EXHAUST AND
FRESH AIR LOUVERSCHAPTER-7
o1 Introduction, Features & Characteristics.
02 Models, Exhaust Air Louvers.
03 Models, Fresh Air Louvers.
04 Profiles used in Exhaust & Fresh Air Louvers, Available Fixing Mounting.
05 Effective Area Values for Exhaust and Fresh Air Louvers.
06 Tabular Selection for Exhaust and Fresh Air Louvers.
07 Air Flow Resistance Diagram, Selection Procedure.
08 Ordering Data.EXHAUST AND FRESH AIR LOUVER:
The Aluminium Exhaust and Fresh Air Louvers of
BCI are used both internally and externally in LT ee 1
buildings for the extraction of re — cycled air, —
intake of extemal fresh air of the expulsion of
contaminated air, The quality of the material
used and the particular inclination of the blades cpeneeneeemnmnneeemetel
at 60° angle downward offer a weather resistant an
Louvers which gives good protection against the ——
direct ingress of rain water, leaves and birds.
Can also be used directly installed on walls for the
ventilation of industrial areas. Also suitable for the
use with an adjustable or overpressure damper
for air flow and pressure control.
Features & Characteristics :
+ Construction : Frame & blades are made of
high quality Extruded Aluminium Profiles of 6063
Alloy.
+ Frame Flange width : 30 mm.
* Blades : Fixed Louverd type arranged horizontally
and inclined downward to 60 ° angle in order
to:
- prevent the ingress of rain water.
- Prevent the ingress of light.
- Block vision while straight viewing.
- Be suitable for external walls and
screening applications.
+ The blades are positioned on 25 mm minimum
centers up to 35 mm maximum centers
resulting in a high free area to provide
minimum resistance to air flow.
+ Available in wide variety of neck sizes with
100 x 100 mm minimum single section size and
2 mir maximum single section height. Louvers
height exceeding 2 mir to be fabricated and
supplied in multiple sections depending on
length and height dimensions as well as site
conditions.
+ The assembly of multiple sections is unlimited,
where each section operates independently.
+ Multiple sections : Supplied as separate sections and assembly by others on site,
+ The Fresh Air Louvers suitable for the use in air inlet of fresh air ducts and air handling units.
It’s also suitable for the use at dirty air exhaust discharge.
* Wire Mesh screen of galvanized steel is attached to the interior face of the louver as an
option, mesh size 3x3 mm.
+ Exhaust Air Louvers are available with different type of attachments such as :
- Opposed Blade Damper (Model EAL + 0).
- Aluminium Filter (Model FAL c/w Filter).
~ Both the Damper and Filter (Model FAL + D c/w Filter).
+ Available with Foam type Rubber Gasket for air sealing (provided as an option)
* Mounting instructions : see page No. EL-04
* Surface Finishes : see page No. EL-08.
cireseres the right to moke changes witout Hor notice, fL-o1BONNE nue BCcr
Exhaust Air Louvers
Construction and Dimensional Details
NT n Ve Model EAL + D (Double Frame)
4
_
ul 1
+ Wire Mesh optional, ‘+ Wre Mesh foptinal)
‘+ For Opposed Blade Damper details and construction
reler to chapter {1} 0° (2),
+ Double Frame Louvers are provided with door hinge
from one side and screw from other side allowing the
second frame [inner one] toact as an access door to
the Opposed Blade Damper.
N: Nominal/isted Size
A: Actual S20 10} x (H-10}
F 2 Face Size +50) x (H#50)
+ Exhaust Air Louvers furnished approximately 10 mm less than the Nominalisted Size.
‘+ AllDimensions are in mm and subject to #1 mm tolerance,
fength (x Height [H)
Aciceserves the right 1o moke changes without prior notice eL-02Bunun eT ns BCT
Fresh Air Louvers
Construction and Dimensional Details
ON aos IC a Ag tC)
[
el
\IX\TNTNT
2,
+ Wire Mesh (optional + Wie Mesh (optinal,
+ Fier: Aluminium Washable Filer Media of 1/2" standard _« For Opposes Blade Damper details ond constuction reter
thickness (1" & 2" thicknesses aso avaiable on requestas "fo chapter {!) or 2),
an option) + Fiter: Aluminium Washable Filer Medi of 1/2" standara
thickness (18. 2* thicknesses ao avaliable onreques os
an option]
+ Double Frome Louvers are provided with door hinge trom
fone side ond screw fom other side alawing the second
frame (inner one} 1o del os an access door tothe Filer
‘and / o” Opposed Blade Damper
N: Nominoliisted Size
A: Actual Size
F :Face Size
‘+ ®xhous! Air Louvers furnished approximately 10 mm less than the NominaiListed Size.
+ All Dimensions ore in mm and subject fo #1 mm tolerance,
‘ength () x Height [H)
Ci eseres the right to make changes without prior notice, eL-03BONO LU Ons BCcY
le el IE ao RN Sar Re Roe meld
Exhaust and Frosh AlrLouvers xnaust and Fresh Air Louvers
+= AllDimensions are in mm and subject to + 0.2 mm tolerance.
Ne sa aT
‘A. Concealed Fixing (Spring Clip Mounting) B. Face Screw Fixing
The Louver i fixed by means of spring clips fo the The Louver i xed fo the wooden
‘wal or parition where no serews are Vibe frome by means of vibe screws
‘Note : For details of multiple sections consult BCL
eL-04
wet ne ight fo make charges without exoGUS Pi
aa wae tC Ce OPS Lake)
Engineering and Performance Data
(m*)
get
sese8
150
g
550
338
L
650
700
750
‘800
850
700
950
1000
1050
1100
1150
1200
H> 100
0.004
0.006
0.008
010
0012
0016
ois
0.020
0.025
0.028
0.033
0.036
0.041
oss
0.048
0.051
0.087
0.060
0.065
0.088
0.088
0.075
078
Hp 650
0.232
0.264
0.283
osi2
0.332
0.369
0389
0.423
oss
0.465:
0.486
0507
0.009
012
ois
coi
024
027
0.030
0.038
0.041
0.050
0.054
0.061
0.065
0.072
0.077
0.085
0.090
0.098
0.102
0.107
ona
on7
700
0.284
0305
036
03s?
0397
0-19
0455
0478
0.501
0.528
0546
+ L&H Dimensions ere in mm.
+ Damper at ful open position (it any}.
0016
0.021
0.025
0.032
0.036
0.041
0.050
0.055
0.086
0072
0.081
0.087
0.096
0.102
oi
0.120
0.130
0.137
04s,
0.150
0.156
750
0.326
0.360
0.383
0.425
04s
0.488
osi2
0536
0561
0.585
0026
0031
0.039
0.045
0.051
0.063
0.089
0.083
0.089
o.102
0.109
01120
0128
1142
0150
Ore
o.71
079
087
0195
o.aa4
0.408
0.454
0479
0.520
0546
os72
0.435
0.624
037
047
0.054
0.061
0.075
0.083,
0.099
0.107
ona
0.131
ae
0.153
170
0.180
0.195
0205
0215
0.226
0.234
850
0.434
0.482
0.509
0.553
0.580
0.608
0.435
0.663
0.055
0.083
0.071
0.088
0.036
one
0.125
oa
o.1s2
0.168
Or
0.198
0209
0.2289
0239
0.250
0.262
0273
0.510
0.539
0.585
0614
0.644
04673
0702
950
0569
oie.
064s
0479
o7i0
741
0.072
0.081
0.100
0.110
0.132
0.143
0.162
0.74
0192
0.204
027
0.239
0.260
0273
0.286
0.299
0312
1000
0.650
0683
ois
0748
0780
0.091
ong)
0.124
0149)
0.161
0.183)
0.196
0216
0.230
0.255
0.269
0293
0307
0.322
0.336
0.35
1050
o77
0751
078s
089
0.125
0.138
0.165
0.179
0.203
0218
0.240
0.255
0.284
0.299
0.325
0341
0.358
0374
0.390
1100
0787
0822
0.858
0.151
0182
0.197
0.223
0.239
0.264
0281
o3i2
0329
0.388
0375
0.393
oi!
0.429
1150
01860
0.897
200 250 300 350 400 450 500 550 600
0.198
0215
0244
0.261
0.288
0.306
0.340
0389
0.390
oai0
0.029
0.44
0.468
ase eLoz
1200
0.936PENSE Pass BCT
Engineering and Performance Data
Tabular Selection for Exhaust and Fresh Air Louvers
FER EE ET)
FR NCS ENC VELCRO ICES]
CCAGH)
(2) 25 0020008 000600050002
(24) 50 0.023 0.015 0012 0.009 0.008 0.007 0.006
(47) 100 0.046 0.031 0.023 0.019 0.015 0013 0012
(7) 150, 0.070 0.046 0.035 0.028 0.023 0.020 0017
(94) 200 007 0062s ons | os) | zr | 0.8
(118) 250 Oe 0.077, 0.058 0.046 0.039 0.033 0.029
(142) 300 0139 0073 ao ans | oom | 0.085
(165) 380 016 0.108 00) 00K =O
(189) 400 0.186 0124 0.093 0.074 0.062 0.053 0.046
(212) 450 0.209 0.139 0.105 0.084 0.070 0.060 0.052
(236) $00 0220155 ate 0m | 077 | 0068 | 0.058
(260) 350 0255 0.170 0128002085 0730.64
(283) 600 0.279 0.186 0.139 On 0.093, 0.080 0.070
{307} 650 0.302 0.201 O.1ST 0121 6.101 0.086 0.075
(330) 700 0.325 0.217 0.163 0.130 0.108 0.093 0.081
(354) 750 0.348 0.232 17s 0.139 Ons 0.100 0.087
(373) 800 032028 a8 | ize t08 | 0.08
(uo) 850 039 020 aly ots8 tse O9
(425) 900 0.418 0.279 0.209 0.167 0.139 Ong 0.105
(448) 950 0.441 0.294 0.221 0177 0147 0.126 oo
(472) 1000 046s 03100732 ates | ones | oss | 08
(496) 1050 0.488 0.325, 0.248 0.195 0.163 0.139 0.122
(519) 1100 osii 034102850204 | ao | ods | 0.128
(543) 1150 oss 0356 0267 OA 7B 53.184
(566) 1200 0.557 (0.372 0.279 0.223 0.186 0.159 0.139
{590} 1250 0.581 0.387, 0.290 0.232 0.194 0.166 0.145,
(613) 1300 soe 04080020242 | ozo | ors | 0st
(637) 1350 0.627 0418 0314 0.251 0.209 0179 0.157
(661) 1400 0650 04s 025 azo) oz tes | 0188
(684) 1450 0.674 0.449 0.337 0.269 0.225 0.192 0.168
(708) 1500 0670465 asa oz | oz se | 0.174
(731) 1550 0.720 0.480 0.360 0.288 0.240 0.206 0.180
(755) 1600 ons 0495072 omer | ozs |i | 0.186
(779) 1650 0766 0Si1 03830307055 zis.
(202) 1700 0790 0528 ass os6 | 02830226097
(826) 1750 0.813 0.542 0.406 0.325 or 0.232 0.203
(849) 1800 08% 0ss7 outs ose | 077 | oza7 | 0.2089
(873) 1850 0.859 0.573 0.430 0.344 0.286 0.246 O25
(397) 1900 08830588 addi 0383 | ome | 0282 | O21
(920) 1950 0906 0404 ——odS3 0362 ste 0s? 0.226
(944) 2000 0.929 0.619 0.465, 0.372 0.310 0.265 0.232
‘+ Damper at ful open postion [if ony].
act tout aor notice. L-06BCY
PES Peat ies
Engineering and Performance Data
Cine ec)
Pressure Drop (APH) versus Face Velocity (Vf)
z
90 (Po)
035
oa1
20
o27
70
0.23
0
ons.
40
PRESSURE DROP APt
0.20
50
30
ona
0.08
2
0.04
10
° 10 18 20 25 30 35 40 mis)
200 300 400 500 600 700 800 (fpr)
FACE VELOCITY VV.
Brenan
Case:
lMlustative Example =
Given Dota : Required Model : EAL
ArFiow Rate: 650 CFM (307 US}
‘Assume V1. not exceeding 1.5 m/s (300 FPM),
Reler lo page No. E06 Table EL-03, @ 650 CFM and
Vi. = LS m/sto,ead the related data as below
Pressure Drop = 8.0Pa (0.03 nwa}
Aen. 0.201 m?
By applying the At. volue to table No. EL-O1, simply
‘you can select the size ol 700 x $00 mm which is having
the neates! area value to the required one,
serves the ight ta make change wihaut porn
Case Il:
Mlustrative Example
Given Dala: Required Model = FAL c/w Filer
AirFlowRate 3500 CFM (1652 L/S}
‘Assume V1. not exceeding 1.5 m/s (200 FFM)
Since tne CFM given oul of the range of Table No.
E103 divide the ( 3500 | by (2) to give 1750 CFM ang
read tne related dara at this vaue as below
Pressure Drop = 8.0 Pa (0.03 nwa)
At 0,542 m2
By applying the A et, value lo lable No. EL02, simply
you can select the size of 950 x 900 mmm which is
having the nearest area value ta the required one.
Now, fo obtain the required 3500 CFM , double the
‘rea while maintaining the some heigh' as below
(2) x (4) = (980 x 2) x (900) mn
Final see = 1900x900 mn,PGES Eats
Crore
+ Available Surface Finishes For Exhaust And Fresh Air Louvers :
- Natural / Matt Silver Anodized .
- Powder Coating ( Standard Colors are white RAL 9010 / 9016, other optional colors if required
to be provided in RAL- No. only and charged extra).
- Aluminium in Mil Finish.
- Other Special Finishes ( on request if available )
‘+ Available Surface Finishes For Opposed Blade Damper :
~ Aluminium in Mill Finish (standard).
- Matt Black Powder Coating (optional).
* Ordering Specifications :
‘Specify :
- Louver Description / Model (Exhaust or Fresh, with or w/o Opposed Blade Damper).
- Wire Mesh [only mention if required}.
- Nominal / Neck size,
Quantity.
- Exhaust / Fresh Air Louvers Surface Finish.
- RAL- No.(only mention if powder coating surface finish is required).
- Type of Fixing (Concealed or Face Screw Fixing).
Thickness of Aluminium Filter for Fresh Air Louvers (only mention if optional 1 or 2" thickness
is required).
9 . Rubber Gasket (only mention if required).
10. Remarks if any.
oN oaRon—
Example 1
i
EAL +WM 200200 25 Mill _ ‘Concesied 7 _ _
(mm)
Example 2:
EERIE Ee
FAL 16'x 10" with
ciw - 400x250 7 Powtler 1013. screw =~ Rubber ~
Filter (mm) oma Lae Gostet
Example
i
FAL
30°x 20" .
chw 750x500 «1S SNe concen 2" = (Dovbie
Filter arnt ‘Anosized [Optional Frame}
+D
[SCI reserves he nght fo make changes withou! por natce L-08BC
BEST CHOICE INDUSTRIES L.L.C.
MANUFACTURING CENTRAL AIR CONDITIONING AIR OUTLETS
Tel. :04- 3471871 - Fax: 04- 3471671 - P.O. Box: 31567, Dubai - U. A. E.- Email: bci@emiates.net.ce