Beruflich Dokumente
Kultur Dokumente
KPI Class
Network KPI
Accessibility
Accessibility
Retainability
Formula :
- Success : RRC CONNECTION RECONFIGURATION COMPLETE message sent by the UE.
- Total : an attempt is the sending of RRC CONNECTION REQUEST with appropriate establishment cause by the UE.
Test Procedure
1. Set the FMT to generate calls to the FTP Server automatically with the following script/sequence:
a. Connection attempt
b. Log into the FTP Server
c. FTP Download of 1 GB file for 15 sec
d. Stop download (connection release)
e. Leave 15 sec before starting the next session
f. Repeat all previous steps (from a)
2. Start drive test and continue driving until drive route is completed.
3. Verify the Packet Data Call Setup Success Rate
Formula :
- Success : ALERTING MESSAGE message received by the UE in UTRAN networks.
- Total : an attempt is the sending of EXTENDED SERVICE REQUEST with appropriate establishment cause by the UE in
LTE networks.
Test Procedure
1. Set the FMT to generate calls to test call number (i.e. 199) automatically with the following script/sequence:
a. CS call attempt to 199
b. CS call for 5 sec
c. Terminate CS call from UE (connection release)
d. Leave 30 sec before starting the next session and ensure UE already reselects back to LTE make sure already in LTE
e. Repeat CS call attempt (from a)
2. Start drive test and continue driving until drive route is completed.
3. Verify the CSFB Call Setup Success Ratio.
Formula :
- Success: submission of the message RRC CONNECTION RECONFIGURATION COMPLETE by the UE, see
[3GPP36.331]
- Drop: successful establishments minus terminations by the user, i.e. the UE submitting a L3 DETACH REQUEST
(see [3GPP24.008]) carried within the RRC message UL NAS TRANSPORT (refer to [3GPP36.331]).
For the calculation of a network initiated EPS bearer drop rate, ePC initiated L3 DETACH REQUEST-s are to be
considered.
Test Procedure
1. Set the FMT to generate calls to the FTP Server automatically with the following script/sequence:
a. Connection attempt
b. Log into the FTP Server
c. FTP Download of 1 GB file for 15 sec
d. Stop download (connection release)
e. Leave 15 sec before starting the next session
f. Repeat all previous steps (from a)
2. Start drive test and continue driving until drive route is completed.
3. Verify the Packet Data Call Drop Rate