Beruflich Dokumente
Kultur Dokumente
Hello guys, I am back again, I've been playing with Redstone build on my
Lumia 925 for the past 3 days and I'm surprised that the build is stable
enough to use as a daily driver on the old lumia phones.
So for those users who're itching to get Redstone on their unsupported
devices, here is the laymens guide. The whole process is similar to the guide
I made for Installing GDR2. Only the part where we edit the registry details
will defer.
So without any further ado, let us start.
A short advice - Please be patient and calm as your phone will be
standing at death's door during the entire process. So it entirely
depends on you whether you managed to get through this
successfully or not :)
Anyway, I will be guiding you through out the entire process in laymen terms
so that you might not get astray. For this guide I am using the Windows
Phone Internals Tool v1.2 developed by HeathcliffXDA.
I advice you to see the below video to get familiar with the process. (Not
mandatory)
Warning
1) Changes made to your phone are not permanent and can be restored
using Lumia Software Recovery Tool or Windows Phone Recovery
Tool or Windows Phone Internal v1.2.
2) Doing this procedure sometimes might accidentally brick your phone, so
feel free to ask me questions before proceeding.
3) Exceptional Cases - These are the errors you might possibly face if
something goes wrong during the process.
a) Your phone doesn't boot and stays blank (QHSUSB_DLOAD error - to
confirm see it in the device manager of your PC)
Use Windows Recovery Tool and select "Device Not Detected" and it
will bring your phone back to normal. If the WDR Tool doesn't help then go
to this link and use the procedure described in it.
b) Your phone says "Unable to find a bootable option. Press any key
to shut down" - For this use the same Windows Recovery Tool.
Software Requirements
Windows Phone 8/8.1
1) Any Nokia Lumia X2X Series (with and without SD card) running the
below OS versions
8.10.14219.341
8.10.14226.359
Windows 10 Mobile
1) Any Nokia Lumia X2X Series (with and without SD card) running the below OS
versions
10586.107
10586.545
Users who're on these versions can get Redstone in a much simpler way. You can stop
here.
2) Files needed
a) InteropTools v 1.8 - Here
b) DHTUpgrade Advisor - Here
3) Go to developer options and enable developer mode. After that,
Important : Leave the Windows Phone Internals tool open during the
entire process (or at least during the flashing).
3) Now, go to "Unlock boot loader" and select the required files for
unlocking as shown in the below image. This is where the above
downloaded files will come into play.
4) Now click continue and wait for the tool to finish the unlocking process. After it is
done, your phone will boot normally to your lockscreen.
To ensure whether the boot loader is successfully unlocked or not, check
whether the status of Qfuse, Effective bootloader security, Secure boot
platform, Effective boot status turned to green like as shown in the below
image. Only after ensuring, go for next step.
Note : You will get the info only during the Flash Mode, so before checking the
status put your phone to "Flash Mode"
5) Now you
need
to enable root access in your phone, which is essential for changing the
registry keys.
Now click "Enable Root Access" in the
WPI tool and click "unlock phone".
Second way
1) Connect your device and open Windows Phone Internals and boot into Mass
Storage Mode.
2) Once you'r in mass storage mode, open regedit in your pc. Select
HKEY_LOCAL_MACHINE and goto File >> load hive
a) In the dialog box navigate to MainOS >> Windows/system32/config and
select SYSTEM. It will ask you for a name, enter any name (ex: My phone) and
save it.
b) Now Navigate to Platform >> DeviceTargetingInfo and then change the keys
as shown in the next step.
3) Edit Registry:
PhoneManufacturerModelName >> RM-984_1006 >> Write
PhoneModelName >> Lumia 830 >> Write
PhoneHardwareVariant. >> RM-984 >> Write
PhoneManufacturer >> NOKIA >> Write
4) After editing, click unload hive. And then, Exit Mass Storage mode by pressing
Power button and Volume down for 10 sec and your phone will boot to lockscreen.
Process: Part 3
3) At this point your phone is completely Interop unlocked and has Mass Storage mode
enabled. So, let me clarify two things.
a) For Advanced Users - If you wish to retain Mass Storage mode (useful for
changing registry keys using regedit.exe) and root unlock, you can skip this step
and move directly to step 5.
Note that OS updates can't lock the bootloader of your phone. So it stays
unlocked until you flash the using Windows Recovery Tool or till the device
recieves OTA firmware update, which won't happen to old devices at all. In
short, make sure all the firmware updates available for your phone are installed
prior to installing Redstone.
b) For Basic Users - This is a risk-free way. Do the following steps
4) Head's up - Don't check for updates without doing the 3rd step as it is the crucial step
in the whole process.
5) Now go to store and install Windows Insider app and select any preferred ring. I have
selected Release Preview.
This step is the most important one.... "Do not check for updates" without
selecting any ring in Windows Insider. If you do so, you will be downloading the
firmware as well as windows 10 update of whatever be the model you choose to
spoof (830 in my case). So, we're using Windows Insider to bypass firmware
updates and only grab Windows update. (Haven't tested this. Just saying. Feel
free to check this if it is offering firmware update or not.)
Now go to Settings >> phone update >> check for updates >> Install Updates >>
Done
6) Now you have Windows 10 Mobile build 10586.107 installed on your phone. After
that go to Windows Insider and select leave the programme.
Now once again go to Settings >> phone update >> check for updates >> Install
Updates >> Done
7) After the Redstone update is installed you may chose to reset and start
fresh. Resetting is not mandatory. But I advice you to reset as your
device details (registry edits) will get restored to default ones.