Boac, Marinduque R.C Tagala Construciton Carlo Romano Materials Engineer R.C Tagala Const 4-14-11
Priliminary Data
Fine Aggregate, Lab. no. 4-02-04
Coarse Aggregate, Lab. no. 4-03-04 Manufactured ( ) Natural (x) Rounded ( ) Angular (x ) Finess modulus -----------------3.17 Maximum size, mm ------------- 75 Specific Gravity ---------------2.56 Abrasion Loss, % ------------- 24 Moisture content % ------------2.63 Specific Gravity, SSD ---------- 2.76 Absorption % ------------------0.48 Moisture Content, % ------------ 0.90 Unit weight, kg/cu.m (loose) ---1575 Absorption, % ------------ 0.33 Brand of cement ---------------Fortune Unit Weight, kg/cu.m (loose) -- 1540 Admixture ------------------------ none Water Source ------------------- DEEPWELL ===================================================================================== Design specifications requirements: Class of Concrete --------------- A Cement Factor, bags/cu.m -------------10.0 Compressive Strength ---------------- 3000 Psi (20.70 Mpa) Slump, mm -------------------100.00 Proportion of cement to total aggregates by weight: Cement 1 bag Total aggregates Design mix per bag of cement Absolute Volume of concrete , cu.m = Absolute Volume of cement, cu.m = Absolute volume of water, cu.m =
= Weight of cement = Sp.gr.cement (unit wt. Water) =
40 3.15 (1000)
= =
Absolute volume of water & cement, cu.m =
Absolute volume of F.A & C.A, cu.m =
Correction on F.A : % Total Aggregates by absolute volume FA, %, from Table V = Total Aggregate = Corrected F.A, % = Absolute volume of FA, cu.m = (abs. vol. of FA & CA) 100 Absolute volume of CA, cu.m = abs. vol. of FA & CA - abs. vol. of FA Materials Abs. volume Sp.gr. Unit Uncorr. cu.m Weight Weight kg/cu.m kg. Cement F.A C.A Water