Beruflich Dokumente
Kultur Dokumente
ANALYSIS OF
GOVERNMENT OF INDIA
LYSIS OF RATES
FOR DELHI
(V0L.1)
2007
All rights reserved. No part of this publication, either in English or in Hindi, may be repr
any form or by any means, electronic or mechanical, including photocopy, recording or an
information storage and retrieval system, without permission, in writing, from the Director
(Works), CPWD, New Delhi. Photocopying of this book is strictly prohibited
A GOVERNMENT OF IND
Published by
DIRECTOR GENERAL (W
DIAL-A-BOOK
011-4175 8700
Price : Rs. 3000/- per set of two volumes (excluding postage and forwarding charges etc.
d & Marketed by
BOOK AGENCY
DISTRIBUTORS
-A-BOOK
-4175 8700
available at
FOREWORD
Central Public Works Department Analysis of Rates for Delhi is a very comprehensive an
useful document. It is based on scientific assessment of inputs of materials, labour and m
in various items of work normally encountered in a project.
It was first compiled in the year 1950, followed by publication or revisions in 1955, 1962,
1977, 1985 and 1997. Since publication of DAR, 1997, prices of labour and materials hav
substantial increase. Besides the increased cost, there has been a spurt of new construc
materials and introduction of mechanised construction techniques for speedier constructi
has necessitated revision of existing DAR, 1997 to include the above changes. According
Analysis of Rates for Delhi, 2007 has been prepared incorporating element of machinery
prefabricated building components, wherever applicable.
Earlier C.P.W.D. Analysis of Rates for Delhi was a confidential document and was issued
CPWD Officers and Government Departments only. In this age of transparency, we feel th
is an anachronism. Therefore, for the first time DAR, 2007 is being published as an open
and shall be available in two volumes. This will facilitate in obtaining feed back from the c
industry and the professionals for continuous updation and improvement in the documen
Although DAR, 2007 contains most of the items of DAR, 1997, analysis of items which ar
either obsolete or are not in use have been deleted. Similarly, analysis of many items hav
modified to correspond to items of DSR, 2007.
materials and new technologies in the construction sector have also b
of rates of many items also incorporate element of machinery instead of the lump sum pr
I wish to place on record the technical input and the effective coordination on the part of S
D.S.Sachdev, ADG(TD) and the efforts put in by Shri Suresh Kumar, CE(CSQ) and his te
officers in TAS unit in finalising DAR, 2007 in a record time.
I am sure that C.P.W.D. Analysis of Rates for Delhi, 2007 along with Delhi Schedule of Ra
2007 shall be a useful document to a number of departments, public sector undertakings
sector builders and architects etc.
New Delhi
February, 2008
REWORD
(K. Srinivasan)
DIRECTOR GENERAL (WORKS)
1 C.P.W.D. Analysis of Rates for Delhi, 2007 is the revised edition of C.P.W
Rates for Delhi, 1997.
2 DAR, 2007 incorporates most of the analysis of DAR, 1997 with all corre
date and will replace DAR, 1997.
3 DAR, 2007 is a bilingual document (Hindi version will follow).
4 DAR, 2007 is published in two volumes as under:
Volume Number
One
Two
5 Analysis of many items in DAR, 2007, which are either obsolete or are n
been deleted. Similarly, analysis of many items have been modified to co
of DSR, 2007. Several new analysis of items pertaining to new materials
technologies in the construction sector have also been included. Analysi
items also incorporate element of machinery instead of lump sum provis
6 Analysis have been modified to include execution of different works by u
electrical and mechanical equipments i.e. excavators, tower cranes, mob
mechanical platforms, Batch Mix plant, transit mixers and pumps, piling
cutters, chisels, chippers, hammers etc. Built-in provision has been take
of rates for new construction technology/ mechanisation.
PREFACE
revised edition of C.P.W.D. Analysis of
n will follow).
Sub-head No.
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
Contents/ Chapters
Basic Rates
Carriage of materials
Earth Work
Mortars
Concrete Work
Reinforced Cement Concrete Work
Brick Work
Stone Work
Marble Work
Wood and PVC Work
Steel Work
Flooring
Roofing
Finishing
Repairs to Buildings
Dismantling and Demolishing
Road Work
Sanitary Installation
Water Supply
Drainage
Pile Work
Aluminium Work
Water Proofing
Horticulture and Landscape
ncrete Work
New Delhi
February, 2008
sis of dry work using prefabricated materials and pre-finished elements for speedier
uction are included viz gypsum block walls, calcium silicate and non-asbestos cement
partitions, pre-finished counter tops for kitchen and washbasins, pre-moulded and
nished stone work in risers and treads of steps and window sills, dry stone cladding,
ames for windows, use of chemical and mechanical fasteners, laying of tiles in flooring
ado with polymer based adhesives etc.
2007 is based on the study of current market rates of materials at Delhi, collected
g the period of April, 2007 to October, 2007. Generally, the basic rates of materials,
orated in the analysis, pertain to materials conforming to BIS Standards/CPWD
fications/Materials of best quality available in the market.
ur rates are the minimum wages issued by the Government of Delhi w.e.f. 01-09-2007.
sum provision of labour/ T& P is replaced with mechanisation inputs. Prominent
incorporating mechanization are earth-work in excavation, RMC / BMC, brick work
erstructure above floor V level, road work, dismantling of R.C.C. work, dismantling
C. and flexible pavements, pile work etc.
er of uses of steel and wooden shuttering have been reduced from 80 and 16 times
and 8 times respectively, so that proper quality of shuttering is put to use.
actors profit and Overheads @ 15% ( CP=7.5% & OH 7.5%) has been adopted as
ved by the DGW vide Office Memorandum no. DG(W)MAN/150 dated 14-12-2007.
ies have been considered as 1.00 times based on Cost Index of Delhi as 100 over
01-10-2007.
of effort has gone into the preparation of this Analysis of Rates. I convey my
p appreciation and sincere thanks to Shri Suresh Kumar, CE, CSQ, Shri Mayank
, S.E. (TAS), Sh. S.K.Jain EE(S&S) I, Sh.S.C. Malik EE (S&S) -II,
A.V.R.Bhat EE (S&S) III, Sh. V.P.Singh AE, Sh. H.N.Singh AE, Sh. S.K.Sarkar
Sh.L.C.Gothwal AE, Sh.G.K. Jindal AE, Sh. S.S.Pal AE, Sh. Bahal Singh
an Gr-I, Sh Upender Walia D/Man Gr.-I and other officers and staff of TAS Unit
incere efforts made in the preparation of this document in such a short time.
are has been taken to print the C.P.W.D. Analysis of Rates for Delhi as correctly as
ble. It is, however possible that some errors might have crept in. In case any error or
Superintending Engineer
ion is noticed, it may be brought to the notice of the
), CPWD, Room no. 418, A- wing, Nirman Bhawan, New Delhi.
e of any discrepancy between English and Hindi versions, the English version shall
d valid. Suggestions for improvement are welcome.
(D.S.SACHDEV)
ADG (TD), CPWD,
Nirman Bhawan, New Delhi
I convey my
Shri Mayank
.K.Sarkar
of TAS Unit
short time.
New Delhi
SH. NO.
Contents
Vol. 1
PAGE NO.
1-2
3-4
5-47
48-50
51-60
61-104
105-115
117-145
147-198
199-227
229-280
281-292
293-431
433-461
463-517
519-578
BASIC
RATES
BASIC RATES
0.1 HIRE CHARGES OF PLANTS
Code
No
Description
Unit
0001
Day
0002
Day
0003
0004
cum
0005
0006
Day
Day
0007
0008
0009
Day
Day
cum
Day
Day
0012
0013
0014
0016
0017
Day
Day
Day
Day
0018
0019
0020
Day
Day
Day
0021
0022
0024
Pin vibrator
Day
Surface Vibrator
Day
Hire and running charges of hydraulic piling rig
with power unit etc.
including complete accessories and shifting at per day
site.
Hire and running charges of light crane.
per day
0010
0011
0025
0026
0027
Day
per day
0029
0030
per day
0028
per day
per day
km/ cum
0033
0037
0038
0039
Paint applicator.
Mobile crane.
Tractor with ripper attachment.
Tractor with trolley.
0040
0041
0042
0043
0045
0046
0047
0048
0100
0101
day
day
day
day
Day
Day
0102
0103
0111
0112
Day
Day
Day
Day
0113
0114
0115
Chowkidar
Beldar
Coolie
Day
Day
Day
0116
0117
0119
0122
Fitter (grade 1)
Assistant Fitter or 2nd class Fitter
Glazier
Mason (for plaster of paris work) 1st class
Day
Day
Day
Day
0123
0124
0125
Day
Day
Day
0126
0127
0128
0130
0131
0132
0133
Mistry
Painter
Rock Excavator
Rock Breaker
Day
Day
Day
Day
0134
0135
0138
Day
Day
Day
0139
0141
0155*
0157
0159
0222
Day
Day
Day
Day
Day
10 Nos
0223
0224
0225
0226
per day
per day
per day
per day
leads for
day
per day
day
day
0227
0228
0229
0230
metre
0231
each
0232
0233
0234
0235
0236
0237
0285
0286
0287
0291
0292
0293
0294
0295
0296
0297
0298
cement
unserrated metre
each
sqm
sqm
cum
0302
0304
0305
0308
0309
0310
metre
cum
score
quintal
tonne
tonne
0312
0313
M.T.
0314
0316
0317
0318
0322
tonne
kilogram
litre
0324
Coal Tar
litre
0325
0326
0328
Blasting powder
Blasting fuse (fuse wire)
White face insulating board:12 mm thick
kilogram
each
sqm
0332
0336
sqm
sqm
0339
0341
0346
sqm
sqm
0362
0364
0365
0367
0368
Soft brush
Portland Cement
White Cement
0370
0373
0378
Coal (steam)
quintal
Cramp Gun metal 25x6x300 mm
each
Brass butt hinges (light/ordinary type) : 125x70x4 10 Nos
mm
Brass butt hinges (light/ordinary type) : 100x70x4 10 Nos
mm
0347
0348
0379
0380
each
tonne
tonne
10 Nos
0385
10 Nos
0386
10 Nos
0387
10 Nos
0388
10 Nos
0389
0390
0391
each
each
each
0392
0393
0394
each
each
each
0400
0401
each
each
0381
0382
0383
0384
10 Nos
10 Nos
10 Nos
10 Nos
0402
0403
each
each
0404
0405
0406
each
each
each
0408
0409
0410
each
each
each
0411
0412
0413
each
each
0417
0418
0419
0420
each
10 Nos
10 Nos
10 Nos
0421
0422
0423
0424
0427
0428
0429
0430
0431
10 Nos
each
10 Nos
0432
10 Nos
0433
10 Nos
0438
0442
each
each
0444
0445
0446
metre
metre
each
0447
each
0449
0450
0451
Brass screws 50 mm
Brass screws 40 mm
Brass screws 30 mm
100 Nos
100 Nos
100 Nos
0452
0453
0524
Brass screws 25 mm
100 Nos
Brass screws 20 mm
100 Nos
Chromium plated Brass butt hinges (heavy) type
75x65x4 .0 mm
(200gms)
10 Nos
0414
0425
0426
each
each
0525
0526
0527
0528
0555
0556
0557
0558
0568
0569
0570
0571
Chromium
plated
Brass
(light/ordinary) type 125x70x4
mm
butt
Chromium
plated
Brass
butt
(light/ordinary) type 100x70x4
mm
Chromium plated Brass
butt
(light/ordinary) type 75x40x2.5
mm
Chromium plated Brass
butt
(light/ordinary) type 50x40x2.5
mm
Chromium plated Brass handles 125
plate 175 x32 mm
Chromium plated Brass handles 100
plate 150 x 32 mm
hinges
10 Nos
hinges
hinges
hinges
10 Nos
10 Nos
10 Nos
mm with Each
mm with Each
Each
each
each
each
each
0583
0584
0585
100 Nos
0586
0587
0588
0589
100 Nos
100 Nos
100 Nos
100 Nos
0590
0591
0592
0594
0595
0596
0597
0608
10 Nos
10 Nos
10 Nos
10 Nos
piano hinges 1 mm thick metre
0635
Bright finished
screws 50 mm
0637
Bright finished
screws 40 mm
Bright finished
screws 30 mm
Bright finished
screws 25 mm
0638
0639
0640
0642
0643
10 Nos
0644
10 Nos
0645
10 Nos
0646
Oxidised
mild
steel
parliamentary 10 Nos
hinges150x125x27x2.8 mm
Oxidised mild steel parliamentary
hinges 10 Nos
125x125x27x2.8 mm
0641
0647
0648
0649
0650
0651
0652
0653
0654
0660
0661
each
0662
0663
each
each
0664
Oxidised mild
250x10 mm
Oxidised mild
200x10 mm
Oxidised mild
150x10 mm
Oxidised mild
100x10 mm
0655
0656
0665
0666
0667
0668
0669
each
metre
each
type) each
type) each
type) each
type) each
each
each
0670
0679
0682
0683
0684
0685
100 Nos
100 Nos
100 Nos
0686
0687
100 Nos
10 Nos
0688
10 Nos
0689
10 Nos
0690
0691
10 Nos
0692
10 Nos
0693
0694
0696
0680
0681
0697
0698
0699
0700
0701
0702
0703
0704
0705
0706
0713
0714
0715
Anodised
Aluminium
type)300x10 mm
Anodised
Aluminium
type)250x10 mm
Anodised
Aluminium
type)200x10 mm
each
door
door
tower
bolt
(barrel 10 Nos
tower
bolt
(barrel 10 Nos
tower
bolt
(barrel 10 Nos
bolt
(barrel 10 Nos
bolt
(barrel 10 Nos
Anodised
Aluminium
tower
type)150x10 mm
Anodised
Aluminium
tower
type)100x10 mm
Anodised Aluminium handles 125
175 x 32 mm
Anodised Aluminium handles 100
150 x 32 mm
cm each
with teak
with teak
sqm
sqm
with teak
sqm
0717
0718
0719
0752
0753
0754
0755
Block board
construction flush door with
commercial ply on both faces
35 mm thick
sqm
Block board
construction flush door with
commercial ply on both faces
30 mm thick
sqm
Block board
construction flush door with
commercial ply on both faces
25 mm thick
sqm
Block board construction flush door lipping
sqm of
door area
Square vision panel in Block board construction sqm of
flush door
door area
Circular vision panel in Block board construction Sqm of
flush door
door area
Decorative
type Louvers in Block
construction flush door
board sqm of
0759
0761
door area
Rebate cutting in Block board construction flush sqm of
door
door area
Decorative plywood 4 mm
sqm
Fuel wood
quintal
0763
0765
0768
0769
Glue
Hessian cloth
Cement Concrete Jali 50 mm thick
Cement Concrete Jali 40 mm thick
kilogram
sqm
sqm
sqm
0770
0771
0773
sqm
litre
quintal
0775
0776
0777
0784
quintal
quintal
quintal
cum
0785
0810
0811
0815
0816
Mud (dry)
cum
Dry distemper
kilogram
Oil bound washable distemper/ Acrylic distemper kilogram
0818
litre
0820
0821
0823
Cement primer
Distemper primer
Pink primer (for wood)
litre
litre
litre
0826
0827
0828
0829
Aluminium paint
Acid proof paint (chocolate or black)
Anticorrosive bituminous paint (black)
Black Japan
litre
litre
litre
litre
0830
0831
0833
Enamel paint
litre
Floor enamel paint in all shades except green
litre
Synthetic enamel paint in black or chocolate litre
shade
0757
0788
0834
litre
0835
0845
0850
0851
0855
0856
0857
0858
0859
litre
litre
litre
0863
0865
0868
0869
kilogram
kilogram
kg
kilogram
0870
0873
0874
Plug
Copper pins 6 mm dia 7.5 cm long
Black colour dark shade pigment
each
each
kilogram
0875
0876
0886
0966
0967
0969
0973
0974
0975
litre
litre
kilogram
kilogram
kilogram
litre
kilogram
kilogram
each
each
kilogram
Pulley 25 mm dia
each
Rolling shutter made of 80x1.25 mm machine sqm
rolled laths
Top cover for rolling shutters
metre
each
0979
0980
0982
0983
0992
cum
cum
cum
quintal
0994
0996
sqm
sqm
0999
1000
Shellac
Spirit
kilogram
litre
1001
1002
1003
1004
Spun yarn
Mild steel round bar 12 mm dia and below
Mild steel round bar above 12 mm dia
Average rate of Mild steel round bars for
reinforcements
kilogram
quintal
quintal
quintal
0976
0977
0978
each
sqm
sqm
cum
1005
1006
1007
1008
1009
1010
1013
Flats up to 10 mm in thickness
Flats exceeding 10 mm in thickness
Mild steel plates
Mild steel sheets for tanks
quintal
quintal
quintal
quintal
1015
1019
1020
sqm
each
quintal
1021
1022
sqm
1028
1029
1030
Straining bolts
Galvanised steel barbed wire
Galvanised steel turn buckles
each
quintal
each
1031
1034
1035
1036
1143
1145
1149
1151
each
metre
metre
metre
each
1154
100 Nos
1157
1158
1159
1160
cum
cum
cum
10 cudm
1161
1163
1164
1165
1166
1168
1023
1024
1025
1032
1169
1174
10 Nos
10 Nos
each
10 Nos
each
each
quintal
quintal
sqm
sqm
1175
1177
1179
1186
1187
1188
1189
1190
1194
10 cudm
10 cudm
10 cudm
1196
1197
1198
1199
10 cudm
10 cudm
10 cudm
10 cudm
1201
sqm
1202
sqm
1203
1207
100 Nos
1208
1209
1210
1211
1213
Bitumen washer
G.I. plain washer thick
G.I. plain washer thin
G.I. plain washer for seam bolts
Water proofing materials
100 Nos
100 Nos
100 Nos
100 Nos
kilogram
1214
1215
1216
cm
cm
quintal
1219
1220
1221
1222
Wire nails
Wire mesh (rabbit)
20 mm dia holding down bolts
Mild steel sheets with bolts and nuts to rest on
pintels
kilogram
sqm
quintal
each
1224
1225
1227
1228
1229
1231
1234
1235
1237
sqm
quintal
quintal
thick(light sqm
sqm
sqm
10 cudm
metre
1238
Diesel oil
litre
Cutting marble or sand stone slab up to 50 mm
thick by mechanical
device
metre
Extra for selected planks of first class teakwood 10 cudm
1241
kg
1301
Bleaching powder
quintal
1304
1305
each
each
1307
1309
1314
1315
each
pair
each
each
1330
1331
1332
1334
1336
1337
1339
1340
1342
1343
1350
1352
1353
1335
1354
1355
each
each
each
each
1356
1357
1360
each
1361
1362
1363
each
each
pair
1364
1366
1367
1369
each
each
each
each
1373
1374
1375
each
each
each
1376
1377
1378
1379
pipe joints
pipe joints
pipe joints
pipe joints
each
each
each
each
1380
1381
1382
each
each
each
1383
1384
1392
1396
each
each
each
each
1397
1464
1466
1468
1470
1472
1532
1533
1534
1535
1540
1541
1542
Pig lead
kilogram
S & S.C.I.standard specials up to 300 mm dia quintal
(heavy class)
S & S.C.I.standard specials over 300 mm dia quintal
(heavy class)
Flanged C.I. standard specials up to 300 mm quintal
dia(heavy class)
Flanged C.I. standard specials over 300 mm quintal
dia(heavy class)
Casing pipe 100 mm dia
metre
Flush pipe with union spreaders and clamps all in
C.P. brass for
single stall
Flush pipe with union spreaders and clamps all in
C.P. brass for
double stall
Flush pipe with union spreaders and clamps all in
C.P. brass for
range of three stall
Flush pipe with union spreaders and clamps all in
C.P. brass for
range of four stall
Flush pipe and spreaders G.I.for single set of one
squatting plate urinal each
Flush pipe and spreaders G.I.for range of two
squatting plates urinal
each
each
each
each
each
1545
1546
1547
1548
1549
metre
metre
metre
metre
1550
1551
1552
metre
metre
metre
1555
1559
1608
1612
each
each
each
each
1614
1616
1543
1617
1618
1620
1621
1622
1624
1625
1627
1628
1630
1631
1633
each
1639
1640
1641
1642
each
each
each
each
1643
1644
1645
each
each
each
1646
1647
1648
1649
1653
1634
1636
1637
1656
1659
1662
1666
1667
1669
1670
1672
1673
1674
1677
1682
each
each
each
each
each
each
each
each
each
each
each
of required
of required
of required
of required
each
each
each
each
each
1683
1685
1686
1687
1688
1689
each
1693
1700
1701
1702
1703
1704
metre
metre
metre
1705
1706
1707
1709
metre
metre
metre
metre
1710
1711
1712
1713
1714
metre
metre
metre
metre
each
1715
1716
1717
1718
R.C.C.
R.C.C.
R.C.C.
R.C.C.
each
each
each
each
1719
1720
1721
each
each
each
1723
1724
1725
each
each
each
1726
1727
1854
each
each
each
1690
1855
1856
1857
1858
1859
1863
each
1871
1872
1875
1876
1878
1879
1881
1882
1885
1889
1891
1893
1895
1896
1897
1900
1902
1904
1913
1915
1922
1898
1923
1924
1927
1928
1929
1930
1931
1932
1933
1934
1935
each
each
each
each
Brass full way valve with C.I. wheel (screwed end) each
25 mm dia
Brass full way valve with C.I. wheel (screwed end) each
32 mm dia
Brass full way valve with C.I. wheel (screwed end) each
40 mm dia
Brass full way valve with C.I. wheel (screwed end)
50 mm dia
Brass full way valve with C.I. wheel (screwed end)
65 mm dia
Brass full way valve with C.I. wheel (screwed end)
80 mm dia
Gunmetal non-return valve-horizontal (screwed
end) 25 mm dia
each
each
each
each
1936
1937
1940
1941
1942
1943
1944
1945
1947
1938
1949
1950
1951
1952
1953
each
each
each
1954
each
1955
1956
1957
1958
each
each
each
each
1959
1960
1961
each
each
each
1962
1963
1964
1965
each
each
each
1970
1980
1984
1986
Fly ash
F.P.S. bricks tile class designation 100
Modular bricks class designation75
cum
1000 Nos
1000 Nos
2391
Strips-Aluminium
fluted 3.15mm thick and metre
150mm wide
Strips Aluminium fluted 3.15mm thick
and Metre
200mm wide metre
Float glass sheet of nominal thickness 4 mm
(weight not less than
10kg/sqm).
sqm
Float glass sheet of nominal thickness 5.5 mm.
(weight not less than
2392
2406
2407
each
pair
2412
2447
2449
2451
2452
2453
2454
2455
2456
2459
13.50 kg/sqm).
sqm
Ply wood 5 ply with commercial ply on both faces sqm
6 mm thick
Hollock ballies 125 mm diameter
Oxidised mild steel pull bolt lock (locking bolt)
size 85 mm x 42 mm
with screws, bolts, nuts and washers complete
Brass cupboard lock 6 levers (best make
approved quality) 40 mm
size
Brass cupboard lock 6 levers (best make
approved quality) 50 mm
size
Brass cupboard lock 6 levers (best make
approved quality) 65 mm
size
of
of
of
of
metre
each
each
each
each
each
each
each
each
2464
2465
2466
2467
2468
2469
2470
2471
2480
2481
2504
2505
2602
2603
2704
2710
2500
each
each
each
2483
each
10 cudm
sqm
sqm
10 cudm
cum
10 cudm
1000 Nos
1000 Nos
kilogram
2750
2751
2901
2902
2903
2904
2908
crazy flooring
8 mm thick granite stone tiles (mirror polished of
all shades)
8 mm thick marble tiles (polished) Raj Nagar
Stone Aggregate (Single size) : 100 mm nominal
size
quintal
sqm
sqm
cum
cum
2914
2916
3002
Solvent
Paving Asphalt 80/100 penetration
Polyvinyl chloride sheet 400 micron thick
kilogram
tonne
sqm
3004
3050
3080
each
quintal
each
2909
2910
2911
3084
3088
3092
3096
3213
cum
cum
cum
each
each
3311
each
3314
each
3317
each
3320
each
3321
each
3326
each
3617
each
3228
3229
3300
each
each
each
3620
3624
3625
3628
3629
3634
each
each
each
3635
each
3640
3621
3641
each
each
each
each
3644
3645
3650
3651
3654
3655
3660
3664
3670
3674
3681
3682
3685
3686
3690
3695
3699
3707
each
each
each
each
each
each
each
each
each
each
each
3708
each
3712
each
3713
each
3716
3717
each
each
3728
3729
3733
each
each
each
3734
3738
each
3739
3746
3747
3749
each
each
each
each
3860
3861
4006
4007
4008
4009
4010
4011
4012
4013
4014
each
metre
metre
kilogram
kilogram
4201
4202
4203
4204
4205
4206
4207
Hydrochloric acid
Copper chloride
Copper nitrate
Ammonium chloride
5001
6001
Mobil oil
litre
White marble slab Makrana second quality plain sqm
veined 18 mm thick
Pink marble slab plain 18mm thick
sqm
6007
6010
6019
6501
7001
7003
kilogram
kilogram
kilogram
kilogram
sqm
sqm
cum
each
7004
7005
7006
and lock
each
Vitreous china flat back wash basin 450x300 each
mm
Vitreous china 10 litres low level cistern without each
fittings
7008
7009
7010
7011
7012
7013
Ceiling sections
Perimeter channel
Intermediate channel
Ceiling angle
metre
metre
metre
metre
7014
7015
7016
Connecting clips
Soffit cleat
Joint filler
each
each
kilogram
7017
7018
7019
7020
Joint finisher
Joint tape roll
Dash fastener/ Chemical fastener
All drive screws ( for gypsum board)
kilogram
roll
each
100 Nos
7021
7022
7023
litre
litre
each
7024
7027
7029
tonne
10 Nos
7032
7034
7035
7036
7040
7042
sqm
sqm
metre
7044
7045
7046
7047
7048
7049
7055
7043
7056
7059
7060
metre
metre
each
metre
sqm
metre
each
each
7063
7064
7065
7068
7070
7071
7077
7087
7090
7091
7095
7096
7097
7098
7101
7102
7103
7104
each
each
each
sqm
sqm
sqm
each
each
each
each
each
each
each
each
7105
7106
7107
Rate
Rs.
595.00
400.00
1000.00
200.00
1008.00
173.00
250.00
7050.00
80.00
500.00
300.00
200.00
200.00
6000.00
515.00
1030.00
800.00
100.00
6000.00
288.00
330.00
28000.00
2000.00
4000.00
28000.00
8000.00
18.00
1600.00
680.00
5000.00
1000.00
1000.00
1600.00
800.00
88000.00
480.00
12000.00
800.00
800.00
800.00
138.45
138.45
151.50
141.60
151.50
141.60
135.25
135.25
135.25
151.50
141.60
141.60
151.50
151.50
141.60
141.60
151.50
151.50
138.45
151.50
141.60
135.25
135.25
135.25
138.45
138.45
30.00
205.00
203.00
174.00
188.00
138.45
138.45
146.55
166.00
151.50
195.00
126.00
93.00
197.00
267.00
232.00
84.00
275.00
161.00
180.00
239.00
350.00
355.00
360.00
600.00
625.00
650.00
675.00
700.00
700.00
700.00
750.00
29.00
510.00
192.00
200.00
22500.00
19500.00
30000.00
25000.00
20.00
28.00
300.00
45.00
45.00
16.00
25.00
10.00
239.00
175.00
208.00
279.00
258.00
198.00
102.00
366.00
253.00
15.00
12.00
4500.00
9700.00
300.00
53.00
450.00
300.00
160.00
90.00
1500.00
1300.00
450.00
1650.00
1450.00
1175.00
888.00
200.00
158.00
106.00
317.00
216.00
173.00
123.00
100.00
75.00
51.00
84.00
65.00
44.00
85.00
75.00
55.00
85.00
82.00
257.00
235.00
104.00
457.00
423.00
390.00
364.00
300.00
26.00
66.00
55.00
46.00
73.00
109.00
128.00
13.00
458.00
378.00
300.00
338.00
185.00
63.00
79.00
24.00
18.00
107.00
96.00
86.00
76.00
53.00
430.00
433.00
385.00
135.00
105.00
92.00
79.00
68.00
323.00
55.00
73.00
67.00
56.00
383.00
25.00
123.00
150.00
90.00
83.00
63.00
122.00
143.00
239.00
78.00
54.00
34.00
28.00
21.00
40.00
30.00
24.00
15.00
15.00
4.00
92.00
53.00
32.00
27.00
255.00
205.00
165.00
122.00
71.00
66.00
51.00
73.00
63.00
47.00
24.00
45.00
37.00
25.00
25.00
25.00
21.00
17.00
12.00
7.00
5.00
3.00
79.00
70.00
52.00
40.00
35.00
24.00
16.00
15.00
478.00
447.00
416.00
390.00
354.00
281.00
215.00
98.00
125.00
104.00
520.00
440.00
354.00
281.00
208.00
375.00
260.00
208.00
94.00
1100.00
1050.00
1000.00
632.00
610.00
600.00
245.00
86.00
118.00
210.00
250.00
265.00
50.00
10.00
145.00
115.00
92.00
19.00
260.00
295.00
178.00
177.00
800.00
115.00
115.00
310.00
20.00
26.00
40.00
80.00
70.00
73.00
72.00
89.00
93.00
52.00
65.00
115.00
100.00
115.00
57.00
120.00
140.00
95.00
60.00
36.00
150.00
49.00
100.00
105.00
60.00
24.00
58.00
5.20
2.50
6.00
7.50
42.00
65.00
45.00
20.00
222.00
195.00
18.00
767.00
400.00
170.00
280.00
400.00
450.00
11.00
60.00
600.00
320.00
3450.00
103.00
120.00
192.00
37.00
30.00
3100.00
3050.00
3075.00
3175.00
3175.00
3100.00
2900.00
2875.00
3400.00
3475.00
200.00
22.00
3500.00
310.00
9.00
58.00
7.00
18.00
50.00
4400.00
9.00
13.00
9.00
4300.00
4300.00
28.00
15.00
78.00
6.00
46.00
970.00
332.00
332.00
700.00
45.00
50.00
256.00
120.00
140.00
97.00
239.00
150.00
145.00
160.00
717.00
675.00
895.00
492.00
506.00
394.00
410.00
335.00
186.00
160.00
178.00
218.00
198.00
175.00
170.00
20.00
18.00
27.00
20.00
21.00
20.00
1.00
1.00
329.00
40.00
38.00
3800.00
75.00
3100.00
2900.00
230.00
200.00
170.00
72.00
105.00
30.25
6.00
80.00
35.00
1550.00
72.00
140.00
185.00
48.00
21.00
22.00
28.00
13.00
11.00
20.00
25.00
37.00
41.00
157.00
193.00
157.00
193.00
23.00
265.00
170.00
1395.00
844.00
4257.00
2129.00
80.00
114.00
156.00
79.00
10.00
19.00
23.00
10.00
9.00
12.00
13.00
15.00
20.00
30.00
38.00
45.00
66.00
83.00
106.00
118.00
249.00
527.00
58.00
2400.00
2595.00
4320.00
4772.00
292.00
204.00
333.00
415.00
465.00
138.00
203.00
255.00
320.00
58.00
77.00
109.00
140.00
160.00
211.00
269.00
355.00
5.00
15.00
38.00
215.00
50.00
537.00
610.00
1205.00
140.00
178.00
407.00
161.00
194.00
205.00
265.00
224.00
297.00
296.00
394.00
333.00
417.00
109.00
152.00
32.00
50.00
59.00
73.00
108.00
158.00
324.00
392.00
4.00
288.00
321.00
423.00
453.00
165.00
197.00
239.00
321.00
314.00
422.00
382.00
458.00
211.00
291.00
82.00
110.00
18.00
25.00
25.00
35.00
450.00
118.00
135.00
157.00
228.00
333.00
398.00
642.00
719.00
836.00
986.00
1243.00
1500.00
1543.00
16.00
21.00
34.00
42.00
63.00
73.00
92.00
102.00
146.00
178.00
210.00
241.00
280.00
30.00
42.00
80.00
85.00
113.00
165.00
1192.00
664.00
1400.00
275.00
250.00
28.00
40.00
30.00
405.00
103.00
70.00
125.00
158.00
99.00
260.00
221.00
164.00
55.00
86.00
160.00
380.00
610.00
175.00
260.00
300.00
235.00
296.00
330.00
483.00
700.00
1160.00
238.00
305.00
410.00
618.00
1085.00
1540.00
1890.00
2365.00
2840.00
5405.00
8050.00
9920.00
585.00
540.00
347.00
48.00
53.00
290.00
700.00
554.00
8.00
8.00
12.00
12.00
12.00
13.00
24.00
26.00
30.00
796.00
80.00
6.00
1950.00
2700.00
216.00
288.00
248.00
340.00
282.00
27.00
27.00
36.00
43.00
55.00
70.00
46.00
506.00
14.00
34.00
36.00
217.00
130.00
38.00
53.00
64.00
75.00
693.00
550.00
585.00
59.00
539.00
230.00
1900.00
1700.00
195.00
105.00
555.00
294.00
575.00
575.00
800.00
800.00
285.00
320.00
700.00
700.00
18.00
22500.00
26.00
28.00
3650.00
260.00
385.00
505.00
712.00
1245.00
810.00
95.00
450.00
2038.00
1950.00
2465.00
3000.00
5800.00
8200.00
10250.00
130.00
978.00
846.00
225.00
179.00
190.00
143.00
233.00
204.00
367.00
276.00
396.00
294.00
467.00
373.00
502.00
400.00
461.00
523.00
639.00
700.00
325.00
247.00
414.00
334.00
422.00
574.00
179.00
223.00
306.00
220.00
289.00
275.00
361.00
230.00
176.00
154.00
142.00
161.00
115.00
126.00
220.00
89.00
7634.00
3664.00
170.00
187.00
214.00
38.00
42.00
53.00
35.00
19.00
1406.00
63.00
58.00
228.00
27.00
244.00
173.00
12.00
95.00
1722.00
546.00
580.00
415.00
175.00
150.00
195.00
360.00
824.00
1390.00
1412.00
140.00
36.00
23.00
38.00
16.00
5.00
3.00
19.00
22.00
120.00
8.00
40.00
76.00
150.00
5.00
7400.00
80.00
142.00
257.00
54.00
3.00
4.00
28.00
44.00
49.00
576.00
615.00
205.00
228.00
7.00
16.00
301.00
35.00
44.00
765.00
14.00
12.00
11.00
185.00
415.00
415.00
460.00
460.00
108.00
131.00
4900.00
4600.00
4100.00
2600.00
2700.00
2500.00
1600.00
1043.00
865.00
1268.00
380.00
2
Code
No
Description
Unit
0037
0038
0039
Mobile crane.
Tractor with ripper attachment.
Tractor with trolley.
per day
per day
per day
0040
0041
0042
0043
0045
0046
0047
0048
leads for
day
per day
day
day
day
day
day
day
Notes:- Above hire - charges include cost of services of operating staff and supply of lubricating oil.
Rate
Rs.
5000.00
1000.00
1000.00
1600.00
800.00
88000.00
480.00
12000.00
800.00
800.00
800.00
BASIC RATES
0.2 LABOUR
Note :- These rates are exclusive of contractors profit and over heads and are inclusive of wages for week
day of rest
Code
No
Description
Unit
0100
0101
Bandhani
Bhisti
Day
Day
0102
0103
0111
0112
Day
Day
Day
Day
0113
0114
0115
Chowkidar
Beldar
Coolie
Day
Day
Day
0116
0117
0119
0122
Fitter (grade 1)
Assistant Fitter or 2nd class Fitter
Glazier
Mason (for plaster of paris work) 1st class
Day
Day
Day
Day
0123
0124
0125
Day
Day
Day
0126
0127
0128
0130
0131
0132
0133
Mistry
Painter
Rock Excavator
Rock Breaker
Day
Day
Day
Day
0134
0135
0138
Day
Day
Day
0139
0141
0155*
Day
Day
Day
Rate
Rs.
138.45
138.45
151.50
141.60
151.50
141.60
135.25
135.25
135.25
151.50
141.60
141.60
151.50
151.50
141.60
141.60
151.50
151.50
138.45
151.50
141.60
135.25
135.25
135.25
138.45
138.45
138.45
138.45
146.55
4
Code
No
Description
Unit
0156*
Carpenter (average)
Day
0157
0159
Day
Day
Note :- * These rates are average of 1st class and 2nd class categories. This is for use in the analysis of
rate only.
Rate
Rs.
146.55
166.00
151.50
BASIC RATES
0.3 MATERIALS
Note :- These rates are exclusive of contractors profit, over heads and carriage but include octroi, royalty,
sales tax (VAT) etc.
Code
No
Description
Unit
0222
10 Nos
0223
0224
0225
0226
0227
0228
0229
0230
metre
0231
each
0232
0233
0234
0235
0236
0237
0285
0286
0287
0291
0292
0293
each
sqm
sqm
cum
0294
0295
0296
0297
0298
0302
0304
0305
metre
cum
score
Rate
Rs.
30.00
205.00
203.00
174.00
188.00
195.00
126.00
93.00
197.00
267.00
232.00
84.00
275.00
161.00
180.00
239.00
350.00
355.00
360.00
600.00
625.00
650.00
675.00
700.00
700.00
700.00
750.00
29.00
510.00
192.00
6
Code
No
Description
0308
0309
0310
Bhusa
Paving bitumen S-90 of approved quality
Bitumen emulsion
0312
0313
0314
0316
Unit
quintal
tonne
tonne
M.T.
Bitumen grade PMB - 40
Blown type petroleum bitumen of penetration
85/25 of approved
tonne
quality
kilogram
Bitumen hot sealing compound : grade A
litre
Bitumen solution primer of approved quality
0322
0324
sqm
Premoulded joint filler 12 mm thick
Bitumen felt fibre base (vegetable or animal):Type
sqm
2 grade 1
sqm
Bitumen felt :Type 3 grade 1
litre
Coal Tar
0325
0326
0328
Blasting powder
Blasting fuse (fuse wire)
White face insulating board:12 mm thick
0317
0318
0332
0336
0339
0341
0346
kilogram
each
sqm
sqm
Natural colour insulating board:12 mm thick
Flame retardant face insulating board: 12 mm
sqm
thick
Flame retardant face insulating, Impregnated fibre
sqm
board 12 mm thick
Flat pressed 3 layer particle board (medium
density) Grade I :12 mm
sqm
thick
0362
0364
0365
0367
0368
Soft brush
Portland Cement
White Cement
0347
0348
0370
0373
0378
0379
0380
0381
each
tonne
tonne
quintal
Coal (steam)
each
Cramp Gun metal 25x6x300 mm
Brass butt hinges (light/ordinary type) : 125x70x4
10 Nos
mm
Brass butt hinges (light/ordinary type) : 100x70x4
10 Nos
mm
Brass butt hinges (light/ordinary type) : 75x40x2.5
10 Nos
mm
Brass butt hinges (light/ordinary type) : 50x40x2.5
10 Nos
mm
Rate
Rs.
200.00
22500.00
19500.00
30000.00
25000.00
20.00
28.00
300.00
45.00
45.00
16.00
25.00
10.00
239.00
175.00
208.00
279.00
258.00
198.00
102.00
366.00
253.00
15.00
12.00
4500.00
9700.00
300.00
53.00
450.00
300.00
160.00
90.00
7
Code
No
Description
0382
0383
0384
0385
0386
0387
0388
0389
0390
0391
0392
0393
0394
0400
0401
0402
0403
0404
0405
0406
0408
0409
0410
0411
0412
0413
0414
Unit
10 Nos
10 Nos
10 Nos
10 Nos
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
Brass door latch 300x16x5 mm (0.380 kg)
each
Brass door latch 250x16x5 mm (0.350 kg)
Brass mortice latch and lock 100x65 mm with6
levers and a pair of
each
brass lever handles
Brass mortice latch 100x65mm with a pair of
each
brass lever handles
0417
0418
0419
0420
0421
0422
0423
each
10 Nos
10 Nos
10 Nos
10 Nos
10 Nos
Each
Rate
Rs.
1500.00
1300.00
450.00
1650.00
1450.00
1175.00
888.00
200.00
158.00
106.00
317.00
216.00
173.00
123.00
100.00
75.00
51.00
84.00
65.00
44.00
85.00
75.00
55.00
85.00
82.00
257.00
235.00
104.00
457.00
423.00
390.00
364.00
300.00
26.00
8
Code
No
Description
0424
0427
0428
0429
0430
0431
0432
0433
0438
0442
0444
0445
0446
0447
0449
0450
0451
Brass screws 50 mm
Brass screws 40 mm
Brass screws 30 mm
0425
0426
0452
0453
0524
0525
0526
0527
0528
0555
0556
Unit
10 Nos
each
10 Nos
10 Nos
10 Nos
each
each
metre
metre
each
each
100 Nos
100 Nos
100 Nos
100 Nos
Brass screws 25 mm
100 Nos
Brass screws 20 mm
Chromium plated Brass butt hinges (heavy) type
75x65x4 .0 mm
10 Nos
(200gms)
Chromium
plated
Brass
butt
hinges
(light/ordinary) type 125x70x4
10 Nos
mm
Chromium
plated
Brass
butt
(light/ordinary) type 100x70x4
mm
Chromium plated Brass
butt
(light/ordinary) type 75x40x2.5
mm
Chromium plated Brass
butt
(light/ordinary) type 50x40x2.5
mm
Chromium plated Brass handles 125
plate 175 x32 mm
Chromium plated Brass handles 100
plate 150 x 32 mm
hinges
10 Nos
hinges
10 Nos
hinges
10 Nos
mm with
mm with
Each
Each
0557
Rate
Rs.
66.00
55.00
46.00
73.00
109.00
128.00
13.00
458.00
378.00
300.00
338.00
185.00
63.00
79.00
24.00
18.00
107.00
96.00
86.00
76.00
53.00
430.00
433.00
385.00
135.00
105.00
92.00
79.00
68.00
Code
No
0558
0568
0569
0570
0571
9
Description
Unit
each
each
each
each
0585
0586
0587
0588
0589
0590
0583
0584
0591
0592
0594
0595
0596
0597
0608
0635
0637
0638
0639
100 Nos
100 Nos
100 Nos
100 Nos
10 Nos
10 Nos
10 Nos
10 Nos
metre
100 Nos
100 Nos
100 Nos
100 Nos
0640
0641
0642
0643
0644
10 Nos
10 Nos
Rate
Rs.
323.00
55.00
73.00
67.00
56.00
383.00
25.00
123.00
150.00
90.00
83.00
63.00
122.00
143.00
239.00
78.00
54.00
34.00
28.00
21.00
40.00
30.00
24.00
15.00
15.00
4.00
92.00
53.00
32.00
Code
No
10
Description
Unit
0645
0646
Oxidised
mild
steel
parliamentary
10 Nos
hinges150x125x27x2.8 mm
Oxidised mild steel parliamentary
hinges
10 Nos
125x125x27x2.8 mm
0647
0648
0649
0650
0651
0652
0653
0654
0655
0656
0660
0661
0662
0663
0664
Oxidised mild
250x10 mm
Oxidised mild
200x10 mm
Oxidised mild
150x10 mm
Oxidised mild
100x10 mm
0665
0666
0667
10 Nos
type)
type)
type)
type)
each
each
each
each
each
each
each
each
each
each
0668
0669
0670
0679
0680
0681
0682
0683
0684
0685
0686
0687
0688
0689
100 Nos
100 Nos
100 Nos
100 Nos
10 Nos
10 Nos
10 Nos
Rate
Rs.
27.00
255.00
205.00
165.00
122.00
71.00
66.00
51.00
73.00
63.00
47.00
24.00
45.00
37.00
25.00
25.00
25.00
21.00
17.00
12.00
7.00
5.00
3.00
79.00
70.00
52.00
40.00
35.00
24.00
16.00
15.00
478.00
447.00
416.00
Code
No
11
Description
Unit
0690
0691
0692
0693
0694
0696
0697
0698
0699
0700
0701
0702
0703
0704
0705
0706
0713
0714
0715
0717
0718
0719
0752
Anodised
Aluminium
type)300x10 mm
Anodised
Aluminium
type)250x10 mm
Anodised
Aluminium
type)200x10 mm
door
bolt 300x16
door
bolt 250x16
tower
bolt
(barrel
tower
bolt
(barrel
tower
bolt
(barrel
bolt
(barrel
bolt
(barrel
Anodised
Aluminium
tower
type)150x10 mm
Anodised
Aluminium
tower
type)100x10 mm
Anodised Aluminium handles 125
175 x 32 mm
Anodised Aluminium handles 100
150 x 32 mm
mm with plate
mm with plate
with plate
50
cm
10 Nos
10 Nos
10 Nos
10 Nos
10 Nos
each
each
10 Nos
10 Nos
10 Nos
10 Nos
10 Nos
10 Nos
10 Nos
10 Nos
each
with teak
sqm
with teak
sqm
teak
sqm
with
sqm
with
sqm
with
sqm
sqm of
door area
0753
0754
0755
Decorative
type Louvers in Block
construction flush door
0757
board
sqm of
door area
Rate
Rs.
390.00
354.00
281.00
215.00
98.00
125.00
104.00
520.00
440.00
354.00
281.00
208.00
375.00
260.00
208.00
94.00
1100.00
1050.00
1000.00
632.00
610.00
600.00
245.00
86.00
118.00
210.00
57.00
Code
No
12
Description
Unit
sqm
quintal
0759
0761
Decorative plywood 4 mm
Fuel wood
0763
0765
0768
0769
Glue
Hessian cloth
Cement Concrete Jali 50 mm thick
Cement Concrete Jali 40 mm thick
0770
0771
0773
0775
0776
0777
0784
0785
0788
0810
kilogram
sqm
sqm
sqm
sqm
litre
quintal
quintal
quintal
quintal
cum
0818
cum
Mud (dry)
kilogram
Dry distemper
Oil bound washable distemper/ Acrylic distemper
kilogram
litre
Linseed oil (double boiled)
0820
0821
0823
Cement primer
Distemper primer
Pink primer (for wood)
0826
0827
0828
0829
Aluminium paint
Acid proof paint (chocolate or black)
Anticorrosive bituminous paint (black)
Black Japan
0830
0831
0833
litre
Enamel paint
litre
Floor enamel paint in all shades except green
Synthetic enamel paint in black or chocolate
litre
shade
0811
0815
0816
0834
0835
0845
0850
litre
litre
litre
litre
litre
litre
litre
litre
litre
litre
kilogram
Rate
Rs.
250.00
265.00
50.00
10.00
145.00
115.00
92.00
19.00
260.00
295.00
178.00
177.00
800.00
115.00
115.00
310.00
20.00
26.00
40.00
80.00
70.00
73.00
72.00
89.00
93.00
52.00
65.00
115.00
100.00
115.00
120.00
140.00
95.00
60.00
Code
No
13
Description
0851
0855
0856
0857
0858
0859
0863
0865
0868
0869
0870
0873
0874
Plug
Copper pins 6 mm dia 7.5 cm long
Black colour dark shade pigment
0875
0876
0886
0966
0967
0969
0973
0974
0975
0979
0980
0982
0983
0992
0994
0978
kilogram
kilogram
litre
litre
litre
litre
kilogram
kilogram
kg
kilogram
each
each
kilogram
kilogram
kilogram
each
each
kilogram
each
Pulley 25 mm dia
Rolling shutter made of 80x1.25 mm machine
sqm
rolled laths
metre
Top cover for rolling shutters
27.5 cm long wire spring grade no 2 for rolling
shutters
Ball bearing for rolling shutters
Extra for mechanical devices chain and cranked
operation for
operating rolling shutters : exceeding 10.00 sq.m
and up to 16.80
sq.m area of door
Extra for mechanical devices chain and cranked
operation for
operating rolling shutters : exceeding 16.80 sq.m
area of door
Royalty for good earth
0976
0977
Unit
each
each
sqm
sqm
cum
cum
cum
cum
quintal
sqm
Rate
Rs.
36.00
150.00
49.00
100.00
105.00
60.00
24.00
58.00
5.20
2.50
6.00
7.50
42.00
65.00
45.00
20.00
222.00
195.00
18.00
767.00
400.00
170.00
280.00
400.00
450.00
11.00
60.00
600.00
320.00
3450.00
103.00
Code
No
14
Description
Unit
0996
0999
1000
Shellac
Spirit
1001
1002
1003
1004
kilogram
Spun yarn
quintal
Mild steel round bar 12 mm dia and below
quintal
Mild steel round bar above 12 mm dia
Average rate of Mild steel round bars for
quintal
reinforcements
1005
1006
1007
quintal
Twisted steel / deformed bars
quintal
Mild steel square bars
Structural steel such as tees, angles channels
quintal
and R.S. joists
1008
1009
1010
1013
Flats up to 10 mm in thickness
Flats exceeding 10 mm in thickness
Mild steel plates
Mild steel sheets for tanks
1015
1019
1020
1021
1022
1023
1024
1025
1028
1029
1030
Straining bolts
Galvanised steel barbed wire
Galvanised steel turn buckles
1031
1034
1035
1036
1143
1145
1032
sqm
kilogram
litre
quintal
quintal
quintal
quintal
sqm
each
quintal
sqm
10 Nos
10 Nos
each
10 Nos
each
quintal
each
each
each
quintal
quintal
each
metre
metre
Rate
Rs.
120.00
192.00
37.00
30.00
3100.00
3050.00
3075.00
3175.00
3175.00
3100.00
2900.00
2875.00
3400.00
3475.00
200.00
22.00
3500.00
310.00
9.00
58.00
7.00
18.00
50.00
4400.00
9.00
13.00
9.00
4300.00
4300.00
28.00
15.00
78.00
Code
No
15
Description
Unit
metre
1149
1151
1154
1157
1158
1159
1160
1161
1163
1164
1165
1166
1168
1169
1174
1175
1177
each
100 Nos
cum
cum
cum
10 cudm
10 cudm
sqm
sqm
sqm
sqm
1187
1188
cum
Crushed stone 2.36 mm to 12.5 mm size
Superior class teak wood such as Dandeli,
Balarshah or Malabar in
10 cudm
planks
10 cudm
First class teak wood in scantling
10 cudm
First class teak wood in planks
1189
1190
1194
1196
1197
1198
1199
1201
1202
1203
1207
1208
Bitumen washer
1179
1186
10 cudm
10 cudm
10 cudm
10 cudm
10 cudm
10 cudm
10 cudm
sqm
sqm
sqm
100 Nos
100 Nos
1209
100 Nos
Rate
Rs.
6.00
46.00
970.00
332.00
332.00
700.00
45.00
50.00
256.00
120.00
140.00
97.00
239.00
150.00
145.00
160.00
717.00
675.00
895.00
492.00
506.00
394.00
410.00
335.00
186.00
160.00
178.00
218.00
198.00
175.00
170.00
20.00
18.00
27.00
16
Code
No
1210
1211
1213
1214
1215
1216
1219
1220
1221
1222
1224
1225
1227
1228
1229
1231
1234
1235
1237
1238
1241
1301
1304
1305
1307
1309
1314
1315
1330
1331
1332
1334
1335
1336
Description
Unit
100 Nos
100 Nos
kilogram
cm
cm
quintal
Wire nails
kilogram
Wire mesh (rabbit)
sqm
20 mm dia holding down bolts
quintal
Mild steel sheets with bolts and nuts to rest on pint each
Hard drawn steel wire
quintal
Mild steel flat strap fitting
quintal
Chequered terrazzo tiles 22 mm thick(light shade sqm
Chequered terrazzo tiles 22 mm thick(medium sh sqm
Chequered terrazzo tiles 22 mm thick (dark shade) sqm
Extra for selected planks of second class teakwoo 10 cudm
Aluminium Plain Strip edging 57x12x3 mm
metre
Diesel oil
litre
Cutting marble or sand stone slab up to 50 mm thick by mechanical
device
metre
Extra for selected planks of first class teakwood 10 cudm
Commercial LPG in cylinder.
kg
Bleaching powder
Surface box for stop cock
Surface box for sluice valve
quintal
each
each
each
pair
each
each
Rate
Rs.
20.00
21.00
20.00
1.00
1.00
329.00
40.00
38.00
3800.00
75.00
3100.00
2900.00
230.00
200.00
170.00
72.00
105.00
30.25
6.00
80.00
35.00
1550.00
72.00
140.00
185.00
48.00
21.00
22.00
28.00
13.00
11.00
20.00
25.00
37.00
Code
No
17
Description
Unit
1337
1339
1340
1342
1343
1350
1352
1353
1354
1355
each
each
each
each
each
each
each
C.I. cover and frame 300x300 mm inside
C.I.cover without frame 300x300mm inside i/c
each
cover of 4.50 kg
Rectangular cover 455x610 mm with frame (low
each
duty)
1360
1361
1362
1363
1364
1366
1367
1369
1373
1374
1375
1376
1377
1378
1379
1380
1381
1382
1383
1384
1392
1396
1356
1357
pipe joints
pipe joints
pipe joints
pipe joints
each
each
pair
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
Rate
Rs.
41.00
157.00
193.00
157.00
193.00
23.00
265.00
170.00
1395.00
844.00
4257.00
2129.00
80.00
114.00
156.00
79.00
10.00
19.00
23.00
10.00
9.00
12.00
13.00
15.00
20.00
30.00
38.00
45.00
66.00
83.00
106.00
118.00
249.00
527.00
Code
No
1397
1464
1466
1468
1470
1472
1532
1533
1534
1535
1540
1541
1542
18
Description
Unit
kilogram
Pig lead
S & S.C.I.standard specials up to 300 mm dia
quintal
(heavy class)
S & S.C.I.standard specials over 300 mm dia
quintal
(heavy class)
Flanged C.I. standard specials up to 300 mm
quintal
dia(heavy class)
Flanged C.I. standard specials over 300 mm
quintal
dia(heavy class)
metre
Casing pipe 100 mm dia
Flush pipe with union spreaders and clamps all in
C.P. brass for
single stall
Flush pipe with union spreaders and clamps all in
C.P. brass for
double stall
Flush pipe with union spreaders and clamps all in
C.P. brass for
range of three stall
Flush pipe with union spreaders and clamps all in
C.P. brass for
range of four stall
Flush pipe and spreaders G.I.for single set of one
squatting plate urinal each
Flush pipe and spreaders G.I.for range of two
squatting plates urinal
each
each
each
each
each
1545
1546
1547
1548
1549
1550
1551
1552
1555
1559
1608
1612
1543
1614
1616
1617
metre
metre
metre
metre
metre
metre
metre
each
each
each
each
each
G.I. inlet connection
S.C.I. soil, waste and vent single socketed
pipe1.80 metres
each
long:75mm dia
S.C.I. soil, waste and vent single socketed
pipe1.80 metres long:
each
100mm dia
1618
single socketed
each
Rate
Rs.
58.00
2400.00
2595.00
4320.00
4772.00
292.00
204.00
333.00
415.00
465.00
138.00
203.00
255.00
320.00
58.00
77.00
109.00
140.00
160.00
211.00
269.00
355.00
5.00
15.00
38.00
215.00
50.00
537.00
610.00
1205.00
Code
No
19
Description
Unit
each
each
each
1620
1621
1622
1624
1625
1627
each
S.C.I. bend with access door 75mm dia
each
S.C.I. bend with access door 100mm dia
S.C.I. plain single equal junctions75x75x75 mm
each
dia
1628
1630
1631
1633
1634
1636
1637
1639
1640
1641
1642
1643
1644
1645
1646
1647
1648
1649
1653
1656
1659
1662
1666
each
each
each
each
each
each
each
each
each
each
each
each
G.I. Union 50 mm nominal bore
each
G.I. Union 65 mm nominal bore
each
G.I. Union 80mm nominal bore
Polyethylene water storage tank with cover and
suitable locking
per litre
arrangement
Sand cast iron S&S plain single unequal junctions
: 100x100x75 mm
dia
Sand cast iron S&S single unequal junctions:
100x100x75 mm dia
with access door.
Sand cast iron S&S plain double unequal
junctions : 100x100x75x75
mm dia
Sand cast iron S&S double unequal junctions:
100x100x75x75 mm
dia with access door.
Sand cast iron heel rest bend75mm dia
each
each
each
each
each
Rate
Rs.
140.00
178.00
407.00
161.00
194.00
205.00
265.00
224.00
297.00
296.00
394.00
333.00
417.00
109.00
152.00
32.00
50.00
59.00
73.00
108.00
158.00
324.00
392.00
4.00
288.00
321.00
423.00
453.00
165.00
Code
No
1667
1669
1670
1672
1673
1674
1677
1682
1683
1685
1686
1687
1688
1689
20
Description
Unit
each
Sand cast iron heel rest bend 100mm dia
S.C.I. single equal invert branch of required
each
degree75x75x75 mm dia
S.C.I. single equal invert branch of required
degree 100x100x100 mm
each
dia
S.C.I. double equal invert branch
degree 75x75x75x75
mm dia
S.C.I. double equal invert branch
degree
100x100x100x100 mm dia
S.C.I. single unequal invert branch
degree
100x100x75 mm dia
S.C.I. double unequal invert branch
degree
100x100x75x75 mm dia
S.C.I. door pieces 75 mm dia
S.C.I. door pieces 100 mm dia
of required
each
of required
each
of required
each
of required
each
each
each
each
S.C.I. collar 75 mm dia
each
S.C.I. collar 100 mm dia
Unplasticised P.V.C. connection pipe with brass
union 30 cm long 15
each
mm bore
Unplasticised P.V.C. connection pipe with brass
union 30 cm long 20
each
mm bore
1693
1700
1701
1702
1703
1704
1705
1706
1707
1709
1710
1711
1712
1690
metre
metre
metre
metre
metre
metre
metre
metre
metre
metre
Rate
Rs.
197.00
239.00
321.00
314.00
422.00
382.00
458.00
211.00
291.00
82.00
110.00
18.00
25.00
25.00
35.00
450.00
118.00
135.00
157.00
228.00
333.00
398.00
642.00
719.00
836.00
986.00
1243.00
1500.00
Code
No
21
Description
1713
1714
1715
1716
1717
1718
R.C.C.
R.C.C.
R.C.C.
R.C.C.
1719
1720
1721
1723
1724
1725
1726
1727
1854
1855
1856
1857
1858
1859
1863
1871
1872
1875
1876
1878
1879
1881
1882
1885
1889
1891
Unit
metre
each
each
each
each
each
each
each
each
each
each
each
each
R.C.C. collarsNP2 class 1100 mm dia
each
R.C.C. collarsNP2 class 1200 mm dia
Stoneware pipes grade A (60 cm long) 100 mm
each
dia
Stoneware pipes grade A (60 cm long) 150 mm
each
dia
Stoneware pipes grade A (60 cm long) 200 mm
each
dia
Stoneware pipes grade A (60 cm long) 230 mm
each
dia
Stoneware pipes grade A (60 cm long) 250 mm
each
dia
Stoneware pipes grade A (60 cm long) 300 mm
dia
Fire clay kitchen sink: 600x450x250 mm
White vitreous china laboratory sink450x300x150
mm
White vitreous china laboratory sink600x450x200
mm
each
each
each
each
1893
Rate
Rs.
1543.00
16.00
21.00
34.00
42.00
63.00
73.00
92.00
102.00
146.00
178.00
210.00
241.00
280.00
30.00
42.00
80.00
85.00
113.00
165.00
1192.00
664.00
1400.00
275.00
250.00
28.00
40.00
30.00
405.00
103.00
70.00
125.00
158.00
Code
No
22
Description
Unit
each
each
1895
1896
1897
1900
1902
1904
1913
1915
1922
1898
1923
1924
1927
1928
1929
1930
1931
1932
1933
1934
1935
1936
1937
1938
1940
each
each
each
each
each
each
each
each
1941
1942
each
each
1943
1944
1945
1947
1949
1950
1951
each
each
each
each
Rate
Rs.
99.00
260.00
221.00
164.00
55.00
86.00
160.00
380.00
610.00
175.00
260.00
300.00
235.00
296.00
330.00
483.00
700.00
1160.00
238.00
305.00
410.00
618.00
1085.00
1540.00
1890.00
2365.00
2840.00
5405.00
8050.00
9920.00
585.00
540.00
347.00
48.00
Code
No
23
Description
Unit
1952
1953
1954
1955
1956
1957
1958
1959
1960
1961
1962
1963
1964
1965
1970
1980
1984
1986
Fly ash
F.P.S. bricks tile class designation 100
Modular bricks class designation75
2391
Strips-Aluminium
fluted 3.15mm thick and
150mm wide
Strips Aluminium fluted 3.15mm thick
and
200mm wide metre
Float glass sheet of nominal thickness 4 mm
(weight not less than
10kg/sqm).
Float glass sheet of nominal thickness 5.5 mm.
(weight not less than
13.50 kg/sqm).
Ply wood 5 ply with commercial ply on both faces
6 mm thick
2392
2406
2407
2412
2447
2449
2451
2452
2453
each
each
each
each
each
each
each
each
each
each
each
each
each
each
pair
cum
1000 Nos
1000 Nos
metre
Metre
sqm
sqm
sqm
metre
of
each
of
each
of
each
of
each
2454
Rate
Rs.
53.00
290.00
700.00
554.00
8.00
8.00
12.00
12.00
12.00
13.00
24.00
26.00
30.00
796.00
80.00
6.00
1950.00
2700.00
216.00
288.00
248.00
340.00
282.00
27.00
27.00
36.00
43.00
55.00
70.00
Code
No
2455
2456
2459
24
Description
Unit
each
Brass hanging type door stopper 150 mm
Hydraulic door closer bottle type M.S. body with
necessary
each
accessories and screws complete
Anodised Aluminium hanging type door stopper
each
2464
2465
2466
2467
2468
2469
2470
2471
2480
2481
2504
2505
2602
2603
2704
2710
2500
2750
2751
2901
2902
each
each
each
2483
each
10 cudm
sqm
sqm
10 cudm
cum
10 cudm
1000 Nos
1000 Nos
kilogram
quintal
sqm
sqm
cum
2903
2904
2908
2909
Rate
Rs.
46.00
506.00
14.00
34.00
36.00
217.00
130.00
38.00
53.00
64.00
75.00
693.00
550.00
585.00
59.00
539.00
230.00
1900.00
1700.00
195.00
105.00
555.00
294.00
575.00
575.00
800.00
800.00
285.00
320.00
Code
No
2910
2911
2914
2916
3002
3004
3050
3080
3084
3088
3092
3096
3213
3228
3229
3300
25
Description
3314
3317
3320
3321
3326
3617
3620
3624
3625
kilogram
tonne
sqm
each
Stone ware spouts 100 mm dia 60 cm long
quintal
Galvanised steel corrugated sheets
Gunmetal non-return valve-horizontal (screwed
each
end) 25 mm dia
Gunmetal non-return valve-horizontal (screwed
each
end) 32 mm dia
3311
3621
Unit
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
each
3628
3629
3634
3635
3640
each
each
Rate
Rs.
700.00
700.00
18.00
22500.00
26.00
28.00
3650.00
260.00
385.00
505.00
712.00
1245.00
810.00
95.00
450.00
2038.00
1950.00
2465.00
3000.00
5800.00
8200.00
10250.00
130.00
978.00
846.00
225.00
179.00
190.00
143.00
233.00
204.00
367.00
Code
No
26
Description
Unit
3641
3644
3645
3650
3651
3654
3655
3660
3664
3670
3674
3681
3682
3685
3686
3690
3695
each
each
each
each
each
each
each
3699
3707
3708
3712
3713
each
each
each
each
each
3716
3717
3728
3729
3733
3734
each
each
each
S.C.I S&S door pieces 100 mm dia
each
S.C.I S&S door pieces 75 mm dia
S.C.I S&S, Slotted Cowl (Terminal Guard) 100
each
mm
S.C.I S&S, Slotted Cowl (Terminal Guard) 75 mm
each
Rate
Rs.
276.00
396.00
294.00
467.00
373.00
502.00
400.00
461.00
523.00
639.00
700.00
325.00
247.00
414.00
334.00
422.00
574.00
179.00
223.00
306.00
220.00
289.00
275.00
361.00
230.00
176.00
154.00
142.00
Code
No
27
Description
Unit
each
3738
3739
3746
3747
3749
each
S.C.I S&S, collars 75 mm
each
S.C.I. S&S, 76 mm offset for75 mm dia pipe
each
S.C.I. S&S, 76 mm offset for100 mm dia pipe
Vitreous china toilet paper holder of standard
each
size
3860
3861
4006
each
560 mm dia cover with frame (Heavy duty)
each
560 mm dia cover without frame (Heavy duty)
Pressed steel door frames (mild steel sheet
metre
1.25mm) Profile B
4007
4008
4009
4010
4011
4012
4013
4014
metre
metre
kilogram
kilogram
4201
4202
4203
4204
4205
4206
4207
Hydrochloric acid
Copper chloride
Copper nitrate
Ammonium chloride
5001
6001
6007
6010
6019
6501
7001
7003
7004
kilogram
kilogram
kilogram
kilogram
litre
Mobil oil
White marble slab Makrana second quality plain
sqm
veined 18 mm thick
sqm
Pink marble slab plain 18mm thick
sqm
Udaypur green marble slab plain 18mm thick
sqm
Black Zebra marble slab plain 18mm thick
cum
Sand zone V (Jamuna)
Brass 100mm mortice latch and lock with6 levers
without pair of
each
handles
Pair of Anodised Aluminium lever handles for
100mm mortice latch
each
and lock
Vitreous china flat back wash basin 450x300
each
mm
Rate
Rs.
161.00
115.00
126.00
220.00
89.00
7634.00
3664.00
170.00
187.00
214.00
38.00
42.00
53.00
35.00
19.00
1406.00
63.00
58.00
228.00
27.00
244.00
173.00
12.00
95.00
1722.00
546.00
580.00
415.00
175.00
150.00
195.00
360.00
Code
No
28
Description
Unit
7005
7006
7008
7009
7010
7011
7012
7013
Ceiling sections
Perimeter channel
Intermediate channel
Ceiling angle
7014
7015
7016
Connecting clips
Soffit cleat
Joint filler
7017
7018
7019
7020
Joint finisher
Joint tape roll
Dash fastener/ Chemical fastener
All drive screws ( for gypsum board)
7021
7022
7023
7024
7027
7029
7032
7034
7035
7036
7040
7042
metre
metre
metre
metre
each
each
kilogram
kilogram
roll
each
100 Nos
litre
litre
each
tonne
10 Nos
sqm
sqm
metre
7044
7045
7046
7047
7048
7043
metre
metre
each
Rate
Rs.
824.00
1390.00
1412.00
140.00
36.00
23.00
38.00
16.00
5.00
3.00
19.00
22.00
120.00
8.00
40.00
76.00
150.00
5.00
7400.00
80.00
142.00
257.00
54.00
3.00
4.00
28.00
44.00
49.00
576.00
615.00
205.00
228.00
7.00
Code
No
29
Description
7049
7055
7056
7059
7060
7063
7064
7065
7068
7070
7071
7077
7087
7090
7091
7095
7096
7097
7098
7101
7102
Unit
metre
sqm
metre
each
each
each
each
each
sqm
sqm
sqm
each
each
each
each
7103
7104
7105
7106
7107
Rate
Rs.
16.00
301.00
35.00
44.00
765.00
14.00
12.00
11.00
185.00
415.00
415.00
460.00
460.00
108.00
131.00
4900.00
4600.00
4100.00
2600.00
2700.00
2500.00
1600.00
1043.00
865.00
1268.00
380.00
Code
No
30
Description
Unit
7112
7113
7114
7115
7116
7117
7118
7119
7120
7123
7126
7127
7128
7129
7130
7131
7132
7133
7134
each
each
each
each
each
each
each
each
S.W. intercepting trap 100 mm dia
each
S.W. intercepting trap 150 mm dia
Rectangular shape 600x450 mm precast R.C.C.
manhole cover with
each
frame - L.D. - 25
Square shape 350x350 mm precast R.C.C.
manhole cover with frame
each
- L.D. - 25
Circular shape 450 mm dia precast R.C.C.
manhole cover with frame
each
- L.D. - 25
Rectangular shape 500x500 mm precast R.C.C.
manhole cover
each
with frame - M.D. - 10
Circular shape 500 mm dia precast R.C.C.
manhole cover with frame
7135
7136
7137
7139
7143
7151
7154
7155
7157
7181
7182
7183
7184
7187
each
- M.D. - 10
Circular shape 560 mm dia precast R.C.C.
manhole cover with frame
each
- H.D. - 20
Circular shape 560 mm dia precast R.C.C.
manhole cover with frame
each
- E.H.D. - 35
Factory made 35 mm thick shutters with
laminated veneer lumber
styles rails as per TADS IS:1995 and panels of 12
mm thick plain
type-I, medium density flat pressed three layer,
graded particle board
(FPT-I) as per IS:3087-1985 bonded with BWP
type synthetic resin
sqm
adhesive, as per IS:848-1974
Factory made 35 mm thick shutters with
laminated veneer lumber
styles rails as per TADS IS:1995 and panels of 12
mm thick both
sides prelaminated type-I, medium density flat
pressed three layer,
graded particle board (FPT-I) as per IS:30871985 bonded with BWP
type synthetic resin adhesive, as per IS:848-1974
sqm
Factory made 35 mm thick shutters with
laminated veneer lumber
styles rails as per TADS IS:1995 and panels of 12
mm thick one side
prelaminated type-I, and other side balancing
lamination, medium
density flat pressed three layer, graded particle
board (FPT-I) as per
IS:3087-1985 bonded with BWP type synthetic
resin adhesive, as per
IS:848-1974
Factory made 30 mm thick shutters with
laminated veneer lumber
styles rails as per TADS IS:1995 and panels of
sheet glass using 10
kg/ sqm glass panes
Factory made 35 mm thick shutters with
laminated veneer lumber
styles rails as per TADS IS:1995 and panels of
galvanised wire
gauge with average width of aperture 1.4 mm on
both directions with
wire of dia 0.63 mm
Factory made 30 mm thick shutters with
laminated veneer lumber
styles rails as per TADS IS:1995 and panels of
galvanised wire
gauge with average width of aperture 1.4 mm on
both directions with
wire of dia 0.63 mm
Laminated veneer lumber confirming to TADSS
IS:1995
manufactured in factory in frames of doors,
windows
C.I. pile shoe
M.S. clamps for pile shoe
Bentonite
Oxidised M.S. safety chain (weighing not less
than 450 gms) for door
C.I. grating 150 mm dia. (Weighing not less than
440 gm)
sqm
sqm
sqm
sqm
10 cudm
kilogram
kilogram
tonne
each
each
7188
7189
7190
7191
4 kg / cm2)
metre
4 kg / cm2)
metre
4 kg / cm2)
metre
4 kg / cm2)
metre
7192
7193
7194
7195
7196
7197
7198
7199
each
each
each
each
each
7208
7209
7212
7213
7214
7215
7231
7232
7233
7236
7237
7239
7240
7241
7244
7245
7246
each
each
each
each
sqm
sqm
sqm
sqm
sqm
litre
litre
litre
7247
7254
7255
7256
7257
7258
7259
7260
7261
7266
7267
7248
7249
7250
7251
7252
7253
7268
7269
7270
7271
7272
per test
per test
per test
per test
per test
per test
per test
litre
litre
litre
each
each
each
each
each
1000 Nos
each
each
sqm
sqm
30 mm thick prelaminated flush door shutter
IInd class teak wood lipping 25 mm wide x 12
metre
mm thick
25 mm thick melamine faced prelaminated three
sqm
layer particle board
7295
7297
7306
7307
7309
7312
7313
7314
7315
sqm
sqm
kilogram
sqm
tonne
7318
7319
7320
7321
7322
7323
7324
7325
7326
7327
7328
7329
7330
7331
7332
7333
7334
7335
7338
7339
7340
Binding wire
Gun metal cramp
Stainless steel cramp
Stainless steel pin .
7342
7343
7344
7345
7346
7347
each
Prop 4 m
each
Double coupler
Cadmium plated full threaded steel screws (30x4
100 Nos
mm dia.)
7348
7349
7354
100 Nos
Aluminium washer 2 mm thick 15 mm dia
metre
12 mm M.S. U beading
Plastic encapsulated M.S. foot rest 30x20x15 cm
each
each
each
each
each
each
each
each
each
each
metre
each
each
each
each
kilogram
kilogram
kilogram
kg
each
each
each set
7358
7359
7361
7363
7364
7366
7367
7369
7375
7376
7377
7378
7379
7380
7381
7382
7385
7386
7388
7389
7390
7391
7392
7393
7394
7395
7396
7400
7401
each
each
metre
metre
each
each
each
each
each
kilogram
each
each
each
each
each
each
each
each
each
each
7402
7403
7405
7406
7407
7408
7409
7411
7412
7415
7416
7417
7418
7419
7420
7421
7422
7423
7424
each
each
each
each
each
each
each
each
each
each
7428
each
Dirt box strainer 200 mm
each
Cats eye
Water stops Serrated with central bulb (225 mm
metre
wide, 8-11 mm thick)
metre
Water stops Dumb bell with central bulb
7429
7430
7431
Kickers
Wedge expansion hold fastener 1/4\" or 6 mm
Wedge expansion hold fastener 3/8\" or 10 mm
7432
7439
7425
7426
7427
7442
7443
7444
7445
7449
7451
7452
metre
each
each
each
each
Aluminium single cleat of size 30x32x3
each
Aluminium grip strip of size 50x12x2
25 mm prelaminated flush door both side
sqm
decorative
kilogram
Aluminium U beading
sqm
Glass sheet (Pin headed) 4 mm thick
Raj nagar plain white marble (table rubbed and
polished) 18 mm thick
sqm
above 0.10 sqm up to 0.20 sqm
Rate
Rs.
370.00
245.00
280.00
635.00
151.00
16.00
21.00
20.00
22.00
632.00
858.00
1277.00
144.00
202.00
628.00
540.00
474.00
575.00
575.00
838.00
935.00
1500.00
1618.00
1572.00
1290.00
1328.00
1150.00
540.00
40.00
35.00
2700.00
43.00
16.00
58.00
112.00
14.00
17.00
30.00
40.00
47.00
72.00
83.00
115.00
100.00
160.00
50.00
85.00
105.00
196.00
15.00
30.00
114.00
163.00
55.00
193.00
305.00
280.00
318.00
228.00
1440.00
1670.00
19500.00
27500.00
37500.00
11500.00
18000.00
23000.00
11500.00
18000.00
29.00
97.00
148.00
258.00
220.00
258.00
258.00
288.00
8900.00
90.00
90.00
390.00
716.00
28.00
708.00
1500.00
1615.00
195.00
225.00
23200.00
6.00
7.00
9.00
11.00
30.00
980.00
31.00
42.00
57.00
72.00
10.00
12.00
280.00
1000.00
75.00
60.00
225.00
900.00
275.00
1100.00
750.00
40.00
270.00
280.00
130.00
1600.00
1000.00
375.00
1030.00
45.00
23.00
7.00
9.00
93.00
570.00
430.00
465.00
396.00
390.00
190.00
48.00
55.00
352.00
880.00
1070.00
1530.00
1224.00
533.00
250.00
32000.00
515.00
225.00
30.00
32.00
22.00
40.00
45.00
50.00
1400.00
25.00
1550.00
96.00
220.00
155.00
96.00
120.00
150.00
90.00
75.00
30.00
36.00
90.00
3050.00
4480.00
5800.00
1800.00
2800.00
4000.00
4500.00
2500.00
3750.00
4850.00
6800.00
450.00
330.00
306.00
325.00
10.00
12.00
23.00
430.00
52.00
10.00
7.00
650.00
195.00
160.00
540.00
Code
No
7139
7143
7151
7154
7155
7157
7181
7182
7183
7184
7187
7188
31
Description
Unit
sqm
sqm
sqm
sqm
sqm
10 cudm
kilogram
kilogram
tonne
each
each
metre
7189
7190
7191
7192
7193
7194
each
each
each
Rate
Rs.
1618.00
1572.00
1290.00
1328.00
1150.00
540.00
40.00
35.00
2700.00
43.00
16.00
58.00
112.00
14.00
17.00
30.00
40.00
47.00
Code
No
32
Description
Unit
each
7195
7196
7197
7198
7199
each
7208
7209
7212
7213
7214
7215
7231
7232
7233
7236
7237
7239
7240
7241
7244
7245
7246
7247
each
each
each
each
sqm
sqm
sqm
sqm
sqm
litre
litre
litre
7248
7249
Rate
Rs.
72.00
83.00
115.00
100.00
160.00
50.00
85.00
105.00
196.00
15.00
30.00
114.00
163.00
55.00
193.00
305.00
280.00
318.00
228.00
1440.00
1670.00
19500.00
27500.00
37500.00
11500.00
Code
No
7250
33
Description
7254
7255
7256
7257
7258
7259
7260
7261
7266
7267
7251
7252
7253
7268
7269
7270
7271
7272
7295
7297
7306
7307
7309
Unit
per test
per test
per test
per test
litre
litre
litre
each
each
each
each
each
1000 Nos
each
each
sqm
sqm
30 mm thick prelaminated flush door shutter
IInd class teak wood lipping 25 mm wide x 12
metre
mm thick
25 mm thick melamine faced prelaminated three
sqm
layer particle board
Granite Black marble, 18 mm thick slab, above
0.2 sqm up to 0.5 sqm
(areawise)
Granite Black marble, 18 mm thick slab, above
1.0 sqm up to 2.0 sqm
(areawise)
Aluminium T or L sections
For flush door shutters Extra for providing teak
veneering on one side
instead of commercial veneering
Paving Asphalt 60/70 penetration
sqm
sqm
kilogram
sqm
tonne
7312
7313
Rate
Rs.
18000.00
23000.00
11500.00
18000.00
29.00
97.00
148.00
258.00
220.00
258.00
258.00
288.00
8900.00
90.00
90.00
390.00
716.00
28.00
708.00
1500.00
1615.00
195.00
225.00
23200.00
6.00
7.00
Code
No
34
Description
Unit
7314
7315
7318
7319
7320
7321
7322
7323
7324
7325
7326
7327
7328
7329
7330
7331
7332
7333
7334
7335
7338
7339
7340
Binding wire
Gun metal cramp
Stainless steel cramp
Stainless steel pin .
7342
7343
7344
7345
7346
7347
each
Prop 4 m
each
Double coupler
Cadmium plated full threaded steel screws (30x4
100 Nos
mm dia.)
7348
7349
7354
100 Nos
Aluminium washer 2 mm thick 15 mm dia
metre
12 mm M.S. U beading
Plastic encapsulated M.S. foot rest 30x20x15 cm
each
each
each
each
each
each
each
each
each
each
metre
each
each
each
each
kilogram
kilogram
kilogram
kg
each
each
each set
Rate
Rs.
9.00
11.00
30.00
980.00
31.00
42.00
57.00
72.00
10.00
12.00
280.00
1000.00
75.00
60.00
225.00
900.00
275.00
1100.00
750.00
40.00
270.00
280.00
130.00
1600.00
1000.00
375.00
1030.00
45.00
23.00
7.00
9.00
93.00
Code
No
7358
7359
35
Description
Unit
7361
7363
7364
7366
7367
7369
7375
7376
7377
7378
7379
7380
7381
7382
7385
7386
7388
7389
7390
7391
7392
each
each
metre
metre
each
each
each
each
each
7393
7394
7395
7396
7400
7401
7402
kilogram
each
each
each
each
each
each
Rate
Rs.
570.00
430.00
465.00
396.00
390.00
190.00
48.00
55.00
352.00
880.00
1070.00
1530.00
1224.00
533.00
250.00
32000.00
515.00
225.00
30.00
32.00
22.00
40.00
45.00
50.00
1400.00
25.00
1550.00
96.00
220.00
155.00
Code
No
36
Description
Unit
each
each
each
each
7403
7405
7406
7407
7408
7409
7411
7412
7415
7416
7417
7418
7419
7420
7421
7422
7423
7424
each
each
each
each
each
each
each
each
each
each
7428
each
Dirt box strainer 200 mm
each
Cats eye
Water stops Serrated with central bulb (225 mm
metre
wide, 8-11 mm thick)
metre
Water stops Dumb bell with central bulb
7429
7430
7431
Kickers
Wedge expansion hold fastener 1/4\" or 6 mm
Wedge expansion hold fastener 3/8\" or 10 mm
7432
7439
7425
7426
7427
7442
7443
7444
7445
7449
7451
7452
metre
each
each
each
each
Aluminium single cleat of size 30x32x3
each
Aluminium grip strip of size 50x12x2
25 mm prelaminated flush door both side
sqm
decorative
kilogram
Aluminium U beading
sqm
Glass sheet (Pin headed) 4 mm thick
Raj nagar plain white marble (table rubbed and
polished) 18 mm thick
sqm
above 0.10 sqm up to 0.20 sqm
Rate
Rs.
96.00
120.00
150.00
90.00
75.00
30.00
36.00
90.00
3050.00
4480.00
5800.00
1800.00
2800.00
4000.00
4500.00
2500.00
3750.00
4850.00
6800.00
450.00
330.00
306.00
325.00
10.00
12.00
23.00
430.00
52.00
10.00
7.00
650.00
195.00
160.00
540.00
Code
No
7453
7466
7468
7477
7478
7479
7480
7485
29.00
7486
34.00
7491
37
Description
7495
7498
metre
sqm
sqm
sqm
sqm
sqm
Each
7497
sqm
7492
7493
7494
7496
Unit
Each
Each
Each
with Epoxy
Each
with Epoxy
Each
with Epoxy
Each
with Epoxy
7500
Each
H.D. Ball
PTMT Ball Cock 50mm Complete with Epoxy
Coated Aluminium Road &
Each
H.D. Ball
Each
PTMT Angle Stop cock with Flange 15mm
7501
7503
7504
7499
Each
Each
Each
Rate
Rs.
580.00
15.00
418.00
595.00
716.00
775.00
625.00
metre
metre
45.00
66.00
295.00
320.00
121.00
175.00
396.00
745.00
1120.00
120.00
81.00
135.00
108.00
Code
No
38
Description
Unit
7505
7506
7507
7508
7509
7512
7513
7514
7515
7516
7517
7518
7552
7553
7555
7556
7651
7652
7653
7654
7655
7656
7657
7658
7659
7660
7661
7662
7663
7664
7665
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
sqm
sqm
sqm
Coir veneered board 12mm thick
sqm
Coir veneered board 18mm thick
Ductile Iron class K - 9 pipe Conforming to I.S.
Metre
8329 100mm dia
Ductile Iron class K - 9 pipe Conforming to I.S.
Metre
8329 150mm dia
Ductile Iron class K - 9 pipe Conforming to I.S.
Metre
8329 200mm dia
Ductile Iron class K - 9 pipe Conforming to I.S.
Metre
8329 - 250mm dia
Ductile Iron class K - 9 pipe Conforming to I.S.
Metre
8329 - 300mm dia
Ductile Iron class
8329 - 350mm dia
Ductile Iron class
8329 - 400mm dia
Ductile Iron class
8329 - 450mm dia
Ductile Iron class
8329 - 500mm dia
Metre
Metre
Metre
Metre
7666
7668
7669
Rate
Rs.
180.00
210.00
245.00
120.00
108.00
27.00
30.00
36.00
48.00
60.00
72.00
24.00
235.00
308.00
548.00
820.00
658.00
978.00
1348.00
1743.00
2238.00
2625.00
3763.00
4175.00
5600.00
6275.00
8538.00
9725.00
10000.00
11663.00
13125.00
25.00
35.00
62.00
Code
No
39
Description
Unit
7670
7671
7672
7673
7674
7675
7676
7677
7678
7679
7680
7681
7682
7683
7684
7685
7686
7687
7688
7689
7690
7691
7692
Each
Each
Each
Each
Each
Quintal
Quintal
Quintal
Quintal
Metre
7693
7694
7695
7696
7697
7698
7699
7700
7701
S&S Centrifugally
100mm dia
S&S Centrifugally
125mm dia
S&S Centrifugally
150mm dia
S&S Centrifugally
200mm dia
Metre
metre
metre
Metre
Rate
Rs.
68.00
98.00
123.00
248.00
275.00
285.00
348.00
550.00
648.00
725.00
968.00
1188.00
8938.00
13413.00
9400.00
14239.00
1888.00
2613.00
3388.00
4498.00
5788.00
7210.00
8613.00
10413.00
12625.00
17125.00
21125.00
624.00
763.00
901.00
1252.00
1779.00
Code
No
7702
7703
7704
7705
7706
7707
7708
7709
7710
7711
7712
7713
7714
7715
7716
7717
7718
7719
7720
40
Description
S&S Centrifugally
300mm dia
S&S Centrifugally
350mm dia
S&S Centrifugally
400mm dia
S&S Centrifugally
450mm dia
Unit
LA
LA
metre
Metre
Metre
Metre
Metre
as
Quintal
as
Metre
Quintal
Quintal
Quintal
Metre
Metre
Metre
Metre
Metre
cast (spun)
Metre
cast (spun)
metre
cast (spun)
Metre
cast (spun)
metre
7721
7722
7723
7724
7725
7726
Metre
Metre
Metre
Metre
Rate
Rs.
2366.00
2918.00
3574.00
4276.00
5211.00
6884.00
3530.00
3988.00
5338.00
5580.00
977.00
1511.00
2092.00
2800.00
3559.00
4553.00
5885.00
7627.00
9962.00
12992.00
597.00
870.00
1237.00
1675.00
2369.00
Code
No
7727
7728
7729
7730
7731
7732
7733
7734
7735
7736
7737
7738
7739
41
Description
Unit
Metre
Metre
Metre
Metre
metre
metre
1000 Nos
1000 Nos
7741
7742
7800
7801
7802
7803
7804
setting
(M.S.)
tonne
tonne
7805
7806
7807
7808
7809
7850
7857
7858
7859
7861
each
each
each
each
each
sqm
each
each
each
each
Rate
Rs.
2728.00
3256.00
3861.00
4557.00
6011.00
7463.00
10405.00
12798.00
15505.00
3550.00
1792.00
3083.00
26000.00
26300.00
19500.00
268.00
320.00
347.00
462.00
496.00
3350.00
1500.00
1350.00
309.00
334.00
1000.00
70.00
90.00
110.00
160.00
Code
No
7862
7863
7864
7865
7866
7900
7901
7902
7903
7904
8001
42
Description
Unit
8006
8007
8008
8002
8003
8004
8010
8011
8012
8100
8200
8201
sqm
sqm
sqm
sqm
sqm
sqm
8203
8206
8207
8210
8204
8205
100 Nos
Rate
Rs.
27.00
32.00
30.00
36.00
54.00
2050.00
3233.00
3200.00
2767.00
2717.00
1830.00
1900.00
1743.00
2148.00
145.00
558.00
660.00
112.00
294.00
150.00
66.00
50.00
85.00
147.00
185.00
221.00
54.00
25.00
213.00
Code
No
8211
8212
8214
8215
8216
8217
8218
8219
8220
8221
8222
8223
8224
8225
43
Description
10 Nos
10 Nos
10 Nos
10 Nos
10 Nos
8304
8305
8501
8502
8504
8505
8506
8507
8508
8509
8612
8613
100 Nos
100 Nos
100 Nos
Stainless steel screws 20 mm
Stainless steel butt hinges 125x64x1.9 mm IS :
10 Nos
12817 marked
Stainless steel butt hinges 100x58x1.9 mm IS :
10 Nos
12817 marked
Stainless steel butt hinges 75x47x1.8 mm IS :
10 Nos
12817 marked
8300
8301
8302
8303
8510
8611
Unit
Metre
Metre
Metre
Metre
Metre
Metre
kilogram
sqm
litre
litre
litre
litre
litre
litre
litre
Metal Primer (U.G.)
Main T ceiling sections 24x38x0.3 mm (3 metre
each
long)
each
Perimeter wall angle 21x21 mm (3 metre long)
each
Intermediate cross channel (1.2 mtrs)
Rate
Rs.
157.00
98.00
63.00
200.00
143.00
112.00
90.00
261.00
185.00
155.00
256.00
133.00
67.00
52.00
79.00
97.00
126.00
172.00
227.00
304.00
114.00
33.00
264.00
123.00
202.00
183.00
52.00
76.00
91.00
162.00
102.00
62.00
Code
No
44
Description
Unit
8614
8615
8616
8617
8618
8620
8621
8622
8623
8625
8626
8627
8628
8629
8630
8631
8632
8633
8634
8635
8636
8637
8638
8639
each
each
each
each
each
sqm
sqm
sqm
sqm
(PPR)
metre
(PPR)
metre
(PPR)
metre
(PPR)
metre
(PPR)
metre
(PPR)
metre
- polymer (PPR)
metre
- polymer (PPR)
metre
- polymer (PPR)
metre
- polymer (PPR)
metre
- polymer (PPR)
metre
(CPVC) pipe 15
metre
8640
8641
8642
Rate
Rs.
29.00
5.00
4.40
2.30
8.00
645.00
700.00
1076.00
1290.00
29.00
44.00
68.00
111.00
176.00
257.00
400.00
575.00
917.00
962.00
2028.00
45.00
55.00
78.00
105.00
150.00
245.00
783.00
Code
No
45
Description
Unit
8643
8644
8645
8646
8647
8648
8654
8655
8656
8657
8649
8650
8651
8652
8653
8658
8659
8660
8661
8662
8663
sqm
each
each
each
each
each
metre
cum
sqm
kg
1000 Nos
Mechanised Autoclaved fly ash lime bricks.
sqm
Water proof ply 12mm thick.
Aluminium casement window fastener (Anodised
each
AC 15 )
Aluminium casement window fastener (powder
each
coated ).
Aluminium casement window fastener (polyester
each
powder coated).
Aluminium round shape handle (anodised AC 15)
each
8664
8665
8666
8667
8668
8669
each
sqm
each
8670
8671
each
Mangalore tiles 20mm thick.
Precoated galvanised iron profile sheet 0.50 mm
sqm
TCT
8672
metre
Rate
Rs.
1030.00
1430.00
2490.00
281.00
25.00
1980.00
145.60
161.20
208.00
390.00
715.00
1.40
1650.00
544.00
50.00
2200.00
572.00
30.00
33.00
35.00
37.00
41.00
43.00
21.00
400.00
474.00
25.00
9.50
325.00
330.00
Code
No
46
Description
Unit
metre
metre
metre
8673
8674
8675
8676
8677
8678
metre
Precoated galvanised steel barge board.
sqm
Precoated galvanised steel crimp curve
1mm thick 35mm wide bright finished stainless
metre
steel piano hinges .
8683
8684
8685
8686
8687
8688
8689
kg
Thermoplastic paint
kg
Glass beads
Interlocking C.C. paver block ( 60 mm thick, Msqm
30 )
8690
8691
8692
8693
8694
8695
8696
8697
8698
8699
8700
8703
8704
8705
8706
sqm
sqm
each
cum
sqm
High intensity retro - reflective sheet.
Punched tape concertina coil 600 m dia. 10m
openable length (Total
bundle
length 90m)
metre
RBT reinforced barbed wire.
each set
Turn buckle and strengthening bolt.
Precast pavement slab 450 x 450 x 50mm (M 30).
Chain link fabric fencing mesh of size 50x50mm
made of G.I. wire of
dia. 4mm.
Chain link fabric fencing mesh of size 50x50mm
made of G.I. wire of
dia. 4mm, PVC coated to outer dia. 5mm.
Chain link fabric fencing mesh of size 25x25mm
made of G.I. wire of
dia. 3mm.
Stainless steel cramps with nuts, bolts and
washer for dry stone
cladding .
8 mm thick tapered edge calcium silicate board .
each
sqm
sqm
sqm
each
sqm
sqm
10 mm thick calcium silicate board.
set
Telescopic drawer channels 300mm long .
Stainless steel roller for sliding arrangement in
racks/ cupboards/
each
cabinets shutter .
50mmX42mmX2mm thick Factory made door
frame of PVC extruded
metre
sections in white, grey or wooden finish
25mm thick factory made PVC flush door shutter
sqm
i/c carriage.
8707
8708
Rate
Rs.
330.00
360.00
360.00
330.00
420.00
30.00
325.00
360.00
560.00
3500.00
67.22
68.00
225.00
1400.00
650.00
7.50
35.00
40.00
225.00
250.00
300.00
200.00
194.00
323.00
92.00
5.00
117.00
1975.00
333.00
1580.00
Code
No
8710
47
Description
Unit
8713
8714
8715
8716
8717
8711
8719
8720
8721
each
each
8722
8723
8724
8725
8726
8727
8730
8731
9999
cent
sqm
sqm
1.0mm thick decorative laminated sheet
30 mm thick factory made glass fiber reinforced
plastic flush door
sqm
shutter i/c carriage.
per kg
High polymer modified quickset tile adhesive.
L.S.
Sundries
Rate
Rs.
223.00
1975.00
3520.00
13.50
10.00
152.50
130.00
19.00
34.00
20.00
1.50
60.00
740.00
690.00
405.00
330.00
1960.00
13.75
1.00
(Carriage
including
stacking)
by Mechanical Transport
loading,
Unloading and
Note: - These rates are exclusive of contractors profit and overhead charges.
Code
No
Description
2200
2201
2202
2203
Steam coal
Bricks
Stone aggregate below 40 mm nominal size
Coarse sand
2204
2205
2206
Timber
Steel
Stone aggregate 40 mm nominal size and above
2207
2208
2209
Brick tiles
Lime
Cement
Unit
tonne
1000 Nos
cum
cum
cum
tonne
cum
1000 Nos
cum
tonne
2224
tonne
Tar bitumen
cum
Soling stone & masonry stone
Stone blocks white & red sand stone & kota stone
tonne
slab
100 metre
S.W. pipes100 mm dia
2225
2226
2227
2228
2229
2241
2242
2211
2215
2216
100 metre
100 metre
100 metre
100 metre
100 metre
cum
cum
2262
cum
Brick aggregate
Fine sand (1 part badarpur sand : 2 parts jamuna
cum
sand)
cum
Fly ash
2264
2265
2266
Rubbish
Moorum
Surkhi
2260
2261
cum
cum
cum
48
BASIC RATES
0.4 CARRIAGE CODES
Rate
Rs.
60.81
141.88
53.21
53.21
60.81
47.29
57.83
85.13
53.21
47.29
53.21
62.60
47.29
70.94
141.88
236.47
337.82
405.38
506.73
66.51
57.83
57.83
53.21
53.21
53.21
53.21
53.21
Code
No
Description
2267
2268
Stone dust
Marble dust and marble chips
2271
2273
2275
2281
2287
2290
2299
2302
2303
2308
2309
2311
2314
2317
Red bajri
Barbed wire
Sludge
2319
2320
2321
2322
2323
2324
2325
2326
2327
2328
2329
2330
2331
2332
2333
2334
Unit
cum
cum
tonne
tonne
100 metre
100 metre
100 metre
100 metre
100 metre
tonne
100 metre
tonne
tonne
cum
tonne
cum
100 metre
100 metre
100 metre
100 metre
100 metre
100 metre
100 metre
100 metre
100 metre
100 metre
100 metre
100 metre
100 metre
100 metre
100 metre
100 metre
49
Rate
Rs.
53.21
53.21
47.29
47.29
116.30
193.83
448.05
553.80
1292.20
47.29
1938.30
47.29
47.29
53.21
47.29
57.83
116.30
155.35
193.83
315.30
448.05
553.80
775.32
1057.26
1292.20
1292.20
1938.30
1292.20
2907.45
3876.61
3876.61
3876.61
Code
No
Description
2335
2341
Jamuna sand
Pig lead
2342
2343
2344
2345
Solvent/ Diesel.
Ductile iron pipes (k7) 100 mm dia
Cast iron pipes 150 mm dia
Cast iron pipes 200 mm dia
2346
2347
2348
2349
2350
2351
2352
2353
2355
2356
2357
Unit
cum
tonne
quintal
100 metre
100 metre
100 metre
100 metre
100 metre
100 metre
100 metre
100 metre
100 metre
100 metre
100 metre
100 metre
100 metre
100 metre
50
Rate
Rs.
53.21
47.29
5.32
116.30
193.83
315.30
448.05
553.80
775.32
1057.26
1292.20
1292.20
1938.30
1938.30
1938.30
2907.45
3876.61
CARRIAGE OF M
51
GE OF MATERIALS
Lead
in km
Average
speed
Nos of
Trips
N=8/
(2L/S)+1
1
1 Km
2 Km
3 Km
4 Km
5 Km
6 Km
7 Km
8 Km
9 Km
10Km
11Km
12Km
13Km
14Km
15Km
16Km
17Km
18Km
19Km
20Km
2
16.00 Km
17.00 Km
17.50 Km
18.00 Km
18.50 Km
19.00 Km
19.50 Km
20.00 Km
20.50 Km
21.00 Km
21.50 Km
22.00 Km
22.50 Km
23.00 Km
23.50 Km
24.00 Km
24.50 Km
25.00 Km
25.50 Km
26.00 Km
3
7.11
6.48
5.96
5.54
5.19
4.90
4.66
4.44
4.26
4.10
3.95
3.83
3.71
3.61
3.51
3.43
3.35
3.28
3.21
3.15
53
Nos of
km
Done
in one
Day
(2NL+6)
4
20.22
31.92
41.76
50.32
57.90
64.80
71.24
77.04
82.68
88.00
92.90
97.92
102.46
107.08
111.30
115.76
119.90
124.08
127.98
132.00
Litres of
Diesel
consum
ed
@ 5 km
per Litre
5
4.04
6.38
8.35
10.06
11.58
12.96
14.25
15.41
16.54
17.60
18.58
19.58
20.49
21.42
22.26
23.15
23.98
24.82
25.60
26.40
Code
0005
0114
0115
1235
5001
Cost of
Diesel
(1235)
@ Rs per
Litre
Material Name
Hire Charges of truck
Beldar
Coolie
High Speed Diesel
Mobil Oil
Litres of
Cost of
Mobil oil
Mobil oil
consumed
(5001)
@ 140 km
@ Rs per
per Litre
Litre
6
122.21
193.00
252.59
304.32
350.30
392.04
431.06
466.15
500.34
532.40
562.05
592.30
619.82
647.96
673.37
700.29
725.40
750.81
774.40
798.60
7
0.144
0.228
0.298
0.359
0.414
0.463
0.509
0.550
0.591
0.629
0.664
0.699
0.732
0.765
0.795
0.827
0.856
0.886
0.914
0.943
8
13.68
21.66
28.31
34.11
39.33
43.99
48.36
52.25
56.15
59.76
63.08
66.41
69.54
72.68
75.53
78.57
81.32
84.17
86.83
89.59
ge of Materials
Rate
1008.00
135.25
135.25
30.25
95.00
Hire charges
of truck
(0005)
@ Rs per
Day
9
811.50
811.50
811.50
811.50
811.50
811.50
811.50
811.50
811.50
811.50
811.50
811.50
811.50
811.50
811.50
811.50
811.50
811.50
811.50
811.50
10
1008.00
1008.00
1008.00
1008.00
1008.00
1008.00
1008.00
1008.00
1008.00
1008.00
1008.00
1008.00
1008.00
1008.00
1008.00
1008.00
1008.00
1008.00
1008.00
1008.00
Total
Cost=
6+8+9+10
Cost
per Trip
= col. 11/
col. 3
11
1955.39
2034.16
2100.40
2157.93
2209.13
2255.53
2298.92
2337.90
2375.99
2411.66
2444.63
2478.21
2508.86
2540.14
2568.40
2598.36
2626.22
2654.48
2680.73
2707.69
12
275.02
313.91
352.42
389.52
425.65
460.31
493.33
526.55
557.74
588.21
618.89
647.05
676.24
703.64
731.74
757.54
783.95
809.29
835.12
859.58
Increase
in cost
per km
over
previous
km
13
34.66
33.02
33.22
31.19
30.47
30.68
28.16
29.19
27.40
28.10
25.80
26.41
25.35
25.83
24.47
]
] ]
]
]
]
]]
]
]
Average
cost per
additional
km after
first 5,10
and 20 km
14
]
] ]
]
]
]
]]
]
]
32.51
27.14
1
21
22
23
24
25
26
27
28
29
30
Km
Km
Km
Km
Km
Km
Km
Km
Km
Km
Notes
2
26.50
27.00
27.50
28.00
28.50
29.00
29.50
30.00
30.50
31.00
Km
Km
Km
Km
Km
Km
Km
Km
Km
Km
3.09
3.04
2.99
2.95
2.90
2.86
2.83
2.79
2.76
2.73
135.78
139.76
143.54
147.60
151.00
154.72
158.82
162.24
166.08
169.80
27.16
27.95
28.71
29.52
30.20
30.94
31.76
32.45
33.22
33.96
821.59
845.49
868.48
892.98
913.55
935.94
960.74
981.61
1004.91
1027.29
8
2L + 1
s
where L= Load in km., S= Speed in km per hour, 1 hour is allowed for loadi
54
7
10
11
0.970
0.998
1.025
1.054
1.079
1.105
1.134
1.159
1.186
1.213
92.14
94.81
97.38
100.13
102.51
104.98
107.73
110.11
112.67
115.24
811.50
811.50
811.50
811.50
811.50
811.50
811.50
811.50
811.50
811.50
1008.00
1008.00
1008.00
1008.00
1008.00
1008.00
1008.00
1008.00
1008.00
1008.00
2733.23
2759.80
2785.36
2812.61
2835.56
2860.42
2887.97
2911.22
2937.08
2962.03
12
13
884.54
907.83
931.56
953.43
977.78
1000.15
1020.48
1043.45
1064.16
1084.99
24 96
23. 29
23 73
21. 87
24 35
22 37
20. 34
22. 96
20. 71
20. 83
14
]
]]
]
]
22.54
S.No
1
1.1.1
1.1.2
1.1.3
1.1.4
1.1.5
1.1.6
1.1.7
1.1.8
1.1.9
1.1.10
1.1.11
1.1.12
55
Unit
of
rates
C.P. &
Over
heads
@ 15%
capacity
per Trip
Net Qty
Payable
after
deduction
for
looseness
cum
15%
6.4
7.36
4
8
cum
cum
cum
cum
15%
15%
15%
15%
7.36
cum
15%
8
3000
6.8
3000
15%
15%
Brick Tiles
5000
cum
1000
Nos
1000
Nos
tonne
9
7
tonne
cum
15%
15%
Material
8
8
8
8
8
9
7
5000
15%
15%
55
Carriage of Materials
y Mechanical Transport
1km
2km
5km
Beyond
5 km upto
10 km
per km
Beyond
10 km
upto 20
km per
km
As per Col.
A
14 of Data Sheet
B
C
Net Qty Payable
13
14
Beyond
20 km per
addl.
km
10
11
12
39.53
45.13
55.99
50.66
61.19
4.67
3.90
3.24
49.42
42.97
79.07
39.53
56.41
49.05
90.25
45.13
69.99
60.86
111.99
55.99
63.32
55.07
101.32
50.66
76.48
66.51
122.37
61.19
5.84
5.08
9.35
4.67
4.88
4.24
7.80
3.90
4.05
3.52
6.48
3.24
42.97
49.05
60.86
55.07
66.51
5.08
4.24
3.52
46.51
105.42
53.09
120.33
65.87
149.32
59.60
135.09
71.99
163.17
5.50
12.46
4.59
10.40
3.81
8.64
63.25
72.20
89.59
81.06
97.90
7.48
6.24
5.18
35.14
40.11
49.77
45.03
54.39
4.15
3.47
2.88
35.14
45.18
40.11
51.57
49.77
63.99
45.03
57.90
54.39
69.93
4.15
5.34
3.47
4.46
2.88
3.70
Remarks
15
1
1.1.13
1.1.14
1.1.15
1.1.16
1.1.16.1
1.1.16.2
1.1.16.3
1.1.16.4
1.1.16.5
1.1.16.6
1.1.16.7
1.1.16.8
1.1.16.9
1.1.16.10
1.1.16.11
1.1.17
1.1.17.1
1.1.17.2
1.1.17.3
1.1.17.4
1.1.17.5
1.1.17.6
1.1.17.7
1.1.17.8
1.1.17.9
1.1.17.10
1.1.17.11
1.1.17.12
2
Tar bitumen
Solvent
Steam coal
S.W. pipe
100 mm dia
150 mm dia
200 mm dia
230 mm dia
250 mm dia
300 mm dia
350 mm dia
400 mm dia
450 mm dia
500 mm dia
600 mm dia
R.C.C. pipes, A.C. pipes,
steel cylinder, R.C. pipes,
C.I. pipes, C.I. pipes and
unreinforced cement pipes
100 mm dia
125 mm dia
150 mm dia
200 mm dia
250 mm dia
300 mm dia
350 mm dia
400 mm dia
450 mm & 500 mm dia
600, 700, 750 & 800 mm
900 mm dia
1000, 1100 & 1200 mm
dia
56
3
8
80
7
4
8
80
7
5
tonne
qtl
tonne
6
15%
15%
15%
7
39.53
3.95
45.18
600
300
180
126
105
84
60
42
33
30
24
600
300
180
126
105
84
60
42
33
30
24
100 m
100 m
100 m
100 m
100 m
100 m
100 m
100 m
100 m
100 m
100 m
15%
15%
15%
15%
15%
15%
15%
15%
15%
15%
15%
52.71
105.42
175.71
251.01
301.21
376.52
527.12
753.03
958.40
1054.24
1317.80
366
274
219.60
135
95
76.86
54.9
40.26
32.94
21.96
14.64
10.98
366
274
219.60
135
95
76.86
54.9
40.26
32.94
21.96
14.64
10.98
100 m
100 m
100 m
100 m
100 m
100 m
100 m
100 m
100 m
100 m
100 m
100 m
15%
15%
15%
15%
15%
15%
15%
15%
15%
15%
15%
15%
86.41
115.43
144.02
234.28
332.92
411.49
576.09
785.58
960.15
1440.22
2160.33
2880.44
8
45.13
4.51
51.57
9
50.66
5.07
57.90
10
55.99
5.60
63.99
11
61.19
6.12
69.93
12
4.67
0.47
5.34
60.17
120.33
200.56
286.51
343.81
429.76
601.67
859.53
1,093.94
1,203.34
1,504.17
67.55
135.09
225.15
321.65
385.98
482.47
675.46
964.95
1228.12
1350.93
1688.66
74.66
149.32
248.86
355.51
426.62
533.27
746.58
1066.54
1357.41
1493.15
1866.44
81.58
163.17
271.94
388.49
466.19
582.74
815.83
1165.47
1483.33
1631.66
2039.58
6.23
12.46
20.77
29.67
35.61
44.51
62.31
89.02
113.30
124.63
155.79
98.63
131.75
164.39
267.41
380.00
469.69
657.56
896.67
1095.93
1643.90
2465.85
3287.80
110.73
147.91
184.55
300.21
426.61
527.29
738.21
1006.65
1230.35
1845.53
2768.30
3691.06
122.39
163.48
203.98
331.81
471.52
582.81
815.93
1112.63
1359.88
2039.83
3059.74
4079.65
133.74
178.65
222.90
362.59
515.26
636.87
891.62
1215.84
1486.03
2229.05
3343.57
4458.10
10.22
13.65
17.03
27.70
39.36
48.64
68.10
92.87
113.50
170.26
255.39
340.51
13
3.90
0.39
4.46
14
3.24
0.32
3.70
5.20
10.40
17.34
24.77
29.72
37.15
52.01
74.30
94.57
104.03
130.03
4.32
8.64
14.40
20.57
24.69
30.86
43.20
61.72
78.55
86.41
108.01
8.53
11.39
14.21
23.12
32.85
40.60
56.85
77.52
94.74
142.11
213.17
284.23
7.08
9.46
11.80
19.20
27.29
33.73
47.22
64.39
78.69
118.04
177.06
236.08
15
1.2
Code
0114
0115
The following labour work for 8 hours a day will carry following material upto 1st 50 m as given below :
0114/0115 Beldars (Male/ Female) 7 .67 Nos @
NOTE :
S. No
Material
1
1.2.1
2
Lime, mooram building
rubbish
Earth
Manure or sludge
Excavated rock
Sand, stone aggregate
below 40 mm nominal
size
Stone aggregate 40 mm 28 cum
nominal size and above
Soling stone
Bricks
Brick Tiles, Allahabad
roofing tiles (Flat or
round)
Steam coal
1.2.2
1.2.3
1.2.4
1.2.5
1.2.6
1.2.7
1.2.8
1.2.9
1.2.10
57
abour including loading, unloading and stacking for lead less than 0.5 KM
Data Sheet for Analysis of Rates
Name
Beldar
Coolie
st 50 m as given below :
Rs
Unit
Day
Day
Rate
135.25
135.25
135.25
1037.37 (X)
35 cum
28 cum
15000 nos
24000 nos
30 tonnes
Rs
135.25
(X)
1,037.37
225.87 (Y)
Capacity
per Trip
Net Qty
to be paid
after deduction for
looseness
Unit of
Rates
C.P. &
Over
heads
@ 15%
Cost per
8 hours
day
3
35 cum
4
35 cum
5
1 cum
6
15%
7
1,192.97
35 cum
35 cum
35 cum
28 cum
28 cum
32.2 cum
17.5 cum
28 cum
1 cum
1 cum
1 cum
1 cum
15%
15%
15%
15%
1,192.97
1,192.97
1,192.97
1,192.97
28 cum
25.9 cum
1 cum
15%
1,192.97
28 cum
15000 Nos
24000 Nos
23.8 cum
15000 Nos
24000 Nos
1 cum
1000 Nos
1000 Nos
15%
15%
15%
1,192.97
1,192.97
1,192.97
30 tonne
30 tonne
1 tonne
1,500.%
1,192.97
(X)
8
34.08
9
7.42
42.61
37.05
68.17
42.61
9.28
8.07
14.84
9.28
46.06
10.03
50.12
79.53
49.71
10.91
17.32
10.82
39.77
8.66
cost for
1st 50
metres
58
1.0 Carriage of M
Material Name
Beldar
Coolie
The following labour works for 8 hours a day and will carry following material as given below:
S. No
Material
1
1.2.11
2
Stone blocks, G.I.,
C.I.pipes below 100 mm
dia and other heavy
materials
Cement
Steel
Timber
Tar bitumen etc
S.W. pipe
100 mm dia
150 mm dia
200 mm dia
230 mm dia
250 mm dia
300 mm dia
350 mm dia
400 mm dia
450 mm dia
500 mm dia
600 mm dia
R.C.C. pipes, steel
cylinder, R.C. pipes, C.I.
pipes, and unrein-forced
cement pipes
100 mm dia
125 mm dia
150 mm dia
200 mm dia
1.2.12
1.2.13
1.2.14
1.2.15
1.2.16
1.2.16.1
1.2.16.2
1.2.16.3
1.2.16.4
1.2.16.5
1.2.16.6
1.2.16.7
1.2.16.8
1.2.16.9
1.2.16.10
1.2.16.11
1.2.17
1.2.17.1
1.2.17.2
1.2.17.3
1.2.17.4
58
Rate
135.25
135.25
s given below:
= 1244.30 (X)
es lead including loading and
Capacity
per Trip
Net Qty
to be paid
after deduction for
looseness
Unit of
Rates
C.P.&
Over
head
@15%
3
46 t
4
46 t
5
1 tonne
6
15%
7
1,430.95
57.99 t
27 t
42 cum
46 t
1 cum
1 tonne
1 cum
1 tonne
15%
1,430.95
1,430.95
1,430.95
1,430.95
2298 m
1398 m
999 m
780 m
600 m
420 m
300 m
240 m
198 m
162 m
132 m
100 m
100 m
100 m
100 m
100 m
100 m
100 m
100 m
100 m
100 m
100 m
15%
15%
15%
15%
15%
15%
15%
15%
15%
15%
15%
1,430.95
1,430.95
1,430.95
1,430.95
1,430.95
1,430.95
1,430.95
1,430.95
1,430.95
1,430.95
1,430.95
1702 m
1391 m
1208 m
805 m
100 m
100 m
100 m
100 m
15%
15%
15%
15%
1,430.95
1,430.95
1,430.95
1,430.95
57.99 t
27 t
42 cum
46 t
2298 m
1398 m
999 m
780 m
600 m
420 m
300 m
240 m
198 m
162 m
132 m
1702 m
1391 m
1208 m
805 m
15%
Cost per
8 hours
day
cost for
1st 50
metres
8
31.11
9
4.56
24.68
53.00
34.07
31.11
3.62
7.78
5.00
4.56
62.27
102.36
143.24
183.45
238.49
340.70
476.98
596.23
722.70
883.30
1084.05
9.14
15.02
21.02
26.92
35.00
49.99
69.99
87.49
106.05
129.61
159.07
84.07
102.87
118.46
177.76
12.34
15.10
17.38
26.08
1
1.2.17.5
1.2.17.6
1.2.17.7
1.2.17.8
1.2.17.9
1.2.17.10
1.2.18
1.2.18.1
1.2.18.2
1.2.18.3
1.2.18.4
2
250 mm dia
300 mm dia
350 mm dia
400 mm dia
450 mm dia & 500 mm dia
600, 700, 750 & 800 mm dia 150 m
Asbestors cement pipes
50 mm dia
80 mm dia
100 mm dia
150 mm dia
59
3
458 m
366 m
256 m
220 m
165 m
10064 m
3660 m
2562 m
1830 m
4
458 m
366 m
256 m
220 m
165 m
150 m
5
100 m
100 m
100 m
100 m
100 m
100 m
6
15%
15%
15%
15%
15%
15%
7
1,430.95
1,430.95
1,430.95
1,430.95
1,430.95
1,430.95
10064 m
3660 m
2562 m
1830 m
100 m
100 m
100 m
100 m
15%
15%
15%
15%
1,430.95
1,430.95
1,430.95
1,430.95
8
312.43
390.97
558.96
650.43
867.24
953.96
9
45.85
57.37
82.02
95.44
127.26
139.98
14.22
39.10
55.85
78.19
2.09
5.74
8.20
11.47
EARTH
61
EARTH WORK
63
2.1 :
2.1.1
Code
0114
0115
Unit
Quantity
Day
Day
7.20
6.00
2.2.1
Code
Description
2.2 :
0114
0115
0101
0113
0003
1235
2342
9999
Unit
Quantity
Day
Day
Day
Day
5.90
3.60
0.40
0.008
Day
litre
quintal
L.S.
0.008
0.144
0.0014
2.73
Rate
Amount
135.25
135.25
973.80
811.50
1 785.30
17.85
1 803.15
270.47
2 073.62
2 073.60
Rate
Amount
135.25
135.25
138.45
135.25
797.98
486.90
55.38
1.08
1000.00
30.25
5.32
1.00
8.00
4.36
0.01
2.73
1 356.44
13.56
1 370.00
205.50
1 575.50
157.55
157.55
64
2.3 :
2.3.1
Code
0003
0113
1235
2342
9999
2.4
Code
Description
Details of cost for 10 cum.
LabourChokidar
Roller charges & Hire Charges
Diesel
Carriage of diesel
Sundries
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and
overheads
Cost of 10 cum.
Cost of 1 cum.
Say
0114
0115
0101
0113
0003
1235
2342
9999
Day
Day
Day
2.20
3.60
0.40
Day
Day
litre
quintal
L.S.
0.008
0.008
0.144
0.0014
2.73
Unit
Quantity
Day
Day
litre
quintal
L.S.
0.008
0.008
0.144
0.0014
1.82
Amount
135.25
135.5
138.45
297.55
486.90
55.38
1000.00
135.25
30.25
5.32
1.00
8.00
1.08
4.36
0.01
2.73
856.01
8.56
864.57
129.69
994.26
99.43
99.45
Amount
135.25
1000.00
30.25
5.32
1.00
1.08
8.00
4.36
0.01
1.82
15.27
0.15
15.42
2.31
17.73
1.77
1.75
65
2.5
Code
0101
Day
0.4O
2.6
2.6.1
Code
0020
0018
0128
0115
2.7
2.7.1
Code
0020
0017
0132
0133
0134
0114
0115
9999
Unit
Quantity
Day
Day
0.04125
0.04125
Day
Day
0.40
4.00
Cost of 1 cum.
Say
banking
Rate
Amount
138.45
55.38
55.38
0.55
55.93
8.39
64.32
6.43
6.45
ns (Hydraulic excavator)/
depth. 1.5m in width as
cavated earth, lead upto
elled and neatly dressed.
Rate
Amount
6000.00 247.50
800.00 33.00
138.45
135.25
55.38
541
876.88
8.77
885.65
132.85
1018.50
101.85
101.85
ns (Hydraulic Excavator)/
depth, 1.5m in width as
cavated earth, lead upto
be levelled and neatly
Rate
Amount
6 000.00 375
1 030.00
135.25
135.25
135.25
135.25
135.25
1.00
64.38
95.35
215.05
48.01
191.38
313.78
10.79
1 313.74
13.14
1 326.88
199.03
1 525.91
152.59
152.60
66
2.7.2
Code
Description
2.7
0020
0017
0132
0133
0134
0114
0115
0325
0326
9999
2.7
2.7.3
Code
0020
0017
0132
0133
0135
0103
0114
0115
9999
Unit
Quantity
Day
0.125
Day
Day
Day
Day
Day
Day
kilogram
each
L.S.
0.125
1.06
2.825
0.885
1.325
2.32
3.93
4.00
16.12
ns (Hydraulic Excavator)/
n depth, 1.5m in width as
xcavated earth, lead upto
o be levelled and neatly
Rate
Amount
6 000.00 750.00
1 030.00
135.25
135.25
135.25
135.25
135.25
25.00
10.00
1.00
128.75
143.36
382.08
119.70
179.21
313.78
98.25
40.00
16.12
2 171.25
21.71
2 192.96
328.94
2 521.90
252.19
252.20
Amount
6 000.00
1 030.00
135.25
135.25
138.45
141.60
135.25
135.25
1.00
750.00
128.75
334.07
811.50
146.76
24.78
202.88
385.46
16.12
2 800.32
28.00
2 828.32
424.25
3 252.57
325.26
325.25
67
2.8
2.8.1
Code
0020
0018
0128
0115
2.9
2.9.1
Code
0020
0017
0132
0133
0134
0114
0115
9999
Day 0.04125
Day 0.04125
6 000.00
800.00
Day 0.40
Day 4.10
138.45
135.25
means (Hydraulic
es or drains (not
uding dressing of
including getting
excavated soil as
Amount
247.50
33.00
55.38
554.52
890.40
8.90
899.30
134.90
1034.20
103.42
103.40
aulic Excavator)/
ot exceeding 1.5
ing of sides and
getting out the
soils as directed,
Amount
375.00
64.38
119.70
238.72
71.68
191.38
325.95
13.52
1 400.33
14.00
1 414.33
212.15
1 626.48
162.65
162.65
68
Code
Description
2.9
2.9.2
Code
0020
0017
0132
0133
0134
0114
0115
0325
0326
9999
2.9
2.9.3
Code
0020
0017
0132
0133
0135
0103
0114
0115
9999
Unit
Quantity
Unit
Quantity
Day
0.125
Day
0.125
Day
Day
Day
Day
Day
kilogram
each
L.S.
1.24
3
1.06
1.325
2.41
6.42
7
18.85
Unit
Quantity
Day
0.125
Day
0.125
Day
Day
Day
Day
Day
Day
L.S.
2.65
6.175
1.06
0.175
1.5
2.94
17.94
Rate
Amount
Amount
6 000.00 750.00
1 030.00 128.75
135.25
135.25
135.25
135.25
135.25
25.00
10.00
1.00
167.71
405.75
143.36
179.21
325.95
160.50
70.00
18.85
2 350.08
23.50
2 373.58
356.04
2 729.62
272.96
272.95
Amount
6 000.00 750
1 030.00 128.75
135.25
135.25
138.45
141.60
135.25
135.25
1.00
358.41
835.17
146.76
24.78
202.88
397.64
17.94
2 862.33
28.62
2 890.95
433.64
3 324.59
332.46
332.45
69
Code
Description
2.10
Description
2.10
2.10.1
2.10.1.2
Code
Unit QuantityRate
Unit QuantityRate
cum 85.05
cum 85.05
103.40
45.70
cum 84.89
cum 84.89
103.40
45.70
Amount
Amount
8 794.17
3 886.78
12 680.95
12 680.95
70.45
70.45
8 777.63
3 879.47
12 657.10
12 657.10
115.06
115.05
70
Code
Description
Unit QuantityRate
2.10
2.10.1
2.10.1.3 Pipes, cables etc. exceeding 300 mm dia but not exceeding 600 mm.
Code
Description
Details of cost for 60m length of a pipe of an
average dia. say 450mm.
Slope assumed 1 in 200.
Earth work and fillingMinimum depth of trench 0.75+0.45= 1.20m
Average depth = (1.50+1.20)/2 =1.35
Width = 0.40 + 0.45 = 0.85 m
60x0.85xl.35 = 68.85 cum
5% for collars = 3.44 cum
Total = 72.29 cum
Rate vide item no. 2.8.1
Rate vide item no. 2.25
TOTAL
Cost of 60m length of pipe
Cost for lm length of pipe
Say
2.11
Code
Unit QuantityRate
cum 72.29
cum 72.29
103.40
45.70
Extra for excavating trenches for pipes, cables etc. in all kinds of soil
for depth exceeding 1.5 m, but not exceeding 3 m.
(Rate is over corresponding basic item
Description
Details of cost for 300m length of pipe of an
average dia. say 200mm
Slope assumed 1 in 200.
100x0.60x1.75= 105.00 cum
200x0.60x2.00 = 240.00 cum.
= 345.00 cum.
Collars 5% = 17.25 cum.
= 362.25 cum.
Rate vide item no. 2.8.1
Rate vide item no. 2.25
1/2x200xx1.60x1.00=160 cum
=362.25 cum.
Rate vide item no. 2.6.1
Rate vide item no.2.25
Extra for addition lift
1/2x200x0.60x1.50= 135.00 cum.
Collar 5% = 6.75
= 141.75 cum.
Rate vide item no. 2.26.1
Cost for 300 m. length of pipe
Extra over item 2.10.1.2 i.e.
Cost for 300 m. length of pipe upto 1.50 m.
depth
Extra cost for 300 metre= B-A
Extra cost for one metre= C/300
Percentage increase over item no 2.101.2
cum 362.25
cum 362.25
103.40
45.70
cum 160.00
cum 160.00
101.85
45.70
cum 141.75
18.90
metre300.00
115.05
=(Cx100)/A
say
2.12
Code
Extra for excavating trenches for pipes, cables, etc, in all kinds of soil
for depth exceeding 3 m in depth, but not exceeding 4.5 m.
(Rate is over corresponding basic item
Description
Details of cost for 100m length of pipe of an
average dia. say 200mm
Slope assumed 1 in 200.
Earth work and filling1x100x0.60x2= 120 cum
Collars 5% = 6 cum.
=126 cum.
Rate vide item no. 2.8.1
Rate vide item no. 2.25
Earth work
100x1.60x1.25= 200 cum
Rate vide item no. 2.6.1
Rate vide item no.2.25
Extra for additional lift
1x100x0.60x1.50 = 90 cum
2x0.50x100x0.60x0.50 = 30 cum
=120 cum
Collare 5% = 6
= 126 cum.
Rate vide item no. 2.26.1
Csot for 300 m. length of pipe
Extra over item 2.10.1.2 i.e.
Cost for 100 m. length of pipe upto 1.50 m.
depth
Extra cost for 100 metre= B-A
Extra cost for one metre= C/100
Percentage increase over item no 2.101.2
=(Cx100)/A
say
cum 126.00
cum 126.00
103.40
45.70
cum 200.00
cum 200.00
101.85
45.70
cum 126.00
18.90
metre100.00
115.05
Amount
7 474.79
3 303.65
10 778.44
10 778.44
179.64
179.65
37456.65
16554.82
16296.00
7312.00
2679.08
80298.55 (B)
-34515.00 (A)
45783.55 (C)
152.61
132.65
133.00%
per meter
13028.40
5758.20
20370.00
9140.00
2381.40
50678.00(B)
-11505.00 (A)
39173.00 (c)
391.73
340.49
340.00%
per meter
72
2.13
2.13.1
2.13.1.1 Pipes, cables etc. not exceeding 80 mm dia.
Code
0114
2.13
Description
Details of cost for 180 m length of a pipe of a
average dia. say 40mm.
Slope assumed 1 in 200
ExcavationQuantity same as in item No.2.10.1.1
Rate vide item no. 2.9.1
Refilling, ramming and watering
Rate vide item no. 2.25
Extra labour for ramming of rock
Beldars
TOTAL
Add for water charges @ 1% on (A)
TOTAL
Add for contractors profit and overheads @
15% onRs. (A+B)
Cost for 180 m. length of pipe
Cost for 1 m. length of pipe
Say
Unit QuantityRate
cum 85.05
162.65
cum 85.05
45.70
Day 2.00
135.25
2.13.2
2.13.2.2 Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia.
Code
0114
Description
Details of cost for 80 m length of pipe of an
average dia. Say 200mm.
Slope assumed 1 in 200
ExcavationMinimum depth of trench.
0.75+0.15+0.20 = 1.10m
Average depth = ( 1.10 + 1.50)/2 = 1.30m
Minimum width of trench
= 0.90m
80x0.90x1.30 = 93.60 cum.
Rate vide item no. 2.9.1
Refilling, ramming and watering
Rate vide item no. 2.25
Extra labour for ramming of rock
Beldars
TOTAL
Add for water charges @ 1% on A
TOTAL
Add for contractors profit and overheads @
15% on A+B
Cost for 80 m. length of pipe
Cost for 1.00 m length of pipe
Unit QuantityRate
cum 93.6
162.65
cum 93.6
45.7
Day 2.2
135.25
Say
Amount
13 833.38
3 886.78
270.50
17 990.66 (A)
2.70 (B)
17 993.36
40.98
18 034.34
100.19
100.20
15,224.04
4,277.52
297.55 (A)
19.799.11
2.98 (B)
19,802.09
45.08
19 847.17
248.09
248.10
73
Code
Description
Unit QuantityRate
2.13
2.13.1
2.13.1.3 Pipes, cables exceeding 300 mm dia but not exceeding 600mm dia
Code
0114
2.13
Description
Unit QuantityRate
Details of cost for 30 m. length of a pipe of an
average dia. say 450mm.
Slope assumed 1 in 200.
ExcavationMinimum depth of trench 0.75+0.15+0.15= 1.35m.
Average depth = 1.35+ 1.50 = 1.425 m.
Width of trench = 0.90 m.
30x0.90x1.425 =30.475 cum.
5% for collors = 1.924 cum
40.399 cum
Rate vide item no. 2.9.1
Refilling, ramming and watering
Rate vide item no. 2.25
Beldars
TOTAL
Add for water charges @ 1 % on (A)
TOTAL
Add for contractors profit and overheads @
15% on (A+B)
Cost for 30 m length of a pipe
Cost for one m length of a pipe
Say
cum 40.399
162.65
cum 40.399
Day 0.94
45.70
135.25
2.13.2
2.13.2.1 Pipes, cables etc. not exceeding 80 mm dia.
Code
0114
Description
Details of cost for 180 m length of a
pipe of a average dia. say 40mm.
Slope assumed 1 in 200
ExcavationQuantity same as in item No.2.10.1.1
Rate vide item no. 2.9.2
Refilling, ramming and watering
Rate vide item no. 2.25
Extra labour for ramming of rock
Beldars
TOTAL
Add for water charges @ 1 % on A
TOTAL
Add for contractors profit and overheads @
Unit QuantityRate
cum 85.05
272.95
cum 85.05
45.70
Day 2.50
135.25
15% on (A+B)
Cost for 180 m. length of pipe
Cost for lm. length of pipe
Say
2.13
2.13.2
2.13.2.2 Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm
Code
0114
dia.
Description
Details of cost for 80 m length of a pipe of an
average dia. say 200mm.
Slope assumed 1 in 200
ExcavationQuantity same as in item No.2.13.1.2
Rate vide item no. 2.92
Refilling, ramming and watering
Rate vide item no. 2.25
Extra labour for ramming of rock
Beldars
TOTAL
Add for water charges @ 1 % on A
TOTAL
Add for contractors profit and overheads @
15% on Rs. (A+B)
Cost for 80 m. length of pipe
Cost for lm. length of pipe
Say
Unit QuantityRate
cum 93.60
272.95
cum 93.60
45.70
Day 2.75
135.25
Amount
6 570.90
1 846.23
127.14 (A)
8 544.27
1.27 (B)
8 545.54
19.26
8 564.80
285.49
285.50
Amount
23214.40
3,886.79
38.12 (A)
27,439.31
3.38 (B)
27,442.69
51.22
27,493.91
152.74
152.75
exceeding 300 mm
Amount
25,548.12
4,277.52
371.94
30,197.58
3.72 (B)
30201.30
56.35
30,257.65
378.22
378.20
75
2.13
2.13.2
2.13.2.3 Pipes, cables etc. exceeding 300 mm dia but not exceeding 600mm
Code
0114
2.13
dia.
Description
Unit QuantityRate
cum 40.399
272.95
cum 40.399
45.70
Day 1.17
135.25
2.13.3
2.13.3.1 Pipes, cables etc. not exceeding 80 mm dia.
Code
0114
Description
Details of cost for 180 m length of a
pipe of a average dia. say 40mm.
Slope assumed 1 in 200
ExcavationQuantity same as in item No.2.10.1.1
Rate vide item no. 2.9.3
Refilling, ramming and watering
Rate vide item no. 2.25
Extra labour for ramming of rock
Beldars
TOTAL
Add for water charges @ 1 % on A
TOTAL
Add for contractors profit and overheads @
15% on (A+B)
Cost for 180 m. length of pipe
Cost for lm. length of pipe
Say
Unit QuantityRate
cum 85.05
332.45
cum 85.05
45.70
Day 2.50
135.25
exceeding 600mm
Amount
11,026.91
1,846.23
158.24(A)
13,031.38
1.58(B)
13,032.96
23.97
13,056.93
435.23
435.25
Amount
28,274.87
3,886.78
338.12 (A)
32,499.77
3.38 (B)
32,503.15
51.22
32,554.37
180.86
180.85
76
2.13
2.13.3
2.13.3.2
Code
0114
2.13
2.13.3
2.13.3.3
Code
0114
cum 93.60
cum 93.60
Day 2.75
332.45 31,117.32
45.70
4,277.52
332.45 13,430.65
45.70
1,846.23
135.25 158.24
15,435.12
1.58
15436.70
23.97
15,460.67
515.36
515.35
2.14
Code
0114
2.15
Code
Unit Quantity
Description
Details of cost for 300m length of a pipe of an
average dia. say 200mm.
Slope assumed 1 in 200.
Excavation100x0.90x1.50 =157.50 cum.
200x0.90x20.00 = 360.00 cum.
= 517.50 cum.
cum
517.50
Rate vide item no. 2.9.2
0.50x200x1.9x1 = 190 cum.
cum
190.00
Rate vide item no. 2.7.2
Refilling, ramming and watering
517.50+190.00 = 707.50 cum.
cum
707.50
Rate vide item no. 2.25
Extra for additional lift
0.50x300x0.90x1.50 = 202.50 cum.
cum
202.50
Rate vide item no.2.26.2
Extra labour for ramming of rock.
Day
16.50
Beldars
TOTAL
Add for water charges @ 1 % on (A)
TOTAL
Add for contractors profit and overheads @
15%on (A+B)
Cost for 300m length of pipe
Exta over item 2.13.2.2
Metre 300.00
Less cost of 300 m length of pipe upto 1.5m
depth
Extra cost for 300 m = X - Y
Extra cost for one m
Percentage increase over item 2.13.2.2 =
(Zxl00)/Y
Say
Extra for excavating trenches for pipes, cables, etc. in ordinary/ha
exceeding 3m in depth but not exceeding 4.5 m.
(Rate is over corresponding basic item
Description
Details of cost for 100m length of a pipe of an
average dia. say 200mm. Slope assumed 1 in
200
Max, depth assumed 3.50m
Excavation100x0.90x2 =180.00 cum.
Rate vide item no. 2.9.2
100x1.90x1.25 = 237.50 cum
Rate vide item no. 2.7.2
Extra for additional lift
1x100x0.90x1.50= 135.00
2x0.50x100x0.90x0.5=45
Total = 180 cum.
Ratevide item no. 2.26.2
Refilling, ramming and watering
180+237.50 = 417.50 cum.
Rate vide item no. 2.25
Extra labour for ramming of rock
cum
180.00
cum
237.50
cum
180.00
cum
417.50
0114
Beldars
TOTAL
Add for water charges. 1% on (A)
TOTAL
Add for contractors profit and overheads @
15% on A+B
Cost for 100m length of pipe
Exta over item 2.13.2.2
Less cost of 100 m length of pipe exceeding
1.5 m and upto 3 m depth
Extra cost for 100 m = X - Y
Extra cost for 1 m
Percentage increase over item 2.13.2.2 =
(Zxl00)/Y
Say
Day
9.25
Metre
100.00
2.16 :
2.16.1 :
Code
1198
Unit
Quantity
10 cud 213.75
10 cud 75.00
0302
2204
0112
0114
9999
metre
3.1875
cum
Day
Day
L.S.
1.3125
0.05
1
26.91
Amount
272.95 141251.63
252.20 47918.00
45.70
32332.75
33.85
6854.62
272.95 49131.00
252.20
59 897.50
33.85
6 093.00
45.70
19 079.75
135.25 1251.06(A)
135,452.31
12.51 (B)
135,464.82
189.54
135654.36(x)
378.20 37820.00(Y)
97834.36(Z)
978.34
258.68
259%
Rate
Amount
178.00 3 804.75
160.00 1 200.00
29.00
92.44
60.81
141.60
135.25
1.00
79.81
70.80
135.25
26.91
5 409.96
54.10
5 464.06
819.61
6 283.67
69.82
69.80
79
Code
Description
2.16 :
2.16.2 :
Code
1198
Unit
Quantity
Quantity
10 cudm 213.75
10 cudm 75.00
= 1200 dm3
Qty taken for cost of using once after
0302
2204
0112
0114
9999
metre
3.1875
cum
Day
Day
L.S.
1.3125
0.75
2.00
40.43
Rate
Amount
Rate
Amount
178.00 3 804.75
160.00 1 200.00
29.00
92.44
60.81
141.60
135.25
1.00
79.81
106.20
270.50
40.43
5 594.13
55.94
5 650.07
847.51
6 497.58
72.20
72.20
80
2.16 :
2.16.3 :
Code
1198
Description
Details of cost for a trench 30m long and 1.50m
deep area 2x30x 1.5=90 sqmMATERIALS
The Material can be used four times on the
same work and after use of material credit is
given @ 75% of cost
Poling boards of 2nd class Kail wood planks :
Unit
10 cudm
10 cudm
= 1200 dm3
Qty taken for cost of using once after
0302
2204
0112
0114
9999
2.17 :
2.17.1 :
Code
metre
cum
Day
Day
L.S.
Description
Details of cost for a manhole 1.2m x 1.0m
x1.5m- Surface area: 2x(1.2+1.0)x1.5 =
6.6sqm
MATERIALS
The Material can be used four times on the
same work and after use of material credit is
given @ 75% of cost
Unit
xceeding 4.50 m.
Quantity
Rate
Amount
213.75
178.00
3 804.75
75 00
160.00
1200.00
3.1875
29.00
92.44
1.3125
60.81
79.81
1.50
4.00
80.73
141.60
135.25
1.00
212.40
541.00
80.73
6011.13
60.11
6 071.24
910.69
6 981.93
77.58
77.60
Rate
Amount
81
Code
1198
Description
Poling boards of 2nd class Kail wood planks:
Unit
Quantity
10 cudm 15.6875
10 cudm 5.125
2204
0112
0114
9999
metre
0.4118
cum
0.1035
Day
Day
L.S.
0.06
0.12
2.73
2.17 :
1198
Description
Details of cost for a manhole 1.2m x 1.0m
x1.5m- Surface area: 2x(1.20+1.0)x1.50 =
6.6 sqm
MATERIALS
The Material can be used four times on the
same work and after use of material credit is
given @ 75% of cost
Poling boards of 2nd class Kail wood planks:
6.6x0.038 = 0.251 cum = 251 dm3
Qty taken for cost of using once after
deducting for credit = 251x x = 15.6875
Unit
Quantity
10 cudm 15.6875
dm3
Rate Amount
178.00 279.24
160.00 82.00
29.00
11.94
60.81
6.29
141.60 8.50
135.25 16.23
1.00
2.73
406.93
4.07
411.00
61.65
472.65
71.61
71.60
Amount
178.00 279.24
82
Code
1197
Description
Walling of 2nd class kail wood scantling
2x2x1.124x0.10x0.10 = 0.045 cum
2x2x0.924x0.10x0.10 = 0.037 cum.
Unit
QuantityRate
10 cudm 5.125
160.00
0302
2204
0112
0114
9999
metre
0.4118
29.00
cum
0.1035
60.81
Day
Day
L.S.
0.12
0.25
5.46
141.60
135.25
1.00
1198
Description
Details of cost for a manhole 1.2m x 1,0m
x 1.5m- Surface area: 2x( 1.2+1.0)x 1.5 =
6.6sqm
MATERIALS
The Material can be used four times on the
same work and after use of material credit is
given @ 75% of cost
Poling boards of 2nd class Kail wood planks:
Unit
QuantityRate
10 cudm 15.6875
178.00
10 cudm 5.125
160.00
Amount
82.00
11.94
6.29
16.99
33.81
5.46
435.73
4.36
440.09
66.01
506.10
76.68
76.70
279.24
82.00
83
Code
0302
2204
0112
0114
9999
Description
Safeda Balli struts (12.5mm dia and 1.50m
long)
2x2x0.924 = 3.696
2x2x0.724 = 2.896
Total of balli = 6.592m
Qty taken for cost of using once after
-deducting for credit = 6.592xx = 0.1035 m
CARRIAGE
Poling boards = 0.251 cum
Walling
= 0.082 cum.
Balli struts 3.14/4x(0.125)2 x6.59 = 0.081 cum.
Total of carriage = 0.414 cum x = 0.1035
cum
LABOUR:
Carpenter Ilnd class
Beldars
Sundries
TOTAL
Add for water charge @ 1 %
TOTAL
Add for contractors profit and over-heads @
15%
Cost of 6.6 sqm.
Cost per sqm.
Say
Unit
metre
QuantityRate
0.4118
29.00
cum
0.1035
60.81
Day
Day
L.S.
0.19
0.38
8.06
141.60
135.25
1.00
1198
Description
Details of cost for an area 30m long and 1.50m
deep-Area -30x1.50m = 45 sqm.
MATERIALS
The Material can be used four times on the
same work and after use of material credit is
given @ 75% of cost
Poling boards of 2nd class Kail wood planks
Unit
QuantityRate
10 cudm 106.875
178.00
1197
160.00
0302
2204
metre
1.59
29.00
cum
0.581
60.81
Rakingstruts3.14/4x(0.125)2 = 0.313cum
Amount
11.94
6.29
26.90
51.40
8.06
465.83
4.66
470.49
70.57
541.06
81.98
82.00
Amount
1 902.38
300.00
46.11
35.33
84
Code
0112
0114
9999
Description
Total of carriage = 2.323 cum x = 0.581
cum
LABOUR:
Carpenter Ilnd class
Beldars
Sundries
TOTAL
Add for water charge @ 1 %
TOTAL
Add for contractors profit and over-heads @
15%
Cost of 45 Sqm.
Cost per sqm.
Say
Unit
QuantityRate
Day
Day
L.S.
0.25
0.50
31.46
141.60
135.25
1.00
1198
Description
Details of cost for an area 30m long and 1.5m
deep-Area -30x 1,5m = 45 sqm.
MATERIALS
The Material can be used four times on the
same work and after use of material credit is
given @ 75% of cost
Unit
QuantityRate
106.875
Poling boards of 2nd class Kail wood plank 10 cudm
250x38mm : 45x0.038 = 1.71 cum
= 1710 dm3
178.00
10 cudm 18.75
160.00
2204
0112
0114
9,999
metre
Raking struts Safeda balleis 12mm dia : 17 x
1.5 = 25.5m
Qty taken for cost of using once after
deducting for credit = 25.5xx = 1.59 m
CARRIAGE
cum
Poling boards = 1.71 cum
Walling
= 0.30 cum
Raking struts 3.14/4x(0.125)2 = 0.313 cum
Total of carriage = 2.323 cum x = 0.581 cum
LABOUR:
Carpenter Ilnd class
Beldars
Sundries
TOTAL
Add for water charge @ 1 %
TOTAL
Add for contractors profit and over-heads @
Day
Day
L.S.
1.59
29.00
0.581
60.81
0.50
1.00
34.06
141.60
135.25
1.00
15%
Cost of 45 Sqm.
Cost per sqm.
Say
Amount
35.40
67.62
31.46
2 418.30
24.18
2 442.48
366.37
2 808.85
62.42
62.40
Amount
1 902.38
300.00
46.11
35.33
70.80
135.25
34.06
2 523.93
25.24
2 549.17
382.38
2 931.55
65.15
65.15
85
2.18 : Close timbering over areas including strutting, shoring and pac
(wherever required) etc. complete. (Measurements to be taken
timbered):
2.18.3 :
Code
1198
Description
Details of cost for an area 30m long and 1.5m
deep-Area -30x 1.5m = 45 sqm.
MATERIALS
The Material can be used four times on the
same work and after use of material credit is
given @ 75% of cost
Unit
QuantityRate
106.875
178.00
10 cudm 18.75
160.00
metre
1.59
29.00
0.58
60.81
0.75
1.50
47.58
141.60
135.25
1.00
2204
0112
0114
9999
Day
Day
L.S.
2.19 : Extra for planking, strutting and packing materials for cavities
required to be left permanently in position.
(Face area of timber permanently left to be measured).
Code
1198
Description
Details of cost for a trench 30m long and 1.5m
deep area 2x30x1.5=90 sqmMATERIALS
Unit
QuantityRate
10 cudm 2992.50
178.00
eding 4.5 m.
Amount
1,902.38
300.00
46.10
35.33
106.20
202.88
47.58
2 640.48
26.40
2 666.88
400.03
3 066.91
68.15
68.15
measured).
Amount
53266.50
86
Code
1197
0302
2204
Description
Unit
QuantityRate
10 cudm 1050.00
160.00
metre
44.63
29.00
cum
2.675
60.81
1198
Description
Details of cost for a trench of length 30m and
1.5m deep surface area - 2x30x 1.50 = 90 sqm.
MATERIALS:
The Material can be used four times on the
same work and after use of material credit is
given @ 75% of cost
Unit
QuantityRate
10 cudm 71.25
178.00
10 cudm 75.00
160.00
metre
3.18
29.00
cum
0.74
60.81
2204
Amount
16 800.00
1294.27
162.67
71523.44
715.23
72 238.67
10 835.80
83 074.47
923.05
923.05
1268.25
1 200.00
92.22
45.00
87
Code
0112
0114
9999
Description
Carpenter Ilnd class
Beldars
Sundries
TOTAL
Add for water charge @ 1 %
TOTAL
Add for contractors profit and over-heads @
15%
Cost of 90 Sqm
Cost per sqm.
Say
Unit
Day
Day
L.S.
QuantityRate
0.25
141.60
0.50
135.25
1.00
19.76
1198
Description
Details of cost for a trench of length 30m and
1.5m deep surface area - 2x30x1.5 = 90 sqm.
MATERIALS:
The Material can be used four times on the
same work and after use of material credit is
given @ 75% of cost
Unit
QuantityRate
10 cudm
71.25
178.00
10 cudm
Walling 100mmx 100mm: 4x30mx0.lmx0.lm
1.20cum=
=
75.00
160.00
metre
3.18
29.00
cum
0.74
60.81
Day
Day
L.S.
0.50
1.00
33.15
141.60
135.25
1.00
1197
2,204
CARRIAGE:
Poling boards = 1.14 cumWalling
= 1.20 cum
0112
0114
9999
Amount
35.40
67.62
19.76
2728.25
27.28
2755.53
413.33
3168.86
35.21
35.20
1268.25
1200.00
92.22
45.00
70.80
135.25
33.15
2 844.67
28.45
2 873.12
430.97
3 304.09
36.71
36.70
88
Code
1198
Unit
QuantityRate
10 cudm 71.25
178.00
10 cudm 75.00
160.00
metre
3.18
29.00
cum
0.74
60.81
Day
Day
L.S.
1.00
1.75
46.67
141.60
135.25
1.00
1.20cum=
2204
CARRIAGE:
Poling boards =1.14 cum
Walling
= 1.20 cum
Bailies struts 3.14/4x(0.125)2 = 0.63 cum
Tetal of carriage = 2.97 cum x = 0.74 cum
LABOUR:
0112
0114
9999
Description
Details of cost for a manhole 1.2x lm x 1.5m Surface area 2( 1.2+1.0)x 1.5 = 6.6 sqm
MATERIALS :
The Material can be used four times on the
same work and after use of material credit is
given @ 75% of cost
Unit
QuantityRate
1198
10 cudm 5.375
178.00
1268.25
1 200.00
92.22
45.00
141.60
236.69
46.67
3 030.43
30.30
3 060.73
459.11
3 519.84
39.11
39.10
Amount
95.68
89
Code
Description
Unit
QuantityRate
1197
10 cudm 3.00
160.00
metre
0.40
29.00
cum
0.053
60.81
Day
Day
L.S.
0.03
0.06
1.82
141.60
135.25
1.00
0302
2204
0112
0114
9999
1198
Description
Details of cost for a manhole 1.2x 1mx 1.5m
Surface area2(1.2+1.0)xl.5 = 6.6 sqm
MATERIALS :
The Material can be used four times on the
same work and after use of material credit is
given @ 75% of cost
Unit
QuantityRate
10 cudm 5.375
178.00
10 cudm 3.00
160.00
1197
metre
0.40
29.00
Amount
48.00
11.60
3.22
4.25
8.12
1.82
172.69
1.73
174.42
26.16
200.58
30.39
30.40
Amount
95.68
48.00
11.60
90
Code
2204
Description
CARRIAGE:
Poling boards = 0.086 cum
Walling
= 0.048 cum
Bailies struts 3.14/4x(0.1252) x 6.4 = 0.079
cum
Total of carriage = 0.213 cum x = 0.053 cum
LABOUR:
0112
0114
9999
TOTAL
Add for water charge @ 1 %
TOTAL
Add for contractors profit and over-heads @
15%
Cost of 6.6 sqm.
Cost per sqm.
Say
Unit
cum
QuantityRate
0.053
60.81
Day
Day
L.S.
0.06
0.12
2.73
141.60
135.25
1.00
1198
Description
Details of cost for a manhole 1.2x1lmx 1.5m
Surface area 2(1.2+1.0)x1.5 = 6.6 sqm
MATERIALS :
The Material can be used four times on the
same work and after use of material credit is
given @ 75% of cost
Polling boards of 2nd class kail wood planks
250mm wide and 38mm thick :
Unit
QuantityRate
10 cudm 5.375
178.00
10 cudm 3.00
160.00
metre
0.40
29.00
cum
0.053
60.81
Day
0.10
141.60
0302
2204
0112
0114
9999
Beldars
Sundries
Day
L.S.
0.20
3.64
135.25
1.00
Amount
3.22
8.50
16.23
2.73
185.96
1.86
187.82
28.17
215.99
32.73
32.75
95.68
48.00
11.60
3.22
14.16
27.05
3.64
91
Code
Description
TOTAL
Add for water charge @ 1 %
TOTAL
Add for contractors profit and over-heads @
15%
Cost of 6.6 sqm.
Cost per sqm.
Say
Unit QuantityRate
1198
0302
2204
0112
0114
9999
Description
Details of cost for an area 30m long and 1.5m
deep Area = 30 x 1.50 = 45 sqm.
MATERIALS :
The Material can be used four times on the
same work and after use of material credit is
given @ 75% of cost
Polling boards of 2nd class kail wood planks
250mm x 38mm
Unit QuantityRate
10 cu 35.625
178.00
metre 3.75
29.00
cum
0.3275
60.81
Day
Day
L.S.
0.12
0.25
19.76
141.60
135.25
1.00
Description
Details of cost for an area 30m long and 1,5m
deep Area = 30 x 1.5 = 45 sqm.
MATERIALS :
Unit QuantityRate
Amount
203.35
2.03
205.38
30.81
236.19
35.79
35.8
634.12
108.75
19.92
16.99
33.81
19.76
833.35
8.33
841.68
126.25
967.93
21.51
21.50
92
Code
1198
0302
2204
0112
0114
9999
Description
The Material can be used four times on the
same work and after use of material credit is
given @ 75% of cost
Polling boards of 2nd class kail wood planks
250mm x 38mm
Unit
10 cudm 35.625
178.00
metre
3.75
29.00
cum
0.3275
60.81
Day
Day
L.S.
0.25
0.50
33.15
141.60
135.25
1.00
QuantityRate
1198
0302
2204
Description
Details of cost for an area 30m long and 1.5m
deep, Area = 30 x 1.50 = 45 sqm.
MATERIALS :
The Material can be used four times on the
same work and after use of material credit is
given @ 75% of cost
Polling boards of 2nd class kail wood planks
250mm x 38mm
Unit
10 cudm 35.625
178.00
metre
3.75
29.00
cum
0.3275
60.81
QuantityRate
Amount
634.12
108.75
19.92
35.40
67.62
33.15
898.96
8.99
907.95
136.19
1 044.14
23.20
23.20
634.12
108.75
19.92
93
Code
0112
0114
9999
Description
LABOUR:
Carpenter Ilnd class
Beldars
Sundries
TOTAL
Add for water charge @ 1%
TOTAL
Add for contractors profit and over-heads @
15%
Cost of 45 sqm.
Cost per sqm.
Say
Unit
QuantityRate
Day
Day
L.S.
0.50
0.88
47.58
141.60
135.25
1.00
2.23
Code
Description
Unit
10 cudm 997.50
1198
QuantityRate
178.00
1197
160.00
0302
2204
metre
44.63
29.00
cum
1.485
60.81
Amount
70.80
119.02
47.58
1 000.19
10.00
1 010.19
151.53
1 161.72
25.82
25.80
17 755.50
16 800.00
1 294.27
90.30
35940.07
359.40
36 299.47
5 444.92
41 744.39
463.83
463.85
94
2.24 : Extra rates for quantities of works, executed: (The extra perce
cable in respect of each item but limited to quantities of work
difficult conditions).
Description
Extra due to slow progress and
dewatering: 20% of the rate of
the item
Unit
Metre
depth
Code
Description
Unit
Metre
depth
Note for item no. 2.24:quantities of work executed in these difficult conditions. The unit, namely, metre depth, to be considered fo
payment, shall be the depth measured from the sub soil water level up to the centre of gravity of the q
executed in difficult condition. The depth shall be reckoned correct to 0.10m, 0.05m or more shall be taken
0.10m and less than 0.05m ignorel.
0128
0115
0101
Description
Details of cost for 10 cum.
LabourMate
Coolies
Bhishti
TOTAL
Add for water charge @ 1 %
TOTAL
Add for contractors profit and over-heads @
15%
Cost of 10 cum.
Cost of 1 cum.
Say
Unit
Day
Day
Day
works, executed: (The extra percentage rate is applibut limited to quantities of work executed in these
Rate
Amount
Rate
Amount
Rate
Amount
0.20
2.50
0.20
138.45 27.69
135.25 338.12
138.45 27.69
393.50
3.94
397.44
59.62
457.06
45.71
45.70
95
2.26 : Extra for every additional lift of 1.5 m or part thereof in.
2.26.1 All kinds of soil.
Code
Description
Details of cost of 10 cum.
Labour:-
0128
0114
Mate
Beldars
TOTAL
Add for water charge @ 1%
TOTAL
Add for contractors profit and over-heads @
15%
Cost of 10 cum.
Cost of 1 cum.
Say
Unit QuantityRate
Day 0.10
Day 1.1.10
138.45
135.25
2.26 : Extra for every additional lift of 1.5 m or part thereof in.
2.26.2 Ordinary or hard rock.
Code
0128
0114
Description
Details of cost of 10 cum.
Labour:Mate
Beldars
TOTAL
Add for water charge @ 1%
TOTAL
Add for contractors profit and over-heads @
15%
Cost of 10 cum.
Cost of 1 cum.
Say
Unit QuantityRate
Day 0.20
Day 1.95
138.45
135.25
2.27 : Supplying and filling in plinth with Jamuna sand under floors in
ramming consolidating and dressing complete.
Code
6501
2335
0114
0115
0101
Description
Details of cost for 10 cum.
Materials:
Jamuna sand
Carriage of Jamuna sand
Labour:
Beldars
Coolies
Bhishti
TOTAL
Add for water charge @ 1 %
TOTAL
Add for contractors profit and over-heads @
15%
Cost of 10 cum.
Cost of 1 cum.
Say
Unit QuantityRate
cum 10.00
cum 10.60
175.00
53.21
Day 0.89
Day 1.07
Day 0.35
135.25
135.25
138.45
96
Description
Details of cost for 100 sqm.
Labour:
0114
0115
Beldars
Coolies
TOTAL
Add for water charge @ 1 %
TOTAL
Add for contractors profit and over-heads @
15%
Cost of 100 sqm.
Say
Unit QuantityRate
Day 1.97
Day 1.29
135.25
135.25
0114
0101
Description
Details of cost for 100 sqm.
Labour:
Beldars
Bhishti
TOTAL
Add for water charge @ 1 %
TOTAL
Add for contractors profit and over-heads @
15%
Cost of 100 sqm.
Say
Unit QuantityRate
Day 2.75
Day 0.50
135.25
138.45
2.30 : Excavating holes upto 0.5 cum including getting out the excav
returning the soil as required in layers not exceeding 20 cm in
consolidating each deposited layer by ramming, watering etc,
excavated soil; as directed within a lead of 50 m and lift upto
2.30.1 : All kinds of soil.
Code
9999
Description
Details of cost for 6 holesEarth work 6x0.50 = 3.0 cum.
Rate vide item no. 2.8.1
Extra labour for filling and ramming
Sundries
TOTAL
Add for water charges @ 1% on B
TOTAL
Add for contractors profit and over-heads @
15%on (B+C)
Cost of 6 holes
Cost of 1 hole
Say
Unit QuantityRate
cum 3.00
103.40
L.S. 13.52
1.00
97
Excavating holes upto 0.5 cum including getting out the exca
returning the soil as required in layers not exceeding 20 cm i
consolidating each deposited layer by ramming, watering etc
excavated soil; as directed within a lead of 50 m and lift upto
2.30.2 : Ordinary rock
2.30 :
Code
9999
2.3
2.30.3
Code
9999
2.30 :
Description
Details of cost for 6 holesExcavation -6x0.50 = 3.0 cum.
Rate vide item no. 2.9.1
Extra labour for filling and ramming
Sundries
TOTAL
Add for water charges @ 1% on B
TOTAL
Add for contractors profit and over-heads
15% on B+C
Cost of 6 holes
Cost of 1 hole
Say
9999
cum 3.00
162.65
L.S. 7.80
1.00
Excavating holes upto 0.5 cum including getting out the exca
returning the soil as required in layers not exceeding 20 cm i
consolidating each deposited layer by ramming, watering etc
excavated soil; as directed within a lead of 50 m and lift upto
Hard rock (requiring blasting)
Description
Details of cost for 6 holes
6x0.50 = 3.0 cum.
Rate vide item no. 2.9.2
Extra labour for filling and ramming
Sundries
TOTAL
Add for water charges @ 1 % on B
TOTAL
Add for contractors profit and over-heads@
15% on B+C
Cost of 6 holes
Cost of 1 hole
Say
Unit QuantityRate
cum 3.00
272.95
L.S. 80.73
1.00
Excavating holes upto 0.5 cum including getting out the exca
returning the soil as required in layers not exceeding 20 cm i
consolidating each deposited layer by ramming, watering etc
excavated soil; as directed within a lead of 50 m and lift upto
Unit QuantityRate
Description
Details of cost for 6 holesExcavation- 6x0.50 = 3.0cum.
Rate vide item no. 2.9.3
Extra labour for filling and ramming
Sundries
TOTAL
Unit QuantityRate
cum 3.00
332.45
L.S. 80.73
1.00
98
Code
Note :(I)
(II)
Description
Add for water charges @ 1 % on B
TOTAL
Add for contractors profit and over-heads @
15% on B+C
Cost of 6 holes
Cost of 1 hole
Saycum L.S.
Unit QuantityRate
Amount
0.81(C)
1,078.89
12.23
1,091.12
181.85
181.85
Carriage of excavated material beyond the first 50m will be paid under carriage of materials vide subCarriage by animal and mechanical transport will be reckoned in terms of nearest km. distance of 0.5
km or more will be taken as 1 km and distance of less than 0.5 km ignored, However, when the total
lead is less than 0.5 km it will not be ignored but paid for separately in successive stages of 50m
subject to the conditions that the total rate worked out on these bases does not exceed the rate
initial lead of 1km.
Unit QuantityRate
0114
0115
Day 1.08
Day 0.60
Amount
135.25 146.07
135.25 81.15
227.22
2.27
229.49
34.42
263.91
263.90
Unit QuantityRate
0114
0115
9999
Day 0.60
Day 0.25
L.S. 1.82
Amount
135.25 81.15
135.25 33.81
1.00
1.82
116.78
1.17
117.95
17.69
135.64
135.65
Amount
99
0114
0115
9999
Description
Details of cost of tree of 15cm.
in. dia. Ht. = av. 3m
quantity of wood3.14/4x0.15x0.15x3 = 0.053 cum.
Add 20% for branches = 0.011 cum.
Total = 0.064 cum.
Labour for cutting in trees removing
the roots from the soil and then filling
in Pit and depresions.
Beldars
Coolies
Sundries
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of one tree
Say
Unit QuantityRate
Day 0.33
Day 0.17
L.S. 2.73
135.25
135.25
1.00
0114
0115
9999
Description
Details of cost of a treeof av. girth = 90cm
of av. dia. = 0.3m
and length = 5m
(22x0.3x0.3x5)/7x4 = 0.35 cum
20% branches = 0.07 cum
Total = 0.42 cum
Labour for cutting the trees and
removing in roots from the soil
filling in pit and the depresions
Beldars
Coolies
Sundries
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of one tree
Say
Unit QuantityRate
Day 1.50
Day 0.75
L.S. 5.46
135.25
135.25
1.00
60 cm girth
Amount
44.63
22.99
2.73
70.35
0.70
71.05
10.66
81.71
81.70
120 cm girth
Amount
202.88
101.44
5.46
309.78
3.10
312.88
46.93
359.81
359.80
100
0114
0115
9999
Description
Unit
QuantityRate
Day
Day
L.S.
7.00
3.50
8.06
135.25
135.25
1.00
Code
0114
0115
9999
Description
Details of cost for a tree of average 300cm.
girth and length 10m
3.142/4x1x1x10 = 7.86 cum
20% Branches = 1.57 cum.
Total = 9.43 cum.
Labour for cutting the trees and
removing in roots from the soil
filling in pit and the depresions.
Beldars
Coolies
Sundries
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of one tree
Say
Unit
QuantityRate
Day
Day
L.S.
14.00
7.00
26.91
135.25
135.25
1.00
Description
Details of cost of 100 litres
Chlorpyriphos E.C. 20%
Carriage of chemical
TOTAL
Unit
QuantityRate
litre
100.00
quintal 1.00
150.00
5.32
240 cm girth
Amount
946.75
473.38
8.06
1 428.19
14.28
1 442.47
216.37
1 658.84
1 658.85
Amount
1893.50
946.75
26.91
2 867.16
28.67
2 895.83
434.37
3 330.20
3 330.20
15 000.00
5.32
15 005.32
101
Code
Description
Add 1% for water charges
TOTAL
Add for contractors profit and overheads @
15%
Cost for 100 litres
Cost for 1 litre
Say
Unit
2.35.1 : Along external wall where the apron is not provided using ch
7.5 litres / sqm of the vertical surface of the substructure to a
including excavation channel along the wall & rodding etc. com
7022
0114
9999
Description
Details of cost for 10 metres
Materials:
Chlorpyriphos 1% concentration =
10.0x0.30x7.5 = 22.5 litres
Chlorpyriphos 20% E.C. required 22.5/20 =
1.125 litres.
Labour
Beldars (for excavating channel ) rodding
in chemical spraying the emulssion and
refilling the same
Sundries and rent of sprayer etc
TOTAL
Add 1 % for water charges
TOTAL
Add for contractors profit and overheads @
15%
Cost for 10 metres
Cost for 1 metre
Say
Unit
litre
Day
L.S.
2.35.2 : Along the external wall below concrete or masonry apron usi
@ 2.25 litres per linear metre including drilling and plugging h
7022
0114
Description
Details of cost for 10 metres
Materials:
Chlorpyriphos 1% concentration = 10x2.25 =
22.5 litres
Chlorpyriphos 20% required = 22.5/20 =
1.125 litres
Labour:
Beldar (for drilling holes and injecting
chemical)
Unit
litre
Day
Quantity
Rate
Amount
150.05
15 155.37
2 273.31
17 428.68
174.29
174.30
0% with 1% concentration.
Quantity
Rate
Amount
1.125
to be
supplied
free of cost
0.00
0.33
13.52
135.25
1.00
44.63
13.52
58.15
0.58
58.73
8.81
67.54
6.75
6.75
0% with 1% concentration.
Quantity
Rate
Amount
1.125
to be
supplied
free of cost
0.00
0.40
135.25
54.10
102
Code
9999
Description
Sundries and rent of a sprayer and mortar and
making good the holes
TOTAL
Add 1 % for water charges
TOTAL
Add for contractors profit and overheads @
15%
Cost for 10 metres
Cost for 1 metre
Say
Unit QuantityRate
L.S. 35.88
1.00
2.35:
7022
0114
0124
9999
Description
Unit QuantityRate
litre 5.00
to be
supplied
free of cost
Day 2.00
Day 0.50
L.S. 35.88
135.25
141.60
1.00
Labour:
(For making holes & spraying)
Beldars
Mason Ilnd class
Sundries, rent of sprayer and mortar
TOTAL
Add 1 % for water charges
TOTAL
Add for contractors profit and overheads @
15%
Cost for 9 square metre
Cost per square metre
Say
Description
Details of cost for 10 metres
Materials:
No. of holes 10.0/0.30 = 33.33+1 = 34.33
holes
Say 34 holes
Unit QuantityRate
Amount
35.88
89.98
0.90
90.88
13.63
104.51
10.45
10.45
POST-CONSTRUCTIONAL anti-termite
mulsion):
h 1% concentration.
Amount
0.00
270.50
70.80
35.88
377.18
3.77
380.95
57.14
438.09
48.68
48.70
POST-CONSTRUCTIONAL anti-termite
mulsion):
###
Code
7022
0114
0124
9999
Description
chlorpyriphos 1% concentration required
= 34x1.0 = 34.00 litres
Chlorpyriphos 20% E.C. required
34.00/20= 1.70 litres
Chlorpyriphos 20% concentrates
Labour:
Beldar (for making holes at 45 deg and
spraying the emulsion)
Mason Ilnd class
Sundries, rent of pump etc.
TOTAL
Add 1% for water charges
TOTAL
Add for contractors profit and overheads @
Cost for 10 metres
Cost for 1 metre
Say
Unit QuantityRate
litre 1.70
to be
supplied
free of cost
Day 0.30
135.25
Day 0.05
L.S. 17.94
141.60
1.00
0771
0112
0114
9999
Description
Details of cost for 10 metres
Materials:
No. of holes 10.0/0.15 = 66.67+1 = 67.67
holes
Say 68 holes
Chlordane 1% concentration required
= 68 x 0.5 = 34.00 litres
Chlordane 20% E.C. required
34.00/20=1.70 litres
Chlordane 20% E.C. required = 34/20 = 1.7
Kerosene oil = 34-1.7 = 32.30 litres
Labour:
Carpenter 2nd class (For making holes and
plugging the same)
Beldar for injecting chemical
Sundries
TOTAL
Add 1% for water charges
TOTAL
Add for contractors profit and overheads @
15%
Cost for 10 metres
Cost for 1 metre
Say
Unit QuantityRate
litre 1.70
to be
supplied
free of cost
litre 32.30
19.00
Day 0.20
141.60
Day 0.20
L.S. 17.94
135.25
1.00
Amount
0.00
40.57
7.08
17.94
65.59
0.66
66.25
9.94
76.19
7.62
7.60
POST-CONSTRUCTIONAL anti-termite
mulsion):
k by chemical emulsion Chlorpyriphos/
@ 0.5 litres per hole by drilling 6 mm
at 150 mm centre to centre and sealing
Amount
0.00
613.70
28.32
27.05
17.94
687.01
6.87
693.88
104.08
797.96
79.80
79.80
104
2.36 : Deduct for disposed soil not levelled and neatly dressed (again
Code
0128
0115
Description
Details of cost for 10 cum.
LabourMate
Beldar/Coolies
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 10 cum.
Cost of 1 cum.
Say
Unit QuantityRate
Day 0.08
Day 0.80
138.45
135.25
105
MORTARS
107
3.1
Code
Discription
Details of cost for 1 cum
MATERIALS
(0.7175 cum. of cement = 1.02 tonne)
Cement
Carriage of Cement
Fine sand
Carriage of Fine sand
LABOUR
For measuring, carrying, depositing and
mixingBeldar
Bhisti
Hire and running charges of mechanical mixer
Sundries
Cost of 1.00 cum
Say
0367
2209
0983
2261
0114
0101
9999
9999
Notes:-
3.2
tonne
tonne
cum
cum
Day
Day
L.S.
L.S.
Code
0367
2209
0983
2261
0114
0101
9999
9999
Note:-
Unit
Unit
tonne
tonne
cum
cum
Day
Day
L.S.
L.S.
ne sand)
Quantity
Rate
Amount
1.02
1.02
0.7125
0.7125
4 500.00
47.29
320
53.21
4 590.00
48.24
228
37.91
0.75
0.07
26.9
13.52
135.25
138.45
1.00
1.00
101.44
9.69
26.91
13.52
5 055.71
5 055.70
Quantity
Rate
Amount
0.68
0.68
0.95
0.95
4 500.00
47.29
320.00
53.21
3 060.00
32.16
304.00
50.55
0.75
0.07
26.91
13.52
135.25
138.45
1.00
1.00
101.44
9.69
26.91
13.52
3 598.27
3 598.25
ne sand)
108
3.3
Code
Discription
Details of cost for 1 cum
MATERIALS
(0.375 cum. of cement = 0.51 tonne)
Cement
Carriage of Cement
Fine sand
Carriage of fine sand
LABOUR
For measuring, carrying, depositing and
mixingBeldar
Bhisti
Hire and running charges of mechanical mixer
Sundries
Cost of 1.00 cum
Say
0367
2209
0983
2261
0114
0101
9999
9999
Note:-
Unit QuantityRate
tonne
tonne
cum
cum
0.51
0.51
1.07
1.07
4 500.00
47.29
320.00
53.21
Day
Day
L.S.
L.S.
0.75
0.07
26.91
13.52
135.25
138.45
1.00
1.00
3.4
Code
Discription
Details of cost for 1 cum
MATERIALS
(0.268 cum. of cement = 0.38 tonne)
Cement
Carriage of Cement
Fine sand
Carriage of fine sand
LABOUR
For measuring, carrying, depositing and
mixingBeldar
Bhisti
Hire and running charges of mechanical mixer
Sundries
Cost of 1.00 cum
Say
0367
2209
0983
2261
0114
0101
9999
9999
Note:-
Unit QuantityRate
tonne
tonne
cum
cum
0.38
0.38
1.07
1.07
4 500.00
47.29
320.00
53.21
Day
Day
L.S.
L.S.
0.75
0.07
26.91
13.52
135.25
138.45
1.00
1.00
Amount
2295.00
24.12
342.40
56.93
101.44
9.69
26.91
13.52
2870.01
2870.00
Amount
1710.00
17.97
342.40
56.93
101.44
9.69
26.91
13.52
2278.86
2278.85
109
3.5
Code
Discription
Details of cost for 1 cum
MATERIALS
(0.214 cum. of cement = 0.31 tonne)
Cement
Carriage of Cement
Fine sand
Carriage of fine sand
LABOUR
For measuring, carrying, depositing and
mixingBeldar
Bhisti
Hire and running charges of mechanical mixer
Sundries
Cost of 1.00 cum
Say
0367
2209
0983
2261
0114
0101
9999
9999
Note:-
Unit QuantityRate
tonne
tonne
cum
cum
0.31
0.31
1.07
1.07
4 500.00
47.29
320.00
53.21
Day
Day
L.S.
L.S.
0.75
0.07
26.91
13.52
135.25
138.45
1.00
1.00
3.6
Code
Discription
Details of cost for 1 cum
MATERIALS
(0.178 cum. of cement = 0.25 tonne)
Cement
Carriage of Cement
Fine sand
Carriage of fine sand
LABOUR
For measuring, carrying, depositing and
mixingBeldar
Bhisti
Hire and running charges of mechanical mixer
Sundries
Cost of 1.00 cum
Say
0367
2209
0983
2261
0114
0101
9999
9999
Note:-
Unit QuantityRate
tonne
tonne
cum
cum
0.25
0.25
1.07
1.07
4 500.00
47.29
320.00
53.21
Day
Day
L.S.
L.S.
0.75
0.07
26.91
13.52
135.25
138.45
1.00
1.00
Amount
1395.00
14.66
342.40
56.93
101.44
9.69
26.91
13.52
1960.55
1960.55
Amount
1125.00
11.82
342.40
56.93
101.44
9.69
26.91
13.52
1687.71
1687.70
110
3.7
Code
Discription
Details of cost for 1 cum
MATERIALS
(0.476 cum. of cement = 0.68 tonne)
Cement
Carriage of Cement
Coarse sand
Carriage of Coarse sand
LABOUR
For measuring, carrying, depositing and
mixingBeldar
Bhisti
Hire and running charges of mechanical mixer
Sundries
Cost of 1.00 cum
Say
0367
2209
0982
2203
0114
0101
9999
9999
Note:-
Unit QuantityRate
tonne
tonne
cum
cum
0.68
0.68
1.95
1.95
4 500.00
47.29
600.00
53.21
Day
Day
L.S.
L.S.
0.75
0.07
26.91
13.52
135.25
138.45
1.00
1.00
3.8
Code
Discription
Details of cost for 1 cum
MATERIALS
(0.357 cum. of cement = 0.51 tonne)
Cement
Carriage of Cement
Coarse sand
Carriage of Coarse sand
LABOUR
For measuring, carrying, depositing and
mixingBeldar
Bhisti
Hire and running charges of mechanical mixer
Sundries
Cost of 1.00 cum
Say
0367
2209
0982
2203
0114
0101
9999
9999
Note:-
Unit QuantityRate
tonne
tonne
cum
cum
0.51
0.51
1.07
1.07
4 500.00
47.29
600.00
53.21
Day
Day
L.S.
L.S.
0.75
0.07
26.91
13.52
135.25
138.45
1.00
1.00
Amount
3060.00
32.16
570.00
50.55
101.44
9.69
26.91
13.52
3864.27
3864.25
Amount
2295.00
24.12
642.00
56.93
101.44
9.69
26.91
13.52
3169.61
3169.60
111
3.9
Code
Discription
Details of cost for 1 cum
MATERIALS
(0.214 cum. of cement = 0.31 tonne)
Cement
Carriage of Cement
Coarse sand
Carriage of Coarse sand
LABOUR
For measuring, carrying, depositing and
mixingBeldar
Bhisti
Hire and running charges of mechanical mixer
Sundries
Cost of 1.00 cum
Say
0367
2209
0982
2203
0114
0101
9999
9999
Note:-
Unit QuantityRate
0.38
tonne
0.38
tonne
1.07
cum
1.07
cum
Day
Day
L.S.
L.S.
0.75
0.07
26.91
13.52
4 500.00
47.29
600.00
53.21
135.25
138.45
1.00
1.00
3.1
Code
Discription
Details of cost for 1 cum
MATERIALS
(0.214cum. of cement = 0.31 tonne)
Cement
Carriage of Cement
Coarse sand
Carriage of Coarse sand
LABOUR
For measuring, carrying, depositing and
mixingBeldar
Bhisti
Hire and running charges of mechanical mixer
Sundries
Cost of 1.00 cum
Say
0367
2209
0982
2203
0114
0101
9999
9999
Note:-
Unit QuantityRate
0.31
tonne
0.31
tonne
1.07
cum
1.07
cum
Day
Day
L.S.
L.S.
0.75
0.07
26.91
13.52
4 500.00
47.29
600.00
53.21
135.25
138.45
1.00
1.00
Amount
1710.00
17.97
642.00
56.93
101.44
9.69
26.91
13.52
2578.46
2578.45
Amount
1395.00
14.66
642.00
56.93
101.44
9.69
26.91
13.52
2260.15
2260.15
112
3.11
Code
Discription
Details of cost for 1 cum
MATERIALS
(0.178 cum. of cement = 0.25 tonne)
Cement
Carriage of Cement
Coarse sand
Carriage of Coarse sand
LABOUR
For measuring, carrying, depositing and
mixingBeldar
Bhisti
Hire and running charges of mechanical mixer
Sundries
Cost of 1.00 cum
Say
0367
2209
0982
2203
0114
0101
9999
9999
Note:-
Unit QuantityRate
tonne
tonne
cum
cum
0.25
0.25
1.07
1.07
4 500.00
47.29
600.00
53.21
Day
Day
L.S.
L.S.
0.75
0.07
26.91
13.52
135.25
138.45
1.00
1.00
3.12
Code
Discription
Details of cost for 1 cum
MATERIALS
(0.475 cum. of cement = 0.68 tonne)
Cement
Carriage of Cement
Stone dust
Carriage of stone dust
LABOUR
For measuring, carrying, depositing and
mixingBeldar
Bhisti
Hire and running charges of mechanical mixer
Sundries
Cost of 1.00 cum
Say
0367
2209
1159
2267
0114
0101
9999
9999
Note:-
Unit QuantityRate
tonne
tonne
cum
cum
0.68
0.68
0.95
0.95
4 500.00
47.29
700.00
53.21
Day
Day
L.S.
L.S.
0.75
0.07
26.91
13.52
135.25
138.45
1.00
1.00
Amount
1125.00
11.82
642.00
56.93
101.44
9.69
26.91
13.52
1987.31
1987.30
Amount
3060.00
32.16
665.00
50.55
101.44
9.69
26.91
13.52
3959.27
3959.25
113
3.13
Code
Discription
Details of cost for 1 cum
MATERIALS
(0.475 cum. of cement = 0.68 tonne)
Cement
Carriage of Cement
Marble dust
Carriage of Marble dust
LABOUR
For measuring, carrying, depositing and
mixingBeldar
Bhisti
Hire and running charges of mechanical mixer
Sundries
Cost of 1.00 cum
Say
0367
2209
0784
2268
0114
0101
9999
9999
Note:-
Unit QuantityRate
tonne
tonne
cum
cum
0.68
0.68
0.95
0.95
4 500.00
47.29
800.00
53.21
Day
Day
L.S.
L.S.
0.75
0.07
26.91
13.52
135.25
138.45
1.00
1.00
3.14
Code
Discription
Details of cost for 1 cum
MATERIALS
(0.214 cum. of cement = 0.31 tonne)
Cement
Carriage of Cement
Marble dust
Carriage of Marble dust
LABOUR
For measuring, carrying, depositing and
mixingBeldar
Bhisti
Hire and running charges of mechanical mixer
Sundries
Cost of 1.00 cum
Say
0367
2209
0784
2268
0114
0101
9999
9999
Note:-
Unit QuantityRate
tonne
tonne
cum
cum
0.31
0.31
1.07
1.07
4 500.00
47.29
800.00
53.21
Day
Day
L.S.
L.S.
0.75
0.07
26.91
13.52
135.25
138.45
1.00
1.00
Amount
3060.00
32.16
760.00
50.55
101.44
9.69
26.91
13.52
4054.27
4054.25
Amount
1395.00
14.66
856.00
56.93
101.44
9.69
26.91
13.52
2474.15
2474.15
114
3.15
Code
Discription
Details of cost for 1 cum
MATERIALS
(0.475 cum. of white cement = 0.68 tonne)
White Cement
Carriage of White Cement
Marble dust
Carriage of Marble dust
LABOUR
For measuring, carrying, depositing and
mixingBeldar
Bhisti
Hire and running charges of mechanical mixer
Sundries
Cost of 1.00 cum
Say
0368
2209
0784
2268
0114
0101
9999
9999
Note:-
Unit QuantityRate
tonne
tonne
cum
cum
0.68
0.68
0.95
0.95
9700.00
47.29
800.00
53.21
Day
Day
L..S
L..S
0.75
0.07
26.91
13.52
135.25
138.45
1.00
1.00
3.16
Code
Discription
Details of cost for 1 cum
MATERIALS
(0.357 cum. of white cement = 0.51 tonne)
White Cement
Carriage of White Cement
Marble dust
Carriage of Marble dust
LABOUR
For measuring, carrying, depositing and
mixingBeldar
Bhisti
Hire and running charges of mechanical mixer
Sundries
Cost of 1.00 cum
Say
0368
2209
0784
2268
0114
0101
9999
9999
Note:-
Unit QuantityRate
tonne
tonne
cum
cum
Day
Day
L.S.
L.S.
0.51
0.51
1.07
1.07
0.75
0.07
26.91
13.52
9700.00
47.29
800.00
53.21
135.25
138.45
1.00
1.00
t : 2 marble dust)
Amount
6596.00
32.16
760.00
50.55
101.44
9.69
26.91
13.52
7590.27
7590.25
: 3 marble dust)
Amount
4747.00
24.12
856.00
56.93
101.44
9.69
26.91
13.52
6035.61
6035.60
115
3.17
Code
Discription
Details of cost for 1 cum
MATERIALS
(0.214 cum. of white cement = 0.31 tonne)
White Cement
Carriage of White Cement
Marble dust
Carriage of Marble dust
LABOUR
For measuring, carrying, depositing and
mixingBeldar
Bhisti
Hire and running charges of mechanical mixer
Sundries
Cost of 1.00 cum
Say
0368
2209
0784
2268
0114
0101
9999
9999
Note:-
Mud mortar
Code
Discription
0114
0101
9999
tonne
tonne
cum
cum
0.31
0.31
1.07
1.07
9700.00
47.29
800.00
53.21
Day
Day
L.S.
L.S.
0.75
0.07
26.91
13.52
135.25
138.45
1.00
1.00
3.18
0811
Unit QuantityRate
Unit QuantityRate
cum
1.08
20.00
Day
Day
L.S.
0.63
0.32
6.45
135.25
138.45
1.00
t : 5 marble dust)
Amount
3007.00
14.66
856.00
56.93
101.44
9.69
26.91
13.52
4086.15
4086.15
Amount
21.60
85.21
43.61
6.45
156.87
156.87
156.85
SUB HEAD :
CONCRETE WO
117
UB HEAD : 4.0
RETE WORK
119
4.1.1
Code
Discription
4.1
0295
0297
2202
0982
2203
0367
2209
0155
0114
0101
0002
0012
9999
Unit
Quantity
cum
cum
cum
cum
cum
tonne
tunne
0.64
0.21
0.85
0.43
0.43
0.61
0.61
Day
Day
Day
Day
Day
L.S
0.10
1.63
0.70
0.07
0.07
14.30
4.1
4.1.2
Code
0295
0297
2202
0982
2203
0367
2209
0155
0144
0101
0002
0012
9999
Discription
Details of cost for 1 cum.
Materials :
Stone aggregate 20mm
Stone aggregate 10mm
Carriage of aggregate
Coarse sand
Carriage of coarse sand
Cement (0.2833 cum)
Carriage of cement
Labour:
Mason
Beldar
Bhishti
Mixer
Vibrator
Sundries
TOTAL
Add 1 % for water charges
TOTAL,
15 % for contractors profit and
overheads Cost of 1 cum.
Say
Unit
Quantity
cum
cum
cum
cum
cum
tonne
tonne
0.57
0.28
0.85
0.43
0.43
0.40
0.40
Day
Day
Day
Day
Day
L.S.
0.10
1.63
0.70
0.07
0.07
14.30
Amount
700.00
700.00
53.21
600.00
53.21
4500.00
47.29
448.00
147.00
45.23
255.00
22.61
2745.00
28.85
146.55
135.25
138.45
400.00
200.00
1.00
14.66
220.46
96.92
28.00
14.00
14.30
4080.03
40.80
4120.83
618.12
4738.95
4738.95
Amount
700.00
700.00
53.21
600.00
53.21
4500.00
47.29
399.00
196.00
45.23
255.00
22.61
1800.00
18.92
146.55
135.25
138.45
400.00
200.00
1.00
14.66
220.46
96.92
28.00
14.00
14.30
3125.10
31.25
3156.35
473.45
3629.80
3629.80
120
4.1.3
Code
Discription
4.1
0295
0297
2202
0982
2203
0367
2209
0155
0114
0101
0002
0012
9999
4.1
4.1.4
Code
0293
0295
0297
2206
2202
0982
2203
0367
2209
0155
0114
0101
0002
0012
9999
Unit
Quantity
cum
cum
cum
cum
cum
tonne
tonne
0.67
0.22
0.89
0.445
0.445
0.32
0.32
Day
Day
Day
Day
Day
L.S
0.10
1.63
0.70
0.07
0.07
14.30
Unit
Quantity
cum
0.52
cum
cum
cum
cum
cum
cum
tonne
tonne
0.22
0.11
0.52
0.33
0.445
0.445
0.32
0.32
Day
Day
Day
Day
Day
L.S.
0.10
1.63
0.70
0.07
0.07
13.52
Cost of 1 cum.
Say
Amount
700.00
700.00
53.21
600.00
53.21
4500.00
47.29
469.00
154.00
47.36
267.00
23.68
1440.00
15.13
146.55
135.25
138.45
400.00
200.00
1.00
14.66
220.46
96.92
28.00
14.00
14.30
2804.54
28.05
2832.56
424.88
3257.44
3257.45
Amount
650.00
338.00
700.00
700.00
57.83
53.21
600.00
53.21
4500.00
47.29
154.00
77.00
30.07
17.56
267.00
23.68
1440.00
15.13
146.55
135.55
138.45
400.00
200.00
1.00
14.66
220.46
96.92
28.00
14.00
13.52
2750.00
27.50
2777.50
416.62
3194.12
3194.10
121
4.1
4.1.5
Code
0295
0297
2202
0982
2203
0367
2209
0155
0114
0101
0002
0012
9999
4.1
4.1.6
Code
0293
0295
2206
2202
0982
2203
0367
2209
0155
0114
0101
0002
0012
9999
Unit QuantityRate
cum
cum
cum
cum
cum
tonne
tonne
0.70
0.24
0.94
0.47
0.47
0.22
0.22
700.00
700.00
53.21
600.00
53.21
4500.00
47.29
Day
Day
Day
Day
Day
L.S.
0.10
1.63
0.70
0.07
0.07
13.52
146.55
135.25
138.45
400.00
200.00
2.60
Unit QuantityRate
cum
0.65
650.00
cum
cum
cum
cum
cum
tonne
tonne
0.24
0.65
0.24
0.47
0.47
0.22
0.22
700.00
57.83
53.21
600.00
53.21
4500.00
47.29
Day
Day
Day
Day
Day
L.S.
0.10
1.63
0.70
0.07
0.07
13.52
146.55
135.25
138.45
400.00
200.00
1.00
490.00
168.00
50.02
282.00
25.01
990.00
10.40
14.66
220.46
96.92
28.00
14.00
13.52
2402.99
24.03
2427.02
364.05
2791.07
2791.05
122
4.1
4.1.7
Code
0293
0295
2206
2202
0982
2261
0367
2209
0155
0114
0101
0002
0012
9999
4.1
4.1.8
Code
0293
0295
2206
2202
0982
2261
0367
2209
0155
0114
0101
0002
0012
9999
Unit QuantityRate
cum
0.65
650.00
cum
cum
cum
cum
cum
tonne
tonne
0.24
0.65
0.24
0.47
0.47
0.22
0.22
700.00
57.83
53.21
320.00
53.21
4500.00
47.29
Day
Day
Day
Day
Day
L.S.
0.10
1.63
0.70
0.07
0.07
13.52
146.55
135.25
138.45
400.00
200.00
1.00
Unit QuantityRate
cum
0.65
650.00
cum
cum
cum
cum
cum
tonne
tonne
0.24
0.65
0.24
0.47
0.47
0.17
0.17
700.00
57.83
53.21
600.00
53.21
4500.00
47.29
Day
Day
Day
Day
Day
L.S.
0.10
1.63
0.70
0.07
0.07
13.52
146.55
135.25
138.45
400.00
200.00
1.00
Cost of 1 cum.
Say
2448.98
2449.00
123
Code
0293
0295
2206
2202
0983
2261
0367
2209
0155
0114
0101
0002
0012
9999
4.1
Discription
Unit QuantityRate
cum
0.65
650.00
cum
cum
cum
cum
cum
tonne
tonne
0.24
0.65
0.24
0.47
0.47
0.17
0.17
700.00
57.83
53.21
320.00
53.21
4500.00
47.29
Day
Day
Day
Day
Day
L.S.
0.10
0.63
0.70
0.07
0.07
13.52
146.55
135.25
138.45
400.00
200.00
1.00
0293
0295
2206
2202
0982
2203
0367
2209
0155
0114
0101
0002
0012
9999
Discription
Details of cost for 1 cum.
Materials :
Stone aggregate 40mm (one size) (0.70
cum-7.5% for voids i.e. 0.05 = 0.65 cum
Stone aggregate 20 mm (One size)
Carriage of aggregate 40mm
Carriage of aggregate 20mm
Coarse sand
Carriage of coarse sand
Cement (0.2225 cum)
Carriage of cement
Labour:
Mason
Beldar
Bhishti
Mixer
Vibrator
Sundries
TOTAL
Add 1% for water charges
TOTAL
Unit QuantityRate
cum
0.65
650.00
cum
cum
cum
cum
cum
tonne
tonne
0.24
0.65
0.24
0.47
0.47
0.13
0.13
700.00
57.83
53.21
320.00
53.21
4500.00
47.29
Day
Day
Day
Day
Day
L.S.
0.10
1.63
0.70
0.07
0.07
13.52
146.55
135.25
138.45
400.00
200.00
1.00
422.50
168.00
37.59
12.77
150.40
25.01
765.00
8.04
14.66
220.46
96.92
28.00
14.00
13.52
1976.87
19.77
1996.64
299.50
2296.14
2296.15
291.88
2237.73
2237.75
124
4.1
0293
0295
2206
2202
0983
2261
0367
2209
0155
0114
0101
0002
0012
9999
4.1
Discription
Unit
QuantityRate
cum
0.65
650.00
cum
cum
cum
cum
cum
tonne
tonne
0.24
0.65
0.24
0.47
0.47
0.13
0.13
700.00
57.83
53.21
320.00
53.21
4500.00
47.29
Day
Day
Day
Day
Day
L.S.
0.10
1.63
0.70
0.07
0.07
8.97
146.55
135.25
138.45
400.00
200.00
1.00
0293
0295
2206
2202
0982
2203
1980
2262
0367
2209
0155
0114
0101
0002
0012
9999
Discription
Details of cos tfor 1 cum.
Materials:
Stone aggregate 40mm (one size) (0.70
cum-7.5% for voids i.e. 0.05-0.65 cum)
Stone aggregate 20 mm (one size)
Carriage of aggregate 40 mm
Carriage of agregate 20 mm
Coarse sand
Carriage of coarse sand
Fly ash
Carriage of fly ash
Cement
Carriage of cement
LABOUR;
Mason
Beldar
Bhishti
Mixer
Vibrator
Sundries
Unit
QuantityRate
cum
0.65
650.00
cum
cum
cum
cum
cum
cum
cum
tonne
tonne
0.24
0.65
0.24
0.37
0.37
0.21
0.21
0.17
0.17
700.00
57.83
53.21
600.00
53.21
6.00
53.21
4500.00
47.29
Day
Day
Day
Day
Day
L.S.
0.10
1.63
0.70
0.07
14.30
1.00
146.55
135.25
138.45
400.00
200.00
14.30
422.50
168.00
37.59
12.77
150.40
25.01
585.00
6.15
14.66
220.46
96.92
28.00
14.00
8.97
1790.43
17.90
1808.33
271.25
2079.58
2079.60
125
Code
Discription
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profits and overheads
Cost of 1 cum.
Say
Unit QuantityRate
4.1
4.1.13 1:2 1/2:4:11( 1 Ordinary Portland cement : 2 1/2 Fly ash : 4 coars
stone aggregate 40 mm nominal
Code
0293
0295
2206
2202
0982
2203
1980
2262
0367
2209
0155
0114
0101
0002
0012
9999
Discription
Details of cost for 1 cum.
Materials :
Stone aggregate 40mm (one size) (0.70
cum-7.5% for voids i.e. 0.05 - 0.65 cum)
Stone aggregate 20 mm (one size)
Carriage of aggregate 40mm
Carriage of aggregate 20mm
Coarse sand
Carriage of coarse sand
Fly ash
Carriage of fly ash
Cement
Carriage of cement
LABOUR:
Mason
Beldar
Bhishti
Mixer
Vibrator
Sundries
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 1 cum.
Say
Unit QuantityRate
cum
0.65
650.00
cum
cum
cum
cum
cum
cum
cum
tonne
tonne
0.24
0.65
0.24
0.34
0.34
0.21
0.21
0.13
0.13
700.00
57.83
53.21
600.00
53.21
6.00
53.21
4500.00
47.29
Day
Day
Day
Day
Day
L.S.
0.10
1.63
0.70
0.07
0.07
14.30
146.55
135.25
138.45
400.00
200.00
2.60
Amount
2056.30
20.56
2076.92
311.54
2388.46
2388.45
126
Code Discription
0295
0297
2202
0982
2203
0367
2209
0114
0115
0101
0123
0124
0002
0012
9999
9999
0115
4.2
Unit QuantityRate
Amount
cum
cum
cum
cum
cum
tonne
tonne
0.64
0.21
0.85
0.425
0.425
0.61
0.61
700.00
700.00
53.21
700.00
53.21
4500.00
47.29
448.00
147.00
45.23
255.00
22.61
2745.00
28.85
Day
Day
Day
Day
Day
Day
Day
L.S.
L.S.
Day
0.90
0.78
0.70
0.06
0.06
0.07
0.07
114.40
14.30
1.13
135.25
135.25
138.45
151.50
141.60
400.00
200.00
1.00
1.00
135.25
121.72
105.50
96.92
9.09
8.50
28.00
14.00
114.40
14.30
152.83
4356.95
43.57
4400.52
660.08
5060.60
5060.60
Code Discription
Details of cost for 1 cum.
Materials:
20mm stone aggregate
0295
Stone aggregate 10mm
0297
Carriage of aggregate
2202
Coarse sand
0982
Carriage of coarse sand
2203
Cement (0.2833 cum)
0367
Carriage of cement
2209
Labour:
Beldar
0114
Unit QuantityRate
Amount
cum
cum
cum
cum
cum
tonne
tonne
0.57
0.28
0.85
0.425
0.425
0.40
0.40
700.00
700.00
53.21
600.00
53.21
4500.00
47.29
399.00
196.00
45.23
255.00
22.61
1800.00
18.92
Day
0.90
135.25
121.72
127
Code
0115
0101
0123
0124
0002
0012
9999
9999
0115
Discription
Coolie
Bhishti
Mason 1st class
Mason Ilnd class
Mixer
Vibrator
Scaffolding
Sundries
(Extra labour for lifting.material upto floor
level) Coolie (0.75x1.50)
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 1 cum.
Say
4.2
4.2.3
Code
0295
0297
2202
0982
2203
0367
2209
0114
0115
0101
0123
0124
0002
0012
9999
9999
0115
Unit
Day
Day
Day
Day
Day
Day
L.S.
L.S.
Day
QuantityRate
0.78
135.25
0.70
138.45
0.06
151.50
0.06
141.60
0.07
400.00
0.07
200.00
114.40
1.00
14.30
1.00
1.13
135.25
Discription
Details of cost for 1 cum.
Materials:
Stone aggregate 20 mm
Stone aggregate 10 mm
Carriage of aggregate
Coarse sand
Carriage of coarse sand
Cement (0.2833 cum)
Carriage of cement
Labour:
Beldar
Coolie
Bhishti
Mason 1st class
Mason Ilnd class
Unit QuantityRate
cum
cum
cum
cum
cum
tonne
tonne
0.67
0.22
0.89
0.45
0.45
0.32
0.32
700.00
700.00
53.21
600.00
53.21
4500.00
47.29
Day
Day
Day
Day
Day
0.90
0.78
0.70
0.06
0.06
135.25
135.25
138.45
151.50
141.60
Mixer
Vibrator
Day
Day
0.07
0.07
400.00
200.00
Scaffolding
Sundries
L.S.
L.S.
114.40
14.30
1.00
1.00
Day
1.13
135.25
Amount
105.50
96.92
9.09
8.50
28.00
14.00
114.40
14.30
152.83
3402.02
34.02
3436.04
515.41
3951.45
3951.45
128
4.2
4.2.4
Code
0293
0295
0297
2206
2202
0982
2203
0367
2209
0114
0115
0101
0123
0124
0002
0012
9999
9999
0115
Unit QuantityRate
cum
0.52
650.00
cum
cum
cum
cum
cum
cum
tonne
tonne
0.22
0.11
0.52
0.33
0.45
0.45
0.32
0.32
700.00
700.00
57.83
53.21
600.00
53.21
4500.00
47.29
Day
Day
Day
Day
Day
Day
Day
L.S.
L.S.
Day
0.90
0.78
0.70
0.06
0.06
0.07
0.07
114.40
13.52
1.13
135.25
135.25
138.45
151.50
141.60
400.00
200.00
1.00
1.00
135.25
338.00
154.00
77.00
30.07
17.56
267.00
23.68
1440.00
15.13
121.72
105.50
96.92
9.09
8.50
28.00
14.00
114.40
13.52
152.83
3026.92
30.27
3057.19
458.58
3515.77
3515.75
129
4.2
4.2.5
Code
0295
0297
2202
0982
2203
0367
2209
0114
0115
0101
0123
0124
0002
0012
9999
9999
0115
4.2
4.2.6
Code
0293
0295
2206
2202
0982
2203
0367
2209
Unit QuantityRate
cum
cum
cum
cum
cum
tonne
tonne
0.70
0.24
0.94
0.47
0.47
0.22
0.22
700.00
700.00
53.21
600.00
53.21
4500.00
47.29
Day
Day
Day
Day
Day
Day
Day
L.S.
L.S.
Day
0.90
0.78
0.70
0.06
0.06
0.07
0.07
114.40
13.52
1.13
135.25
135.25
138.45
151.50
141.60
400.00
200.00
1.00
1.00
135.25
Unit QuantityRate
cum
0.65
650.00
cum
cum
cum
cum
cum
tonne
tonne
0.24
0.65
0.24
0.47
0.47
0.22
0.22
700.00
57.83
53.21
600.00
53.21
4500.00
47.29
490.00
168.00
50.02
282.00
25.01
990.00
10.40
121.72
105.50
96.92
9.09
8.50
28.00
14.00
114.40
13.52
152.83
2679.91
26.80
2706.71
406.01
3112.72
3112.70
130
Code
0114
0115
0101
0123
0124
0002
0012
9999
9999
0115
4.2
4.2.7
Code
0293
0295
2206
2202
0983
2261
0367
2209
0114
0115
0101
0123
0124
0002
0012
9999
9999
0115
Discription
Unit QuantityRate
Beldar
Coolie
Bhishti
Mason 1st class
Mason Ilnd class
Mixer
Vibrator
Scaffolding
Sundries
(Extra labour for lifting.material upto floor
level) Coolie (0.75x1.50)
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 1 cum.
Say
Day
Day
Day
Day
Day
Day
Day
L.S.
L.S.
Day
0.90
0.78
0.70
0.06
0.06
0.07
0.07
114.40
13.52
1.13
135.25
135.25
138.45
151.50
141.60
400.00
200.00
1.00
1.00
135.25
Unit QuantityRate
cum
0.65
650.00
cum
cum
cum
cum
cum
tonne
tonne
0.24
0.65
0.24
0.47
0.47
0.22
0.22
700.00
57.83
53.21
320.00
53.21
4500.00
47.29
Day
Day
Day
Day
Day
Day
Day
L.S.
L.S.
Day
0.90
0.78
0.70
0.06
0.06
0.07
0.07
114.40
13.52
1.13
135.25
135.25
138.45
151.50
141.60
400.00
200.00
1.00
1.00
135.25
Amount
121.72
105.50
96.92
9.09
8.50
28.00
14.00
114.40
13.52
152.83
2612.75
26.13
2638.88
395.83
3034.71
3034.70
131
4.3
4.3.1
Code
7319
7326
7327
7328
7329
7330
9999
9999
0116
0114
9999
9999
Unit QuantityRate
each 0.34
980.00
each 0.085
280.00
each 0.17
1000.00
each 0.34
75.00
each 0.17
60.00
metre 0.2295
225.00
L.S
L.S
22.10
78.00
1.00
1.00
Day
Day
L.S
L.S
0.75
1.50
52.00
26.00
151.50
135.25
1.00
1.00
Amount
333.20
23.80
170.00
25.50
10.20
51.64
22.10
78.00
113.62
202.88
52.00
26.00
1108.94
11.09
1120.03
168.00
1288.03
119.26
119.25
132
4.3
4.3.2
Code
7319
7327
7328
7329
7330
9999
9999
0116
0114
9999
9999
4.3
4.3.3
Code
Unit QuantityRate
each 0.51
98.00
each 0.17
1000.00
each 0.51
75.00
each 0.255
60.00
metre 0.68
225.00
L.S
L.S
27.62
78.00
1.00
1.00
Day
Day
L.S
L.S
3.50
6.00
78.00
52.00
151.50
135.25
1.00
1.00
Unit QuantityRate
499.80
170.00
38.25
15.30
153.00
27.62
78.00
530.25
811.50
78.00
52.00
2453.72
24.54
2478.26
371.74
2850.00
180.38
180.40
and struts.
Amount
133
Code
7331
7332
7333
7334
9999
9999
0116
0114
9999
9999
4.4
4.4.1
Code
Discription
Assuming shuttering will become
unserviceable after use of 40 times
Add maintenance charges @ 10% of cost of
Material
Less salvage value of material after full use @
25% of cost of material
Wall form panel (1250x450)
Qty taken for cost of using once = 8x0.85/40 =
0.17
Corner angle 2.5m long
Qty taken for cost of using once = 4x0.85/40 =
0.085
Column clamp (450-1070mm)
Qty taken for cost of using once = 5x0.85/40 =
0.1063
Prop. 2m (2.0-3.5m)
Qty taken for cost of using once = 4x0.85/40 =
0.085
Assembly nut & bolt
Carriage
Labour
Fitter Grade-I
Beldar
Shuttering oil
Carriage
TOTAL
Add 1% for water charges
TOTAL
Add for contractors profit and overheads @
15%
Cost for 4.5 sqm.
Cost per sqm.
Say
Unit QuantityRate
each 0.17
900.00
each 0.085
275.00
each 0.1063
1100.00
each 0.085
750.00
L.S 27.62
L.S 52.00
1.00
1.00
Day
Day
L.S
L.S
151.50
135.25
1.00
1.00
1.00
2.00
39.00
26.00
Unit QuantityRate
cum 6.00
3257.45
Amount
153.00
23.38
116.93
63.75
27.62
52.00
151.50
270.50
39.00
26.00
923.68
9.24
932.92
139.94
1072.86
238.41
238.40
19544.70
19544.70
3257.45
3257.45
###
4.4.2
Providing and laying cement concrete in kerbs, steps and the lik
level excluding the cost of centring, shuttering and finishing.
1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20
Code
Discription
4.4
4.5
4.5.1
Code
Unit QuantityRate
cum 6.00
2791.05
Providing and fixing upto floor five level precast cement concre
courses, copings, bed plates, anchor blocks, plain window sills,
steps, stair cases, etc. including hoisting and setting in position
1:3 (1 Cement: 3 coarse sand), cost of required centring, shutte
smooth with 6mm thick cement plaster 1:3 (1 Cement: 3 fine sa
1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20m
Discription
Details of cost for Plain window sill 15 nos.
15x1m x 0.20m x 0.15m = 0.45cum.
Materials :
Cement concrete 1:2:4
(A) (Rate as per Item No. 4.2.3 )
Centering and shuttering
(1) Mould
(i) Plate 3mm thick(2x1xO.15)+(2xO.15xO.2O) = 0.36 sqm. @
23.55kg/m2 = 8.48 kg.
(ii) Flat 10x5mm
4x1.0 = 4.0m
8x0.2 = 1.6m
4x0.15 = 0.60m
Handle 2x0.25 = 0.5m
=6.70 m @ 0.4kg/m = 2.68 kg.
Total = 11.16kg. or 0.112 qtl.
Assuming shuttering will become
unserviceable after use of 40 times and
taking 75% credit.
Qty taken for cost of using once =
(B) 0.112x0.75/40 = 0.0021 qtl
(Rate as per item no.10.1 S.H. steel work)
2. Moulding Platform
Assuming platform will become
unserviceable after use of 40 times,
(i) Brick on edge flooring cement mortar 1-:6
1x2.0x2.0m = 4 sqm. Qty taken for cost of
using once = 4/40 = 0.1 sqm
Unit QuantityRate
cum 0.45
3579.10
kg
42.15
0.21
16746.30
16746.30
2791.05
2791.05
1610.60
8.85
135
Code
Discription
Unit QuantityRate
sqm 0.10
296.20
work)
(ii) 25mm thick cement concrete 1:2:4 in
pavement
2.00x2.00x0.025 = 0.10cum
Qty taken for cost of using once = 0.100/40
= 0.0025 cum
(D) Rate as per item no. 16.42 (Road work)
cum 0.0025
3638.55
Finishing
15x0.50 = 7.50sqm.
(E) Rate as per item No. 13.16
(G) Mortar and labour for hoisting and finishing
sqm 7.50
L.S 36.30
62.15
1.00
TOTAL
(H) Add for water charges @ 1 % on (G)
4.5
4.5.2
Code
TOTAL
Add for contractors profit and overheads @
15%on(G+H)
Cost for 0.45 cum.
Cost per cum.
Say
Providing and fixing upto floor five level precast cement conc
courses, copings, bed plates, anchor blocks, plain window sil
steps, stair cases, etc. including hoisting and setting in posit
1:3 (1 Cement: 3 coarse sand), cost of required centring, shu
smooth with 6mm thick cement plaster 1:3 (1 Cement: 3 fine
surfaces complete.
1:3:6 (1 cement: 2 coarse sand : 4 graded stone
aggregate 20mm nominal size).
Discription
Details of cost for Plain window sill 15 nos.
15x1m x 0.20m x 0.15m = 0.45cum.
Materials :
Cement concrete 1:3:6
(A) (Rate as per Item No. 4.2.5 ) of (S.H
concrete work
Centering and shuttering
(1) Mould
(i) Plate 3mm thick
(2x1x0.15)+(2x0.15x0.20) = 0.36 sqm. @
23.55kg/m2 = 8.48 kg.
(ii) Flat 10x5mm
4x1.0 = 4.0m
Unit QuantityRate
cum 0.45
3112.70
Amount
29.62
9.10
466.13
36.30
2160.59
0.36
2160.95
5.50
2133.45
4814.33
4814.35
Amount
1400.72
136
Code
Discription
8x0.2 = 1.6m
4x0.15 = 0.60m
Handle 2x0.25 = 0.5m
=6.70m@ 0.4kg/m = 2.68 kg.
Total = 11.16kg. or 0.112 qtl.
Assuming shuttering will become
unserviceable after use of 40 times and
taking 75% credit.
Qty taken for cost of using once =
0.112x0.75/40 = 0.0021 qtl
(B) (Rate as per item no.10.1 S.H. steel work)
2. Moulding Platform
Assuming platform will become
unserviceable after use of 40 times,
(i) Brick on edge flooring cement mortar1:6
1x2.0x2.0m = 4 sqm Qty taken for cost of
using once = 4/40 =0.1 sqm
(C) Rate as per item no. 11.1.2 (SH: Flooring
work)
(ii) 25mm thick cement concrete 1:2:4 in
pavement
2.00 x2.00x0.025 = 0.1
Qty taken for cost of using once = 0.100/40 =
0.0025 cum
(D) Rate as per item no. 16.42 (Road work)
Finishing
15x0.50 = 7.50sqm.
(E) Rate as per item No. 13.16
(G) Mortar and labour for hoisting and finishing
TOTAL
(H) Add for water charges @ 1 % on (G)
TOTAL
Add for contractors profit and overheads @
15%on(G+H)
Cost for 0.45 cum.
Cost per cum.
Say
Unit QuantityRate
kg
0.210
42.15
sqm 0.10
296.20
cum 0.0025
3688.55
sqm 7.50
L.S 36.30
62.15
1.00
Amount
8.85
29.62
9.10
466.13
36.30
1950.71
0.36
1951.07
5.50
1956.57
4347.93
4347.95
137
4.6
4.6.1
Code
9999
Unit QuantityRate
cum 0.60
3257.45
kg
0.1275
42.15
2. Moulding Platform
Assuming platform will become
unserviceable after use of 40 times.
(i) Brick on edge flooring cement mortar 1:6
1x2.0x2.0m = 4 sqm.
Qty taken for cost of using once = 4/40
= 0.1 sqm
(C ) Rate as per item no. 11.1.2 S.H.: Flooring
kg
0.10
296.20
work.
(ii) 25mm thick cement concrete 1:2:4 in
pavement
2.00x2.00x0.025 = 0.10
Qty taken for cost of using once = 0.100/40
= 0.0025 cum
(D) (Rate as per item no. 16.42 (Road work)
cum 0.0025
3638.55
Finishing
0.4(0.3+0.2+0.20)=0.28x25 = 7.0sqm.
(E) (Rate as per item no. 13.16)
(G) Mortar and labour for finishing
sqm 7.00
L.S. 30.54
62.15
1.00
TOTAL
(H) Add for water charges @ 1% on (G)
TOTAL
Add for contractors profit and overheads @
15%on(G+H)
Cost for 0.60 cum.
Cost per cum.
Say
1954.47
5.37
29.62
9.10
435.05
30.54
2464.15
0.31
2464.46
4.63
2469.09
4113.15
4115.15
138
4.7
4.7.1
Code
0115
0123
0114
Providing and fixing upto floor five level precast cement conc
including hoisting and setting in position with cement mortar
sand), cost of required centring, shuttering and finishing smo
cement plaster 1:3 (1 cement: 3 fine sand) on exposed surfac
1:2:4 ( 1 cement: 2 coarse sand : 4 graded stone aggregate 2
Description
Details of cost for 25 no blocks,
40x20x30cm
=25 no x 0.40m x 0.30m x 0.20m = 0.60 cum
Materials:
Cement concrete 1:2:4
Rate as per Item Nono. 4.1.3
Centering and shuttering
(1) Mould
(i) Plate 3mm thick
0.28 sqm. @ 23.55kg/m2 = 6.59 kg.
(ii) Flat 10x5mm
Handle
2x0.25 x0.4 = @ 0.4kg/m = 0.20 kg.
= 6.79kg. or 0.068 qtl.
Assuming shuttering will become
unserviceable after use of 40 times and
taking 75% credit.
Qty taken for cost of using once =
0.068x0.75/40 = 0.001275 qtl
(Rate as per item no. 10.1 S.H. steel work)
2. Moulding Platform
Assuming platform will become
unserviceable after use of 40 times,
(i) Brick on edge flooring cement mortar 1:6
1x2.0x2.0m = 4 sqm.
Qty taken for cost of using once = 4/40 =
0.1 sqm
Rate as per item no. 11.1.2 S.H.: Flooring
work.
(ii) 25mm thick cement concrete 1:2:4 in
pavement
2.00x2.00x0.025 = 0.10
Qty taken for cost of using once = 0.100/40
= 0.0025 cum
(Rate as per item no. 16.42 (Road work)
Mortar 1:3 for Fixing
(D) 0.202/100x25=0.051
Rate as per item no 3.8
Extra for Labour for fixing
(27/100x25=0.675 or 0.68)
(D) Coolie
Labour for hoisting and setting in position
(D) Mason 1st class
(D) Beldar
Finishing
25x2(0.4x0.3) =6.0sqm.
(Rate as per item no. 13.16)
TOTAL
(E) Add for water charges @ 1 % on (D)
TOTAL
Add for contractors profit and overheads @
Unit QuantityRate
cum 0.60
3257.45
kg
0.1275
42.15
kg
0.10
296.20
cum 0.0025
3638.55
cum 0.051
3169.60
day 0.68
135.25
day 0.60
day 3.60
151.50
135.25
sqm 6.00
62.15
15%on(D+E)
Cost for 0.60 cum.
Cost per cum.
Say
1954.47
5.37
29.62
9.10
161.65
91.97
90.90
486.90
372.90
320.88
8.31
3211.19
125.96
3337.15
5561.62
5561.90
139
4.7
4.7.2
Code
0115
0123
0114
Providing and fixing upto floor five level precast cement conc
including hoisting and setting in position with cement mortar
sand), cost of required centring, shuttering and finishing smo
cement plaster 1:3 (1 cement: 3 fine sand) on exposed surfac
1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20
Description
Details of cost for 25 no blocks,
40x20x30cm
=25 no x 0.40m x 0.30m x 0.20m = 0.6 cum
Materials:
(A) Cement concrete 1:3:6
(Rate as per Item no. 4.1.5 )
(B) Mortar for Fixing cement mortar 1:3
(Rate as per item no. 3.8)
Centering and shuttering
(1) Mould
(i) Plate 3mm thick.
0.28 sqm. @ 23.55kg/m2 = 6.59 kg.
(ii) Flat 10x5mm Handle
2x0.25 xO.4 = @ 0.4kg/m = 0.20 kg.
= 6.79kg. or 0.068 qtl.
Assuming shuttering will become
unserviceable after use of 40 times and
taking 75% credit.
Qty taken for cost of using once
= 0.068x0.75/40 = 0.001275 qtl
(Rate as per item no.10.1 S.H. steel work)
2. Moulding Platform
Assuming platform will become
unserviceable after use of 40 times,
(i) Brick on edge flooring cement mortar 1:6
1x2.0x2.0m = 4 sqm.
Qty taken for cost of using once = 4/40 =
0.1 sqm
Rate as per item no. 11.1.2 S.H.: Flooring
work.
(ii) 25mm thick cement concrete 1:2:4 in
pavement
2.00x2.00x0.025 = 0.100
Qty taken for cost of using once = 0.100/40
= 0.0025 cum
(Rate as per item no. 16.42 (Road work)
Finishing
(Rate as per item no. 13.16
Extra Labour for lifting material upto floor V
level
(C) Labour
Coolie
(C) Labour for hoisting and setting in position
Mason 1st class
Beldar
TOTAL
(D) Add for water charges @ 1 % on (B+C)
TOTAL
Add for contractors profit and overheads @
15% on (B+C+D)
Cost for 0.60 cum.
Unit QuantityRate
cum 0.60
cum 0.051
2791.05
3169.60
kg
42.15
0.1275
sqm 0.10
296.20
cum 0.0025
sqm 6.00
3638.55
62.15
day 0.68
135.25
day 0.60
day 3.60
151.50
135.25
1674.63
161.65
5.37
29.62
9.10
372.90
91.97
90.90
486.90
2923.04
8.31
2931.35
125.96
3057.31
5, 095.52
5095.50
140
4.8
4.8.1
Code
9999
0115
0123
0371
4.8
4.8.2
Code
Providing and fixing upto floor five level precast cement conc
including hoisting and setting in position with cement mortar
sand), cost of required centring, shuttering and finishing smo
cement plaster 1:3 (1 cement: 3 fine sand) on exposed surfac
1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 2
Description
Details of cost for one block of overall size
1m x 0.50m and 0.10m thick having 6 vertical
hollows, 40x20x30cm
finished contents = 1mx0.5mx0.1m = 0.05cum
Materials:
Cement concrete 1:2:4
(A) Netqty = 0.05 [6x0.5x{2x1/2(0.05+7)}x0.074]
= 0.023cum
(Rate as per Item no. 4.1.3)
(B) Centering and shuttering including T&P
charges, hire charges of steel mould, table
vibrator, rammer, bolts nuts & washers etc.
Extra for Finishing
(Rate as per item no.13.16)
(C) Extra Labour for lifting material upto floor V
level
Coolie
(C) Labour for hoisting and setting in position
Mason 1st class
Beldar
(D) Mortar for fixing cement mortar 1:2
(Rate as per item No. 3.7)
TOTAL
(E)) Add for water charges @ 1% on (B+C+D)
TOTAL
Add for contractors profit and overheads @
15% on (B+C+D+E)
Cost for 0.05 cum.
Cost per cum.
Say
Unit
Quantity
cum
0.023
L.S.
26.91
sqm
1.00
day
0.056
day
day
cum
0.05
0.30
0.002
Providing and fixing upto floor five level precast cement conc
including hoisting and setting in position with cement mortar
sand), cost of required centring, shuttering and finishing smo
cement plaster 1:3 (1 cement: 3 fine sand) on exposed surfac
1:3:6 (1 Cement: 3 coarse sand : 6 graded stone aggregate 2
Description
Details of cost for one block of overall size
1m x 0.50m and 0.10m thick having 6 vertical
hollows, 40x20x30cm
finished contents = lmx0.5mx0.lm = 0.05cum
Materials :
Cement concrete 1:3:6
(A) Net qty = 0.05 [6x0.5x{2xl/2(0.05+7)}x6.074]
= 0.023cum
(Rate as per Item no. 4.1.5 )
(B) Centering and shuttering including T&P
charges, hire charges of steel mould, table
vibrator, rammer, bolts nuts & washers etc.
Unit
Quantity
cum
0.023
L.S.
26.91
Amount
3257.45 74.92
1.00
26.91
62.15
62.15
135.25
7.57
151.50 7.58
135.25 40.57
3864.25 7.73
227.43
0.90
228.33
13.69
242.02
4840.40
4840.40
Amount
2 91.05 64.19
1.00
26.91
Code
Description
(C) Extra for Finishing
(Rate as per item no. 13.16)
(D) Extra Labour for lifting material upto floor V
level
Coolie
(D) Labour for hoisting and setting in position
Mason 1 st class
Beldar
(E) Mortar for fixing cement mortar 1:2
(Rate as per item No. 3.7)
TOTAL
Add for water charges @ 1% on (B+D+E)
TOTAL
Add for contractors profit and overheads @
15% on(B+D+E+F)
Cost for 0.05 cum.
Cost per cum.
Say
###
Unit QuantityRate
1.00
62.15
sqm
day
0.056
0.05
day
0.30
day
0.00
cum
135.25
151.50
135.25
3864.25
4.9
Code
Description
Details of cost for one bollard
Materials :
ement concrete 1:2:4
p/4x0.125x0.60 = .007cum
Rate as per Item no. 5.1.3 SH : RCC )
Centering and shuttering
3.14x(0.125)x0.60 = 0.24 sqm
(Rate as per Item no. 5.9.1 SH : RCC)
M.S. pipes (medium class)
50 mm dia sleeve =1x0.30x5.10=1.53 kg
40 mm dia pipe =1x0.45x3.61 =1.62 kg
M.S. plate 3mm thick =(0.15x0.15)x23.55
=0.53 kg
=3.68 kg
(Rate as per Item no. 10.1 SH : Steel work)
Excavation
0.25x0.25x0.45 = 0.03 cum
(Rate as per Item no. 2.8.1 SH : Earth work)
Cement concrete 1:3:6
(Rate as per Item no. 4.1.5 SH : Cement
concrete)
6 mm rendering (1:3) (0.24+0.01) = 0.25 sqm
(Rate as per Item no.5.53 : RCC)
Carriage and fixing charges
TOTAL
Add for water charges @ 1 % on (A)
TOTAL
Add for contractors profit and overheads @
15% on (A+B)
Cost for one bollard
Say
Unit QuantityRate
cum
sqm
kg
cum
cum
sqm
L.S.
0.007
3 359.60
0.24
119.25
3.68
42.15
0.03
103.40
0.03
2 791.05
0.25
62.15
13.00
1.00
Amount
62.15
7.57
7.58
40.57
7.73
216.70
0.90
217.70
13.69
231.29
4625.80
4625.80
23.52
28.62
155.11
3.10
83.73
15.54
13.00 (A)
322.62
0.13 (B)
322.75
1.97
324.72
324.70
142
4.10
Code
Description
Details of cost for 10 sqm
Cement concrete 1:2:4 (1 cement: 2 coarse
sand : 4 graded stone aggregate 12.5 mm
nominal size)
10x0.040 = 0.40 cum
Rate for Cement concrete 1:2:4 (1 cement: 2
coarse sand : 4 graded stone aggregate 20 mm
nominal size)
(As per item no 4.1.3)
Add Dedut for diffence of cost between 20mm
Size and 12.5mm size
Add for delay:
(A) Mason 1st class
(A) Mason 2nd class
(A) Sundries (Form work etc.)
TOTAL
(B) Add for water charges @ 1% on (A)
TOTAL
Add for contractors profit and overheads @
10% on (A+B)
Cost for 10 sqm
Cost for 1 sqm
Say
0123
0124
9999
Unit
Quantity
cum
0.40
cum
0.67
day
day
L.S.
0.40
0.40
1.95
4.11
Code
Description
Details of cost for 10sqm.
Materials :
Cement concrete 1:2:4 = 10x0.05 = 0.50 cum
(Rate as per item no. 4.1.3)
Add for delay :
(A) Mason 1st class
(A) Mason 2nd class
(A) Sundries (Form work etc.)
TOTAL
(B) Add for water charges @ 1 % on A
TOTAL
Add for contractors profit and overheads @
15% on A+B
Cost for 10 sqm.
Cost of 1 sqm.
Say
0123
0124
9999
Unit
Quantity
cum
0.50
day
day
L.S.
0.40
0.40
13.52
4.12
Code
Description
Details of cost for per bag of 50kg. of cement
Materials :
Approved water proofingmaterials according
to the recommended proportions
1213
Unit
Quantity
kg
1.00
Amount
3 257.45 1 302.98
0.00
0.0
151.50
141.60
1.00
60.60
56.64
1.95
1422.17
1.19
1423.36
18.06
1441.42
144.14
144.15
Amount
3257.45
1 628.72
151.50
141.60
1.00
60.60
56.64
13.52
1759.48
1.31
1760.79
19.81
1780.60
178.06
178.05
Amount
20.00
20.00
143
Code
9999
Description
Carriage of water proofing material and labour
for mixing etc.
TOTAL
Add for water charges @ 1%
TOTAL
Add for contractors profit and overheads @
15%
Cost per bag of cement of 50kg.
Say
4.13
Code
Description
0309
0771
0370
2211
0114
0115
0131
9999
Unit
L.S.
QuantityRate
3.64
1.00
Unit
QuantityRate
tonne
Litre
quintal
tonne
0.02
1.23
0.035
0.017
22 500.00
19.00
300.00
53.21
Day
Day
Day
0.12
0.07
0.20
135.25
135.25
141.60
L.S.
33.15
1.00
4.14
Code
Description
Details of cost per cum.
Extra labour element required for lifting of
materials (0.75x2.00 = 1.50)
Coolie
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost for 1 cum.
Say
0115
Unit
QuantityRate
Day
1.50
135.25
Amount
3.64
23.64
0.24
23.88
3.58
27.46
27.45
382.50
23.37
10.50
0.90
16.23
9.47
28.32
33.15
504.44
5.04
509.48
76.42
585.90
58.59
58.60
202.88
202.88
2.03
204.91
30.74
235.65
235.65
144
4.15
Code
Description
Details of cost for depth of water 0.30 m.
Quantity of concrete = 14 cum.
pumping hours = 3 hrs. or 0.75 day.
Cost of pumping water with 3636.8 litres
per hour capacity pump
Beldar for cleaning slush
TOTAL
Add 1% for water charges
TOTAL
Add for contractors profit and overheads @
15%
Cost of 14cum. per 0.30 m depth
Cost of cum. per m depth
Say
0011
0114
4.16
Code
0123
0124
0114
0115
Unit QuantityRate
Day 0.375
300.00
Day 4.00
135.25
Description
Details of cost for 1 cum.
Extra labour due to slow progressMason 1st class
Mason 2nd class
Beldar
Coolie
TOTAL
Add 1% for water charges
TOTAL
Add for contractors profit and overheads
15%
Cost for 1 cum.
Say
Unit QuantityRate
Day
Day
Day
Day
0.02
0.02
0.25
0.15
151.50
141.60
135.25
135.25
4.17
Code
Description
Detail of cost for 10 sqm
Materials
Brick aggregate 40 mm size
Carriage of brick aggregate
Fine sand 60 cu.dm. per 10 sqm
Carriage of fine sand
Dressing the gound including cutting and
filling upto 15cm
Beldar
Coolie
Cement concrete 1:3:6 Qty. of cement
concrete 1:3:6 on 10 sqm. area = 0.5cum.
Materials (for C.C 1:3:6)
0287
2260
0983
2261
0114
0115
Unit QuantityRate
cum
cum
cum
cum
0.75
0.75
0.06
0.06
360.00
57.83
320.00
53.21
Day 0.16
Day 0.11
135.25
135.25
112.50
541.00
653.50
6.54
660.04
99.01
759.05
180.73
180.75
ul positions.
Amount
3.03
2.83
33.81
20.29
59.96
0.60
60.56
9.08
69.64
69.65
145
Code
0295
0297
2202
0982
2203
0367
2209
0114
0123
0101
9999
9999
0 155
5114
6115
Description
Stone aggregate 20 mm nominal size
Stone aggregate 10 mm nominal size
Carriage of stone aggregate
Coarse sand
Carriage of coarse sand
Cement
Carriage of cement
Labour (for C.C 1:3:6)
Beldar
Mason 1st class
Bhisti
Hire and runing charges of mechanical mixer
Sundries
Labour
Mason
Beldar
Coolie
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
Unit
cum
cum
cum
cum
cum
tonne
tonne
QuantityRate
0.35
700.00
0.12
700.00
0.47
53.21
0.23
600.00
0.23
53.21
0.11
4500.00
0.11
47.29
Day
Day
Day
L.S.
L.S.
1.00
0.05
0.33
13.39
6.76
135.25
151.50
138.45
1.00
1.00
Day
Day
Day
0.27
1.08
1.08
146.55
135.25
135.25
Amount
245.00
84.00
25.01
138.00
12.24
495.00
5.20
135.25
7.58
45.69
13.39
6.76
39.57
146.07
146.07
1917.11
19.17
1936.28
290.44
2226.72
222.67
222.65
REINFORCED CEM
147
CED CEMENT
CONCRETE
149
5.1
5.1.1
Code
0295
0297
2202
0982
2203
0367
2209
0155
0114
0101
0002
0012
9999
5.1
5.1.2
Code
0295
0297
2202
0982
2203
0367
2209
0155
0114
0101
0002
0012
9999
Unit QuantityRate
cum
cum
cum
cum
cum
tonne
tonne
0.64
0.21
0.85
0.43
0.43
0.61
0.61
700.00
700.00
53.21
600.00
53.21
4500.00
47.29
Day
Day
Day
Day
Day
L.S.
0.17
2.00
138.45
0.07
0.07
14.30
146.55
135.25
0.90
400.00
200.00
1.00
Unit QuantityRate
cum
cum
cum
cum
cum
tonne
tonne
0.57
0.28
0.85
0.425
0.425
0.40
0.40
700.00
700.00
53.21
600.00
53.21
4500.00
47.29
Day
Day
Day
Day
Day
L.S.
0.17
2.00
0.9 0
0.07
0.07
14.30
146.55
135.25
138.45
400.00
200.00
1.00
5.1
5.1.3
Code
0295
0297
2202
0982
2203
0367
2209
0155
0114
0101
0002
0012
9999
5.2
5.2.1
Code
0295
0297
2202
0982
2203
0367
2209
0114
150
Quantity
Rate
Amount
cum
cum
cum
cum
cum
tonne
tonne
0.67
0.22
0.89
0.445
0.445
0.32
0.32
700.00
700.00
53.21
600.00
53.21
4500.00
47.29
469.00
154.00
47.36
267.00
23.68
1440.00
15.13
Day
Day
Day
Day
Day
L.S.
0.17
2.00
0.90
0.07
0.07
14.30
146.55
135.25
138.45
400.00
200.00
1.00
24.91
270.50
124.60
28.00
14.00
14.30
2892.48
28.92
2921.40
438.21
3359.61
3359.60
Quantity
Rate
Amount
cum
cum
cum
cum
cum
tonne
tonne
5.8752
1.9278
7.803
3.9015
3.9015
5.5998
5.5998
700.00
700.00
53.21
600.00
53.21
4500.00
47.29
4 112.64
1 349.46
415.20
2340.90
207.60
25199.10
264.81
Day
11.29
135.25
1526.97
Code
0115
0101
0123
0124
0002
0012
9999
9999
0115
Description
Coolie
Bhishti
Mason 1st class
Mason 2nd class
Mixer
Vibrator
Sundries
Scaffolding
Extra labour for lifting of material upto floor
V level: Coolie (0.75x9.18x2.5)
TOTAL
Add 1 % for water charges
TOTAL
Add for contractors profit and overheads @1
15%
Cost for 9.18 cum.
Cost for 1 cum.
Say
5.2
5.2.2
Code
0295
0297
2202
0982
2203
0367
2209
0114
0115
0101
0123
0124
0002
0012
9999
9999
0115
Description
Details of cost for 9.18 cum.
Materials :
20mm stone aggregate
10mm stone aggregate
Carriage of aggregate
Coarse sand
Carriage of coarse sand
Cement (0.2833 cum)
Carriage of cement
Labour:
Beldar
Coolie
Bhishti
Mason 1st class
Mason 2nd class
Mixer
Vibrator
Sundries
Scaffolding
Extra labour for lifting of material upto floor
V level: Coolie (0.75x9.18x2.5)
TOTAL
Add 1% for water charges
TOTAL
Add for contractors profit and
overheads @ 15 %
Cost for 9.18 cum.
Cost for 1 cum.
Say
151
Unit
Day
Day
Day
Day
Day
Day
L.S.
L.S.
Day
Quantity
7.53
8.26
0.92
0.92
0.64
0.64
131.82
420.03
17.20
Rate
135.25
138.45
151.50
141.60
400.00
200.00
1.00
1.00
135.25
Amount
1 018.43
1 143.60
139.38
130.27
256.00
128.00
131.82
420.03
2326.30
41110.51
411.11
41521.62
6 228.24
47749.86
5201.51
5 201.50
Quantity
Rate
Amount
cum
cum
cum
cum
cum
tonne
tonne
5.2326
2.5704
7.803
3.9015
3.9015
3.672
3.672
700.00
700.00
53.21
600.00
53.21
4500.00
47.29
3 662.82
1 799.28
415.20
2340.90
207.60
16 524.00
173.65
Day
Day
Day
Day
Day
Day
Day
L.S.
L.S.
Day
11.29
7.53
8.26
0.92
0.92
0.64
0.64
131.82
420.03
17.20
135.25
135.25
138.45
151.50
141.60
400.00
200.00
1.00
1.00
135.25
1 526.97
1 018.43
1 143.60
139.38
130.27
256.00
128.00
131.82
420.03
2326.30
32 344.25
323.44
32 667.69
4900.15
37 567.84
4092.36
4092.35
5.2
5.2.3
Code
0295
0297
2202
0982
2203
0367
2209
0114
0115
0101
0123
0124
0002
0012
9999
9999
0115
5.3
Code
Description
Details of cost for 1 cum.
Materials:
Stone aggregate 20mm
Stone aggregate 10mm
Carriage of aggregate
Coarse sand
Carriage of coarse sand
Cement (0.02225/ cum)
Carriage of cement
Labour:
Mason
Beldar
0295
0297
2202
0982
2203
0367
2209
0155
0114
152
Quantity
Rate
Amount
cum
cum
cum
cum
cum
tonne
tonne
6.1506
2.0196
8.1702
4.0851
4.0851
2.9376
2.9376
700.00
700.00
53.21
600.00
53.21
4500.00
47.29
4 305.42
1 413.72
434.74
2 451.06
217.37
13 219.20
138.92
Day
Day
Day
Day
Day
Day
Day
L.S.
L.S.
Day
11.29
7.53
8.26
0.92
0.92
0.64
0.64
131.82
420.03
17.20
135.25
135.25
138.45
151.50
141.60
400.00
200.00
1.00
1.00
135.25
1526.97
1 018.43
1 143.60
139.38
130.27
256.00
128.00
131.82
420.03
2326.30
29 401.23
294.01
29 695.24
4454.29
34 149.53
3 719.99
3720.00
Quantity
Rate
Amount
cum
cum
cum
cum
cum
tonne
tonne
0.67
0.22
0.89
0.445
0.445
0.32
0.32
700.00
700.00
53.21
600.00
53.21
4500.00
47.29
469.00
154.00
47.36
267.00
23.68
1440.00
15.13
Day
Day
0.24
2.75
146.55
135.25
35.17
371.94
Code
0101
0002
0012
9999
0115
Description
Bhishti
Mixer
Vibrator
Sundries
Extra labour for lifting material upto floor V
level:
Coolie (1.5x0.75)
TOTAL
Add 1% for water charges
TOTAL
Add for contractors- profit and overheads @
15%
Cost for 1 cum.
Say
5.4
Code
Description
Details of cost for 1 cum.
(A) Materials: Cement concrete 1:2:4 (Rate as
per item no 4.4.1)
Labour:
Extra labour for laying CC in RCC work :
(B) Beldar
(B) Bhishti
(B) Mason 1st class
(B) Mason 2nd class
(B) Mate
(B) Extra labour for lifting material upto floor V
level: Coolie (1.5x0.75)
TOTAL
(C) Add 1 % for water charges on (B)
TOTAL
Add for contractors profit and overheads @
15% on (B+C)
Cost for 1 cum.
Say
0114
0101
0123
0124
0128
0115
5.5
Code
Description
Details of Cost for semicircular arch 6m clear
span and 9m long and 30cm thick.
Cement concrete 1:2:4
= 1x0.50x3.14x6.30x9.00x0.30 = 26.73cum.
Details of cost for 26.73 cum.
Material
Stone aggregate 20mm
Stone aggregate 10mm
Carriage of aggregate
295
0297
2202
153
Unit
Day
Day
Day
L.S.
Quantity
0.90
0.08
0.08
14.30
Rate
138.45
400.00
200.00
1.00
Amount
124.60
32.00
16.00
14.30
Day
1.13
135.25
152.83
3163.01
31.63
3194.64
479.20
3 673.84
3673.85
Quantity
Rate
Amount
cum
1.00
3257.45
3257.45
Day
Day
Day
Day
Day
Day
0.10
0.20
0.04
0.04
0.04
1.13
135.25
138.45
151.50
141.60
138.45
135.25
13.52
27.69
6.06
5.66
5.54
152.83
3468.75
2.11
3470.86
32.01
3502.87
3502.85
Quantity
Rate
Amount
cum
cum
cum
17.9091
5.8806
23.7897
700.00
700.00
53.21
12536.37
4116.42
1265.85
Code
0982
2203
0367
2209
0155
0114
0101
0002
0012
9999
0123
0124
0101
0115
Description
Coarse sand
Carriage of coarse sand
Cement (0.02225/ cum)
Carriage of cement
Labour:
Mason
Beldar
Bhishti
Mixer
Vibrator
Sundries
Extra for laying CC over curved surfaces
Mason 1st class
Mason 2nd class
Bhishti
Coolie
Extra labour for lifting material upto floor V
level: Coolie (1.50x0.75x26.73)
TOTAL
Add 1% for water charges
TOTAL
Add15% for contractors profit and overheads @
Cost for 26.73 cum.
Cost for 1 cum.
Say
5.6
Code
Description
Details of cost for 1 cum.
Materials :
R.C.C. 1:2:4 in.chimneys & shafts
(A) Rate as per item no. 5.2.3
Extra labour involved for lifting materials :
(B) Coolie
TOTAL
(C) Add 1% for water charges on B
TOTAL
Add 15%for contractors profit and overheads @
on B+C
Cost for 1 cum.
Say
0115
5.7
Code
Description
Details of cost for 1 cum.
Materials:
R.C.C. 1:2:4 in well steining
Rate as per item no 4.1.3
154
Unit
cum
cum
tonne
tonne
Quantity
11.8948
11.8948
8.5536
8.5536
Rate
600.00
53.21
4500.00
47.29
Amount
7136.88
632.92
38491.20
404.50
Day
Day
Day
Day
Day
L.S.
2.673
45.57
18.711
1.8711
1.8711
401.89
146.55
135.25
138.45
400.00
200.00
1.00
391.73
6163.34
2590.54
748.44
374.22
401.89
Day
Day
Day
Day
Day
5.00
5.00
1.50
4.50
30.07
151.50
141.60
138.45
135.25
135.25
757.50
708.00
207.68
608.62
4066.97
81603.07
816.03
82 419.10
12 362.86
94 781.96
3545.90
3545.90
Quantity
Rate
Amount
cum
1.00
3720.00
3720.00
Day
0.26
135.25
35.16
3 755.16
0.35
3 755.51
5.33
3 760.84
3 760.85
Quantity
Rate
Amount
cum
1.00
3257.45
3257.45
Code
0115
Description
Labour.
Extra labour involved :
(B) Coolie
TOTAL
(C) Add 1% for water charges on B
TOTAL
Add 15%for contractors profit and overheads @
on B+C
Cost for 1 cum.
Say
5.8
Code
Description
Details of cost for 4 RCC Vertical fins 4m
high and lm center with 2 horizontal fins, all
projecting 60cm from face of wall and 5cm
thick = 0.66 cum.
Cement Concrete 1:1.5.3
4x4x0.60x0.05 = 0.48 cum
2x3x0.06x0.05 = 0.18 cum
Total = 0.66 cum.
Materials:
Stone aggregate 20mm
Stone aggregate 10mm
Carriage of aggregate
Coarse sand
Carriage of coarse sand
Cement (0.2833 cum)
Carriage of cement
Labour:
Beldar
Coolie
Bhishti
Mason 1 st class
Mason 2nd class
Scafolding
Sundries
Mixer
Vibrator
Extra for lifting materials upto floor five level
: Coolie
Extra for restricted working in fins
Mason 1st class
Mason 2nd class
Beldar
Bhishti
TOTAL
Add 1% for water charges
TOTAL
Add for contractors profit and overheads @
15%
Cost for 0.66 cum.
Cost for 1 cum.
Say
0295
0 297
2202
0982
2203
0367
2209
0114
0115
0101
0123
0124
9999
9999
0002
0012
0115
0123
0124
0114
0101
155
Unit
Quantity
Rate
Amount
Day
0.08
135.25
10.82
3268.27
0.11
3 268.38
1.64
3 270.02
3 270.00
Quantity
Rate
Amount
cum
cum
cum
cum
cum
tonne
tonne
0.3762
0.1848
0.561
0.2805
0.2805
0.264
0.264
700.00
700.00
53.21
600.00
53.21
4500.00
47.29
263.34
129.36
29.85
168.30
14.93
1188.00
12.48
Day
Day
Day
Day
Day
L.S.
L.S.
Day
Day
Day
0.79
0.56
0.60
0.06
0.06
30.16
9.49
0.05
0.05
0.18
135.25
135.25
138.45
151.50
141.60
1.00
1.00
400.00
200.00
135.25
106.85
75.74
83.07
9.09
8.50
30.16
9.49
20.00
10.00
24.34
Day
Day
Day
Day
0.05
0.05
0.10
0.15
151.50
141.60
135.25
138.45
7.58
7.08
13.52
20.77
2 232.45
22.32
2 254.77
338.22
2 592.99
3 928.77
3 928.75
5.9
5.9.1
Code
Description
Details of cost for footing size
2.7mx2.7mx 1.00m
Contact area = 10.8 sqm.
Materials:
Assuming shuttering material will become
unserviceable after use of 40 times
Adding for maintenance @ 10% of cost
Taking salvage value after full use of material
@ 25% of cost
Wall form panel 1250x500mm
Qty taken for cost of using once = 16x0.85/40
= 0.34
Corner angle (1.5m long)
Qty taken for cost of using once = 4x0.85/40
= 0.085
100mm channel shoulders 2.5m long
Qty taken for cost of using once = 8x0.85/40
= 0.17
Double clip (bridge clip)
Qty taken for cost of using once = 16x0.85/40
= 0.34
Single clip
Qty taken for cost of using once = 8x0.85/40
= 0.17
MS tube 40mm - 4x2.7m = 10.8m
Qty taken for cost of using once =
10.8x0.85/40 = 0.2295
Assembly nuts & bolts
Qty taken for cost of using once =
1040x0.85/40 = 8.50
Carriage
Labour:
Fitter Grade-I
Beldar
Shuttering oil
Sundries
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost for 10.8 sqm.
Cost per sqm.
Say
7319
7326
7327
7328
7329
7330
9999
9999
0 116
0 114
9999
9999
156
Quantity
Rate
Amount
each
0.34
980.00
333.20
each
0.085
280.00
23.80
each
0.17
1000.00
170.00
each
0.34
75.00
25.50
each
0.17
60.00
10.20
metre
0.2295
225.00
51.64
L.S.
22.10
1.00
22.10
L.S.
78.00
1.00
78.00
Day
Day
L.S.
L.S.
0.75
1.50
52.00
26.00
151.50
135.25
1.00
1.00
113.62
202.88
52.00
26.00
1108.94
11.09
1120.03
168.00
1288.03
119.26
119.25
5.9
5.9.2
Code
Description
Details for 7.9m long and 1,00m high wall
Area of contact 2x7.9x1.0 = 15.8 sqm.
Materials :
Assuming shuttering material will become
unserviceable after use of 40 times
Adding for maintenance @ 10% of cost
Taking salvage value after full use of material
@ 25% of cost
Wall form Panel (1.25x0.5) 2x3x2x2 = 24Nos.
7319
7327
7328
7329
7330
9999
9999
0116
0114
9999
9999
157
Quantity
Rate
Amount
each
0.51
980.00
499.80
each
0.17
1 000.00
170.00
each
0.51
75.00
38.25
each
0.255
60.00
15.30
metre
0.68
225.00
153.00
L.S.
27.62
1.00
27.62
L.S.
78.00
1.00
78.00
Day
Day
L.S.
L.S.
3.50
6.00
78.00
52.00
151.50
135.25
1.00
1.00
530.25
811.50
78.00
52.00
2453.72
24.54
2 478.26
371.74
2 850.00
180.38
180.40
5.9
5.9.3
Code
Description
Detail of cost for a room
4.50x3 = 13.50 sqm, height 3.5 m
Materials :
Adding for maintenance @ 10% of cost
Taking salvage value after full use of material
@ 25% of cost
1. Plates (size 0.75x0.60)
Angle 40x40x5mm
2x0.75= 1.50 m
2x0.60= 1.20 m
= 2.70 m @ 3.00 kg/m = 8.10 kg
sheet 1.6 mm thick
0.75x0.60 = 0.45 sqm
0.45 sqm @ 12.55kg/sqm = 5.65kg
Weight of one plate = 13.75kg
Add for wastage @ 5% = 0.69 kg
Total = 14.44kg
Total weight of all plates = 5x6x14.44 =
433.20 kg.
Qty taken for cost using once = 433.2x0.85/40
= 9.2055 kg.
(X) Rate as per item no 10.1
2. Adjustable span- ESOSI (2.35-3.40m)
Qty taken for cost using once = 5x0.85/40 =
0.1063
3. Adjustable telescopi prop 3m(2.02-3.75m)
Qty taken for cost using once = 6x0.85/40 =
0.1275
4. Assembly nut & bolts etc.
Qty taken for cost using once = 1040x0.85/40 =
22.10
Carriage
Labour:
Fitter grade-I
Beldar
Shuttering oil
Sundries, paper tape etc
TOTAL
Add 1% for water charges except on X
TOTAL
Add for contractors profit and overheads @
15% except on X
Cost for 13.50 sqm.
Cost per sqm.
Say
7342
7343
9999
99990116
0114
9999
9999
158
Quantity
Rate
Amount
kg
each
9.2055
0.1063
42.15
1 600.00
388.01
170.08
each
0.1275
1 000.00
127.50
L.S.
22.10
1.00
22.10
L.S.
130.00
1.00
130.00
Day
Day
L.S.
L.S.
3.00
6.00
78.00
49.70
151.50
135.25
1.00
1.00
454.50
811.50
78.00
50.02
2231.71
18.44
2250.15
279.32
2529.47
187.37
187.35
5.9
5.9.4
Code
7342
7343
9999
9999
0116
0114
9999
9999
159
Quantity
Rate
Amount
kg
each
9.2055
0.1063
42.15
1 600.00
388.01
170.08
each
0.1275
1 000.00
127.5
L.S.
22.10
1.00
22.10
L.S.
130.00
1.00
130.00
Day
Day
L.S.
L.S.
6.00
6.00
78.00
49.70
151.50
135.25
1.00
1.00
454.50
811.50
78.00
50.02
2231.71
18.44
2250.15
279.32
2529.47
187.37
187.35
5.9
5.9.5
Code
Description
Consider a beam of 6 m clear span, 0.50 m
deep 0.30 m wide and height 3.5 m from floor
Cubical contents
6.60x0.5x0.3 = 0.99 cum
1x1.30x6.00 = 7.80 sqm
Materials :
Assuming shuttering will become
unserviceable after use of 40 times
Add maintenance charges @ 10% of cost of
material
Less salvage value of material after full use @
25% of cost of material
1. Steel plates for side and bottom (plate size
1.20 x 0.50m)
Angle 40x40x5mm
2x1.20 = 2.40 m ^
3x0.50= 1.50 m
Total 3.90 m @ 3.00 kg/m = 11.70 kg
sheet 1.6 mm thick
1.20m x 0.50 m= 0.60 sqm.
0.60 sqm @ 12.55 kg/sqm. = 7.53 kg.
Weight of one plate = 19.23 kg. -
Add for wasdge 5% 0.96 kg.
Total =20.19 Kg.
Total weight of all plates
3x5x20.19 = 302.85 kg or 3.03 q
Qty taken for cost of using once =
302.85 x 85/40 = 6.4356 kg.
(X) Rate as per item no 10.1
(ii) Props 3m (adjustable telescopic 2.02 3.75m)
Qty taken for cost of using once = 6x0.85/40 =
0.1275 m
(iii) Beam clamp 300-380 mm(450-1070mm)
Qty taken for cost of using once = 5/0.85/40 =
0.1063 m
(iv) Assembly nut & bolts etc.
Qty taken for cost of using once =
1040x0.85/40 = 22.10
Carriage
Labour:
Fitter Grade-I
Beldar
Shuttering oil
Sundries, paper tape etc.
TOTAL
Add 1% for water charges except on X
TOTAL
Add for contractors profit and overheads @
15% except on X
Cost for 7.80 sqm.
Cost per sqm.
Say
7343
7344
9999
9999
0116
0114
9999
9999
160
Quantity
Rate
Amount
kg
each
6.4356
0.1275
42.15
1 000.00
271.26
127.50
each
set
0.1063
375.00
39.86
L.S.
22.10
1.00
22.10
L.S.
78.00
1.00
78.00
Day
Day
L.S.
L.S.
1.25
2.50
39.00
24.39
151.50
135.25
1.00
1.00
189.38
338.12
39.00
24.61
1129.53
8.59
1138.42
130.07
1268.49
162.63
162.65
5.9
5.9.6
Code
Description
Detail of cost for
Size of column 450x450mm and 2.5m high
Area of contact = 4x0.45x2.5 = 4.5 sqm.
Assuming shuttering will become
unserviceable after use of 40 times
Add maintenance charges @ 10% of cost of
material
Less salvage value of material after full use @
25% of cost of material
Wall form panel (1250x450) x
Qty taken for cost of using once = 8x0.85/40 =
0.17
Corner angle 2.5m long
Qty taken for cost of using once = 4x0.85/40 =
0.085
Column clamp (450-1070mm)
Qty taken for cost of using once = 5x0.85/40 =
0.1063
Prop. 2m(2.0-3.5m)
Qty taken for cost of using once = 4x0.85/40 =
0.085
Assembly nut & bolt
Qty taken for cost of using once =
1300x0.85/40 = 27.62
Carriage
Labour
Fitter Grade-I
Beldar
Shuttering oil
Carriage
TOTAL
Add 1% for water charges
TOTAL
Add for contractors profit and overheads @
15%
Cost for 4.5 sqm.
Cost per sqm.
Say
7331
7332
7333
7334
9999
9999
0 116
0114
9999
9999
5.9
5.9.7
Code
161
Quantity
Rate
Amount
each
0.17
900.00
153.00
each
0.085
275.00
23.38
each
0.1063
1100.00
116.93
each
0.085
750.00
63.75
L.S.
27.62
1.00
27.62
L.S.
52.00
1.00
52.00
Day
Day
L.S.
L.S.
1.00
2.00
39.00
26.00
151.50
135.25
1.00
1.00
151.50
270.50
39.00
26.00
923.68
9.24
932.92
139.94
1072.86
238.41
238.40
Quantity
Rate
Amount
Code
1198
1197
0302
2204
0112
0114
9999
5.9
5.9.8
Code
Description
Face of landing
1x1.30x0.15 = 0.20 sqm.
Side of waist
2.69x0.13 =0.35 sqm.
Side of steps8x0.50x0.30x0.15 = 0.18sqm.
Total = 5.79 sqm.
Wastage 5% = 0.29sqm.
Total = 6.08 sq.
Cubical content6.08x0.038 = 0.231 cum = 231 dm3
Qty taken for cost using once = 231/8= 28.875
dm3
(ii) Batten 100mm x 75mm
(2nd class kail wood in scantling)
4x1.30x0.100x0.075=0.039 cum = 39 dm3
Qty taken for cost using once = 39/8 = 4.875
dm3
(iii) Safeda Bailies 125mm dia.
2x4x0.80 = 6.40m
Qty taken for cost using once = 6.4/8 = 0.8 m
Carriage of timberPlanks = 0.231 cum.
Battens = 0.039 cum.
Bailies 6.4x3.142/4x(0.125)2 = 0.079cum.
Total =0.349 cum.
Qty taken for cost using once = 0.349/8 =
0.04363 cum
Labour:
For assembling, erection, dismantling and
cleaning
Carpenter 2nd class
Beldar
Sundries
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 5.79 sqm.
Cost per sqm.
Say
162
Unit
Quantity
Rate
Amount
10 cudm
28.875
178.00
513.98
10 cudm
4.875
160.00
78.00
metre
0.80
29.00
23.20
cum
0.04363
60.81
2.65
Day
Day
L.S.
1.75
1.00
16.12
141.60
135.25
1.00
247.80
135.25
16.12
1017.00
10.17
1027.17
154.08
1181.25
204.02
204.00
Quantity
Rate
Amount
sqm
1.40
162.65
227.71
sqm
3.22
180.40
580.89
sqm
1.66
204.00
338.64
1147.24
182.68
182.70
5.9
5.9.9
Code
Description
Details of cost for a semicircular arch 3.6m
clear span and 3.6m long.
Area of centering = 22x1.8x3.6=20.37sqm.
Material:
Frame work in 2nd class kail wood
Tie-1x3.6x0.15x0.20
= 0.108cum.
Struts-3xl.8x0.10x0.10 =0.054cum
Struts-2x2.55x0.10x0.10=0.051 cum.
Ribs-4xl.38x.075x0.075=0.031cum.
Total = 0.244 cum.
Quantity for 7 such frames
7x0.244 =1.708cum.
Strips 5cmx2.5cm = 7.5cm
center to center
5.66/0.075x0.05x0.025x3.6 = 0.342cum.
Total = 2.050 cum = 2050 cudm
Qty taken for cost using once = 2050/8 =
256.25 cudm
Safeda Balli supports 12.5cm dia
7x4x3.6= 100.8m
Qty taken for cost using once = 100.8/8 = 12.6
in G.I. Plain sheet 20.37 sqm = 116kg. Or 1.16
quintal
Qty taken for cost using once =1.16/8 = 0.145
qtl
CarriageKail wood = 2.05cum.
1197
6302
0992
2204
2302
0 112
0114
9999
163
Quantity
Rate
Amount
10 cudm
256.25
160.00
4100.00
metre
12.60
29.00
365.40
quintal
0.145
3450.00
500.25
cum
0.4112
60.81
25.01
tonne
0.0145
47.29
0.69
Day
Day
L.S.
16.00
13.00
11.70
141.60
135.25
1.00
2 265.60
1758.25
11.70
9026.90
90.27
9117.17
1367.58
10 484.75
514.72
514.70
Description
Details of cost per sqm.
Centering and shuttering for arches and carved
surface exceeding 6m in span (an average of
8m)
Radius R = 5m
2R-2=4+4
1197
2204
1225
1034
2302
0112
0114
9999
2x53.2 = 106
Surface area
=2x22/7x5x3.6x106/360=33.3lsqm.
Arc=9.25m
Material:
Tie-2x8xO. 18x0.05 =0.144cum
Struts-2x2.5x0.1x0.1 =0.050cum.
Struts-2xl .77x0.1 xO. 1 =0.035cum.
Ribs-6x 1.54x0.23x0.1 =0.213cum.
Struts-2x 1.72x0.1 xO. 1 =0.034cum.
Total=0.476cum.
For four such frames
=0.476x4= 1.904 cum.
laggings-75x3.6x0.125x0.075=2.531cum.
Tie-2x3.6xO.225xO.O38=O.O62cum.
Brace-3x2x2.14x0.225x0.038=0.110cum
Brace-3x4x3.8x0.225x0.038=0.390 cum
Sleepers-4x3.6x0.20x0.15=0.432 cum
Sleepers-2x4x3.6xO. 175x0.075=0.378
Vertical post-4x4x-3.6x0.15x0.15=1.296
Total =7.103cum. or 7103 cudm
Qty taken l/8th of qty for cost using once =
7.103/8 = cum = 887.9 Cudm
Carriage of wood
Fittings:
3 way straps 50mmxl 0mm = 32 Nos.
32 no. @0.50cm each = 16m
Straps-50mmxl0mm = 8 Nos. @0.25cm each
= 2m
= 18m
18m, wt @ 3.9kg/m = 70.2 kg. = 0.702q
Qty taken l/8th of qty for cost using once =
0.702/8 = 0.08775
Bolts 160 Nos. 254 mm long 16mm dia.160x.254x 1.58=64.21 kg=0.64q. s
Qty taken l/8th of qty for cost using once =
0.64/8 = 0.08
Carriage of steel = 0.1342t
Qty taken l/8th of qty for cost using once =
0.1342/8 = 0.01677 cum
Labour:
Carpenter 2nd class
Beldar
Sundries
Less Cost of shuttering etc. for an arch
exceeding 6 m span i.e. for an average of 8 m
span
164
Quantity
Rate
Amount
10cudm
887.90
160.00
14206.40
cum
0.8879
60.81
53.99
quintal
0.0878
2900.00
254.62
quintal
0.08
4300.00
344.00
tonne
0.0168
47.29
0.79
Day
Day
L.S.
28.00
24.00
134.55
141.60
135.25
1.00
3964.80
3246.00
134.55
Code
Description
(A) Rate as per item no 5.9.9
TOTAL
Add 1% for water charges on all exept A
TOTAL
Add 15%for contractors profit and overheads @
on all exept A
cost of 33.31 sgm.
cost per sgm of soffit area
Say
7319
7327
7328
7329
7330
9999
9999
0116
0114
9999
9999
Description
Details for 7.9m long and 1.00m high wall
Area of contact 2x7.9x1.0 = 15.8 sqm.
Materials :
Adding for maintenance @ 10% of cost
Taking salvage value after full use of material
@ 25% of cost
Wall form Panel (1.25x0.5) 2x3x2x2 = 24 Nos.
Qty taken for cost of using once = 24x0.85/40
= 0.51
100 mm channel shoulder 2.5m long, 4x2 = 8
Qty taken for cost of using once = 8x0.85/40=
= 0.17
Bridge clip 2x6x2 = 24
Qty taken for cost of using once = 24x0.85/40
= 0.51
Single clip 2x3x2 = 12
Qty taken for cost of using once = 12x0.85/40
= 0.255
M.S. Tube 40mm 2x2x8m = 32m
Qty taken for cost of using once = 32x0.85/40
= 0.68
Nut & Bolts
Qty taken for cost of using once =
1300x0.85/40= 27.63
Carriage
Labour:
Fitter Grade-I
Beldar
Shuttering oil
Sundries
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost for 15.8 sqm.
Cost per sqm.
Say
165
Unit
sqm
Quantity
33.31
Rate
514.70
Amount
(-)17144.66
5060.49
222.05
5282.54
3364.08
8646.62
259.58
259.60
Quantity
Rate
Amount
each
0.51
980.00
499.80
each
0.17
1000.00
170.00
each
0.51
75.00
38.25
each
0.26
60.00
15.30
metre
0.68
225.00
153.00
L.S.
27.63
1.00
27.63
L.S.
78.00
1.00
78.00
Day
Day
L.S.
L.S.
3.50
6.00
78.00
52.00
151.50
135.25
1.00
1.00
530.25
811.50
78.00
52.00
2453.73
24.54
2478.27
371.74
2850.01
180.38
180.40
5.9
5.9.12 Well steining
Code
Description
Details of cost 26.39 sqm.
Surface area
Outside area =22/7x4.40x1.00 - 13.82sqm.
= 26.39 sqm.
Assuming that the timber will become
unserviceable after being used 8 times
Add for carriage, labour for erection and
dismantling etc. @ l/6th of the cost of
material
Planks 38 mm (Seconti class kail wood)
26.39x0.038= 1.00cum.
Wastage 20% = 0.20cum.
= 1.20cum. or 1200 cudm.
Qty for cost using once = 1200 x (1/8+1/6) =
350 Cudm
2nd class kail wood battens
Inside = 2x25x0.50x0.075x0.038 =
0.0712cum.
Outside = 2x28x0.50x0.075x0.038 =
0.0798cum.
= 0.1510cum.
Wastage 5% = 0.0076 cum.
= 0.1586cum. or 158.60 cudm
Qty for cost using once = 0.1586 x (1/8+1/6)
= 46.26 cudm
Safeda bailies 125mm dia.
Inside: 25x1.00 = 25.00m
Outside: 28x1.00 = 28.00m
= 53.00m
Qty for cost using once = 53 x (1/8+1/6) =
15.46 m
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overhead
Cost for 26.39sqm.
Cost per sqm.
Say
1198
1197
0 302
5.9
Centring and shuttering inclu
5.9.13 Vertical and horizontal fins individually or forming box louvers
eaves boards.
Code
Description
Details of cost for fins 4 vertical fins 4 metre
high and at 1 metre centres, with two
166
ring and shuttering including strutting, propping etc. and removal of form for :
Unit
Quantity
Rate
Amount
10 cudm
350.00
178.00
6230.00
10 cudm
46.26
160.00
740.16
metre
15.46
29.00
448.16
7418.50
74.18
7492.68
1123.90
8616.58
326.51
326.50
e = 2x28x0.50x0.075x0.038 =
ge 5% = 0.0076 cum.
86cum. or 158.60 cudm
cost using once = 0.1586 x (1/8+1/6)
ring and shuttering including strutting, propping etc. and removal of form for :
ly or forming box louvers band, facias and
s boards.
Unit
Quantity
Rate
Amount
Code
1198
1197
0302
2204
0112
0114
9999
Description
horizontal fins all projecting 60cm from face
of wall and 5 cm thicki.e.4x4x1.215+2x3x0.65=23.90 sqm
Materials :
(i) Planks 2nd class kail wood 38mm
thick4x4x1.25=20.00
23x0.65 =3.90
= 23.90
Wastage @ 5% = 1.20
= 25.10sqm.
25.10x0.038=.954 cum or 954 cudm
Qty for cost using once = 954/8 = 119.25 cudm
(ii) Battens (2nd class kail wood)4x2x5x0.60x0.075x0.050=0.090
3x2x5x1.00x0.075x0.050=0.112
2x6x0.60x0.075x0.100=0.054
= 0.256 Cum.
Wastage 5% =0.013 cum
= 0.269 cum= 269 cudm
Qty for cost using once = 269/8 = 33.625 cudm
(iii) Safeda Bailies 125mm dia2x2x6x4.00 =96m
Wastage @5% = 4.8m
= 100.8 m
Qty for cost using once = 100.8/8 = 12.6 m
(iv) Carriage timberPlanks = 0.954
Battens = 0.269
Bailies 100.8x(.125)2 /4x3.142=1.238cum.
= 2.461 cum
Qty for cost using once = 2.461/8 = 0.3076 cum
Labour:
For assembling, erection, dismantling and
cleaning
Carpenter 2nd class
Beldar
Sundries
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost for 25.10 sqm.
Cost per sqm.
Say
5.9.14 Extra for shuttering in circular work sqm 20% of respective cen
167
Unit
Quantity
Rate
Amount
10 cudm
119.25
178.00
2122.65
10 cudm
33.625
160.00
538.00
meter
12.60
29.00
365.40
cum
0.3076
60.81
18.71
Day
Day
L.S.
11.00
11.00
80.73
141.60
35.25
1.00
1557.60
1487.75
80.73
6170.84
61.71
6232.55
934.88
7167.43
285.56
285.55
7319
7326
7327
7328
7329
7330
9999
9999
0116
0114
9999
9999
Description
Details of cost for footing size
2.7mx2.7mxl.00m
Contact area = 10.8 sqm.
Assuming shuttering material will become
unserviceable after use of 40 times
Adding for maintenance @ 10% of cost
Taking salvage value after full use of material
@ 25% of cost
Wall form panel 1250x500mm
Qty taken for cost of using once = 16x0.85/40
= 0.34
Corner angle (1.5m long)
Qty taken for cost of using once = 4x0.85/40 =
0.085
100mm channel shoulders 2.5m long
Qty taken for cost of using once = 8x0.85/40 =
0.17
Double clip (bridge clip)
Qty taken for cost of using once = 16x0.85/40
= 0.34
Single clip
Qty taken for cost of using once = 8x0.85/40 =
0.17
MS tube 40mm - 4x2.7m = 10.8m
Qty taken for cost of using once =
10.8x0.85/40 =0.2295
Assembly nuts & bolts
Qty taken for cost of using once =
1040x0.85/40 = 22.10
Carriage
Labour:
Fitter Grade-I
Beldar
Shuttering oil
Sundries
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost for 10.8 sqm.
Cost per sqm.
Say
168
Quantity
Rate
Amount
each
0.34
980.00
333.20
each
0.085
280.00
23.80
each
0.17
1000.00
170.00
each
0.34
75.00
25.50
each
0.17
60.00
10.20
metrer
0.2295
225.00
51.64
L.S.
22.10
1.00
22.10
L.S.
78.00
1.00
78.00
Day
Day
L.S.
L.S.
0.75
1.50
52.00
26.00
151.50
135.25
1.00
1.00
113.62
202.88
52.00
26.00
1108.94
11.09
1120.03
168.00
1288.03
119.26
119.25
1198
1197
2204
0112
0114
9999
Description
Under 20cms wide
Consider a 3mx3m slab 15cms thick
12m edge Length
Assuming that the timber will become
unserviceable after being used 8 times.
(i) Planks 30mm thick (2nd class Kail wood or
equivalent local soft wood)
4x3x0.15x0.030=0.054cum
Wastage @5% = 0.003 cum.
Total = 0.057 cum 57 cudm
Qty taken for cost of using once = 57/8 =
7.125 cudm
(ii) Battens 75mmxl00mm (2nd class Kail
wood)
Horizontal 2x4x0.075x0.1x0.5=0.030
Horizontal 2x4x0.075x0.1 x 1.5=0.090
(iii) Vertical battens
16x0.15x0.075x0.030M=O.0054
(iv) Struts
16x0.25x0.075x0.075=0.0225
Total = 0.1479\"
Wastage @5% =0.0074
Total = 0.1553 cum= 155 cudm
Qty taken for cost ef using once = 155/8 =
19.375 cudm
Carriage of timber
Planks = 0.057 cum.
Battens = 0.155 cum.
Total = 0.212 cum.
Qty taken for cost of using once = 0.212/8 =
0.0265 cum
Labour:
For assembling erection dismantling &
cleaning.
Carpenter Ilnd class
Mazdoor (Male)
Sundries
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 12 metres
Cost of one meter
Say
169
Quantity
Rate
Amount
10 cudm
7.125
178.00
126.82
10 cudm
19.375
160.00
310.00
cum
0.0265
60.81
1.61
Day
Day
L.S.
0.81
0.54
5.20
141.60
135.25
1.00
114.70
73.04
5.20
631.37
6.31
637.68
95.65
733.33
61.11
61.10
1198
1197
2204
0112
0114
9999
Description
Above 20cm wide
Consider a 4mx4xslab 25cms thick 16 metre
edge length
Materials :
(i) Planks 38mm thick
4x4x0.25x0.038 = 0.152
Wastage @ 5% = 0.008
Total = 0.160 cum. = 160 cudm
Qty taken for cost of using once = 160/8 = 20 cudm
(ii) Battens
6x2x0.60x0.075x0.100=0.054
5x2x1.5x0.075x0.100=0.113
Total =0.167
Wastage @ 5% = 0.008
Total =0.175 cum. = 175 cudm
Qty taken for cost of using once = 175/8 =
21.88 cudm
Carriage of timber
Planks = 0.16 cum.
Battens = 0.175 cum.
Total = 0.335 cum.
Qty taken for cost of using once = 0.335/8 =
0.0419 cum
LabourFor assembling erection dismantling &
cleaning.
Carpenter Ilnd class
Mazdoor (Male)
Sundries
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 4 sqm.
Cost of 1 sqm.
Say
Description
Details of cost for 10m long moulding 10cm
projection,
20cm depth and 40cm girth
Area in contact 10x0.40 = 4.00 sqm.
Assuming that the timber will become
unserviceable after being used 8 times.
(I) Planking 30mm thick = 4sqm.
Extra & Wastage 20% = 0.8 sqm.
Total = 4.8 sqm.
4.8x0.038 = 0.182 cum = 182 cudm
170
Quantity
Rate
Amount
10 cudm
20.00
178.00
356.00
10 cudm
21.88
160.00
350.08
cum
0.0419
60.81
2.55
Day
Day
L.S.
1.00
0.75
6.50
141.60
135.25
1.00
141.60
101.44
6.50
958.17
9.58
967.75
145.16
1 112.91
278.23
278.25
Rate
Amount
Quantity
Code
1198
1197
2447
2204
0112
0114
9999
Description
Qty taken for cost using once = 182/8 = 22.75 10 cudm
cudm
(ii) Battens-Joining to Planking
1x10x0.1x0.075 = 0.075 cum.
From bottom shuttering
10xl.5x0.lx0.075 = 0.113 cum.
Wales
10x0.4mx0.1x0.075 = 0.030 cum.
Total = 0.218 cum = 218 cudm
Qty taken for cost using once = 218/8 = 27.25
cudm
(iii) Bailies 125 mm dia.
Slant 10x0.3 =3.00 m
ver. 6x3.5 = 21.00m
Total = 24.00 m
Wastage @ 5% = 1.20 m
Total = 25.20 m
Qty taken for cost using once = 25.2/8 = 3.15M
Carriage:
Planking = 0.188 cum.
Battens & Wales = 0.218 cum.
Bailies
25.2x22/7x(0.125)2/4 = 0.310 cum.
Total = 0.710 cum.
Qty taken for cost using once = 0.71/8=
0.0888 cum
Labour for assembling, erection, dismantling
& cleaning
Carpenter Ilnd class
Mazdoor (Male)
Sundries
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 4 sqm.
Cost of 1 sqm.
Say
Description
Details of cost for a bracket
1.20m projected
Front area 0.50x0.60m
End area 0.50x0.75m
Area in contact with concrete
2x{(0.60+0.75)/2x1.2}= 1.62 M2
Front 0.5x0.6 = 0.30 sqm.
Bottom 0.5x1.21 = 0.605 sqm.
Total = 2.525 sqm.
Materials:
Assuming that the timber will become
unserviceable after being used 8 times.
171
Unit
Quantity
22.75
Rate
178.00
Amount
404.95
10 cudm
27.25
160.00
436.00
metre
3.15
27.00
85.05
cum
0.0888
60.81
5.40
Day
Day
L.S.
0.63
0.63
6.50
141.60
135.25
1.00
89.21
85.21
6.50
1 112.32
11.12
1 123.44
168.52
1 291.96
322.99
323.00
Rate
Amount
Quantity
Code
1198
1197
2447
2204
0112
0114
9999
Description
Timber Ilnd class kail wood or equivalent
local soft wood
(I) Plank 30mm thick.
Sides 2{(0.60\"0.75)/2xl.238} = 1.6713 sqm
Battens 0.576x1.21 =0.697
Front 0.5x0.638 =0.319
Total = 2.687 sqm.
Cubical contents
2.687x0.038 =0.102 cum.
Wastage @ 5% = 0.005 cum.
Total =0.107 cum.
Qty taken for cost using once = 107/8 =
13.375 cudm
(ii) Battens-0.05x0.05
2x1.238 = 2.476m
2x1.21 = 2.42m
2x0.688 = 1.376m
2x0.838 = 1.676m
3x0.5
= 1.50m
Total
= 9.448m
Cubical contents
9.448x0.05x0.05 = 0.024 cum
Wastage 5% = 0.0012 cum.
Total = 0.0252 cum = 25.2 cudm
Qty taken for cost using once = 25.2/8 = 3.15 cudm
(iii) Bailies 125mm dia.
1x2.5 = 2.50m
1x2.65 = 2.65m
Total = 5.15 m
Wastage 5% = 0.26m
Total =5.41 m
Qty taken for cost using once = 5.41/8=
0.6763 m
Carriage:
Planks =0.107 cum.
Battens = 0.0252 cum
Bailies
5.41x22/7x(0.125) 2/4 = 0.066 cum
Total = 0.198 cum
Qty taken for cost using once = 0.198/8
0.0248 cudm
Labour for assembling, erection, dismantling
& cleaning
Carpenter Ilnd class
Mazdoor (Male)
Sundries
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 2.525 sqm.
Cost of 1 sqm.
Say
172
Unit
Quantity
Rate
Amount
10 cudm
13.375
178.00
238.08
10 cudm
3.15
160.00
50.40
metre
0.6763
27.00
18.26
cum
0.0248
60.81
1.51
Day
Day
L.S.
0.80
0.80
7.15
141.60
135.25
1.00
113.28
108.20
7.15
536.88
5.37
542.25
81.34
623.59
246.97
246.95
1198
1197
2447
2204
0 112
0114
9999
Description
Consider a weather shade over a window of
size
1.5mxl.2m
Size of weather shade 1.80x0.45m
Thickness at front = 0.05m
Thickness at fixed edge = 0.07m
Area in contact with concrete Bottom
1x0.45x1.80 = 0.810
1x0.05x1.80
= 0.094
2x0.45x0.06
= 0.027
Total = 0.954 sqm.
Materials :
Assuming that the timber will become
unserviceable after being used 8 times.
Ilnd class kail wood
(i) Planking 38mm thick.
Bottom 1x1.876x0.488 = 0.915 sqm.
1x1.876x0.05 =0.94 sqm.
2x0.45x0.06 = 0.027 sqm.
Total
=1.036 sqm.
Add 5% wastage = 0.052 sqm.
Total = 1.088 sqm.
Cubic contains
1.088x0.038 =0.041 cum = 41 cudm
Qty taken for cost using once = 41/8 = 5.125
cudm
(ii) Battens2x0.60x0.075x0.10 = 0.009
Ends with bearing center
1x0.45x0.075x0.10 = 0.003
Total = 0.012 cum = 12 cudm
Qty taken for cost using once =12/8=1.50
cudm
(iii) Bailies 125mm dia.
2x2.1 =4.2m
Wastage 5% = 0.21m
Total = 4.41 m
Qty taken for cost using once = 4.41/8 =
0.5513 m
Carriage:
Plank
= 0.041 cum.
Battens = 0.012 cum.
Bailies
4.41x22/7x(0.125) 2/4 = 0.054 cum.
Total = 0.107 cum
Qty taken for cost using once = 0.107/8 =
0.01338 cum
Labour for assembling, erection, dismantling
& cleaning
Carpenter II class
Mazdoor (Male)
Sundries
TOTAL
173
Quantity
Rate
Amount
10 cudm
5.125
178.00
91.22
10 cudm
1.50
160.00
24.00
metre
0.5513
27.00
14.89
cum
0.01338
60.81
0.81
Day
Day
L.S
0.30
0.25
5.20
141.60
135.25
1.00
42.48
33.81
5.20
212.41
Code
Description
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost for 0.954 sqm.
Cost of 1 sqm.
Say
8659
7342
7343
9999
9999
0116
0114
9999
9999
Description
Detail of cost for a room
4.50x3 = 13.50 sqm, height 3.5 m
Materials:
Adding for maintenance @ 10% of cost
Taking salvage value after full use of material
@ 25% of cost
1. Plates (size 0.75x0.60)
Angle 40x40x5mm
2x0.75= 1.50 m
2x0.60= 1.20 m
= 2.70m@3.00kg/m = 8.I kg
Weight of one plate =8.1 Okg
Add for wastage @ 5% = 0.41 kg
Total = 8.51kg
Total weight of all plates = 5x6x8.51 = 255.30 kg
Qty taken for cost using once.= 255.30x0.85/8
= 27.13kg
(X) Rate as per item no 10.1
Water proof ply 12mm thick.
1x4.50x3.00=13.50sqm Add wastage
5% =0.68sqm
Total 14.18sqm
Qty taken for cost using once 14.18/8 = 1.77sqm
2. Adjustable span- ESOSI (2.35-3.40m)
Qty taken for cost using once = 5x0.85/40
= 0.531
3. Adjustable telescope prop 3m(2.02-3.75m)
Qty taken for cost using once = 6xO.85/40
0.6375
4. Assembly nut & bolts etc.
Carriage
Labour:
Fitter grade-I
Beldar
Shuttering oil
Sundries
TOTAL
Add 1 % for water charges except on X
TOTAL
Add for contractors profit and overheads @
15% except onX
Cost for 13.50 sqm.
Cost per sqm.
Say
174
Unit
Quantity
Rate
Amount
2.12
214.53
32.18
246.71
258.61
258.60
Quantity
Rate
Amount
kg
sqm
27.13
1.77
42.15
572.00
1143.53 (X)
1012.44
each
0.1063
1 600.00
170.08
each
0.1275
1 000.00
127.50
L.S.
L.S.
12.63
130.00
1.00
1.00
12.63
130.00
Day
Day
L.S.
L.S.
3.00
6.00
78.00
52.00
151.50
135.25
1.00
1.00
454.50
811.50
78.00
52.00
3 992.18
28.49
4020.67
431.57
4 452.24
329.80
329.80
8659
7343
7344
9999
9999
0116
0114
9999
9999
Description
Consider a beam of 6 m clear span, 0.50 m
deep 0.30 m wide and height 3.5 m from floor
Cubical contents
6.60x0.5x0.3 = 0.99 cum
1x1.30x6.00 = 7.80 sqm
Materials :
Assuming shuttering will become
unserviceable after use of 8 times
Add maintenance charges @ 10% of cost of
material
Less salvage value of material after full use @
25% of cost of material
1. Steel plates for side and bottom (plate size
1.20 x 0.50m)
Angle 40x40x5mm
2x1.20 = 2.40 m
3x0.50= 1.50 m
3.90 m @ 3.00 kg/m = 11.70 kg
Weight of one plate = 11.70 kg.
Add for wastage = 0.585kg.
Total =12.285 kg.
Total weight of all plates
3x5x12.285 = 184.275 kg
Qty taken for cost of using once =
184.275*x0.85/8 =19.58 kg
Rate as per item no 10.1
Water proof ply 12mm thick, 1x1.30x6.00 =
sqm
7.80 sqm Add 5% wastage 0.39 sqm
Total 8.19 sqm
Qty taken for cost of using once
8.19/8 = sqm= 1.02 sgm
(ii) Props 3m (adjustable telescopic 2.023.75m)
Qty taken for cost of using once = 6 x0.85/40
=0.1275 m
(iii) Beam clamp 300-380 mm(450-1070mm)
Qty taken for cost of using once = 5x0.85/40
= 0.1063m
(iv) Assembly nut & bolts etc.
Carriage
Labour:
Fitter Grade-1
Beldar
Shuttering oil
Sundries, paper tape etc.
TOTAL
Add 1% for water charges except on X
TOTAL
Add for contractors profit and overheads @
15% except on X
Cost for 7.80 sqm.
Cost per sqm.
Say
175
Quantity
Rate
Amount
kg
19.58
1.02
42.15
572.00
825.30
583.44
each
0.1275
1000.00
127.50
each set
0.1063
375.00
39.86
L.S.
L.S.
11.05
78.00
1.00
1.00
11.05
78.00
Day
Day
L.S.
L.S.
1.25
2.50
39.00
26.00
151.50
135.25
1.00
1.00
189.38
338.12
39.00
26.00
2257.65
14.32
2271.97
217.00
2488.97
319.10
319.10
5.1
Providing and fixing tie bolt, spring coil and plastic cone in wal
as per the Engineer-in-charge
7320
7324
7325
9999
9999
5.1
Description
Details of cost for wall length 7.90mxlm (24
set)
Material:
Tie bolt 12mm dia & 100 mm length
Spring Coil 12mm dia.
Plastic cone 12mm dia.
Carriage:
Labour :
Sundries
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost for 24 sets
Cost of 1 each set
Say
Providing and fixing tie bolt, spring coil and plastic cone in wal
as per the direction of Engineer-in-charge
732
7324
7325
9999
Description
Details of cost for wall length 7.90mxlm (24
set)
Material:
Tie bolt 12mmjda& 150mm length
spring coil 12 mm dia
Plastic cone 12mm dia.
Carriage:
Labour:
Sundries
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost for 24 sets
Cost of 1 each set
Say
Providing and fixing tie bolt, spring coil and plastic cone in wal
as per the direction of Engineer-in-charge
5.10.3 20mmdia. & 150 mm length.
5.1
Code
7322
7324
7325
Description
Details of cost for wall length 7.90mxlm (24
set)
Material:
Tie bolt 20mm ida & 150mm length
Spring coil 12 mm dia
Plastic cone 12 mm dia
176
Unit
Quantity
Rate
Amount
each
each
each
L.S.
24.00
48.00
48.00
13.00
31.00
10.00
12.00
1.00
744.00
480.00
576.00
13.00
L.S.
26.00
1.00
26.00
1 839.00
18.39
1 857.39
278.61
2 136.00
89.00
89.00
Unit
Quantity
Rate
Amount
each
each
each
L.S.
24.00
48.00
48.00
13.00
42.00
10.00
12.00
1.00
1,008.00
480.00
576.00
13.00
L.S.
26.00
1.00
26.00
2,103.00
21.03
2,124.03
318.60
2,442.63
101.78
101.80
Unit
Quantity
Rate
Amount
each
each
each
24.00
48.00
48.00
57.00
10.00
12.00
1,368.00
480.00
576.00
Code
9999
9999
5.1
Description
Carriage:
Labour:
Sundries
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost for 24 sets
Cost of 1 each set
Say
Providing and fixing tie bolt, spring coil and plastic cone in wal
as per the direction of Engineer-in-charge
7323
7324
7325
9999
9999
Description
7345
7343
Description
Details of cost for a Room of size 6mx4.8m =
28.8 sqm. Material:
Assuming that shuttering material will become
unserviceable after use 40 times
Less salvage value of material after full use @
25% of cost material
Add 10% of cost of material for maintenance
1. Prop 4m
Qty taken for cost using once = 21 x0.85/40 =
0.4463
2. Prop 3m
Qty taken for cost using once = 21x0.85/40 =
Difference of rate between 4m prop and 3m
prop. 7x3
177
Unit
L.S.
Quantity
5.00
Rate
2.60
Amount
13.00
L.S.
10.00
2.60
26.00
2463.00
24.63
2487.63
373.14
2860.77
119.20
119.20
Unit
Quantity
Rate
Amount
each
each
each
L.S.
24.00
48.00
48.00
5.00
72.00
10.00
12.00
2.60
1728.00
576.00
576.00
13.00
L.S.
10.00
2.60
26.00
2 823.00
28.23
2 851.23
427.68
3 278.91
136.62
136.60
Quantity
Rate
Amount
each
0.4463
1030.00
459.69
each
0.4463
1000.00
446.30
Code
7330
7346
9999
0116
0114
9999
Description
2.Bracing
MS tube 40mm
7x4.8m = 33.60m
3x6.0m= 18.00m
Total = 51.60m
Qty taken for cost using once = 51.6x0.85/40 =
= 1.0965
3. Double coupler (40x40)
Qty taken for cost using once = 21 x0.85/40 =
0.4463
Carriage
Labour:
Fitter Grade-I
Beldar
Sundries
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost for 28.8 sqm.
Cost per sqm.
Say
5.12
Providing, hoisting and fixing upto floor five level precast rei
work in string courses, bands, copings, bed plates, anchor bl
sills and the like including the cost of required centring, shut
with 6 mm thick cement plaster 1:3 (1 cement: 3 fine sand) o
complete but excluding cost of reinforcement with 1:2:4 (1 ce
graded stone aggregate 20mm nominal size).
Code
Description
Details of cost for 1 cum. Materials :
(A) Cement concrete 1:2:4 in string or lacing
course etc(A) (Rate as per item no 4.5)
(NB : Rate has been taken including cost of
fixing in CM 1:2 as precast members are to be
fixed in CM 1:2)(1 cement: 2 coarse sand) as
per CPWD specifications
Labour:
Extra labour for laying CC in RCC work
(B) Beldar
(B) Bhishti
(B) Mason 1st class
(B) Mason 2nd class
(B) Mate
TOTAL
(C) Add for water charges @ 1 % on B
TOTAL
Add for contractors profit and overheads @
15% on B+C
Cost for 1 cum.
Say
0114
0101
0123
0124
0128
178
Unit
Quantity
Rate
Amount
meter
1.0965
1.0965
246.71
each
0.4463
45
20.08
L.S.
65.00
1.00
65.00
Day
Day
L.S.
3.00
6.00
130.00
151.50
135.25
1.00
454.50
811.50
130.00
2633.78
26.34
2660.12
399.02
3059.14
106.22
106.20
Quantity
Rate
Amount
cum
1 cum
4 814.35
4 814.35
Day
Day
Day
Day
Day
0.10
0.20
0.04
0.04
0.04
135.25
138.45
151.50
141.60
138.45
13.52 (B)
27.69 (B)
6.06 (B)
5.66 (B)
5.54 (B)
4872.82
0.58
4873.40
8.86
4882.26
4882.25
5.13
Code
Description
0114
0101
0123
0124
0128
5.14
Code
Description
Details of cost for
lmx0.20x0.15=0.03 cum
Cement concrete 1:2:4
(Rate as per item No. 4.2.3)
(A) Mortar and labour for hoisting and for fixing
Finishing
(Rate same as per item no. 13.24.1)
Centring and shuttering
(Rate same as per item no.4.3.1)
(A) Add for extra labour for hoisting 53.82x0.03
Add Extra labour for moulding :
(A) Mason 1st class 0.58x0.03
(A) Mason 2nd class 0.58x0.03
(A) Coolie 1.5x0.03
9999
9999
0123
0124
0115
179
Quantity
Rate
Amount
cum
sqm
0.054
0.60
3579.10
119.25
193.27
71.55
sqm
0.90
62.15
55.94
Day
Day
Day
Day
Day
0.005
0.01
0.002
0.002
0.002
135.25
138.45
151.50
141.60
38.45
0.68
1.38
0.30
0.28
0.28
323.68
0.03
323.71
0.44
324.15
6002.78
6002.80
Quantity
Rate
Amount
cum
L.S.
sqm
0.03
2.73
0.50
3579.10
1.00
62.15
107.37
2.73
31.08
sqm
0.36
119.25
42.93
L.S.
1.61
1.00
1.61
Day
Day
Day
0.0174
0.0174
0.05
151.50
141.60
135.25
2.64
2.46
6.09
Code
0101
0114
0101
0123
0124
0128
Description
(A) Bhishti 0.06x0.03
Extra labour for laying CC in RCC
(A) Beldar 0.1x0.03
(A) Bhishti 0.2x0.03
(A) Mason 1st class 0.04x0.03
(A) Mason 2nd class 0.04x0.03
(A) Mate 0.04x0.03
TOTAL
(B) Add for water charges @ 1 % on A
TOTAL
Add for contractors profit and overheads @
15% on C+D
Cost for 0.03 cum
Cost for 1 cum.
Say
5.15 : Providing, hoisting and fixing upto floor five level precast reinf
in lintels, beams and bressumers including setting in cement m
3 coarse sand), cost of required centring and shuttering and fin
6 mm thick cement plaster 1:3(1 cement: 3 fine sand) on expos
excluding the cost of reinforcement with 1:2:4 (1 cement: 2 coa
stone aggregate 20 mjn nominal size).
Code
0115
0114
0101
0123
0124
0128
9999
9999
Description
Details of cost for beam 6.60m long 0.50m
deep and 0.30m wide = 6.60x0.50x0.30 = 0.99 cum.
(A) Cement concrete 1:2:4
(Rate as per item No.4.1.3)
(Rate same as per item no. 13.16.1)
Finishing
(A) Centring and shuttering
(Rate same as per iterh no. 4.3.1)
Extra labour for lifting material upto floor V
level
(B) Coolie
LABOUR
Extra labour for layin cement concrete in RCC
work
(B) Beldar 0.10x0.99
(B) Bhishti 0.20x0.99
(B) Mason 1st class 0.04x0.99
(B) Mason 2nd class 0.04x0.99
(B) Mate 0.04x0.99
(B) Cement mortar 1:3 for fixing
(B) Labour for hoisting, Transporting and setting
in position
TOTAL
(C) Add for water charges @1% on B
TOTAL
Add for contractors profit and overheads @ 15%
Cost for 0.99 cum
Cost for 1 cum.
Say
180
Unit
Day
Quantity
0.0018
Rate
138.45
Amount
0.25
Day
0.003
0.006
0.0012
0.0012
0.0012
135.25
138.45
151.5
141.6
138.45
0.41
0.83
0.18
0.17
0.17
198.92
0.18
199.1
2.66
201.76
6725.33
6725.35
Quantity
Rate
Amount
cum
sqm
0.99
7.80
3 257.45
62.15
3 224.88
484.77
sqm
6.9
119.25
822.82
Day
1.11
135.25
150.13
Day
Day
Day
Day
Day
L.S.
L.S.
0.099
0.198
0.0396
0.0396
0.0396
89.70
269.10
135.25
138.45
1 51.50
141.6
138.45
1.00
1.00
13.39
27.41
6.00
5.61
5.48
89.70
269.10
5 099.29
5.67
5 104.96
85.87
5 190.83
5 243.26
5 243.25
5.16 : Providing, hoisting and fixing upto floor five level precast reinf
in shelves including setting in cement mortar 1:3 (1 cement : 3
required centring, shuttering and finishing with neat cement pu
surfaces but excluding the cost of reinforcement with 1:2:4 (1 c
sand : 4 graded stone aggregate 12.5mm nominal size).
Code
0115
0114
0101
0123
0124
0128
9999
9999
Description
Details of cost for one shelf
0.90x0.45x0.04m thick
= 0.90x0.45x0.04m = 0.0162 cum
Cement concrete 1:2:4
Rate as per Item No 4.1.3
Finisihing
(Rate same as per iem no. 13.18)
(A) Centring and shuttering:2x(0.90+0.45)x0.04 =
0.108 sqm
(Rate same as per item no. 4.3.1)
Extra labour for lifting material upto floor V
level
(B) Coolie
LABOUR
Extra labour for laying cement concrete in
RCC work due to delay etc.
(B) Beldar
(B) Bhishti
(B) Mason 1st class
(B) Mason 2nd class
(B) Mate
(B) Cement mortar 1:3 for fixing
(B) Labour for hoisting, Transporting and setting
in position
TOTAL
(C) Add for water charges @ 1 % on B
TOTAL
Add for contractors profit and overheads @
Cost for 0.0162 cum
Cost for 1 cum.
Say
5.17 : Providing, hoisting and fixing upto floor five level precast reinf
in vertical & horizontal fins individually or forming box louvers s
1:2 (1 cement : 2 coarse sand) including the cost of required ce
finishing smooth with 6mm thick cement plaster 1:3 (1 cement
surfaces complete but excluding the cost of reinforcement with
coarse sand : 4 graded stone aggregate 20 mm nominal size).
Code
Description
Details of cost for 4 RCC vertical fins 4m high
at lm centre to centre with two horizontal fins,
all projecting 60cm from face of wall and 5cm
thick cubical contents = 0.66 cum.
Material:
(A) Cement concrete l:2:4 (Rate as per item 4.1.3)
(A) Finishing
(Rate same as per item no. 4.3.1)
(A) Centering and shuttering
(Rate same as per item no. 4.3.1)
181
Quantity
Rate
Amount
cum
0.0162
3257.45
52.77
sqm
sqm
0.85
0.108
21.40
119.25
18.19
12.88
Day
0.018
135.25
2.43
Day
Day
Day
Day
Day
L.S.
L.S.
0.016
0.0032
0.0006
0.0006
0.0006
4.42
13.52
135.25
138.45
151.50
141.60
138.45
1.00
1.00
2.16
0.44
0.09
0.08
0.08
4.42
13.52
107.06
0.23
107.29
3.52
110.81
6 840.12
6 840.10
Quantity
Rate
Amount
cum
sqm
0.66
27.50
3 257.45
62.15
2 149.92
1 709.12
sqm
2.56
119.25
305.28
Code
0115
0114
0101
0123
0124
0128
9999
9999
9999
5.18 :
Description
Extra labour for lifting material upto floor V
level
(B) Coolie
LABOUR
Extra labour for laying cement concrete in
RCC work due to delay etc.
(B) Beldar
(B) Bhishti
(B) Mason 1st class
(B) Mason 2nd class
(B) Mate
(B) Cement mortar 1:2 for fixing
(B) Labour for hoisting, Transporting and setting
in position
(B) Sundries
TOTAL
Add for water charges @ 1 % on B
TOTAL
Add for contractors profit and overheads @
15% onBC
Cost for 0.66 cum
Cost for 1 cum.
Say
5.18.1 : 50 mm thick
Code
0768
9999
9999
0123
0124
0114
Description
Details of cost for jali
2.00mx0.75m = 1.50 sqm. of jali
Cost of jail
Mortar for fixing
Carriage and sundries
Labour (for fixing):
Mason 1st class
Mason 2nd class
Beldar
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 1.50 sqm.
Cost of 1 sqm.
Say
182
Unit
Quantity
Rate
Amount
Day
0.75
135.25
101.44
Day
Day
Day
Day
Day
L.S
L.S.
0.066
0.132
0.0264
0.0264
0.0264
17.94
71.76
135.25
138.45
151.50
141.60
138.45
1.00
1.00
8.93
18.28
4.00
3.74
3.66
17.94
71.76
L.S.
17.94
1.00
17.94
4 412.01
2.48
4 414.49
37.53
4 452.02
6 745.48
6 745.50
Unit
Quantity
Rate
Amount
sqm
L.S
L.S
1.50
6.24
6.20
145.00
1.00
1.00
217.50
6.24
6.20
Day
Day
Day
0.30
0.30
1.08
151.50
141.60
135.25
45.45
42.48
146.07
463.94
4.64
468.58
70.29
538.87
359.24
359.20
5.18 :
0769
9999
9999
0123
0124
0114
Description
Details of cost for 1.2mx0.60m = 0.75 sqm. of
jali.
Cost of jali
Mortar for fixing
Carriage and sundries
Labour (for fixing):
Mason 1st class
Mason 2nd class
Beldar
TOTAL
Add 1 % for water charges
TOTAL
Add 15%for contractors profit and overheads
Cost For 75sqm.
Cost of 1 sqm.
Say
25 mm thick
Description
Details of cost for jali 0.75mx0.5m = 0.375 sqm
Cost of jali
Mortar for fixing
Carriage and sundries
Labour (for fixing):
Mason lstclass
Mason 2nd class
Beldar
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 0.375 sqm
Cost of 1 sqm.
Say
183
Unit
Quantity
Rate
Amount
sqm
L.S.
L.S.
0.75
0.364
0.364
115.00
1.00
1.00
86.25
0.364
0.364
Day
Day
Day
0.12
0.12
0.50
151.50
141.60
135.25
18.18
16.99
67.62
196.32
1.96
198.28
29.74
228.02
304.03
304.05
Unit
Quantity
Rate
Amount
sqm
L.S
L.S
0.375
1.82
1.82
92.00
1.00
1.00
34.50
1.82
1.82
Day
Day
Day
0.06
0.06
0.25
151.50
141.60
135.25
9.09
8.50
33.81
89.54
0.90
90.44
13.57
104.01
277.36
277.35
5.19 : Encasing rolled steel sections, in beams and columns, with cem
(1 cement: 2 coarse sand : 4 graded stone aggregate 12.5mm n
centring and shuttering complete but excluding cost of reinforc
Code
0114
0101
0123
0124
0128
9999
Description
Details of cost for 0.424 cum.
Consider 2 R.S. Joist (150mmx80mm) 4.88m
long placed 30cm apart centre to centre
Overall dimensions of the beam 43cmx20cm(Rate as per item no. 4.16.1)
Materials:
Concrete work4.93x0.43x0.20 = 0.424 cum
For 1:2:4 Cement Concrete (1 cement: 2
coarse sand : 4 stone aggregate 20mm NS)
Rate as per item no. 4.1.3
Extra labour for laying C.C. in RCC work
(Rate as (B) in item No.512)
(A) Beldar
(A) Bhishti
(A) Mason 1st class
(A) Mason 2nd class
(A) Mate
Form work4.93x0.83 girth = 4.09 sqm.
(Rate as per item No . 5.9.5
(B) Sundries and for lifting materials
TOTAL
Add for water charges @ 1% on A+B
TOTAL
(C) Add for contractors profit and overheads @
15 % onA+B+C
Cost of 0.424 cum
Cost of 1 cum.
Say
0114
0101
0123
0124
0128
Description
Details of cost for the grillage
3.50mx3.50mxl.00m
Cement concrete 1:2:4
3.50mx3.50xl.00=12.25cumCement concrete 1:2:4
Rate as per item no. 4.1.3
Extra labour for laying C.C. in RCC work
(Rate as (B) in item 5.12)
Beldar
Bhishti
Mason 1st class
Mason 2nd class
Mate
Shuttering :
2(3.50+3.50)x1.00= 14.00 sqm.
(Rate as per item 5. 9.5)
TOTAL
184
Quantity
Rate
Amount
cum
0.424
3 257.45
1381.16
Day
Day
Day
Day
Day
0.10
0.20
0.04
0.04
0.04
135.25
138.45
151.50
141.60
138.45
15.52
27.69
6.06
5.66
5.54
sqm
4.09
162.65
665.24
L.S.
21.58
1.00
21.58
2126.45
0.80
2127.35
12.13
2139.48
5045.94
5045.95
Quantity
Rate
Amount
cum
12.25
3 257.45
39903.76
Day
Day
Day
Day
Day
0.10
0.20
0.04
0.04
0.04
135.25
138.45
151.50
141.60
138.45
13.52
27.69
6.66
5.66
5.54
sqm
14.00
162.65
2277.10
42239.33
Code
Description
(B) Add for water charges @ 1% on A
(A) TOTAL
Add for contractors profit and overheads @
15 % on A+B
Cost of 12.25 cum.
Cost of 1 cum.
Say
5.21 : Extra for providing and fixing expanded metal mesh of size 20x
3.25mm wide 1.6mm thick weighing 3.64 kg. per sqm. for encas
sections in beams, columns and grillages excluding cost of hang
Code
1015
9999
9999
0102
0114
Description
Deatail of cost for 10 sqm
Materials:
Expended metal 20 mm x 60 mm and 1.6 mm
thick = 10 sqm
wastage 5 % = 0.50 sqm
Total =10.50 sqm
Carriage of expended metal
Wire for tieing
Cost of bending and placing in position
Blacksmith 1st class
Beldar
TOTAL
Add for water charges @ 1 %
TOTAL
Add for contractors profit and overheads
15%
Cost of 10 sqm
Cost of 1 sqm.
Say
1004
2205
9999
0102
0114
9999
Description
Details of cost for 1 quintalMaterials:
Mild steel bars = 1.00 q
Add 5% wastage = 0.05
Total = 1.05 q
Carriage of steel 1.05/10 = 0.105t
Cover block
26.00
Labour:
For straightening, cutting, bending, binding
and placing in positionBlacksmith 1st class
Beldar
Sundries and binding wire
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of one quintal
Cost of 1 Kg.
Say
185
Unit
Quantity
Rate
Amount
0.58
42239.91
8.86
42248.77
3448.88
3448.90
Quantity
Rate
Amount
sqm
L.S
L.S
10.50
13.52
13.52
200.00
1.00
1.00
2100.00
13.52
13.52
Day
Day
0.25
0.25
151.50
135.25
37.88
33.81
2198.73
21.99
2220.72
333.11
2553.83
255.38
255.40
Unit
Quantity
Rate
Amount
quintal
tonne
L.S.
1.05
0.105
26.00
3075.00
47.29
1.00
3 228.75
4.97
26.00
Day
Day
L.S.
1.00
1.00
26.91
151.50
135.25
1.00
151.50
135.25
26.91
3573.38
35.73
3609.11
541.37
4150.48
41.50
41.50
1224
2205
0102
0114
9999
Description
1005
2205
9999
0102
0114
9999
Description
186
Unit
Quantity
Rate
Amount
quintal
tonne
1.05
0.105
3100.00
47.29
3255.00
4.97
Day
Day
L.S.
1.00
1.00
26.91
151.50
135.25
1.00
151.50
135.25
26.91
3573.63
35.74
3609.37
541.41
4150.78
41.50
41.50
Unit
Quantity
Rate
Amount
quintal
tonne
L.S.
1.05
0.11
26.00
3175.00
47.29
1.00
3333.75
4.97
26.00
Day
Day
L.S.
1.00
1.00
26.91
151.50
135.25
1.00
151.50
135.25
26.91
3678.38
36.78
3715.16
557.27
4272.43
42.72
42.70
1005
2205
9999
0102
0114
9999
Description
1021
2205
9999
0103
0114
9999
Description
Details of cost for 1 quintalMaterials:
Hard drawn steel wire fabric 100kg/7.75kg
= 12.903 sqm., wastage 5 % = 0.64 sqm
Total =13.548 sqm.
Carriage 1.05q = 0.105 tonne
Cover block
Labour:
For cutting and laying in position.
Blacksmith 2nd class
Beldar
Sundries and binding wire
TOTAL
Add 1% for water charges
TOTAL
Add 15 % for contractors profit and overheads
Cost of one quintal
Cost of 1 Kg.
Say
187
Unit
Quantity
Rate
Amount
quintal
tonne
L.S.
1.05
0.105
26.00
3175.00
47.29
1.00
3 333.75
4.97
26.00
Day
Day
L.S.
1.00
1.00
26.91
151.50
135.25
1.00
151.50
135.25
26.91
3678.38
36.78
3715.16
557.27
4272.43
42.72
42.70
Unit
Quantity
Rate
Amount
sqm
tonne
L.S.
13.55
0.105
26.00
310.00
47.29
1.00
4199.88
4.97
26.00
Day
Day
L.S.
0.20
1.50
13.52
141.60
135.25
1.00
28.32
202.88
13.52
4475.57
44.76
4520.33
678.05
5198.38
51.98
52.00
188
1005
2205
9999
0102
0114
9999
5.23 : Deduct for omitting in R.C.C. work smooth finishing of the expo
6mm thick cement mortar 1:3 (1 Cement: 3 fine sand)
Code Description
Details of cost for lOsqm.
Materials:
Cement mortar 1:3 (cement:3 finesand)
(Rate as per items No. 3.3)
Mason
0155
Coolie
0115
Bhisti
0101
Extra for removing burrs, cleaning with wire
9999
brushes pock marking with pointed tool etc.
complete
Scaffolding and Sundries
9999
TOTAL
Add 1 % for water charges
TOTAL
Add ld^& for contractors profit and overheads
Cost of 10 Sqm.
Cost per sqm.
Say
Unit
Quantity
Rate
Amount
quintal
tonne
L.S.
1.05
0.105
26.00
3 175.00
47.29
1.00
3 333.75
4.97
26.00
Day
Day
L.S
1.00
1.00
26.91
151.50
135.25
1.00
151.50
135.25
26.91
3 678.38
36.78
3 715.16
557.27
4 272.43
42.72
42.70
Quantity
Rate
Amount
cum
0.072
2870.00
206.64
Day
Day
Day
L.S.
0.51
0.75
0.92
13.39
146.55
135.25
138.45
1.00
74.74
101.44
127.37
13.39
L.S.
11.70
1.00
11.70
535.28
5.35
540.63
81.09
621.72
62.17
62.15
5.24 : Extra for rendering smooth the top of suspended floors, landin
and risers) with cement mortar 1:2 (1 cement: 2 coarse sand) in
of neat cement and protecting the surface with a layer of 7.5 cm
mm of fine sand in case of suspended floor and bricks laid in m
landings and steps including subsequent removal and cleaning
Code
0367
2209
0123
0124
0114
9999
0983
2261
9999
9999
Description
Details of cost for 10 sqm.
Materials:
Cement mortar 1:2 (1 Cement: 2 Coarse sand)
(Rate as per item No. 3.2
finishing (Floating coat) cement
Carriage of cement
Labour:
Mason I class
Mason II class
Beldar
Spreading earth on floor (7.5mm thick)
Spreading sand 15mm thick on floor
Fine sand
Carriage of sand
Labour:
Disposal of earth spread over floor protectiron
Sundries
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 10 Sqm.
Cost per sqm.
Say
5.25 : Providing and fixing in position copper plate as per design for e
Code
Description
189
Quantity
Rate
Amount
cum
0.03
3 864.25
115.93
tonne
tonne
0.0213
0.0213
4500.00
47.29
95.85
1.01
Day
Day
Day
L.S.
0.20
0.20
0.25
35.49
151.50
141.60
135.25
1.00
30.30
28.32
33.81
35.49
cum
cum
0.15
0.15
320.00
53.21
48.00
7.98
L.S.
L.S.
5.33
6.24
1.00
1.00
5.33
6.24
408.26
4.08
412.34
61.85
474.19
47.42
47.40
Quantity
Rate
Amount
kg
10.56
195.00
2059.20
Day
L.S
0.25
6.24
141.60
1.00
35.40
6.24
2100.84
21.01
2121.85
318.28
2440.13
231.07
231.05
0313
2211
0370
2200
0123
0124
0114
9999
Description
Details of cost for a joint - 2.5cm wide 15cm
deep and 300m in lengthCubical content of joint300x0.025x0.150=1.125cum. **
Material :Bitumen 85/25 @ 1050kg per cum.
1.25x1050kg = 1181.25kg
Add wastage @ 5% = 59.06 kg.
= 1240.31 kg = 1.2401
Carriage of bitumen
Steam coal for heating of bitumen @ 2.0
quintal per tonne of bitumen.
1.240x2.0=2.48q=0.248t
Carriage of steam coal
Labour for heating, mixing and fillingMason 1 st class
Mason 2nd class
Beldar
Sundries
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 300m length 2.5cm wide and 15cm
depth
Cost per cm. depth, per cm width per 100m
length
Say
Description
Details of cost for a joint - 2.5cm wide 15cm
deep and 300m in length
-Cubical content of joints300x0.150x0.025= 1.125cum.
Materials
Bitumen S-90 = 256.30 kg per cum.
256.30xl.125 = 288.34 kg.
Add for wastage @ 5% = 14.42 kg.
= 302.76 kg. or =
0309
2211
0370
2200
0367
2209
0982
Bitumen
Carriage of bitumen
Stem coal for heating of bitumen @ 2.0
quintal per tonne of bitumen, i.e.
0.303x2.0=0.606q
Carriage of steam coal
Cement:
1/80x228.34=3.6 kg = 0.0036 Tonne
Carriage of cement
Coarse sand l/4th of the quantity of cement in
0.3031 tonne.
190
Quantity
Rate
Amount
tonne
tonne
quintal
1.24
1.246
2.48
25 000.00
53.21
300.00
31 000.00
5.98
744.00
tonne
0.248
60.81
15.08
Day
Day
Day
L.S.
2.52
2.52
8.06
121.16
151.50
141.60
135.25
1.00
381.78
356.83
1 090.12
121.16
33 774.95
337.75
34 112.70
5 116.90
39 229.60
348.71
348.70
Quantity
Rate
Amount
tonne
tonne
quintal
0.303
0.303
0.606
22500.00
53.21
300.00
6 817.50
16.12
181.80
tonne
0.061
60.81
3.71
tonne
tonne
cum
0.0036
0.0036
0.90
500.00
47.29
600.00
16.20
0.17
540.00
Description
Code
2203
0123
0124
0114
9999
5.28 :
Code
Description
Details of cost for joint 100m long 10cm deep
and 12mm thick
Material:
(i) Impregnated fibre board
lxl00x0.075=7.5sqm.
(ii) Primere 80m/litter 100m=100/80 x1=1.25 lit
(iii) Sealing compound @ 3 per litrer for
100m = 100/3x1 =33.3 litres+Wastage @ 5% =
1.67 = 35.00 litre (1 litre = 0.9 Kg) =
35.00x0.9 = 31.5 Kg.
Carriage
Labour:
Mason 1 st class
Mason 2nd class
Beldar
Sundries
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 100m long 10cm deep
Cost per cm depth per 100m
Say
0339
0316
0314
9999
0123
0124
0114
9999
5.29
0236
Description
Details of cost for 3 m length
Materials:
Non - Asbestos multi purpose fibre cement
board 6mm thick.
191
Unit
Quantity
Rate
Amount
cum
0.90
53.21
47.89
Day
Day
Day
L.S
2.52
2.52
8.06
121.16
151.50
141.60
135.25
1.00
381.78
356.83
1090.12
121.16
9573.28
95.73
9669.01
1450.35
11119.36
98.84
98.85
Quantity
Rate
Amount
sqm
7.50
279.00
2092.50
Ltrs.
1.25
28.00
35.00
Kg
31.50
20.00
630.00
L.S.
26.91
1.00
26.91
Day
Day
Day
L.S.
0.12
0.12
0.25
26.91
151.50
141.60
135.25
1.00
18.18
16.99
33.81
26.91
2880.30
28.80
2909.10
436.36
3345.46
334.55
334.55
Quantity
Rate
Amount
sqm
0.47
180.00
84.60
Code
2273
9999
0112
0114
5.29 :
Description
Carriage of sheets- 0.45sqm = 0.0049 tonne
50mm iron screws with washer and rawl plugs
Labour:
Carpenter 2nd class
Beldar
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost for 3 m
Cost per meter
Say
0236
2273
9999
0112
0114
5.29 :
5.29.2 :
Description
Details of cost for 3m length
Materials:
Non - Asbestos multi purpose fibre cement
board 6mm thick.
Carriage of sheet 0.60sqm. = 0.0065 tonne
50mm iron screws with washer and rawl plugs
Labour:
Carpenter 2nd class
Beldar
TOTAL
Add 1 % for water charges
TOTAL
Add lfei for contractors profit and overheads
Cost for 3m
Cost per meter
Say
2391
Description
Details of cost for 1 meter
Materials:
3.15mm thick aluminium fluted
strips-1 m x 15cm wide
192
Unit
tonne
L.S.
Quantity
0.0049
40.30
Rate
47.29
1.00
Amount
0.23
40.30
Day
Day
0.20
0.20
141.60
135.25
28.32
27.05
180.50
1.80
182.30
27.34
209.64
69.88
69.90
Quantity
Rate
Amount
sqm
0.63
180.00
113.40
tonne
0.0065
47.29
0.31
L.S.
53.82
1.00
53.82
Day
Day
0.27
0.27
141.60
135.25
38.23
36.52
242.28
2.42
244.70
36.70
281.40
93.80
93.80
Unit
Quantity
Rate
Amount
metre
1.00
216.00
216.00
Code
0639
9999
0112
0114
9999
Description
Iron screws 25mm
Carriage of materials
Labour:
Carpenter 2nd class
Beldar
Sundries
TOTAL
Add 1% for water charges
TOTAL
Add 10% for contractors profit and overheads
Cost for 1 metre
Say
5.29 :
2392
0639
9999
0112
0 114
9999
Description
5.30 :
Code
Description
Details of cost for 30 metre long throating or
plaster or mouldingLabour :
Mason 1st class
Mason 2nd class
Coolie
Add for materials (cement mortar etc.)
TOTAL
Add 1 % for water charges
0123
0124
0115
9999
193
Unit
100Nos
L.S.
Quantity
6.00
1.04
Rate
15.00
1.00
Amount
0.90
1.04
Day
Day
L.S.
0.07
0.07
1.82
141.60
135.25
1.00
9.49
9.06
1.82
238.31
2.38
240.69
36.10
276.79
276.80
Unit
Quantity
Rate
Amount
Metre
1.00
288.00
288.00
100Nos
L.S.
6 Nos
1.30
15.00
1.00
0.90
1.30
Day
Day
L.S.
0.089
0.089
2.34
141.60
135.25
1.00
12.60
12.04
2.34
317.18
3.17
320.35
48.05
368.40
368.40
Quantity
Rate
Amount
Day
Day
Day
L.S.
0.50
0.50
1.00
26.91
151.50
141.60
135.25
1.00
75.75
70.80
135.25
26.91
308.71
3.09
Code
Description
TOTAL
Add 15% for contractors profit and overheads
Cost for 30 metre
Cost per meter
Say
0011
0114
Description
Analysis Same As As Per Item No 4.15
Details of cost for depth of water 0.30m.
Quantity of concrete = 14 cum.
pumping hours = 3 hrs. or 0.375 day.
Cost of pumping water with
3636.7 litres per hour capacity pump
Beldar for cleaning slush
TOTAL
Add 1 % for water charges
TOTAL
Add for contractors profit and overheads @
15%
Cost of 14cum. per 0.30m depth
Cost of cum. per m depth
Say
5.32 Extra for laying reinforced cement concretein orunder foul posi
Code
0123
0124
0114
0115
Description
Analysis Same As Item No 4.16
Details of cost for 1 cum.
Extra labour due to slow progressMason 1 st class
Mason 2nd class
Beldar
Coolie
TOTAL
Add 1% for water charges
TOTAL
Add for contractors profit and overheads @
15%
Cost for 1 cum.
Say
0295
Description
Details of cost for 1.00 cum
Materials.
Stone Aggregate 20 mm .
194
Unit
Quantity
Rate
Amount
311.80
46.77
358.57
11.95
11.95
Quantity
Rate
Amount
Day
0.375
300.00
112.50
Day
4.00
135.25
541.00
653.50
6.54
660.04
99.01
759.05
180.73
180.75
Quantity
Rate
Amount
Day
Day
Day
Day
0.02
0.02
0.25
0.15
151.50
141.60
135.25
135.25
3.03
2.83
33.81
20.29
59.96
0.60
60.56
9.08
69.64
69.65
Unit
Quantity
Rate
Amount
cum
0.57
700.00
399.00
Code
0297
2202
0982
2203
0367
2209
7318
0004
0009
0155
0114
0101
0012
9999
Description
Stone aggregate 10mm
Carriage of aggregate .
Coarse sand
Carriage of Coarse sand
Cement
Carriage of Cement
Plasticizer 0.50% of cement
Production cost, pumping to respective
floors and laying in position
Production cost of concrete by batch mix
plant.
Pumping charges of concrete.
Labour for pouring, consolidating & curing
Mason
Beldar
Bhisti
Vibrator
Sundries
Total
Add 1% for water charges.
Total
Add 15% for contractors profit and
overheads.
Cost per 1.00 cum
Say
5.34 :
Add or deduct for providing richer or leaner mixes respectiv
5.34.1 : Providing M-30 grade concrete by using 420kg of Cement per
instead of M-25 grade B.M.C./Rmc.
Code
0367
2209
7318
Description
Details of cost for 1 cum.
Cement for M-30 mix = 0.420 t
Cement for M-25 mix = 0.410 t
Difference 0.010t
Carnage of Cement
Plasticizer for M-30 mix = 2.10 Kg
Plasticizer for M-25 mix = 2.05 Kg
Diffevence =0.05 kg.
Plasticizer / super plasticizer
TOTAL
Add 1 % for water charges
TOTAL
Add for contractors profit and overheads
15%
Cost per cum.
Say
Description
Details of cost for 1 cum.
Cement for M-35 mix = 0.428 t
Cement for M-25 mix = 0.410 t
195
Unit
cum
cum
cum
cum
tonne
tonne
kilogram
Quantity
0.28
0.85
0.425
0.425
0.41
0.41
2.05
Rate
700.00
53.21
600.00
53.21
4 500.00
47.29
30.00
Amount
196.00
45.23
255.00
22.61
1 845.00
19.39
61.50
cum
1.00
200.00
200.00
cum
1.00
80.00
80.00
Day
Day
Day
Day
L.S.
0.17
2.00
0.90
0.07
13.00
146.55
135.25
138.45
200.00
1.00
24.91
270.50
124.60
14.00
13.00
3570.74
35.71
3606.45
540.97
4147.42
4147.40
Quantity
Rate
Amount
tonne
tonne
0.01
0.01
4500.00
47.29
45.00
0.47
kilogram
0.05
30.00
1.50
46.97
0.47
47.44
7.12
54.56
54.55
Quantity
Rate
Amount
Code
0367
9999
7318
Description
Difference 0.01 t
Carriage of cement
Plasticizer for M-35 mix = 2.140 Kg
Plasticizer for M-25mix = 2.05 Kg
Diffevence =0.09 kg.
Plasticizer / super plasticizer
TOTAL
Add 1 % for water charges
TOTAL
Add for contractors profit and overheads @
15%
Cost per cum.
Say
0367
2209
7318
Discription
Details of cost for 1 cum.
Cement for M-40 mix = 0.435 t
Cement for M-25 mix = 0.410 t
Difference = 0.025 t
Carriage of cement
Plasticizer for M-40 mix = 2.175 Kg
Plasticizer for M-25 mix = 0.125 Kg
Difference
=0.125kg.
Plasticizer / super plasticizer
TOTAL
Add 1 % for water charges
TOTAL
Add for contractors profit and overheads
15%
Cost per cum.
Say
5.35
Code
0367
2209
Discription
Cement
Carriage of cement
Add 1% for water charges
Add for contrator profit & overheads @ 15%
Cost for 1 Quintal
196
Unit
Quantity
Rate
Amount
tonne
tonne
0.018
0.018
4500.00
27.29
81.00
0.85
kilogram
0.09
30.00
2.70
84.55
0.85
85.40
12.81
98.21
98.20
Quantity
Rate
Amount
tonne
tonne
0.025
0.025
4500.00
47.29
112.50
1.18
kilogram
0.125
30.00
3.75
117.43
1.17
118.60
17.79
136.39
136.40
Unit
M.T
M.T
Quantity
0.100
0.100
Rate
4500.00
47.29
Amount
450.00
4.73
454.73
4.55
459.28
68.89
528.17
528.15
5.36
Code
Discription
Details for wafle 09. x 0.9 x 0.3m
Total area covered 4.548 x 3.636 = 16.54 sqm.
Cement concrete in 1unit
Top 0.8 x 0.8 x 0.035 = 0.0224
sides 2(0.8 x 0.265 x 0.0325) = 0.0138
2(0.735 x 0.265 x 0.0325)
= 0.0127
Total = 0.0489
Flange 4 x 0.85 x 0.05 x 0.035 = 0.0060
Total = 0.0549
Add for Fillets 25% = 0.0137
Total = 0.069 cum.
Quantity for 20 such units = 1.38 cum
Rate as per item no. 5.2.2 of SH : RCC
(i)
(B)
197
Quantity
Rate
cum
1.38
4092.35
sqm
45.86
119.25
kg
9.00
46.35
L.S
L.S
13.00
79.95
1.00
1.00
Day
Day
1.00
6.00
151.50
135.25
sqm
16.54
36.45
g and centring
0.265 = 0.848
0.735 x 0.265 = 0.779
de) 1 x 0.735 x 0.735 = 0.540
x 0.9 x 0.035 = 0.126
er m 9.12 kg or 0.009 t
per item no 10.2 of sH: Steel work
hers 2 x 2 = 4Nos.
carriage of bolts
water charges @ 1% on A
Amount
5647.44
5468.80
417.15
13.00
79.95
151.50
811.50
602.88
13192.22
10.56
13202.78
159.98
13362.76
9683.16
9683.15
5.37
Code
0295
0297
2202
0982
2203
0367
2209
7318
0004
0029
0009
0155
0114
0101
0012
9999
198
Providing and laying in position ready mixed concrete manufacture
automatic batching plant and transported to site of work in transit
upto 10kms having continuous agitated mixer, manufactured as per
specified grade for reinforced cement concrete work including pum
from transit mixer to site of laying , excluding the cost of centering
finishing and reinforcement including cost of admixtures in recom
proportions as per IS : 9103 to accelerate/ retard setting of concret
workability without impairing strength and durability as per directi
- in - charge. M-25 grade Reinforced cement concrete by using 410k
cum of concrete. All works upto floor V level.
Description
Details of cost for 1.00 cum
Materials.
Stone aggregate 20 mm
Stone aggregate 10 mm
Carriage of aggregate
Coarse sand
Carriage of Coarse sand
Cement
Carriage of Cement
Plasticizer 0.80% of cement
Production cost, carriage to site, pumping to
respective floors and laying in position
Production cost
Carriage of concrete by transit mixer.
Pumping charges of concrete including Hire
charges of pump, pipig work & accessories etc.
Labour for pouring, consolidating & curing
Mason
Beldar
Bhisti
Vibrator
Sundries
Total
Add 1% for water charges.
Total
Add 15% for contractors profit and
overheads.
Cost per 1.00 cum
Say
Unit
cum
cum
cum
cum
cum
tonne
tonne
kilogram
cum km/
cum
cum
Day
Day
Day
Day
L.S
5.38
Extra for R.C.C./ B.M.C/ R.M.C. work above floor V level for each fou
thereof.
Code
Description
Cost for 1 cum
Materials
Pumping charges of concrete including Hire
charges of pump, piping work & accessories etc.
Total
Add 1% for water charges.
Total
Add 15% for contractors profit and overheads.
Cost for 1 cum
Say
0009
5.39
Code
0029
Unit
cum
Unit
cum/km
Total
Add 1% water charges
Total
Add 15% for contractor profit and overheads.
Cost for 1 cum per km.
Say
0.57
0.28
0.85
0.425
0.425
0.41
0.41
2.05
10.00
10.00
1.00
0.17
2.00
0.90
0.07
13.00
Rate
Amount
700.00
700.00
53.21
600.00
53.21
4500.00
47.29
30.00
399.00
196.00
45.23
225.00
22.61
1845.00
19.39
61.50
200.00
18.00
80.00
200.00
180.00
80.00
146.55
135.25
138.45
200.00
24.91
270.50
124.60
14.00
1.00
3750.74
37.51
3788.25
568.24
4356.49
4356.50
1.00
Rate
Amount
80.00
80.00
80.00
0.80
80.80
12.12
92.92
92.90
Rate
Amount
18.00
18.00
18.00
0.18
18.18
2.73
20.91
20.90
199
SUB HEAD :
BRICK WO
UB HEAD : 6.0
RICK WORK
6.1
6.1.1
Code
Description
Details of cost for 1 cum.
MATERIALS :
Bricks of class designation 75
Cement mortar 1:4 (Rate as per item No. 3.9)
Carriage of bricks
Sundries
LABOUR:
Mason 1st Class
Mason Ilnd Class
Coolie
Bhishti
TOTAL
Add 1% for water charges
TOTAL
Add for contractors profit and overheads @
15%
Cost of 1 Cum.
Say
2602
2201
9999
0123
0124
0115
0101
6.1
6.1.2
Code
2602
2201
9999
0123
0124
0115
0101
6.2
6.2.1
Code
7900
2201
201
Quantity
Rate
Amount
1000 Nos
cum
1000 Nos
L.S.
494.00
0.25
494.00
2.73
1 900.00
2 578.45
141.88
1.00
938.60
644.61
70.09
2.73
Day
Day
Day
Day
Day
L.S.
0.36
0.36
1.37
0.20
151.50
141.60
135.25
138.45
54.54
50.98
185.29
27.69
1974.53
19.75
1994.28
299.14
2293.42
2293.40
Quantity
Rate
Amount
1000 Nos
cum
1000 Nos
L.S.
4.94
0.25
4.94
2.73
1 900.00
1 987.30
141.88
1.00
938.60
496.82
70.09
2.73
Day
Day
Day
Day
0.36
0.36
1.37
0.20
151.50
141.60
135.25
138.45
54.54
50.98
185.29
27.69
1826.74
18.27
1845.01
276.75
2121.76
2121.75
Quantity
Rate
Amount
1000 Nos
1000 Nos
cum
487.00
487.00
0.22
2 050.00
141.88
2 578.45
998.35
69.10
567.26
Code
9999
0123
0124
0115
0101
Description
Sundries
LABOUR:
Mason 1st Class
Mason Ilnd Class
Coolie
Bhishti
TOTAL
Add 1% for water charges
TOTAL
Add for contractors profit and overheads @
15%
Cost of 1 Cum.
Say
7900
2201
9999
0123
0124
0115
0101
6.3
6.3.1
Code
7901
2201
9999
Description
Details of cost for 1 cum.
MATERIALS :
Modular bricks of class designation 75
Carriage of Bricks
Cement mortar 1 :6 (1 cement : 6 coarse sand)
(Rates as per item no. 3.11)
Sundries
LABOUR:
Mason 1st Class
Mason Ilnd Class
Coolie
Bhishti
TOTAL
Add 1% for water charges
TOTAL
Add for contractors profit and overheads @
15%
Cost of 1 Cum.
Say
Description
Details of cost for 1 cum.
MATERIALS :
Machine moulded perforated FPS bricks of
class designation 125
Carriage of Bricks
Cement mortar 1:6(1 cement: 6 coarse sand).
(Rates as per item no. 3.11)
Sundries
LABOUR:
202
Unit
L.S.
Quantity
2.73
Rate
1.00
Amount
2.73
Day
Day
Day
Day
0.33
0.33
1.00
0.18
151.50
141.60
135.25
138.45
50.00
46.73
135.25
24.92
1894.34
18.94
1913.28
286.99
2200.27
2200.25
Quantity
Rate
Amount
1000 Nos
1000 Nos
cum
487.00
487.00
0.22
2 050.00
141.88
1987.30
998.35
69.10
437.21
L.S.
2.73
1.00
2.73
Day
Day
Day
Day
0.33
0.33
1.00
0.18
151.50
141.60
135.25
138.45
50.00
46.73
135.25
24.92
1764.29
17.64
1781.93
267.29
2049.22
2049.20
Quantity
Rate
Amount
1000 Nos
494.00
3 233.00
1 597.10
1000 Nos
Cum
494.00
0.25
141.88
1 987.30
70.09
496.82
L.S
2.73
1.00
2.73
Code
0123
0124
0115
0101
9999
0115
6.3
6.3.2
Code
7902
2201
9999
0123
0124
0115
0101
9999
0115
Description
Mason 1st Class
Mason Ilnd Class
Coolie
Bhishti
Scaffolding
Extra labour element required for lifting of
materials (above floor two level upto floor
five level)
Coolie
TOTAL
Add 1 % for water charges
TOTAL
Add for contractors profit and overheads @
15%
Cost of 1 Cum. Say
Say
Description
Details of cost for 1 cum.
MATERIALS :
Machine moulded perforated FPS bricks of
class designation 125
Carriage of Bricks
Cement mortar 1:6(1 cement: 6 coarse sand).
(Rates as per item no. 3.11)
Sundries
LABOUR:
Mason 1st Class
Mason Ilnd Class
Coolie
Bhishti
Scaffolding
Extra labour element required for lifting of
materials (above floor two level upto floor
five level)
Coolie
TOTAL
Add 1 % for water charges
TOTAL
Add for contractors profit and overheads @
15%
Cost of 1 Cum. Say
Say
203
Unit
Quantity
Rate
Amount
Day
Day
Day
Day
L.S
0.47
0.47
1.80
0.20
22.36
151.50
141.60
135.25
138.45
1.00
71.20
66.55
243.45
27.69
22.36
Day
1.13
135.25
152.83
2750.82
27.51
2778.33
416.75
3195.08
3195.10
rforated bricks of class designation 125 conucture above plinth level upto floor five level in
e sand):
Unit
Quantity
Rate
Amount
1000 Nos
487.00
3 200.00
1 558.40
1000 Nos
Cum
487.00
0.22
141.88
1 987.30
69.10
437.21
L.S
2.73
1.00
2.73
Day
Day
Day
Day
L.S
0.44
0.44
1.43
0.18
16.38
151.50
141.60
135.25
138.45
1.00
66.66
62.30
193.41
24.92
16.38
Day
1.13
135.25
152.83
2583.94
25.84
2609.78
391.47
3001.25
3001.25
6.4
6.4.1
Code
2602
2201
0123
0124
0115
0101
9999
0115
6.4
6.4.2
Code
2602
2201
0123
0124
0115
0101
9999
0115
204
Quantity
Rate
Amount
1000
Nos
Cum
1000
Nos
L.S
494.00
1900.00
938.60
0.25
494.00
2578.45
141.88
644.61
70.09
2.73
1.00
2.73
Day
Day
Day
Day
L.S
0.47
0.47
1.80
0.20
22.36
151.50
141.60
135.25
138.45
1.00
71.21
66.55
243.45
27.69
22.36
Day
1.13
135.25
152.83
2240.12
22.40
2262.52
339.83
2601.90
2601.90
Quantity
Rate
Amount
Nos
Cum
1000 Nos
L.S
494.00
0.25
494.00
2.73
1900.00
1987.30
141.88
1.00
938.60
496.02
70.09
2.73
Day
Day
Day
Day
L.S
0.47
0.47
1.80
0.20
22.36
151.50
141.60
135.25
138.45
1.00
71.21
66.55
243.45
27.69
22.36
Day
1.13
135.25
152.83
2092.63
20.93
2113.56
317.03
2463.59
2463.60
6.5
Code
Description
0037
1235
6.6
Extra for forming cavity 5cm to 7.5cm wide in cavity walls wit
vent holes including use of cores and cost of providing and fix
M .S. ties 300mm long of 25x3mm section at not less than 3 t
approved design.
Code
Description
1008
9999
2205
0123
0124
0114
9999
6.7
Code
Description
Details of cost for 10m length
Materials :
Half brick masonry 1:3 (Average)
1x10x0.27 = 2.7
205
Quantity
Rate
Amount
per day
0.125
5000.00
625.00
litre
8.000
30.25
242.00
867.00
8.67
875.67
131.35
1 007.02
190.00
190.00
Quantity
Rate
Amount
quintal
0.054
2 900.00
156.60
L.S
tonne
13.52
0.01
1.00
47.29
13.52
0.24
Day
Day
Day
L.S
0.37
0.37
0.92
4.55
151.50
141.60
135.25
1.00
56.06
52.39
124.43
4.55
407.79
4.08
411.87
61.78
473.65
47.37
47.35
Quantity
Rate
Amount
Code
0322 (B)
0123 (B)
0124 (B)
0114 (B)
(C)
6.8
Code
2602
2201
0123
0124
0115
0101
9999
6.9
Code
2602
2201
Description
Description
Details of cost for 10sqm.
Materials:
Bricks of class designation 75
Cement mortar 1:3 (Rate as per item no. 3
Carriage of bricks
LABOUR:
Mason 1st class
Mason 2nd class
Coolie
Bhishti
Sundries and scaffolding
TOTAL
Add 1 % for water charges
TOTAL
Add for contractors profit and overheads
15%
Cost for 10 sqm.
Cost for 1 sqm.
Say
206
Unit
Quantity
Rate
Amount
sqm
2.70
289.60
781.92
sqm
1.20
45.00
54.00
Day
Day
Day
0.12
0.12
0.06
151.50
141.60
135.25
18.18
16.99
8.12
879.21
0.97
880.18
14.74
water charges @ 1 % on B
contractors profit and overheads at
894.92
89.49
89.50
k work 7 cm thick with F.P.S. brick of class designation 75 in cement mortar 1:3
ement: 3 coarse sand) in superstructure.
Unit
Quantity
Rate
Amount
1 000 Nos
cum
1 000 Nos
377.00
0.18
377.00
1 900.00
3 169.60
141.88
716.30
573.70
53.49
Day
Day
Day
Day
L.S.
0.72
0.72
1.76
0.36
7.15
151.50
141.60
135.25
138.45
1.00
109.08
101.95
238.04
49.84
7.15
1 849.55
18.50
1 868.05
280.21
2 148.26
214.83
214.85
of class designation 75
t mortar 1:3 (Rate as per item no. 3.8 )
es and scaffolding
k work in plain arches in superstructure including centring and shuttering come for span upto 6 metres with F.P.S. bricks of class designation 75 in cement
ar 1:3 (1 cement: 3 coarse sand).
Unit
Quantity
Rate
Amount
1 000 Nos
cum
1 000 Nos
494.00
0.25
494.00
1 900.00
3 169.60
141.88
938.60
792.40
70.09
of class designation 75
Code
Description
9999
Sundries
Centering and Shuttering:
Taking a semi circular arch 3.6m span,
3.6m long and 0.40m thick
Area of centering =
3.142 x 1.8 x 3.6 = 20.37 sqm.
Brick work in Arch.
3.142x2.00x0.4x3.6 = 9.05cum.
Area per cum.
(B) 20.37/9.05 = 2.25 sqm.
(Rate same as in item 5.9.9
Scaffolding
Labour:
Mason 1st class
Mason 2nd class
Coolie
Bhishti
TOTAL
Add for water charges @ 1% on all except B
TOTAL
Add for contractors profit and overheads at
15% on all except B
Cost for 1 cum.
Say
9999
0123
0124
0115
0101
6.10
Code
Description
Details of cost for 1 cum.
Materials :
Bricks of class designation 75
Cement mortar 1:3 (Rate as per item no. 3.8
Carriage of bricks
Sundries
Centring and shuttering (Area same as in ite
No. 6.9
(B) (Rate same as per item No. 5.9.9
Scaffolding
LABOUR:
Mason 1 st class
Mason 2nd class
Coolie
Bhishti
TOTAL
Add for water charges @ 1% on all except B
TOTAL
Add for contractors profit and overheads at
15%on all except B
Cost for 1 cum.
Say
2602
2201
9999
9999
0123
0124
0115
0101
207
Unit
Quantity
Rate
L.S
2.73
1.00
sqm
2.25
514.70
L.S
18.85
1.00
Day
Day
Day
Day
0.53
0.53
2.29
0.20
151.50
141.60
135.25
138.45
ng and Shuttering:
a semi circular arch 3.6m span,
ng and 0.40m thick
a of centering =
1.8 x 3.6 = 20.37 sqm.
2.00x0.4x3.6 = 9.05cum.
Quantity
Rate
1 000 Nos
cum
1 000 Nos
L.S
538.00
0.25
538.00
2.73
1 900.00
3 169.60
141.88
1.00
sqm
L.S.
2.25
18.85
514.70
1.00
Day
Day
Day
Day
1.13
1.13
4.42
0.20
151.50
141.60
135.25
138.45
of class designation 75
t mortar 1:3 (Rate as per item no. 3.8)
Amount
2.73
1158.08
18.85
80.30
75.05
309.72
27.69
3473.51
23.15
3496.66
350.79
3847.45
3847.45
o 6 meters
Amount
1 022.20
792.40
76.33
2.73
1 158.08
18.85
171.20
160.01
597.80
27.69
4027.29
28.69
4055.98
434.68
4490.66
4490.65
6.11
Code
Description
Details of cost per sqm.
Centering and shuttering for arches and carved
surface exceeding 6m in span (an average of
8m)
Radius R = 5m
2R-2=4+4
1197
2204
1225
1034
2302
0112
0114
9999
tan-1 (4/3)=53.28
2x53.28=106
Surface area
=2x22/7x5x3.6x106/360=33.3 sqm.
Arc=9.25m
Material:
Tie-2x8x0.18x0.05 =0.144cum
Struts-2x2.5x0.1x0.1 =0.050cum.
Struts-2x1.77x0.1x0.1 =0.035cum.
Ribs-6x1.54x0.23x0.1 =0.213cum.
Struts-2x1.72x0.1x0.1 =0.034cum.
Total=0.476cum.
For four such frames =0.476x4= 1.904 cum.
laggings-75x3.6x0.125x0.075=2.531 cum.
Tie-2x3.6x0.225x0.038=0.062cum.
Brace-3x2x2.14x0.225x0.038=0.110
Brace-3x4x3.8x0.225x0.038=0.390
Sleepers-4x3.6x0.20x0.15=0.432
Sleepers-2x4x3.6x0.175x0.075=0.378
Vertical post-4x4x3.6x0.15x0.15=1.296
Total =7.103cum.
Qty taken l/8th of qty for cost using once =
7.103/8 = 0.8885 cum (887.90 cudm)
Carriage of wood
Fittings:
3 way straps 50mmxl0mm = 32 Nos.
32 no. @0.50cm each = 16m
Straps-50mmx 10mm = 8 Nos. @0.25cm each
= 2m
Total
= 18m
18m @ 3.9kg/m = 70.2 kg. = 0.702qtl.
Qty taken l/8th of qty for cost using once =
0.702/8 = 0.0878 qtl.
Bolts 160 Nos. 254 mm long 16mm dia.160x 0.254x 1.58=64.21 kg=0.64qtl.
Qty taken 1/8th of qty for cost using once =
0.64/8 = 0.08 qtl.
Carriage of steel = 0.1342 t
Qty taken 1/8th of qty for cost using once =
0.1342/8 = 0.0168 tonne
Labour:
Carpenter 2nd class
Beldar
Sundries
Less Cost of shuttering etc. for an arch
exceeding 6 m span i.e. for an average of 8 m
span
(A) Rate as per item no- 5.9.9
TOTAL
Add 1% for water charges on all exept A
TOTAL
208
Quantity
Rate
Amount
10 cum
887.90
160.00
14206.40
cum
0.8879
60.81
53.99
quintal
0.0878
2900.00
254.62
quintal
0.08
4300.00
344.00
tonne
0.0168
47.29
0.79
Day
Day
L.S
28.00
24.00
134.55
141.60
135.25
1.00
3964.80
3246.00
134.55
sqm
33.31
514.70
-17144.66
5060.49
222.05
5282.54
Code
Description
Add for contractors profit and overheads @
15% on all except A
Cost of 33.31 sqm.
Cost per sqm.
Say
6.12
6.12.1
Code
2602
2201
9999
0123
0124
0115
0101
Description
6.12
2602
2201
9999
0123
0124
0115
0101
Discription
Details of cost for 10 sqm.
Materials :
Brick of class designation 75
Cement mortar 1:3 (Rate as per item No. 3.9)
Carriage of bricks
Sundries & Scaffolding
LABOUR:
Mason 1 st class
Mason 2nd class
Coolie
Bhishti
TOTAL
Add 1% for water charges
TOTAL
Add for contractors profit and overheads @
15%
Cost for 10 sqm.
Cost for 1 sqm.
Say
209
Unit
Quantity
Rate
Amount
3364.08
8646.62
259.58
259.60
oarse sand)
Unit
Quantity
Rate
Amount
1 000 Nos
cum
1 000 Nos
L.S
565.00
0.28
565.00
13.52
1 900.00
3 169.60
141.88
1.00
1 073.50
887.49
80.16
13.52
Day
Day
Day
Day
0.45
0.45
1.55
0.70
151.50
141.60
135.25
138.45
68.18
63.72
209.64
96.92
2 493.13
24.93
2 518.06
377.71
2 895.77
289.58
289.60
arse sand)
Unit
Quantity
Rate
Amount
1 000 Nos
cum
1 000 Nos
L.S
565.00
0.28
565.00
13.52
1 900.00
2578.45
141.88
1.00
1 073.50
721.97
80.16
13.52
Day
Day
Day
Day
0.45
0.45
1.55
0.70
151.50
141.60
135.25
138.45
68.18
63.72
209.64
96.92
2 327.61
23.28
2 350.89
352.63
2 703.52
270.35
270.35
6.13
6.13.1
Code
2602
2201
9999
0123
0124
0115
0101
0115
6.13
6.13.2
Code
2602
2201
9999
0123
0124
0115
0101
0115
Description
Details of cost for 10 sqm.
Materials :
Brick of class designation 75
Cement mortar 1:4 (Rate as per item No. 3.9)
Carriage of bricks
Sundries & Scaffolding
LABOUR:
Mason 1st class
Mason 2nd class
Coolie
Bhishti
Extra labour for lifting materials:
Coolie
10 x 0.115 x 0.75 x1.5
TOTAL
Add 1% for water charges
TOTAL
Add for contractors profit and overheads @
15%
Cost for 10 sqm.
Cost for 1 sqm.
Say
210
arse sand)
Unit
Quantity
Rate
Amount
1 000 Nos
cum
1 000 Nos
Day
565.00
0.28
565.00
13.52
1 900.00
3169.60
141.88
1.00
1 073.50
887.49
80.16
13.52
Day
Day
Day
Day
0.60
0.60
2.00
0.70
151.50
141.60
135.25
138.45
90.90
84.96
270.50
96.92
Day
1.29
135.25
174.47
2 772.42
27.72
2 800.14
420.02
3 220.16
322.02
322.00
arse sand)
Unit
Quantity
Rate
Amount
1 000 Nos
cum
1 000 Nos
Day
565.00
0.28
565.00
13.52
1900.00
2578.45
141.88
1.00
1073.50
721.97
80.16
13.52
Day
Day
Day
Day
0.60
0.60
2.00
0.70
151.50
141.60
135.25
138.45
90.90
84.96
270.50
96.92
Day
1.29
135.25
174.47
2606.90
26.07
2632.97
394.95
3027.92
302.79
302.80
6.14
Code
Description
Details of cost for 59.83 sqm per four floors
Mobile crane.
Fuel consumption per hour = 8 litre.
Diesel oil
TOTAL
Add 1% for water charges
TOTAL
Add for contractors profit and overheads @15%
Cost of 59.83 sqm.
Cost for 1 sqm
Say
0037
1235
6.15
Extra for providing and placing in position 2 Nos. 6mm dia. M.S
course of half brick masonry (with F.P.S. bricks)
Code
Description
1002
2205
9999
6.16
6.16.1
Code
1984
2207
9999
0123
0124
0115
0101
Description
Details of cost for 1 cum.
Materials :
Brick tiles of class designation 100
Cement mortar 1:4(1 Cement: 4 coarse sand)
(Rate as per item no. 3.9)
Carriage or brick tiles
Sundries
Labour:
Mason 1st class
Mason 2nd class
Coolie
Bhishti
TOTAL
Add 1 % for water charges
TOTAL
Add for contractors profit and overheads @
15%
Cost for 1 cum.
Say
211
Quantity
Rate
Amount
per day
0.125
5000.00
625.00
litre
8.00
30.25
242.00
867.00
8.67
875.67
131.35
1 007.02
16.83
16.85
Quantity
Rate
Amount
quintal
0.132
3100.00
409.20
tonne
L.S.
0.0132
1.82
47.29
1.00
0.62
1.82
411.64
4.12
415.76
62.36
478.12
47.81
47.80
Quantity
Rate
Amount
1000 Nos
cum
777.00
0.40
1950.00
2578.45
1 515.15
1 031.38
1000 Nos
L.S.
777.00
4.55
85.13
1.00
66.15
4.55
Day
Day
Day
Day
0.70
0.70
1.54
0.20
151.50
141.60
135.25
138.45
106.05
99.12
208.28
27.69
3 058.37
30.58
3 088.95
463.34
3 552.29
3552.30
6.16 Tile brick masonry with tite bricks of class designation 100 in fou
6.16.2 Cement mortar 1 : 6 (1 cement : 6 coarse sand)
Code
1984
2207
9999
0123
0124
0115
0101
Description
Details of cost for 1 cum.
Materials :
Brick tiles of class designation 100
Cement mortar 1:6(Rate as per item no. 3.11)
Carriage or brick tiles
Sundries
Labour:
Mason 1st class
Mason 2nd class
Coolie
Bhishti
TOTAL
Add 1 % for water charges
TOTAL
Add for contractors profit and overheads @
15%
Cost for 1 cum.
Say
6.17
Tile brick masonry with machine moulded tile bricks of class des
conforming to IS : 2690 (Part I) -1993 in foundation and plinth in
1:6 (1 cement: 6 coarse sand)
Code
Description
Details of cost for 1 cum.
MATERIALS
Machine moulded tile bricks of class
designation 125
Carriage of Brick tiles
Cement mortar 1:6 (1 cement: 6 coarse sand).
(Rates as per item no. 3.11)
Sundries
LABOUR:
Mason 1st Class
Mason Ilnd Class
Coolie
Bhishti
TOTAL
Add 1% for water charges
TOTAL
Add for contractors profit and overheads @
15%
Cost of 1 Cum.
Say
7904
2207
9999
0123
0124
0115
0101
212
Quantity
Rate
Amount
1000 Nos
cum
1000 Nos
L.S.
777.00
0.40
777.00
4.55
1950.00
2578.45
85.13
1.00
1 515.15
794.92
66.15
4.55
Day
Day
Day
Day
0.70
0.70
1.54
0.20
151.50
141.60
135.25
138.45
106.05
99.12
208.28
27.69
2 821.91
28.22
2 850.13
427.52
3 277.65
3 277.65
Quantity
Rate
Amount
1000 Nos
777.00
2 717.00
2111.11
1000 Nos
cum
777.00
0.40
85.13
1 987.30
66.15
794.92
L.S.
4.55
1.00
4.55
Day
Day
Day
Day
0.70
0.70
1.54
0.20
151.50
141.60
135.25
138.45
106.05
99.12
208.28
27.69
3417.87
34.18
3452.05
517.81
3969.86
3969.85
6.18
Code
Discription
1984
2207
9999
0123
0124
0115
0101
0115
9999
6.19
Extra for tile brick masonry with tile bricks of class designatio
ture above floor five level for every four floors or part thereof.
Code
Discription
Details of cost for 1 cum.
Extra labour element for lifting of materials
(upto floor V level)
0.75x2.00= 1.50
Coolie
TOTAL
Add 1% for water charges
TOTAL
Add for contractors profit and overheads @
15%
Cost for 1 cum.
Say
0115
213
Quantity
Rate
Amount
1000
Nos
1000
Nos
cum
777.00
1950.00
1515.15
777.00
85.13
66.15
0.40
1987.30
794.92
L.S.
4.55
1.00
4.55
Day
Day
Day
Day
0.90
0.90
1.80
0.20
151.50
141.60
135.25
138.45
136.35
127.44
243.45
27.69
Day
L.S.
1.13
33.80
135.25
1.00
152.83
33.80
3074.65
30.75
3105.39
465.81
3571.20
3571.20
Quantity
Rate
Amount
Day
1.50
135.25
202.88
202.88
2.03
204.91
30.74
235.65
235.65
6.20
Code
Description
Details of cost for 1 cum.
MATERIALS
Tile bricks
Carriage of Brick tiles
Cement mortar 1:4 (Rate as per item no 3.9 )
Sundries
Centering and shuttering
Area same as in item no 6.9
Rate as per item no. 5.9.9
Scaffolding
Labour:
Mason 1st Class
Mason Ilnd Class
Coolie
Bhishti
TOTAL
Add 1% for water charges on all except A
TOTAL
Add for contractors profit and overheads @
15% on all except A
Cost of 1 Cum.
Say
1984
2207
9999
(A)
9999
0123
0124
0115
0101
6.21
Code
Description
Details of cost for 1 cum.
MATERIALS
Tile bricks
Carriage of tiles Brick
Cement mortar 1:4 (Rate as per item no 3.9 )
Sundries and shuttering
Centering and shuttering
Area same as in item no 6.9
Rate as per item no. 5.9.9
Scaffolding
Labour:
Mason 1st Class
Mason Ilnd Class
Coolie
Bhishti
TOTAL
Add for water charges @1% on all except A
TOTAL
Add for contractors profit and overheads @
15% on all except A
Cost of 1 Cum.
Say
1984
2207
9999
(A)
9999
0123
0124
0115
0101
214
Quantity
Rate
Amount
1000 Nos
1000 Nos
cum
L.S.
777.00
777.00
0.35
5.46
1950.00
85.13
2578.45
1.00
1515.15
66.15
902.46
5.46
sqm
2.25
514.70
1158.08
L.S.
18.85
1.00
18.85
Day
Day
Day
Day
0.79
0.79
3.21
0.20
151.50
141.60
135.25
138.45
119.68
111.86
434.15
27.69
4359.53
32.01
4391.54
485.02
4876.56
4876.55
Quantity
Rate
Amount
1000 Nos
1000 Nos
cum
L.S.
791.00
791.00
0.35
5.46
1950.00
85.13
2578.45
1.00
1542.45
67.34
902.46
5.46
sqm
L.S.
2.25
18.85
514.70
1.00
1158.08
18.85
Day
Day
Day
Day
1.50
1.50
5.33
0.20
151.50
141.60
135.25
138.45
227.25
212.40
720.88
27.69
4882.86
37.25
4920.11
564.30
5484.41
5484.40
6.22
Code
1984
2207
9999
0123
0124
0115
0101
6.23
Tile brick masonry work 5 cm thick with tile bricks of class des
cement mortar in 1:3 (1 cement: 3 coarse sand) in superstruct
Details of cost for 10 sqm.
Tile bricks (22.9cmx 11.2cmx5cm)
Carriage of tile bricks
Cement mortar 1:3 (Rate as per item no. 3.8)
Sundries and scaffolding
LABOUR:
Mason 1st class
Mason 2nd class
Coolie
Bhishti
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 10 Sqm.
Cost per sqm.
Say
Code
9999
6.24
Code
0011
0114
Description
Description
Details of cost for 1sqm. of Honey comb
brick works-Materials :
(1) Brick work, with bricks of class
designation 75, in cement mortar 1:4 (1
Cement: 4 Coarse sand) in superstructure
1 m x 1 x 0.143 m x 4.5/7.5 = 0.069 cum
Rate as per item no 6.4.1
TOTAL
Add for water charges @ 1 % on A
TOTAL
Add for contractors profit and overheads @
15% on A+B
Cost for 1 sqm.
Say
Description
215
Quantity
Rate
Amount
1000 Nos
1000 Nos
cum
L.S.
377.00
377.00
0.15
8.06
1950.00
85.13
3169.60
1.00
735.15
32.09
475.44
8.06
Day
Day
Day
Day
0.94
0.94
1.88
0.33
151.50
141.60
135.25
138.45
142.41
133.10
254.27
45.69
1826.21
18.26
1844.47
276.67
2121.14
212.11
212.10
Unit
Quantity
Rate
Amount
cum
0.069
2601.90
179.53
20.67
1.00
20.67
200.20
0.21
200.41
3.13
harges @ 1 % on A
203.54
203.55
Quantity
Rate
Amount
Day
Day
0.375
4.00
300.00
135.25
112.50
541.00
653.50
6.54
660.04
Code
Description
Add for contractors profit and overheads @ 15%
Cost of 14 cum. per 0.30m depth
Cost of 1 cum. per m depth
Say
0123
0124
0114
0115
Description
6.26
Code
Description
2602
2201
9999
0114
0123
0124
0115
0101
216
Unit
Quantity
Rate
Amount
99.01
759.05
180.73
180.75
er foul position.
Unit
Quantity
Rate
Amount
Day
Day
Day
Day
0.02
0.02
0.25
0.15
151.50
141.60
135.25
135.25
3.03
2.83
33.81
20.29
59.96
0.60
60.56
9.08
69.64
69.65
Quantity
Rate
Amount
1000 Nos
1000 Nos
cum
494.00
494.00
0.25
1900.00
141.88
1987.30
938.60
70.09
496.82
16.38
1.00
16.38
0.50
0.35
0.35
1.07
0.20
135.25
151.50
141.60
135.25
138.45
67.62
53.02
49.56
144.72
27.69
1864.50
18.64
1883.14
282.47
L.S.
Day
Day
Day
Day
Day
2165.61
2165.60
6.27
Code
Description
7900
2201
9999
0123
0124
0115
0101
6.28
Code
Description
Details of cost for 1 cum.
Modular Bricks of class designation 75
Carriage of bricks
Cement mortar 1:6(1 cement: 6 coarse
sand (Rate as per item no 3.11)
Sundries including steel/wooden strips for
making grooves.
Labour:
Mason 1 st class
Mason 2nd class
Coolie
Bhishti
TOTAL
Add 1 % for water charges
TOTAL
Add for contractors profit and overheads @
15%
Cost per cum.
Say
1986
2201
9999
0123
0124
0115
0101
217
s designation 75 in exposed brick work inl grooves 10mm wide 12mm deep complete
cement mortar 1:6 (1 cement: 6 coarse sand).
Unit
Quantity
Rate
Amount
1000 Nos
1000 Nos
cum
487.00
487.00
0.22
2050.00
141.88
1987.30
998.35
69.10
437.21
L.S.
16.38
1.00
16.38
Day
Day
Day
Day
0.33
0.33
1.00
0.18
151.50
141.60
135.25
138.45
50.00
46.73
135.25
24.92
1777.94
17.78
1795.72
269.36
2065.08
2065.10
dular bricks of class designation 125 in exrizontal and vertical grooves 10mm wide 12mm
o plinth level in cement mortar 1:6 (1 cement: 6
Unit
Quantity
Rate
Amount
1000 Nos
1000 Nos
cum
487.00
487.00
0.22
2700.00
141.88
1987.30
1314.90
69.10
437.21
L.S.
16.38
1.00
16.38
Day
Day
Day
Day
0.33
0.33
1.00
0.18
151.00
141.60
135.25
138.45
50.00
46.73
135.25
24.92
2094.49
20.94
2115.43
317.31
2432.74
2432.75
6.29
Code
Discription
Details of cost for 1 cum.
MATERIALS :
Machine moulded modular perforated bricks
of class designation 125
Carriage of Bricks
Cement mortar 1:6,(1 cement: 6 coarse sand).
(Rate as per item no 3.11)
Sundries i/c steel /wooden strips for making
grooves
LABOUR:
Mason 1st Class
Mason Ilnd Class
Coolie
Bhishti
TOTAL
Add 1 % for water charges
TOTAL
Add for contractors profit and overheads @
15%
Cost of 1 Cum.
Say
7903
2201
9999
0123
0124
0115
0101
6.30
Code
Discription
Details of cost for 1 cum.
MATERIALS :
Machine moulded modular perforated bricks
of class designation 125
Carriage of Bricks
Cement mortar 1:6,(1 cement: 6 coarse sand).
(Rate as per item no 3.11)
Sundries i/c steel /wooden strips for making
grooves
LABOUR:
Mason 1st Class
Mason Ilnd Class
Coolie
Bhishti
TOTAL
Add 1 % for water charges
TOTAL
Add for contractors profit and overheads @
15%
Cost of 1 Cum.
Say
7901
2201
2115
9999
0123
0124
0115
0101
218
P.S. bricks of class designation 125 in exrizontal and vertical grooves 10mm wide 12
upto plinth level in cement mortar 1:6(1 ceUnit
Quantity
Rate
Amount
1000 Nos
494.00
2767.00
1366.90
1000 Nos
cum
494.00
0.25
14.88
1987.30
70.09
496.82
L.S.
16.38
1.00
16.38
Day
Day
Day
Day
0.36
0.36
1.37
0.20
151.50
141.60
135.25
138.25
54.54
0.98
185.29
27.69
2268.69
22.69
2291.38
343.71
2635.09
2635.10
Quantity
Rate
Amount
1000 Nos
494.00
3233.00
1 597.10
1000 Nos
cum
494.00
0.25
141.88
1987.30
70.09
496.82
L.S.
16.38
1.00
16.38
Day
Day
Day
Day
0.35
0.35
1.07
0.20
151.50
141.60
135.25
138.45
54.54
50.98
185.29
27.69
2498.89
24.99
2523.88
378.58
2902.46
2902.45
6.31
Code
Discription
Details of cost for 1 cum.
MATERIALS :
Machine moulded modular perforated bricks
of class designation 125
Carriage of Bricks
Cement mortar 1:6 (1 cement: 6 coarse sand).
(Rate as per item no 3.11)
Sundries i/c steel /wooden strips for making
grooves
LABOUR:
Mason 1st Class
Mason Ilnd Class
Coolie
Bhishti
TOTAL
Add 1 % for water charges
TOTAL
Add for contractors profit and overheads @
15%
Cost of 1 Cum.
Say
7902
2201
9999
0123
0124
0115
0101
Code
7008
2201
9999
0123
0124
0115
0101
9999
0115
Discription
Details of cost for 1 cum.
Materials :
Clay flyash bricks of class designation 75
Cement mortar1: 4 (1 cement: 4 coarse sand)
(Rate as per item no 3.11)
Carriage of bricks
Sundries
Labour:
Mason 1st class
Mason 2nd class
Coolie
Bhishti
Scaffolding
Extra labour element required for lifting of
materials above floor two level upto floor V
level (0.75 x 1.5 = 1.13)
Coolie
TOTAL
Add 1 % for water charges
TOTAL
Add for contractors profit and overheads @
15%
Cost per cum.
Say
219
Quantity
Rate
Amount
1000 Nos
487.00
3200.00
1558.40
1000 Nos
cum
487.00
0.22
141.88
1987.30
69.10
437.21
L.S.
16.38
1.00
16.38
Day
Day
Day
Day
0.33
0.33
1.00
0.18
151.50
141.60
135.25
138.45
50.00
46.73
135.25
24.92
2337.99
23.38
2361.37
354.21
2715.58
2715.60
rse sand)
Unit
Quantity
Rate
Amount
1000 Nos
cum
494.00
0.25
1412.00
2578.45
697.53
644.61
1000 Nos.
L.S.
494.00
2.75
141.88
1.00
70.09
2.73
Day
Day
Day
Day
L .S.
0.47
0.47
1.80
0.20
8.97
151.50
141.60
135.25
138.45
1.00
71.20
66.55
243.45
27.69
8.97
Day
1.13
135.25
152.83
1985.65
19.86
2005.51
300.83
2306.34
2306.35
6.32
7008
2201
9999
0123
0124
0115
0101
9999
0115
Description
Details of cost for 1 cum.
Materials :
Clay flyash bricks of class designation 75
Cement mortar 1 : 6(1 cement: 6 coarse sand)
(Rate as per item no 3.11)
Carriage of bricks
Sundries
Labour:
Mason 1st class
Mason 2nd class
Coolie
Bhishti
Scaffolding
Extra labour element required for lifting of
materials above floor two level upto floor V
level (0.75x1.5= 1.13)
Coolie
TOTAL
Add 1% for water charges
TOTAL
Add for contractors profit and overheads @
15%
Cost per cum.
Say
6.33
Code
Description
Details of cost for per cum. per four floor
Extra labour element required for lifting of
materials
0.75x2.00=1.50
Coolie
0115
TOTAL
Add 1 % for water charges
TOTAL
Add for contractors profit and overheads @
15%
Cost of 1 Cum.
Say
220
Unit
Quantity
Rate
Amount
1000 Nos
cum
494.00
0.25
1412.00
1987.30
697.53
496.82
1000 Nos
L.S.
494.00
2.73
141.88
1.00
70.09
2.73
Day
Day
Day
Day
L.S
0.47
0.47
1.80
0.20
8.97
151.50
141.60
135.25
138.45
1.00
71.20
66.55
243.45
27.69
8.97
Day
1.13
135.25
152.83
1837.86
18.38
1856.24
278.44
2134.68
2134.70
Quantity
Rate
Amount
Day
1.50
135.25
202.88
202.88
2.03
204.91
30.74
235.65
235.65
6.34
Brick work with modular fly ash lime bricks (FALG Bricks) confo
2002, class designation 100 average compressive strength in s
plinth level upto floor V level in :
7737
2201
9999
0123
0124
0115
0101
9999
0115
Description
Brick work with modular fly ash lime bricks (FALG Bricks) confo
2002, class designation 100 average compressive strength in s
plinth level upto floor V level in :
6.34.2 Cement mortar 1:6(1 cement: 6 Coarse sand)
6.34
Code
7737
2201
9999
0123
0124
0115
0101
9999
0115
Description
Details of cost for 1 cum
Materials :
Fly ash bricks of class designation 100
Cement.mortar 1:6 (1 cement: 6 coarse sand)
Rate as per Item No. 3.11
Carriage of bricks
Sundries
Labour:
Mason 1st class
Mason 2nd class
Coolie
Bhishti
Scaffolding
Extra labour element required for lifting of
materials above floor two level upto floor V level
Coolie (0.75x1.5= 1.13)
TOTAL
Add 1% for water charges
TOTAL
Add for contractors profit and overheads @
15%
Cost per cum.
Say
221
bricks (FALG Bricks) conforming to IS: 12894compressive strength in super structure above
se sand)
Unit
Quantity
Rate
Amount
1000 Nos
cum
487.00
0.22
1792.00
2578.45
872.70
567.26
1000 Nos
L.S.
487.00
2.73
141.88
1.00
69.10
2.73
Day
Day
Day
Day
L.S.
0.47
0.47
1.80
0.20
22.36
151.50
141.60
135.25
138.45
1.00
71.20
66.55
243.45
27.69
22.36
Day
1.13
135.25
152.83
2095.87
20.96
2116.83
317.52
2434.35
2434.35
bricks (FALG Bricks) conforming to IS: 12894compressive strength in super structure above
se sand)
Unit
Quantity
Rate
Amount
1000 Nos
cum
487.00
0.22
1792.00
1987.30
872.70
437.21
1000 Nos
487.00
141.88
69.10
L.S.
Day
Day
Day
Day
L.S.
2.73
0.47
0.47
1.80
0.20
22.36
1.00
151.50
141.60
135.25
138.45
1.00
2.73
71.20
66.55
243.45
27.69
22.36
Day
1.13
135.25
152.83
1965.82
19.66
1985.48
297.82
2283.30
2283.30
6.35
7738
2201
9999
0123
0 124
0115
0101
9999
O115
Description
Code
7738
2201
9999
0123
0124
0115
0101
9999
0115
Description
Details of cost for 1 cum.
Materials :
Calcium silicate bricks of class designation 100
Cement .mortar 1:6(1 cement: 6 coarse sand)
(Rate as per item No. 3.9)
Carriage of bricks
Sundries
Labour:
Mason 1st class
Mason 2nd class
Coolie
Bhishti
Scaffolding
Extra labour element required for lifting of
materials above floor two level upto floor V
level
Coolie (0.75 x 1.5 = 1.13)
TOTAL
222
se sand)
Unit
Quantity
Rate
Amount
1000 Nos
cum
487.00
0.22
3083.00
2578.45
501.42
567.26
1000 Nos
L.S.
487.00
2.73
141.88
1.00
69.10
2.73
Day
Day
Day
Day
L.S.
0.47
0.47
1.80
0.20
22.36
151.50
141.60
135.25
138.45
1.00
71.20
66.55
243.45
27.69
22.36
Day
1.13
135.25
152.83
2724.59
27.25
2751.84
412.78
3164.62
3164.60
se sand)
Unit
Quantity
Rate
Amount
1000 Nos
cum
487.00
0.22
3083.00
1987.30
1501.42
437.21
1000 Nos
L.S.
487.00
2.73
141.88
1.00
69.10
2.73
Day
Day
Day
Day
L.S.
0.47
0.47
1.80
0.20
22.36
151.50
141.60
135.25
138.45
1.00
71.20
66.55
243.45
27.69
22.36
Day
1.13
135.25
152.83
2594.54
Code
Description
Add 1 % for water charges
TOTAL
Add for contractors profit and overheads @
15%
Cost per cum.
Say
6.36
Brick work with modular extruded burnt fly ash clay sewer bric
IS: 4885 - 1988) in foundation and plinth :
6.36.1
Code
7736
2201
9999
0123
0124
0115
0101
Description
Details of cost for 1 cum.
Materials :
Extruded burnt flyash clay sewer bricks
Cement mortar 1:4(1 cement: 4 coarse sand)
(Rate as per item No. 3.9)
Carriage of bricks
Sundries
Labour:
Mason 1st class
Mason 2nd class
Coolie
Bhishti
TOTAL
Add 1 % for water charges
TOTAL
Add for contractors profit and overheads @
15%
Cost per cum.
Say
6.37
Brick work with modular extruded burnt fly ash clay sewer bric
: 4885-1988) in arches in foundation and plinth in cement mort
sand).
Code
Description
Details of cost for 1 cum.
Materials :
Extruded burnt flyash clay sewer bricks
Cement mortar 1: 3 (1 cement: 3 fine sand).
(Rate as per item No. 3.3)
Carriage of bricks
Sundries
Centering and shuttering
(Rate as per item no 5.9.9 SH : RCC)
Labour:
Mason 1st class
Mason 2nd class
Coolie
Bhishti
TOTAL
Add 1 % for water charges except on A
TOTAL
Add for contractors profit and overheads @
15% except on A
Cost per cum
Say
7736
2201
9999
(A)
0123
0124
0115
0101
223
Unit
Quantity
Rate
Amount
25.95
2620.49
393.07
3013.56
3013.55
se sand)
Unit
Quantity
Rate
Amount
1000 Nos
cum
487.00
0.22
3550.00
2578.45
1728.85
567.26
1 000 Nos
L.S.
487.00
2.73
141.88
1.00
69.10
2.73
Day
Day
Day
Day
0.33
0.33
1.00
0.18
151.50
141.60
135.25
138.45
50.00
46.73
135.25
24.92
2624.84
26.25
2651.09
397.66
3048.75
3048.75
Quantity
Rate
Amount
1000 Nos
cum
487.00
0.25
3550.00
2870.00
1728.85
717.50
1000 Nos
L.S.
487.00
2.73
141.88
1.00
69.10
2.73
sqm
2.25
514.70
1 158.08
Day
Day
Day
Day
0.42
0.42
1.86
0.20
151.50
141.60
135.25
138.45
63.63
59.47
251.57
27.69
4078.62
29.21
4107.83
442.46
4550.29
4550.30
6.38
Code
Description
Details of cost for 1 cum.
MATERIALS :
Autoclaved aerated cement (AAC) blocks.
Cement mortar 1:4
(Rate as per Item No. 3.9)
Carriage of AAC blocks
Sundries
LABOUR:
Mason 1st Class
Mason Ilnd Class
Coolie
Bhishti
Reinforcement bars
Rate as per item no 5.22.1 of SH : RCC
TOTAL
Add 1 % for water charges except on (A)
TOTAL
Add for contractors profit and overheads @
15% except on (A)
Cost of 1 Cum.
Say
8655
2208
9999
0123
0124
0115
0101
(A)
6.39
Code
Description
Details of cost for 1 cum per floor
Extra labour element required for lifting of
materials.
Coolie (0.75 x 2 = 1.50)
TOTAL
Add 1% for water charges
TOTAL
Add for contractors profit and overheads @
15%
Cost per cum.
Say
0115
6.40
Code
8656
8657
9999
Description
Details of cost for 10 sqm.
MATERIAL
Gypsum panel 666 X 500 X 100 mm size.
Bonding plaster for Gypsum panel.
Sundries & scaffolding
LABOUR
224
Quantity
Rate
Amount
cum
cum
1.00
0.15
1650.00
2578.45
1650.00
386.77
cum
L.S
1.00
2.73
53.21
1.00
53.21
2.73
Day
Day
Day
Day
0.36
0.36
1.37
0.20
151.50
141.60
135.25
138.45
54.54
50.98
185.29
27.69
kg
13.20
41.50
547.80
2959.01
24.11
2983.12
365.30
3348.42
3348.40
Quantity
Rate
Amount
Day
1.50
135.25
202.88
202.88
2.03
204.91
30.74
235.65
235.65
Unit
Quantity
Rate
Amount
sqm
kg
L.S.
10.00
25.00
13.52
544.00
50.00
1.00
5440.00
1250.00
13.52
Code
0123
0114
Description
Mason (brick layer) 1st class
Beldar
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost for 10 sqm
Cost for 1 sqm
Say
6.41
Code
Description
0115
6.42
6.42.1
Code
8658
2201
9999
0123
0124
0115
0101
Description
225
Unit
Day
Day
Quantity
0.50
1.00
Rate
151.50
135.25
Amount
75.75
135.25
6914.52
69.15
6983.67
1047.55
8031.22
803.12
803.10
Quantity
Rate
Amount
Day
1.73
135.25
233.98
233.98
2.34
236.32
35.45
271.77
27.18
27.20
rse sand).
Unit
Quantity
Rate
Amount
1000 Nos
cum
494.00
0.25
2200.00
2578.45
1086.80
644.61
1000 Nos
L.S.
Day
Day
Day
Day
494.00
2.73
0.36
0.36
1.37
0.20
141.80
1.00
151.50
141.60
135.25
138.45
70.09
2.73
54.54
50.98
185.29
27.69
2122.73
21.23
2143.96
321.59
2465.55
2465.55
6.42
6.42.2
Code
8658
2201
9999
0123
0124
0115
0101
Description
Details of Cost for 10 cum
MATERIALS
Mechanised Autoclaved flyash lime bricks.
Cement morter 1:6 (1 cement: 6 coarse sand).
(Rate as per item no 3.11)
Carriage of Bricks
Sundries
Mason 1st class
Mason 2nd class
Coolie
Bhisti
TOTAL
Add for water charges @ 1%
TOTAL
Add for contractors profit and overheads @ 15%
Cost for 1 cum
Say
6.43
Code
Description
Details of cost for per cum. per four floors
Extra labour element required for lifting of
materials
0.75x2.00= 1.50
Coolie
TOTAL
Add 1 % for water charges
TOTAL
Add for contractors profit and overheads @ 15%
Cost of 1 Cum.
Say
0115
6.44
Code
Description
9999
2602
2201
0155
226
rse sand).
Unit
Quantity
Rate
Amount
1000 Nos
cum
494.00
0.25
2200.00
1987.30
1086.80
496.82
1000 Nos
L.S.
Day
Day
Day
Day
494.00
2.73
0.36
0.36
1.37
0.21
141.88
1.00
151.50
141.60
135.25
138.45
70.09
2.73
54.54
50.98
185.29
27.69
1974.94
19.75
1994.69
299.20
2293.89
2293.90
Quantity
Rate
Amount
Day
1.50
135.25
202.88
202.88
2.03
204.91
30.74
235.65
235.65
Quantity
Rate
Amount
L.S.
2.73
1.00
2.73
1000 Nos
1000 Nos
cum
46.00
46.00
0.00
1 900.00
141.88
2 278.85
87.40
6.53
8.20
Day
0.10
146.55
14.66
Code
0114
0101
9999
Description
Beldar
Bhisti
Sundries
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 10 metres
Cost of 1 metre
Say
227
Unit
Day
Day
L.S.
Quantity
0.10
0.03
2.73
Rate
135.25
138.45
1.00
Amount
13.52
4.15
2.73
139.92
1.40
141.32
21.20
162.52
16.25
16.25
229
SUB HEAD :
STONE W
UB HEAD : 7.0
TONE WORK
7.1 :
7.1.1 :
Code
1154
2215
0125
0114
0115
0101
9999
9999
7.2 :
Code
Description
Details of cost for 1 cum.
Scaffolding etc.
Labour:
Labour for laying cement concrete
Mason (2nd class)
Beldar
Extra labour for lifting of materials upto floor
V level-0.75xl.50= 1.13
Coolie
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 1 cum.
Say
9999
9999
0125
0114
0115
231
Quantity
Rate
Amount
cum
100 Nos
1.00
7.00
332.00
970.00
332.00
67.90
cum
cum
1.16
0.33
62.60
1987.30
72.62
655.81
Day
Day
Day
Day
L.S.
L.S.
1.07
1.07
0.71
0.09
45.76
4.42
141.60
135.25
135.25
138.45
1.00
1.00
151.51
144.72
96.03
12.46
45.76
4.42
1 583.23
15.83
1 599.06
239.86
1 838.92
1 838.90
Quantity
Rate
Amount
L.S.
67.34
1.00
67.34
L.S.
Day
Day
10.79
0.27
0.38
1.00
141.60
135.25
10.79
38.23
51.40
Day
1.13
135.25
152.83
320.59
3.21
323.80
48.57
372.37
372.35
7.3
Code
0114
0125
0115
Description
Details of cost for 1 cum.
Labour:
Mason (2nd class)
Coolie
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 1 cum.
Say
1157
2215
0125
0115
Description
232
Quantity
Rate
Amount
Day
2.00
135.25
270.50
270.50
2.70
273.20
40.98
314.18
314.20
Unit
Quantity
Rate
Amount
Day
Day
0.58
0.27
141.60
135.25
82.13
36.52
118.65
1.19
119.84
17.98
137.82
137.80
Unit
Quantity
Rate
Amount
cum
cum
0.29
0.29
332.00
62.60
96.28
18.15
Day
Day
1.42
0.35
141.60
135.25
201.07
47.34
362.84
3.63
366.47
54.97
hard stone in
hard stone in
421.44
421.45
7.5
Code
1157
2215
0125
0115
1157
1154
2215
0125
0114
0115
0101
9999
Description
Details of cost for 1 cum.
MaterialsCement mortar l:6 (Rate as per item No.3.11)
Stone at quarry
Through and bond stone 7 nos.
Carriage of stone
7.00x24cmx24cmx39cm = 0.16 cum.
1.21+0.16=1.37 cum.
Labour:
Mason (2nd class)
Beldar
Coolie
Bhisti
Sundries
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 1 cum.
Say
1157
1154
2215
0125
0114
0115
Description
Details of cost for 1 cum.
MaterialsCement mortar l:6 (Rate as per item No.3.11)
Stone at quarry
Through and bond stones 7 nos.
Carriage of stone
7.00x24cmx24cmx39cm = 0.16 cum.
1.10+0.16 cum = 1.26 cum.
Labour:
Mason (2nd class)
Beldar
Coolie
233
Quantity
Rate
Amount
cum
cum
0.10
0.10
332.00
62.60
33.20
6.26
Day
Day
0.27
0.53
141.60
135.25
38.23
71.68
149.37
1.49
150.86
22.63
173.49
173.50
Quantity
Rate
Amount
cum
cum
100 Nos
0.30
1.21
7.00
1 987.30
332.00
970.00
596.19
401.72
67.90
cum
1.37
62.60
85.76
Day
Day
Day
Day
L.S.
2.12
1.24
0.71
0.09
13.52
141.60
135.25
135.25
138.45
1.00
300.19
167.71
96.03
12.46
13.52
1 741.48
17.41
1 758.89
263.83
2 022.72
2 022.70
arse sand)
Unit
Quantity
Rate
Amount
cum
cum
100 Nos
0.30
1.10
7.00
1987.30
332.00
970.00
596.19
365.20
67.90
cum
1.26
62.60
78.88
Day
Day
Day
1.76
1.24
0.71
141.60
135.25
135.25
249.22
167.71
96.03
Code
0101
9999
Description
Bhisti
Sundries
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 1 cum.
Say
7.8 :
Extra for coursed rubble masonry with hard stone (first or sec
superstructure above plinth level and upto floor five level.
Code
Description
Details of cost for 1 cum.
Scaffolding etc.
Labour:
Mason (2nd class)
Beldar
Extra labour for lifting of materials upto floor
V level
1.0x1.50= 1.50
Coolie
TOTAL
Add 1 % for water charges
TOTAL
Add 15 %for contractors profit and overheads
Cost of 1 cum.
Say
9999
0125
0114
0115
7.9 :
Extra for coursed rubble masonry with hard stone (first or sec
superstructure above floor V level for every four floors or part
Code
Description
Details of cost per floor per cum.
Labour required for lifting of material
1.00x2.00=2.00
Beldar
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 1 cum.
Say
0114
Extra for coursed rubble masonry with hard stone (first or sec
7.1
7.10.1 Square or rectangular pillars
Code
0125
0115
Description
Details of cost for 1 cum.
Labour:
Mason (2nd class)
Coolie
TOTAL
Add 1% for water charges
TOTAL
Add. 15% for contractors profit and overheads
Cost of 1 cum.
Say
234
Unit
Quantity
Rate
Amount
Day
L.S.
0.09
13.52
138.45
1.00
12.46
13.52
1 647.11
16.47
1 663.58
249.54
1 913.12
1 913.10
Quantity
Rate
Amount
L.S.
9.30
2.60
24.18
Day
Day
0.26
0.35
141.60
135.25
36.82
47.34
Day
1.50
135.25
202.88
311.22
3.11
314.33
47.15
361.48
361.50
Quantity
Rate
Amount
Day
2.00
135.25
270.50
270.50
2.70
273.20
40.98
314.18
314.20
Quantity
Rate
Amount
Day
Day
0.67
0.27
141.60
135.25
94.87
36.52
131.39
1.31
132.70
19.90
152.60
152.60
7.10 : Extra for coursed rubble masonry with hard stone (first or sec
7.10.2 : Circular pillars.
Code
1157
2215
0125
0115
Description
Details of cost for 1 cum.
Extra stones.
Carriage of stone
Labour:
Labour for cutting and dressing :
Mason (2nd class)
Coolie
Total
Add 1 % for water charges.
Total
Add 15% for contractors profit and
overheads.
Cost of 1 cum
Say
7.11 :
Code
Description
Details of cost for 1 cum.
Extra stones
Carriage of stone
Labour for cutting and dressing:
Mason (2nd class)
Coolie
TOTAL
Add 1% for water charges
TOTAL
Add. 15% for contractors profit and overheads
Cost of 1 cum.
Say
1157
2215
0125
0115
1160
2216
0115
Description
Details of cost for 10 cudm.
MaterialsRed sand stone
Finished work = 10 cudm.+
Add wastage @ 33.3% = 3.33 cudm.
Total = 13.33 cudm.
Cost of stone
Carriage of stone @ 2.30kg/cudm =
13.33x2.30 = 30.659 kg = tonne
0.031 t.
Extra labour for lifting of materials upto floor
V level
0.01x1.50 = 0.015
Coolie
Dressing charges
Labour:
235
Quantity
Rate
Amount
cum
cum
0.32
0.32
332.00
62.60
106.24
20.03
Day
Day
1.67
0.35
141.60
135.25
236.47
47.34
410.08
4.10
414.18
62.13
476.31
476.30
Quantity
Rate
Amount
cum
cum
0.11
0.11
332.00
62.60
36.52
6.89
Day
Day
0.33
0.53
141.60
135.25
46.73
71.68
161.82
1.62
163.44
24.52
187.96
187.95
Unit
Quantity
Rate
Amount
10 cudm
13.33
45.00
59.98
tonne
0.03
47.29
1.47
Day
0.02
135.25
2.03
Code
0125
0102
0114
0115
0100
0125
0102
0114
0115
0100
0101
9999
9999
Description
Stone mason (plane work) 2nd class
Black smith 1 st class
Beldar
Coolie
Bandhani
Fixing charges
Labour:
Stone mason (plan work) 2nd class
Blacksmith 1st class
Beldar
Coolie
Bandhani
Bhishti
Scafolding
Mortar for laying and pointing
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 10 cudm.
Cost of 1 cum.
Say
Code
1161
2216
0115
0125
0102
0114
0115
0100
0125
0102
0114
Description
Details of cost for 10 cudm.
MaterialsWhite sand stone
Finished work = 10 cudm.+
Add wastage @ 33.3% = 3.33 cudm.
Total = 13.33 cudm.
Cost of stone
Carriage of stone @ 2.30kg/cudm =
13.33x2.30 = 30.659 kg = tonne
0.031 t.
Extra labour for lifting of materials upto floor
V level.
0.01x1.50=0.015
Coolie
Dressing charges
Labour:
Stone mason (plane work) 2nd class
Blacksmith 1st class
Beldar
Coolie
Bandhani
Fixing charges
Labour:
Stone mason (plane work) 2nd class
Blacksmith 1st class
Beldar
236
Unit
Day
Day
Day
Day
Day
Quantity
0.088
0.006
0.044
0.022
0.044
Rate
141.60
151.50
135.25
135.25
138.45
Amount
12.46
0.91
5.95
2.98
6.09
Day
Day
Day
Day
Day
Day
L.S.
L.S.
0.044
0.006
0.022
0.022
0.022
0.022
2.73
8.06
141.60
151.50
135.25
135.25
138.45
138.45
1.00
1.00
6.23
0.91
2.98
2.98
3.05
3.05
2.73
8.06
121.86
1.22
123.08
18.46
141.54
14154.00
14154.00
Unit
Quantity
Rate
Amount
10 cudm
tonne
13.33
0.031
50.00
47.29
66.65
1.47
Day
0.015
135.25
2.03
Day
Day
Day
Day
Day
0.088
0.006
0.044
0.022
0.044
141.60
151.50
135.25
135.25
138.45
12.46
0.91
5.95
2.98
6.09
Day
Day
Day
0.044
0.006
0.022
141.60
151.50
135.25
6.23
0.91
2.98
Code
0115
0100
0101
9999
9999
Description
Coolie
Bandhani
Bhishti
Scaffolding
Mortar for laying and pointing
TOTAL
Add 1% for water charges
TOTAL
Add.15% for contractors profit and overheads
Cost of 10 cudm.
Cost of 1 cum.
Say
Code
1160
2216
0115
0125
0102
0114
0115
0100
0125
0102
0114
0115
0100
0101
9999
9999
Description
Details of cost for 10 cudm.
MaterialsRed sand stone
Finished work = 10 cudm.+
Add wastage @ 33.3% = 3.33 cudm.
Total = 13.33 cudm.
Cost of stone
Carriage of stone @ 2.30kg/cudm =
13.33x2.30 = 30.659 kg = tonne say
0.031 t.
Extra labour for lifting of materials upto floor
V level
0.01x1.50 = 0.015
Coolie
Dressing charges
Labour:
Stone mason (plane work) 2nd class
Blacksmith 1st class
Beldar
Coolie
Bandhani
Fixing charges
Labour:
Stone mason (plan work) 2nd class
Blacksmith 1st class
Beldar
Coolie
Bandhani
Bhishti
Scafolding
Mortar for laying and pointing
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 10 cudm.
Cost of 1 cum.
Say
237
Unit
Day
Day
Day
L.S.
L.S.
Quantity
0.022
0.022
0.022
2.73
8.06
Rate
135.25
138.45
138.45
1.00
1.00
Amount
2.98
3.05
3.05
2.73
8.06
128.53
1.29
129.82
19.47
149.29
14929.00
14929.00
Unit
Quantity
Rate
Amount
10 cudm
13.33
45.00
59.98
tonne
0.031
47.29
1.47
Day
0.015
135.25
2.03
Day
Day
Day
Day
Day
0.176
0.012
0.088
0.044
0.088
141.60
151.50
135.25
135.25
138.45
24.92
1.82
11.90
5.95
12.18
Day
Day
Day
Day
Day
Day
L.S.
L.S.
0.044
0.006
0.022
0.022
0.022
0.022
2.73
8.06
141.60
151.50
135.25
135.25
138.45
138.45
1.00
1.00
6.23
0.91
2.98
2.98
3.05
3.05
2.73
8.06
150.24
1.50
151.74
22.76
174.50
17, 450.00
17, 450.00
7.12 :
7.12.2 :
Both face dressed.
7.12.2.2: White sand stone
Code
1161
2216
0115
0125
0102
0114
0115
0100
0125
0102
0114
0115
0100
0101
9999
9999
Description
238
Unit
Quantity
Rate
Amount
10 cudm
tonne
13.33
0.031
50.00
47.29
66.65
1.47
Day
0.015
135.25
2.03
Day
Day
Day
Day
Day
0.176
0.012
0.088
0.044
0.088
141.60
151.50
135.25
135.25
138.45
24.92
1.82
11.90
5.95
12.18
Day
Day
Day
Day
Day
Day
L.S.
L.S.
0.044
0.006
0.022
0.022
0.022
0.022
2.73
8.06
141.60
151.50
135.25
135.25
138.45
138.45
1.00
1.00
6.23
0.91
2.98
2.98
3.05
3.05
2.73
8.06
156.91
1.57
158.48
23.77
182.25
18, 225.00
18, 225.00
7.13 :
7.13.1 :
Code
1160
2216
0125
0102
0114
0115
0100
0125
0102
0114
0115
0100
0101
9999
9999
9999
9999
7.13 :
Description
Details of cost for 10 cudm.
MaterialsRed sand stone
Finished work = 10 cudm.+
Add wastage @ 33.3% = 3.33 cudm.
Total = 13.33 cudm.
Cost of Stone
Carriage of stone @ 2.30kg/cudm =
13.33x2.30 = 30.659 kg = tonne say
0.031 t.
Dressing charges
Labour:
Stone mason (plane work) 2nd class
Blacksmith 1st class
Beldar
Coolie
Bandhani
Fixing charges
Labour:
Stone mason (plane work) 2nd class
Blacksmith 1st class
Beldar
Coolie
Bandhani
Bhishti
Scaffolding
Mortar for laying and pointing
Centering and shuttering
Extra for using white cement
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 10 cudm.
Cost of 1 cum.
Say
1161
2216
Description
Details of cost for 10 cudm.
MaterialsWhite sand stone
Finished work = 10 cudm.
Add wastage @ 33.3% = 3.33 cudm.
Total = 13.33 cudm.
Cost of stone
Carriage of stone @ 2.30kg/cudm =
239
Quantity
Rate
Amount
10 cudm
tonne
13.33
0.031
45.00
47.29
59.98
1.47
Day
Day
Day
Day
Day
0.088
0.006
0.044
0.022
0.044
141.60
151.50
135.25
135.25
138.45
12.46
0.91
5.95
2.98
6.09
Day
Day
Day
Day
Day
Day
L.S.
L.S
L.S
L.S
0.044
0.006
0.022
0.022
0.022
0.022
2.73
8.06
13.52
8.06
141.60
151.50
135.25
135.25
138.45
138.45
1.00
1.00
1.00
1.00
6.23
0.91
2.98
2.98
3.05
3.05
2.73
8.06
13.52
8.06
141.41
1.41
142.82
21.42
164.24
16 ,424.00
16 ,424.00
Quantity
Rate
Amount
10 cudm
tonne
13.33
0.031
50.00
47.29
66.65
1.47
Code
0125
0102
0114
0115
0100
0125
0102
0114
0115
0100
0101
9999
9999
9999
9999
7.14 :
7.14.1
Code
1160
2216
0125
0102
0126
0114
0115
0100
0125
0102
Description
13.33x2.30=30.659 kg = tonne say
0.031 t
Dressing charges
Labour:
Stone mason (plane work) 2nd class
Blacksmith st class
Beldar
Coolie
Bandhani
Fixing charges
Labour:
Stone mason (plane work) 2nd class
Blacksmith 1st class
Beldar
Coolie
Bandhani
Bhishti
Scaffolding
Mortar for laying and pointing
Centering and shuttering
Extra for using white cement
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 10 cudm.
Cost of 1 cum.
Say
Description
Details of cost for 10 cudm.
MaterialsRed sand stone
Finished work = 10 cudm.+
Add wastage @ 33.3% = 3.33 cudm.
Total = 13.33 cudm.
Cost of stone
Carriage of stone @ 2.30kg/cudm =
13.33x2.30=30.659 kg=tonne say 0.031 t
Dressing charges
Labour:
Stone mason (plane work) 2nd class
Blacksmith 1st class
Stone mason (ornamental work)
Beldar
Coolie
Bandhani
Fixing charges
Labour:
Stone mason (plane work) 2nd class
Blacksmith 1st class
240
Unit
Quantity
Rate
Amount
Day
Day
Day
Day
Day
0.088
0.006
0.044
0.022
0.044
141.60
151.50
135.25
135.25
138.45
12.46
0.91
5.95
2.98
6.09
Day
Day
Day
Day
Day
Day
L.S.
L.S.
L.S.
L.S.
0.044
0.006
0.022
0.022
0.022
0.022
2.73
8.06
13.52
8.06
141.60
151.50
135.25
135.25
138.45
138.45
1.00
1.00
1.00
1.00
6.23
0.91
2.98
2.98
3.05
3.05
2.73
8.06
13.52
8.06
148.08
1.48
149.56
22.43
171.99
17, 199.00
17, 199.00
Quantity
Rate
Amount
10 cudm
tonne
13.33
0.031
45.00
47.29
59.98
1.47
Day
Day
Day
Day
Day
Day
0.176
0.006
0.176
0.044
0.022
0.044
141.60
151.50
151.50
135.25
135.25
138.45
24.92
0.91
26.66
5.95
2.98
6.09
Day
Day
0.044
0.006
141.60
151.50
6.23
0.91
Code
0114
0115
0100
0101
9999
9999
9999
9999
Description
Beldar
Coolie
Bandhani
Bhishti
Scaffolding
Mortar for laying and pointing
Centring and shuttering
Extra for using white cement
TOTAL
Add 1 % for water charges
TOTAL
Add 15%Tor contractors profit and overheads
Cost of 10 cudm.
Cost of 1 cum.
Say
7.14 : Stone work plain ashlar in domes in cement mortar 1:3 (1 cem
including c;entring shuttering and pointing with white cement
cement : 2 stone dust) with an admixture of pigment matching
7.14.2 : White sand stone
Code
1161
2216
0125
0102
0126
0114
0115
0100
0125
0102
0114
0115
0100
0101
9999
9999
9999
9999
Description
Details of cost for 10 cudm.
MaterialsWhite sand stone
Finished work = 10 cudm.+
Add wastage @ 33.3% = 3.33 cudm.
Total = 13.33 cudm.
Cost of stone
Carriage of stone @ 2.30kg/cudm =
13.33x2.30=30.659 kg=tonne say 0.031 t
Dressing charges
Labour:
Stone mason (plane work) 2nd class
Blacksmith 1st class
Stone mason (ornamental work)
Beldar
Coolie
Bandhani
Fixing charges
Labour:
Stone mason (plane work) 2nd class
Blacksmith 1st class
Beldar
Coolie
Bandhani
Bhishti
Scaffolding
Mortar for laying and pointing
Centring and shuttering
Extra for using white cement
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 10 cudm.
Cost of 1 cum.
Say
241
Unit
Day
Day
Day
Day
L.S.
L.S.
L.S.
L.S.
Quantity
0.022
0.022
0.022
0.022
2.73
8.06
33.15
8.06
Rate
135.25
135.25
138.45
138.45
1.00
1.00
1.00
1.00
Amount
2.98
2.98
3.05
3.05
2.73
8.06
33.15
8.06
200.16
2.00
202.16
30.32
232.48
23, 248.00
23, 248.00
Quantity
Rate
Amount
10 cudm
tonne
13.33
0.031
50.00
47.29
66.65
1.47
Day
Day
Day
Day
Day
Day
0.176
0.006
0.176
0.044
0.022
0.044
141.60
151.50
151.50
135.25
135.25
138.45
24.92
0.91
26.66
5.95
2.98
6.09
Day
Day
Day
Day
Day
Day
L.S.
L.S.
L.S.
L.S.
0.044
0.006
0.022
0.022
0.022
0.022
2.73
8.06
33.15
8.06
141.60
151.50
135.25
135.25
138.45
138.45
1.00
1.00
1.00
1.00
6.23
0.91
2.98
2.98
3.05
3.05
2.73
8.06
33.15
8.06
206.83
2.07
208.90
31.34
240.24
24, 024.00
24, 024.00
Code
1160
2216
0125
0102
0114
0115
0100
0125
0102
0114
0115
0100
0101
9999
9999
0115
7.15 :
7.15.1 :
7.15.1.2 :
Code
Description
Details of cost for 10 cudm.
MaterialsRed sand stone
Finished work = 10 cudm.
Add wastage @ 33.3% = 3.33 cudm.
Total = 13.33 cudm.
Cost of stone
Carriage of stone @ 2.30kg/cudm =
13.33x2.30=30.659 kg= tonne say 0.031 t
Dressing charges
Labour:
Stone mason (plane work) 2nd class
Blacksmith 1st class
Beldar
Coolie
Bandhani
Fixing charges
Labour:
Stone mason (plane work) 2nd class
Blacksmith 1st class
Beldar
Coolie
Bandhani
Bhishti
Scaffolding
Mortar for laying and pointing
Extra labour for lifting of materials upto floor
V level= 0.01x1.50 = 0.015
Coolie
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 10 cudm.
Cost of 1 cum.
Say
Description
Details of cost for 10 cudm.
MaterialsRed sand stone
Finished work = 10 cudm.
242
Unit
Quantity
Rate
Amount
10 cudm
tonne
13.33
0.031
45.00
47.29
59.98
1.47
Day
Day
Day
Day
Day
0.059
0.006
0.044
0.022
0.044
141.60
151.50
135.25
135.25
138.45
8.35
0.91
5.95
2.98
6.09
Day
Day
Day
Day
Day
Day
L.S.
L.S.
0.044
0.006
0.022
0.022
0.022
0.022
2.73
8.06
141.60
151.50
135.25
135.25
138.45
138.45
1.00
1.00
6.23
0.91
2.98
2.98
3.05
3.05
2.73
8.06
Day
0.02
135.25
2.03
117.75
1.18
118.93
17.84
136.77
13677.00
13677.00
Unit
Quantity
Rate
Amount
Code
1160
2216
0115
0125
0102
0114
0115
0100
0125
0102
0114
0115
0100
0101
9999
9999
7.15 :
Description
Add wastage @ 33.3% = 3.33 cudm.
Total = 13.33 cudm.
Cost of stone
Carriage of stone @ 2.30kg/cudm
13.33x2.30 = 30.659 kg = tonne say
0.031 t.
Extra labour for lifting of materials upto floor
V level
0.01x1.50 = 0.015
Coolie
Dressing charges
Labour:
Stone mason (plane work) 2nd class
Black smith 1st class
Beldar
Coolie
Bandhani
Fixing charges
Labour:
Stone mason (plan work) 2nd class
Blacksmith 1st class
Beldar
Coolie
Bandhani
Bhishti
Scafolding
Mortar for laying and pointing
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 10 cudm.
Cost of 1 cum.
Say
1161
2216
0125
Description
Details of cost for 10 cudm.
MaterialsRed sand stone
Finished work = 10 cudm.+
Add wastage @ 33.3% = 3.33 cudm.
Total = 13.33 cudm.
Cost of stone
Carriage of stone @ 2.30kg/cudm =
13.33x2.30=30.659 kg= tonne say 0.031 t
Dressing charges
Labour:
Stone mason (plane work) 2nd class
243
Unit
Quantity
Rate
Amount
10 cudm
13.33
45.00
59.98
tonne
0.031
47.29
1.47
Day
0.015
135.25
2.03
Day
Day
Day
Day
Day
0.118
0.012
0.088
0.044
0.088
141.60
151.50
135.25
135.25
138.45
16.71
1.82
11.90
5.95
12.18
Day
Day
Day
Day
Day
Day
L.S.
L.S.
0.044
0.006
0.022
0.022
0.022
0.022
2.73
8.06
141.60
151.50
135.25
135.25
138.45
138.45
1.00
1.00
6.23
0.91
2.98
2.98
3.05
3.05
2.73
8.06
142.03
1.42
143.45
21.52
164.97
16497.00
16497.00
Unit
Quantity
Rate
Amount
10 cudm
tonne
13.33
0.031
50.00
47.29
66.65
1.47
Day
0.059
141.60
8.35
Code
0102
0114
0115
0100
0 125
0102
0114
0115
0100
0101
9999
9999
0115
Description
Blacksmith 1st class
Beldar
Coolie
Bandhani
Fixing charges
Labour:
Stone mason (plane work) 2nd class
Blacksmith 1st class
Beldar
Coolie
Bandhani
Bhishti
Scaffolding
Mortar for laying and pointing
Extra labour for lifting of materials upto floor
Vlevel=0.01xl.50 = 0.015
Coolie
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 10 cudm.
Cost of 1 cum.
Say
Code
1161
2216
0115
0125
0102
0114
0115
0100
Description
Details of cost for 10 cudm.
MaterialsWhite sand stone
Finished work = 10 cudm.
Add wastage @ 33.3% = 3.33 cudm.
Total = 13.33 cudm.
Cost of stone
Carriage of stone @ 2.30kg/cudm =
13.33x2.30 = 30.659 kg = tonne kg say
0.031 t.
Extra labour for lifting of material upto floor
V level.
0.01 x 1.50 = 0.015
Coolie
Dressing charges
Labour:
Stone mason (plane work) 2nd class
Blacksmith 1st class
Beldar
Coolie
Bandhani
Fixing charges
Labour:
244
Unit
Day
Day
Day
Day
Quantity
0.006
0.044
0.022
0.044
Rate
151.50
135.25
135.25
138.45
Amount
0.91
5.95
2.98
6.09
Day
Day
Day
Day
Day
Day
L.S.
L.S.
0.044
0.006
0.022
0.022
0.022
0.022
2.73
8.06
141.60
151.50
135.25
135.25
138.45
138.45
1.00
1.00
6.23
0.91
2.98
2.98
3.05
3.05
2.73
8.06
Day
0.015
135.25
2.03
124.42
1.24
125.66
18.85
144.51
14451.00
14451.00
Unit
Quantity
Rate
Amount
10 cudm
tonne
13.33
0.031
50.00
47.29
66.65
1.47
Day
0.015
135.25
2.03
Day
Day
Day
Day
Day
0.118
0.012
0.088
0.044
0.088
141.60
151.50
135.25
135.25
138.45
16.71
1.82
11.90
5.95
12.18
Code
0125
0 102
0114
0115
0100
0101
9999
9999
Description
Stone mason (plane work) 2nd class
Blacksmith 1st class
Beldar
Coolie
Bandhani
Bhishti
Scaffolding
Mortar for laying and pointing
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 10 cudm.
Cost of 1 cum
Say
7.16 :
Extra for stone work, plain ashlar or ashlar punched above flo
four floors or part thereof.
Code
Description
Details of cost for 10 cudm above floor V level
Labour required for lifting of material
(above floor five level for each additional four
floors) or part thereof.
Extra labour for lifting of materials above floor
V level (0.01 x 2.00 = 0.020)
Beldar
TOTAL
Add 1 % for water charges,
TOTAL
Add 15% for contractors profit and overheads
Cost of 10 cudm.
Cost of 1 cum.
Say
0114
Description
Details of cost for 10 cudm.
Labour and materials
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 10 cudm.
Cost of 1 cum.
Say
7.18 :
Code
Description
Details of cost for 10 cudm.
Labour and materials
TOTAL
Add 1% for water charges
9999
245
Unit
Day
Day
Day
Day
Day
Day
L.S.
L.S.
Quantity
0.044
0.006
0.022
0.022
0.022
0.022
2.73
8.06
Rate
141.60
151.50
135.25
135.25
138.45
138.45
1.00
1.00
Amount
6.23
0.91
2.98
2.98
3.05
3.05
2.73
8.06
0.00
148.70
1.49
150.19
22.53
172.72
17272.00
17272.00
Quantity
Rate
Amount
Day
0.02
135.25
2.70
2.70
0.03
2.73
0.41
3.14
314.00
314.00
Unit
Quantity
Rate
Amount
L.S.
8.97
1.00
8.97
8.97
0.09
9.06
1.36
10.42
1 042.00
1 042.00
Quantity
Rate
Amount
L.S.
6.24
1.00
6.24
6.24
0.06
Code
Description
TOTAL
Add 15 % for contractors profit and overheads
Cost of 10 cudm.
Cost of 1 cum.
Say
7.19
Code
Description
Details of cost per sqm.
Centering and shuttering for arches and carved
surface exceeding 6m in span (an average of
8m)
Radius R = 5m 2R-2=4+4
tan-(4/3)=53.28
2x53.28=106
Surface area
=2x22/7x5x3.6x106/360=33.3lsqm.
Arc=9.25m
Material:
Tie-2x8x0. 18x0.05 =0.144cum
Struts-2x2.5x0.1x0.1 =0.050cum.
Struts-2x 1.77x0.1x0. l=0.035cum.
Ribs-6x 1.54x0.23x0.1 =0.213cum.
Struts-2xl .72x0.1x0.1 =0.034cum.
Total=0.476cum.
For four such frames
=0.476x4= 1.904 cum.
Iaggings-75x3.6x0.125x0.075=2.531 cum.
Tie-2x3.6x0.225x0.038=0.062cum.
Brace-3x2x2.14x0.225x0.038=0.110
Brace-3x4x3.8x0.225x0.038=0.390
Sleepers-4x3.6x0.20x0.15=0.432
Sleepers-2x4x3.6xO. 175x0.075=0.378
Vertical post-4x4x3.6x0.15x0.15=1.296
Total =7.103cum. Qty taken l/8th of qty for cost using once =
7.103/8 = 0.8879 cum
Carriage of wood
Fittings:
3 way straps 50mmxl0mm = 32 Nos.
32 no. @0.50cm each = 16m
Straps-50mmxl0mm = 8 Nos. @0.25cm each
= 2m
Total = 18m
18m, wt @ 3.9kg/m = 70.2 kg. = 0.702q
Qty taken l/8th of qty for cost using once =
0.702/8 = 0.08775 Qtl.
Bolts 160 Nos. 254 mm long 16mm dia.160x.254xl .58=64.21 kg=0.64q.
Qty taken l/8th of qty for cost using once =
0.64/8 = 0.08 Qtl.
Carriage of steel = 0.1342t
Qty taken l/8th of qty for cost using once =
0.1342/8 = 0.01677 t
Labour:
1197
2204
1225
1034
2302
246
Unit
Quantity
Rate
Amount
6.30
0.94
7.24
724.00
724.00
Quantity
Rate
Amount
10 cudm
887.90
160.00
14 206.40
cum
0.8879
60.81
53.99
quintal
0.0878
2 900.00
254.62
quintal
0.08
4 300.00
344.00
tonne
0.0168
47.29
0.79
Code
0112
0114
9999
Description
Carpenter 2nd class
Beldar
Sundries
Less Cost of shuttering etc. for an arch
exceeding 6 m span i.e. for an average of 8 m
span
(A) Rate as per item 5.9.9
TOTAL
Add 1 % for water charges on all exept A
TOTAL
Add for contractors profit and overheads @
15 % on all exept A
Cost of 33.31 sqm.
Cost per sqm of soffit area
Say
7.20 : Stone work sunk or moulded or sunk and moulded upto floor fi
mortar 1:6 (1 cement: 6 coarse sand) including pointing with
1:2 (1 white cement : 2 stone dust) with an admixture of pig
stone shade :
7.20.1 : Red sand stone
Code
1160
2216
9999
0125
0102
0114
0115
0100
0125
0102
0114
0115
0100
0101
9999
9999
0115
Description
Details of cost for 10 cudm.
MaterialsRed sand stone
Finished work = 10 cudm.
Add wastage @ 33.3% = 3.33 cudm.
Total = 13.33 cudm.
Cost of red sand stone
Cement mortar : Carriage of stone @
2.30kg/cudm= 13.33x2.30 = 30.659 kg =
0.031 t.
Extra for using white cement
Dressing charges
Labour:
Stone mason (plane work) 2nd class
Blacksmith 1 st class
Beldar
Coolie
Bandhani
Fixing charges
Labour:
Stone mason (plane work) 2nd class
Blacksmith 1st class
Beldar
Coolie
Bandhani
Bhishti
Scaffolding
Mortar for laying and pointing
Extra labour for lifting of materials upto floor
V level
0.01x1.50=0.015
Coolie
TOTAL
247
Unit
Day
Day
L.S.
Quantity
28.00
24.00
134.55
Rate
141.60
135.25
1.00
Amount
3 964.80
3 246.00
134.55
sqm
33.31
514.70
(-)17 144.66
5 060.49
222.05
5 282.54
3 364.08
8 646.62
259.58
259.60
Unit
Quantity
Rate
Amount
10 cudm
tonne
13.33
0.031
45.00
47.29
59.98
1.47
L.S.
8.06
1.00
8.06
Day
Day
Day
Day
Day
0.291
0.006
0.044
0.022
0.044
141.60
151.50
135.25
135.25
138.45
41.21
0.91
5.95
2.98
6.09
Day
Day
Day
Day
Day
Day
L.S.
L.S.
0.044
0.006
0.022
0.022
0.022
0.022
2.73
8.06
141.60
151.50
135.25
135.25
138.45
138.45
1.00
1.00
6.23
0.91
2.98
2.98
3.05
3.05
2.73
8.06
Day
0.015
135.25
2.03
158.67
Code
Description
Add 1% for water charges
TOTAL
AddJWo for contractors profit and overheads
Cost of 10 cudm.
Cost of 1 cum.
Say
7.20 : Stone work sunk or moulded or sunk and moulded upto floor fiv
mortar 1:6 (1 cement : 6 coarse sand) including pointing with w
1:2 (1 white cement : 2 stone dust) with an admixture of pigm
stone shade
7.20.2 : White sand stone
Code
1161
2216
9999
0125
0102
0114
0115
0100
0125
0102
0114
0115
0100
0101
9999
9999
0115
Description
Details of cost for 10 cudm.
MaterialsRed sand stone
Finished work = 10 cudm.+
Add wastage @ 33.3% = 3.33 cudm.
Total = 13.33 cudm.
Cost of stone
Carriage of stone @ 2.30kg/cudm =
13.33x2.30=30.659kg=0.031t.
Extra for using white cement
Dressing charges
Labour:
Stone mason (plane work) 2nd class
Blacksmith 1 st class
Beldar
Coolie
Bandhani
Fixing charges
Labour:
Stone mason (plane work) 2nd class
Blacksmith 1 st class
Beldar
Coolie
Bandhani
Bhishti
Scaffolding
Mortar for laying and pointing
Extra labour for lifting of materials upto floor
V level
0.01x1.50=0.015
Coolie
TOTAL
Add 1% for water charges
TOTAL.
Add 15%for contractors profit and overheads
Cost of 10 cudm.
Cost of 1 cum.
Say
248
Unit
Quantity
Rate
Amount
1.59
160.26
24.04
184.30
18430.00
18430.00
Unit
Quantity
Rate
Amount
10 cudm
tonne
13.33
0.031
50.00
47.29
66.65
1.47
L.S.
8.06
1.00
8.06
Day
Day
Day
Day
Day
0.291
0.006
0.044
0.022
0.044
141.60
151.50
135.25
135.25
138.45
41.21
0.91
5.95
2.98
6.09
Day
Day
Day
Day
Day
Day
L.S.
L.S.
0.044
0.006
0.022
0.022
0.022
0.022
2.73
8.06
141.60
151.50
135.25
135.25
138.45
138.45
1.00
1.00
6.23
0.91
2.98
2.98
3.05
3.05
2.73
8.06
Day
0.015
135.25
2.03
165.34
1.65
166.99
25.05
192.04
19 204.00
19 204.00
7.21 : Extra for stone work sunk or moulded or sunk and mlded or ca
7.21.1 : Triangular or Square or rectangular pillars
Code
9999
Description
Details of cost for 10 cudm.
Labour
TOTAL
Add 1 % for water charges
TOTAL
Add. 15% for contractors profit and overheads
Cost of 10 cudm.
Cost of 1 cum.
Say
7.21 : Extra for stone work sunk or moulded or sunk and moulded or
7.21.2 : Circular or polygonal pillars Code
Description
Details of cost for 10 cudm.
9999
Labour
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 10 cudm.
Cost of 1 cum.
Say
7.22 :
Code
0125
0114
Description
Details of cost for a cornice 30cm long 60cm
deep and 15cm projection
Extra labour:
Stone mason (2nd class)
Beldar
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 30cm long 60cm deep and 15cm girth
Cost of per metre per cm girth
Say
7.23 : Stone work (machine cut edges) for wall lining etc. (veneer wo
with a grout of 12mm thick cement mortar 1:3 (1 cement : 3 c
pointing in white cement mortar 1:2 (1 white cement : 2 stone
of pigment matching the stone shade : (To be secured to the b
cramps which shall be paid for separately):
7.23.1 : Red sand stone - exposed face fine dressed with rough backin
7.23.1.1 : 70 mm thick.
Code
Description
Details of cost for 1 sqm.
MaterialsFinished work = 70 cudm. +
Add wastage @ 33.3% = 23.33 cudm.
Total = 93.33 cudm.
249
Quantity
Rate
Amount
L.S.
11.70
1.00
11.70
11.70
0.12
11.82
1.77
13.59
1 359.00
1 359.00
d in cornices.
Unit
Quantity
Rate
Amount
L.S.
33.15
1.00
33.15
33.15
0.33
33.48
5.02
38.50
3 850.00
3 850.00
Unit
Quantity
Rate
Amount
Day
Day
0.50
0.75
141.60
135.25
70.80
101.44
172.24
1.72
173.96
26.09
200.05
8.89
8.90
Quantity
Rate
Amount
Code
1160
2216
9999
0125
0102
0114
0115
oioo
0125
0100
0114
0115
0101
1237
9999
2112
Description
Cost of stone
Carriage of stone @ 2.30kg/cudm
Extra for using white cement
Dressing charges
Labour:
Stone mason (plane work) 2nd class
Blacksmith 1st class
Beldar
Coolie
Bandhani
Fixing charges
Labour:
Stone mason (for plain work) 2nd class
Bandhani
Beldar
Coolie
Bhisti
Cutting sand stone slab by mechanical device
Scaffolding
Mortar for laying and pointing
(Rate as per item No 3.8 of S.H. mortar)
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 1 sqm.
Say
7.23 : Stone work (machine cut edges) for wall lining etc. (veneer w
with a grout of 12mm thick cement mortar 1:3 (1 cement : 3 c
pointing in white cement mortar 1:2 (1 white cement : 2 stone
admixture of pigment matching the stone shade : (To be secu
means of cramps which shall be paid for separately):
7.23.1 : Red sand stone - exposed face fine dressed with rough back
7.23.1.2:60 mm thick.
Code
1160
2216
9999
0125
0102
0114
0115
0101
0125
O100
Description
Details of cost for 1 sqm.
MaterialsFinished work = 60 cudm.
Add wastage @ 33.3% = 20 cudm.
Total = 80 cudm.
Cost of stone
Carriage of stone @ 2.30kg/cudm
Extra for using white cement
Dressing charges
Labour:
Stone mason (plane work) 2nd class
Blacksmith 1st class
Beldar
Coolie
Bandhani
Fixing charges
Labour:
Stone mason (for plain work) 2nd class
Bandhani
250
Unit
10 cudm
tonne
L.S.
Quantity
93.33
0.215
26.91
Rate
45.00
47.29
1.00
Amount
419.98
10.17
26.91
Day
Day
Day
Day
Day
1.35
0.032
0.224
0.112
0.224
141.60
151.50
135.25
135.25
138.45
191.16
4.85
30.30
15.15
31.01
Day
Day
Day
Day
Day
metre
L.S.
cum
0.448
0.336
0.336
0.336
0.336
4.00
19.76
0.018
141.60
138.45
135.25
135.25
138.45
6.00
1.00
3 169.60
63.44
46.52
45.44
45.44
46.52
24.00
19.76
57.05
1 077.70
10.78
1 088.48
163.27
1251.75
1 251.75
Quantity
Rate
Amount
10 cudm
tonne
L.S.
80.00
0.184
26.91
45.00
47.29
1.00
360.00
8.70
26.91
Day
Day
Day
Day
Day
1.35
0.032
0.224
0.112
0.224
141.60
151.50
135.25
135.25
138.45
191.16
4.85
30.30
15.15
31.01
Day
Day
0.448
0.336
141.60
138.45
63.44
46.52
Code
0114
0115
0101
1237
9999
2112
Description
Beldar
Coolie
Bhisti
Cutting sand stone slab by mechanical device
Scaffolding
Mortar for laying and pointing
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 1 sqm.
Say
7.23 : Stone work (machine cut edges) for wall lining etc. (veneer wo
with a grout of 12mm thick cement mortar 1:3 (1 cement : 3 c
pointing in white cement mortar 1:2 (1 white cement : 2 stone
admixture of pigment matching the stone shade : (To be secur
means of cramps which shall be paid for separately):
7.23.1 : Red sand stone - exposed face fine dressed with rough backin
7.23.1.3:50 mm thick.
Code
1160
2216
9999
0125
0102
0114
0115
0101
0125
0101
0114
0115
0101
1237
9999
Description
Details of cost for 1 sqm.
MaterialsFinished work = 50 cudm.
Add wastage @ 33.3% = 16.7 cudm.
Total = 66.7 cudm.
Cost of stone
Carriage of stone @ 2.30kg/cudm
Extra for using white cement
Dressing charges
Labour:
Stone mason (plane work) 2nd class
Blacksmith 1st class
Beldar
Coolie
Bandhani
Fixing charges
Labour:
Stone mason (for plain work) 2nd class
Bandhani
Beldar
Coolie
Bhisti
Cutting sand stone slab by mechanical device
Scaffolding
Mortar for laying and pointing
(Rate as per item No 3.8 fo SH- mortar)
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 1 sqm.
Say
251
Unit
Day
Day
Day
metre
L.S.
cum
Quantity
0.336
0.336
0.336
4.00
19.76
0.018
Rate
135.25
135.25
138.45
6.00
1.00
3 169.60
Amount
45.44
45.44
46.52
24.00
19.76
57.05
1 016.25
10.16
1 026.41
153.96
1 180.37
1 180.35
Quantity
Rate
Amount
10 cudm
tonne
L.S.
66.70
0.153
26.91
45.00
47.29
1.00
300.15
7.24
26.91
Day
Day
Day
Day
Day
1.35
0.032
0.224
0.112
0.224
141.60
151.50
135.25
135.25
138.45
191.16
4.85
30.30
15.15
31.01
Day
Day
Day
Day
Day
metre
L.S.
cum
0.448
0.336
0.336
0.336
0.336
4.00
19.76
0.018
141.60
138.45
135.25
135.25
138.45
6.00
1.00
3 169.60
63.44
46.52
45.44
45.44
46.52
24.00
19.76
57.05
954.94
9.55
964.49
144.67
1 109.16
1 109.15
7.23 :
Stone work (machine cut edges) for wall lining etc. (veneer w
with a grout of 12mm thick cement mortar 1:3 (1 cement : 3 c
pointing in white cement mortar 1:2 (1 white cement : 2 ston
admixture of pigment matching the stone shade : (To be secu
means of cramps which shall be paid for separately):
7.23.1 : Red sand stone - exposed face fine dressed with rough back
7.23.1.4: 40 mm thick.
Code
1160
2216
9999
0125
0102
0114
0115
0100
0125
0100
0114
0115
0101
1237
9999
7.23 :
Description
Details of cost for 1 sqm.
MaterialsFinished work = 40 cudm.
Add wastage @ 33.3% = 13.33 cudm.
Total = 53.33 cudm.
Cost of stone
Carriage of stone @ 2.30kg/cudm
Extra for using white cement
Dressing charges
Labour:
Stone mason (plane work) 2nd class
Blacksmith 1st class
Beldar
Coolie
Bandhani
Fixing charges
Labour:
Stone mason (for plain work) 2nd class
Bandhani
Beldar
Coolie
Bhisti
Cutting sand stone slab by mechanical device
Scaffolding
Mortar for laying and pointing
(Rate as per item No 3.8 of SH - mortar)
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 1 sqm.
Say
Stone work (machine cut edges) for wall lining etc. (veneer w
with a grout of 12mm thick cement mortar 1:3 (1 cement : 3 c
pointing in white cement mortar 1:2 (1 white cement : 2 ston
admixture of pigment matching the stone shade : (To be secu
means of cramps which shall be paid for separately):
7.23.1 : Red sand stone - exposed face fine dressed with rough back
7.23.1.5: 30 mm thick.
Code
1160
Description
Details of cost for 1 sqm.
MaterialsFinished work = 30 cudm.
Add wastage @ 33.3% = 9.99cudm.
Total = 39.99 cudm.
Cost of stone
252
Quantity
Rate
Amount
10 cudm
tonne
L.S.
53.33
0.123
26.91
45.00
47.29
2.6
239.98
5.82
26.91
Day
Day
Day
Day
Day
1.35
0.032
0.224
0.112
0.224
141.6
151.5
135.25
135.25
138.45
191.16
4.85
30.3
15.15
31.01
Day
Day
Day
Day
Day
metre
L.S.
cum
0.448
0.336
0.336
0.336
0.336
4.00
19.76
0.018
141.6
138.45
135.25
135.25
138.45
6.00
2.6
3 169.60
63.44
46.52
45.44
45.44
46.52
24.00
19.76
57.05
893.35
8.93
902.28
135.34
1 037.62
1 037.60
Quantity
Rate
Amount
10 cudm
39.99
45.00
179.96
Code
2216
9999
0125
0102
0114
0115
0101
0125
0100
0114
0115
0101
1237
9999
Description
Carriage of stone @ 2.30kg/cudm
Extra for using white cement
Dressing charges
Labour:
Stone mason (plane work) 2nd class
Blacksmith 1 st class
Beldar
Coolie
Bandhani
Fixing charges
Labour:
Stone mason (for plain work) 2nd class
Bandhani
Beldar
Coolie
Bhisti
Cutting sand stone slab by mechanical device
Scaffolding
Mortar for laying and pointing
(Rate as per item No 3.8 of SH. mortar)
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 1 sqm.
Say
Stone work (machine cut edges) for wall lining etc. (veneer
with a grout of 12mm thick cement mortar 1:3 (1 cement : 3
pointing in white cement mortar 1:2 (1 white cement : 2 sto
admixture of pigment matching the stone shade : (To be sec
means of cramps which shall be paid for separately):
7.23.2 :
Red sand stone - Exposed face machine cut and table rub
7.23.2.1: 70 mm thick
7.23 :
Code
1160
2216
9999
0125
0102
0114
0115
0100
0125
0101
0114
Description
Details of cost for 1 sqm.
MaterialsFinished work = 70 cudm. +
Add wastage @ 33.3% = 23.33 cudm.
Total = 93.33 cudm.
Cost of stone
Carriage of stone @ 2.30kg/cudm
Extra for using white cement
Dressing charges
Labour:
Stone mason (plane work) 2nd class
Blacksmith 1st class
Beldar
Coolie
Bandhani
Fixing charges
Labour:
Stone mason (for plain work) 2nd class
Bandhani
Beldar
253
Unit
tonne
L.S.
Quantity
0.09
26.91
Rate
47.29
1.00
Amount
4.35
26.91
Day
Day
Day
Day
Day
1.35
0.032
0.224
0.112
0.224
141.60
151.50
135.25
135.25
138.45
191.16
4.85
30.30
15.15
31.01
Day
Day
Day
Day
Day
metre
L.S.
cum
0.448
0.336
0.336
0.336
0.336
4.00
19.76
0.02
141.60
138.45
135.25
135.25
138.45
6.00
1.00
3 169.60
63.44
46.52
45.44
45.44
46.52
24.00
19.76
57.05
831.86
8.32
840.18
126.03
966.21
966.20
Quantity
Rate
Amount
10 cudm
tonne
L.S.
93.33
0.215
26.91
45.00
47.29
1.00
419.98
10.17
26.91
Day
Day
Day
Day
Day
2.70
0.064
0.448
0.224
0.448
141.60
151.50
135.25
135.25
138.45
382.32
9.70
60.59
30.30
62.03
Day
Day
Day
0.448
0.336
0.336
141.60
138.45
135.25
63.44
46.52
45.44
Code
0115
0101
1237
9999
Description
Coolie
Bhisti
Cutting sand stone slab by mechanical device
Scaffolding
Mortar for laying and pointing
(Rate as per item No. 3.8 of SH- mrtar)
TOTAL
Add 1% for water charges
TOTAL
Add 15 % for contractors profit and overheads
Cost of 1 sqm.
Say
: Stone work (machine cut edges) for wall lining etc. (veneer w
with a grout of 12mm thick cement mortar 1:3 (1 cement : 3 c
pointing in white cement mortar 1:2 (1 white cement : 2 ston
admixture of pigment matching the stone shade : (To be secu
by_ means of cramps which shall be paid for separately):
7.23.2 : Red sand stone - Exposed face machine cut and table rubbe
7.23.2.2: 60 mm thick
7.23
Code
1160
2216
9999
0125
0102
0114
0115
0100
0125
0100
0114
0115
0101
1237
9999
Description
Details of cost for 1 sqm.
MaterialsFinished work = 60 cudm.
Add wastage @ 33.3% = 20 cudm.
Total = 80 cudm.
Cost of stone
Carriage of stone @ 2.30kg/cudm
Extra for using white cement
Dressing charges
Labour:
Stone mason (plane work) 2nd class
Blacksmith 1st class
Beldar
Coolie
Bandhani
Fixing charges
Labour:
Stone mason (for plain work) 2nd class
Bandhani
Beldar
Coolie
Bhisti
Cutting sand stone slab by mechanical device
Scaffolding
Mortar for laying and pointing
(Rate as per item No. 3.8 of SH- mortar)
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 1 sqm.
Say
254
Unit
Day
Day
metre
L.S.
cum
Quantity
0.336
0.336
4.00
19.76
0.018
Rate
135.25
138.45
6.00
1.00
3 169.60
Amount
45.44
46.52
24.00
19.76
57.05
1 350.17
13.50
1 363.67
204.55
1 568.22
1 568.20
Quantity
Rate
Amount
10 cudm
tonne
L.S.
80.00
0.184
10.35
45.00
47.29
2.60
360.00
8.70
26.91
Day
Day
Day
Day
Day
2.70
0.06
0.45
0.22
0.45
141.60
151.50
135.25
135.25
138.45
382.32
9.70
60.59
30.30
62.03
Day
Day
Day
Day
Day
metre
L.S.
cum
0.45
0.34
0.34
0.34
0.34
4.00
19.76
0.02
141.60
138.45
135.25
135.25
135.25
6.00
1.00
3 169.60
63.44
46.52
45.44
45.44
46.52
24.00
9.76
57.05
1 288.72
12.89
1 301.61
195.24
1 496.85
1 496.85
7.23 :
Stone work (machine cut edges) for wall lining etc. (veneer w
with a grout of 12mm thick cement mortar 1:3 (1 cement : 3 c
pointing in white cement mortar 1:2 (1 white cement : 2 ston
admixture of pigment matching the stone shade : (To be secu
means of cramps which shall be paid for separately):
7.23.2 : Red sand stone - Exposed face machine cut and table rubbe
7.23.2.3:50 mm thick
Code
1160
2216
9999
0125
0102
0114
0115
0101
0125
0100
0114
0115
0101
1237
9999
Description
Details of cost for 1 sqm.
MaterialsFinished work = 50 cudm. +
Add wastage @ 33.3% = 16.7 cudm.
Total = 66.7 cudm.
Cost of stone
Carriage of stone @ 2.30kg/cudm
Extra for using white cement
Dressing charges
Labour:
Stone mason (plane work) 2nd class
Blacksmith 1st class
Beldar
Coolie
Bandhani
Fixing charges
Labour:
Stone mason (for plain work) 2nd class
Bandhani
Beldar
Coolie
Bhisti
Cutting sand stone slab by mechanical device
Scaffolding
Mortar for laying and pointing
(Rate as per item No. 3.8 of SH- mortar)
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 1 sqm.
Say
Stone work (machine cut edges) for wall lining etc. (veneer w
with a grout of 12mm thickcement mortar 1:3 (1 cement : 3 c
pointing in white cement mortar 1:2 (1 white cement : 2 ston
admixture of pigment matching the stone shade : (To be secu
means of cramps which shall be paid for separately):
7.23.2 : Red sand stone - Exposed face machine cut and table rubbe
7.23.2.4: 40 mm thick
7.23 :
Code
1160
Description
Details of cost for 1 sqm.
MaterialsFinished work = 40 cudm. +
Add wastage @ 33.3% = 13.33 cudm.
Total = 53.33 cudm.
Cost of stone
255
Quantity
Rate
Amount
10 cudm
tonne
L.S.
66.70
0.153
26.91
45.00
47.29
2.60
300.15
7.24
26.91
Day
Day
Day
Day
Day
2.70
0.064
0.448
0.224
0.448
141.60
151.50
135.25
135.25
138.45
382.32
9.70
60.59
30.30
62.03
Day
Day
Day
Day
Day
metre
L.S.
cum
0.448
0.336
0.336
0.336
0.336
4.00
19.76
0.018
141.60
138.45
135.25
135.25
138.45
6.00
1.00
3 169.60
63.44
46.52
45.44
45.44
46.52
24.00
19.76
57.05
1 227.41
12.27
1 239.68
185.95
1 425.63
1 425.65
Quantity
Rate
Amount
10 cudm
53.33
45.00
239.98
Code
2216
9999
0125
0102
0114
0115
0101
0125
0101
0114
0115
0101
1237
9999
Description
Carriage of stone @ 2.30kg/cudm
Extra for using white cement
Dressing charges
Labour:
Stone mason (plane work) 2nd class
Blacksmith 1st class
Beldar
Coolie
Bandhani
Fixing charges
Labour:
Stone mason (for plain work) 2nd class
Bandhani
Beldar
Coolie
Bhisti
Cutting sand stone slab by mechanical device
Scaffolding
Mortar for laying and pointing
(Rate as per item No. 3.8 of SH- mortar)
TOTAL
Add 1 % for water charges
TOTAL
Add 1 5% for contractors profit and overheads
Cost of 1 sqm.
Say
Stone work (machine cut edges) for wall lining etc. (veneer w
with a grout of 12mm thick cement mortar 1:3 (1 cement : 3
pointing in white cement mortar 1:2 (1 white cement : 2 ston
admixture of pigment matching the stone shade : (To be secu
means of cramps which shall be paid for separately):
7.23.2 : Red sand stone - Exposed face machine cut and table rubbe
7.23.2.5: 30 mm thick
7.23 :
Code
1160
2216
9999
0125
0102
0114
0115
0101
0125
0101
0114
Description
Details of cost for 1 sqm.
MaterialsFinished work = 30 cudm. +
Add wastage @ 33.3% - 9.99cudm.
Total - 39.99 cudm.
Cost of stone
Carriage of stone @ 2.30kg/cudm
Extra for using white cement
Dressing charges
Labour:
Stone mason (plane work) 2nd class
Blacksmith 1st class
Beldar
Coolie
Bandhani
Fixing charges
Labour:
Stone mason (for plain work) 2nd class
Bandhani
Beldar
256
Unit
tonne
L.S.
Quantity
0.123
26.41
Rate
47.29
1.00
Amount
5.82
26.91
Day
Day
Day
Day
Day
2.7
0.064
0.448
0.224
0.448
141.60
151.50
135.25
135.25
138.45
382.32
9.70
60.59
30.30
62.03
Day
Day
Day
Day
Day
metre
L.S.
cum
0.448
0.336
0.336
0.336
0.336
4.00
19.76
0.018
141.60
138.45
135.25
135.25
138.45
6.00
1.00
3 169.60
63.44
46.52
45.44
45.44
46.52
24.00
19.76
57.05
1 165.82
11.66
1 177.48
176.62
1 354.10
1 354.10
Quantity
Rate
Amount
10 cudm
tonne
L.S.
39.99
0.092
26.91
45.00
47.29
1.00
179.96
4.35
26.91
Day
Day
Day
Day
Day
2.7
0.064
0.448
0.224
0.448
141.60
151.50
135.25
135.25
138.45
382.32
9.70
60.59
30.30
62.03
Day
Day
Day
0.448
0.336
0.336
141.60
138.45
135.25
63.44
46.52
45.44
Code
0115
0101
1237
9999
Description
Coolie
Bhisti
Cutting sand stone slab by mechanical device
Scaffolding
Mortar for laying and pointing
(Rate as per item No. 3.8 of SH- mortar)
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 1 sqm.
Say
Stone work (machine cut edges) for wall lining etc. (veneer w
with a grout of 12mm thick cement mortar 1:3 (1 cement : 3 c
pointing in white cement mortar 1:2 (1 white cement : 2 ston
admixture of pigment matching the stone shade : (To be secu
means of cramps which shall be paid for separately):
7.23.3 : White sand stone - exposed face fine dressed with rough ba
7.23.3.1: 70 mm thick.
7.23 :
Code
1161
2216
9999
0125
0102
0114
0115
0100
0125
0100
0114
0115
0101
1237
9999
Description
Details of cost for 1 sqm.
MaterialsFinished work = 70 cudm. +
Add wastage @ 33.3% = 23.33 cudm.
Total = 93.33 cudm.
Cost of stone
Carriage of stone @ 2.30kg/cudm
Extra for using white cement
Dressing charges
Labour:
Stone mason (plane work) 2nd class
Blacksmith 1st class
Beldar
Coolie
Bandhani
Fixing charges
Labour:
Stone mason (for plain work) 2nd class
Bandhani
Beldar
Coolie
Bhisti
Cutting sand stone slab thick by mechanical
device
Scaffolding
Mortar for laying and pointing
(Rate as per item No. 3.8 of SH- mortar)
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 1 sqm.
Say
257
Unit
Day
Day
metre
L.S.
cum
Quantity
0.336
0.336
4.00
19.76
0.018
Rate
135.25
138.45
6.00
1.00
3 169.60
Amount
45.44
46.52
24.00
19.76
57.05
1 104.33
11.04
I 115.37
167.31
1 282.68
1 282.70
Quantity
Rate
Amount
10 cudm
tonne
L.S.
93.33
0.215
26.91
50.00
47.29
1.00
466.65
10.17
26.91
Day
Day
Day
Day
Day
1.35
0.032
0.224
0.112
0.224
141.6
151.5
135.25
135.25
138.45
191.16
4.85
30.3
15.15
31.01
Day
Day
Day
Day
Day
metre
0.448
0.336
0.336
0.336
0.336
4.00
141.6
138.45
135.25
135.25
138.45
6.00
63.44
46.52
45.44
45.44
46.52
24.00
L.S.
cum
19.76
0.018
1.00
3 169.60
19.76
57.05
1 124.37
11.24
1 135.61
170.34
1 305.95
1 305.95
7.23 :
Stone work (machine cut edges) for wall lining etc. (veneer w
with a grout of 12mm thick cement mortar 1:3 (1 cement : 3 c
pointing in white cement mortar 1:2 (1 white cement : 2 ston
admixture of pigment matching the stone shade : (To be secu
means of cramps which shall be paid for separately):
7.23.3 : White sand stone - exposed face fine dressed with rough ba
7.23.3.2: 60 mm thick.
Code
1161
2216
9999
0125
0102
0114
0115
0100
0125
C100
0114
0115
0101
1237
9999
Description
Details of cost for 1 sqm.
MaterialsFinished work = 60 cudm.
Add wastage @ 33.3% = 20 cudm.
Total = 80 cudm.
Cost of stone
Carriage of stone @ 2.30kg/cudm
Extra for using white cement
Dressing charges
Labour:
Stone mason (plane work) 2nd class
Blacksmith 1st class
Beldar
Coolie
Bandhani
Fixing charges
Labour:
Stone mason (for plain work) 2nd class
Bandhani
Beldar
Coolie
Bhisti
Cutting sand stone slab thick by mechanical
device
Scaffolding
Mortar for laying and pointing
(Rate as per item No. 3.8 of SH- mortar)
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 1 sqm.
Say
7.23 : Stone work (machine cut edges) for wall lining etc. (veneer w
with a grout of 12mm thick cement mortar 1:3 (1 cement : 3 c
pointing in white cement mortar 1:2 (1 white cement : 2 ston
admixture of pigment matching the stone shade : (To be secu
means of cramps which shall be paid for separately):
7.23.3 : White sand stone - exposed face fine dressed with rough ba
7.23.3.3: 50 mm thick.
Code
Description
Details of cost for 1 sqm.
MaterialsFinished work = 50 cudm.
Add wastage @ 33.3% = 1,6.7 cudm.
Total = 66.7 cudm.
258
Quantity
Rate
Amount
10 cudm
tonne
L.S.
80.00
0.18
26.91
50.00
47.29
1.00
400.00
8.70
26.91
Day
Day
Day
Day
Day
1.35
0.032
0.224
0.112
0.224
141.60
151.50
135.25
135.25
138.45
191.16
4.85
30.30
15.15
31.01
Day
Day
Day
Day
Day
metre
0.448
0.336
0.336
0.336
0.336
4.00
141.60
138.45
135.25
135.25
138.45
6.00
63.44
46.52
45.44
45.44
46.52
24.00
L.S.
cum
19.76
0.018
1.00
3 169.60
19.76
57.05
1 056.25
10.56
1 066.81
160.02
1 226.83
1 226.85
Quantity
Rate
Amount
Code
1161
2216
9999
0125
0102
0114
0115
0100
0125
0100
0114
0115
0101
1237
9999
7.23 :
Description
Cost of stone
Carriage of stone @ 2.30 kg/cudm.
Extra for using white cement
Dressing charges
Labour:
Stone mason (plane work) 2nd class
Blacksmith 1st class
Beldar
Coolie
Bandhani
Fixing charges
Labour:
Stone mason (for plain work) 2nd class
Bandhani
Beldar
Coolie
Bhisti
Cutting sand stone slab thick by mechanical
device
Scaffolding
Mortar for laying and pointing
(Rate as per item No. 3.8 of SH- mortar)
TOTAL
Add 1 % for water charges
TOTAL
Add 15 % for contractors profit and overheads
Cost of 1 sqm.
Say
Stone work (machine cut edges) for wall lining etc. (veneer w
with a grout of 12mm thick cement mortar 1:3 (1 cement : 3
pointing in white cement mortar 1:2 (1 white cement : 2 ston
admixture of pigment matching the stone shade : (To be secu
means of cramps which shall be paid for separately):
7.23.3 : White sand stone - exposed face fine dressed with rough ba
7.23.3.4: 40 mm thick.
Code
1161
2216
9999
0125
0102
0114
0115
0100
0125
Description
Details of cost for 1 sqm.
MaterialsFinished work = 40 cudm.
Add wastage @ 33.3% = 13.3 cudm.
Total = 53.3 cudm.
Cost of stone
Carriage of stone @ 2.30 kg/cudm.
Extra for using white cement
Dressing charges
Labour:
Stone mason (plane work) 2nd class
Blacksmith 1st class
Beldar
Coolie
Bandhani
Fixing charges
Labour:
Stone mason (for plain work) 2nd class
259
Unit
10 cudm
tonne
L.S.
Quantity
66.70
0.153
26.91
Rate
50.00
47.29
1.00
Amount
333.50
7.24
26.91
Day
Day
Day
Day
Day
1.35
0.032
0.224
0.112
0.224
141.60
151.50
151.50
135.25
138.45
191.16
4.85
30.30
15.15
31.01
Day
Day
Day
Day
Day
metre
0.448
0.336
0.336
0.336
0.336
4.00
141.60
138.45
135.25
135.25
138.45
6.00
63.44
46.52
45.44
45.44
46.52
24.00
L.S.
cum
19.76
0.02
1.00
3 169.60
19.76
57.05
988.29
9.88
998.17
149.73
1 147.90
1 147.90
Quantity
Rate
Amount
10 cudm
tonne
L.S.
53.30
0.123
26.91
50.00
47.29
1.00
266.50
5.82
26.91
Day
Day
Day
Day
Day
1.35
0.032
0.224
0.112
0.224
141.60
151.50
135.25
135.25
138.45
191.16
4.85
30.30
15.15
31.01
Day
0.448
141.60
63.44
Code
0101
0114
0115
0101
1237
9999
Description
Bandhani
Beldar
Coolie
Bhisti
Cutting sand stone slab thick by mechanical
device
Scaffolding
Mortar for laying and pointing
(Rate as per item No. 3.8 of SH- mortar)
TOTAL
Add 1% for water charges
TOTAL
Add 10% for contractors profit and overheads
Cost of 1 sqm.
Say
Stone work (machine cut edges) for wall lining etc. (veneer wo
with a grout of 12mm thick cement mortar 1:3 (1 cement : 3 co
pointing in white cement mortar 1:2 (1 white cement : 2 stone
admixture of pigment matching the stone shade : (To be secur
means of cramps which shall be paid for separately):
7.23.3 : White sand stone - exposed face fine dressed with rough bac
7.23.3.5: 30 mm thick.
7.23:
Code
1161
2216
9999
0125
0102
0114
0115
0100
0125
0100
0114
0115
0101
1237
9999
Description
Details of cost for 1 sqm.
MaterialsFinished work = 30 cudm. +
Add wastage @ 33.3% = 9.99 cudm.
Total = 39.99 cudm.
Cost of stone
Carriage of stone @ 2.30 kg/cudm.
Extra for using white cement
Dressing charges
Labour:
Stone mason (plane work) 2nd class
Blacksmith 1st class
Beldar
Coolie
Bandhani
Fixing charges
Labour:
Stone mason (for plain work) 2nd class
Bandhani
Beldar
Coolie
Bhisti
Cutting sand stone slab thick by mechanical
device
Scaffolding
Mortar for laying and pointing
(Rate as per item No. 3.8 of SH.Mortar)
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 1 sqm.
Say
260
Unit
Day
Day
Day
Day
metre
Quantity
0.336
0.336
0.336
0.336
4
Rate
138.45
135.25
135.25
138.45
6.00
Amount
46.52
45.44
45.44
46.52
24.00
L.S.
cum
19.76
0.018
1.00
3 169.60
19.76
57.05
919.87
9.20
929.07
139.36
1 068.43
1 068.45
Quantity
Rate
Amount
10 cudm
tonne
L.S.
39.99
0.092
26.91
50.00
47.29
1.00
199.95
4.35
26.91
Day
Day
Day
Day
Day
1.35
0.032
0.224
0.112
0.224
141.60
151.50
135.25
135.25
138.45
191.16
4.85
30.30
15.15
31.01
Day
Day
Day
Day
Day
metre
0.448
0.336
0.336
0.336
0.336
4.00
141.60
138.45
135.25
135.25
138.45
6.00
63.44
46.52
45.44
45.44
46.52
24.00
L.S.
cum
19.76
0.018
1.00
3 169.60
19.76
57.05
851.85
8.52
860.37
129.06
989.43
989.45
7.23 : Stone work (machine cut edges) for wall lining etc. (veneer w
with a grout of 12mm thick cement mortar 1:3 (1 cement : 3 c
pointing in white cement mortar 1:2 (1 white cement : 2 stone
admixture of pigment matching the stone shade : (To be secur
means of cramps which shall be paid for separately):
7.23.4 : White sand stone - Exposed face machine cut and table rubbe
7.23.4.1:70 mm thick.
Code
1161
2216
9999
0125
0102
0114
0115
0100
0125
0100
0114
0115
0101
1237
9999
Description
Stone work (machine cut edges) for wall lining etc. (veneer w
with a grout of 12mm thick cement mortar 1:3 (1 cement : 3 c
pointing in white cement mortar 1:2 (1 white cement : 2 stone
admixture of pigment matching the stone shade : (To be secur
means of cramps which shall be paid for separately):
7.23.4 White sand stone - Exposed face machine cut and table rubbe
7.23.4.2 60 mm thick.
7.23
Code
Description
Details of cost for 1 sqm.
MaterialsFinished work = 60 cudm.
Add wastage @ 33.3% = 20 cudm.
Total = 80 cudm.
261
Quantity
Rate
Amount
10 cudm
tonne
L.S.
93.33
0.215
26.91
50.00
47.29
1.00
466.65
10.17
26.91
Day
Day
Day
Day
Day
2.70
0.064
0.448
0.224
0.448
141.60
151.50
135.25
135.25
138.45
382.32
9.70
60.59
30.30
62.03
Day
Day
Day
Day
Day
0.448
0.336
0.336
0.336
0.336
141.60
138.45
135.25
135.25
138.45
63.44
46.52
45.44
45.44
46.52
metre
L.S.
cum
4.00
19.76
0.018
6.00
1.00
3 169.60
24.00
19.76
57.05
1396.84
13.97
1410.81
211.62
1622.43
1622.45
Quantity
Rate
Amount
Code
1161
2216
9999
0125
0102
0114
0115
0100
0125
0100
0114
0115
0101
1237
9999
Description
Cost of stone
Carriage of stone @ 2.30kg/cudm
Extra for using white cement
Dressing charges
Labour:
Stone mason (plane work) 2nd class
Blacksmith 1st class
Beldar
Coolie
Bandhani
Fixing charges
Labour:
Stone mason (for plain work) 2nd class
Bandhani
Beldar
Coolie
Bhisti
Cutting sand stone slab thick by mechanical
device
Scaffolding
(Rate as per item No. 3.8 of SH.Mortar)
Mortar for laying and pointing
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 1 sqm.
Say
Stone work (machine cut edges) for wall lining etc. (veneer w
with a grout of 12mm thick cement mortar 1:3 (1 cement : 3 c
pointing in white cement mortar 1:2 (1 white cement : 2 ston
admixture of pigment matching the stone shade : (To be secu
means of cramps which shall be paid for separately):
7.23.4 White sand stone - Exposed face machine cut and table rubbe
7.23.4.3 50 mm thick.
7.23
Code
1161
2216
9999
0125
0102
0114
0115
0100
Description
Details of cost for 1 sqm.
MaterialsFinished work = 50 cudm.
Add wastage @ 33.3% = 16.7 cudm.
Total = 66.7 cudm.
Cost of stone
Carriage of stone @ 2.30 kg/cudm.
Extra for using white cement
Dressing charges
Labour:
Stone mason (plane work) 2nd class
Blacksmith 1st class
Beldar
Coolie
Bandhani
Fixing charges
Labour:
262
Unit
10 cudm
tonne
L.S.
Quantity
80.00
0.184
20.91
Rate
50.00
47.29
1.00
Amount
400.00
8.70
26.91
Day
Day
Day
Day
Day
2.70
0.064
0.448
0.224
0.448
141.60
151.50
135.25
135.25
138.45
382.32
9.70
60.59
30.30
62.03
Day
Day
Day
Day
Day
metre
0.448
0.336
0.336
0.336
0.336
4.00
141.60
138.45
135.25
135.25
138.45
6.00
63.44
46.52
45.44
45.44
46.52
24.00
L.S.
19.76
1.00
19.76
cum
0.018
3169.60
57.05
1 328.72
13.29
1 342.01
201.30
1 543.31
1 543.30
Quantity
Rate
Amount
10 cudm
tonne
L.S.
66.7
0.153
26.91
50.00
47.29
1.00
333.50
7.24
26.91
Day
Day
Day
Day
Day
2.7
0.064
0.448
0.224
0.448
141.60
151.50
135.25
135.25
138.45
382.32
9.70
60.59
30.30
62.03
Code
0125
0100
0114
0115
0101
1237
9999
Description
Stone mason (for plain work) 2nd class
Bandhani
Beldar
Coolie
Bhisti
Cutting sand stone slab thick by mechanical
device
Scaffolding
Mortar for laying and pointing
(Rate as per item No. 3.8 of SH.Mortar)
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 1 sqm.
Say
263
Unit
Quantity
Rate
Amount
Day
Day
Day
Day
Day
metre
0.448
0.336
0.336
0.336
0.336
4.00
141.60
138.45
135.25
135.25
138.45
6.00
63.44
46.52
45.44
45.44
46.52
24.00
L.S.
cum
19.76
0.018
1.00
3169.60
19.76
57.05
1260.76
12.61
1 273.37
191.01
1 464.38
1 464.40
Stone work (machine cut edges) for wall lining etc. (veneer wo
with a grout of 12mm thick cement mortar 1:3 (1 cement : 3 co
pointing in white cement mortar 1:2 (1 white cement : 2 stone
admixture of pigment matching the stone shade : (To be secure
means of cramps which shall be paid for separately):
7.23.4 White sand stone - Exposed face machine cut and table rubbed
7.23.4.4 40 mm thick.
7.23
Code
1161
2216
9999
0125
0102
0114
0115
0100
0125
0100
0114
0115
0101
1237
1237
9999
Description
Details of cost for 1 sqm.
MaterialsFinished work = 40 cudm.
Add wastage @ 33.3% = 1,3.3 cudm.
Total = 53.3 cudm.
Cost of stone
Carriage of stone @ 2.30 kg/cudm.
Extra for using white cement
Dressing charges
Labour:
Stone mason (plane work) 2nd class
Blacksmith 1st class
Beldar
Coolie
Bandhani
Fixing charges
Labour:
Stone mason (for plain work) 2nd class
Bandhani
Beldar
Coolie
Bhisti
Cutting sand stone slab thick by mechanical
device
Cutting sand stone slab thick by mechanical
device
Scaffolding
Mortar for laying and pointing
(Rate as per item No. 3.8 of SH.Mortar)
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 1 sqm.
Say
Stone work (machine cut edges) for wall lining etc. (veneer wo
with a grout of 12mm thick cement mortar 1:3 (1 cement : 3 co
pointing in white cement mortar 1:2 (1 white cement : 2 stone
admixture of pigment matching the stone shade : (To be secure
means of cramps which shall be paid for separately):
7.23.4 White sand stone - Exposed face machine cut and table rubbed
7.23.4.5 30 mm thick.
7.23
Code
Description
Details of cost for 1 sqm.
MaterialsFinished work = 30 cudm.
264
Quantity
Rate
Amount
10 cudm
tonne
L.S.
53.30
0.123
26.91
50.00
47.29
1.00
266.50
5.82
26.91
Day
Day
Day
Day
Day
2.7
0.064
0.448
135.25
0.448
141.60
151.50
135.25
0.22
138.45
382.32
9.70
60.59
30.30
62.03
Day
Day
Day
Day
Day
metre
0.448
0.336
0.336
0.336
0.336
4.00
141.60
138.45
135.25
135.25
138.45
6.00
63.44
46.52
45.44
45.44
46.52
24.00
metre
4.00
6.00
24.00
L.S.
cum
19.76
0.018
1.00
3169.60
19.76
57.05
1216.34
12.16
1228.50
184.28
1412.78
1412.80
Quantity
Rate
Amount
Code
1161
2216
9999
0125
0102
0114
0115
0100
0125
0100
0114
0115
0101
1237
9999
Description
Add wastage @ 33.3% = 9.99 cudm.
Total = 39.99 cudm.
Cost of stone
Carriage of stone @ 2.30 kg/cudm.
Extra for using white cement
Dressing charges
Labour:
Stone mason (plane work) 2nd class
Blacksmith 1st class
Beldar
Coolie
Bandhani
Fixing charges
Labour:
Stone mason (for plain work) 2nd class
Bandhani
Beldar
Coolie
Bhisti
Cutting sand stone slab thick by mechanical
device
Scaffolding
Mortar for laying and pointing
(Rate as per item No. 3.8 of SH.Mortar)
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 1 sqm.
Say
7.24 : Extra for stone work (veneer work) curved on plan with a mean
exceeding 6 m.
Code
9999
Description
Details of cost for 10 cudm.
Labour and materials
TOTAL
Add 1% for water charges
TOTAL
Add l5% for contractors profit and overheads
Cost of 10 cudm.
Cost of 1 cum.
Say
7.25 :
Code
Description
Details of cost for one cramp
Materials:
Stainless steel cramp
12.4x10-6 x7850 = 0.097kg
Add wastage @ 10% = 0.010kg.
= 0.107 kg.
265
Unit
Quantity
Rate
Amount
10 cudm
tonne
L.S.
39.99
0.092
26.91
50.00
47.29
1.00
199.95
4.35
26.91
Day
Day
Day
Day
Day
2.70
0.064
0.448
0.224
0.448
141.60
151.50
135.25
135.25
138.45
382.32
9.70
60.59
30.30
62.03
Day
Day
Day
Day
Day
metre
0.448
0.336
0.336
0.336
0.336
4.00
141.60
138.45
135.25
135.25
138.45
6.00
63.44
46.52
45.44
45.44
46.52
24.00
L.S.
cum
19.76
0.018
1.00
3169.60
19.76
57.05
1 124.32
11.24
1 135.56
170.33
1 305.89
1 305.90
Quantity
Rate
Amount
L.S.
8.97
1.00
8.97
8.97
0.09
9.06
1.36
10.42
1042.00
1042.00
Quantity
Rate
Amount
Code
7339
9999
9999
Description
Stainless steel cramp
Carriage
CM. 1:2 (lcement :2 Coarse sand).
(Rate as per this No. 3.7)
Labour iorfixing m position
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost for 0.097 kg.
Cost per kg
Say
Description
Details of cost for one dowel
Cost of stone including carriage
Labour for dressing dowel cutting chase and
fixing etc.
Labour for dressing dowel cutting chase and
fixing etc.
CM. 1:2 (1cement: 2 coarse sand).
( Rate as per items No. 3.7)
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of each dowel
Say
7.27 : Providing and fixing copper pins 7.5 cm long 6 mm diameter for
stones in stone wall lining in cement mortar 1:2(1 cement: 2 coa
making the necessary chases.
Code
0873
9999
9999
Description
Details of cost for one copper pinMaterialsCopper pins 6 mm dia 7.5 cm long
Labour for making pin in to required shape
and size, cutting chases in stone and fixing in
position
CM. 1:2 (1 cement: 2 coarse, sand).
Sundries including hire charges of hand cut
machine etc.
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of one copper pin
Say
266
Unit
Quantity
Rate
Amount
kilogram
L.S.
cum
0.107
3.90
0.001
280.00
1.00
3864.25
29.96
3.90
3.86
L.S.
6.50
1.00
6.50
44.22
0.44
44.66
6.70
51.36
529.48
529.50
Quantity
Rate
Amount
L.S.
9.10
1.00
9.10
L.S.
5.33
1.00
5.33
cum
0.0001
3864.25
3.86
18.29
0.18
18.47
2.77
21.24
21.25
Quantity
Rate
Amount
each
L.S.
1.00
3.90
7.50
1.00
7.50
3.90
cum
cum
0.001
0.001
3 864.25
1.00
3.86
1.95
17.21
0.17
17.38
2.61
19.99
20.00
1164
2216
0 125
1002
9999
9999
9999
0125
0114
9999
9999
Description
Details of cost for a chajja 2.00 sqm. (finished
work)
MaterialsRed sand stone slab 40mm (average
thickness)-Chisel dressed 80cm sloping length
plus 20cm bearing Area = 2.5xl.00=2.50sqm.
Cost of stone
Carriage @ 2.3kg/cudm.
Labour for dressing:
Mason (2nd class)
Anchoring steel bars 12mm dia. 45cm long 5
nos. @ 0.80kg/m = 0.02q
Cutting threads and cost of nuts, washers, etc.
Mortar for pointing 1:2(1 Cement: 2 Stone
dust) (Rate as per items no. 3.12)
Pigment
Extra cost of white cement
Labour:
Stone mason (Plain) 2nd class
Beldar
Scaffolding and sundries etc.
Brick cover support 4 courses with bricks of
class designation 75
4x7+5+5=38cm girth 2.5m length
=38cmx2.5m=95cm
Cost of Brick cover support.
Brick work in triangular gap above cover with
bricks of class designation 7.5 in cement
mortar 1:4-1/2x2.5x0.2x0.07=0.018cum.
(B) Rate as per Item no. 6.1.2 SH: Brick work.
TOTAL
Add for water charges @ 1% on all except
(B)
TOTAL
Add for contractors profit and overheads @
15% on all except (B)
Cost of 2 sqm.
Cost of 1 sqm.
Say
267
Unit
Quantity
Rate
Amount
sqm
tonne
2.75
0.253
120.00
47.29
330.00
11.96
Day
quintal
0.50
0.02
141.60
3100.00
70.80
62.00
L.S.
cum
67.34
0.009
1.00
3 959.25
67.34
35.63
L.S.
L.S.
6.24
26.91
1.00
1.00
6.24
26.91
Day
Day
L.S.
1.00
1.50
16.12
141.60
135.25
1.00
141.60
202.88
16.12
L.S.
104.00
1.00
104.00
cum
0.018
2121.75
38.19
1 113.67
10.75
1 124.42
162.93
1 287.35
643.68
643.70
Code
1165
2216
0125
1002
9999
9999
9999
0125
0114
9999
9999
Description
Details of cost for a chajja 2.00 sqm. (finished
work)
MaterialsWhite sand stone slab 40mm (average
thickness)-Chisel dressed 80cm sloping length
plus 20cm bearing Area = 2.5x1.00=2.50sqm.
Cost of stone
Carriage @ 2.3kg/cudm.
Labour for dressing:
Mason (2nd class)
Anchoring steel bars 12mm dia. 45cm long 5
nos. @ 0.80kg/m = 0.02q
Cutting threads and cost of nuts, washers, etc.
Mortar for pointing 1:2 (1 Cement: 2 Stone
dust)
Pigment
Extra cost of white cement
Labour:
Stone mason (Plain) 2nd class
Beldar
Scaffolding and sundries etc.
Brick cover support 4 courses with bricks of
class designation 75
4x7+5+5=38cm girth 2.5m length
=38cmx2.5m=95cm
Cost for Brick cover support .
Brick work in triangular gap above cover with
bricks of class designation 5 in cement mortar
1:4-1 /2x2.5x0.2x0.07=0.018cum.
(B) Rate as per Item no. 6.1.2 SH: Brick work.
TOTAL
Add for water charges @ 1% on all except
(B)
TOTAL
Addfor contractors profit and overheads @
1 15% on all except (B)
Cost of 2 sqm.
Cost of 1 sqm.
Say
268
Unit
Quantity
Rate
Amount
sqm
tonne
2.75
0.253
140.00
47.29
385.00
11.96
Day
quintal
0.50
0.02
141.60
3100.00
70.80
62.00
L.S.
cum
25.90
0.009
1.00
3 959.25
67.34
35.63
L.S.
L.S.
6.24
26.91
1.00
1.00
6.24
26.91
Day
Day
L.S.
1.00
1.50
16.12
141.60
135.25
1.00
141.60
202.88
16.12
L.S.
104.00
1.00
104.00
cum
0.018
2121.75
38.19
1 168.67
11.30
1 179.97
171.27
1 351.24
675.62
675.60
1164
2216
0125
9999
9999
9999
0125
0114
9999
Description
Details of cost for (2.5xO.75m) 1.875 sqm.
MaterialsTaking 2.5mx75cm projection + 15cm bearing
= 2.5x0.9 = 2.25 sqm.
Cost of stone
Carriage @ 2.3kg/cudm.
Labour for dressing:
Mason (2nd class) for stone work
Mortar for pointing 1:2
Pigment
Extra cost of white cement
Labour:
Mason (2nd class)
Beldar
Scaffolding and sundries etc.
TOTAL
Add for water charges @ 1%
TOTAL
Add for contractors profit and overheads @
15%
Cost of 1.875 sqm.
Cost of 1 sqm.
Say
1165
2216
0125
9999
9999
9999
0125
0114
9999
Description
Details of cost for (2.5xO.75m) 1.875 sqm.
MaterialsTaking 2.5mx75cm projection + 15cm bearing
= 2.5x0.9 = 2.25 sqm.
White sand stone slab 40 mm thick
(un-dressed)
Carriage @ 2.3kg/cudm.
Labour for dressing:
Mason (2nd class) for stone work
Mortar for pointing 1:2
Pigment
Extra cost of white cement
Labour:
Mason (2nd class)
Beldar
Scaffolding and sundries etc.
TOTAL
Add for water charges @ 1 %
TOTAL
269
Unit
Quantity
Rate
Amount
sqm
tonne
2.25
.227
120
47.29
270
10.73
Day
L.S.
L.S.
L.S.
.45
53.82
6.24
26.91
141.6
1
1
1
63.72
53.82
6.24
26.91
Day
Day
L.S.
.6
.8
13.52
141.6
135.25
1
84.96
108.2
13.52
638.1
6,38
644.48
96.67
741.15
395.28
395.3
Unit
Quantity
Rate
Amount
sqm
2.25
140.00
315.00
tonne
0.227
47.29
10.73
Day
L.S.
L.S.
L.S.
0.45
53.82
6.24
26.91
141.60
1.00
1.00
1.00
63.72
53.82
6.24
26.91
Day
Day
L.S.
0.60
0.80
1.00
141.60
135.25
13.52
84.96
108.20
13.52
683.10
6.83
689.93
Code
Description
Add for contractors profit and overheads @
15%
Cost of 1.875 sqm.
Cost of 1 sqm.
Say
7.30 :
Code
Description
Detail of cost for window 1.6m length and
0.70m width = 1.12 sqm.
Materials:
Red stone slab (chisel dressed) 30mm average
thickness overall width 0.70+0.15=0.85
metres
Total area = 1.6x0.85=1.36sqm.
Red stone brackets (chisel dressed) 30mm
average thickness over all width of brackets
0.53+0.23=0.76m
2x0.3x0.76=0.46
Total 1.36+0.46 =1.82sqm.
Add wastage @10% = 0.18sqm.
Total = 2.00 sqm.
carriage
Cement mortar 1 :4
Labour for dressing and fixing
Stone mason (plainy2nd class
Beldar
TOTAL
Add for water charges @ 1 %
TOTAL
Add for contractors profit and overheads @
15%
Cost for 1.12 sqm.
Cost of 1 sqm.
Say
1166
2216
9999
0125
0114
7.31 :
Code
Description
Details of cost for 1 bracket
Quantity of stone for 1 bracket
1 x 55 x 22.5 x 45cm = 0.056cum or 56 cudm.
Red sand stone = 56 cudm.
Add wastage 10% = 5.6 cudm.
Total =61.6 cudm.
Cost of stone
Carriage @ 2.3kg/ cudm.
Dressing charges
LABOUR
Stone mason (plain work) 2nd class
Blacksmith 1st class
1160
2216
0125
0102
270
Unit
Quantity
Rate
Amount
103.49
793.42
423.16
423.15
Quantity
Rate
Amount
sqm
tonne
L.S.
2.00
0.14
13.52
97.00
47.29
1.00
194.00
6.62
13.52
Day
Day
0.86
0.50
141.60
135.25
121.78
67.62
403.54
4.04
407.58
61.14
468.72
418.50
418.50
Quantity
Rate
Amount
10 cudm
tonne
61.60
0.14
45.00
47.29
277.20
6.62
Day
Day
1.7926
0.037
141.60
151.50
253.83
5.61
Code
0114
0115
0100
0373
0125
0102
0114
0115
0101
0101
9999
9999
0126
Description
Beldar
Coolie
Bandhani
Cost of Gun metal cramps 25x6mm x30 cm
long
Fixing charges
Labour
stone mason (plain work) 2nd class
Blacksmith 1st class
Beldar
Coolie
Bandhani
Bhisti
Scaffolding
Mortar for laying and pointing
Extra labour for ornamental finish :
Stone mason (ornamental)
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractor s profit and
overheads
Cost for 1 Bracket
Say
7.32 : Stone work, plain in copings, cornices, string courses and plinth c
mm thick in Cement mortar 1:6 (1 cement : 6 coarse sand) includi
white cement mortar 1:2 (1 white cement : 2 stone dust) with an
matching the stone shade.
7.32.1: Red sand stone
Code
9999
0125
0114
Description
Details of cost for cornices (30cm long 30cm
deep and 7.5cm project-iron) = 6.75cudm.
Materials:
Stone work plain ashlar cyclopean
3x3x0.75 - 6.75 cudm
Rate as per item no 7.12.1.1 of SH : Stone
Work
(A) Extra for using white cement
Extra labour for making the cornices
(A) Stone mason (2nd class)
(A) Beldar
TOTAL
(B) Add for water charges @ 1 % on A
TOTAL
Add for contractors profit and overheads @
15% on (A+B)
Cost of 6.75 cudm.
Cost per cum.
Say
271
Unit
Quantity
Rate
Amount
Day
Day
Day
each
0.271
0.1355
0.271
4
135.25
135.25
138.45
53.00
36.65
18.33
37.52
212.00
Day
Day
Day
Day
Day
Day
L.S.
L.S.
0.2464
0.0336
0.1232
0.1232
0.1232
0.1232
15.29
45.14
141.60
151.50
135.25
135.25
138.45
138.45
1.00
1.00
34.89
5.09
16.66
16.66
17.06
17.06
15.29
45.14
Day
0.95
151.50
143.92
1 159.53
11.60
1 171.13
175.67
1 346.80
1 346.80
Unit
Quantity
Rate
Amount
1000 cudm
6.75
14154.00
95.54
L.S.
5.33
1.00
5.33
Day
Day
0.07
0.07
141.60
135.25
9.91
9.47
120.25
0.25
120.50
3.74
124.24
18 405.93
18 406.00
7.32 : Stone work, plain in copings, cornices, string courses and plin
mm thick in Cement mortar 1:6 (1 cement : 6 coarse sand) inc
white cement mortar 1:2 (1 white cement : 2 stone dust) with
pigment matching the stone shade.
7.32.2 : White sand stone
Code
9999
0125
0114
Description
Details of cost for cornices (30cm long 30cm
deep and 7.5cm project-iron) = 6.75cudm.
Materials:
Stone work plain ashlar cyclopean
3x3x0.75 = 6.75 cudm
Rate as per item no 7.12.1.2 of SH : Stone Work
(A) Extra for using white cement
Extra labour for making the cornices
(A) Stone mason (2nd class)
(A) Beldar
TOTAL
Add for water charges @ 1 % on A
TOTAL
Add for contractors profit and overheads @
15 % on (A+B)
Cost of 6.75 cudm.
Cost per cum.
Say
7.33 : Providing and fixing stone jali 40mm thick throughout in cem
cement : 3 coarse sand) including pointing in white cement m
cement: 2 stone dust) with an admixture of pigment, matchin
slab without any chamfers etc.
7.33.1 : Red sand stone
Code
1164
2216
0125
0114
9999
Description
Details of cost for lsqmMaterials:
Red sand stone slab 40mm=1.00 sqm
Add 10% wastage Total =0.10/1.10
Red sand stone slab 40mm
Carriage of stone slab
Labour:
For making, dressing and fixing
Mason (plain) 2nd class
Beldar
Mortar and Sundries
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 1 sqm.
Say
272
Unit
Quantity
Rate
Amount
1000cudm
L.S.
6.75
5.33
14929.00
1.00
100.77
5.33
Day
Day
0.07
0.07
141.60
135.25
9.91
9.47
125.48
0.25
125.73
3.74
129.47
19180.74
19181.00
Unit
Quantity
Rate
Amount
sqm
tonne
1.10
0.101
120.00
47.29
132.00
4.78
Day
Day
L.S.
12.70
8.45
80.73
141.60
135.25
1.00
1 798.32
1 142.86
80.73
3 158.69
31.59
3 190.28
478.54
3 668.82
3 668.80
7.33 : Providing and fixing stone jali 40mm thick throughout in cem
cement : 3 coarse sand) including pointing in white cement mo
cement: 2 stone dust) with an admixture of pigment, matching
slab without any chamfers etc.
7.33.2 : White sand stone
Code
1165
2216
0125
0114
9999
Description
Details of cost for lsqmMaterials:
White sandstone slaJx40mm = 1.00 sqm
Add 10% wastage Total =0.10/1.10 sqm
White sand stone slab 40mm
Carriage of stone slab
Labour:
For making, dressing and fixing
Mason (plain) 2nd class
Beldar
Mortar and Sundries
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 1 sqm.
Say
7.34 : Extra for laying stone work in or under water and/or liquid mud
pumping or bailing out water and removing slush etc. complet
Code
0011
0114
Description
Details of cost for depth of water 0.30m.
Quantity of concrete = 14 cum.
pumping hours = 3 hrs. on 0.375day.
Beldar for cleaning slush
TOTAL
Add 1 % for water charges
TOTAL
Add for contractors profit and overheads
15%
Cost of 14cum. per 0.30m depth
Cost of cum. per m depth
Say
0123
0124
0114
0115
Description
Details of cost for 1 cum.
Extra labour due to slow progressMason 1st class
Mason 2nd class
Beldar
Coolie
TOTAL
Add 1% for water charges
TOTAL
Add for contractors profit and overheads
15%
Cost for 1 cum.
Say
273
Unit
Quantity
Rate
Amount
sqm
tonne
1.100
0.101
140.00
47.29
154.00
4.78
Day
Day
L.S.
12.70
8.45
80.73
141.60
135.25
1.00
1 798.32
1 142.86
80.73
3 180.69
31.81
3 212.50
481.88
3 694.38
3 694.40
Quantity
Rate
Amount
Day
Day
0.375
4.00
300.00
135.25
112.50
541.00
653.50
6.54
660.04
99.01
759.05
180.73
180.75
foul position.
Unit
Quantity
Rate
Amount
Day
Day
Day
Day
0.02
0.02
0.25
0.15
151.50
141.60
135.25
135.25
3.03
2.03
33.81
20.29
59.96
0.60
60.56
9.08
69.64
69.65
7.36 :
Wall lining butch work upto 10.00m height with Dholpur ston
facing on the exposed surface with stone strips of minimum le
required width including embedding every tenth layer and bot
masonry or concrete after making necessary chases of size 75
providing layer of 75mm thick strips i/c 12mm thick bed of cem
(1 Cement : 3 coarse sand) i/c ruled pointing in cement mortar
2 stone dust) with an admixture of pigment to match the shad
per direction of Engineer-in-charge.
Code
Description
Details of cost for lsqm.
Dholpur stone 40mm thick
Wall face = l.OOsqm.
Deduct for embed within 3x0.04x0.10=0.12 sqm
= 0.88sqm.
Add wastage 5% = 0.04sqm.
Total = 0.92 sqm.
Cost of stone
75mm thick 3x0.04x1.0 = 0.12 sqm.
Add wastage 5% = 0.01 sqm.
Total =0.13 sqm.
Cost of stone
Carriage of stone
0.92x0.04 =0.0368 cum.
0.13x0.075 =0.0100 cum.
= 0.0468 cum. or 468 cudm.
468 cudm @ 2.3 kg/cudm = 108 kg = 0.108
tonne
Carriage of stone
Cutting stips of stone and giving rough finish
assuming 50mm thick strips 20x1.0 = 20
metre
Mortar with coarse sand 1:3 for
(a) stone backing 12mm thick = 0.0144 cum.
(b) for fixing of stone = 0.40/25 - 0.0160 cum.
Total = 0.0304 cum.
Cement Mortar (Rate as per items No. 3.8)
Cutting chases and making good with mortar
after insurting stone etc.
(A) Rate as per item no. 18.78 of S.H
Miscellaneous
White cement and pigment for pointing
Labour:
Mason 1 st class
Mason 2nd class
Beldar
Bhisti
Sundries and scaffolding brushes etc.
TOTAL
Add for water charges @ 1% on all except A
TOTAL
Add for contractors profit and overheads @
15% on all except A
Cost of 1 sqm.
Say
1165
1163
2216
1237
9999
0126
0125
0114
0101
9999
274
Quantity
Rate
Amount
sqm
0.92
140.00
128.80
sqm
0.13
256.00
33.28
tonne
metre
0.108
20.00
47.29
6.00
5.11
120.00
cum
0.03
3 169.60
96.36
metre
3.00
36.65
109.95
L.S.
40.43
1.00
40.43
Day
Day
Day
Day
L.S.
0.25
0.25
0.50
0.03
26.91
151.50
141.60
135.25
138.45
1.00
37.88
35.40
67.62
4.15
26.91
705.89
5.96
711.85
90.28
802.13
802.15
7.37 :
Stone work ( machine cut edges) for wall lining upto 10 m heigh
work) backing filled with a grout of 12mm thick cement mortar
coarse sand) and jointed with Cement mortar 1:2 (1 cement : 2
rubbing and polishing complete. (To be secured to the backing
which shall be paid for separately)
1169
2216
9999
0125
0114
0115
0139
9999
Description
275
ed and rubbed.
Unit
Quantity
Rate
Amount
Sqm.
tonne
cum
11.50
0.67
0.144
150.00
47.29
3169.60
1725.00
31.68
456.42
L.S.
40.43
1.00
40.43
Day
Day
Day
Day
L.S.
6.50
6.50
4.33
10.80
111.54
141.60
135.25
135.25
138.45
1.00
920.40
879.12
581.57
1495.26
111.54
6241.42
62.41
6303.83
945.57
7249.40
724.94
724.95
Stone tile work for wall lining upto 10 m height with special a
thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) inc
white cement with an admixture of pigment to match the ston
7.38.1 8mm thick (mirror polished and machine cut edge)
7.38.1.1 Granite stone of any colour and shade.
7.38
Code
2750
9999
0367
9999
0123
9999
9999
7.38:
Description
Stone tile work for wall lining upto 10 m height with special a
thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) inc
white cement with an admixture of pigment to match the ston
7439
9999
0367
9999
0123
0114
9999
9999
Description
Details of cost for 10 sqm.
Materials :
8mm thick Raj Nagar white stone tile =
10.00sqm.+Add 2.5% westage = 0.25 sqm
Total = 10.25sqm.
Carriage of Raj Nagar white stone tiles
Cement mortar 1:3
(Rate as per item 3.8 of S.H. mortar)
Cement slurry @ 3.3 kg/sqm.
Mortar for pointing in white cement
Labour for placing and fixing :
Mason 1st class
Beldar
Granular sand particles mixed with araldite to
be pasted on each side to form interlocking
arrangement with cement plaster
Sundries
276
Quantity
Rate
Amount
sqm
L.S.
cum
10.25
40.04
0.14
555.00
2.60
3169.60
5688.75
40.04
443.74
tonne
L.S.
0.03
25.74
4500.00
10.00
148.50
25.74
Day
Day
L.S.
7.70
7.70
260.00
151.50
135.25
1.00
1166.55
1041.42
260.00
L.S.
171.60
1.00
171.60
8986.34
89.86
9076.20
1361.43
10437.63
1043.76
1043.75
Quantity
Rate
Amount
sqm
L.S.
cum
10.25
40.04
443.74
430.00
1.00
3169.60
4 407.50
40.04
tonne
L.S.
0.03
25.74
4500.00
1.00
148.50
25.74
Day
Day
L.S.
7.70
7.70
260.00
151.50
135.25
1.00
1 166.55
1 041.42
260.00
L.S.
171.60
1.00
171.60
277
Code
Description
TOTAL
Add 1 % for water charges
TOTAL
Add 15%for contractors profit and overheads
Cost for 10 sqm.
Cost of 1 sqm.
Say
7.39
Extra for stone work for wall lining on exterior walls of heigh
ground level for every additional height of 3 m or part there
Code
Description
ANALYSIS SAME AS ITEM NO 13.114
Detail of cost for 10 sqm
MATERIALS
Scaffolding
Hire charges of pumpset of capacity
4000 it/per hour
Mason 1st class
Belder
Bhisti
Sundries
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 10.00 sqm
Cost of 1.00 sqm
Say
9999
0011
0123
0114
0101
9999
7.40
7.40.1
Code
8683
1237
0016
9999
9999
9999
0126
Unit
Unit
L.S.
Day
Day
Day
Day
L.S.
Quantity
Rate
Amount
7 705.09
77.05
7 782.14
1 167.32
8 949.46
894.95
894.95
215.28
0.375
0.30
0.30
0.15
28.60
Rate
Amount
1.00
300.00
215.28
112.50
151.50
151.50
138.45
1.00
45.45
45.45
20.77
28.60
350.67
3.51
354.18
53.13
4.7.31
40.73
40.75
Quantity
4.35
10.00
0.215
30.68
153.40
204.75
2.00
Rate
Amount
325.00
6.00
1413.75
60.00
47.29
1. 00
1. 00
1.00
151.50
10.17
30.68
153.40
204.75
303.00
Code
0114
0114
9999
0116
0114
9999
9999
7.40
7.40.2
Code
8684
1237
9999
9999
9999
0126
0114
0114
9999
0116
0114
9999
9999
Description
Beldar
Labour for lifting stone
Beldar
Silicon gun/ pump etc.
Labour for sealing
Fitter (grade 1)
Beldar
Sundries
Rubing and polishing vertical surface of stone
cladding
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 3 sqm
Cost of 1 sqm
Say
Description
Details of cost for 3 sqm.
MaterialsWhite sand stone = 3.00sqm
Add wastage 25% = 0.75 sqm =3.75 sqm.
Add 20% wastage infixing due to broken edge
= 0.60 sqm
Total = 4.35 sqm
White sand stone gang saw cut 30mm thick.
Cutting marble or sand stone slab upto 50 mm
thick by mechanical device
Carriage of stone @ 2.30kg/cudm
backing rod
Fixing including weather sealant and removing
Double scafolding
Mason (for ornamental stone work) 1st class
Beldar
Labour for lifting stone
Beldar
Silicon gun/ pump etc.
Labour for sealing
Fitter (grade 1)
Beldar
Sundries
Rubing and polishing vertical surface of stone
cladding
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 3 sqm
Cost of 1 sqm
Say
278
Unit
Day
Quantity
4.00
Rate
135.25
Amount
541.00
Day
L.S.
1.00
204.75
135.25
1.00
135.25
204.75
Day
Day
L.S.
L.S.
0.25
0.50
204.75
51.22
151.50
135.25
1.00
1.00
37.88
67.62
204.75
51.22
3 418.22
34.18
3 452.40
517.86
3 970.26
1 323.42
1 323.40
Unit
Quantity
Rate
Amount
sqm
metre
4.35
10.00
360.00
6.00
1 566.00
60.00
tonne
L.S.
L.S.
L.S.
Day
Day
0.215
30.68
153.40
204.75
2.00
4.00
47.29
1.00
1.00
1.00
151.50
135.25
10.17
30.68
153.40
204.75
303.00
541.00
Day
L.S.
1.00
204.75
135.25
1.00
135.25
204.75
Day
Day
L.S.
L.S
0.25
0.50
204.75
51.22
151.50
135.25
1.00
1.00
37.88
67.62
204.75
51.22
3 570.47
35.70
3 606.17
540.93
4 147.10
1 382.37
1 382.35
7.41
Code
Description
4009
1007
0123
0124
0114
1215
0102
0100
0114
279
Quantity
Rate
Amount
Kilogram
51.47
38.00
1955.86
quintal
0.462
3100.00
1432.20
cum
0.054
3257.45
175.90 (A)
Day
Day
Day
0.26
0.26
2.00
151.50
141.60
135.25
39.39
36.82
270.50
cum
560.00
1.00
560.00
Day
Day
Day
1.34
0.67
4.92
151.50
138.45
135.25
203.01
92.76
665.43
Code
9999
9999
Description
Sundries
Painting with epoxy paint over and including
priming coat area 22.80x0.15 = 3.42
12x0.2=2.40
Total = 5.82sqm
(Rate as per Item no. 13.52.1 of SH:
Finishing.)
For labour scaffocaling etc
Total
Add 1 % for water charges except on (A)
Total
Add 15% for contractors profit and overheads
except on (A)
Cost for 88.79 kg
Cost for 1 kg
Say
7.42
Code
Description
Details of cost for 10 Nos.
Stainless steel cramps with nuts, bolts and
washer for dry stone cladding .
LABOUR
for making holes, recesses etc. and fixing
of stainless stul cramps
Blacksmith 2nd class
Mason 2nd class
Beldar
Scaffolding, hire charges of drill machine etc.
Sundries
Total
Add 1% for water charges.
Total
Add 10% for contractors profit and overheads
charges.
Cost for 10 Nos.
Cost for 1 Nos.
Say
8698
0103
0124
0114
9999
9999
280
Unit
L.S.
Quantity
31.05
Rate
2.60
Amount
80.73
sqm
5.82
75.25
437.96(A)
L.S.
31.05
2.60
80.73
6257.65
56.44
6314.09
855.03
7169.12
80.74
80.75
Quantity
Rate
Amount
each
10.00
200.00
2000.00
Day
Day
Day
L.S.
L.S.
0.10
1.00
1.10
20.80
20.80
141.60
141.60
135.25
1.00
1.00
14.16
141.60
148.78
20.80
20.80
2346.14
23.46
2369.60
355.44
2725.04
272.50
272.50
SUB HEAD :
MARBLE W
281
UB HEAD : 8.0
ARBLE WORK
8.1
Marble work gang saw cut (polished and machine cut) of thickn
lining (veneer work) in cement mortar 1:3 (1 cement : 3 coarse
pointing with white cement mortar 1:2 (1 white cement : 2 marb
admixture of pigment to match the marble shade: (To be secure
means of cramps, which shall be paid for separately).
Raj Nagar Plain white marble/ Udaipur green marble/ Zebra blac
8.1.1
8.1.1.1 Area of slab upto 0.50 sqm
Code
7452
2216
0126
0100
0114
0115
0 101
0128
0102
9999
8.1
Description
Marble work gang saw cut (polished and machine cut) of thickne
lining (veneer work) in cement mortar 1:3 (1 cement : 3 coarse s
with white cement mortar 1:2 (1 white cement : 2 marble dust)
pigment to match the marble shade: (To be secured to the backi
cramps, which shall be paid for separately).
Raj Nagar Plain white marble/ Udaipur green marble/ Zebra blac
8.1.1
8.1.1.2 Area of slab over 0.50 sqm
Code
7453
2216
2112
Description
Details of cost for 1.00 sqm.
Finished work = 1.00sqm.+
Add for wastage @ 20% = 0.20 sqm.
Total = 1.20sqm.
Raj Nagar plain white marble (Polished and
machine cut) 18 mm thick above 0.50 sqm
Carriage of marble
Cement mortar 1:3 (Cement: 3 Coarse sand)
(Rate as per item No. 3.8)
283
Quantity
Rate
Amount
sqm
0.60
540.00
324.00
tonne
cum
0.03
0.008
47.29
3169.60
1.42
25.36
cum
0.0012
7590.25
9.11
Day
Day
Day
Day
Day
Day
Day
L.S.
0.335
0.335
0.335
0.335
0.335
0.165
0.135
13.39
151.50
138.45
135.25
135.25
138.45
138.45
151.50
1.00
50.75
46.38
45.31
45.31
46.38
22.84
20.45
13.39
650.70
6.51
657.21
98.58
755.79
1 511.58
1 511.60
Quantity
Rate
Amount
sqm
1.20
580.00
696.00
tonne
cum
0.06
0.0144
47.29
3169.60
2.84
45.64
Code
0126
0100
0114
0115
0101
0 128
0102
9999
Description
whitecement mortar 1:2 (1 white cement: 2
marble dust) (Rate as per item No. 3.13)
Labour:
For fixing
Stone Mason (ornamental)
Bandhani
Beldar
Coolie
Bhishti
Mate
Blacksmith 1st class
Scaffolding
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost for 1.00 sqm
Say
Providing and fixing 18mm thick gang saw cut mirror polished
prepolished) machine cut for kitchen platforms, vanity counter
and similar locations of required size of approved shade, colou
over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse
treated with white cement, mixed with matching pigment, epo
rubbing, curing moulding and polishing to edge to give high gl
at all levels.
8.2.1 Raj Nagar Plain white marble/ Udaipur green marble/ Zebra bla
8.2.1.1 Area of slab upto 0.50 sqm.
8.2
Code
Description
Details of cost for 0.50 sqm.
Mirror polished Abu plain white = 0.50
sqm.+Wastage 5% 0.025 sqm. = 0.525 sqm
7452
0123
0114
0115
9999
9999
284
Unit
cum
Quantity
0.0025
Rate
7590.25
Amount
18.98
Day
Day
Day
Day
Day
Day
Day
L.S.
0.67
0.67
0.67
0.67
0.67
0.33
0.27
26.91
151.50
138.45
135.25
135.25
138.45
138.45
151.50
1.00
101.51
92.76
90.62
90.62
92.76
45.69
40.90
26.91
1345.23
13.45
1358.68
203.80
1562.48
1562.50
Quantity
Rate
Amount
sqm
0.525
540.00
283.50
cum
0.012
2578.45
30.94
Day
Day
Day
L.S.
L.S.
0.70
0.325
0.325
39.00
16.25
151.50
135.25
135.25
1.00
1.00
106.05
43.96
43.96
39.00
16.25
563.66
5.64
569.30
85.40
654.70
1309.40
1309.40
Providing and fixing 18mm thick gang saw cut mirror polished
prepolished) machine cut for kitchen platforms, vanity counter
and similar locations of required size of approved shade, colou
over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse
treated with white cement, mixed with matching pigment, epo
rubbing, curing moulding and polishing to edge to give high gl
at all levels.
8.2.1 Raj Nagar Plain white marble/ Udaipur green marble/ Zebra bla
8.2.1.2 Area of slab over 0.50 sqm.
8.2
Code
Description
7453
0123
0114
0115
9999
9999
Providing and fixing 18mm thick gang saw cut mirror polished
prepolished) machine cut for kitchen platforms, vanity counter
and similar locations of required size of approved shade, colou
over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse
treated with white cement, mixed with matching pigment, epo
rubbing, curing moulding and polishing to edge to give high gl
at all levels.
8.2.2 Granite of any colour and shade
8.2.2.1 Area of slab upto 0.50 sqm
8.2
Code
7295
0123
0114
0115
9999
Description
Details of cost for 0.50 sqm.
Mirror polished granite= 0.50 sqm.+Wastage
5% 0.025 sqm.= 0.525 sqm
Granite 18 mm thick slab, upto 0.50 sqm
awise)
Cement mortar 1:4 (1 cement: 4 coarse
sand). (Rate as per item No. 3.9)
Labour:
Mason (brick layer) 1st class
Beldar
Coolie
Moulding and edge polishing
285
Quantity
Rate
Amount
sqm
1.05
580.00
609.00
cum
0.024
2578.45
61.88
Day
Day
Day
L.S.
L.S.
1.40
0.65
0.65
78.00
32.50
151.50
135.25
135.25
1.00
1.00
212.10
87.91
87.91
78.00
32.50
1169.30
11.69
1180.99
177.15
1358.14
1358.15
Unit
Quantity
Rate
Amount
sqm
0.525
1500.00
787.50
cum
0.012
2578.45
30.94
Day
Day
Day
L.S.
0.70
0.325
0.325
39.00
151.50
135.25
135.25
1.00
106.05
43.96
43.96
39.00
Code
9999
Description
Sundries apoxy resin & cutting machine etc.
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost for 0.50 sqm.
Cost for 1.00 sqm
Say
Providing and fixing 18mm thick gang saw cut mirror polished
prepolished) machine cut for kitchen platforms, vanity counter
and similar locations of required size of approved shade, colou
over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse
treated with white cement, mixed with matching pigment, epo
rubbing, curing moulding and polishing to edge to give high gl
at all levels.
8.2.2 Granite of any colour and shade
8.2.2.2 Area of slab over 0.50 sqm.
8.2
Code
7297
0123
0114
0115
9999
9999
Description
Code
0019
0114
9999
Description
Details of cost for 10.00 m
Labour:
Hand Grinder for-mirror-polish
Beldar
Sundries Blades & Polished etc.
TOTAL
Add 1 % for water charges
TOTAL
286
Unit
L.S.
Quantity
16.25
Rate
1.00
Amount
16.25
1067.66
10.68
1078.34
161.75
1240.09
2480.18
2480.20
Unit
Quantity
Rate
Amount
sqm
cum
2.10
0.03
1 615.00
2578.45
3 391.50
69.62
Day
Day
Day
L.S.
L.S.
2.80
1.30
1.30
39.00
16.25
151.50
135.25
135.25
1.00
1.00
424.20
175.82
175.82
78.00
65.00
4379.96
43.80
4423.76
663.56
5087.32
2543.66
2543.65
Unit
Quantity
Rate
Amount
Day
Day
L.S.
1.50
3.50
78.00
100.00
135.25
1.00
150.00
270.50
78.00
498.50
4.99
503.49
Code
Description
Add 15% for contractors profit and overheads
Cost for 10 metre
Cost per metre
Say
8.3
8.3.2
Code
0019
0114
9999
Description
Details of cost for 10.00 m
Labour:
Hand Grinder for mirror polish
Beldar
Sundries Blades & Polish etc.
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost for 10 metre
Cost per metre
Say
8.4
Extra for fixing marble /granite stone over and above corresp
facia and drops of width upto 150 mm with epoxy resin based
cleaning etc. complete.
Code
Description
Details of cost for facia 1.5m long and 0.15m
wide
Labour:
Mason 1st class
Beldar
Scaffolding, expoxy etc.
Cement mortar 1:4 (1 Cement: 4 Coarse sand)
(Rate as per item No. 3.9)
1.5x0.15x0.02 = 0.005 cum.
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost for 10 metre
Cost per metre
Say
0123
0115
9999
8.5
Extra for providing opening of required size & shape for wash
in kitchen platform, vanity counters and similar location in m
work including necessary holes for pillar taps etc. including r
of cut edges etc. complete.
Code
Description
Details of cost for providing one opening of
required size and shape.
Labour:
Mason (for ornamental stone work) 1st class
0126
287
Unit
Quantity
Rate
Amount
75.52
579.01
57.90
57.90
Unit
Quantity
Rate
Amount
Day
Day
L.S.
2.50
3.50
117.00
100.00
135.25
1.00
250.00
117.00
117.00
840.38
8.40
848.78
127.32
976.10
97.61
97.60
Quantity
Rate
Amount
Day
Day
L.S.
cum
0.30
0.30
39.00
0.005
151.50
135.25
1.00
2578.45
45.45
40.57
39.00
12.89
137.91
1.38
139.29
20.89
160.18
106.79
106.80
Quantity
Rate
Amount
Day
0.40
151.50
60.60
Code
0114
Description
Beldar
Sundries
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost per opening
Say
8.6
Code
Description
Details of cost for 10 sqm.
Labour:
Floor grinder machine (Granite)
Beldar
Bhishti
Sundries grease, mop grinding stones etc.
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost for 10 sqm.
Cost per sqm.
Say
0013
0114
0101
9999
8.7
8.7.1
Code
7338
9999
9999
= 13.8x10-6
Less hole
0.024x0.010x0.006 = (-) 1.4x 10-6
12.4x10-6
12.4x10-6 x 8640 = 0.107kg+
= Add wastage @ 10% = 0.011 kg.
= 0.118 kg.
Gun metal cramp
Carriage
Cement montar 1:2 (1 cement: 2 coarse sand).
(Rate as per item No. 3.7)
Labour for fixing in position
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost for 0.107 kg.
Cost per kg
Say
288
Unit
Day
L.S.
Quantity
0.40
15.30
Rate
135.25
1.00
Amount
54.10
15.30
130.00
1.30
131.30
19.70
151.00
151.00
Quantity
Rate
Amount
Day
Day
Day
L.S.
1.00
2.50
1.50
65.00
200.00
135.25
138.45
1.00
200.00
338.12
207.68
65.00
810.80
8.11
818.91
122.84
941.75
94.18
94.20
Quantity
Rate
Amount
Kg.
L.S.
cum
0.118
3.90
0.001
270.00
1.00
3864.25
31.86
3.90
3.86
L.S.
6.50
1.00
6.50
46.12
0.46
46.58
6.99
53.57
500.65
500.65
Code
7339
9999
9999
8.8
Description
Details of cost for one cramp
Materials:
Stainless steel cramp
12.4x10-6 x7850 = 0.097kg+
Add wastage @ 10% = 0.01 Okg.
= 0.107 kg.
Stainless steel cramp
Carriage
Cement montar 1:2 (1 cement: 2 coarse sand).
(Rate as per item No. 3.7)
Labour for fixing in position
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost for 0.097 kg.
Cost per kg
Say
8.8.1
8.8.1. Description
Code
7430
1034
0116
0114
9999
289
Quantity
Rate
Amount
Kg.
L.S.
cum
0.107
3.90
0.001
280.00
1.00
3864.25
29.96
3.90
3.86
L.S.
6.50
1.00
6.50
44.22
0.44
44.66
6.70
51.36
529.48
529.50
Unit
Quantity
Rate
Amount
each
30.00
10.00
300.00
quintal
0.0045
4300.00
19.35
Day
Day
L.S.
0.25
0.25
32.50
151.50
135.25
1.00
37.88
33.81
32.50
423.54
4.24
427.78
64.17
491.95
16.40
16.40
Code
7431
1034
0116
0114
9999
Description
Details of cost for 30nos. W.E.H. fastener
Materials:
Wedge expansion hold fastener size 10mm,
44.5mm length
Bolt 10mm dia. Length (44.5+10mm)
Labour:
Fitter Grade-I
Beldar
Hire and running charges for hand drill
machine Sundries, drilling bit scaffolding etc.
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost for 30 nos.
Cost for one no.
Say
Code
7432
1034
0116
0114
9999
Description
290
Unit
Quantity
Rate
Amount
each
30.00
12.00
360.00
quintal
0.006
4300.00
25.80
Day
Day
L.S.
0.25
0.25
32.50
151.50
135.25
1.00
37.88
33.81
32.50
489.99
4.90
494.89
74.23
569.12
18.97
18.95
Unit
Quantity
Rate
Amount
each
30.00
23.00
690.00
quintal
0.0075
4 300.00
32.25
Day
Day
L.S.
0.25
0.25
32.50
151.50
135.25
1.00
37.88
33.81
32.50
826.44
8.26
834.70
125.20
959.90
32.00
32.00
8.9
Stone tile (polished) work for wall lining over 12mm thick be
(1 cement: 3 coarse sand) and cement slurry @ 3.3 kg/sqm inc
white cement complete.
8.9.1 8 mm thick.
8.9.1.1 Raj Nagar plain white marble/ Udaipur green marble/ Zebra b
Code
2751
9999
9999
0 367
0123
0114
9999
Description
Details of cost for 1 sqm.
8mm thick marble tiles.
Qty. = 1.00 sqm. + Add wastage @2.5% = 0.025 sqm
Total = 1.025 sqm.
8 mm thick marble tiles (polished)
Carriage of tiles
Cement mortar 1:3 (1 Cement: 3 Coarse sand)
(Rate as per item no. 3.8)
Mortar for pointing
Cement for slurry
Mason 1 st class
Beldar
Sundries etc.
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost for 1 sqm.
Say
8.9
Stone tile (polished) work for wall lining over 12mm thick bed
(1 cement: 3 coarse sand) and cement slurry @ 3.3 kg/sqm inc
white cement complete.
8.9.1 8mm thick.
8.9.1.2 Granite of any colour and shade.
Code
2750
9999
9999
0367
0114
9999
Description
Details of cost for 1 sqm.
8mm thick Granite tiles.
Qty. = 1.00 sqm. + Add wastage .@2.5% = 0.025sqm
291
Quantity
Rate
Amount
sqm
L.S.
cum
1.025
3.95
0.014
294.00
1.00
3169.60
301.35
3.95
44.37
L.S.
tonne
Day
Day
L.S.
25.38
0.0033
1.00
1.00
16.90
1.00
4500.00
151.50
135.25
1.00
25.38
14.85
151.50
135.25
16.90
693.55
6.94
700.49
105.07
805.56
805.55
Quantity
Rate
Amount
sqm
1.025
555.00
568.88
L.S.
cum
3.95
0.014
1.00
3169.60
3.95
44.37
L.S.
tonne
Day
Day
L.S.
25.38
0.0033
1.00
1.00
16.90
1.00
4500.00
151.50
135.25
1.00
25.38
14.85
151.50
135.25
16.90
961.08
9.61
970.69
145.60
1116.29
1116.30
Unit
8.10
8.10.1
Code
7244
9999
9999
9999
8.10
8.10.2
Code
7245
9999
9999
9999
Description
Details of cost for one No or 0.375 sqm.
Materials :Granite Stone 1x0.75x0.50 = 0.375sqm.+
Add wastage @ 20% = 0.075 sqm
Total = 0.45 sqm.
Granite Stone
Cement concrete 1:2:4 for fixing
Labour for fixing, edge rounding and final
polishing.
Sundries
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 0.375 sqm
Cost of 1.00 sqm
Say
292
Unit
Quantity
Rate
Amount
sqm
L.S.
L.S.
0.45
21.58
43.16
1440.00
1.00
1.00
648.00
21.58
43.16
L.S.
21.58
1.00
21.58
734.32
7.34
741.66
111.25
852.91
2 274.43
2 274.45
Unit
Quantity
Rate
Amount
sqm
L.S.
L.S.
0.45
21.58
43.16
1670.00
1.00
1.00
751.50
21.58
43.16
L.S.
21.58
1.00
21.58
837.82
8.38
846.20
126.93
973.13
2595.01
2595.00
293
WOOD WORK
&
PVC WORK
9.1.1
Code
Description
9.1
1189
2204
0156
0114
9.1
9.1.2
Code
1199
2204
0156
0114
295
Quantity
Rate
Amount
10 cudm
cum
38.00
0.038
394.00
60.81
1 497.20
2.31
Day
Day
0.72
0.07
146.55
135.25
105.52
9.47
1 614.50
16.14
1 630.64
244.60
1 875.24
52090.00
52090.00
Quantity
Rate
Amount
10 cudm
cum
38.00
0.038
218.00
60.81
828.40
2.31
Day
Day
0.72
0.07
146.55
135.25
105.52
9.47
945.70
9.46
955.16
143.27
1 098.43
30 511.94
30511.95
9.1.3
Code
Description
2466
2204
2504
9999
9.1
0156
0114
9.2
Code
Description
Details of cost for Chowkhat of a door
206.75x117.5cm
Materials
Laminated veneer lumber including wastage
@ 5%
2x206.75x9.5x7.0cm =0.028cum+
1x117.50x9.5x7.0cm = 0.008cum.
= 0.036cum.+
Add for wastage @ 5% = 0.002cum.
Grand Total = 0.038cum.
Laminated veneer lumber
Carriage of timber
Labour:
Carpenter Ist Class
Carpenter IInd Class
Beldar
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 36 cudm
Cost per cum
Say
7157
2204
0111
0112
0114
296
Quantity
Rate
Amount
10 cudm
cum
cum
L.S.
38.00
0.038
0.038
8.97
217.00
60.81
539.00
1.00
824.60
2.31
20.48
8.97
Day
Day
0.72
0.07
146.55
135.25
105.52
9.47
971.35
9.71
981.06
147.16
1128.22
31339.44
31339.45
Quantity
Rate
Amount
10 cudm
cum
38.00
0.038
540.00
60.81
2052.00
2.31
Day
Day
Day
0.20
0.20
0.20
151.50
141.60
135.25
30.30
28.32
27.05
2139.98
21.40
2161.38
324.21
2485.59
69044.17
69044.20
9.1
9.3.1
Code
1199
2204
0112
0114
9999
9.3
9.3.2
Code
2466
2204
2504
9999
0112
0114
9999
Say
297
Unit
Quantity
Rate
Amount
10 cudm
cum
166.00
0.166
218.00
60.81
3618.80
10.09
Day
Day
L.S.
1.00
1.00
53.82
141.60
135.25
1.00
141.60
135.25
53.82
3959.56
39.60
3999.16
599.87
4599.03
29107.78
29107.80
Hollock wood.
Unit
Quantity
Rate
Amount
10 cudm
cum
cum
L.S
166.00
0.166
0.166
18.20
217.00
60.81
539.00
1.00
3602.20
10.09
89.47
18.20
Day
Day
L.S.
1.00
1.00
53.82
141.60
135.25
1.00
141.60
135.25
53.82
4050.63
40.51
4091.14
613.67
4704.81
29777.28
29777.30
9.4
9.4.1
Code
Description
1189
2204
0156
0114
9.4
9.4.2
Code
1199
2204
0156
0114
9.4
9.4.3
Code
2466
2204
298
Quantity
Rate
Amount
10 cudm
cum
3.8
0.0038
394.00
60.81
149.72
0.23
Day
Day
0.072
0.01
146.55
135.25
10.55
0.95
161.45
1.61
163.06
24.46
187.52
5208.89
5208.90
Quantity
Rate
Amount
10 cudm
cum
3.80
0.0038
218.00
60.81
82.84
0.23
Day
Day
0.072
0.007
146.55
135.25
10.55
0.95
94.57
0.95
95.52
14.33
109.85
3051.39
3051.40
Quantity
Rate
Amount
10 cudm
cum
3.80
0.0038
217.00
60.81
82.46
0.23
Code
2504
9999
0156
0114
9.5
9.5.1
9.5.1.1
Code
1190
2204
0595
0597
0637
0640
0156
0114
9999
Description
Kiln seasoning of timber
Chemical treatment
Labour:
Carpentr I class
Beldar
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 36 cudm. (finished work)
Cost per cum.
Say
Description
299
Unit
cum
L.S
Quantity
0.0038
0.90
Rate
539.00
1.00
Amount
2.05
0.90
Day
Day
0.072
0.007
146.55
135.25
10.55
0.95
97.14
0.97
98.11
14.72
112.83
3134.17
3134.15
Unit
Quantity
Rate
Amount
10 cudm
cum
10 Nos
51.00
0.051
6.00
410.00
60.81
54.00
2091.00
3.10
32.40
10 Nos
2.00
28.00
5.60
100 Nos
100 Nos
48.00
8.00
30.00
15.00
14.40
1.20
Day
Day
L.S.
1.83
0.76
35.88
146.55
135.25
1.00
268.19
102.79
35.88
2554.56
25.55
2580.11
387.02
2967.13
1373.67
1373.65
Code
Description
1190
2204
0595
0597
0637
0640
0156
0114
9999
Code
Description
Details of cost for shutters of a Door
(l/3rd glazed and 2/3rd panelled) 200x108cm
= 2.16 sqm
Materials:
Hollock wood
300
Unit
Quantity
Rate
Amount
10 cudm
cum
10 Nos
44.00
0.044
6.00
410.00
60.81
54.00
1804.00
2.68
32.40
10 Nos
2.00
28.00
5.60
100 Nos
100 Nos
48.00
8.00
30.00
15.00
14.40
1.20
Day
Day
L.S.
1.83
0.76
35.88
146.55
135.25
1.00
268.19
102.79
35.88
2267.14
22.67
2289.81
343.47
2633.28
1219.11
1219.10
Rate
Amount
Quantity
Code
2505
2204
2504
9999
0595
0597
0637
0640
0156
0114
9999
Description
Styles 4x200x10.0x3.5cm = 0.028cum+
Rails
Top rails 1x110.5x10.0x3.5cm = 0.004cum.+
Bottom rails 1x110.5x20.0x3.5cm = 0.008cum+
Code
Description
301
Unit
Quantity
Rate
Amount
10 cudm
cum
cum
L.S
10 Nos.
51.00
0.051
0.051
9.10
6.00
230.00
60.81
539.00
1.00
54.00
1173.00
3.10
27.49
9.10
32.40
10 Nos.
2.00
28.00
5.60
100 Nos
100 Nos
48.00
8.00
30.00
15.00
14.40
1.20
Day
Day
L.S.
1.83
0.76
35.88
146.55
135.25
1.00
268.19
102.79
35.88
1673.15
16.73
1689.88
253.48
1943.36
899.70
899.70
Quantity
Rate
Amount
Code
2505
2204
2504
9999
0595
0597
0637
0640
0156
0114
9999
9.6
9.6.1
Code
7137
9999
0595
0597
0637
0640
0156
0114
9999
Description
Add for wastage @ 10% = 0.004cum
Grand Total = 0.044 cum or = 44 cudm
Hollock wood
Carriage of timber
Kiln seasoning
Chemical treatment
Black enemelled M.S. Butt
hinges-100x58xl.9mm
Black enemelled M.S. Butt
hinges-50x37xl .5mm
M.S. Screws 40mm
M.S. Screws 20mm
Labour:
Carpenter (Avg.)
Beldar
Sundries
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
302
Unit
Quantity
Rate
Amount
10 cudm
cum
cum
L.S
10 Nos.
44.00
0.044
0.044
9.10
6.00
230.00
60.81
539.00
1.00
54.00
1012.00
2.68
23.72
9.10
32.40
10 Nos.
2.00
28.00
5.60
100 Nos
100 Nos
48.00
8.00
30.00
15.00
14.40
1.20
Day
Day
L.S.
1.83
0.76
35.88
146.55
135.25
1.00
268.19
102.79
35.88
1507.96
15.08
1523.04
228.46
1751.50
810.88
810.90
Quantity
Rate
Amount
sqm
L.S.
2.38
29.64
1500.00
1.00
3570.00
29.64
10 Nos
6.00
54.00
32.40
10 Nos
100 Nos
100 Nos
2.00
48.00
8.00
28.00
30.00
15.00
5.60
14.40
1.20
Day
Day
L.S.
0.52
0.60
35.88
146.55
135.25
1.00
76.21
81.15
35.88
3846.48
38.46
3884.94
582.74
4467.68
1877.18
1877.20
303
9.6.2
Code
Description
9.6
7137
9999
0595
0597
0637
0640
0156
0114
9999
9.6
9.6.3
Code
Unit
sqm
L.S.
10 Nos
10 Nos
100 Nos
100 Nos
Day
Day
L.S.
Unit
Quantity
2.38
29.64
6.00
2.00
48.00
8.00
0.52
0.60
35.88
Rate
Amount
1618.00
1.00
3850.84
29.64
54.00
32.40
28.00
30.00
15.00
5.60
14.40
1.20
146.55
135.25
1.00
76.21
81.15
35.88
4127.32
41.27
4168.59
625.29
4793.88
2014.24
2014.25
Rate
Amount
Code
7137
9999
0595
0597
0637
0640
0156
0114
9999
9.7
9.7.1
Code
1190
2204
0111
9999
Description
Plain particle board
Carriage of shutters
Fittings:
Black enamelled M.S. Butt
hinges-100x58x 1.9mm
Black enamelled M.S. Butt hinges-50x37xl.5
M.S. Screws 40mm
M.S. Screws 20mm
Labour:
Carpenter Average
Beldar
Sundries
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 2.38 sqm.
Cost of 1 sqm.
Say
304
Unit
sqm
L.S.
Quantity
2.38
29.64
Rate
1572.00
1.00
Amount
3 741.36
29.64
10 Nos
6.00
54.00
32.40
10 Nos
100
Nos
100
Nos
2.00
48.00
8.00
28.00
30.00
15.00
5.60
14.40
1.20
0.52
0.60
35.88
146.55
135.25
1.00
76.21
81.15
35.88
4 017.84
40.18
4 058.02
608.70
4 666.72
1 960.81
1 960.80
Day
Day
L.S.
Quantity
Rate
Amount
10 cudm
cum
12.90
0.0129
410.00
60.81
528.90
0.78
Day
L.S
0.57
4.42
151.50
1.00
86.35
4.42
620.45
6.20
626.65
94.00
720.65
1075.60
1075.60
Code
2505
2204
2504
9999
0111
9999
Description
Details of cost for shutters of a door
200x108cm = 2.16 sqm.
Panel area 4x45.1x36.55cm=0.66sqm.
Materials:
Hollock wood
panels 4x45.1x36.55cm = 0.0117 cum+
Add for wastage @ 10% = 0.0012cum.
= 0.0129 cum.
Hollock wood
Carriage of timber
Kiln seasoning
Chemical treatment
Labour & sundries
Carpenter 1 st class
Sundries
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 0.66 sqm.
Cost of 1 sqm.
Say
Code
2480
9999
0111
9999
Description
Details of cost for shutters of a door with
2/3 rd panelling. ..200x108cm = 2.16sqm.
Panel area = 4x45.1x36.55cm = 0.67sqm.
Materials:
Plywood (9mm thick) 4x47.2x38.65cm =
0.73sqm+
Add for wastage @ 10% = 0.07sqm.
Total = 0.80 sqm.
Ply wood 5 ply with teak ply on both faces 8
mm thick
Carriage of Plywood
Labour:
Carpenter 1 st class
Sundries
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 0.67 sqm.
Cost of 1 sqm.
Say
305
Quantity
Rate
Amount
10 cudm
cum
cum
L.S
12.90
0.0129
0.0129
8.97
230.00
60.81
539.00
1.00
296.70
0.78
6.95
8.97
Day
L.S
0.57
4.42
151.50
1.00
86.35
4.42
404.17
4.04
408.21
61.23
469.44
711.27
711.25
Quantity
Rate
Amount
sqm
0.80
693.00
554.40
L.S
1.82
1.00
1.82
Day
L.S
0.57
4.42
151.50
1.00
86.35
4.42
646.99
6.47
653.46
98.02
751.48
1121.61
1121.60
Code
2481
9999
0111
9999
Description
Details of cost for shutters of a door with
2/3rd panelling.. .200x 108cm = 2.16sqm.
Panel area = 4x45.1x36.55cm = 0.67sqm.
Materials:
Plywood (9mm thick) 4x47.2x38.65cm =
0.73sqm+
Add for wastage @ 10% = 0.07sqm.
Total = 0.80 sqm.
Ply wood 5 ply with teak ply on both faces 9
mm thick
Carriage of Plywood
Labour:
Carpenter 1 st class
Sundries
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 0.67 sqm.
Cost of 1 sqm.
Say
Code
2483
9999
0111
9999
Description
Details of cost for shutters of a door with
2/3rd panelling.. .200x 108cm = 2.16sqm.
Panel area = 4x45.1x36.55cm = 0.67sqm.
Materials:
Plywood (9mm thick) 4x47.2x38.65cm =
0.73sqm+
Add for wastage @ 10% = 0.07sqm.
Total = 0.80 sqm.
Ply wood 7 ply with teak ply on both faces
9 mm thick
Carriage of Plywood
Labour:
Carpenter 1 st class
Sundries
306
Quantity
Rate
Amount
sqm
0.80
550.00
440.00
L.S
1.82
1.00
1.82
Day
L.S
0.57
4.42
151.50
1.00
86.35
4.42
532.59
5.33
537.92
80.69
618.61
923.30
923.30
Quantity
Rate
Amount
sqm
0.80
550.00
468.00
L.S
1.82
1.00
1.82
Day
L.S
0.57
4.42
151.50
1.00
86.35
4.42
Code
Description
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 0.67 sqm.
Cost of 1 sqm.
Say
Code
0341
9999
0111
9999
Description
Details of cost for shutters of a door with
2/3rd panelling...200x108cm = 2.16sqm.
Panel area = 4x45.1x36.55cm = 0.67sqm.
Materials:
Plywood 4x47.2x38.65cm = 0.73sqm+
Add for wastage @ 10% = 0.07sqm.
Total = 0.80 sqm.
Particle board 12mm thick
Carriage of Plywood
Labour:
Carpenter 1st class
Sundries
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 0.67 sqm.
Cost of 1 sqm.
Say
Code
Description
Details of cost for shutters of a door with
2/3rd panelling.. .200x108cm = 2.16sqm.
Panel area = 4x45.1x36.55cm = 0.67sqm.
Materials:
Particle board 4x47.2x38.65cm = 0.73sqm+
307
Unit
Quantity
Rate
Amount
560.59
5.61
566.20
84.93
651.13
971.84
971.85
Quantity
Rate
Amount
sqm
L.S
0.80
1.82
258.00
1.00
206.40
1.82
Day
L.S
0.57
4.42
151.50
1.00
86.35
4.42
298.99
2.99
301.98
45.30
347.28
518.33
518.35
Rate
Amount
Quantity
Code
7468
9999
0111
9999
Description
Add for wastage @ 10% = 0.07sqm.
Total = 0.80 sqm.
Carriage of Plywood
Labour:
Carpenter 1st class
Sundries
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 0.67 sqm.
Cost of 1 sqm.
Say
Code
7477
9999
0111
9999
Description
Details of cost for shutters of a door with
2/3rd panelling.. .200x108cm = 2.16sqm.
Panel area = 4x45.1x36.55cm = 0.67sqm.
Materials:
Particle board 4x47.2x38.65cm = 0.73sqm+
Add for wastage @ 10% = 0.07sqm.
Total = 0.80 sqm.
Carriage of Plywood
Labour:
Carpenter 1st class
Sundries
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 0.67 sqm.
Cost of 1 sqm.
Say
Code
Description
Details of cost for shutters of a door with
2/3rd panelling.. .200x108cm = 2.16sqm.
Panel area = 4x45.1x36.55cm = 0.67sqm.
Materials:
308
Unit
Quantity
Rate
Amount
sqm
L.S
0.80
1.82
418.00
1.00
334.40
1.82
Day
L.S
0.57
4.42
151.50
1.00
86.35
4.42
426.99
4.27
431.26
64.69
495.95
740.22
740.20
Unit
Quantity
Rate
Amount
sqm
L.S
0.80
1.82
595.00
1.00
476.00
1.82
Day
L.S
0.57
4.42
151.50
1.00
86.35
4.42
568.59
5.69
574.28
86.14
660.42
985.70
985.70
Quantity
Rate
Amount
Code
7480
9999
0111
9999
9.8
9.8.1
Code
7555
9999
0111
9999
Description
Particale board 4x47.2x38.65cm = 0.73sqm+
Add for wastage @ 10% = 0.07sqm.
Total = 0.80 sqm.
Carriage of Plywood
Labour:
Carpenter 1st class
Sundries
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 0.67 sqm.
Cost of 1 sqm.
Say
Code
Description
Details of cost for shutter of a door (glazed)
200xl08cm = 2.16 sqm.
Materials :
(i) Teak wood (2nd class)
309
Unit
Quantity
Rate
Amount
sqm
L.S
0.80
1.82
625.00
1.00
500.00
1.82
Day
L.S
0.57
4.42
151.50
1.00
86.35
4.42
592.59
5.93
598.52
89.78
688.30
1 027.31
1 027.30
Unit
Quantity
Rate
Amount
sqm
L.S
0.80
1.82
548.00
1.00
438.40
1.82
Day
L.S
0.57
4.42
151.50
1.00
86.35
4.42
530.99
5.31
536.30
80.44
616.74
920.51
920.50
Rate
Amount
Unit
Quantity
Code
1190
2406
0595
0597
0637
0640
2204
0156
0119
0114
9999
Description
Styles : 4x200x9.5x3.5cm = 0.027cum
Rails
Top & intermediate rails
2x110.5x9.5x3.5cm = 0.008cum
Lock and bottom rails
2x110.5xl9.7x3.5cm = 0.015cum
Beadings2x186.1x1.9x1.2cm = 0.001cum
4x 171.70x 1.9x 1.2cm = 0.002cum.
Total = 0.053 cum.
Add for wastage @ 10% = 0.005cum.
Grand Total = 0.058 cum.
Teak wood (2nd Class)
(ii) Float glasses 4.0mm thick
(iii) Black enamelled M.S. butt
hinges-100x58x1.90mm
Black enamelled M.S. butt
hinges-50x37xl .50mm
M.S. Screws 40mm
M.S. Screws 20mm
Carriage of Timber
Labour:
Carpenter (Avg.)
Glazier
Beldar
Sundries
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
Providing and fixing glazed shutters for doors, windows and cler
using 4 mm thick float glass panes including black enamelled ISI
hinges with necessary screws.
9.9.1 Second class teak wood
9.9.1.1 30 mm thick
9.9
Code
Description
Details of cost for shutter of a door (glazed)
200x108cm = 2.16 sqm.
Materials :
(i) Teak wood
Styles : 4x200x9.5x3.0cm = 0.023cum+
Rails
Top & intermediate rails
2x110.5x9.5x3.0cm = 0.006cum+
Lock and bottom rails
2x110.5x19.7x3.0cm = 0.013cum+
Beadings2x186.1xl.9xl.2cm = 0.001cum+
4x 171.70x 1.9x 1.2cm = 0.002cum.
Total = 0.045 cum.+
310
Unit
Quantity
Rate
Amount
10 cudm
sqm
10 Nos
58.00
1.27
6.00
410.00
248.00
54.00
2378.00
314.96
32.40
10 Nos
2.00
28.00
5.60
100 Nos
100 Nos
cum
48.00
8.00
0.06
30.00
15.00
60.81
14.40
1.20
3.53
Day
Day
Day
L.S.
1.83
0.23
0.77
40.43
146.55
141.60
135.25
1.00
268.19
32.57
104.14
40.43
3195.42
31.95
3227.37
484.11
3711.48
1718.28
1718.30
Rate
Amount
Unit
Quantity
Code
1190
2406
0595
0597
0637
0640
2204
0156
0119
0114
9999
9.9
9.9.2
9.9.2.1
Code
2505
2504
9999
2406
0595
0597
0640
Description
Add for wastage @ 10% = 0.005cum.
Grand Total = 0.050 cum.
Teak wood
(ii) Float glasses 4.0mm thick
(iii) Black enamelled M.S. butt
hinges-100x58x1.90mm
Black enamelled M.S. butt
hinges-50x3 7x 1.50mm
M.S. Screws 40mm
M.S. Screws 20mm
(iv) Carriage of timber
Labour:
Carpenter (Avg.)
Glazier
Beldar
Sundries
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
Description
Details of cost for shutter of a door (glazed)
200x108cm = 2.16 sqm.
Materials :
(i) Hollock wood
Styles : 4x200x9.5x3.5cm = 0.027 cum+
Rails
Top & intermediate rails
2x110.5x9.5x3.50cm = 0.008cum+
Lock and bottom rails
2x110.5x19.7x3.50cm = 0.015cum+
Beadings2xl86.1x1.9x1.2cm = 0.001cum+
4x 171.70x 1.9x 1.2cm = 0.002cum.
Total = 0.053 cum.+
Add for wastage @ 10% = 0.005cum.
Grand Total = 0.058 cum or = 58 cudm
Hollock wood
(ii) Kiln seasoning
(iii) Chemical treatment
(iv) Float glassess 4.0 mm thick
(v) Black enamelled M.S. Butt
hinges-100x58x1.90mm
Black enamelled M.S. butt
hinges 50x37x 1.50mm
M.S. Screws 40mm
311
Unit
Quantity
Rate
Amount
10 cudm
sqm
10 Nos
50.00
1.27
6.00
410.00
248.00
54.00
2 050.00
314.96
32.40
10 Nos
2.00
28.00
5.60
100 Nos
100 Nos
cum
48.00
8.00
0.05
30.00
15.00
60.81
14.40
1.20
3.04
Day
Day
Day
L.S.
1.83
0.23
0.77
40.43
146.55
141.60
135.25
1.00
268.19
32.57
104.14
40.43
2 866.93
28.67
2 895.60
434.34
3 329.94
1 541.64
1 541.65
Hollock wood
Unit
Quantity
Rate
Amount
10 cudm
cum
L.S
sqm
10 Nos
58.00
0.058
9.10
1.27
6.00
230.00
539.00
1.00
248.00
54.00
1334.00
31.26
9.10
314.96
32.40
10 Nos
100 Nos
2.00
48.00
28.00
30.00
5.60
14.40
Code
0640
2204
0156
0119
0114
9999
Description
M.S. Screws 20mm
(iv) Carriage of timber
Labour:
Carpenter (Avg.)
Glazier
Beldar
Sundries
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
Providing and fixing glazed shutters for doors, windows and clere
using 4 mm thick float glass panes including black enamelled ISI
hinges with necessary screws.
9.9.2 Kiln seasoned and chemically treated Hollock wood
9.9.2.2 30 mm thick
9.9
Code
2505
2504
9999
2406
0595
0597
0637
0640
2204
0156
0119
0114
9999
Description
Details of cost for shutter of a door (glazed)
200x108cm = 2.16 sqm.
Materials :
(i) Hollock wood
Styles : 4x200x9.50x3.0cm = 0.023cum+
Rails
Top & intermediate rails
2x110.5x9.50x3.0cm = 0.006cum+
Lock and bottom rails
2x110.5x19.70x3.0cm = 0.013cum+
Beadings2x186.1x1.9x1.2cm = 0.001cum+
4x 171.70x 1.9x 1.2cm = 0.002cum.
Total = 0.045 cum.+
Add for wastage @ 10% = 0.005cum.
Grand Total = 0.050
Hollock wood
(ii) Kiln seasoning
(iii) Chemical treatment
(iv) Float glassess 4.0 mm thick
(v) Black enamelled M.S. Butt
hinges 100x58x1.90mm
Black enamelled M.S. butt
hinges 50x37x 1.50mm
M.S. Screws 40mm
M.S. Screws 20mm
(iv) Carriage of timber
Labour:
Carpenter (Avg.)
Glazier
Beldar
Sundries
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
312
Unit
100 Nos
cum
Quantity
8.00
0.058
Rate
15.00
60.81
Amount
1.20
3.53
Day
Day
Day
L.S.
1.83
0.23
0.77
40.43
146.55
141.60
135.25
1.00
268.19
32.57
104.14
40.43
2191.78
21.92
213.70
332.06
2545.76
1178.59
1178.60
Hollock wood
Unit
Quantity
Rate
Amount
10 cudm
cum
L.S
sqm
10 Nos
50.00
0.058
9.10
1.27
6.00
230.00
539.00
1.00
248.00
54.00
1 150.00
26.95
9.10
314.96
32.40
10 Nos
2.00
28.00
5.60
100 Nos
100 Nos
cum
48.00
8.00
0.05
30.00
15.00
60.81
14.40
1.20
3.04
Day
Day
Day
L.S.
1.83
0.23
0.77
40.43
146.55
141.60
135.25
1.00
268.19
32.57
104.14
40.43
2002.98
20.03
2023.01
303.45
2326.46
1077.07
1077.05
9.10.1
Code
Description
9.10
7151
9999
0595
0597
0637
0640
0156
0114
9999
9.11.1
Code
Description
9.11
2407
2406
313
Quantity
Rate
Amount
sqm
2.38
1290.00
3 070.20
L.S.
29.64
1.00
29.64
10 Nos
6.00
54.00
32.40
10 Nos
2.00
28.00
5.60
100 Nos
100 Nos
48.00
8.00
30.00
15.00
14.40
1.20
Day
Day
L.S.
0.52
0.60
35.88
146.55
135.25
1.00
76.21
81.15
35.88
3 346.68
33.47
3 380.15
507.02
3 887.17
1 633.26
1 633.25
Quantity
Rate
Amount
sqm
sqm
1.00
1.00
340.00
248.00
340.00
248.00
92.00
0.92
92.92
13.94
106.86
106.85
9.12
Code
Description
7032
2406
9. 13
Code
Description
7451
2406
9. 14
Extra for providing ISI marked Stainless Steel butt hinges instead
M.S. butt hinges with necessary screws. (Shutter area to be meas
Code
Description
8220
8218
8211
8214
0595
0597
0637
0640
314
Quantity
Rate
Amount
sqm
sqm
1.00
1.00
257.00
248.00
257.00
248.00
9.00
0.09
9.09
1.36
10.45
10.45
Quantity
Rate
Amount
sqm
sqm
1.00
1.00
160.00
248.00
160.00
248.00
88.00
0.88
88.88
13.33
102.21
102.20
Quantity
Rate
Amount
10 Nos
10 Nos
100 Nos
100 Nos
6.00
2.00
48.00
8.00
185.00
90.00
157.00
63.00
111.00
18.00
75.36
5.04
10 Nos
10 Nos
6.00
2.00
54.00
28.00
-32.40
-5.60
100 Nos
100 Nos
48.00
8.00
30.00
15.00
-14.40
-1.20
155.80
1.56
157.36
Code
Description
Add 15% for contractors profit and overheads
Extra cost of 2.16sqm. of shutter area
Extra cost of 1 sqm. of shutter area
Say
9. 15
9.15.1
9.15.1.1
Code
8220
8218
8211
8214
For 2nd class teak wood and other inferior class of wood shut
Description
Details of cost of fittings for shutter of size
200x108cm = 2.16 sqm.
Materials:
Anodised aluminum butt hinges
Stainless steel butt hinges (heavy weight)
100x60x2.5 mm IS : 12817 marked
Stainless steel butt hinges 50x37x1.5 mm IS :
12817 marked
Stainless steel screws 40 mm
Stainless steel screws 20 mm
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
Code
0595
0597
0637
0640
Description
Details of cost of hinges with screws for
shutters of size
200x108cm = 2.16 sqm.
Materials:
Iron butt hinges 100x58x1.90 mm (medium)
Iron butt hinges 50x37x1.50 mm (medium)
Iron screws 40 mm
Iron screws 20 mm
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
315
Unit
Quantity
Rate
Amount
23.60
180.96
83.78
83.80
Quantity
Rate
Amount
10 Nos
6.00
185.00
111.00
10 Nos
2.00
90.00
18.00
100 Nos
100 Nos
48.00
8.00
157.00
63.00
75.36
5.04
209.40
2.09
211.49
31.72
243.21
112.60
112.60
Quantity
Rate
Amount
10 Nos
10 Nos
100 Nos
100 Nos
6.00
2.00
48.00
8.00
54.00
28.00
30.00
15.00
32.40
5.60
14.40
1.20
53.60
0.54
54.14
8.12
62.26
28.82
28.80
1190
2204
2406
0694
0586
0111
0119
0114
9999
Description
Details of cost for shutters of a cup-board (half
glazed and half panelled) 200x108cm = 2.16
sqm.
Materials: Styles-4x200x8.0x2.5cm = 0.016 cum+
Rails-Top rail-1x1 10.5x8.0x2.5cm = 0.0022cum+
Lock and bottom rail-2x110.5x8.0x2.5cm =
0.0044 cum.+
Panels-2x48x41 x 1.6cm = 0.006cum+
Sash bars-2x114x3.8x2.5cm = 0.003cum+
6x48x3.8x2.5cm = 0.003 cum+
Beading-16x92x 1.4x 1.2cm = 0.002cum
Total =
0.0366
Add for wastage @ 10% = 0.0037 cum. Grand
Total =
0.0403 cum or 40 cudm
Second class teak wood .
Carriage of timber
Float glasses 4.0mm thick
FittingsAnodised aluminium butt hinges-75x45x3.2
mm
C.P. brass screws 40mm
LabourCarpenter 1st class
Glazier
Beldar
Sundries
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
Description
Details of cost for shutter of cup-board
200xl08cm = 2.16 sqm.
Materials :
(i) Teak wood second class
Styles : 4x200x9.5x2.5 cm = 0.019 cum
Rails
Top & intermediate rails
2x110.5x9.5x2.5 cm = 0.006 cum
316
Quantity
Rate
Amount
10 cudm
cum
sqm
40.00
0.04
0.99
410.00
60.81
248.00
1640.00
2.43
245.52
10 Nos
6.00
98.00
58.80
100 Nos
48.00
150.00
72.00
Day
Day
Day
L.S
2.40
0.18
0.77
40.43
151.50
141.60
135.25
1.00
363.60
25.49
104.14
40.43
2552.41
25.52
2577.93
386.69
2964.62
1372.51
1372.50
Rate
Amount
Quantity
Code
1190
2204
0608
0639
2204
0156
0119
0114
9999
9. 17
9.17.1
Code
0341
9999
9999
0112
0114
Description
Lock and bottom rails
2x110.5x19.7x2.5 cm = 0.011 cum
Beadings2x186.1x1.9xl.2cm = 0.001cum+
4x171.70x1.9x1.2cm = 0.002cum.
Total = 0.039 cum.
Add for wastage @ 10% = 0.004 cum.
Grand Total = 0.043 cum. 43 cudm
Teak wood second class
(ii) Glasses (10kg/sqm) 4.0mm thick
(iii) Piano hinges 75x45x3.2 mm
(iv)M.S. screws 25 mm
(v) Carriage of timber
Labour:
Carpenter (Avg.)
Glazier
Beldar
Sundries
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
Description
Details of cost for 350x200cm = 7sqm.
Materials12mm thick particle board = 7.00sqm.+
Add wastage @ 5% = 0.35 sqm.
Total = 7.35 sqm.
Carriage of particle board
Sundries and screws
LabourCarpenter 2nd class
Beldar
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 7 sqm.
Cost of 1 sqm.
Say
317
Unit
Quantity
Rate
Amount
10 cudm
sqm
metre
100 Nos
cum
43.00
1.27
6.00
48.00
0.04
410.00
248.00
21.00
15.00
60.81
1763.00
314.96
12.60
7.20
2.61
Day
Day
Day
L.S
1.83
0.23
0.77
40.43
146.55
141.60
135.25
1.00
268.19
32.57
104.14
40.43
2545.70
25.46
2571.16
385.67
2956.83
1368.90
1368.90
Unit
Quantity
Rate
Amount
sqm
L.S
L.S
7.35
13.52
26.91
258.00
1.00
1.00
1896.30
13.52
26.91
Day
Day
0.90
1.00
141.60
135.25
127.44
135.25
2199.42
21.99
2221.41
333.21
2554.62
364.95
364.95
Code
7055
9999
9999
0112
0114
Description
Details of cost for 350x200cm = 7sqm.
Materials12mm thick particle board = 7.00sqm.+
Add wastage @ 5% = 0.35 sqm.
Total = 7.35 sqm.
Carriage of particle board
Sundries and screws
LabourCarpenter 2nd class
Beldar
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 7 sqm.
Cost of 1 sqm.
Say
Code
7478
9999
0112
0114
9999
Description
Details of cost for 4 nos.
75x20cm shelves = 0.60 sqm.
Materials18mm thick particle board =
4x75x20cm = 0.60sqm.+
Wastage @ 5% = 0.03sqm:
Total = 0.63 sqm.
Carriage of board
LabourCarpenter 2nd class
Beldar
Sundries, Painting edges & Screws
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 0.60 sqm.
Cost per sqm.
Say
318
Unit
Quantity
Rate
Amount
sqm
L.S
L.S
7.35
19.76
26.91
301.00
1.00
1.00
2 212.35
19.76
26.91
Day
Day
0.90
1.00
141.60
135.25
127.44
135.25
2 521.71
25.22
2 546.93
382.04
2 928.97
418.42
418.40
Quantity
Rate
Amount
sqm
L.S
0.63
0.91
716.00
1.00
451.08
0.91
Day
Day
L.S
0.11
0.06
7.80
141.60
135.25
1.00
15.58
8.12
7.80
483.49
4.83
488.32
73.25
561.57
935.95
935.95
Code
7479
9999
0112
0114
9999
Discription
Details of cost for 4 nos.
75x20cm shelves = 0.60 sqm.
Materials25mm thick particle board =
4x75x20cm = 0.60sqm.+
Wastage @ 5% = 0.03sqm:
Total = 0.63 sqm.
Carriage of board
LabourCarpenter 2nd class
Beldar
Sundries, Painting edges & Screws
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 0.60 sqm.
Cost per sqm.
Say
Code
Description
Details of cost for shutters of a cup board (half
panelled and half glazed) 200x108cm = 2.16
sqm.
MaterialsTeak wood (2nd class)
Styles 4x2.00m = 8.00m+
Rails 3x1.105m = 3.315m
= 11.315m
11.315x0.08x0.025 = 0.023 cum.
Panels - 2x0.48x0.41x0.016 = 0.006 cum.
Sash bars 2x1.14 = 2.28+
6x0.48 = 2.88
= 5.16
5.16x0.038x0.025 = 0.005 cum.
Beadings 16x0.92x0.014x0.012 = 0.002
cum.
total = 0.036 cum.+
Add wastage @ 10% = 0.004 cum.
Total = 0.040 cum. Say 40 cudm
319
Quantity
Rate
Amount
sqm
L.S
0.63
1.82
775.00
1.00
488.25
1.82
Day
Day
L.S
0.11
0.06
7.80
141.60
135.25
1.00
15.58
8.12
7.80
521.57
5.22
526.79
79.02
605.81
1009.68
1009.70
Rate
Amount
Unit
Quantity
Code
1190
2204
0596
0638
2406
0156
0114
0119
9999
Description
Teak wood (2nd class)
Carriage of timber
Iron hinges-75x47xl .70mm
Screws 30mm
Glasses 10kg/sqm (4.0mm thick)
LabourCarpenter (Average)
Beldar
Glazier
Sundries
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 2.16sqm.
Cost of 1 sqm.
Say
9.19
1190
2406
0595
0597
0637
0640
2204
0156
0119
0114
9999
Description
Details of cost for shutter of a door (glazed)
200xl08cm = 2.16 sqm.
Materials :
(i) Teak wood (2nd class)
Styles : 4x200x9.5x2.5cm = 0.019cum+
Rails
Top & intermediate rails
2x110.5x9.5x2.5cm = 0.006cum+
Lock and bottom rails
2x110.5x19.7x2.5cm = 0.011cum+
Beadings2x186.1x1.9x1.2cm = 0.001cum+
4x171.70x1.9x1.2cm = 0.002cum.
Total = 0.039 cum.+
Add for wastage @ 10% = 0.004cum.
Grand Total = 0.043 cum. Say 43 cudm
Teak wood (2nd class)
(ii) Glasses (10 kg/sqm) 4.0mm thick
(iii) Black enamelled M.S. butt
hinges 100x58x1.90mm
Black enamelled M.S. butt
hinges 50x37x 1.50mm
M.S. Screws 40mm
M.S. Screws 20mm
(iv) Carriage of timber
Labour:
Carpenter (Avg.)
Glazier
Beldar
Sundries
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
320
Unit
Quantity
Rate
Amount
10 cudm
cum
10 Nos
100 Nos
sqm
40.00
0.04
6.00
48.00
0.99
410.00
60.81
34.00
24.00
248.00
1640.00
2.43
20.40
11.52
245.52
Day
Day
Day
L.S.
2.40
0.77
0.18
40.43
146.55
135.25
141.60
1.00
351.72
104.14
25.49
40.43
2441.65
24.42
2466.07
369.91
2835.98
1312.95
1312.95
Unit
Quantity
Rate
Amount
10 cudm
sqm
10 Nos
43.00
1.27
6.00
410.00
248.00
54.00
1763.00
314.96
32.40
10 Nos
2.00
28.00
5.60
100 Nos
100 Nos
cum
48.00
8.00
0.043
30.00
15.00
60.81
14.40
1.20
2.61
Day
Day
Day
L.S.
1.83
0.23
0.77
40.43
146.55
141.60
135.25
1.00
268.19
32.57
104.14
40.43
2579.50
25.80
2605.30
390.80
2996.10
1387.08
1387.10
9.2
9.20.1
Code
0713
9999
8220
8211
0156
0114
9.20
9.20.2
Code
0714
9999
8220
8211
0156
0114
321
Quantity
Rate
Amount
sqm
L.S.
10 Nos
2.20
29.64
6.00
1100.00
1.00
185.00
2420.00
29.64
111.00
100 Nos
48.00
157.00
75.36
Day
Day
0.55
0.55
146.55
135.25
80.60
74.39
2790.99
27.91
2818.90
422.84
3241.74
1473.52
1473.50
Quantity
Rate
Amount
sqm
L.S.
10 Nos
2.20
29.64
6.00
1050.00
1.00
185.00
2310.00
29.64
111.00
100 Nos
48.00
157.00
75.36
Day
Day
0.55
0.55
146.55
135.25
80.60
74.39
2680.99
26.81
2707.80
406.17
3113.97
1415.44
1415.45
Code
0715
9999
0608
0639
0156
0114
Description
Details of cost for 2.2 sqm.
Materials25mm thick door shutters
Carriage of door
Fittings-For a door 2.2x1.00m = 2.20 sqm.
Nickel plated bright finished M.S. Piano hinges
Screws 25mm
LabourFor fixing shutter and fittings.
Carpenter (Average)
Beldar
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost for 2.2 sqm.
Cost of 1 sqm.
Say
9.21
0717
9999
8220
8211
0156
0114
Description
Details of cost for 2.2 sqm.
Materials35mm thick door shutters
Carriage of door
Fittings-For a door 2.2x1.0m = 2.20 sqm.
Stainless steel butt hinges (heavy weight)
100x60x2.5 mm IS : 12817 marked
Stainless steel screws 40 mm
LabourFor fixing shutter and fittings.
Carpenter (Average)
Beldar
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost for 2.2 sqm.
Cost of 1 sqm.
Say
322
Quantity
Rate
Amount
sqm
L.S.
2.20
29.64
1 000.00
1.00
2200.00
29.64
metre
100 Nos
4.40
125.00
21.00
15.00
92.40
18.75
Day
Day
0.55
0.55
146.55
135.25
80.60
74.39
2495.78
24.96
2520.74
378.11
2898.85
1317.66
1317.65
Quantity
Rate
Amount
sqm
L.S.
2.20
29.64
632.00
1.00
1390.40
29.64
10 Nos
6.00
185.00
111.00
100 Nos
48.00
157.00
75.36
Day
Day
0.55
0.55
146.55
135.25
80.60
74.39
1761.39
17.61
1779.00
266.85
2045.85
929.93
929.95
9.21
9.21.2
Code
0718
9999
8220
8211
0156
0114
9.21
9.21.3
Code
0719
9999
0608
0639
0156
0114
323
Quantity
Rate
Amount
sqm
L.S.
2.20
29.64
610.00
1.00
1 342.00
29.64
10 Nos
6.00
185.00
111.00
100 Nos
48 .00
157.00
75.36
Day
Day
0.55
0.55
146.55
135.25
80.60
74.39
1 712.99
17.13
1 730.12
259.52
1 989.64
904.38
904.40
Quantity
Rate
Amount
sqm
L.S.
2.20
29.64
600.00
1.00
1320.00
29.64
metre
100 Nos
4.40
125.00
21.00
15.00
92.40
18.75
Day
Day
0.55
0.55
146.55
135.25
80.60
74.39
1615.78
16.16
1631.94
244.79
1876.73
853.06
853.05
9.22
9.22.1
Code
7307
Extra for Providing and fixing flush doors with decorative vene
On one side in item no. 9.21
Description
Details of cost for 1 sqm.
Extra for providing teak veneering on one side
instead of commercial veneering
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost for one sqm.
Say
9.23
Extra for providing lipping with 2nd class teak wood battens 2
depth on all edges of shutters (over all area of door shutter to
item no. 9.20 and 9.21.
Code
Description
Details of cost for 1 sqm. of door area
Door area
0752
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost for one sqm. of door area
Say
9.24
9.24.1
Code
0753
Extra for providing vision panel not exceeding 0.1 sqm in all ty
(cost of glass excluded) (overall area of door shutter to be me
Rectangular or square.
Description
Details of cost for 1 sqm. of door area
Rectangular or square per panel door area
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost for one sqm. of door area
Say
9.24
9.24.2
Code
0754
Extra for providing vision panel not exceeding 0.1 sqm in all ty
(cost of glass excluded) (overall area of door shutter to be me
Circular.
Description
Details of cost for 1 sqm. of door area
Circular panel door area
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost for one sqm. of door area
Say
324
Quantity
Rate
Amount
sqm
1.00
225.00
225.00
225.00
2.25
227.25
34.09
261.34
261.35
Quantity
Rate
Amount
sqm of door
area.
1.00
245.00
245.00
245.00
2.45
247.45
37.12
284.57
284.55
Quantity
Rate
Amount
sqm of door
area
1.00
86.00
86.00
86.00
0.86
86.86
13.03
99.89
99.90
Quantity
Rate
Amount
sqm of door
area
1.00
118.00
118.00
118.00
1.18
119.18
17.88
137.06
137.05
9.25 Extra if louvers (not exceeding 0.2 sqm) are provided in flush d
area of door shutters to be measured).
9.25.1 Decorative type door.
Code
0755
Description
Details of cost for 1 sqm. of door area
Decorative type door
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost for one sqm. of door area
Say
9.26 Extra for cutting rebate in flush door shutters (Total area of the
measured).
Code
Description
Details of cost for 1 sqm. of door area
0757
Door area
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost for one sqm. of door area
Say
9.27 Providing and fixing 35mm thick wire gauze shutters using gal
gauze of average width of aperture 1.4mm with wire of dia. 0.
windows and clerestory windows including ISI marked bright fi
black enamelled M.S. butt hinges with necessary screws:
9.27.1 Second class teak wood.
Code
Description
Details of cost for door shutters
2.00x1.08m = 2.16 sqm.
MaterialsTeak wood (2nd class)
Styles 4x200x9.5x3.5cm = 0.0266cum+
Top Rail - 1x110.5x9.5x3.5cm = 0.0036cum+
Lock and bottom rail
2x110.5x 19.7x3.5cm = 0.0152 cum.+
Beadings - (2x312+2x150)x(1.2)x(1.2)cm =
0.001 cum.
Total = 0.0464 cum.+
Add for wastage @ 10% = 0.005 cum.
= 0.0514 cum.
Say 51.4 cudm.
325
Unit
Quantity
Rate
Amount
sqm of
door area
1.00
210.00
210.00
210.00
2.10
212.00
31.82
243.92
243.90
Quantity
Rate
Amount
sqm of
door area
1.00
57.00
57.00
57.00
0.57
57.57
8.64
66.21
66.20
Quantity
Rate
Amount
Code
1190
7029
0595
0597
0637
0640
2204
0111
0112
0114
0130
9999
9.27
9.27.2
Code
2505
2204
2504
9999
07029
0595
0597
0637
Description
Teak wood (2nd class)
Wire gauge 2x160x40cm = 1.28 sqm.+
Add wastage @ 10% = 0.13 sqm.
Total= 1.41 sqm.
Wire gauge
M.S. butt hinges 100x58x1.90 mm
M.S. butt hinges 50x37x1.50 mm
M.S. screws 40 mm
M.S. screws 20 mm
Carriage of timber
LabourCarpenter 1st class
Carpenter 2nd class
Beldar
Mistry
Sundries
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
Providing and fixing 35mm thick wire gauze shutters using galv
gauze of average width of aperture 1.4mm with wire of dia. 0.6
windows and clerestory windows including ISI marked bright fi
black enamelled M.S. butt hinges with necessary screws:
Kiln seasoned and chemically treated Hollock wood.
Description
Details of cost for door shutters
2.00x1.08m = 2.16sqm.
MaterialsHollock wood
Styles 4x200x9.5x3.5cm = 0.0266cum+
Top Rail - 1x110.5x9.5x3.5cm = 0.0036cum+
Lock and bottom rail
2x110.5xl9.7x3.5cm = 0.0152 cum.+
Beadings - (2x312+2x 150)x( 1.2)x( 1.2)cm =
0.001 cum.
Total = 0.0464 cum.+
Add for wastage @ 10% = 0.005 cum.
= 0.0514 cum.
Say 51.4 cudm.
Hollock wood
Carriage of timber
Kiln seasoning of timber
Chemical treatment
Wire gauge 2xl60x40cm = 1.28 sqm.+
Add wastage @ 10% = 0.13 sqm.
Total= 1.41 sqm.
Wire gauge
Iron butt hinges 100x58x1.90 mm
Iron butt hinges 50x37x1.50 mm
M.S. screws 40 mm
326
Unit
10 cudm
Quantity
51.40
Rate
410.00
Amount
2 107.40
sqm
10 Nos
10 Nos
100 Nos
100 Nos
cum
1.41
6.00
2.00
48.00
8.00
0.05
142.00
54.00
28.00
30.00
15.00
60.81
200.22
32.40
5.60
14.40
1.20
3.13
Day
Day
Day
Day
L.S.
1.30
0.90
1.05
0.11
33.80
151.50
141.60
135.25
151.50
1.00
196.95
127.44
142.01
15.91
33.80
2 880.46
28.80
2 909.26
436.39
3 345.65
1 548.91
1 548.90
ed Hollock wood.
Unit
Quantity
Rate
Amount
10 cudm
cum
cum
L.S.
51.40
0.05
0.05
8.97
230.00
60.81
539.00
1.00
1182.20
3.13
27.70
8.97
sqm
10 Nos
10 Nos
100 Nos
1.41
6.00
2.00
48.00
142.00
54.00
28.00
30.00
200.22
32.40
5.60
14.40
Code
0640
0111
0112
0114
0130
9999
9.28
9.28.1
Code
1190
7029
8220
8218
8211
8214
2204
0111
0112
0114
0130
9s999
Description
M.S. screws 20 mm
LabourCarpenter 1st class
Carpenter 2nd class
Beldar
Mistry
Sundries
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
Cost of 1 sqm.
Say
327
Unit
100 Nos
Quantity
8.00
Rate
15.00
Amount
1.20
Day
Day
Day
Day
L.S.
1.30
0.90
1.05
0.105
33.80
151.50
141.60
135.25
151.50
1.00
196.95
127.44
142.01
15.91
33.80
1 991.93
19.92
2 011.85
301.78
2 313.63
1 071.13
1 071.10
Unit
Quantity
Rate
Amount
10 cudm
51.40
410.00
2 107.40
sqm
10 Nos
1.41
6.00
142.00
185.00
200.22
111.00
2.00
90.00
18.00
100 Nos
100 Nos
cum
48.00
8.00
0.05
157.00
63.00
60.81
75.36
5.04
3.13
Day
Day
Day
Day
L.S.
1.30
0.90
1.05
0.105
33.80
151.50
141.60
135.25
151.50
1.00
196.95
127.44
142.01
15.91
33.80
3 036.26
30.36
3 066.62
459.99
3 526.61
1 632.69
1 632.70
Providing and fixing 35mm thick wire gauze shutters using galv
gauze of average width of aperture 1.4mm with wire of dia. 0.6
windows and clerestory windows including ISI marked stainless
hinges with necessary screws :
9.28.2 Kiln seasoned and chemically treated Hollock wood.
9.28
Code
2505
2504
9999
7029
8220
8218
8211
8214
2204
0111
0112
0114
0130
9999
Description
Details of cost for door shutters
2.00x1.08m = 2.16 sqm.
MaterialsHollock wood
Styles 4x200x9.5x3.5cm = 0.0266cum+
Top Rail - 1x1 10.5x9.5x3.5cm = 0.0036cum+
Lock and bottom rail
2x110.5x19.7x3.5cm = 0.0152 cum.+
Beadings - (2x312+2x 150)x( 1.2)x( 1.2)cm =
0.001 cum.
Total = 0.0464 cum.+
Add for wastage @ 10% = 0.005 cum.
= 0.0514 cum.
Say 51.4 cudm.
Hollock wood
Kiln seasoning
Chemical treatment
Wire gauge 2x160x40cm = 1.28 sqm.+
Add wastage @ 10% = 0.13 sqm.
Total= 1.41 sqm.
Wire gauge
Stainless steel butt hinges (heavy weight)
100x60x2.5 mm IS : 12817 marked
Stainless steel butt hinges 50x37x1.5 mm IS :
12817 marked
Stainless steel screws 40 mm
Stainless steel screws 20 mm
Carriage of timber
LabourCarpenter 1st class
Carpenter 2nd class
Beldar
Mistry
Sundries
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
328
Hollock wood.
Unit
Quantity
Rate
Amount
10 cudm
cum
L.S.
51.40
0.0514
8.97
230.00
539.00
1.00
1 182.20
27.70
8.97
sqm
10 Nos
1.41
6.00
142.00
185.00
200.22
111.00
10 Nos
2.00
90.00
18.00
100 Nos
100 Nos
cum
48.00
8.00
0.0514
157.00
63.00
60.81
75.36
5.04
3.13
Day
Day
Day
Day
L.S.
1.30
0.90
1.05
0.105
33.80
151.50
141.60
135.25
151.50
1.00
196.95
127.44
142.01
15.91
33.80
2 147.73
21.48
2 169.21
325.38
2 494.59
1 154.90
1 154.90
9.29 Providing and fixing 30mm thick wire gauge shutters using gal
gauge of average width of aperture 1.4mm with wire of dia. 0.6
windows and clerestory windows including ISI marked Stainles
hinges with necessary screws :
9.29.1 Second class teak wood.
Code
1190
2204
7029
8221
8211
0111
0112
0114
0130
9999
Description
Details of cost for door shutters
2.00x1.08m = 2.16 sqm.
MaterialsTeak wood (2nd class)
Styles 4x209x9.5x3cm = 0.023 cum+
Top Rail - 1x110.5x9.5x3cm = 0.003cum+
Lock and bottom rail
2x110.5xl9.7x3cm = 0.013 cum+
Beadings - (2x312+2x150)x(1.2)x(1.2)cm =
0.001 cum.
Total = 0.040 cum+
Add for wastage @ 10% = 0.004 cum.
= 0.044 cum.
Say 44 cudm.
Teak wood (2nd class)
Carriage of timber
Wire gauge 2xl60x40cm = 1.28 sqm.+
Add wastage @ 10% = 0.13 sqm.
Total= 1.41 sqm.
Wire gauge
Stainless steel butt hinges (heavy weight)
75x50x2.5 mm IS : 12817 marked
Stainless steel screws 40 mm
LabourCarpenter 1st class
Carpenter 2nd class
Beldar
Mistry
Sundries
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
9.29 Providing and fixing 30mm thick wire gauge shutters using gal
gauge of average width of aperture 1.4mm with wire of dia. 0.6
windows and clerestory windows including ISI marked Stainles
hinges with necessary screws :
9.29.2 Kiln seasoned and chemically treated Hollock wood.
Code
Description
Details of cost for door shutters
2.00x1.08m = 2.16sqm.
MaterialsHollock wood
Styles 4x209x9.5x3cm = 0.023 cum+
329
Unit
Quantity
Rate
Amount
10 cudm
cum
44. 00
0.044
410.00
60.81
1 804.00
2.68
sqm
10 Nos
1.41
6.00
142.00
155.00
200.22
93.00
100 Nos
48.00
157.00
75.36
Day
Day
Day
Day
L.S.
1.20
0.80
0.95
0.08
33.80
151.50
141.60
135.25
151.50
1.00
181.80
113.28
128.49
12.12
33.80
2 644.75
26.45
2 671.20
400.68
3 071.88
1 422.17
1 422.15
Rate
Amount
Unit
Quantity
Code
2505
2504
9999
2204
7029
8221
8211
0111
0112
0114
0130
9999
Description
Top Rail - 1x110.5x9.5x3cm = 0.003cum+
Lock and bottom rail
2x110.5x19.7x3cm = 0.013 cum+
Beadings - (2x312+2x 150)x( 1.2)x( 1.2)cm =
0.001 cum.
Total = 0.040 cum+
Add for wastage @ 10% = 0.004 cum.
= 0.044 cum.
Say 44 cudm.
Hollock wood
Kiln seasoning
Chemical treatment
Carriage of timber
Wire gauge 2x160x40cm = 1.28 sqm.+
Add wastage @ 10% = 0.13 sqm.
Total= 1.41 sqm.
Wire gauge
Stainless steel butt hinges (heavy weight)
75x50x2.5 mm IS : 12817 marked
Stainless steel screws 40 mm
LabourCarpenter 1st class
Carpenter 2nd class
Beldar
Mistry
Sundries
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
Providing and fixing 30mm thick wire gauze shutters using gal
gauze of average width of aperture 1.4mm with wire of dia 0.6
windows and clerestory windows including ISl marked bright fi
black enamelled M.S. butt hinges with necessary screws :
9.30.1 Second class teak wood.
9.30
Code
Description
Details of cost for door shutters
2.00x1.08m = 2.16 sqm.
MaterialsTeak wood (2nd class)
Styles 4x209x9.5x3cm = 0.023 cum+
Top Rail - 1x110.5x9.5x3cm = 0.003cum+
Lock and bottom rail
2x110.5xl9.7x3cm = 0.013 cum+
Beadings - (2x312+2x150)x(1.2)x(1.2)cm =
0.001 cum.
Total = 0.040 cum+
Add for wastage @ 10% = 0.004 cum.
= 0.44 cum.
Say 44 cudm.
330
Unit
Quantity
Rate
Amount
10 cudm
cum
L.S.
cum
44.00
0.044
8.97
0.044
230.00
539.00
1.00
60.81
1 012.00
23.72
8.97
2.68
sqm
10 Nos
1.41
6.00
142.00
155.00
200.22
93.00
100 Nos
48.00
157.00
75.36
Day
Day
Day
Day
L.S.
1.20
0.80
0.95
0.08
33.80
151.50
141.60
135.25
151.50
1.00
181.80
113.28
128.49
12.12
33.80
1 885.44
18.85
1 904.29
285.64
2 189.93
1 013.86
1 013.85
Rate
Amount
Quantity
Code
1190
2204
0595
0597
0637
0640
0111
0112
0114
0130
7029
9999
9.30
9.30.2
Code
2505
2204
2504
9999
0595
0597
7029
Description
Teak wood (2nd class)
Carriage of timber
Wire gauge 2x160x40cm = 1.28 sqm.+
Add wastage @ 10% = 0.13 sqm.
= 1.41 sqm.
Wire gauge
Iron butt hinges 100x58x1.90 mm
Iron butt hinges 50x37x1.50 mm
M.S. screws 40 mm
M.S. screws 20 mm
LabourCarpenter 1st class
Carpenter 2nd class
Beldar
Mistry
Sundries
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
Description
Details of cost for door shutters
2.00x1.08m = 2.16sqm.
MaterialsHollock wood
Styles 4x209x9.5x3cm = 0.023 cum+
Top Rail - 1x110.5x9.5x3cm = 0.003cum+
Lock and bottom rail
2x110.5x19.7x3cm = 0.013 cum+
Beadings - (2x312+2x150)x( 1.2)x( 1.2)cm =
0.001 cum.
Total = 0.040 cum+
Add for wastage @ 10% = 0.004 cum.
= 0.44 cum.
Say 44 cudm.
Hollock wood
Carriage of timber
Kiln seasoning
Chemical treatment
Wire gauge 2xl60x40cm = 1.28 sqm.+
Add wastage @ 10% = 0.13 sqm.
= 1.41 sqm.
Wire gauge
Iron butt hinges 100x58x 1.90 mm
Iron butt hinges 50x37x1.50 mm
331
Unit
10 cudm
cum
Quantity
44.00
0.044
Rate
410.00
60.81
Amount
1 804.00
2.68
sqm
10 Nos
10 Nos
100 Nos
100 Nos
1.41
6.00
2.00
48.00
8.00
142.00
54.00
28.00
30.00
15.00
200.22
32.40
5.60
14.40
1.20
Day
Day
Day
Day
L.S.
1.20
0.80
1.00
0.10
33.80
151.50
141.60
135.25
151.50
1.00
181.80
113.28
135.25
15.15
33.80
2 539.78
25.40
2 565.18
384.78
2 949.96
1 365.72
1 365.70
d Hollock wood.
Unit
Quantity
Rate
Amount
10 cudm
cum
cum
L.S.
44.00
0.044
0.044
9.10
230.00
60.81
539.00
1.00
1012.00
2.68
23.72
9.10
sqm
10 Nos
10 Nos
1.41
6.00
2.00
142.00
54.00
28.00
200.22
32.40
5.60
Code
0637
0640
0111
0112
0114
0130
9999
9.31
9.31.1
Code
7154
9999
0595
0597
0637
0640
0156
0114
9999
Description
M.S. screws 40 mm
M.S. screws 20 mm
LabourCarpenter 1st class
Carpenter 2nd class
Beldar
Mistry
Sundries
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 2.16 sqm.
Cost of 1 sqm.
Say
Description
Details of cost of one shutter
220xl08cm = 2.38sqm.
Materials:
Factory made shutters LVL syles, rails and
panels of galvanised wire gauge
Carriage of shutters
Fittings :
Black enamelled M.S. Butt
hinges-100x58x1.9mm
Black enamelled M.S. Butt hinges-50x37x 1.5
M.S. Screws 40mm
M.S. Screws 20mm
Labour:
Carpenter Average
Beldar
Sundries
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 2.38 sqm.
Cost of 1 sqm.
Say
332
Unit
Quantity
Rate
Amount
100 Nos
100 Nos
48.00
8.00
30.00
15.00
14.40
1.20
Day
Day
Day
Day
L.S.
1.20
0.80
1.00
0.10
33.80
151.50
141.60
135.25
151.50
1.00
181.80
113.28
135.25
15.15
33.80
1780.60
17.81
1798.41
269.76
2068.17
957.49
957.50
Unit
Quantity
Rate
Amount
sqm
2.38
1328.00
3 160.64
L.S.
29.64
1.00
29.64
10 Nos
6.00
54.00
32.40
10 Nos
100 Nos
100 Nos
2.00
48.00
8.00
28.00
30.00
15.00
5.60
14.40
1.20
Day
Day
L.S.
0.52
0.60
35.88
146.55
135.25
1.00
76.21
81.15
35.88
3 437.12
34.37
3 471.49
520.72
3 992.21
1 677.40
1 677.40
9.31
9.31.2
Code
7155
9999
0595
0597
0637
0640
0156
0114
9999
9.32
Code
Description
Details of cost for 100 Nos.
Materials:
Teak wood (2nd class) 100x(50x50x50)mm =
0.0125cum
Add wastage @ 10% = 0.0013 cum.
Total =0.0138 cum.
Say 14 cudm.
Teak wood (2nd class)
Carriage of timber
Cement mortar 1:3(1 cement: 3 fine sand)
(Rate as per item No. 3.3)
Labour:
Carpenter 2nd class
Mason 2nd class
Beldar
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 100 nos.
Cost of 1 no.
Say
1189
2204
0112
0124
0114
333
Unit
Quantity
Rate
Amount
sqm
2.38
1150.00
2 737.00
L.S.
29.64
1.00
29.64
10 Nos
6.00
54.00
32.40
10 Nos
100 Nos
100 Nos
2.00
48.00
8.00
28.00
30.00
15.00
5.60
14.40
1.20
Day
Day
L.S.
0.52
0.60
35.88
146.55
135.25
1.00
76.21
81.15
35.88
3013.48
30.13
3043.61
456.54
3500.15
1470.65
1470.65
Quantity
Rate
Amount
10 cudm
cum
cum
14.00
0.014
0.002
394.00
60.81
2870.00
551.60
0.85
5.74
Day
Day
Day
0.75
0.75
0.75
141.60
141.60
135.25
106.20
106.20
101.44
872.03
8.72
880.75
132.11
1 012.86
10.13
10.15
25 mm long
Description
Details of cost of 10 nos.
Materials:
Expandable fastner 25 mm long with plastic
7312
sleeve and M.S. screws
Labour for drilling holes and making good etc.
9999
and sundries
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 10 nos.
Cost of 1 no.
Say
Description
Details of cost of 10 nos.
Materials:
Expandable fastner 32 mm long with plastic
7313
sleeve and M.S. screws
Labour for drilling holes and making good etc.
9999
and sundries
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 10 nos.
Cost of 1 no.
Say
40 mm long
Description
Code
Details of cost of 10 nos.
Materials:
Expandable fastner 40 mm long with plastic
7314
sleeve and M.S. screws
Labour for drilling holes and making good etc.
9999
and sundries
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 10 nos.
Cost of 1 no.
Say
334
Unit
Quantity
Rate
Amount
each
10.00
6.00
60.00
L.S.
20.80
1.00
20.80
80.80
0.81
81.61
12.24
93.85
9.39
9.40
Unit
Quantity
Rate
Amount
each
10.00
7.00
70.00
L.S.
26.00
1.00
26.00
96.00
0.96
96.96
14.54
111.50
11.15
11.15
Unit
Quantity
Rate
Amount
each
10.00
9.00
90.00
L.S.
26.00
1.00
26.00
116.00
1.16
117.16
17.57
134.73
13.47
13.45
9.33
9.33.4
Code
7315
9999
9.34
9.34.1
Code
1190
1238
(A)
(B)
2204
0111
0114
9999
Providing and fixing 2nd class teak wood plain lining tongu
including wooden plugs complete with necessary screws an
unexposed surface.
40 mm thick.
Description
Details of cost for 10 sqm.
Materials:
Teak wood (2nd class) 10x0.04m = 0.40cum+
Add wastage @ 10% = 0.04 cum.
= 0.44 cum.
Say 440 cudm.
Teak wood (2nd class)
Extra for selected planks
Second class teak wood plugs including
cutting brick work and fixing in cement mortar
1:3 (1 cement: 3 fine sand)
(Rate as per item no 9.32 of SH: 9)
Priming coat (Rate as per item no 13.50.1)
Carriage of timber
Labour:
For planning and fixing
Carpenter 1st class
Beldar
Sundries & screws etc.
TOTAL
Add for water charges @ 1 % except (B+A)
TOTAL
Add for contractors profit and overheads @
15% except (B+A)
Cost of 10 sqm.
Cost of 1 sqm.
Say
335
Unit
Quantity
Rate
Amount
each
10.00
11.00
110.00
L.S.
26.00
1.00
26.00
136.00
1.36
137.36
20.60
157.96
15.80
15.80
Unit
Quantity
Rate
Amount
10 cudm
10 cudm
440.00
440.00
410.00
80.00
18040.00
3520.00
each
sqm
cum
55.00
10.00
0.44
10.15
16.55
60.81
558.25
165.50
26.76
Day
Day
L.S.
2.15
1.62
53.82
151.50
135.25
1.00
325.72
219.10
53.82
22909.15
221.85
23131.00
3361.09
26 492.09
2649.21
2649.20
9.34
9.34.2
Code
1190
1238
2204
(A)
(B)
0111
0114
9999
9.34
9.34.3
Code
1190
1231
2204
(A)
(B)
0111
0112
0114
9999
Providing and fixing 2nd class teak wood plain lining tongued a
including wooden plugs complete with necessary screws and pr
unexposed surface.
25 mm thick.
Description
Details of cost for 10 sqm.
Materials:
Teak wood 2nd class 10x0.025 = 0.25cum+
Add wastage @ 10% = 0.025 cum.
= 0.275 cum.
Say 275 cudm.
Teak wood (2nd class)
Extra for selected planks
Carriage of timber
Second class teak wood plugs including
cutting brick work and fixing in cement mortar
1:3 (1 cement: 3 fine sand)
(Rate as per item no 9.32 of SH: 9)
Priming coat (Rate as per item no 13.50.1)
Labour:
Carpenter 1 st class
Beldar
Sundries & screws etc.
TOTAL
Add for water charges @ 1 % except (B+A)
TOTAL
Add for contractors profit and overheads @
15% except (B+A)
Cost of 10 sqm.
Cost of 1 sqm.
Say
Providing and fixing 2nd class teak wood plain lining tongued a
including wooden plugs complete with necessary screws and pr
unexposed surface.
20 mm thick
Description
Details of cost for 10 sqm.
Materials:
Teak wood (2nd class) 10x0.02m = 0.20cum.+
Add wastage @ 10% = 0.02 cum.
= 0.22 cum.
Say 220 cudm.
Teak wood (2nd class)
Extra for selected planks
Carriage of timber
Second class teak wood plugs including
cutting brick work and fixing in cement mortar
1:3 (1 cement: 3 fine sand)
(Rate as per item no 9.32 of SH: 9)
Priming coat (Rate as per item no 13.50.1)
Labour:
Carpenter 1 st class
Carpenter 2nd class
Beldar
Sundries & screws etc.
336
Unit
Quantity
Rate
Amount
10 cudm
10 cudm
cum
275.00
275.00
0.275
410.00
80.00
60.81
11275.00
2200.00
16.72
each
sqm
55.00
10.00
10.15
16.55
558.25
165.50
Day
Day
L.S.
2.15
1.62
53.82
151.50
135.25
1.00
325.72
219.10
53.82
14814.11
140.90
14955.01
2134.69
17089.70
1708.97
1708.95
Unit
Quantity
Rate
Amount
10 cudm
10 cudm
cum
220.00
220.00
0.22
410.00
72.00
60.81
9020.00
1584.00
13.38
each
sqm
55.00
10.00
10.15
16.55
558.25
165.50
Day
Day
Day
L.S.
1.08
0.80
1.08
53.82
151.50
141.60
135.25
1.00
163.62
113.28
146.07
53.82
Code
Description
TOTAL
Add for water charges @ 1 % except (A+B)
TOTAL
Add for contractors profit and overheads @
15% except (A+B)
Cost of 10 sqm.
Cost of 1 sqm.
Say
9.34
Providing and fixing 2nd class teak wood plain lining tongued a
including wooden plugs complete with necessary screws and pr
unexposed surface.
9.34.4
Code
1190
1231
2204
(A)
0111
0112
0114
(B)
9999
9.35
9.35.1
Code
7477
9999
9999
12 mm thick
Description
Details of cost for 10 sqm.
Wood-Second class teak wood 10x0.012 = 0.12
cum+
Add wastage @ 10% = 0.012 cum.
= 0.132 cum.
Say 132 cudm.
Second class teak wood
Extra for selected planks
Carriage of timber
Second class teak wood plugs including
cutting brick work and fixing in cement mortar
1:3 (1 cement: 3 fine sand)
(Rate as per item no 9.32 of SH: 9)
Labour:
Carpenter 1 st class
Carpenter 2nd class
Beldar
Priming coat (Rate as per item no 13.50.1 of
SH : Finishing)
Sundries & screws etc.
TOTAL
Add for water charges @ 1 % except (A+B)
TOTAL
Add for contractors profit and overheads @
15% except (A+B)
Cost of 10 sqm.
Cost of 1 sqm.
Say
Providing and fixing in wall lining flat pressed three layer (med
board or graded wood prelaminated one side decorative lamina
balancing lamination Grade I,Type II, IS : 12823 marked includin
unexposed surface, with necessary fixing arrangement and scre
12 mm thick
Description
Details of cost for 10 sqm.
MaterialsParticle board (three layer medium density)
12mm thick = 10 sqm.+
Add wastage @ 10% = 1 sqm.
= 11 sqm.
Particle board (three layer medium density)
Carriage of particle board
Sundries and screws
(A)
Priming coat
(Rate as per item no 13.50.1 of SH : Finishing)
Labour:
337
Unit
Quantity
Rate
Amount
11 817.92
110.94
11 928.86
1 680.77
13 609.63
1 360.96
1 360.95
Unit
Quantity
Rate
Amount
10 cudm
10 cudm
cum
132.00
132.00
0.132
410.00
72.00
60.81
5412.00
950.40
8.03
each
55.00
10.15
558.25
Day
Day
Day
sqm
1.08
0.80
1.08
10.00
151.50
141.60
135.25
16.55
163.62
113.28
146.07
165.50
L.S.
53.82
1.00
53.82
7570.97
68.47
7639.44
1037.35
8676.79
867.68
867.70
Quantity
Rate
Amount
sqm
L.S.
L.S.
11.00
13.52
26.91
595.00
1.00
1.00
6 545.00
13.52
26.91
sqm
10.00
16.55
165.50
Code
0112
0114
7048
Description
Carpenter 2nd class
Beldar
Rawl plug 50 mm (designation 10 no)
TOTAL
Add for water charges @ 1% on all except on (A)
TOTAL
Add for contractors profit and overheads @
15% except (A)
Cost of 10 sqm.
Cost of 1 sqm.
Say
9.35 Providing and fixing in wall lining flat pressed three layer (med
board or graded wood prelaminated one side decorative lamina
balancing lamination Grade I, Type II, IS : 12823 marked includ
unexposed surface, with necessary fixing arrangement and scr
9.35.2
Code
7478
9999
9999
(A)
0112
0114
7048
18 mm thick
Description
Details of cost for 10 sqm.
MaterialsParticle board (three layer medium density)
18 mm thick = 10 sqm.+
Add wastage @ 10% = 1 sqm.
= 11 sqm.
Particle board (three layer medium density)
Carriage of particle board
Sundries and screws
Priming coat
(Rate as per item no 13.50.1 of SH : Finishing)
Labour:
Carpenter 2nd class
Beldar
Rawl plug 50 mm (designation 10 no)
TOTAL
Add for water charges @ 1% on all except on A
TOTAL
Add for contractors profit and overheads @
15% except (A)
Cost of 10 sqm.
Cost of 1 sqm.
Say
9.35 Providing and fixing in wall lining flat pressed three layer (med
board or graded wood prelaminated one side decorative lamina
balancing lamination Grade I, Type II, IS : 12823 marked includ
unexposed surface, with necessary fixing arrangement and scr
9.35.3
25 mm thick
Description
Code
Details of cost for 10 sqm.
MaterialsParticle board (three layer medium density)
25 mm thick = 10 sqm.+
Add wastage @ 10% = 1 sqm.
= 11 sqm.
Prelaminated particle board with one side
7479
decorative and other side balancing
338
Unit
Day
Day
each
Quantity
1.28
1.43
55.00
Rate
141.60
135.25
7.00
Amount
181.25
193.41
385.00
7510.59
73.45
7584.04
1112.78
8696.82
869.68
869.70
Quantity
Rate
Amount
sqm
L.S.
L.S.
11.00
13.52
26.91
716.00
1.00
1.00
7876.00
13.52
26.91
sqm
10.00
16.55
165.50
Day
Day
each
1.28
1.43
55.00
141.60
135.25
7.00
181.25
193.41
385.00
8841.59
86.76
8 928.35
1314.43
10 242.78
1024.28
1024.30
Quantity
Rate
Amount
sqm
11.00
775.00
8525.00
Code
(A)
0112
0114
Description
lamination, flat pressed 3 layer & graded
(medium density) Grade I, Type II conforming
to IS : 12823 (exterior grade)25 mm thick
Carriage of particle board
9999
Sundries and screws
9999
Priming coat
(Rate as per item no 13.50.1 of SH : Finishing)
Labour:
Carpenter 2nd class
Beldar
Rawl plug 50 mm (designation 10 no)
7048
TOTAL
Add for water charges @ 1% on all except onA
ATOTAL
Add for contractors profit and overheads @
15% except (A)
Cost of 10 sqm.
Cost of 1 sqm.
Say
2505
2204
0111
0114
(A)
9999
7048
9999
Hollock wood
Description
Details of cost for 5 no. battens of size
500cmx50mmx25mm (31.25 cudm)
MaterialsHollock wood- 5x5.00x0.50x0.025 = 0.03125
cum+
Add wastage @ 5% = 0.00156 cum.
= 0.03281 cum.
Say 33 cudm.
Hollock wood
Carriage of timber
Labour:
Carpenter 1 st class
Beldar
Sundries
Painting with ready mixed priming coat on
ground 5x500x15 cm =3.75 sqm
(Rate as per item no 13.50.1)
Rawl plug 50 mm (designation 10 no)
Labour for drilling holes steel tape sundries
etc.
TOTAL
Add water charges @ 1 % on all except on cost
of priming coat (A)
TOTAL
Add contractors profit and overheads @ 15%
on all except on cost of priming coat (A)
Cost of 31.25 cudm.
Cost of 1 cum.
Say
339
Unit
Quantity
Rate
Amount
L.S.
L.S.
13.52
26.91
1.00
1.00
13.52
26.91
sqm
10.00
16.55
165.50
Day
Day
each
1.28
1.43
55.00
141.60
135.25
7.00
181.25
193.41
385.00
9490.59
93.25
9583.84
1412.75
10996.59
1099.66
1099.65
Unit
Quantity
Rate
Amount
10 cudm
cum
33.00
0.033
230.00
60.81
759.00
2.01
Day
Day
L.S.
1.00
0.25
6.76
151.50
135.25
1.00
151.50
33.81
6.76
sqm
each
L.S.
3.75
55.00
71.50
16.55
7.00
1.00
62.06
385.00
71.50
1471.64
14.10
1485.74
213.55
1699.29
54377.28
54377.30
9.37
9.37.1
Code
0759
9999
(B)
0111
0114
0130
9999
(A)
9.38
Providing and fixing 4mm thick coir veneer board, ISI marked
lining with necessary screws, priming coat on unexposed surf
Code
Description
Details of cost for 10 sqm.
MaterialsCoir veneered board 4mm thick = 10sqm.+
Add for wastage @ 20% = 2 sqm.
= 12 sqm.
Coir veneered board 4mm thick
Carriage of Coir veneered board
Wooden plugs including cutting brick work
and fixing in cement mortar
(Rate as per item no 9.32 of SH : Wood work)
LabourCarpenter 1st class
Beldar
Mistry
20mm nails without head for fixing ply
Painting with ready mixed priming coat
(Rate as per item no 13.50.l of SH : Finishing)
TOTAL
Add for water charges @ 1% on all except (B+A)
TOTAL
Add for contractors profit and overheads @
15% on all except (B+A)
Cost of 10 sqm.
Cost of 1 sqm.
Say
7552
9999
(B)
0111
0114
0130
9999
(A)
340
d manufacture.
Unit
Quantity
Rate
Amount
sqm
L.S.
12.00
5.46
250.00
1.00
3 000.00
5.46
each
55.00
10.15
558.25
Day
Day
Day
L.S.
3.80
4.60
0.60
53.82
151.50
135.25
151.50
1.00
575.70
622.15
90.90
53.82
sqm
10.00
16.55
165.50
5 071.78
43.48
5 115.26
658.73
5 773.99
577.40
577.40
Quantity
Rate
Amount
sqm
L.S.
12.00
5.46
235.00
1.00
2 820.00
5.46
each
55.00
10.15
558.25
Day
Day
Day
L.S.
3.80
4.60
0.60
53.82
151.50
135.25
151.50
1.00
575.70
622.15
90.90
53.82
sqm
10.00
16.55
165.50
4 891.78
41.68
4 933.46
631.46
5 564.92
556.49
556.50
341
9.39
7478
9999
7048
9999
0112
0114
9999
Description
Unit
9.39 Providing and fixing skirting of prelaminated with (one side deco
side balancing lamination) flat pressed, 3 layer or graded partic
density) Grade I, Type II, IS : 12823 marked, with necessary fix
and screws including drilling necessary holes for rawl plugs etc.
on unexposed surface complete :
9.39.2 25 mm thick
Description
Details of cost for skirting 200mm wide and
30m long Area = 0.2x30= 6 sqm.
Area = 0.2x30= 6 sqm.
MaterialsTeak shade prelaminated Particle board
(three layer medium density) = 6.0 sqm.+
Add wastage @ 10% = 0.6sqm.
= 6.6 sqm.
Particle board 25 mm thick
7479
Carriage of particle board
9999
Code
Unit
sqm
L.S.
Quantity
6.60
8.11
102.00
130.00
0.77
0.86
53.82
6.00
Rate
Amount
716.00
1.00
7.00
1.00
4725.60
8.11
714.00
130.00
141.60
135.25
1.00
109.03
116.32
53.82
16.55
99.30 (A)
5956.18
58.57
6014.75
887.32
6902.07
1150.35
1150.35
Quantity
6.60
8.11
Rate
Amount
775.00
1.00
5 115.00
8.11
Description
Code
0112
0114
(A)
9.40
9.40.1
9.40.1.1
Description
Code
Details of cost for beading for a window of
size 140x110cm i.e. 500cm long (5 metre)
MaterialsTeak wood Ilnd class in planks
500x5x1.2cm = 0.003 cum+
Add for wastage @ 10% = 0.0003 cum.
= 0.0033 cum. Say 3.3 cudm.
Second class teak wood
1190
Carriage of timber
2204
Iron screws 40 mm
0637
Painting with priming coat Area =
500(5+1.2+1.2) = 0.37 sqm
(Rate as per item no 13.50.1 of SH : Finishing)
(B)
LabourFor plaining, fixing and making design
Carpenter 1st class
0111
TOTAL
Add for water charges @ 1% on all except (B)
TOTAL
Add for contractors profit and overheads @
15% on all except (B)
Cost of 5 m.
Cost of 1m
Say
342
Unit
Quantity
Rate
Amount
each
L.S.
102.00
130.00
7.00
1.00
714.00
130.00
Day
Day
L.S.
0.77
0.86
53.82
141.60
135.25
1.00
109.03
116.32
53.82
sqm
6.00
16.55
99.30
6 345.58
62.46
6 408.04
946.31
7 354.35
1 225.73
1 225.70
Unit
Quantity
Rate
Amount
10 cudm
cum
100 Nos
3.30
0.0033
36.00
410.00
60.81
30.00
135.30
0.20
10.80
sqm
0.37
16.55
6.12
Day
0.53
151.50
80.30
232.72
2.27
234.99
34.33
269.32
53.86
53.85
9.40
9.40.1
9.40.1.2
Code
1190
2204
0637
(B)
0111
Description
Details of cost for beading of a window of size
140x110cm i.e. 500cm. long (5metre)
MaterialsTeak wood Ilnd class in planks
500x5x2.0cm = 0.005cum+
Add for wastage @ 10% = 0.0005 cum.
= 0.0055 cum. Say 5.5 cudm.
Second class teak wood
Carriage of timber
Iron screws 40 mm
Painting with priming coat Area = 500(5+2+2)
= 0.45 sqm
(Rate as per item no 13.50.1 of SH : Finishing)
LabourFor plaining, fixing and making design
Carpenter 1 st class
TOTAL
Add for water charges @ 1% on all except (B)
TOTAL
Add for contractors profit and overheads @
15% on all except (B)
Cost of 5 m.
Cost of 1m
Say
9.40
2505
2204
0637
(B)
0111
Description
Details of cost for beading for a window of
size 140x110cm i.e. 500cm long (5 metre)
MaterialsHollock wood
500x5x1.2cm = 0.003 cum+
Add for wastage @ 10% = 0.0003 cum.
= 0.0033 cum. Say 3.3 cudm.
Hollock wood
Carriage of timber
Iron screws 40 mm
Painting with priming coat Area =
500(5+1.2+1.2) = 0.37 sqm
(Rate as per item no 13.50.l of SH : Finishing)
LabourFor plaining, fixing and making design
Carpenter 1 st class
TOTAL
Add for water charges @ 1% on all except (B)
TOTAL
Add for contractors profit and overheads @
15% on all except (B)
Cost of 5 m.
Cost of 1m
Say
343
Unit
Quantity
Rate
Amount
10 cudm
cum
100 Nos
5.50
0.0055
36.00
410.00
60.81
30.00
225.50
0.33
10.80
sqm
0.45
16.55
7.45
Day
0.53
151.50
80.30
324.38
3.17
327.55
48.02
375.57
75.11
75.10
Unit
Quantity
Rate
Amount
10 cudm
cum
100 Nos
3.30
0.0033
36.00
230.00
60.81
30.00
75.90
0.20
10.80
sqm
0.37
16.55
6.12
Day
0.53
151.50
80.30
173.32
1.67
174.99
25.33
200.32
40.06
40.05
9.40
9.40.2
9.40.2.2
Code
2505
2204
0637
(B)
0111
9.41
9.41.1
Code
1190
2204
0111
0112
0114
0130
9999
Description
Details of cost for beading for a window of
size 140x110cm i.e. 500cm long (5 metre)
MaterialsHollock wood
500x5x200cm = 0.005 cum+
Add for wastage @ 10% = 0.0005 cum.
= 0.0055 cum. Say 5.5 cudm.
Hollock wood
Carriage of timber
Iron screws 40 mm
Painting with priming coat Area = 500(5+2+2)
= 0.45 sqm
(Rate as per item no 13.50.1 of SH : Finishing)
LabourFor plaining, fixing and making design
Carpenter 1 st class
TOTAL
Add for water charges @ 1% on all except (B)
TOTAL
Add for contractors profit and overheads @
15% on all except (B)
Cost of 5 m.
Cost of lm
Say
344
Unit
Quantity
Rate
Amount
10 cudm
cum
100 Nos
5.50
0.0055
36.00
230.00
60.81
30.00
126.50
0.33
10.80
sqm
0.45
16.55
7.45
Day
0.53
151.50
80.30
225.38
2.18
227.56
33.02
260.58
52.12
52.10
Quantity
Rate
Amount
10 cudm
cum
32.00
0.03
410.00
60.81
1 312.00
1.95
Day
Day
Day
Day
L.S.
0.75
1.00
0.50
0.10
33.80
151.50
141.60
135.25
151.50
1.00
113.62
141.60
67.62
15.15
33.80
1 685.74
16.86
1 702.60
255.39
1 957.99
890.00
890.00
9.42
Code
Description
Details of cost for a pelmet 2m long
Materials(i) 18mm thick particle board (medium density
exterior grade)
Front-1x1.7x0.15=0.255sqm.+
Sides-2xO. 15x0.15= 0.045sqm.
= 0.300sqm.+
Add wastage @5% = 0.015sqm.
= 0.315sqm. Say 0.32 sqm.
6mm thick commercial ply wood
Top-lxl.7x0.15= 0.255sqm.+
Add wastage @ 5% = 0.013 sqm.
= 0.268 sqm. Say 0.27 sqm.
Ply wood 5 ply with commercial ply on both
faces 6 mm thick
Nickle plated M.S. pipe 20 mm dia.
Nickle plated M.S. Brackets for curtain rod 20 each
mm
Carriage of material
M.S. flat 25x3mm and 10cm long over
brackets
Rawl plug 50 mm (designation 10 no)
LabourCarpenter 2nd class
Beldar
Mistry
Sundries
TOTAL
Add for water charge @ 1%
TOTAL
Add for contractors profit and overheads @
15%
Cost of 2 m
Cost of lm.
Say
7055
2412
7034
7035
9999
9999
7048
0112
0114
0130
9999
9.43
Code
Description
Details of cost for a pelmet 2m long
Materials(i) 18mm thick Coir veneered board
Front-1 x 1.7x0.15= 0.255sqm.+
Sides-2xO. 15x0.15= 0.045sqm.
= 0.300sqm.+
345
Quantity
Rate
Amount
sqm
0.32
301.00
96.32
sqm
0.27
282.00
76.14
metre
1.65
2.00
54.00
3.00
89.10
6.00
L.S.
L.S.
0.52
8.06
1.00
1.00
0.52
8.06
each
2.00
7.00
14.00
Day
Day
Day
L.S.
0.18
0.18
0.11
2.73
141.60
135.25
151.50
1.00
25.49
24.34
16.66
2.73
359.36
3.59
362.95
54.44
417.39
208.70
208.70
Quantity
Rate
Amount
Code
7556
7553
7034
7035
9999
9999
7048
0112
0114
0130
9999
9.44
9.44.1
Description
Add wastage @5% = 0.015sqm.
= 0.315sqm. Say 0.32 sqm.
Coir veneered board 18mm thick
6mm thick commercial ply wood
Top-1 x 1.7x0.15= 0.255sqm.+
Add wastage @ 5% = 0.013 sqm.
= 0.268 sqm. Say 0.27 sqm.
Coir veneered board 6mm thick
Nickle plated M.S. pipe 20 mm dia.
Nickle plated M.S. Brackets for curtain rod 20 each
mm
Carriage of material
M.S. flat 25x3mm and 10cm long over
brackets
Rawl plug 50 mm (designation 10 no)
LabourCarpenter 2nd class
Beldar
Mistry
Sundries
TOTAL
Add for water charge @ 1%
TOTAL
Add for contractors profit and overheads @
15%
Cost of 2 m
Cost of lm.
Say
Code
Description
Details of cost for a pelmet 2m long
Materials(i) 18mm thick particle board (medium density
exterior grade)
Front-lxl.7x0.15= 0.255sqm.+
Sides-2xO. 15x0.15= 0.045sqm.
= 0.300sqm.+ Add wastage @5% = 0.015sqm.
= 0.315sqm. Say 0.32 sqm.
0347
346
Unit
Quantity
Rate
Amount
sqm
0.32
820.00
262.40
sqm
metre
0.27
1.65
2.00
308.00
54.00
3.00
83.16
89.10
6.00
L.S.
L.S.
0.52
8.06
1.00
1.00
0.52
8.06
each
2.00
7.00
14.00
Day
Day
Day
L.S.
0.18
0.18
0.11
2.73
141.60
135.25
151.50
1.00
25.49
24.34
16.66
2.73
532.46
5.32
537.78
80.67
618.45
309.23
309.20
Unit
Quantity
Rate
Amount
sqm
0.32
102.00
32.64
32.64
0.33
32.97
4.95
37.92
18.96
18.95
9.44
Description
9.45 Providing and fixing teak wood lipping of size 25x3 mm in pelme
Description
Details of cost for 10 metre
MaterialsLipping with teak wood 25x3 mm
7049
LabourCarpenter 2nd class
0112
Beldar
0114
TOTAL
Add for water charge @ 1 %
TOTAL
Add for contractors profit and overheads @
15%
Cost for 10 meter
Cost of lm.
Say
Code
9.46 Providing and fixing curtain rods of 1.25 mm thick chromium pla
with two chromium plated brass brackets fixed with C.P. brass s
plugs, etc., wherever necessary complete :
9.46.1 12 mm dia.
Description
Details of cost for 2m long
MaterialsC.P. brass curtain rod 12 mm dia
0590
C.P. brass brackets
7023
C.P. brass screws
9999
Carriage
9999
Wooden plugs including cutting brick work
and fixing in cement mortar 1:3 (1 cement: 3
fine sand)
Code
347
Quantity
Rate
Amount
sqm
0.32
366.00
117.12
117.12
1.17
118.29
17.74
136.03
68.02
68.00
Quantity
Rate
Amount
metre
10.00
16.00
160.00
Day
Day
0.25
0.25
141.60
135.25
35.40
33.81
229.21
2.29
231.50
34.72
266.22
26.62
26.60
Unit
Quantity
Rate
Amount
metre
each
L.S.
L.S.
2.00
2.00
4.03
1.56
122.00
5.00
1.00
1.00
244.00
10.00
4.03
1.56
Code
(B)
Description
(Rate as per item no 9.32 of SH : Wood work)
Labour
9999
Sundries
9999
TOTAL
Add for water charge @ 1% on all except (B)
TOTAL
Add for contractors profit and overheads @
15% on all except (B)
Cost of 2m
Cost of lm.
Say
9.46 Providing and fixing curtain rods of 1.25 mm thick chromium pla
with two chromium plated brass brackets fixed with C.P. brass s
plugs, etc., wherever necessary complete :
9.46.2 20 mm dia.
Code
0591
(B)
7023
9999
9999
9999
9999
Description
Details of cost for 2m long
MaterialsC.P. brass curtain rod 20 mm dia
C.P. brass brackets
C.P. brass screws
Carriage
Wooden plugs including cutting brick work
and fixing in cement mortar 1:3 (1 cement: 3
fine sand)
(Rate as per item no 9.32 of SH : Wood work)
Labour
Sundries
TOTAL
Add for water charge @ 1% on all except (B)
TOTAL
Add for contractors profit and overheads @
15% on all except (B)
Cost of 2m
Cost of lm.
Say
9.46 Providing and fixing curtain rods of 1.25 mm thick chromium pla
with two chromium plated brass brackets fixed with C.P. brass s
plugs, etc., wherever necessary complete :
9.46.3 25 mm dia.
Description
Details of cost for 2m long
MaterialsC.P. brass curtain rod 25 mm dia
0592
C.P. brass brackets
7023
C.P. brass screws
9999
Carriage
9999
Wooden plugs including cutting brick work
and fixing in cement mortar 1:3 (1 cement: 3
fine sand)
(Rate as per item no 9.32 of SH : Wood work)
(B)
Code
348
Unit
each
L.S.
L.S.
Quantity
2.00
2.73
1.56
Rate
10.15
1.00
1.00
Amount
20.30
2.73
1.56
284.18
2.64
286.82
39.98
326.80
163.40
163.40
Unit
Quantity
Rate
Amount
metre
each
L.S.
L.S.
2.00
2.00
4.03
1.56
143.00
5.00
1.00
1.00
286.00
10.00
4.03
1.56
each
L.S.
L.S.
2.00
2.73
1.56
10.15
1.00
1.00
20.30
2.73
1.56
326.18
3.06
329.24
46.34
375.58
187.79
187.80
Unit
Quantity
Rate
Amount
metre
each
L.S.
L.S.
2.00
2.00
4.03
1.56
239.00
5.00
1.00
1.00
478.00
10.00
4.03
1.56
each
2.00
10.15
20.30
Code
Description
Labour
9999
Sundries
9999
TOTAL
Add for water charge @ 1% on all except (B)
TOTAL
Add for contractors profit and overheads @
15% on all except (B)
Cost of 2m
Cost of lm.
Say
9.47 Providing and fixing nickel plated M.S. pipe curtain rods with n
9.47.1 20 mm dia (heavy type)
Code
7042
7035
9999
9999
7048
9999
9999
Description
Details of cost for 2m long.
Materials :
(i) Nickel plated M.S. pipe 20 mm dia
(ii) Nickel plated M.S. bracket
(iii) Screws
(iv) Carriage
(v) Rawl plug 50 mm (designation 10 no)
(vi) Labour including fixing rawl plug
(vii) Sundries
TOTAL
Add for water charge @ 1 %
TOTAL
Add for contractors profit and overheads @
15%
Cost for 2 meter
Cost of lm.
Say
9.47 Providing and fixing nickel plated M.S. pipe curtain rods with n
9.47.2 25 mm dia (heavy type)
Description
Details of cost for 2m long.
Materials:
(i) Nickel plated M.S. pipe 25 mm dia
7043
(ii) Nickel plated M.S. bracket
7036
(iii) Screws
0999
(iv) Carriage
9999
7048
(v) Rawl plug 50 mm (designation 10 no)
9999
(vi) Labour including fixing rawl plug
9999
(vii) Sundries
TOTAL
Add for water charge @ 1%
TOTAL
Add for contractors profit and overheads @
15%
Cost for 2 meter
Cost of lm.
Say
Code
349
Unit
L.S.
L.S.
Quantity
2.73
1.56
Rate
1.00
1.00
Amount
2.73
1.56
518.18
4.98
523.16
75.43
598.59
299.30
299.30
Quantity
Rate
Amount
metre
each
L.S.
L.S.
each
L.S.
L.S.
2.00
2.00
4.03
1.56
2.00
5.20
1.56
44.00
3.00
1.00
1.00
7.00
1.00
1.00
88.00
6.00
4.03
1.56
14.00
5.20
1.56
120.35
1.20
121.55
18.23
139.78
69.89
69.90
Quantity
Rate
Amount
metre
each
L.S.
L.S.
each
L.S.
L.S.
2.00
2.00
4.03
1.56
2.00
5.20
1.56
49.00
4.00
1.00
1.00
7.00
1.00
1.00
98.00
8.00
4.03
1.56
14.00
5.20
1.56
132.35
1.32
133.67
20.05
153.72
76.86
76.85
9.48
9.48.1
Code
1003
1008
2205
9999
9999
0102
0114
9.48
9.48.2
Code
1003
350
Quantity
Rate
Amount
quintal
0.165
3 050.00
503.25
quintal
tonne
0.04
0.02
2 900.00
47.29
116.00
0.95
L.S.
L.S.
26.91
19.76
1.00
1.00
26.91
19.76
Day
Day
0.86
1.10
151.50
135.25
130.29
148.78
945.94
9.46
955.40
143.31
1 098.71
59.26
59.25
Quantity
Rate
Amount
quintal
0.165
3 050.00
503.25
Code
1008
2205
9999
9999
0102
0114
7048
9999
Description
5.70m @ 0.63kg/m = 3.59kg+
Add wastage @ 10% = 0.36kg.
= 3.95kg. Say 4 kg. or 0.04 quintal
M.S. flat
Carriage of steel 0.165 + 0.04 = 0.205 q =
0.0205 tonne. Say 0.02 tonne
Sundries
Welding charges
LabourBlacksmith 1st class
Beldar
Rawl plug 50 mm (designation 10 no)
Fixing of rawl plugs
TOTAL
Add for water charge @ 1 %
TOTAL
Add for contractors profit and overheads @
15%
Cost for 18.54 kg.
Cost for 1 kg.
Say
1015
9999
1190
2204
0112
0114
9999
Description
Details of cost for a window of size
140x110cm =1.54sqm.
MaterialsExpended metal -20x60mm mesh 3.2mm wide
= 1.4x1.1m = 1.54sqm.+
Add wastage @ 10% = 0.15sqm.
= 1.69 sqm.
Expended metal -.
Carriage
Second class teak wood beading
5mx62mmx19mm = 0.0059cum.+
Add wastage @ 10% = 0.00059cum.
= 0.00649cum. Say 6 cudm.
Second class teak wood
Carriage of timber
LabourCarpenter 2nd class
Beldar
Sundries
TOTAL
Add for water charge @ 1 %
TOTAL
Add for contractors profit and overheads @
15%
Cost of 1.54 sqm.
Cost of 1 sqm.
Say
351
Unit
Quantity
Rate
Amount
quintal
tonne
0.04
0.02
2 900.00
47.29
116.00
0.95
L.S.
L.S.
26.91
19.76
1.00
1.00
26.91
19.76
Day
Day
each
L.S.
0.86
1.10
8.00
26.00
151.50
135.25
7.00
1.00
130.29
148.78
56.00
26.00
1 027.94
10.28
1 038.22
155.73
1 193.95
64.40
64.40
Quantity
Rate
Amount
sqm
L.S.
1.69
1.82
200.00
1.00
338.00
1.82
10 cudm
cum
6.00
0.01
410.00
60.81
246.00
0.36
Day
Day
L.S.
0.33
0.25
26.91
141.60
135.25
1.00
46.73
33.81
26.91
693.63
6.94
700.57
105.09
805.66
523.16
523.15
9.50
Code
Description
Details of cost for a window of size
140x110cm =1.54sqm.
MaterialsHard drawn steel wire fabric -20x60mm mesh
3.2mm wide = 1.4x1.1m= 1.54sqm.+
Add wastage @ 10% = 0.15sqm.
= 1.69 sqm.
Hard drawn steel wire fabric
Carriage of wire fabric
Second class teak wood beading
5mx62mmx19mm = 0.00059cum.+
Add wastage @ 10% = 0.00059cum.
= 0.000649cum. Say 6 cudm.
Second class teak wood
Carriage of timber
LabourCarpenter 2nd class
Beldar
Sundries
TOTAL
Add for water charge @ 1 %
TOTAL
Add for contractors profit and overheads @
15%
Cost of 1.54 sqm.
Cost of 1 sqm.
Say
1021
9999
1190
2204
0112
0114
9999
9.51
9.51.1
Code
7029
9999
1190
2204
0112
0114
352
Quantity
Rate
Amount
sqm
L.S.
1.69
1.82
310.00
1.00
523.90
1.82
10 cudm
cum
6.00
0.006
410.00
60.81
246.00
0.36
Day
Day
L.S.
0.33
0.25
19.76
141.60
135.25
1.00
46.73
33.81
19.76
872.38
8.72
881.10
132.16
1 013.26
657.96
657.95
X19 mm.
Unit
Quantity
Rate
Amount
sqm
L.S.
1.69
1.82
142.00
1.00
239.98
1.82
10 cudm
cum
6.00
0.006
410.00
60.81
246.00
0.36
Day
Day
0.33
0.25
141.60
135.25
46.73
33.81
Code
Description
Sundries
9999
TOTAL
Add for water charge @ 1%
TOTAL
Add for contractors profit and overheads @
15%
Cost of 1.54 sqm.
Cost of 1 sqm.
Say
9.51 Providing and fixing fly proof galvanised M.S. wire gauge to win
windows using galvanised M.S. wire gauge with average width
in both directions with wire of dia. 0.63 mm.
With 12 mm mild steel U beading.
9.51.2
Code
7029
9999
7349
0112
0114
9999
Description
Details of cost for a window of size
140x110cm =1.54sqm.
MaterialsWire gauge -20x60mm mesh 3.2mm wide =
1.4x1.1m = 1.54sqm.+
Add wastage @ 10% = 0.15sqm.
= 1.69 sqm.
Wire gauge
Carriage of wire fabric
12 mm mild steel U beading
LabourCarpenter 2nd class
Beldar
Sundries
TOTAL
Add for water charge @ 1 %
TOTAL
Add for contractors profit and overheads @
15%
Cost of 1.54 sqm.
Cost of 1 sqm.
Say
9.52 Deduct for fixing 75x25 mm hard drawn steel wire fabric of wei
7.75 Kg. per sqm in panelled and glazed door and window shut
sheet 4 mm thick.
Code
Description
Details of cost for 1 sqm.
MaterialsHard drawn steel wire fabric
1021
Glass 10 kg/sqm (4 mm)
2406
Difference of cost
Add for water charge @ 1 %
TOTAL
Add for contractors profit and overheads @
15%
Extra cost for 1 sqm.
Say
353
Unit
L.S.
Quantity
19.76
Rate
1.00
Amount
19.76
588.46
5.88
594.34
89.15
683.49
443.82
443.80
Unit
Quantity
Rate
Amount
sqm
L.S.
metre
1.69
1.82
5.00
142.00
1.00
9.00
239.98
1.82
45.00
Day
Day
L.S.
0.33
0.25
19.76
141.60
135.25
1.00
46.73
33.81
19.76
387.10
3.87
390.97
58.65
449.62
291.96
291.95
Quantity
Rate
sqm
sqm
1.00
1.00
310.00
248.00
Amount
310.00
248.00
62.00
0.62
62.62
9.39
72.01
72.00
9.53
Code
Description
Details of cost for 1 hold fast
MaterialsM.S.flat 40x5mm 40cm long @ 1.68 kg/m =
1008
9999
(A)
9999
0103
0123
0114
9.54
9.54.1
Code
1199
2204
(A)
0112
0114
0100
9999
354
Quantity
Rate
Amount
quintal
0.0067
2 900.00
19.43
L.S.
1.82
1.00
1.82
cum
L.S.
0.005
5.46
3 112.70
1.00
15.56
5.46
Day
Day
Day
0.03
0.03
0.03
141.60
151.50
135.25
4.25
4.54
4.06
55.12
0.40
55.52
5.99
61.51
61.50
Quantity
Rate
Amount
10 cudm
cum
207.10
0.207
218.00
60.81
4514.78
12.59
sqm
0.54
12.80
6.91
Day
Day
Day
L.S.
0.70
1.45
0.70
26.91
141.60
135.25
138.45
1.00
99.12
196.11
96.92
26.91
4953.34
49.46
5002.80
749.38
5752.18
28335.86
28335.90
Code
2466
2204
(A)
0112
0114
0100
9999
Description
Providing and fixing ISI marked M.S. pressed butt hinges bright fi
necessary screws etc. complete :
9.55.1 125x65x2.12 mm
9.55
Code
0594
0635
9999
0112
0114
Description
355
Quantity
Rate
Amount
10 cudm
cum
207.10
0.207
217.00
60.81
4494.07
12.59
sqm
0.54
12.80
6.91
Day
Day
Day
L.S.
0.70
1.45
0.70
26.91
141.60
135.25
138.45
1.00
99.12
196.11
96.92
26.91
4932.63
49.26
4981.89
746.25
5728.14
28217.44
28217.40
Unit
Quantity
Rate
Amount
10 Nos
100 Nos
L.S.
10.00
80.00
2.73
78.00
40.00
1.00
78.00
32.00
2.73
Day
Day
0.14
0.09
141.60
135.25
19.82
12.17
144.72
1.45
146.17
21.93
168.10
16.81
16.80
9.55
9.55.2
Code
0595
0637
9999
0112
0114
9.55
9.55.3
Code
0596
0638
9999
0112
0114
9.55
9.55.4
Code
Providing and fixing ISI marked M.S. pressed butt hinges brigh
necessary screws etc. complete :
100x58x1.90 mm
Description
Details of cost for ten
MaterialsButt hinges 100x58x1.9 mm
Iron screws 40 mm
Carriage of materials
LabourCarpenter 2nd class
Beldar
TOTAL
Add for water charge @ 1%
TOTAL
Add for contractors profit and overheads @
15%
Cost of 10 hinges
Cost of 1 butt hinge
Say
Providing and fixing ISI marked M.S. pressed butt hinges brigh
necessary screws etc. complete :
75x47x1.70 mm
Description
Details of cost for ten
MaterialsButt hinges 175x47x1.7 mm
Iron screws 30 mm
Carriage of materials
LabourCarpenter 2nd class
Beldar
TOTAL
Add for water charge @ 1 %
TOTAL
Add for contractors profit and overheads @
15%
Cost of 10 hinges
Cost of 1 butt hinge
Say
Providing and fixing ISI marked M.S. pressed butt hinges brigh
necessary screws etc. complete :
50x37x1.50 mm
Description
Details of cost for ten
Materials-
0597
0640
9999
0112
356
Unit
Quantity
Rate
Amount
10 Nos
100 Nos
L.S
10.00
80.00
2.73
54.00
30.00
1.00
54.00
24.00
2.73
Day
Day
0.14
0.09
141.60
135.25
19.82
12.17
112.72
1.13
113.85
17.08
130.93
13.09
13.10
Unit
Quantity
Rate
Amount
10 Nos
100 Nos
L.S.
10.00
60.00
1.82
34.00
24.00
1.00
34.00
14.40
1.82
Day
Day
0.14
0.09
141.60
135.25
19.82
12.17
82.21
0.82
83.03
12.45
95.48
9.55
9.55
Unit
Quantity
Rate
Amount
10 Nos
100 Nos
L.S.
10.00
40.00
0.91
28.00
15.00
1.00
28.00
6.00
0.91
Day
0.08
141.60
11.33
46.24
Code
Description
Add for water charge @ 1%
TOTAL
Add for contractors profit and overheads @
15%
Cost of 10 hinges
Cost of 1 butt hinge
Say
9.56 Providing and fixing IS : 1341 marked M.S. heavy weight butt hin
screws etc. complete :
9.56.1 125x90x4.00 mm
Description
Details of cost for ten
MaterialsM.S. heavy weight but hinges 125x90x4.0mm
8222
IS: 1341 marked.
Iron screws 50 mm
0635
Carriage of materials
9999
LabourCarpenter 2nd class
0112
Beldar
0114
TOTAL
Add for water charge @ 1 %
TOTAL
Add for contractors profit and overheads @
15%
Cost of 10 hinges
Cost of 1 butt hinge
Say
Code
9.56 Providing and fixing IS : 1341 marked M.S. heavy weight butt hin
screws etc. complete :
9.56.2 100x75x3.50 mm
Description
Details of cost for ten
MaterialsM.S. heavy weight butt hinges 100x75x3.5
8223
mm IS: 1341 marked
Iron screws 40 mm
0637
Carriage of materials
9999
LabourCarpenter 2nd class
0112
Beldar
0114
TOTAL
Add for water charge @ 1%
TOTAL
Add for contractors profit and overheads @
15%
Cost of 10 hinges
Cost of 1 butt hinge
Say
Code
357
Unit
Quantity
Rate
Amount
0.46
46.70
7.00
53.70
5.37
5.35
Unit
Quantity
Rate
Amount
10 Nos
10.00
256.00
256.00
100 Nos
L.S.
80.00
2.73
40.00
1.00
32.00
2.73
Day
Day
0.14
0.09
141.60
135.25
19.82
12.17
322.72
3.23
325.95
48.89
374.84
37.48
37.50
Unit
Quantity
Rate
Amount
10 Nos.
10.00
133.00
133.00
100 Nos
L.S.
80.00
2.73
30.00
1.00
24.00
2.73
Day
Day
0.14
0.09
141.60
135.25
19.82
12.17
191.72
1.92
193.64
29.05
222.69
22.27
22.25
9.56
9.56.3
Code
8224
0638
9999
0112
0114
9.56
9.56.4
Code
8225
0640
9999
0112
9.57
9.57.1
Code
0642
0682
9999
0112
Providing and fixing IS : 1341 marked M.S. heavy weight butt hin
screws etc. complete :
75x60x3.10 mm
Description
Details of cost for ten
MaterialsM.S. heavy weight butt hinges 75x60x3.1 mm
IS: 1341 marked
Iron screws 30 mm
Carriage of materials
LabourCarpenter 2nd class
Beldar
TOTAL
Add for water charge @ 1 %
TOTAL
Add for contractors profit and overheads @
15%
Cost of 10 hinges
Cost of 1 butt hinge
Say
Providing and fixing IS : 1341 marked M.S. heavy weight butt hin
screws etc. complete :
50x40x2.50 mm
Description
Details of cost for ten
MaterialsM.S. heavy weight butt hinges 50x40x2.5 mm
IS: 1341 marked
Iron screws 20 mm
Carriage of materials
LabourCarpenter 2nd class
TOTAL
Add for water charge @ 1 %
TOTAL
Add for contractors profit and overheads @
15%
Cost of 10 hinges
Cost of 1 butt hinge
Say
Providing and fixing ISI marked oxidised M.S. pressed butt hinge
screws etc. complete.
125x65x2.12 mm
Description
Details of cost for 10 nos.
MaterialsM.S. butt hinges (oxidised) 125x65x2.12 mm
Iron screws (oxidised) 50 mm
Carriage of materials
LabourCarpenter II class
358
Unit
Quantity
Rate
Amount
10 Nos
10.00
67.00
67.00
100 Nos
L.S.
60.00
1.82
24.00
1.00
14.40
1.82
Day
Day
0.14
0.09
141.60
135.25
19.82
12.17
115.21
1.15
116.36
17.45
133.81
13.38
13.40
Unit
Quantity
Rate
Amount
10 Nos
10.00
52.00
52.00
100 Nos
L.S.
40.00
0.91
15.00
1.00
6.00
0.91
Day
0.08
141.60
11.33
70.24
0.70
70.94
10.64
81.58
8.16
8.15
Unit
Quantity
Rate
Amount
10 Nos
100 Nos
L.S.
10.00
80.00
3.64
92.00
40.00
1.00
92.00
32.00
3.64
Day
0.14
141.60
19.82
Code
0114
Description
Beldar
TOTAL
Add for water charge @ 1 %
TOTAL
Add for contractors profit and overheads @
15%
Cost of 10 nos.
Cost of 1 no
Say
9.57 Providing and fixing ISI marked oxidised M.S. pressed butt h
screws etc. complete.
9.57.2 100x58x1.90 mm
Code
0643
0683
9999
0112
0114
Description
Details of cost for 10 nos.
MaterialsM.S. butt hinges (oxidised) 100x58x1.9 mm
Iron screws (oxidised) 40 mm
Carriage of materials
LabourCarpenter II class
Beldar
TOTAL
Add for water charge @ 1 %
TOTAL
Add for contractors profit and overheads @
15%
Cost of 10 nos.
Cost of 1 no
Say
9.57 Providing and fixing ISI marked oxidised M.S. pressed butt h
screws etc. complete.
9.57.3 75x47x1.70 mm
Code
0644
0684
9999
0112
0114
Description
Details of cost for 10 nos.
MaterialsM.S. butt hinges (oxidised) 75x47x1.7 mm
Iron screws (oxidised) 30 mm
Carriage of materials
LabourCarpenter II class
Beldar
TOTAL
Add for water charge @ 1 %
TOTAL
Add for contractors profit and overheads @
15%
Cost of 10 nos.
Cost of 1 no
Say
359
Unit
Quantity
Rate
Amount
Day
0.09
135.25
12.17
159.63
1.60
161.23
24.18
185.41
18.54
18.55
Unit
Quantity
Rate
Amount
10 Nos
100 Nos
L.S.
10.00
80.00
2.73
53.00
35.00
1.00
53.00
28.00
2.73
Day
Day
0.14
0.09
141.60
135.25
19.82
12.17
115.72
1.16
116.88
17.53
134.41
13.44
13.45
Unit
Quantity
Rate
Amount
10 Nos
100 Nos
L.S.
10.00
60.00
1.82
32.00
24.00
1.00
32.00
14.40
1.82
Day
Day
0.14
0.09
141.60
135.25
19.82
12.17
80.21
0.80
81.01
12.15
93.16
9.32
9.30
9.57
9.57.4
Code
0645
0686
9999
0112
9.58
9.58.1
Code
0646
0683
9999
0112
0114
9.58
9.58.2
Code
0647
0683
9999
Providing and fixing ISI marked oxidised M.S. pressed butt hing
screws etc. complete.
50x37x1.50 mm
Description
Details of cost for 10 nos.
MaterialsM.S. butt hinges (oxidised) 50x37x1.5 mm
Iron screws (oxidised) 20 mm
Carriage of materials
LabourCarpenter II class
TOTAL
Add for water charge @ 1 %
TOTAL
Add for contractors profit and overheads @
15%
Cost of 10 nos.
Cost of 1 no
Say
360
Unit
Quantity
Rate
Amount
10 Nos
100 Nos
L.S
10.00
40.00
0.91
27.00
15.00
1.00
27.00
6.00
0.91
Day
0.08
141.60
11.33
45.24
0.45
45.69
6.85
52.54
5.25
5.25
Unit
Quantity
Rate
Amount
10 Nos
10.00
255.00
255.00
100 Nos
L.S.
80.00
2.73
35.00
1.00
28.00
2.73
Day
Day
0.14
0.14
141.60
135.25
19.82
18.94
324.49
3.24
327.73
49.16
376.89
37.69
37.70
Unit
Quantity
Rate
Amount
10 Nos
10.00
205.00
205.00
100 Nos
L.S.
80.00
2.73
35.00
1.00
28.00
2.73
Code
0112
0114
Description
Carpenter II class
Beldar
TOTAL
Add for water charge @ 1 %
TOTAL
Add for contractors profit and overheads @
15%
Cost of 10 nos.
Cost of 1 no
Say
9.58 Providing and fixing ISI marked oxidised M.S. pressed Parliamen
necessary screws etc. complete :
9.58.3 100x125x27x2.80 mm
Description
Details of cost for 10 nos.
MaterialsM.S. parliamentary hinges (oxidised)
0648
100x125x27x2.8 mm
Iron screws (oxidised) 40 mm
0683
Carriage of materials
9999
LabourCarpenter II class
0112
Beldar
0114
TOTAL
Add for water charge @ 1 %
TOTAL
Add for contractors profit and overheads @
15%
Cost of 10 nos.
Cost of 1 no
Say
Code
9.58 Providing and fixing ISI marked oxidised M.S. pressed Parliamen
necessary screws etc. complete :
9.58.4 75x100x20x2.24 mm
Description
Details of cost for 10 nos.
MaterialsM.S. parliamentary hinges (oxidised)
0649
75x100x20x2.24 mm
Iron screws (oxidised) 30 mm
0684
Carriage of materials
9999
LabourCarpenter 2nd class
0112
Beldar
0114
TOTAL
Add for water charge @ 1 %
TOTAL
Add for contractors profit and overheads @
15%
Cost of 10 nos.
Cost of 1 no
Say
Code
361
Unit
Quantity
Rate
Amount
Day
Day
0.14
0.14
141.60
135.25
19.82
18.94
274.49
2.74
277.23
41.58
318.81
31.88
31.90
Unit
Quantity
Rate
Amount
10 Nos
10.00
165.00
165.00
100 Nos
L.S.
80.00
2.73
35.00
1.00
28.00
2.73
Day
Day
0.14
0.14
141.60
135.25
19.82
18.94
234.49
2.34
236.83
35.52
272.35
27.24
27.25
Unit
Quantity
Rate
Amount
10 Nos
10.00
122.00
122.00
100 Nos
L.S.
60.00
2.73
24.00
1.00
14.40
2.73
Day
Day
0.14
0.14
141.60
135.25
19.82
18.94
177.89
1.78
179.67
26.95
206.62
20.66
20.65
9.59
9.59.1
Code
0650
0682
9999
0112
0114
9.59
9.59.2
Code
0651
0682
9999
0112
0114
9.59
9.59.3
Code
0652
0683
9999
Providing and fixing ISI marked oxidised M.S. single acting spri
necessary screws etc. complete :
150 mm
Description
Details of cost for 10 nos.
MaterialsM.S. single acting spring hinges (oxidised)
150 mm
Iron screws (oxidised) 50 mm
Carriage of materials
LabourCarpenter II class
Beldar
TOTAL
Add for water charge @ 1 %
TOTAL
Add for contractors profit and overheads @
15%
Cost of 10 nos.
Cost of 1 no
Say
Providing and fixing ISI marked oxidised M.S. single acting spri
necessary screws etc. complete :
125 mm
Description
Details of cost for 10 nos.
MaterialsM.S. single acting spring hinges (oxidised)
125 mm
Iron screws (oxidised) 50 mm
Carriage of materials
LabourCarpenter II class
Beldar
TOTAL
Add for water charge @ 1%
TOTAL
Add for contractors profit and overheads @
15%
Cost of 10 nos.
Cost of 1 no
Say
Providing and fixing ISI marked oxidised M.S. single acting spri
necessary screws etc. complete :
100 mm
Description
Details of cost for 10 nos.
MaterialsM.S. single acting spring hinges (oxidised)
100 mm
Iron screws (oxidised) 40 mm
Carriage of materials
Labour-
362
Unit
Quantity
Rate
Amount
each
10.00
71.00
710.00
100 Nos
L.S.
80. 00
2.73
40.00
1.00
32.00
2.73
Day
Day
0.40
0.20
141.60
135.25
56.64
27.05
828.42
8.28
836.70
125.50
962.20
96.22
96.20
Unit
Quantity
Rate
Amount
each
10.00
66.00
660.00
100 Nos
L.S.
80.00
2.73
40.00
1.00
32.00
2.73
Day
Day
0.40
0.20
141.60
135.25
56.64
27.05
778.42
7.78
786.20
117.93
904.13
90.41
90.40
Unit
Quantity
Rate
Amount
each
10.00
51.00
510.00
100 Nos
L.S.
80.00
2.73
35.00
1.00
28.00
2.73
Description
Code
Carpenter II class
Beldar
TOTAL
Add for water charge @ 1 %
TOTAL
Add for contractors profit and overheads @
15%
Cost of 10 nos.
Cost of 1 no
Say
0112
0114
9.60
9.60.1
Code
0653
0682
0112
0114
Description
Details of cost for 10 nos.
MaterialsM.S. double acting spring hinges (oxidised)
150 mm
Iron screws (oxidised) 50 mm
Carriage of materials
9999
LabourCarpenter II class
Beldar
TOTAL
Add for water charge @ 1%
TOTAL
Add for contractors profit and overheads @
15%
Cost of 10 nos.
Cost of 1 no
Say
9.60
9.60.2
Code
0654
0682
0112
0114
Description
Details of cost for 10 nos.
MaterialsM.S. double acting spring hinges (oxidised)
125 mm
Iron screws (oxidised) 50 mm
Carriage of materials
9999
LabourCarpenter II class
Beldar
TOTAL
Add for water charge @ 1 %
TOTAL
Add for contractors profit and overheads @
15%
Cost of 10 nos.
Cost of 1 no
Say
363
Unit
Quantity
Rate
Amount
Day
Day
0.40
0.20
141.60
135.25
56.64
27.05
624.42
6.24
630.66
94.60
725.26
72.53
72.55
Unit
Quantity
Rate
Amount
each
10.00
73.00
730.00
100 Nos
L.S.
80.00
2.73
40.00
1.00
32.00
2.73
Day
Day
0.40
0.20
141.60
135.25
56.64
27.05
848.42
8.48
856.90
128.54
985.44
98.54
98.55
Unit
Quantity
Rate
Amount
each
10.00
63.00
630.00
100 Nos
L.S.
80.00
2.73
40.00
1.00
32.00
2.73
Day
Day
0.40
0.20
141.60
135.25
56.64
27.05
748.42
7.48
755.90
113.38
869.28
86.93
86.95
Description
Details of cost for 10 nos.
MaterialsM.S. double acting spring hinges (oxidised)
0655
100 mm
Iron screws (oxidised) 40 mm
0683
Carriage of materials
9999
LabourCarpenter II class
0112
Beldar
0114
TOTAL
Add for water charge @ 1 %
TOTAL
Add for contractors profit and overheads @
15%
Cost of 10 nos.
Cost of 1 no
Say
Code
9.61 Providing M.S. Piano hinges ISI marked IS : 3818 finished with nic
fixing with necessary screws etc., complete.
9.61.1 Overall width 35 mm.
Description
Details of cost for 1 meter
MaterialsM.S. piano hinges (oxidised) 35 mm wide
0656
Iron screws (oxidised) 20 mm
0686
Carriage of materials
9999
LabourCarpenter II class
0112
Beldar
0114
TOTAL
Add for water charge @ 1 %
TOTAL
Add for contractors profit and overheads @
15%
Cost for 1 metre
Say
Code
9.61 Providing M.S. Piano hinges ISI marked IS : 3818 finished with nic
fixing with necessary screws etc., complete.
9.61.2 Overall width 50 mm.
Description
Details of cost for 1 meter
MaterialsM.S. piano hinges (oxidised) 50 mm wide
7485
Iron screws (oxidised) 20 mm
0686
Carriage of materials
9999
LabourCarpenter II class
0112
Beldar
0114
Code
364
Unit
Quantity
Rate
Amount
each
10.00
47.00
470.00
100 Nos
L.S.
80.00
2.73
35.00
1.00
28.00
2.73
Day
Day
0.40
0.20
141.60
135.25
56.64
27.05
584.42
5.84
590.26
88.54
678.80
67.88
67.90
Unit
Quantity
Rate
Amount
metre
100 Nos
L.S.
1.00
30.00
1.82
24.00
15.00
1.00
24.00
4.50
1.82
Day
Day
0.14
0.09
141.60
135.25
19.82
12.17
62.31
0.62
62.93
9.44
72.37
72.35
Unit
Quantity
Rate
Amount
metre
100 Nos
L.S.
1.00
30.00
1.82
29.00
15.00
1.00
29.00
4.50
1.82
Day
Day
0.14
0.09
141.60
135.25
19.82
12.17
Code
Description
TOTAL
Add for water charge @ 1 %
TOTAL
Add for contractors profit and overheads @
15%
Cost for 1 metre
Say
9.61
9.61.3
Code
7486
0686
9999
0112
0114
9.62
9.62.1
Code
0660
7040
0641
9999
0112
365
Unit
Quantity
Rate
Amount
67.31
0.67
67.98
10.20
78.18
78.20
Unit
Quantity
Rate
Amount
metre
100 Nos
L.S.
1.00
30.00
1.82
34.00
15.00
1.00
34.00
4.50
1.82
Day
Day
0.14
0.09
141.60
135.25
19.82
12.17
72.31
0.72
73.03
10.95
83.98
84.00
nuts and
Unit
Quantity
Rate
Amount
each
100 Nos
each
L.S.
10.00
120.00
40.00
6.37
45.00
28.00
4.00
1.00
450.00
33.60
160.00
6.37
Day
0.25
141.60
35.40
685.37
6.85
692.22
103.83
796.05
79.61
79.60
9.62
9.62.2
Code
0661
7040
0641
9999
0112
9.63
9.63.1
Code
0664
0684
9999
0112
9.63
9.63.2
Code
0665
0684
9999
0112
Providing and fixing ISI marked oxidised M.S. sliding door bolts
screws etc. complete :
250x16 mm
Description
Details of cost for 10 nos.
MaterialsM.S. sliding door bolts (oxidised) 250x16 mm
Iron screws (oxidised) 35 mm
Bolts and nuts 50x6 mm
Carriage of materials & sundries
LabourCarpenter II class
TOTAL
Add for water charge @ 1 %
TOTAL
Add for contractors profit and overheads @
15%
Cost of 10 nos.
Cost of 1 no.
Say
Providing and fixing ISI marked oxidised M.S. tower bolt black fi
with necessary screws etc. complete :
250x10 mm
Description
Details of cost for 10 nos.
MaterialsM.S. tower bolts (oxidised) 250x10 mm
Iron screws (oxidised) 30 mm
Carriage of material
LabourCarpenter II class
TOTAL
Add for water charge @ 1 %
TOTAL
Add for contractors profit and overheads
15%
Cost of 10 nos.
Cost of 1 no.
Say
Providing and fixing ISI marked oxidised M.S. tower bolt black fi
with necessary screws etc. complete :
200x10 mm
Description
Details of cost for 10 nos.
MaterialsM.S. tower bolts (oxidised) 200x10 mm
Iron screws (oxidised) 30 mm
Carriage of material
LabourCarpenter II class
TOTAL
Add for water charge @ 1%
366
Unit
Quantity
Rate
Amount
each
100 Nos
each
L.S.
10.00
100.00
40.00
6.37
37.00
28.00
4.00
1.00
370.00
28.00
160.00
6.37
Day
0.25
141.60
35.40
599.77
6.00
605.77
90.87
696.64
69.66
69.65
Unit
Quantity
Rate
Amount
each
100 Nos
L.S.
10.00
100.00
3.64
25.00
24.00
1.00
250.00
24.00
3.64
Day
0.10
141.60
14.16
291.80
2.92
294.72
44.21
338.93
33.89
33.90
Unit
Quantity
Rate
Amount
each
100 Nos
L.S.
10.00
80.00
2.73
21.00
24.00
1.00
210.00
19.20
2.73
Day
0.10
141.60
14.16
246.09
2.46
Code
Description
TOTAL
Add for contractors profit and overheads @
15%
Cost of 10 nos.
Cost of 1 no.
Say
9.63 Providing and fixing ISI marked oxidised M.S. tower bolt black fi
with necessary screws etc. complete :
150x10 mm
9.63.3
Code
0666
0684
0112
Description
Details of cost for 10 nos.
MaterialsM.S. tower bolts (oxidised) 150x10 mm
Iron screws (oxidised) 30 mm
Carriage of material
9999
LabourCarpenter II class
TOTAL
Add for water charge @ 1%
TOTAL
Add for contractors profit and overheads @
15%
Cost of 10 nos.
Cost of 1 no.
Say
9.63 Providing and fixing ISI marked oxidised M.S. tower bolt black fi
with necessary screws etc. complete :
100x10 mm
9.63.4
Code
0667
0684
0112
Description
Details of cost for 10 nos.
Materials-
367
Unit
Quantity
Rate
Amount
248.55
37.28
285.83
28.58
28.60
Unit
Quantity
Rate
Amount
each
100 Nos
L.S.
10.00
60.00
2.73
17.00
24.00
1.00
170.00
14.40
2.73
Day
0.10
141.60
14.16
201.29
2.01
203.30
30.50
233.80
23.38
23.40
Unit
Quantity
Rate
Amount
each
100 Nos
L.S.
10.00
60.00
2.73
12.00
24.00
1.00
120.00
14.40
2.73
Day
0.08
141.60
11.33
148.46
1.48
149.94
22.49
172.43
17.24
17.25
9.64
Providing and fixing ISI marked 85x42mm oxidised M.S. pull bol
to IS : 7534 with necessary screws bolts, nut and washers etc. c
Code
Description
Details of cost for 10 nos.
Materials-
2449
9999
0112
Carpenter II class
TOTAL
Add for water charge @ 1 %
TOTAL
Add for contractors profit and overheads @
15%
Cost of 10 nos.
Cost of 1 no.
Say
9.65
9.65.1
Code
0662
0685
9999
0112
9.65
9.65.2
Providing and fixing ISI marked oxidised M.S. door latches confo
with screws etc. complete :
300x20x6 mm
Description
Details of cost for 10 nos.
MaterialsM.S. door latches (oxidised) 300x20x6 mm
Iron screws (oxidised) 25 mm
Carriage of materials
LabourCarpenter II class
TOTAL
Add for water charge @ 1 %
TOTAL
Add for contractors profit and overheads @
15%
Cost of 10 nos.
Cost of 1 no.
Say
Providing and fixing ISI marked oxidised M.S. door latches confo
with screws etc. complete :
250x20x6 mm
Code
Description
0663
0685
9999
0112
368
Quantity
Rate
Amount
each
10.00
27.00
270.00
L.S.
6.37
1.00
6.37
Day
0.25
141.60
35.40
311.77
3.12
314.89
47.23
362.12
36.21
36.20
Unit
Quantity
Rate
Amount
each
100 Nos
L.S.
10.00
90.00
3.64
25.00
16.00
1.00
250.00
14.40
3.64
Day
0.12
141.60
16.99
285.03
2.85
287.88
43.18
331.06
33.11
33.10
Unit
Quantity
Rate
Amount
each
100 Nos
L.S.
10.00
90.00
3.64
25.00
16.00
1.00
250.00
14.40
3.64
Day
0.12
141.60
16.99
285.03
Description
Add for water charge @ 1 %
TOTAL
Add for contractors profit and overheads @
15%
Cost of 10 nos.
Cost of 1 no.
Say
Code
9.66 Providing and fixing ISI marked oxidised M.S. handles conform
necessary screws etc. complete :
125 mm
9.66.1
Code
0668
0685
0112
Description
Details of cost for 10 nos.
MaterialsM.S. handle (oxidised) 125 mm
Iron screws (oxidised) 25 mm
Carriage of materials
9999
LabourCarpenter II class
TOTAL
Add for water charge @ 1 %
TOTAL
Add for contractors profit and overheads @
15%
Cost of 10 nos.
Cost of 1 no.
Say
9.66 Providing and fixing ISI marked oxidised M.S. handles conform
necessary screws etc. complete:
9.66.2
Code
0669
0685
0112
100 mm
Description
Details of cost for 10 nos.
MaterialsM.S. handle (oxidised) 100 mm
Iron screws (oxidised) 25 mm
Carriage of materials
9999
LabourCarpenter II class
TOTAL
Add for water charge @ 1 %
TOTAL
Add for contractors profit and overheads @
15%
Cost of 10 nos.
Cost of 1 no.
Say
369
Unit
Quantity
Rate
Amount
2.85
287.88
43.18
331.06
33.11
33.10
Unit
Quantity
Rate
Amount
each
100 Nos
L.S.
10.00
40.00
2.73
7.00
16.00
1.00
70.00
6.40
2.73
Day
0.06
141.60
8.50
87.63
0.88
88.51
13.28
101.79
10.18
10.20
Unit
Quantity
Rate
Amount
each
100 Nos
L.S.
10.00
40.00
1.82
5.00
16.00
1.00
50.00
6.40
1.82
Day
0.06
141.60
8.50
66.72
0.67
67.39
10.11
77.50
7.75
7.75
9.66
9.66.3
Code
0670
0685
9999
0112
9.67
9.67.1
Providing and fixing oxidised M.S. hasp and staple (safety type) confo
0112
Description
Details of cost for 10 nos.
MaterialsM.S. hasp and staple (safety type) (oxidised)
150 mm
Iron screws (oxidised) 25 mm
Carriage of materials
LabourCarpenter II class
TOTAL
Add for water charge @ 1 %
TOTAL
Add for contractors profit and overheads @
15%
Cost of 10 nos.
Cost of 1 no.
Say
9.67
Providing and fixing oxidised M.S. hasp and staple (safety type) confo
Code
0679
0685
9999
9.67.2
Code
370
Unit
Quantity
Rate
Amount
each
100 Nos
L.S.
10.00
40.00
1.82
3.00
16.00
1.00
30.00
6.40
1.82
Day
0.06
141.60
8.50
46.72
0.47
47.19
7.08
54.27
5.43
5.45
363 with
Unit
Quantity
Rate
Amount
10 Nos
10.00
79.00
79.00
100 Nos
L.S.
80.00
1.82
16.00
1.00
12.80
1.82
Day
0.08
141.60
11.33
104.95
1.05
106.00
15.90
121.90
12.19
12.20
Unit
Quantity
Rate
Amount
Description
M.S. hasp and staple (safety type) (oxidised)
115 mm
Iron screws (oxidised) 25 mm
0685
Carriage of materials
9999
LabourCarpenter II class
0112
TOTAL
Add for water charge @ 1 %
TOTAL
Add for contractors profit and overheads @
15%
Cost of 10 nos.
Cost of 1 no.
Say
Code
0680
9.67 Providing and fixing oxidised M.S. hasp and staple (safety type) confor
necessary screws etc. complete :
9.67.3 90 mm
Description
Details of cost for 10 nos.
MaterialsM.S. hasp and staple (safety type) (oxidised)
0681
90 mm
Iron screws (oxidised) 25 mm
0685
Carriage of materials
9999
LabourCarpenter II class
0112
TOTAL
Add for water charge @ 1%
TOTAL
Add for contractors profit and overheads @
15%
Cost of 10 nos.
Cost of 1 no.
Say
Code
9.68 Providing and fixing oxidised M.S. casement stays (straight peg t
screws etc. complete.
9.68.1 300 mm weighing not less than 200 gms.
Description
Details of cost for 10 nos.
MaterialsOxidised M.S. casement stay 300 mm
7063
Screws 30 mm
0684
Carriage of materials
9999
LabourCode
100 Nos
L.S.
371
Unit
10 Nos
Quantity
10.00
Rate
70.00
Amount
70.00
100 Nos
L.S.
70.00
1.82
16.00
1.00
11.20
1.82
Day
0.08
141.60
11.33
94.35
0.94
95.29
14.29
109.58
10.96
10.95
363 with
Unit
Quantity
Rate
Amount
10 Nos
10.00
52.00
52.00
100 Nos
L.S.
70.00
1.82
16.00
1.00
11.20
1.82
Day
0.08
141.60
11.33
76.35
0.76
77.11
11.57
88.68
8.87
8.85
Unit
Quantity
Rate
Amount
each
10.00
40.00
0.91
14.00
24.00
1.00
140.00
9.60
0.91
Code
0112
Description
Carpenter II class
TOTAL
Add for water charge @ 1 %
TOTAL
Add for contractors profit and overheads @
15%
Cost of 10 nos.
Cost of 1 no.
Say
Code
7064
0685
9999
0112
Description
Code
7065
0685
9999
0112
Description
Details of cost for 10 nos.
MaterialsOxidised M.S. casement stay 200 mm
Screws 25 mm
Carriage of materials
LabourCarpenter II class
TOTAL
Add for water charge @ 1 %
TOTAL
372
Unit
Quantity
Rate
Amount
Day
0.10
141.60
14.16
164.67
1.65
166.32
24.95
191.27
19.13
19.15
Unit
Quantity
Rate
Amount
each
100 Nos
L.S.
10.00
40.00
0.91
12.00
16.00
1.00
120.00
6.40
0.91
Day
0.10
141.60
14.16
141.47
1.41
142.88
21.43
164.31
16.43
16.45
Unit
Quantity
Rate
Amount
each
100 Nos
L.S.
10.00
40.00
0.91
11.00
16.00
1.00
110.00
6.40
0.91
Day
0.10
141.60
14.16
131.47
1.31
132.78
Code
Description
Add for contractors profit and overheads @
15%
Cost of 10 nos.
Cost of 1 no.
Say
9.69 Providing and fixing oxidised M.S. Safety chain with necessary fi
(Weighing not less than 450 gms.)
Description
Details of cost for 10 nos.
MaterialsOxidised M.S. safety chain
7184
Iron screws 25 mm
0685
Carriage of materials
9999
LabourCarpenter II class
0112
TOTAL
Add for water charge @ 1 %
TOTAL
Add for contractors profit and overheads @
15%
Cost of 10 nos.
Cost of 1 no.
Say
Code
9.70
9.70.1
Code
8215
373
Unit
Quantity
Rate
Amount
19.92
152.70
15.27
15.25
Quantity
Rate
Amount
each
100 Nos
L.S.
10.00
60.00
0.91
43.00
16.00
1.00
430.00
9.60
0.91
Day
0.10
141.60
14.16
454.67
4.55
459.22
68.88
528.10
52.81
52.80
stainless
Unit
Quantity
Rate
Amount
10 Nos
100 Nos
L.S.
10.00
80.00
2.73
200.00
213.00
1.00
200.00
170.40
2.73
Day
Day
0.14
0.09
141.00
135.25
19.82
12.17
405.12
4.05
409.17
61.38
470.55
47.06
47.05
9.70 :
9.70.2 :
Code
0112
0114
100X58X1.90 mm
Description
Details of cost for 10 Nos
MaterialsS.S. butt hinges 100x58x1.9 mm
8216
Stainless steel screws 40 mm
8211
Carriage of materials
9999
LabourCarpenter 2nd class
Beldar
TOTAL
Add for water charge @ 1 %
TOTAL
Add for contractors profit and overheads @
15%
Cost of 10 hinges
Cost of 1 butt hinge
Say
9.70
9.70.3
Code
Description
Details of cost for 10 Nos
MaterialsS.S. butt hinges 75x47x1.8 mm
8217
Stainless steel screws 30 mm
8212
Carriage of materials
9999
Labour-
0112
0114
Code
Description
Details of cost for 10 Nos
MaterialsS.S. butt hinges 50x37x1.5 mm
8218
Stainless steel screws 20 mm
8214
Carriage of materials
9999
Labour-
374
Unit
Quantity
Rate
Amount
10 Nos
100 Nos
L.S.
10.00
80.00
2.73
143.00
157.00
1.00
143.00
125.60
2.73
Day
Day
0.14
0.09
141.60
135.25
19.82
12.17
303.32
3.03
306.35
45.95
352.30
35.23
35.25
Unit
Quantity
Rate
Amount
10 Nos
100 Nos
L.S.
10.00
60.00
1.82
112.00
98.00
1.00
112.00
58.80
1.82
Day
Day
0.14
0.09
141.60
135.25
19.82
12.17
204.61
2.05
206.66
31.00
237.66
23.77
23.75
Unit
Quantity
Rate
Amount
10 Nos
100 Nos
L.S.
10.00
40.00
0.91
90.00
63.00
1.00
90.00
25.20
0.91
41.60
Code
0112
Description
Carpenter 2nd class
TOTAL
Add for water charge @ 1%
TOTAL
Add for contractors profit and overheads @
15%
Cost of 10 hinges
Cost of 1 butt hinge
Say
Description
Details of cost for 10 Nos
MaterialsS.S. butt hinges 125x64x2.5 mm
8219
Stainless steel screws 50 mm
8210
Carriage of materials
9999
LabourCarpenter 2nd class
0112
Beldar
0114
TOTAL
Add for water charge @ 1%
TOTAL
Add for contractors profit and overheads @
15%
Cost of 10 hinges
Cost of 1 butt hinge
Say
Code
Description
Details of cost for 10 Nos
Material
S.S. butt hinges 100x60x2.5 mm
8220
Stainless steel screws 40 mm
8211
Carriage of materials
9999
LabourCarpenter 2nd class
0112
Beldar
0114
TOTAL
Add for water charge @ 1 %
TOTAL
Add for contractors profit and overheads @
15%
Cost of 10 hinges
Cost of 1 butt hinge
Say
Code
375
Unit
Day
Quantity
0.08
Rate
141.60
Amount
11.33
127.44
1.27
128.71
19.31
148.02
14.80
14.80
14.80
Unit
Quantity
Rate
Amount
10 Nos
100 Nos
L.S.
10.00
80.00
2.73
261.00
213.00
1.00
261.00
170.40
2.73
Day
Day
0.14
0.09
141.60
135.25
19.82
12.17
466.12
4.66
470.78
70.62
541.40
54.14
54.15
Unit
Quantity
Rate
Amount
10 Nos
100 Nos
L.S.
10.00
80.00
2.73
185.00
157.00
1.00
185.00
125.60
2.73
Day
Day
0.14
0.09
141.60
135.25
19.82
12.17
345.32
3.45
348.77
52.32
401.09
40.11
40.10
9.71:
9.71.3 : 75x50x2.50 mm
Description
Details of cost for 10 Nos
MaterialsS.S. butt hinges 75x50x2.5 mm
8221
Stainless steel screws 30 mm
8212
Carriage of materials
9999
LabourCarpenter 2nd class
0112
Beldar
0114
TOTAL
Add for water charge @ 1%
TOTAL
Add for contractors profit and overheads @
15%
Cost of 10 hinges
Cost of 1 butt hinge
Say
Code
9.72 :
9.72.1:
Providing and fixing bright finished brass butt hinges with necess
complete :
125x85x5.5 mm (heavy type)
Description
Code
Details of cost for 10 nos.
MaterialsBrass butt hinges 125x85x5.5 mm
0382
Brass screws 50 mm
0449
Carriage of material
9999
LabourCarpenter 1 st class
0111
Beldar
0114
TOTAL
Add for water charge @ 1 %
TOTAL
Add for contractors profit and overheads @
15%
Cost for 10 nos.
Cost of 1 no.
Say
9.72 :
Providing and fixing bright finished brass butt hinges with nece
complete :
9.72.2 : 125x70x4 mm (ordinary type)
Description
Details of cost for 10 nos.
MaterialsBrass butt hinges 125x70x4 mm
0378
Brass screws 50 mm
0449
Carriage of material
9999
LabourCode
376
Unit
Quantity
Rate
Amount
10 Nos
100 Nos
L.S.
10.00
60.00
1.82
155.00
98.00
1.00
155.00
58.80
1.82
Day
Day
0.14
0.09
141.60
135.25
19.82
12.17
247.61
2.48
250.09
37.51
287.60
28.76
28.75
Unit
Quantity
Rate
Amount
10 Nos
100 Nos
L.S.
10.00
100.00
3.64
1 500.00
107.00
1.00
1 500.00
107.00
3.64
Day
Day
0.14
0.10
151.50
135.25
21.21
13.52
1 645.37
16.45
1 661.82
249.27
1 911.09
191.11
191.10
Unit
Quantity
Rate
Amount
10 Nos
100 Nos
L.S.
10.00
100.00
3.64
450.00
107.00
1.00
450.00
107.00
3.64
Code
0111
0114
Description
Carpenter 1 st class
Beldar
TOTAL
Add for water charge @ 1%
TOTAL
Add for contractors profit and overheads @
15%
Cost for 10 nos.
Cost of 1 no.
Say
9.72 : Providing and fixing bright finished brass butt hinges with necess
complete :
9.72.3 : 100x85x5.5 mm (heavy type)
Code
Description
9.72 : Providing and fixing bright finished brass butt hinges with necess
complete :
9.72.4 : 100x70x4 mm (ordinary type)
Description
Details of cost for 10 nos.
MaterialsBrass butt hinges 100x70x4 mm
0379
Brass screws 40 mm
0450
Carriage of material
9999
LabourCarpenter 1 st class
0111
Beldar
0114
TOTAL
Add for water charge @ 1%
TOTAL
Add for contractors profit and overheads @
15%
Cost for 10 nos.
Cost of 1 no.
Say
Code
377
Unit
Day
Day
Quantity
0.14
0.10
Rate
151.50
135.25
Amount
21.21
13.52
595.37
5.95
601.32
90.20
691.52
69.15
69.15
Unit
Quantity
Rate
Amount
10 Nos
100 Nos
L.S.
10.00
80.00
2.73
1300.00
96.00
1.00
1300.00
76.80
2.73
Day
Day
0.14
0.10
151.50
135.25
21.21
13.52
1414.26
14.14
1428.40
214.26
1642.66
164.27
164.25
Unit
Quantity
Rate
Amount
10 Nos
100 Nos
L.S.
10.00
80.00
2.73
300.00
96.00
1.00
300.00
76.80
2.73
Day
Day
0.14
0.10
151.50
135.25
21.21
13.52
414.26
4.14
418.40
62.76
481.16
48.12
48.10
9.72 : Providing and fixing bright finished brass butt hinges with necessa
complete :
9.72.5 : 75x65x4 mm (heavy type)
Description
Details of cost for 10 nos.
MaterialsBrass butt hinges 75x65x4 mm
0384
Brass screws 30 mm
0451
Carriage of material
9999
LabourCarpenter 1st class
0111
Beldar
0114
TOTAL
Add for water charge @ 1%
TOTAL
Add for contractors profit and overheads @
15%
Cost for 10 nos.
Cost of 1 no.
Say
Code
9.72 : Providing and fixing bright finished brass butthinges with necessa
complete :
9.72.6 : 75x40x2.5 mm (ordinary type)
Code
0380
0451
9999
0111
0114
Description
Details of cost for 10 nos.
MaterialsBrass butt hinges 75x40x2.5 mm
Brass screws 30 mm
Carriage of material
Labour-
9.72 :
Providing and fixing bright finished brass butt hinges with neces
complete :
9.72.7 : 50x40x2.5 mm (ordinary type)
Description
Details of cost for 10 nos.
MaterialsBrass butt hinges 50x40x2.5 mm
0381
Brass screws 20 mm
0453
Carriage of material
9999
LabourCode
378
Unit
Quantity
Rate
Amount
10 Nos
100 Nos
L.S.
10.00
60.00
2.73
450.00
86.00
1.00
450.00
51.60
2.73
Day
Day
0.14
0.10
151.50
135.25
21.21
13.52
539.06
5.39
544.45
81.67
626.12
62.61
62.60
Unit
Quantity
Rate
Amount
10 Nos
100 Nos
L.S.
10.00
60.00
2.73
160.00
86.00
1.00
160.00
51.60
2.73
Day
Day
0.14
0.10
151.50
135.25
21.21
13.52
249.06
2.49
251.55
37.73
289.28
28.93
28.95
Unit
Quantity
Rate
Amount
10 Nos
100 Nos
L.S.
10.00
40.00
1.82
90.00
53.00
1.00
90.00
21.20
1.82
Code
0111
Description
Carpenter 1st class
TOTAL
Add for water charge @ 1 %
TOTAL
Add for contractors profit and overheads @
15%
Cost for 10 nos.
Cost of 1 no.
Say
9.73 : Providing and fixing bright finished brass parliamentary hinges wit
screws etc. complete :
9.73.1 : 150x125x27x5 mm
Code
0385
0450
9999
0111
0114
Description
9.73 : Providing and fixing bright finished brass parliamentary hinges wit
screws etc. complete :
9.73.2 : 125x125x27x5 mm
Code
0386
0450
9999
0111
0114
Description
Details of cost for 10 nos.
MaterialsParliamentary hinges 125x125x27x5 mm
Brass screws 40 mm
Carriage of materials
LabourCarpenter 1 st class
Beldar
TOTAL
Add for water charge @ 1%
TOTAL
Add for contractors profit and overheads @
15%
Cost of 10 hinges
Cost of 1 hinge
Say
379
Unit
Day
Quantity
0.08
Rate
151.50
Amount
12.12
125.14
1.25
126.39
18.96
145.35
14.54
14.55
Unit
Quantity
Rate
Amount
10 Nos
100 Nos
L.S.
10.00
80.00
2.73
1650.00
96.00
1.00
1650.00
76.80
2.73
Day
Day
0.14
0.14
151.50
135.25
21.21
18.94
1769.68
17.70
1787.38
268.11
2055.49
205.55
205.55
Unit
Quantity
Rate
Amount
10 Nos
100 Nos
L.S.
10.00
80.00
2.73
1450.00
96.00
1.00
1450.00
76.80
2.73
Day
Day
0.14
0.14
151.50
135.25
21.21
18.94
1569.68
15.70
1585.38
237.81
1823.19
182.32
182.30
Description
Details of cost for 10 nos.
Materials-
0387
0450
75x100x20x3.2 mm
Description
Code
Details of cost for 10 nos.
MaterialsParliamentary hinges 75x100x20x3.2 mm
0388
Brass screws 30 mm
0451
Carriage of materials
9999
LabourCarpenter 1 st class
0111
Beldar
0114
TOTAL
Add for water charge @ 1 %
TOTAL
Add for contractors profit and overheads @
15%
Cost of 10 hinges
Cost of 1 hinge
Say
9.74 : Providing and fixing bright finished brass towerbolts (barrel type)
screws etc. complete :
9.74.1 : 250x10 mm
Description
Details of cost for 10 nos.
MaterialsBrass barrel bolts 250x 10 mm
0400
Brass screws 30 mm
0451
Carriage of materials
9999
LabourCode
380
Unit
Quantity
Rate
Amount
10 Nos
100 Nos
L.S.
1.00
80.00
2.73
1175.00
96.00
1.00
1175.00
76.80
2.73
Day
Day
0.14
0.14
151.50
135.25
21.21
18.94
1294.68
12.95
1307.63
196.14
1503.77
150.38
150.40
Unit
Quantity
Rate
Amount
10 Nos
100 Nos
L.S.
10.00
60.00
2.73
888.00
86.00
1.00
888.00
51.60
2.73
Day
Day
0.14
0.14
151.50
135.25
21.21
18.94
982.48
9.82
992.30
148.84
1141.14
114.11
114.10
Unit
Quantity
Rate
Amount
each
100 Nos
L.S.
10.00
100.00
4.55
123.00
86.00
1.00
1230.00
86.00
4.55
Code
0111
Description
Carpenter 1st class
TOTAL
Add for water charge @ 1%
TOTAL
Add for contractors profit and overheads@
15%
Cost of 10 tower bolts
Cost of 1 tower bolt
Say
9.74 :
9.74 :
Providing and fixing bright finished brass tower bolts (barrel typ
screws etc. complete :
9.74.3 : 150x10 mm
Description
Details of cost for 10 nos.
MaterialsBrass barrel bolts 150x10 mm
0402
Brass screws 30 mm
0451
Carriage of materials
9999
LabourCarpenter 1 st class
0111
TOTAL
Add for water charge @ 1 %
TOTAL
Add for contractors profit and overheads @
15%
Cost of 10 tower bolts
Cost of 1 tower bolt
Say
Code
381
Unit
Day
Quantity
0.10
Rate
151.50
Amount
15.15
1335.70
13.36
1349.06
202.36
1551.42
155.14
155.15
Unit
Quantity
Rate
Amount
each
100 Nos
L.S.
10.00
80.00
2.73
100.00
86.00
1.00
1000.00
68.80
2.73
Day
0.10
151.50
15.15
1086.68
10.87
1097.55
164.63
1262.18
126.22
126.20
Unit
Quantity
Rate
Amount
each
100 Nos
L.S.
10.00
80.00
2.73
75.00
86.00
1.00
750.00
68.80
2.73
Day
0.10
151.50
15.15
836.68
8.37
845.05
126.76
971.81
97.18
97.20
9.74 :
Providing and fixing bright finished brass tower bolts (barrel type
screws etc. complete :
9.74.4: 100x10 mm
Code
Description
9.75 : Providing and fixing bright finished brass door latch with necessary
complete :
9.75.1 : 300x16x5 mm
Code
0411
0452
9999
0111
Description
Details of cost for 10 nos.
MaterialsBrass door latch 300x16x5 mm
Brass screws 25 mm
Carriage of materials
LabourCarpenter 1 st class
TOTAL
Add for water charge @ 1 %
TOTAL
Add for contractors profit and overheads @
15%
Cost of 10 nos.
Cost of 1 no.
Say
9.75 : Providing and fixing bright finished brass door latch with necessary
complete :
9.75.2 : 250x16x5 mm
Description
Details of cost for 10 nos.
MaterialsBrass door latch 250x16x5 mm
0412
Brass screws 25 mm
0452
Carriage of materials
9999
LabourCode
382
Unit
Quantity
Rate
Amount
each
100 Nos
L.S.
10.00
60.00
2.73
51.00
86.00
1.00
510.00
51.60
2.73
Day
0.10
151.50
15.15
579.48
5.79
585.27
87.79
673.06
67.31
67.30
Unit
Quantity
Rate
Amount
each
100 Nos
L.S.
10.00
90.00
3.64
85.00
76.00
1.00
850.00
68.40
3.64
Day
0.12
151.50
18.18
940.22
9.40
949.62
142.44
1092.06
109.21
109.20
Unit
Quantity
Rate
Amount
each
100 Nos
L.S.
10.00
90.00
3.64
82.00
76.00
1.00
820.00
68.40
3.64
Code
0111
Description
Carpenter 1st class
TOTAL
Add for water charge @ 1 %
TOTAL
Add for contractors profit and overheads @
15%
Cost of 10 nos.
Cost of 1 no.
Say
9.76 :
Description
Details of cost for 1 No.
Materials100 mm mortice latch & lock with 6 levers
0413
LabourCarpenter 1st class
0111
Sundries (screws, carriage etc.)
9999
TOTAL
Add for water charge @ 1 %
TOTAL
Add for contractors profit and overheads @
15%
Cost of 1 mortice latch and lock
Say
Code
9.77 :
Description
Details of cost for 1 No.
Materials100 mm mortice latch
0414
LabourCarpenter 1st class
0111
Sundries (screws, carriage etc.)
9999
TOTAL
Add for water charge @ 1 %
TOTAL
Add for contractors profit and overheads @
15%
Cost of 1 mortice latch and lock
Say
Code
9.78 :
Code
Description
Details of cost for 1 No.
MaterialsBrass night latch
Labour-
0438
383
Unit
Day
Quantity
0.12
Rate
151.50
Amount
18.18
910.22
9.10
919.32
137.90
1057.22
105.72
105.70
Quantity
Rate
Amount
each
1.00
257.00
257.00
Day
L.S.
0.17
3.64
151.50
1.00
25.76
3.64
286.40
2.86
289.26
43.39
332.65
332.65
Quantity
Rate
Amount
each
1.00
235.00
235.00
Day
L.S.
0.17
3.64
151.50
1.00
25.76
3.64
264.40
2.64
267.04
40.06
307.10
307.10
Quantity
Rate
Amount
each
1.00
338.00
338.00
Description
Code
Carpenter 1st class
0111
Sundries (screws, carriage etc.)
9999
TOTAL
Add for water charge @ 1 %
TOTAL
Add for contractors profit and overheads @
15%
Cost of 1 mortice latch and lock
Say
9.79 : Providing and fixing special quality bright finished brass cupboard
locks with four levers including necessary screws etc. complete (be
approved quality):
9.79.1 : 40 mm
Code
Description
9.79 :
384
Unit
Day
L.S.
Quantity
0.17
3.64
Rate
151.50
1.00
Amount
25.76
3.64
367.40
3.67
371.07
55.66
426.73
426.75
Unit
Quantity
Rate
Amount
each
1.00
36.00
36.00
Day
L.S.
0.17
3.64
151.50
1.00
25.76
3.64
65.40
0.65
66.05
9.91
75.96
75.95
Unit
Quantity
Rate
Amount
each
1.00
43.00
43.00
Day
L.S.
0.17
3.64
151.50
1.00
25.76
3.64
72.40
0.72
73.12
10.97
84.09
84.10
385
9.79 : Providing and fixing special quality bright finished brass cupboar
locks with four levers including necessary screws etc. complete (
approved quality):
9.79.3 : 65 mm
Code
Description
Unit
each
Day
L.S.
9.79
9.80 :
each
Day
L.S.
Description
Details of cost for 10 nos.
MaterialsCupboard knob
0447
Carriage of material
9999
LabourCarpenter 1 st class
0111
TOTAL
Add for water charge @ 1%
TOTAL
Add for contractors profit and overheads @
15%
Cost of 10 cupboard knob
Cost of 1 cupboard knob
Say
Code
Unit
Unit
each
L.S.
Day
Quantity
1.00
0.17
3.64
Rate
Amount
55.00
55.00
151.50
1.00
25.76
3.64
84.40
0.84
85.24
12.79
98.03
98.05
Quantity
1.00
0.17
3.64
Rate
Amount
70.00
70.00
151.50
1.00
25.76
3.64
99.40
0.99
100.39
15.06
115.45
115.45
10.00
2.73
0.14
Rate
Amount
18.00
1.00
180.00
2.73
151.50
21.21
203.94
2.04
205.98
30.90
236.88
23.69
23.70
9.81 : Providing and fixing bright finished brass handles with screws etc
9.81.1 : 125 mm
Code
Description
9.81 :
Providing and fixing bright finished brass handles with screws e
9.81.2 :100 mm
Description
Details of cost for 10 nos.
MaterialsBright finished brass handles 100 mm
0409
Brass screws 25 mm
0452
Carriage of material
9999
LabourCarpenter 1st class
0111
TOTAL
Add for water charge @ 1 %
TOTAL
Add for contractors profit and overheads @
15%
Cost of 10 handles
Cost of 1 handle
Say
Code
9.81 :
9.81.3 :
Code
0410
Description
Details of cost for 10 nos.
MaterialsBright finished brass handles 75 mm
Brass screws 25 mm
Carriage of material
9999
LabourCarpenter 1 st class
0111
TOTAL
Add for water charge @ 1 %
TOTAL
Add for contractors profit and overheads @
15%
Cost of 10 handles
Cost of 1 handle
Say
0452
386
Quantity
Rate
Amount
each
100 Nos
L.S.
10.00
40.00
2.73
85.00
76.00
1.00
850.00
30.40
2.73
Day
0.06
151.50
9.09
892.22
8.92
901.14
135.17
1 036.31
103.63
103.65
Quantity
Rate
Amount
each
100 Nos
L.S.
10.00
40.00
0.91
75.00
76.00
1.00
750.00
30.40
0.91
Day
0.06
151.50
9.09
790.40
7.90
798.30
119.74
918.04
91.80
91.80
Quantity
Rate
Amount
each
10.00
550.00
100 Nos
L.S.
40.00
0.91
55.00
l
76.00
1.00
Day
0.06
151.50
9.09
590.40
5.90
596.30
89.44
30.40
0.91
685.74
68.57
68.55
9.82 : Providing and fixing bright finished brass hanging type floor door
necessary screws, etc. complete.
Description
Details of cost for 10 hanging floor door
stopper
MaterialsBright finished brass floor door stopper
2455
Brass screws 25 mm
0452
Carriage of material
9999
LabourCarpenter 1st class
0111
TOTAL
Add for water charge @ 1%
TOTAL
Add for contractors profit and overheads @
15%
Cost of 10 floor door stoppers
Cost of 1 floor door stopper
Say
Code
9.83 :
Description
Details of cost for 10 nos.
MaterialsHydraulic door closer with necessary
2456
accessories
Brass screws 30 mm
0451
Carriage of material
9999
LabourCarpenter 2nd class
0112
TOTAL
Add for water charge @ 1 %
TOTAL
Add for contractors profit and overheads @
15%
Cost of 10 floor door closers
Cost of 1 floor door closer
Say
Code
9.84 :
Description
Details of cost for 10 nos.
MaterialsHydraulic door closer
7060
Brass screws 30 mm
0451
Carriage of material
9999
LabourCarpenter 2nd class
0112
TOTAL
Code
387
Quantity
Rate
Amount
each
100 Nos
L.S.
10.00
20.00
2.73
46.00
76.00
1.00
460.00
15.20
2.73
Day
0.03
151.50
4.54
482.47
4.82
487.29
73.09
560.38
56.04
56.05
Quantity
Rate
Amount
each
10.00
506.00
5060.00
100 Nos
L.S.
60.00
3.64
86.00
1.00
51.60
3.64
Day
1.00
141.60
141.60
5256.84
52.57
5309.41
796.41
6105.82
610.58
610.60
Quantity
Rate
Amount
each
100 Nos
L.S.
10.00
60.00
1.00
765.00
86.00
1.04
7650.00
51.60
1.04
Day
1.00
141.60
141.60
7844.24
Code
Description
Add for water charge @ 1%
TOTAL
Add for contractors profit and overheads @
15%
Cost of 10 floor door closers
Cost of 1 floor door closer
Say
9.85 :
Code
Description
0423
0452
9999
0111
388
Unit
Quantity
Rate
Amount
78.44
7922.68
1188.40
9111.08
911.11
911.10
Quantity
Rate
Amount
each
100 Nos
L.S.
10.00
40.00
0.91
26.00
76.00
1.00
260.00
30.40
0.91
Day
0.10
151.50
15.15
306.46
3.06
309.52
46.43
355.95
35.60
35.60
Unit
Quantity
Rate
Amount
each
100 Nos
L.S.
10.00
40.00
0.91
66.00
86.00
1.00
660.00
34.40
0.91
Day
0.10
151.50
15.15
710.46
7.10
717.56
107.63
825.19
82.52
82.50
9.86 :
9.86.2 :
Description
Details of cost for 10 nos.
MaterialsBrass casement stayes 250 mm
0425
Brass screws 25 mm
0452
Carriage of material
9999
LabourCarpenter 1 st class
0111
TOTAL
Add for water charge @ 1 %
TOTAL
Add for contractors profit and overheads @
15%
Cost of 10 casement stayes
Cost of 1 casement staye
Say
Code
Description
Details of cost for 10 nos.
MaterialsBrass casement stayes 200 mm
0426
Brass screws 25 mm
0452
Carriage of material
9999
LabourCarpenter 1 st class
0111
TOTAL
Add for water charge @ 1 %
TOTAL
Add for contractors profit and overheads @
15%
Cost of 10 casement stayes
Cost of 1 casement staye
Say
Code
Providing and fixing bright finished brass hasp and staple (safety
necessary screws etc. complete:
9.87.1: 150 mm
9.87 :
Description
Details of cost for 10 nos.
MaterialsBrass Safety hasps & staples 150 mm
0431
Brass screws 25 mm
0452
Carriage of material
9999
LabourCarpenter 1st class
0111
TOTAL
Code
389
Unit
Quantity
Rate
Amount
each
100 Nos
L.S.
10.00
40.00
0.91
55.00
76.00
1.00
550.00
30.40
0.91
Day
0.10
151.50
15.15
596.46
5.96
602.42
90.36
692.78
69.28
69.30
Unit
Quantity
Rate
Amount
each
100 Nos
L.S.
10.00
40.00
0.91
46.00
76.00
1.00
460.00
30.40
0.91
Day
0.10
151.50
15.15
506.46
5.06
511.52
76.73
588.25
58.83
58.80
Unit
Quantity
Rate
Amount
10 Nos
100 Nos
L.S.
10.00
80.00
1.82
458.00
76.00
1.00
458.00
60.80
1.82
Day
0.08
151.50
12.12
532.74
Code
Description
Add for water charge @ 1%
TOTAL
Add for contractors profit and overheads @
15%
Cost of 10 hasps and staples
Cost of 1 hasps and staple
Say
9.87 : Providing and fixing bright finished brass hasp and staple (safety
necessary screws etc. complete:
9.87.2 :
115 mm
Description
Details of cost for 10 nos.
MaterialsBrass Safety hasps & staples 115 mm
0432
Brass screws 20 mm
0453
Carriage of material
9999
LabourCarpenter 1st class
0111
TOTAL
Add for water charge @ 1%
TOTAL
Add for contractors profit and overheads @
15%
Cost of 10 hasps and staples
Cost of 1 hasps and staple
Say
Code
9.87 : Providing and fixing bright finished brass hasp and staple (safety
necessary screws etc. complete:
9.87.3: 90 mm
Description
Details of cost for 10 nos.
MaterialsBrass Safety hasps & staples 90 mm
0433
Brass screws 20 mm
0453
Carriage of material
9999
LabourCarpenter 1 st class
0111
TOTAL
Add for water charge @ 1 %
TOTAL
Add for contractors profit and overheads @
15%
Cost of 10 hasps and staples
Cost of 1 hasps and staple
Say
Code
390
Unit
Quantity
Rate
Amount
5.33
538.07
80.71
618.78
61.88
61.90
Unit
Quantity
Rate
Amount
10 Nos
100 Nos
L.S.
10.00
70.00
1.82
378.00
53.00
1.00
378.00
37.10
1.82
Day
0.08
151.50
12.12
429.04
4.29
433.33
65.00
498.33
49.83
49.85
Unit
Quantity
Rate
Amount
10 Nos
100 Nos
L.S.
10.00
70.00
1.82
300.00
53.00
1.00
300.00
37.10
1.82
Day
0.08
151.50
12.12
351.04
3.51
354.55
53.18
407.73
40.77
40.75
9.88 : Providing and fixing chromium plated brass 100 mm mortice latch
levers and a pair of lever handles with necessary screws etc. comp
of approved quality).
Code
Description
9.89 : Providing and fixing chromium plated brass night latch including n
etc. complete (Best make of approved quality).
Description
Details of cost for 1 No.
MaterialsBrass night latch
0583
LabourCarpenter 1st class
0111
Sundries (screws, carriage etc.)
9999
TOTAL
Add for water charge @ 1 %
TOTAL
Add for contractors profit and overheads @
15%
Cost of 1 mortice latch and lock
Say
Code
9.90 : Providing and fixing special quality chromium plated brass cupboa
six levers including necessary screws etc. complete (Best make of
quality) of :
9.90.1: Size 40 mm
Description
Details of cost for 1 No.
Materials40 mm lock
2468
LabourCarpenter 1st class
0111
Sundries & screws
9999
TOTAL
Add for water charge @ 1 %
TOTAL
Add for contractors profit and overheads @
15%
Cost of 1 mortice latch and lock
Say
Code
391
Quantity
Rate
Amount
each
1.00
323.00
323.00
Day
L.S.
0.17
3.64
151.50
1.00
25.76
3.64
352.40
3.52
355.92
53.39
409.31
409.30
Quantity
Rate
Amount
each
1.00
383.00
383.00
Day
L.S.
0.17
3.64
151.50
1.00
25.76
3.64
412.40
4.12
416.52
62.48
479.00
479.00
Unit
Quantity
Rate
Amount
each
1.00
38.00
38.00
Day
L.S.
0.17
3.64
151.50
1.00
25.76
3.64
67.40
0.67
68.07
10.21
78.28
78.30
Description
Details of cost for 1 No.
Materials50 mm lock
2469
LabourCarpenter 1st class
0111
Sundries & screws
9999
TOTAL
Add for water charge @ 1 %
TOTAL
Add for contractors profit and overheads @
15%
Cost of 1 mortice latch and lock
Say
Code
Description
Details of cost for 1 no.
Materials65 mm lock
2470
LabourCarpenter 1 st class
0111
Sundries & screws
9999
TOTAL
Add for water charge @ 1 %
TOTAL
Add for contractors profit and overheads @
15%
Cost of 1 mortice latch and lock
Say
Code
9.90 :
9.90.4 :
Description
Code
Details of cost for one
Materials75 mm lock
2471
LabourCarpenter 1st class
0111
Sundries & screws
9999
TOTAL
Add for water charge @ 1 %
392
Unit
Quantity
Rate
Amount
each
1.00
53.00
53.00
Day
L.S.
0.17
3.64
151.50
1.00
25.76
3.64
82.40
0.82
83.22
12.48
95.70
95.70
Unit
Quantity
Rate
Amount
each
1.00
64.00
64.00
Day
L.S.
0.17
3.64
151.50
1.00
25.76
3.64
93.40
0.93
94.33
14.15
108.48
108.50
Unit
Quantity
Rate
Amount
each
1.00
75.00
75.00
Day
L.S.
0.17
3.64
151.50
1.00
25.76
3.64
104.40
1.04
Code
Description
TOTAL
Add for contractors profit and overheads @
15%
Cost of 1 mortice latch and lock
Say
9.91:
Code
Description
0584
9999
0111
9.92 : Providing and fixing chromium plated brass handles with necessa
complete:
9.92.1:125 mm
Code
0555
0452
9999
0111
Description
Details of cost for 10 nos.
MaterialsChromium plated brass handles 125 mm
Brass screws 25 mm
Carriage of material
LabourCarpenter 1 st class
TOTAL
Add for water charge @ 1 %
TOTAL
Add for contractors profit and overheads @
15%
Cost of 10 handles
Cost of 1 handle
Say
9.92 :
0556
0452
Description
Details of cost for 10 nos.
MaterialsChromium plated brass handles 100 mm
Brass screws 25 mm
393
Unit
Quantity
Rate
Amount
105.44
15.82
121.26
121.25
Quantity
Rate
Amount
each
L.S.
10.00
2.73
25.00
1.00
250.00
2.73
Day
0.14
151.50
21.21
273.94
2.74
276.68
41.50
318.18
31.82
31.80
Unit
Quantity
Rate
Amount
each
100 Nos
L.S.
10.00
40.00
2.73
92.00
76.00
1.00
920.00
30.40
2.73
Day
0.06
151.50
9.09
962.22
9.62
971.84
145.78
1 117.62
111.76
111.75
Unit
Quantity
Rate
Amount
each
100 Nos
10.00
40.00
79.00
76.00
790.00
30.40
Description
Code
Carriage of material
9999
LabourCarpenter 1 st class
0111
TOTAL
Add for water charge @ 1%
TOTAL
Add for contractors profit and overheads @
15%
Cost of 10 handles
Cost of 1 handle
Say
9.92
9.92.3 :
Description
Details of cost for 10 nos.
MaterialsChromium plated brass handles 75 mm
0557
Brass screws 25 mm
0452
Carriage of material
9999
LabourCarpenter 1st class
0111
TOTAL
Add for water charge @ 1%
TOTAL
Add for contractors profit and overheads @
15%
Cost of 10 handles
Cost of 1 handle
Say
Code
9.93 :
Code
Description
394
Unit
L.S.
Quantity
0.91
Rate
1.00
Amount
0.91
Day
0.06
151.50
9.09
830.40
8.30
838.70
125.80
964.50
96.45
96.45
Unit
Quantity
Rate
Amount
each
100 Nos
L.S.
10.00
40.00
0.91
68.00
76.00
1.00
680.00
30.40
0.91
Day
0.06
151.50
9.09
720.40
7.20
727.60
109.14
836.74
83.67
83.65
Quantity
Rate
Amount
each
100 Nos
L.S.
10.00
40.00
0.91
55.00
83.00
1.00
550.00
33.20
0.91
Day
0.10
151.50
15.15
599.26
5.99
605.25
90.79
696.04
69.60
69.60
9.94 :
9.94.1 :
Code
Description
Code
0570
0588
9999
0111
Description
Details of cost for 10 nos.
MaterialsC.P. brass casement stays 250 mm
C.P. brass screws 25 mm
Carriage of material
LabourCarpenter 1st class
TOTAL
Add for water charge @ 1 %
TOTAL
Add for contractors profit and overheads @
15%
Cost of 10 window fasteners
Cost of 1 window fastener
Say
9.94 Providing and fixing chromium plated brass casement stays (stra
with necessary screws etc. complete :
9.94.3
Description
Details of cost for 10 nos.
MaterialsC.P. brass casement stays 200 mm
0571
C.P. brass screws 25 mm
0588
Carriage of material
9999
LabourCarpenter 1st class
0111
TOTAL
Code
395
Unit
Quantity
Rate
Amount
each
100 Nos
L.S.
10.00
40.00
0.91
73.00
83.00
1.00
730.00
33.20
0.91
Day
0.10
151.50
15.15
779.26
7.79
787.05
118.06
905.11
90.51
90.50
Unit
Quantity
Rate
Amount
each
100 Nos
L.S.
10.00
40.00
0.91
67.00
83.00
1.00
670.00
33.20
0.91
Day
0.10
151.50
15.15
719.26
7.19
726.45
108.97
835.42
83.54
83.55
Unit
Quantity
Rate
Amount
each
100 Nos
L.S.
10.00
40.00
0.91
56.00
83.00
1.00
560.00
33.20
0.91
Day
0.10
151.50
15.15
609.26
Code
Description
Add for water charge @ 1 %
TOTAL
Add for contractors profit and overheads @
15%
Cost of 10 window fasteners
Cost of 1 window fastener
Say
Code
Description
9.95 :
9.95.2 :
125x63x4 mm
Description
Details of cost for 10 nos.
MaterialsAluminium butt hinges 125x63x4.00 mm
0688
C.P.brass screws 50 mm
0585
Carriage of materials
9999
LabourCarpenter 1 st class
0111
Beldar
0114
TOTAL
Add for water charge @ 1 %
TOTAL
Add for contractors profit and overheads @
15%
Cost of 10 nos.
Cost of 1 no.
Say
Code
396
Unit
Quantity
Rate
Amount
6.09
615.35
92.30
707.65
70.77
70.75
Quantity
Rate
Amount
10 Nos
100 Nos
L.S.
10.00
100.00
3.64
478.00
123.00
1.00
478.00
123.00
3.64
Day
Day
0.14
0.09
151.50
135.25
21.21
12.17
638.02
6.38
644.40
96.66
741.06
74.11
74.10
Quantity
Rate
Amount
10 Nos
100 Nos
L.S.
10.00
100.00
3.64
447.00
123.00
1.00
447.00
123.00
3.64
Day
Day
0.14
0.09
151.50
135.25
21.21
12.17
607.02
6.07
613.09
91.96
705.05
70.51
70.50
9.95 : Providing and fixing ISI marked aluminium butt hinges anodised
not less than grade AC 10 as per IS : 1868) transparent or dyed t
or shade with necessary screws etc. complete:
9.95.3 100x75x4 mm
Code
0689
0586
9999
0111
0114
Description
Details of cost for 10 nos.
MaterialsAluminium butt hinges 100x75x4.00 mm
C.P.brass screws 40 mm
Carriage of materials
LabourCarpenter 1 st class
Beldar
TOTAL
Add for water charge @ 1%
TOTAL
Add for contractors profit and overheads @
15%
Cost of 10 nos.
Cost of 1 no.
Say
Description
Details of cost for 10 nos.
MaterialsAluminium butt hinges 100x63x4.00 mm
0691
C.P.brass screws 40 mm
0586
Carriage of materials
9999
LabourCarpenter 1st class
0111
Beldar
0114
TOTAL
Add for water charge @ 1%
TOTAL
Add for contractors profit and overheads @
15%
Cost of 10 nos.
Cost of 1 no.
Say
Code
Code
0690
0586
Description
Details of cost for 10 nos.
MaterialsAluminium butt hingesl00x63x3.20 mm
C.P.brass screws 40 mm
397
Quantity
Rate
Amount
10 Nos
100 Nos
L.S.
10.00
80.00
2.73
416.00
150.00
1.00
416.00
120.00
2.73
Day
Day
0.14
0.09
151.50
135.25
21.21
12.17
572.11
5.72
577.83
86.67
664.50
66.45
66.45
Quantity
Rate
Amount
10 Nos
100 Nos
L.S.
10.00
80.00
2.73
354.00
150.00
1.00
354.00
120.00
2.73
Day
Day
0.14
0.09
151.50
135.25
21.21
12.17
510.11
5.10
515.21
77.28
592.49
59.25
59.25
Quantity
Rate
Amount
10 Nos
100 Nos
10.00
80.00
390.00
150.00
390.00
120.00
Description
Carriage of materials
9999
LabourCarpenter 1 st class
0111
Beldar
0114
TOTAL
Add for water charge @ 1 %
TOTAL
Add for contractors profit and overheads @
15%
Cost of 10 nos.
Cost of 1 no.
Say
Code
9.95 :
9.95.6 :
Description
Details of cost for 10 nos.
MaterialsAluminium butt hinges 75x63x4.00 mm
0692
C.P.brass screws 30 mm
0587
Carriage of materials
9999
LabourCarpenter 1st class
0111
Beldar
0114
TOTAL
Add for water charge @ 1 %
TOTAL
Add for contractors profit and overheads @
15%
Cost of 10 nos.
Cost of 1 no.
Say
Code
Description
Details of cost for 10 nos.
MaterialsAluminium butt hinges 75x63x3.20 mm
0693
C.P.brass screws 30 mm
0587
Carriage of materials
9999
LabourCarpenter 1st class
0111
Beldar
0114
TOTAL
Add for water charge @ 1%
TOTAL
Add for contractors profit and overheads @
15%
Cost of 10 nos.
Cost of 1 no.
Say
Code
398
Unit
L.S.
Quantity
2.73
Rate
1.00
Amount
2.73
Day
Day
0.14
0.09
151.50
135.25
21.21
12.17
546.11
5.46
551.57
82.74
634.31
63.43
63.45
Quantity
Rate
Amount
10 Nos
100 Nos
L.S.
10.00
60.00
1.82
281.00
90.00
1.00
281.00
54.00
1.82
Day
Day
0.14
0.09
151.50
135.25
21.21
12.17
370.20
3.70
373.90
56.08
429.98
43.00
43.00
Quantity
Rate
Amount
10 Nos
100 Nos
L.S.
10.00
60.00
1.82
215.00
90.00
1.00
215.00
54.00
1.82
Day
Day
0.14
0.09
151.50
135.25
21.21
12.17
304.20
3.04
307.24
46.09
353.33
35.33
35.35
9.95 :
9.95.8 :
75x45x3.2 mm
Description
Details of cost for 10 nos.
MaterialsAluminium butt hinges 75x45x3.20 mm
0694
C.P.brass screws 30 mm
0587
Carriage of materials
9999
LabourCarpenter 1 st class
0111
Beldar
0114
TOTAL
Add for water charge @ 1%
TOTAL
Add for contractors profit and overheads @
15%
Cost of 10 nos.
Cost of 1 no.
Say
Code
9.96 Providing and fixing aluminium sliding door bolts ISI marked anod
coating not less than grade AC 10 as per IS : 1868) transparent or
colour or shade with nuts and screws etc. complete :
9.96.1
300x16 mm
Description
Details of cost for 10 nos.
MaterialsAluminium sliding bolt 300x16 mm
0696
C.P. brass screws 25 mm
0588
Carriage of materials
9999
LabourCarpenter 1st class
0111
TOTAL
Add for water charge @ 1%
TOTAL
Add for contractors profit and overheads @
15%
Cost of 10 sliding bolts
Cost of 1 sliding bolt
Say
Code
9.96 Providing and fixing aluminium sliding door bolts ISI marked anod
coating not less than grade AC 10 as per IS : 1868) transparent or
colour or shade with nuts and screws etc. complete :
9.96.2
Code
0697
0588
250x16 mm
Description
Details of cost for 10 nos.
MaterialsAluminium sliding bolt 250x16 mm
C.P. brass screws 25 mm
399
Quantity
Rate
Amount
10 Nos
100 Nos
L.S.
10.00
60.00
1.82
98.00
90.00
1.00
98.00
54.00
1.82
Day
Day
0.14
0.09
151.50
135.25
21.21
12.17
187.20
1.87
189.07
28.36
217.43
21.74
21.75
Quantity
Rate
Amount
each
100 Nos
L.S.
10.00
40.00
5.46
125.00
83.00
1.00
1 250.00
33.20
5.46
Day
0.50
151.50
75.75
1 364.41
13.64
1 378.05
206.71
1 584.76
158.48
158.50
Quantity
Rate
Amount
each
100 Nos
10.00
40.00
104.00
83.00
1 040.00
33.20
Description
Code
Carriage of materials
9999
LabourCarpenter 1st class
0111
TOTAL
Add for water charge @ 1 %
TOTAL
Add for contractors profit and overheads @
15%
Cost of 10 sliding bolts
Cost of 1 sliding bolt
Say
9.97 : Providing and fixing aluminium tower bolts ISI marked anodised (a
not less than grade AC 10 as per IS : 1868 ) transparent or dyed to
or shade with necessary screws etc. complete :
9.97.1 300x10 mm
Description
Details of cost for 10 nos.
MaterialsAluminium tower bolt (barrel type)300x10
0698
mm
C.P. brass screws 30 mm
0587
Carriage of materials
9999
LabourCarpenter 1st class
0111
TOTAL
Add for water charge @ 1%
TOTAL
Add for contractors profit and overheads @
15%
Cost of 10 tower bolts
Cost of 1 tower bolt
Say
Code
9.97 : Providing and fixing aluminium tower bolts ISI marked anodised (a
not less than grade AC 10 as per IS : 1868 ) transparent or dyed to
or shade with necessary screws etc. complete :
9.97.2 : 250x10 mm
Description
Details of cost for 10 nos.
MaterialsAluminium tower bolt (barrel type) 250x10
0699
mm
C.P. brass screws 30 mm
0587
Carriage of materials
9999
LabourCarpenter 1st class
0111
TOTAL
Add for water charge @ 1 %
TOTAL
Add for contractors profit and overheads @
15%
Cost of 10 tower bolts
Cost of 1 tower bolt
Say
Code
400
Unit
L.S.
Quantity
5.46
Rate
1.00
Amount
5.46
Day
0.50
151.50
75.75
1154.41
11.54
1165.95
174.89
1340.84
134.08
134.10
Quantity
Rate
Amount
10 Nos
10.00
520.00
520.00
100 Nos
L.S.
80.00
4.42
90.00
1.00
72.00
4.42
Day
0.125
151.50
18.94
615.36
6.15
621.51
93.23
714.74
71.47
71.45
Quantity
Rate
Amount
10 Nos
10.00
440.00
440.00
100 Nos
L.S.
80.00
4.42
90.00
1.00
72.00
4.42
Day
0.125
151.50
18.94
535.36
5.35
540.71
81.11
621.82
62.18
62.20
9.97 :
9.97.3 :
Code
Description
Description
Details of cost for 10 nos.
MaterialsAluminium tower bolt barrel type) 150x10
0701
mm
C.P. brass screws 30 mm
0587
Carriage of materials
9999
LabourCarpenter 1st class
0111
TOTAL
Add for water charge @ 1%
TOTAL
Add for contractors profit and overheads @
15%
Cost of 10 tower bolts
Cost of 1 tower bolt
Say
Code
9.97 : Providing and fixing aluminium tower bolts ISI marked anodised (
not less than grade AC 10 as per IS : 1868 ) transparent or dyed t
or shade with necessary screws etc. complete :
9.97.5 : 100x10 mm
Code
0702
0587
Description
Details of cost for 10 nos.
MaterialsAluminium tower bolt (barrel type) 100x10 mm
C.P. brass screws 30 mm
401
Quantity
Rate
Amount
10 Nos
10.00
354.00
354.00
100 Nos
L.S.
80.00
2.73
90.00
1.00
72.00
2.73
Day
0.125
151.50
18.94
447.67
4.48
452.15
67.82
519.97
52.00
52.00
Quantity
Rate
Amount
10 Nos
10.00
281.00
281.00
100 Nos
L.S.
80.00
2.73
90.00
1.00
72.00
2.73
Day
0.08
151.50
12.12
367.85
3.68
371.53
55.73
427.26
42.73
42.75
Quantity
Rate
Amount
10 Nos
100 Nos
10.00
60.00
208.00
90.00
208.00
54.00
Description
Carriage of materials
9999
LabourCarpenter 1st class
0111
TOTAL
Add for water charge @ 1 %
TOTAL
Add for contractors profit and overheads @
15%
Cost of 10 tower bolts
Cost of 1 tower bolt
Say
Code
9.98 :
Providing and fixing aluminium pull bolt lock anodised ISI marked
not less than grade AC 10 as per IS : 1868) transparent or dyed t
and shade with necessary screws bolts, nuts and washers etc. co
Code
Description
9.99 :
Description
Details of cost for 10 nos.
Materials
Kicking plate 50 cm long - 100x3.15 mm
0706
C.P. brass screws 25 mm
0588
Carriage of materials
9999
LabourCarpenter 1 st class
0111
Beldar
0114
TOTAL
Add for water charge @ 1 %
TOTAL
Add for contractors profit and overheads @
15%
Cost of 10 kicking plates
Cost of 1 kicking plate
Say
Code
402
Unit
L.S.
Quantity
2.73
Rate
1.00
Amount
2.73
Day
0.08
151.50
12.12
276.85
2.77
279.62
41.94
321.56
32.16
32.15
Quantity
Rate
Amount
each
10.00
34.00
340.00
L.S.
6.37
1.00
6.37
Day
0.25
141.60
35.40
381.77
3.82
385.59
57.84
443.43
44.34
44.35
Quantity
Rate
Amount
each
100 Nos
L.S.
10.00
40.00
5.46
94.00
83.00
1.00
940.00
33.20
5.46
Day
Day
0.07
0.05
151.50
135.25
10.60
6.76
996.02
9.96
1005.98
150.90
1156.88
115.69
115.70
9.100 : Providing and fixing aluminium handles ISI marked anodised (anod
less than grade AC 10 as per IS : 1868) transparent or dyed to req
shade with necessary screws etc. complete :
9.100.1 : 125 mm
Code
Description
9.100 : Providing and fixing aluminium handles ISI marked anodised (anod
less than grade AC 10 as per IS : 1868) transparent or dyed to req
shade with necessary screws etc. complete :
9.100.2 : 100 mm
Description
Details of cost for 10 nos.
MaterialsAluminium handles 100 mm
0704
C.P. brass screws 25 mm
0588
Carriage of materials
9999
LabourCarpenter 1 st class
0111
TOTAL
Add for water charge @ 1 %
TOTAL
Add for contractors profit and overheads @
15%
Cost of 10 handles
Cost of 1 handle
Say
Code
9.100 :
9.100.3 : 75 mm
Code
0705
0589
Description
Details of cost for 10 nos.
MaterialsAluminium handles 75 mm
C.P. brass screws 25 mm
403
Unit
Quantity
Rate
Amount
10 Nos
100 Nos
L.S.
10.00
40.00
2.73
375.00
83.00
1.00
375.00
33.20
2.73
Day
0.06
151.50
9.09
420.02
4.20
424.22
63.63
487.85
48.79
48.80
Unit
Quantity
Rate
Amount
10 Nos
100 Nos
L.S.
10.00
40.00
1.82
260.00
83.00
1.00
260.00
33.20
1.82
Day
0.06
151.50
9.09
304.11
3.04
307.15
46.07
353.22
35.32
35.30
Unit
Quantity
Rate
Amount
10 Nos
100 Nos
10.00
40.00
208.00
63.00
208.00
25.20
Code
9999
0111
Description
Carriage of materials
LabourCarpenter 1st class
TOTAL
Add for water charge @ 1 %
TOTAL
Add for contractors profit and overheads @
15%
Cost of 10 handles
Cost of 1 handle
Say
Providing and fixing aluminium hanging floor door stopper ISI mar
(anodic coating not less than grade AC 10 as per IS : 1868) transp
required colour and shade with necessary screws etc. complete.
9.101.1: Single rubber stopper
9.101:
Code
2459
0588
9999
0111
9.101
Description
Details of cost for 10 nos.
MaterialsAluminium hanging floor door stopper 75 mm
C.P. brass screws 25 mm
Carriage of materials
LabourCarpenter 1 st class
TOTAL
Add for water charge @ 1 %
TOTAL
Add for contractors profit and overheads @
15%
Cost of 10 door stoppers
Cost of 1 stopper
Say
Providing and fixing aluminium hanging floor door stopper ISI mar
(anodic coating not less than grade AC 10 as per IS : 1868) transp
required colour and shade with necessary screws etc. complete.
9.101.2:
Code
7059
0588
9999
0111
Description
Details of cost for 10 nos.
MaterialsAluminium hanging floor door stopper with
twin rubber stopper
404
Unit
L.S.
Quantity
1.82
Rate
1.00
Amount
1.82
Day
0.06
151.50
9.09
244.11
2.44
246.55
36.98
283.53
28.35
28.35
Quantity
Rate
Amount
each
100 Nos
L.S.
10.00
20.00
2.73
14.00
83.00
1.00
140.00
16.60
2.73
Day
0.03
151.50
4.54
163.87
1.64
165.51
24.83
190.34
19.03
19.05
Quantity
Rate
Amount
each
10.00
44.00
440.00
100 Nos
L.S.
20.00
2.73
83.00
1.00
16.60
2.73
Day
0.03
51.50
4.54
463.87
4.64
468.51
70.28
538.79
53.88
53.90
9.102
Code
Description
2465
0588
9999
0111
9.103 :
Code
Description
Details of cost for 1 lock
Materials100 mm mortice latch and lock (without
handles)
Pair of aluminium handles
LabourCarpenter 1 st class
Sundries including carriage of materials
TOTAL
Add for water charge @ 1%
TOTAL
Add for contractors profit and overheads @
15%
Cost of 1 lock
Say
7001
7003
0111
9999
9.104 :
Code
Description
Details of cost for 2m long
MaterialsAluminium channel (heavy duty) with and
stop end as curtain rod
Labour
Sundries
TOTAL
Add for water charge @ 1%
TOTAL
Add for contractors profit and overheads @
15%
Cost of 2 m
Cost of 1 m
Say
7056
9999
9999
405
Quantity
Rate
Amount
each
100 Nos
L.S.
10.00
40.00
0.91
36.00
83.00
1.00
360.00
33.20
0.91
Day
0.10
151.50
15.15
409.26
4.09
413.35
62.00
475.35
47.54
47.55
Quantity
Rate
Amount
each
1.00
150.00
150.00
each
1.00
195.00
195.00
Day
L.S.
0.17
4.55
151.50
1.00
25.76
4.55
375.31
3.75
379.06
56.86
435.92
435.90
Quantity
Rate
Amount
metre
2.00
35.00
70.00
L.S.
L.S.
2.73
1.43
1.00
1.00
2.73
1.43
74.16
0.74
74.90
11.24
86.14
43.07
43.05
406
9.105 :
9.105.1:
Code
Description
7366
7367
7369
7020
0869
0763
7019
7048
7018
7021
1022
1211
9999
9999
0111
0112
0131
0114
Unit
sqm
metre
metre
100 Nos
each
each
kilogram
kilogram
roll
litre
10 Nos
100 Nos
L.S.
L.S.
Day
Day
Day
Day
43.80
12.00
40.15
392.00
22.00
18.00
19.27
4.82
0.58
7.88
44.00
44.00
52.00
130.00
6.57
2.85
1.10
7.67
Rate
Amount
190.00
8322.00
48.00
576.00
55.00
2208.25
40.00
156.80
8.00
7.00
2.50
50.00
120.00
176.00
126.00
48.18
241.00
70.08
76.00
9.00
598.88
39.60
21.00
1.00
1.00
9.24
52.00
130.00
151.50
141.60
141.60
135.25
995.36
403.14
155.05
1036.69
15344.27
153.44
15497.71
2324.66
17822.37
813.81
813.80
407
9.105: Providing and fixing partition upto ceiling height consisting of G.I.
required board including providing and fixing of frame work made
power pressed/ role form G.I. sheet with zinc coating of grade 175
floor and ceiling channel 50mm wide having equal flanges of 32mm
thick fixed to the floor and ceiling at the spacing of 610mm centre
dash fastener of 12.5mm dia meter 40mm length and the studs 48
one flange of 34mm and other flange 36mm and 0.50mm thick fixe
flanges of floor and ceiling channel and placed at a spacing of 610
centre by 6mm dia bolts and nuts at both ends of partition fixed fl
rawl plugs at spacing of 450mm centre to centre and fixing of boa
of frame work by 25mm, drive all screws on studs, floor and ceiling
spacing of 300mm centre to centre, including jointing and finishing
with recommended jointing compound, jointing tape, joint finisher
of primer suitable for board as per manufactures specificatior and
engineer-in-charge all complete,
9.105.2: 75mm overall thickness partition with 12.5mm thick double skin
board conforming to IS: 2095: part I
Code
8717
7367
7369
7020
0869
0763
7019
7048
7018
7021
1022
1211
9999
9999
0111
0112
0131
0114
Description
Materials for 6.00x3.65 = 21.9 sqm. (Partition
Panel)
(i) 12.5mm thick Plain
Gypsum board -2x6.00x3.65=43.80sqm.
(ii) 50mm floor and ceiling channel 2x6.00 = 12m
(iii) 48mm stud-72x34x36x0.5mm
(6.00/0.61)+1 = 11x3.65 = 40.15m
(iv) Screw 20mm long (drive all scews)
[(3.65/0.30)+1]x11x2 = 308
[(6.00/0.30)+1]x2x2=84 = 392
(v) Dash fastner [(6.00/0.61)+1]x2=22
(vi) Rawl plug [(3.65/0.45)+ 1]x2= 18
(vii) Plaster of paris, (88/100)x21.9 = 19.27
(viii) Glue (22/100)x21.90=4.82
(ix) Paper tape (120m roll)
(300/100)x21.90/120 = 0.584 Nos.
(x) Primer (36/100)21.90 = 7.88 litre
(xi) Galvanised steel bolts & nuts 6mm dia.
25mm Long 11x2x2=44
(xii) G.I. Plain washer for seam bolts
Sundries carriage
Sundries scaffolding
Labour for 21.90 sqm.
Carpernter 1st class 0.3x21.90
Carpenter Ilnd class 0.13x21.90
Painter 0.05x21.90
Beldar 0.35x21.90
TOTAL
Add for water charge @ 1%
TOTAL
Add for contractors profit and overheads @
15%
Cost for 21.90 sqm
Cost for 1 sqm.
Say
Unit
sqm
metre
metre
100 Nos
each
each
kilogram
kilogram
roll
litre
10 Nos
100 Nos
L.S.
L.S.
Day
Day
Day
Day
43.80
12.00
40.15
392.00
22.00
18.00
19.27
4.82
0.58
7.88
44.00
44.00
52.00
130.00
6.57
2.847
1.095
7.665
Rate
Amount
130.00
5694. 00
48.00
55.00
576.00
2 208.25
40.00
156.80
8.00
7.00
2.50
50.00
120.00
176.00
126.00
48.18
241.00
70.08
76.00
9.00
598.88
39.60
21.00
1.00
1.00
9.24
52.00
130.00
151.50
141.60
141.60
135.25
995.36
403.14
155.05
1036.69
12716.27
127.16
12843.43
1926.51
14769.94
674.43
674.45
408
9.105
9.105.3:
Code
Description
Materials for 6.00x3.65 = 21.9 sqm. (Partition
Panel)
(i) 8 mm thick tapered edge calcium silicate
board .
(ii) 50mm floor and ceiling channel 2x6.00
= 12m
(iii) 48mm stud-72x34x36x0.5mm
(6.00/0.61)+1 = 11x3.65= 40.15m
(iv) Screw 20mm long (drive all scews)
[(3.65/0.30)+1]x11x2 = 308
[(6.00/0.30)+1]x2x2=84 = 392
(v) Dash fastner [(6.00/0.61)+1]x2=22
(vi) Rawl plug [(3.65/0.45)+1]x2= 18
(vii) Plaster of paris, (88/100)x21.9 = 19.27
(viii) Glue (22/100)x21.90=4.82
(ix) Paper tape (120m roll)
(300/100)x21.90/120 = 0.584 Nos
(x) Primer (36/100)21.90 = 7.88 litre
(xi) Galvanised steel bolts & nuts 6mm dia.
25mm Long 11x2x2=44
(xii) G.I. Plain washer for seam bolts
Sundries carriage
Sundries scaffolding
Labour for 21.90 sqm.
Carpernter 1st class 0.3x21.90
Carpenter Ilnd class 0.13x21.90
Painter 0.05x21.90
Beldar 0.35x21.90
TOTAL
Add for water charge @ 1%
TOTAL
Add for contractors profit and overheads @
8699
7367
7369
7020
7019
7048
0869
0763
7018
7021
1022
1211
9999
9999
0111
0112
0131
0114
Unit
sqm
metre
metre
100 Nos
each
each
kilogram
kilogram
roll
litre
10 Nos
100 Nos
L.S.
L.S.
Day
Day
Day
Day
15%
Cost for 21.90 sqm
Cost for 1 sqm.
Say
43.80
12.00
40.15
392.00
22.00
18.00
19.27
4.82
0.584
7.88
44.00
44.00
52.00
130.00
6.57
2.847
1.095
7.665
Rate
Amount
194.00
8 497.20
48.00
576.00
55.00
2 208.25
40.00
156.80
8.00
7.00
2.50
50.00
120.00
176.00
126.00
48.18
241.00
70.08
76.00
9.00
598.88
39.60
21.00
1.00
1.00
9.24
52.00
130.00
151.50
141.60
141.60
135.25
995.36
403.14
155.05
1 036.69
15 519.47
155.19
15 674.66
2 351.20
18 025.86
823.10
823.10
Code
Description
Materials for 6.00x3.65 =21.9 sqm. (Partition
Panel)
(i) 8 mm thick multipurpose non asbestos fibre
cement board.
(ii) 50mm floor and ceiling channel 2x6.00
=12m
(iii) 48mm stud-72x34x36x0.5mm
(6.00/0.61)+1 = 11x3.65 = 40.15m
(iv) Screw 20mm long (drive all scews)
[(3.65/0.30)+1]x11x2 = 308
[(6.00/0.30)+1]x2x2=84 = 392
(v) Dash fastner [(6.00/0.61)+1]x2=22
(vi) Rawl plug [(3.65/0.45)+1]x2= 18
(vii) Plaster of paris, (88/100)x21.9 = 19.27
(viii) Glue (22/100)x21.90=4.82
(ix) Paper tape (120m roll)
(300/100)x21.90/120 = 0.584 No.
(x) Primer (36/100)21.90 = 7.88 litre
(xi) Galvanised steel bolts & nuts 6mm dia.
25mm Long 11x2x2=44
(xii) G.I. Plain washer for seam bolts
Sundries carriage
Sundries scaffolding
Labour for 21.90 sqm.
Carpernter 1st class 0.3x21.90
Carpenter Ilnd class 0.13x21.90
Painter 0.05x21.90
Beldar 0.35x21.90
TOTAL
Add for water charge @ 1%
TOTAL
Add for contractors profit and overheads @
15%
Cost for 21.90 sqm
Cost for 1 sqm.
0237
7367
7369
7020
7019
7048
0869
0763
7018
7021
1022
1211
9999
9999
0111
0112
0131
0114
Say
409
Quantity
Rate
Amount
sqm
43.80
239.00
10468.20
metre
12.00
48.00
576.00
metre
40.15
55.00
2208.25
100 Nos
392.00
40.00
156.80
each
each
kilogram
kilogram
roll
22.00
18.00
19.27
4.82
0.584
8.00
7.00
2.50
50.00
120.00
176.00
126.00
48.18
241.00
70.08
litre
10 Nos
7.88
44.00
76.00
9.00
598.88
39.60
100 Nos
L.S.
L.S.
44.90
52.00
130.00
21.00
1.00
1.00
9.24
52.00
130.00
Day
Day
Day
Day
6.57
2.847
1.095
7.665
151.50
141.60
141.60
135.25
995.36
403.14
155.05
1036.69
17490.47
174.90
17665.37
2649.81
20315.18
927.63
927.65
9.106 :
9.106.1:
Code
0639
0112
0639
0112
Description
9.106 :
9.106.2 :
Code
Description
Details of cost for ten
MaterialsPTMT handle 150x34x24mm
7513
Mild steel screws 25 mm
Carriage of materials
9999
LabourCarpenter 2nd class
TOTAL
Add for water charge @ 1 %
TOTAL
Add for contractors profit and overheads @
15%
Cost of 10 Nos
Cost of 1 No
Say
9.107 Providing and fixing PTMT Butt hinges with necessary screws etc
9.107.1
75x60x10 mm fitted with 5.5 mm dia M.S.Bright Bar Rod weigh
Code
0638
0112
0114
Description
Details of cost for ten
MaterialsPTMT butt hinges 75x60x10mm
7514
Iron screws 30 mm
Carriage of materials
9999
LabourCarpenter 2nd class
Beldar
TOTAL
Add for water charge @ 1 %
TOTAL
Add for contractors profit and overheads @
15%
Cost of lONos
Cost of 1 No
Say
410
Quantity
Rate
Amount
Each
100 Nos
L.S.
10.00
40.00
2.73
27.00
15.00
1.00
270.00
6.00
2.73
Day
0.06
141.60
8.50
287.23
2.87
290.10
43.52
333.62
33.36
33.35
Quantity
Rate
Amount
Each
100 Nos
L.S.
10.00
40.00
2.73
30.00
15.00
1.00
300.00
6.00
2.73
Day
0.06
141.60
8.50
317.23
3.17
320.40
48.06
368.46
36.85
36.85
Quantity
Rate
Amount
Each
100 Nos
L.S.
10.00
60.00
1.82
36.00
24.00
1.00
360.00
14.40
1.82
Day
Day
0.14
0.09
141.60
135.25
19.82
12.17
408.21
4.08
412.29
61.84
474.13
47.41
47.40
Providing and fixing PTMT Butt hinges with necessary screws etc.
9.107
9.107.2
100x75x10 mm fitted with 5.5 mm dia MSBright Bar Rod weighi
Code
7515
0637
9999
0112
0114
9.108
9.108.1
Code
7516
0638
9999
0112
Description
Details of cost for ten
MaterialsPTMT butt hinges 100x75x 10mm
Iron screws 40 mm
Carriage of materials
LabourCarpenter 2nd class
Beldar
TOTAL
Add for water charge @ 1%
TOTAL
Add for contractors profit and overheads
15%
Cost of lONos
Cost of 1 No
Say
Providing and fixing PTMT Tower Bolts with 12 mm one piece rod
necessary screws etc., complete.
152x42x18 mm weighing not less than 60 gms.
Description
Details of cost for ten
MaterialsPTMT Tower bolt 152x42x18mm
Mild steel screws 30 mm
Carriage of materials
LabourCarpenter 2nd class
TOTAL
Add for water charge @ 1 %
TOTAL
Add for contractors profit and overheads @
15%
Cost of lONos
Cost of 1 No
Say
Providing and fixing PTMT Tower Bolts with 12 mm one piece rod
necessary screws etc., complete.
9.108.2
202x42x18 mm weighing not less than 78 gms.
9.108
Code
7517
0638
9999
0112
Description
Details of cost for ten
MaterialsPTMT Tower bolt 202x42x 18mm
Mild steel screws 30 mm
Carriage of materials
LabourCarpenter 2nd class
TOTAL
Add for water charge @ 1%
TOTAL
Add for contractors profit and overheads @
15%
Cost of lONos
Cost of 1 No
Say
411
Quantity
Rate
Amount
Each
100 Nos
L.S.
10.00
80.00
2.73
48.00
30.00
1.00
480.00
24.00
2.73
Day
Day
0.14
0.09
141.60
135.25
19.82
12.17
538.72
5.39
544.11
81.62
625.73
62.57
62.55
an 60 gms.
Unit
Quantity
Rate
Amount
Each
100 Nos
L.S.
10.00
60.00
2.73
60.00
24.00
1.00
600.00
14.40
2.73
Day
0.08
141.60
11.33
628.46
6.28
634.74
95.21
729.95
73.00
73.00
han 78 gms.
Unit
Quantity
Rate
Amount
Each
100 Nos
L.S.
10.00
80.00
2.73
72.00
24.00
1.00
720.00
19.20
2.73
Day
0.10
141.60
14.16
756.09
7.56
763.65
114.55
878.20
87.82
87.80
9.109
Code
0639
0111
9.110
Code
Description
Details of cost for a bamboo jaffery of size
1.00m x 2.10m = 2.10 sqm
MATERIALS
(I) Bamboo 25mm of 100/ 2.50 = 40 nos
Half cut off = 40/2 .=20 nos. x 2.10 = 42.00m
Add wastage @ 15% = 6.30 m
Total = 48.30m
Bamboo 25 mm dia 2.5 metre long
Carriage of Bamboo
Hollock wood scantling
3 nos. (1.00 x 0.05 x 0.025) = 0.00375 cum
Add wastage @ 5% = 0.00019 cum
Total = 0.00394 cum or 3.94 cudm
Hollock wood in scantling
Carriage of Timber
Nails and wire
LABOUR
Carpenter 2nd class
Beldar
Sundries
TOTAL
Add 1 % for water charges.
TOTAL
Add 15% for contractors profit and
overheads.
Cost for 2.10 sqm
Cost for 1 sqm
Say
0305
0204
0112
0114
9999
2466
9999
9999
412
Quantity
Rate
Amount
Each
100 Nos
L.S.
10.00
20.00
2.73
24.00
15.00
1.00
240.00
3.00
2.73
Day
0.03
151.50
4.54
250.27
2.50
252.77
37.92
290.69
29.07
29.05
Quantity
Rate
Amount
Metre
L.S.
48.30
4.83
3.84
1.00
185.47
4.83
10 cudm
cum
L.S.
3.94
0.00394
20.25
217.00
60.81
1.00
85.50
0.24
20.25
Day
Day
L.S.
0.25
0.25
10.05
141.60
135.25
1.00
35.40
33.81
10.05
375.55
3.76
379.31
56.90
436.21
207.72
207.70
9.111
9.111.1
Code
1190
2204
0637
0111
9.112
Code
Description
Details of cost for 10.00 m
MATERIALS
2nd class teak wood lipping/ moulded beadibg
or Taj beading of size 18X5mm
LABOUR
Carpenter 2nd class
Beldar
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost for 10.00m
Cost for 1.00m
Say
8719
0112
0114
413
Unit
Quantity
Rate
Amount
10 cudm
cum
100 Nos
6.88
0.00688
6.00
410.00
60.81
30.00
282.08
0.42
1.80
sqm
0.50
16.55
8.28
Day
0.75
151.50
113.62
406.20
3.98
410.18
60.28
470.46
94.09
94.10
Quantity
Rate
Amount
metre
10.00
19.00
190.00
Day
Day
0.25
0.25
141.60
135.25
35.40
33.81
259.21
2.59
261.80
39.27
301.07
30.11
30.10
9.113
Code
Description
Details of cost for 1 no.
100 mm mostice lock with 6 levers for
aluminium door.
LABOUR
Carpenter 1st class
Sundries(screws, carriage etc)
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost for 1 no
Say
8716
0111
9999
9.114
9.114.1
Code
8714
9999
Code
8715
9999
Description
Details of cost for 1 No.
MATERIALS
Magenatic catcher double strip horizontal
type.
Sundries including screws and fixing charges. L.S.
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost for 1 No.
Say
414
Quantity
Rate
Amount
each
1.00
152.50
152.50
Day
L.S.
0.13
2.60
151.50
1.00
19.70
2.60
174.80
1.75
176.55
26.48
203.03
203.05
Quantity
Rate
Amount
each
1.00
2.60
13.50
1.00
13.50
2.60
16.10
0.16
16.26
2.44
18.70
18.70
Quantity
Rate
Amount
each
1.00
10.00
10.00
2.60
1.00
2.60
12.60
0.13
12.73
1.91
14.64
14.65
9.115
Code
Description
Details of cost for 10 sets.
MATERIALS
8703
9999
9999
9.116
Code
Description
Details of cost for 1 No.
MATERIALS
8704
9999
9.117 Providing and fixing factory made UPVC door frame made of U
having an overall dimension, as below (tolerance +/- 1mm) wi
2.0mm+/- 02mm. corners of the door frame to be jointed with
and stainless steel screws, joint mitred and plastic wilded. Th
of the frames reinforced by galvanized M.S. tube of size 19X1
mm wall thickness and 3 nos. stainless steel hinges fixed to th
per manufacturers specification and direction of Engineer-in-c
9.117.1
Code
0156
0114
Description
Detail of cost for 5 metre
MATERIALS
48mmX40mmX2mm thick Factory made door
8010
frame of PVC extruded sections in white, grey
or wooden finish
LABOUR
Carpenter (average)
Beldar
Sundries
9999
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 5 metre
Cost of 1.00 metre
Say
415
Quantity
Rate
Amount
set
L.S.
L.S.
10.00
19.50
100.10
92.00
1.00
1.00
920.00
19.50
100.10
1 039.60
10.40
1 050.00
157.50
1 207.50
120.75
120.75
Quantity
Rate
Amount
each
1.00
5.00
5.00
L.S.
1.04
1.00
1.04
6.04
0.06
6.10
0.92
7.02
7.00
Quantity
Rate
Amount
metre
5.00
112.00
560.00
Day
Day
L.S.
0.15
0.15
4.68
146.55
135.25
1.00
21.98
20.29
4.68
606.95
6.07
613.02
91.95
704.97
140.99
141.00
9.117
9.117.2
Code
8705
0156
0114
9999
9.118
9.118.1
Code
Description
Detail of cost for 2.38 sqm
one door shutter 2.20x1.08m = 2.38 sqm
MATERIALS
24 mm thick Factory made shutters with
frame, rails and panels of PVC extruded
sections in white, grey or wooden finish i/c
carriage
LABOUR
Carpenter (average)
8001
0156
416
Quantity
Rate
Amount
metre
5.00
117.00
585.00
Day
Day
L.S.
0.15
0.15
4.68
146.55
135.25
1.00
21.98
20.29
4.68
631.95
6.32
638.27
95.74
734.01
146.80
146.80
Quantity
Rate
Amount
sqm
2.38
1 830.00
4355.40
Day
0.400
146.55
58.62
Code
0114
9999
Description
Beldar
Sundries
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 2.38 sqm
Cost of 1.00 sqm
Say
9.118
9.118.2
Code
Description
Detail of cost for 2.38 sqm.
one door shutter 2.20x1.08m = 2.38 sqm
MATERIALS
30 mm thick Factory made shutters with
frame, rails and panels of PVC extruded
sections in white, grey or wooden finish
LABOUR
Carpenter (average)
Beldar
Sundries
Total
Add 1% for water charges
TOTAL
Add 15% for contractors profit and
overheads.
Cost of 2.38 sqm
Cost of 1.00 sqm
Say
8002
0156
0114
9999
9.118
9.118.3
417
Unit
Quantity
Rate
Amount
Day
L.S.
0.40
20.36
135.25
1.00
54.10
20.36
4488.48
44.88
4533.36
680.00
5213.36
2190.49
2190.50
oor frames.
yl Chloride (PVC) door shutter made of styles
size 30mm x 60mm and wall thickness 2mm
lding edging on one side. The styles and rails
mm mitre and welded at the corners. The- stiles
g galvanized M.S. tube of size 25x20mm and
ck rail made up of H section, a UPVC profile
2mm0.2mm wall thickness welded to the
tion single panel of size not less than 620mm,
nd 1 mm0.1 mm wall thickness with 20 mm
(4mm thick plain glass)/louver section, louver
actures specification and direction of Engineeroor Shutter)
Unit
Quantity
Rate
Amount
sqm
2.38
1 900.00
4 522.00
Day
Day
L.S.
0.40
0.40
20.36
146.55
135.25
1.00
58.62
54.10
20.36
4 655.08
46.55
4 701.63
705.24
5 406.87
2 271.79
2 271.80
frames.
foam. The Top & Bottom edges of the shutter are covered with
size 25mm X 11mm. Door shutter shall be reinforced with spec
reinforcements as per manufactures specification and drawing
necessary hardware and fixtures. Stickers indicating the locati
will be pasted at appropriate places
Code
8706
0156
0114
9999
Description
Detail of cost for 2.38 sqm
one door shutter 2.20x1.08m = 2.38 sqm
MATERIALS
25mm thick factory made PVC flash foor
shutter.
LABOUR
Carpenter (average)
Beldar
Sundries
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 2.38 sqm
Cost of 1.00 sqm
Say
9.119
Providing and fixing factory made P.V.C. door frame of size 50x
thickness of 5mm, made out of extruded 5mm rigid PVC foam s
and joined with 2 Nos. of 150mm long brackets of 15x15mm M
vertical door profiles to be reinforced with 19x19mm M.S. squa
EPDM rubber gasket weather seal to be provided through out t
frame to be fixed to the wall using M.S. screws of 65/100mm si
manufacturers specification and direction of Engineer-in-Charg
Code
Description
Details of cost for one door frame of 5 metre
MaterialsFactory made door frame PVC extruded sheet
i/c carriage
LabourCarpenter (average)
Beldar
Sundries
TOTAL
Add for water charge @ 1 %
TOTAL
Add for contractors profit and overheads @
15%
Cost of 5 metres
Cost of 1 metre
Say
8011
0156
0114
9999
9.120
9.120.1
30mm thick factory made solid panel PVC door shutter con
out of M.S. tubes of 19 gauge thickness and size of 19mm x 19
bottom rails. M.S .frame shall have a coat of steel primers of a
manufacture M.S. frame covered with 5mm thick heat moulded
418
Quantity
Rate
Amount
sqm
2.38
1 975.00
4 700.50
Day
Day
L.S.
0.40
0.40
20.36
146.55
135.25
1.00
58.62
54.10
20.36
4833.58
48.34
4881.92
732.29
5614.21
2358.91
2358.90
Quantity
Rate
Amount
metre
5.00
294.00
1470.00
Day
Day
L.S.
0.15
0.15
7.80
146.55
135.25
1.00
21.98
20.29
7.80
1520.07
15.20
1535.27
230.29
1765.56
353.11
353.10
419
8003
8100
0637
0640
0156
0114
9999
9.120
9.120.2
Description
Details of cost of one shutter 2.20x1.08m
= 2.38 sqm
MaterialsFactory made shutter i/c carriage
Powder coated M.S. butt hinges 100mm
X 58mm X 1.9mm
M.S. screws 40mm
M.S. screws 20mm
LabourCarpenter (average)
Beldar
Sundries
TOTAL
Add for water charge @ 1%
TOTAL
Add for contractors profit and overheads @
15%
Cost of 2.38 sqm
Cost per sqm
Say
Unit
sqm
10 Nos
100 Nos
100 Nos
Day
Day
L.S.
2.38
4.00
48.00
8.00
0.40
0.40
20.36
Rate
Amount
1743.00
66.00
4148.34
26.40
30.00
15.00
14.40
1.20
146.55
135.25
1.00
58.62
54.10
20.36
4323.42
43.23
4366.65
655.00
5021.65
2109.94
2109.95
Code
0637
0640
0156
0114
Description
Details of cost of one shutter 2.20x1.08m
= 2.38 sqm
MaterialsFactory made PVC shutter i/c carriage
8004
Powder coated M.S. butt hinges 100mm
8100
X58mmX1.9mm
M.S. screws 40mm
M.S. screws 20mm
LabourCarpenter (average)
Beldar
Sundries
9999
TOTAL
Add for water charge @ 1 %
TOTAL
Add for contractors profit and overheads @
15%
Cost of 2.38 sqm
Cost per sqm
Say
9.121 Providing and fixing Fiber Glass Reinforced plastic (FRP) Doo
section 90mm x 45mm having single rebate of 32mm x 15mm
30mm thickness .The laminate shall be molded with fire resis
polyester resin and chopped mat .Doorframe laminate shall b
be filled with suitable wooden block in all the three legs. The
with fibreglass from all sides. MS stay shall be provided at th
frame.
Code
8707
0156
0114
Description
Details of cost for one door frame of 5 metre
MaterialsFactory made glass reinforced plastic door
frame 90x45 mm i/c carriage.
LabourCarpenter (average)
Beldar
Sundries
9999
TOTAL
Add for water charge @ 1%
TOTAL
Add for contractors profit and overheads @
15%
Cost of 5 metres
Cost of 1 metre
Say
420
Unit
Quantity
Rate
Amount
sqm
10 Nos
2.38
4.00
2148.00
66.00
5112.24
26.40
100 Nos
100 Nos
48.00
8.00
30.00
15.00
14.40
1.20
Day
Day
L.S.
0.40
0.40
20.36
146.55
135.25
1.00
58.62
54.10
20.36
5 287.32
52.87
5 340.19
801.03
6141.22
2580.34
2580.35
forced plastic (FRP) Door Frames of crossebate of 32mm x 15mm to receive shutter of
e molded with fire resistant grade unsaturated
rframe laminate shall be 2mm thick and shall
n all the three legs. The frame shall be covered
shall be provided at the bottom to steady the
Unit
Quantity
Rate
Amount
metre
5.00
333.00
1665.00
Day
Day
L.S.
0.15
0.15
7.80
146.55
135.25
1.00
21.98
20.29
7.80
1715.07
17.15
1732.22
259.83
1992.05
398.41
398.40
8708
8100
0637
0640
0156
0114
9999
Description
Details of cost of one shutter 2.20x1.08m
= 2.38sqm
Materials30 mm thick factory made glass fiber
reinforced plastic panel door shutter i/c
carriage.
Powder coated M.S. butt hinges 100mm
X58mmX1.9mm
M.S. screws 40mm
M.S. screws 20mm
LabourCarpenter (average)
Beldar
Sundries
TOTAL
Add for water charge @ 1%
TOTAL
Add for contractors profit and overheads @
15%
Cost of 2.38 sqm
Cost per sqm
Say
9.122
9.122.2
Code
Description
Details of cost of one shutter 2.20x1.08m
= 2.38 sqm
Materials30 mm thick factory made glass fiber
reinforced plastic flush door shutter i/c
carriage.
Powder coated M.S. butt hinges 100mm
X58mmX 1.9mm
M.S. screws 40mm
M.S. screws 20mm
LabourCarpenter (average)
Beldar
Sundries
TOTAL
Add for water charge @ 1 %
TOTAL
8730
8100
0637
0640
0156
0114
9999
421
Quantity
Rate
Amount
sqm
2.38
1580.00
3760.40
10 Nos
4.00
66.00
26.40
100 Nos
100 Nos
48.00
8.00
30.00
15.00
14.40
1.20
Day
Day
L.S.
0.40
0.40
20.36
146.55
135.25
1.00
58.62
54.10
20.36
3935.48
39.35
3974.83
596.22
4571.05
1920.61
1920.60
Quantity
Rate
Amount
sqm
2.38
1960.00
4664.80
10 Nos
4.00
66.00
26.40
100 Nos
100 Nos
48.00
8.00
30.00
15.00
14.40
1.20
Day
Day
L.S.
0.40
0.40
20.36
146.55
135.25
1.00
58.62
54.10
20.36
4839.88
48.40
4888.28
Code
Description
Add for contractors profit and overheads @
15%
Cost of 2.38 sqm
Cost per sqm
Say
9.123
Code
Description
8710
0156
0114
9999
9.124
Code
Description
Details of cost of one shutter 2.20x1.08m
= 2.38 sqm
Materials28mm factory made solid PVC panel door
shutter i/c carriage.
Powder coated M.S. butt hinges 100mm
X58mmX 1.9mm
M.S. screws 40mm
M.S. screws 20mm
LabourCarpenter (average)
Beldar
Sundries
8711
8100
0637
0640
0156
0114
9999
422
Unit
Quantity
Rate
Amount
733.24
5 621.52
2 361.98
2 362.00
Quantity
Rate
Amount
metre
5.00
223.00
1115.00
Day
Day
L.S.
0.15
0.15
7.80
146.55
135.25
1.00
21.98
20.29
7.80
1165.07
11.65
1176.72
176.51
1353.23
270.65
270.65
Quantity
Rate
Amount
sqm
2.38
1 975.00
4700.50
10 Nos
4.00
66.00
26.40
100 Nos
100 Nos
48.00
8.00
30.00
15.00
14.40
1.20
Day
Day
L.S.
0.40
0.40
20.36
146.55
135.25
1.00
58.62
54.10
20.36
Code
Description
TOTAL
Add for water charge @ 1 %
TOTAL
Add for contractors profit and overheads @
15%
Cost of 2.38 sqm
Cost per sqm
Say
9.125
Code
Description
Details of cost for 1.0x0.3m = 0.3 sqm
MaterialsPVC rigid foam sheet1mm thick = 0.30 sqm
Add wastage @ 10% = 0.03 sqm
Total = 0.33 sqm
Rubber adhesive
LabourCarpenter 1 st class
Beldar
Mistry
TOTAL
Add for water charge @ 1 %
TOTAL
Add for contractors profit and overheads @
15%
Cost of 0.30 sqm
Cost per sqm
Say
8006
9999
0111
0114
0130
9.126
9.126.1
Code
8724
9999
0111
9999
423
Unit
Quantity
Rate
Amount
4875.58
48.76
4924.34
738.65
5662.99
2379.41
2379.40
Quantity
Rate
Amount
sqm
L.S.
0.33
21.84
145.00
1.00
47.85
21.84
Day
Day
Day
0.11
0.14
0.02
151.50
135.25
151.50
16.66
18.94
3.03
108.32
1.08
109.40
16.41
125.81
419.37
419.35
Unit
Quantity
Rate
Amount
sqm
0.80
740.00
592.00
L.S.
1.82
1.00
1.82
Day
L.S.
0.57
4.42
151.50
1.00
86.35
4.42
684.59
Code
Description
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 0.67 sqm.
Cost of 1 sqm.
Say
9.126
9.126.2
Code
8725
9999
0111
9999
9.127
9.127.1
Code
8726
9999
0111
0114
9999
424
Unit
Quantity
Rate
Amount
6.85
691.44
103.72
795.16
1 186.81
1 186.80
g to IS: 5509.
Unit
Quantity
Rate
Amount
sqm
0.80
690.00
552.00
L.S.
1.82
1.00
1.82
Day
L.S.
0.57
4.42
151.50
1.00
86.35
4.42
644.59
6.45
651.04
97.66
748.70
1117.46
1117.45
Unit
Quantity
Rate
Amount
sqm
L.S.
5.50
195.00
405.00
1.00
2227.50
195.00
Day
Day
L.S.
0.50
0.50
52.00
151.50
135.25
1.00
75.75
67.62
52.00
425
Code
Description
TOTAL
Add for water charges @ 1%
TOTAL
Add for contractors profit and overheads @
15%
Cost for 5.00 sqm
Cost for 1 sqm
Say
9.127
9.127.2
Code
8727
9999
0111
0114
9999
Unit
1.0 mm thick.
Description
Details of cost for 5.00 sqm
MATERIALS
Decorative laminate = 5.00 sqm
Add wastage @ 10% = 0.50 sqm
Total = 5.50 sqm
1.0mm thick decorative laminated sheet
Adhesive
LABOUR:Carpenter 1st class
Beldar
Sundries i/c nails etc.
TOTAL
Add for water charges @ 1 %
TOTAL
Add for contractors profit and overheads @
15%
Cost for 5.00 sqm
Cost for 1 sqm
Say
Unit
sqm
L.S.
Day
Day
L.S.
9.128
Code
Description
Detail of cost for a chajja 0.90 x 0.60 = 0.54
sqm
MATERIALS
Fiber glass reinforced plastic chajja including
accessories.
8713
Unit
sqm
Quantity
Rate
Amount
2617.87
26.18
2644.05
396.61
3040.66
608.13
608.15
Quantity
5.50
195.00
0.50
0.50
52.00
Rate
Amount
330.00
1.00
1815.00
195.00
151.50
135.25
1.00
75.75
67.62
52.00
2205.37
22.05
2227.42
334.11
2561.53
512.31
512.30
0.54
Rate
Amount
3 520.00
1 900.80
Code
9999
9999
Description
Carriage
fixing charges including sundries.
TOTAL
Add 1% for water charges
Total
Add 15% for contractors profit and overheads
Cost for 0.54 sqm
Cost for 1 sqm
Say
9.129
Providing and fixing cup board shutters 25mm thick, with prel
three layer particle board or graded wood particle board IS: 12
grade (Grade 1 Type II) having one side decorative lamination
balancing lamination including Ilnd class teak wood lipping of
thick with necessary screws and bright finished stainless steel
complete as per direction of the Engineer-in-Charge
Code
Description
Details of cost for one shutter 2.20x1.00m =
2.20sqm.
Materials
25 mm thick cup board shutter (prelaminated)
Carriage
lmm thick 35mm wide bright finished
stainless steel piano hinges .
Screws 25 mm long
Labour
Carpenter 1 st class
Beldar
Mistry
Add for wooden lipping 25 mm wide x 12 mm
thick
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost for2.20sqm.
Cost per sqm.
Say
7272
9999
8678
0685
0111
0114
0130
7271
9.130
9.130.1
Code
7269
0346
Providing and fixing cup board shutters with 25mm thick vene
IS : 3097 marked exterior grade (Grade I) of approved make in
teak wood lipping of 25mm wide x 12 mm thick with necessary
finished stainless steel piano hinges complete as per direction
Charge.
Description
Details of cost for one shutter 2.20x1.00m =
2.20sqm.
Materials
25 mm thick cup board shutter
Extra for teak veneering on one side and
commercial veneereing on other side
426
Unit
L.S.
L.S.
Quantity
26.00
143.00
Rate
1.00
1.00
Amount
26.00
143.00
2 069.80
20.70
2 090.50
313.58
2 404.08
4 452.00
4 452.00
Quantity
Rate
Amount
sqm
L.S.
metre
2.20
29.64
4.40
708.00
1.00
30.00
1557.60
29.64
132.00
100 Nos
125.00
16.00
20.00
Day
Day
Day
metre
0.50
0.50
0.07
7.00
151.50
135.25
151.50
28.00
75.75
67.62
10.60
196.00
2089.21
20.89
2110.10
316.52
2426.62
1103.01
1103.00
Quantity
Rate
Amount
sqm
sqm
2.20
2.20
390.00
198.00
858.00
435.60
Description
Carriage
9999
lmm thick 35mm wide bright finished
8678
stainless steel piano hinges.
Screws 25 mm long
Labour
Carpenter 1st class
Beldar
Mistry
Add for wooden lipping 25 mm wide x 12 mm
7271
thick
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost for 2.20sqm.
Cost per sqm.
Say
Code
0685
0111
0114
0130
Providing and fixing cup board shutters with 25mm thick vene
IS : 3097 marked exterior grade (Grade I) of approved make in
teak wood lipping of 25mm wide x 12 mm thick with necessar
finished stainless steel piano hinges complete as per direction
Charge.
9.130
9.130.2
Code
0347
7269
9999
8678
0685
0111
0114
0130
7271
Description
Details of cost for one shutter 2.20x1.00m =
2.20sqm.
Materials
25 mm thick particle board
Extra for commercial veneering on both sides
Carriage
1mm thick 35mm wide bright finished
stainless steel piano hinges.
Screws 25 mm long
Labour
Carpenter 1 st class
Beldar
Mistry
Add for wooden lipping 25 mm wide x 12 mm
thick
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost for 2.20sqm.
Cost per sqm.
Say
427
Unit
L.S.
metre
Quantity
29.64
4.40
Rate
1.00
30.00
Amount
29.64
132.00
100 Nos
125.00
16.00
20.00
Day
Day
Day
metre
0.50
0.50
0.07
7.00
151.50
135.25
151.50
28.00
75.75
67.62
10.60
196.00
1825.21
18.25
1843.46
276.52
2119.98
963.63
963.65
both sides.
Unit
Quantity
Rate
Amount
sqm
sqm
L.S.
metre
2.20
2.20
29.64
4.40
390.00
102.00
1.00
30.00
858.00
224.40
29.64
132.00
100 Nos
125.00
16.00
20.00
Day
Day
Day
metre
0.50
0.50
0.07
7.00
151.50
135.25
151.50
28.00
75.75
67.62
10.60
196.00
1 614.01
16.14
1 630.15
244.52
1 874.67
852.12
852.10
7445
7443
7444
0834
9999
25 mm thick.
Description
Details of cost for 2.10 sqm.
(Door size 2.1x1.00 = 2.10 sqm.)
Materials
Prelaminated particle board = 2.10sqm. +
Add for wastage @ 5% = 0.11 sqm.
= 2.21sqm.
Prelaminated particle board
Aluminium single cleat of size 30x32x3
Aluminium grip strip of size 50x12x2
Edge sealing water resistant paint
Carriage of materials including loading and
unloading
9999
0112
0114
9.132
Code
Description
Details of cost for 1 kg.
Material
Aluminum U beading = 1.00kg +
Add 10% wastage = 0.10
= 1.10kg.
Aluminium U Beading
Anodized 15 micron
Sundries including screws, fixing, carriage etc.
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost per kg.
Say
7449
9999
9999
9.133
428
Quantity
Rate
Amount
sqm
each
each
litre
L.S.
2.21
4.00
8.00
0.15
19.50
650.00
10.00
7.00
120.00
1.00
1436.50
40.00
56.00
18.00
19.50
L.S.
39.00
1.00
39.00
Day
Day
0.27
0.30
141.60
135.25
38.23
40.57
1687.80
16.88
1704.68
255.70
1960.38
933.52
933.50
Quantity
Rate
Amount
kilogram
L.S.
L.S.
1.10
65.00
13.00
195.00
1.00
1.00
214.50
65.00
13.00
292.50
2.92
295.42
44.31
339.73
339.75
9.133.1
9.133.1.1
Code
8700
8720
8721
8722
8723
9999
7018
9999
9999
0111
0114
Description
9.133
9.133.2
429
Unit
Quantity
Rate
Amount
sqm
metre
metre
each
cent
L.S.
roll
L.S.
L.S.
12.28
19.66
9.60
42.00
1.76
20.80
0.19
52.00
26.00
323.00
34.00
20.00
1.50
60.00
1.00
120.00
1.00
1.00
3 966.44
668.44
192.00
63.00
105.60
20.80
22.80
52.00
26.00
Day
Day
3.80
4.60
151.50
135.25
575.70
622.15
6 314.93
63.15
6 378.08
956.71
7 334.79
657.24
657.25
of flame (as per BS 476 part IV, V, VI, and VII) moisture , termi
with suitable fibre cement screw.
9.133.2.1
Code
0237
8720
8721
8722
8723
9999
7018
9999
9999
0111
0114
9.133
9.133.3
9.133.3.1
Code
8 mm thick.
Description
Details of cost for 3.66 m x 3.05 m =11.16
sqm.
MATERIALS
Multipurpose non asbestos fibre cement board
8mm thick.= 11.16 sqm
Add wastage @ 10% =1.12 sqm.
Total = 12.28 sqm
8 mm thick multipurpose non asbestos fibre
cement board.
Ceiling sections.
Perimeter channel
Nylon sleeves & wooden screws (40mm)
Counter sunk ribbed head screw 25mm.
Jointing compound
Joint tape roll
Sundries i/c rawl plug, scaffolfing etc.
Carriage of materials
LABOUR:Carpenter 1st class
Beldar
TOTAL
Add for water charges @ 1 %
TOTAL
Add for contractors profit and overheads @
15%
Cost for 11.16 sqm
Cost for 1 sqm
Say
Description
Details of cost for 3.66 m x 3.66 m - 11.16
sqm.
MATERIALS
Glass fibre reinforced gypsum board 12.5 mm
thick.= 11.16 sqm
Add wastage @ 10% = 1.12 sqm.
430
Unit
Quantity
Rate
Amount
sqm
12.28
239.00
2934.92
metre
metre
each
cent
L.S.
roll
L.S.
L.S.
19.66
9.60
42.00
1.76
20.80
0.19
52.00
26.00
34.00
20.00
1.50
60.00
1.00
120.00
1.00
1.00
668.44
192.00
63.00
105.60
20.80
22.80
52.00
26.00
Day
Day
3.80
4.60
151.50
135.25
575.70
622.15
5283.41
52.83
5336.24
800.44
6136.68
549.88
549.90
Quantity
Rate
Amount
Code
8717
8720
8721
8722
8723
9999
7018
9999
9999
0111
0114
Description
Total = 12.28 sqm
12.5 mm thick Glass fibre reinforced Gypsum
board.
Ceiling sections.
Perimeter channel
Nylon sleeves & wooden screws (40mm)
Counter sunk ribbed head screw 25mm.
Jointing compound
Joint tape roll
Sundries i/c rawl plug, scaffolfing etc.
Carriage of materials
LABOUR:Carpenter 1st class
Beldar
TOTAL
Add for water charges @ 1%
TOTAL
Add for contractors profit and overheads @
15%
Cost for 11.16 sqm
Cost for I sqm
Say
431
Unit
Quantity
Rate
Amount
sqm
12.28
130.00
1596.40
metre
metre
each
cent
L.S.
roll
L.S.
L.S.
19.66
9.60
42.00
1.76
20.80
0.19
52.00
26.00
34.00
20.00
1.50
60.00
1.00
120.00
1.00
1.00
668.44
192.00
63.00
105.60
20.80
22.80
52.00
26.00
Day
Day
3.80
4.60
151.50
135.25
575.70
622.15
3944.89
39.45
3984.34
597.65
4581.99
410.57
410.55
433
STEEL WORK
10.1 :
Code
Description
Details of cost for one quintal
Materials
Steel = 1.00q
Add wastage @ 5% = 0.05q
= 1.05q
Steel
Carriage
Labour:
Fitter (Grade I)
Blacksmith 2nd class
Beldar
(A) Priming cost-(Rate vide
item no. 13.50.3 finishing)
Sundries
TOTAL
Add 1% for water charges on all except A
TOTAL
Add 15% for contractors profit and
overheads on all except A
Cost of 1 qunital
Cost of 1 kg.
Say
1007
2205
0116
0103
0114
9999
10.2 :
Code
Description
Details of cost for a truss 7.6m clear span
Materials(i) Principal rafter (T-iron)
100x 100x 10mm @ 15kg/m = 142.50Kg+
Struts (angles)40x40x6mm
2xl.35=2.70m @ 3.5kg/m = 9.45kg
= 15l.95kg+
Add wastage @ 5% = 7.60kg
= 159.55kg. = 1.60q
Principal rafter (T-iron)
(ii) Ties (flats) 50x12mm
2x2.7 = 5.4m @4.7kg/m = 25.38kg+
Ties central (flats) 50x10mm
1x2.80 = 2.8m @3.90kg/m = 10.92kg.+
Braces (flats)40x 10mm
2x1.84 = 3.68m @3.9kg/m = 14.35kg.
= 50.65kg+
Add wastage @ 5% = 2.53kg.
= 53.18kg. =0.53q
1007
435
ion fixed with or without connecting plate includn and applying coat of approved steel primer all
Unit
Quantity
Rate
Amount
quintal
tonne
1.05
0.11
3100.00
47.29
3255.00
4.97
day
day
day
sqm
0.50
0.75
1.00
3.00
151.50
141.60
135.25
12.65
75.75
106.20
135.25
37.95
L.S
20.67
1.00
20.67
3635.75
35.98
3671.77
545.07
4216.84
42.17
42.15
Quantity
Rate
Amount
quintal
1.60
3100.00
4960.00
Code
1009
1010
1020
1221
2205
0116
0103
0139
0114
0100
9999
Description
Ties (flats) 50x12mm
(iii) Gusset plates 10mm thick
1x0.74x0.35m = 0.259sqm.+
shoe 4x0.46x0.46 = 0.845sqm.
= 1.104 sqm.
1.104sqm.@ 78.4kg/m = 86.55kg.
12mm plates at the point of principal rafter
and strut2x0.3x0.2 = 0.12sqm.+
Tie beam, brace and strut2x0.5x0.3 = 0.30sqm.+
Sole plates2x0.46x0.46 = 0.42sqm.+
Anchor plate2x0.46x0.1 =0.09sqm.
= 0.93 sqm.
Say 1.00 sqm.
1.00 sqm. @ 94.4kg/m = 94.40kg.
= 180.95kg.
Add wastage @ 5% = 9.05kg.
= 190.00kg or 1.90q
Gusset plates 10mm thick
(iv) 16mm dia. 50mm long rivets = 56 nos.+
Add wastage @ 5 % = 2.8 nos.
= 58.8 nos.
16mm dia. 50mm long rivets
(v) 20mm dia. holding down bolts
4 Nos.x460mm = 1840mm +
Add wastage @ 5% = 92mm
= 1932 mm
20mm dia. Holding down bolts
Carriage of
steel-(0.160+0.053+0.091 +0.099+0.007+0.005)
=0.415 tonne
LabourFitter (Grade I)
Blacksmith 2nd class
Beldars (Special)
Beldar
Bandhani
Applying priming coatT.Iron 9.5x0.4 = 3.80sqm.+
Struts 2.70x0.16 = 0.43sqm.+
Ties 5.4x0.124 = 0.67sqm.+
Braces 2x 1.84x0.12 = 0.44 sqm.+
Ties 2.8x0.12 = 0.34 sqm.
= 5.68 sqm.
(A) (Rate as per item 13.50.3 S.H. finishing)
Sundries
TOTAL
Add for water charges @ 1% on all except A
TOTAL
Add for contractors profit and overheads @
15% on all except A
Quantity of net steel
(151.95+50.65+180.95+6.5+5.04) = 395.09
436
Unit
quintal
Quantity
0.53
Rate
2875.00
Amount
1523.75
quintal
1.90
3400.00
6460.00
quintal
0.0684
3500.00
239.40
quintal
tonne
0.0529
0.415
3800.00
47.29
201.02
19.63
Day
Day
Day
Day
Day
2.70
3.60
5.40
3.60
0.44
151.50
141.60
138.45
135.25
138.45
409.05
509.76
747.63
486.90
60.92
sqm
L.S
5.68
80.73
12.65
1.00
71.85
80.73
15 770.64
156.99
15 927.63
2 378.37
Code
Description
kg = 3.95 quintal
Cost for 3.95 quintal
Cost of per kg.
Say
10.3 :
Code
Description
1007
1007
1008
2205
9999
9999
4013
0116
0102
0103
0123
0124
0114
437
Unit
Quantity
Rate
Amount
18 306.00
46.34
46.35
Quantity
Rate
Amount
quintal
0.53
3 100.00
1 643.00
quintal
0.13
3100.00
403.00
quintal
tonne
L.S.
L.S.
each
0.60
0.13
269.10
67.34
10.00
2900.00
47.29
1.00
1.00
19.00
1 740.00
5.96
269.10
67.34
190.00
sqm
10.50
12.65
132.82
Day
Day
Day
Day
Day
Day
3.00
6.00
6.00
0.50
0.50
8.00
151.50
151.50
141.60
151.50
141.60
135.25
454.50
909.00
849.60
75.75
70.80
1082.00
Code
9999
Description
Sundries
TOTAL
Add for water charges @ 1% on all except A
TOTAL
Add for contractors profit and overheads @
15%on all exceptA
Cost of 3.6sqm.
Cost per sqm.
Say
10.4 :
Code
Description
Details of cost for one double leaf door size
2.4x2.4m = 5.76sqm.
Materials(i) M.S. sheet lmm thick
5.76sqm. @ 7.85kg/sqm. = 45.2I6kg.+
Add wastage @ 10% = 4.522kg.
= 49.738kg = 0.497 q
M.S. Sheet 2x5.76= 11.52+
(ii) Gusset plates 3.00mm thick
Area of one gusset plates
0.3x0.04 = 0.0120+
1/2x0.26(0.04+0.3) = 0.0442
= 0.0562sqm.+
8x0.0562 = 0.4496sqm.+
2x22/7x1/4x0.3x0.3=0.1414sqm.
= 0.5910sqm.
0.5910sqm.@23.55kg/sqm.= 13.92kg.+
Add wastage @ 10% = 1.39kg
- 15.31kg. or 0.153q
Gusset plates
(iii) Angle iron
40x40x6mm @ 3.5kg/m
Sides-4x2.4=9.6m+
Bottom & top 4xi.2 = 4.8m+
Diagonals-2x2.5=5.0m+
2x2.45 = 4.9m+
Top and bottom guides
2x4.8 = 9.6m
Top guide supports
7x0.8 = 2.1m
= 36.0m
36m @3.5kg. per m. = 126kg.+
Add wastage 10%= 12.6kg.
= 138.6kg. or 1.39q
Angle iron
(iv)Channel 25x25x6mm @ 3.05kg/m
Bottom-2.4m : 2.4x3.05
1013
1010
1007
438
Unit
Quantity
Rate
Amount
L.S.
161.46
1.00
161.46
8054.33
79.22
8 133.55
1 200.11
9 333.66
2 592.68
2 592.70
Quantity
Rate
Amount
quintal
0.497
3475.00
1727.08
quintal
0.153
3400.00
520.20
quintal
1.39
3100.00
4309.00
Code
1007
2205
9999
0969
9999
9999
9999
0116
0102
0103
0114
0123
0124
9999
10.5 :
10.5.1 :
Code
1013
Description
Channel 40x40x6mm @ 5.56kg/m
0.5x5.56 = 2.78kg.
= 10.1kg.+
Add wastage @ 10% = 1.101 kg.
= 11.11kg. or 0.11q
Channel
Carriage-(0.0497+0.015+0.139+0.11 =0.2157
tonne)
(v) Pully guide blocks including drilling holes
(vi) 25mm dia. Pully
(vii) Handles and locking arrangements
(viii) Bolts and rivets
(ix)Cement concrete
Priming coatM.S. Sheet 2x5.76 = 11.52+
Angle iron 0.16x36 = 5.76+
Channel-0.15x2.4=0.36+
0.24x0.5=0.12
= 17.76 Say 18.0sqm
(A) (Rate as per item 13.50.3 of S.H. finishing)
LabourFitter (Grade 1)
Blacksmith 1st class
Blacksmith 2nd class
Beldar
Mason 1st class
Mason 2nd class
Sundries
TOTAL
Add for water charges @ 1% on all except A
TOTAL
Add for contractors profit and overheads @
15% on all exceptA
Cost of 5.76 sqm.
Cost per sqm.
Say
Providing and fixing 1mm thick M.S. sheet door with frame
and 3mm M.S. gusset plates at the junctions and corners, all
complete, including applying a priming coat of approved stee
Using M.S. angels 40x40x6 mm for diagonal braces.
Description
Details of cost for a double leaf door of size
2.4mx2.4m=5.76sqm.
Materials(i) M.S. sheet lmm thick
5.76sqm. @ 7.85kg/sqm. = 45.216kg.+
Add wastage @ 10% = 4.522kg.
= 49.738kg = 0.497 q
M.S. Sheet 2x5.76= 11.52+
(ii) Gusset plates 3.00mm thick
Area of one gusset plates
0.3x0.04 = 0.0120+
439
Unit
Quantity
Rate
Amount
quintal
tonne
0.11
0.22
3100.00
47.29
341.00
10.21
L.S.
each
L.S.
L.S.
L.S.
269.10
8.00
167.75
269.10
13.52
1.00
18.00
1.00
1.00
1.00
269.10
144.00
167.75
269.10
13.52
sqm
18.00
12.65
227.70
Day
Day
Day
Day
Day
Day
L.S.
2.00
3.00
4.00
4.00
0.06
0.06
161.46
151.50
151.50
141.60
135.25
151.50
141.60
1.00
303.00
454.50
566.40
541.00
9.09
8.50
161.46
10042.61
98.15
10140.76
1486.96
11627.72
2018.70
2018.70
Quantity
Rate
Amount
quintal
0.497
3 475.00
1727.08
Code
1013
1007
2205
1036
1222
1019
9999
9999
0 116
0102
0103
0123
0124
0114
9999
10.5 :
10.5.1 :
Code
Description
1/2x0.26(0.04+0.3) = 0.0442
= 0.0562sqm.+
8x0.0562 = 0.4496sqm.+
2x22/7xl/4x0.3x0.3=0.1414sqm.
= 0.5910sqm.
0.5910sqm.@23.55kg/sqm.= l3.92kg.+
Add wastage @ 10% = 1.39kg
= 15.31kg. or 0.153q
Gusset plates
(iii) Angle iron:40x40x6mm @3.5kg/m
Sides-4x2.40 = 9.6m+
Top & bottom-4xl.20=4.8m+
Diagonals-2x2.5=5.0m+
2x2.45 = 4.9m+
= 24.30m+
Add wastage @ 10% = 2.43m
=26.73m
26.73m @ 3.5kg. per m. = 93.56kg=0.936q
Angle iron
Carriage-(0.0497+0.0153+0.0936 tonne) =
0.1586 t
(iv) Pintles including welded pin
M.S. cleats with bolts an nuts to rest on pintles each
Hooks
Locking arrangements and handles
Rivets
Priming coatM.S. sheet = 11.52
Angle iron-0.16x24.3 = 3.89
(A) Rate As per items No. 13.50.3.
LabourFitter (Grade I)
Blacksmith 1st class
Blacksmith 2nd class
Mason 1st Class
Mason 2nd class
Beldar
Sundries
TOTAL
Add for water charges @ 1% on all except A
TOTAL
Add for contractors profit and overheads @
15% on all except A
Cost of 5.76 sqm.
Cost per sqm.
Providing and fixing 1mm thick M.S. sheet door with frame o
and 3mm M.S. gusset plates at the junctions and corners, all ne
complete, including applying a priming coat of approved steel p
Using M.S. angels 40x40x6 mm for diagonal braces.
Description
Details of cost for a double leaf door of size
2.4mx2.4m=5.76sqm.
Materials-
440
Unit
Quantity
Rate
Amount
quintal
0.153
3 475.00
531.67
quintal
tonne
0.936
0.1586
3 100.00
47.29
2 901.60
7.50
each
each
L.S.
L.S.
4.00
4.00
2.00
167.70
269.10
28.00
75.00
22.00
1.00
1.00
112.00
300.00
44.00
167.70
269.10
sqm
15.41
12.65
194.94
Day
Day
Day
Day
Day
Day
L.S.
2.00
3.00
4.00
0.06
0.06
5.00
161.46
151.50
151.50
141.60
151.50
141.60
135.25
1.43
303.00
454.50
566.40
9.09
8.50
676.25
161.46
8 434.79
82.40
8517.19
1 248.34
9 765.53
1695.40
1695.40
Unit
Quantity
Rate
Amount
Code
1013
1013
1007
2205
1036
1222
1019
9999
9999
0 116
0102
0103
0123
0124
0114
9999
Description
(i) M.S. sheet lmm thick
5.76sqm. @ 7.85kg/sqm. = 45.216kg.+
Add wastage @ 10% = 4.522kg.
= 49.738kg = 0.497 q
M.S. Sheet 2x5.76= 11.52+
(ii) Gusset plates 3.00mm thick
Area of one gusset plates
0.3x0.04 = 0.0120+
1/2x0.26(0.04+0.3) = 0.0442
= 0.0562sqm.+
8x0.0562 = 0.4496sqm.+
2x22/7xl/4x0.3x0.3=0.1414sqm.
= 0.5910sqm.
0.5910sqm.@23.55kg/sqm.= l3.92kg.+
Add wastage @ 10% = 1.39kg
= 15.31kg. or 0.153q
Gusset plates
(iii) Angle iron:40x40x6mm @3.5kg/m
Sides-4x2.40 = 9.6m+
Top & bottom-4xl.20=4.8m+
Diagonals-2x2.5=5.0m+
2x2.45 = 4.9m+
= 24.30m+
Add wastage @ 10% = 2.43m
=26.73m
26.73m @ 3.5kg. per m. = 93.56kg=0.936q
Angle iron
Carriage-(0.0497+0.0153+0.0936 tonne) =
0.1586 t
(iv) Pintles including welded pin
M.S. cleats with bolts an nuts to rest on pintles
Hooks
Locking arrangements and handles
Rivets
Priming coatM.S. sheet = 11.52
Angle iron-0.16x24.3 = 3.89
(A) Rate As per items No. 13.50.3.
LabourFitter (Grade I)
Blacksmith 1st class
Blacksmith 2nd class
Mason 1st Class
Mason 2nd class
Beldar
Sundries
TOTAL
Add for water charges @ 1% on all except A
TOTAL
Add for contractors profit and overheads @
15% on all except A
Cost of 5.76 sqm.
Cost per sqm.
441
Unit
Quantity
Rate
Amount
quintal
0.497
3 475.00
1 727.08
quintal
0.153
3 475.00
531.67
quintal
tonne
0.936
0.1586
3 100.00
47.29
2 901.60
7.50
each
each
each
L.S.
L.S.
4.00
4.00
2.00
167.70
269.10
28.00
75.00
22.00
1.00
1.00
112.00
300.00
44.00
167.70
269.10
sqm
15.41
12.65
194.94
Day
Day
Day
Day
Day
Day
L.S.
2.00
3.00
4.00
0.06
0.06
5.00
161.46
151.50
151.50
141.60
151.50
141.60
135.25
1.43
303.00
454.50
566.40
9.09
8.50
676.25
161.46
8 434.79
82.40
8517.19
1 248.34
9 765.53
1695.40
1695.40
10.5 :
Providing and fixing lmm thick M.S. sheet door with frame of 40x40x6mm
3mm M.S. gusset plates at the junctions and corners, all necessary fittings
applying a priming coat of approved steel primer.
10.5.2 :
Code
Using flats 30x6mm for diagonal braces and central cross piece.
Description
Details of cost for a double leaf door of size
2.40m x 2.40m= 5.76 sqm
Materials(i) M.S. sheet lmm thick
5.76sqm. @ 7.85kg/sqm. = 45.216kg.
Add wastage @ 10% = 4.522kg.
= 49.738kg = 0.497 q
M.S. Sheet
(ii) Gussets plates-3.00mm thick vide (ii) in
item 10.4 = 0.5910sqm.
at mid height = 4x0.0528 = 0.2112sqm.
= 0.8022sqm.
Add wastage @ 10% = 0.0802sqm.
=0.8824sqm. @ 23.55 kg/sqm =20.78 kg
= 0.2078 qtl
Gussets plates-3.00mm thick
(iii) Angle iron:40x40x6mm @3.5kg/m
Sides-4x2.40 = 9.6m
Top & bottom-4xl.20=4.8m
= 14.40m
Add wastage @ 10% = 1.44m
= 15.84m
15.84m @ 3.5kg. per m..= 55.44kg =0.554qtl
Angle iron
(iv) Flats 30x6mm @1.4kg/m
4x2.45=9.80m+
2xl.20=2.40m
= 12.20m+
Add wastage @ 10% = 1.22m
= 13.42m
13.42m @ 1.4kg. per m. = 18.788kg. = 0.188q
Flats
Carriage of (i) (ii) and
(iv)-0.0497+0.0208+0.0554+0.0188=0.1447
tonne
Pintles including welded pin
M.S. Cleats with bolts and nuts to rest on
pintles
Hooks
Locking arrangements and handles
Rivets
Applying priming coatM.S. sheet = 11.52
Angle iron-0.16x24.3 = 3.89
0.16x14.40 = 2.30+
Flats 0.072x12.2 = 0.88
= 14.70sqm.
(A) Rates as per Item No. 13.50.3
LabourFitter (Grade I)
Blacksmith 1st class
Blacksmith 2nd class
1013
1010
1007
1008
2205
1036
1222
1019
9999
9999
0116
0102
0103
442
Unit
Quantity
Rate
Amount
quintal
0.497
3 475.00
1727.08
quintal
0.2078
3 400.00
706.52
quintal
0.554
3100.00
1717.40
quintal
tonne
0.188
0.1447
2 900.00
47.29
545.20
6.84
each
each
4.00
4.00
28.00
75.00
112.00
300.00
each
L.S.
L.S.
2.00
167.70
269.10
22.00
1.00
1.00
44.00
167.70
269.10
sqm
14.70
12.65
185.96
Day
Day
Day
2.00
3.00
4.00
151.50
151.50
141.60
303.00
454.50
566.40
Code
0123
0124
0114
9999
Description
Mason 1st Class
Mason 2nd class
Beldar
Sundries
TOTAL
Add for water charges @ 1% on all except A
TOTAL
Add for contractors profit and overheads @
15% on all except A
Cost of 5.76 sqm.
Cost per sqm.
Say
10.6 :
10.6.1:
Code
0 973
0 974
0 975
9999
0116
0114
0123
0124
9999
443
Unit
Day
Day
Day
L.S.
Quantity
0.06
0.06
5.00
161.46
Rate
151.50
141.60
135.25
1.00
Amount
9.09
8.50
676.25
161.46
7 961.00
77.75
8038.75
1177.92
9216.67
1 600.12
1600.10
Quantity
Rate
Amount
sqm
metre
each
L.S.
7.50
2.50
1.00
53.82
767.00
400.00
170.00
1.00
5752.50
1000.00
170.00
53.82
Day
Day
Day
Day
L.S.
2.55
2.55
0.12
0.12
60.58
151.50
135.25
151.50
141.60
1.00
386.32
344.89
18.18
16.99
60.58
7803.28
78.03
7881.31
1182.20
9063.51
1208.47
1208.45
10.6 :
10.6.2 :
Code
7045
7047
0975
9999
0116
0114
0 123
0 124
9999
10.6 :
10.6.3 :
Code
7044
7046
0975
9999
0116
0114
0123
0124
9999
Supplying and fixing rolling shut Supplying and fixing rolling shutter
laths interlocked together througlaths interlocked together through
end by end locks mounted on speci
end by end locks mounted on spec
guides and arrangements for insi guides and arrangements for inside
complete including the cost of pr complete including the cost of prov
springs grade No.2 and M.S. topcsprings grade No.2 and M.S. topco
80x0.90 mm M.S. laths with 0.90 mm thick top cover.
Description
Cost of Rolling shutter
Details of cost for a shutter of size
3mx2.5m = 7.5sqm.
MaterialsCost of Rolling shutter
Top Cover
Coiled type spring
Carriage
LabourFitter (Grade I)
Beldar
Mason 1st Class
Mason 2nd class
Sundries
TOTAL
444
Quantity
Rate
sqm
metre
each
L.S.
7.50
2.50
1.00
53.82
615.00
228.00
170.00
1.00
Day
Day
Day
Day
L.S.
2.55
2.55
0.12
0.12
60.58
151.50
135.25
151.50
141.60
1.00
water charges @ 1%
contractors profit and overheads @
lying and fixing rolling shutters of approved make, made of required size M.S.
interlocked together through their entire length and jointed together at the
y end locks mounted on specially designed pipe shaft with brackets, side
s and arrangements for inside and outside locking with push and pull operation
lete including the cost of providing and fixing necessary 27.5cm long wire
gs grade No.2 and M.S. topcover of required thickness for rolling shutters.
mm thick top cover.
Unit
Quantity
Rate
sqm
metre
each
L.S.
7.50
2.50
1.00
60.58
576.00
205.00
170.00
1.00
Day
Day
Day
Day
L.S.
2.55
2.55
0.12
0.12
60.58
151.50
135.25
151.50
141.60
1.00
Rolling shutter
of cost for a shutter of size
m = 7.5sqm.
Rolling shutter
Amount
4 612.50
570.00
170.00
53.82
386.32
344.89
18.18
16.99
60.58
6 233.28
62.33
6 295.61
944.34
7 239.95
965.33
965.35
Amount
4320.00
512.50
170.00
60.58
386.32
344.89
18.18
16.99
60.58
5883.28
Code
Description
Add for water charges @ 1 %
TOTAL
Add for contractors profit and overheads @
15%
Cost of 7.5sqm.
Cost per sqm.
Say
Description
Details of cost for 1 No.
Ball bearing
Sundries
TOTAL
Add for water charges @ I %
TOTAL
Add for contractors profit and overheads@
15%
Cost of 1 no.
Say
10.8: Extra for providing mechanical device chain and crank operation for op
shutters.
10.8.1:Exceeding 10.00 sqm and upto 16.80 sqm in the area.
Code
0977
9999
Description
10.8: Extra for providing mechanical device chain and crank operation for op
shutters.
10.8.2:Exceeding 16.80 sqm in area.
Code
0978
9999
Description
Details of cost for one sqm.
Extra for mechanical devices chain and
cranked operation for operating rolling
shutters : exceeding 16,80 sq.m area of door
Sundries
TOTAL
Add for water charges @ 1%
TOTAL
445
Unit
Quantity
Rate
Amount
58.83
5942.11
891.32
6833.43
911.12
911.10
Unit
Quantity
Rate
Amount
each
L.S.
1.00
26.91
280.00
1.00
280.00
26.91
306.91
3.07
309.98
46.50
356.48
356.50
Unit
Quantity
Rate
Amount
sqm
1.00
400.00
400.00
L.S.
13.52
1.00
13.52
413.52
4.14
417.66
62.65
480.31
480.30
Unit
Quantity
Rate
Amount
sqm
1.00
450.00
450.00
L.S.
13.52
1.00
13.52
463.52
4.64
468.16
Code
Description
Add for contractors profit and overheads @
15%
Cost of 1 sqm.
Say
10.9:
Code
Description
7068
10.10:
Code
Description
Details of cost for one door 2x0.76m =
1.52sqm.(weight 15 kg)
Materials(A) Cement concrete blocks 15x10x10cm = 0.009
cum (Rate as per item No. 4.2.5 of S.H. C.C.)
LabourBlacksmith 1st class
Mason 1st Class
Mason 2nd class
Beldar
Glazier
Putty and sundries
TOTAL
Add for water charges @ 1% on all except A
TOTAL
0102
0123
0124
0114
0119
9999
446
Unit
Quantity
Rate
Amount
70.22
538.38
538.40
Quantity
Rate
Amount
sqm
1.50
185.00
277.50
277.50
2.78
280.28
42.04
322.32
214.88
214.90
Quantity
Rate
Amount
cum
0.009
3112.70
28.01
Day
Day
Day
Day
Day
L.S.
0.17
0.08
0.08
0.50
0.17
134.55
151.50
151.50
141.60
135.25
141.60
1.00
25.76
12.12
11.33
67.62
24.07
134.55
303.46
2.75
306.21
Code
Description
Add for contractors profit and overheads @
15% on all except A
Cost of 15 kg
Cost per kg
Say
10.11
Providing and fixing factory made ISI marked steel glazed doors
ventilators side /top /centre hung with beading and all members s
K12 B etc. complete of standard rolled steel sections, joints mitre
welded and sash bars tenoned and rivetted with 15x3mm lugs, 10
in cement concrete blocks 15x10x 10cm of 1:3:6 (1 cement : 3 coa
stone aggregate 20mm nominal size) or with wooden plugs and sc
plugs and screws or with fixing clips or with bolts and nuts as req
providing and fixing of hinges, pivots, float glass panes with glazi
metal sash putty of approved make and a priming coat of approve
excluding the cost of metal beading and other fittings except nece
pivots complete as per approved design.
Code
Description
4014
2406
9999
447
Unit
Quantity
Rate
Amount
41.73
347.94
23.20
23.20
Quantity
Rate
Amount
sqm
2.44
1 406.00
3 430.64
sqm
1.95
248.00
483.60
L.S.
80.73
1.00
80.73
kg
sqm
30.00
2.44
23.20
12.65
696.00
30.87
4721.84
39.95
4761.79
605.24
5367.03
178.90
178.90
10.12: Extra for providing and fixing steel beading of approved shape and s
screws instead of glazing clips and metal sash putty in steel doors, w
ventilators and composite units.
Code
1143
Description
Details of cost for 1 metre
beading for doors, windows,
Ventilatators and composit units
Cost of 1 metre beading
Applying priming coat
Fixing charges
TOTAL
Add water charges @ 1%
TOTAL
Add contractors profit and
overhead @ 15%
say
10.13: Providing and fixing T-iron frames for doors, windows and ventilator
Tee-sections, joints mitred and welded with 15x3 mm lugs, 10cm lon
cement concrete blocks 15x10x10 cm of 1:3:6 (1 cement : 3 coarse s
stone aggregate 20 mm nominal size) or with wooden plugs and scre
dash fastener or rawl plugs and screws or with fixing clips or with bo
requird including fixing.of necessary butt hinges and screws and app
coat of approved steel primer.
Code
1007
1002
1008
0 595
9999
9999
9999
0103
0116
0114
Description
Details of cost for 17.5Kg.
Materials
Tee iron 40x40x6mm = 2m+2m+lm = 5
metres
5 metres @3.5Kg/m = 17.5kg.+
Add wastage @ 5% = 0.87Kg.
= 18.37 kg. Say 0.18 qunital
Tee iron
M.S. bars 10mm = Ixlm = 1 metre
1 metre @ 0.60kg/m = 0.60Kg.+
Add wastage @ 5% = 0.03Kg.
= 0.63 Kg. Say = 0.006 qunital
M.S. bars
M.S. flat 15x3mm = 6x10cm = 0.60 metre
0.6 metre @ O.35kg/m = 0.21 Kg+
Add wastage @ 5% = 0.01 Kg.
= 0.22 kg.
M.S. fiat
Cement concrete block 1:3:66x15x10x10cm= 0.009 cum
(A)(Rate as per item no.4.2.5 of SH:4)
Butt hinges-100x58x 1.90mm
For screws and nuts and bolts
For applying steel primer
Carriage of material
LabourBlacksmith 2nd class
Fitter (Grade 1)
Beldar
448
Quantity
Rate
Amount
metre
L.S.
L.S.
1.00
0.46
3.01
15.00
1.00
1.00
15.00
0.46
3.01
18.47
0.18
18.65
2.80
21.45
21.45
Quantity
Rate
Amount
quintal
0.18
3 100.00
558.00
quintal
0.006
3 100.00
18.60
quintal
0.002
2 900.00
5.80
cum
10 Nos
L.S.
L.S.
L.S.
0.009
6.00
35.88
17.94
5.33
3 112.70
54.00
1.00
1.00
1.00
28.01
32.40
35.88
17.94
5.33
Day
Day
Day
0.10
0.15
0.20
141.60
151.50
135.25
14.16
22.72
27.05
Code
9999
10.14
10.14.1
Code
4006
7027
1007
9999
0116
0114
9999
Description
Sundries
TOTAL
Add for water charges @ 1% on all except A
TOTAL
Add for contractors profit and overheads @
15% on all exceptA
Cost for 17.5 Kg.
Cost for 1 Kg.
Say
449
Unit
Quantity
Rate
Amount
L.S.
8.97
1.00
8.97
774.86
7.47
782.33
113.15
895.48
51.17
51.15
Unit
Quantity
Rate
Amount
metre
10 Nos
quintal
5.00
6.00
0.03
170.00
80.00
3100.00
850.00
48:00
93.00
L.S.
5.33
1.00
5.33
Day
Day
L.S.
0.15
0.20
8.97
151.50
135.25
1.00
22.72
27.05
8.97
sqm
2.69
12.65
34.03
1 089.10
10.55
1 099.65
159.84
1 259.49
251.90
251.90
10.14
10.14.2
Code
4007
7027
1007
9999
0116
0114
9999
10.14
10.14.3
Code
4008
7027
1007
9999
0116
0114
450
Unit
Quantity
Rate
Amount
metre
10 Nos
quintal
5.00
6.00
0.03
187.00
80.00
3100.00
935.00
48.00
93.00
L.S.
5.33
1.00
5.33
Day
Day
L.S.
0.15
0.20
8.97
151.50
135.25
1.00
22.72
27.05
8.97
sqm
2.69
12.65
34.03
1174.10
11.40
1185.50
172.72
1358.22
271.64
271.65
Quantity
Rate
Amount
metre
10 Nos
quintal
5.00
6.00
0.03
214.00
80.00
3 100.00
1 070.00
48.00
93.00
L.S.
5.33
1.00
5.33
Day
Day
0.15
0.20
151.50
135.25
22.72
27.05
Code
9999
Description
Sundries
Steel
primer-500x2(2x 1.2+2x6.0+1x12.50cm)=2.69
sqm
(A)Rate as per item no 13.50.3 of SH : Finishing sqm
TOTAL
Add for water charges @ 1% on all except A
TOTAL
Add for contractors profit and overheads @
15% on all except A
Cost for 5m
Cost for 1 m
Say
10.15
Code
Description
Details of cost for 7.13Kg. Materials
L- section - 32x22x28mm 1.60mm thick
2.00+2.00+1.00 = 5.00 m
Width of MS sheet =
32+24.80+22+24.80+10mm = 113.60mm =
0.1136m
Area of MS sheet = 0.1136x5.00x0.0016 =
0.0009088 sqm
Weight of Sheet = 0.0009088x7850 = 7.134 kg
Add wastage @ 5% = 0.357Kg.
Total = 7.491 kg Say 7.49 kg
M.S. bars 10mm = lxlm = 1 metre
1 metre @ 0.60kg/m = 0.60Kg.
Add wastage @ 5% = 0.03 Kg.
= 0.63 Kg. Say = 0.006 qunital
M.S. bars
M.S. flat 15x3mm = 6x10cm = 0.60 metre
0.6 metre @ 0.35kg/m = 0.21 Kg
Add wastage @ 5% = 0.01 Kg.
= 0.22 kg.
M.S. flat
Cement concrete block 1:3:66x15x10x10cm= 0.009 cum
(A)(Rate as per item no 4.2.5 of SH:4)
Butt hinges-100x58x1.90mm
For screws and nuts and bolts
For applying steel primer
Carriage of material
LabourBlacksmith 2nd class
4011
1002
1008
0595
9999
9999
9999
0103
451
Unit
L.S.
Quantity
8.97
Rate
1.00
Amount
8.97
2.69
12.65
34.03
1309.10
12.75
1321.85
193.17
1515.02
303.00
Quantity
Rate
Amount
kg
7.49
53.00
396.97
quintal
0.006
3100.00
18.60
quintal
0.002
2900.00
5.80
cum
10 Nos
L.S.
L.S.
L.S.
0.009
6
35.88
17.94
5.33
3112.70
54.00
1.00
1.00
1.00
28.01
32.40
35.88
17.94
5.33
Day
0.04
141.60
5.66
Code
0116
0114
9999
Description
Fitter (Grade I)
Beldar
Sundries
TOTAL
Add for water charges @ 1% on all except A
TOTAL
Add for contractors profit and overheads @
15% on all except A
Cost for 7.13 Kg.
Cost for 1 Kg.
Say
10.16
10.16.1
Code
4009
2205
1215
0102
0100
0114
9999
Description
Details of cost for a truss of span 8 metre
weight = 119 kg.
Materials50mm dia. tube
Tie beam-lx8.0m = 8.00m+
Principal rafter 2x4.30m = 8.60m
= 16.60m
16.60m @ 5.10kg./m = 84.66kg.
40mm dia. tube
Members = 2(0.45+1.25+0.90+2.15)
= 2x4.75=9.50m
9.50m @ 3.61kg/m = 34.60Kg.
Total = 118.96kg.
Add wastage @ 5% = 5.94Kg.
= 124.90Kg. say 125 kg
Hot finished welded tubes
Carriage of tubes
Priming coat
50mm dia. tube 16.60x0.157m = 1.61 sqm.
40mm dia. tube 9.50x0.125m = 1.91 sqm.
= 2.80 sqm.
(A)(Rate as per item 13.50.3 of S.H. finishing)
Welding charges:Rafter:- 4x22/7x6.03 = 75.80cm.+
Ties:- 2x22/7x6.03=37.90cm.+
Members:-2x4x2x22/7x4.83=242.87cm
= 356.57cm say 357cm
Welding
LabourFor cutting, assembling & erection
Blacksmith 1st class
Bandhani
Beldar
Sundries
TOTAL
Add for water charges @ 1% on all except A
452
Unit
Day
Day
L.S.
Quantity
0.06
0.08
3.64
Rate
151.50
135.25
1.00
Amount
9.09
10.82
3.64
570.14
5.42
575.56
82.13
657.69
92.24
92.25
Unit
Quantity
Rate
Amount
kilogram
tonne
125 .00
0.125
38.00
47.29
4 750.00
5.91
sqm
2.80
12.65
35.42
cm
357.00
1.00
357.00
Day
Day
Day
L.S.
1.50
0.75
5.50
80.73
151.50
138.45
135.25
1.00
227.25
103.84
743.88
80.73
6 304.03
62.69
Code
Description
TOTAL
Add for contractors profit and overheads @
15% on all except A
Cost for 119 Kg.
Cost for 1 Kg.
Say
10.16
10.16.2
Code
4010
2205
1215
0102
0100
0114
9999
453
Unit
Quantity
Rate
Amount
6 366.72
949.70
7 316.42
61.49
61.50
Unit
Quantity
Rate
Amount
kilogram
tonne
125.00
0.125
42.00
47.29
5 250.00
5.91
sqm
2.80
12.65
35.42
cm
357.00
1.00
357.00
Day
Day
Day
L.S.
1.50
0.75
5.50
80.73
151.50
138.45
135.25
1.00
227.25
103.84
743.88
80.73
6804.03
67.69
6871.72
1025.45
7897.17
66.36
66.35
10.16
10.16.3
Code
4011
2205
1215
0102
0100
0114
9999
Description
Details of cost for a truss of span 8 metre
weight = 119 kg.
Materials50mm dia. tube
Tie beam-1x8.0m = 8.00m+
Principal rafter 2x4.30m = 8.60m
= 16.60m
16.60m @ 5.10kg./m = 84.66kg.
40mm dia. tube
Members = 2(0.45+1.25+0.90+2.15)
= 2x4.75=9.50m
9.50m @ 3.61kg/m = 34.60Kg.
Total = 118.96kg.
Add wastage @ 5% = 5.94Kg.
= 124.90Kg. say 125 kg.
Carriage of tubes
Priming coat
50mm dia. tube 16.60x0.157 m = 1.61 sqm.
40mm dia. tube 9.50x 10125m = 1.91 sqm.
=2.80 sqm.
(A) Rate as per item no 13.50.3 of SH : Finishing
Welding charges:Rafter:- 4x22/7x6.03 = 75.80cm.+
Ties :- 2x22/7x6.03=37.90cm.+
Members :- 2x4x2x22/7x4.83 = 242.87cm
= 356.57 cm say 357 cm
Welding
LABOUR
Blacksmith 1st class
Bandhani
Beldar
Sundries
TOTAL
Add for water charges @ 1% on all except A
TOTAL
Add for contractors profit and overheads @
15% on all except A
Cost for 119 Kg.
Cost for 1 Kg.
Say
10.17
Code
Description
Details of cost for 1 clamp
Materiats16mm dia. M.S. bar 1m @ 1.58 kg/m
454
t welded tubes.
Unit
Quantity
Rate
Amount
Kilogram
125.00
53.00
6 625.00
tonne
0.125
47.29
5.91
sqm
2.80
12.65
35.42
cm
357.00
1.00
357.00
Day
Day
Day
L.S.
1.50
0.75
5.50
80.73
151.50
138.45
135.25
1.00
227.25
103.84
743.88
80.73
8 179.03
81.44
8 260.47
1 233.76
9 494.23
79.78
79.80
Quantity
Rate
Amount
Code
1003
0103
0114
9999
Description
1x1.58 = 1.58Kg+
Add wastage @ 5% = 0.08 Kg.
= 1.66 Kg.
Say 1.70kg. or 0.017q
M.S. bar
LabourBlacksmith 2nd class
Beldar
Sundries (Carriage, fixing and painting etc.)
TOTAL
Add for water charges @ 1%
TOTAL
Add for contractors profit and overheads @
15%
Cost for I clamp
Say
10.18
Code
Description
Details of cost of one box clamp
MaterialsCircular C.I. Box including bottom and top
lids
12mm dia. M.S. bar 80cm @ 0.9kg/m 0.72kg+
Add wastage @ 5% - 0.036
0.756 kg. Say 0.008 q
LabourBlacksmith 2nd class
Beldar
Sundries (Carriage, fixing and painting etc.)
TOTAL
Add for water charges @ 1%
TOTAL
Add for contractors profit and overheads @
15%
Cost for 1 box clamp
Say
4012
1002
0103
0114
9999
455
Unit
Quantity
Rate
Amount
quintal
0.017
3 050.00
51.85
Day
Day
L.S.
0.04
0.04
1.82
141.60
135.25
1.00
5.66
5.41
1.82
64.74
0.65
65.39
9.81
75.20
75.20
Quantity
Rate
Amount
each
1.00
35.00
35.00
quintal
0.008
3100.00
24.80
Day
Day
L.S.
0.03
0.03
1.82
141.50
135.50
1.00
4.25
4.06
1.82
69.93
0.70
70.63
10.59
81.22
81.20
10.19
Code
1035
1010
0103
9999
10. 20
Code
1034
2205
0103
0114
9999
456
Quantity
Rate
Amount
quintal
0.019
4300.00
81.70
quintal
0.005
3400.00
17.00
day
L.S
0.03
4.55
141.60
1.00
4.25
4.55
107.50
1.08
108.58
16.29
124.87
52.03
52.05
Quantity
Rate
Amount
quintal
tonne
0.10
0.01
4300.00
47.29
430.00
0.47
day
day
L.S
0.38
0.38
4.55
141.60
135.25
1.00
53.81
51.40
4.55
40.23
5.40
545.63
81.84
627.47
62.75
62.75
10.21
Code
1020
2205
0116
0139
9999
10.22
Code
1214
9999
Discription
Discription
Details of cost for one cm.
Welding by gas electric plant including
transportation of welding plant at site etc.
complete
Sundries
TOTAL
Add for water charges @ 1 %
TOTAL
Add for contractors profit and overheads
@ 15%
Cost of 1 cm.
Say
10.23
Code
Discription
0423
9999
9999
457
sizes in position
Unit
Quantity
Rate
Amount
quintal
tonne
0.10
0.01
3500.00
47.29
350.00
0.47
day
day
L.S.
0.83
0.83
10.79
151.50
138.45
1.00
125.74
114.91
10.79
601.91
6.02
607.93
91.19
699.12
69.91
69.90
Quantity
Rate
Amount
cm
1.00
1.00
1.00
L.S.
0.26
1.00
0.26
1.26
0.01
1.27
0.19
1.46
1.45
casement window fasterners or peg stays to winand machine screws etc. complete.
Unit
Quantity
Rate
Amount
each
L.S
10.00
125.58
26.00
1.00
260.00
125.58
L.S
1.00
3.64
3.64
389.22
3.89
393.11
58.97
452.08
226.04
226.05
10.24
Code
Discription
0428
9999
9999
10.25
10.25.1
Code
1007
1010
1549
1003
2205
2271
458
Quantity
Rate
Amount
10 Nos.
L.S
10.00
125.58
109.00
109.00
L.S
3.64
1.00
3.64
238.22
2.38
240.60
36.09
1.00
125.58
276.69
27.67
27.65
Quantity
Rate
Amount
quintal
3.161
3100.00
9799.10
quintal
1.103
3400.00
3750.20
metre
26.65
160.00
4264.00
quintal
0.373
3050.00
1137.65
tonne
tonne
0.4637
0.0991
47.29
47.29
21.93
4.69
Code
1215
0102
0114
0100
9999
10.25
10.25.2
Code
1008
1002
2205
1215
0102
0114
0100
A
9999
Discription
3.72x26.65=99.14kg.
Welding charge (electric) 23.20m
Labour:
Blacksmith 1st class
Beldar
Bandhani
Applying priming coat
(i) steps 2.4x 14 = 33.60sqm.+
(ii) angles 4x 12.69x0.25 = 12.69sqm.+
(iii) Bars and other components = 2.00 sqm.
(L.S.)
(A) (Rate as per item no. 13.50.3)
Sundries
TOTAL
Add for water charges @ 1% on all except A
TOTAL
Add for contractors profit and overheads @
15% on all except A
Cost of 5.331 qunital
Cost per kg
say
459
Unit
Quantity
Rate
Amount
cm
2320.00
1.00
1220.00
day
day
day
1.85
1.25
0.60
151.50
135.25
138.45
280.28
169.06
83.07
sqm
L.S.
48.29
1.00
12.65
110.89
610.87
110.89
22551.74
219.41
22771.15
3324.04
26095.19
48.95
48.95
Quantity
Rate
Amount
quintal
0.145
2900.00
420.50
quintal
tonne
Cm
0.084
0.0229
60.00
3100.00
47.29
1.00
260.40
1.08
60.00
Day
Day
Day
0.70
0.50
0.25
151.50
135.25
138.45
106.05
67.62
34.61
Sqm
L.S.
0.60
4.55
12.65
1.00
7.59
4.55
962.40
9.55
971.95
144.65
1116.60
51.22
51.20
10.26
10.26.1
Code
4009
2205
(A)
0102
0114
0100
9999
10.26
10.26.2
Code
4011
2205
(A)
1215
Discription
Details of cost for hand rail of railing of two
flights of staircase, length of hand rail =
5.40m
MaterialsE.R.W. tube 40mm nominal bore = 5.40m @
3.28kg/m= 17.31kg
Add wastage @ 5% = 0.88 kg
Total = 18.59 kg
Carriage of tube
Priming coat 40mm
dia.Tube-5.4x22/7x0.0483 = 0.82 sqm
Rate as per item no 13.50.3 SH Finishing
Welding charges (joints of hand rail and
460
oved size by welding etc. to steel ladder railng including applying a priming coat of ap-
Unit
Quantity
Rate
Amount
kilogram
20.46
38.00
777.48
tonne
0.0205
47.29
0.97
sqm
cm
0.82
72.00
12.65
1.00
10.37
72.00
day
day
day
L.S.
0.24
0.90
0.12
12.48
1515.50
135.25
138.45
1.00
36.36
121.72
16.61
12.48
1047.99
10.38
1058.37
155.64
1214.01
62.29
62.30
Unit
Quantity
Rate
Amount
kilogram
18.59
53.00
985.20
tonne
0.0186
47.29
0.88
sqm
cm
0.82
72.00
12.65
1.00
10.37
72.00
Code
0102
0114
0100
9999
10.26
10.26.3
Code
1549
2271
(A)
1215
0102
0114
0100
9999
Discription
ballustards) 18x4x1.00 = 72cm
Labour for cutting assembling & erection
Blacksmith 1st class
Beldar
Bandhani
Sundries
TOTAL
Add for water charges @ 1% on all except A
TOTAL
Add for contractors profit and overheads @
15% on all except A
Cost of 17.71 Kg.
Cost per kg.
Say
461
Unit
Quantity
Rate
Amount
day
day
day
L.S.
0.24
0.90
0.12
12.48
151.50
135.25
138.45
1.00
36.36
121.72
16.61
12.48
1255.69
12.45
1268.14
188.67
1456.81
82.23
82.25
oved size by selding etc. to steel ladder railng including applying a priming coat of ap-
Unit
Quantity
Rate
Amount
metre
5.67
160.00
907.20
tonne
0.0211
47.29
1.00
sqm
cm
0.82
72.00
12.65
1.00
10.37
72.00
day
day
day
L.S.
0.24
0.90
0.12
12.48
151.50
135.25
138.45
1.00
36.36
121.72
16.61
12.48
1177.74
11.67
1189.41
176.86
1366.27
68.01
68.00
463
FLOORING
11.1
11.1.1 1:
Code
2602
2201
0367
2209
0124
0114
0115
1001
11.1
11.1.2
Code
2602
2201
0367
2209
0124
0114
0115
0101
Description
Details of cost for 10 sqm.
Materials:Bricks of class designation 75
Carriage of bricks
Cement mortar 1:4
(Rate asper item No.3.9)
Cement for slurry
Carriage of cement
Labour:Mason 2nd class
Beldar
Coolie
Bhisti
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 10 sqm.
Cost of 1 sqm.
Say
465
Quantity
Rate
Amount
1000 Nos
1000 Nos
cum
565.00
565.00
0.434
1900.00
141.88
2578.45
1073.50
80.16
1119.05
tonne
tonne
0.02
0.02
4500.00
47.29
90.00
0.95
Day
Day
Day
Day
1.08
0.25
1.62
0.27
141.60
135.25
135.25
138.45
152.93
33.81
219.10
37.38
2806.88
28.07
2834.95
425.24
3 260.19
326.02
326.00
Quantity
Rate
Amount
1000 Nos
1000 Nos
cum
565.00
565.00
0.434
1900.00
141.88
1987.30
1 073.50
80.16
862.49
tonne
tonne
0.02
0.02
4500.00
47.29
90.00
0.95
Day
Day
Day
Day
1.08
0.25
1.62
0.27
141.60
135.25
135.25
138.45
152.93
33.81
219.10
37.38
2550.32
25.50
2 575.82
386.37
2962.19
296.22
296.20
11.2
Code
Description
Details of cost for 10 sqm.
Materials:Bricks of class designation 75
Carriage of bricks
Fine sand
Carriage of fine sand
Mud Mortar
(Rate as per item No. 3.18)
Labour:Mason 2nd class
Coolie
Bhisti
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 10 sqm.
Cost of 1 sqm.
Say
2602
2201
0983
0124
0115
0101
11.3
11.3.1
Code
0295
0297
2202
0982
2203
0367
2209
0124
0114
0101
0127
0002
9999
466
Quantity
Rate
Amount
1000 Nos
1000 Nos
cum
cum
cum
645.00
645.00
0.15
0.15
0.15
1900.00
141.88
320.00
53.21
156.85
1225.50
91.51
48.00
7.98
2.53
Day
Day
Day
0.90
1.98
0.05
141.60
135.25
138.25
127.44
267.80
6.92
1798.68
17.99
1816.67
272.50
2089.17
208.92
208.90
tone aggregate.
Unit
Quantity
Rate
Amount
cum
cum
cum
cum
cum
tonne
tonne
0.27
0.09
0.36
0.18
0.18
0.17
0.17
700.00
700.00
53.21
600.00
53.21
4500.00
47.29
186.90
62.30
18.94
106.80
9.47
765.00
8.04
Day
Day
Day
Day
Day
L.S.
0.80
1.40
1.04
0.03
0.03
40.43
141.60
135.25
138.45
151.50
400.00
1.00
113.28
189.35
143.99
4.54
12.00
40.43
1661.04
16.61
1677.65
251.65
1929.30
192.93
192.95
11.4
Code
Description
Details of cost for 10 sqm.
Materials:20mm ballast
10mm ballast
Carriage of stone ballast
Coarse sand
Carriage of coarse sand
Stone aggregate 6mm
Carriage of stone ballast aggregate 6mm
Cement
Cement for slurry
Carriage of cement
Hardening compound
Carriage of hard crete
Laboun
Mason 2nd class
Beldar
Coolie
Bhisti
Sundries
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 10 sqm.
Cost of 1 sqm.
Say
0295
0297
2202
0982
2203
0298
2202
0367
0367
2209
7954
9999
0124
0114
0115
0101
9999
11.5
Code
Description
Details of cost for 10 sqm.
Materials:20mm ballast
10mm ballast
Carriage of ballast
Coarse sand
Carriage of sand
Stone aggregate 6mm
Carriage of stone aggregate
Cement
0295
0297
2202
0982
2203
0298
2202
0367
467
Quantity
Rate
Amount
cum
cum
cum
cum
cum
cum
cum
tonne
tonne
tonne
liter
L.S.
0.267
0.089
0.356
0.178
0.178
0.115
0.115
0.211
0.02
0.231
2.44
2.73
700.00
700.00
53.21
600.00
53.21
750.00
53.21
4500.00
4500.00
47.29
29.00
1.00
186.90
62.30
18.94
106.80
9.47
86.25
6.12
949.50
90.00
10.92
70.76
2.73
Day
Day
Day
Day
L.S.
2.15
1.60
1.88
0.27
53.82
141.60
135.25
135.25
138.45
1.00
304.44
216.40
254.27
37.38
53.82
2467.00
24.67
2491.67
373.75
2865.42
286.54
286.55
Quantity
Rate
Amount
cum
cum
cum
cum
cum
cum
cum
tonne
0.334
0.111
0.445
0.222
0.222
0.115
0.115
0.243
700.00
700.00
53.21
600.00
53.21
750.00
53.21
4500.00
233.80
77.70
23.68
133.20
11.81
86.25
6.12
1093.50
Code
0367
2209
7254
9999
0124
0114
0115
0101
9999
11.6
11.6.1
Code
0367
2209
0124
0115
0101
9999
Description
Cement for slurry
Carriage of cement
Hardening compound
Carriage of handening compound
Labour
Mason 2nd class
Beldar
Coolie
Bhisti
Sundries
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 10 sqm.
Cost of 1 sqm.
Say
11.7
Code
Description
Details of cost for one cum.
Materials:(A) Cement concrete 1:2:4 (Rate as per item
No. 4.2.3)
Extra labour for laying in floors etc.
Mason 2nd class
0124
468
Unit
tonne
tonne
litre
L.S.
Quantity
0.02
0.263
2.44
2.73
Rate
4500.00
47.29
29.00
1.00
Amount
90.00
12.44
70.76
2.73
Day
Day
Day
Day
L.S.
2.15
1.86
1.88
0.27
53.82
141.60
135.25
135.25
138.45
1.00
304.44
251.57
254.27
37.38
53.82
2743.47
27.43
2770.90
415.64
3186.54
318.65
318.65
Quantity
Rate
Amount
cum
0.235
3169.00
744.86
tonne
tonne
0.02
0.02
4500.00
47.29
90.00
0.95
Day
Day
Day
L.S.
1.88
1.88
0.54
19.76
141.60
135.25
138.45
1.00
266.21
254.27
74.76
19.76
1450.81
14.51
1465.32
219.80
1685.12
168.51
168.50
Quantity
Rate
Amount
cum
1.00
3 579.10
3579.10
Day
0.35
141.60
49.56
Code
0114
0101
9999
Description
Beldar
Bhisti
Sundries
TOTAL
Add for water charges @1% on all except A
TOTAL
Add for contractors profit and overheads @
15% on all except A
Cost of 1 Cum.
Say
11.8
Code
Description
Details of cost for 10 sqm.
Labour:Mason 2nd class
Beldar
Chequered plate etc.
TOTAL
Add 1% for water charges
TOTAL
Add 15% contractors profit and overheads
Cost of 10 sqm.
Cost of 1 sqm.
Say
0124
0114
9999
11.9
11.9.1
Code
0296
0297
2202
0982
2203
0367
0367
2209
0785
2268
469
Unit
Day
Day
L.S.
Quantity
0.18
0.05
19.76
Rate
135.25
138.45
1.00
Amount
24.34
6.92
19.76
3 679.68
1.01
3 680.69
15.24
3 695.93
3 695.95
Quantity
Rate
Amount
Day
Day
L.S.
0.36
0.36
13.52
141.60
135.25
1.00
50.98
48.69
13.52
113.19
1.13
114.32
17.15
131.47
13.15
13.15
Unit
Quantity
Rate
Amount
cum
0.227
700.00
158.90
cum
0.076
700.00
53.20
cum
0.303
53.21
16.12
cum
cum
tonne
tonne
tonne
0.151
0.151
0.109
0.02
0.129
600.00
53.21
4500.00
4500.00
47.29
90.60
8.03
490.50
90.00
6.10
quintal
cum
0.872
0.051
115.00
53.21
100.28
2.71
Code
0367
2209
0784
0874
9999
0124
0114
0101
0139
0127
0002
0013
9999
11.9
11.9.2
Code
0875
0874
0368
0367
Description
Portland Cement
Carriage of white Cement
Marble powder
Dark shade pigmeny/3.5kg/ 50kg of cement
= 40.5x3.5/50=2.84kg.
Carriage of pigment & marble powder etc.
Labour:Mason 2nd class
Beldar
Bhisti
Skilled Beldar (for floor rubbing etc.)
Mixer operator
Mixer
Machine for rubbing of floors
Sundries
Total
Add for water charges @ 1% on A
Total
Add for contractors profit and overheads @
15% on A+B
Cost of 10 sqm
Cost of 1 sqm
Say
470
Unit
tonne
tonne
cum
kilogram
Quantity
0.0405
0.0405
0.007
2.84
Rate
4,500.00
47.29
800.00
42.00
Amount
182.25
1.92
5.60
119.28
L.S.
3.64
1.00
3.64
Day
Day
Day
Day
Day
Day
Day
L.S.
1.79
1.99
1.04
1.00
0.03
0.03
1.60
161.46
141.60
135.25
138.45
138.45
151.50
400.00
200.00
1.00
253.46
269.15
143.99
138.45
4.54
12.00
320.00
161.46
2,632.18
26.32
2,658.50
398.78
3,057.28
305.73
305.75
Unit
Quantity
Rate
Amount
sqm
10.00
305.75
3,057.50
kilogram
kilogram
2.84
2.84
65.00
42.00
184.60
(-)119.28
tonne
tonne
0.0405
0.0405
9,700.00
4,500.00
392.85
(-)182.25
3,333.62
2.76
3,336.38
41.39
3,377.77
337.78
337.80
11.9
11.9.3
Code
0876
0874
0368
0367
11.9
11.9.4
Code
0296
0297
2202
0982
2203
0367
0367
2209
471
Quantity
Rate
Amount
sqm
10.00
305.75
3057.50
kilogram
kilogram
2.84
2.84
45.00
42.00
127.80
(-) 119.28
tonne
tonne
0.0203
0.0203
9700.00
4500.00
196.91
(-) 91.35
3592.84
1.14
3058.64
17.28
3075.92
307.59
307.60
Unit
Quantity
Rate
Amount
cum
0.227
700.00
158.90
cum
0.076
700.00
53.20
cum
0.303
53.21
16.12
cum
cum
tonne
tonne
tonne
0.151
0.151
0.109
0.02
0.129
600.00
53.21
4500.00
4500.00
47.29
90.60
8.03
490.50
90.00
6.10
Code
0785
2268
0368
2209
0784
0124
0114
0101
0139
0127
0002
0013
9999
11.9
11.9.5
Code
0875
Description
For top layer 6mm thick
Marble chips
Carriage of Marble chips
White Cement
Carriage of white Cement
Marble powder
Labour:Mason 2nd class
Beldar
Bhisti
Skilled Beldar (for floor rubbing etc.)
Mixer operator
Mixer
Machine for rubbing of floors
Sundries
Total
Add for water charges @ 1 %
Total
Add for contractors profit and overheads @)15%
Cost of 10 sqm
Cost of 1 sqm
Say
472
Unit
Quantity
Rate
Amount
quintal
cum
tonne
tonne
cum
0.958
0.056
0.0405
0.0405
0.007
115.00
53.21
9700.00
47.29
800.00
110.17
2.98
392.85
1.92
5.60
Day
Day
Day
Day
Day
Day
Day
L.S.
1.79
1.99
1.04
1.00
0.03
0.03
1.60
161.46
141.60
135.25
138.45
138.45
151.50
400.00
200.00
1.00
253.46
269.15
143.99
138.45
4.54
12.00
320.00
161.46
2 730.02
27.30
2 757.32
413.60
3 170.92
317.09
317.10
Unit
Quantity
Rate
Amount
sqm
10.00
305.75
3057.50
kilogram
kilogram
2.84
2.84
65.00
42.00
184.60
(-) 119.28
3122.82
0.65
3123.47
9.90
3133.37
313.33
313.35
11.9
11.9.6
Code
0874
9999
11.10
11.10.1
Code
0296
0297
2202
0982
2203
0367
0367
2209
0788
2268
0367
2209
0784
473
Quantity
Rate
Amount
sqm
10.00
305.75
3057.50
kilogram
L.S.
2.84
7.38
42.00
1.00
-119.28
-7.38
2930.84
-1.27
2929.57
-19.19
2910.38
291.04
291.05
cement.
Unit
Quantity
Rate
Amount
cum
0.21
700.00
147.00
cum
0.07
700.00
49.00
cum
0.28
53.21
14.90
cum
cum
tonne
tonne
tonne
0.14
0.14
0.1005
0.02
0.1205
600.00
53.21
4 500.00
4 500.00
47.29
84.00
7.45
452.25
90.00
5.70
quintal
1.40
1115.00
161.00
cum
tonne
tonne
cum
0.082
0.0578
0.0578
0.012
53.21
4 500.00
47.29
800.00
4.36
260.10
2.73
9.60
Code
0874
9999
0124
0114
0101
0139
0127
0002
0013
9999
11.10
11.10.2
Code
0875
0874
0368
0367
Description
Dark shade pigment 3.5kg/ 50kg of cement
= 57.80x3.5/50=4.05kg.
Carriage of pigment & marble powder etc.
LabourMason 2nd class
Beldar
Bhisti
Skilled Beldar (for floor rubbing etc.)
Mixer operator
Mixer
Machine for rubbing of floors
Sundries
Total
Add for water charges @ 1%
Total
Add for contractors profit and overheads @
15%
Cost of 10 sqm
Cost of 1 sqm
Say
474
Unit
Quantity
Rate
Amount
kilogram
4.05
42.00
170.01
L.S.
5.46
1.00
5.46
Day
Day
Day
Day
Day
Day
Day
L.S.
1.79
1.99
1.04
1.00
0.03
0.03
1.60
134.55
141.60
135.25
138.45
138.45
151.50
400.00
200.00
1.00
253.46
269.15
143.99
138.45
4.54
12.00
320.00
134.55
2613.79
26.14
2639.93
395.99
3035.92
303.59
303.60
Unit
Quantity
Rate
Amount
sqm
10.00
303.60
3036.00
kilogram
kilogram
4.05
4.05
65.00
42.00
263.25
(-)170.10
tonne
tonne
0.0578
0.0578
9 700.00
4 500.00
560.66
(-) 260.10
3429.71
3.94
3433.65
59.06
3492.71
349.27
349.25
11.10
11.10.3
Code
Discription
0876
0874
0368
0367
11.10
11.10.4
Code
0296
0297
2202
0982
2203
0367
0367
Discription
Details of cost for 10 sqm
Materials
For under layer of 31mm thick
Stone Aggregate (Single size): 12.5 mm
nominal size
Stone Aggregate (Single size): 10 mm
nominal size
Carriage of Stone aggregate below 40 mm
nominal size
Coarse sand (zone III)
Carriage of Coarse sand
Cement
Cement for slurry
475
Quantity
Rate
Amount
sqm
10.00
303.60
3036.00
kilogram
kilogram
4.05
4.05
45.00
42.00
182.25
(-)170.10
tonne
tonne
0.0289 9700.00
0.0289 4500.00
280.33
(-)130.05
3198.43
1.62
3200.05
24.61
3224.66
322.47
322.45
Unit
Quantity
Rate
Amount
cum
0.21
700.00
147.00
cum
0.07
700.00
49.00
cum
0.28
53.21
14.90
cum
cum
tonne
tonne
0.14
0.14
0.02
600.00
53.21
0.1005 4500.00
4500.00
84.00
7.45
452.25
90.00
nd : 4 graded
Code
2209
0788
2268
0368
2209
0784
0124
0114
0101
0139
0127
0002
0013
9999
11.10
11.10.5
Code
0875
0847
Description
Carriage of Cement
For top layer 9mm thick
Marble chips large size above 4 mm
White &
black
Carriage of Marble chips
White Cement
Carriage of white Cement
Marble powder
Labour:Mason 2nd class
Beldar
Bhisti
Skilled Beldar (for floor rubbing etc.)
Mixer operator
Mixer
Machine for rubbing of floors
Sundries
Total
Add for water charges @ 1%
Total Add for contractors profit
andoverheads @ 15%
Cost of 10 sqm
Cost of 1 sqm
Say
476
Unit
tonne
Quantity
0.1205
Rate
47.29
Amount
5.70
quintal
1.40
115.00
161.00
cum
tonne
tonne
cum
0.082
0.0578
0.0578
0.012
53.21
9700.00
47.29
800.00
4.36
560.66
2.73
9.60
Day
Day
Day
Day
Day
Day
Day
L.S.
1.79
1.99
1.04
1.00
0.03
0.03
1.60
161.46
141.60
135.25
138.45
138.45
151.50
400.00
200.00
1.00
253.46
269.15
143.99
138.45
4.54
12.00
320.00
161.46
2 891.70
28.92
2 920.62
438.09
3 358.71
335.87
335.85
y cement.
Unit
Quantity
Rate
Amount
sqm
10.00
303.60
3036.00
kilogram
kilogram
2.84
2.84
65.00
42.00
184.60
(-)119.28
3101.32
0.65
3101.97
9.90
3111.87
311.19
311.20
11.10
11.10.6
Code
0296
0297
2202
0982
0367
0367
2203
2209
0788
0368
0784
0124
0114
0101
0139
0127
0002
0013
2268
2209
9999
Discription
Details of cost for 10 sqm
Materials
For under layer 31mm thick
Stone Aggregate (Single size): 12.5 mm
nominal size
Stone Aggregate (Single size): 10 mm
nominal size
Carriage of Stone aggregate below 40 mm
nominal size
Coarse sand (zone III)
Carriage of Coarse sand
Cement
Cement for slurry
Carriage of Cement
For top layer 9mm thick
Marble chips large size above 4 mm White &
black
Carriage of Marble chips
White Cement
Carriage of White Cement
Marble powder
Labour:Mason 2nd class
Beldar
Bhisti
Skilled Beldar (for floor rubbing etc.)
Mixer operator
Mixer
Machine for rubbing of floors
Sundries
Total
Add for water charges @ 1 %
Total
Add for contractors profit and overheads @ 15%
Cost of 10 sqm
Cost of 1 sqm
Say
477
Quantity
Rate
Amount
cum
0.21
700.00
147.00
cum
0.07
700.00
49.00
cum
0.28
53.21
14.90
cum
cum
tonne
tonne
tonne
0.14
0.14
0.1005
0.02
0.1205
600.00
53.21
4500.00
4500.00
47.29
84.00
7.45
452.25
90.00
5.70
quintal
1.41
115.00
161.00
cum
tonne
tonne
cum
0.082
0.0578
0.0578
0.012
53.21
9700.00
47.29
800.00
Day
Day
Day
Day
Day
Day
Day
L.S.
1.79
1.99
1.04
1.00
0.03
0.03
1.60
141.60
135.25
138.45
138.45
151.50
400.00
200.00
1.00
4.36
560.66
2.73
9.60
253.46
269.15
143.99
138.45
4.54
12.00
320.00
134.55
2564.23
25.64
2589.87
38.48
2978.35
297.84
297.85
478
11.11.1
Code
Discription
11.11
0296
0297
2202
0982
2203
0367
0367
2209
0788
2268
0368
2209
0784
0874
9999
0124
0114
0101
0139
0127
0002
0013
9999
Unit
cum
cum
cum
cum
cum
tonne
tonne
tonne
quintal
cum
tonne
tonne
cum
kilogram
L.S
Day
Day
Day
Day
Day
Day
Day
L.S.
0.19
0.06
0.25
0.125
0.125
0.0897
0.02
0.1097
1.734
0.102
0.081
0.081
0.017
5.67
6.24
1.79
1.99
1.04
1.00
0.03
0.03
1.60
156.13
Rate
Amount
700.00
700.00
53.21
600.00
53.21
4500.00
4500.00
47.29
133.00
42.00
13.30
75.00
6.65
403.65
90.00
5.19
115.00
53.21
9700.00
47.29
800.00
42.00
199.41
5.43
364.50
3.83
13.60
238.14
1.00
6.24
141.60
135.25
138.45
138.45
253.46
269.15
143.99
138.45
151.50
400.00
200.00
1.00
2897.66
4.54
12.00
320.00
156.13
2926.64
3365.64
28.98
439.00
336.56
336.55
11.11
11.11.2
Code
0875
0874
0368
0367
11.11
11.11.3
Code
0876
0874
0368
0367
Discription
Discription
Details of cost for 10 sqm.
(A) Cost same as per item No 11.11.1
Add difference of cost due to using Medium
shade pigment instead of dark shade pigment
Add for Medium shade pigment
Deduct for Dark shade pigment
Add Difference of cost due to using white
cement instead of grey cement
Add for White cement
Deduct for Grey cement
TOTAL
(B) Add 1% for water charges except on A
TOTAL
Add 15% for contractors profit and
overheads
except on A
Cost of 10 sqm.
Cost of 1 sqm.
Say
479
Quantity
Rate
Amount
sqm
10.00
336.55
3 365.50
kilogram
kilogram
5.67
5.67
65.00
42.00
368.55
(-)238.14
tonne
tonne
0.081
0.081
9700.00
4500.00
785.70
(-)364.50
3917.11
5.52
3922.63
83.574006.20
400.62
400.60
Quantity
Rate
Amount
sqm
10.00
336.55
3 365.50
kilogram
kilogram
5.67
5.67
45.00
42.00
255.15
(-)238.14
tonne
tonne
0.0405
0.0405
9700.00
4500.00
392.85
(-)182.25
3 593.11
2.28
3 595.39
34.48
3 629.87
362.99
363.00
11.11
11.11.4
Code
0296
0297
2202
0982
2203
0367
0367
2209
0788
2268
0368
2209
0784
0124
0114
0101
0139
0127
0002
0013
9999
11.11
11.11.5
Discription
Details of cost for 10 sqm.
MaterialsFor under layer of 128mm thick
12.5mm stone aggregate
10mm stone aggregate
Carriage of stone aggregate
Coarse sand
Carriage of coarse sand
Cement
Cement for slurry
Carriage of cement
For top layer 12mm thick
Marble chips 7mm to 10mm size
Carriage of marble chips
Cement
Carriage of cement
Marble powder
Labour:Mason 2nd class
Beldar
Bhisti
Beldar for rubbing and polishing (Special
Rate)
Mixer operator
Mixer
Machine
Sundries
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 10 sqm.
Cost of 1 sqm.
Say
Code
(A)
Discription
Details of cost for 10 sqm.
Cost same as per item No 11.11.1
Add difference of cost due to using Light
480
Quantity
Rate
Amount
cum
cum
cum
cum
cum
tonne
tonne
tonne
0.19
0.06
0.25
0.125
0.125
0.0897
0.02
0.1097
700.00
700.00
53.21
600.00
53.21
4500.00
4500.00
47.29
133.00
42.00
13.30
75.00
6.65
403.65
90.00
5.19
quintal
cum
tonne
tonne
cum
1.916
0.1128
0.081
0.081
0.017
115.00
53.21
9700.00
47.29
800.00
220.34
6.00
785.70
3.83
13.60
Day
Day
Day
Day
1.79
1.99
1.04
1.00
141.60
135.25
138.45
138.45
253.46
269.15
143.99
138.45
Day
Day
Day
L.S.
0.03
0.03
1.60
134.55
151.50
400.00
200.00
1.00
4.54
12.00
320.00
134.55
3074.40
30.74
3105.14
465.77
3570.91
357.09
357.10
Unit
Quantity
Rate
Amount
sqm
10.00
336.55
3 365.5
Code
0876
0874
11.11
11.11.6
Code
0296
0297
2202
0982
2203
0367
0367
2209
0788
2268
0368
2209
0784
0124
0114
0101
0139
0127
0002
0013
9999
Description
shade pigment instead of dark shade
pigment
Add for Light shade pigment
Deduct for Dark shade pigment
TOTAL
Add 1% for water charges except on A
TOTAL 15
Add 15% for contractors profit and
overheads
except on A
Cost of 10 sqm.
Cost of 1 sqm.
Say
Discription
Details of cost for 10 sqm.
MaterialsFor under layer 28mm thick
12.5mm stone aggregate
10mm stone aggregate
Carriage of stone aggregate
Coarse sand
Carriage of coarse sand
Cement
Cement for slurry
Carriage of cement
For top layer 12mm thick
Marble chips 7mm to 10mm size
Carriage of marble chips
Cement
Carriage of cement
Marble powder
Labour:Mason 2nd class
Beldar
Bhisti
Beldar for rubbing and polishing (Special
Rate)
Mixer operator
Mixer
Machine
Sundries
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 10 sqm.
Cost of 1 sqm.
Say
481
Unit
Quantity
Rate
Amount
kilogram
kilogram
5.67
5.67
65.00
42.00
368.55
(-)238.14
3495.91
1.30
3497.21
19.76
3516.97
351.70
351.70
Quantity
Rate
Amount
cum
cum
cum
cum
cum
tonne
tonne
tonne
0.19
0.06
0.25
0.125
0.125
0.0897
0.02
0.1097
700.00
700.00
53.21
600.00
53.21
4500.00
4500.00
47.29
133.00
42.00
13.30
75.00
6.65
403.65
90.00
5.19
quintal
cum
tonne
tonne
cum
1.916
0.1128
0.081
0.081
0.017
115.00
53.21
4500.00
47.29
800.00
220.34
6.00
364.50
3.83
13.60
Day
Day
Day
Day
1.79
1.99
1.04
1.00
141.60
135.25
138.45
138.45
253.46
269.15
143.99
138.45
Day
Day
Day
L.S.
0.03
0.03
1.60
134.55
151.50
400.00
200.00
1.00
4.54
12.00
320.00
134.55
2653.20
26.53
2679.73
401.96
3081.69
308.17
308.15
11.12
11.12.1
11.12.1.1
Code
0785
2268
0367
2209
0784
0874
9999
0124
0114
0101
0139
9999
11.12
11.12.1
11.12.1.2
Code
0875
0874
482
cement.
Unit
Quantity
Rate
Amount
cum
0.174
3169.60
551.51
quintal
cum
tonne
tonne
cum
kilogram
0.872
0.051
0.0405
0.0405
0.007
2.84
115.00
53.21
4500.00
47.29
800.00
42.00
100.28
2.71
182.25
1.92
5.60
119.28
L.S.
3.64
1.00
3.64
Day
Day
Day
Day
3.00
3.00
1.00
7.00
141.60
135.25
138.45
138.45
424.80
405.75
138.45
969.15
L.S.
201.89
1.00
201.89
3107.23
31.07
3138.30
470.74
3 609.04
360.90
360.90
Unit
Quantity
Rate
Amount
cum
10.00
360.90
3 609.00
kilogram
kilogram
2.84
2.84
65.00
42.00
184.60
(-)119.28
Code
0368
0367
11.12
11.12.1
11.12.1.2
Code
0876
0874
0368
0367
Description
Add Difference of cost due to using white
cement instead of grey cement
Add for White cement
Deduct for Grey cement
TOTAL
Add 1 % for water charges except on A
TOTAL
Add 10% for contractors profit and overheads
except on A
Cost of 15%
Cost of 1 sqm.
Say
Discription
483
Unit
Quantity
Rate
Amount
tonne
tonne
0.0405
0.0405
9 700.00
4 500.00
392.85
(-)182.25
3884.92
2.76
3887.68
41.80
3929.48
392.95
392.95
Unit
Quantity
Rate
Amount
cum
10
360.90
3 609.00
kilogram
kilogram
2.84
2.84
45.00
42.00
127.80
(-)119.28
tonne
tonne
0.0203
0.0203
9700.00
4500.00
196.91
(-)91.35
3723.08
1.14
3724.22
17.28
3741.50
374.15
374.15
11.12
11.12.1
11.12.1.4
Code
0785
2268
0368
2209
0784
0124
0114
0101
0139
9999
11.12
11.12.1
11.12.1.5
Code
0875
0874
Say
484
Unit
Quantity
Rate
Amount
cum
0.174
3169.60
551.51
quintal
cum
tonne
tonne
cum
0.958
0.056
0.0405
0.0405
0.007
115.00
53.21
9 700.00
47.29
800.00
110.17
2.98
392.85
1.92
5.60
Day
Day
Day
Day
3.00
3.00
1.00
7.00
141.60
135.25
138.45
138.45
424.80
405.75
138.45
969.15
L.S
201.89
1.00
201.89
3 205.07
32.05
3 237.12
485.57
3 722.69
372.27
372.25
y cement.
Unit
Quantity
Rate
Amount
sqm
10.00
360.90
3 609.00
kilogram
L.S.
2.84
2.84
65.00
42.00
184.60
(-)119.28
3674.32
0.65
3674.97
9.90
3684.87
368.49
368.50
11.12
11.12.1
11.12.1.6
Code
0874
9999
11.12
11.13.1
Code
1149
9999
0124
0114
9999
Discription
Details of cost for 10 sqm.
(A) Cost same as per item No. 11.12.1.1
Less cost of dark shade pigment
Deduct for dark shade pigment
Deduct for Carriage of pigment
TOTAL
Add 1% for water charges except on A
TOTAL
Add 15% for contractors profit and overheads
except on A
Cost of 15% sqm
Cost of 1 sqm.
Say
11.14
Code
Discription
Details of cost for 10 sqm.
LabourMason 2nd class
Beldar
Coolie
TOTAL
Add 1 % for water charges
0124
0114
0115
485
Unit
Quantity
Rate
Amount
sqm
10.00
360.90
3 609.00
kilogram
L.S.
2.84
7.38
42.00
1.00
(-)119.28
7.38
3482.34
1.27
3481.07
19.19
3461.88
346.19
346.20
Quantity
Rate
Amount
metre
L.S
11.00
2.73
6.00
1.00
66.00
2.73
Day
Day
L.S
0.25
0.25
13.52
141.60
135.25
1.00
35.40
33.81
13.52
151.46
1.51
152.97
22.95
175.92
17.59
17.60
Quantity
Rate
Amount
Day
Day
Day
0.30
0.30
0.30
141.60
135.25
135.25
42.48
40.57
40.57
123.62
1.24
Code
Description
TOTAL
Add 15% for contractors profit and overheads
Cost of 10 Sqm.
Cost of 1sqm,
Say
11.15
11.15.1
Code
0367
2209
0114
2710
0368
0784
0875
0785
2268
2209
9999
2216
0123
0114
0115
0139
9999
0101
0013
Crazy marble stone flooring including filling the gaps with ligh
cement marble powder mixture (3 parts of white cement : 1 p
weight in proportion of 4:7 (4 cement marble powder mix : 7 w
black marble chips of sizes from 1mm to 4mm nominal size by
25mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand
12.5 mm nominal size) rubbing, polishing and ceme-nt slurry
Discription
Details of cost for 10 sqm.
Under layer 25mm thick of cement
(A) Concrete 1:2:4 -10x0.025=0.25 cum
(Rate same as in item no. 11.7)
Cement slurry for subgrade and under large cement
Carriage of cement
Labour for applying cement slurry
Beldar
Top layer with marble pieces and gap filling
with marble powder mixture
Marble pieces for crazy flooring
(Assume 70% of marble stone are and 30% of
joint filer/mixture
7sqmx0.02m = 0.14 cum
0.872x0.14/0.051 = 2.40q
White cement
Marble powder
Light shade pigment @ 3.5kg/50kg of cement
= 40.5x3.5/50=2.84kg
Marble chips
Carriage of marble chips
Carriage of cement
Carriage of pigment & marble powder
Carriage of marble stone pieces
Labour for finishing, polishing and fixingMason 1st class
Beldar
Coolie
Beldar for rubbing and polishing (Special
Rate)
Sundries including carborandum etc.
Bhisti
Machine
TOTAL
Add for water charges @ 1% on all except (A)
TOTAL
Add for contractors profit and overheads @
15% on all except (A)
Cost of lOSqm.
Cost of lsqm.
Say
486
Unit
Quantity
Rate
Amount
124.86
18.73
143.59
14.36
14.35
Quantity
Rate
Amount
cum
0.25
3695.95
923.99
tonne
tonne
0.04
0.04
4500.00
47.29
180.00
1.89
Day
0.50
135.25
67.62
quintal
tonne
cum
kilogram
2.40
0.04
0.01
2.84
105.00
9700.00
800.00
65.00
252.00
392.85
5.60
184.60
quintal
cum
tonne
L.S.
tonne
0.87
0.05
0.04
3.64
0.24
115.00
53.21
47.29
1.00
47.29
100.28
2.71
1.92
3.64
11.35
Day
Day
Day
Day
1.20
1.00
1.00
5.00
151.50
135.25
135.25
138.45
181.80
135.25
135.25
692.25
L.S.
Day
Day
134.55
0.54
4.00
1.00
138.45
200.00
134.55
74.76
800.00
4 282.31
33.58
4 315.89
508.78
4 824.67
482.47
482.45
11.16
11.16.1
Code
1201
9999
0367
0367
0368
2209
0875
0124
0115
0139
0101
0013
9999
11.16
11.16.2
Code
1202
9999
0367
0368
2209
0876
0124
0115
0139
487
Quantity
Rate
Amount
sqm
L.S
cum
11.00
40.43
0.224
198.00
1.00
2578.45
2178.00
40.43
577.57
tonne
tonne
tonne
kilogram
0.044
0.044
0.088
3.08
4500.00
9700.00
47.29
65.00
198.00
426.80
4.16
200.20
Day
Day
Day
1.60
2.00
1.00
141.60
135.25
138.45
226.56
270.50
138.45
Day
Day
L.S
1.00
1.60
161.98
138.45
200.00
1.00
138.45
320.00
161.98
4881.10
48.81
4 929.91
739.49
5 669.40
566.94
566.95
Quantity
Rate
Amount
sqm
L.S
tonne
11.00
40.43
0.22
175.00
1.00
2578.45
1 925.00
40.43
577.57
tonne
tonne
tonne
kilogram
0.07
0.02
0.09
3.08
4500.00
9700.00
47.29
45.00
297.00
213.40
4.16
138.60
Day
Day
Day
1.60
2.00
1.00
141.60
135.25
138.45
226.56
270.50
138.45
Code
0101
0013
9999
Description
Rate)
Bhisti
Machine
Sundries including carborandum stone etc.
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 10 sqm.
Cost of 1 sqm.
Say
11.16.3
Code
Discription
11.16
1203
9999
0367
2209
0874
0124
0115
0139
0101
0013
9999
488
Unit
Quantity
Rate
Amount
Day
Day
L.S
1.00
1.60
161.98
138.45
200.00
1.00
138.45
320.00
161.98
4452.10
44.52
4496.62
674.49
5171.11
517.11
517.10
Quantity
Rate
Amount
sqm
L.S
cum
170.00
1.00
2578.45
170.00
1.00
2578.45
1870.00
40.43
577.57
tonne
tonne
kilogram
0.088
0.088
3.08
4 500.00
47.29
42.00
396.00
4.16
129.36
Day
Day
Day
1.60
2.00
1.00
141.60
135.25
138.45
226.56
270.50
138.45
Day
Day
L.S
1.00
1.60
161.98
138.45
200.00
1.00
138.45
320.00
161.98
4273.46
42.73
4316.19
647.43
4963.62
496.36
496.35
11.16
11.16.4
Code
1203
9999
0367
2209
0874
0124
0115
0139
0101
0013
9999
0874
11.17
Code
0124
0115
0139
489
Quantity
Rate
Amount
sqm
L.S.
11.00
40.43
170.00
1.00
1870.00
40.43
cum
0.22
2578.45
577.57
tonne
tonne
kilogram
0.088
0.088
3.08
4500.00
47.29
42.00
396.00
4.16
129.36
Day
Day
Day
1.60
2.00
1.00
141.60
135.25
138.45
226.56
270.50
138.45
Day
Day
L.S.
kilogram
1.00
1.60
161.98
5.92
138.45
200.00
1.00
42.00
138.45
320.00
161.98
-248.64
4 024.82
40.25
4065.07
609.76
4674.83
467.48
467.50
Quantity
Rate
Amount
Day
Day
Day
0.22
0.22
0.65
141.60
135.25
138.45
31.15
29.76
89.99
150.90
1.51
152.41
22.86
175.27
17.53
17.55
11.18
11.18.1
Code
1201
9999
0368
2209
0875
0124
0115
0139
9999
11.18
11.18.2
Code
1202
9999
0368
0367
2209
0876
0124
Description
Details of cost for 10 sqm.
MaterialsTerrazo tiles including 10% wastage
Carriage of tiles
Cement mortar 1 :3 (1Cement: 3 Coarse sand)
Rate as per item No. 3.8
White cement tor slurry
For buttering tiles bed sides =44 kg. + For
grouting =22 kg. Total = 66 kg.
Carriage of cement
Light shade pigment 66x3.5/50 = 4.62
LabourMason 2nd class
Coolie
Beldar for rubbing and polishing (Special
Rate)
Sundries including carborandum stone and
polishing powder etc.
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 10 sqm.
Cost of 1 sqm.
Say
Description
Details of cost for 10 sqm.
Materials20mm thick terrazo tiles (medium shades)
including wastage & breakage
Carriage of tiles
Cement mortar 1:3(1 Cement: 3 Coarse sand)
Rate as per item no. 3.8
50% white cement for slurry
50% grey cement for slurry
Carriage of cement
Medium shade pigment
LabourMason 2nd class
490
Unit
Quantity
Rate
Amount
sqm
L.S.
cum
11.00
40.43
0.144
198.00
1.00
3169.60
2178.00
40.43
456.42
cum
tonne
0.144
0.066
9700.00
640.20
tonne
kilogram
0.066
4.62
47.29
65.00
3.12
300.30
Day
Day
Day
3.25
3.25
7.60
141.60
135.25
138.45
460.20
439.56
1052.22
L.S.
161.46
1.00
161.46
5731.91
57.32
5789.23
868.38
6657.61
665.76
665.75
Quantity
Rate
Amount
sqm
11.00
175.00
1925.00
L.S.
cum
40.43
0.144
1.00
3169.60
40.43
456.42
tonne
tonne
tonne
Kilogram
0.033
0.033
0.066
4.62
9700.00
4500.00
47.29
45.00
320.10
148.50
3.12
207.90
Day
3.25
141.60
460.20
Code
0115
0139
9999
11.18
11.18.3
Code
1203
9999
0367
2209
0874
0124
0115
0139
9999
11.18
11.18.4
Code
1203
Description
Coolie
Beldar for rubbing and polishing (Special
Rate)
Sundries including carborandum stone and
polishing powder etc.
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 10 sqm.
Cost of 1 sqm.
Say
Description
Details of cost for 10sqm.
Materials20mm thick terrazo tiles (dark shades)
including wastage & breakage
Carriage of tiles
Cement mortar. 1:3 (1 Cement: 3 Coarse sand)
Rate as per item No. 3.8
Grey cement for slurry
Carriage of cement
Dark shade pigment
LabourMason 2nd class
Coolie
Beldar for rubbing and polishing (Special
Rate)
Sundries including carborandum stone and
polishing powder etc.
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 10 sqm.
Cost of 1 sqm.
Say
491
Unit
Day
Day
Quantity
3.25
7.60
Rate
135.25
138.45
Amount
439.55
1052.22
L.S.
161.46
1.00
161.46
5214.91
52.15
5267.06
790.06
6057.12
605.71
605.70
Quantity
Rate
Amount
sqm
11.00
170.00
1870.00
L.S.
cum
15.55
0.144
1.00
3169.60
40.43
456.42
tonne
tonne
kilogram
0.066
0.066
4.62
4500.00
47.29
42.00
297.00
3.12
194.04
Day
Day
Day
3.25
3.25
7.60
141.60
135.25
138.45
460.20
439.56
1 052.22
L.S.
161.46
1.00
161.46
4 974.45
49.74
5 024.19
753.63
5 777.82
577.78
577.80
Quantity
Rate
Amount
sqm
11.00
170.00
1870.00
Code
9999
0367
2209
0874
0124
0115
0139
9999
0874
11.19
1.19.1
Code
1227
9999
0367
0368
2209
0875
0124
0115
0139
0101
0013
9999
Description
including wastage & breakage
Carriage of tiles
Cemept mortar 1:3 (1 Cement: 3 Coarse sand)
Rate as per item No. 3.8
Grey cement for sturry
Carriage of cement
Dark shade pigment
LabourMason 2nd class
Coolie
Beldar for rubbing and polishing (Special
Rate)
Sundries including carborandum stone and
polishing powder etc.
Less for dark shade pigment [3.08+2.84(for
tiles)]
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 10 sqm.
Cost of 1 sqm.
Say
Description
Details of cost for 10 sqm.
MaterialsTerrazo tiles including 10% wastage
Carriage of tiles
Cement mortar 1:4(1 Cement,; 4 Coarse sand) cum
Grey cement for slurry @ 4.4kg/sqm.
White cement for grouting
Carriage of cement
Light shade pigment
LabourMason 2nd class
Coolie
Beldar for rubbing and polishing (Special
Rate)
Bhisti
Machine
Sundries including carborandum stone etc.
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 10 sqm.
Cost of 1 sqm.
Say
492
Unit
Quantity
Rate
Amount
L.S.
cum
40.43
0.144
1.00
3169.60
40.43
456.42
tonne
tonne
kilogram
0.066
0.066
4.62
4500.00
47.29
42.00
297.00
3.12
194.04
Day
Day
Day
3.25
3.25
7.60
141.60
135.25
138.45
460.20
439.56
1052.22
L.S.
161.46
1.00
161.46
kg
5.92
42.00
-248.64
4725.81
47.26
4773.07
715.96
5489.03
548.90
548.90
Unit
Quantity
Rate
Amount
sqm
L.S.
tonne
tonne
tonne
kilogram
11.00
40.43
0.224
0.044
0.044
0.088
3.08
230.00
1.00
2578.45
4500.00
9700.00
47.29
65.00
2530.00
40.43
577.57
198.00
426.80
4.16
200.20
Day
Day
Day
1.60
2.00
1.00
141.60
135.25
138.45
226.56
270.50
138.45
Day
Day
L.S.
1.00
1.60
161.98
138.45
200.00
1.00
138.45
320.00
161.98
5 233.10
52.33
5 285.43
792.81
6 078.24
607.82
607.80
11.19
11.19.2
Code
1228
9999
0367
0368
2209
0876
0124
0115
0139
0101
0013
9999
11.19
11.19.3
Code
1229
9999
0367
2209
0874
0124
Description
Details of cost for lOsqm.
MaterialsTerrazo tiles including 10% wastage
Carriage of tiles
Cement mortar 1:4(1 Cement: 4 Coarse sand)
Rate as per item No. 3.9
Ordinary cement for (i) Cement slurry @
4.4kg/sqm = 44kg+ (ii) Grouting = 44
kg.Total = 88kg or 0.088 tonne
Ordinary cement
Carriage of cement
Dark shade pigment
Labour & sundries
Mason 2nd class
493
Quantity
Rate
Amount
sqm
L.S
11.00
40.43
200.00
1.00
2200.00
40.43
cum
0.224
2578.45
577.57
tonne
tonne
tonne
kilogram
0.066
0.022
0.088
3.08
4500.00
9700.00
47.29
45.00
297.00
213.40
4.16
138.60
Day
Day
Day
1.60
2.00
1.00
141.60
135.25
138.45
226.56
270.50
138.45
Day
Day
L.S.
1.00
1.60
161.98
138.45
200.00
1.00
138.45
320.00
161.98
4727.10
47.27
4774.37
716.16
5490.53
549.05
549.05
Unit
Quantity
Rate
Amount
sqm
L.S.
cum
11.00
40.43
0.224
170.00
1.00
2578.45
1870.00
40.43
577.57
tonne
tonne
kilogram
0.088
0.088
3.08
4500.00
47.29
42.00
396.00
4.16
129.36
Day
1.60
141.60
226.56
Code
0115
0139
0101
0013
9999
11.19
11.19.4
Code
1229
9999
0367
2209
0874
0124
0115
0139
0101
0013
9999
0874
Description
Coolie
Beldar for rubbing and polishing (Special
Rate)
Bhisti
Machine
Sundries including carborandum stone etc.
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 10 sqm.
Cost of 1 sqm.
Say
494
Unit
Day
Day
Quantity
2.00
1.00
Rate
135.25
138.45
Amount
270.50
138.45
Day
Day
L.S.
1.00
1.60
161.98
138.45
200.00
1.00
138.45
320.00
161.98
4273.46
42.73
4316.19
647.43
4963.62
496.36
496.35
Unit
Quantity
Rate
Amount
sqm
L.S.
cum
11.00
40.43
0.224
170.00
1.00
2578.45
1870.00
40.43
577.57
tone
tone
Kilogram
0.088
0.088
3.08
4500.00
47.29
42.00
396.00
4.16
129.36
Day
Day
Day
1.60
2.00
1.00
141.60
135.25
138.45
226.56
270.56
138.45
Day
Day
L.S.
Kilogram
1.00
1.60
162.59
5.92
138.45
200.00
1.00
42.00
138.45
320.00
162.59
-248.64
4025.43
40.25
4065.68
609.85
4675.53
467.55
467.55
11.20
11.20.1
Code
7070
9999
0367
0368
2209
0875
0124
0115
0101
11.20
11.20.2
Code
7237
9999
0367
0368
2209
0876
0124
0115
0101
Description
Details of cost for 10 sqm.
MaterialsChequered cement concrete tiles i/c10% wastage sqm
Carriage of tiles
Cement mortar 1:4(1 Cement: 4Coarse sand)
Rate as per item no. 3.9
Grey cement for slurry @ 4.4Kg/sqm. = 44 kg.
+ grey cement for grouting 2.4kg/sqm. = 24 kg.
Total = 68 kg.
White cement for grouting @ 2.4kg/sqm. = 24 tonne
kg.
Carriage of cement
Medium shade pigment
LabourMason 2nd class
Coolie
Bhisti
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 10 sqm.
Cost of 1 sqm.
Say
495
Unit
Quantity
Rate
Amount
sqm
L.S.
cum
11.00
40.43
0.22
415.00
1.00
2578.45
4565.00
40.43
567.26
tonne
tonne
tonne
kilogram
0.044
0.048
0.092
3.08
4500.00
9700.00
47.29
65.00
198.00
465.60
4.35
200.20
Day
Day
Day
1.60
2.00
1.00
141.60
135.25
138.45
226.56
270.50
138.45
6676.35
66.76
6743.11
1011.47
7754.58
775.46
775.45
Unit
Quantity
Rate
Amount
L.S.
cum
11.00
40.43
0.22
305.00
1.00
2578.45
3355.00
40.43
567.26
tonne
0.068
4500.00
306.00
0.024
9700.00
232.80
tonne
Kilogram
0.092
3.08
47.29
45.00
4.35
138.60
Day
Day
Day
1.60
2.00
1.00
141.60
135.25
138.45
226.56
270.50
138.45
5279.95
52.80
5332.75
799.91
6132.66
613.27
613.25
11.2
11.20.3
Code
7236
9999
0367
2209
0874
0124
0115
0101
11.20 :
11.20.4
Code
7236
9999
0367
2209
0874
0124
0115
0101
0874
496
Unit
Quantity
Rate
Amount
sqm
L.S.
cum
11.00
40.43
0.22
193.00
1.00
2578.45
2123.00
40.43
567.26
tonne
0.092
4500.00
414.00
tonne
Kilogram
0.092
3.08
47.29
42.00
4.35
129.36
Day
Day
Day
1.60
2.00
1.00
141.60
135.25
138.45
226.56
270.50
138.45
3913.91
39.14
3953.05
592.26
4546.01
454.60
454.60
Unit
Quantity
Rate
Amount
sqm
L.S.
cum
11.00
40.43
0.22
193.00
1.00
2 578.45
2 123.00
40.43
567.26
tonne
0.092
4 500.00
414.00
tonne
kilogram
0.092
3.08
47.29
42.00
4.35
129.36
Day
Day
Day
kilogram
1.60
2.00
1.00
5.92
141.60
135.25
138.45
42.00
226.56
270.50
138.45
-248.64
3665.27
Code
Description
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 10 sqm.
Cost of 1 sqm.
Say
11.21 :
11.21.1 :
11.21.1.1:
Code
7077
9999
9999
0367
7024
0367
0123
0115
9999
Providing and fixing 10mm thick acid and/or alkali resistant til
make and colour using acid and/or alkali resisting mortar bedd
with acid and/or alkali resisting cement as per IS : 4457 compl
direction of Engineer-in- Charge.
Description
Details of cost for 1 sqm.
MaterialsAcid proof tiles of size 300x300mm, 10mm
thick =11.11 nos+
Add wastage and breakage @ 2.5% = 0.28
nos.
= 11.39 nos. Say 12 nos.
Acid proof tiles
Carriage
10mm thick cement motar 1:4 (1 Cement: 4
Coarse sand) (Rate as per item No 3.9)
Mortar for pointing in acid/alkali resistant
cement
Cement for slurry over bed @ 3.3kg per sqm.
Difference of cost for using acid proof cement
instead of ordinary cement
Acid proof cement
Less Ordinary Cement
LabourMason 1 st class
Coolie
Sundries including carriage of cement etc.
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 1 sqm.
Say
497
Unit
Quantity
Rate
Amount
36.65
3701.92
555.29
4257.21
425.72
425.70
Quantity
Rate
Amount
10 Nos
L.S.
cum
12.00
6.24
0.012
460.00
1.00
2 578.45
552.00
6.24
30.94
L.S.
40.43
1.00
40.43
tonne
0.0033
4 500.00
14.85
tonne
tonne
0.0079
0.0079
7 400.00
4 500.00
58.46
-35.55
Day
Day
L.S.
0.20
0.20
26.91
151.50
135.25
1.00
30.30
27.05
26.91
751.63
7.52
759.15
113.87
873.02
873.00
11.21
11.21.2
11.21.2.1
Code
Description
Details of cost for 1 sqm.
MaterialsAcid proof tiles of size 300x300mm, 10mm
thick = 11.11nos.+
Add wastage and breakage @ 2.5% = 0.28
nos.
= 11.39 nos. Say 12 nos.
Acid proof tiles size 300x300mm, 10mm th
Carriage of tiles
12mm .thick.Cement mortar, 1:4
(Rate as per item No 3.9)
Difference of cost for using^acid proof cem
instead of ordinary cement
Acid proof cement
Less Ordinary Cement
Mortar for pointing in acid proof cement
Acid proof cemen for slurry over plaster
3.3kg/sqm.
Labour-
7077
9999
0367
0123
0115
7024
9999
7024
9999
11.22
11.22.1
11.22.1.1 8
Code
2751
9999
0367
9999
9999
Description
Details of cost for lsqm.
Materials8mm thick marble tiles (polished) Raj nagar
including wastage
Carriage of tiles
12mm thick cement mortar 1:3(1 Cement: 3
Coarse sand)
(Rate as per items No. 3.8)
Mortar for pointing in white cement
Cement for slurry @ 3.3kg/sqm.
Pigment
Labour-
498
iding and fixing 10mm thick acid and/or alkali resistant tiles of approved
e and colour using acid and/or alkali resisting mortar bedding and joints
d with acid and/or alkali resisting cement as per IS : 4457 complete as per the
ction of Engineer-in- Charge.
ado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement: 4 coarse sand).
Unit
Quantity
Rate
L.S.
cum
12.00
6.24
0.014
460.00
1.00
2578.45
tonne
tonne
L.S.
tonne
0.0086
0.0086
40.43
0.0033
7400.00
4500.00
1.00
7 400.00
Day
Day
L.S.
0.25
0.25
26.91
151.50
135.25
1.00
rdinary Cement
for pointing in acid proof cement
oof cemen for slurry over plaster
Quantity
Rate
sqm
1.061
294.00
L.S.
cum
3.9
0.014
1.00
3 169.60
L.S.
tonne
L.S.
25.35
0.0033
2.08
1.00
4 500.00
1.00
e as per the
arse sand).
Amount
552.00
6.24
36.10
63.64
-38.70
40.43
24.42
37.88
33.81
26.91
782.73
7.83
790.56
118.58
909.14
909.15
with grey
Amount
311.93
3.90
44.37
25.35
14.85
2.08
Code
0123
0115
9999
11.23 :
11.23.1 :
Code
6001
0367
9999
0123
0114
0115
0139
0013
9999
Description
Mason 1st class
Coolie
Sundries including carriage of cement etc.
TOTAL
Add 1% for water charges
TOTAL
Add .15% for contractors profit and overheads
Cost of 1 sqm.
Say
499
Unit
Quantity
Rate
Amount
Day
Day
L.S.
0.25
0.25
16.90
151.50
135.25
1.00
37.88
33.81
16.90
491.07
4.91
495.98
74.40
570.38
570.40
Unit
Quantity
Rate
Amount
sqm
11.50
1 722.00
19 803.00
cum
0.224
2 578.45
577.57
cum
0.05
4 500.00
225.00
L.S.
26.91
1.00
26.91
Day
Day
Day
Day
1.20
1.00
1.00
5.00
151.50
135.25
135.25
138.45
181.80
135.25
135.25
692.25
Day
L.S.
4.00
134.55
200.00
1.00
800.00
134.55
22711.58
227.12
22 938.70
3 440.80
26 379.50
2 637.95
2 637.95
11.23 :
11.23.2 :
Code
7071
0367
9999
0123
0114
0115
0139
0013
9999
11.23 :
11.23.3 :
Code
7850
0367
9999
@,
Description
Details of cost for 10 sqm.
Materials18mm thick marble slab = 10.00sqm.+
Add for wastage 15% = 1.50sqm.
Total = 11.50sqm.
Marble Stone Slab 18mm thick ( Agaria White
Spot less)
Base mortar 1:4 cement: 4 Coarse sand)
(Rate as per item No. 3.9)
Cement for slurry @4.4 kg/sqm. (i) for
bedding = 44 kg+ (ii) for jointing = 6 Kg.
Total = 50 Kg.
Carriage of marble slab
500
Unit
Quantity
Rate
Amount
sqm
cum
11.50
0.224
415.00
2578.45
4772.50
577.57
tonne
0.05
4500.00
225.00
L.S.
26.91
1.00
26.91
Day
Day
Day
Day
1.20
1.00
1.00
5.00
151.50
135.25
135.25
138.45
181.80
135.25
135.25
692.25
Day
L.S.
4.00
134.55
200.00
1.00
800.00
134.55
7681.08
76.81
7757.89
1163.68
8921.57
892.16
892.15
Unit
Quantity
Rate
Amount
sqm
11.50
1 000.00
11 500.00
cum
0.224
2 578.45
577.57
tonne
0.05
4 500.00
225.00
L.S.
26.91
1.00
26.91
Code
0123
0114
0115
0139
0013
9999
11.23 :
11.23.4 :
Code
6019
0367
9999
0123
0114
0115
0139
0013
9999
Description
Labour(for finishing, polishing and fixing)
Mason 1 st class
Beldar
Coolie
Beldar for rubbing and polishing (Special
Rate)
Machine
Sundries and carriage of cement etc.
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 10 sqm.
Cost of 1 sqm.
Say
Description
Details of cost for 10 sqm.
Materials18mm thick marble slab = 10.00sqm.+
Add for wastage 15% = 1.50sqm.
Total = 11.50sqm.
Makrana Dhobi Doongri 18mm thick marble
slab
Base mortar 1:4, (1 Cement: 4 Coarse sand)
(Rate as per item No. 3.9)
Cement for slurry @ 4.4kg/sqm. (l) for
bedding = 44 kg+ (ii) for jointing = 6 Kg.
Total = 50 Kg.
Carriage of marble slab
Labour( for finishing, polishing and fixing)
Mason 1st class
Beldar
Coolie
Beldar for rubbing and polishing (Special
Rate)
Machine
Sundries and carriage of cement etc.
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 10 sqm.
Cost of 1 sqm.
Say
501
Unit
Quantity
Rate
Amount
Day
Day
Day
Day
1.20
1.00
1.00
5.00
151.50
135.25
135.25
138.45
181.80
135.25
135.25
692.25
Day
L.S.
4.00
134.55
200.00
1.00
800.00
134.55
14 408.58
144.09
14 552.67
2 182.90
16 735.57
1 673.56
1 673.55
Unit
Quantity
Rate
Amount
sqm
11.50
415.00
4 772.50
cum
0.224
2 578.45
577.57
tonne
0.05
4 500.00
225.00
L.S.
26.91
1.00
26.91
Day
Day
Day
Day
1.20
1.00
1.00
5.00
151.50
135.25
135.25
138.45
181.80
135.25
135.25
692.25
Day
L.S.
4.00
134.55
200.00
1.00
800.00
134.55
7 681.08
76.81
7 757.89
1 163.68
8 921.57
892.16
892.15
11.23 :
11.23.5 :
Code
6010
0367
9999
0123
0114
0115
0139
0013
9999
11.23 :
11.23.6:
Code
6007
0367
9999
Description
Details of cost for 10 sqm.
Materials18mm thick marble slab = 10.00sqm.+
Add for wastage 15% = 1.50sqm.
Total = 11.50sqm.
Pink plain marble 18mm thick marble slab
Base mortar 1:4(1 : Cement: 4coarse sand)
(Rate as per item No. 3.9)
Cemen for slurry @4.4Kg/sqm(i)for
bedding = 44 kg+ (ii) for jointing = 6 Kg.
Total = 50 Kg.
Carriage of marble slab
Labour-
502
Unit
Quantity
Rate
Amount
sqm
cum
11.50
0.224
580.00
2 578.45
6 670.00
577.57
tonne
0.05
4 500.00
225.00
L.S.
26.91
1.00
26.91
Day
Day
Day
Day
1.20
1.00
1.00
5.00
151.50
135.25
135.25
138.45
181.80
135.25
135.25
692.25
Day
L.S.
4.00
134.55
200.00
1.00
800.00
134.55
9 578.58
95.79
9 674.37
1451.16
11 125.53
1 112.55
1 112.55
Unit
Quantity
Rate
Amount
sqm
cum
11.50
0.224
546.00
2 578.45
6 279.00
577.57
tonne
0.05
4 500.00
225.00
L.S.
26.91
1.00
26.91
Code
0123
0114
0115
0139
0013
9999
11.24 :
Code
0126
0114
0139
9999
Description
(for finishing, polishing and fixing)
Mason 1st class
Beldar
Coolie
Beldar for rubbing and polishing (Special
Rate)
Machine
Sundries and carriage of cement etc.
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 10 sqm.
Cost of 1 sqm.
Say
Description
Details of cost for 10m
LabourMason (Ornamental) marble stone
Beldar
Beldar for rubbing and polishing (Special
Rate)
Sundries
TOTAL
Add 1 % for water charges
TOTAL
Add ,15% for contractors profit and overheads
Cost for 10m
Cost for lm
Say
11.25 :
Code
Description
Details of cost for 10sqm.
LabourMason 1st class
Beldar
Coolie
Beldar for rubbing and polishing (Special
Rate)
Sundries
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost for 10sqm.
Cost for lsqm.
Say
0123
0114
0115
0139
9999
503
Unit
Quantity
Rate
Amount
Day
Day
Day
Day
1.20
1.00
1.00
5.00
151.50
135.25
135.25
138.45
181.80
135.25
135.25
692.25
Day
L.S.
4.00
134.55
200.00
1.00
800.00
134.55
9187.58
91.88
9279.46
1 391.92
10 671.38
1 067.14
1 067.15
Unit
Quantity
Rate
Amount
Day
Day
Day
2.00
1.50
2.50
151.50
135.25
138.45
303.00
202.88
346.12
L.S.
53.82
1.00
53.82
905.82
9.06
914.88
137.23
1 052.11
105.21
105.20
Quantity
Rate
Amount
Day
Day
Day
Day
1.95
1.40
0.75
3.18
151.50
135.25
135.25
138.45
295.42
189.35
101.44
440.27
L.S.
26.91
1.00
26.91
1 053.39
10.53
1 063.92
159.59
1 223.51
122.35
122.35
11.26 :
11.26.1 :
Code
1168
2216
0367
2209
0874
0124
0114
0115
0139
0013
9999
11.27 :
Code
Description
Details of cost for 10sqm.
Materials25mm thick Kota stone slabs polished
including 15% wastage
Carriage of slabs
Cement mortar 1:3 (1 Cement: 3 Coarse sand)
(Rate as per item No. 3.8)
Cement for slurry
Carriage of cement
Pigment dark shade
LabourMason 2nd class
Beldar
Coolie
Beldar for rubbing and polishing (Special
Rate)
1168
2216
0367
2209
0874
0124
0114
0115
0139
504
Unit
Quantity
Rate
Amount
sqm
11.50
239.00
2 748.50
tonne
cum
tonne
0.67
0.224
0.064
47.29
2 578.45
4 500.00
31.68
577.57
288.00
tonne
kilogram
0.064
4.50
47.29
42.00
3.03
189.00
Day
Day
Day
Day
1.20
1.00
1.00
5.00
141.60
135.25
135.25
138.45
169.92
135.25
135.25
692.25
Day
L.S.
4.00
208.13
200.00
1.00
800.00
208.13
5 978.58
59.79
6 038.37
905.76
6 944.13
694.41
694.40
Quantity
Rate
Amount
sqm
11.50
239.00
2 748.50
tonne
cum
0.67
0.144
47.29
3 169.60
31.68
456.42
tonne
tonne
kilogram
0.064
0.064
4.50
4 500.00
47.29
42.00
288.00
3.03
189.00
Day
Day
Day
Day
3.00
3.00
1.00
7.00
141.60
135.25
135.25
138.45
424.80
405.75
135.25
969.15
Code
11.28 :
11.28.1 :
Code
0123
0100
0115
0101
11.28 :
11.28.2 :
Code
Description
Sundries
9999
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost for 10sqm.
Cost for 1sqm.
Say
Description
Details of cost for 10sqm.
Materials
White sand stone
Finished work =10 sqm
Add wastage 10% =1.00sqm
Total = 11.00 sqm
White sand stone slab 40 mm thick
1165
(un-dressed)
Carriage
9999
Cement mortar 1:5 (1 cement :5 Course sand
505
Unit
L.S.
Quantity
174.98
Rate
1.00
Amount
174.98
5 826.56
58.27
5 884.83
882.72
6 767.55
676.76
676.75
Quantity
Rate
Amount
sqm
L.S.
cum
11.00
34.06
0.25
120.00
1.00
2 260.15
1 320.00
34.06
565.04
Day
Day
Day
Day
L.S.
3.10
1.10
0.55
0.27
10.79
151.50
138.45
135.25
138.45
1.00
469.65
152.30
74.39
37.38
10.79
2 663.61
26.64
2 690.25
403.54
3 093.79
309.38
309.40
Quantity
Rate
Amount
sqm
11.00
140.00
1 540.00
L.S.
cum
34.06
0.25
1.00
220.15
34.06
565.04
Code
0123
0100
0115
0101
9999
11.29 :
11.29.1:
Code
1164
9999
0123
0100
0115
0101
9999
Description
(Rate as per item No. 3.10)
(i) for bedding ).224cum+ (ii) for joining =
0.026 cum. Total=0.250cum.
LabourMason 1st class
Bandhani
Coolie
Bhisti
Sundries
TOTAL
Add for water charges @ 1%
TOTAL
Add for contractors profit and overheads @
15%;
Cost for 10 sqm.
Cost for 1sqm.
Say
506
Unit
Quantity
Rate
Amount
Day
Day
Day
Day
L.S.
3.10
1.10
0.55
0.27
10.79
151.50
138.45
135.25
138.45
1.00
469.65
152.30
74.39
37.38
10.79
2 883.61
28.84
2 912.45
436.87
3 349.32
334.93
334.95
Quantity
Rate
Amount
sqm
L.S.
cum
11.00
34.06
0.25
120.00
1.00
2 260.15
1 320.00
34.06
565.04
cum
0.023
3 959.25
91.06
Day
Day
Day
Day
L.S.
3.90
1.10
1.40
0.55
26.91
151.50
138.45
135.25
138.45
1.00
590.85
152.30
189.35
76.15
26.91
3 045.72
30.46
3 076.18
461.43
3 537.61
353.76
353.75
11.29
11.29.2:
Code
1165
9999
0123
0100
0115
0101
9999
11.30 :
11.30.1:
Code
1164
9999
Description
Details of cost for 10sqm.
Materials
Finished work = 10sqm
Add wastage 10% =1.00sqm
Total = 11.00 sqm
White sand stone slab 40 mm thick
(un-dressed)
Carriage
Cement mortar 1:5(1 Cement: 5 Coarse sand)
Rate as per item No.3.10
(i) for bedding = 0.224 cum+ (ii) for joining =
0.026 cum. Total=0.250cum.
Cement mortar 1:2(1 Cement: 2 stone dust
for pointing) ( Rate as per item No.3.12)
LabourMason 1st class
Bandhani
Coolie
Bhisti
Sundries
TOTAL
Add for water charges @ 1%
TOTAL
Add for contractors profit and overheads @
15%
Cost for 10 sqm.
Cost for 1 sqm.
Say
Description
Details of cost for 10sqm.
Materials
Finished work 10 sqm
Add wastage 10% = 1.00 sqm
Total = 11.00 sqm
Red sand stone slab 40 mmthick (un-dressed)
Carriage
Cement Mortar 1:5 (1 Cement: 5 Coarse sand)
Rate as per item No.3.10
(i) for bedding = 0.224 cum+ (ii) for
joining = 0.026 cum. Total=0.250cum.
Cement mortar 1:2(1 Cement: 2 stone dust)
for pointing Rate as per item No.3.12
Labour-
507
Quantity
Rate
Amount
sqm
11.00
140.00
1 540.00
L.S.
cum
34.06
0.25
1.00
2 260.15
34.06
565.04
cum
0.023
3 959.25
91.06
Day
Day
Day
Day
L.S.
3.90
1.10
1.40
0.55
26.91
151.50
138.45
135.25
138.45
1.00
590.85
152.30
189.35
76.15
26.91
3 265.72
32.66
3 298.38
494.76
3 793.14
379.31
379.30
Quantity
Rate
Amount
sqm
L.S.
cum
11.00
34.06
0.25
120.00
1.00
2260.15
1320.00
34.06
565.04
cum
0.023
3959.25
91.06
Code
0123
0100
0115
0101
9999
0139
0013
11.30 :
11.30.2:
Code
1165
9999
0123
0100
0115
0101
9999
0139
0013
Description
Mason 1st class
Bandhani
Coolie
Bhisti
Sundries
Labour for rubbing of stone
Beldar for rubbing (special rate)
Machine
TOTAL
Add for water charges @ 1%
TOTAL
Add for contractors profit and overheads @
15%
Cost for 10 sqm.
Cost for 1 sqm.
Say
Description
Details of cost for 10sqm.
Materials
Finished work 10 sqm
Add wastage 10%= 1.00 sqm
Total = 11.00 sqm
White sand stone slab 40 mm thick
(un-dressed)
Carriage
Cement Mortar 1:5(1 Cement: 5 Coarse sand)
Rate as per item No. 3.10
(i) for bedding = 0.224 cum+ (ii) for
joining = 0.026 cum. Total=0.250cum.
Cement mortar 1:2(1 Cement: 2 stone dust)
for pointing Rate as per item No. 3.12
LabourMason 1 st class
Bandhani
Coolie
Bhisti
Sundries
Labour for rubbing of stone
Beldar for rubbing (special rate)
Machine
TOTAL
Add for water charges @ 1%
TOTAL
Add for contractors profit and overheads@
15%
Cost for 10sqm.
Cost for 1sqm.
Say
508
Unit
Day
Day
Day
Day
L.S.
Quantity
3.90
1.10
1.40
0.55
26.91
Rate
151.50
138.45
135.25
138.45
1.00
Amount
590.85
152.30
189.35
76.15
26.91
Day
Day
0.618
0.988
138.45
200.00
85.56
197.60
3328.88
33.29
3362.17
504.33
3866.50
386.65
386.65
Quantity
Rate
Amount
sqm
11.00
140.00
1540.00
L.S.
cum
34.06
0.25
1.00
2260.15
34.06
565.04
cum
0.023
3959.25
91.06
Day
Day
Day
Day
L.S.
3.90
1.10
1.40
0.55
26.91
151.50
138.45
135.25
138.45
1.00
590.85
152.30
189.35
76.15
26.91
Day
Day
0.618
0.988
138.45
200.00
85.56
197.60
3 548.88
35.49
3 584.37
537.66
4 122.03
412.20
412.20
11.31 :
Code
0126
11.32 : Extra for Kota stone/ sand stone in treads of steps and risers using
upto 1.05 metre .
Code
0124
0114
11.33 :
11.33.1:
Code
1190
1231
2204
0682
1111
1114
9999
Description
Details of cost for 10sqm.
LabourMason 2nd class
Beldar
TOTAL
Add 1 % for water charges
TOTAL.
Add 15% for contractors profit and overheads
Cost for 10 sqm.
Cost for 1 sqm.
Say
509
Quantity
Rate
Amount
Day
1.50
151.50
227.25
227.25
2.27
229.52
34.43
263.95
236.95
26.40
26.40
Quantity
Rate
Amount
Day
Day
0.20
0.20
141.60
135.25
28.32
27.05
55.37
0.55
55.92
8.39
64.31
6.43
6.45
Unit
Quantity
Rate
Amount
10 cudm
10 cudm
cum
100 Nos
298.10
298.10
0.2981
200.00
410.00
72.00
60.81
40.00
12222.10
2146.32
18.13
80.00
Day
Day
L.S.
2.68
1.35
33.28
151.50
135.25
1.00
406.02
182.59
33.28
15088.44
150.88
15239.32
2285.90
17525.22
1752.52
1752.50
11.33 :
11.33.2:
Code
1194
2500
2204
0682
0111
0114
9999
Description
Details of cost for 2.5x4=10 sqm.
MaterialsFirst class deodar wood planks
No of joints = 4000/138 = 28.97
= (29-l) = 28nos
Qty of wood required
2.5(4+0.336)x0.025 = 0.271 cum
Add wastage @ 10 % = 0.027 cum
= 0.2981 cum = 298.10 cudm First class deodar wood planks
Extra for selected planks
Carriage of timber
Iron screws 50 mm (slotted counters sunk
head type)
LabourCarpenter 1 st class
Beldar
Sundries for glue etc.
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost for 10 sqm.
Cost for 1 sqm.
Say
11.34 :
Code
Description
Details of cost for l sqm.
Bitumen blown type
i) For bed layer @ 2.45kg/sqm. = 2.45kg+
ii) For dipping blocks L.S. = 2.00Kg.
= 4.45kg.
Bitumen blown type
Carriage of bitumen
1st class teak wood in scantling for wooden
blocks
1 sqm x 0.038 m = 0.038 cum
Add 10 % wastage = 0.0038 cum
Total = 0.0418 cum or 41.80 cudm
st
1 class teak wood in scanting for wooden
blocks
Carriage of timber
LabourCarpenter 1st class
Beldar
0313
2211
1187
2204
0111
0114
510
Unit
10 cudm
10 cudm
cum
100 Nos
Day
Day
L.S.
Quantity
Rate
Amount
298.10
298.10
0.2981
200.00
335.00
59.00
60.81
40.00
9 986.35
1 758.79
18.13
80.00
2.16
1.08
26.91
151.50
135.25
1.00
327.24
146.07
26.91
12 343.49
123.43
12 466.92
1 870.04
14 336.96
1 433.70
1 433.70
tonne
tonne
10 cudm
cum
Day
Day
Quantity
Rate
Amount
0.0044
0.0044
25000.00
53.21
110.00
0.23
41.80
492.00
2 056.56
0.0418
60.81
2.54
1.75
2.25
151.50
135.25
265.12
304.31
Code
0115
0130
9999
Description
Coolie
Mistry
Sundries such as fuel, kerosene oil, sand paper
TOTAL
Add 1% for water charges
TOTAL
Add 10% for contractors profit and overheads
Cost for 1 sqm.
Say
11.35 :
Code
Description
1007
1008
2205
1215
9999
0103
0123
0114
511
Unit
Quantity
Rate
Amount
Day
Day
L.S.
1.50
0.10
80.73
135.25
151.50
1.00
202.88
15.15
80.73
3 037.52
30.38
3 067.90
460.18
3 528.08
3 528.10
Quantity
Rate
Amount
quintal
0.162
3100.00
502.20
quintal
tonne
cm
0.0025
0.016
6.00
2900.00
47.29
1.00
7.25
0.76
6.00
L.S.
9.10
1.00
9.10
Day
Day
Day
0.09
0.45
0.25
141.60
151.50
135.25
12.47
68.18
33.81
sqm
0.06
12.65
7.59
647.63
6.40
654.03
96.97
751.00
48.05
48.05
11.36 :
Providing and fixing 1st quality ceramic glazed wall tiles confo
(thickness to be specified by the manufacture of approved ma
except burgundy, bottle green, black of any size as approved
in skirting, risers of steps and dados over 12 mm thick bed of
cement: 3 coarse sand) and jointing with grey cement slurry @
pointing in white cement mixed with pigment of matching sha
Code
Description
Details of cost for 1 sqm
MaterialsCeramic Glazed tiles = 1.00 sqm
Add for wastage & breakage @ 2.5 % = 0.025
sqm = 1.025 sqm
Tiles
Carriage of tiles
12 mm thick cement mortar 1:3 (1 cement: 3
coarse sand (Rate as per item No. 3.8)
Mortar for pointing in white cement
Cement for slurry over bed @ 3.3 kg per sqm
Labour:
Mason 1 st class
Coolie
Sundries including carriage of cement etc
TOTAL
Add for water charges @ 1 %
TOTAL
Add for contractors profit and overheads @ 15%
Cost for 1 sqm
Say
7800
9999
9999
0367
0123
0115
9999
11.37 :
Code
Description
Details of cost for 1 sqm
MaterialsGlazed Ceramic floor tiles 300x300 mm size =
1.00 sqm
Add for wastage & breakage @ 2.5 % = 0.025
sqm = Total 1.025 sqm
Tiles
Carriage of tiles
20 mm thick cement mortar 1:4(1 cement: 4
coarse sand) (Rate as per item No. 3.9)
Mortar for pointing in white cement
Cement for slurry over bed @ 3.3 kg per sqm
Labour:
Mason 1st class
Coolie
Sundries including carriage of cement etc
TOTAL
Add for water charges @ 1%
TOTAL
Add for contractors profit and overheads @
15%
Cost for 1 sqm
Say
7801
9999
9999
0367
0123
0115
9999
512
Quantity
Rate
Amount
Sqm.
L.S.
cum
1.025
6.24
0.014
268.00
1.00
3 169.60
274.70
6.24
44.37
L.S.
tonne
40.43
0.0033
1.00
4 500.00
40.43
14.85
Day
Day
L.S.
0.25
0.25
26.91
151.50
135.25
1.00
37.88
33.81
26.91
479.19
4.79
483.98
72.60
556.58
556.60
Quantity
Rate
Amount
Sq.m.
L.S.
cum
1.025
6.24
2578.45
320.00
1.00
0.024
328.00
6.24
61.88
L.S.
tonne
1.00
4500.00
20.20
0.0033
20.20
14.85
Day
Day
L.S.
0.20
0.20
26.91
151.50
135.25
1.00
30.30
27.05
26.91
515.43
5.15
520.58
78.09
598.67
598.65
513
11.38 :
Code
Description
Details of cost for 1 sqm
MaterialsGlazed Ceramic floor tiles 300x300 mm size =
1.00 sqm
Add for wastage & breakage @ 2.5 % = 0.025
sqm = Total 1.025 sqm
Tiles
Carriage of tiles
20 mm thick cement mortar 1:4(1 cement: 4
coarse sand) ( Rate as per item No. 3.9)
Mortar for pointing in white cement
Cement for slurry over bed @ 3.3 kg per sqm
Labour:
Mason 1 st class
Coolie
Sundries including carriage of cement etc
TOTAL
Add for water charges @ 1 %
TOTAL
Add for contractors profit and overheads @15%
Cost for 1 sqm
Say
7802
9999
9999
0367
0123
0115
9999
Unit
Sq.m.
L.S.
cum
L.S.
tonne
Day
Day
L.S.
11.39 :
Code
Description
Details of cost for 1 sqm
MaterialsRectified glazed Ceramic floor tiles 300x300mm
or more
= 1.000 sqm
Add for wastage & breakage @ 2.5 % = 0.025
sqm
Total = 1.025 sqm
Carriage of tiles
20 mm thick cement mortar 1:4 (1 cement: 4
coarse sand) ( Rate as per item No. 3.9)
Mortar for pointing in white cement
Cement for slurry over bed @ 3.3 kg per sqm
Labour:
Mason 1st class
Coolie
Sundries including carriage of cement etc
TOTAL
Add for water charges @ 1%
TOTAL
Add for contractors profit and overheads @
15.%
Cost for 1 sqm
7803
9999
9999
0367
0123
0115
9999
Unit
sqm
L.S.
cum
L.S.
tonne
Day
Day
L.S.
Say
1.025
6.24
0.024
20.20
0.0033
0.20
0.20
26.91
Rate
Amount
347.00
1.00
2 578.45
355.67
6.24
61.88
1.00
4 500.00
20.20
14.85
151.50
135.25
1.00
30.30
27.05
26.91
543.10
5.43
548.53
82.28
630.81
630.80
1.025
6.24
0.024
13.47
0.0033
0.20
0.20
26.91
Rate
Amount
462.00
1.00
2 578.45
473.55
6.24
61.88
1.00
4 500.00
13.47
14.85
151.50
135.25
1.00
30.30
27.05
26.91
654.25
6.54
660.79
99.12
759.91
759.90
11.40 :
Code
Description
Details of cost for 1 sqm
MaterialsRectified Glazed Ceramic floor tiles 200x300 mm
or more = 1.000 sqm
Add for wastage & breakage @ 2.5 % = 0.025
sqm
Total = 1.025 sqm
Carriage of tiles
20 mm thick cement mortar 1:4(1 cement: 4
coarse sand).
Mortar for pointing in white cement
Cement for slurry over bed @ 3.3 kg per sqm
Labour:
7804
9999
9999
0367
0123
0115
9999
11.41 : Providing and laying vitrified floor tiles in different sizes (thicknes
by the manufacturer) with water absorptions less than 0.08%
IS : 15622 of approved make in all colours and shades, laid on
mortar 1:4 (1 cement: 4 coarse sand) including grouting the j
and matching pigments etc., complete.
11.41.1: Size of Tile 50x50 cm
Code
8620
9999
9999
0367
0123
0115
9999
Description
Details of cost for 1 sqm
MaterialsPorcelain floor tiles 50x50 cm size =
1.000 sqm
Add for wastage & breakage @ 2.5 % = 0.025
sqm
Total = 1.025 sqm
Carriage of tiles
20 mm thick cement mortar 1:4(1 cement: 4
coarse sand)( Rate as per item No. 3.9)
Mortar for pointing in white cement
Cement for slurry over bed @ 3.3 kg per sqm
Labour:
Mason 1st class
Coolie
Sundries including carriage of cement etc
TOTAL
Add for water charges @ 1%
514
sqm
L.S.
cum
L.S.
tonne
Day
Day
L.S.
Quantity
Rate
Amount
1.025
6.24
0.024
496.00
1.00
2 578.45
508.40
6.24
61.88
13.47
0.0033
1.00
4 500.00
13.47
14.85
0.20
0.20
26.91
151.50
135.25
1.00
30.30
27.05
26.91
689.10
6.89
695.99
104.40
800.39
800.40
sqm
L.S.
cum
L.S.
tonne
Day
Day
L.S.
Quantity
Rate
Amount
1.025
6.24
0.024
645.00
1.00
2 578.45
661.13
6.24
61.88
3.64
0.0033
1.00
4 500.00
3.64
14.85
0.20
0.20
26.91
151.50
135.25
1.00
30.30
27.05
26.91
832.00
8.32
Code
Description
TOTAL
Add for contractors profit and overheads @
15%
Cost for 1 sqm
Say
11.41
11.41.2
Code
8621
9999
9999
0367
0123
0115
9999
11.41 :
11.41.3 :
Code
Description
Details of cost for 1 sqm
MaterialsPorcelain floor tiles 80x80 cm size =
1.000 sqm
Add for wastage & breakage @ 2.5 % = 0.025
sqm
515
Unit
Quantity
Rate
Amount
840.32
126.05
966.37
966.35
Unit
Quantity
Rate
Amount
sqm
L.S.
cum
1.025
6.24
0.024
700.00
1.00
2578.45
717.50
6.24
61.88
L.S.
tonne
3.64
0.0033
1.00
4500.00
3.64
14.85
Day
Day
L.S.
0.20
0.20
26.91
151.50
135.25
1.00
30.30
27.05
26.91
888.37
8.88
897.25
134.59
1031.84
1031.85
Unit
Quantity
Rate
Amount
Code
8622
9999
9999
0367
0123
0115
9999
11.41
11.41.4:
Code
8623
9999
9999
0367
0123
0115
9999
Description
Total = 1.025 sqm
Carriage of tiles
20 mm thick cement mortar 1:4(1 cement: 4
coarse sand) (Rate as per item No. 3.9)
Mortar for pointing in white cement
Cement for slurry over bed @ 3.3 kg per sqm
Labour:
Mason 1st class
Coolie
Sundries including carriage of cement etc
TOTAL
Add for water charges @ 1%
TOTAL
Add for contractors profit and overheads @
15%
Cost for 1 sqm
Say
Description
Details of cost for 1 sqm
MaterialsPorcelain floor
tiles 100x100 cm size = 1.000 sqm
Add for wastage & breakage @ 2.5 %
= 0.025 sqm
Total = 1.025 sqm
Carriage of tiles
20 mm thick cement mortar 1:4(1 cement: 4
coarse sand). (Rate as per item No. 3.9)
Mortar for pointing in white cement
Cement for slurry over bed @ 3.3 kg per sqm
Labour:
Mason 1st class
Coolie
Sundries including carriage of cement etc
TOTAL
Add for water charges @ 1 %
TOTAL
Add for contractors profit and overheads @
15%
Cost for 1 sqm
Say
516
Unit
sqm
L.S.
cum
Quantity
1.025
2.40
0.024
Rate
1076.00
1.00
2 578.45
Amount
1102.90
6.24
61.88
L.S.
tonne
2.60
0.0033
1.00
4 500.00
2.60
14.85
Day
Day
L.S.
0.20
0.20
26.91
151.50
135.25
1.00
30.30
27.05
26.91
1272.73
12.73
1285.46
192.82
1478.28
1478.30
Unit
Quantity
Rate
Amount
sqm
L.S.
cum
1.025
6.24
0.024
1290.00
1.00
2578.45
1322.25
6.24
61.88
L.S.
tonne
2.60
0.003
1.00
4500.00
2.60
14.85
Day
Day
L.S.
0.20
0.20
26.91
151.50
135.25
1.00
30.30
27.05
26.91
1492.08
14.92
1507.00
226.05
1733.05
1733.05
11.42:
Code
0367
0123
0115
11.43:
Code
0123
0115
Deduet for not using 20mm thick cement mortar 1:4 (1 cem
bedding in laying of floor tiles.
Description
Details of cost for 1 sqm
MATERIALS
Cement Mortar. 1:4 (1 cement: 4 coarse sand).
(Rate as per item No. 3.9)
Mortar foer pornting in whicte cement
9999
Cement for slurry over bed @ 3.3kg/sqm
LABOUR:Mason (brick layer) 1st class
Coolie
Sundries i/c carriage of cement etc.
9999
Total
Add for water charges @ 1%
Total
Add for contractor profit and overhead @
15%
Cost for 1 sqm
Say
517
Quantity
Rate
Amount
cum
0.024
2578.45
61.88
L.S.
tonne
40.43
0.0033
1.00
4500.00
40.45
14.85
Day
Day
L.S.
0.20
0.20
26.91
151.50
135.25
1.00
30.30
27.05
26.91
201.42
2.01
203.43
30.51
233.94
233.95
Quantity
Rate
Amount
per kg
L.S.
5.00
40.43
13.75
1.00
68.75
40.43
Day
Day
L.S.
0.20
0.20
26.91
151.50
135.25
1.00
30.30
27.05
26.91
193.44
1.93
195.37
29.31
224.68
224.70
519
ROOFING
12.1
12.1.1
Code
Description
Considering a roof with each sloping side
18.09x5.10m and the slope being flatter than 1
vertical to 2.5 horizontal
Details of cost for area of roof.
2x18.09x5.1 = 184.518 sqm.
Details of length and breadth.
Materials:
C.G.S. sheets 2x27 =54 nos. of size 2.5x0.9
metre @19.35 Kg each =1044.90Kg.
2x27=54 nos. of size
2.8xO.9@21.67kg. each = 1170.18Kg.
Total = 2215.08Kg.+
Add 5% Wastage = 110.75Kg.
= 2325.83 Kg.
23.26 quintals
(a) C.G.S. sheets
(b) Carriage of sheet
(c) G.I.Seam bolts and nuts 60cm
centre to centre zig-zag i.e. 30cm
centre to centre straight
Breadth is 5.1 metre
No. of bolts in one lap 5.1/0.3 =17 nos.
2x26(laps)x17 nos. = 884 nos.
Bolts and nuts
(d) G.I..J or L hooks 8mm dia.
(No. of purlins to be used 5 on either
side)2x5x27
(No. of sheets)x23 nos. of bolts
in each sheet = 810 nos.
G.I., J or L hooks
(e) Limpet washers (total of seam and J bolts)
884+810=1694
(f) Bitumen washers
(g) Carriage of bolts and washers
Sundries
Labour:
Mistry
Carpenter 2nd class
Beldar
Zink chromate yellow primer
Carriage of material
Painter
Coolie
Brushes, sand papers i/c sundries
Ready mixed paint on new work
Carriage of paint
Painter
3050
2302
1022
1023
1207
1208
9999
9999
0130
0112
0114
4202
9999
0131
0115
9999
0845
9999
0131
521
ss than 275gm/m2
Unit
Quantity
Rate
Amount
quintal
tonne
23.26
2.326
3 650.00
47.29
84899.00
110.00
10 Nos
884.00
9.00
795.60
10 Nos
100 Nos
810.00
1694.00
58.00
20.00
4698.00
338.80
100 Nos
L.S.
L.S.
1694.00
26.91
53.82
18.00
1.00
1.00
304.92
26.91
53.82
Day
Day
Day
litre
L.S.
Day
Day
L.S.
litre
L.S.
Day
1.30
15.50
15.50
2.53
0.52
1.13
1.13
50.57
3.75
6.76
2.53
151.50
141.60
135.25
58.00
1.00
141.60
135.25
1.00
95.00
1.00
141.60
196.95
2194.80
2096.38
146.74
0.52
160.01
152.83
50.57
356.25
6.76
358.25
Code
0115
9999
9999
Description
Coolie
Brushes and Sandpapers
Sundries
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 184.518 Sqm.
Cost of 1 Sqm.
Say
12.1
12.1.2
Code
Description
Considering a roof with each sloping side
18.09x5.10m and the slope being flatter than 1
vertical to 2.5 horizontal
Details of cost for area of roof.
2x18.09x5.1 = 184.518 sqm.
Details of length and breadth.
Length
26(laps)xO.135(each lap)=3.51
Width of Corrugated sheet with 10 corrugation
measured end to end = 0.8 metres 27 (nos. of
sheets)x0.80 (width of sheet) = 21.60 length
Less laps = 3.51
Length = 18.09
Breadth on one sideC.G.S. Sheet 1 No. of = 2.5 metres length+
C.G.S. Sheet 1 No. of = 2.8 metres length
= 5.3 metres
Deduct end lap of 20cm (-)0.2 metres
breadth = 5.1 m
Materials:
C.G.I.Sheets 0.8mm thick
2x27=54nos. @15.82Kg.each
= 854.38Kg(X)
2.5mx0.9m is the size of plain G.I.sheet which
on being corrugated will become 2.5mx0.8m
(The size of plain sheet is taken because the
weight is available only of plain sheets)
(Refer l.S. Code 277-1962)
2x27=54nos. of size. 2.8x0.9
@17.72Kg each = 956.8Kg (Y)
Total of (X)+(Y) = 1811.16Kg.
Add wastage @5% = 90.56Kg.
= 1901.72Kg
3050
2302
(a) Sheets
(b) Carriage of sheet
522
Unit
Quantity
Rate
Amount
Day
L.S.
L.S.
2.53
31.98
38.09
135.25
1.00
1.00
342.18
31.98
38.09
97359.36
973.59
98332.95
14749.94
113082.89
612.86
612.85
ss than 275gm/m2
Unit
Quantity
Rate
Amount
quintal
tonne
19.02
1.902
3650.00
47.29
69423.00
89.95
Code
1022
1023
1207
1208
9999
9999
0130
0112
0114
4202
9999
0131
0115
9999
0845
9999
0131
0115
9999
9999
12.1
12.1.3
Code
Description
centre to centre zig zag i.e. 30cm.
centre to centre straight
Breadth is 5.1 metre
No. of bolts in one lap 5.1/0.3 =17 nos.
2x26(laps)xl7 nos. = 884 nos.
Bolts and nuts
(d) G.I., j or L hooks 8mm dia.
(No. of purlins to be used 5 on either
side)2x5x27 (No. of sheets)x23 nos. of bolts
in each sheet = 810 nos.
G.I. J or L hooks
(e) Limpet washers (total of seam and J bolts)
884+810=1694
(f) Bitumen washers
(g) Carriage of bolts and washers
Sundries
Labour:
Mistry
Carpenter 2nd class
Beldar
Zink chromate yellow primer
Carriage of material
Painter
Coolie
Brushes, sand papers i/c sundries
Ready mixed paint on new work
Carriage of paint
Painter
Coolie
Brushes and Sandpapers
Sundries
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 184.518 Sqm.
Cost of 1 Sqm.
Say
523
Unit
Quantity
Rate
Amount
10 Nos
884.00
9.00
795.60
10 Nos
100 Nos
810.00
1694.00
58.00
20.00
4698.00
338.80
100 Nos
L.S.
L.S.
1694.00
26.91
53.82
18.00
1.00
1.00
304.92
26.91
53.82
Day
Day
Day
litre
L.S.
Day
Day
L.S.
litre
L.S.
Day
Day
L.S.
L.S.
1.30
15.50
15.50
2.53
0.52
1.13
1.13
50.57
3.75
6.76
2.53
2.53
31.98
38.09
151.50
141.60
135.25
58.00
1.00
141.60
135.25
1.00
95.00
1.00
141.60
135.25
1.00
1.00
196.95
2194.80
2096.38
146.74
0.52
160.01
152.83
50.57
356.25
6.76
358.25
342.18
31.98
38.09
81863.31
818.63
82681.94
12402.29
95084.23
515.31
515.30
Rate
Amount
ss than 275gm/sqm
Unit
Quantity
Code
3050
2302
1022
1023
1207
1208
9999
9999
0130
0112
0114
4202
9999
0131
0115
9999
0845
9999
Description
26(laps)xO.135(each lap)=3.51
Width of Corrugated sheet with 10 corrugation
measured end to end = 0.8 metres 27 (nos. of
sheets)x0.80 (width of sheet = 21.60 length
Less laps = 3.51
Length = 18.09
Breadth on one sideC.G.S. Sheet 1 No. of = 2.5 metres length+
C.G.S. Sheet 1 No. of = 2.8 metres length
= 5.3 metres
Deduct end lap of 20cm (-)0.2 metres
breadth = 5.1m
Materials:
C.G.I.Sheets 0.8mm thick
2x27=54nos. @12.82Kg.each
= 692.28 Kg(X)
2.5mxO.9m is the size of plain G.I.sheet which
on being corrugated will become 2.5mxO.8m
(The size of plain sheet is taken because the
weight is available only of plain sheets)
(Refer I.S. Code 277-1962)
2x27=54nos. of size-2.8x0.9
@13.38Kg each = 775.44Kg (Y)
Total of (X)+(Y) = 1467.72Kg.
Add wastage @5% = 73.39Kg.
= 1541.11HKg
(a) Sheets
(b) Carriage of sheet
(c) G.I. seam bolts and nuts 60cm
centre to centre zig zag i.e. 30cm.
centre to centre straight
Breadth is 5.1 metre
No. of bolts in one lap 5.1/0.3 =17 nos.
2x26(laps)xl7 nos. = 884 nos.
Bolts and nuts
(d) G.I., J or L hooks 8mm dia.
(No. of purlins to be used 5 on either
side)2x5x27 (No. of sheets)x23 nos. of bolts
in each sheet = 810 nos.
G.I. J or L hooks
(e) Limpet washers (total of seam and J bolts)
884+810= 1694
(f) Bitumen washers
(g) Carriage of bolts and washers
Sundries
Labour:
Mistry
Carpenter 2nd class
Beldar
Zink chromate yellow primer
Carriage of material
Painter
Coolie
Brushes, sand papers i/c sundries
Ready mixed paint on new work
Carriage of paint
524
Unit
Quantity
Rate
Amount
quintal
tonne
15.41
1.54
3650.00
47.29
56246.50
72.83
10 Nos
884.00
9.00
795.60
10 Nos
100 Nos
810.00
1694.00
58.00
20.00
4698.00
338.80
100 Nos
L.S.
L.S.
1694.00
26.91
53.82
18.00
1.00
1.00
304.92
29.91
53.82
Day
Day
Day
litre
L.S.
Day
Day
L.S.
litre
L.S.
1.30
15.50
15.50
2.53
0.52
1.13
1.13
50.57
3.75
6.76
151.50
141.60
135.25
58.00
1.00
141.60
135.25
1.00
95.00
1.00
196.95
2194.80
2096.38
146.74
0.52
160.01
152.83
50.57
356.25
6.76
Code
0131
0115
9,999
9,999
Description
Painter
Coolie
Brushes and Sandpapers
Sundries
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 184.518 Sqm.
Cost of 1 Sqm.
Say
12.2
Extra for straight cutting in C.G.S. sheet roofing for making ope
exceeding 40 sq. decimeter for chimney stacks, sky light etc. :
1.00 mm thick
12.2.1
Code
0102
0114
12.2
12.2.2
Code
0102
0114
Description
Details of cost for 3 metres periphery
Assuming a hole of 10dmx5dm area of the
hole 50dm2 and the perimeter of the hole 3
metre
Labour:
Blacksmith first class
Beldar
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 3.00 metres
Cost of 1.00 metre
Say
Extra for straight cutting in C.G.S. sheet roofing for making ope
exceeding 40 sq. decimeter for chimney stacks, sky light etc.:
0.80 mm thick
Description
Details of cost for 3 metres periphery
Assuming a hole of 10dmx5dm area of the
hole 50dm2 and the perimeter of the hole 3
metre
Labour:
Blacksmith first class
Beldar
TOTAL
Add 1 % for water charges
TOTAL
Add 10% for contractors profit and overheads
Cost of 3.00 metres
Cost of 1.00 metre
Say
525
Unit
Day
Day
L.S.
L.S.
Quantity
2.53
2.53
31.98
38.09
Rate
141.60
135.25
1.00
1.00
Amount
358.25
342.18
31.98
38.09
68669.69
686.70
69356.39
10403.46
79759.85
432.26
432.25
Quantity
Rate
Amount
Day
Day
0.15
0.15
151.50
135.25
22.72
20.29
43.01
0.43
43.44
6.52
49.96
16.65
16.65
Quantity
Rate
Amount
Day
Day
0.12
0.12
151.50
135.25
18.18
16.23
34.41
0.34
34.75
5.21
39.96
13.32
13.30
12.2
12.2.3
Code
0102
0114
12.3
12.3.1
Code
0102
0114
12.3
12.3.2
Code
0102
0114
526
Quantity
Rate
Amount
Day
Day
0.12
0.12
151.50
135.25
18.18
16.23
34.41
0.34
34.75
5.21
39.96
13.32
13.30
Unit
Quantity
Rate
Amount
Day
Day
3.13
6.26
151.50
135.25
474.20
846.66
1320.86
13.21
1334.07
200.11
1534.18
97.66
97.65
Unit
Quantity
Rate
Amount
Day
Day
2.50
5.00
151.50
135.25
378.75
676.25
1055.00
10.55
1065.55
159.83
1225.38
78.00
78.00
12.3
12.3.3
Code
0102
0114
12.4
12.4.1
Code
Description
0.80mm thick with zinc coating not less than
0992
2302
0222
1211
1208
9999
9999
0130
0102
0103
0114
275gm/m2
Consider the length of the ridge 10.35 metres.
The ridge will be made out of plain G.I.
Sheets
0.9mx1.8m
Three pieces will be 0.9m long and
0.60m wide overlapping 22.5cm.
Materials
G.I. plain sheets 0.80 thick
1.80x0.90msize5nos. @
11.39Kg. sheet = 56.95Kg +
Add 2% wastage = 1.14 Kg.
= 58.09 Kg. or 0.58 qunital
G.I. plain sheets
Carriage of sheets
G.I. seam bolts and nuts25mmx6mm (There are 14 joints)
G.I. seam bolts and nuts
G.I. plain washers
Bitumen washers
Carriage of seam bolts and washers
Sundries
Labour:
Mistry
Blacksmith first class
Blacksmith 2nd class
Beldar
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 10.35 metres
527
Unit
Quantity
Rate
Amount
Day
Day
2.50
5.00
151.50
135.25
378.75
676.25
1055.00
10.55
1065.55
159.83
1225.38
78.00
78.00
ss than 275gm/m2
Unit
Quantity
Rate
Amount
quintal
tonne
0.58
0.06
3450.00
47.29
2 001.00
2.74
10 Nos
100 Nos
100 Nos
L.S.
L.S.
28.00
28.00
28.00
1.82
13.52
30.00
21.00
18.00
1.00
1.00
84.00
5.88
5.04
1.82
13.52
Day
Day
Day
Day
0.40
1.20
0.80
2.40
151.50
151.50
141.60
135.25
60.60
181.80
113.28
324.60
2794.28
27.94
2822.22
423.33
3245.55
313.58
313.60
12.4
12.4.2
Code
Description
Details of cost for 10.35 metre long ridge.
G.I.plain sheets 0.63mm thick
1.8xO.9m size 5 nos. @9.23 Kg. per sheet =
46.15 Kg.+
Add 2% wastage = 0.91 Kg.
= 47.07 Kg.
Say 47 Kg.
G.I. plain sheets
Carriage of sheets
G.I. seam bolts and nuts25mmx6mm (There are 14 joints)
G.I. seam bolts and nuts
G.I. plain washers
Bitumen washers
Carriage of seam bolts and washers
Sundries
Labour:
Mistry
Blacksmith first class
Blacksmith 2nd class
Beldar
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 10.35 metres
Cost of 1.00 metre
Say
0992
2302
0222
1211
1208
9999
9999
0130
0102
0103
0114
12.5
12.5.1
Code
Description
Details of cost for 9.325m
Materials:
G.I. plain sheets 2.5xO.9m
4 nos. @ 29.95Kg/sheet =119.80Kg.+
Add 2% wastage = 2.40Kg.
= 122.20 kg. or 1.222quintal
G.I. plain sheets
Carriage of sheets
G.I. seam bolts and nuts25mmx6mm (There are 14 joints)
G.I. seam bolts and nuts
G.I. plain washers
Bitumen washers
Carriage of bolts, nuts and washers
Sundries
Labour:
Mistry
0992
2302
0222
1211
1208
9999
9999
0130
528
ss than 275gm/m2
Unit
Quantity
Rate
Amount
quintal
tonne
0.47
0.047
3450.00
47.29
1621.50
2.22
10 Nos
100 Nos
100 Nos
L.S.
L.S.
28.00
28.00
28.00
1.82
13.52
30.00
21.00
18.00
1.00
1.00
84.00
5.88
5.04
1.82
13.52
Day
Day
Day
Day
0.40
1.20
0.80
2.40
151.50
151.50
141.60
135.25
60.60
181.80
113.28
324.60
2414.26
24.14
2438.40
365.76
2804.16
270.93
270.95
ss than 350gm/m2
Unit
Quantity
Rate
Amount
quintal
tonne
1.222
0.12
3 450.00
47.29
4215.90
5.67
10 Nos
100 Nos
100 Nos
L.S.
L.S.
12.00
12.00
12.00
0.91
13.52
30.00
21.00
18.00
1.00
1.00
36.00
2.52
2.16
0.91
13.52
Day
0.40
151.50
60.60
Code
0102
0103
0114
Description
Blacksmith first class
Blacksmith 2nd class
Beldar
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 9.325 metres
Cost of 1.00 metre
Say
12.6
12.6.1
Code
Description
Details of cost for 12.125m
Consider a length of flashing 12.125 metres.
Materials:
G.I. plain sheet 1.25mm thick 3.2xO.75m
2 nos. @ 20.64 Kg. =41.28 Kg.+
Add 2% wastage = 0.83 Kg
= 42.11 Kg. or 0.4211 quintal
G.I. plain sheets
Carriage of sheets
G.I. seam bolts and nuts-25mmx6mm
(taking 2 bolts per joints)
G.I. seam bolts and nuts
Limpet washers
Bitumen washers
Carriage of G.I. seam bolts and washers
sundries
Labour:
Mistry
Blacksmith first class
Blacksmith 2nd class
Beldar
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 12.125 metres
Cost of 1.00 metre
Say
0992
2302
0222
1207
1208
9999
9999
0130
0102
0103
0114
12.7:
12.7.1:
Code
Description
0.80mm thick with zinc coating not less than
275gm/m2
529
Unit
Day
Day
Day
Quantity
1.20
0.80
2.40
Rate
151.50
141.60
135.25
Amount
181.80
113.28
324.60
4956.96
49.57
5006.53
750.98
5757.51
617.43
617.45
ss than 275gm/m2
Unit
Quantity
Rate
Amount
quintal
tonne
0.4211
0.041
3 450.00
47.29
1 452.79
1.94
10 Nos
100 Nos
100 Nos
L.S.
L.S.
6.00
6.00
6.00
0.39
10.79
30.00
20.00
18.00
1.00
1.00
18.00
1.20
1.08
0.39
10.79
Day
Day
Day
Day
0.50
1.48
1.00
3.00
151.50
151.50
141.60
135.25
75.75
224.22
141.60
405.75
2 333.51
23.34
2 356.85
353.53
2 710.38
223.54
223.55
Rate
Amount
ss than 275gm/m2
Unit
Quantity
Code
0992
2302
1008
1022
1024
1210
1208
9999
9999
0102
0114
9999
0130
0102
0112
0114
12.7 :
12.7.2 :
Code
0992
2302
1008
1022
1024
Description
Consider a length of 9.04m
Sheet used = 2.5x0.90m
= 2 nos.
Wt. = 2x15.82=31.64 Kg.
= 0.3164quintal
G.I. plain sheets
Carriage of sheets
Flats upto 10 mm in thickness
Galvanised steel bolts and nuts 6 mm dia and
25 mm long round head with slot
Galvanised steel bolts and nuts 10 mm dia and
125 mm long
G.I. plain washers thin
Bitumen washers
Carriage of G.I. seam bolts and washers
Sundries
Labour:
Blacksmith first class
Beldar
Sundries
Mistry
Blacksmith first class
Carpenter 2nd class
Beldar
TOTAL
Add 1 % for water charges
TOTAL
Add 15 % for contractors profit and overheads
Cost of 9.04 metres
Cost of 1.00 metre
Say
530
Unit
Quantity
Rate
Amount
quintal
tonne
quintal
10 Nos
0.3164
0.0316
0.0749
20.00
3 450.00
47.29
2900.00
9.00
1091.58
1.49
217.21
18.00
each
30.00
7.00
210.00
100 Nos
100 Nos
L.S.
L.S.
70.00
40.00
2.73
5.33
20.00
18.00
1.00
1.00
14.00
7.20
2.73
5.33
Day
Day
L.S.
Day
Day
Day
Day
0.50
0.50
12.61
0.28
0.84
0.62
1.68
151.50
135.25
1.00
151.50
151.50
141.60
135.25
75.75
67.62
12.61
42.42
127.26
87.79
227.22
2 208.21
22.08
2 230.29
334.54
2 564.83
283.72
283.70
Quantity
Rate
Amount
quintal
tonne
quintal
10 Nos
0.2364
0.0236
0.0749
20.00
3 450.00
47.29
2 900.00
9.00
815.58
1.12
217.21
18.00
each
30.00
7.00
210.00
Code
1210
1208
9999
9999
0102
0114
9999
0130
0102
0112
0114
12.8
Code
0223
2273
1023
1208
1209
9999
9999
0130
0112
0114
Description
G.I. plain washers thin
Bitumen washers
Carriage of G.I. seam bolts and washers
Sundries
Labour:
Blacksmith first class
Beldar
Sundries
Mistry
Blacksmith first class
Carpenter 2nd class
Beldar
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overhead
Cost of 9.04 metres
Cost of 1.00 metre
Say
in washers thin
531
Unit
100 Nos
100 Nos
L.S.
L.S.
Quantity
70.00
40.00
2.73
5.33
Rate
20.00
18.00
1.00
1.00
Day
Day
L.S.
Day
Day
Day
Day
0.50
0.50
12.61
0.28
0.84
0.62
1.68
151.50
135.25
1.00
151.50
151.50
141.60
135.25
Quantity
Rate
sqm
237.93
205.00
tonne
10 Nos
100 Nos
100 Nos
L.S.
L.S.
3.184
476.00
476.00
476.00
8.06
39.52
47.29
58.00
18.00
27.00
1.00
1.00
Day
Day
Day
2.34
9.34
9.34
151.50
141.60
135.25
0 degree pitch
er a shed of 20x10 metres.
al dimensions of plinth).
% wastage = 6.93
.42147= 1.68588 +
.35123= 1.4049
% wastage = 0.092
35 Say 3.184 t
n washers thick
e of bolts and nuts, washers etc.
es
Amount
14.00
7.20
2.73
5.33
75.75
67.62
12.61
42.42
127.26
87.79
227.22
1931.84
19.32
1951.16
292.67
2243.83
248.21
248.20
6 mm thick
with polymer coated
or with self drilling
s, rafters and
erever required
Amount
48775.65
150.57
2760.80
85.68
128.52
8.06
39.52
354.51
1322.54
1263.23
Code
Description
TOTAL
Add 1% for water charges
TOTAL
Add,.10% for contractors profit and overheads
Cost of 216.14 sqm.
Cost of 1.00 sqm.
Say
12.9 :
Code
Description
Details of cost for 3 metres of periphery
Area of cutting 0.9mx0.6m=0.54sqm.
Perimeter = 3 metres
Labour:
Carpenter 1st class
Beldar
TOTAL
Add 1% for water charges
TOTAL
Add 15 % for contractors profit and overheads
Cost for 3.00 metres
Cost for 1.00 metre of periphery
Say
0111
0114
12.10
Code
Description
Details of cost for 4 holes of 0.72 metre
diameter i.e. 9.05 metre periphery
Labour:
Carpenter 1 st class
Beldar
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost for 9.05 metres
Cost for 1.00 metre of periphery
Say
0111
0114
12.11:
Code
1008
2205
Extra for providing and fixing wind ties of 40x 6mm flat iron s
Description
Extra for providing and fixing wind ties of
40x6mm flat iron section.
M.S. flat 40x6mm = 30 metres+
wastage @ 5% = 1.5 metres
= 31.50 metres @ 1.9 Kg per metre
= 59.85 Kg. = 0.5985 quintal
Flats upto 10 mm in thickness
Carriage of sheet
532
Unit
Quantity
Rate
Amount
54889.08
548.89
55437.97
8315.70
63753.67
294.96
294.95
Quantity
Rate
Amount
Day
Day
0.12
0.12
151.50
135.25
18.18
16.23
34.41
0.34
34.75
5.21
39.96
13.32
13.30
Quantity
Rate
Amount
Day
Day
1.00
1.00
151.50
135.25
151.50
135.25
286.75
2.87
289.62
43.44
333.06
36.80
36.80
Unit
Quantity
Rate
Amount
quintal
tonne
0.5985
0.06
2 900.00
47.29
1 735.65
2.84
Code
9999
0102
0114
Description
Sundries
Blacksmith first class
Beldar
TOTAL
Add 1% for water charges
TOTAL
Add 15% forcontractors profit and overheads
Cost of 30.00 metres
Cost of 1.00 metre
Say
12.12
12.12.1
Code
0225
9999
9999
0130
0112
0114
12.12 :
12.12.2 :
Code
Description
One piece corrugated serrated adjustable
ridges
Consider a shed of 20x10m (external
dimensions at plinth).
Length of ridges 20.2 metre
Materials:
Ridge piece required each of 1.22mm length =
19nos. +
Add 5% wastage = 0.95 No.
19.95 Nos x 1.22 = 24.339 metre
Non - Asbestos fibre cement corrugate
serrated adjustable ridge.
Carriage (The ridge is to be fixed with the
same hooks as the Sheets)
Sundries
Labour:
Mistry
Carpenter 2nd class
Beldar
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 20.20 metre
Cost of 1.00 metre
Say
Description
Plain wing adjustable ridges
Consider a shed of 20x10m (external
dimensions at plinth).
Length of ridges 20.2 metre
Materials:
533
Unit
L.S.
Day
Day
Quantity
20.67
0.50
0.50
Rate
1.00
151.50
135.25
Amount
20.67
75.75
67.62
1 902.53
19.03
1921.56
288.23
2 209.79
73.66
73.65
Unit
Quantity
Rate
Amount
metre
24.339
174.00
4 234.99
L.S.
13.52
1.00
13.52
L.S.
6.76
1.00
6.76
Day
Day
Day
0.14
0.55
1.64
151.50
141.60
135.25
21.21
77.88
221.81
4 576.17
45.76
4 621.93
693.29
5 315.22
263.13
263.15
Rate
Amount
Unit
Quantity
Code
0226
9999
9999
0130
0112
0114
12.12 :
12.12.3:
Code
0224
9999
9999
0130
0112
0114
Description
Ridge piece required each of 1.22m length =
19 nos. +
Add 5% wastage = 0.95 No.
19.95 nos x 1.22 = 24.339 metre
Non - Asbestos fibre cement plain wing
adjustable ridge.
Carriage (The ridge is to be fixed with the
same hooks as the Sheets)
Sundries
Labour:
Mistry
Carpenter 2nd class
Beldar
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 20.20 metre
Cost of 1.00 metre
Say
Description
Close fitting adjustable ridges
Consider a shed of 20x10m (external
dimensions at plinth).
Length of ridges 20.2 metre
No. of ridge pairs required, of length
1.22m each = 22.00 nos. +
Add 5% wastage =1.10 Nos.
= 23.10 nos.x 1.22= 28.182 metre
Non - Asbestos fibre cement close fitting
adjustable ridge.
Carriage
Sundries
Labour:
Mistry
Carpenter 2nd class
Beldar
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 20.20 metre
Cost of 1.00 metre
Say
534
Unit
Quantity
Rate
Amount
metre
24.339
188.00
4 575.73
L.S.
13.52
1.00
13.52
L.S.
6.76
1.00
6.76
Day
Day
Day
0.14
0.55
1.64
151.50
141.60
135.25
21.21
77.88
221.81
4 916.91
49.17
4 966.08
744.91
5 710.99
282.72
282.70
Unit
Quantity
Rate
Amount
metre
28.182
203.00
5 720.95
L.S.
L.S.
16.12
7.15
1.00
1.00
16.12
7.15
Day
Day
Day
0.14
0.55
1.64
151.50
141.60
135.25
21.21
77.88
221.81
6 065.12
60.65
6 125.77
918.87
7 044.64
348.74
348.75
12.12
12.12.4
Code
0227
9999
9999
0130
0112
0114
12.13 :
12.13.1:
Code
0228
9999
9999
0130
0112
0114
Description
Unserrated adjustable hips
Consider a shed with hip as 20.2 metres
No. of hi pieces required = 19 pairs
Length of each pair 1.22 metres
Add 5 % wastage
= 0.95 pairs
= 19.95 pairs x 1.22 = 24.339 metre
Non - Asbestos fibre cement unserrated
adjustable ridge for hips.
Carriage
Sundries
Labour:
Mistry
Carpenter 2nd class
Beldar
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 20.20 metre
Cost of 1.00 metre
Say
L.S.
L.S.
Description
Details for shed of 20.2 metres completed
length
Materials:
Corrugated appron pieces of 1.12 metre
length = 20 nos.+
Add 5% wastage = 1.0 No.
= 21 nos.x 1.12=23.52 metre
Non - Asbestos fibre cement corrugated
appron piece.
Carriage of appron pieces. (The appron pieces
are to be fixed with the same hooks as the
sheets)
Sundries
Labour:
Mistry
Carpenter 2nd class
Beldar
TOTAL
Add 1 % for water charges
TOTAL
L.S.
535
Unit
Quantity
Rate
Amount
metre
24.339
195.00
4 746.10
6.76
6.63
1.00
1.00
6.76
6.63
0.14
0.55
1.64
151.50
141.60
135.25
21.21
77.88
221.81
5 080.39
50.80
5 131.19
769.68
5 900.87
292.12
292.10
Day
Day
Day
Quantity
Rate
Amount
metre
23.52
126.00
2 963.52
3.25
1.00
3.25
L.S.
3.25
1.00
3.25
Day
Day
Day
0.07
0.28
0.82
151.50
141.60
135.25
10.60
39.65
110.90
3 131.17
31.31
3 162.48
Code
Description
Add. 15% for contractors profit and overheads
Cost of 20.20 metre
Cost of 1.00 metre
Say
12.13 :
12.13.2 :
Code
0229
9999
9999
0130
0112
0114
12.13 :
12.13.3:
Code
0230
Description
536
Unit
Quantity
Rate
Amount
474.37
3 636.85
180.04
180.05
Quantity
Rate
Amount
No
L.S.
21.00
3.25
93.00
1.00
1953.00
3.25
L.S.
3.25
1.00
3.25
Day
Day
Day
0.07
0.28
0.82
151.50
141.60
135.25
10.60
39.65
110.90
2120.65
21.21
2141.86
321.28
2463.14
121.94
121.95
Unit
Quantity
Rate
Amount
metre
21.336
197.00
4 203.19
Code
1023
1209
1208
9999
9999
0130
0112
0114
12.13:
12.13.4 :
Code
0231
1023
1209
1208
9999
9999
0130
0112
0114
Description
G.I. J or L hooks with nuts and bolts 8 mm dia
Bitumen washers
Bitumen washers thick
Carriage of hooks, nuts, washers and curves
Sundries
Labour:
Mistry
Carpenter 2nd class
Beldar
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 20.20 metre
Cost of 1.00 metre
Say
L.S.
Description
Details of ventilator curve 20.2 metres long
complete length
Materials:
North light curves of 1.016 metres
nominal length = 20 nos. +
Add 5% wastage = 1.0 No.
= 21 nos.x 1.016 = 21.336 metre
Non - Asbestos fibre cement ventilator curves.
G.I. J or L hooks with nuts and bolts 8 mm dia
Bitumen washers
Bitumen washers thick
Carriage of hooks, nuts, washers and curves
Sundries
Labour:
Mistry
Carpenter 2nd class
Beldar
TOTAL
Add 1% for water charges
TOTAL
Add 10% for contractors profit and overheads
Cost of 20.20 metre
Cost of 1.00 metre
Say
537
Unit
10 Nos
100 Nos
100 Nos
L.S.
Quantity
40.00
40.00
40.00
9.88
6.24
Rate
58.00
27.00
18.00
1.00
1.00
Amount
232.00
10.80
7.20
9.88
6.24
Day
Day
Day
0.10
0.30
1.00
151.50
141.60
135.25
15.15
42.48
135.25
4 662.19
46.62
4 708.81
706.32
5415.13
268.08
268.10
Unit
Quantity
Rate
Amount
each
10 Nos
100 Nos
100 Nos
L.S.
L.S.
21.34
40.00
40.00
40.00
9.88
6.24
267.00
58.00
27.00
18.00
1.00
1.00
5 696.71
232.00
10.80
7.20
9.88
6.24
Day
Day
Day
0.10
0.30
1.00
151.50
141.60
135.25
15.15
42.48
135.25
6 155.71
61.56
6 217.27
932.59
7 149.86
353.95
353.95
12.13 :
12.13.5:
Code
0232
0222
1211
1208
9999
9999
0130
0112
0114
12.13 :
12.13.6 :
Code
0233
9999
538
Unit
Quantity
Rate
Amount
metre
10.50
232.00
2436.00
10 Nos
100 Nos
100 Nos
L.S.
5.00
10.00
5.00
9.36
30.00
21.00
18.00
1.00
15.00
2.10
0.90
9.36
L.S.
6.76
1.00
6.76
Day
Day
Day
0.04
0.06
0.40
151.50
141.60
135.25
6.06
8.50
54.10
2 538.78
25.39
2 564.17
384.63
2 948.80
304.00
304.00
Unit
Quantity
Rate
Amount
pair
L.S.
1.05
10.79
84.00
1.00
88.20
10.79
98.99
0.99
99.98
15.00
114.98
115.00
12.13 :
12.13.7:
Code
0234
1023
1209
1208
9999
9999
0130
0112
0114
12.13
12.13.8
Code
0235
9999
1031
1032
1208
1210
9999
9999
539
Unit
Quantity
Rate
Amount
each
21.00
275.00
5 775.00
10 Nos
100 Nos
100 Nos
L.S.
L.S.
40.00
40.00
40.00
9.88
6.24
58.00
27.00
18.00
1.00
1.00
232.00
10.80
7.20
9.88
6.24
Day
Day
Day
0.10
0.30
1.00
151.50
141.60
135.25
15.15
42.48
135.25
6 234.00
62.34
6 296.34
944.45
7 240.79
362.04
362.05
Unit
Quantity
Rate
Amount
each
1.00
each
5.25
10.79
6.00
161.00
1.00
13.00
845.25
10.79
78.00
each
6.00
9.00
54.00
100 Nos
100 Nos
L.S.
L.S.
18.00
36.00
2.73
13.39
18.00
20.00
1.00
1.00
3.24
7.20
2.73
13.39
Code
0111
0114
Description
Carpenter 1st class
Beldar
0102
12.14
Code
1008
1025
1024
1210
9999
0102
0114
12.15:
12.15.1:
Code
0309
0771
0370
2211
0982
2203
0114
0131
Description
Detail of cost for 20 metre
Material:
Flat 5 0x3 mm size
Fits upto 10 mm in thickness
M.S. bolts 6 mm dia and 25 mm long with
hexagonal head
Galvanised steel bolts and nuts 10 mm dia and
125 mm long
G.I. plain washers thin
Sundries
Blacksmith 1st class
Beldar
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 20.00 metres
Cost of 1.00 metre
Say
Description
Details of cost for 10 Sqm.
Materials:
Cost of Bitumen 80/100
Cost of kerosene oil
Cost of fuel for heating (steam coal)
Carriage of bitumen 80/100
Coarse sand
Carriage of coarse sand
Labour:
Beldar (for cleaning the surface, applying
kerosene oil, heating materials and carrying th
hot tar over the roof)
Painter
540
Unit
Day
Day
Quantity
1.00
1.00
Rate
151.50
135.25
Day
0.12
151.50
iding flat iron brackets 50x3mm size with necessary bolts, nuts and washers
for fixing asbestos cement/G.S. sheets gutters with purlins.
Unit
Quantity
Rate
quintal
10 Nos
0.1163
38.00
2 900.00
18.00
each
19.00
7.00
in washers thin
100 Nos
L.S.
19.00
1.04
20.00
1.00
Day
Day
0.38
0.38
151.50
135.25
o 10 mm in thickness
olts 6 mm dia and 25 mm long with
ting top of roofs with bitumen of approved quality at 17kg per 10 sqm
egnated with a coat of coarse sand at 60 cudm per 10 sqm including cleaning
slab surface with brushes and finally with a piece of cloth lightly soaked in
sene oil complete :
e petroleum bitumen of penetration 80/100
Unit
Quantity
Rate
tonne
litre
quintal
tonne
cum
cum
0.017
1.22
0.035
0.017
0.017
0.06
22500.00
19.00
300.00
53.21
600.00
53.21
Day
0.38
135.25
Day
0.15
141.60
Bitumen 80/100
kerosene oil
fuel for heating (steam coal)
e of bitumen 80/100
e of coarse sand
Amount
151.50
135.25
18.18
1 319.53
13.20
1 332.73
199.91
1 532.64
175.36
175.35
nd washers
Amount
337.27
68.40
-133.00
3.80
1.04
57.57
51.40
386.48
3.86
390.34
58.55
448.89
22.44
22.45
ing cleaning
oaked in
Amount
382.50
23.18
10.50
0.90
36.00
3.19
51.40
21.24
Code
9999
12.16 :
12.16.1:
Code
0811
2131
0308
9999
9999
9999
1984
2207
1213
9999
0124
0114
0101
Description
Sundries (Brushes and T and P)
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 10.00 sqm.
Cost of 1 Sqm.
Say
Description
Details of cost for 10.00sqm.
Materials:
Mud Phuska = 1.048 cum. +
Wastage 20% = 0.209
= 1.257 cum.
Mud Phuska
Mud morta for 25 mm thick plaster over
phuska
Bhusa 0.263x35 = 9.20 +
5% wastage = 0.46
= 9.66 Kg.
Bhusa say 0.10 qiuntal
Cowdung
Mud mortar for gobri leaping
Carriage of bhusa and cowdung
Tile bricks 22.9x11.4x4.4cm of designation
100
Carriage of tiles
Cement mortar for grouting 1:3 (1 cemerit 3
fine sand)
Rate as for item No. 3.3
Integral water proofing compound 2% by
weight of cement
Sundries
Labour:
Mason 2nd class
Beldar
Bhisti
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 10.00 sqm.
Cost of 1 Sqm.
Say
541
Unit
Quantity
Rate
Amount
L.S.
13.52
1.00
13.52
542.43
5.42
547.85
82.18
630.03
63.00
63.00
Unit
Quantity
Rate
Amount
cum
cum
1.257
0.263
20.00
156.85
25.14
41.25
quintal
L.S.
L.S.
L.S.
1000 Nos
0.10
5.33
8.06
2.73
380.00
200.00
1.00
1.00
1.00
1950.00
20.00
5.33
8.06
2.73
741.00
1000 Nos
cum
380.00
0.06
85.13
2870.00
32.35
175.07
kilogram
0.006
20.00
0.12
L.S.
6.76
1.00
6.76
Day
Day
Day
1.30
3.75
1.10
141.60
135.25
138.45
184.08
507.19
152.30
1901.38
19.01
1920.39
288.06
2208.45
220.85
220.85
12.17
12.17.1
Code
0811
2131
0308
9999
9999
9999
7904
2207
2107
1213
9999
0124
0114
0101
12.18
Code
542
Quantity
Rate
Amount
cum
cum
1.257
0.263
20.00
156.85
25.14
41.25
quintal
L.S.
L.S.
L.S.
1 000
Nos
1 000 Nos
cum
0.10
5.33
8.06
2.73
380.00
200.00
1.00
1.00
1.00
2717.00
20.00
5.33
8.06
2.73
1 032.46
85.13
0.06
380.00
2870.00
32.35
175.07
kilogram
0.006
20.00
0.12
L.S.
6.76
1.00
6.76
Day
Day
Day
1.30
3.75
1.10
141.60
135.25
138.45
184.08
507.19
152.30
2192.84
21.93
2 214.77
332.22
2 546.99
254.70
254.70
Unit
Quantity
Rate
Amount
Code
Description
0811
0114
0101
9999
for 10 cm thickness.
Mud Phuska = 1.048 cum. +
Wastage 20% = 0.209
= 1.257
Quantity for ICM thickness 1.257/10=0.1257
Say 0.13 cum
Mud
Beldar
Bhisti
Labour for leaping and carring to roof
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 10.00 sqm.
Cost of 1 Sqm.
Say
12.19
12.19.1
Code
1984
2207
1213
0124
0115
0101
9999
Description
543
Unit
Quantity
Rate
Amount
cum
cum
Day
L.S.
0.13
0.07
0.04
26.91
20.00
135.25
138.45
1.00
2.60
9.47
5.54
26.91
44.52
0.45
44.97
6.75
51.72
5.17
5.15
Unit
Quantity
Rate
Amount
1 000
Nos
1 000
Nos
cum
380.00
1950.00
741.00
380.00
85.13
32.35
0.179
2870.00
513.73
kilogram
0.005
20.00
0.10
Day
Day
Day
L.S.
0.81
1.08
0.27
1.82
141.60
135.25
138.45
1.00
114.70
146.07
37.38
1.82
1 587.15
15.87
1 603.02
240.45
1 843.47
184.35
184.35
544
12.2
Providing and laying pressed clay tiles (as per approved patte
thickness and of approved size) on roofs jointed with cement
coarse sand) mixed with 2% integral water proofing compoun
mm thick cement mortar 1:4(1 cement: 4 coarse sand) and fin
Code
Description
Details of cost for 10 sqm.
Materials
Manglore tiles/Pressed clay Tiles)
Carriage of tiles
Cement mortar 1:4 (l cement: 4 coarse sand)
(Rate as per of No 3.9.)
Integral water proofing compound 2% by
weight of cement
Cement mortar 1:4 (1 cement: 4 coarse sand)
(Rate as per item No 3.9)
Labour
Mason 1 st class
Beldar
Sundries
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 10.00 sqm.
Cost of 1 Sqm.
Say
7266
2207
1213
0123
0114
9999
12.21
12.21.1
Code
0291
2202
0982
2203
0367
2209
0114
0115
0101
0123
0124
0128
9999
9999
123
0124
9999
0123
0124
0114
9999
Unit
1000 Nos
1000 Nos
cum
kilogram
cum
Day
Day
L.S.
Unit
cum
cum
cum
cum
tonne
tonne
Day
Day
Day
Day
Day
Day
L.S.
L.S.
Day
Day
L.S.
Day
Day
Day
L.S.
160.00
160.00
0.37
0.01
0.20
0.60
2.60
13.00
Rate
Amount
8 900.00
85.13
2578.45
1424.00
13.62
954.03
20.00
0.20
2 578.45
515.69
151.50
135.25
1.00
90.90
351.65
13.00
3 363.09
33.63
3 396.72
509.51
3 906.23
390.62
390.60
Rate
Amount
700.00
58.52
53.21
600.00
53.21
4500.00
47.29
135.25
135.25
138.45
151.50
141.60
138.45
1.00
1.00
151.50
141.60
1.00
151.50
141.60
135.25
1.00
4.45
25.08
2.22
135.00
1.42
11.50
7.57
3.46
0.76
0.71
0.51
2.47
1.30
22.72
21.24
5.07
37.88
35.40
135.25
8.06
Code
0155
0115
0101
9999
9999
Description
Cement mortar for grouting 1:3 (1 cement: 3
fine sand) (Rate as per item No. 3.3)
Mason
Coolie
Bhisti
Hire and running charges of mechanical mixer
Sundries
TOTAL
Add 1% for water charges
TOTAL
Add 15% fof contractors profit and overheads
Cost of 10.00 metre
Cost of 1.00 metre
Say
545
Unit
cum
Day
Day
Day
L.S.
L.S.
12.22
Code
Description
Details of cost for 1 no.
Stone Aggregate (Single size): 20 mm
nominal size
Stone Aggregate (Single size): 10 mm
nominal size
Carriage of Stone Aggregate below 40 mm
nominal size
Coarse sand
Carriage of coarse sand
Portland cement
Carriage of cement
Beldar
Coolie
Bhisti
Mason 1 st class
Mason 2nd class
Mate
Hire and running charge of mechanical mixer
Sundries
PVC sheet 400 micron thick
Cement mortar 1:3 (1 cement :3 coarse sand)
(Rate as per item No. 3.8)
Mason
Coolie
Bhisti
Sundries
Portland cement
Carriage of cement
Mason
Coolie
Rounding of edges and making outlet
Sundries
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 1 no.
0295
0297
2202
0982
2203
0367
2209
0114
0115
0101
0123
0124
0128
9999
9999
3002
0155
0115
0101
9999
0367
2209
0155
0115
9999
9999
Unit
cum
cum
cum
cum
cum
tonne
tonne
Day
Day
Day
Day
Day
Day
L.S.
L.S.
sqm
cum
Day
Day
Day
L.S.
tonne
tonne
Day
Day
L.S.
L.S.
Say
Quantity
0.009
0.081
0.101
0.033
1.69
1.43
Rate
2 870.00
Amount
25.83
146.55
135.25
138.45
1.00
1.00
11.87
13.66
4.57
1.69
1.43
579.64
5.80
585.44
87.82
673.26
67.33
67.35
Rate
Amount
700.00
4.69
700.00
1.54
53.21
0.47
600.00
53.21
4500.00
47.29
135.25
135.25
138.45
151.50
141.60
138.45
1.00
1.00
26.00
3169.60
2.64
0.23
14.40
0.15
1.22
0.81
0.37
0.08
0.07
0.06
0.26
0.13
26.00
13.00
146.55
135.25
138.45
1.00
4500.00
47.29
146.55
135.25
1.00
1.00
3.44
3.18
1.08
0.39
2.70
0.03
1.17
1.08
0.26
13.52
92.97
0.93
93.90
14.08
107.98
108.00
12.23
12.23.1
12.23.1.1
Code
0155
0100
0115
0101
Description
12.23 Providing sand stone slab for roofing and laying them in cemen
cement: 4 coarse sand) over wooden karries or R.C.C. battens (
battens to be paid separately) including pointing the ceiling joi
mortar 1:3 (1 cement: 3 fine sand ) complete :
White sand stone slab :
12.23.2
12.23.2.1
40 to 50 mm thick
Code
1175
2216
2113
0155
0100
0115
0101
9999
Description
Details of cost for 10 sqm.
Materials :
Stone Slab including wastage @ 10% = 11sqm
Carriage of slab
Cement mortar 1:4 (1 cement: 4 coarse sand)
(Rate as per item No. 3.9)
Mason
Bandhani
Coolie
Bhisti
Sundries
Cement mortar for grouting 1:3(1 cement: 3
fine sand)
Rate as per item No. 3.3
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 10.00 sqm.
Cost of 1 Sqm.
Say
546
Unit
Quantity
Rate
Amount
sqm
tonne
cum
11.00
1.27
0.0095
145.00
47.29
2 578.00
1 595.00
60.06
24.50
cum
0.0075
2 870.00
21.52
Day
Day
Day
Day
L.S.
1.52
1.82
1.52
0.30
16.12
146.65
138.45
135.25
138.45
1.00
222.76
41.54
205.58
41.54
16.52
2439.06
24.39
2463.45
369.52
2832.97
283.30
283.30
Rate
Amount
Unit
Quantity
sqm
tonne
cum
11.00
1.27
160.00
47.29
0.0095 2578.45
1760.00
60.06
24.50
Day
Day
Day
Day
L.S.
cum
1.52
1.82
1.52
0.30
16.12
146.55
138.45
135.25
138.45
1.00
0.0075 2870.00
222.76
251.98
205.58
41.54
16.12
21.52
2604.06
26.04
2630.10
394.52
3024.62
302.46
302.45
12.24
12.24.1
12.24.1.1
Code
Description
Details of cost for 10sqm.
Material :Insulating board including 10% wastage =
11.00Sqm.
Carriage of material
Nails
Labour:
Carpenter 1st class
Beldar
Scaffolding
Sundries
TOTAL
Add 15% for water charges
TOTAL
Add 10% for contractors profit and overhea
Cost of 10.00 sqm.
Cost of 1.00 sqm.
Say
0332
9999
9999
0114
9999
9999
12.24
12.24.2
12.24.2.1
Code
0328
9999
9999
0111
0114
9999
9999
Description
Details of cost for 10sqm.
Material :White face insulating board 12 mm thick i/c
10% wastage 11 Sqm.
Carriage of material
Nails
Labour:
Carpenter 1st class
Beldar
Scaffolding
Sundries
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overhea
Cost of 10.00 sqm.
Cost of 1.00 sqm.
Say
547
iding and fixing insulating board ceiling of approved quality with necessary
etc. complete (framework to be paid separately):
ral colour insulating board
Unit
Quantity
Rate
sqm
11.00
175.00
L.S.
L.S.
17.55
26.91
1.00
1.00
Day
Day
L.S.
L.S.
2.50
2.00
31.07
31.07
151.50
135.25
1.00
1.00
e of material
iding and fixing insulating board ceiling of approved quality with necessary
etc. complete (frame work to be paid separately):
e face insulating board
Unit
Quantity
Rate
sqm
11.00
239.00
L.S.
L.S
17.55
26.91
1.00
1.00
Day
Day
L.S
L.S
2.50
2.00
31.07
31.07
151.50
135.25
1.00
1.00
necessary
Amount
1925.00
17.55
26.91
378.75
270.50
31.07
31.07
2680.85
26.81
2707.66
406.15
3113.81
311.38
311.40
necessary
Amount
2629.00
17.55
26.91
378.75
270.50
31.07
31.07
3384.85
33.85
3418.70
512.80
3931.50
393.15
393.15
12.24
12.24.3
12.24.3.1
Code
0336
9999
9999
0111
0114
9999
9999
12.25
12.25.1
Code
0341
9999
9999
0111
0114
9999
9999
548
Unit
Quantity
Rate
Amount
sqm
11.00
208.00
2288.00
L.S.
L.S.
17.55
26.91
1.00
1.00
17.55
26.91
Day
Day
L.S.
L.S.
2.50
2.00
31.07
31.07
151.50
135.25
1.00
1.00
378.75
270.50
31.07
31.07
3043.85
30.44
3074.29
461.14
3535.43
353.54
353.55
Unit
Quantity
Rate
Amount
sqm
11.00
Sqm
2838.00
L.S.
L.S.
14.95
26.91
1.00
1.00
14.95
26.91
Day
Day
L.S.
L.S.
2.50
2.00
31.07
31.07
151.50
135.25
1.00
1.00
378.75
270.50
31.07
31.07
3591.25
35.91
3627.16
544.07
4171.23
417.12
417.10
12.26
12.26.1
Code
0236
9999
9999
0111
0114
9999
9999
12.27
12.27.1
Code
Description
Details of cost for 10 holes
Materials :0.5 metre dia. each = 10x22/7x0.5=15.71m
Area = 10x(22/7)/4x0.5x0.5 = 1.96sqm. +
Wastage @ 10% = 0.19 sqm.
= 2.15 sqm.
Teak wood 2nd class
Carriage
M.S. screws 40 mm long
Labour:
Carpenter 1 st class
Carpenter 2nd class
Beldar
Scaffolding
Sundries
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 15.71 metre
Cost of 1.00 metre
Say
1190
2204
0637
0111
0112
0114
9999
9999
549
Unit
Quantity
Rate
Amount
sqm
11.00
180.00
1980.00
L.S.
L.S.
14.95
26.91
1.00
1.00
14.95
26.91
Day
Day
L.S.
L.S.
2.50
2.00
31.07
31.07
151.50
135.25
1.00
1.00
378.75
270.50
31.07
31.07
2733.25
27.33
2760.58
414.09
3174.67
317.47
317.45
Unit
Quantity
Rate
Amount
10 cudm
cum
100 Nos
41.16
0.04
31.00
410.00
60.81
30.00
1 687.56
2.49
9.30
Day
Day .
Day
L.S.
L.S.
2.65
0.15
2.79
7.80
14.69
151.50
141.60
135.25
1.00
1.00
401.48
20.53
377.35
7.80
14.69
2521.20
25.21
2546.41
381.96
2928.37
186.40
186.40
ceiling with:
12.27
12.27.2
12.27.2.1
Code
0332
9999
9999
0111
0114
9999
9999
0111
0114
9999
12.27
12.27.3
12.27.3.1
Code
0328
9999
9999
0111
0114
9999
9999
0111
0114
9999
Description
Details of cost for 15.71 metre
Materials :0.5 metre dia. each = 10x22/7x0.5=15.71m
Area= 10x(22/7)/4x0.5x0.5 = 1.96sqm. +
Wastage @ 10% = 0.19 sqm.
= 2.15 sqm.
Insulating board
Carriage
NailsLabour:
Carpenter 1st class
Beldar
Scaffolding
Sundries
Carpenter 1st class
Beldar
Scaffolding
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 15.71 metre
Cost of 1.00 metre
Say
550
ceiling with:
Unit
Quantity
Rate
Amount
sqm
L.S.
L.S.
2.15
3.38
5.33
175.00
1.00
1.00
376.25
3.38
5.33
Day
Day
L.S.
L.S.
Day
Day
L.S.
0.49
0.39
6.11
6.11
2.50
2.50
10.79
151.50
135.25
1.00
1.00
151.50
135.25
1.00
74.24
52.75
6.11
6.11
378.75
338.12
10.79
1251.83
12.52
1 264.35
189.65
1 454.00
92.55
92.55
Unit
Quantity
Rate
Amount
sqm
L.S.
L.S.
2.15
3.38
5.33
239.00
1.00
1.00
513.85
3.38
5.33
Day
Day
L.S.
L.S.
Day
Day
L.S.
0.49
0.39
6.11
6.11
2.50
2.50
10.79
151.50
135.25
1.00
1.00
151.50
135.25
1.00
74.24
52.75
6.11
6.11
378.75
338.12
10.79
1389.43
13.89
1403.32
210.50
1613.82
102.73
102.75
ceiling with:
12.27
12.27.4
12.27.4.1
Code
0336
9999
9999
0111
0114
9999
9999
0111
0114
9999
12.27
12.27.5
12.27.5.1
Code
0994
9999
9999
0111
0114
9999
9999
0111
0114
9999
Description
Details of cost for 15.71 metre
Materials :0.5 metre dia. each = 10x22/7x0.5=15.71m
Area= 10x(22/7)/4x0.5x0.5 = 1.96sqm. +
Wastage @ 10% = 0.19 sqm.
= 2.15 sqm.
Insulating board
Carriage
NailsLabour:
Carpenter 1st class
Beldar
Scaffolding
Sundries
Carpenter 1 st class
Beldar
Scaffolding
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 15.71 metre
Cost of 1.00 metre
Say
Description
Details of cost for 15.71 metre
Materials :0.5 metre dia. each = 10x22/7x0.5= 15.71m
Area= 10x(22/7)/4x0.5x0.5 = 1.96sqm. +
Wastage @ 10% = 0.19 sqm.
= 2.15 sqm.
Insulating board
Carriage
NailsLabour:
Carpenter 1 st class
Beldar
Scaffolding
Sundries
Carpenter 1st class
Beldar
Scaffolding
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 15.71 metre
Cost of 1.00 metre
Say
551
ceiling with:
Unit
Quantity
Rate
Amount
sqm
L.S.
L.S.
2.15
3.38
5.33
208.00
1.00
1.00
447.20
3.38
5.33
Day
Day
L.S.
L.S.
Day
Day
L.S.
0.49
0.39
6.11
6.11
2.50
2.50
10.79
151.50
135.25
1.00
1.00
151.50
135.25
1.00
74.24
52.75
6.11
6.11
378.75
338.12
10.79
1322.78
13.23
1336.01
200.40
1536.41
97.80
97.80
Unit
Quantity
Rate
Amount
sqm
L.S.
L.S.
2.15
2.73
5.33
103.00
1.00
1.00
221.45
2.73
5.33
Day
Day
L.S.
L.S.
Day
Day
L.S.
0.49
0.39
6.11
6.11
2.50
2.50
10.79
151.50
135.25
1.00
1.00
151.50
135.25
1.00
74.24
52.75
6.11
6.11
378.75
338.12
10.79
1096.38
10.96
1107.34
166.10
1273.44
81.06
81.05
ceiling with:
12.27
12.27.5
12.27.5.2
Code
0996
9999
9999
0111
0114
9999
9999
0111
0114
9999
12.28
Code
0111
0112
0114
12.29
Description
Details of cost for 15.71 metre
Materials :0.5 metre dia. each = 10x22/7x0.5=15.71m
Area= 10x(22/7)/4x0.5x0.5 = 1.96sqm. +
Wastage @ 10% = 0.19 sqm.
= 2.15 sqm.
Insulating board
Carriage
NailsLabour:
Carpenter 1 st class
Beldar
Scaffolding
Sundries
Carpenter 1 st class
Beldar
Scaffolding
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 15.71 metre
Cost of 1.00 metre
Say
Description
Details of cost for 10 sqm.
Labour:
Carpenter 1 st class
Carpenter 2nd class
Beldar
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 10.00 sqm.
Cost of 1.00 sqm.
Say
552
e in ceiling with:
Unit
Quantity
Rate
Amount
sqm
L.S.
L.S.
2.15
2.86
5.33
120.00
1.00
1.00
258.00
2.86
5.33
Day
Day
L.S.
L.S.
Day
Day
L.S.
0.49
0.39
10.79
6.11
2.50
2.50
10.79
151.50
135.25
1.00
1.00
151.50
135.25
1.00
74.24
52.75
6.11
6.11
378.75
338.12
10.79
1 133.06
11.33
1 144.39
171.66
1316.05
83.77
83.75
Quantity
Rate
Amount
Day
Day,
Day
1.00
1.00
2.00
151.50
141.60
135.25
151.50
141.60
270.50
563.60
5.64
569.24
85.39
654.63
65.46
65.45
Code
7267
9999
9999
0111
0114
9999
9999
Description
Details of cost for 10.00 sqm.
Materials :Plain ceiling tiles 600x600x12 mm thick ,
Area including 10% wastage = 11.00 sqm
Carriage of tiles
C.P. brase screws
Labour:
Carpenter 1 st class
Beldar
Scaffolding
Sundries
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 10.00 sqm.
Cost of 1.00 sqm.
Say
12.30
Code
Description
Details of cost for 10 sqm.
Cost of 3 mm thick translucent white acrylic
plastic sheet
Cost of 12mm thick plain particle board ceiling tile
Difference of cost
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 10.00 sqm.
Cost of 1.00 sqm.
Say
7385
7386
12.31
12.31.1
Code
1196
2204
1219
Description
Details of cost for 4.00x2.5=10sqm.
Materials :Wooden strips of 1 st class kail wood
72x40x0.25x0.06 = 43.20 cudm. +
Add 10% wastage = 4.32 cudm.
= 47.52
Kail wood 1 st class
Carriage of timber
Nail required for fixing the laths to frame
work including breakage and wastage of nails
Rabbit wire mesh required for reinforcement
553
Unit
Quantity
Rate
Amount
each
11.00
90.00
990.00
L.S.
L.S.
14.82
26.91
1.00
1.00
14.82
26.91
Day
Day
L.S.
L.S.
2.50
2.00
31.07
31.07
151.50
135.25
1.00
1.00
378.75
270.50
31.07
31.07
1743.12
17.43
1760.55
264.08
2024.63
202.46
202.45
Quantity
Rate
Amount
sqm
10.00
515.00
5150.00
sqm
10.00
225.00
-2250.00
2900.00
29.00
2929.00
439.35
3368.35
336.84
336.85
Unit
Quantity
Rate
Amount
10 cudm
cum
kilogram
47.52
0.0475
0.75
186.00
60.81
40.00
883.87
2.89
30.00
Code
1220
0869
2308
9999
0111
0114
0122
0114
0l0l
9999
9999
12.31
12.31.2
Code
1196
2204
1219
1220
Description
=2.5x4 = 10.00sqm.+
Add 2%wastage =0.20 sqm.
= 10.2 sqm.
Rabbit wire mesh
Plaster of paris 2.5x4.0x10x1121/1000= 112.10 kg.
Add for plaster of paris joining into the side of
the laths2.5x4.0x4.0032x1121 = 44.87 kg.
= 156.97+
Add 40% wastage = 62.79
= 219.76
Plaster of Paris
Carriage of Plaster of Paris
Carriage of wiremesh and nails etc.
Labour:
Carpenter 1st class
Beldar
For doing plaster of paris over wooden strips
Mason
Beldar
Bhisti
Scaffolding
Sundries
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 10.00 sqm.
Cost of 1.00 sqm.
Say
554
Unit
Quantity
Rate
Amount
sqm
10.20
38.00
387.60
kilogram
tonne
L.S.
219.76
0.22
2.73
2.50
47.29
1.00
549.40
10.40
2.73
Day
Day
1.60
1.60
151.50
135.25
242.40
216.40
Day
Day
Day
L.S.
L.S.
3.23
3.23
0.54
83.98
53.82
151.50
151.50
138.45
1.00
1.00
489.34
436.86
74.76
83.98
53.82
3464.45
34.64
3499.09
524.86
4023.95
402.40
402.40
Unit
Quantity
Rate
Amount
10 cudm
cum
kilogram
47.52
0.0475
0.75
186.00
60.81
40.00
883.87
2.89
30.00
Sqm
10.20
38.00
387.60
Code
0869
2308
9999
0111
0114
0122
0114
0101
9999
9999
0111
0122
0114
Description
Plaster of paris 2.5x4.0x10x1121/1000= 112.10 kg.
Add for plaster of paris joining into the side of
the laths2.5x4.0x4.0032x1121 = 44.87 kg.
= 156.97+
Add 40% wastage = 62.79
= 219.76
Plaster of Paris
Carriage of Plaster of Paris
Carriage of wiremesh and nails etc.
Labour:
Carpenter Ist class
Beldar
Mason
Beldar
Bhisti
Scaffolding
Sundries
Carpenter Ist class
Mason
Beldar
TOTAL
Add 1% for water charges
TOTAL
Add 15% for centractors profit and overheads
Cost of 10.00 sqm.
Cost of 1.00 sqm.
Say
12.32
Code
Description
Details of cost for 10 sqm.
Plaster of Paris
Carriage of Plaster of Paris
Labour:
Mason
Beldar
Bhisti
Scaffolding and Sundries
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 10.00 sqm.
Cost of 1.00 sqm.
Say
0869
2308
0122
0114
0101
9999
555
Unit
Quantity
Rate
Amount
kilogram
tonne
L.S.
219.76
0.22
2.73
2.50
47.29
1.00
549.40
10.40
2.73
Day
Day
Day
Day
Day
L.S.
L.S.
1.60
1.60
3.23
3.23
0.54
83.98
53.82
151.50
135.25
151.50
135.25
138.45
1.00
1.00
242.40
216.40
489.34
436.86
74.76
83.98
53.82
Day
Day
Day
0.50
1.00
1.50
151.50
151.50
135.25
75.75
151.00
202.88
3894.58
38.95
3933.53
590.03
4523.56
452.36
452.35
Quantity
Rate
Amount
kilogram
tonne
109.88
0.11
2.50
47.29
274.70
5.20
Day
Day
Day
L.S.
2.00
2.00
0.25
13.52
151.50
135.25
138.45
1.00
303.00
270.50
34.61
13.52
901.53
9.02
910.55
136.58
1047.13
104.71
104.70
12.33
Code
Description
Details of cost for l0sqm/metre height
Scaffolding
Labour:
Mason
Beldar
Bhisti
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of.10.00sqm / metre height
Cost of 1.00 sqm. / metre height
9999
0122
0114
0101
12.34
Code
Description
Details of cost for 10.00sqm.
Area for 10.00sqm. (Finished surface) =
10.00sqm.+
Add 10% for overlappings & wastage =
1.00sqm.
= 11.00sqm.
7232
9999
9999
0111
0114
12.35
Code
Description
Details of cost for 10.00sqm.
Area for 10.00sqm. (Finished surface) =
10.00sqm.+
Add 10% for overlappings & wastage =
1.00sqm.
= 11.00sqm.
7231
556
Quantity
Rate
Amount
L.S.
13.52
1.00
13.52
Day
Day
Day
1.00
1.00
0.25
151.50
135.25
138.45
151.50
135.25
34.61
334.88
3.35
338.23
50.73
388.96
38.90
Quantity
Rate
Amount
Sqm
L.S.
11.00
104.00
163.00
1.00
1793.00
104.00
L.S.
351.00
1.00
351.00
Day
Day
1.00
2.00
151.50
135.25
151.50
270.50
2670.00
26.70
2696.70
404.50
3101.20
310.12
310.10
Quantity
Rate
Amount
sqm
11.00
114.00
1254.00
Code
9999
0111
0114
12.36
12.36.1
Code
7090
0314
9999
0111
0114
12.36
12.36.2
Code
7091
O14
9999
0111
0114
Description
thick
Sundries including GI wire 20 SWG and
Virgin polythene bags 200 gram
Labour:
Carpenter 1st class
Beldar
TOTAL
Add 1% for water charges
TOTAL
AAdd 15% for contractors profit and overheads
Cost for 10.00sqm.
Cost for 1sqm.
Say
Description
Details of cost for10.00sqm.
Cost of materials :
Expanded Polystyrens lx10=10.00sqm. +
Add wastage 10%= 1.00sqm.
= 11.00sqm.
Expanded polystyrene type N- Normal
Adhesive Bitumen hot sealing compound :
grade A
Sundries
Labour:
Carpenter 1st class
Beldar
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost for 10.00sqm.
Cost for 1sqm.
Say
Description
Details of cost for 10.00sqm.
Cost of materials :
Expanded Polystyrens lx10=10.00sqm. +
Add wastage 10% = 1.00sqm.
= 11.00sqm.
Expanded polystyrene type - SE
Adhesive bitumen grade A
Sundries
Labour:
Carpenter 1 st class
Beldar
TOTAL
557
Unit
Quantity
Rate
Amount
L.S.
52.00
1.00
52.00
Day
Day
0.50
0.50
151.50
135.25
75.75
67.62
1449.37
14.49
1463.86
219.58
1683.44
168.34
168.35
Quantity
Rate
Amount
sqm
kilogram
11.00
0.25
108.00
20.00
1188.00
5.00
L.S.
13.00
1.00
13.00
Day
Day
0.50
0.50
151.50
135.25
75.75
67.62
1349.37
13.49
1362.86
204.43
1567.29
156.73
156.75
ype 50 mm thick
Unit
Quantity
Rate
Amount
sqm
kilogram
L.S.
11.00
0.25
13.00
131.00
20.00
1.00
1441.00
5.00
13.00
Day
Day
0.50
0.50
151.50
135.25
75.75
67.62
1602.37
Code
Description
Add 1% for water charges
TOTAL
Add 15% forcontractors profit and overheads
Cost for 10.00sqm.
Cost for 1sqm.
Say
12.37
12.37.1
Code
3004
9999
9999
0124
0114
9999
12.38
12.38.1
Code
1331
9999
9999
0116
0124
0114
0295
0297
2202
0982
Description
Details of cost of 5 nos.
Materials :M.S. holder bat clamps = 5 nos
Sundries
C.C. block 5x0.1x0.1x0.1 = 0.005 cum
Carriage of bat clamps
Labour:
Fitter
Mason 2nd class
Beldar
Stone Aggregate 20 mm nominal size
Stone Aggregate 10 mm nominal size
Carriage of Stone Aggregate below 40 mm
nominal size
Coarse sand
558
Unit
Quantity
Rate
Amount
16.02
1618.39
242.76
1861.15
186.12
186.10
Unit
Quantity
Rate
Amount
each
L.S.
L.S.
6.00
13.52
13.52
28.00
1.00
1.00
168.00
13.52
13.52
Day
Day
L.S.
0.40
0.40
5.33
141.60
135.25
1.00
56.64
54.10
5.33
311.11
3.11
314.22
47.13
361.35
36.14
36.15
Quantity
Rate
Amount
each
L.S.
5.00
7.15
13.00
1.00
65.00
7.15
L.S.
2.47
1.00
2.47
Day
Day
Day
cum
cum
cum
0.125
0.75
0.5
0.0033
0.0011
0.0044
151.50
141.60
135.25
700.00
700.00
53.21
18.94
106.20
67.62
2.31
0.77
0.23
cum
0.0022
600.00
1.32
Code
2203
0367
2209
0114
0115
0101
0123
0124
0128
9999
9999
9999
Description
Carriage of coarse sand
Portland cement
Carriage of cement
Beldar
Coolie
Bhisti
Mason 1st class
Mason 2nd class
Mate
Hire charges of machine etc.
Sundries
Sundries
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 5.00 bat clamps
Cost of 1.00 bat clamps
Say
12.38
12.38.2
Code
0886
9999
9999
0116
0124
0114
0295
0297
2202
0982
2203
0367
2209
0114
0115
0101
0123
0124
0128
150 mm diameter
Description
Details of cost of 5 nos.
Materials :M.S. holder bat clamps = 5 nos
C.C. block 5x0.1x0.1x0.1 = 0.005 cum
Carriage of bat clamps
Sundries
Labour:
Fitter
Mason 2nd class
Beldar
Stone Aggregate 20 mm nominal size
Stone Aggregate 10 mm nominal size
Carriage of Stone Aggregate below 40 mm
nominal size
Coarse sand
Carriage of coarse sand
Portland cement
Carriage of cement
Beldar
Coolie
Bhisti
Mason 1 st class
Mason 2nd class
Mate
559
Unit
cum
tonne
tonne
Day
Day
Day
Day
Day
Day
L.S.
L.S.
L.S.
Quantity
0.0022
0.0016
0.0016
0.0045
0.0032
0.0014
0.0003
0.0003
0.0002
0.26
0.13
0.13
Rate
53.21
4500.00
47.29
135.25
135.25
138.45
151.50
141.60
138.45
1.00
1.00
1.00
Amount
0.12
7.20
0.08
0.61
0.43
0.19
0.05
0.04
0.03
0.26
0.13
0.13
281.28
2.81
284.09
42.61
326.70
65.34
65.35
Quantity
Rate
Amount
each
5.00
20.00
100.00
L.S.
L.S.
2.47
7.15
1.00
1.00
2.47
7.15
Day
Day
Day
cum
cum
cum
0.125
0.75
0.5
0.0033
0.0011
0.0044
151.50
141.60
135.25
700.00
700.00
53.21
18.94
106.20
67.62
2.31
0.77
0.23
cum
cum
tonne
tonne
Day
Day
Day
Day
Day
Day
0.0022
0.0022
0.0016
0.0016
0.0045
0.0032
0.0014
0.0003
0.0003
0.0002
600.00
53.21
4500.00
47.29
135.25
135.25
138.45
151.50
141.60
138.45
1.32
0.12
7.20
0.08
0.61
0.43
0.19
0.05
0.04
0.03
Code
9999
9999
9999
12.39
12.39.1
Code
0865
1001
9999
9999
0116
0117
0114
12.39
12.39.2
Code
0865
1001
9999
9999
0116
0117
0114
Description
Hire charges of machine etc.
Sundries
Sundries
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 5.00 bat clamps
Cost of 1.00 bat clamps
Say
Providing lead caulked joints to sand cast iron rain water pip
100mm dia. Pipe
Description
Providing lead caulked joints to sand cast iron rain water pip
150mm dia. Pipe
Description
Details of cost for one joint.
Materials:
Pig lead
Spun yarn
Kerosene oil fuel and sundries
Carriage of materials
Labour:
Fitter
Assistasnt fitter
Beldar
560
Unit
L.S.
L.S.
L.S.
Quantity
0.26
0.13
0.13
Rate
1.00
1.00
1.00
Amount
0.26
0.13
0.13
316.28
3.16
319.44
47.92
367.36
73.47
73.45
Quantity
Rate
Amount
Kilogram
Kilogram
L.S
L.S.
0.98
0.11
13.52
1.43
58.00
30.00
1.00
1.00
56.84
3.30
13.52
1.43
Day
Day
Day
0.06
0.06
0.12
151.50
141.60
135.25
9.09
8.50
16.23
108.91
1.09
110.00
16.50
126.50
126.50
Quantity
Rate
Amount
kilogram
kilogram
L.S.
L.S.
1.48
0.17
13.52
2.73
58.00
30.00
1.00
1.00
85.84
5.10
13.52
2.73
Day
Day
Day
0.08
0.08
0.15
151.50
141.60
135.25
12.12
11.33
20.29
Code
Description
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 1.00 joint.
Say
12.40
12.40.1
12.40.1.1
Code
Description
0966
9999
239.55
12.41
12.41.1
Code
7188
7190
9999
9999
0116
0114
0100
9999
561
Unit
Quantity
Rate
Amount
150.93
1.51
152.44
22.87
175.31
175.30
Unit
Quantity
Rate
Amount
each
L.S.
1.00
17.55
222.00
1.00
222.00
17.55
2.40
241.95
36.29
278.24
278.25
Quantity
Rate
Amount
metre
metre
L.S.
L.S.
6.00
1.00
13.52
6.76
58.00
14.00
1.00
1.00
348.00
14.00
13.52
6.76
Day
Day
Day
L.S.
0.19
0.37
0.08
18.59
151.50
135.25
138.45
1.00
28.78
50.04
11.08
18.59
490.77
4.91
495.68
74.35
570.03
95.01
95.00
12.41
12.41.2
Code
7189
7191
9999
9999
0116
0114
0100
9999
12.42
12.42.1
12.42.1.1
Code
7192
7190
9999
9999
562
Quantity
Rate
Amount
metre
metre
L.S.
L.S.
6.00
1.00
17.55
8.06
112.00
17.00
1.00
1.00
672.00
17.00
17.55
8.06
Day
Day
Day
L.S.
0.23
0.45
0.11
18.59
151.50
138.25
138.45
1.00
34.84
60.86
15.23
18.59
844.13
8.44
852.57
127.89
980.46
163.41
163.40
Unit
metre
metre
Quantity
1.00
2.00
Rate
30.00
17.00
Amount
30.00
28.00
L.S.
2.73
1.00
2.73
L.S
9.36
1.00
9.36
70.09
0.70
70.79
10.62
81.41
81.40
12.42
12.42.1
12.42.1.2
Code
7193
7191
9999
9999
12.42
12.42.2
12.42.2.1
Code
7194
7190
9999
9999
12.42
12.42.2
12.42.2.2
Code
7195
7191
9999
Discription
563
Unit
Quantity
Rate
Amount
each
metre
L.S
L.S
1.00
2.00
2.73
10.79
40.00
17.00
1.00
1.00
40.00
34.00
2.73
10.79
87.52
0.88
88.40
13.26
101.66
101.65
Unit
Quantity
Rate
Amount
each
metre
L.S
L.S
1.00
2.00
2.73
9.36
47.00
14.00
1.00
1.00
47.00
28.00
2.73
9.36
87.09
0.87
87.96
13.19
101.15
101.15
Unit
Quantity
Rate
Amount
each
metre
L.S
1.00
2.00
2.73
72.00
17.00
1.00
72.00
34.00
2.73
Code
9999
12.42
12.42.3
12.42.3.1
Code
7198
7190
9999
12.42
12.42.3
12.42.3.2
Code
7199
7191
9999
Discription
Carriage and fixing charges
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 1 coupler
Say
564
Unit
Quantity
Rate
Amount
L.S
10.79
1.00
10.79
119.52
1.20
120.72
18.11
138.83
138.85
Unit
Quantity
Rate
Amount
each
1.00
100.00
100.00
metre
L.S
3.00
10.76
14.00
1.00
42.00
10.76
152.76
1.53
154.29
23.14
177.43
177.45
Unit
Quantity
Rate
Amount
each
1.00
160.00
160.00
metre
L.S
3.00
13.47
17.00
1.00
51.00
13.47
224.47
2.24
226.71
34.01
260.72
260.70
12.42
12.42.4
12.42.4.1
Code
7196
7190
9999
12.42
12.42.4
12.42.4.2
Code
7197
7191
9999
12.42
12.42.5
12.42.5.1
Discription
Details of cost for 1 tee
Materials
110x110x110 mm single equal tee (without door)
including cost of bolts and nuts
Seal rings
Adhesive, Carriage of material rubber washer
etc. including fixing charges
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 1 tee
Say
565
Unit
Quantity
Rate
Amount
each
1.00
83.00
83.00
metre
L.S
3.00
10.76
14.00
1.00
42.00
10.76
135.76
1.36
137.12
20.57
157.69
157.70
Unit
Quantity
Rate
Amount
each
1.00
115.00
115.00
metre
L.S
3.00
13.47
17.00
1.00
51.00
13.47
179.47
1.79
181.26
27.19
208.45
208.45
Code
7208
7190
9999
9999
12.42
12.42.5
12.42.5.2
Code
7209
7191
9999
9999
12.42
12.42.6
12.42.6.1
Code
7212
7190
9999
9999
Discription
Details of cost for 1 bend
Cost of bend
Seal rings
Adhesive, and sundries etc.
Carriage and fixing charges
TOTAL
Add 1% for water charges
TOTAL
Add 15% forcontractors profit and overheads
Cost of 1 coupler
Say
566
Unit
Quantity
Rate
Amount
each
metre
L.S
L.S
1.00
1.00
2.73
9.36
50.00
14.00
1.00
1.00
50.00
14.00
2.73
9.36
76.09
0.76
76.85
11.53
88.38
88.40
Unit
Quantity
Rate
Amount
each
metre
L.S
L.S
1.00
1.00
2.73
10.79
85.00
17.00
1.00
1.00
85.00
17.00
2.73
10.79
115.52
1.16
116.68
17.50
134.18
134.20
Unit
Quantity
Rate
Amount
each
metre
L.S
L.S
1.00
1.00
2.73
9.36
105.00
14.00
1.00
1.00
105.00
14.00
2.73
9.36
131.09
1.31
132.40
19.86
152.26
152.25
12.42
12.42.6
12.42.6.2
Code
7213
7191
9999
9999
12.43.1
Code
Discription
12.43
7214
9999
0870
0116
0124
0114
9999
9999
9999
567
Unit
Quantity
Rate
Amount
each
metre
L.S
L.S
1.00
1.00
2.73
10.79
196.00
17.00
1.00
1.00
196.00
17.00
2.73
10.79
226.52
2.27
228.79
34.32
263.11
263.10
Unit
Quantity
Rate
Amount
each
L.S.
each
5.00
2.47
10.00
15.00
1.00
6.00
75.00
2.47
60.00
Day
Day
Day
L.S.
L.S.
L.S.
0.125
0.75
0.50
7.15
0.91
3.9
151.50
141.60
135.25
1.00
1.00
1.00
18.94
106.20
67.62
7.15
0.91
3.90
342.19
3.42
345.61
51.84
397.45
79.49
79.50
12.43.2
Code
Discription
12.43
7214
9999
0870
0116
0124
0114
9999
9999
9999
12.44
Providing and fixing to the inlet mouth of rain water pipe cas
diameter and weighing not less than 440 grams.
Code
Discription
7187
9999
12.45
568
Unit
Quantity
Rate
Amount
each
L.S.
each
5.00
2.47
10.00
30.00
1.00
6.00
150.00
2.47
60.00
Day
Day
Day
L.S.
L.S.
L.S.
0.125
0.75
0.50
7.15
0.91
3.90
151.50
141.60
135.25
1.00
1.00
1.00
18.94
106.20
67.62
7.15
0.91
3.90
417.19
4.17
421.36
63.20
484.56
96.91
96.90
Quantity
Rate
Amount
each
L.S
1.00
4.16
16.00
1.00
16.00
4.16
20.16
0.20
20.36
3.05
23.41
23.40
12.45.1
Code
7009
7010
7011
7012
7013
7014
1022
7015
7020
7016
7017
7018
7021
7019
9999
9999
0112
0114
0131
569
Quantity
Rate
Amount
sqm
metre
metre
metre
metre
each
10 Nos
each
100 Nos
kilogram
kilogram
roll
litre
each
108.86
238.14
41.14
90.72
10.80
189.00
216.00
72.00
1000.00
22.81
34.21
1.27
18.66
72.00
140.00
36.00
23.00
38.00
16.00
5.00
9.00
3.00
40.00
19.00
22.00
120.00
76.00
8.00
15240.40
8573.04
962.32
3447.36
172.80
945.00
194.40
216.00
400.00
433.39
752.62
152.40
1418.16
576.00
L.S.
L.S.
807.30
447.20
1.00
1.00
807.30
447.20
Day
Day
Day
31.104
31.104
10.368
141.60
135.25
141.60
4404.33
4206.82
1468.11
44817.65
448.18
45265.83
6789.87
52055.70
502.08
502.10
12.46
Code
Discription
7857
9999
12.47
12.47.1
Code
8668
9999
1022
1023
1207
1208
9999
9999
570
Quantity
Rate
Amount
each
L.S
1.00
4.16
70.00
1.00
70.00
4.16
74.16
0.74
74.90
11.24
86.14
86.15
Quantity
Rate
Amount
sqm
240.41
474.00
113953.39
L.S.
104.00
1.00
104.00
10 Nos
10 Nos
100 Nos
884.00
810.00
1694.00
9.00
58.00
20.00
795.60
4698.00
338.80
100 Nos
L.S.
L.S.
1694.00
26.91
53.82
18.00
1.00
1.00
304.92
26.91
53.82
Code
0130
0112
0114
12.47
12.47.2
Code
8667
9999
1022
1023
1207
1208
9999
9999
0130
0112
0114
Discription
Mistry
Carpenter 2nd class
Beldar
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 184.518 Sqm.
Cost of 1 Sqm.
Say
Discription
Details of cost for area of roof.
2x18.09x5.1 = 184.518 sqm.
Materials:
UV stabilised 2 mm thick plain FRP sheet
Carriage of sheet
G.I.Seam bolts and nuts 60cm
centre to centre zig-zag i.e. 30cm
centre to centre straight
Breadth is 5.1 metre
No. of bolts in one lap 5.1/0.3 =17 nos.
2x26(laps)xl7 nos. = 884 nos.
Bolts and nuts
G.I.,J or L hooks 8mm dia.
(No. of purlins to be used 5 on either
side)2x5x27
(No. of sheets)x23 nos. of bolts
in each sheet = 810 nos.
G.I., J or L hooks
Limpet washers (total of seam and J bolts)
884+810= 1694
Bitumen washers
Carriage of bolts and washers
Sundries
Labour:
Mistry
Carpenter 2nd class
Beldar
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 184.518 Sqm.
Cost of 1 Sqm.
Say
571
Unit
Quantity
Rate
Amount
Day
Day
Day
1.30
15.50
15.50
151.50
141.60
135.25
196.95
2194.80
2096.38
124763.57
1247.64
126011.21
18 901.68
144912.89
785.36
785.35
Quantity
Rate
Amount
sqm
L.S.
240.408
104.00
400.00
1.00
96163.20
104.00
10 Nos
884.00
9.00
795.60
10 Nos
100 Nos
810.00
1694.00
58.00
20.00
4698.00
338.80
100 Nos
L.S.
L.S.
1694.00
26.91
53.82
18.00
1.00
1.00
304.92
26.91
53.82
Day
Day
Day
1.30
15.50
15.50
151.50
141.60
135.25
196.95
2194.80
2096.38
106973.38
1069.73
108043.11
16 206.47
124249.58
673.37
673.35
12.48
Code
Discription
8670
2207
0123
0114
9999
12.49
Code
Discription
Details of cost for 3.60 metre
Materials
Manglore ridge tiles
20 mm thick
Carriage of tiles
Labour
Mason 1st class
Beldar
Sundries
Total
Add 1% for water charges
Total
Add 15% for contractors profit and overheads
Cost for 3.60 sqm
Cost for 1 sqm
Say
8669
2207
0123
0114
9999
12.50
572
Quantity
Rate
Amount
each
1000 Nos
160.00
160.00
9.50
85.13
1520.00
13.62
Day
Day
L.S
0.30
1.56
13.00
151.50
135.20
1.00
45.45
210.99
13.00
1803.06
18.03
1821.09
273.16
2094.25
209.43
209.40
Quantity
Rate
Amount
each
12.00
25.00
300.00
1000 Nos
12.00
85.13
1.02
Day
Day
L.S
0.01
0.15
2.60
151.50
135.25
1.00
1.52
20.29
2.60
325.43
3.25
328.68
49.30
377.98
104.99
105.00
Code
8671
9999
1023
1208
1209
9999
9999
0130
0112
0114
12.51
12.51.1
Code
8672
9999
9999
0130
0112
0114
Discription
Details of cost of 216.14 sqm.
Consider a shed of 20x10 metres.
(External dimensions of plinth).
Area of roof20.2xl0.70m = 216.14 sqm.
Materials:
Sheets used = 20
nos.xl0.70mxl.06m=226.84sqm
Add 3% wastage = 6.81
= 233.65sqm.
Precoated galvanised iron profile sheet 0.50
mm TCT
Carriage of sheets
G.I. J or L hooks with nuts and bolts 8 mm dia
Bitumen washers
Bitumen washers thick
Carriage of bolts and nuts, washers etc.
Sundries
Labour:
Mistry
Carpenter 2nd class
Beldar
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 216.14 sqm.
Cost of 1.00 sqm.
Say
Discription
Detail of lost for 20.20 metre
Material:One piece plain ridges
Consider a shed of 20x10m (external
dimensions at plinth).
Length of ridges 20.2 metre + 5% wastage =
23.11 metre.
Materials:
Precoated galvanised steel plain ridges.
Carriage (The ridge is to be fixed with the
same hooks as the Sheets)
Sundries
Labour:
Mistry
Carpenter 2nd class
Beldar
TOTAL
573
Unit
Quantity
Rate
Amount
sqm
233.65
325.00
75936.25
L.S.
10 Nos
100 Nos
100 Nos
L.S.
L.S.
104.00
476.00
476.00
476.00
806.00
39.52
1.00
58.00
18.00
27.00
1.00
1.00
104.00
2760.80
85.68
128.52
8.06
39.52
Day
Day
Day
2.34
9.34
9.34
151.50
141.60
135.25
354.51
1322.54
1263.23
82003.11
820.03
82823.14
12423.47
95246.61
440.67
440.65
Unit
Quantity
Rate
Amount
metre
L.S
23.11
13.52
330.00
1.00
7626.30
13.52
L.S
6.76
1.00
6.76
Day
Day
Day
0.14
0.55
1.64
151.50
141.60
135.25
21.21
77.88
221.81
7967.48
79.67
Code
Discription
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and
overheads
Cost of 20.20 metre
Cost of 1.00 metre
Say
12.51
12.51.2
Code
8673
9999
9999
0130
0112
0114
12.51
12.51.3
Code
8675
1023
1209
1208
9999
574
Unit
Quantity
Rate
Amount
8047.15
1207.07
9254.22
458.13
458.15
Quantity
Rate
Amount
metre
23.11
330.00
7626.30
L.S
3.25
1.00
13.52
L.S
3.25
1.00
3.25
Day
Day
Day
0.07
0.28
0.82
151.50
141.60
135.25
10.60
39.65
110.90
7793.95
77.94
7871.89
1180.78
9052.67
448.15
448.15
Unit
Quantity
Rate
Amount
metre
23.11
360.00
8319.60
10 Nos
100 Nos
100 Nos
L.S
40.00
40.00
40.00
9.88
58.00
7.00
18.00
1.00
232.00
10.80
7.20
9.88
Code
9999
0130
0112
0114
12.51
12.51.4
Code
8676
0222
1211
1208
9999
9999
0130
0112
0114
Discription
= 20.20 + 5% wastage = 23.11 metre.
G.I. J or L hooks with nuts and bolts 8 mm dia
G.I plain waher thick
Bitumen washers
Carriage of hooks, nuts, washers and curves
Sundries
Labour:
Mistry
Carpenter 2nd class
Beldar
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 20.20 metre
Cost of 1.00 metre
Say
575
Unit
Quantity
Rate
Amount
L.S
6.24
1.00
6.24
Day
Day
Day
0.10
1.30
1.00
151.50
141.60
135.25
15.15
42.48
135.25
8778.60
87.79
8866.39
1329.96
10 196.35
504.77
504.75
Unit
Quantity
Rate
Amount
metre
10 Nos
100 Nos
100 Nos
L.S
8.64
5.00
10.00
5.00
9.36
330.00
30.00
21.00
18.00
1.00
2851.20
15.00
2.10
0.90
9.36
L.S
6.76
1.00
6.76
Day
Day
Day
0.04
0.06
0.40
151.50
141.60
135.25
6.06
8.50
54.10
2953.98
29.54
2983.52
447.53
3431.05
416.90
416.90
12.51
12.51.5
Code
8677
1023
1209
1208
9999
9999
0130
0112
0114
12.51
12.51.6
Code
8674
9999
1008
1022
1024
1210
1208
9999
Discription
576
Quantity
Rate
Amount
metre
10 Nos
100 Nos
100 Nos
L.S
L.S
22.483
40.00
40.00
40.00
9.88
6.24
420.00
58.00
27.00
18.00
1.00
1.00
9442.86
232.00
10.80
7.20
9.88
6.24
Day
Day
Day
0.10
0.30
1.00
151.50
141.60
135.25
15.15
42.48
135.25
9901.86
99.02
10000.88
1500.13
11501.01
537.13
537.15
Unit
Quantity
Rate
Amount
metre
L.S
quintal
10 Nos
10.00
1.04
0.0749
20.00
360.00
1.00
2900.00
9.00
3600.00
1.04
217.21
18.00
each
30.00
7.00
210.00
100 Nos
100 Nos
L.S
70.00
40.00
2.73
20.00
18.00
1.00
14.00
7.20
2.73
Code
9999
0120
0114
9999
0130
0102
0112
0114
Discription
Sundries
Labour:
Blacksmith first class
Beldar
Sundries
Mistry
Blacksmith first class
Carpenter 2nd class
Beldar
TOTAL
Add 1% for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 10.00 metres
Cost of 1.00 metre
Say
12.52
Code
Discription
Details of cost for 100 sqm.
MaterialsGRID
Main T ceiling sections 24x38x0.3 mm (3.00
metre long)
Including Wastage @ 10%
Perimeter wall angle 21x21 x 0.30mm (3 metre
long)
Including Wastage @ 10%
Intermediate cross T-section 24x25x0.30mm
(1.2 mtrs long)
Including Wastage @ 10% on Grid for cut
outs
Intermediate cross T-section 24x25x0.30mm
(0.60 mtrs long)
8611
8612
8613
8614
577
Unit
Quantity
Rate
Amount
L.S.
2.73
1.00
5.33
Day
0.50
151.50
Day
L.S
Day
Day
Day
Day
0.50
12.61
0.28
0.84
0.62
1.68
135.25
1.00
151.50
151.50
141.60
135.25
75.75
67.62
12.61
42.42
127.26
87.79
227.22
4716.18
47.16
4763.34
714.50
5477.84
547.78
547.80
Quantity
Rate
Amount
each
29.50
162.00
4779.00
each
13.50
102.00
1377.00
each
147.00
62.00
9114.00
each
147.00
29.00
4263.00
Code
8615
8616
8617
8618
9999
9999
0111
0114
Discription
Including Wastage @ 10% on Grid for cut
outs
Intermediate cross T-section 24x25x0.30mm
(0.60 mtrs long)
Including Wastage @ 10%
Hanger rod 0.5 mm thick
Adjustment clip
Soffit cleat
Dash fastener 6 mm dia 50 mm long
Sundries i.e. scaffolding etc.
Carriage of materials etc.
LABOUR
Catpenter 1 st class
Beldar
TOTAL
Add 1 % for water charges
TOTAL
Add 15% for contractors profit and overheads
Cost of 100 sqm.
Cost of 1 sqm.
Say
578
Unit
Quantity
Rate
Amount
each
each
each
each
L.S.
L.S.
72.00
72.00
72.00
72.00
187.95
89.28
5.00
4.40
2.30
8.00
1.00
1.00
360.00
316.80
165.60
576.00
187.95
89.28
Day
Day
3.00
3.00
151.50
135.25
454.50
405.75
22 088.88
220.89
22 309.77
3 346.47
25 656.24
256.56
256.55
S.NO.
579
Reference No.
Contents in Brief
S.NO.
580
Reference No.
Contents in Brief
S.NO.
581
Reference No.
Contents in Brief
S.NO.
582
Reference No.
Contents in Brief