Beruflich Dokumente
Kultur Dokumente
COPY
1)Select the copy button, then select the object(s) to
copy then hit return (or right click)
2) Select the base point where to copy from (For
example if copying a circle, it would be sensible for the
base point to be the centre of the circle)
3)Enter the second point of displacement - this is
where the new base point of the copied objects is to be
positioned.
MULTIPLE COPY
Command: copy, ENTER
Select object, object found, ENTER
want.
MIRROR
The mirror command will create a mirror image of any
MIRROR
Command: mirror, ENTER
Select object: (click on the object you want to mirror)
1 object found: ENTER
Specify 1st point of mirror line: pick a point
Specify 2nd pt of mirror line: pick a point
Delete source object? [Yes/No]: N
ENTER
You can mirror your object anywhere you like.
Experiment.
OFFSET
ARRAY
There are 2 types of array which can be constructed:
Polar, constructed around a centre
POLAR ARRAY
Firstly, draw 2 circles & polygon.
Circle 1: Centrepoint 100,100; Diameter 100
Radius 20
POLAR ARRAY
Now, call the array tool.
Command: array (or ar), ENTER
POLAR ARRAY
Enter 10 in the Total number of item field.
Enter 360 in the Angle to fill field.
Click on Center point box. The dialog will go away again.
RECTANGULAR ARRAY
SCALE
Draw the following object:
Circle 1: Centre point 100,100; Diameter 40
SCALE
Command: scale, ENTER
Select object: 13 found, ENTER
FILLET
Construct any object using Line command.
Call the fillet tool. Or type fillet, ENTER
CHAMFER
Construct a rectangular using Line command.
Call the chamfer tool.
Trim