divert larger spill volume
Non-absorbent and chemical resistant
Easily cleans with soap and water
EPA Ch. E19, Part 10
Multiple units are easily and quickly connected
OHSA Reg. 851 Spill Berm Low Profile1 3/8 tall berm
Interlocking end joints
Poly Spillpallets
A B
Holds up to 2,000 lbs UDL Rated at 6,000 lbs. UDL weight with a
Able to be moved with standard forklift 83 U.S. Gal. sump capacity
Removable grates for easy cleaning Two removable grates with optional drain
58 U.S. Gal. sump capacity 4-way fork access
Ideal for storage and dispensing of chemicals and helps keep your
work area free and clean of contamination
All components are 100% polyethylene for durable chemical
resistance
Units are designed to interlock into spill pallet grating for stable
drum storage
Shelf attaches easily and allows for filling more than one container
at a time
Stackers let you double up on storage in the same floor space and
the Double Stackers are able to be fork lifted
Hazard Hut
Outdoor hazardous materials storage for up to four 55 gallon drums
One piece moulded-100% polyethylene means there are no joints or seams to leak
Side vents reduce fumes
Removable grates make it easy to clean the 72 gallon sump EPA Ch. E19, Part 10
Big double doors provide easy access EPA Reg. 347, s. 54
Four way forklift makes the Hazard Hut easy to handle
EPA Ch. E19, Part 10 Hazardous liquids stored above ground must be contained to prevent contamination of the environment
EPA Reg. 347, s. 54 Hazardous liquids storage must be equipped with a secondary containment systems to prevent spills from contaminating the
municipal sewers or the environment
UN 1H2/X113 Hazardous waste must be Over-packed to ensure safe and secure transporting preventing personal and environmental damages
UN HM 181 Salvage Drums must be properly sealed to ensure environmental and workers safety during handling and transport
2 Drum Workstation
Available in low or high
profile for the storage of two
drums
High profile accomodates
drum pump
EPA Ch. E19, Part 10
EPA Reg. 347, s. 54
Overpack Drum
The overpacks feature a heavy duty metal lever locking
band: ideal for the storage, transportation, clean up and spill
containment of larger containers
Salvage Drums
Wheeled Overpack
A Salvage Drum and dolly all in one, they eliminate the
need for a separate dolly for transportation.
The 95-gallon, and the 50-gallon polyethylene UN
rated Salvage Drums have built-in handles
6 Polyolefin wheels that allow for easy steering
through doorways or around any obstacle.
They are also ideal for Spill Kits.
Drum Faucets C
Poly Funnel
The Poly-Funnel works well for the collection of spent fluids
and the drainage of smaller containers.
Manufactured from corrosion resistant polyethylene, the Poly
Funnels will not rust with the use of corrosives or acids.
FM 6031
Approved
FM 6031 Approved Self Closing valve with a flame arrester to prevent ignition of the contents of the drum preventing personal and
environmental damages EPA Ch. E19, Part 10 Spill Kits to prevent chemicals from accidentally leaking into nearby ground water
and soil NFPA Code 70 Tools made out of aluminum to prevent igniting the content of the drum preserving the environment and the workers
health OHSA s. 27 Tools that provide appropriate injury prevention
A B
Bung Access Funnels
The only full drum top funnel which allows access to the drum bung
EPA Ch. E19, Part 10 Optional hinged cover keeps dirt out of your waste stream
- Prevent chemicals
6 gal capacity
from accidentally
leaking into nearby
ground water and soil
Drum Pumps
A.
A Chrome Plated steel drum pump
A B C D
OHSA s. 27
Drum Heaters
Heats materials with good heat receptivity
Made of aluminized steel; conjunction box made of galvanized steel
Increases flow rate of viscous material
Reaches and maintains a given temperature
Thermostat bulb senses temperature and controls pre-set heat
Three-heat switch allows three wattage ratings per thermostat setting
HIGH setting uses Max. Watts; MEDIUM, 1/2 Max. Watts; LOW, 1/4 Max. Watts
OHSA s. 27 Neon pilot light
6 power cord
EPA Ch. E19, Part 10 At storing, decanting or transporting hazardous liquids eventual Spills and Leaks must be contained or captured with spill kits and absorbents to prevent
contamination of the environment
Oil only sorbents have fast-wicking fibers absorb 25 times their weight in
hydrocarbons
Universal sorbents are designed to pick-up aggressive hydrocarbon (oil and water) spills.
EPA Ch. E19, Part 10 Suitable for non-aggressive acids, caustics, coolants, solvents, water and solutions
A B
250 L Kits
100 sorbent pads
4 sorbent socks - 3 x 10
4 sorbent socks - 3 x 4
4 sorbent pillows - 18 x 18
1 bag granular absorbent
1 neoprene drain cover
3 disposal bags
2 pair safety goggles
2 pair gloves EPA Ch. E19, Part 10
60 L SPILL Kits
20 sorbent pads
3 sorbent socks
2 sorbent pillows
2 disposal bags
1 pair safety goggles EPA Ch. E19, Part 10
1 pair gloves
Audible and visible alarms This Unit detects a wide variety of gases,
Low power semi-conductor sensor including some toxic gases and nuisance
Sensitivity: 50 ppm methane vapors such as Natural Gas, Propane,
Response Time: less than 2 seconds Butane, Methane, Acetone, Ammonia,
Alarm Limit: At 10% LEL for methane Carbon Monoxide, Gasoline, Jet Fuel Canada Labour Code,
Sec. 125
Battery life: 8 hours of continuous use. Hydrogen Sulfide, and Industrial Solvents.
Canada Labour Code, Sec. 125 Employers must ensure that machinery, equipment and tools used by their workers meet mandatory health, safety and ergonomic standards.
Thermo-Anemometer
Designed to provide fast and accurate air velocity and
Canada Labour Code, temperature reading
Sec. 125
Separate rotating vane anemometer sensor
Large 3 digit LCD readout
Data hold and Max hold functions
Air Velocity Range: 0.0 to 45.0 m/s,0.0 to 140.0 kph; 0.0 to
88.0 knots
Temperature Range: 0 to 60.0 C; 32.0 to 140 F
Meters are simple to usejust dip probe into test liquid, then rinse with clean water after each
use. Sample contamination due to inadequate probe cleaning between measurements is virtually
eliminated. Meters are made from ABS plastic and are factory calibrated to ensure accuracy. Custom
ranges other than the ranges offered are availablecall our Application Specialists for details.
SPECIFICATIONS
Specific gravity range 1.000 to 1.300
Specific gravity resolution 0.001 SGU
Specific gravity accuracy 0.03 SGU
Temp range 0 to 50C
Temp resolution 0.1C
Temp accuracy 0.8C
Max sample viscosity 400 cp
Canada Labour Code, Probe immersion depth 5
Sec. 125
Display two-line, alphanumeric LCD; backlit
pH Meter
Multifunctional unit combining pH,mV and temperature measurement
Dual display for pH or mV and temperature pH Range: 0 to 14 pH
C/F switchable Resolution: 0.01 pH
Large LCD with 36mm (1.4) high digits Accuracy: (0.03%+ 2 digits) Canada Labour Code,
MAX/MIN/AVG readings stored in memory mV Range: 0 to 1999 mV Sec. 125
Automatic display hold and out of range indications
Resolution: 1.0 mV
Manual or automatic temperature compensation
RS-232 serial interface Accuracy: (0.5%+ 1 digit)
Optional data acquisition software Temperature Range: 0 to 65C / 32 to 149F
pH electrode sold separetely Resolution: 0.1C/0.1F
Accuracy: 1C/1.8F
Salt Meter
Large LCD display
Automatic temperature compensation Canada Labour Code,
Sampling Rate: 0.4 second Sec. 125
Data Hold function
Includes probe and batteries
Range: 0 to 10% salt
Pocket penetrometer
Canada Labour Code, Easy to use with easy to read results
Sec. 125 Easy to read scale indicates strength from 0-4.5 tons per sq foot
Reading is maintained until manually reset
WSI Act Reg. 1101 - A first aid box must contain the first aid utensils required by WSI Act Reg. 1101 ONTARIO
the province and all items in the box must be maintained in good condition at all times AOHS R.Q.C. A 3, R.8.2 QUEBEC
WSI Act Reg. 1101 - Employers must inspect first aid boxes and their contents OHSA Reg. 91 NEW BRUNSWICK
every 3 months or as often as necessary N.S. Reg. 104 NOVA SCOTIA
COHSA Part 16 - FEDERAL OHSA C. 8 s. 221 PRINCE EDWARD ISLAND
OHSA Part 3 BRITISH COLUMBIA OHSA Reg. 1148, s. 110 NEWFOUNDLAND & LABRADOR
OHSA Part 11 ALBERTA OHSA Reg. 164, s. 51 - YUKON
OHSA Part 5 - SASKATCHEWAN Safety Act R.S.N.W.T C. S 1 NORTHWEST TERRITORIES / NUNAVUT
WHSA Part 5 MANITOBA
B A
ANSI Z358.1
OHSA Reg. 851 s. 124
ANSI Z358.1 Eye Wash Stations must be a One Second operation with a minimum of 15 minutes flush time and must be placed within a
10 seconds radius from hazard
OHSA Reg. 851 s. 124 If there is a possibility for an eye injury you need an eyewash station
B
Portable Emergency Eyewash
A 10 Gal. Portable Eyewash
Eyewash Flow: 15 minutes
Drench Hose Flow: 3 minutes
B
15 Gal. Portable Eyewash ANSI Z358.1
Eyewash Flow: 22 minutes OHSA Reg. 851
Drench Hose Flow: 4 minutes s. 124
ANSI Z358.1
OHSA Reg. 851
s. 124
D
Four wheel transport truck
For use with fixtures without a heater jacket
ANSI Z358.1
OHSA Reg. 851
s. 124
A
Combination shower and eyewash features the revolutionary AXION MSR eye
wash and eye/face wash head assembly
This inverted flow design is the only product on the market that sweeps
contaminants away from the vulnerable nasal cavity
This also offers a new hydrodynamic shower design that minimizes the strong
physical pressure that drives the water to the outer rim making the distribution
equal across the entire footprint of the flow
This unit feature a round 11 stainless steel receptor
B
Combination shower and eyewash features the revolutionary AXION MSR eye
wash and eye/face wash head assembly
This inverted flow design is the only product on the market that sweeps
B contaminants away from the vulnerable nasal cavity
This also offers a new hydrodynamic shower design that minimizes the strong
physical pressure that drives the water to the outer rim making the distribution
equal across the entire footprint of the flow
This unit feature a round 11 green ABS plastic receptor
C
This unit features a 10 5/8 ABS plastic showerhead and twin ABS plastic anti-
surge eyewash heads all with integral flow controls and a stainless steel dust
cover that opens with push flag
Raised, circular stainless steel spray ring offers 16 spray openings to bathe
entire facial area
D D
Combines the use of a stainless steel showerhead, anti-surge soft-flo eyewash
ANSI Z358.1 heads, and face spray ring for the irrigation process
OHSA Reg. 851 The combination unit is equipped with an in-line 50 x 50 mesh water strainer
s. 124 and stainless dust cover, so when debris is present the irrigation process stays
protected
Great addition to unsafe environments where the eyes, face, and body may be
exposed to corrosive materials
E
Drench shower features a 10 5/8 ABS plastic head in Safety Green
A stainless steel pull rod operates a stay-open chrome-plated brass ball valve
that is equipped with a stainless steel stem
This particular model has an integral flow control and is wall mounted with a 1
IPS hot dip galvanized steel pipe
ANSI Z358.1
OHSA Reg. 851
s. 124
Sentinel Series Eyewear
Super lightweight wraparound design for men and women
Rubberized temple tips and integrated nosepiece
Impact resistant polycarbonate lens provides 99.9% UV protection and
scratch resistant coating
ANSI Z358.1
OHSA Reg. 851
s. 124
Sold in case lots
NO. DESCRIPTION CASE LOT PRICE
13-0841-00 Clear Lens, Direct Vent, 12 $2.80
13-0843-00 Clear Lens, Indirect Vent 12 $5.90
ANSI Z358.1
Face Shields OHSA Reg. 851
s. 124
ANSI Z87.1 Personal Protection Equipment must provide adequate protection against the hazards for which they are used, be reasonably comfortable, fit securely without
interfering with movement or vision, be capable of being disinfected if necessary, and be easy to clean, be durable , and fit over or incorporate prescription eyewear OHSA Reg.
851, s. 130 - Every worker is required to wear personal protection equipment who is exposed to a physical and / or chemical hazards CSA Z94.2 Every worker is required to
wear proper hearing protectors effectively reducing noise by a minimum of 20db CSA Z94.3 - Every employee exposed to sounds exceeding 85db must wear a hearing protector
that meets the requirements set out in CSA Standard Z94.2. CSA Z94.4 - Every worker is required to wear safety eyewear to protect from physical and / or chemical hazards
NIOSH Meets the National Institute for Occupational Health & Safety OHSA Reg. 851, s. 81 Every worker is required to wear safety eyewear to protect from physical and /
or chemical hazards. OHSA Reg. 851, s. 85 Every worker who may fall more than 3 meters at his work must wear a full body harness clipped into a proper anchor. OHSA
Reg. 145 Safety Vests must be of blaze orange color with fluorescent yellow stripes 50mm wide, two on the front and two on the back. The yellow areas must be at least 500cm
squared on the front and 570cm squared on the back. The two stripes on the front must be arranged vertically; those on the back, in an X pattern. Nylon vests must have a side and
front tear-away feature.
E
D F
Earmuffs
SlimLine is the lowest profile earmuff with tapered ear
cups and neckband design
Zephyr offers the lightest weight earmuff ever made with a
3 position headband
ASTM E 84
UL /ORD 1715
Blackhawk 3 high performance, high quality three position
Approved earmuff provides ultimate comfort in a lightweight style
**Tested at a
NVLAP accredited
laboratory
NIOSH
Protective Aprons
C NEOPRENE APRON
35 X 45
A Plastic Disposable Aprons Durable protection against many
White bib style with waist ties acids
35 x 46 or 28 x 46
Tychem QC
Tyvek fabric Quality Coated with polyethylene made exclusively by DuPont
Reliable protection for minor chemical spills where there is potential for mist or light
splash
Bright color provides contrast across a wide range of natural backgrounds for high
visibility in the workplace
Different colors fulfill need for either high or low visibility garments
Lightweight fabric that is durable and resistant to tear and abrasion
Color: Bright Yellow
OHSA Reg. 851 Seams: Serged, Bound or Taped
s. 130 Sizes: S,M,L,XL
Tychem SP
NEW DuPont Tychem? SP garment design offers greater comfort and better
protection
Fills the gap between high-end reusable and limited-use protective apparel
Resists acids, solvents, chemicals and oils
Color: Dark Green
OHSA Reg. 851 Seams: Heat Welded
s. 130
A patented fabric consisting of multiple film barriers with unique layers laminated to
each side of a 3.0 oz/yd2 polypropylene substrate
The leading fabric chosen by hazmat responders worldwide
With more than 230 specific chemicals tested to date, Responder fabric offers the
broadest level of chemical protection on the market today
Color: Dark Blue
Seams: Taped
OHSA Reg. 851
s. 130
Body Filter 95
Calibrated for greater than 99% retention of 0.3 micron particle with an
efficiency similar to an N95 respirator
Will provide keep out dry particulate protection while providing 125
times more breath ability than the leading brand
The breath-ability greatly reduces heat build inside the suit providing
extende comfort for prolonged use
Incorporates the highest quality in electrostatically charged filter media
into a superior filtration system
Exceptional abrasion resistance is provided by a unique aperture molded
hard plastic polymer grid on the surface
OHSA Reg.
851 s. 130
The combination of flame retardant chemistry and wood pulp causes the fabric to
char at temperature below the fabric ignition point.
OHSA Reg.
851 s. 130
A B
Microguard MP Accessories
Utilizes state of the art lamination technology to combine a soft non-woven
fabric with micro porous films
This allows a superior liquid barrier, better particulate barrier,stronger
resistance and lower lint then other fabrics
C
OHSA Reg.
851 s. 130
OHSA Reg.
851 s. 130
Sizes M, L, XL, 2XL, and 3XL available from stock (Other sizes
available by special order)
Made from arc flash resistant, Indura Ultra Soft
Sewn with Nomex threat
Coats are 50 long and have Nomex wristlets.
OHSA Reg. 851 s. 130 Coats have expansion back for added comfort
NFPA Code 70
ASTM F1506
Coats have dual stage front closure with high temperature
plastic zipper on the 31 - 55 cal/cm2* coats
Bib Overalls have integrated heavy duty suspenders
Bib Overalls have a relaxed cut for greater mobility with a 30
inseam and adjustable hook and pile waist straps
Colour: Orange
OHSA Reg. 851, s. 130 Every worker is required to wear personal protection equipment who is exposed to a physical and / or chemical hazards
NFPA Code 70 Requires an employee to wear the appropriate level of protection where there is risk of Arc Flash Hazards.
ASTM F1506 Flame resistance of clothing for use by electrical workers exposed to momentary electric arc and related thermal hazards.
OHSA Reg. 851 s. 130 Kits contain an arc flash jacket, bib overalls, arc
NFPA Code 70 flash protection hood, hard hat, electrical insulating
rubber gloves, leather protector gloves, glove bag
and gear bag.
These kits come with the option of Class 00, Class
0, Class 1 or Class 2 insulating rubber gloves.
Nitrile Gloves
Puncture resistant
Will not swell, weaken or degrade
High performance nitrile compound
Non slip grips OHSA Reg. 851 s. 130
Sold per dozen
Rubber Gloves
Excellent wet grip
Resistance to ketones and mild acids
Excellent elasticity and resistance to cuts & tears
OHSA Reg. 851 s. 130
Sold per dozen
B
A
Tuff-Spun Family
100% chemically blown PVC sponge foam designed to provide good Anti-Fatique benefits
Wear-bonded; has a heavy-duty top surface layer for improved abrasion resistance and wear
Good durability for heavy duty areas where there is no cart traffic, usage for industrial
OHS Reg. Div. XX workstations, laboratories, laundries, processing plants, and packaging areas
s. 166 - 171
Canada Labour
2x3 or 3x4 or 3x5 or 3x10 or 4x6 for Mats
Code, Sec. 125 2x60 or 3x60 or 4x60 for Rolls
Spark Safe
Industrial grade anti-fatigue mat with rubber foam base and a specially formulated
textured rubber surface
This is all rubber and repels sparks and hot metal shards and will perform in the
harshest industrial environments
Thick foam base reduces leg and back fatigue
Textured rubber surface improves traction and Beveled edges minimize tripping
OHS Reg. Div. XX 2x3, 3x5, 3x12 standard mat
s. 166 - 171 2x60 or 75, 3x60 or 75, 4x60 or 75 standard roll
Canada Labour
Code, Sec. 125
Canada Labour Code, Sec. 125 - When the manual moving of loads or people compromises the workers safety, the employer must put mechanical devices at his/her disposal to avoid accidents and potential
environmental damages
OHS Reg. Div. XX s. 166 - 171 - Provide workers with the necessary equipment allowing them to reach the top of piles of material safely, such as step ladders, ladders, or any other equipment designed for such
purpose.
Canada Labour Code, Sec. 125 - Employers must ensure that the height of workbenches and the position of chairs are adaptable to the work and the worker in such manner that workers are ensured to keep a
correct posture and fatigue is reduced.
Canada Labour Code, Sec. 125 - Employers must ensure that machinery, equipment and tools used by their workers meet mandatory health, safety and ergonomic standards.
Walk-N-Clean Mats
60 shoe cleaning tacky sheets treated with a microbial agent,
mounted on a non-toxic heavy duty frame with a nonslip, non-skid
backing.
When top sheet is dirty, simply peel away.
Frame and cleaning pads have a total thickness of 1/4. Refills of 60
sheets
available.
Applications: Hospitals Dental Offices, Paint Area labs & Clean Rooms
Refills are easy to install.
$399.00
e. COSHA Canadian Occupational Safety and Health
Administration
f. OHSA Occupational Health and Safety Act
g. CLC Canada Labor Code
h. NIOSH National Institute for 11-05
Occupational Safety and Health
01-21
i. OHS Occupational Health & Safety
Metro-Super Erecta
Open Wire Shelving System
HACCP
COHSA Reg. 86, s.14.50
4-Shelf unit
54 H NO. PRICE 63 H NO. PRICE 74 H NO. PRICE 86 H NO. PRICE
18 D 36 W, 10-3005-00, $245.96 36 W, 10-3009-00, $252.11
48 W, 10-3006-00, $279.57 48 W, 10-3010-00, $285.72
60 W, 10-3007-00, $317.77 60 W, 10-3011-00, $323.92
72 W, 10-3008-00, $360.55 72 W, 10-3012-00, $366.69
24 D 36 W, 10-3015-00, $278.04 36 W, 10-3019-00, $282.63 36 W, 10-3023-00, $288.78 36 W, 10-3013-00, $307.07
48 W, 10-3016-00, $320.81 48 W, 10-3020-00, $325.41 48 W, 10-3024-00, $331.56 48 W, 10-3014-00, $349.85
60 W, 10-3017-00, $378.87 60 W, 10-3021-00, $383.46 60 W, 10-3025-00, $389.61 60 W, 10-3027-00, $407.91
72 W, 10-3018-00, $424.70 72 W, 10-3022-00, $429.30 72 W, 10-3026-00, $435.44 72 W, 10-3028-00, $453.74
Extra posts
NO. Height PRICE
10-3029-00 54 9/16 $16.04
10-3030-00 62 9/16 $17.19
10-3031-00 74 5/8 $18.72
10-3032-00 86 5/8 $23.30
Extra shelves
NO. 36 W Price NO. 48 W Price NO. 60 W Price NO. 72 W Price
10-3035-00 18 D $44.31 10-3036-00 18 D $52.71 10-3037-00 18 D $62.26 10-3038-00 18 D $72.95
10-3039-00 24 D $53.47 10-3040-00 24 D $64.17 10-3041-00 24 D $78.68 10-3042-00 24 D $90.14
HACCP Stainless Steel Wire Shelving will not rust in dry or moist conditions causing rust particles to land on food during food preparation.
COHSA Reg. 86, s. 14.50 Allow light to pass through without reducing levels required by Part 6. Materials stored and placed so employees are not required to lift
materials, goods or things in a manner that would lead to overextension of or excessive strain on the body.
24 25 26 27
Overall WxD cap.lbs. No. 76H STARTER 76H ADD-ON 88H STARTER 88H ADD-ON
36 X 12 600 10-2201 $235.20 $178.50 $249.90 $185.85
36 X 18 600 10-2202 $290.85 $233.60 $305.10 $240.95
36 X 24 600 10-2203 $319.20 $262.50 $333.90 $269.85
42 X 18 450 10-2204 $331.30 $274.60 $345.95 $281.92
48 X 12 300 10-2205 $266.70 $210.00 $281.40 $217.35
48 X 18 300 10-2206 $365.40 $308.70 $381.15 $316.05
48 X 24 300 10-2207 $403.20 $346.50 $417.90 $353.85
Extra shelves
NO. WxD cap.lbs. Weight PRICE
10-2240-24 36 X 12 600 8 lbs $21.00
10-2241-24 36 X 18 600 11.5 lbs $32.00
10-2242-24 36 X 24 600 14.75 lbs $37.80
10-2243-24 42 X 18 450 13 lbs $40.20
10-2244-24 48 X 12 300 10.5 lbs $27.30
10-2245-24 48 X 18 300 15 lbs $47.00
10-2246-24 48 X 24 300 19 lbs $54.00
Extra posts
NO. Height Weight PRICE
10-2250-24 76 8 lbs $23.10
10-2251-24 88 9 lbs $26.75
10-2252-24 100 10 lbs $30.70
01 02 03
Overall WxD Shelf Cap. Shelf 75H STARTER 87H STARTER 99H STARTER
Lbs. Qty. No. Price Item Price Item Price
36X12 400 5 10-3501 144.98 154.98 159.98
36X12 400 6 10-3502 157.96 167.96 172.96
36X12 400 7 10-3503 170.94 180.94 185.94
36X18 350 5 10-3504 178.72 188.72 193.72
36X18 350 6 10-3505 195.76 205.76 210.76
36X18 350 7 10-3506 213.64 223.64 228.64
36X24 300 5 10-3507 205.88 215.88 220.88
36X24 300 6 10-3508 229.36 239.36 244.36
36X24 300 7 10-3509 252.84 262.84 267.84
42X18 275 5 10-3510 195.88 205.88 210.88
42X18 275 6 10-3511 216.16 226.16 231.16
42X18 275 7 10-3512 236.44 246.44 251.44
48X12 250 5 10-3513 180.98 190.98 195.98
48X12 250 6 10-3514 199.96 209.96 214.96
48X12 250 7 10-3515 218.94 228.94 233.94
48X18 250 5 10-3516 221.88 231.88 236.88
48X18 250 6 10-3517 247.36 257.36 262.36
48X18 250 7 10-3518 272.84 282.84 287.84
48X24 250 5 10-3519 244.48 254.48 259.48
48X24 250 6 10-3520 272.96 282.96 287.96
48X24 250 7 10-3521 301.44 311.44 316.44
Boltless
Ideal for heavier loads
Economical wood decks
Galvanized steel pan decks
available
Standard sizes in stock
Shelf capacity up to 2000 lbs
48 L - 01 48 L - 02 72 L - 03 72 L - 01 96 L - 02 96 L - 03
NO. Shelves 24 Starter 6 H 24 ADD-ON 6 H 24 Starter 7 H 24 ADD-ON 7 H 24 Starter 8 H 24 ADD-ON 8 H
10-2881 3 349.00 249.00 354.00 304.00 369.00 324.00
10-2882 4 389.00 319.00 394.00 324.00 414.00 334.00
10-2883 5 464.00 394.00 469.00 399.00 489.00 409.00
No. 36 Starter 6 H 36 ADD-ON 6 H 36 Starter 7 H 36 ADD-ON 7 H 36 Starter 8 H 36 ADD-ON 8 H
10-2884 3 359.00 254.00 369.00 309.00 379.00 329.00
10-2885 4 399.00 324.00 409.00 329.00 424.00 339.00
10-2886 5 494.00 419.00 504.00 424.00 519.00 434.00
Ultra Rack
Containment Trays
EPA Ch. E19, Part 10 At storing, decanting or transporting hazardous liquids eventual COHSA Reg. 86, s. 14.50 At storage of cylinders prevent obstacles to
Spills and Leaks must be contained or captured to prevent contamination of the reduce lighting to unsafe levels.
environment
OHSA Reg. 851, s. 47 Cylinders must be wedged to prevent movement.
B D
Dixie-Drum Chock
Eliminate the need for expensive specialty racks & stands to store
your drums horizontally. E
store drums on standard pallet racks or on wooden pallets.
The Chock eliminates rolling while drums are stored on their sides. A
C
Models available to tilt drums forward for more drainage from
spigots.
Front stops on tilted models to eliminate slide off.
Molded from recycled polyethylene.
Weight Capacity: 550 Lbs.
EPA Ch. E19, Part 10
Color: Black
Extra Shelves: Super Erecta for stationery & mobile security storage
Dimensions Chrome Price Metroseal Price Stainless Steel Price
36x18 10-3013-38 $50.42 10-3013-39 $61.49 10-3013-00 $167.29
48x18 10-3014-38 $60.73 10-3014-39 $72.95 10-3014-00 $197.47
36x24 10-3015-38 $63.40 10-3015-39 $73.72 10-3015-00 $205.87
48x24 10-3016-38 $74.48 10-3016-39 $89.38 10-3016-00 $247.88
60x24 10-3017-38 $87.47 10-3017-39 $105.03 10-3017-00 $302.12
36x30 10-3018-38 $87.08 10-3018-00 $270.42
48x30 10-3019-38 $100.45 10-3019-00 $315.87
60x30 10-3020-38 $110.76 10-3020-00 $351.01
Canada Labour Code, Sec. 125 - When the manual moving of loads or people compromises the workers safety, the meet mandatory health, safety and ergonomic standards.
employer must put mechanical devices at his/her disposal to avoid accidents and potential environmental damages HACCP- Transporting Food to Remote Sites (Satellite Kitchens) Stainless Steel Wire
OHS Reg. Div. XX - Provide workers with the necessary equipment allowing them to reach the top of piles of material Shelving to prevent rust particles to contaminate food during food preparation.
safely, such as step ladders, ladders, or any other equipment designed for such purpose. EPA Ch. E19, Part 10 Proper equipment should be used when storing, decanting or
Canada Labour Code, Sec. 125 - Employers must ensure that the height of workbenches and the position of chairs transporting hazardous liquids to prevent contamination of the environment
are adaptable to the work and the worker in such manner that workers are ensured to keep a correct posture and OHSA Reg. 851, s. 45 Material Handling and Transporting of dangerous liquids must
fatigue is reduced. prevent injury and / or dangers to the environment
Canada Labour Code, Sec. 125 - Employers must ensure that machinery, equipment and tools used by their workers
Colour Chart ( -23 = Blue, -25 = Grey, -28 = Black, -36 = Berry)
NO. DESCRIPTION Dimensions Price
11-1201 Deep Ledge Series Carts - 2-shelf unit 32 3/4x21 1/2x41 H $234.55
11-1202 Deep Ledge Series Carts - 3-shelf unit 32 3/4x21 1/2x41 H $291.51
11-1203 Deep Ledge Series Carts - 2-shelf unit 38 3/4x27x 41 H $277.00
11-1204 Deep Ledge Series Carts - 3-shelf unit 38 3/4x27x 41 H $339.51
HACCP
3 threadguard casters
Treated plywood undercarriage
HACCP
B
A
Single Cylinder
Cart Loop
Handle
Single Cylinder
Cart Loop
Handle
Double
Double C Cylinder Cart
Cylinder Cart Single Grip
Single Handle Handle D
Cylinder Carts
Double Cylinder Cart Double Cylinder Cart
A Tool tray C 1 x 16 ga. Tubing construction
1 x 14ga. Tubing construction Wieght 21 lbs
Wieght 32 lbs Painted Blue Enamel
Painted Blue Enamel
EPA Ch. E19, Part 10 Proper equipment should be used when storing, decanting or transporting hazardous substances to prevent contamination of the environment
OHSA Reg. 851, s. 45 Material Handling and Transporting of dangerous liquids must prevent injury and / or dangers to the environment
OHSA Reg. 851, s. 47 Material Handling and Storing of dangerous liquids must be wedged to prevent movement
Cylinder Dollies
The Single Cylinder Dolly HD is designed for demanding
industrial facilities or tough outdoor applications in which
transport of a single cylinder is required.
Accommodates one cylinder, up to 12 in diameter, including
class 300 SCF industrial gas cylinders and No. 5 acetylene
cylinders.
Dimensions: 22.5 L x 24.75 W x 46 H, 57 cm x 65 cm x 117 EPA Ch. E19, Part 10
cm OHSA Reg. 851, s. 45
Weight: 31 lbs. / 27.45 kg
Load Bearing Capacity UDL: 250 lbs / 113.4 kg
Note:
Upper and lower cylinder
straps must be installed
and tightened for transport
applications.
Caster Frame
Gives the 6-Pack Cylinder Rack mobility EPA Ch. E19, Part 10
OHSA Reg. 851, s. 45
A B C
E
D
A
Pallet Loader Drum Truck
Double grip handle
Heavy duty tubing construction
Frame 27x 63
Wieght 68lbs
Paint Blue enamel
B C-D E
Self Stander Drum Truck Convertable Hand Trucks Open Drum Mover
Double grip handle Straight backdesign For 45 gallon drums
1 5/16 tubing construction Removable loop handle Easy loading low profile frame
Frame 27x 63 1 1/4 x 14ga tubing T-Bar pull habdle
Weight 70lbs Painted blue enamel One 5 swivel RSX Rubber caster
painted blue enamel High-frame 14x 51 weight 28lbs
Low frame 14x 45 Painted blue enamel
B
Drum Dollies
EPA Ch. E19, Part 10
OHSA Reg. 851, s. 45
Easy transport of 45 gallon drums
All welded constuction
24inside diameter
Painted blue enamel A
Drum Rockers B
Drum Racks
Allows for easy handling and storage of 3 drums
Heavy-duty welded steel construction with durable, powder coat finish
Accessible with forklift from all sides
Racks can be stacked to store additional drums
OHSA Reg. 851,
s. 47
Lowered height 2
Raised height 6
1 year comprehensive warranty
Canada Labour Code, Sec. 125 - When the manual moving of loads or people compromises the workers safety, the employer must put mechanical devices at his/her
disposal to avoid accidents and potential environmental damages
OHS Reg. Div. XX s. 166 - 171 - Provide workers with the necessary equipment allowing them to reach the top of piles of material safely, such as step ladders,
ladders, or any other equipment designed for such purpose.
Canada Labour Code, Sec. 125 -Employers must ensure that the height of workbenches and the position of chairs are adaptable to the work and the worker in such
manner that workers are ensured to keep a correct posture and fatigue is reduced.
Canada Labour Code, Sec. 125 - Employers must ensure that machinery, equipment and tools used by their workers meet mandatory health, safety and ergonomic
standards.
Lift Trucks
Manual Stacker
Economical lift to handle tasks from transporting dies,
moulds, skids, and pallets
Compact enough to operate in congested areas
Precision engineered for smooth performance and
exceptional durability
Lifting function operated by foot & hand controls
Adjustable forks & straddle legs
Semi-Electric Stacker
Compact European design
Robust strength for long life OHS Reg. Div. XX s.
166 - 171
Smooth lifting & lowering control for Canada Labour Code,
precision requirements Sec. 125
12V charger included
Panel Mover
Platform: Robotic welded 16 gauge tubular steel and steel
plate.
Three removable uprights made of 1 x 16 gauge welded
steel tubing. Standard, 26 high
Finish: Platform and uprights coated with non-mar, skid-
resistant vinyl.
1134 between upright sockets. OHS Reg. Div. XX s.
Extra tall 45 H 166 - 171
Canada Labour Code,
Sec. 125
C
Heavy Duty Panel Mover
D
Platform Base: 12-gauge robotic welded
steel base reinforced with 12-gauge steel
ribs for lasting durability.
Platform is coated with anti-skid polyvinyl
to help secure and protect the load.
Push handle or heavy-duty uprights
equipped with two cross-braces for
maximum strength and to keep small OHS Reg. Div. XX s.
parcels in place. 166 - 171
Uprights extend 2614 above base. Canada Labour Code,
1134 floor to top of base; 812 Sec. 125
between upright sockets.
CFIA D98-08 - Polyethylene pallets do not require fumigation or heat treatment like wooden pallets causing uncertainty of the product
successfully crossing the border. Wooden Pallets need to have the country of origin marked on them, they must have a heat treatment certification
on them , an IPPC Stamp or they will be refused entry.
CFIA D98-08
Rackstar Pallets
One piece double deck design and open grid.
Available with 0.5 interrupted lip on top
deck.
Capacity: static-20.000 lbs., dynamic-5000
lbs.
Four-way forklift and pallet truck accessibility
CFIA D98-08
CFIA D98-08
A
Fork Mounted Drum Grab
EPA Ch. E19, Part 10
OHS Reg. Div. XX s. Easily and quickly lifts 55 gal drums without
166 - 171 hydraulic or electric connections
Canada Labour Code,
Sec. 125
Simply slip onto forks and tighten hand screws
Lifts, transport and deposits drums without
leaving the driving position
Firm pressure is automatically applied
B
Drum Stacker
Safely lifts and lowers drums easily
Stacks drums vertically or horizontally for safe,
EPA Ch. E19, Part 10
OHS Reg. Div. XX s.
space saving storage
166 - 171 A simple hand operated hydraulic pump provides
Canada Labour Code, the power to raise and lower steel drums for quick
Sec. 125
storage and retrieval
Rear swivel casters allow for easy maneuvering in
tight space
Maximum lift height is 84
Overall dimensions 61 L x 42 W x 51lowered
height
C
EPA Ch. E19, Part 10
OHS Reg. Div. XX s.
166 - 171 Drum Loader
Canada Labour Code,
Sec. 125 Moves drums to and from pallets easily
Handles provide adequate leverage to lift heavy
drums with minimal effort
Accommodates 23.5 dia x 33.5 to 38 H drums
EPA Ch. E19, Part 10 Proper equipment should be used when storing, decanting or transporting hazardous liquids to prevent contamination of the environment
Canada Labour Code, Sec. 125 - When the manual moving of loads or people compromises the workers safety, the employer must put mechanical devices at his/her
disposal. OHS Reg. Div. XX - Provide workers with the necessary equipment allowing them to reach the top of piles of material safely, such as step ladders, ladders, or
any other equipment designed for such purpose. Canada Labour Code, Sec. 125 - Employers must ensure that the height of workbenches and the position of chairs
are adaptable to the work and the worker in such manner that workers are ensured to keep a correct posture and fatigue is reduced. Canada Labour Code, Sec. 125 -
Employers must ensure that machinery, equipment and tools used by their workers meet mandatory health, safety and ergonomic standards.
$244.00
20-0 160- 00
HACCP - Preventing
Mobile Dunnage Racks
Cross-Contamination Versatile mobile racks eliminate wasted storage area
During Storage and Comes with optional handle which makes pushing easier
Preparation Welded Aluminum
Dunnage Racks
Approved for use in freezers, coolers, displays, and packing &
storage areas
Heavy duty all-welded aluminum racks keep products organized
HACCP - Preventing and off the floor
Cross-Contamination All heli-arc weld contruction for better strength and sanitation
During Storage and All feet capped with durable plastic inserts to prevent floor
Preparation
damage
Tube spacing 4.5 centers
Lifetime guarantee against rust
HACCP - Preventing Cross-Contamination During Storage and Preparation - To reduce foodborne illness by preventing unintentional contamination of food
HACCP - Controlling Time and Temperature During Preparation - To prevent foodborne illness by limiting the amount of time that potentially hazardous foods are held in the temperature danger
zone during preparation
HACCP - Using and Calibrating Thermometers - To prevent foodborne illness by ensuring that the appropriate type of thermometer is used to measure internal product temperatures and that
thermometers used are correctly calibrated for accuracy
HACCP - Holding Hot and Cold Potentially Hazardous Foods - To prevent foodborne illness by ensuring that all potentially hazardous foods are held under the proper temperature
HACCP - Transporting Food to Remote Sites (Satellite Kitchens) - To prevent foodborne illness by ensuring that food temperatures are maintained during transportation and contamination is
prevented
NSF/ANSI Standard 51 - Food Equipment Material - This Standard is applicable to the materials and finishes used in the manufacture of food equipment
NSF/ANSI Standard 2 - Food Equipment - This Standard establishes minimum food protection and sanitation requirements for the materials, design, fabrication,
construction, and performance of food handling and processing equipment.
HACCP - Preventing
Cross-Contamination
During Storage and
Preparation
NSF
B A
C
HACCP - Preventing
Cross-Contamination
During Storage and
Preparation
NSF
Storplus Square Food Wide, easy grip handles with comfortable design and textured finishes which provide a secure grip
Drain holes in handles allow for quicker drying
Storage Containers Date indicators on all four sides help maintain food quality and make inventory control easy
Spoonable bottoms makes it easier to remove contents and helps prevent food waste as well as easier
clean-up
Corner stacking lugs add strength, rigidity and prevent jamming when stacked
Capacity indicators listed in gallons and liters, are color-coded along with their matching lids for;
prepping, portioning, measuring of contents and ingredients, and inventory control
Non-slip textured finish on corners, edges, and bottom of container to reduce scratches to keep
containers looking like new longer
Polycarbonate temperature ranges from -40 to 212 F
Polyethylene temperature ranges from -40 to 180 F
A Polycarbonate Containers
NO. DESCRIPTION PACK PRICE/ea
20-0143-00 2 Qt. Polycarbonate 6 $11.99
20-0144-00 4 Qt. Polycarbonate 6 $17.88
20-0145-00 6 Qt. Polycarbonate 6 $23.00
20-0146-00 8 Qt. Polycarbonate 6 $27.25
20-0147-00 12 Qt. Polycarbonate 6 $35.00
20-0148-00 18 Qt. Polycarbonate 6 $55.00
20-0166-00 22 Qt. Polycarbonate 6 $68.50
B Polyethylene Containers
NO. DESCRIPTION PACK PRICE/ea
20-0130-00 2 Qt. Polyethylene 6 $ 8.20
20-0131-00 4 Qt. Polypropylene 6 $10.90
20-0132-00 6 Qt. Polypropylene 6 $13.75
20-0133-00 8 Qt. Polypropylene 6 $16.25
20-0134-00 12 Qt. Polypropylene 6 $22.88
20-0135-00 18 Qt. Polypropylene 6 $31.00
20-0136-00 22 Qt. Polypropylene 6 $38.25
C Polyethylene Lids
NO. DESCRIPTION PACK PRICE/ea
20-0140-00 2 4 Qt. Polyethylene 6 $4.50
20-0141-00 6 8 Qt. Polyethylene 6 $5.50
20-0142-00 12 18 Qt. Polyethylene 6 $7.80
Crisper Bin
Comes complete with a dolly (twist-on & twist-off
functions allowing for easy mobility even when
full), base container, perforated liner, lid and drain
spigot
Easily transports produce from prep area to walk-
in fridge HACCP - Preventing
Convenient drain faucet eliminates lifting & tipping Cross-Contamination
when draining contents During Storage and
Preparation
Cutting Board
HACCP - Preventing
Sparta Spectrum Color-Coded Products are a key group of CCP
Cross-Contamination
During Storage and Products designed to promote safe food handling and help prevent
Preparation hazardous cross-contamination
NSF/ANSI Standard
51
Body and head are made of polypropylene for maximum chemical compatibility
Uses include; cleaners, waxes, food products, cooking oils, hand soap, shampoo, &
germicidal detergents
Graduated Measuring
Scoops
These are resistant to chipping, scratches and
breakage and are lighter weight than metal
With a beveled front edge for maximum pickup
HACCP - Preventing & hanging slot for efficient storage, and a
Cross-Contamination thumb indent for greater control.
During Storage and
Preparation
Measuring Cups
Graduations embossed in metric and English on opposite
side (will not wash off)
HACCP - Preventing
These measures have a self-draining bottom and an
Cross-Contamination I-Beam handle with thumb grip control
During Storage and Dishwasher and freezer safe from -40 to 212 F
Preparation
Color: Clear
NO. DESCRIPTION ELECTRICAL CASE WEIGHT PRICE
20-0401-00 1 each 12x20 well with drain 120V, 1500W, 12.5 Amps 24 lbs. $ 619.00
20-0402-00 2 each 12x20 well with drain 208/240V, 2400/3200W, 11.5/13.3 Amps 89 lbs. $ 1552.00
20-0403-00 4 each 12x20 well with drain 208/240V, 4800/6400W, 23.1/26.7 Amps 169 lbs. $ 2852.00
Color: White
NO. DESCRIPTION ELECTRICAL CASE WEIGHT PRICE
20-0404-00 2 each 12x20 well with drain 208/240V, 2400/3200W, 11.5/13.3 Amps 89 lbs. $ 1552.00
20-0405-00 3 each 12x20 well with drain 208/240V, 3600/4800W, 17.3/20.0 Amps 89 lbs. $ 2316.00
20-0406-00 4 each 12x20 well with drain 208/240V, 4800/6400W, 23.1/26.7 Amps 89 lbs. $ 2852.00
Color: White
NO. DESCRIPTION ELECTRICAL CASE WEIGHT PRICE
20-0407-00 Top Mount with Drain 120V, 750W, 6.3 Amps 23 lbs. $ 612.00
Cateraide
End Loader-insulated to maintain correct serving temperatures, individual track for each
food pan, holds 8 combinations of 6, 4 & 2.5 deep food pans,
Heat resistant to 200 F; comes in Black , Brick Red, Brown, Forest Green, Slate (59), Tan
Slide N Seal Top Loader-they have doors & lids that glide shut and stay closed without
latches or gaskets.
Molded in tethered lock pin to seal carrier for safety, self-venting lids and doors keep
foods fresher, crisper and more appetizing. HACCP Holding Hot
Touch & scratch resistant polyethylene construction. comes in Black , Brown , Forest and Cold Potentially
Green Hazardous Foods
Cateraide Accessories
Slide N Seal Beverage Dispensers
Hold temperatures hours longer than traditional beverage servers HACCP - Holding Hot
Unique lid seal provides leak-proof transport and Cold Potentially
Comes in Black , Brown , Forest Green Hazardous Foods
CaterCooler
This is perfect for maintaining cold foods for off-site
feeding and outdoor events
Freeze the CaterCooler overnight or for 8 hours and
it will keep foods cold for up to 8 hours without ice
keeping it at the guideline of 40 F for the entire length
of its cold retention period
HACCP - Holding Hot Durable polyethylene shell
and Cold Potentially
Hazardous Foods
Coldmaster Crocks
Carlisle has mastered the art of keeping chilled foods cold, safe, and fresh, Coldmaster is
the industry standard for cold holding without ice or electricity
Crock holds 2 quarts of salad, dressing, condiments, NSF listed HACCP - Controlling
Maintains 40 F or lower for 8 hours (up to 12 hours with a lid) Time and Temperature
Can use a pump as well for sauces or condiments oz or 1 oz portions During Preparation
Comes in White, Black, Brown , Gray , Lids are Clear or Translucent
Coldmaster Coldpans
Designed with the same capacity as traditional style food pans which will hold
durapan food pans
Maintains 40F for up to 8 hours when food is place directly into the pan HACCP - Controlling
Use to keep durapans cold, eliminating the need for unsanitary ice baths Time and Temperature
Dishwasher safe During Preparation
Comes in White (02), Black (03)
Food Boxes
Durable and stain-resistant clear polycarbonate allows for easy
identification of contents
White polyethylene provides more economical storage and safer
transport
Freezer safe for use through the flow of the kitchen
Date control panels on boxes & lids for managing food safety
HACCP - Controlling Industry standard sizes fit most existing storage racks and counters
Time and Temperature NSF certified and commercial dishwasher safe
During Preparation
HACCP - Controlling
Time and Temperature
During Preparation
NSF/ANSI Standard 51
Dial Pocket Thermometers
Dishwasher safe dial pocket thermometer
Built in sheath calibration tool
Shatter resistant lens
Stainless steel construction
Digital Thermometers
A
Thermocouples
A Microtip
Superfast 3 second temperature response
Open to turn on, close to turn off, easy to use no buttons
Microtop thermocouple folding probe perfect for thin sliced deli meats and
delicate foods
B Temperature moniture
B Min.max/hold modes
Probe included with built-in storage and protection
Dual read Fahrenheit & Celsius
IP54 rating for dust and moisture
HACCP - Controlling Time Auto off, low Battery
and Temperature During 9V battery and custom travel pouch included
Preparation
HACCP - Using and
Calibrating Thermometers
Infared Thermometer
Ergonomic, palm sized design with trigger button on the side
Min/max modes
HACCP - Controlling Time
Dual read Fahrenheit & Celsius
and Temperature During
Preparation
HACCP - Using and
Calibrating Thermometers
B
Dual read Fahrenheit & Celsius
Large 3/8 LCD display
Hold button
TempTester I - 10
TempTester II - 10, 11
Mechanical Timer
Easy to operate
No batteries required
Loud alarm bell
HACCP
$589.00
21-0118-
00
Grey 25, Blue 23, Black 28, Berry 36, Metro Seal - 39
EPA Ch. E19, Part 10 Proper equipment should be used when storing, decanting or transporting hazardous liquids to prevent contamination of the environment
NIOSH Meets the National Institute for Occupational Health & Safety FM 6921 Approved A waste container by design which will suffocate an internal fire
Canada Labour Code, Sec. 125 - When the manual moving of loads or people compromises the workers safety, the employer must put mechanical devices at his/her disposal
to avoid accidents and potential environmental damages
Canada Labour Code, Sec. 125 - Employers must ensure that machinery, equipment and tools used by their workers meet mandatory health, safety and ergonomic standards
FM 6921 Approved-waste container by design wich will suffocate internal fire
PRICE CHART
KEY NO. Description Dimensions Handles & Shelf Materia Price
A
B 21-0146-00 Chemical Transport Cart 21 x 30 Stainless Steel, Polyethylene $ 938.50
B
Lab Carts
Ergonomically designed for low effort transport
Precise handling you need to maneuver in close quarters
Sturdy aluminum corner castings firmly secure solid shelves to
post
Stainless Steel shelves
EPA Ch. E19, Part 10
Casters
NO. Wheel Material Load Rating Corrosion Resistance Caster Type Price/ea
10-3101-00 Polyurethane 250 lbs Low Rigid $ 35.25
10-3102-00 Polyurethane 250 lbs Low Swivel $ 35.25
10-3103-00 Polyurethane 250 lbs Low Brake $ 39.75
10-3104-00 High Modulus Rubber 300 lbs High Rigid $ 69.00
10-3105-00 High Modulus Rubber 300 lbs High Swivel / Brake $ 73.00
10-3106-00 Polymer 300 lbs High Swivel $ 80.00
10-3107-00 Polymer 300 lbs High Brake $ 80.00
Waterproof pH Tester
BD Disposable Syringe
Use these disposable, sterile, polypropylene syringes for
general-purpose applications
Syringes come in an easy-to-open sealed package and can
be autoclaved out of the package
Needles are not included
Canada Labour Code, Sec.
125
Scienceware Dippers
Quantity 1 per pack; polypropylene cup that screws onto
the handle
Two pouring spouts on the cup allow you to pour from
either side
Long handles make these dippers ideal for sampling from
large tanks, vats, streams, and lakes
High-density polyethylene handles are ribbed for a sure
grip; end has hook for hanging
$79.99
b. EPA Environmental Protection Act
c. OHSA Occupational Health and Safety Act
d. ULC Underwriters Laboratories Canada Inc.
e. NFPA National Fire Protection Association
f. FM Factory Mutual
g. CLC Canada Labor Code
h. OHS Occupational Health & Safety
i. FPPA Fire Protection and Prevention Act
Steel Lockers-Assembled
12W x 18D x 72H Frames
24 ga. Polyester enamel pre painted steel
Frames are resistance welded on all four corners
to form a rigid structure
Doors are welded double pan construction
Lockers maintain strength through the use of pop
rivet assembly
Single Tier Lockers include 1 hat shelf and 3 coat
hooks
Double&Triple tier lockers include 2 coat hooks
per compartment
Other sizes available
HACCP - Controlling
Time and Temperature
During Preparation
OHSA Reg. 851, s. 134 To prevent contamination with hazardous substances found in the workplace employers must provide individual lockers / cabinets and benches to employees for
changing clothes.
A. B.
Industrial Seating
KEY NO. DESCRIPTION DIMENSION Lbs COLOUR PRICE
A 14-0601-23, 28 High Back Multi-Tilter 25.5 w x 24.5 Dia x43h 55 Blue, Black $ 659.95
B 14-0602-28 Low Back Task Chair Stool 20 w x 24 x 48h 37 Black $ 507.00
C 14-0603-28 Low Back Task Chair Stool 18w x 20.5d x 42 h 33 Black $ 440.00
D 14-0604-38 Work Stool Pneumatic-Chromed 14w x14d x 26.5h 16 Blue, Black $ 195.00
E 14-0605-38 Heavy Duty Bench Stool 16w x16d x 27.5h 17 Black $ 169.00
Canada Labour Code, Sec. 125 - When the manual moving of loads or people compromises the workers safety, the employer must put mechanical devices at his/her disposal to avoid accidents
and potential environmental damages OHS Reg. Div. XX s. 166 - 171 - Provide workers with the necessary equipment allowing them to reach the top of piles of material safely, such as step
ladders, ladders, or any other equipment designed for such purpose. Canada Labour Code, Sec. 125 - Employers must ensure that the height of workbenches and the position of chairs are
adaptable to the work and the worker in such manner that workers are ensured to keep a correct posture and fatigue is reduced.
Canada Labour Code, Sec. 125 - Employers must ensure that machinery, equipment and tools used by their workers meet mandatory health, safety and ergonomic standards.
A C
D C
ALUMINUM CYLINDER - CARBON DIOXIDE B
Fire Protection for computer rooms & mechanical equipment
Squeeze grip operation
Glossy red paint finish A
Chrome plated valve is precision machined from forged brass
complete with stainless steel top and bottom handles
The finest CO2 valve manufactured in the world today
Easily operated and recharged
Strong impact resistant horn OHSA Reg. 851, s. 123
Aluminum cylindercomplete with wall bracket NFPA Code 10
Individually packaged OFC Reg. 213
ULC-S504 Listed
NFCC Part 6
OHSA Reg. 851, s. 123 & OFC Reg. 213 Every workplace must be equipped with Portable Fire Extinguishers equipment designed for such purpose.
in such a way that you can reach one within 75 feet from any point OHSA Reg. 851, s. 20 Where vehicle and / or pedestrian traffic are endangered
NFPA Code 10 Fire Extinguishers must be located in plain sight where they are readily accessible and Safety Mirrors need to be placed
immediately available in the event of fire OHSA Reg. 851, s. 52 When working at heights of more than 3 meters above
ULC-S504 Listed Portable Fire Extinguishers meet the NFPA and NFC requirements for easy operation ground a work safety platform, equipped with guard rails and a place to tie off,
NFCC Part 6 Portable Fire Extinguishers must be suitable for fire-classes A, B, C, and their combinations must be used to be lifted by a lift truck.
OHS Reg. Div. XX s. 166 - 171 Provide workers working on piles with the necessary equipment allowing
them to reach the top of piles of material safely, such as step ladders, ladders, pinch grips or any other
Security Mirrors
A INTERIOR CONVEX
Greater than 100 Degree angle of view
Ball & swivel plate attached directly to mirror for lightness and
economy.
Complete with telescoping arm and mounting bracket.
B EXTERIOR CONVEX
Greater than 100 Degree angle of view
Ball & Swivel bolted to weatherproof back.
Mirror has weatherproof metal frame.
Complete with telescoping arm and mounting bracket.
High Wind Option available (airports, etc.)
42 High Handrail
19 deep platform
1x16 ga. Round tubing construction
8x2 polyoelin rear wheels
5x1/4 RSX rubber swivel casters on 4 to 16 step
Engineered Certified
Positive floor locking trip step mechanism OHS Reg. Div. XX s. 166
24Wx9D non-slip perforated step material - 171
300 lb. capacity ANSI 14.7
Painted blue enamel
A.
Low Stand & High Stand Pivot Fan
18 aluminum propeller
Four positions easy reach switch with 10 three
conductor cord and plug
Adjusts 360 degrees
Nickel chrome guards
115V, 1 Phase, 3 speed Open Drip Proof, Ball
Bearing Motor
OHSA Reg. 851,
s. 127
B.
Pedestal Fan
Adjustable pedestal (43-63)
26 base diameter
Wall & ceiling mounts with safety cable included
115V, HP Non-Oscillating, 1 Phase, 3 Speed,
Totally enclosed air over ball bearing motor
C.
4-in-1 Fan
Ceiling hanging, wall, portable
Versatile, one fan, four mounting options
Easy to assemble
Guards, barrel, mountings epoxy coated
HP, 3 Speed (30), HP, 2 Speed (36)
115V, 1 Phase, Ball Bearing, Totally Enclosed
motors
Safety Cable Kit included
OHSA Reg. 851,
s. 127
OHSA Reg. 851, s. 127 To ensure a healthy air at the work place mechanical ventilation must be put in place to ensure the safety of the worker.
115 V
NO. DIAMETER RPM DIMENSIONS PRICE
17-0205-00 30 574 36.5 x 36.5 x 19 $1849.00
17-0206-00 36 415 42.5 x 42.5 x 19 $2099.00
17-0207-00 42 413 48.5 x 48.5 x 19 $3399.00
17-0208-00 48 372 54.5 x 54.5 x 19 $3649.00
230/460 V
NO. DIAMETER RPM DIMENSIONS PRICE
17-0209-00 30 574 36.5 x 36.5 x 25 $2349.00
17-0210-00 36 415 42.5 x 42.5 x 25 $2749.00
17-0211-00 42 413 48.5 x 48.5 x 25 $3449.00
17-0212-00 48 372 54.5 x 54.5 x 25 $3899.00
OHS Regs, s. 4.46 4.53 - Eliminate or minimize the risk of MSIs to workers with anti contents and direction of flow doubtful
fatigue matting OHSA s. 25 (1) (e) A floor, roof, wall, pillar, support or other part
OHSA Reg. 851, s. 25 Any equipment creating a hazard by moving parts or pinch points of a workplace is capable of supporting all loads to which it may
must be guarded be subjected without causing the materials to stress beyond the
OHSA Reg. 851, s. 26 Every machine must be guarded so that product, material allowable stress points
processed, or waste will not endanger the safety of any worker and the environment
OHSA Reg. 851, s. 62 Pipes containing a toxic substance shall have the contents and
direction of flow labeled at the valve, where a pipe passes through a wall, floor or where
Column Protection
Affordable protection for warehouse and factory
columns & beams.
100% high density polyethylene protectors fit 6,
8, 10 & 12 round or square supports
A
Bumper Post Sleeves
Makes old bollard posts look like new
High-visibility yellow HDPE construction with UV inhibitors
Resist fading, rusting or cracking OHSA Reg. 851, s. 25
Eliminates annual maintenance while helping to protect vehicles OHSA Reg. 851, s. 26
and the post from impact damage
Sleeves are 56 long and can be trimmed for an exact fit -
available to fit 4, 6 and 8 N.P.T. pipe sizes
B
Poly Guide-Post Delineators
High-visibility colours: orange, lime green and yellow, mounted on
a 10 sq HDPE plate with anchor slots
Two 3 wide engineering grade reflective silver bands for
increased visibility at night and are MUTCD compliant OHSA Reg. 851, s. 25
Lightweight, portable, yieldable plastic posts used to warn, guide OHSA Reg. 851, s. 26
and delineate
Tough, weather resistant high density polyethylene w/UV
inhibitors, 42 high
C
PROTECTIVE PARKING STOPS
Stop cars in their tracks
Designed for safety and durability OHSA s. 25 (1) (e)
Flexible enough to fit parking lot contours
Four colours for multiple application
4 height differential capability
1,000 lb. load capacity
D
Eagle Speed Bump/Cable Guards
Adds safety to your facility
The bumps caution drivers to danger zones and slow them down
High visibility yellow bumps are specially engineered with the OHSA s. 25 (1) (e)
perfect angle
Non-skid surface and are weather and chemical resistant
-21= yellow,-22 = red, -23= blue, -24 = green, -27 = white, -28 = black, -30 =brown, -31 = orange, -32 = lime
KEY NO. DESCRIPTION DIMENSION Wt (lbs) COLOUR PRICE
A 15-2001 4 Bumper Post Sleeves 56 H 4 Yellow, Red, Green, White, Black, Brown, Orange, Lime $56.36
A 15-2002 6 Bumper Post Sleeves 56 H 6 Yellow, Red, Green, White, Black, Brown, Orange, Lime $61.82
A 15-2003 8 Bumper Post Sleeves 57 H 8 Yellow, Red, Green, White, Black, Brown, Orange, Lime $72.73
A 15-2004 6 Bumper Post Sleeves 72 H 8 Yellow $72.73
A 15-2005 8 Bumper Post Sleeves 72 H 10 Yellow $87.27
B 15-2006 Post Delineators 5.75 W X 42 H 6 Yellow, Lime, Orange $65.45
C 15-2007 Protective Parking Stops 72 L X 8 W X 4 H 15 Yellow, Blue, Grey, Black $78.18
D 15-2008 6 Speed Bump-Cable Guard 72 L X 10 W X 2 H 15 Yellow $124.55
D 15-2009 9 Speed Bump-Cable Guard 108 L X 10 W X 2 H 25 Yellow $165.45
Traffic Cones
PVC construction is durable & flexible
Weighted base keeps cone from tipping
High visibility orange fluorescent colour features UV inhibitors to
prevent fading
OHSA Reg. 851, s. 25 Reflective cones have permanently attached reflective collars for
OHSA Reg. 851, s. 26 added visibility in low light areas or at night
Mobile Barrier
For indoor use. Flexible -- can be set straight, curved or in a circle.
13 ft. long with 16 articulating panels, has two 5 non-marking wheels, and four locking OHSA Reg. 851, s. 25
straps to secure barrier in closed position. OHSA Reg. 851, s. 26
In addition to being lightweight at 32 pounds, this barrier has a compact footprint of 2 x 13.
ANSI approved color and graphics.
Shipped assembled.
Colour: Yellow
Wiper Mat
Attractive and water absorbing mat
Colors: Walnut, Burgundy, Red, Grey, Charcoal,
Evergreen, Blue, Navy, Brown
Thickness: 5/16
Available in following sizes 2x3, 3x4,3x5,
3x6, 3x10, 4x6, 4x8, 4x10
Rolls available in 3x60, 4x60,6x60
OHS Regs.
4.46 4.53
Scrapper Mat
OHS Regs. 100% moulded rubber mat with over 2400 rubber
4.46 4.53 fingers per square foot
Colors: Black
Thickness: 5/8
Available in following sizes
Hazard Warning-A
The most popular conformable PVC Hazard Warning Tapes
These tapes will work quickly to bring attention to any workplace hazard
Made from a 6-MIL conformable vinyl film will adhere to most any clean, dry surface
Tape has a smooth semi-matte surface, great product for use on floors, walls, pipes
and equipment
Floor Paint
Multi-purpose, low VOC water-based acrylic enamel that allows for convenient
Direct-To-Metal (DTM) coating with minimal odor.
OHSA Reg. 851,
Efficient Direct-To-Metal coating no primer required
s. 62
Withstands mild chemical fumes and spills
Resists chalking and fading
USDA acceptable* and Agriculture Canada** approved
Many available colors CALL FOR COLORS
A B C D
E
EPA Reg. 102, s. 3
Untouchable Containers
Available in round, half round and square shapes to fit
every application
Durable & crack resistant in tough indoor/outdoor
EPA Reg. 102, s. 3
conditions
Perfect for hotels, offices, restrooms, shopping malls, and
restaurants
FPPA Reg. 213, s. 2.4.1.4. - Waste receptacles should be constructed of non combustible material and have self closing lids
EPA Reg. 102, s. 3 Proper equipment should be used when reducing, reusing or recycling waste.
FM 6921 Approved A waste container by design which will suffocate an internal fire
Step-On Containers
For hands-free sanitary waste management
Assists in complying with OSHA regulation; 29 CFR 1910.1030 Occupational Exposure
to Bloodborne Pathogens.
Tight-fitting, overlapping lid to help contain odors.
Quiet, heavy-duty pedal for hands-free sanitary use.
Tough, puncture-resistant, all-plastic construction.
Optional rigid liners for containers provide a leak-proof base to help contain liquids
EPA Reg. 102, s. 3
A B C
Deskside WasteBaskets
Space-efficient and economical designed for
convenient desk side waste management
All-plastic construction wont chip, rust or dent.
Rolled rims add strength, and are easy to clean
EPA Reg. 102, s. 3
D
CONFIDENTIAL WASTE CONTAINERS
Slim Jim Confidential Document Container with Lid
Standard Keyed lock provides increased security
Ideal for placement under desks and counters
and work stations
Side entry slot provides easy access EPA Reg. 102, s. 3
Recycling Containers
TRUE Recycling Containers EPA Reg. 102, s. 3
For recycling cans, bottles, paper, etc. Half Moon Bullseyes are also available with
2 containers mounted back to back and attached permanently to a dollie with or
without lids
EPA Reg. 102, s. 3
Lids
Colour Chart: 23 = Blue, 24 = Green,
NO. DESCRIPTION OPENING LABEL PRICE
16-1410 BUSCH Smart-Open 1.5 x 13 Paper Slot Paper Only $12.98
16-1412 BUSCH Smart-Open 1.5 x 13 x 5 Mixed Opening Mixed Recyclables $12.98
16-1414 BUSCH Smart-Open 5 dia Hole Cans & Bottles $12.98
16-1416 BUSCH Smart-Open 9 x 6 Large Rect. Waste Only $12.98
Containers
Colour Chart: 23 = Blue, 24 = Green, 25 = Grey, 31 = Orange
NO DESCRIPTION COLOUR CAPACITY IMPRINT PRICE
16-1301-23 BUSCH-WAST WATCHER BODY Blue 23 Gallons Mobious Loop $59.09
16-1301-24 BUSCH-WAST WATCHER BODY Dark Green 23 Gallons Mobious Loop $59.09
16-1302-25 BUSCH-WAST WATCHER BODY Grey 23 Gallons Blank $59.09
16-1302-28 BUSCH-WAST WATCHER BODY Black 23 Gallons Blank $59.09
Lids
Colour Chart: 23 = Blue, 24 = Green, 25 = Grey, 31 = Orange
NO. DESCRIPTIONS PRICE
16-1304 Circle $41.36
16-1305 Diamond $41.36
16-1306 Mixed Recyclables $41.36
16-1307 Paper Slot $41.36
C A
Outdoor
Improvement
Concrete
Durable and safe
Outdoor
Improvement
Concrete
Glutton Receptacles
Built to withstand extreme weather and handling
Hold down base can be filled with sand or water to provide added
stability and security.
Perfect for large crowds and high-traffic areas
Hooded top available with and without doors
56 gallon capacity
Colour Chart: -22 = red, -25 = grey, -27 = off white, -28 = black, -30 = brown
NO. DESCRIPTIONS DIMENSIONS PRICE
16-1510-27, 30 Large Capacity Container 25 1/2 x 22 3/4 x 31 1/8 H $ 239.00
16-1511-22, 30 Hooded Top without doors 26 5/8 x 23 x 13 H $ 235.00
16-1512-22, 30 Hooded Top with doors 26 5/8 x 23 x 13 H $ 299.00
16-1513-28 Hold Down Base 21 1/2 x 18 x 5 $ 119.50
16-1514-25 Rigid Liner 23 1/4 x 20 1/4 x 29 $ 149.00
Outdoor Receptacles
Steel mesh detailing and wide vertical rails for a sophisticated, high-capacity
waste management solution.
Adjustable leg levelers provide stability on uneven surfaces.
Durable Uni-Koat powder coated finish.
Piano hinged top provides easy access for maintenance.
Retainer bands hold poly-bag securely inside leakproof rigid plastic liner.
Strong vertical rails constructed of heavy gauge, hot dipped galvanized, fire-safe
steel C channels. FPPA Reg. 213 s.
No assembly required 2.4.1.4.
EPA Reg. 102, s. 3
Classics Containers
Perforated steel designs with a clean, modern appearance.
Ideal for stadiums, municipalities, hotels and schools
Wide centre can be custom laser cut to display your logo
Adjustable leg levelers compensate for uneven surfaces.
No assembly required
Cable secured top lifts off for maintenance.
Leak proof rigid plastic liner included
Fire safe, heavy gauge, hot dipped galvanized powder coated or
FPPA Reg. 213 s. stainless steel
2.4.1.4.
EPA Reg. 102, s. 3
Colour Chart: -00 = Stainless Steel, -28 = Black, -33 = Charcoal, -41 = Silver Metallic, -42 = Hammertone Bronze
NO. DESCRIPTIONS DIMENSIONS GAL COLOUR PRICE
16-2901-28, 42, 33, 41 Drop Top w/ Levelers 18 dia x 35.5 h 25 Black,Hammertone Charcoal,Bronze,Silver Metallic $537.61
16-2902-28, 00 Drop Top w/ Levelers 18 dia x 35.5 h 25 Black, Stainless Steel $ 1002.76
16-2903-28, 41 Drop Top w/Levelers 24.5 dia x 35.5 h 25 Black, Silver Metallic $877.51
16-2904-28 Drop Top w/Levelers & Weather Shield 24.5 dia x 47 h 51 Black $919.41
16-2905-28, 00 Drop Top w/Levelers 24.5 dia x 35.5 h 51 Black, Stainless Steel $ 1147.56
16-2906-28 Drop Top w/Levelers & Weather Shield 24.5 dia x 47 h 51 Black $ 1268.62
Street Baskets
Designed to withstand constant use and harsh weather
conditions.
FPPA Reg. 213 s. See-through design is ideal for city streets, parks, beaches, and
2.4.1.4. other high traffic areas.
EPA Reg. 102, s. 3 Hot dipped galvanized or powder-coated steel
FM 6921 Approved Tapered design permits nesting for easy storage
Reinforced curled edges & bottom drain holes
Canada Labour Code, Sec. 125 - When the manual moving of loads or people compromises the workers safety, the employer must put mechanical devices at his/her
disposal to avoid accidents and potential environmental damages
Canada Labour Code, Sec. 125 - Employers must ensure that the height of workbenches and the position of chairs are adaptable to the work and the worker in such
manner that workers are ensured to keep a correct posture and fatigue is reduced.
Canada Labour Code, Sec. 125 - Employers must ensure that machinery, equipment and tools used by their workers meet mandatory health, safety and ergonomic
standards.
Tilt Trucks
Heavy-duty rotationally molded .250 polyethylene body and
handle
Large recessed wheels and swivel casters
Nests for convenient storage
Materials have been approved to meet FDA standards
Canada Labour Code,
Sec. 125
Indoor/Outdoor Starcart
Multipurpose indoor/outdoor use in all weather and climates
Wheels roll effortlessly through gravel, grass and other uneven
surfaces
Molded body and undercarriage for maximum corrosion
resistance
20 semi pneumatic wheels with ball bearings for moving tough
Canada Labour Code,
loads
Sec. 125 Easy to clean
Canada Labour
Code, Sec. 125
65 AND 95 GALLON
Efficient, large capacity waste collection.
Ships fully assembled.
Steel catch bar is compatible with semi-automated systems.
Stable in high winds and on uneven surfaces.
Inset wheel position helps prevent damage to walls and doorways.
Molded in foot tilter helps maneuver heavy loads.
One piece body construction provides superior strength and durability
Canada Labour
Code, Sec. 125
Smokers Pole
Simple, space saving solution for controlling smokers waste.
Easy-to-empty design requires no tools and minimal bending
Weather-resistant powder-coated fire-safe aluminum
Recessed extinguishing screen
Smoke Free
Ontario Act
Reg. 48
A Groundskeeper Receptacles/Tuscan
Groundskeeper Receptacles are hygienic with an easy-to-service steel canister
B Restricted opening shields waste from view, weather and flow of oxygen
Galvanized steel inner canister holds large quantities of cigarette waste
Steel base plate adds stability and discourages theft
Optional weight ring available for added stability
Smoke Free Tuscan style combines clean good looks with easy maintenance
Ontario Act Stainless steel snuff plate
Reg. 48 Anchor holes for added security
Smoke Free Ontario Act Reg. 48 - No smoking permitted in any enclosed workplace. Whether the public has access or not, the area is a workplace
and smoking is not permitted.
EPA Ch. E19, Part 10 Proper storage equipment should be readily available and made accessible in the case of a spill in order to prevent contamination of the environment.
EPA Reg. 102, s. 3 Proper equipment should be used when reducing, reusing or recycling waste.
Sale!
BULLSEYE TRIO
Waste and Recycling combined in one
convenient station.
Heavy-duty roto moulded in sandstone and
premium colours.
Three removable plastic liners included.
$694.95
Hardware and hinges made of stainless
ea. steeluse indoor or outdoor.
161507 Overall dimension: 54 W x 19.5 D x 38 H
25 gal. liners are 17 x 17 x 27 H
$46.29 160104
ea.
traditional containers.
Sale!
Vented Brute 44 gal. Utility Container
Specify colour: 21 (yellow) 22 (red) 25 (grey) 27 (white) 28 (black)