Beruflich Dokumente
Kultur Dokumente
Solutions Guide
(2/15)
Outdoor Drop
Indoor Distribution
Premise Drop
4
4
Closures
Empty Closures
Optical Taps
Above Ground - Optical Taps
Splitter Modules
Fiber Adapters
Premise Accessories
Faceplates
10
Surface-Mount Boxes
10
10
Premise CPE
MicroNodes
11
Battery Backup
11
11
Broadband Products
Selection of an appropriate FTTx cable requires a review of design parameters, future growth needs, mapping layout and history. If this FTTx network
will be a transition from HFC, products like CommScopes E2O HFC transition cable can help. If space is tight, microducts and jetted microcable can
provide maximum capacity in a small space. If future needs arent known, additional microducts in CIC can be used to ease future construction.
Drop and premise applications require flexible low count cables with easy termination features. They also must be robust for the environment.
CommScope offers a variety of cables for outdoor, aerial, underground, conduit and premise installation challenges. In MDU or commercial
environments, CommScope premise distribution cables are available in riser, plenum and LSZH versions to satisfy local code requirements.
For more information on any of CommScopes cabling products, visit www.commscope.com
COMMSCOPE MODEL #
DESCRIPTION
COMMSCOPE MODEL #
DESCRIPTION
D-024-LA-8W-F12NS
B-012-LN-8W-F12NS/16G
D-048-LA-8W-F12NS
B-024-LN-8W-F12NS/16G
D-072-LA-8W-F12NS
D-096-LA-8W-F12NS
B-036-LN-8W-F12NS/16G
D-144-LA-8W-F12NS
B-048-LN-8W-F12NS/16G
D-288-LA-8W-F12NS
D-024-LN-8W-F12NS
B-072-LN-8W-F12NS/16G
D-048-LN-8W-F12NS
B-096-LN-8W-F12NS/16G
D-072-LN-8W-F12NS
B-144-LN-8W-F12NS/16G
D-096-LN-8W-F12NS
D-144-LN-8W-F12NS
E2O-12.7MB
E20.16MT
D-288-LN-8W-F12NS
Broadband Products
Outdoor Drop
DF-Flat Drop
DA-Drop Armored
MN/109-Self Support
E206VMXP-2
COMMSCOPE MODEL #
DESCRIPTION
O-001-DF-8G-F01NS/LC
1 CT, Low Count Flat Drop, Self-Supporting All-Dielectric Outdoor Drop Cable, Arid Core construction
O-002-DF-8G-F02NS/LC
2 CT, Low Count Flat Drop, Self-Supporting All-Dielectric Outdoor Drop Cable, 1-2 Fiber Arid Core construction
O-002-DF-8W-F02NS
2 CT, Self-Supporting All-Dielectric Outdoor Flat Drop Cable, Arid Core construction, central loose tube
O-004-DF-8W-F04NS
4 CT, Self-Supporting All-Dielectric Outdoor Flat Drop Cable, Arid Core construction, central loose tube
O-006-DF-8W-F06NS
6 CT, Self-Supporting All-Dielectric Outdoor Flat Drop Cable, Arid Core construction, central loose tube
O-012-DF-8W-F12NS
12 CT, Self-Supporting All-Dielectric Outdoor Flat Drop Cable, Arid Core construction, central loose tube
O-002-DF-HY-F02NS/8W002/1X24AWG
2 CT, Fiber + Tone Wire Outdoor Flat Drop Cable, Arid Core construction, central loose tube
O-004-DF-HY-F04NS/8W004/1X24AWG
4 CT, Fiber + Tone Wire Outdoor Flat Drop Cable, Arid Core construction, central loose tube
O-006-DF-HY-F06NS/8W006/1X24AWG
6 CT, Fiber + Tone Wire Outdoor Flat Drop Cable, Arid Core construction, central loose tube
O-012-DF-HY-F12NS/8W012/1X24AWG
12 CT, Fiber + Tone Wire Outdoor Flat Drop Cable, Arid Core construction, central loose tube
O-002-DA-8W-F02NS
2 CT, Single Jacket Single Armor Outdoor Drop Cable, Arid Core construction, central loose tube
O-004-DA-8W-F04NS
4 CT, Single Jacket Single Armor Outdoor Drop Cable, Arid Core construction, central loose tube
O-006-DA-8W-F06NS
6 CT, Single Jacket Single Armor Outdoor Drop Cable, Arid Core construction, central loose tube
O-012-DA-8W-F12NS
12 CT, Single Jacket Single Armor Outdoor Drop Cable, Arid Core construction, central loose tube
M-001-MN-8W-F01NS/109
1 CT, Self-Supporting Non-Armored Figure-8 Outdoor Drop Cable, Arid Core construction with 0.109 in messenger, central loose tube
M-002-MN-8W-F02NS/109
2 CT, Self-Supporting Non-Armored Figure-8 Outdoor Drop Cable, Arid Core construction with 0.109 in messenger, central loose tube
M-006-MN-8W-F06NS/109
6 CT, Self-Supporting Non-Armored Figure-8 Outdoor Drop Cable, Arid Core construction with 0.109 in messenger, central loose tube
E2O6EFXP-2
Underground - Series 677 XP, Black PE jacket with Migraheal Floodant with a yellow tracer and 2 (two) G.657A2 Bend
Insensitive Single Mode fibers and 2 Aramid Fibers
E2O6VMXP-2
Aerial Series 677 XP, Black PVC jacket, 0.072 messenger with yellow tracer and 2 (two) Bend Insensitive Single Mode fibers
and 2 Aramid Fibers
Indoor Distribution
COMMSCOPE MODEL #
DESCRIPTION
R-002-DS-8W-FSUYL
R-006-DS-8W-FSUYL
R-012-DS-8W-FSUYL
R-024-DS-8W-FSUYL
Premise Drop
COMMSCOPE MODEL #
DESCRIPTION
Z-002-LN-8W-F02BK/20G
Indoor/Outdoor, Mini Single Jacket, All-Dielectric, Low Smoke Zero Halogen (LSZH), Riser-Rated, Gel-Filled, Stranded Loose Tube
Cable, 2-fiber
P-002-DS-8W-FSUYL
R-002-DS-8W-FSUYL
N-002-DS-8W-FSUYL
E2O6CMRXP-2
Indoor Riser - Series 677 XP, Black Riser FR PVC jacket with yellow tracer and 2 (two) G.657A2 Bend Insensitive Single Mode
Fibers and 2 Aramid Fibers
Broadband Products
Many communication providers are not building a new or greenfield area, but rather transitioning an existing HFC build to FTTx in stages. CommScope
E2O products address this unique challenge by bringing together fiber optic, coaxial and duct solutions into one customizable package. Are you
preparing for a future FTTx build? Do you have unclear future growth needs? Do you require coax plant for video short term? E2O will help solve all
these issues.
DESCRIPTION
E2O625JCASS-12.7MB DUCT
E2O625JCA-12.7MB DUCT
E2O715JCASS-12.7MB DUCT
E2O715JCA-12.7M
E2O QR 715 JCASS Coaxial/24 CT MicroFiber/12.7MM Microduct Hybrid for Burial Applications
DESCRIPTION
E2O150T135625JCASS-12.7MB
E2O 1 1/2 SDR 13.5 Conduit with pre-installed P3 625 JCASS and 12.7MM Microduct
E2O150T135715JCASS-12.7MB DUCT
E2O 1 1/2 SDR 13.5 Conduit with pre-installed QR 715 JCASS and 12.7MM Microduct
E2O200T135875JCASS-12.7MB
E2O 2 SDR 13.5 Conduit with pre-installed P3 875 JCASS and 12.7MM Microduct
E2O200T135625JCASS-16MT-12.7MB-TW
E2O 2 SDR 13.5 Conduit with pre-installed P3 625 JCASS,16MM Microduct, 12.7MM Microduct, and Copper Clad
Steel Tonewire
E2O200T135875JCASS-16MT-12.7MB-TW
E2O 2 SDR 13.5 Conduit with pre-installed P3 875 JCASS,16MM Microduct, 12.7MM Microduct, and Copper Clad
Steel Tonewire
Broadband Products
Closures
CommScope offers a variety of splice and tap/split closures to meet every need. From low count to high count, our closures offer unique and
cost-effective performance in aerial and underground applications. We also offer unique and low profile solutions for residence demarcation.
CommScopes BOS distributed tap architecture, unique in the industry, is fully supported by our underground and aerial tap closures. Distributed tap is
a PON and RFoG friendly architecture that closely mimics HFC designs, and is low-cost utilizing far fewer fibers than centralized or distributed split.
Empty Closures
COMMSCOPE MODEL #
DESCRIPTION
OFE-CLS-L-024
OFE-CLS-K-024
OFE-CLS-J-012
BOS-ACC-ND-2-002
BP-TAP-2000-ENCL
BP-NID-2000
BP-NID-2000-KIT-AR
BOS-ENC-BG-2000
BOS-SPT-24-60-1
BOS-ENC-N-3-007
BOS-ENC-N-1-006
Broadband Products
Optical Taps
CommScopes BOS distibuted tap architecture, unique in the industry, is fully supported by our underground and aerial tap closures. Distrubuted tap is
a PON and RFoG friendly architecture that closely mimics HFC designs, and is low-cost utilizing far fewer fibers than centralized or distributed split.
The distributed tap architecture is similar to RF HFC designs in application. Your designers will be very comfortable with the layout and concept of
tapping off a small amount of optical power at each drop point as needed, and the low fiber count requirement makes even rural areas ROI look
attractive! CommScopes tap closures offer full closure and terminal functionality as well as industry leading optical performance.
COMMSCOPE MODEL #
DESCRIPTION
COMMSCOPE MODEL #
DESCRIPTION
BP-TAP-2000-2P-10
BOS-TAP-BG-2P-10
BP-TAP-2000-2P-12
BOS-TAP-BG-2P-12
BP-TAP-2000-2P-14
BOS-TAP-BG-2P-14
BP-TAP-2000-2P-15
BOS-TAP-BG-2P-15
BP-TAP-2000-2P-17
BOS-TAP-BG-2P-17
BP-TAP-2000-2P-19
BOS-TAP-BG-2P-19
BP-TAP-2000-2P-21
BOS-TAP-BG-2P-21
BP-TAP-2000-2P-4T
BOS-TAP-BG-2P-4T
BP-TAP-2000-2P-5
BOS-TAP-BG-2P-5
BP-TAP-2000-2P-7
BOS-TAP-BG-2P-7
BP-TAP-2000-2P-8
BOS-TAP-BG-2P-8
BP-TAP-2000-4P-10
BOS-TAP-BG-4P-10
BP-TAP-2000-4P-11
BOS-TAP-BG-4P-11
BP-TAP-2000-4P-13
BOS-TAP-BG-4P-13
BP-TAP-2000-4P-15
BOS-TAP-BG-4P-15
BP-TAP-2000-4P-17
BOS-TAP-BG-4P-17
BP-TAP-2000-4P-19
BOS-TAP-BG-4P-19
BP-TAP-2000-4P-21
BOS-TAP-BG-4P-21
BP-TAP-2000-4P-7T
BOS-TAP-BG-4P-7T
BP-TAP-2000-4P-9
BOS-TAP-BG-4P-9
BP-TAP-2000-8P-11T
BOS-TAP-BG-8P-11T
BP-TAP-2000-8P-12
BOS-TAP-BG-8P-12
BP-TAP-2000-8P-14
BOS-TAP-BG-8P-14
BP-TAP-2000-8P-15
BOS-TAP-BG-8P-15
BP-TAP-2000-8P-17
BOS-TAP-BG-8P-17
BP-TAP-2000-8P-19
BOS-TAP-BG-8P-19
BP-TAP-2000-8P-21
BOS-TAP-BG-8P-21
Broadband Products
CommScope has a full line of 19 inch rack mountable shelves, bulkheads and splitter/WDM modules. In higher density applications LCAPC connectivity
is available. LCAPC SCAPC jumpers are additionally available to ease conversion where required. All performance specifications are available at
www.commscope.com
DESCRIPTION
BOS-WD-00303-1
Single LGX Module Wavelength Division Multiplexer, 1550/1610/1490/1310 nm Wavelength, SC/APC Connector
BOS-WD-00202-2
Dual LGX Module Wavelength Division Multiplexer, 1550/1610 nm Wavelength, SC/APC Connector
BOS-WD-00201-2
Dual LGX Module Wavelength Division Multiplexer, 1550 (1310/1490) nm Wavelength, SC/APC Connector
Splitter Modules
COMMSCOPE MODEL #
DESCRIPTION
COMMSCOPE MODEL #
DESCRIPTION
BOS-SP-10008
BOS-SP-14008
BOS-SP-15002
BOS-SP-10016
BOS-SP-16002
BOS-SP-14016
BOS-SP-15004
BOS-SP-10032
BOS-SP-16004
BOS-SP-14032
BOS-SP-11004
BOS-SP-12004
COMMSCOPE MODEL #
DESCRIPTION
RFE-SLC-IS-EMT-BK/1U-PNL
RFE-SLC-IS-EMT-BK/2U-PNL
RFE-SLC-IS-EMT-BK/4U-PNL
BOS-SP-11008
BOS-SP-12008
BOS-SP-11016
BOS-SP-12016
BOS-SP-11032
BOS-SP-12032
DESCRIPTION
WBE-EMT-BK/1P-PNL
WBE-EMT-BK/2P-PNL
WBE-EMT-BK/4P-PNL
WBE-EMT-BK/8P-PNL
Broadband Products
Fiber Adapters
COMMSCOPE MODEL #
DESCRIPTION
AFA-SC01-GR-FLANGELESS
AFA-LC02-GR/LP-SHUTTERED
AFA-LC02-GR/LP
AFA-LC02-GR/LP-50 Bulk-Pack-Shuttered
AFA-LC02-GR/LP-50-Bulk-Pack
DESCRIPTION
FDWSASA21-JXF005
TeraSPEED SCAPC to SCAPC, FiberPatch Cord, 1.6 mm Simplex, Plenum, yellow jacket, 5 ft. (1.5 m)
FEWSASA21-JXF005
TeraSPEED SCAPC to SCAPC, Fiber Patch Cord, 1.6 mm Simplex, Riser, yellow jacket, 5 ft. (1.5 m)
DESCRIPTION
SFC-SCF-09-8A-25-PACK
SFC-LCF-09-8A-25-PACK
QK-TERM-TOOL-KIT-QWIK II
Broadband Products
Premise Accessories
CommScope offers a broad array of premise connectivity accessories, including wall plates, surface mount boxes, adaptors, connectors and patchcords.
These accessories are available in a variety of colors and configurations. For additional information and selection, please visit www.commscope.com
Faceplates
Surface-Mount Boxes
COMMSCOPE MODEL #
DESCRIPTION
COMMSCOPE MODEL #
DESCRIPTION
M14MMO-xxx
M112SMB--xxx
M12LE-xxx
M106SMB-xxx
M12SP
M204SMB-xxx
M12SP-L
M202SMB-xxx
10
COMMSCOPE MODEL #
DESCRIPTION
UNFA-EMM-SC01/LC02-BL-PACK-25
M Series Mounting Module f/LC Duplex adapter, bulk pack of 25, Blue
UNFA-EMM-SC01/LC02-OR-PACK-25
M Series Mounting Module f/LC Duplex adapter, bulk pack of 25, Orange
UNFA-EMM-SC01/LC02-RD-PACK-25
M Series Mounting Module f/LC Duplex adapter, bulk pack of 25, Red
UNFA-EMM-SC01/LC02-YL-PACK-25
M Series Mounting Module f/LC Duplex adapter, bulk pack of 25, Yellow
UNFA-EMM-SC01/LC02-BK-PACK-25
M Series Mounting Module f/LC Duplex adapter, bulk pack of 25, Black
UNFA-EMM-SC01/LC02-GY-PACK-25
M Series Mounting Module f/LC Duplex adapter, bulk pack of 25, Grey
UNFA-EMM-SC01/LC02-IV-PACK-25
M Series Mounting Module f/LC Duplex adapter, bulk pack of 25, Ivory
UNFA-EMM-SC01/LC02-WH-PACK-25
M Series Mounting Module f/LC Duplex adapter, bulk pack of 25, White
SMBFG
Broadband Products
Premise CPE
FTTx networks are expected to support a variety of protocols, and CommScope has developed a series of CPE devices to meet each of those needs.
CommScope was one of the earliest companies to offer RFoG, and now leads the industry in availability of 10G EPON. For commercial, residential or
MDU applications, CommScope offers complete PON or RFoG solutions.
MicroNodes
COMMSCOPE MODEL #
DESCRIPTION
BOS-PS-11-12P-0500-10
BOS-MN-1602
BOS-MN-1612
BOS-MN-2602
BOS-MN-3602
BOS-MN-3612
Battery Backup
COMMSCOPE MODEL #
DESCRIPTION
BOS-BB-1000
DESCRIPTION
CS-8001
CS-8004
CS-6204
EPON Gateway ONU, 4xFE Ports, Two FXS Ports, Wi-Fi 802.11 b/g/n
CS-9004A
CS-9014A
CM-8008
CM-8016
CM-8024A
C1004
C1004W
UM-SFPA
UM-EXFPA
10G/10G Symmetric EPON ONU XFP Transceiver Module for CM-8008/16/24 ONUs
10G/10G Asymmetric EPON ONU XFP Transceiver Module for CM-8008/16/24 ONUs
UM-10GCA
PA-5
PA-12
*CommScope has 2 complete lines of EPON and GPON products. Contact your sales representative for more information
11
www.commscope.com
Visit our Web site or contact your local CommScope representative for more information.
2015 CommScope, Inc. All rights reserved.
All trademarks identified by or are registered trademarks or trademarks, respectively, of CommScope.
This document is for planning purposes only and is not intended to modify or supplement any specifications or warranties relating to
CommScope products or services.
CO-108716.1-EN (2/15)