Beruflich Dokumente
Kultur Dokumente
Page 1 of 3
Scope
This procedure specifies minimum requirements for performing inspection to
assure the clients quality requirements pertaining to Fittings are met
Purpose
To ensure conformity of the product per the International standards and/or
additional Client specifications
Responsibility
The responsibility of execution of this procedure lies with the inspectors and the
inspection supervisor
Reference Documents
International Standards/ Specifications
ASME B16.9
Wrought steel butt welding fittings
ASME B16.25
Butt welding ends
ASME B16.28
Butt welding short radius elbow & returns
ASME B16.49
Factory-made Wrought Steel Butt welding Induction Bends
for Transportation and
Distribution Systems
ASME B31.3
Process Piping
ASME Sec. II, VIII, IX
Boiler and Pressure Vessel Code
AWS A5.XX
Specifications for Welding Filler Metal (Series of specifications)
MSS SP 55
Visual inspection
MSS SP 25
Marking inspection
MSS SP-75
Specification for High Test Wrought Butt welded fittings
ASTM
Applicable ASTM material and testing specifications
Saudi Aramco Requirements (If Applicable)
Saudi Aramco Material Systems Requirements:
02-SAMSS-005
02-SAMSS-006
IR 175 026400 Fittings for use in Hot Tap and/or Stopple operations
IR 175 026500 Alloy Steel (Including Stainless Steel) Fittings
IR 175 030100 Stockiest Supplied Inspectable Material
Procedure
6) Marking Inspection: Marking inspection shall be carried out as per the applicable
international standard and client specification (if any) and the purchase order
requirements.
As a general guideline following are to be checked during marking
inspection:
a. Fittings should be clearly marked with the following information;
b. Fittings marking for ASTM A234/A234M WPB shall be in accordance with ASME
B16.9, paragraph 4
c. Standards of materials (ASTM) and types or Grade.
Reference Documents:
FITTING INSPECTION CHECKLIST (yet to be developed)