Beruflich Dokumente
Kultur Dokumente
17MB21-00
09.09.2005
TABLE OF CONTENTS
1.
INTRODUCTION
1.1.
1.2.
1.3.
Purpose
Scope
General Features
3
3
3
2.
GENERAL DESCRIPTION
2.1. Introduction
2.2. System Building Blocks
2.2.1.
Analog Front End
2.2.2.
Back End
2.2.3.
General Block Diagram
2.2.4.
Side Board(s)
2.3. Power Management
3.
7
7
6
7
8
9
2
APPENDIX
13
18
18
18
20
22
23
23
244
24
25
26
27
28
28
29
29
29
29
29
29
309
29
30
30
Vestel Electronics
2006
( ! ) Important Note:
It is necessary to load LPT Driver, Visual I2C program and some .dll folders for
starting software update process. Please load that important folders.
If "=> Lpt Driver test OK! string is visible, There is no problem for parallel port.
But if Test with Error string is visible instead of OK, true .dll folders must be
loaded. (given by Vestel). If the problem already continues, please refer to the IT.
System Tools:
1) Visual I2C program
2) LPT Driver
3) .dll folders
HW Tools:
1) Software Update Card (17PRG24)
4) Scart Cable
Connections:
*** Please turn on the TV . After the TV image was visible, press menu and 1905
by using remote control. Please connect both of the scart connectors (TV scart1
connector and programming card connector) by using scart cable. Please connect
both of the parallel port connectors (computer parallel port connector and
programming card connector) by using parallel port cable. Then, please open the
Micronas VCTI49XYI programming software interface.
*** After this folder was opened, a window will appear as below. Please choose
window, find window options in turn in order. Please write bootloader in selected
window (or click the TVT button as below), searching will start automatically. At
the end of the searching process, please double click to bootloader.bat.
*** Please click over to the bootloader icon for prepearing to loading. TV will oto
stand-by mode if bootloder process was achived. And below window will appear
on the tv screen.
***If bootloader process was failed by using this button, another process is getting to
bootloader mode manually by using below window.
***After the reading process, bootloader version will come as 21 or 22 that depends
on bootloader version of IC.
***After that, please click to erase flash button that was determined by yellow color
as below.
***Set the options as to=0x7FFF and reclen=16. Please choose the path of binary file
by using NAME part.
*** As finally click to over of the Load Bin Flash icon .Loading will be started
automatically.
(!) IMPORTANT NOTE (1): If there is a problem as fast loading. Please follow the
steps;
*** Please open the File Preferences LPT Preferences. Below window will appear.
(!) IMPORTANT NOTE (2): If there is a problem during bootloader process or there is
a message as No Acknowledge From The Slave, Please apply the following steps;
-Please turn off the TV.
-Please open the bootloader file.
-Please press bootloader icon and turn on the TV at the same time. You have to do
these process at same time.
*** Please click the Device icon for settings. Set as below.
*** For reading process, please click the button that was marked with yellow.
*** After resding process, E2PROM content will appear on the screen.
*** For writing process, choose file, open and folder that will be loaded. , please click
the button that was marked with yellow.
AUTOCALIBRATION PROCEDURE
PC calibration pattern.
Exit
AutoColour
AdcGain
R
99
AdcOffset
R
133
Color
Gain
R
140
Offset
R
118
Con Max
Bri Mid
Color
Sharp
99
B 99
G 129
Temp
B 145
Cool
140
B 140
120
145
115
32
9
B 127
09.09.2005
1. Introduction
1.1.
Purpose
The purpose of this document is to define the DHDS and the operation of 17MB21, 15XGA with
LVDS input, 19 SXGA with double LVDS input. It is aimed to provide information to engineering
staff to understand the operation and specs of the TV.
The other related technical documents are as follows:
1
2
3
5
6
7
Title:
17MB21 Schematics
IR Receiver and Led Display Board Schematics
Keypad Board Schematics
VCTI49xy Datasheet ( Video-Controller-Text-IF-Audio IC)
TSU33AWL for 15XGA TSU36AWL for SXGA Datasheet ( Controller
with Analog Interface and Multi-Purpose Output Transmitter)
Other ICs Datasheets (Please check the table in Appendix 3.2 for the
complete component list.).
Table : Related documents.
1.2.
Scope
1.3.
General Features
The document covers detailed descriptions of 17MB21 chassis system building blocks.
General product specifications and overview of the system will be introduced in this part. The
system is a low end; 15 and 19 TFT LCD TV solution basically for EU market with VCTI49XYI and
TSU33AWL or TSU36AWL Video Image Processor chip-set on single-layer PCB. As the first target
market is EU, the first release of the TV will support PAL/SECAM B/G/D/K/I/L/L.
The other general default features of the TV are as listed below:
IR Control (RC5 and other customer specific protocols)
OSD
100 Program Storage Locations
Teletext
No Ident Timer
Screen Size (15, 19)
Child Lock
Sleep Timer
170/270V AC Plug
ST-BY Power Consumption <1W
1 Scart input (1st Full)
S-VHS Input , BAV input
75 ohms antenna input
PC Input (VGA)
2H/4H Comb Filter
17MB21
11.05.2006
Sound Features
Equalizer
FM Radio
Linear Stereo
German-NICAM Stereo
5-Band Equalizer Control
SRS TRU Surround (OPT)
SRS TRU Bass (OPT)
BBE, WOW (OPT)
Stereo Audio Output Power (2x2W )
16R speaker
Volume Controlled HP Output, Stereo Audio line out, Stereo Audio line in
Coaxial Audio Output ( with IDTV or DVD Option)
Detachable Headphone Output(OPT)
Picture
4:3 PANEL --- 4:3, 16:9, Auto
Picture Modes ( Bright, Standard, Soft)
Media Window Enhancement (MWE)
White balance settings (warm/normal/cool) for TV&PC
Auto Shut down
Multi System Reception : PAL-SECAM BG-DK-I/I-L/L
NTSC Video Playback
WSS (16:9 / 4:3 Aspect Ratio Auto Switch)
Channel Type Sorting (Favorite/Sport/Music/News/Movie)
Tuning
FST
Frequency Search (OPT)
APS (Auto Search / Name / Sort)
Auto Search
CATV / HYPERBAND
Keyboard
Volume -/ +Button
Program -/+ Button
Menu Button
TV / AV Button
Teletext/OSD
Simple Text 10 Pages
Fastext & Top Text (OPT)
Teletext Languages (ALL)
Character Based OSD
OSD Color & Transparency Selection
The general optional features of the system are as listed below:
17MB21
11.05.2006
AV Input
Y/Pb/Pr support via VGA connector
Full Green Mode DPMS Support
Plug & Play (DDC2Bi) For Windows 9X, ME, 2000, XP (OPT)
Headphone {side || on board} (When the headphone is used, TV volume cut off otomatically)
IDTV With Single CI Connector (OPT)
DVD (OPT)
Comb Filter (OPT)
LTI, CTI (OPT)
IDTV
OSD; 22 Menu Languages ENG, FRA, GER, ITA, SPA, POR, TUR, SWE, DEN, FIN, NOR, POL,
HUN, CZE, BUL, ROM, RUS, DUTCH, CRO, SLOVAK, SLOVENIAN and GRE.
2x2W Speaker Output Power.
09.09.2005
2. General Description
2.1.
Introduction
2.2.
Analog Front End : VCTI (Microcontroller + Video Proccessor + Sound Proccessor + IF+
Keyboard/IR Interface+OSD), Audio Amp.
Back End
transmitter)
Side Board(s)
2.2.1.
17MB21 Main Board consists of two major blocks. The first block is analog front-end and this block is
handled by VCTI chip that is highly multifunctional. This IC does demodulation of Video & Audio
from Tuner IF, CVBS, Audio, RGB, SVHS input selection and processing. It has an audio processor
that supports equalizer or tone control, volume control, AVL, surround effect etc and supplies
amplifier, headphone and CVBS & audio line outputs. It handles video processing such as colour
standard detection and demodulation, picture alignment (brightness, contrast, colour etc.). The IC
also does teletext decoding with fastext memory. After video processing, the processed video is
applied to TSU3XAWL chip in RGB format.
The TV Tuner is an asymmetrical or a symmetrical IF output type and is PLL controlled. The IF
signal is applied single saw filter. After the SAW filter block, IF signal is applied to VCTI IF inputs
(Pin 16 and 17).
As VCTI can handle all the audio processing, there is no need for additional audio processor solution
on the board. VCTI supports three Audio outputs. These outputs are assigned to Line-out,Speaker
and SC1 audio out. The board employs TDA2822M to drive speakers and headphone.
2.2.2.
Back End
The Back End section is handled by TSU chip. The RGB input can handle standard interlaced RGB
output from VCTI, PC VGA RGB input and YPbPr. There are two set of ADC is present in TSU which
are assigned to YPbPr/VGA and VCTI RGB output sources.
TSU33AL chip have an integrated 6/8-bit LVDS transmitter.
Backlight dimming and Panel power supply On/Off control is achieved via TSU chip. There are two
pins to control inverter one of them is used for adjusting backlight the other one is used for
backlight on/off control. Backlight on/off control is performed by VCTI.
2.2.3.
11.05.2006
Figure 1
11.05.2006
2.2.4.
Side Board(s)
2.2.4.1.
Front Audio Video board (17FAV20) for 17MB21 main board is detailed in the Table below.
Connector
Name
Type
Function
JK100
JK101
JK102
JK103
JK104
Headphone Jack
Side Headphone
PL100
Connector Header 8P
PL103
Connector Male 5P
Connector 5P for HP
PL101
Connector Male 5P
Connector 5P for
CVBS, Audio R and L
2.2.4.2.
11.05.2006
Keypads
The keypads button descriptions for 17MB21 main board are listed in the Table below.
Key Name
Power*
Stand-by*
Type
Soft sw.
Tact sw.
TV/AV
Menu
Tact sw.
Tact sw.
Program-
Tact sw.
Program+
Tact sw.
Volume-
Tact sw.
Volume+
Tact sw.
Function
Power shut-down and turn on
Switch between stand-by and turn on
modes.
Input source select button.
Display main menu on the screen. If any
menu is active, display the upper menu. If
main menu is active, turn menu off.
Go to the lower program at any time in TV
mode. (Scroll key function in menu mode)
Go to the upper program at any time in TV
mode. (Scroll key function in menu mode)
Decrease the volume level in the volume.
(Scroll key function in menu mode)
Increase the volume level in the volume.
(Scroll key function in menu mode)
11.05.2006
Connector PL1 on keypads (connected to the connector PL303 on the main board):
Pin No:
1
2
3
4
2.2.4.3.
Name
Gnd
AV Tact SW
Soft SW/Tact SW
Program and
Volume SW
IR&Led Board
IR&LED board contains LED indicator(s) to show TVs status (For 1510/11 cabinet led colors are:
Red for stand-by, green for normal operation) and one IR receiver to get remote control
instructions. All the IR&LED boards have the same circuit and connector pinning but the different
mechanical structure to fit different cabinets For 1510/11 cabinet 17LD12-3 boards are used.
17LD12-3 Schematics
10
2.3.
11.05.2006
Power Management
All power requirements supplied from LIPS (Light Integrated Power Supply) Boards.
IPS01 Lips Board used for 15 products and IPS02 for 19 products.
(Please check the and Table for power management details.)
11
11.05.2006
12
11.05.2006
3.
APPENDIX
3.1.
2CS
ACI
ACL
ADC
AF
AFC
AGC
AKB
API
ASD
ASP
ATS
AV
AVC
AVL
BBE
BE
BKS
BTSC
CC
CCC
CE
CLUT
COR
CVBS
DAC
DBE
DDEP
DEMDEC
DPL
DPTR
DRCS
DSP
DUB
EPG
FA
FASTEXT
FB
FE
FLOF
FST
GTV
HP
HSH
IF
IIC
IIS
LibCoMa
LS
MIPS
MPX
MS
NICAM
NTSC
NVM
OSD
OSRP
OTP
PAL
PAT
PB
PIP
PLL
PMT
PP
PS-MTS
PSW
PWM
RC-5
RCP
RF
RGB
Round-robin
RPMS
RTC
SAP
SAW
SCART
SCI
SCL
SDA
SDE
SECAM
Set-maker
SFR
SHLD
SIF
SRT
SS
SSS
11.05.2006
Global TeleVision.
Headphone
Horizontal Shift
Intermediate Frequency. Normally the output of the tuner.
Inter Integrated Circuit
Inter Integrated Sound
Library Configuration Manager.
Loudspeaker
Million Instructions Per Second
Japanese multiplexed sound standard
Multi Standard
Near Instantaneously Compacted Audio Multiplex
National Television System Committee. Colour encoding system.
Non-Volatile Memory
On Screen Display
Overall System Realization Process
One Time Programmable
Phase Alternating LineColour encoding system.
Painter Authoring Tool.
Development support tool to define Painter
character sets (and UIMS data structures).
Picture Booster
Picture In Picture
Phase Locked Loop
Power ManagemenT
Personal Preferences
Mainstream Television Solutions
Program Status Word
Pulse Width Modulation
Remote Control system
Remote Control Preprocessor
Radio Frequency TV signal broadcast.
Red, Green Blue. The colour signals.
A style of scheduling where each task is executed in turn, provided it is ready
to run.
Resource Persistent Memory Store
Real Time Clock
Second Audio Program; part of BTSC sound system.
Surface Acoustic Wave
External CVBS, S-VHS and Sound input/output, RGB and switching input.
Software Configuration Item
Serial Clock
Serial Data
Software Development Environment
Sequentiel a Memoire Colour encoding system.
The manufacturer/developer of the end product.
Special Function Register.
Software High Level Design
Sound Intermediate Frequency
Signal RouTing
Source Switching
Static Standard Selection
14
State
Status Handler
STB
TOP(TEXT)
TXT
UHF
UI
UIMS
UOC
User
VDS
VG2
VHF
VIF
VOD
VPS
VS
VSH
VSP
VST
Y/C
YprPb
YUV
11.05.2006
Audio Preset:
15
11.05.2006
Program number: A program number identifies a location in NVM. At this location all program
information, like frequency, lock, AFC, etc., can be found. Selecting a program
invokes activating the program information.
Last status:
A variable can be classified as last status' setting. Settings that are classified
as last status are stored in NVM. The following settings are part of the last
status:
Program number
Volume
Audio Preset
Video Preset
Aspect ratio
WSS:
Wide Screen Signalling
Letterbox:
When a 14:9 or 16:9 format movie or picture on 4:3 transmission displayed
on 4:3 set, black bars on top and the bottom of the screen are displayed. This
is called letterbox or 4:3 letterbox.
16
3.2.
No
3.2.1.
09.09.2005
Basic Components
Title
VCTI
Description
Video-Controller-Text-IFAudio IC Family
Supplier
Micronas
TSU33AWL
or
TSU36AWL
74HC4052
74HC4053
TDA2822M
LM1117
KA78L08
IRF7314
NTGS3446
Philips
ST
National
Semiconductor
Fairchild
IR
On-Semi
FDC642P
Fairchild
Mstar
Philips
VCTI
Fig
VCTI49xyl family has two package types; PSSDIP88 and PMQFP144. PSSDIP88 package is
chosen because of its compatibility for soldering in production. PSSDIP88 package has two
17
11.05.2006
versions; 1 and 2. PSSDIP88-2 package is the pinning mirrorred version of PSSDIP88-1 and is
preferred to be used for layout compatibility.
18
11.05.2006
3.2.1.1.
3.2.1.2.
Pinout
11.05.2006
3.2.1.3.
PIN
NO
47
48
PORT
NAME
P10
P11
FUNCTION
HW RESET
Rx/LED*
O
I/O
49
P12
Tx/Led*
50
51
52
53
54
55
56
P13
P14
P15
P16
P17
P20
P21
VCTI_VS
Key
AV1_Status
Program status
ON/OFF
BKL_ON/OFF
CS
O
I
I
O
O
O
O
62
85
27
28
Safety
Vert+
P22
P23
VCTI_HS
IRQ
WP
IR
O
O
O
I
Mstar reset
for IDTV communication/WOIDTV
for IDTV communication/WOIDTV
Vertical sync. output from vcti
Keyboard function select
Scart1 function select.
For 4052 Switch control
Power switching signal
Backlight on/off
Communication between VCTI
and Mstar
Horizantal sync. output from vcti
for IDTV communication
Write protect for vcti
Infrared Receiver
NOTE
* Ths ports are used for different functionality according to IDTV support. In IDTV case Mute and
Led functions are controlled by Digital Board.
3.2.2.
TSU3XAWL
The TSU33AL is total solution graphics processing IC for LCD displays with panel resolutions up to
XGA. It is configured with a high-speed integrated triple-ADC/PLL, a high quality display
processing engine, and an integrated multi-purpose output display interface that can support LVDS
panel interface formats. To further reduce system costs, the TSU33AL also integrates intelligent
power management control capability for green-mode requirements and spread-spectrum support
for EMI management.
3.2.2.1.
Block Diagram
20
3.2.2.2.
11.05.2006
Pinout
21
3.2.2.3.
11.05.2006
3.2.3.
FUNCTION
Backlight Brightness adjustment
Panel Supply Voltage On/Off
NOTE
74HC4052
Pin Configuration
22
3.2.4.
11.05.2006
74HC4053
74HC4053 are triple 2-channel analog multiplexers/demultiplexers with a common enable input ().
Each multiplexer /demultiplexer has two independent inputs/outputs (nYo and nY1), a common
input/output (nZ) and three digital select inputs (S1 to S3). With LOW, one of the two switches is
selected (low impedance ON-state) by S1 to S3. With HIGH, all switches are in the high
impedance OFF-state, independent of S1 to S3.
Pin Configuration
3.2.5.
Logic Symbols
TDA2822M
11.05.2006
3.2.6.
LM1117
3.2.7.
KA78L08
The LM1117 is a series of low dropout voltage regulators with a dropout of 1.2V at 800mA of load
current.
The LM1117 is available in an adjustable version, which can set the output voltage from 1.25V to
13.8V with only two external resistors. In addition, it is also available in five fixed voltages, 1.8V,
2.5V, 2.85V, 3.3V, and 5V. The output voltage is adjusted according to the formula shown in Figure
KA78LXXA series of fixed voltage monolithic integrated circuit voltage regulators are suitable for
application that required supply current up to 100mA.
24
11.05.2006
3.2.8.
IRF7314
3.2.9
NTGS 3446
N-Channel Mosfet
*Ultra Low RDS(ON)
*Fast Switching Speed
25
11.05.2006
3.2 10
FDC642P
P-Channel Mosfet
*Ultra Low RDS(ON)
* Fast Switching Speed
* Low Gate Charge
3.3.
3.3.1.
Signal level
0.5V rms
26
Impedance
<1kohm
11.05.2006
Pin Signal
2
SC1_R_IN
3 SC1_L_OUT
4
5
6
SC1_L_IN
7
SC1_B
8 AV1_STATUS
9
10
11
12
13
14
SDA
SC1_G
SCL
15
16
SC1_R
Description
Audio input (right)
Audio output (left)
Ground (audio)
Ground
Audio input (left)
Blue input
Function select (AV
control)
Ground
For flash update
Green input
For flash update
Ground (red)
Ground (blanking)
Red input or
Chrominance input
3.3.2.
Signal level
0.5V rms
0.5V rms
0.5V rms
0.7V
High (9.5-12V) - AV
mode
Mid (5-8V) - Widescreen
Low (0-2V) - TV mode
Digital
0.7V
Digital
-
Impedance
>10kohm
<1kohm
>10kohm
75ohms
75ohms
-
0.7V / 0.3V
75ohms
75ohms
1V including sync
75ohms
1V including sync
75ohms
>10kohm
PC Connector-(1x15 PL303)
Pin #
Logic
I/O
1
2
3
13
14
12
15
9
Analog
Analog
Analog
TTL
TTL
TTL
TTL
Power
I
I
I
I
I
I/O
I
I
Signal
Description
Red Component
Green Comp.
Blue Comp.
Horizontal Sync
Vertical Sync
I2C Data
I2C Clock
+5V
27
Signal
Level
Impedance
75
75
75
3.3.3.
11.05.2006
Pin #
Logic
4,5,6,7,8,10
11
Ground
No
Connect
Signal
Description
Signal
Level
Impedance
3.3.4.
I/O
Symbol
DVB_IN_R
GND
DVB_IN_G
GND
DVB_IN_B
GND
DVB_IN_CVBS
GND
DVBL
DVBR
GND
GND
AGC_DVB
LEDCON
DVB_SW
Muteport
N.C.
RXD
TXD
IRQ
GND
GND
SDA_DVB
SCL_DVB
Description
DVB Red Signal
Ground
DVB Green Signal
Ground
DVB Blue Signal
Ground
DVB Video Signal
Ground
Digital Sound Left
Digital Sound Right
Ground
Ground
DVB AGC Signal
Led Control Port
DVB Sound Switch port
Mute Control Port
N.C.
Receive
Transmit
Interrupt Request
Ground
Ground
DVB Data Signal
DVB Clock Signal
FAVINL
Gnd
FAVINR
Gnd
CVBS_IN
6
7
Gnd
SVHS_C
Description
Signal level
Audio in (left)
Ground (audio)
Audio in (right)
Ground (audio)
Function select (AV
control)
Ground (audio)
Chroma input
0.5V rms
0.5V rms
-
Impedanc
e
>10kohm
>10kohm
-
1V including sync
75ohms
0.7V
75ohms
28
11.05.2006
Pin Signal
8
3.3.5.
SVHS_Y
Description
Signal level
Luma input
0.7V
3.3.6.
Signal
GND
3v3_STB
5V
IR
VIN
Signal
GND
KEY
Soft SW
KEY
Description
Mechanic Switch
Ground
3.3 V Standby
ON/OFF
Infrared
Supply
Description
Ground
AV Tact SW
Soft SW
Program and Volume SW
3.3.10.
Signal
MECH_SW
GND
3v3_STB
5V
IR
VIN
3.3.9.
Description
Ground
3.3 V Standby
ON/OFF
Infrared
Supply
3.3.8.
Signal
IF2
IF1
Gnd
3.3.7.
Impedanc
e
75ohms
Signal
RXD
TXD
GND
5V
Description
Receive
Transmit
Ground
5 Volt
3.3.11.
11.05.2006
Signal
5V
KEY
GND
HWSDA
Description
ON/OFF
Key signal
Ground
Data signal (VCTI side)
HWSCL
3.3.12.
Pin
1
2
3
4
Symbol
PVCC
TXOUT3+
PVCC
TXOUT3V3_3D or LVDS_GND
TXCLKOUT+
LVDS_GND
TXCLKOUTLVDS_GND
TXOUT2+
LVDS_GND
TXOUT2LVDS_GND
TXOUT1+
LVDS_GND
TXOUT1LVDS_GND
TXOUT0+
LVDS_GND
TXOUT0-
3.3.13.
Description
Panel Voltage
LVDS Signal(+)
Panel Voltage
LVDS Signal(-)
+3.3V or Ground
LVDS Signal(+)
Ground
LVDS Signal(-)
Ground
LVDS Signal(+)
Ground
LVDS Signal(-)
Ground
LVDS Signal(+)
Ground
LVDS Signal(-)
Ground
LVDS Signal(+)
Ground
LVDS Signal(-)
Signal
Right+
Right -
Pin
1
2
Signal
Left+
Left 30
11.05.2006
3.3.14.
Signal
Right+
Right+
GND
Right+
Right+
Description
Right sound
Right sound
Ground
Right sound
Right sound
IN
Out
Out
IN
Signal
DVD_L
GND
DVD_R
GND
DVD_SENSE
DVD_IR
Description
DVD Audio Left
Ground
DVD Audio Right
Ground
DVD On Sense
DVD IR Signal
Signal
DVD_Y
DVD_C
Gnd
Description
DVD Luma Signal
DVD Croma Signal
Ground
31
input for HP
output for HP
output for HP
input for HP
+ 3B/ 5B2 87
SCART
$ 9B67$78 6
5* % )%
6&B/ 5 B2 8 7
6&B9B2 8 7
6&B9B,1
6&B/ 5 B,1
/ ,1 ( B/ 5 B2 8 7
0 $ ,1 < &
%$ 9B&9%6
%$ 9B/ 5 B,1
3&B/ 5 B,1
6 $9B&9%6
6$ 9B/ 5 B,1
3&B/ 5 B,1
+ 3B/ 5 B2 8 7
63 . B/ 5
5 * % + 6 96
<3 E3U 62 <
3& ) $ 9B6:
' 9% 6:
63. B/ 5
%&
<*
&9%6
8 $ 57
,54
' 9%B6:
3& ) $ 9B6:
&2 1 75 2 / 32 5 7
TUNER