Beruflich Dokumente
Kultur Dokumente
,X
o
u
L
s
n
m
ie
S
Software
System
Installation of SOMARIS/5 VB38/VB39
10165977
10165888
10046789
10046766
Siemens, 2012
All documents may only be used for rendering
services on Siemens Healthcare Products. Any
document in electronic form may be printed
once. Copy and distribution of electronic documents and hardcopies is prohibited. Offenders
will be liable for damages. All other rights are reserved.
Print No.:
Replaces:
CT02-025.816.04.10.02
CT02-025.816.04.09.02
English
Doc. Gen. Date: 05.13
SSME CS
n.a.
2012
Copyright
Siemens, 2012 refers to the copyright of a Siemens entity such as Siemens Aktiengesellschaft - Germany, Siemens Shenzhen Magnetic Resonance Ltd. - China, Siemens
Shanghai Medical Equipment Ltd. - China, Siemens Medical Solutions USA Inc. - USA,
Siemens Healthcare Diagnostics Inc. - USA and/or Siemens Healthcare Diagnostics Products GmbH - Germany.
Document Version
Siemens reserves the right to change its products and services at any time.
In addition, manuals are subject to change without notice. The hardcopy documents correspond to the version at the time of system delivery and/or printout. Versions to hardcopy
documentation are not automatically distributed. Please contact your local Siemens office
to order current version or refer to our website http://www.healthcare.siemens.com.
Disclaimer
Siemens provides this documentation as is without the assumption of any liability under
any theory of law.
The installation and service of equipment described herein requires superior understanding of our equipment and may only be performed by qualified personnel who are specially
trained for such installation and/or service.
CT02-025.816.04.10.02
05.13
Page 2 of 58
SSME CS
Siemens, 2012
Table of Contents
0Table of Contents
10
10
10
10
12
12
12
12
13
Preparations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Backup Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
CD Write Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Creating Backup Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
17
17
17
18
Siemens, 2012
CT02-025.816.04.10.02
05.13
Page 3 of 58
SSME CS
31
31
31
31
31
32
33
35
35
36
Table of Contents
45
45
45
45
CT02-025.816.04.10.02
05.13
Page 4 of 58
SSME CS
Siemens, 2012
General
1-
1General
Abbreviations
Definitions
ACR-NEMA
BIOS
AET
CD
Compact Disk
CDR
CT
Computed Tomography
DICOM
DHCP
DNS
Domain Name Services - address resolution procedure that associates numeric IP addresses with Internet-style names
FTP
Gateway
ICS
IES
IMS
IRS
LAN
LMHOSTS
MEP
MOD
Magneto-Optical Disk
Siemens, 2012
CT02-025.816.04.10.02
05.13
Page 5 of 58
SSME CS
General
Abbreviations
Definitions
NetBIOS
NIC
NT
OI
Operating Instructions
PB
Patient Browser
PPP
RAS
Router
SCU
SCP
TCP/IP
UI
User Interface
USC
WINS
XP
CT02-025.816.04.10.02
05.13
Page 6 of 58
SSME CS
Siemens, 2012
General
Safety Information
1.1
Only qualified and trained personnel are allowed to perform CT system installation, service,
maintenance, and quality assurance.
To avoid risk of injury to personnel or damage to the system, the safety instructions must
be read and observed as described in the
General Safety Notes (TD00-000.860.01.xx.xx)
and
Product-specific safety notes (CT02-025.860.02.xx.xx) (CT02-025.860.02 / Product-specific safety notes)
The product-specific safety notes contain important information about:
General safety information about the gantry, patient table, and laser products.
Attachment of screws and nuts, adjustment instructions for torque wrench, and the use
of Loctite.
Vsim only
NOTE
NOTE
NOTE
Siemens, 2012
CT02-025.816.04.10.02
05.13
Page 7 of 58
SSME CS
General
NOTE
CT02-025.816.04.10.02
05.13
Page 8 of 58
SSME CS
Siemens, 2012
General
Overview
1.2
NOTE
Siemens, 2012
The IES runs only when the ICS is switched on. If the ICS is
switched off, the shared database cannot be accessed.
CT02-025.816.04.10.02
05.13
Page 9 of 58
SSME CS
10
General
1.3
Software Kit VB38 for ICS Tower 8B, IRS, and IES
The software installation kit for SOMATOM Emotion (2007) systems is included in the
delivery volume and comprises the following items required for a complete SW installation:
-
- CD_ICS_IES_VB38B_SP1 (used for VB38B SP1 & VB38B SP3 software version)
- CD_ICS_IES_VB38B_SP3 (used for VB38B SP3 software version)
Software Kit VB39 for ICS Tower 8B, IRS, and IES
The software installation kit for SOMATOM Emotion (2007) systems is included in the
delivery volume and comprises the following items required for a complete SW installation:
-
- or 1x Som/5_IRS_VB39_V1.0_64
Software Kit VB38 SP2 for ICS Tower 9B/9B2, IRS, and IES
The software installation kit for SOMATOM Emotion (2007) systems is included in the
delivery volume and comprises the following items required for a complete SW installation:
-
CT02-025.816.04.10.02
05.13
Page 10 of 58
SSME CS
Siemens, 2012
General
11
Siemens, 2012
1.4
CT02-025.816.04.10.02
05.13
Page 11 of 58
SSME CS
12
General
1.5
For installing the software, the following data should always be available:
Service Key
From the syngo user interface, select Options -> Local Service.
Write down the service key.
Service key = 20 characters
ICS
IES 1
IES 2
14 characters
last 6 characters
Host Name
Computer name
IES 1
Computer name
IES 2
Computer name
Regional Settings
From the syngo user interface, select -> Options -> Configuration.
In the configuration panel, double-click the Regional and Language Options icon.
Write down the following data:
Regional Options
Language
Customized
Time
Time separator:
Date
Date separator:
Languages
->details
Input language
CT02-025.816.04.10.02
05.13
Page 12 of 58
SSME CS
Siemens, 2012
General
13
In case a backup file becomes corrupted, it is useful to have the system configuration and
the license file available. For this reason, you have to save these files.
Siemens, 2012
CT02-025.816.04.10.02
05.13
Page 13 of 58
SSME CS
14
General
Preparations
1.6
NOTE
NOTE
CT02-025.816.04.10.02
05.13
Page 14 of 58
SSME CS
Siemens, 2012
General
15
Backup Information
NOTE
1.7
Make sure that up-to-date backups of the system are always available.
The CD-Writer (drive [-R-] CD-R) is the standard backup device for the ICS and IES. Alternatively, the MOD may be used, if available.
Make sure a separate backup medium (e.g. "CD Recordable") is on hand for both the
ICS and the IES (if available).
CD Write Check
During previous installations, we've experienced problems writing the backup files to CD.
As a result, this check has to be executed before starting the installation.
Siemens, 2012
CT02-025.816.04.10.02
05.13
Page 15 of 58
SSME CS
16
General
Open Local Service Home Menu and go to Configuration > DICOM > Offline Devices
Check offline device.
Depending on the offline device installed, select either CD-R or CD/DVD Combo
as an offline device in the drop down menu
Check the item: Default device, click Save, and then restart.
Fig. 1:
CD Write Check
If possible, you should generate new backup files before installing the software.
Start the service software and select the Backup & Restore function in the main menu.
Insert the backup CD-R.
From Command, select Backup.
From Drives, select the CD drive, e.g., [-R-] CD-R.
From Packages, select Security-Settings-PXXX and click Go.
BackupRestore Running ... Wait until Ready is displayed.
CT02-025.816.04.10.02
05.13
Page 16 of 58
SSME CS
Siemens, 2012
SW Installation ICS
17
2-
Preparations
NOTE
If you dont have a current backup, create one now, if possible. Refer to chapter 1 "Creating backup files".
NOTE
BHC adaptation
Under HKEY_LOCAL_MACHINE\SOFTWARE\Siemens\SOMARIS\Config\Site\Masme\BHC_130KV.
Under HKEY_LOCAL_MACHINE\SOFTWARE\Siemens\SOMARIS\Config\Site\Masme\BHC_80KV.
To perform the SW installation of the ICS, the following data media are required:
NOTE
Siemens, 2012
CT02-025.816.04.10.02
05.13
Page 17 of 58
SSME CS
18
SW Installation ICS
CD_ICS_IES_VB38B_SP1 (used for VB38B SP1 & VB38B SP3 software version)
CD_ICS_IES_VB38B_SP3 (used for VB38B SP3 software version)
Backup CD-R
NOTE
NOTE
Unplug the network cable between the ICS and the Ethernet
switch. After the software installation, plug in the cable
again.
Name
Identifier for
backup files
Material No.
Serial no.
P15F
101 65 888
xxx
P15F
100 46 766
xxx
101 65 977
xxx
100 46 789
xxx
CT02-025.816.04.10.02
05.13
Page 18 of 58
SSME CS
Siemens, 2012
SW Installation ICS
19
2.1
A pop up message Please remove the CTBaRe CD, insert... displays, insert the first
recovery DVD and wait for the Ready of the drive, then click OK.
System is restoring from the DVD.
Insert the 2nd recovery DVD when you are asked for it. Proceed according to the
prompted instructions and then click OK.
When the recovery process is finished, please remove the DVD and press OK to reboot
the system.
After the system restarted, one popup window as shown below appears. Check if the
MOD is plugged into the ICS or not. Press Yes if a MOD is plugged in, press No if no
MOD is plugged in.
Fig. 2:
NOTE
During the processing of the system, do NOT reboot the system when prompted for "System settings Change".
NOTE
Completion of the ICS installation (approx. 25 minutes) is indicated by a pop-up window with the message Please enter license.
Click Click here to start the Local Service Configuration to start the service software
(complete service license required).
Continue the installtion by jumping to VB38B SP1 and SP3 Installation.(VB38B SP1
and SP3 Installation / p. 27)
Siemens, 2012
CT02-025.816.04.10.02
05.13
Page 19 of 58
SSME CS
20
SW Installation ICS
2.2
From the IES, shut down the application and switch off the system.
Insert the OEMsetup_1 English VB38(or VB39A) CD 1 of 5 in the ICS.
From the ICS, select System/End and shut down the system.
Switch off the system at the UPS.
Disconnect the network cable of the ICS from the Ethernet switch.
Fig. 3:
Please note that the computer name must not contain blanks
or underscores. Use the following naming convention for the
ICS computer name: ct<serial
number>
(e.g.
ct123456).
Select Keep data on second harddrive or select Clear data on second harddrive
(deletes patient database).
Use ENTER to change selection.
CT02-025.816.04.10.02
05.13
Page 20 of 58
SSME CS
Siemens, 2012
SW Installation ICS
NOTE
21
Do not use 'Clear all harddrives 1-2(3)'. This option will format all hard drives only (removes all software). Reinstallation of the SW will not be started.
Wait until the CD drive opens, take out OEMsetup_1 English VB38(or VB39A) CD 1 of
5, and insert OEMsetup_2 English VB38(or VB39A) CD 2 of 5 , then press any key
For Chinese and Japanese language users only:
The MUI_CHN_JPN VB38 CD 2A of 5 has to be inserted directly after the OEMsetup_2
English VB38 CD 2 of 5 is ejected. If you miss inserting this CD on time and the computer asks for Som/5 ICS/IES SW/FW VB38 CD 3 of 5, you have to start the installation
from the beginning. No warning is issued for MUI_CHN_JPN VB38 CD 2A of 5, as for
the others if you miss inserting this CD.
Insert the additional MUI_CHN_JPN VB38 CD 2A of 5.
From the IES, shut down the application and switch off the system.
Insert the Som5_ICS_VB38B_SP2_DVD 1 of 1 in the ICS.
From the ICS, select System/End and shut down the system.
Switch off the system at the UPS.
Disconnect the network cable of the ICS from the Ethernet switch.
Siemens, 2012
CT02-025.816.04.10.02
05.13
Page 21 of 58
SSME CS
22
SW Installation ICS
Switch on the system at the UPS (computer "on").
The computer boots from CD-ROM. After a short while, the message Windows is
loading files appears. Wait until a Backup/Restore interface displays.
Select Restore the systemdrive item using the drop-down menu under Keyboard, and click OK.
CT02-025.816.04.10.02
05.13
Page 22 of 58
SSME CS
Siemens, 2012
SW Installation ICS
23
A message The 1st hard disk will be completely erased!! Do you want to continue? pops up. Click OK.
Fig. 5:
Siemens, 2012
CT02-025.816.04.10.02
05.13
Page 23 of 58
SSME CS
24
SW Installation ICS
Fig. 6:
CT02-025.816.04.10.02
05.13
Page 24 of 58
SSME CS
Siemens, 2012
SW Installation ICS
25
Fig. 7:
Wait until the DVD ejects automatically. At the same time, a message Restore of the
system ... ... appears. Remove the DVD and click OK.
Fig. 8:
In about 6 minutes, the system restarts automatically. The system continues with the
installation.
NOTE
In some cases, the message Do you want to keep the partitions? Press ... ... may display. Click No to erase the partition.
Installation running
Siemens, 2012
CT02-025.816.04.10.02
05.13
Page 25 of 58
SSME CS
26
SW Installation ICS
Fig. 9:
Select the system to be installed (refer to 2-2). Use the drop-down menu to change the
product name.
Click Start.
Completion of the ICS installation (approx. 25 minutes) is indicated by a pop-up window
with the message Please enter license.
Click Click here to start the Local Service Configuration to start the service software
(complete service license required).
CT02-025.816.04.10.02
05.13
Page 26 of 58
SSME CS
Siemens, 2012
SW Installation ICS
27
2.3
Installation at ICS
Installation at ICS
Siemens, 2012
CT02-025.816.04.10.02
05.13
Page 27 of 58
SSME CS
28
SW Installation ICS
Restore Steps
NOTE
2.4
Restore 1
In the main menu of the service software, select the Backup & Restore function.
Insert the ICS backup CD.
From Command, select Restore.
From Drives, select the corresponding drive.
From Archive, select <hostname>_SW-Settings02-PXXX_date_time_ok.ar.
From Groups, select all except User Settings and Service\Database\DBOffset, and
click Go.
BackupRestore Running ...; wait until Ready is displayed.
CT02-025.816.04.10.02
05.13
Page 28 of 58
SSME CS
Siemens, 2012
SW Installation ICS
29
Restore 2
In the main menu of the service software, select the Backup & Restore function.
From Command, select Restore.
From Drives, select the corresponding drive.
From Archive, select <hostname>_SW-Settings02-PXXX_date_time_ok.ar
NOTE
Siemens, 2012
CT02-025.816.04.10.02
05.13
Page 29 of 58
SSME CS
30
SW Installation ICS
From Archive, select VSim and click Go.
CT02-025.816.04.10.02
05.13
Page 30 of 58
SSME CS
Siemens, 2012
SW Installation ICS
31
Completion of Configuration
2.5
This is mandatory if "Clear data on second hard drive" was selected in the installation
screen.
From the Patient Browser, select Transfer -> Import from Offline.
From the drop-down list, select the path H:\SiteData\ReferenceImages.
Select all images and click OK.
After the import, the images are available in the Patient Browser.
Regional Settings
From the syngo user interface, select -> Options -> Configuration.
In the configuration panel, double-click the Regional and Language Options icon.
In the Regional Options tab card, select a preferred country and click Customize.
Change the date, time, and numbers as noted in the Regional Settings part.(Regional
Settings / p. 12)
In the Languages tab card, click Details and select the default input language type as
noted in the Regional Settings part.(Regional Settings / p. 12).
In the main menu of the service software, select the Configuration function.
Select Site Info and click >. Check/correct the Time Zone and the Time. Note: Do not
activate the NTP time server or select automatic Daylight Savings Time
If changes were made, click Save. Confirm the message displayed with OK.
Perform the following steps to configure keyboard languages other than English:
From the syngo user interface, select > Options > Configuration.
In the configuration panel, click the Regional and Language Options icon.
Select the Languages > Details tab card
Click Add and select the correct Input Language and confirm with OK.
Perform the following steps to configure keyboard languages other than English (except
Chinese and Japanese):
From the syngo user interface, select > Options > Configuration.
Siemens, 2012
CT02-025.816.04.10.02
05.13
Page 31 of 58
SSME CS
32
SW Installation ICS
Click OK in the remaining windows or close the remaining windows.
For Chinese/Japanese: Open the "DICOM/Character Set" dialog in "Local Service". Select
"allow multiple character set". Next, select the corresponding character set, for Japanese
"ISO 2022 IR 13" and for Chinese "GB 18030".
Perform the following steps to enable Windows XP access at the time of the update.
Enter the Service Key and open the Local Service main menu.
From the service software home menu, select Utilities.
Under Source, select Escape to OS and under Command select NT Command Interpreter.
BHC Configuration
CT02-025.816.04.10.02
05.13
Page 32 of 58
SSME CS
Siemens, 2012
SW Installation ICS
33
Click Start.
Additional Steps
NOTE
Siemens, 2012
CT02-025.816.04.10.02
05.13
Page 33 of 58
SSME CS
34
SW Installation ICS
Select Start > Programs / Accessories ->CommandPrompt.
In the open command window, type in perl c:\Somaris\utils\determinewizard.pl
Activate with Return.
This script will detect all Wizards that are active and connected to the shared
database and will make them available to the customer in the Configuration
menu.
CT02-025.816.04.10.02
05.13
Page 34 of 58
SSME CS
Siemens, 2012
SW Installation ICS
35
Fig. 18:
If the customer requires Auto Filming in the first or second IES, he or she can select this
under Options/Config/Examination.
Click Go
Click Finish.
Set the remote service access level
Siemens, 2012
CT02-025.816.04.10.02
05.13
Page 35 of 58
SSME CS
36
SW Installation ICS
If you activate the Mon_HQ function, the CT system will automatically send event log files to the SRS server.
Please make sure the customer has already agreed to activate this function. Otherwise, please ignore the configuration.
Pos. 2
Active status.
Pos. 3
Pos. 4
Ensure that the time period (start and end) is set correctly
Pos. 5
Pos. 6
Pos. 7
Pos. 8
Pos. 9
Pos. 10
Click Save.
CT02-025.816.04.10.02
05.13
Page 36 of 58
SSME CS
Siemens, 2012
37
3-
Insert the CD Som/5 IRS SW VB38 (or VB39) into the CD drive of the computer.
Switch the computer off and on again.
The computer boots from CD.
When the CD drive opens, take out the CD and reboot the computer again.
NOTE
The computer starts the SW installation and will be finished within approx. 30 minutes.
IRS Configuration
After the IRS installation is finished, enter the Service Key in the ICS system and open
the Local Service main menu.
When "Ready" is displayed, remove the ICS backup CD and restart the complete system.
Siemens, 2012
CT02-025.816.04.10.02
05.13
Page 37 of 58
SSME CS
38
SW Installation IES
4-
Preparations
NOTE
If you dont have a current backup, create one now, if possible. Refer to chapter 1 "Creating backup files".
To perform the SW installation of the ICS, the following data media are required:
CD OEMsetup_1 English VB38 (or VB39) CD 1 of 5
MUI_CHN_JPN VB38 CD 2A of 5
CD OEMsetup_2 English VB38 (or VB39) CD 2 of 5
CD Som/5 ICS/IES SW/FW VB38 (or VB39) CD 3 of 5
CD Som/5_DICOM_SR_Viewer VB38 (or VB39) CD 4 of 5
CD Som/5_ICS/IES_SW/FW VB38 (or VB39) CD 5 of 5
Backup CD-R
NOTE
NOTE
Unplug the network cable between the IES and the Ethernet
switch.
CT02-025.816.04.10.02
05.13
Page 38 of 58
SSME CS
Siemens, 2012
SW Installation IES
39
4.1
Refer to the procedures for 'ICS installation with recovery DVD'(Installation with Recovery DVD (for SP4) / p. 19).
Siemens, 2012
CT02-025.816.04.10.02
05.13
Page 39 of 58
SSME CS
40
SW Installation IES
4.2
Click Home and terminate the service software by closing the Browser window.
Select System/End and Shut down the system.
Insert the CD OEMsetup_1 English VB38 (or VB39) CD 1 of 5
Power off the IES.
Disconnect the network cable of the IES from the Ethernet switch.
Power on the IES.
The computer boots from CD-ROM. After a short while, the following window
appears:
Fig. 21:
Press <Enter> to continue installation (the IES is beeping). The IES restarts.
Select distribution type CUSTOMER (default).
Press Enter, and fill in the machine name (host name) as noted by replacing the default
entry "MedPC". Press Enter.
NOTE
Please note that the computer name must not contain blanks
or underscores. Use the following naming convention for the
IES computer name: ctw<serial number> (e.g. ctw12345, IES
connected to ct12345).
'Keep data on other hard drive(s)' is the default setting and may not be modified (only
one hard drive available)
NOTE
Do not use 'Clear all hard drive(s)'. This option will only format all hard drives (removes all software). No reinstallation of SW will be started.
CT02-025.816.04.10.02
05.13
Page 40 of 58
SSME CS
Siemens, 2012
SW Installation IES
41
When the computer beeps, take out the CD OEMsetup_1 English VB38/VB39 CD 1 of
5, insert the CD OEMsetup_2 English VB38 (or VB39) CD 2 of 5 and press any key
For Chinese and Japanese language users only:
The MUI_CHN_JPN VB38 CD 2A of 5 has to be inserted directly after the OEMsetup_2
English VB38 CD 2 of 5 is ejected. If you miss inserting this CD on time and the computer asks for Som/5 ICS/IES SW/FW VB38 CD 3 of 5, you have to start the installation
from the beginning. No warning is issued for MUI_CHN_JPN VB38 CD 2A of 5, as for
the others if you miss inserting this CD.
Insert the additional MUI_CHN_JPN VB38 CD 2A of 5.
Installation running
Siemens, 2012
CT02-025.816.04.10.02
05.13
Page 41 of 58
SSME CS
42
SW Installation IES
The following screen appears:
Select syngo CT Workplace in the field "Product Name". Use the drop-down menu to
change to syngo CT Workplace.
Click Start.
Completion of IES installation (approx. 15 minutes) is indicated by a pop-up window with
the message Please enter license.
NOTE
Continue only when the ICS is fully installed and started up.
Click Click here to start the Local Service Configuration to start the service software
(complete service license required).
CT02-025.816.04.10.02
05.13
Page 42 of 58
SSME CS
Siemens, 2012
SW Installation IES
43
4.3
Installation at IES
Installation at IES
Siemens, 2012
CT02-025.816.04.10.02
05.13
Page 43 of 58
SSME CS
44
SW Installation IES
Restore Steps
NOTE
4.4
Restore
In the main menu of the service software, select the Backup & Restore function.
Insert the backup medium for IES.
From Command, select Restore.
From Drives, select the corresponding drive.
From Archive, select SW-Settings02-Wiz_date_time.ar.
From Groups, select all and click Go.
BackupRestore Running ...; wait until Ready is displayed.
CT02-025.816.04.10.02
05.13
Page 44 of 58
SSME CS
Siemens, 2012
SW Installation IES
45
Completion of Configuration
4.5
Regional Settings
From the syngo user interface, select -> Options -> Configuration.
In the configuration panel, double-click the Regional and Language Options icon.
In the Regional Options tab card, select a preferred country and click Customize.
Change the date and time as noted in chapter 1.
NOTE
In the Languages tab card, select the default input language and the keyboard type as
noted on page 1-4.
In the main menu of the service software, select the Configuration function.
Select Site Info and click >. Check/correct the time zone and the time. Note: Do not
activate the NTP time server or select automatic Daylight Savings Time.
If changes were made, click Save. Confirm the message displayed with OK.
Perform the following steps to configure keyboard languages other than English:
From the syngo user interface, select > Options > Configuration.
In the configuration panel, click the Regional and Language Options icon.
Double-click Regional and Language Options.
Select the tab card Languages > Details.
Click Add and select the correct Input Language and confirm with OK.
Perform the following steps to configure keyboard languages other than English (except
Chinese and Japanese).
From the syngo user interface, select > Options > Configuration.
Siemens, 2012
CT02-025.816.04.10.02
05.13
Page 45 of 58
SSME CS
46
SW Installation IES
Click OK in the remaining windows or close the remaining windows.
For Chinese/Japanese: Open the "DICOM/Character Set" dialog in "Local Service". Select
"allow multiple character set". Next, select the corresponding character set, for Japanese
"ISO 2022 IR 13" and for Chinese "GB 18030".
Perform the following steps to enable Windows XP access at the time of the update.
Enter the Service Key and open the Local Service main menu.
From the service software home menu, select Utilities.
Under Source, select Escape to OS and under Command select NT Command Interpreter.
CT02-025.816.04.10.02
05.13
Page 46 of 58
SSME CS
Siemens, 2012
SW Installation IES
47
4.6
Click Go.
Click Finish.
Set the remote service access level
Siemens, 2012
CT02-025.816.04.10.02
05.13
Page 47 of 58
SSME CS
48
Software Self-test
IES
Select
Type
Folder:
Drive:
Z:
\\<ICS-Hostname>\C$
CT02-025.816.04.10.02
05.13
Page 48 of 58
SSME CS
Siemens, 2012
49
Environment
Configuration
Security
Database
Misc
Communication (only if the IES is connected)
Performance
In case of errors, refer to the hints for troubleshooting.
NOTE: If you have to perform troubleshooting, make sure that you recreate the SomSTSysInfo.info and copy and paste it between the ICS and IES as described above. Otherwise, you will get the same error messages even though you have already solved the
problem.
Siemens, 2012
CT02-025.816.04.10.02
05.13
Page 49 of 58
SSME CS
50
Monitor Configuration
5.1
Log in as Administrator
Go to the Settings > Control Panel
> Display
CT02-025.816.04.10.02
05.13
Page 50 of 58
SSME CS
Siemens, 2012
51
5.2
The following identification steps are only valid for ICS Tower
9B/9B2. Please be careful.
Login as Administrator
Open file C:\ DMILOG.txt .
Add one line Chassis Information (1/Fig. 26 / p. 51) to the end of this txt file
Find the line KEY: SMBIOSAssetTag VALUE:... ... (2/Fig. 26 / p. 51), copy the whole
line and paste it to the end of the txt file.
In the last line change KEY:SMBIOSAssetTag VALUE:... ... to Asset Tag:... ...
(3/Fig. 26 / p. 51)
Chassis Information
Pos. 2
SMBIOSAssetTag
Pos. 3
Asset Tag
Siemens, 2012
CT02-025.816.04.10.02
05.13
Page 51 of 58
SSME CS
52
Final Check
5.3
Perform scans in the customer mode and expose a film to ensure the camera is functioning properly.
CT02-025.816.04.10.02
05.13
Page 52 of 58
SSME CS
Siemens, 2012
53
5.4
Start the service software and select the Backup & Restore function in the main menu.
Insert the backup CD-R for the ICS.
From Command, select Backup.
From Drives, select the CD drive, e.g., [-R-] CD-R.
From Packages, select CT-Settings-PXXX and click Go.
BackupRestore Running ...
Siemens, 2012
CT02-025.816.04.10.02
05.13
Page 53 of 58
SSME CS
54
Perform the following steps to disable Windows XP access for the customer. Administrator
privileges are required; you must use the command shell of the service software.
CT02-025.816.04.10.02
05.13
Page 54 of 58
SSME CS
Siemens, 2012
55
5.5
Start the service software and select the Backup & Restore function in the main menu.
Insert the backup CD-R for the IES.
From Command, select Backup.
From Drives, select the corresponding drive.
From Packages, select CT-Settings-IES and click Go.
BackupRestore Running ...
Siemens, 2012
CT02-025.816.04.10.02
05.13
Page 55 of 58
SSME CS
56
Perform the following steps to disable Windows XP access for the customer. Administrator
privileges are required. As a result, deactivation is performed using the command shell of
the service software.
CT02-025.816.04.10.02
05.13
Page 56 of 58
SSME CS
Siemens, 2012
57
5.6
Chapter
Change
Reason
2, 4
ECR 576313
ECR 585334
Siemens, 2012
CT02-025.816.04.10.02
05.13
Page 57 of 58
SSME CS
58
CT02-025.816.04.10.02
05.13
Page 58 of 58
SSME CS
Siemens, 2012