Sie sind auf Seite 1von 12

Commercial in Confidence

Release Notes

MX-ONE Telephony Server V.4.1

Aastra Telecom Sweden AB


SE-126 37 Hgersten, Sweden
www.aastra.com

ASE/MXO/TQ/ 0085 / EN

Product Introduction

ASE/MXO/TQ/ 0085 / EN

2010-05-12

Product Introduction

Contents
1

Introduction.............................................................................................
1.1
Installation, MX-ONE V.4.1........................................................
1.2
Verification.................................................................................
1.3
Content......................................................................................
1.4
Other.........................................................................................

Prerequisites.........................................................................................
2.1
Hardware...................................................................................
2.2
Software....................................................................................

Installation and upgrade.......................................................................


3.1
Actions......................................................................................

Re-initiation T1/E1 trunks.....................................................................


4.1
Actions......................................................................................
4.2
SLES 10 SP3 upgrade..............................................................
4.3
EPN must be removed before upgrade....................................

Good to know........................................................................................
5.1
HTTP/HTTPS Settings Verification for MTS..............................
5.2
IPLU in MGU Gateways............................................................
5.3
Rollback is not supported to V3.2..............................................
5.4
Access to MTS if authenfication is done by MP.........................
5.5
Add MediaGateway using Manager Telephony System.............
5.6
Parameter VARC D8 for TLP60...............................................

New and Changed End User Functions..............................................


6.1
Remote Programming of Follow-me..........................................
6.2
Message Waiting.......................................................................

New Hardware.......................................................................................
7.1
ASU-E Server Board.................................................................
7.2
New Phones..............................................................................

New and Changed Functionality..........................................................


8.1
Aastra Mobile Client 2.0............................................................
8.2
IP DECT Version 3....................................................................
8.3
Network Redundancy by Using Ethernet Bonding.....................
8.4
Software Change-Over During Upgrade....................................
8.5
DTMF Support in MGU Boards.................................................
8.6
QSIG over T1 Support in MGU Boards.....................................
8.7
Call Lists on Digital Phones.......................................................
8.8
Number Presentation for Group Members.................................
8.9
Extra Paging Number................................................................
8.10
External Call Control.................................................................
8.11
CAAPI Export in Manager Provisioning.....................................
8.12
Forward Switching.....................................................................
8.13
Diversion after Deflect...............................................................

Software.................................................................................................

10

Corrections............................................................................................

ASE/MXO/TQ/ 0085 / EN

2010-05-12

Product Introduction

1 Introduction
This document describes the release content and limitations of the MX-ONE release 4.1.

1.1

Installation, MX-ONE V.4.1


MX-ONE V.4.1 is intended for new customers, existing MX-ONE customers and TSW/MD110
migrating customers.

1.2

Verification

The MX-ONE V.4.1 Field Trial has been performed in Sweden, UK, Germany, France, Austria,
Netherlands, Belgium, Spain, Italy, Croatia, US, Finland and Saudi Arabia. It has included 15
sites in 13 countries.

1.3

Content

MX-ONE V.4.1 contains the following:

Telephony Server 4.1

Manager Telephony Server 4.1

Manager Provisioning 4.1

Manager Availability 3.1 SP1

Messaging Voice Mail 4.2 SP1

Messaging Fax Mail 4.2 SP1

Aastra Collaboration Link 1.0 SP2

PC-Regen 5.1 for MX-ONE

IP-DECT R3

Updated FW list

Updated Application list

Updated CPI

For details about news and new functionality, please read the document News MX-ONE
Version 4.1 19/109 21-ASP 113 01 Uen G1.

Other
A CPI library is available in the knowledge database.
Recovery DVDs will be delivered together with the MX-ONE V.4.1release when ordered
through the standard ordering process.

ASE/MXO/TQ/ 0085 / EN

2010-05-12

Product Introduction
A Media Kit for SW only customers is delivered with the MX-ONE V.4.1release when ordered
through the standard ordering process, LZY 203187/1

2 Prerequisites
Before the upgrade, please make sure that the system is stable and that you have read the
instruction in the CPI library thoroughly.

2.1

Hardware

The current MX-ONE Telephony Server HW is still supported, but system capacities can vary based
on the hardware type and some field upgrades may be necessary to existing HW components (e.g.
CPU memory, etc.).
For customers wishing to migrate from existing MD110 stackable and Telephony Switch installations,
the existing HW is supported, although there are some configuration rules that must be applied
based on the chassis type.
The hardware must comply with the R-STATE SURVEY 1317-ASP 113 01 Uen J3 in the CPI
documentation.
You will find the list under General, Replacing Hardware and Product List MX-ONE.

2.2

Software
SUSE Linux Enterprise Server 10 SP3 is required for this release.
Please be aware about procedure for SLES10 upgrades before the upgrade process is started. The
SLES 10 SP3 package is available for download at Service Support Plaza, Knowledge Base
An upgrading customer must secure that Java 1.5 is installed before using the ICT tool. Java 1.5
can be extracted from the recovery DVD.
It is strongly recommended to make a safety back-up before upgrade or migration as no automatic
roll-back is supported.

3 Installation and upgrade


Actions
Use PC-Regen 5.1 for MX-ONE to regenerate the data.
1. Existing MX-ONE V.3.2 and V.4.0 customers can upgrade without uninstall to minimize
downtime.
2. New and MX-ONE V.3.1 and prior customers shall use the recovery DVD.
3. Migrating MD110 and TSW customers should be considered as a new installation with new HW.

ASE/MXO/TQ/ 0085 / EN

2010-05-12

Product Introduction
Any reconfiguration of an upgrading or migrating system should be treated as a new installation.
PC-Regen only supports data generation to an identical system as the original.
Detailed description for each scenario is available in the CPI library.

4 Re-initiation T1/E1 trunks


When upgrading from MX-ONE V.4.0 versions following actions must be performed:
Interface changes have made it necessary to remove and reinitiate all T1 trunks. This applies for
TLU77, MGU, and EMG. Also, for the MGU board, as the E1 board identity will change, from 57
(TLU76) to 125 (PRI), when adding the service pack 1 software, all virtual trunk boards must be
removed. Then the MGU firmware should be updated. When the MGU FW is updated, the
Telephony System should be updated to 4.1. After this, a board scan shall be performed, and a reinitiation of the trunk boards be made.

4.1

Actions
1. Run board_list. Locate the board positions for all assigned trunks with Boardid 57 (E1)
and 71 (T1). For example, Boardpos 1A-1-00 is found with Boardid 57.
2. Run syedp:bpos=...; for the found board positions to find the Route and Trunk
identities.

For example, syedp:bpos=1A-1-00; could show ROU/TRU from 11/001-0001 to

11/001-0015.
3. End the trunk function for all individuals. Use the data from step 2.
Run roeqe:rou=, tru= ; Ex. roeqe:rou=11,tru=1-1&&1-15;
4. Remove all trunk boards on the MGU boards by removing the boards.
Run board_config -remove -bpos
5. Remove all T1trunk boards on the EMG.

Run board_config -remove -bpos


6. Remove all TLU77 boards in the Media Gateway Classic.

Run board_config -remove -bpos


7. For each MGU board, upgrade the firmware.
Run board_sw -gateway -netload -path -host
8. For each MGU board, activate the firmware.
Run board_sw -gateway activate
9. Make a board scan to detect the hardware.
Run board_config -scan
10. Reinitiate all the trunks. Use the data from step 2.
Run roeqi:rou=, tru= ;
ASE/MXO/TQ/ 0085 / EN

2010-05-12

Product Introduction

4.2

SLES 10 SP3 upgrade


Read the readme file on SLES10 SP3 DVD on how to set up an NFS server.
IMPORTANT:
The MX-ONE Telephony system will be out of order during the SLES SP3 upgrade, no
telephony traffic will be possible.
The system will be shutdown before the upgrade when the prepare_upgrade.sh script is
executed.
Update_instruction and prepare_upgrade.sh script is found in below folder in server node
folder:/home/eri_sn_admin/install_sw/prepare_sles_upgrade/

4.3

EPN must be removed before upgrade


Extra Paging Numbers must be ended before upgrade to MX-ONE 4.1. Re-Initiate EPN after
upgrade.

5 Good to know
5.1

HTTP/HTTPS Settings Verification for MTS

Service Advice HTTP/HTTPS Settings Verification for MTS (ASE/MXO/TQ/ 0087 / EN )


contains instructions on how to change between HTTP/HTTPS and how to verify the
configuration after Installation/upgrading and reconfiguration of the security settings in Manager
Telephony System (MTS).

5.2

IPLU in MGU Gateways


IPLU cannot co-exist with the MGU. But, as the MGU contains all IPLU functionality, there is no
need for IPLU-boards in an MGU Gateway.

5.3

Rollback is not supported to V3.2


Although it is possible to execute the upgrading script when upgrading a site from MX-ONE V3.2 to
MX-ONE V4.1, roll back is not supported.

5.4

Access to MTS if authenfication is done by MP


After upgrade access to MTS is not possible to log on if authentication is done by MP.
Workaround is to start eri_om manually.

5.5

Add MediaGateway using Manager Telephony System


MTS configuration wizard could be slow when adding a Mediagateway

ASE/MXO/TQ/ 0085 / EN

2010-05-12

Product Introduction

5.6

Parameter VARC D8 for TLP60


Parameter D8 in VARC for TLP60 could get wrong values when using PC-regen to generate
exchange data. For correct values for D8 read CPI documentation.

6 New and Changed End User Functions


6.1

Remote Programming of Follow-me

Using remote programming of follow-me , the diversion settings of an extension can be


programmed remotely, from another phone.

6.2

Message Waiting

The message waiting function has been extended with a new procedure, *32#. Using this
procedure, users that has a message waiting indication can listen to the message (reply to the
message) without having to know the phone number to the messaging center. The indication
will be removed when the message is collected.

7 New Hardware
7.1

ASU-E Server Board

A new server board for MX-ONE Lite and MX-ONE Classic, Aastra Server Unit, Embedded
(ASU-E), is available in MX-ONE V.4.1. The board replaces the ESU board.

7.2

New Phones

MX-ONE V.4.1 supports the following new Aastra phones:


Aastra 6730i
Aastra 6731i
Aastra 6739i

8 New and Changed Functionality


8.1

Aastra Mobile Client 2.0

Aastra Mobile Client is upgraded to version 2.0 in MX-ONE V.4.1.

8.2

IP DECT Version 3

MX-ONE V.4.1 provides an enhanced IP DECT solution, including, for example, Over-the-Air
configuration of handsets and support for multiple master base stations within a system.

8.3

Network Redundancy by Using Ethernet Bonding

MX-ONE V.4.1 supports network redundancy for servers by using Ethernet bonding. By using
Ethernet bonding, a Telephony Server is connected to two separate switches in a switched
network. Provided that the switched network is designed for redundancy, this provides network
redundancy to the Telephony Server. Ethernet bonding means that two Ethernet interfaces are
ASE/MXO/TQ/ 0085 / EN

2010-05-12

Product Introduction
aggregated to work together. If one of the interfaces stops functioning, the communication is
taken over by the other interface.

8.4

Software Change-Over During Upgrade

In MX-ONE V.4.1, a telephony server can be prepared with a new telephony server software
version in parallel with an existing, running software version. The new software remains
passive until activated. By using the software change-over function, the time during which a
telephony server is unavailable due to an upgrade can be shortened compared to previous
versions of MX-ONE. If required, a rollback to the previous software version can be performed.

8.5

DTMF Support in MGU Boards

MGU boards in MX-ONE V.4.1 support DTMF signalling. This means that media gateways
comprising an MGU board are able to handle DTMF signalling without the use of an SPU4
board.

8.6

QSIG over T1 Support in MGU Boards

In MX-ONE V.4.1, MGU boards support QSIG over T1 signalling.

8.7

Call Lists on Digital Phones

In MX-ONE V.4.1, digital phones can be configured for storing only unanswered calls in the
phones call list.

8.8

Number Presentation for Group Members

When a user that is associated to a group is called, either the users or the groups directory
number is returned to the calling part (provided that the calling part has dialed the users
directory number). Function is controlled by SERV parameter for Internal Group Hunting.

8.9

Extra Paging Number

MX-ONE V.4.1 provides enhanced capacity for extra paging numbers. Paging number are
directory numbers that are not associated to extensions but to paging receivers only.

8.10 External Call Control


As a part of the enhanced CSTA support in MX-ONE V.4.1, MX-ONE V.4.1 provides enhanced
support for call distribution using external applications.

8.11 CAAPI Export in Manager Provisioning


MX-ONE V.4.1 supports export of Call Accounting API (CAAPI) data using Manager
Provisioning.

8.12 Forward Switching


By permitting forward switching on a route, incoming calls are, if deflected, routed through the
server on where the called extension resides, independently of which server the calls are
ASE/MXO/TQ/ 0085 / EN

2010-05-12

Product Introduction
deflected to (forward switching). This means that the normal procedure of returning calls to the
sending server and then re-routing the call to the server on which the deflect-to answering
position resides is overridden.19/109 21-ASP 113 01 Uen G1 2010-04-30 12 12 New and Changed
Functionality.

8.13 Diversion after Deflect


In MX-ONE V.4.1, the allowance of diversion after deflect can be set on route level, implying
that the same setting is used for all calls using the route. This can be used, for example, for
routes that are connected to systems not providing diversion after deflect data

9 Software
The Following firmware, Applications and PRI's are available for download in this release:

Recovery DVD LZY203 186/1 R3A


Media kit MX-ONE V.4.1
SLES 10 SP3
Firmware and PRI list
Hardware and PRI list
Application and PRI list
CPI library for Telephony Server version V.4.1
NOTE: Because of legal issues and EU/US export restrictions, the recovery DVD's and the IPLF-SEC
FW must now be downloaded from a Partner restricted FTP server. Use the login account you have
received in a separate mail from Aastra Telecom in order to download the SP files as recovery DVD's,
Media kit, TS install, etc. All Partners have access to the Knowledge Base, but it is not all Partners that
have got approval to download the files on the FTP server. If you after login can't access the download
area for the recovery DVD's and other restricted files, then you are not supposed to have rights to
download the files. In order to get your download rights changed you must contact your Aastra Channel
Manager.
The recovery DVD can alternatively be ordered from the E-Shop.

ASE/MXO/TQ/ 0085 / EN

2010-05-12

Product Introduction

Actual Software for the other products:

MX-ONE / ASP 113


01/1

MX-ONE Telephony
System

MX-ONE Messaging

MX-ONE Manager
Availability
Aastra
Collaboration Link

MX-ONE

MX-ONE V.4.0

v4.0 SP0

SP1

4.0

4.0

4.2 SP1

3.1 SP1

1.0 SP1

EBN

6.0

Sec/Oas

6.0

Manager

4.0

Provisioning
PC-Regen for MX-

4.0

4.0
SP1

MX-ONE V.41

4.1

4.1

4.2

4.2

SP1

SP1

3.1

3.1

SP1

SP1

1.0

1.0

SP2

SP2

6.0

6.0

7.0

7.0

4.0

4.1

SP1
5.0

ONE

5.0

5.1

SP1

Note: MX-ONE Telephony System includes: Media Gateway, Telephony Server and Manager Telephony
System

10 Corrections
Solved customer trouble reports are listed at in document Slogan List for MX-ONE Telephony
Server V.4.1 (ASE/MXO/TQ/ 0086 / EN) published at Service Support Plaza, Knowledge Base.

ASE/MXO/TQ/ 0085 / EN

2010-05-12

Product Introduction
2010 Aastra Technologies Limited. All rights reserved.
This document contains proprietary information, which is protected by copyright.
No part of this document may be reproduced or transmitted in any form or by any
means, electronic or mechanical, including photocopying, recording, or by any
information storage and retrieval system, or translated into another language,
without prior written consent of Aastra Technologies Limited, Concord, Ontario, Canada.

NOTICE
The information in this document is subject to change without notice.
AASTRA MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS MATERIAL,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE. AASTRA shall not be liable for errors
contained herein nor for incidental or consequential damages in connection with the
furnishing, performance or use of this material.

Aastra Technologies Limited

Concord, Ontario, Canada.

ASE/MXO/TQ/ 0085 / EN

2010-05-12

Das könnte Ihnen auch gefallen