Beruflich Dokumente
Kultur Dokumente
User Manual
1. Introduction
1.1 System include
1.1.1 Mini PC
Configurations:
CPU: INTELATOM D2700 2.13G
Graphic card: NVIDIA Geforce GT520 Processor
Memory: 2GB DDR3
Hard disk: 320G
Dimension: 19cm x 15cm x 2.6cm
Voltage: 12V
1.1.2 Projector
Configurations:
Brand: Casio XJ-M150 Laser Projector
Brightness (Lumens) : 3000 ANSI
Contrast (Full On/Off) : 1800:1
Native: 1024x768 Pixels
Light Source: Laser & LED
Life: 20000 hours
Voltage: 100V - 240V
1.1.4 Holder
1.2 Overview
Power box
Sound speaker
Fan
USB dongle
Projecor
Mini PC
2. Quick start
2.1 Power on
We will install Interactive projection system in PC and connect everything well for you before
you got the system.
Prepare battery for wireless keyboard and mouse and the remote of Casio projector.
Give electricity to the whole system and it will run automatically without any further
installation.
Click OK. All the motion of visitors in this red rectangle will be detected by video capture.
To test the interactive area:
1. Put your hand into the interactive area to see if there is shadow of hand appear in the
Mirror window.
2. Check the connection of speaker, test sound.
4.2 Run the effect
Click
Run button to start it. And you can set all the effects run automatically in
advanice from the play menu.
*
* Press ESC hot key to exit from the running effect and go back to the main window of
Schedule-Manger.
* Press Alt + direction key , switch to the previous effect directly.
* Press Alt + direction key , switch to the next effect directly.
4.3 Customization of the effect
Elements of effect can be replaced to meet clients own requirement, supply the functions
for you to edit the elements such as image, video, etc. Its easy and flexible to do.
Lotus effect settings:
To customize effect
1. Select the Lotus effect.
2. Click Play on the menu bar.
3. Click Effect setting to replace the elements of effect.
8
2. Sound setting: Click Change, open the new sound with the format (*.mp3), The current
sound will be successfully replaced . If you select Backup original sound then it will save
to a new folder under Lotus effects folder
10
2.Write an effect name in the textbox, it will create a new folder. Select .swf or .exe format
effect file and press Create button.
Please note that if there are some related file such as *.dll or *.lib or other data, you need to
copy those file to the new folder you created.
11