Beruflich Dokumente
Kultur Dokumente
MX-4000
MX-1000
THORN
Safety Products
EN54 Part 2EN54 Part 4
LPCB Ref.
NO. 143
1 12
2005/8/19
2 12
2005/8/19
MODULE/BOARD DESCRIPTIONS
REPEATERS
MPM800 TO DRIVE
20-WAY STATUS COMMAND MODULE
40-WAY ALARM/FAULT LED MODULE
80-WAY ALARM LED MODULE
XIOM800 16 I/O (UP TO 5 PER MPM800)
MIMIC PANELS
IOB800 8IN / 8OUT
SERIAL/PARALLEL PRINTERS
3 12
2005/8/19
TYCO/THORN
MX-4000/1000
4 12
2005/8/19
H1: A Loop
H2: B Loop
H3: Sounder 1 and Sounder 2 outputs
H4: Supervised input
H5: Unsupervised input
H6: Emergency alarm input
H7: Fault relay
H8: Alarm relay
H9: Remote Bus
H10: Factory test
H11: Factory test
Headers
JP1: OFF - Ground Fault link OFF
ON - Ground Fault link ON
Note: The maximum number of RBUS devices is
JP7: OFF - Emergency Alarm, fire LEDs ON,
limited by design considerations ie, MPM
has no effect on sounders
personality.
The RBUS must be terminated with a 150 resistor at the ON - Emergency Alarm fire LEDs ON, will
FIM and a 120 resistor at the last device on the RBUS. turn on sounders
JP11: Factory test
4.4.4.9 I/O BUS
JP12: Factory test
The I/O bus can drive up to 2 IOB800 Standard
JP10: Factory test
8IN/8OUT
Expansion boards (see Section 4.5.2). The bus is a 1-bit SOUNDER OPERATION
bidirectional
NORMAL
CLASS A
bus which is capable of addressing up to 24 I/O
JP6
Not fitted
Fitted
devices. It may be used to drive up to 16 off-board LEDs,
JP5
Fitted
Not fitted
JP4
Fitted
Not fitted
relays, etc. and to read up to 8 auxiliary inputs.
4.4.4.7 SERIAL PORTS
The FIM has 3 RS232 serial ports which are used for
communicating with the following:
COM1 - Serial printer.
COM2 - Configuration PC/Modem.
COM3 - ThornNet and FILNet
communications networks.
4.4.4.8 REMOTE BUS
This is an RS485 party-line asynchronous bus (maximum
length 1200m), driven by the FIM. As this bus can address
up to 16 peripherals, the unique address of any MPM on
the
bus must be set using a DIP switch.
JP3
JP2
Not fitted
Not fitted
Fitted
Fitted
5 12
2005/8/19
6 12
2005/8/19
MINERVA
MX-4000
MX-1000
THORN
Safety Products
EN54 Part 2EN54 Part 4
LPCB Ref.
NO.
143
MX LPCB EN54
396
BS5839:Pt.1
MX1000 1 MX
250
MX40002MX
44*250
PSB800 5A 24Vd.c.
FIM800 /12
MX
CPU800 32
IOB800
PSB800
EN54:pt.2
ODM80016 x 40
LCD5
OCM 800
LED /
2 2 LED
557.200.001
MX1000
557.200.002
MX1000
557.200.003
MX4000 2~4
557.200.004
MX4000 2~4
557.200.009
MX4000 2~4
557.202.006
IOB-800 (8/8) (Max. 24 I/O
)
557.202.007
XLM-800 2 MX
557.202.026
TLI-800 ThornNet & MX-NET
557.202.036
557.202.116
557.202.118
MX CONSYS
7 12
2005/8/19
24V
1.
2.
LED
250
#2
#1
DET*
IB
CP
DIM
RIM
CIM
LI800
DET
DET*
8 12
2005/8/19
(MX-Net or FILNet)
COM 1 RS232
COM 2 RS232
/ (IOB800s/TUD800)
x 2~4
x 2
PSB820
MPM800
20
40 / LED
80 LED
XIOM800 16 I/O
MIMIC PANELS
IOB800 8IN / 8OUT
PRINTERS
9 12
2005/8/19
TYCO/THORN
MX-4000/1000
10 12
2005/8/19
H1 A
H2 B
H3 12TOTAL2A
2.7K
H4 10K
H5
H6
4.4.4.8BUS
H7 24V2A
RS485 ( H8 24V2A
H9 BUS(1200)
1200)FIM
H10
16
H11
MPM
JP1 OFF--
ON--
JP7 OFF--LED
RBUS ie
MPM
ON--LED
RBUS150
FIM120RBUS
JP11
4.4.4.9BUS
JP12
2 IOB800
JP10
8IN/8OUT ( 4.5.2 ) 1
24 I/O
Class A
16 LED,
JP6
8
JP5
MPM
JP4
2 :
JP3
JP2
JP8 A
4.4.4.10
JP9 A
PL2
Class A
PL3 TLI800
SDR1+ ve SDR2+ve
PL4
SDR1- ve SDR2-ve
PL5
PL6 COM1
SDR2
PL8 COM2 PC/
SDR1 +veSDR2 +ve
PL10 COM3
JP8JP9
PL12
PL9 XLM800
PL11
PL13 OCM800
PL14 CPU
PL15 OCM800 ()
4.4.4.7
FIM3 RS232
COM1 --
COM2
COM3 --ThornNetFILNet
11 12
2005/8/19
MX 4000/1000 ()
32
44
17
12 12
2005/8/19