Beruflich Dokumente
Kultur Dokumente
ON
MATRIMONIAL-MANAGEMENT
Project Submitted in partial fulfilment of
the requirement of the award of the degree
of
(2006-2009)
SUBMITTED BY
UNDER GUIDANCE OF
Miss Dipika
Acme Embedded Technologies Pvt.Ltd
Bikaner
SUBMITTED TO :
Mr. Hardayal Singh
HOD (ECB )
Matrimonial Management
ON
MATRIMONIAL-MANAGEMENT
Project Submitted in partial fulfilment of
the requirement of the award of the degree
of
(2006-2009)
SUBMITTED BY
Rekha narooka
MSc. IT VI Semester
UNDER GUIDANCE OF
Miss Dipika
Acme Embedded Technologies Pvt.Ltd
Bikaner
SUBMITTED TO :
Mr. Hardayal Singh
HOD (ECB )
Matrimonial Management
PREFACE
The Industrial training is a part of curriculum of M.Sc. COURSE. There is a
provision of Industrial training of 6 months. It is aimed to provide student industrial
exposure. Student are expected to learn the technical aspects of the theoretical studies
applied in the industry.
I select ACME EMBEDDED TECHNOLOGIES BIKANER for my industrial
training .It is a Software Engineering Services company with experience in enterprise
applications for a wide spectrum of domains including supply chain, manufacturing
performance,asset visibility, business continuity planning, and finance. These
applications have been developed on a variety of platforms .Net.
This Project is submitted at ENGINEERING COLLEGE, BIKANER and this report
contain the complete details regarding the project work done on the MATRIMONIALMANAGEMENT.
The matter in the report is organized in a number of sections with important
diagrams. This gives an easy and clear understanding of text.
ACKNOWLEDGEMENT
3
Matrimonial Management
Any accomplishment requires the effort of many people and this project work is no
different. I am highly obliged and grateful to all those who have helped me in the
development of this project and provided all encouragement and dedication that have
helped me immensely in my project work.
I sincerely thanks to Miss DIPIKA for giving me opportunities to have training in ACME
EMBEDDED TECHNOLOGIES.(BIKANER) and his valuable guidance , help and
encouragement in all aspects during my whole training .
I am also greatly indebted to Mr. HARDAYAL SINGH (H.O.D.-MSc., Engineering
College Bikaner) and other faculty for their kind help and cooperation in my project
work.
Once again I express my gratitude to ACME EMBEDDED TECHNOLOGIES, Bikaner for
their kind cooperation.
ACKNOWLEDGEMENT
4
Matrimonial Management
Any accomplishment requires the effort of many people and this project work is no
different. I am highly obliged and grateful to all those who have helped me in the
development of this project and provided all encouragement and dedication that have
helped me immensely in my project work.
I sincerely thanks to Miss DIPIKA for giving me opportunities to have training in ACME
EMBEDDED TECHNOLOGIES.(BIKANER) and his valuable guidance , help and
encouragement in all aspects during my whole training .
I am also greatly indebted to Mr. HARDAYAL SINGH (H.O.D.-MSc., Engineering
College Bikaner) and other faculty for their kind help and cooperation in my project
work.
Once again I express my gratitude to ACME EMBEDDED TECHNOLOGIES, Bikaner for
their kind cooperation.
(Rekha narooka)
MSc (VI SEM 2009)
Engineering College, Bikaner
University Of Rajasthan
Jaipur
Table Of Content
5
Matrimonial Management
Company Profile
About
Vision
Offering
Out Sourcing
Training
Why A.E.T.
Clients
Development Tools
9
9
11
11
12
12
13
13
Project Overview
Introduction to Project
Characteristic Of Project
Qualities of Project
Tools/Environment Used
17
19
20
26
Technologies Used
ASP.net
ASP.net forms
Database : MS Access
28
39
67
System Designing
Interface Design
Database Design
Screens Details
81
86
93
Matrimonial Management
Matrimonial Management
COMPANY PROFILE
Matrimonial Management
clients globally. A.E.T readiness to devote quality time towards clients to understand
their requirements and sincere efforts towards fulfilling commitments together go a long
way in assisting organization find the "Perfect Fit".
Furthermore, A.E.T professional attitude ensures that their relationships with clients are
enduring and always mutually beneficial.
Vision :
We believe in long-term business relationships, built on quality, trust and
excellent service support. Business is simply a by-product, which automatically comes
with it.
Simple things are simple and complex things are possible.
Making the simple complicated is commonplace; making the complicated simple,
awesomely simple, that's creativity.
Mission:
Simplicity is the soul of efficiency.
Simplicity is prerequisite for reliability.
Simplicity is the ultimate sophistication.
The unavoidable price of reliability is simplicity.
Simplicity and flexibility will trump optimization and power in a world where
connectivity is the key.
Simplicity does not precede complexity, but follows it.
Development
Acme Embeded Technologies have dynamic team of professionals and state-of-the-art
infrastructure.
Training Cell
A.E.T dedicated professional developers are known to deliver results.
Services
A.E.T. Unique Way- Development Process A.E.T. follow- Facilitating the process and
providing clients to their specific requirements. Effective Solutions customized to your
requirements. Service Oriented Architecture
Web Services- J2EE, .NET, PHP Web services.
Matrimonial Management
Hardware Section
A.E.T. deal in Branded Laptops, Desktops and accessories.(HP, LENOVO, ACER, DELL,
HCL, WIPRO)
Offering
With advancements in technology and availability of better infrastructure, corporate
requirements increased and A.E.T. were there to respond to the changing times. The web
sites fast became more interactive and database driven. Design scape developed some
application based web sites some of them went on to become premier in the country.
Web Development
Application Development
Domain Registration Services.
Commercial Web Hosting Services.
Dedicated Web Server Hosting.
Database Handling.
ERP Solutions.
Professional Web Designing Services.
Application Programming for the Internet.
Creative Graphic Design for the Internet and Print.
Multimedia Development.
Out Sourcing
Acme Group is well versed in web and software development. The kind of solutions
offered are not just limited to mere execution of client requirements. Creativity, talent
and expertise allow software developers to suggest ways in which client can transform
client business. In some cases, if client choose, Acme group can even define client
business model. Acme group adopt a customer centric approach where Acme make it
their job to listen, to research, and to understand the requirements, so that Acme can
10
Matrimonial Management
provide client with truly unique and effective solutions. A flexible outlook makes them
open to creating and developing any kind of web application.
Acme Group offers original and unique software which are easy and flexible to use. Acme
group products are suitable for everyday use by ordinary people.
Acme group also provide a small backup software program to backup client files and
documents through manual intervention or through automatic process. This backup
software act as a safeguard against treats such as virus attacks, accidental deletions,
system failure and harddisk crashes.
Training
Information Technology is a rapidly changing domain. To be at par with the changing
trends we have a dynamic team of professionals and state-of-the-art infrastructure. Our
dedicated professionals are known to deliver results in any situation and circumstances.
Our Strategic thinking team is one of its kind. The focus of our work is on raising
productivity through improved quality, efficiency and cost- reduction.
Matrimonial Management
Clients:
Clients and Partners play a vital role in our growth and success. The
paramount business strategy at A.E.T is building mutually beneficial partnerships with
customers and other service providers - to share domain expertise. Our abiding
relationships with customers have enabled us to leverage our involvement in developing
frontline solutions to help them emerge more competitive in their chosen markets and
domains.
Development Tools:
Microsoft Suite of Tools
ASP.Net:
VB.Net:
VC++
C#
MS Access
SQL Server.
12
Matrimonial Management
6. Windows System Programming using system APIs and 3rd Party Hardware
Integrations
JAVA
A.E.T. dominates with an experienced group of engineers with a technical
background, and with adequate business and communication skills. We are hardcore
patrons and evangelists of Java / J2EE, with skills in J2ME technologies also. Our
expertise ensures superior application quality and shorter development cycles in our
development work and strictly adheres to industry standards and best practices.
Companies can save on precious development time and cost by leveraging our Java /
J2EE development services.
J2EE (Enterprise Java Beans (EJB), Java Server Pages (JSP), Servlet)
Core Java
Java Swings
Java Server Faces (JSF)
JDBC
JNI
Java 2 Platform, Micro Edition (J2ME)
Apple Mac OSX Java
Java 2D
Java Mail
Apache Xerces (XML) and Xalan (XSLT) parsers
Ajax (Not really a part of Java, but adds to the development capabilities)
SOA (Not really a part of Java, but adds to the development capabilities)
Java API for XML Processing (JAXP)
Java API for XML-based RPC (JAX-RPC)
RMI / IIOP
Sun JDK1.3, J2SE, J2EE development platforms
PROJECT OVERVIEW
13
Matrimonial Management
1. Introduction To Project
2. Characteristics of Project
3. Qualities of Project
4. Keys Of Project Success
5. Evaluation Criteria
6. Process Involved in Project Development
7. Tools/Environment Used
INTRODUCTION TO PROJECT
Project is actually a carefully planned and organized effort, which is set to accomplish
a particular project in a one-time deal. Project includes the development of the intended
project plan. This may seem simple yet it involves planning and organizing all the needed
details for the successful implementation of the project. The process of project
commonly includes defining the goals of the project, setting project bjectives, specifying
14
Matrimonial Management
tasks in order for goals to be achieved, the needed resources and budget, timelines and
completion dates.
Furthermore, proper project includes implementing the project
plan to make sure that each step is being properly followed. Highly organized would
properly define a well-considered project plan following carefully differentiated steps to
complete the project. Feasibility studies would be the first step, followed by project
planning then implementation, evaluation, and finally maintenance or support.
Introductions to help you find that special person. Start Interacting with the finest
Clients, Lawyers Doctors, Busy Pfessionals.Matchmaking of the highest order.We
have made virtually possible for the hosts to walk in as guests at their own function.
we provide some special venues or services.
We have creative, professional, talented and strong networked team, we can provide
services that take care of the minutest details of the wedding and all the functions related
to the same
The exclusive matchmaking service to help you find your life partner. As a member of
Hastamilan.com you would enjoy the following features.
Following things are provided by this project: It provides greater accuracy of information with detailed control, better
presentation which is satisfactory for the customer.
Register Yourself- Entire page devoted to you.
Matrimonial Management
Add Your photo-add your photo.
It provides identified customer database which is usable by all application.
Profile Statistics- You can track the response to your profile.
Contact Other Members- Send as many email as you like.
Perform Searches- You can specify exactly what you are looking for.
Security and Discretion- password protected.
Characteristics Of Project
These are the some attribute that makes a successful project and we also try to follow
these qualities
Correct: Each requirement must accurately describe the functionality to be delivered. The
reference for correctness is the source of the requirement, such as an actual customer or
a higher-level system requirements specification. Only user representatives can
determine the correctness of user requirements, which is why it is essential to include
them.
Necessary: Each requirement should document something the customers really need or
something that is required for conformance to an external requirement, an external
interface, or a standard. Another way to think of "necessary" is that each requirement
originated from a source you recognize as having the authority to specify requirements.
Trace each requirement back to its origin, such as a use case, system requirement,
regulation, or some other voice-of-the-customer input.
16
Matrimonial Management
Unambiguous: The reader of a requirement statement should be able to draw only one
interpretation of it. Also, multiple readers of a requirement should arrive at the same
interpretation. Natural language is highly prone to ambiguity. Avoid subjective words
like user-friendly, easy, simple, rapid, efficient, several, state-of-the-art, improved,
maximize, and minimize. Write each requirement in simple, straightforward language of
the user domain.
17
Matrimonial Management
Modifiable: You must be able to revise the project when necessary and maintain a history of
changes made to each requirement. This means that each requirement be uniquely
labeled and expressed separately from other requirements so you can refer to it
unambiguously. You can make a project more modifiable by organizing it so that related
requirements are grouped together, and by creating a table of contents, index, and crossreference listing.
Traceable: You should be able to link each software requirement to its source, which could
be a higher-level system requirement, a use case, or a voice-of-the-customer statement.
Also link each software requirement to the design elements, source code, and test cases
that are constructed to implement and verify the requirement.
Qualities of Project
18
Matrimonial Management
There do seem to be three factors that all successful projects have in common.
Each of these factors is key to any projects success. Each project can be viewed as a
tripod. All three legs must be in place for the tripod to stand sturdily. In a systems
project, these legs or critical success factors consist of the following:
Evaluation criteria
Complexity
Manual based system is too complex to handle because it is too large and at the
same time it is operated by number of personnel so that there are lots of inefficiency and
inaccuracy too. We needed something that was easy to understand on the surface as both
staff and client had to be able to grasp it but had sufficient depth to give developers the
guidance they needed.
Size
In computer based system the size of the project is much less than compare to
manual system .because in computer based system all data is stored at a single place so
it is easy to extract it and there is also no duplication of the data.
Cost
Anything that cost money would have to be justified; the less money that was
required, the better. Every project will cost something and you need to discuss those
costs in your plan. We have five steps by which we can easily describe the whole
processing of the project These steps are:
19
Matrimonial Management
support the project requirements. This is the time to capture the project in a list of
features. This does not require collaboration: getting a group of people involved at
this stage would not be productive or constructive. The key to this process lies in
defining the project using the language. This means that the client will be able to
understand and value each feature, but it also enforces a common language across
the project team and reduces the risk of miscommunication or assumptions.
20
Matrimonial Management
sound simple and obvious, but it should not be underestimated. The focus that this
step brings is incredible and affects the project in many ways.
Process 3: Planning
Process 3 is an initial project-wide activity to produce the development plan.
This process extends the benefits provided by Process 2. It provides the Project
with a means of planning the development phase in a meaningful way for both the client
and the programmers. It is completed in conjunction with the Development Manager
and Chief Programmers, who look, in particular, at the order in which features will be
built, balancing load within the team and providing strategies for delivering early results
to keep the client happy.
It might seem like commonsense to design, and inspect that design, before
building, but this step is often ignored. In many other industries, the idea of building
something before it has been fully defined, designed and planned would be considered
negligent,. Project is enormous.
Putting the detailed design in this later stage ensures that it is considered at the
right time: before the code is written. It also breaks the design down into meaningful
chunks, feature by feature. This means programmers don't feel like they're spending all
their time designing and no time coding; immediately after
the design has been completed and inspected, the programmer can start to
code.
21
Matrimonial Management
inspections is enforced. What makes Process 5 unique is the final step, "promote to
build".
For code to be "promoted to build" it must be finished. The key to this is the
definition of "finished". A feature is not finished until there is nothing else to be done.
The Project Manager needs to focus programmers on getting the project completed. This
process is a great way to ensure that focus. The other benefit of this process is that helps
the Project Manager see clearly how much of the project has been completed.
22
Matrimonial Management
it is ideal to select one language and work with it exclusively. This helps build internal
skills with a specific language and keeps maintenance costs lower.
TOOLS/ENVIRONMENT USED
23
Matrimonial Management
Front End/UI:-ASP.Net
Back End
:- MS Access
Software:
Windows XP
Databases
MS Access
TECHNOLOGY USED
24
Matrimonial Management
ASP.NET
ASP.NET
25
Matrimonial Management
EVALUTION OF .NET
Microsoft's .NET initiative is broad-based and very ambitious. The .NET Framework
introduces a completely new model for the programming and deployment of
applications.
The .NET Framework introduces a completely new model for the programming and
deployment of applications. .NET presents a radically new approach to software
development. This is the first development platform designed from the ground up with
the Internet in mind. Previously, Internet functionality has simply been bolted on to preInternet operating systems like UNIX and Windows. This has required Internet software
developers to understand a host of technologies and integration issues. .NET is designed
and intended for highly distributed software, making Internet functionality and
interoperability easier and more transparent to include in systems than ever before.
The vision of .NET is globally distributed systems, using XML as the universal glue to
allow functions running on different computers across an organization or across the
world to come together in a single application. In this vision, systems from servers to
wireless palmtops, will share the same general platform, with versions of .NET available
for all of them, and with each of them able to integrate transparently with the others. But
this does not leave out classic applications, as we've always known them. .NET also aims
to make traditional business applications easier to develop and deploy. Some of the
technologies of .NET, such as Win Forms, demonstrate that Microsoft has not forgotten
the traditional business developer.
26
Matrimonial Management
improvement. That team began to work on a new architecture implementing those ideas.
This project eventually came to be known as Next Generation Windows Services
(NGWS).
After Visual Studio 6 was released in late 1998, work on the next version of Visual Studio
(then called Visual Studio 7) was folded into NGWS. The COM+/MTS team brought in
their work on a universal runtime for all the languages in Visual Studio, which they
intended to make available for third party languages as well.
The subsequent development was kept very much under wraps at Microsoft. Only key
Microsoft partners realized the true importance of NGWS until it was re-christened as
.NET and introduced to the public at the PDC. At that point, development had been
underway for over two years, and most attendees were pleasantly surprised to see the
enormous strides Microsoft had made.
The concepts in .NET draw inspiration from many sources. Previous architectures, from
p-code in UCSD Pascal up through the Java Virtual Machine, have similar elements.
Microsoft has taken many of the best ideas in the industry, combined with some ideas of
their own, and brought them all into one coherent package.
Since quite some time each person is talking about .NET, but
what actually is .NET?
The .NET Framework introduces a completely new model for the programming and
deployment of applications. .NET is Microsoft's vision of "software as a service", a
development environment in which you can build, create, and deploy your applications
and the next generation of components, the ability to use the Web rather than your
own computer for various services.
Microsoft introduced great technologies like COM, DCOM, COM+ etc. to enable reuse of
Software. Although these technologies are very powerful to reuse Software, they required
a huge learning curve. According to this aspect, Microsoft realized that its time to come
up with a new Technology, a better one, an easier one, a new Framework, within which
each Programming Task is easy accomplished. It provides the easiest and most scalable
way to build, deploy and run web services. ASP.NET server controls enable an HTMLlike style of declarative programming that let you build great pages with far less code
than with classic ASP. VB, C++ and C# Code can be used in other languages f.e.
code written in VB can be easily used in C# or in VC++. Also a benefit is that the you can
step between the languages in the debugger.
27
Matrimonial Management
Windows API from development. It includes a class library with more functionality than
any other created to date, and a development environment that spans multiple
languages. Further more, it exposes an architecture that makes multiple language
integration simple and straightforward.
In short, .NET presents a radically new approach to software development. This is the
first development platform designed from the ground up with the Internet in mind.
Previously, Internet functionality has simply been bolted on to pre-Internet operating
systems like Unix and Windows. This has required Internet software developers to
understand a host of technologies and integration issues. .NET is designed and intended
for highly distributed software, making Internet functionality and interoperability easier
and more transparent to include in systems than ever before.
The vision of .NET is globally distributed systems, using XML as the universal glue to
allow functions running on different computers across an organization or across the
world to come together in a single application. In this vision, systems from servers to
wireless palmtops, will share the same general platform, with versions of .NET available
for all of them, and with each of them able to integrate transparently with the others. But
this does not leave out classic applications, as we've always known them. .NET also aims
to make traditional business applications easier to develop and deploy. Some of the
technologies of .NET, such as WinForms, demonstrate that Microsoft has not forgotten
the traditional business developer.
Second, the compiled code will be recompiled with the Common Language
Runtime (CLR ), which converts the code to the machine code.
The basic Idea of these two stages was to make the code language independence.
28
Matrimonial Management
29
Matrimonial Management
around creating their own extensions and their own fancy new data types. CLS is the
collection of the rules and constraints that every language (that seeks to achieve .NET
compatibility) must follow. Microsoft has defined three level of CLS
compatibility/compliance. The goals and objectives of each compliance level has been set
aside. Given below are the three compliance levels with their brief description:
COMPLIANT PRODUCER
The component developed in this type of language can be used by any other language.
CONSUMER
The language in this category can use classes produced in any other language. In simple
words this means that the language can instantiate classes developed in other language.
This is similar to how COM components can be instantiated by your ASP code.
EXTENDER
Languages in this category can not just use the classes as in CONSUMER category; but
can also extend classes using inheritance .Languages that come with Microsoft Visual
Studio namely Visual C++, Visual Basic and C#; all satisfy the above three categories.
Vendors can select any of the above categories as the targeted compliance level(s) for
their languages.
30
Matrimonial Management
achieved through a common language runtime (CLR) that provides a managed execution
environment available to any language that targets the runtime. The functionality this
execution environment provides is made available to these languages through the .NET
Framework class library. Figure 1-1 illustrates how the CLR relates to the .NET
Framework.
ASP.NET is the name Microsoft has given to the combination of its two web development
technologies: Web Forms and Web Services. Using ASP.NET, it is easier than ever to
create web applications that are dynamic and data-driven, that scale well, and that work
well across a broad range of browsers without any custom coding by the developer.
31
Matrimonial Management
Int NumberOfStates
While naming a variable, you have to remember the following rules:
All variable names must begin with a letter (not a number or symbol)
They may not contain an embedded period (full-stop) or a space
They cannot be the same as C# reserved words (keywords) such as if and void
In C#, variable names are case sensitive. In the following example, the first line declares
a variable as a string type with the name strCarType; the second line assigns a string
value to that variable:
String strCarType;
StrCarType = "Buick";
32
Matrimonial Management
It's also possible to declare a variable and assign a value to it on a single line:
String strCarType = "Buick";
If you have several variables of the same type, you can set them up with one line of code
(see Demo-VariableDeclare.aspx in the code download):
string strCarType1, strCarType2, strCarType3;
strCarType1 = "Buick";
strCarType2 = "Cadillac";
strCarType3 = "Pontiac";
You can also initialize and assign values to them on one line as follows:
String strCarType1 = "Buick", strCarType2="Cadillac", strCarType3="Pontiac";
However, you can not mix data types in one line of initialization or filling. The following
line will not Work:
String strCarType1, int strCarType2, date strCarType3;
Now let's use our knowledge of variable declaration and assignment in an example. We'll
take the code above and combine it with ASP.NET server controls.
Data types
C# supports about two-dozen data types. These datatypes can be roughly divided into
three groups:
numeric, text, and miscellaneous datatypes.
Numeric
Numeric datatypes represent eleven of the C# datatypes. They are divided into three
groups: integers, floating-point, and decimals.
Integers
Integers are whole numbers (numbers without a decimal component). Examples of
integers are 3, -12, and 0. The various storage formats for integers vary with the size of
integer that needs to be stored. You can use these types as per your requirements to
make optimal use of memory resources:
int: The integer datatype is referred to as int in code; can store whole numbers up to
about 2 billion (2,147,483,648), both positive and negative.
uint: Stores integers from 0 to 4 billion, but this range can consist of only positive
numbers.
byte: Can be used to store integers between the range 0 to 255, but negative values are
not allowed. It's a useful type because a variable can easily be stored by the computer
33
Matrimonial Management
within a single byte a computer's basic storage unit and any processing or arithmetic
done with them is therefore faster.
sbyte: Same as byte but allows negatives, so the range is reduced to 128 to +127.
short: As the name implies, can only accept a limited range of values, from 32,768 to
+32,767.
ushort: is like uint and can be used for unsigned (positive) numbers; since memory
space is not used for the sign, the value can go up to 65,535.
long: Similar to the int type, but supports a much larger range; can contain a value up
to 9,223,372,036,854,775,808 (that is 9 x 10^19), either positive or negative.
ulong: Allows positives up to about 18 x 10^18.
Floating-Point Numbers
Floating point datatypes can store numbers with decimal places. The various floating
point datatypes supported by C# are:
float: Holds single precision floating-point numbers. The float type supports values
within the range -3.402823E38 to -1.401298E-45 (for negative values), and 1.401298E45 to 3.402823E38 (for positive values).
double: Holds double precision floating-point numbers. The range of double is 1.79769313486232E308 to -4.94065645841247E-324 (for negative values), and
4.94065645841247E- 324 to 1.79769313486232E308 (for positive values).
Decimal
The decimal type accepts numbers with about 28 digits, which you can allocate between
the left and right side of the decimal point. With zero decimal places, it can support large
positive or negative numbers with up to 27 following zeros. Alternatively, you can store a
very accurate number with about 27 digits to the right of the decimal point.
to settle for a smaller datatype. If you have violated the limits of a Numeric type you will
get an error such as "CS1021: Integral constant is too large" or "Cannot convert."
Matrimonial Management
Text Datatypes
Normally text datatypes store words or letters, but you can also use them to store
symbols and numbers. At the same time, you should not store numbers that you plan to
use in arithmetic. For example, a string variable called MyString can hold values like
"2.0" or "July 4, 2004". However, you will not be able to perform any calculations on
these values. Numbers usually go into one of the numeric datatypes. An exception to this
is a number that you will not perform any math with, such as telephone numbers, social
security numbers, and catalog numbers that may contain a mix of numbers and letters;
these are usually better stored as strings. There are just two datatypes for storing text.
The string datatype is almost always used. The other, char, stores only one character of
text and it is in an encoded form.
String
The string type identifies its stored value as text, even if you supply it with a mixture of
text and numerical data, numerical data alone, or even date information. A string
variable will grow or shrink to accommodate any number of characters. However, it does
not inherently contain any formatting like line breaks. See the following example on the
string datatype (see Demo-VariableStringAndChar.aspx):
string CarType;
string CarEngineSize;
string CarModel;
string DatePurchased;
CarType = "Buick";
// this is normal
CarEngineSize = "2.0";
// this works, but is not normal
CarModel = "123-Z-456";
// OK because these numbers do not have a mathematical values
DatePurchased = " July 4, 1999";
// this works, but it is better to use the date type
As mentioned earlier, string values are encapsulated in double quotation marks, so they
can be differentiated visually from numerical values without having to reference their
actual declarations. The .NET Framework provides a number of special methods by
which you can manipulate strings. These methods allow you to measure the length of a
string, truncate a string at the beginning or end, return certain characters from a given
string, or even convert a string into its numerical equivalent.
Char
35
Matrimonial Management
The char data type is a bit of a strange one, because it stores text as a number! This
means you place a single character in a variable defined as a char, and it is stored as a
number between 0 and 65535. The large storage capacity provides the ability to store
characters from non-English languages. You store the value as follows:
Char MyLetter;
MyLetter = 'Q';
When you display the contents of a char variable, you see a text character despite the fact
that it is stored as a code number.
Other Datatypes
The next few datatypes don't really fit together, as they have nothing in common other
than the fact that they are not numeric or text.
Date
The date datatype is treated differently than the text or numeric types. You must be
accurate in entering and reading data. The date cannot be entered directly as a string.
Rather, it must be converted using a function Convert.ToDateTime(). Within the
parenthesis, place the date string in the format set by the Server's Windows Regional
settings. For example, in the USA, this would be mm/dd/yy, dd/mm/yyyy in the UK, and
dd.mm.yyyy in Germany. Conversely, when reading a date from a variable, you need to
convert it to a string if you want to display it in a label:
DateTime MyDateTime; //declares the variable
MyDateTime = Convert.ToDateTime(txtDateIn.Text); //fills the variable
lblDateOut.Text = Convert.ToString(MyDateTime); //reads the variable
// alternate formats for input
MyDateTime = Convert.ToDateTime("1/1/2005");
MyDateTime = Convert.ToDateTime("4:25:05 PM");
MyDateTime = Convert.ToDateTime("16:25:05");
MyDateTime = Convert.ToDateTime("1/1/2005 16:25:05");
// following line fails - use 24 hour time or AM/PM but not both
MyDateTime = Convert.ToDateTime("16:25:05 PM");
Matrimonial Management
Boolean
Boolean variables can be set to one of two values: true or false. There are no acceptable
alternatives such as 0 or 1 like in other languages. Note that true or false as a value
should not be in quotes and must be all lower case as shown here:
bool MyBool; //'my variable to indicate membership
MyBool = true; // note lower case, no quotes
Naming Variables
As we've seen earlier, there are four basic rules for naming variables. First, all variable
names must begin with a letter (not a number or symbol). Second, they may not contain
an embedded period (or full-stop) or a space. Third, they cannot be the same as C#
reserved words (keywords), such as if and void. Lastly, C# variables are case sensitive.
Some programmers use the following kinds of non-descriptive variable names:
int i;
bool varBoolean;
int Counter;
DateTime Date;
This is a sloppy way of coding because such variable names increase the cost of creating
and maintaining an application. At the same time, excessively long variable names are
unwieldy and easy to mistype. Good programming practice is to use suitable names for
variables that are meaningful to those who subsequently read the code. When your
variable name has more than one word, you can use two techniques. Some people like to
separate the words with underscores like Name_ First. Some prefer to use 'Pascal case',
wherein letters are lower case except the first of each word used in the variable, like
NameFirst. You could also use 'Camel case,' which is the same as Pascal case, but with
the first letter of the variable name in lowercase.
Here are some additional naming tips:
DataStart and DateEnd are better than StartDate and EndDate, as these two related
variables will then come next to each other in an alphabetically sorted search.
Variables like Price, Name, and Number are confusing because there are usually more
than one of these. It is better to use a NounAdjective combination like NameFirst and
NameLast.
Variable names that coincide with datatypes aren't allowed.
Avoid confusing and non-intuitive abbreviations, such as FDOM for first day of month
FDOM could stand for anything.
37
Matrimonial Management
Never use the same variable name for two different variables in a Web site, no matter
how sure you are that they will not conflict.
A very common mistake occurs in programming when a variable of one type is used as if
it is of another type. For example, a line of code tries to subtract a string from a date and
throws an error. The sensible answer is to use a naming convention that identifies the
type of a variable. The most common convention, called the Hungarian notation, is to
use the first three letters of a variable's name to distinguish the type. The fourth letter of
the variable is then typed in uppercase, to indicate that this is where the actual variable
name starts. There are variations to this convention that are used by programmers. The
following table lists some examples of the usage of this notation:
Data type
bool
byte
char
DateTime
double
decimal
float
int
long
short
string
Prefix
Example
bln
byt
chr
dat
dbl
dec
Flt
int
lng
sho
str
blnMember
bytDaysInMonth
chrWang
datDatePurchased
dblPi
decSalary
fltRate
intDistanceToSun
lngDistanceToStar
shoNumberOfAtoms
strNameFirst
Variable Scope
A few simple questions arise when we consider using variables. How widely available is a
variable? If a variable is created, can it be used by other events and methods on the page?
Can it be seen by other pages, or can other users visiting the same Web site see it? These
are the issues of scope a definition of how widely a variable can be used. We will study
three levels of variables: block, function, and global. It is important to create your
variables with the least amount of scope to do the job. Then, when a variable is no longer
needed it is destroyed and memory is freed up. Remember that the more limited the
scope of variables, the faster your programs will run.
Block-Level Variables
The block-level scope is the most limited in nature. A set of statements enclosed by curly
braces after an if (or while) statement is considered a block Variables created within the
38
Matrimonial Management
block scope can be used only within that block. When the block ends (say, after the last
loop), the variable is destroyed. In the following example, the scope of the variable
strBlockLevelVariable within the highlighted code and strBlockLevelVariable can no
longer be
You can't have two variables with the same name within the same
scope. To be safe, avoid duplicating a variable name anywhere within
a Web site. Do not rely on differences in case to differentiate between
two variables.
Function-Level Variables
The next wider level of scope is the function-level variable. These variables are available
to all of the code within a function (for example, the Page_Load() method). They can also
be called local variables because they are local to the function that created them. Outside
that function, the local variable has no value; this is because the lifetime of the variable
ends when the subroutine ends.
Constants
There will be occasions when you want the value assigned to a variable to remain
constant throughout the execution of the code, for example sales tax percentage. This
value will rarely change, yet when calculating the total of a shopping basket, you'll
probably need to refer to it several times. Even if the tax is changed, you would not need
to change the value during the code execution rather, you would change it manually
during a design mode edit of the code. C# allows you to store unchanging data in a
constant. The main reason you'd assign a value to a constant is to prevent its alteration
by a mistakenly written line of code.
Const int ABSOLUTEZERO = -273
Suppose we tried to assign another value to ABSOLUTEZERO, such as:
ABSOLUTEZERO = 0
Data Collections
All in all, arrays are quite simple to understand and very easy to use. However, we often
need more sophisticated ways to group items together. These advanced techniques in C#
39
Matrimonial Management
are grouped as collections and include the ArrayList, the HashTable, and the SortedList.
Collections are characterized by:
A collection can contain an unspecified number of members.
Elements of a collection need to be related only by the fact that they exist in the
collection.
Elements of a collection do not have to share the same datatype.
An object's position in a collection can change whenever a change occurs in the
collection as a whole. Therefore, the position of a specific object in the collection can
vary.
Operators
Assignment Operator
The familiar equals sign (=) assigns a value to a variable or control value. (Note that the
symbol = = is a test for equality, different from an assignment.) The variable name goes
on the left; the variable value goes on the right. C# doesn't enforce spaces on either side
of the equals sign, but you may prefer to include some to make your code easier to read:
intMyVariable = 2;
lblMyLabel.Text = "Sale Ends January 15.";
You can also use the assignment operator to change values of variables using the
following syntax:
intMyVariable = 2;
intMyVariable = intMyVariable + 1
C# also offers a shorter syntax to perform the above task, at the end of which
intMyVariable equals three:
intMyVariable = 2
intMyVariable += 1
Arithmetic Operators
The arithmetic operators available in C# are:
40
Matrimonial Management
Operator
Symbol
Addition
+
*
/
^
~
%
Subtraction
Multiplication
Division
Exponentiation
Negation
Modulus
String Concatenationg
To concatenate two strings, use the plus operator (+). You can concatenate the strings
"Spring" and "Sale", as follows (see this in action in Demo-Concatenation.aspx available
at www.wrox.com):
string strSaleNote1;
strSaleNote1 = "Spring" + "Sale";
Symbol
Operator
Equality
==
41
Matrimonial Management
Less than
<
<=
!=
Inequality
Greater than
>
>=
Logical Operators
C# also provides a set of three common logical operators you can use in your code:
&&: used for AND
||: used for OR
!: used for NOT
Logical operators are used in the same way as comparison operators and the whole
expression evaluates
to a Boolean value:
intNumber1 == 1 && intNumber2 == 2
42
Matrimonial Management
This section demonstrates how some of the ASP.NET server controls work and compares
the way in which they are used to the way in which information is passed in their
equivalent HTML form control. It also shows the separation of the presentation code
(HTML) from the code that provides the content (ASP.NET).
Purpose
Display text
Offer the user a list of items
from which to select.
Offer the user a list of items from
which to select in a compact format.
Matrimonial Management
<asp:CheckBox> and
<asp:CheckBoxList>
<asp:Button>
<asp:Label>
Let's start with a small but very useful control, the <asp:Label> control. This control
provides an effective way of displaying text on your Web page in ASP.NET, similar to the
HTML <span> tag. By having a control for text, you can manipulate its contents and
visibility from your ASP.NET code.
<asp:Label> Attributes
Text: Sets the text that you want the label to display
Visible: Sets the visibility of the label on the page (true or false)
BackColor: Sets the background color of the label
ForeColor: Sets the foreground color of the label
Height: Sets the height in pixels of the label
Width: Sets the width of the label
<asp:DropDownList>
Before moving onto the <asp:DropDownList> control, let's pause to look at its HTML
form control equivalent. Dropdown listboxes are a series of <option> tags within a pair
of <select> tags as shown:
<select name="lstCities">
<option>Madrid</option>
<option>Oslo</option>
<option>Lisbon</option>
</select>
44
Matrimonial Management
The three important differences between the ASP.NET control and the HTML form
control are:
The <asp:DropDownList> tag directly replaces the <select> tag
The <asp:ListItem> tag replaces the <option> tag
The id attribute replaces the name attribute
<asp:ListBox>
The <asp:ListBox> server control resembles the dropdown list control, except that it
doesn't drop down and is capable of multiple selections. The <asp:ListBox> has the
following syntax:
<asp:TextBox>
This control is ASP.NET's version of the HTML <textbox> and <textarea> controls. In
fact, textareas are simply textboxes that feature multiple lines, thus allowing you to input
larger quantities of text. The TextBox control also provides the functionality of an HTML
form password control. To enable these variations the <asp:TextBox> control needs
some extra attributes:
textmode: Specifies whether you want the control to have one line (not set), many lines
(set to multiline), or have a single line of masked content (set to password)
rows: Specifies the number of rows you want the textbox to have and will only work if
textmode is set to multiple
columns: Specifies the number of columns you want the textbox to have and will only
work if textmode is set to multiple.
Matrimonial Management
The <asp:RadioButtonList> control works in the same way as its HTML forms
equivalent or the Windows interface. Choice of one button excludes the selection of
another button within the group. Note that the identifier for the whole group is set only
once in the id attribute of the <asp:RadioButtonList> control:
<asp:RadioButtonList id="radSample" runat="server">
<asp:ListItem id="option1" runat="server" value="Option A" />
<asp:ListItem id="option2" runat="server" value="Option B" />
<asp:ListItem id="option3" runat="server" value="Option C" />
</asp:RadioButtonList>
The if Structure
The basic if statement has three parts:
. An expression: a test that evaluates to either true or false
. An "if true" section of code
. An (optional) "if false" section of code
There are four ways of building if statements. Selection of proper syntax depends on two
critera:
Do I want to do anything if the test is false?
Do I want to execute more than one statement if the test is true?
if()
46
Matrimonial Management
The first and the simplest syntax is useful if you only want to run one statement in the
case of a true condition. Using this method, you will not be able to execute any
statements if your expression evaluates to false.
if (expression) one line of code to execute if expression is true;
if (chkFaxConfirm.Checked = true) lblFax.Text = "We will confirm by fax.";
if() {}
The next most complex syntax is where you want to execute more than one statement in
the case of true, but still nothing if the test is false.
if (expression)
{
code to execute if true line 1;
code to execute if true line 2;
}
if()else
The third level is where you want to execute one or more statements in the case of true,
and one or more lines of code if the test is false.
if (chkShipByGovernment.Checked == true)
{
lblAddress.Text = "Please enter your post office box number";
txtAddress.Visible=true;
}
else
{
lblAddress.Text = "Please enter your street address";
txtAddress.Visible=true;
}
if()else if()
The fourth level is quite complex but there are some situations where it cannot be
avoided. It allows you to choose between several different pieces of code to execute
according to multiple expressions. To do this, you need to separate each new expression
47
Matrimonial Management
with the keywords else if(). You can also include a non-expression else clause that will be
executed if none of the other cases were chosen.
<form runat="server">
<asp:TextBox id="txtAge" runat="server" / >
<asp:CheckBox id="chkIsMember" runat="server" / >
<asp:Label id="lblOut" runat="server" / >
</form>
if(Page.IsPostBack)
{
if(chkIsMember.Checked==true)
{
lblOut.Text = "Members get a free ticket";
lblOut.BackColor=System.Drawing.Color.LightPink;
}
else if(Convert.ToInt32(txtAge.Text)<=18)
{
lblOut.Text = "Students get a free ticket";
lblOut.BackColor=System.Drawing.Color.LightPink;
}
else
{
lblOut.Text = "Price is 500";
lblOut.BackColor=System.Drawing.Color.LightSeaGreen;
}
} //end if(Page.IsPostBack)
48
Matrimonial Management
string confirmation = txtIn.Text;
switch(confirmation)
{
case "fax":
lblOut.Text = "Fax confirmation takes 12 hours.";
break;
case "telephone":
lblOut.Text = "Telephone confirmation takes 24 hours.";
break;
case "email":
lblOut.Text ="Email confirmation takes 1 hours.";
break;
}
For example:
<%@ Page Language="C#" Debug="true" %>
<script runat="server">
void Page_Load()
{
if(Page.IsPostBack)
{
lblMessage1.Text = "";
for(int intLineLoopCounter = 1;
intLineLoopCounter<=Convert.ToInt32(NumberAttendees.SelectedItem.Value);
intLineLoopCounter++)
{
lblMessage1.Text += "Attendee Name <br /><br />";
lblMessage1.Text += "Attendee Age <br /><br /><hr /><br />";
} //end for intLineLoopcounter
} //end if(Page.IsPostBack)
} //end Page_Load
</script>
49
Matrimonial Management
<html>
<head>
<title>For Example</title>
</head>
<body>
<form runat="server">
Select the number of attendees:<br />
146
Chapter 4
<br />
<asp:dropdownlist id="NumberAttendees" runat="server">
<asp:listitem>1</asp:listitem>
<asp:listitem>2</asp:listitem>
<asp:listitem>3</asp:listitem>
</asp:dropdownlist>
<br />
<br />
<input type="submit" value="Submit Query" />
<br />
<br />
<asp:label id="lblMessage1" runat="server"></asp:label>
</form>
</body>
</html>
50
Matrimonial Management
51
Matrimonial Management
<script language="C#" runat="server">
void Page_load()
{
Random r = new Random();
int diceRoll = 0;
while (diceRoll != 6)
{
diceRoll = Convert.ToInt32(r.Next(6)) + 1;
message1.Text = message1.Text + "Rolled a: " + diceRoll + "<br />";
}
}
</script>
<html>
<head>
<title>While Loop Example</title>
</head>
<body>
<asp:label id="message1" runat="server"/>
</body>
</html>
The do...while
You're not restricted to having the condition at the beginning of your
loop. If you want your condition at the end use the do...while syntax. In this case the loop
will be run at least once because C# tests the condition after the loop.
do
52
Matrimonial Management
{
// looping code here
} while (condition);
<%@ Page Language="c#" Debug="true" %>
<script runat="server">
void Page_load() {
Random r = new Random();
int diceRoll;
message1.Text = "Lets get started. <br>";
do
{
diceRoll = Convert.ToInt32(r.Next(6)) + 1;
message1.Text = message1.Text + "Rolled a: " + diceRoll + "<br />";
}
while (diceRoll != 6);
message1.Text += "There is our six.";
}
</script>
<html>
<head>
<title>Do While Loop Example</title>
</head>
<body>
<asp:label id="message1" runat="server"/>
</body>
</html>
53
Matrimonial Management
Use do...while when actions within the loop absolutely have to occur
at least once no matter what the result of the expression. Use while
when there are actions within the loop that should not execute if the
expression is false.
54
Matrimonial Management
MS ACCESS
Introduction of MS Access
Microsoft Access provides users with one of the simplest and most flexible DBMS
solutions on the market today. Regular users of Microsoft products will enjoy the
familiar Windows look and feel as well as the tight integration with other Microsoft
Office family products.
History
Microsoft Access 1.0 was released in November1992.
Microsoft specified the minimum operating system for Version 1.1 as Microsoft Windows
v3.0 with 4 MB of RAM. 6 MB RAM was recommended along with a minimum of 8 MB
of available hard disk space (14 MB hard disk space recommended). The product was
shipped on seven 1.44 MB diskettes. The manual shows a 1993 copyright date.
Features
One of the benefits of Access from a programmer's perspective is its relative
compatibility with SQL queries may be viewed and edited as SQL statements, and SQL
statements can be used directly in Macros and VBA Modules to manipulate Access
tables. Users may mix and use both VBA and "Macros" for programming forms and logic
and offers object-oriented possibilities.
55
Matrimonial Management
Unlike a complete RDBMS, the Jet Engine lacks database triggers and stored
procedures. Starting in MS Access 2000 (Jet 4.0), there is a syntax that allows creating
queries with parameters, in a way that looks like creating stored procedures, but these
procedures are limited to one statement per procedure.[1] Microsoft Access does allow
forms to contain code that is triggered as changes are made to the underlying table (as
long as the modifications are done only with that form), and it is common to use passthrough queries and other techniques in Access to run stored procedures in RDBMSs
that support these.
56
Matrimonial Management
Layout of MS Access
57
Matrimonial Management
The table above contains the employee information for our organization -characteristics like name, date of birth and title. Examine the construction of the table
and you'll find that each column of the table corresponds to a specific employee
characteristic (or attribute in database terms). Each row corresponds to one particular
employee and contains his or her information. That's all there is to it! If it helps, think
of each one of these tables as a spreadsheet-style listing of information.
A database that only stored information would be useless -- we need methods to retrieve
information as well. If you simply want to recall the information stored in a table,
Microsoft Access allows you to open the table and scroll through the records contained
within it. However, the real power of a database lies in its capabilities to answer more
complex requests, or queries. Access queries provide the capability to combine data
from multiple tables and place specific conditions on the data retrieved.
Imagine that your organization requires a simple method to create a list of those
products that are currently selling above their average price. If you simply retrieved the
58
Matrimonial Management
product information table, fulfilling this task would require a large amount of sorting
through data and performing calculations by hand. However, the power of a query
allows you to simply request that Access only return those records that meet the above
average pricing condition. Additionally, you can instruct the database to only list the
name and unit price of the item.
SQL (pronounced "ess-que-el") stands for Structured Query Language. SQL is
used to communicate with a database. According to ANSI (American National Standards
Institute), it is the standard language for relational database management systems. SQL
statements are used to perform tasks such as update data on a database, or retrieve data
from a database. Some common relational database management systems that use SQL
are: Oracle, Sybase, Microsoft SQL Server, Access, Ingres, etc. Although most database
systems use SQL, most of them also have their own additional proprietary extensions
that are usually only used on their system. However, the standard SQL commands such
as "Select", "Insert", "Update", "Delete", "Create", and "Drop" can be used to accomplish
almost everything that one needs to do with a database.
Update query
Update query is used to update the records in the saved database. The
example of update query is as follows
string str = "Update re2 set Age='" + DropDownList8.Text + "',dob='" +
TextBox9.Text + "',Sex='" + rname + "',Height='" + DropDownList1.Text +
"',Weight='" + DropDownList2.Text + "',Religion='" + DropDownList3.Text
+ "',Caste='" + DropDownList4.Text + "',Rashi='" + DropDownList5.Text +
"',Nakshatra='" + DropDownList6.Text + "',Maritalstatus='" +
DropDownList15.Text + "',Education='" + DropDownList9.Text +
"',Manglik='" + rmangl + "',Profession='" + DropDownList7.Text +
"',AnnualIncome='" + DropDownList16.Text + "',Hobbies='" + TextBox4.Text
+ "',ResidentialStatus='" + TextBox2.Text + "',RisidingCity='" +
DropDownList11.Text + "',FatherName='" + TextBox3.Text +
"',FatherProfession='" + DropDownList13.Text + "',MotheName='" +
TextBox5.Text + "',MotherProfession='" + DropDownList14.Text +
"',FamilyBackground='" + TextBox10.Text + "',Maternal='" + TextBox6.Text
+ "',MaternalGrandMother='" + TextBox7.Text + "',PaternalGrandMother='"
+ TextBox8.Text + "',uploadphotos='" + HiddenField1.Value.ToString() +
"' where Name='" + TextBox1.Text + "'";
Insert query
string str = "Insert into re2 values('" +Txt_Name.Text + "', "+
Txt_Age.Text+",'"+Txt_Class'")";
59
Matrimonial Management
Delete query
string str = "delete from re1 where Name='"
+Listbox1.selectedItem.Text.Tostring()+ "';
Select query
string s = "select * from re1 where UName='"+TextBox6.Text+"'";
More queries
It is important to understand the processes that an organization is using to build secure
software because unless the process is understood, its weaknesses and strengths are
difficult to determine. It is also helpful to use common frameworks to guide process
improvement, and to evaluate processes against a common model to determine areas for
improvement. Process models promote common measures of organizational processes
throughout the software development life cycle (SDLC). These models identify many
technical and management practices.
However, there is probably a better likelihood of building secure software when an
organization follows solid software engineering practices with an emphasis on good
design, quality practices such as inspections and reviews, use of thorough testing
methods, appropriate use of tools, risk management, project management, and people
management.
The process is based on the strong belief that each step should serve a clear purpose and
be carried out using the most rigorous techniques available to address that particular
problem. In particular, the process almost always uses formal methods to specify
behavioral, security, and safety properties of the software.
60
Matrimonial Management
61
Matrimonial Management
The Software Development Life Cycle is the cycle in which the business analysts, the
software developers, the database designers and/or the database developers, the QA
developers and end users collaborate to build the application software. Basically, it
involves designing the application from scratch, documenting everything, adding the
improvements and fixing the bugs that occur in the SDLC. It is the lifecycle of Software
from concept to obsolescence.
A quality software system is based on the following three principles:
The software development life cycle (SDLC) may be divided into the following steps:
1.
2.
3.
4.
5.
6.
Software Testing
7.
8.
Final release
62
Matrimonial Management
Software Testing
After developing the software it is important to ensure that the functioning of it is
perfect. Software testing involves a mechanism that is used to report the bugs/undesired
results that may occur in the SDLC.
63
Matrimonial Management
Requirement Specification
Requirement Specification
Software Requirements Specification (SRS) provides a complete description of all the
functions and specifications of the software to be designed. It extracts the functional and
the nonfunctional requirements of the desired software product. It is the initial stage in
the SDLC, the first and the foremost step that has to be performed and includes the
information about the requirements for the proposed system. The requirements are
pertained to such as resources, scope of the system, purpose of the system and the
limitations. This phase is also known as the feasibility study phase. The Software
Requirements Specification Document that is created in this stage, states all the
necessary guidelines (the functional requirements, the nonfunctional requirements, etc.)
for the immediate next phase, the design phase and the software development life cycle.
It serves as a type of Bible for the Software Design Process.
64
Matrimonial Management
Architectural Design
After the requirements have been determined, the necessary specifications for the
hardware, software, people, and data resources, and the information products that will
satisfy the functional requirements of the proposed system can be determined. The
design will serve as a blueprint for the system and helps detect problems before these
errors or problems are built into the final system.
IS professionals create the system design, but must review their work with the users to
ensure the design meets users' needs.
65
Matrimonial Management
Maintenance
Software will definitely undergo change once it is delivered to the customer. There are
many reasons for the change. Change could happen because of some unexpected input
values into the system. In addition, the changes in the system could directly affect the
software operations. The software should be developed to accommodate changes that
could happen during the post implementation period.
Like any other engineering products, software products are oriented towards customers.
It is either market driven or it drives the market. Customer Satisfaction was the
buzzword of the 80's. Customer Delight is today's buzzword and Customer Ecstasy is the
buzzword of the new millennium. Products that are not customer (user) friendly have no
place in the market although they are engineered using the best technology. The
interface of the product is as crucial as the internal technology of the product.
Market Research
A market study is made to identify a potential customer's need. This process is also
known as market research. Here, the already existing need and the possible/potential
needs that are available in a segment of the society are studied carefully. The market
study is done based on a lot of assumptions. Assumptions are the crucial factors in the
development or inception of a product's development. Unrealistic assumptions can cause
a nosedive in the entire venture. Though assumptions are abstract, there should be a
move to develop tangible assumptions to come up with a successful product.
66
Matrimonial Management
Importance of planning
The planning stages, requirements analysis and architectural design, are the most
important stages. Good planning will help reduce errors and reduce the chance for
missing or extending production schedules. An undetected design error will take 10
times longer to fix during the debugging stage than had it been detected and corrected
during the planning stage.
Moving back
It is possible to go back to previous steps as subsequent analysis warrants. Typically, the
life cycle has a spiral shape rather than a linear one, with repeated steps back to prior
activities as requirements are refined and new information is gathered.
67
Matrimonial Management
User interface
The user interface definition is an important starting point in the application design
process and results in the creation of the user interface definition document. Two levels
of detail make up this document: the user interface mock-up and the user interface
details.
The user interface mock-up can vary from hand-drawn representations of Windows
forms to screen captures of a semi functional prototype. Its primary purpose is to
represent how the finished application will look and broadly define what functions the
application will perform.
The user interface details provide the next level of technical information. This specifies
exactly what user controls will be displayed within each Windows form. This
specification also includes additional details for each control, such as what events each
control responds to and what business functionality is executed. Finally, the specification
indicates data formatting and data validation. Data formatting outlines how a label or
textbox should represent data, such as percentages vs. currency. Data validation outlines
the acceptable ranges for textbox controls, such as restricting letters from a number
entry field.
A fundamental reality of application development is that the user interface is the system
to the users. What users want is for developers to build applications that meet their
needs and that are easy to use. Too many developers think that they are artistic geniuses
they do not bother to follow user interface design standards or invest the effort to make
their applications usable, instead they mistakenly believe that the important thing is to
make the code clever or to use a really interesting color scheme. Constantine points out
that the reality is that a good user interface allows people who understand the problem
domain to work with the application without having to read the manuals or receive
training.
User interface design important for several reasons. First of all the more intuitive the
user interface the easier it is to use, and the easier it is to use and the less expensive to
use it. The better the user interface the easier it is to train people to use it, reducing your
training costs. The better your user interface the less help people will need to use it,
reducing your support costs. The better your user interface the more your users will like
to use it, increasing their satisfaction with the work that you have done.
This is a need of every project that it can be easily understand by each user and to
achieve this purpose it is necessary that we consider on some issue so that we are able to
make a simple and straight forward project. For this we have to include those things in
the project which are easily understood by the user like
68
Matrimonial Management
Consistency:
We believe the most important thing we can possibly do is ensure our user interface
works consistently. If we can double-click on items in one list and have something
happen, then we should be able to double-click on items in any other list and have the
same sort of thing happen. we Put buttons in consistent places on all windows, use the
same wording in labels and messages, and use a consistent color scheme throughout.
Consistency in user interface enables users to build an accurate mental model of the way
it works, and accurate mental models lead to lower training and support costs.
69
Matrimonial Management
70
Matrimonial Management
71
Matrimonial Management
72
Matrimonial Management
Database Design
REGISTRATION 1 (re1):
UName
Pass
CPasswd
Gndr
Youremailaddress
Relgn
Lmlivingin
Typethecodeshere
REGISTRATION 2 (re2):-
Name
Age
Dob
Sex
Height
Weight
Religion
Caste
Rashi
Nakshatra
Maritalstatus
Education
Manglik
Profession
Annualincome
Hobbies
ResidentialStatus
RisidingCity
FatherName
FatherProfession
MotherName
MotherProfession
FamilyBackground
73
Matrimonial Management
Maternal
MaternalGrandMother
PaternalGrandMother
74
Matrimonial Management
Screens
For the very first time when we make project select this ASP web form
New web site window and click on the OK button.
75
Matrimonial Management
76
Matrimonial Management
MAIN SCREEN
1.LOGIN FORM:
Matrimonial Management
MATRIMONIALSITES
ASTROLOGY SITES
2.REGISTRATION FORM-1:
USER NAME
PASSWORD
CONFORM PASSWORD
GENDER
78
Matrimonial Management
3.REGISTRATION FORM-2:
DETAILS INFORMATION:
NAME
AGE
PHONENUMBER
79
Matrimonial Management
SEX
HEIGHT
WEIGHT
CASTE
RASHI
NAKSHATRA
MARITAL STATUS
EDUCATION
MANGLIK
PROFESSON
ANNUAL INCOME
HOBBIES
RESIDENTIAL STATUS
RISIDING CITY
80
Matrimonial Management
4.REGISTRATION FORM-2:
FAMILY DETAILS :
FATHERs NAME
81
Matrimonial Management
FATHER OCCUPATION
MOTHER NAME
MOTHER OCCUPATION
FAMILY BACKGROUND
CASTE DETAILS :
MATERNAL
MATERNAL GRAND MOTHER
PATERNAL GRAND MOTHER
PHOTO UPLOAD :
UPLOAD PHOTO
82
Matrimonial Management
5.CHANGE PASSWORD:
Matrimonial Management
OLD PASSWORD
NEW PASSWORD
CONFORM PASSWORD
User can fillup these above information and click on the CHANGE PASSWORD
button.
6.HOME PAGE:
LAYOUT-Home Page
After fillup the login id and password and click on the login button,this form
Appears and gives the many more facility to only registered member of the
HASTAMILANwebsite. In the HOMEPAGE form we gave the following MENUS:
SEARCH
UPDATION
84
Matrimonial Management
CONTACT US
ABOUT US
OBJECTIVES OF THE SITE - click this link to see objectives of the site.
HONEMOON PACKAGES
OTHER SERVICES
MATRIMONIAL SITES
ASTROLOGY SITES
7. UPDATE LOGIN:
85
Matrimonial Management
LAYOUT-Update Login
Only Loggedin user
can update the information.this form is password
protected.firstly user want to enter the userid and password then click on the
login button.
Click on the Login button and open the main Updation form.
8.UPDATION FORM1.1:
86
Matrimonial Management
LAYOUT-Updation Form1.1
when user Enter in Update Form ,the information is already see there,of logged
user.and user perform 3 tasks:
EDIT
UPDATE THE INFORMATION
CANCIL
UPDATION FORM1.2
87
Matrimonial Management
LAYOUT-Updation Form1.2
EDIT Click the edit button to enable the users information and EDIT
9. SEARCHES:
88
Matrimonial Management
LAYOUT-Searches
This searches form hold the different types of searches options In the
Search form we gave the following Links of searches:
SEARCH BY NAME
SEARCH BY RELIGION
SEARCH BY CASTE
SEARCH BY PROFESSION
89
Matrimonial Management
LAYOUT-Search by Name
This form perfom the search by name:
user can click on the dropdown list and select any name from
the dropdown list.
now choose the one name and click on one name .then whole
information is display in the name profile
90
Matrimonial Management
LAYOUT-Search by Religion
This form perfom the search by Religion.
user can click on the dropdown list and select any Religion from
the first dropdown list.now choose the one name from the
second dropdown list and click on one name .whole information
is display in the name profile.
Ex.select any one religion like Hinduism from first dropdown
list ,then automatically fillup names in the second dropdown
list thats are belongs to Hinduism religion.now select any one
name from the second dropdown list,like rekha and click on this
name . whole information is display in the religion profile.
91
Matrimonial Management
LAYOUT-Search by Caste
This form perfom the search by Religion.
user can click on the dropdown list and select any Caste from
the first dropdown list.now choose the one name from the
second dropdown list and click on one name .whole information
is display in the Caste profile.
Ex.select any one Caste like Rajput from first dropdown list
,then automatically fillup names in the second dropdown list
thats are belongs to Rajput Caste.now select any one name
from the second dropdown list,like rekha and click on this name
. whole information is display in the religion profile.
92
Matrimonial Management
LAYOUT-Search by Profession
This form perfom the search by Profession.
user can click on the dropdown list and select any Profession
from the first dropdown list.now choose the one name from the
second dropdown list and click on one name .whole information
is display in the Profession profile.
Ex.select any one Profession like Doctor from first dropdown
list ,then automatically fillup names in the second dropdown
list thats are belongs to Doctor Profession.now select any one
name from the second dropdown list,like rekha and click on this
name . whole information is display in the Profession profile.
93
Matrimonial Management
94
Matrimonial Management
CONTACT US
95
Matrimonial Management
LAYOUT-About us
This page of About us contains 2 types of layout:
About us [for login users] Holds the password protected links. And
these links contains login users information.
About us [for other users] Hold the external links which is not
effected to registered users information
Matrimonial Management
Matrimonial Management
98
Matrimonial Management
18.HONEYMOON PACKAGES:
99
Matrimonial Management
19.HONEYMOON PACKAGES:
100
Matrimonial Management
20.HONEYMOON PACKAGES:
101
Matrimonial Management
19.OTHER SERVICES :
This form show the list of needed things in any matrimonial status
and make a wedding which reflects user style, taste and personality,
all within user want.
Shows the list of services
Shows the contact number of management controllers
Shows the all internal links of the site thats used by logged in user
102
Matrimonial Management
20.ASTROLOGY SERVICES :
103
Matrimonial Management
ASTROLOGY SERVICES
Matrimonial Management
21.MATRIMONIAL SITES :
105
Matrimonial Management
MATRIMONIAL SITES
Matrimonial Management
System Testing
107
Matrimonial Management
System Testing
Once source code has been generated, software must be tested to uncover (and
correct) as many errors as possible before delivery to customer. Our goal is to
design a series of test cases that have a high likelihood of finding errors. To
uncover the errors software techniques are used. These techniques provide
systematic guidance for designing test that
(1) Exercise the internal logic of software components, and
(2) Exercise the input and output domains of the program to uncover errors
in program function, behavior and performance.
1 Steps. Software is tested from two different perspectives:
(1) Internal program logic is exercised using White box test case design
techniques.
(2) Software requirements are exercised using block box test case design
techniques.
In both cases, the intent is to find the maximum number of errors with the
minimum amount of effort and time.
2. Strategies
A strategy for software testing must accommodate low-level tests that are
necessary to verify that a small source code segment has been correctly
implemented as well as high-level tests that validate major system functions
against customer requirements. A strategy must provide guidance for the
practitioner and a set of milestones for the manager. Because the steps of the test
strategy occur at a time when deadline pressure begins to rise, progress must be
measurable and problems must surface as earl as possible.
108
Matrimonial Management
Following testing techniques are well known and the same strategy is adopted
during this project testing.
2.1 Unit testing: Unit testing focuses verification effort on the smallest unit of
software design- the software component or module. The unit test is white-box
oriented. The module interface is tested to ensure that information properly flows
into and of the program unit under test the local data structure has been examined
to ensure that data stored temporarily maintains its integrity during all steps in an
algorithms execution. Boundary conditions are tested to ensure that the module
operated properly at boundaries established to limit or restrict processing. All
independent paths through the control structure are exercised to ensure that all
statements in a module haven executed at least once.
2.2 Integration testing: Integration testing is a systematic technique for
constructing the program structure while at the same time conducting tests to
uncover errors associated with interfacing. The objective of this test is to take unit
tested components and build a program structure that has been dictated by design.
2.3 Validation testing: At the culmination of integration testing, software is
Matrimonial Management
References
References:
C# 2005 Apress.
www.w3schools.com
110