Sie sind auf Seite 1von 9

Teaching Plan

UNIVERSITI TEKNIKAL MALAYSIA MALAYSIA


FAKULTI KEJURUTERAAN MEKANIKAL

STATIK DAN MEKANIK BAHAN


STATICS AND MECHANICS OF MATERIALS
BMCG 1123

1.0

SEMESTER 1

SESSION 2016/2017

OBJECTIVES
The objective of this course is to develop students so that they will be able to analyze and resolve
forces in a mechanical system, able to determine stresses, strain and displacement in structure due
to load acting on them using basic concepts of force systems and solid mechanics.

2.0

LEARNING OUTCOMES
On successful completion of this course, student should be able to:
i.
ii.
iii.

3.0

State the basic concept of force and materials mechanics. (PO1,CTPS1-3,C1-2,P1-2,


A1-2)
Analyze the force on a mechanical system. (PO4, CTPS 1-3, C1-4, P1-3, A1-2)
Understand and elaborate the forces on a mechanical system. (PO4, CTPS 1-3, C1-4,
P1-3, A1-2)

SYNOPSIS
Statics
Introduction to basic concepts in statics and mechanics as a study of physical sciences, system of
units, scalars and vectors, free body diagram, forces system resultants and moments, equilibrium
of a particle, equilibrium of a rigid body, structural analysis, center of gravity and centroid.
Mechanics
Introduction to various type of structures, type of supports, concepts and definition of stress, strains,
torsion, shear force and bending moment, theory on axial loading, torsion, pure bending and beam
deflection, and combination of loads.

4.0

REFERENCES
Recommended textbook
a. Hibbeler R. C., 2014, Static and Mechanics of Materials, Fourth SI Edition, Pearson Prentice
Hall, Singapore.
General textbooks:
b. Morrow H.W. and Kokernak R.P., 2007, Statics and Strength of Materials, Pearson Prentice
Hall, New York.
c. Limbrunner G. F. and Spiegel L., 2009, Applied Statics and Strength of materials, Pearson
Prentice Hall, New York.
d. Riley W. F., Sturges L.D. and Morris D. H., 2002, Static and Mechanics of Materials: An
integrated Approach, 2nd Edition, John Wiley & Sons, New York

Fakulti Kejuruteraan Mekanikal


Universiti Teknikal Malaysia Melaka

1/9

5.0

COURSE IMPLEMENTATIONS
a. Lecture.
i. 3 hours per week for 14 weeks (Total = 42 hours)
b. Tutorials
i. 1 hours per week for 7 weeks (Total = 7 hours)

6.0

COURSE INSTRUCTIONS
Attendance is compulsory for lectures and should be more than 80% of the total contact hours.

7.0

COURSE EVALUATIONS

EXAM

COURSE
WORK

Criteria

Percentage (%)

ASSIGNMENT

1 Assignment

10

QUIZ

4 quizzes.
5 - 10 minutes.

10

MID-SEM EXAM

1 mid-semester examination.
1 hours.

20

FINAL EXAM

1 final examination.
3 hours.

60

TOTAL

8.0 COURSE CONTENTS


Week
Chapter/Date

Contents
STATICS

CHAPTER 1
General
Principles

CHAPTER 2
Force Vectors

2.1 Scalars and Vectors


2.2 Vectors Operation
2.3 Vectors Addition of Force
2.4 Addition of a System of Coplanar Forces

CHAPTER 3
Force System
Resultants

3.1 Moment of Force-Scalar Formulation


3.2 Principle of Moments
3.3 Moment of a Force about a Specified Axis
3.4 Moment of a Couple
3.5 Equivalent System
3.6 Resultant of a Force and Couple System

CHAPTER 4
Equilibrium of a
Rigid Body

5-6

CHAPTER 5

1.1
1.2
1.3
1.4
1.5

100

Remarks

Mechanics
Fundamental Concepts
Units of Measurements
The International System of Units
General Procedure for Analysis

QUIZ 1

4.1 Condition for Equilibrium


4.2 Equilibrium in Two Dimensions
4.3 Free Body Diagrams
4.4 Equations of Equilibrium
4.5 Two and Three Force Members
5.1 Simple Trusses
5.2 The Method of Joints

QUIZ 2

Fakulti Kejuruteraan Mekanikal


Universiti Teknikal Malaysia Melaka

2/9

Structural
Analysis
7

CHAPTER 6
Center of
Gravity and
Centroid

6.1 Center of Gravity and Centroid


6.2 Center of Gravity and Center of Mass for a
System of Particles
6.3 Center of Gravity, Center of Mass and Centroid
for a Body
6.4 Composite Bodies

MID-SEM
EXAM

MID SEMESTER BREAK (22 30 OCTOBER 2016)

9-10

CHAPTER 7
Stress
and Strains

11

CHAPTER 8
Mechanical
Properties of
Material

12

CHAPTER 9
Axial Load

13

CHAPTER 10
Torsion

14

5.3 Zero Force Members


5.4 The Method of Sections
5.5 Frames and Machines

CHAPTER 11
Bending

15
16
17 - 18

MECHANICS OF MATERIALS
7.1 Introduction
7.2 Stress
7.3 Average Normal Stress in an Axially Loaded Bar
7.4 Average Shear Stress
7.5 Allowable Stress
7.6 Design of Simple Connection
7.7 Deformation
7.8 Strain
8.1 The Tension and Compression Test
8.2 The Stress-Strain Diagram
8.3 Stress-Strain Behavior of Ductile and Brittle
Materials
8.4 Hookes Law
8.5 Strain Energy
8.6 Poissons Ratio
8.7 The Shear Stress-Strain Diagram
9.1 Saint-Venants Principle
9.2 Elastic Deformation of an Axially Loaded
Member
10.1 Torsional Deformation of a Circular Shaft
10.2 The Torsion Formula
10.3 Power Transmission
10.4 Angle of Twist
11.1 Bending Deformation of a Straight Member
11.2 The Flexure Formula
COURSE REVIEW
STUDY WEEK
FINAL EXAM WEEK

QUIZ 3

QUIZ 4

Fakulti Kejuruteraan Mekanikal


Universiti Teknikal Malaysia Melaka

3/9

9.0

SUBJECT EVALUATION REPORT FROM PREVIOUS SEMESTER


Subject

Session

Suggestion of Improvement
(current session)

Action Taken (next session)

BMCG 1123

Sem.1
2014/2015

Sem.1
2015/2016

(i) Allocate properly


contribution of course work
and mid-term exam to each
LO and PO
(ii) More assignments and
exercises especially on the
calculation using formula
and application of the
theory
(iii) Take care the students with
non-physic back-ground

10.0 COURSE STAFFS


a. Lecture Session & Tutorial
1BEKM
Coordinator & Lecturer
1) Prof. Madya Ahmad Rivai
Office tel.: 06-234 6748
Room: 8/5/21, Faculty of Mechanical Engineering, UTeM Technology Campus, Ayer Keroh.
Email : ahmadrivai@utem.edu.my

2) Dr. Nor Azmmi bin Masripan


Office tel.: 06-234 6576
Room: 3/5/ , Faculty of Mechanical Engineering, UTeM Technology Campus, Ayer Keroh.
Email : norazmmi@utem.edu.my

Fakulti Kejuruteraan Mekanikal


Universiti Teknikal Malaysia Melaka

4/9

TEACHING PLAN APPROVAL


Prepared By;

Approved By;

..
Name
: Ahmad Rivai
Position : Prof. Madya
Stamp
:

Dean/Deputy Dean (Academic)/Head of


Department
Stamp
:

Date

Date

: _____________________

: ____________________

TEACHING PLAN IMPLEMENTATION


(MID SEMESTER BREAK)
Comment:

Checked By;
..
Dean/Deputy Dean (Academic)/Head of Department
Stamp:

Date: ____________________

TEACHING PLAN IMPLEMENTATION


(WEEK 15)
Comment:

Checked By;
..
Dean/Deputy Dean (Academic)/Head of Department
Stamp:

Date: ____________________

Fakulti Kejuruteraan Mekanikal


Universiti Teknikal Malaysia Melaka

5/9

MATRIX OF LEARNING OUTCOMES VS PROGRAM OUTCOMES (FKE)


BIL

LEARNING OUTCOMES

P01 P02 P03 P04 P05 P06 P07 P08 P09

Delivery

Assessment

Lecture &
Tutorial

Quiz, Final Exam

1.

State the basic concept of force and


materials mechanics.

2.

Analyze the force on a mechanical


system.

Lecture &
Tutorial

Mid-sem Exam,
Final Exam

3.

Understand and elaborate the force


on a mechanical system.

Lecture &
Tutorial

Mid-sem Exam,
Assignment, Final
Exam

1 = Light

2 = Medium

3 = Heavy

Fakulti Kejuruteraan Mekanikal


Universiti Teknikal Malaysia Melaka

6/9

MATRIX LEARNING OUTCOMES VS KEMAHIRAN INSANIAH


CS Kemahiran Komunikasi
Communication Skill

CTPS Pemikiran Kritis dan Penyelesaian


Masalah
Critical Thinking and Problem Solving

TS Kerja Berpasukan
Teamwork Skill

LEARNING OUTCOMES

C
S
1

C
S
2

C
S
3

C
S
4

C
S
5

C
S
6

C
S
7

C
S
8

CT
PS
1

CT
PS
2

CT
PS
3

State the basic concept of


force and materials
mechanics.

Analyze the force on a


mechanical system.

Understand and elaborate


the force on a mechanical
system.

CT
PS
4

CT
PS
5

CT
PS
6

CT
PS
7

T
S
1

T
S
2

T
S
3

T
S
4

T
S
5

LL Pembelajara
n Berterusan
dan
Pengurusan
Maklumat
Lifelong
Learning and
Information
Management
LL
1

LL
2

LL
3

KK Kemahiran
Keusahawanan
Entrepreneurship

EM Etika
Profesional
dan Moral

K
K
1

E
M
1

K
K
2

K
K
3

K
K
4

E
M
2

E
M
3

LS Kemahiran
Kepimpinan
Leadership Skill

L
S
1

Fakulti Kejuruteraan Mekanikal


Universiti Teknikal Malaysia Melaka

7/9

L
S
2

L
S
3

L
S
4

MATRIX LEARNING OUTCOMES VS TAXONOMY

A5 Menghayati Nilai

A4 Mengorganisasi

A3 Menilai

A2 Memberi maklum
balas

Understand and elaborate the force


on a mechanical system.

A1 Menerima

P7 Lakuan Tulen

DOMAIN AFEKTIF

P6 Adaptasi

P5 Response ketara
kompleks

P4 Mekanisme

Analyze the force on a mechanical


system.

P2 Set

P1 Persepsi

C6 Penilaian

C5 Sintesis

State the basic concept of force and


materials mechanics.

LEARNING OUTCOMES

C4 Analisis

C2 Pemahaman

BIL

C3 Aplikasi

C1 Pengetahuan

DOMAIN KOGNITIF

P3 Response Bersepadu

ARAS TAKSONOMI PEMBELAJARAN


DOMAIN PSIKOMOTOR

Fakulti Kejuruteraan Mekanikal


Universiti Teknikal Malaysia Melaka

8/9

JAM PEMBELAJARAN PELAJAR (JPP)


KURSUS:

BMCG 1123 STATICS AND MECHANICS OF MATERIALS (3 KREDIT)

NO.

AKTIVITI PENGAJARAN DAN PEMBELAJARAN

JAM PEMBELAJARAN PELAJAR


(JPP)

(Pertemuan Bersemuka, Pertemuan Tidak Bersemuka dan Pembelajaran Kendiri)


1

Kuliah (3 jam kuliah/minggu + 2 jam persediaan/minggu) x 14 minggu

70

Tutorial (1 jam tutorial + 1 jam persediaan) x 7 minggu

14

(Penilaian, Penilaian Berterusan dan Pembelajaran Kendiri)


3

Kuiz (4 Kuiz x (0.5 jam + 2 jam persediaan))

10

Peperiksaan Pertengahan Semester (1 x (1.5 jam + 3 jam persediaan))

4.5

Tugasan (1 Tugasan x 2 Jam x 3 minggu persediaan)

Peperiksaan Akhir [(2.5 jam + 14 jam persediaan) x 1 ]

16.5

JUMLAH JPP

121

KREDIT (JPP 40 )

3.025 3.0

Fakulti Kejuruteraan Mekanikal


Universiti Teknikal Malaysia Melaka

9/9

Das könnte Ihnen auch gefallen