Beruflich Dokumente
Kultur Dokumente
ENG
DXT 9000
2015
DXT 7000
DXT 3000
In any place where people live and work, dangererous situations may occur, which require an effective and efficient
evacuation of affected areas, in conditions of maximum safety for all occupants and avoiding panic as much as
possible.
In these circumstances, time is precious and often each second saved means saving human lifes. For this reason the
use of Intelligent Evacuation Systems, designed to communicate clear and intelligible instructions is crucial.
Alarms transmitted using encoded tones, usually generated by sirens or sounders, are a suitable solution where
occupants are periodically trained to behave in a specific way depending on the specific alarm.
However in crowded places, where occupants are occasional or even strangers. They need to be reassured and guided
along safe routes, it is more effective to use a paging microphone and pre-recorded messages, performed in an
intelligible way and containing specific instructions on how to behave in situations of alarm or warning (e.g. how to
use escape routes).
Since 2011 the normative UNI ISO 7240-19 is in force, which introduces new rules and procedures for the design,
installation and maintenance of voice evacuation systems, also known as Sound Systems for Emergency Purposes
(SSEP), and the use of EN 54 compliant components.
The UNI ISO 7240-19 contains all information necessary for designers, installers, maintainance engineers and
construction companies. Electronics must include devices and strategies for self-diagnosis and protection, and must be
certified by accredited notified bodies according to EN 54-16, plus the loudspeakers must be in accordance with EN
54-24.
APPLICATIONS
Environments which are more critical in terms of occupants safety (since they are the most critical to be alerted and
evacuated) are those with the highest concentration of people. The risk is high and the area to evacuate particularly
extended.
Examples: hospitals, schools, shopping centres, sales areas, places of entertainment (cinemas, theatres, clubs, etc.),
densely populated buildings (offices buildings), plants (production sites, warehouses, etc.), powerstations, chemical
industries, railway stations, subways and airports are the most common structures.
SYSTEMS AVAILABILITY
An intelligent evacuation system EN54 compliant must be operational 24 hours a day, every day of the year.
In case of interruption of the primary power supply, it must be powered by a secondary source and its autonomy must
be guaranteed for at least 24 hours in a quiescent condition and for 30 minutes in a working condition.
These systems, on which safety depends at all times, must be maintained in perfect working order with periodic
inspections taking place.
Intelligent evacuation systems must also be connected to the fire detection system, so that they can react in a
programmed way without supervisory staff and communicate to the fire alarm system the status.
DXT 9000
CONFIGURATION SOFTWARE
DXT 9000 meets all restrictive requirements imposed by EN 54-16, adding advanced technological solutions, such as access to the system
through fall-back system; the powerful configuration diagnostics software is both comprehensive yet easy to use. Moreover, interconnection with
third-parties systems is available to facilitate the integration with alarm systems and building automation.
DXT 9000 is easy to install thanks to a few connections made with J-type fire-resistant cables and screw terminals connectors, easy to configure,
and economic in terms of fault-monitoring management and electric consumption, thanks to D+ technology, unique of RCF.
MU 9186
p/n 17170160
MASTER UNIT
DXT 9000 is the logical evolution to the RCF DXT Active Matrix solution range. To design DXT
9000, RCF has developed a digital multi-platform where PA-EVAC systems join PRO-INSTALL
systems in a completely scalable and versatile range of configurations and solutions.
It allows very flexible system architecture, driving in the same way professional amplifiers and
speakers, 100V amplifiers and commercial audio or EN 54-24 voice alarm speakers equipped
with line transformers.
In this architecture, MU 9186 is the MASTER UNIT without power on-board: it is used when
the system requires a high output power and/or a larger number of zones, and can be
obtained adding one or more power amplifiers model UP 9501 (1 x 500W), UP 9502 (2 x
250W) or UP 9504 (4 x 125W), connected through the dedicated RCF-Flexicomm data-link
port.
Main Features
Applications
Certifications
EN 54-16/2008
CE: it complies with European Community 2006/95/CE LVD and 2004/108/CE EMC.
Electromagnetic immunity according to IEC EN 55013+A1+A2, IEC EN 55020+A2+EC, EN 61000-3-2,
EN 61000-3-3+A1.
Electronic apparatus safety requirements according to IEC EN 60065:2002.
Shopping centers
Hospitals
Railway stations
Airports
Halls
Schools
Stadiums
Skyscrapers
SPECIFICATIONS
MAIN IN, FALL BACK INPUT audio inputs
- Input sensitivity:
- Frequency response (3 dB):
- Input impedance (1 kHz):
- Signal / noise ratio:
- FALL BACK command voltage:
PAGING IN (1, 2) audio inputs
- Input sensitivity:
- Frequency response (3 dB):
- Input impedance (1 kHz):
- Signal / noise ratio:
- Paging console power supply:
AUX INPUT
- Input sensitivity:
- Frequency response (3 dB):
- Input impedance (1 kHz):
- Signal / noise ratio:
BGM (1, 2, 3) audio inputs
- Input sensitivity:
- Frequency response (3 dB):
- Input impedance (1 kHz):
- Signal / noise ratio:
MONITOR OUT, AUX OUT, MOH audio
outputs
- Max. output level:
- Output impedance (1 kHz):
- Frequency response (3 dB):
- Distortion (THD+N @1W, 1kHz):
50 +6 dBu
20 Hz 20 kHz
25 k
104 dB
24 V c.c.
60 20 dBu
200 Hz 16 kHz
4 k
84 dB
24 28 V c.c.
50 +6 dBu
20 Hz 20 kHz
25 k
94 dB
50 +6 dBu
20 Hz 20 kHz
25 k
90 dB
1 W su 8
60
20 Hz 20 kHz
0,01%
- Net weight:
8
4
24 V c.c.
0,3 A
4
24 bit
44,1 kHz
100 mA
MX 9502
MX 9504
p/n 17170174
p/n 17170175
Main Features
Applications
Certifications
EN 54-16/2008
CE: it complies with European Community 2006/95/CE LVD and 2004/108/CE EMC.
Electromagnetic immunity according to IEC EN 55013+A1+A2, IEC EN 55020+A2+EC, EN 61000-3-2, EN
61000-3-3+A1.
Electronic apparatus safety requirements according to IEC EN 60065:200
Shopping centers
Hospitals
Railway stations
Airports
Halls
Schools
Stadiums
Skyscrapers
SPECIFICATIONS
MAIN IN, FALL BACK INPUT audio inputs
- Input sensitivity:
50 +6 dBu
- Frequency response (3 dB):
20 Hz 20 kHz
- Input impedance (1 kHz):
25 k
- Signal / noise ratio:
104 dB
- FALL BACK command voltage:
24 V d.c.
PAGING IN (1, 2) audio inputs
- Input sensitivity:
60 20 dBu
- Frequency response (3 dB):
200 Hz 16 kHz
- Input impedance (1 kHz):
4 k
- Signal / noise ratio:
84 dB
- Paging console power supply:
24 28 V dc
AUX INPUT
- Input sensitivity:
50 +6 dBu
- Frequency response (3 dB):
20 Hz 20 kHz
- Input impedance (1 kHz):
25 k
- Signal / noise ratio:
94 dB
BGM (1, 2, 3) audio inputs
- Input sensitivity:
50 +6 dBu
- Frequency response (3 dB):
20 Hz 20 kHz
- Input impedance (1 kHz):
25 k
Loudspeaker line outputs
- Output voltage:
100 V / 70 V (selectable
by RCF only)
- Number of internal amplifiers:
2 (MX 9502), 4 (MX
9504)
1 W on 8
60
20 Hz 20 kHz
0.01%
8
4
24 V dc
0.3 A
485 mm, 88 mm, 365
mm (2 unit rack 19)
MX 9502 - 8 kg
MX 9504 - 8,3 kg
- Net weight:
LINE A1 LINE A2
SERIAL NUMBER
Series
LINE B1 LINE B2
-
INPUT
-
48 V
POWER
15 A max
MONITOR OUT
BUS OUT
BUS IN
MX
EN54-16
COMPLIANCE STICKER
OUTPUT
FLEXCOM BUS
GND
ROUTINE MESSAGES
CTRL RS485
ETHERNET
PAGING IN 2
PAGING IN 1
MAIN IN
AUX OUT
BGM 2
MOH
MADE IN ITALY
MX 9502
BGM 1
CAUTION
WA R N I N G
++ - - ++ - - ++ - - ++ - -
AC VO LTAG E S E L E C TO R
A N D F U S E I N S I D E, REF ER
TO INSTRUCTION MANU A L
++ - - ++ - - ++ - - ++ - -
24V DC
MONITORED INPUTS
4
5
PHOTO-COUPLED INPUTS
10
11
12
Max 100 mA
AUDIO
GND
AUX INPUT
BGM 3
GND
CMD
WARNING
LINE A
SERIAL NUMBER
WA R N I N G
LINE B
-
Series
LINE C
-
LINE D
-
INPUT
-
POWER
MX
EN54-16
COMPLIANCE STICKER
OUTPUT
MONITOR OUT
BUS OUT
BUS IN
48 V
AC VO LTAG E S E L E C TO R
A N D F U S E I N S I D E, REF ER
TO INSTRUCTION MANU A L
FLEXCOM BUS
GND
ROUTINE MESSAGES
CTRL RS485
ETHERNET
PAGING IN 2
PAGING IN 1
MAIN IN
AUX OUT
BGM 2
MOH
MADE IN ITALY
MX 9504
BGM 1
CAUTION
++ - - ++ - - ++ - - ++ - -
++ - - ++ - - ++ - - ++ - -
24V DC
Max 100 mA
MONITORED INPUTS
4
5
PHOTO-COUPLED INPUTS
10
11
12
AUDIO
GND
AUX INPUT
BGM 3
GND
CMD
WARNING
UP 9504
p/n 17170170
UP 9502
p/n 17170162
UP 9501
p/n 17170161
POWER AMPLIFIERS
DXT 9000 is the logical evolution to the RCF DXT Active Matrix solution range. To design DXT 9000, RCF has developed a digital multi-platform
where PA-EVAC systems join PRO-INSTALL systems in a completely scalable and versatile range of configurations and solutions.
It allows very flexible system architecture, driving in the same way professional amplifiers and speakers, 100V amplifiers and commercial audio
or EN 54-24 voice alarm speakers equipped with line transformers.
In order to grant a high installation flexibility and output power on a larger number of zones, DXT 9000 includes three models of RCF ClassD+
power amplifiers, able to deliver up to 500W on 100V or 70V constant voltage speaker lines.
In mid-large size systems, models UP 9501 (1 x 500W), UP 9502 (2 x 250W) and UP 9504 (4 x 125W) can be connected to both MX 9502, MX
9504 and MU 9186 through the dedicated RCF-Flexicomm data-link port.
Moreover, each UP 9500 series amplifier unit can be programmed to become a hot stand-by unit for one or more main power amplifier, and
automatically replace any of them.
Main Features
Applications
Certifications
EN 54-16/2008
CE: it complies with European Community 2006/95/CE LVD and 2004/108/CE EMC.
Electromagnetic immunity according to IEC EN 55013+A1+A2, IEC EN 55020+A2+EC, EN 61000-3-2, EN
61000-3-3+A1.
Electronic apparatus safety requirements according to IEC EN 60065:2002.
Shopping centers
Hospitals
Railway stations
Airports
Halls
Schools
Stadiums
Skyscrapers
SPECIFICATIONS
FALL BACK INPUT audio input
- Input sensitivity:
- Frequency response (3 dB):
- Input impedance (1 kHz):
- Signal / noise ratio:
- FALL BACK command voltage:
AUX INPUT
- Input sensitivity:
- Frequency response (3 dB):
- Input impedance (1 kHz):
- Signal / noise ratio:
BGM 3 audio input
- Input sensitivity:
- Frequency response (3 dB):
- Input impedance (1 kHz):
Loudspeaker line outputs
- Output voltage:
50 +6 dBu
20 Hz 20 kHz
25 k
104 dB
24 V dc
50 +6 dBu
20 Hz 20 kHz
25 k
94 dB
50 +6 dBu
20 Hz 20 kHz
25 k
100 V / 70 V
(internal selection)
1 (UP 9501),2 (UP
9502), 4 (UP 9504)
500 W (UP 9501),
250 W (UP 9502),
125 W (UP 9504)
[100 V]
20 (UP 9501),
40 (UP 9502),
80 (UP 9504)
[ 70 V]
10 (UP 9501),
20 (UP 9502),
40 (UP 9504)
20 Hz 20 kHz
0.1%
8
4
24 V dc
0.3 A
4
24 bits
44.1 kHz
100 mA
485 mm, 88 mm,
365mm (2 unit
rack 19)
7,8 kg (UP 9501),
8,0 kg (UP 9502),
8,3 kg (UP 9504)
- Net weight:
SERIAL NUMBER
LINE B
-
Series
LINE C
-
LINE D
-
INPUT
-
POWER
UP
EN54-16
COMPLIANCE STICKER
OUTPUT
FLEXCOM BUS
BUS IN
BUS OUT
48 V
WARNI NG
MADE IN ITALY
LINE A
CTRL RS485
CAUTION
24V DC
MONITORED INPUTS
4
5
Max 100 mA
PHOTO-COUPLED INPUTS
10
11
12
AUDIO
GND
AUX INPUT
BGM 3
GND
CMD
WARNING
UP 9504
UP 9502
UP 9501
9
BM 9804
p/n 14380024
BE 9808
BM 9804FM
p/n 14380038
p/n 14380025
Main Features
Applications
Certifications
10
EN 54-16/2008
CE: it complies with European Community 2006/95/CE LVD and 2004/108/CE EMC.
Electromagnetic immunity according to IEC EN 55013+A1+A2, IEC EN 55020+A2+EC, EN 61000-3-2, EN 61000-3-3+A1.
Electronic apparatus safety requirements according to IEC EN 60065:2002.
SPECIFICATIONS
BM 9802 - BM 9804
Type:
Polar pattern:
Output impedance:
Microphone sensitivity:
Frequency response:
Dimensions:
Gooseneck length:
Net weight
electret
cardioid
470 (1 kHz)
65 dB 3 dB (0 dB=1V/bar, 1 kHz)
50 Hz 18 kHz ( 3 dB)
128 x 39 x 203 mm (without gooseneck)
445.5 mm
1.2 kg (2.7 lbs)
BM 9804FM
Dynamic
Omni-Directional
50030% (1KHz)
-70 dB 3 dB (0 dB=V/ bar, 1 kHz )
300 Hz 6 kHz ( 3 dB)
360 x 360 x 129 mm
6.9 kg (15.2 lbs)
BE 9808
Powered by BM 9802 / BM 9804 paging microphone.
Max. current draw:
80 mA (one BE 9808 keyboard
only)
Dimensions:
78 mm x 39 mm x 203 mm
Net weight
0.7 kg (1.6 lbs)
BM 9802
BM 9804
BE 9808
EOL 3-9
BM 9804FM
p/n 17170176
END OF LINE
20 Hz resonator, with an impedance of 200 Ohm at the resonance frequency. It allows to accurately monitor speakers lines integrity.
Suitable for DXT3000 and DXT9000
11
CONFIGURATION EXAMPLES
SMALL SIZE SYSTEM
MX 9500
ACTIVE SPEAKERS
VVFF
MQ 50
MicrophoneVVFF
MX 9500
MQ 50 C
BM 9802
BM 9804 +
BE 9808
MQ 50 C
PC
MQ 50
MS 1033
MQ 50
MU 9186
ACTIVE SPEAKER
SC 9640
Pannello VVFF
Microphone VVFF
MQ 50
UP 9502
LINEA SPEAKERS100 V
MU 9186
UP 9502
BM 9802
BM 9804 +
BE 9808
MQ 50 C
MQ 50 C
PC
UP 9501
MQ 50
MS 1033
UP 9504
MQ 50
MQ 50
TS 9918
UP 9501
MQ 50 C
MQ 50 C
12
LINEE SPEAKERS100 V
MU 9186R
MAIN SYSTEM
LINE SPEAKERS
BM 9804FM
VVFF
UP 9502
BM 9802
MQ 50 C
SATELLITE SYSTEM 2
UP 9501
BM 9804 BE 9808
MS 1033
Audio input
SWITCH
MQ 50
To other
subsystem units
UP 9504
MQ 50
MU 9186R
UP 9501
MQ 50 C
SWITCH
NU 9000
PC / BMS
SWITCH
SATELLITE SYSTEM 1
To other
subsystem units
SWITCH
MQ 50 C
UP 9502
BM 9802
BM 9804 BE 9808
MU 9186R
TS 9918
MU 9186R
UP 9504
MQ 50
SWITCH
MS 1033
MQ 50 C
input cable
SATELLITE SYSTEM 3
redundant ethernet
13
14
DXT 7000
MEDIUM SIZE APPLICATIONS
DXT 7000 is a sound system conceived to completely control and manage background music and paging, even for emergency and evacuation
purposes.
The system has been designed to fulfil all requirements of EN 54-16 and EN 60849 standard, and it is really scalable, suitable for a wide range
of applications: in fact p to 32 MU 7100 EN can be linked together in order to get an extended system, including many paging stations and up
to 256 loudspeaker lines / paging zones.
The main unit can play all necessary evacuation and alarm messages previously stored into its built-in digital memory.
The 8 internal digital amplifiers are highly reliable and their efficiency is excellent (> 90%): that means less heat dissipation and smaller
PATH MONITORING
capacity required for unbreakable power supply sources (UPS) used in security applications.
A digital Matrix 7x8 is configurable for several applications with routing to any output channel, supported by an efficient Digital Signal
Processor (DSP) providing Band Parametric EQ, Filters, Delay circuit for line arrays, Compressor / Limiter and Level controls.
A software utility is available for saving unit parameters to PC, updating unit firmware, virtual control activation and status indication.
15
MU 7100EN
p/n 17170157
MU 7100 is the main unit of the innovative RCF DXT 7000 system, which has been designed to fulfill all requirements of EN 54-16 and EN
60849 standard. The whole signal path from firemans microphone to loudspeaker lines is completely and automatically monitored against
faults. All properties and functions of the system are specified with Windows based DXT 7000 configuration software and are downloaded to
master unit through its USB port.
Main Features
Applications
16
The system has been designed to fulfill all requirements of EN 54-16 and EN
60849 standard
Up to 32 units can be linked together in order to get an extended the
systems
Up to 256 loudspeaker lines and many paging stations
The 8 digital internal amplifiers are highly reliable and excellent efficiency
Small capacity requirement for unbreakable power supply sources (UPS)
used in security applications
The main unit can play all necessary evacuation and alarm messages previously stored into its built-in digital memory
Digital Matrix 7 x 8 is configurable for several applications with routing to
any output channel
An automatic level control facility can be got by simply connecting an omnidirectional noise detection microphone to the inputs
Efficient Digital Signal Processor (DSP): 5-Band Parametric EQ, High and
Low Pass Filters, Compressor / Limiter, Level controls are provided
Delay circuit for line array speaker applications
Built-in WAV fi le message player (up to128 messages)
Shopping centers
Hospitals
Railway stations
Airports
Halls
Schools
Stadiums
Skyscrapers
SPECIFICATIONS
Analogue input 17 sensitivity
Analogue input impedance
System and local bus audio (balanced)
Digital message signal format (WAV)
-40 + 6 dBu
20 k (bilanciato)
S/PDIF
+ 6 dBu
ris. 16 bit, freq.
camp. 32 kHz
20 Hz 20 kHz
96 dBA
< 0,05%
100-240VAC, 50-60
Hz
Classe I
40 990 W
tipico 0,95
2 x T3.15A
5 +50 C
20 90% RH
non-condensante
485 mm, 86mm,
375 mm
8,4 kg
8 x 80W RMS
8
Dimensions (w, h, d)
Net weight
MU 7100EN
100-240V
45-63Hz
40-980W
SYSTEM
3,15T
RS-232
LOCAL
CTRL
LT 7208
CH2
CH3
CH4
CH5
CH6
CH7
24VDC
CH8
IN
48VDC 2x7A
OUT
MIC/LINE INPUT
CONTROL OUTPUT
4
5
6
SR No
IN
LOCAL
4
5
6
CONTROL INPUT
USB
SYSTEM
BUS
BUS
LINK
Certifications
EN 54-16/2008
CE: it complies with European Community 2006/95/CE LVD and 2004/108/CE EMC.
Electromagnetic immunity according to IEC EN 55013+A1+A2, IEC EN 55020+A2+EC, EN 61000-3-2, EN 61000-3-3+A1.
Electronic apparatus safety requirements according to IEC EN 60065:2002.
LT 7208EN
MT 7308EN
CH1
CH2
CH3
CH4
CH5
CH6
CH7
SR No
p/n 17170159
SPEAKER LINE OUTPUTS 50/70/100V
24VDC
CH8
IN
CTRL
IN
LINE 1
OVERRIDE
LINE 2
OVERRIDE
LINE 3
OVERRIDE
LINE 4
OVERRIDE
LINE 5
OVERRIDE
LINE 6
OVERRIDE
LINE 7
OVERRIDE
LINE 8
OVERRIDE
MT 7308 is suitable to control up to 8 additional power amplifiers and relevant speaker lines, according to EN 54-16 norm. It works connected
to the MU 7100EN master system unit. When speaker lines drive high power loads, it could be convenient to optimize the system configuration
by using one or more dedicated power amplifiers dimensioned according the loads involved.
17
LT 7208 EN
p/n 17170156
The LT 7208 EN unit has 8 internal transformers (80 W / each) to convert the 8 Ohm loudspeaker outputs of the MU 7100 central unit into
constant voltage lines (100 - 70 - 50 V) for loudspeakers having transformers.
The possible combinations are 8 x 80W, 4 x 160 W and 2 x 320W (or any combination from these).
Main Features
Applications
The LT 7208 EN line transformer interface allows you to link/ group the 8 amplifiers to increase the power of the speaker lines two, three or four times
If the needed speaker line power is more than 80W, several outputs (in groups
made of 2, 3 or 4) can be connected together (in parallel) in order to get locked
groups for 160 W, 240 W or 320 W lines
Output line voltage setting (50-70-100 V) is made by changing the output
tapping of each transformer
Includes also line specific 24V dc outputs for override relays (max. current: 1A /
line)
Connection cable to MU 7100 EN main unit 8 pcs. of end of line unit, used
when the loudspeaker line monitoring is provided
The end of line unit shall be installed right at the end of the line, near the last
installed loudspeaker
Shopping centers
Hospitals
Railway stations
Airports
Halls
Schools
Stadiums
Skyscrapers
MU 7100EN
100-240V
45-63Hz
40-980W
SYSTEM
Specifications
3,15T
RS-232
Input impedance
CH2
CH3
CH4
CH5
CH6
CH7
24VDC
CH8
48VDC 2x7A
OUT
IN
IN
8
100 V (on request:
70 50 V)
80 W
483 mm, 88 mm, 382
mm (19 two-unit
rack)
13 kg
Output voltage
Max. power (single output)
Dimensions (w, h, d)
Net weight
LOCAL
CTRL
LT 7208
Certifications
8
SR No
LOCAL
4
5
6
CONTROL INPUT
USB
SYSTEM
BUS
BUS
SR No
18
CH2
CH3
CH4
CH5
CH6
CH7
24VDC
CH8
IN
CTRL
IN
LINK
EN 54-16/2008
CE: it complies with European Community 2006/95/CE LVD and 2004/108/
CE EMC.
Electromagnetic immunity according to IEC EN 55013+A1+A2, IEC EN
55020+A2+EC, EN 61000-3-2, EN 61000-3-3+A1.
Electronic apparatus safety requirements according to IEC EN 60065:2002.
LT 7208EN
CH1
MIC/LINE INPUT
CONTROL OUTPUT
4
5
6
LINE 1
OVERRIDE
LINE 2
OVERRIDE
LINE 3
OVERRIDE
LINE 4
OVERRIDE
LINE 5
OVERRIDE
LINE 6
OVERRIDE
LINE 7
OVERRIDE
LINE 8
OVERRIDE
UP 8501
UP 8502
p/n 12135070
p/n 12135077
482
REAR VIEW
1124 g
UP 8501
mm
44
375
UP 8502
482
1168 g
UP 8502
mm
44
375
UP 8502
482
SPECIFICATIONS
UP 8501
UP 8502
1 X 500 W
2 X 250 W
40
HZ
16
kHz
44
UP 8504
375
200 HZ 8 kHz
482 0.3%
MAX.
86 DB
0
dBu
(775
mV, max. 7 V)
44
375
UP 85040 20 dBu (775 78 mV, max. 7 V)
482(775 mV)
0 dBu
10 k
10
20
4420
40
375
20 dB
482
Da rete: 115 230V c.a. 10%, 50 60 Hz (internal voltage selector)
Batteries: 48 V d.c. 10%
3W
13 W
15 W
20 W
25 W
36 W
50 W
160 W
650 W
800 W
0 55 C; Humidity: max 90%
482 mm, 44 mm, 375 mm (1 rack unit 19)
5.1 KG
5.3 KG
19
UP 8504
p/n 12135079
UP 8501
44
375
REAR VIEW
UP 8504
1212 g
mm
44
375
482
SPECIFICATIONS
UP 8504
4 X 125 W
40 HZ 16 kHz
200 HZ 8 kHz
MAX. 0.3%
86 DB
0 dBu (775 mV, max. 7 V)
0 20 dBu (775 78 mV, max. 7 V)
0 dBu (775 mV)
10 k
40
80
overload, short circuit, overheating
Da rete: 115 230V c.a. 10%, 50 60 Hz (internal voltage
selector) Batteries: 48 V d.c. 10%
3W
20 W
50 W
160 W
650 W
800 W
0 55 C; Humidity: max 90%
482 mm, 44 mm, 375 mm (1 rack unit 19)
5.5 KG
BM 7608
BM 7608D
BM 7601
p/n 14322015
p/n 14322016
p/n 14322017
MICROPHONE CONSOLE
WITH 8 CONFIGURABLE
BUTTONS
DESK-TOP PAGING
MICROPHONE WITH
CONFIGURABLE BUTTON
BM 7608 - BM 7608D
BM 7601
AC 7212
SI 7120
RO 7102
p/n 17170152
p/n 17170153
p/n 17170151
BM 7608DFM
BM 7624D
p/n 14322014
p/n 14322018
SV 7982
BM 7608DFM - BM 7624D
p/n 17170140
22
LI 7903
p/n 17170141
REMOTE LOCAL
INPUT / CONTROL DEVICE
CONFIGURATION EXAMPLES
SMALL SIZE SYSTEM
SV 7982
LI 7903
BM 7608D
MS 1033
MU 7100
LT 7802
VVFF
MQ 50
MQ 50 C
MQ 50 C
input cable
LT 7802
MQ 50
MQ 50 C
BM 7608D
MS 1033
MU 7100
LT 7802
MQ 50
MQ 50 C
MQ 50 C
input cable
23
LT 7802
MQ 50
MQ 50 C
BM 7608D
BM 7608D
MS 1033
MU 7100
MU 7100
LT 7802
LT 7802
MQ 50
MQ 50
MQ 50 C
MQ 50 C
MQ 50 C
MQ 50 C
MQ 50 C
SUB SYSTEM 3
SUB SYSTEM 2
24
MS 1033
input cable
OC 7302
PS 4048
PS 6048
p/n 17170158
p/n 17170169
PS 6048 and PS 4048 are a power supply units suitable to get continuity power for EN 54-16 systems units like DXT 9000 and DXT 7000, and
relevant complementary devices in case of mains power supply interruptions. They include recharging and monitoring functions for the lead-acid
batteries connected to them. They must be equipped with batteries with suitable capacity, dimensioned according to the system power absorption
and to the evacuation requirements. According to EN 54-16 standard, PS 6048 and PS4048 shall be installed into the same rack cabinet where
there is the audio system with emergency purposes (or a system part) to which it is connected
SPECIFICATIONS
PS 4048
PS 6048
48 V DC
48 V DC
54.4 V dc 0.5%
54.4 V dc 0.5%
8A
12 A
Nominal power
400 W
Battery voltage
48 V DC (4 x 12 V)
48 V DC (4 x 12 V)
38 140 Ah
CJ 228E
CJ 428E
p/n 143.80.017
p/n 143.80.021
Fire resistant cables for data with conductor thickness of 0.8 mm shielded. Color of the outer cover Red. Inner conductors colors Yellow, Grey, Blue,
Red. Certification VDE 0815, DIN 4102, EN 50200 PH 120, EN 60332-1-2, EN61034-2, FIPEC (EN) Coils of 200 m. The construction process consists
in conductors isolation using a layer of silicon rubber. The core is then separated into two twisted pairs together and screens, subsequently the outer
sheath is applied with a process of compression seeds.
25
26
DXT 3000
ADVANCED TECHNOLOGY
27
MX 3250
p/n 17170177
Main Features
Applications
28
Halls
Schools
Shopping Centers
Offices
Public buildings
SPECIFICATIONS
OUTPUT POWER
Frequency response:
Distortion (THD + N):
Output voltage to speaker lines:
Signal / noise ratio:
Operating voltage (mains):
Operating voltage (batteries):
Nominal Load
Mains Input Power
Battery Input Current
Battery Capacity
Ambient operating temperature
Certifications
EN 54-16: 2008 - Fire detection and fire alarm systems. Part 16: Voice alarm control and indicating equipment.
EN 54-4: 1997 +A1: 2002 +A2: 2006 - Fire detection and fire alarm systems. Part 4: Power supply equipment.
CE: it complies with European Community 2006/95/CE LVD and 2004/108/CE EMC.
Electronic apparatus safety requirements according to EN 60065 :2002 +A1 :2005 +A11 :2008.
Electromagnetic immunity according to EN 55013 :2001+A1 +A2 / EN 55020 :2007 +A11 / EN 61000-3-2 :2006 +A2 / EN 61000-3-3
:2008.
29
BM 3804
BM 3804FM
p/n 14380028
BM 3804 is a desktop paging microphone exclusively dedicated for the RCF DXT 3000 system. It can be directly connected to the MX 3250
main unit through a fourpair J-type fire-rated cable.
Up to four BM 3804 paging microphones (interlocked one another) can be linked (daisy-chained) to the line. The first BM 3804 paging
microphone (of the line) is directly powered by the MX 3250 main unit, while the second, the third and the fourth need 24 V dc adapters (500
mA, i.e. RCF AC AD 2405, optional).
MT 5708 -2
BM 5804 -3
BM 3804 is also available in Firemen version, hosted in a closed wall mounting red metal cabinet, with glass door to access console status.
1.100
This version is equipped with dynamic microphone, with incorporated push to talk button,
andg can be used in combination with a BE 3806 (also
installed inside the cabinet), to improve selective calls efficiency.
BE 3806
387
483 ADDITIONAL
452
44
377
39
483
p/n 14380036
PU 5218 -7
BE 5808 -6
203
452
132
203
128
78
39
(mm)
203
128
p/n 14380037
PU 5218
376
483
(mm)
MU 7100 -10
PB 5310 - 9
BE 3806 is an additional keyboard, which has six buttons for the six-zone selection of a complete MX 3250 main unit (with two or three
amplifier boards).
PB 5310 Power Bridge
88
158
178
EOL 3-9
63
DR 5301-P
483
158
(mm)
END OF LINE
375
178
p/n
17170176
BM
7801FM
- 11
(mm)
BM 7802 - 12
330
382
483
80
80
277
125
277
125
20 Hz resonator, with an impedance of 200 Ohm at the resonance frequency. It allows to accurately monitor speakers lines integrity.
Suitable for DXT3000 and DXT9000
CONFIGURATION EXAMPLES
BASIC CONFIGURATION
ZONE 2
VVFF
MS 1033
A
B
BM 3804
BM 3022
ZONE 1
input cable
EXTENDED CONFIGURATION
VVFF
ZONE 4
MS 1033
ZONE 3
B
A
B
A
BM 3804
BE 3806
B
A
B
A
ZONE 2
BM 3022
ZONE 1
BM 3022
input cable
32
PL 70EN
60
75
p/n 13133065
PL 8XMain
- 26Features
73
28
PL 70BS - 29
7
16
230
200
150
31
230
127
DM 41 - 32
SPECIFICATIONS
Loudspeaker
150
95 dB (1 W / 1 m)
104
Angle of coverage
Connector
Frequency Response
91 Body colour
150
115
130RAL 9003
White
Flush-mounting hole
218 mm
30 mm
Net weight
Operating temperature
Relative humidity
Certification
2 kg
-25 to +55
90% non condensing
EN 54-24:2008
33
PL 68EN
p/n 13133082
Main Features
2,4
200
220
96
SPECIFICATIONS
Loudspeaker
Power (on 8 Ohm load)
Power
Sensivity
94 dB (1 W / 1 m)
Mx. SPL
Frequency Response
Angle of coverage
Connector
130 Hz 20 kHz
140
Ceramic terminal block
Body colour
Grill material
Steel
Dimensiones
220 mm x 96 mm
Flush-mounting hole
200 mm
30 mm
Net weight
1.34 kg
Operating temperature
Relative humidity
Certification
34
-25 to +55
90% non condensing
EN 54-24:2008
DP 5EN
p/n 13133076
Main Features
SPECIFICATIONS
Type:
Transducers:
Sensitivity (1 W, 1 m):
101 dB
89 dB
80 Hz 20 kHz
Horizontal coverage:
160
20 10 5 2.5W
Input impedance:
Enclosure material:
Use:
IP grade:
Dimensions (without bracket):
Colour:
Net weight:
Certification
500 1 k 2 k 4 k
ABS
indoor outdoor
IP 65
180 mm, 260 mm
white
2.8 kg
EN 54-24:2008
35
BD 5EN
p/n 13133077
Main Features
2 x 5 full range speakers for alarm voice messages broadcasting and high quality background music
ABS cabinet with steel mesh grille.
It can be installed both indoors and outdoors (IP 65 protection
grade).
Equipped with transformer for 100 V (/ 70 V) constant voltage
lines.
Internal power setting.
Ceramic screw terminal for connection.
Internal thermal fuse.
Color: white.
SPECIFICATIONS
Type:
Transducers:
2 x 5
Sensitivity (1 W, 1 m):
86 dB
99 dB
87 dB
150 Hz 18 kHz
Horizontal coverage:
20 10 5 2.5W
Input impedance:
Enclosure material:
Use:
IP grade:
Dimensions (without bracket):
Colour:
Net weight:
Certification
36
500 1 k 2 k 4 k
ABS
indoor outdoor
IP 65
180 mm, 340 mm
white
3.5 kg
EN 54-24:2008
BS 5EN
p/n 13133078
PENDANT SPEAKER
Main Features
SPECIFICATIONS
Type:
Transducers:
Sensitivity (1 W, 1 m):
101 dB
89 dB
80 Hz 20 kHz
Horizontal coverage:
160
20 10 5 2.5W
Input impedance:
Enclosure material:
Use:
IP grade:
Dimensions (without bracket):
Colour:
Net weight:
Certification
500 1 k 2 k 4 k
ABS
indoor outdoor
IP 65
180 mm, 260 mm
white
2.2 kg
EN 54-24:2008
37
DP 1420EN
p/n 13133065
Main Features
DP 4 - 12
The DP 1420EN sound projector is elegant and suitable for sound
distribution in very large environments. These have a cylindrical fire
215
protection steel body and
an U bracket support in aluminum for the
installation. The projector incorporates a 130 mm (5) loudspeaker.
It includes a transformer inside for the connection to (100 70
V) constant voltage lines. Thanks to its ceramic termination blocks
146 of withstanding temperatures in excess of 650 C/202137
(capable
F),
its thermal fuse (threshold: 150 C/ 302 F) and its fire-resistant
cable, the speaker does not allow fire to move to the audio system.
DP 1 TG - 13
245
215
DP 2X -15
DB 1420 - 16
200
176
136
155
146
205
200
CS 2012 - 18
SPECIFICATIONS
CS 2020- 19
73
90
Loudspeaker
Power (on 8 Ohm load)
Power
5 extended range
65
402
6520 W - 10 W
Sensivity
615
- 5 W (100V)
91 dB (1 W / 1 m)
Mx. SPL (6 W / 1 m)
Frequency Response
150 Hz 20 kHz
Angle of coverage
CS 6940 - 21
Body colour
160
CS 6520EN - 20
Connector
184
114
4 conductor cable
184
Dimensiones
38
90
73
146 mm x 200 mm
96
956
96
Aluminium 620
U bracket
127 mm
1 meter
2.5 kg
-25 to +55
90% non condensing
EN 54-24:2008
BD 2412EN
p/n 13133064
200
160
Main Features
DP 1/STK - 14
Bidirectional sound projector with double loudspeaker, characterized by high acoustic performance, excellent design and
compact dimensions
Complying with EN54-24 standard thanks to ceramic termination block, thermal fuse and internal fire-resistant cable
IP 55 protection, suitable for outdoor use
200
Its idea for train stations, underground stations, car parks,
160 factories, warehouses, and PA systems in general
Continuous nominal power: 20/10/5 W ([100 V]
245
245
DB 1420 - 16
BD 2412 - 17
100
150
200
155
146
175
146
186
200
CS 2020- 19
SPECIFICATIONS
CS 6520 - 20
90
73
184
Type:
114
bidirectional sound projector
Transducers:
65
Sensitivity (1 W, 1 m):
615
96
580
2 x 5
89 dB
102 dB
90 dB
130 Hz 20 kHz
CS Dispersion:
6520EN - 20
20 10 5 W
184
114
Enclosure material:
aluminium alloy
Use:
IP grade:
Dimensions (without bracket):
Colour:
Net weight:
Certification
500 1 k 2 k
indoor outdoor
96
620
IP 66
146 mm, 184 mm
light grey
3.3 kg
EN 54-24:2008
39
176
6
205
CS 6520EN
155
146
200
p/n 13133079
COLUMN SPEAKER
CS 2012TWO-WAY
- 18
CS 2020- 19
Main Features
90CS 6520
73very compact dimensions, the
Two-way speakers with
EN features 4 round extended-range speakers and a tweeter. This
model utilizes a series of innovative technological solutions that
guarantee highly intelligible reproduction of the vocal message. It
s complete with line transformer
65 for directly connecting
402 the speaker
columns to 70 V or 100 V constant-voltage systems and, thanks
to multiple sockets, permit selecting the power to be diffused from
among various values. Thanks to IP 66 insulation, the speaker
columns can also be used out of doors. Usable in railway stations,
subways, churches, factories, warehouses, PA systems in general.
CS 6940 - 21
90
73with high intelligibility in acouIdeal for speech reproduction
stically diffi cult environments, both indoors and outdoors, also
suitable for music
Music power/RMS: 40/20W
Four 3 mid-woofer speakers and one central 20mm tweeter
65
615
Weather-resistant construction IP 66 for use also outdoors,
sturdy hinged support in resin, stainless steel fasteners
Body in aluminium and front grille in steel bake-painted RAL
9003 White
Articulated support for wall mounting included
EN 54-24 certified
CS 6520EN - 20
184
114
184
114
96
956
96
620
SPECIFICATIONS
Loudspeaker
Power (on 8 Ohm load)
Power
Sensivity
92 dB (1 W / 1 m)
Mx. SPL
Frequency Response
Horizontal angle of coverage (-6 dB)
140 Hz 20 kHz
360 (500 Hz), 185 (1 kHz), 134 (2 kHz), 98 (4 kHz)
Connection
Body colour
Painted aluminium.
Steel
580 mm x 114 mm x 96 mm
Orientable support included
88 mm
Net weight
4.5 kg
Operating temperature
Relative humidity
Certification
40
-25 to +55
90% non condensing
EN 54-24:2008
11
DU 50EN
p/n 13133064
ALUMINIUM SPEAKER
Main Features
DU 50BS - 3
60
260
164
164
CSB-1T - 6
SPECIFICATIONS
150Loudspeaker
240
Sensivity
91 dB (1 W / 1 m)
184
Mx. SPL (6 W / 1 m)
234
Frequency Response
200 Hz 12 kHz
Angle of coverage
Connector
4.5 woofer
188wide band dual cone
237
Body colour
WS 620 XT - 9
Grill material
Steel
14
81Dimensiones (HxWxD)
18
Installation
164 mm x 164 mm x 60 mm
Screw anchors
Drilling template
163.5 mm x 163.5 mm
Net weight
284
Operating temperature
165 2 kg
132
-25 to +55
Relative humidity
Certification
EN 54-24:2008
169
115
41
p/n 13133083
ENGLISH
DU 60EN
SPECIFICATIONS
Main Features
Input voltage:
Power (selectable) at 100V:
100 V ( / 70 V)
6 3 1.5 0.75 W
(power values are halved at 70 V)
Steel construction.
Input impedance:
1.67 3.33 6.67 13.33 k
Dual cone 5 loudspeaker.
Frequency response:
Hz 20 kHz (10 dB)
Transformer for connection to 100 V (/ 70 V)100constant
voltage
Sensitivity:
92 dB (1 W, 1 m), 80 dB (1 W, 4 m)
lines.
Max. sound pressure level:
100 dB (6 W, 1 m), 88 dB (6 W, 4 m)
Power selection among four values.
Opening angle:
180 (1 kHz), 115 (4 kHz)
Ceramic terminal strips.
Transducer:
5 dual-cone
Thermal fuse that prevents damage to the audio
line due to
heat on the speaker. Applicable wire section: 1 4 mm
In compliance with norm EN 54-24Colour: white
Colour: RAL 9016 WhiteBody and grille material: steel
Connectors:
Net weight:
Operating temperature:
Dimensions:
35
3.5
40
180
155
165
195
mm
10
SPECIFICATIONS
Type:
Transducers:
Sensitivity (1 W, 1 m):
Max. sound pressure (20 W, 1 m):
Frequency response (10 dB):
Angle of coverage
Power taps (100 V):
Input impedance:
5 dual-cone
92 dB
100 dB
100 Hz 20 kHz (10 dB)
140
6 - 3 - 1.5 - 0.75 W
1.67 3.33 6.67 13.33 k
Enclosure material:
steel
IP grade:
IP 65
42
ITALIAN
HD 21EN
DATI TECNICI
TENSIONE DINGrESSO:
pOTENZA (SELEZIONABILE):
p/n 13133075
100 v 70 v
30 w 15 w 7,5 w 3,75 w (100 v)
15 w 7,5 w 3,75 w 1,875 w (70 v)
IMpEDENZA DINGrESSO:
Main Features
HD 21EN is a 30W horn loudspeaker compliant with EN 5424 standard. Thanks to IP66 protection and its UV resistant
ABS housing and it is suitable for both indoors and outdoors
applications.
It can be easily aimed towards any direction through the adjustable
wall-mount bracket, and can used in sounds systems having large
spaces, for instance supermarkets, railway stations, undergrounds,
factories, warehouses, etc. and also in all environments that need
high efficiency loudspeakers grade. Equipped with transformer for
100 V / 70 V constant voltage lines, internal power setting and
ceramic terminal strip to link cables, it also has a thermal fuse that
prevents damages to the audio line due to heat.
grigio chiaro
morsettiera ceramica
ip 66
2,05 kg
25 +70 c
DIMENSIONI
211,79
279,30
151,36 mm
105,90
60,00
7,00
SPECIFICATIONS
18
Input voltage :
Power (selectable ):
Input impedance :
Frequency response (10 dB):
Sensitivity:
Max. sound pressure level:
Cove rage angle (6 dB):
Housing material:
Colour:
Connector:
IP protection grade:
Net weight:
Operating temperat ure:
Certification
100 V 70 V
30 W 15 W 7.5 W 3.75 W (100 V), 15 W 7.5 W 3.75 W 1.875 W (70 V)
333 (30 W 100 V / 15 W 70 V), 667 (15 W 100 V / 7.5 W 70 V), 1.33 k
(7.5 W 100 V / 3.75 W 70 V), 2.67 k (3.75 W 100 V / 1.875 W 70 V)
340 Hz 9 kHz
104 dB (1 W, 1 m), 92 dB (1 W, 4m)
119 dB (30 W, 1 m), 107 dB (30 W, 4 m)
210 (500 Hz), 135 (1 kHz), 70 (2 kHz), 40 (4 kHz)
ABS
light grey
ceramic screw terminal
IP 66
2.05 kg
25 +70 C (13 +158 F)
EN 54-24:2008
43
HD 6045EN
p/n 13133085
Main Features
560
620
475
SPECIFICATIONS
Type:
Transducers:
4 x 50W drivers
Sensitivity (1 W, 1 m):
101 dB
133 dB
200 W RMS
Constant voltage:
100 V / 70 V
Impedance:
Enclosure material:
Dimensions (without bracket):
Colour:
Net weight:
Certification
44
horn speaker
16
fiberglass
h 475 mm (18.7), w: 560 mm (22), d 620 (24.4)
grey
21.4 kg
EN 54-24:2008
CV 215
p/n 14380031
CV 225
p/n 14380032
The CV series cables are suitable for the transmission of electrical signals and commands for those applications where maximum security is required
in situations of fire alarm. Ensures transmission of the signal to emergency speakers even when exposed to flames, allowing the safe evacuation of
the environments in which it is installed. For fixed installation indoors in wet or normal environments, and temporarily outside. It can be installed on
platforms, pipes, conduits and similar systems.
45
RACK
COMPONENTS
FOR THE OPTIMUM MANAGEMENT OF THE
SYSTEM CONFIGURATIONS.
46
MODEL
CR 2615
CR 2615 FV
CR 2628
CR 2642
Part number
171.70.080
171.70.129
171.70.081
171.70.082
Type
15 U
15 U
28 U
42 U
Base dimensions
600 x 600 mm
600 x 600 mm
600 x 600 mm
600 x 600 mm
Height
800 mm
800 mm
1600 mm
2000 mm
Weight
26 Kg
30 Kg
54 Kg
68 Kg
Max load
105 Kg
100 Kg
320 Kg
350 Kg
Ventilation
Thermostat controlled
Thermostat controlled
Thermostat controlled
3130 W
3280 W
3320 W
2070 W
2160 W
2180 W
Included accessories
Model door
AK 2615
AK 2615
AK 2628
AK 2642
(173.60.028)
(173.60.028)
(173.60.029)
(173.60.030)
CR
2600
RACK ENCLOSURES
RR 2601
AR 2605
FRAME WITH
POWER SOCKETS
p/n 17360027
AR 1050-N
AR 1051-N
P AER1
FRONT VENTILATION
PANELS
p/n 17130149
AR 1052-N
CLOSURE PANELS
PU 1
PU 2
p/n 17170145
1U Closure Panel
RAL 9005 Nero
p/n 17170146
2U Closure Panel
RAL 9005 Nero
PU 3
p/n 17170147
3U Closure Panel
RAL 9005 Nero
PU 4
p/n 17170148
4U Closure Panel
RAL 9005 Nero
47
SA 2095
p/n 17130046
Allows centralised switch-on of the equipment installed in the rack enclosure and directly connected
to the 230 Vac 8A output.
6 unbalanced inputs on terminal strip 775mV for
pre-listening to sound sources, selection switch
Balanced inputs on terminal strip for 100/70/50V
power amplifier for audio monitoring of six amplifiers at constant voltage, selection switch
Internal monitor loudspeaker with volume control,
LED VU Meter
1U 19 rack
Color: grey RAL 7021
Control unit for rack systems, to insert on the audio chain between
6 sources and the power amplifier.
The LED VU-meter and built-in monitor loudspeaker make it possible
to control the low level signal of six audio sources or the signal on
the speaker outputs of six power amplifiers.
Controls both constant voltage and constant impedance speaker
outputs.
Makes it possible to drive a power amplifier with one of the six
sources that can be connected to the inputs.
The AC OUTLET enables centralized switch-on/off of the equipment
installed in the rack.
2900 g
mm
271
VENTILATION UNIT
88
483
483
ALARM
48
MESSAGES
POWER
483
SA 2095
SIGN
PLAY
44
SPECIFICATIONS
VOLUME
MIC 1
383
REC
PAUSE
STOP
SIREN
MONITOR
0
MESSAGE
10
10
SIREN
PEAK
10
MONITOR
SPEAKER
44
POWER
POWER
483
244
RT 2006
p/n 17170125
RACK CONNECTIONS FOR POWER TRANSFORMERS
TD 300-TD 500-TD 1000
2700 g
mm
44
271
VENTILATION UNIT
88
483
483
SPECIFICATIONS
VOLUME
1
44
383
SIGN
PEAK
POWER
MIC 1
ALARM
MESSAGES
PLAY
REC
PAUSE
STOP
SIREN
MONITOR
483
0
MESSAGE
10
10
SIREN
10
MONITOR
SPEAKER
POWER
49
PV 2603
p/n17170137
VENTILATION UNIT
PV 2603 is a ventilation unit composed by 3 blowers (230 V ac) and a main switch.
The blowers turn on due to the activation command of a thermostat included ia all RCF CR 2600 rack cabinets series.
5000 g
mm
44
271
VENTILATION UNIT
88
483
TD 300
VOLUME
MIC 1
ALARM
MESSAGES
SIGN
PLAY
REC
PAUSE
STOP
SIREN
MONITOR
0
MESSAGE
10
10
SIREN
PEAK
10
MONITOR
SPEAKER
POWER
244
p/n 171.70.126
TD 500
p/n 171.70.127
500W PROFESSIONAL AUDIO TOROIDAL TRANSFORMER
TD 1000
p/n 171.70.128
50
44
02/2015-IG
HEADQUARTERS:
RCF UK
RCF France
tel. +33 1 49 01 02 31
e-mail: france@rcf.it
RCF Germany
RCF Spain
RCF Benelux
www.rcf.it
10116178
tel. +1 732-9026100
e-mail: info@rcf-usa.com