Sie sind auf Seite 1von 24

COMES SA

Leading manufacturer of equipment and spare parts


for chemical/petrochemical, gas & oil and nuclear industries

COMES S.A.

Index

Index

Values....... ........................................................................02
General presentation..................................................03
History.......................................................................04
Manufacturing Capability.............................................05
Quality...............................................................................06
Target Industries............................................................07
Products and Equipments...........................................09
References.....................................................................19

COMES S.A.

Values

Values
Tradition & Experience
With over 35 years of experience in producing pressure vessels, COMES
ensures manufacture in compliance with the customer requirements. We
gained wide experience in providing specific solutions with distinct
advantages in cost and performance for our customers.

Customer Value Creation


We aim to create long-term relationships by ensuring maximum satisfaction
to all our customers and by consistently generating value.

Quality & Professionalism


We are a reliable partner, creating value through outstanding service,
quality standards, technical capacities and high-performance operations.
Our customers benefit from a specialized team, always concerned to
satisfy the most exigent client requirements.

Respect for the Society, Economy &


Environment
We answer our customers requirements and expectations by promptly offering qualitative products and services, without harming the environment,
health and safety. We are concerned to find the best technique to create
the right balance between customer satisfaction and minimizing environmental impact.

Honesty & Integrity


We practice the highest ethical standards in all our transactions.
We promote transparent, reliable, open relationships and treat each client
according to COMES values.

COMES S.A.

General presentation

General presentation
COMES is a leading manufacturer of equipments and spare parts for chemical,
petrochemical, gas & oil and nuclear industries. Our mission is to answer our
customers requirements and expectations by promptly offering qualitative products
and services, without harming the environment, health and safety.

Founded in 1977, as Mechanical Plant of the


Chemical Complex of Synthetic Fibres and Yarns
Savinesti (UMCFFS), COMES was created as
a supplier of equipments and spare parts for
Savinesti Chemical Platform.

SC COMES SA is one of the leading Romanian


manufacturers of pressure vessels and
equipments. With over 35 years of tradition, we
apply especially for petrochemical, gas&oil and
nuclear industries.

Following the positive evolution after the buy-out


and modernization investments, COMES became
one of the main Romanian suppliers for heat
exchangers, pressure vessels (tanks,
reactors, boilers, etc.), fin tubes heat exchangers,
columns, hot water/steam boilers for
chemical, petrochemical and nuclear industry.

The products specific to our company are: heat


exchangers, tube bundles, air coolers with fin
tubes, columns with internals equipments (trays),
industrial boilers with steam/hot water,
reactors, condensers, vessel, tanks, Skids,
complex metallic structures, pump bodies.

SC COMES SA Savinesti is part of the industrial


Group of Companies CONEX IASI, one of the most
dynamic industrial groups in Romania.

The vessels are made of carbon steel, stainless


steel, duplex, superduplex, clad steel (stainless,
monel), Cu-Ni alloy.

COMES S.A.

History

History
1977

COMES S.A. Savinesti Neamt was founded the name of Mechanical Plant of the Chemical Complex of Synthetic Fibres and Yarns Savinesti.

1991

COMES S.A. was registered, under the 1213/20.11.1990 government law, as a joint stock
company and changed its name in COMES Savinesti (Mechanical Company for Special
Equipments).

2003

The year when COMES S.A. Savinesti becomes part of CONEX Group of Companies,
one of the most important industrial groups in Romania. Comes S.A. receives Quality
Management System autorization from CNCAN, for activities in nuclear industry.

2004

Comes S.A. earns Quality Management System Certification acc. to EN ISO 9001:2000,
by TV Thuringen. Comes S.A. obtains Certification according to 97/23 EC Norm, by
ISCIR CERT for designing and manufacturing of underpressure equipments.

2004-2005

A period when Comes S.A. begins to manufacture complex technological equipments


for Unit no. 2 for the Nuclear Plant Cernavoda (columns, tanks, heat exchangers,
vessels).

2005

Comes S.A. earns certification according to AD 2000-Merkblatt HP 0, TDR 201, AD


2000-Merkblatt HP 100R und DIN EN 729-2, 97/23 EC Norm by TV Sud Gruppe for
pressure vessels manufacturing.

2006

Comes S.A. receives Certification of Environmental and Occupational Health and Safety
System according to EN 14001:2005 and OHSAS 18001:2004 by SRAC and IQNet.

2009

U stamp authorization by Hartford Steam Boiler Inspection.

2015

The investment program (worth over 3 million Euro) on constructing the second Boiler
Shop has been developed and completed.

COMES S.A.

Capability

Manufacturing Capability
Mechanical processing shop:

Machining of parts with diameters up to 1000


mm and lengths up to 5000 mm, on normal
lathes.
Machining on carousel lathes of parts with
diameter up to 2500 mm and heights up to 1500
mm.
Machining on horizontal milling and boring
machines.
Portal milling machine of parts with lengths up
to 5000 mm, width of 1600 mm and heights of
1200 mm.
Machining on universal milling machine.
Machining on drilling machines.
Machining on radial drilling machines.

Primary sectors:



Oxy-gas cutting thickness up to: 120 mm.


Plasma cutting thickness up to: 45 mm.
Mechanical cutting.
Heat treatment post welding in furnace with
6 diesel burners, dimensions: 12000 x 5000 x
3750 mm.
INDUCAL Installation revealing installation by
medium, frequency (2800 Hz).

Test Laboratories:

Nondestructive tests: RT, UT, PT, MT.


Destructive tests: stretching tests, bending
tests, hardener tests and resilience tests.

Boiler shop:

Plate bending on ABKANT for max. thickness of


16 mm.
Plate Roll machine: type SERTOM MODEL for
max. thickness of 63 mm.
Tube bending at various radius and spatial
angles for diameters ranged between 16 and 60
mm.
Tube expanding in tube sheets using electrical
equipment control of torque during the expanding
and stop at a preestablished time, for tubes with
diameters ranged between 12 and 108 mm and
thickness between 1.5 and 4.6 mm.

Assembly through welding procedures:

MMA (SMAW) manual welding with shield electrodes.


TIG (GTAW) manual welding in inert gas
medium.
GTAW automatic orbital welding in pipe tube
plate.
SAF (SAW) submerged arc welding.
MIG-MAG (FCAW) welding wire for gas
shielded inert and active.

Surface protection:

Free blasting operations with metal grains, grid


or electro corundum.
Painting operations using AIRLESS equipment.
Pickling& passivation.

Software Tools



PV ELITE, AUTOCAD, ZWCAD;


Solid Works Simulation Professional; Solid Works Standard;
SANTAMBROGIO DESIGN SOFTWARE EN13445, AD200, ASME code;
AXIS VN12 Structural calculus; CC-STEADY STATE, CC-THERM, C.

COMES S.A.

Quality

Quality
Certifications and authorisations:










Management System Certification EN ISO 9001:2008, by TV Thuringen


Environmental System Certification acc. to SR EN ISO 14001:2005, issued by CertRom
Certificate for Occupational Health and Safety System SR OHSAS 18001:2008, issued by CertRom
Certificate for Design and Manufacturing of Pressure Equipments acc. to Directive 97/23 EC (GD
584/2004), issued by ISCIR CERT
Certificate of Authorization ASME code, U stamp, for Manufacturer of pressure vessels issued by
Hartford Steam Boiler Inspection & Insurance Company of Connecticut
Certification in compliance with the requirements from AD 2000 HP0; EN ISO 3834-2
ISCIR authorisation for assembling and repair of hot water/ steam boilers
ISCIR authorisation for assembling and repair of hot water/ steam piping
ISCIR authorisation for assembling and repair of pressure vessels
ISCIR authorisation for non-destructive laboratory with RT, MT, PT, UT(f,s,t), UT(g) examination
methods
Authorisation of radioactivity safety for products Barrels from stainless steel for radioactive
wastes intermediary storage

Available examinations:






Radiographic examinations
Ultrasonic examinations
Ultrasonic examination of forging and casting
Ultrasonic thickness measurement
Penetrant liquid examination
Magnetic particle examinations
Mechanical testing: tensile, impact, hardness, resilience, metallographic analyzes, etc

COMES S.A.

Target Industries

Petrochemical Industries









Heat Exchanger
Tube Bundles
Tanks
Fin Tube Heat Exchanger
Columns with Internals (trays with sieves,
bubbles)
Condensers
Reactors
Deaerators
Technological Equipments SKID type
Gas Separators

Nuclear Industries







Pressure Vessels
Heat Exchangers
Venting equipments
Steel Structures
Barrels
Forgings Parts
Hydraulic Cylinders
Heat Treatment Services

Power industries/ Thermal Plants


Hot Water / Steam Boiler: biofuel, wood,
shells, sunflower, gas, CLU
Preheaters, Boilers
Associated equipments for power plant:
scrubbers, expansion vessel, chimney,
piping, bunkers, feed screw, feed vessel

COMES S.A.

Target industries

Gas & Oil Industries





Air Coolers
SKID Units
Tanks, Vessels
Two-phasic/Three-phasic Separators

Steel & Iron Industries






Oven Cover
Skip Grab
Shaft, Rods, Pistons (rams)
Clips
Various Steel Items

Metallurgical & Concrete Industries






Bond piping;
Conveyors;
Steel structure with machining;
Chimney with platform;
Bene-skip, ladle roof, lifting device

COMES S.A.

Products & Equipments

Heat Exchangers
To achieve the technological processes of
heat transfer from one heat agent to another,
COMES can manufacture various items, under
the generic name of heat exchangers, namely:




Preheaters;
Coolers;
Condensers;
Vaporizer;
Economizer

Technical characteristics:




Diameter: 4500 mm;


Pressure: 150 bars;
Weight: 50 t.;
Length: 20 m.;
Shell thickness: 50 mm.

COMES S.A.

Products & Equipments

Materials:




Carbon steel;
Stainless steel;
Duplex/Superduplex;
Cu-Ni alloy;
Clad steel (stainless, monel).

COMES S.A.

Products & Equipments

Tube Bundles
The often replaced parts of a heat exchanger
are the tube bundles. Depending on the
constructive type of the heat exchanger, tube
bundles can be:


With floating head;


Tube bundle U type;
Tube bundle with stationary tube plates.

Technical characteristics:




Diameter: 4500 mm.;


Pressure: 150 bars;
Weight: 50 t.;
Tube diameter: 12 up to 76 mm;
Tube Plate thickness: 220 mm.

COMES S.A.

Products & Equipments

COMES S.A.

Products & Equipments

Air Coolers with Fin Tubes


They are heat exchangers used in chemical and
petrochemical industries, in heat transfer
processes with technological function of
condenser or vaporizer. The coolers are made of
tube bundles, arranged in bays, with two or more
fans, mounted on a steel structure.
The fin tubes which ensure the heat transfer can
be manufactured by extruded or embedded fins,
from:


Carbon steel and aluminium fins;


Copper and carbon steel fins;
Stainless steel with aluminium fins, etc.

Technical characteristics:


Diameter: 4500 mm;


Pressure: 150 bars;
Weight: 50 t.

The main parameters which define these heat


exchangers are:
Number of horizontal or vertical row;
Total surface of heat transfer;
Air flow free surface;

COMES S.A.

Products & Equipments

COMES S.A.

Products & Equipments

Tanks & Pressure Vessels


For storage or transport of liquid or
gaseous fluids such as basic, intermediate or
final material, COMES SA manufactures a large
range of items.
The tanks, due to technological process
requirement, could be:

Working at atmospheric pressure;


Working under pressure or vacuum;

Constructively, the items can be mounted


horizontal or vertical.

Technical characteristics:




Volume: up to 200 mc;


Diameter: 4500 mm;
Pressure: 150 bars;
Weight: 50 t.;
Shell thickness: 50 mm.

Materials:




Carbon steel;
Stainless steel;
Duplex/ Superduplex;
Cu-Ni alloy;
Clad steel (stainless, monel).

COMES S.A.

Products & Equipments

Separators

two-phasic
three-phasic

COMES manufactures gas separators for


separating the methane from the water, and
also two-phasic/ three-phasic separators for
separating the oil from the water and the gas.
This are horizontal or vertical tanks especially
designed to be used in the gas & oil industry.
Gas separators are mechanical devices
designed to remove and collect the solid and
liquid impurities existing in the gas flow and to
protect pipes, equipment and devices that may
be damaged because of contaminated gas.
In the case of gas separators (two-phasic),
separating is made by means of demister.
In the case of gas-oil-water separators (threephasic), separating is made by means of
chicanes, demister or coalescer.

COMES S.A.

Products & Equipments

Columns
Columns are chemical equipments used in
fractionation, distillation, adsorption operation, etc,
during technological process. Depending on the way
the phase contacts are made, columns are classified
in:


Contact elements continuously disposed


regulated form or other filling;
Contact elements discontinuously disposed
with trays;
Without contact elements with film or
pulverising.

Technical characteristics:



Diameter: 4500 mm;


Pressure: 150 bars;
Weight: 50 t.
Length: 30000 mm.

Materials:




Carbon steel;
Stainless steel;
Duplex/ Superduplex
Cu-Ni Alloy;
Clad Steel (stainless, monel).

Comes SA manufactures trays


for columns:


With bells;
With valves;
Sieves type as technical specifications.

COMES S.A.

Products & Equipments

Pump Bodies

Pump Bodies are subassamblies especially


designed to be used in the gas & oil industry.

We are qualified to manufacture the following items:








Discharge head;
Motor stool;
Column pipe;
Coupling guard;
Adapter;
Shell;
Bearing braket.

Materials:


Carbon steel;
Stainless steel;
Duplex/ Superduplex.

COMES S.A.

National References

National references

Petrobrazi Refinery

Pambac Bacau

Vega Ploiesti Refinery

Sofert Bacau

Petrotel Lukoil Refinery

General Transilvania

Cernavoda Nuclear Plant

Simcor Oradea

Ipip Ploiesti

Sugar Plant Oradea

Sinteza Oradea

CET Iasi

Arcelor Mittal Roman

Tess Conex

Arcelor Mittal Galati

Romgaz

Interagro SA - Ga Pro Co Savinesti Plant


Naval Yard Mangalia Daewoo
Petromidia Navodari
Carpatcement SA Cement Plant Bicaz
Kober SRL Turturesti
CET Arad
CET Pitesti
Rafo Onesti

COMES S.A.

National References

Naval Yard Orsova SA

CET Braila

ERG Cluj Napoca; Primex Cluj

Chemical Plant Nitramonia Fagaras

Intfor SA Galati

Viromet Victoria

Profiland Galati

Incdt Comoti

Power Complex Rovinari

Novi Consult Bucuresti

Power Complex Turceni

Fabro Corporation

Macon SA Deva

Dufa Romania

CET Mintia

Petrocart SA Piatra Neamt

Fe Deva

Dufa Romania

CET Paroseni

Petrocart SA Piatra Neamt

Ceramica Iasi

CET Suceava

Tmk Romania - Artrom SA Plant

TMK Romania - Resita SA Plant

Egger Radauti

COMES S.A.

Foreign References

Foreign references

Beneficiary

Country

Pichler Reifen GmbH;


Bertsch Energy;

Austria

GOMEL Chemical Plant;

Belarus

Egypt

West Delta Power Plant;


LMG International Corporation Ltd;
PRIMA Engineering for Technical Contracting;
Alexandria for Handling, Equipment and Spare Parts (ASP);

Neste Oil;

Finland

Projets Indus Internationaux, Et Breton- Pib Sarl;


Le Gaz Integral;
TOTAL France- Raffinerie La Provence (EPC Contractor
Realtec Groupe);

France

EWK Umwelttechnik GmbH;


L+K Anlagentechnik GmbH&Co;
SGL Group Carbon;
SPX Flow Technology;

Germany

Danieli Spa;
Foster Wheeler;

Italy

KAWASACHI;

Japan

COMES S.A.

Foreign References

Beneficiary

Country

Zarka Refinery (EPC Contractor Le GazIntegral);

Jordan

Atyrau Refinery (EPC Contractor Rominserv Bucuresti);

Kazahstan

General Company fo Chemical Industries- GCCI Abu


Khammash;

Lybia

INDORAMA Ventures BU;

Netherlands

LUKOIL (EPC Contractor Euro Gaz Sistem);


OEMK Metallurgical Plant;

Russia

GAZPROM NaftnaIndustrija SRBIJE A.D. Pancevo;


GAZPROM NaftnaIndustrija SRBIJE A.D. Novi Sad;

Serbia

Ewatherm AG;

Switzerland

Abu Dhabi Oil Refining Company Takreer (EPC Contractor


Alghanem);

UAE

Aden Refinery Co;

Yemen

COMES SA
COMES
SA
Street Uzinei no.1,
617410

SavinestiCaranfil
Neamt,
Romania
Gheorghe
no.3,
617410
Comercial register: J27/27/1991
Savinesti

Neamt,
Romania
VAT ID: RO 2662292
Tel:
Tel:+40-(0)233
+40-(0)233280601
281568 ; +40-(0)233 281207
Fax:+40-(0)233
+40-(0)233280585
281833
Fax:
www.comes.ro
www.comes.ro
E-mail: office@comes
E-mail: office@comes

Das könnte Ihnen auch gefallen