Beruflich Dokumente
Kultur Dokumente
Operating Instructions
MODEL:
CDT7
10080220
US
3146518
AD
86038220 04/26/11
Warranty Registration
Thank you for purchasing a Windsor product. Warranty registration is quick and easy.
Your registration will allow us to serve you better over the lifetime of the product.
To register your product go to:
www.windsorind.com/WarrantyRegistration.aspx
For customer assistance:
1-800-444-7654
CADET 86038220
TABLE OF CONTENTS
Machine Data Log/Overview.........................1
Table of Contents..........................................2
SAFETY
Important Safety Instructions ........................2-1
Hazard Intensity Level ..................................2-2
Grounding Instructions..................................2-3
OPERATIONS
Technical Specifications. ..............................3-1
Controls/Component Location ......................3-2
Filling Operation............................................3-5
Operations. ...................................................3-6
Cleaning Procedure. .....................................3-8
Accessory Tool Usage. ............................... 3-10
MAINTENANCE
Service Schedule .............................. 4-1
Periodic Maintenance. ..................................4-2
Daily/ Regular Maintenance..........................4-2
Vacuum Motor Replacement ........................4-3
Belt Replacement..........................................4-4
Solution Pump Replacement ............ 4-5
Wiring Diagram. ............................................4-6
Troubleshooting Chart ..................................4-7
CADET 86038220
Periodic
Daily/Regular
Troubleshooting
1-1
CADET 86038220
SAFETY INSTRUCTIONS
CADET 86038220
2-1
SRET
Cet appareil ne doit tre connecter qu a des prises ayant une sortie de terre.
Ne pas laisser lappareil sans surveillance lorsquil est branch. Dbrancher lorsque lappareil nest pas utilis et
avant lentretien.
Pour reduire les risques de choc electrique, ne pas utiliser l exterieur et ne pas aspirer de matires humides.
Ne pas permettre aux enfants de jouer avec lappareil. Une attention particulire est ncessaire lorsque lappareil
est utilis par des enfants ou proximit de ces derniers.
Nutiliser que conformment cette notice avec les accessoires recommands par le fabricant.
Ne pas utiliser si le cordon ou la fiche est endommag. Retourner lappareil un atelier de rparation sil ne
fonctionne pas bien, sil est tomb ou sil a t endommag, oubli lextrieur ou immerg.
Ne pas tirer soulever ou traner lappareil par le cordon. Ne pas utiliser le cordon comme une poigne, le coincer
dans lembrasure dune porte ou lappuyer contre des artes vives ou des coins. Ne pas faire rouler lappareil
sur le cordon.
Garder le cordon lcart des surfaces chaudes.
Ne pas dbrancher en tirant sur le cordon. Tirer plutt la fiche.
Ne pas toucher la fiche ou lappareil lorsque vos mains sont humides.
Ninsrer aucun objet dans les ouvertures. Ne pas utiliser lappareil lorsquune ouverture est bloque. Sassure
que de la poussire, de la peluche, des cheveux ou dautres matires ne rduisent pas le dbit dair.
Tenga especial cuidado al manejar la apiradora en una escalera.
Ne pas aspirer de matires en combustion ou qui dgagent de la fume, comme des cigarettes, des allumettes
ou des cendres chaudes.
Cette machine nest pas adapte au ramassage de poussires dangereuses.
Mettre toutes les commandes la position ARRT avant de dbrancher lappareil.
Ne pas aspirer des liquides inflammables ou combustibles, comme de lessence, et ne pas faire fonctionner dans
des endroits o peuvent se trouver de tels liquides.
Cette machine est destine un usage commercial. Elle est recommande davantage pour les domaines
htelier, scolaire, hospitalier, industriel ou pour les bureaux, les chanes de magasin, que pour un usage
domestique normal.
Lentretien et les rparations de la machine doivent tre effectues par un personnel qualifi.
Si de la mousse ou du liquide sort de la machine, la mettre hors tension immdiatement.
2-2
! WARNING
WARNING - Hazards or unsafe practices which COULD result in severe personal injury or death.
! CAUTION
CAUTION - Hazards or unsafe practices which could result in minor personal injury or product or property
damage.
FOR SAFETY: To Identify actions which must be followed for safe operation of equipment.
Report machine damage or faulty operation immediately. Do not use the machine if it is not in proper
operating condition. Following is information that signals some potentially dangerous conditions to the
operator or the equipment. Read this information carefully. Know when these conditions can exist. Locate
all safety devices on the machine. Please take the necessary steps to train the machine operating
personnel.
FOR SAFETY:
DO NOT OPERATE MACHINE:
Unless Trained and Authorized.
Unless Operation Guide is Read and understood.
In Flammable or Explosive areas.
In areas with possible falling objects.
WHEN SERVICING MACHINE:
Avoid moving parts. Do not wear loose clothing; jackets, shirts, or sleeves when working on the
machine. Use manufacturer approved replacement parts.
CADET 86038220
2-3
ATTENTION - Dangers ou mthodes dangereuses qui pourraient provoquer des blessures lgres ou une dtrioration du produit ou des biens
immobiliers.
POUR VOTRE SCURIT : ce signe permet didentifier les mesures de prcaution prendre pour assurer
un bon fonctionnement du matriel.
Rendre compte immdiatement dune dfaillance ou dune dtrioration de la machine. Ne pas utiliser la machine si
celle-ci ne fonctionne pas correctement. Lire soigneusement les informations ci-dessous signalant certains dangers
potentiels pour loprateur de la machine. Loprateur doit tre absolument au courant de ces dangers potentiels.
Localiser tous les dispositifs de scurit sur la machine. Il est conseill de prendre les mesures ncessaires pour
former le personnel oprateur.
POUR VOTRE SCURIT :
NE PAS MANOEUVRER LA MACHINE :
Lorsquon nest pas expriment ou qualifi.
Lorsque le guide dutilisation nest pas t lu ou compris.
Dans des zones inflammables ou explosives.
Dans des zones o des objets peuvent tomber.
LORS DE LENTRETIEN DE LA MACHINE :
viter les parties amovibles. Ne pas porter de vtements amples, tels que des vestes, des chemises ou des
vtements avec manches lors de lutilisation de la machine. Utiliser les pices dtaches Windsor
homologues.
2-4
CADET 86038220
GROUNDING INSTRUCTIONS
ELECTRICAL:
In the USA, this machine operates on a standard 15
amp 115V, 60 Hz, A.C. power circuit. The amp,
hertz, and voltage are listed on the data label found
on each machine. Using voltages above or below
those indicated on the data label will cause serious
damage to the motors.
Grounding Pin
GROUNDING CONNECTION
USING AN ADAPTOR
Grounded
Outlet
FIGURE A
EXTENSION CORDS:
If an extension cord is used, the wire size must be at
least one size larger than the power cord on the
machine, and must be limited to 50 feet (15.5m) in
length.
GROUNDING INSTRUCTIONS:
This appliance must be grounded. If it should
malfunction or break down, grounding provides a
path of least resistance for electric current to reduce
the risk of electric shock. This appliance is equipped
with a cord having an equipment-grounding
conductor and grounding plug. The plug must be
inserted into an appropriate outlet that is properly
installed and grounded in accordance with all local
codes and ordinances.
This appliance is for use on a nominal 120-volt
circuit, and has a grounded plug that looks like the
plug in Fig. A. A temporary adaptor that looks like
the adaptor in Fig. C may be used to connect this
plug to a 2-pole receptacle as shown in Fig. B, if a
properly grounded outlet is not available. The
temporary adaptor should be used only until a
properly grounded outlet (Fig. A) can be installed by
a qualified electrician. The green colored rigid ear,
lug, or wire extending from the adaptor must be
connected to a permanent ground such as a
properly grounded outlet box cover. Whenever the
adaptor is used, it must be held in place by a metal
screw.
Metal Screw
Adaptor
Grounded
Outlet Box
FIGURE B
Adaptor
FIGURE C
Note: Adaptors are not allowed in Canada.
CADET 86038220
2-5
TECHNICAL SPECIFICATIONS
POWER TYPE
GENERAL DIMENSIONS/WEIGHT
ELECTRICAL: 115 V, 15 A, 60 HZ
34
(86.36cm)
41
(104cm)
3-1
17.5
(44.45cm)
CADET 86038220
CONTROLS/COMPONENT LOCATIONS
1. Main Handle. Used to pull and maneuver
machine.
2. Electrical Cord.
3
CADET 86038220
3-2
CONTROLS/COMPONENT LOCATIONS
1. Solution Accessory Tool Hookup. Used for
various auxiliary cleaning tools.
10
7. Vacuum Shoe.
8. Brush Housing.
9. Front Lifting Handle.
10. Cleaning Solution Filter.
3-3
CADET 86038220
CONTROLS/COMPONENT LOCATIONS
1. Solution Intake Cover.
2. Vacuum Intake Cover.
3. Float Shut-Off.
4. Clean-Out Opening.
5. Pour Spout.
6. Lift Handle.
6
1
2
4
6
5
CADET 86038220
3-4
FILLING OPERATIONS
STEP
1
RECOVERY TANK
Remove recovery
tank
SOLUTION
TANK
STEP
2
FILL LINE
Add water
7 gal.
(26.5 ltr.)
140F (60C)
STEP
3
7 14oz.
(207ml 414ml)
Add cleaning
chemical
3-5
Non-Compatible Chemicals
Aldehydes
Aromatic Hydrocarbons
SP Butyls
Carbon Tetrachloride
Clorox*
Chlorinated Bleaches
Chlorinated Hydrocarbons
Lysol*
Methyl Ethel Ketone (MEK)
Perchorethylene (perc)
Phenolics
Trichlorethylene
D-Limonene
STEP
4
CADET 86038220
Replace recovery
tank
OPERATIONS
STEP
1
STEP
2
STEP
3
STEP
4
1/8in
(3mm)
CORRECT
INCORRECT
PUMP
ON
VACUUM
ON
CADET 86038220
3-6
OPERATIONS
Tip machine back by main handle to move
to starting point.
STEP
5
STEP
3-7
STEP
INTERMITTENT
CONTINUOUS
CADET 86038220
CLEANING PROCEDURE
1ft.
(30cm)
STEP
1
STEP
2
STEP
3
OFF
1in.
(25mm)
SOLUTION
INTAKE COVER
VACUUM
INTAKE COVER
CADET 86038220
3-8
CLEANING PROCEDURE
STEP
5
Use right side of machine for cleaning
against walls.
STEP
6
After cleaning, turn off all controls, return
brush to storage position and carefully
unplug machine.
OFF
OFF
OFF
STEP
7
To speed drying, use a Windblower fan.
STEP
8
Empty recovery tank by releasing dump
hose. Use a hose with cold water to clean
out the recovery tank. Also drain solution
tank after each use.
3-9
RECOVERY
DRAIN
SOLUTION
DRAIN
CADET 86038220
STEP
STEP
PUMP
VACUUM
ON
ON
OFF
STEP
CADET 86038220
3-10
MAINTENANCE
SERVICE SCHEDULE
MAINTENANCE
Check machine for cord damage
Check recovery dome and gasket for
damage and cleanliness
Check brush should be clean with no
lint or strings attached
Inspect vac shoe for blockage; remove
fibers with coat hanger, etc.
Check hoses for wear, blockages, or
damage
Check handles, switches, and knobs
for damage
Check vac motor intake filter and clean
Run one gallon of water through
system
Clean out recovery tank and check
float valve to make sure it moves freely
Clean out solution tank and remove
and clean vacuum intake screen
Clean outside of all tanks and check for
damage
Run vac motor for at least one minute
to allow motor to dry
Store with dome off tank to allow the
tank to dry
Check all bearings for noise
Check all gaskets for wear and leakage
Check vacuum intake screen for
damage; replace if necessary
Check pump pressure; observe spray
pattern and check with gauge if
necessary
Check and clean solution screen
Check belts for wear and replace as
necessary
Check brush for wear; ensure bristles
are not damaged
Check cables for fraying
Check the spray bar (manifold) for
damage; replace if broken or bent
Check condition of vac shoe and frame
for damage
Check overall performance of machine
Check vac motor carbon brushes
4-1
DAILY
WEEKLY
QUARTERLY
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
CADET 86038220
MAINTENANCE
PERIODIC MAINTENANCE
Twice a month, flush a white vinegar solution (One
quart vinegar to two gallons of water) or antibrowning solution (mixed as directed) through the
extractor. This will prevent build-up of alkaline
residue in the system. If spray jets become clogged,
remove the spray tips, wash them thoroughly, and
blow-dry.
NOTE: Do not use pins, wire, etc. to clean nozzles
as this could destroy spray pattern.
Periodically inspect all hoses, electrical cables and
connections on your machine. Frayed or cracked
hoses should be repaired or replaced to eliminate
vacuum or solution pressure loss. If the cable
insulation is broken or frayed, repair or replace it
immediately. Dont take chances with electrical fire
or shock.
CADET 86038220
4-2
MAINTENANCE
Only qualified maintenance personnel are to perform the
following repairs.
Vacuum Motor Carbon Brushes Replacement (Ametek)
Carbon
Brushes
Important:
These brushes wear quicker as the length shortens due to
increased heat. Spring inside brush housing will damage
motor if brushes are allowed to wear away completely.
3 [9.5mm]
8
Important:
These brushes wear quicker as the length shortens due to
increased heat. Spring inside brush housing will damage
motor if brushes are allowed to wear away completely.
3/8 (9.5mm)
4-3
Note:
Place
stop in
groove.
CADET 86038220
MAINTENANCE
Only qualified maintenance personnel are to
perform the following repairs.
86249420
PRV NO. 62759
86227350
PRV NO. 05016
CADET 86038220
4-4
MAINTENANCE
Only qualified maintenance personnel are to perform the following repairs.
4-5
CADET 86038220
WIRING DIAGRAM
86268450
PRV NO. 88332
86268830
PRV NO. 88636
86266890
PRV NO. 88655
86004480
PRV NO. 41353
CADET 86038220
4-6
FRAME ASSEMBLY
30
7
19
18
15
21
12
33
11
10
3
28
34
31
6
5
22
26
9
32
25
27
16
29
8
13
20
5-1
14
4
24
FRAME ASSEMBLY
REF
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
PART NO.
86003620
86004340
86001660
86004480
86239610
86026150
86005640
86005810
86198530
86249430
86006020
86250130
86250140
86006580
86273980
86010630
86010660
86010650
86006550
86256190
86259960
86066230
86134490
86253090
86002370
86233140
86274760
86006530
86272160
86276610
86005710
PART NO.
QTY
DESCRIPTION
OPEN
34341
39528
41236
41353
41354
53640
57030
57245
99809
62761
64099
66282
66288
70085
70066
OPEN
87013
87025
87018
70074
73197
OPEN
89506
03107
99667
73943
20035
20041
70271
70057
66052
70697
57105
1
1
2
1
1
1
2
3
2
1
1
6
2
2
2
2
2
2
2
1
2
1
10
1
1
1
2
2
1
1
3
SERIAL NO.
FROM
NOTES:
100046610
5-2
BRUSH ASSEMBLY
31
15
25
11
25
29
30
8
16
12
26
24
38
18
16
30
39
10
22
34
4
44
45
36
40
37
33
47
41
26
32
17
28 35
3
43
21
13
42
27
19
14
17
23
20
30
25
29
25
46
2
5
5-3
BRUSH ASSEMBLY
REF
PART NO.
PRV NO.
QTY
DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
86000730
86227100
86000900
86001100
86001140
86001300
86001310
86003620
86004060
86004470
86004980
86093080
86005110
86005120
86005130
86005640
86005850
86249410
86249420
86264700
86250680
86006220
86006430
86006510
86006590
86006650
86006700
86275530
86010640
86010650
86007030
86230620
86251710
86003070
86003370
86278130
86272770
86272510
86008650
86342240
86006030
86003390
86001140
86227150
86228890
86028010
86004750
03110
04084
09019
11045
12514
140343
140351
34341
36192
41345
50998
51311
51312
51314
51317
57030
57271
62758
62759
62762
64098
66192
67411
70043
70088
70177
70232
70497
87016
87018
70675
12524
67467
27805
29157
70737
67094
66310
80604
64102
29208
12514
05158
09137
47383
47416
1
1
2
1
1
1
1
REF
2
1
1
1
1
2
1
4
2
1
1
2
1
1
1
2
6
7
2
2
4
6
4
1
1
1
1
1
1
2
2
1
1
1
1
1
2
1
REF
AXLE, ROLLER
ADAPTER, BRUSH BRG.
BEARING, 1.125ODX.500IDX.375
BELT, 180J6 MICRO-V
BRUSH, 15L X 3.38OD
BRKT, BRUSH PULLEY
BRKT, BRUSH HEIGHT
FRAME, CLP FAMILY
GUARD, THREAD
HOUSING, BRUSH 15"
LABEL, BRUSH HEIGHT
LINKAGE, ASM, BRUSH HEIGHT
LINKAGE ASM, ROLLER SUPPORT
LINK, ROLLER, FRONT
LEVER, HEIGHT ADJUSTMENT
NUT, 10-32 HEX NYLOCK
NUT, 3/8 DIA CAP, TYPE PUSH PLT
PLATE, BRUSH HOUSING RH
PLATE, BRUSH HOUSING LH
PLATE, AXLE RETAINER
PULLEY, 2.2 OD, 6GR, MICRO-V
PIN, ROLL 1/4 X 1.25L
ROLLER, 1.9 DIA X 10.5 LG
SCR, 10-32 X 5/8 PFHMS
SCR, 10-32 X 1/2 PPHMS SS DL
SCR, 10-32 X 1/2 FHMS SS
SCR, 10-32 X 3/8 FHMS SS
SCR, #10-24 X 1/2 SHCS
WASHER, #10 LOCK EXT STAR SS
WASHER, #10 X 9/16 OD
SCR, 1/4-20 X.5/8 THMS PLTD NP
BRUSH, 15 L X 3.35 OD G2
RING, TOLERANCE 7/8
CLIP, BEARING
DRIVER, BRUSH
SHLDR BOLT, 3/8 OD X 3/8 L SS NP
RING, 1/2 EXT. SNAP
PIN, CLEVIS 1/4 X 1/2 PLTD
COTTER, 1/4" RING
SPACER, .81 X 1.06 X .125
PULLEY ASM, BRUSH
DRIVER ASM, BRUSH
BRUSH ASM, 15 IN
ADAPTER, BRUSH BRG. DIE CAST
BEARING, R6 3/8 ID
BRUSH BEARING ASM.
KIT, BRNG/ADPTR EXTRCTR
CADET 86038220
SERIAL NO.
FROM
NOTES:
1000090563
1000090563
1000090563
1000090563
1000090563
5-4
PUMP ASSEMBLY
PRIOR TO SERIAL NO. 1000166663
14
3
20
13
4
10
16
9
2
16
21
23
18 1
12
19
15
20
11
17
7
25
26
28
(SEE SOLUTION 5
TANK)
26
5-5
24
27
PUMP ASSEMBLY
REF
PART NO.
PRV NO.
QTY
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
86002470
86002480
86003470
86003480
86004570
86004580
86005640
86026380
86250140
86006830
86273750
86003640
86008370
86026940
86010810
86010650
86010820
86005590
86005580
86003500
86274290
22072
22090
31072
31073
44067
44068
57030
65200
66288
70386
70011
34355
78420
84160
87191
87018
87192
56014
56012
31076
70162
880278
39529
39530
39531
73963
39591
1
2
1
1
2
2
2
1
2
2
2
1
1
1
2
4
2
1
1
2
2
1
1
1
3
1
1
86267400
86281890
86004350
86281900
86253020
86004400
DESCRIPTION
COUPLING, 1/4 ANCHOR W/1" HEX
CONNECTOR, 1/8FPT X 1/4 TUBEQC
ELBOW, SWIVEL, 1/4MPTX1/4TUBE
ELBOW, SWIVEL,1/4MPTX3/8TUBEQC
JET BODY, MINI PROMAX BODY
JET, MINI PROMAX 9504
NUT, 10-32 HEX NYLOCK
PUMP ASM, 115V 73 PSI W/CONN
PLUG, 9/16 OD BLK NYLON
SCR, 10-32 X 1.0 PPHMS
SCR, 1/4-20 X 5/8 HHCS SS
FITTING,1/4 TUBE,"Y", QC
TEE, 1/4 MPT X 3/8 TUBE, QC
VALVE ASM,SOLENOID CLP FAMILY
WASHER, 1/4"IDX1.0OD. FLAT SS
WASHER, #10 X 9/16 OD
WASHER, 7/16 X 3/4 X .19RUBBER
NIPPLE, 1/4 CLOSE
NIPPLE, 1/4 FPT QD
ELBOW, 1/4 MPT X 3/8 TUBE, QC
SCR, 10-32 X 3/8 PPHMS SS
OPEN
WIRE, 22" GRN/18 76011 X 76011
HOSE, 3/8 URETHANE X 29"
HOSE, 3/8 NYLON X 6"
HOSE, 1/4 URETHANE X 6"
SCREEN, INTAKE
HOSE, 3/8 ID NYL11 YLW X 29
SERIAL NO.
FROM
NOTES:
1000029065
1000046610
5-6
PUMP ASSEMBLY
FROM SERIAL NO: 1000166663
14
3
20
8
4
13
10
16
9
2
16
21
23
18
1
12
19
15
20
11
17
7
26
28
29
29
28
C
(SEE SOLUTION
TANK)
26
5-7
24
27
6
5
PUMP ASSEMBLY
REF
PART NO.
PRV NO.
QTY
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
86032470
86002480
86003470
86003490
86004570
86004580
86005640
86026410
86250140
86274410
86273750
86003640
86008360
86258900
86010810
86010650
86010820
86247750
86234560
86003500
86006590
22072
22090
31072
31074
44067
44068
57030
65257
66288
70195
70011
34355
78419
84179
87191
87018
87192
56055
22097
31076
70088
OPEN
880278
39720
OPEN
39531
73963
39721
29277
1
2
1
1
2
2
2
1
2
2
2
1
1
1
2
4
2
1
1
2
2
1
1
3
1
2
2
86267400
86282340
86281900
86253020
86282350
86279930
DESCRIPTION
SERIAL NO.
FROM
NOTES:
5-8
11
7
13
10
2
12
8
6
7
11
5-9
PART NO.
PRV NO.
QTY
1
2
3
4
5
6
7
8
9
10
11
12
13
86227350
86234760
86005810
86006790
86275120
86006840
86008130
86010620
05016
27674
57245
70351
70360
70390
73958
85039
OPEN
87013
87074
35171
73955
4
1
4
2
4
4
8
1
4
8
1
2
86010630
86010700
86003780
86008120
DESCRIPTION
SERIAL NO.
FROM
NOTES:
5-10
22
12
16
8
11
2
4
21
7
4
1
17
18
3
6
14
23
9
10
19
13
15
5
20
D
SEE SOLUTION
TANK
5-11
PART NO.
PRV NO.
QTY
DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
86001240
86001980
86230210
86002010
86234320
86005670
86005760
86064400
86006950
86006710
86007120
86007140
86256240
86010800
86004480
86242720
86010750
86005700
86006830
86234110
86242400
86242410
86245040
14020
14700
14832
14942
23679
57040
57116
61348
70532
70235
72126
72130
73505
87189
41353
500180
87100
57104
70386
23086
500077
500078
50279
1
1
1
2
1
2
2
1
9
2
1
2
1
9
REF
1
2
3
1
1
1
1
1
SERIAL NO.
FROM
NOTES:
1000032157
5-12
29
18
32
30*
24
33
25
13
13A
13B
10
16*
23
17
SEE CONTROL
PANEL
7*
15
12
18
A
21
SEE FRAME
ASM
22
34
11*
8
9
19*
28*
20 27*
SEE FRAME
ASM
5*
26*
C
SEE PUMP ASM
18
14
5-13
PART NO.
PRV NO.
QTY
DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
13
86233140
86233150
86003080
86003090
86235500
86003790
86003920
86281880
86240009
86004340
86001590
86240980
86026880
20041
20042
27809
27810
31081
35175
35231
39526
39527
39528
40049
41348
53789
3
1
1
1
1
2
2
1
1
REF
1
1
1
13A
86135340
14258
13B
86135320
140687
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
86006600
86006590
86032240
86259060
86010650
86007970
86010630
86006580
86078950
86233260
86272840
86256170
86003950
86003960
86003970
86275690
86003940
86026660
86002870
86232280
86177090
70114
70088
75257
85037
87018
73864
87013
70085
20035
20092
67147
73169
35236
35237
35238
70525
35235
75276
27417
500012
03-000261
2
2
1
1
10
1
3
3
2
1
1
1
1
1
1
6
1
1
1
1
1
SERIAL NO.
FROM
*
*
NOTES:
SERVICE
ONLY
SERVICE
ONLY
1000032157
* ITEMS
5-14
16
15
18
7
11A
4
12
8
10A
1A
14A
12
13
17
2
6
11B
10B
1B
14B
12
5-15
PART NO.
PRV NO.
QTY
1A
1B
2
3
4
5
6
7
8
9
10A
10B
11A
11B
12
13
14A
14B
15
16
17
18
86002400
86002350
86233140
86008400
86003110
86235280
86003630
86003910
86003930
86004200
86004510
86004450
86004500
86006240
86006600
86032250
8001370
86001190
86002870
86242230
86245940
86003330
20064
20002
20041
78499
27816
28060
34351
35230
35232
39353
41391
40019
41390
66227
70114
75258
140408
140133
27417
500009
50995
28061
1
1
1
1
2
1
1
1
2
1
1
1
1
1
6
1
1
1
1
1
1
1
DESCRIPTION
CLAMP, 2.0" WORM GEAR X .312
CLAMP, 2.0 WORM GEAR
CLAMP, 2.0" WORM GEAR
CORD, DRAIN HOSE
COVER, REC. TANK
DOME, CLP FAMILY
FLOAT SHUT-OFF
GASKET, DOME
GASKET, PORT COVER
HOSE, 1.5 X 12.0 DRAIN
HOSE, INSERT
HOSEBARB, 1.5 DOUBLE MCHD
HOSE, CAP
PLUG, DRAIN HOSE
SCR, #10 X 3/4 PPHST TYPE B
TANK, CDT RECOVERY
BRKT, HOSE HOOK
BRKT, RECOVERY HOSE MTG
CORD, 99807 1/8 X 12"
LABEL, WARNING
LABEL, CADET MAIN
DOME ASM, CLP FAM
SERIAL NO.
FROM
1000083443
NOTES:
1000083443
1000083443
1000083443
5-16
5-17
PART NO.
PRV NO.
86001140
86001100
86000900
86004570
86004580
86026410
86258900
86003780
86001980
86230210
86007140
86007120
86026880
86007970
86003630
86003330
86006240
86135340
86135320
12514
11045
09019
44067
44068
65257
84179
35171
14700
14832
72130
72126
53789
73864
34351
28061
66227
14258
140687
DESCRIPTION
BRUSH, ASM, 15 IN
BELT, 180J6 MICRO-V
BEARING, 1.125ODX.500IDX.375
JET BODY, MINI PROMAX BODY
JET, MINI PROMAX 9504
PUMP ASM, 120V SHURFLO
VALVE ASM, 120V CLP FAMILY
GASKET, ACCESSORY PORT
BREAKER, 15A 250VAC 50 VDC
BREAKER, 6A VDE CIRCUIT
SWITCH, SPST 2-POSITION ROCKER
SWITCH, DPDT 3-POSITION ROCKER
VAC MOTOR ASM, CLP FAMILY
STRAINER, 3/8 IN. NPT 60 MESH
FLOAT, SHUT-OFF
DOME ASM, CLP FAM
PLUG, DRAIN HOSE
BRUSH SET, 120V 5.7 VAC, AMETEK
BRUSH SET, 120V VAC, WINDSOR
SERIAL #
FROM
1000166663
1000166663
*
*
NOTES: