Beruflich Dokumente
Kultur Dokumente
TABLE OF CONTENTS
Exercise 4.1 Create a element icon............................................................................................................................................. 4.1-1
4.1.1 General Information................................................................................................................................................... 4.1-3
4.1.1.1 Objectives............................................................................................................................................................ 4.1-3
4.1.2 Exercise Steps ............................................................................................................................................................ 4.1-4
4.1.2.1 Create new graphic element for the agitator ...................................................................................................... 4.1-4
4.1.2.2 Insert graphic from ActiveX Symbol Library .................................................................................................... 4.1-4
4.1.2.3 Create expressions for changing the color ......................................................................................................... 4.1-5
4.1.2.4 Deploy and test the element................................................................................................................................ 4.1-5
4.1-1
4.1-2
4.1.1.1 Objectives
You will:
4.1-3
4.1-4
Open the Graphics Builder for the Display Element Icon 1 element and insert
the ActiveX Symbol Library.
Create a new SFStandard element from the library, open the Properties for the
element and select a graphic for a motor (displayed in the picture below).
In the Properties Window please set the FillColorMode to 1-Shaded and select
a color like displayed in the picture below.
Create a new SFStandard element from the library, open the Properties for the
element and select a graphic for a quirl (displayed in the picture below).
In the Properties Window please set the FillColorMode to 1-Shaded and select
a color like displayed in the picture below.
Move and resize the elements so that the shape is rather as displayed in the
picture below. Please resize the drawing area width as well and leave the
height as it is.
Open the Expression Builder for the motor element and select the property
FillColor from the tab card Alphabetic.
4.1-5
4.1-6