Beruflich Dokumente
Kultur Dokumente
uk
Cable Spiker
3
3
3
3
3
Key Features
Cable Spiker
The Cable Spikermanufactured by Accles & Shelvoke Ltd is a high quality durable safety tool used
worldwide. The tool was developed in 1952 in cooperation with the Central Electricity Generating
Board. The Cable Spiker is a cartridge powered tool which when fired drives a steel spike through high
voltage electricity cables short circuiting the power and making the cable dead and therefore safe to
work on.
The ACVOKE Cable Spiker is available as standard and heavy duty versions:
The standard Cable Spiker can accommodate cables up to
110mm diameter carrying voltages up to 275KV.
A heavy duty version is also available for cables up to 150mm
diameter carrying voltages up to 400KV.
Key features:
4
4
4
4
4
4
4
4
4
A high quality, durable safety tool is suitable for all cable designs,
penetrating every form of normally applied cable coverings.
Easy to assemble and simple to operate.
Safest tool available for assured cable de-energization
Employee safety achieved through positive remote operation
Remote Firing the tool uses a seven metre long lanyard and release
pin which when operated completely separates from the tool at the
moment of firing. This ensures total operator safety in the event of a
live cable being spiked.
Safety the tool has a unique self setting safety system which requires
the deliberate action of pressing the Safety Catch to its fire position.
This eliminates the risk of operator inadvertently firing the tool when
setting the firing mechanism.
Portability needs no external power source, the use of a blank
cartridge as the source of energy means the tool can be used anywhere.
Robust the tools sturdy construction ensures years of trouble free use.
Versatile the use of different cartridge strengths and various clamping
arrangements allows the tool to be used on a wide range of cables.
Key Features
Cable Spiker Jack
When spiking polymeric cables, difficulty can sometimes be experienced with
blade removal. The Cable Spiker Jack offers a simple and effective solution to
this problem.
Key features:
4 Easy blade withdrawal from polymeric cable.
4 Reduces operator fatigue.
4 Protects tool from unnecessary damage during removal.
4 Easy low cost modification to existing tool by manufacturer.
4 Fits standard tool (not available for Heavy Duty model).
Safety
Cable Spiker
A LIFE SAVER
SCOPE
When it is intended to work on any Electrical Power Cable, either for the purpose of carrying out repairs or for tapping or arranging
additional feeders, it is vital that special precautions be taken to secure the safety of the employees.
After the cable has been made dead and connected to earth at the point of supply, the cable is cut, usually by means of hacksaw
or cutters.
CRITERIA
It often happens that the cable to be cut is distant from the circuit disconnect, grouped with other cables and sometimes buried in
the ground. In order to avoid any possibility of a mistake and a live cable being cut, most authorities insist that a sequential rigid
four step procedure be followed which requires the disconnection of power at both circuit ends, identification of cable markers,
electronic instrumentation signal checks and finally cable mechanical spiking.
The authorities made the final step mandatory which requires that a wide iron spike be driven, either with a hammer or an
extended stick into the cable intended to be cut before allowing further work to proceed. If by any mischance a live cable is
spiked, the resulting high magnitude short circuit current should trip out the feeder circuit breaker.
SAFETY CONSIDERATIONS
This method was somewhat crude and there is grave danger to the employee carrying out the spiking operation, owing to the
sudden thrust of substantial electrical fault energy capable of exploding the cable and creating a high velocity deadly spray of
conductor, shield and/or sheath metal fragments. Even the sight of a fault flashover could cause permanent blindness.
SAFETY FEATURES
In order to enable the spiking operation to be carried out in perfect safety, the Accles & Shelvoke Cable Spiker has the great
advantage that it can be remotely controlled at the moment of firing by means of a lanyard (rope) release. The operator can thus
stand at a point of safety and if by chance a live cable is spiked, the damage will be local to the cable.
As the speed of penetration of the spiking punch is so rapid, it has been found in practice that even if a live cable is spiked, usually
no damage to the cable spiker results. If however, the fault current happens to be extremely high, it may be that the actual spiking
punch itself may suffer, but yet be capable of tripping a normally operating breaker.
This punch, is of course, easily replaceable and a spare can be fitted in a matter of seconds. An added feature of the Cable Spiker is
that the wide punch shears the cable partially or totally, depending on the cable size, hence reducing additional cable cutting effort.
APPLICATIONS
The Cable Spiker is suitable for use with all types and voltages of power cable including single and multiple conductor laminated,
polymeric, elastomeric, unshielded, shielded, concentric neutral, interlock armoured, steel wire armoured, leaded covered etc.,
designs in either fixed or portable installations.
PREVENTS ACCIDENTS
The Cable Spiker is a quality durable tool designed to positively electrically ground out any required power cable for definite
manpower accident prevention and life saving.
SERVICING INFORMATION
Servicing
Accles & Shelvoke provide a comprehensive service and repair facility where customers can have their Cable Spiker
serviced by our highly trained engineers:
4 As the fitting of most parts often requires detailed instructions or expert knowledge it is generally advisable to return
the Cable Spiker to Accles & Shelvoke where a full inspection and test can be carried out.
local distributor.
4 Service and repair facility is generally open to UK customers; overseas customers are advised to contact their
4 Customers are advised to contact Accles & Shelvoke direct on 0121 313 4567 to make arrangements to return
4 Quotation will be provided on inspection of the tool, listing service charges and replacement parts required.
If in doubt and you require further advice and information on the Cable Spiker please contact Accles & Shelvoke
direct or youre local Distributor.
Accles & Shelvoke Ltd
Selco Way, Off First Avenue, Minworth Industrial Estate, Sutton Coldfield, West Midlands, B76 1BA ENGLAND
Tel: +44 (0) 121 313 4567 Fax: +44 (0) 121 313 4569
Parts List
Cable Spiker
PART NO.
DESCRIPTION
2233
Standard Cable Spiker for use with steel wire armoured cable up to 110mm
2235
2234
Heavy Duty Cable Spiker for use with steel wire armoured cable up to 150mm
NOTE: Above come complete with lanyard and release pin, cleaning tool, cranked lever and instructions manual.
PART NO.
DESCRIPTION
2260
2191
PT.1430/9S
2238
PT.1430/9 EPR
2241
PT.1430/9T
SPARE PARTS
NOTE when ordered spare parts please state model and serial number of the tool.
2182
Barrel
2183
2184
4*
2185
Breech Block
5*
2186
Extractor
2187
7*
2188
Barrel Base
2189
2190
Cable Clamp
14*
2194
Breech cap
15
2195
16
2196
17
2197
18
2198
Firing Pin
19
2199
20*
2200
21
2202
Hammer Spring
22
2203
23
2204
24
2205
Hammer Button
25
2206
Stop Pin
26
2207
27
2208
28
2209
29
2210
30
2211
31
2212
Safety Catch
32
2213
33
2214
34
2215
Lanyard
35
2216
Piston Punch
36
2218
40
2222
Cleaner Complete
41*
Trunnion
42
2224
43
2225
Lever
NOTE!
Parts marked * are not available as spares, Accles & Shelvoke provide a service and
repair facility for replacement of these parts.
7920
7900
7900