Beruflich Dokumente
Kultur Dokumente
constructive solutions
Substrate preparation
Mixing
Care should be taken to ensure that Nitomortar FC(B) is
thoroughly mixed to produce a fully homogeneous paste.
The 'hardener' and 'base' components should be stirred
thoroughly in order to disperse any settlement before mixing
them together. The two components should be mixed together
in a 1:1 ratio, by volume, until a uniform consistency and grey
colour is achieved.
Application
Due to the easy workability of the product, a variety of
instruments such as trowel, scraper or filling knife can be
used. After mixing, material can be taken directly from the
can, or subdivided onto spot boards for individual applicators.
Nitomortar FC(B) can be overcoated with all epoxy coatings
after a minimum curing period of 24 hours. Prior to overcoating,
the fully cured surface should be dust-free.
Cleaning
Nitomortar FC(B) should be removed from tools, equipment
and mixers with Solvent 102* immediately after use.
Hardened material can only be removed mechanically.
Technical support
Properties
Nitomortar FC(B)*
Solids by weight
Compressive strength
Pot life
:
:
:
Drying time
Overcoating time
Colour
Chemical resistance
:
:
:
100%
70 N/mm2 @ 9 days
90 minutes @ 25C
45 minutes @ 35C
10 hours @ 25C
4 hours @ 35C
After 24 hour curing period
Grey
Resistant to oils, fats, petrol,
salt and sugar solution,
bleach, dilute mineral acids,
alkalis , white spirit.
Not resistant to xylene.
Nitomortar FC(B)*
Estimating
Precautions
Supply
Nitomortar FC(B)
Solvent 102
:
:
Shelf life
12 months if kept in unopened tins and stored in a dry place
away from direct sunlight.
Storage conditions
Limitations
Flash points
Solvent 102
33C
Important note
Fosroc products are guaranteed against defective materials and manufacture and are sold subject to its standard
Conditions for the Supply of Goods and Service. All Fosroc datasheets are updated on a regular basis. It is the users
responsibility to obtain the recent version. Refer to www.fosroc.com.
Al Gurg Fosroc
LLC
Post Box 657, Dubai
United Arab Emirates
www.fosroc.com
Head Office
telephone: (+9714) 2039699
Regional
email: agf@fosroc.com
offices
email:
email:
abudhabi@fosroc.com
bahrain@fosroc.com
Kuwait, Boodai
Oman, Al Amana
Qatar, Tadmur
telephone: 4817618
telephone: 24815080
telephone: 4500607
fax: 4832124
fax: 24817554
fax: 4500543
email: kuwait@fosroc.com
email: oman@fosroc.com
email: qatar@fosroc.com
UAE/0234/06/D