Beruflich Dokumente
Kultur Dokumente
Instructions:
1) Every student has to complete and check it to respective teacher before Date of
completion.
2) During each lecture, student should write important points of the lecture (such as
brief notes, equations, sketches, etc). Many lectures have numerical which may be
partially solved in the class. These problems should be completed before the next
class. Sometimes, additional problems will be given during the class and those also
should be completed before the next lecture.
3) If you miss the lectures for medical reason, submit the doctor certificate to Head of
department and keep the zerox with you till the end of the semester.
4) The lecture notes will be randomly evaluated by myself without any prior notice.
5) Student should start writing tutorial with keeping first page question set zerox
sheet.
Evaluation
Mid Sem. Exam-Module-1
30
MARKS
25
Presence in lecture. + Lecture Notes preparation
Timely Tutorial preparation
25
DISTRIBUTION
Total
80
This year syllabus is changed and as per given syllabus the marks distribution as
follows
Chapter Number
Subject
Tentative Marks
Chapter wise
Total
1
8 TO 10
2
10 TO 12
35
RAILWAY ENGINEERING
3
10 TO 12
4
7 TO 10
5
BRIDGE ENGINEERING
20 TO 25
20
6
TUNNEL ENGINEERING
15 TO 20
15
In light of GTU paper style and for better understanding it is required to understand
the component parts by drawing sketch so the arrangement may be visualize in
correct manner. In the same line of action our tutorial is divided in two parts question
answer and drawing parts.
Note:
Each tutorial is divides in two parts
PART A- QUESTION ANSWER
Department of Civil Engineering- Assignment for Railway, Bridge and Tunnel Engg, Sem-VI-Civil
Engg
Page 1
Draw the below listed sketch showing all component parts, dimension with
suitable scale ( some sketch no need of scale) sketch should be proportionate.
Q-1
Q-2
Q-3
Q-4
Q-5
Q-6
Q-7
Q-8
Draw detailed sketch showing section of a B.G. track for double line with electric
traction.
Loading gauge on B.G Track
Cross section of Permanent way as per IRS
Conning of wheels
Standard flat footed rail
(i) Adzing of sleeper (ii) PCS 12 sleeper (III) CST-9 SLEEPER
Fish plate
Pandrol clip
Department of Civil Engineering- Assignment for Railway, Bridge and Tunnel Engg, Sem-VI-Civil
Engg
Page 2
1,2,3
4,5,6
7,8,9
10,11,12
13,14.
15,16,17,
18,19,20
21,22,23
24,25,26
27,28,29
30,31,32
33,34,35
13
14
15
36,37,38
39,40,41
42,43,44
Classification of Bridge
Constn. Methods of Bridge
Maintenance of Bridge
16
45,46,47
Tunnel
Department of Civil Engineering- Assignment for Railway, Bridge and Tunnel Engg, Sem-VI-Civil
Engg
Page 3
( Home work)
Q.1) What is Gauge, draw neat sketch. Give various Gauges of the world
railways.
Q.2) Enlist Gauges adopted by Indian railways. It, s total length & %
Q.3) Problems of change of track.
Q.5) Benefits of unigauge track.
Q.6) Explain with neat sketch loading Gauge ? How it is different from the
construction gauge.
Tutorial No. II
work)
Department of Civil Engineering- Assignment for Railway, Bridge and Tunnel Engg, Sem-VI-Civil
Engg
Page 4
6. BALLAST
Department of Civil Engineering- Assignment for Railway, Bridge and Tunnel Engg, Sem-VI-Civil
Engg
Page 5
Tutorial No. IX
10.
1) Define following:
(i) Turn out- with sketch
(ii) Tongue rail
(iii) Switch angle
(iv) TNC & ANC
2) Explain following with neat sketch.
(1) Cross over
(2) Diamond crossing
(3)Gauntleted track
(4)Slips
(5)Scissors cross-over
Tutorial No. XI
Department of Civil Engineering- Assignment for Railway, Bridge and Tunnel Engg, Sem-VI-Civil
Engg
Page 6
Department of Civil Engineering- Assignment for Railway, Bridge and Tunnel Engg, Sem-VI-Civil
Engg
Page 7