Beruflich Dokumente
Kultur Dokumente
~ 30 mins
TOOLS
This document provides general instructions to set up your new computer at the office. Packages vary slightly,
therefore this is not a comprehensive guide. With this guide, any team member can have their desktop set up
in less than 30 minutes with no tools required. If you have any questions or concerns, please contact your local
field technician or the Wealth Management Help Desk at 1-877-551-6902. The minimum components this package contains includes:
Part
Quantity Part
HP Laptop (model 840 or 820)
1
65W Power Supply
HP Monitor (modelW2082a)
1
Cat5e network cable
HP Universal Docking Station
1
VGA to DisplayPort cable
Monitor Power Cord
1
HP Classic USB Keyboard
Surge Protector
1
HP Classic USB Mouse
Figure 1. Minimum components in this package.
Quantity
1
1
1
1
1
DANGER!
Risk of electrical shock present, ensure all devices are powered off prior to inserting or removing
plugs.
CAUTION!
Inserting cords into the incorrect place can result in equipment malfunction. All connections
require little to no effort when inserted properly, unless otherwise noted.
1.
Locate 65W docking station power supply
2.
Connect the three-pronged end of power supply to surge protector.
3.
Connect circular end of power supply to docking station
NOTE: Connection should be on the back of docking station, on far-right hand side.
4.
Turn power button on docking station.
Result: If power symbol illuminates, power cable is connected correctly.
NOTE: turn off docking station after testing
1.
Locate the monitor power cord
2.
Insert three-pronged end to surge protector
3.
Insert alternate end into back of monitor.
4.
Press power button on monitor
Result: A green light will illuminate on the bezel and a Check Video Cable message on the screen
NOTE: turn off monitor after testing
2.
Video Cable
a.
Locate VGA to DisplayPort
b.
Insert VGA end (blue plug) into back of monitor
c.
Hand tighten securing screws
d.
Connect DisplayPort plug into docking station. Plug is located on the back, next to the
network cable
CAUTION:
Damage to DisplayPort plugs if inserted incorrectly, plugs are asymmetrical and the side
with one corner clipped should be on top.
3.
Remaining Peripherals
a.
Locate Keyboard and Mouse
b.
Insert bother Keyboard and Mouse into individual USB ports
NOTE: Both keyboard and mouse have the same USB plug, and can be interchanged in the docking
station.